[PATCH 4.19 00/58] 4.19.194-rc1 review

[PATCH 4.19 00/58] 4.19.194-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.194 release.
There are 58 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu, 10 Jun 2021 17:59:18 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.194-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.194-rc1

Jan Beulich <jbeulich@suse.com>
    xen-pciback: redo VF placement in the virtual topology

Cheng Jian <cj.chengjian@huawei.com>
    sched/fair: Optimize select_idle_cpu

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    ACPI: EC: Look for ECDT EC after calling acpi_load_tables()

Erik Schmauss <erik.schmauss@intel.com>
    ACPI: probe ECDT before loading AML tables regardless of module-level code flag

Marc Zyngier <maz@kernel.org>
    KVM: arm64: Fix debug register indexing

Sean Christopherson <seanjc@google.com>
    KVM: SVM: Truncate GPR value for DR and CR accesses in !64-bit mode

Anand Jain <anand.jain@oracle.com>
    btrfs: fix unmountable seed device after fstrim

Song Liu <songliubraving@fb.com>
    perf/core: Fix corner case in perf_rotate_context()

Ian Rogers <irogers@google.com>
    perf/cgroups: Don't rotate events for cgroups unnecessarily

Michael Chan <michael.chan@broadcom.com>
    bnxt_en: Remove the setting of dev_port.

Björn Töpel <bjorn.topel@gmail.com>
    selftests/bpf: Avoid running unprivileged tests with alignment requirements

Björn Töpel <bjorn.topel@gmail.com>
    selftests/bpf: add "any alignment" annotation for some tests

David S. Miller <davem@davemloft.net>
    bpf: Apply F_NEEDS_EFFICIENT_UNALIGNED_ACCESS to more ACCEPT test cases.

David S. Miller <davem@davemloft.net>
    bpf: Make more use of 'any' alignment in test_verifier.c

David S. Miller <davem@davemloft.net>
    bpf: Adjust F_NEEDS_EFFICIENT_UNALIGNED_ACCESS handling in test_verifier.c

David S. Miller <davem@davemloft.net>
    bpf: Add BPF_F_ANY_ALIGNMENT.

Joe Stringer <joe@wand.net.nz>
    selftests/bpf: Generalize dummy program types

Daniel Borkmann <daniel@iogearbox.net>
    bpf: test make sure to run unpriv test cases in test_verifier

Daniel Borkmann <daniel@iogearbox.net>
    bpf: fix test suite to enable all unpriv program types

Mina Almasry <almasrymina@google.com>
    mm, hugetlb: fix simple resv_huge_pages underflow on UFFDIO_COPY

Josef Bacik <josef@toxicpanda.com>
    btrfs: fixup error handling in fixup_inode_link_counts

Josef Bacik <josef@toxicpanda.com>
    btrfs: return errors from btrfs_del_csums in cleanup_ref_head

Josef Bacik <josef@toxicpanda.com>
    btrfs: fix error handling in btrfs_del_csums

Josef Bacik <josef@toxicpanda.com>
    btrfs: mark ordered extent and inode with error if we fail to finish

Thomas Gleixner <tglx@linutronix.de>
    x86/apic: Mark _all_ legacy interrupts when IO/APIC is missing

Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
    nfc: fix NULL ptr dereference in llcp_sock_getname() after failed connect

Junxiao Bi <junxiao.bi@oracle.com>
    ocfs2: fix data corruption by fallocate

Mark Rutland <mark.rutland@arm.com>
    pid: take a reference when initializing `cad_pid`

Phil Elwell <phil@raspberrypi.com>
    usb: dwc2: Fix build in periphal-only mode

Ye Bin <yebin10@huawei.com>
    ext4: fix bug on in ext4_es_cache_extent as ext4_split_extent_at failed

Marek Vasut <marex@denx.de>
    ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators

Carlos M <carlos.marr.pz@gmail.com>
    ALSA: hda: Fix for mute key LED for HP Pavilion 15-CK0xx

Takashi Iwai <tiwai@suse.de>
    ALSA: timer: Fix master timer notification

Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
    HID: multitouch: require Finger field to mark Win8 reports as MT

Pavel Skripkin <paskripkin@gmail.com>
    net: caif: fix memory leak in cfusbl_device_notify

Pavel Skripkin <paskripkin@gmail.com>
    net: caif: fix memory leak in caif_device_notify

Pavel Skripkin <paskripkin@gmail.com>
    net: caif: add proper error handling

Pavel Skripkin <paskripkin@gmail.com>
    net: caif: added cfserl_release function

Lin Ma <linma@zju.edu.cn>
    Bluetooth: use correct lock to prevent UAF of hdev object

Lin Ma <linma@zju.edu.cn>
    Bluetooth: fix the erroneous flush_work() order

Hoang Le <hoang.h.le@dektech.com.au>
    tipc: fix unique bearer names sanity check

Hoang Le <hoang.h.le@dektech.com.au>
    tipc: add extack messages for bearer/media failure

Magnus Karlsson <magnus.karlsson@intel.com>
    ixgbevf: add correct exception tracing for XDP

Wei Yongjun <weiyongjun1@huawei.com>
    ieee802154: fix error return code in ieee802154_llsec_getparams()

Zhen Lei <thunder.leizhen@huawei.com>
    ieee802154: fix error return code in ieee802154_add_iface()

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nfnetlink_cthelper: hit EBUSY on updates if size mismatches

Arnd Bergmann <arnd@arndb.de>
    HID: i2c-hid: fix format string mismatch

Zhen Lei <thunder.leizhen@huawei.com>
    HID: pidff: fix error return code in hid_pidff_init()

Julian Anastasov <ja@ssi.bg>
    ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service

Max Gurtovoy <mgurtovoy@nvidia.com>
    vfio/platform: fix module_put call in error flow

Wei Yongjun <weiyongjun1@huawei.com>
    samples: vfio-mdev: fix error handing in mdpy_fb_probe()

Randy Dunlap <rdunlap@infradead.org>
    vfio/pci: zap_vma_ptes() needs MMU

Zhen Lei <thunder.leizhen@huawei.com>
    vfio/pci: Fix error return code in vfio_ecap_init()

Rasmus Villemoes <linux@rasmusvillemoes.dk>
    efi: cper: fix snprintf() use in cper_dimm_err_location()

Heiner Kallweit <hkallweit1@gmail.com>
    efi: Allow EFI_MEMORY_XP and EFI_MEMORY_RO both to be cleared

Anant Thazhemadam <anant.thazhemadam@gmail.com>
    nl80211: validate key indexes for cfg80211_registered_device

Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
    ALSA: usb: update old-style static const declaration

Grant Grundler <grundler@chromium.org>
    net: usb: cdc_ncm: don't spew notifications


-------------

Diffstat:

 Makefile                                          |   4 +-
 arch/arm/boot/dts/imx6q-dhcom-som.dtsi            |  12 ++
 arch/arm64/kvm/sys_regs.c                         |  42 ++--
 arch/x86/include/asm/apic.h                       |   1 +
 arch/x86/kernel/apic/apic.c                       |   1 +
 arch/x86/kernel/apic/vector.c                     |  20 ++
 arch/x86/kvm/svm.c                                |   8 +-
 drivers/acpi/bus.c                                |  42 ++--
 drivers/firmware/efi/cper.c                       |   4 +-
 drivers/firmware/efi/memattr.c                    |   5 -
 drivers/hid/hid-multitouch.c                      |  10 +-
 drivers/hid/i2c-hid/i2c-hid-core.c                |   4 +-
 drivers/hid/usbhid/hid-pidff.c                    |   1 +
 drivers/net/ethernet/broadcom/bnxt/bnxt.c         |   1 -
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c |   3 +
 drivers/net/usb/cdc_ncm.c                         |  12 +-
 drivers/usb/dwc2/core_intr.c                      |   4 +
 drivers/vfio/pci/Kconfig                          |   1 +
 drivers/vfio/pci/vfio_pci_config.c                |   2 +-
 drivers/vfio/platform/vfio_platform_common.c      |   2 +-
 drivers/xen/xen-pciback/vpci.c                    |  14 +-
 fs/btrfs/extent-tree.c                            |  12 +-
 fs/btrfs/file-item.c                              |  10 +-
 fs/btrfs/inode.c                                  |  12 ++
 fs/btrfs/tree-log.c                               |  13 +-
 fs/ext4/extents.c                                 |  43 +++--
 fs/ocfs2/file.c                                   |  55 +++++-
 include/linux/perf_event.h                        |   5 +
 include/linux/usb/usbnet.h                        |   2 +
 include/net/caif/caif_dev.h                       |   2 +-
 include/net/caif/cfcnfg.h                         |   2 +-
 include/net/caif/cfserl.h                         |   1 +
 include/uapi/linux/bpf.h                          |  14 ++
 init/main.c                                       |   2 +-
 kernel/bpf/syscall.c                              |   7 +-
 kernel/bpf/verifier.c                             |   3 +
 kernel/events/core.c                              |  62 +++---
 kernel/sched/fair.c                               |   7 +-
 mm/hugetlb.c                                      |  14 +-
 net/bluetooth/hci_core.c                          |   7 +-
 net/bluetooth/hci_sock.c                          |   4 +-
 net/caif/caif_dev.c                               |  13 +-
 net/caif/caif_usb.c                               |  14 +-
 net/caif/cfcnfg.c                                 |  16 +-
 net/caif/cfserl.c                                 |   5 +
 net/ieee802154/nl-mac.c                           |   4 +-
 net/ieee802154/nl-phy.c                           |   4 +-
 net/netfilter/ipvs/ip_vs_ctl.c                    |   2 +-
 net/netfilter/nfnetlink_cthelper.c                |   8 +-
 net/nfc/llcp_sock.c                               |   2 +
 net/tipc/bearer.c                                 |  94 ++++++---
 net/wireless/core.h                               |   2 +
 net/wireless/nl80211.c                            |   7 +-
 net/wireless/util.c                               |  39 +++-
 samples/vfio-mdev/mdpy-fb.c                       |  13 +-
 sound/core/timer.c                                |   3 +-
 sound/pci/hda/patch_realtek.c                     |   1 +
 sound/usb/mixer_quirks.c                          |   2 +-
 tools/include/uapi/linux/bpf.h                    |  14 ++
 tools/lib/bpf/bpf.c                               |   8 +-
 tools/lib/bpf/bpf.h                               |   2 +-
 tools/testing/selftests/bpf/test_align.c          |   4 +-
 tools/testing/selftests/bpf/test_verifier.c       | 224 ++++++++++++++++------
 63 files changed, 676 insertions(+), 275 deletions(-)

[PATCH 4.19 01/58] net: usb: cdc_ncm: dont spew notifications

[Greg Kroah-Hartman]

From: Grant Grundler <grundler@chromium.org>

[ Upstream commit de658a195ee23ca6aaffe197d1d2ea040beea0a2 ]

RTL8156 sends notifications about every 32ms.
Only display/log notifications when something changes.

This issue has been reported by others:
	https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472
	https://lkml.org/lkml/2020/8/27/1083

...
[785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00
[785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN
[785962.929954] usb 1-1: Manufacturer: Realtek
[785962.929956] usb 1-1: SerialNumber: 000000001
[785962.991755] usbcore: registered new interface driver cdc_ether
[785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15
[785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384
[785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384
[785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15
[785963.019211] usbcore: registered new interface driver cdc_ncm
[785963.023856] usbcore: registered new interface driver cdc_wdm
[785963.025461] usbcore: registered new interface driver cdc_mbim
[785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0
[785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
...

This is about 2KB per second and will overwrite all contents of a 1MB
dmesg buffer in under 10 minutes rendering them useless for debugging
many kernel problems.

This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering
the majority of those logs useless too.

When the link is up (expected state), spew amount is >2x higher:
...
[786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
[786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
[786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
...

Chrome OS cannot support RTL8156 until this is fixed.

Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20210120011208.3768105-1-grundler@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/cdc_ncm.c  | 12 +++++++++++-
 include/linux/usb/usbnet.h |  2 ++
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index faca70c3647d..82ec00a7370d 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -1590,6 +1590,15 @@ cdc_ncm_speed_change(struct usbnet *dev,
 	uint32_t rx_speed = le32_to_cpu(data->DLBitRRate);
 	uint32_t tx_speed = le32_to_cpu(data->ULBitRate);
 
+	/* if the speed hasn't changed, don't report it.
+	 * RTL8156 shipped before 2021 sends notification about every 32ms.
+	 */
+	if (dev->rx_speed == rx_speed && dev->tx_speed == tx_speed)
+		return;
+
+	dev->rx_speed = rx_speed;
+	dev->tx_speed = tx_speed;
+
 	/*
 	 * Currently the USB-NET API does not support reporting the actual
 	 * device speed. Do print it instead.
@@ -1633,7 +1642,8 @@ static void cdc_ncm_status(struct usbnet *dev, struct urb *urb)
 		 * USB_CDC_NOTIFY_NETWORK_CONNECTION notification shall be
 		 * sent by device after USB_CDC_NOTIFY_SPEED_CHANGE.
 		 */
-		usbnet_link_change(dev, !!event->wValue, 0);
+		if (netif_carrier_ok(dev->net) != !!event->wValue)
+			usbnet_link_change(dev, !!event->wValue, 0);
 		break;
 
 	case USB_CDC_NOTIFY_SPEED_CHANGE:
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index e2ec3582e549..452ca06ed253 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -83,6 +83,8 @@ struct usbnet {
 #		define EVENT_LINK_CHANGE	11
 #		define EVENT_SET_RX_MODE	12
 #		define EVENT_NO_IP_ALIGN	13
+	u32			rx_speed;	/* in bps - NOT Mbps */
+	u32			tx_speed;	/* in bps - NOT Mbps */
 };
 
 static inline struct usb_driver *driver_of(struct usb_interface *intf)
-- 
2.30.2

[PATCH 4.19 02/58] ALSA: usb: update old-style static const declaration

[Greg Kroah-Hartman]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit ff40e0d41af19e36b43693fcb9241b4a6795bb44 ]

GCC reports the following warning with W=1

sound/usb/mixer_quirks.c: In function ‘snd_microii_controls_create’:
sound/usb/mixer_quirks.c:1694:2: warning: ‘static’ is not at beginning
of declaration [-Wold-style-declaration]
 1694 |  const static usb_mixer_elem_resume_func_t resume_funcs[] = {
      |  ^~~~~

Move static to the beginning of declaration

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200111214736.3002-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/mixer_quirks.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 169679419b39..a74e07eff60c 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -1708,7 +1708,7 @@ static struct snd_kcontrol_new snd_microii_mixer_spdif[] = {
 static int snd_microii_controls_create(struct usb_mixer_interface *mixer)
 {
 	int err, i;
-	const static usb_mixer_elem_resume_func_t resume_funcs[] = {
+	static const usb_mixer_elem_resume_func_t resume_funcs[] = {
 		snd_microii_spdif_default_update,
 		NULL,
 		snd_microii_spdif_switch_update
-- 
2.30.2

[PATCH 4.19 03/58] nl80211: validate key indexes for cfg80211_registered_device

[Greg Kroah-Hartman]

From: Anant Thazhemadam <anant.thazhemadam@gmail.com>

commit 2d9463083ce92636a1bdd3e30d1236e3e95d859e upstream

syzbot discovered a bug in which an OOB access was being made because
an unsuitable key_idx value was wrongly considered to be acceptable
while deleting a key in nl80211_del_key().

Since we don't know the cipher at the time of deletion, if
cfg80211_validate_key_settings() were to be called directly in
nl80211_del_key(), even valid keys would be wrongly determined invalid,
and deletion wouldn't occur correctly.
For this reason, a new function - cfg80211_valid_key_idx(), has been
created, to determine if the key_idx value provided is valid or not.
cfg80211_valid_key_idx() is directly called in 2 places -
nl80211_del_key(), and cfg80211_validate_key_settings().

Reported-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com
Tested-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Link: https://lore.kernel.org/r/20201204215825.129879-1-anant.thazhemadam@gmail.com
Cc: stable@vger.kernel.org
[also disallow IGTK key IDs if no IGTK cipher is supported]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/core.h    |  2 ++
 net/wireless/nl80211.c |  7 ++++---
 net/wireless/util.c    | 39 ++++++++++++++++++++++++++++++++++++++-
 3 files changed, 44 insertions(+), 4 deletions(-)

diff --git a/net/wireless/core.h b/net/wireless/core.h
index f5d58652108d..5f177dad2fa8 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -404,6 +404,8 @@ void cfg80211_sme_abandon_assoc(struct wireless_dev *wdev);
 
 /* internal helpers */
 bool cfg80211_supported_cipher_suite(struct wiphy *wiphy, u32 cipher);
+bool cfg80211_valid_key_idx(struct cfg80211_registered_device *rdev,
+			    int key_idx, bool pairwise);
 int cfg80211_validate_key_settings(struct cfg80211_registered_device *rdev,
 				   struct key_params *params, int key_idx,
 				   bool pairwise, const u8 *mac_addr);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 5f0605275fa3..04c4fd376e1d 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3624,9 +3624,6 @@ static int nl80211_del_key(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		return err;
 
-	if (key.idx < 0)
-		return -EINVAL;
-
 	if (info->attrs[NL80211_ATTR_MAC])
 		mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
@@ -3642,6 +3639,10 @@ static int nl80211_del_key(struct sk_buff *skb, struct genl_info *info)
 	    key.type != NL80211_KEYTYPE_GROUP)
 		return -EINVAL;
 
+	if (!cfg80211_valid_key_idx(rdev, key.idx,
+				    key.type == NL80211_KEYTYPE_PAIRWISE))
+		return -EINVAL;
+
 	if (!rdev->ops->del_key)
 		return -EOPNOTSUPP;
 
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 6f9cff2ee795..c4536468dfbe 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -214,11 +214,48 @@ bool cfg80211_supported_cipher_suite(struct wiphy *wiphy, u32 cipher)
 	return false;
 }
 
+static bool
+cfg80211_igtk_cipher_supported(struct cfg80211_registered_device *rdev)
+{
+	struct wiphy *wiphy = &rdev->wiphy;
+	int i;
+
+	for (i = 0; i < wiphy->n_cipher_suites; i++) {
+		switch (wiphy->cipher_suites[i]) {
+		case WLAN_CIPHER_SUITE_AES_CMAC:
+		case WLAN_CIPHER_SUITE_BIP_CMAC_256:
+		case WLAN_CIPHER_SUITE_BIP_GMAC_128:
+		case WLAN_CIPHER_SUITE_BIP_GMAC_256:
+			return true;
+		}
+	}
+
+	return false;
+}
+
+bool cfg80211_valid_key_idx(struct cfg80211_registered_device *rdev,
+			    int key_idx, bool pairwise)
+{
+	int max_key_idx;
+
+	if (pairwise)
+		max_key_idx = 3;
+	else if (cfg80211_igtk_cipher_supported(rdev))
+		max_key_idx = 5;
+	else
+		max_key_idx = 3;
+
+	if (key_idx < 0 || key_idx > max_key_idx)
+		return false;
+
+	return true;
+}
+
 int cfg80211_validate_key_settings(struct cfg80211_registered_device *rdev,
 				   struct key_params *params, int key_idx,
 				   bool pairwise, const u8 *mac_addr)
 {
-	if (key_idx < 0 || key_idx > 5)
+	if (!cfg80211_valid_key_idx(rdev, key_idx, pairwise))
 		return -EINVAL;
 
 	if (!pairwise && mac_addr && !(rdev->wiphy.flags & WIPHY_FLAG_IBSS_RSN))
-- 
2.30.2

[PATCH 4.19 04/58] efi: Allow EFI_MEMORY_XP and EFI_MEMORY_RO both to be cleared

[Greg Kroah-Hartman]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 45add3cc99feaaf57d4b6f01d52d532c16a1caee ]

UEFI spec 2.9, p.108, table 4-1 lists the scenario that both attributes
are cleared with the description "No memory access protection is
possible for Entry". So we can have valid entries where both attributes
are cleared, so remove the check.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: 10f0d2f577053 ("efi: Implement generic support for the Memory Attributes table")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/memattr.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/firmware/efi/memattr.c b/drivers/firmware/efi/memattr.c
index aac972b056d9..e0889922cc6d 100644
--- a/drivers/firmware/efi/memattr.c
+++ b/drivers/firmware/efi/memattr.c
@@ -69,11 +69,6 @@ static bool entry_is_valid(const efi_memory_desc_t *in, efi_memory_desc_t *out)
 		return false;
 	}
 
-	if (!(in->attribute & (EFI_MEMORY_RO | EFI_MEMORY_XP))) {
-		pr_warn("Entry attributes invalid: RO and XP bits both cleared\n");
-		return false;
-	}
-
 	if (PAGE_SIZE > EFI_PAGE_SIZE &&
 	    (!PAGE_ALIGNED(in->phys_addr) ||
 	     !PAGE_ALIGNED(in->num_pages << EFI_PAGE_SHIFT))) {
-- 
2.30.2

[PATCH 4.19 05/58] efi: cper: fix snprintf() use in cper_dimm_err_location()

[Greg Kroah-Hartman]

From: Rasmus Villemoes <linux@rasmusvillemoes.dk>

[ Upstream commit 942859d969de7f6f7f2659a79237a758b42782da ]

snprintf() should be given the full buffer size, not one less. And it
guarantees nul-termination, so doing it manually afterwards is
pointless.

It's even potentially harmful (though probably not in practice because
CPER_REC_LEN is 256), due to the "return how much would have been
written had the buffer been big enough" semantics. I.e., if the bank
and/or device strings are long enough that the "DIMM location ..."
output gets truncated, writing to msg[n] is a buffer overflow.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Fixes: 3760cd20402d4 ("CPER: Adjust code flow of some functions")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/cper.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
index 116989cf3d45..97da083afd32 100644
--- a/drivers/firmware/efi/cper.c
+++ b/drivers/firmware/efi/cper.c
@@ -275,8 +275,7 @@ static int cper_dimm_err_location(struct cper_mem_err_compact *mem, char *msg)
 	if (!msg || !(mem->validation_bits & CPER_MEM_VALID_MODULE_HANDLE))
 		return 0;
 
-	n = 0;
-	len = CPER_REC_LEN - 1;
+	len = CPER_REC_LEN;
 	dmi_memdev_name(mem->mem_dev_handle, &bank, &device);
 	if (bank && device)
 		n = snprintf(msg, len, "DIMM location: %s %s ", bank, device);
@@ -285,7 +284,6 @@ static int cper_dimm_err_location(struct cper_mem_err_compact *mem, char *msg)
 			     "DIMM location: not present. DMI handle: 0x%.4x ",
 			     mem->mem_dev_handle);
 
-	msg[n] = '\0';
 	return n;
 }
 
-- 
2.30.2

[PATCH 4.19 06/58] vfio/pci: Fix error return code in vfio_ecap_init()

[Greg Kroah-Hartman]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit d1ce2c79156d3baf0830990ab06d296477b93c26 ]

The error code returned from vfio_ext_cap_len() is stored in 'len', not
in 'ret'.

Fixes: 89e1f7d4c66d ("vfio: Add PCI device driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <20210515020458.6771-1-thunder.leizhen@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/pci/vfio_pci_config.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c
index a1a26465d224..86e917f1cc21 100644
--- a/drivers/vfio/pci/vfio_pci_config.c
+++ b/drivers/vfio/pci/vfio_pci_config.c
@@ -1579,7 +1579,7 @@ static int vfio_ecap_init(struct vfio_pci_device *vdev)
 			if (len == 0xFF) {
 				len = vfio_ext_cap_len(vdev, ecap, epos);
 				if (len < 0)
-					return ret;
+					return len;
 			}
 		}
 
-- 
2.30.2

[PATCH 4.19 07/58] vfio/pci: zap_vma_ptes() needs MMU

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 2a55ca37350171d9b43d561528f23d4130097255 ]

zap_vma_ptes() is only available when CONFIG_MMU is set/enabled.
Without CONFIG_MMU, vfio_pci.o has build errors, so make
VFIO_PCI depend on MMU.

riscv64-linux-ld: drivers/vfio/pci/vfio_pci.o: in function `vfio_pci_mmap_open':
vfio_pci.c:(.text+0x1ec): undefined reference to `zap_vma_ptes'
riscv64-linux-ld: drivers/vfio/pci/vfio_pci.o: in function `.L0 ':
vfio_pci.c:(.text+0x165c): undefined reference to `zap_vma_ptes'

Fixes: 11c4cd07ba11 ("vfio-pci: Fault mmaps to enable vma tracking")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210515190856.2130-1-rdunlap@infradead.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/pci/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/vfio/pci/Kconfig b/drivers/vfio/pci/Kconfig
index 42dc1d3d71cf..fcbfd0aacebc 100644
--- a/drivers/vfio/pci/Kconfig
+++ b/drivers/vfio/pci/Kconfig
@@ -1,6 +1,7 @@
 config VFIO_PCI
 	tristate "VFIO support for PCI devices"
 	depends on VFIO && PCI && EVENTFD
+	depends on MMU
 	select VFIO_VIRQFD
 	select IRQ_BYPASS_MANAGER
 	help
-- 
2.30.2

[PATCH 4.19 08/58] samples: vfio-mdev: fix error handing in mdpy_fb_probe()

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 752774ce7793a1f8baa55aae31f3b4caac49cbe4 ]

Fix to return a negative error code from the framebuffer_alloc() error
handling case instead of 0, also release regions in some error handing
cases.

Fixes: cacade1946a4 ("sample: vfio mdev display - guest driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Message-Id: <20210520133641.1421378-1-weiyongjun1@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 samples/vfio-mdev/mdpy-fb.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/samples/vfio-mdev/mdpy-fb.c b/samples/vfio-mdev/mdpy-fb.c
index 2719bb259653..a760e130bd0d 100644
--- a/samples/vfio-mdev/mdpy-fb.c
+++ b/samples/vfio-mdev/mdpy-fb.c
@@ -117,22 +117,27 @@ static int mdpy_fb_probe(struct pci_dev *pdev,
 	if (format != DRM_FORMAT_XRGB8888) {
 		pci_err(pdev, "format mismatch (0x%x != 0x%x)\n",
 			format, DRM_FORMAT_XRGB8888);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_release_regions;
 	}
 	if (width < 100	 || width > 10000) {
 		pci_err(pdev, "width (%d) out of range\n", width);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_release_regions;
 	}
 	if (height < 100 || height > 10000) {
 		pci_err(pdev, "height (%d) out of range\n", height);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_release_regions;
 	}
 	pci_info(pdev, "mdpy found: %dx%d framebuffer\n",
 		 width, height);
 
 	info = framebuffer_alloc(sizeof(struct mdpy_fb_par), &pdev->dev);
-	if (!info)
+	if (!info) {
+		ret = -ENOMEM;
 		goto err_release_regions;
+	}
 	pci_set_drvdata(pdev, info);
 	par = info->par;
 
-- 
2.30.2

[PATCH 4.19 09/58] vfio/platform: fix module_put call in error flow

[Greg Kroah-Hartman]

From: Max Gurtovoy <mgurtovoy@nvidia.com>

[ Upstream commit dc51ff91cf2d1e9a2d941da483602f71d4a51472 ]

The ->parent_module is the one that use in try_module_get. It should
also be the one the we use in module_put during vfio_platform_open().

Fixes: 32a2d71c4e80 ("vfio: platform: introduce vfio-platform-base module")
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <20210518192133.59195-1-mgurtovoy@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/platform/vfio_platform_common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
index 460760d0becf..c29fc6844f84 100644
--- a/drivers/vfio/platform/vfio_platform_common.c
+++ b/drivers/vfio/platform/vfio_platform_common.c
@@ -295,7 +295,7 @@ err_irq:
 	vfio_platform_regions_cleanup(vdev);
 err_reg:
 	mutex_unlock(&driver_lock);
-	module_put(THIS_MODULE);
+	module_put(vdev->parent_module);
 	return ret;
 }
 
-- 
2.30.2

[PATCH 4.19 10/58] ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service

[Greg Kroah-Hartman]

From: Julian Anastasov <ja@ssi.bg>

[ Upstream commit 56e4ee82e850026d71223262c07df7d6af3bd872 ]

syzbot reported memory leak [1] when adding service with
HASHED flag. We should ignore this flag both from sockopt
and netlink provided data, otherwise the service is not
hashed and not visible while releasing resources.

[1]
BUG: memory leak
unreferenced object 0xffff888115227800 (size 512):
  comm "syz-executor263", pid 8658, jiffies 4294951882 (age 12.560s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff83977188>] kmalloc include/linux/slab.h:556 [inline]
    [<ffffffff83977188>] kzalloc include/linux/slab.h:686 [inline]
    [<ffffffff83977188>] ip_vs_add_service+0x598/0x7c0 net/netfilter/ipvs/ip_vs_ctl.c:1343
    [<ffffffff8397d770>] do_ip_vs_set_ctl+0x810/0xa40 net/netfilter/ipvs/ip_vs_ctl.c:2570
    [<ffffffff838449a8>] nf_setsockopt+0x68/0xa0 net/netfilter/nf_sockopt.c:101
    [<ffffffff839ae4e9>] ip_setsockopt+0x259/0x1ff0 net/ipv4/ip_sockglue.c:1435
    [<ffffffff839fa03c>] raw_setsockopt+0x18c/0x1b0 net/ipv4/raw.c:857
    [<ffffffff83691f20>] __sys_setsockopt+0x1b0/0x360 net/socket.c:2117
    [<ffffffff836920f2>] __do_sys_setsockopt net/socket.c:2128 [inline]
    [<ffffffff836920f2>] __se_sys_setsockopt net/socket.c:2125 [inline]
    [<ffffffff836920f2>] __x64_sys_setsockopt+0x22/0x30 net/socket.c:2125
    [<ffffffff84350efa>] do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
    [<ffffffff84400068>] entry_SYSCALL_64_after_hwframe+0x44/0xae

Reported-and-tested-by: syzbot+e562383183e4b1766930@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipvs/ip_vs_ctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 3ad1de081e3c..6208fa09fe71 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -1269,7 +1269,7 @@ ip_vs_add_service(struct netns_ipvs *ipvs, struct ip_vs_service_user_kern *u,
 	ip_vs_addr_copy(svc->af, &svc->addr, &u->addr);
 	svc->port = u->port;
 	svc->fwmark = u->fwmark;
-	svc->flags = u->flags;
+	svc->flags = u->flags & ~IP_VS_SVC_F_HASHED;
 	svc->timeout = u->timeout * HZ;
 	svc->netmask = u->netmask;
 	svc->ipvs = ipvs;
-- 
2.30.2

[PATCH 4.19 11/58] HID: pidff: fix error return code in hid_pidff_init()

[Greg Kroah-Hartman]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit 3dd653c077efda8152f4dd395359617d577a54cd ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 224ee88fe395 ("Input: add force feedback driver for PID devices")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/usbhid/hid-pidff.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hid/usbhid/hid-pidff.c b/drivers/hid/usbhid/hid-pidff.c
index 08174d341f4a..bc75f1efa0f4 100644
--- a/drivers/hid/usbhid/hid-pidff.c
+++ b/drivers/hid/usbhid/hid-pidff.c
@@ -1304,6 +1304,7 @@ int hid_pidff_init(struct hid_device *hid)
 
 	if (pidff->pool[PID_DEVICE_MANAGED_POOL].value &&
 	    pidff->pool[PID_DEVICE_MANAGED_POOL].value[0] == 0) {
+		error = -EPERM;
 		hid_notice(hid,
 			   "device does not support device managed pool\n");
 		goto fail;
-- 
2.30.2

[PATCH 4.19 12/58] HID: i2c-hid: fix format string mismatch

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit dc5f9f55502e13ba05731d5046a14620aa2ff456 ]

clang doesn't like printing a 32-bit integer using %hX format string:

drivers/hid/i2c-hid/i2c-hid-core.c:994:18: error: format specifies type 'unsigned short' but the argument has type '__u32' (aka 'unsigned int') [-Werror,-Wformat]
                 client->name, hid->vendor, hid->product);
                               ^~~~~~~~~~~
drivers/hid/i2c-hid/i2c-hid-core.c:994:31: error: format specifies type 'unsigned short' but the argument has type '__u32' (aka 'unsigned int') [-Werror,-Wformat]
                 client->name, hid->vendor, hid->product);
                                            ^~~~~~~~~~~~

Use an explicit cast to truncate it to the low 16 bits instead.

Fixes: 9ee3e06610fd ("HID: i2c-hid: override HID descriptors for certain devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/i2c-hid/i2c-hid-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 1f8d403d3db4..19f4b807a5d1 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -1160,8 +1160,8 @@ static int i2c_hid_probe(struct i2c_client *client,
 	hid->vendor = le16_to_cpu(ihid->hdesc.wVendorID);
 	hid->product = le16_to_cpu(ihid->hdesc.wProductID);
 
-	snprintf(hid->name, sizeof(hid->name), "%s %04hX:%04hX",
-		 client->name, hid->vendor, hid->product);
+	snprintf(hid->name, sizeof(hid->name), "%s %04X:%04X",
+		 client->name, (u16)hid->vendor, (u16)hid->product);
 	strlcpy(hid->phys, dev_name(&client->dev), sizeof(hid->phys));
 
 	ihid->quirks = i2c_hid_lookup_quirk(hid->vendor, hid->product);
-- 
2.30.2

[PATCH 4.19 13/58] netfilter: nfnetlink_cthelper: hit EBUSY on updates if size mismatches

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 8971ee8b087750a23f3cd4dc55bff2d0303fd267 ]

The private helper data size cannot be updated. However, updates that
contain NFCTH_PRIV_DATA_LEN might bogusly hit EBUSY even if the size is
the same.

Fixes: 12f7a505331e ("netfilter: add user-space connection tracking helper infrastructure")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nfnetlink_cthelper.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/nfnetlink_cthelper.c b/net/netfilter/nfnetlink_cthelper.c
index ddcb1b607474..c8b0f1122c44 100644
--- a/net/netfilter/nfnetlink_cthelper.c
+++ b/net/netfilter/nfnetlink_cthelper.c
@@ -381,10 +381,14 @@ static int
 nfnl_cthelper_update(const struct nlattr * const tb[],
 		     struct nf_conntrack_helper *helper)
 {
+	u32 size;
 	int ret;
 
-	if (tb[NFCTH_PRIV_DATA_LEN])
-		return -EBUSY;
+	if (tb[NFCTH_PRIV_DATA_LEN]) {
+		size = ntohl(nla_get_be32(tb[NFCTH_PRIV_DATA_LEN]));
+		if (size != helper->data_len)
+			return -EBUSY;
+	}
 
 	if (tb[NFCTH_POLICY]) {
 		ret = nfnl_cthelper_update_policy(helper, tb[NFCTH_POLICY]);
-- 
2.30.2

[PATCH 4.19 14/58] ieee802154: fix error return code in ieee802154_add_iface()

[Greg Kroah-Hartman]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit 79c6b8ed30e54b401c873dbad2511f2a1c525fd5 ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: be51da0f3e34 ("ieee802154: Stop using NLA_PUT*().")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210508062517.2574-1-thunder.leizhen@huawei.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ieee802154/nl-phy.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/ieee802154/nl-phy.c b/net/ieee802154/nl-phy.c
index b231e40f006a..ca1dd9ff07ab 100644
--- a/net/ieee802154/nl-phy.c
+++ b/net/ieee802154/nl-phy.c
@@ -249,8 +249,10 @@ int ieee802154_add_iface(struct sk_buff *skb, struct genl_info *info)
 	}
 
 	if (nla_put_string(msg, IEEE802154_ATTR_PHY_NAME, wpan_phy_name(phy)) ||
-	    nla_put_string(msg, IEEE802154_ATTR_DEV_NAME, dev->name))
+	    nla_put_string(msg, IEEE802154_ATTR_DEV_NAME, dev->name)) {
+		rc = -EMSGSIZE;
 		goto nla_put_failure;
+	}
 	dev_put(dev);
 
 	wpan_phy_put(phy);
-- 
2.30.2

[PATCH 4.19 15/58] ieee802154: fix error return code in ieee802154_llsec_getparams()

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 373e864cf52403b0974c2f23ca8faf9104234555 ]

Fix to return negative error code -ENOBUFS from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 3e9c156e2c21 ("ieee802154: add netlink interfaces for llsec")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210519141614.3040055-1-weiyongjun1@huawei.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ieee802154/nl-mac.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/ieee802154/nl-mac.c b/net/ieee802154/nl-mac.c
index c0930b9fe848..7531cb1665d2 100644
--- a/net/ieee802154/nl-mac.c
+++ b/net/ieee802154/nl-mac.c
@@ -688,8 +688,10 @@ int ieee802154_llsec_getparams(struct sk_buff *skb, struct genl_info *info)
 	    nla_put_u8(msg, IEEE802154_ATTR_LLSEC_SECLEVEL, params.out_level) ||
 	    nla_put_u32(msg, IEEE802154_ATTR_LLSEC_FRAME_COUNTER,
 			be32_to_cpu(params.frame_counter)) ||
-	    ieee802154_llsec_fill_key_id(msg, &params.out_key))
+	    ieee802154_llsec_fill_key_id(msg, &params.out_key)) {
+		rc = -ENOBUFS;
 		goto out_free;
+	}
 
 	dev_put(dev);
 
-- 
2.30.2

[PATCH 4.19 16/58] ixgbevf: add correct exception tracing for XDP

[Greg Kroah-Hartman]

From: Magnus Karlsson <magnus.karlsson@intel.com>

[ Upstream commit faae81420d162551b6ef2d804aafc00f4cd68e0e ]

Add missing exception tracing to XDP when a number of different
errors can occur. The support was only partial. Several errors
where not logged which would confuse the user quite a lot not
knowing where and why the packets disappeared.

Fixes: 21092e9ce8b1 ("ixgbevf: Add support for XDP_TX action")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Vishakha Jambekar <vishakha.jambekar@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index a10756f0b0d8..7f94b445595c 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -1071,11 +1071,14 @@ static struct sk_buff *ixgbevf_run_xdp(struct ixgbevf_adapter *adapter,
 	case XDP_TX:
 		xdp_ring = adapter->xdp_ring[rx_ring->queue_index];
 		result = ixgbevf_xmit_xdp_ring(xdp_ring, xdp);
+		if (result == IXGBEVF_XDP_CONSUMED)
+			goto out_failure;
 		break;
 	default:
 		bpf_warn_invalid_xdp_action(act);
 		/* fallthrough */
 	case XDP_ABORTED:
+out_failure:
 		trace_xdp_exception(rx_ring->netdev, xdp_prog, act);
 		/* fallthrough -- handle aborts by dropping packet */
 	case XDP_DROP:
-- 
2.30.2

[PATCH 4.19 17/58] tipc: add extack messages for bearer/media failure

[Greg Kroah-Hartman]

From: Hoang Le <hoang.h.le@dektech.com.au>

[ Upstream commit b83e214b2e04204f1fc674574362061492c37245 ]

Add extack error messages for -EINVAL errors when enabling bearer,
getting/setting properties for a media/bearer

Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/bearer.c | 50 +++++++++++++++++++++++++++++++++++++----------
 1 file changed, 40 insertions(+), 10 deletions(-)

diff --git a/net/tipc/bearer.c b/net/tipc/bearer.c
index 2649a0a0d45e..8ab17f0da026 100644
--- a/net/tipc/bearer.c
+++ b/net/tipc/bearer.c
@@ -231,7 +231,8 @@ void tipc_bearer_remove_dest(struct net *net, u32 bearer_id, u32 dest)
  */
 static int tipc_enable_bearer(struct net *net, const char *name,
 			      u32 disc_domain, u32 prio,
-			      struct nlattr *attr[])
+			      struct nlattr *attr[],
+			      struct netlink_ext_ack *extack)
 {
 	struct tipc_net *tn = tipc_net(net);
 	struct tipc_bearer_names b_names;
@@ -245,17 +246,20 @@ static int tipc_enable_bearer(struct net *net, const char *name,
 
 	if (!bearer_name_validate(name, &b_names)) {
 		errstr = "illegal name";
+		NL_SET_ERR_MSG(extack, "Illegal name");
 		goto rejected;
 	}
 
 	if (prio > TIPC_MAX_LINK_PRI && prio != TIPC_MEDIA_LINK_PRI) {
 		errstr = "illegal priority";
+		NL_SET_ERR_MSG(extack, "Illegal priority");
 		goto rejected;
 	}
 
 	m = tipc_media_find(b_names.media_name);
 	if (!m) {
 		errstr = "media not registered";
+		NL_SET_ERR_MSG(extack, "Media not registered");
 		goto rejected;
 	}
 
@@ -269,6 +273,7 @@ static int tipc_enable_bearer(struct net *net, const char *name,
 			break;
 		if (!strcmp(name, b->name)) {
 			errstr = "already enabled";
+			NL_SET_ERR_MSG(extack, "Already enabled");
 			goto rejected;
 		}
 		bearer_id++;
@@ -280,6 +285,7 @@ static int tipc_enable_bearer(struct net *net, const char *name,
 			name, prio);
 		if (prio == TIPC_MIN_LINK_PRI) {
 			errstr = "cannot adjust to lower";
+			NL_SET_ERR_MSG(extack, "Cannot adjust to lower");
 			goto rejected;
 		}
 		pr_warn("Bearer <%s>: trying with adjusted priority\n", name);
@@ -290,6 +296,7 @@ static int tipc_enable_bearer(struct net *net, const char *name,
 
 	if (bearer_id >= MAX_BEARERS) {
 		errstr = "max 3 bearers permitted";
+		NL_SET_ERR_MSG(extack, "Max 3 bearers permitted");
 		goto rejected;
 	}
 
@@ -303,6 +310,7 @@ static int tipc_enable_bearer(struct net *net, const char *name,
 	if (res) {
 		kfree(b);
 		errstr = "failed to enable media";
+		NL_SET_ERR_MSG(extack, "Failed to enable media");
 		goto rejected;
 	}
 
@@ -318,6 +326,7 @@ static int tipc_enable_bearer(struct net *net, const char *name,
 	if (res) {
 		bearer_disable(net, b);
 		errstr = "failed to create discoverer";
+		NL_SET_ERR_MSG(extack, "Failed to create discoverer");
 		goto rejected;
 	}
 
@@ -795,6 +804,7 @@ int tipc_nl_bearer_get(struct sk_buff *skb, struct genl_info *info)
 	bearer = tipc_bearer_find(net, name);
 	if (!bearer) {
 		err = -EINVAL;
+		NL_SET_ERR_MSG(info->extack, "Bearer not found");
 		goto err_out;
 	}
 
@@ -834,8 +844,10 @@ int __tipc_nl_bearer_disable(struct sk_buff *skb, struct genl_info *info)
 	name = nla_data(attrs[TIPC_NLA_BEARER_NAME]);
 
 	bearer = tipc_bearer_find(net, name);
-	if (!bearer)
+	if (!bearer) {
+		NL_SET_ERR_MSG(info->extack, "Bearer not found");
 		return -EINVAL;
+	}
 
 	bearer_disable(net, bearer);
 
@@ -893,7 +905,8 @@ int __tipc_nl_bearer_enable(struct sk_buff *skb, struct genl_info *info)
 			prio = nla_get_u32(props[TIPC_NLA_PROP_PRIO]);
 	}
 
-	return tipc_enable_bearer(net, bearer, domain, prio, attrs);
+	return tipc_enable_bearer(net, bearer, domain, prio, attrs,
+				  info->extack);
 }
 
 int tipc_nl_bearer_enable(struct sk_buff *skb, struct genl_info *info)
@@ -932,6 +945,7 @@ int tipc_nl_bearer_add(struct sk_buff *skb, struct genl_info *info)
 	b = tipc_bearer_find(net, name);
 	if (!b) {
 		rtnl_unlock();
+		NL_SET_ERR_MSG(info->extack, "Bearer not found");
 		return -EINVAL;
 	}
 
@@ -972,8 +986,10 @@ int __tipc_nl_bearer_set(struct sk_buff *skb, struct genl_info *info)
 	name = nla_data(attrs[TIPC_NLA_BEARER_NAME]);
 
 	b = tipc_bearer_find(net, name);
-	if (!b)
+	if (!b) {
+		NL_SET_ERR_MSG(info->extack, "Bearer not found");
 		return -EINVAL;
+	}
 
 	if (attrs[TIPC_NLA_BEARER_PROP]) {
 		struct nlattr *props[TIPC_NLA_PROP_MAX + 1];
@@ -992,12 +1008,18 @@ int __tipc_nl_bearer_set(struct sk_buff *skb, struct genl_info *info)
 		if (props[TIPC_NLA_PROP_WIN])
 			b->window = nla_get_u32(props[TIPC_NLA_PROP_WIN]);
 		if (props[TIPC_NLA_PROP_MTU]) {
-			if (b->media->type_id != TIPC_MEDIA_TYPE_UDP)
+			if (b->media->type_id != TIPC_MEDIA_TYPE_UDP) {
+				NL_SET_ERR_MSG(info->extack,
+					       "MTU property is unsupported");
 				return -EINVAL;
+			}
 #ifdef CONFIG_TIPC_MEDIA_UDP
 			if (tipc_udp_mtu_bad(nla_get_u32
-					     (props[TIPC_NLA_PROP_MTU])))
+					     (props[TIPC_NLA_PROP_MTU]))) {
+				NL_SET_ERR_MSG(info->extack,
+					       "MTU value is out-of-range");
 				return -EINVAL;
+			}
 			b->mtu = nla_get_u32(props[TIPC_NLA_PROP_MTU]);
 			tipc_node_apply_property(net, b, TIPC_NLA_PROP_MTU);
 #endif
@@ -1125,6 +1147,7 @@ int tipc_nl_media_get(struct sk_buff *skb, struct genl_info *info)
 	rtnl_lock();
 	media = tipc_media_find(name);
 	if (!media) {
+		NL_SET_ERR_MSG(info->extack, "Media not found");
 		err = -EINVAL;
 		goto err_out;
 	}
@@ -1161,9 +1184,10 @@ int __tipc_nl_media_set(struct sk_buff *skb, struct genl_info *info)
 	name = nla_data(attrs[TIPC_NLA_MEDIA_NAME]);
 
 	m = tipc_media_find(name);
-	if (!m)
+	if (!m) {
+		NL_SET_ERR_MSG(info->extack, "Media not found");
 		return -EINVAL;
-
+	}
 	if (attrs[TIPC_NLA_MEDIA_PROP]) {
 		struct nlattr *props[TIPC_NLA_PROP_MAX + 1];
 
@@ -1179,12 +1203,18 @@ int __tipc_nl_media_set(struct sk_buff *skb, struct genl_info *info)
 		if (props[TIPC_NLA_PROP_WIN])
 			m->window = nla_get_u32(props[TIPC_NLA_PROP_WIN]);
 		if (props[TIPC_NLA_PROP_MTU]) {
-			if (m->type_id != TIPC_MEDIA_TYPE_UDP)
+			if (m->type_id != TIPC_MEDIA_TYPE_UDP) {
+				NL_SET_ERR_MSG(info->extack,
+					       "MTU property is unsupported");
 				return -EINVAL;
+			}
 #ifdef CONFIG_TIPC_MEDIA_UDP
 			if (tipc_udp_mtu_bad(nla_get_u32
-					     (props[TIPC_NLA_PROP_MTU])))
+					     (props[TIPC_NLA_PROP_MTU]))) {
+				NL_SET_ERR_MSG(info->extack,
+					       "MTU value is out-of-range");
 				return -EINVAL;
+			}
 			m->mtu = nla_get_u32(props[TIPC_NLA_PROP_MTU]);
 #endif
 		}
-- 
2.30.2

[PATCH 4.19 18/58] tipc: fix unique bearer names sanity check

[Greg Kroah-Hartman]

From: Hoang Le <hoang.h.le@dektech.com.au>

[ Upstream commit f20a46c3044c3f75232b3d0e2d09af9b25efaf45 ]

When enabling a bearer by name, we don't sanity check its name with
higher slot in bearer list. This may have the effect that the name
of an already enabled bearer bypasses the check.

To fix the above issue, we just perform an extra checking with all
existing bearers.

Fixes: cb30a63384bc9 ("tipc: refactor function tipc_enable_bearer()")
Cc: stable@vger.kernel.org
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/bearer.c | 46 +++++++++++++++++++++++++++-------------------
 1 file changed, 27 insertions(+), 19 deletions(-)

diff --git a/net/tipc/bearer.c b/net/tipc/bearer.c
index 8ab17f0da026..e1006ed4d90a 100644
--- a/net/tipc/bearer.c
+++ b/net/tipc/bearer.c
@@ -243,6 +243,7 @@ static int tipc_enable_bearer(struct net *net, const char *name,
 	int bearer_id = 0;
 	int res = -EINVAL;
 	char *errstr = "";
+	u32 i;
 
 	if (!bearer_name_validate(name, &b_names)) {
 		errstr = "illegal name";
@@ -267,31 +268,38 @@ static int tipc_enable_bearer(struct net *net, const char *name,
 		prio = m->priority;
 
 	/* Check new bearer vs existing ones and find free bearer id if any */
-	while (bearer_id < MAX_BEARERS) {
-		b = rtnl_dereference(tn->bearer_list[bearer_id]);
-		if (!b)
-			break;
+	bearer_id = MAX_BEARERS;
+	i = MAX_BEARERS;
+	while (i-- != 0) {
+		b = rtnl_dereference(tn->bearer_list[i]);
+		if (!b) {
+			bearer_id = i;
+			continue;
+		}
 		if (!strcmp(name, b->name)) {
 			errstr = "already enabled";
 			NL_SET_ERR_MSG(extack, "Already enabled");
 			goto rejected;
 		}
-		bearer_id++;
-		if (b->priority != prio)
-			continue;
-		if (++with_this_prio <= 2)
-			continue;
-		pr_warn("Bearer <%s>: already 2 bearers with priority %u\n",
-			name, prio);
-		if (prio == TIPC_MIN_LINK_PRI) {
-			errstr = "cannot adjust to lower";
-			NL_SET_ERR_MSG(extack, "Cannot adjust to lower");
-			goto rejected;
+
+		if (b->priority == prio &&
+		    (++with_this_prio > 2)) {
+			pr_warn("Bearer <%s>: already 2 bearers with priority %u\n",
+				name, prio);
+
+			if (prio == TIPC_MIN_LINK_PRI) {
+				errstr = "cannot adjust to lower";
+				NL_SET_ERR_MSG(extack, "Cannot adjust to lower");
+				goto rejected;
+			}
+
+			pr_warn("Bearer <%s>: trying with adjusted priority\n",
+				name);
+			prio--;
+			bearer_id = MAX_BEARERS;
+			i = MAX_BEARERS;
+			with_this_prio = 1;
 		}
-		pr_warn("Bearer <%s>: trying with adjusted priority\n", name);
-		prio--;
-		bearer_id = 0;
-		with_this_prio = 1;
 	}
 
 	if (bearer_id >= MAX_BEARERS) {
-- 
2.30.2

[PATCH 4.19 19/58] Bluetooth: fix the erroneous flush_work() order

[Greg Kroah-Hartman]

From: Lin Ma <linma@zju.edu.cn>

commit 6a137caec23aeb9e036cdfd8a46dd8a366460e5d upstream.

In the cleanup routine for failed initialization of HCI device,
the flush_work(&hdev->rx_work) need to be finished before the
flush_work(&hdev->cmd_work). Otherwise, the hci_rx_work() can
possibly invoke new cmd_work and cause a bug, like double free,
in late processings.

This was assigned CVE-2021-3564.

This patch reorder the flush_work() to fix this bug.

Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-bluetooth@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Hao Xiong <mart1n@zju.edu.cn>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bluetooth/hci_core.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1498,8 +1498,13 @@ static int hci_dev_do_open(struct hci_de
 	} else {
 		/* Init failed, cleanup */
 		flush_work(&hdev->tx_work);
-		flush_work(&hdev->cmd_work);
+
+		/* Since hci_rx_work() is possible to awake new cmd_work
+		 * it should be flushed first to avoid unexpected call of
+		 * hci_cmd_work()
+		 */
 		flush_work(&hdev->rx_work);
+		flush_work(&hdev->cmd_work);
 
 		skb_queue_purge(&hdev->cmd_q);
 		skb_queue_purge(&hdev->rx_q);

[PATCH 4.19 20/58] Bluetooth: use correct lock to prevent UAF of hdev object

[Greg Kroah-Hartman]

From: Lin Ma <linma@zju.edu.cn>

commit e305509e678b3a4af2b3cfd410f409f7cdaabb52 upstream.

The hci_sock_dev_event() function will cleanup the hdev object for
sockets even if this object may still be in used within the
hci_sock_bound_ioctl() function, result in UAF vulnerability.

This patch replace the BH context lock to serialize these affairs
and prevent the race condition.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bluetooth/hci_sock.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -755,7 +755,7 @@ void hci_sock_dev_event(struct hci_dev *
 		/* Detach sockets from device */
 		read_lock(&hci_sk_list.lock);
 		sk_for_each(sk, &hci_sk_list.head) {
-			bh_lock_sock_nested(sk);
+			lock_sock(sk);
 			if (hci_pi(sk)->hdev == hdev) {
 				hci_pi(sk)->hdev = NULL;
 				sk->sk_err = EPIPE;
@@ -764,7 +764,7 @@ void hci_sock_dev_event(struct hci_dev *
 
 				hci_dev_put(hdev);
 			}
-			bh_unlock_sock(sk);
+			release_sock(sk);
 		}
 		read_unlock(&hci_sk_list.lock);
 	}

[PATCH 4.19 21/58] net: caif: added cfserl_release function

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

commit bce130e7f392ddde8cfcb09927808ebd5f9c8669 upstream.

Added cfserl_release() function.

Cc: stable@vger.kernel.org
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/caif/cfserl.h |    1 +
 net/caif/cfserl.c         |    5 +++++
 2 files changed, 6 insertions(+)

--- a/include/net/caif/cfserl.h
+++ b/include/net/caif/cfserl.h
@@ -9,4 +9,5 @@
 #include <net/caif/caif_layer.h>
 
 struct cflayer *cfserl_create(int instance, bool use_stx);
+void cfserl_release(struct cflayer *layer);
 #endif
--- a/net/caif/cfserl.c
+++ b/net/caif/cfserl.c
@@ -31,6 +31,11 @@ static int cfserl_transmit(struct cflaye
 static void cfserl_ctrlcmd(struct cflayer *layr, enum caif_ctrlcmd ctrl,
 			   int phyid);
 
+void cfserl_release(struct cflayer *layer)
+{
+	kfree(layer);
+}
+
 struct cflayer *cfserl_create(int instance, bool use_stx)
 {
 	struct cfserl *this = kzalloc(sizeof(struct cfserl), GFP_ATOMIC);

[PATCH 4.19 22/58] net: caif: add proper error handling

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

commit a2805dca5107d5603f4bbc027e81e20d93476e96 upstream.

caif_enroll_dev() can fail in some cases. Ingnoring
these cases can lead to memory leak due to not assigning
link_support pointer to anywhere.

Fixes: 7c18d2205ea7 ("caif: Restructure how link caif link layer enroll")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/caif/caif_dev.h |    2 +-
 include/net/caif/cfcnfg.h   |    2 +-
 net/caif/caif_dev.c         |    8 +++++---
 net/caif/cfcnfg.c           |   16 +++++++++++-----
 4 files changed, 18 insertions(+), 10 deletions(-)

--- a/include/net/caif/caif_dev.h
+++ b/include/net/caif/caif_dev.h
@@ -119,7 +119,7 @@ void caif_free_client(struct cflayer *ad
  * The link_support layer is used to add any Link Layer specific
  * framing.
  */
-void caif_enroll_dev(struct net_device *dev, struct caif_dev_common *caifdev,
+int caif_enroll_dev(struct net_device *dev, struct caif_dev_common *caifdev,
 			struct cflayer *link_support, int head_room,
 			struct cflayer **layer, int (**rcv_func)(
 				struct sk_buff *, struct net_device *,
--- a/include/net/caif/cfcnfg.h
+++ b/include/net/caif/cfcnfg.h
@@ -62,7 +62,7 @@ void cfcnfg_remove(struct cfcnfg *cfg);
  * @fcs:	Specify if checksum is used in CAIF Framing Layer.
  * @head_room:	Head space needed by link specific protocol.
  */
-void
+int
 cfcnfg_add_phy_layer(struct cfcnfg *cnfg,
 		     struct net_device *dev, struct cflayer *phy_layer,
 		     enum cfcnfg_phy_preference pref,
--- a/net/caif/caif_dev.c
+++ b/net/caif/caif_dev.c
@@ -303,7 +303,7 @@ static void dev_flowctrl(struct net_devi
 	caifd_put(caifd);
 }
 
-void caif_enroll_dev(struct net_device *dev, struct caif_dev_common *caifdev,
+int caif_enroll_dev(struct net_device *dev, struct caif_dev_common *caifdev,
 		     struct cflayer *link_support, int head_room,
 		     struct cflayer **layer,
 		     int (**rcv_func)(struct sk_buff *, struct net_device *,
@@ -314,11 +314,12 @@ void caif_enroll_dev(struct net_device *
 	enum cfcnfg_phy_preference pref;
 	struct cfcnfg *cfg = get_cfcnfg(dev_net(dev));
 	struct caif_device_entry_list *caifdevs;
+	int res;
 
 	caifdevs = caif_device_list(dev_net(dev));
 	caifd = caif_device_alloc(dev);
 	if (!caifd)
-		return;
+		return -ENOMEM;
 	*layer = &caifd->layer;
 	spin_lock_init(&caifd->flow_lock);
 
@@ -339,7 +340,7 @@ void caif_enroll_dev(struct net_device *
 	strlcpy(caifd->layer.name, dev->name,
 		sizeof(caifd->layer.name));
 	caifd->layer.transmit = transmit;
-	cfcnfg_add_phy_layer(cfg,
+	res = cfcnfg_add_phy_layer(cfg,
 				dev,
 				&caifd->layer,
 				pref,
@@ -349,6 +350,7 @@ void caif_enroll_dev(struct net_device *
 	mutex_unlock(&caifdevs->lock);
 	if (rcv_func)
 		*rcv_func = receive;
+	return res;
 }
 EXPORT_SYMBOL(caif_enroll_dev);
 
--- a/net/caif/cfcnfg.c
+++ b/net/caif/cfcnfg.c
@@ -450,7 +450,7 @@ unlock:
 	rcu_read_unlock();
 }
 
-void
+int
 cfcnfg_add_phy_layer(struct cfcnfg *cnfg,
 		     struct net_device *dev, struct cflayer *phy_layer,
 		     enum cfcnfg_phy_preference pref,
@@ -459,7 +459,7 @@ cfcnfg_add_phy_layer(struct cfcnfg *cnfg
 {
 	struct cflayer *frml;
 	struct cfcnfg_phyinfo *phyinfo = NULL;
-	int i;
+	int i, res = 0;
 	u8 phyid;
 
 	mutex_lock(&cnfg->lock);
@@ -473,12 +473,15 @@ cfcnfg_add_phy_layer(struct cfcnfg *cnfg
 			goto got_phyid;
 	}
 	pr_warn("Too many CAIF Link Layers (max 6)\n");
+	res = -EEXIST;
 	goto out;
 
 got_phyid:
 	phyinfo = kzalloc(sizeof(struct cfcnfg_phyinfo), GFP_ATOMIC);
-	if (!phyinfo)
+	if (!phyinfo) {
+		res = -ENOMEM;
 		goto out_err;
+	}
 
 	phy_layer->id = phyid;
 	phyinfo->pref = pref;
@@ -492,8 +495,10 @@ got_phyid:
 
 	frml = cffrml_create(phyid, fcs);
 
-	if (!frml)
+	if (!frml) {
+		res = -ENOMEM;
 		goto out_err;
+	}
 	phyinfo->frm_layer = frml;
 	layer_set_up(frml, cnfg->mux);
 
@@ -511,11 +516,12 @@ got_phyid:
 	list_add_rcu(&phyinfo->node, &cnfg->phys);
 out:
 	mutex_unlock(&cnfg->lock);
-	return;
+	return res;
 
 out_err:
 	kfree(phyinfo);
 	mutex_unlock(&cnfg->lock);
+	return res;
 }
 EXPORT_SYMBOL(cfcnfg_add_phy_layer);
 

[PATCH 4.19 23/58] net: caif: fix memory leak in caif_device_notify

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

commit b53558a950a89824938e9811eddfc8efcd94e1bb upstream.

In case of caif_enroll_dev() fail, allocated
link_support won't be assigned to the corresponding
structure. So simply free allocated pointer in case
of error

Fixes: 7c18d2205ea7 ("caif: Restructure how link caif link layer enroll")
Cc: stable@vger.kernel.org
Reported-and-tested-by: syzbot+7ec324747ce876a29db6@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/caif/caif_dev.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/net/caif/caif_dev.c
+++ b/net/caif/caif_dev.c
@@ -365,6 +365,7 @@ static int caif_device_notify(struct not
 	struct cflayer *layer, *link_support;
 	int head_room = 0;
 	struct caif_device_entry_list *caifdevs;
+	int res;
 
 	cfg = get_cfcnfg(dev_net(dev));
 	caifdevs = caif_device_list(dev_net(dev));
@@ -390,8 +391,10 @@ static int caif_device_notify(struct not
 				break;
 			}
 		}
-		caif_enroll_dev(dev, caifdev, link_support, head_room,
+		res = caif_enroll_dev(dev, caifdev, link_support, head_room,
 				&layer, NULL);
+		if (res)
+			cfserl_release(link_support);
 		caifdev->flowctrl = dev_flowctrl;
 		break;
 

[PATCH 4.19 24/58] net: caif: fix memory leak in cfusbl_device_notify

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

commit 7f5d86669fa4d485523ddb1d212e0a2d90bd62bb upstream.

In case of caif_enroll_dev() fail, allocated
link_support won't be assigned to the corresponding
structure. So simply free allocated pointer in case
of error.

Fixes: 7ad65bf68d70 ("caif: Add support for CAIF over CDC NCM USB interface")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/caif/caif_usb.c |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

--- a/net/caif/caif_usb.c
+++ b/net/caif/caif_usb.c
@@ -116,6 +116,11 @@ static struct cflayer *cfusbl_create(int
 	return (struct cflayer *) this;
 }
 
+static void cfusbl_release(struct cflayer *layer)
+{
+	kfree(layer);
+}
+
 static struct packet_type caif_usb_type __read_mostly = {
 	.type = cpu_to_be16(ETH_P_802_EX1),
 };
@@ -128,6 +133,7 @@ static int cfusbl_device_notify(struct n
 	struct cflayer *layer, *link_support;
 	struct usbnet *usbnet;
 	struct usb_device *usbdev;
+	int res;
 
 	/* Check whether we have a NCM device, and find its VID/PID. */
 	if (!(dev->dev.parent && dev->dev.parent->driver &&
@@ -170,8 +176,11 @@ static int cfusbl_device_notify(struct n
 	if (dev->num_tx_queues > 1)
 		pr_warn("USB device uses more than one tx queue\n");
 
-	caif_enroll_dev(dev, &common, link_support, CFUSB_MAX_HEADLEN,
+	res = caif_enroll_dev(dev, &common, link_support, CFUSB_MAX_HEADLEN,
 			&layer, &caif_usb_type.func);
+	if (res)
+		goto err;
+
 	if (!pack_added)
 		dev_add_pack(&caif_usb_type);
 	pack_added = true;
@@ -179,6 +188,9 @@ static int cfusbl_device_notify(struct n
 	strlcpy(layer->name, dev->name, sizeof(layer->name));
 
 	return 0;
+err:
+	cfusbl_release(link_support);
+	return res;
 }
 
 static struct notifier_block caif_device_notifier = {

[PATCH 4.19 25/58] HID: multitouch: require Finger field to mark Win8 reports as MT

[Greg Kroah-Hartman]

From: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>

commit a2353e3b26012ff43bcdf81d37a3eaddd7ecdbf3 upstream.

This effectively changes collection_is_mt from
  contact ID in report->field
to
  (device is Win8 => collection is finger) && contact ID in report->field

Some devices erroneously report Pen for fingers, and Win8 stylus-on-touchscreen
devices report contact ID, but mark the accompanying touchscreen device's
collection correctly

Cc: stable@vger.kernel.org
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/hid-multitouch.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -588,9 +588,13 @@ static struct mt_report_data *mt_allocat
 		if (!(HID_MAIN_ITEM_VARIABLE & field->flags))
 			continue;
 
-		for (n = 0; n < field->report_count; n++) {
-			if (field->usage[n].hid == HID_DG_CONTACTID)
-				rdata->is_mt_collection = true;
+		if (field->logical == HID_DG_FINGER || td->hdev->group != HID_GROUP_MULTITOUCH_WIN_8) {
+			for (n = 0; n < field->report_count; n++) {
+				if (field->usage[n].hid == HID_DG_CONTACTID) {
+					rdata->is_mt_collection = true;
+					break;
+				}
+			}
 		}
 	}
 

[PATCH 4.19 26/58] ALSA: timer: Fix master timer notification

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 9c1fe96bded935369f8340c2ac2e9e189f697d5d upstream.

snd_timer_notify1() calls the notification to each slave for a master
event, but it passes a wrong event number.  It should be +10 offset,
corresponding to SNDRV_TIMER_EVENT_MXXX, but it's incorrectly with
+100 offset.  Casually this was spotted by UBSAN check via syzkaller.

Reported-by: syzbot+d102fa5b35335a7e544e@syzkaller.appspotmail.com
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/000000000000e5560e05c3bd1d63@google.com
Link: https://lore.kernel.org/r/20210602113823.23777-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/core/timer.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/sound/core/timer.c
+++ b/sound/core/timer.c
@@ -500,9 +500,10 @@ static void snd_timer_notify1(struct snd
 		return;
 	if (timer->hw.flags & SNDRV_TIMER_HW_SLAVE)
 		return;
+	event += 10; /* convert to SNDRV_TIMER_EVENT_MXXX */
 	list_for_each_entry(ts, &ti->slave_active_head, active_list)
 		if (ts->ccallback)
-			ts->ccallback(ts, event + 100, &tstamp, resolution);
+			ts->ccallback(ts, event, &tstamp, resolution);
 }
 
 /* start/continue a master timer */

[PATCH 4.19 27/58] ALSA: hda: Fix for mute key LED for HP Pavilion 15-CK0xx

[Greg Kroah-Hartman]

From: Carlos M <carlos.marr.pz@gmail.com>

commit 901be145a46eb79879367d853194346a549e623d upstream.

For the HP Pavilion 15-CK0xx, with audio subsystem ID 0x103c:0x841c,
adding a line in patch_realtek.c to apply the ALC269_FIXUP_HP_MUTE_LED_MIC3
fix activates the mute key LED.

Signed-off-by: Carlos M <carlos.marr.pz@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210531202026.35427-1-carlos.marr.pz@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7095,6 +7095,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x103c, 0x82bf, "HP G3 mini", ALC221_FIXUP_HP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x82c0, "HP G3 mini premium", ALC221_FIXUP_HP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x83b9, "HP Spectre x360", ALC269_FIXUP_HP_MUTE_LED_MIC3),
+	SND_PCI_QUIRK(0x103c, 0x841c, "HP Pavilion 15-CK0xx", ALC269_FIXUP_HP_MUTE_LED_MIC3),
 	SND_PCI_QUIRK(0x103c, 0x8497, "HP Envy x360", ALC269_FIXUP_HP_MUTE_LED_MIC3),
 	SND_PCI_QUIRK(0x103c, 0x84e7, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3),
 	SND_PCI_QUIRK(0x103c, 0x8736, "HP", ALC285_FIXUP_HP_GPIO_LED),

[PATCH 4.19 28/58] ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators

[Greg Kroah-Hartman]

From: Marek Vasut <marex@denx.de>

commit 8967b27a6c1c19251989c7ab33c058d16e4a5f53 upstream.

Per schematic, both PU and SOC regulator are supplied from LTC3676 SW1
via VDDSOC_IN rail, add the PU input. Both VDD1P1, VDD2P5 are supplied
from LTC3676 SW2 via VDDHIGH_IN rail, add both inputs.

While no instability or problems are currently observed, the regulators
should be fully described in DT and that description should fully match
the hardware, else this might lead to unforseen issues later. Fix this.

Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2")
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Ludwig Zenz <lzenz@dh-electronics.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/imx6q-dhcom-som.dtsi |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
@@ -407,6 +407,18 @@
 	vin-supply = <&sw1_reg>;
 };
 
+&reg_pu {
+	vin-supply = <&sw1_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&sw2_reg>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;

Re: [PATCH 4.19 28/58] ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators

[Sudip Mukherjee]

Hi Greg,

On Tue, Jun 08, 2021 at 08:27:09PM +0200, Greg Kroah-Hartman wrote:
> From: Marek Vasut <marex@denx.de>
> 
> commit 8967b27a6c1c19251989c7ab33c058d16e4a5f53 upstream.

This is causing build failure with error:

Error: arch/arm/boot/dts/imx6q-dhcom-som.dtsi:414.1-12 Label or path reg_vdd1p1 not found
Error: arch/arm/boot/dts/imx6q-dhcom-som.dtsi:418.1-12 Label or path reg_vdd2p5 not found
FATAL ERROR: Syntax error parsing input tree


--
Regards
Sudip

Re: [PATCH 4.19 28/58] ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators

[Greg Kroah-Hartman]

On Tue, Jun 08, 2021 at 08:09:00PM +0100, Sudip Mukherjee wrote:
> Hi Greg,
> 
> On Tue, Jun 08, 2021 at 08:27:09PM +0200, Greg Kroah-Hartman wrote:
> > From: Marek Vasut <marex@denx.de>
> > 
> > commit 8967b27a6c1c19251989c7ab33c058d16e4a5f53 upstream.
> 
> This is causing build failure with error:
> 
> Error: arch/arm/boot/dts/imx6q-dhcom-som.dtsi:414.1-12 Label or path reg_vdd1p1 not found
> Error: arch/arm/boot/dts/imx6q-dhcom-som.dtsi:418.1-12 Label or path reg_vdd2p5 not found
> FATAL ERROR: Syntax error parsing input tree

Thanks for the report will go drop this now...

greg k-h

Re: [PATCH 4.19 28/58] ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators

[Naresh Kamboju]

On Wed, 9 Jun 2021 at 00:08, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> From: Marek Vasut <marex@denx.de>
>
> commit 8967b27a6c1c19251989c7ab33c058d16e4a5f53 upstream.
>
> Per schematic, both PU and SOC regulator are supplied from LTC3676 SW1
> via VDDSOC_IN rail, add the PU input. Both VDD1P1, VDD2P5 are supplied
> from LTC3676 SW2 via VDDHIGH_IN rail, add both inputs.
>
> While no instability or problems are currently observed, the regulators
> should be fully described in DT and that description should fully match
> the hardware, else this might lead to unforseen issues later. Fix this.
>
> Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2")
> Reviewed-by: Fabio Estevam <festevam@gmail.com>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Ludwig Zenz <lzenz@dh-electronics.com>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: stable@vger.kernel.org
> Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  arch/arm/boot/dts/imx6q-dhcom-som.dtsi |   12 ++++++++++++
>  1 file changed, 12 insertions(+)
>
> --- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
> +++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
> @@ -407,6 +407,18 @@
>         vin-supply = <&sw1_reg>;
>  };
>
> +&reg_pu {
> +       vin-supply = <&sw1_reg>;
> +};
> +
> +&reg_vdd1p1 {
> +       vin-supply = <&sw2_reg>;
> +};
> +
> +&reg_vdd2p5 {
> +       vin-supply = <&sw2_reg>;
> +};
> +
>  &uart1 {
>         pinctrl-names = "default";
>         pinctrl-0 = <&pinctrl_uart1>;

arm dtb build failed on stable rc 4.19

make --silent --keep-going --jobs=8
O=/home/tuxbuild/.cache/tuxmake/builds/current ARCH=arm
CROSS_COMPILE=arm-linux-gnueabihf- 'CC=sccache
arm-linux-gnueabihf-gcc' 'HOSTCC=sccache gcc'
Error: /builds/linux/arch/arm/boot/dts/imx6q-dhcom-som.dtsi:414.1-12
Label or path reg_vdd1p1 not found
Error: /builds/linux/arch/arm/boot/dts/imx6q-dhcom-som.dtsi:418.1-12
Label or path reg_vdd2p5 not found
FATAL ERROR: Syntax error parsing input tree
make[2]: *** [scripts/Makefile.lib:294:
arch/arm/boot/dts/imx6q-dhcom-pdk2.dtb] Error 1

Reported-by:  Linux Kernel Functional Testing <lkft@linaro.org>

build url:
https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc/-/jobs/1328891505#L477

Config:
https://builds.tuxbuild.com/1tg0YjTz4ow5CkHv0bzTc05pVs5/config

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.19 28/58] ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators

[Greg Kroah-Hartman]

On Wed, Jun 09, 2021 at 12:43:46AM +0530, Naresh Kamboju wrote:
> On Wed, 9 Jun 2021 at 00:08, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > From: Marek Vasut <marex@denx.de>
> >
> > commit 8967b27a6c1c19251989c7ab33c058d16e4a5f53 upstream.
> >
> > Per schematic, both PU and SOC regulator are supplied from LTC3676 SW1
> > via VDDSOC_IN rail, add the PU input. Both VDD1P1, VDD2P5 are supplied
> > from LTC3676 SW2 via VDDHIGH_IN rail, add both inputs.
> >
> > While no instability or problems are currently observed, the regulators
> > should be fully described in DT and that description should fully match
> > the hardware, else this might lead to unforseen issues later. Fix this.
> >
> > Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2")
> > Reviewed-by: Fabio Estevam <festevam@gmail.com>
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
> > Cc: Fabio Estevam <festevam@gmail.com>
> > Cc: Ludwig Zenz <lzenz@dh-electronics.com>
> > Cc: NXP Linux Team <linux-imx@nxp.com>
> > Cc: Shawn Guo <shawnguo@kernel.org>
> > Cc: stable@vger.kernel.org
> > Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
> > Signed-off-by: Shawn Guo <shawnguo@kernel.org>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > ---
> >  arch/arm/boot/dts/imx6q-dhcom-som.dtsi |   12 ++++++++++++
> >  1 file changed, 12 insertions(+)
> >
> > --- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
> > +++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
> > @@ -407,6 +407,18 @@
> >         vin-supply = <&sw1_reg>;
> >  };
> >
> > +&reg_pu {
> > +       vin-supply = <&sw1_reg>;
> > +};
> > +
> > +&reg_vdd1p1 {
> > +       vin-supply = <&sw2_reg>;
> > +};
> > +
> > +&reg_vdd2p5 {
> > +       vin-supply = <&sw2_reg>;
> > +};
> > +
> >  &uart1 {
> >         pinctrl-names = "default";
> >         pinctrl-0 = <&pinctrl_uart1>;
> 
> arm dtb build failed on stable rc 4.19
> 
> make --silent --keep-going --jobs=8
> O=/home/tuxbuild/.cache/tuxmake/builds/current ARCH=arm
> CROSS_COMPILE=arm-linux-gnueabihf- 'CC=sccache
> arm-linux-gnueabihf-gcc' 'HOSTCC=sccache gcc'
> Error: /builds/linux/arch/arm/boot/dts/imx6q-dhcom-som.dtsi:414.1-12
> Label or path reg_vdd1p1 not found
> Error: /builds/linux/arch/arm/boot/dts/imx6q-dhcom-som.dtsi:418.1-12
> Label or path reg_vdd2p5 not found
> FATAL ERROR: Syntax error parsing input tree
> make[2]: *** [scripts/Makefile.lib:294:
> arch/arm/boot/dts/imx6q-dhcom-pdk2.dtb] Error 1
> 
> Reported-by:  Linux Kernel Functional Testing <lkft@linaro.org>
> 
> build url:
> https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc/-/jobs/1328891505#L477
> 
> Config:
> https://builds.tuxbuild.com/1tg0YjTz4ow5CkHv0bzTc05pVs5/config

Thanks, will go delete this and push out a -rc2.

greg k-h

[PATCH 4.19 29/58] ext4: fix bug on in ext4_es_cache_extent as ext4_split_extent_at failed

[Greg Kroah-Hartman]

From: Ye Bin <yebin10@huawei.com>

commit 082cd4ec240b8734a82a89ffb890216ac98fec68 upstream.

We got follow bug_on when run fsstress with injecting IO fault:
[130747.323114] kernel BUG at fs/ext4/extents_status.c:762!
[130747.323117] Internal error: Oops - BUG: 0 [#1] SMP
......
[130747.334329] Call trace:
[130747.334553]  ext4_es_cache_extent+0x150/0x168 [ext4]
[130747.334975]  ext4_cache_extents+0x64/0xe8 [ext4]
[130747.335368]  ext4_find_extent+0x300/0x330 [ext4]
[130747.335759]  ext4_ext_map_blocks+0x74/0x1178 [ext4]
[130747.336179]  ext4_map_blocks+0x2f4/0x5f0 [ext4]
[130747.336567]  ext4_mpage_readpages+0x4a8/0x7a8 [ext4]
[130747.336995]  ext4_readpage+0x54/0x100 [ext4]
[130747.337359]  generic_file_buffered_read+0x410/0xae8
[130747.337767]  generic_file_read_iter+0x114/0x190
[130747.338152]  ext4_file_read_iter+0x5c/0x140 [ext4]
[130747.338556]  __vfs_read+0x11c/0x188
[130747.338851]  vfs_read+0x94/0x150
[130747.339110]  ksys_read+0x74/0xf0

This patch's modification is according to Jan Kara's suggestion in:
https://patchwork.ozlabs.org/project/linux-ext4/patch/20210428085158.3728201-1-yebin10@huawei.com/
"I see. Now I understand your patch. Honestly, seeing how fragile is trying
to fix extent tree after split has failed in the middle, I would probably
go even further and make sure we fix the tree properly in case of ENOSPC
and EDQUOT (those are easily user triggerable).  Anything else indicates a
HW problem or fs corruption so I'd rather leave the extent tree as is and
don't try to fix it (which also means we will not create overlapping
extents)."

Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210506141042.3298679-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/extents.c |   43 +++++++++++++++++++++++--------------------
 1 file changed, 23 insertions(+), 20 deletions(-)

--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -3263,7 +3263,10 @@ static int ext4_split_extent_at(handle_t
 		ext4_ext_mark_unwritten(ex2);
 
 	err = ext4_ext_insert_extent(handle, inode, ppath, &newex, flags);
-	if (err == -ENOSPC && (EXT4_EXT_MAY_ZEROOUT & split_flag)) {
+	if (err != -ENOSPC && err != -EDQUOT)
+		goto out;
+
+	if (EXT4_EXT_MAY_ZEROOUT & split_flag) {
 		if (split_flag & (EXT4_EXT_DATA_VALID1|EXT4_EXT_DATA_VALID2)) {
 			if (split_flag & EXT4_EXT_DATA_VALID1) {
 				err = ext4_ext_zeroout(inode, ex2);
@@ -3289,30 +3292,30 @@ static int ext4_split_extent_at(handle_t
 					      ext4_ext_pblock(&orig_ex));
 		}
 
-		if (err)
-			goto fix_extent_len;
-		/* update the extent length and mark as initialized */
-		ex->ee_len = cpu_to_le16(ee_len);
-		ext4_ext_try_to_merge(handle, inode, path, ex);
-		err = ext4_ext_dirty(handle, inode, path + path->p_depth);
-		if (err)
-			goto fix_extent_len;
-
-		/* update extent status tree */
-		err = ext4_zeroout_es(inode, &zero_ex);
-
-		goto out;
-	} else if (err)
-		goto fix_extent_len;
-
-out:
-	ext4_ext_show_leaf(inode, path);
-	return err;
+		if (!err) {
+			/* update the extent length and mark as initialized */
+			ex->ee_len = cpu_to_le16(ee_len);
+			ext4_ext_try_to_merge(handle, inode, path, ex);
+			err = ext4_ext_dirty(handle, inode, path + path->p_depth);
+			if (!err)
+				/* update extent status tree */
+				err = ext4_zeroout_es(inode, &zero_ex);
+			/* If we failed at this point, we don't know in which
+			 * state the extent tree exactly is so don't try to fix
+			 * length of the original extent as it may do even more
+			 * damage.
+			 */
+			goto out;
+		}
+	}
 
 fix_extent_len:
 	ex->ee_len = orig_ex.ee_len;
 	ext4_ext_dirty(handle, inode, path + path->p_depth);
 	return err;
+out:
+	ext4_ext_show_leaf(inode, path);
+	return err;
 }
 
 /*

[PATCH 4.19 30/58] usb: dwc2: Fix build in periphal-only mode

[Greg Kroah-Hartman]

From: Phil Elwell <phil@raspberrypi.com>

In branches to which 24d209dba5a3 ("usb: dwc2: Fix hibernation between
host and device modes.") has been back-ported, the bus_suspended member
of struct dwc2_hsotg is only present in builds that support host-mode.
To avoid having to pull in several more non-Fix commits in order to
get it to compile, wrap the usage of the member in a macro conditional.

Fixes: 24d209dba5a3 ("usb: dwc2: Fix hibernation between host and device modes.")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/dwc2/core_intr.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/dwc2/core_intr.c
+++ b/drivers/usb/dwc2/core_intr.c
@@ -700,7 +700,11 @@ static inline void dwc_handle_gpwrdn_dis
 	dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
 
 	hsotg->hibernated = 0;
+
+#if IS_ENABLED(CONFIG_USB_DWC2_HOST) ||	\
+	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
 	hsotg->bus_suspended = 0;
+#endif
 
 	if (gpwrdn & GPWRDN_IDSTS) {
 		hsotg->op_state = OTG_STATE_B_PERIPHERAL;

[PATCH 4.19 31/58] pid: take a reference when initializing `cad_pid`

[Greg Kroah-Hartman]

From: Mark Rutland <mark.rutland@arm.com>

commit 0711f0d7050b9e07c44bc159bbc64ac0a1022c7f upstream.

During boot, kernel_init_freeable() initializes `cad_pid` to the init
task's struct pid.  Later on, we may change `cad_pid` via a sysctl, and
when this happens proc_do_cad_pid() will increment the refcount on the
new pid via get_pid(), and will decrement the refcount on the old pid
via put_pid().  As we never called get_pid() when we initialized
`cad_pid`, we decrement a reference we never incremented, can therefore
free the init task's struct pid early.  As there can be dangling
references to the struct pid, we can later encounter a use-after-free
(e.g.  when delivering signals).

This was spotted when fuzzing v5.13-rc3 with Syzkaller, but seems to
have been around since the conversion of `cad_pid` to struct pid in
commit 9ec52099e4b8 ("[PATCH] replace cad_pid by a struct pid") from the
pre-KASAN stone age of v2.6.19.

Fix this by getting a reference to the init task's struct pid when we
assign it to `cad_pid`.

Full KASAN splat below.

   ==================================================================
   BUG: KASAN: use-after-free in ns_of_pid include/linux/pid.h:153 [inline]
   BUG: KASAN: use-after-free in task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509
   Read of size 4 at addr ffff23794dda0004 by task syz-executor.0/273

   CPU: 1 PID: 273 Comm: syz-executor.0 Not tainted 5.12.0-00001-g9aef892b2d15 #1
   Hardware name: linux,dummy-virt (DT)
   Call trace:
    ns_of_pid include/linux/pid.h:153 [inline]
    task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509
    do_notify_parent+0x308/0xe60 kernel/signal.c:1950
    exit_notify kernel/exit.c:682 [inline]
    do_exit+0x2334/0x2bd0 kernel/exit.c:845
    do_group_exit+0x108/0x2c8 kernel/exit.c:922
    get_signal+0x4e4/0x2a88 kernel/signal.c:2781
    do_signal arch/arm64/kernel/signal.c:882 [inline]
    do_notify_resume+0x300/0x970 arch/arm64/kernel/signal.c:936
    work_pending+0xc/0x2dc

   Allocated by task 0:
    slab_post_alloc_hook+0x50/0x5c0 mm/slab.h:516
    slab_alloc_node mm/slub.c:2907 [inline]
    slab_alloc mm/slub.c:2915 [inline]
    kmem_cache_alloc+0x1f4/0x4c0 mm/slub.c:2920
    alloc_pid+0xdc/0xc00 kernel/pid.c:180
    copy_process+0x2794/0x5e18 kernel/fork.c:2129
    kernel_clone+0x194/0x13c8 kernel/fork.c:2500
    kernel_thread+0xd4/0x110 kernel/fork.c:2552
    rest_init+0x44/0x4a0 init/main.c:687
    arch_call_rest_init+0x1c/0x28
    start_kernel+0x520/0x554 init/main.c:1064
    0x0

   Freed by task 270:
    slab_free_hook mm/slub.c:1562 [inline]
    slab_free_freelist_hook+0x98/0x260 mm/slub.c:1600
    slab_free mm/slub.c:3161 [inline]
    kmem_cache_free+0x224/0x8e0 mm/slub.c:3177
    put_pid.part.4+0xe0/0x1a8 kernel/pid.c:114
    put_pid+0x30/0x48 kernel/pid.c:109
    proc_do_cad_pid+0x190/0x1b0 kernel/sysctl.c:1401
    proc_sys_call_handler+0x338/0x4b0 fs/proc/proc_sysctl.c:591
    proc_sys_write+0x34/0x48 fs/proc/proc_sysctl.c:617
    call_write_iter include/linux/fs.h:1977 [inline]
    new_sync_write+0x3ac/0x510 fs/read_write.c:518
    vfs_write fs/read_write.c:605 [inline]
    vfs_write+0x9c4/0x1018 fs/read_write.c:585
    ksys_write+0x124/0x240 fs/read_write.c:658
    __do_sys_write fs/read_write.c:670 [inline]
    __se_sys_write fs/read_write.c:667 [inline]
    __arm64_sys_write+0x78/0xb0 fs/read_write.c:667
    __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline]
    invoke_syscall arch/arm64/kernel/syscall.c:49 [inline]
    el0_svc_common.constprop.1+0x16c/0x388 arch/arm64/kernel/syscall.c:129
    do_el0_svc+0xf8/0x150 arch/arm64/kernel/syscall.c:168
    el0_svc+0x28/0x38 arch/arm64/kernel/entry-common.c:416
    el0_sync_handler+0x134/0x180 arch/arm64/kernel/entry-common.c:432
    el0_sync+0x154/0x180 arch/arm64/kernel/entry.S:701

   The buggy address belongs to the object at ffff23794dda0000
    which belongs to the cache pid of size 224
   The buggy address is located 4 bytes inside of
    224-byte region [ffff23794dda0000, ffff23794dda00e0)
   The buggy address belongs to the page:
   page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4dda0
   head:(____ptrval____) order:1 compound_mapcount:0
   flags: 0x3fffc0000010200(slab|head)
   raw: 03fffc0000010200 dead000000000100 dead000000000122 ffff23794d40d080
   raw: 0000000000000000 0000000000190019 00000001ffffffff 0000000000000000
   page dumped because: kasan: bad access detected

   Memory state around the buggy address:
    ffff23794dd9ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
    ffff23794dd9ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
   >ffff23794dda0000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                      ^
    ffff23794dda0080: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
    ffff23794dda0100: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
   ==================================================================

Link: https://lkml.kernel.org/r/20210524172230.38715-1-mark.rutland@arm.com
Fixes: 9ec52099e4b8678a ("[PATCH] replace cad_pid by a struct pid")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 init/main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/init/main.c
+++ b/init/main.c
@@ -1124,7 +1124,7 @@ static noinline void __init kernel_init_
 	 */
 	set_mems_allowed(node_states[N_MEMORY]);
 
-	cad_pid = task_pid(current);
+	cad_pid = get_pid(task_pid(current));
 
 	smp_prepare_cpus(setup_max_cpus);
 

[PATCH 4.19 32/58] ocfs2: fix data corruption by fallocate

[Greg Kroah-Hartman]

From: Junxiao Bi <junxiao.bi@oracle.com>

commit 6bba4471f0cc1296fe3c2089b9e52442d3074b2e upstream.

When fallocate punches holes out of inode size, if original isize is in
the middle of last cluster, then the part from isize to the end of the
cluster will be zeroed with buffer write, at that time isize is not yet
updated to match the new size, if writeback is kicked in, it will invoke
ocfs2_writepage()->block_write_full_page() where the pages out of inode
size will be dropped.  That will cause file corruption.  Fix this by
zero out eof blocks when extending the inode size.

Running the following command with qemu-image 4.2.1 can get a corrupted
coverted image file easily.

    qemu-img convert -p -t none -T none -f qcow2 $qcow_image \
             -O qcow2 -o compat=1.1 $qcow_image.conv

The usage of fallocate in qemu is like this, it first punches holes out
of inode size, then extend the inode size.

    fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2276196352, 65536) = 0
    fallocate(11, 0, 2276196352, 65536) = 0

v1: https://www.spinics.net/lists/linux-fsdevel/msg193999.html
v2: https://lore.kernel.org/linux-fsdevel/20210525093034.GB4112@quack2.suse.cz/T/

Link: https://lkml.kernel.org/r/20210528210648.9124-1-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ocfs2/file.c |   55 ++++++++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 50 insertions(+), 5 deletions(-)

--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1864,6 +1864,45 @@ out:
 }
 
 /*
+ * zero out partial blocks of one cluster.
+ *
+ * start: file offset where zero starts, will be made upper block aligned.
+ * len: it will be trimmed to the end of current cluster if "start + len"
+ *      is bigger than it.
+ */
+static int ocfs2_zeroout_partial_cluster(struct inode *inode,
+					u64 start, u64 len)
+{
+	int ret;
+	u64 start_block, end_block, nr_blocks;
+	u64 p_block, offset;
+	u32 cluster, p_cluster, nr_clusters;
+	struct super_block *sb = inode->i_sb;
+	u64 end = ocfs2_align_bytes_to_clusters(sb, start);
+
+	if (start + len < end)
+		end = start + len;
+
+	start_block = ocfs2_blocks_for_bytes(sb, start);
+	end_block = ocfs2_blocks_for_bytes(sb, end);
+	nr_blocks = end_block - start_block;
+	if (!nr_blocks)
+		return 0;
+
+	cluster = ocfs2_bytes_to_clusters(sb, start);
+	ret = ocfs2_get_clusters(inode, cluster, &p_cluster,
+				&nr_clusters, NULL);
+	if (ret)
+		return ret;
+	if (!p_cluster)
+		return 0;
+
+	offset = start_block - ocfs2_clusters_to_blocks(sb, cluster);
+	p_block = ocfs2_clusters_to_blocks(sb, p_cluster) + offset;
+	return sb_issue_zeroout(sb, p_block, nr_blocks, GFP_NOFS);
+}
+
+/*
  * Parts of this function taken from xfs_change_file_space()
  */
 static int __ocfs2_change_file_space(struct file *file, struct inode *inode,
@@ -1873,7 +1912,7 @@ static int __ocfs2_change_file_space(str
 {
 	int ret;
 	s64 llen;
-	loff_t size;
+	loff_t size, orig_isize;
 	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
 	struct buffer_head *di_bh = NULL;
 	handle_t *handle;
@@ -1904,6 +1943,7 @@ static int __ocfs2_change_file_space(str
 		goto out_inode_unlock;
 	}
 
+	orig_isize = i_size_read(inode);
 	switch (sr->l_whence) {
 	case 0: /*SEEK_SET*/
 		break;
@@ -1911,7 +1951,7 @@ static int __ocfs2_change_file_space(str
 		sr->l_start += f_pos;
 		break;
 	case 2: /*SEEK_END*/
-		sr->l_start += i_size_read(inode);
+		sr->l_start += orig_isize;
 		break;
 	default:
 		ret = -EINVAL;
@@ -1965,6 +2005,14 @@ static int __ocfs2_change_file_space(str
 	default:
 		ret = -EINVAL;
 	}
+
+	/* zeroout eof blocks in the cluster. */
+	if (!ret && change_size && orig_isize < size) {
+		ret = ocfs2_zeroout_partial_cluster(inode, orig_isize,
+					size - orig_isize);
+		if (!ret)
+			i_size_write(inode, size);
+	}
 	up_write(&OCFS2_I(inode)->ip_alloc_sem);
 	if (ret) {
 		mlog_errno(ret);
@@ -1981,9 +2029,6 @@ static int __ocfs2_change_file_space(str
 		goto out_inode_unlock;
 	}
 
-	if (change_size && i_size_read(inode) < size)
-		i_size_write(inode, size);
-
 	inode->i_ctime = inode->i_mtime = current_time(inode);
 	ret = ocfs2_mark_inode_dirty(handle, inode, di_bh);
 	if (ret < 0)

[PATCH 4.19 33/58] nfc: fix NULL ptr dereference in llcp_sock_getname() after failed connect

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

commit 4ac06a1e013cf5fdd963317ffd3b968560f33bba upstream.

It's possible to trigger NULL pointer dereference by local unprivileged
user, when calling getsockname() after failed bind() (e.g. the bind
fails because LLCP_SAP_MAX used as SAP):

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  CPU: 1 PID: 426 Comm: llcp_sock_getna Not tainted 5.13.0-rc2-next-20210521+ #9
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1 04/01/2014
  Call Trace:
   llcp_sock_getname+0xb1/0xe0
   __sys_getpeername+0x95/0xc0
   ? lockdep_hardirqs_on_prepare+0xd5/0x180
   ? syscall_enter_from_user_mode+0x1c/0x40
   __x64_sys_getpeername+0x11/0x20
   do_syscall_64+0x36/0x70
   entry_SYSCALL_64_after_hwframe+0x44/0xae

This can be reproduced with Syzkaller C repro (bind followed by
getpeername):
https://syzkaller.appspot.com/x/repro.c?x=14def446e00000

Cc: <stable@vger.kernel.org>
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Reported-by: syzbot+80fb126e7f7d8b1a5914@syzkaller.appspotmail.com
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210531072138.5219-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/nfc/llcp_sock.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/nfc/llcp_sock.c
+++ b/net/nfc/llcp_sock.c
@@ -122,6 +122,7 @@ static int llcp_sock_bind(struct socket
 	if (!llcp_sock->service_name) {
 		nfc_llcp_local_put(llcp_sock->local);
 		llcp_sock->local = NULL;
+		llcp_sock->dev = NULL;
 		ret = -ENOMEM;
 		goto put_dev;
 	}
@@ -131,6 +132,7 @@ static int llcp_sock_bind(struct socket
 		llcp_sock->local = NULL;
 		kfree(llcp_sock->service_name);
 		llcp_sock->service_name = NULL;
+		llcp_sock->dev = NULL;
 		ret = -EADDRINUSE;
 		goto put_dev;
 	}

[PATCH 4.19 34/58] x86/apic: Mark _all_ legacy interrupts when IO/APIC is missing

[Greg Kroah-Hartman]

From: Thomas Gleixner <tglx@linutronix.de>

commit 7d65f9e80646c595e8c853640a9d0768a33e204c upstream.

PIC interrupts do not support affinity setting and they can end up on
any online CPU. Therefore, it's required to mark the associated vectors
as system-wide reserved. Otherwise, the corresponding irq descriptors
are copied to the secondary CPUs but the vectors are not marked as
assigned or reserved. This works correctly for the IO/APIC case.

When the IO/APIC is disabled via config, kernel command line or lack of
enumeration then all legacy interrupts are routed through the PIC, but
nothing marks them as system-wide reserved vectors.

As a consequence, a subsequent allocation on a secondary CPU can result in
allocating one of these vectors, which triggers the BUG() in
apic_update_vector() because the interrupt descriptor slot is not empty.

Imran tried to work around that by marking those interrupts as allocated
when a CPU comes online. But that's wrong in case that the IO/APIC is
available and one of the legacy interrupts, e.g. IRQ0, has been switched to
PIC mode because then marking them as allocated will fail as they are
already marked as system vectors.

Stay consistent and update the legacy vectors after attempting IO/APIC
initialization and mark them as system vectors in case that no IO/APIC is
available.

Fixes: 69cde0004a4b ("x86/vector: Use matrix allocator for vector assignment")
Reported-by: Imran Khan <imran.f.khan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210519233928.2157496-1-imran.f.khan@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/include/asm/apic.h   |    1 +
 arch/x86/kernel/apic/apic.c   |    1 +
 arch/x86/kernel/apic/vector.c |   20 ++++++++++++++++++++
 3 files changed, 22 insertions(+)

--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -172,6 +172,7 @@ static inline int apic_is_clustered_box(
 extern int setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask);
 extern void lapic_assign_system_vectors(void);
 extern void lapic_assign_legacy_vector(unsigned int isairq, bool replace);
+extern void lapic_update_legacy_vectors(void);
 extern void lapic_online(void);
 extern void lapic_offline(void);
 
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -2507,6 +2507,7 @@ void __init apic_bsp_setup(bool upmode)
 	end_local_APIC_setup();
 	irq_remap_enable_fault_handling();
 	setup_IO_APIC();
+	lapic_update_legacy_vectors();
 }
 
 #ifdef CONFIG_UP_LATE_INIT
--- a/arch/x86/kernel/apic/vector.c
+++ b/arch/x86/kernel/apic/vector.c
@@ -682,6 +682,26 @@ void lapic_assign_legacy_vector(unsigned
 	irq_matrix_assign_system(vector_matrix, ISA_IRQ_VECTOR(irq), replace);
 }
 
+void __init lapic_update_legacy_vectors(void)
+{
+	unsigned int i;
+
+	if (IS_ENABLED(CONFIG_X86_IO_APIC) && nr_ioapics > 0)
+		return;
+
+	/*
+	 * If the IO/APIC is disabled via config, kernel command line or
+	 * lack of enumeration then all legacy interrupts are routed
+	 * through the PIC. Make sure that they are marked as legacy
+	 * vectors. PIC_CASCADE_IRQ has already been marked in
+	 * lapic_assign_system_vectors().
+	 */
+	for (i = 0; i < nr_legacy_irqs(); i++) {
+		if (i != PIC_CASCADE_IR)
+			lapic_assign_legacy_vector(i, true);
+	}
+}
+
 void __init lapic_assign_system_vectors(void)
 {
 	unsigned int i, vector = 0;

[PATCH 4.19 35/58] btrfs: mark ordered extent and inode with error if we fail to finish

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

commit d61bec08b904cf171835db98168f82bc338e92e4 upstream.

While doing error injection testing I saw that sometimes we'd get an
abort that wouldn't stop the current transaction commit from completing.
This abort was coming from finish ordered IO, but at this point in the
transaction commit we should have gotten an error and stopped.

It turns out the abort came from finish ordered io while trying to write
out the free space cache.  It occurred to me that any failure inside of
finish_ordered_io isn't actually raised to the person doing the writing,
so we could have any number of failures in this path and think the
ordered extent completed successfully and the inode was fine.

Fix this by marking the ordered extent with BTRFS_ORDERED_IOERR, and
marking the mapping of the inode with mapping_set_error, so any callers
that simply call fdatawait will also get the error.

With this we're seeing the IO error on the free space inode when we fail
to do the finish_ordered_io.

CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/inode.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -3162,6 +3162,18 @@ out:
 	if (ret || truncated) {
 		u64 start, end;
 
+		/*
+		 * If we failed to finish this ordered extent for any reason we
+		 * need to make sure BTRFS_ORDERED_IOERR is set on the ordered
+		 * extent, and mark the inode with the error if it wasn't
+		 * already set.  Any error during writeback would have already
+		 * set the mapping error, so we need to set it if we're the ones
+		 * marking this ordered extent as failed.
+		 */
+		if (ret && !test_and_set_bit(BTRFS_ORDERED_IOERR,
+					     &ordered_extent->flags))
+			mapping_set_error(ordered_extent->inode->i_mapping, -EIO);
+
 		if (truncated)
 			start = ordered_extent->file_offset + logical_len;
 		else

[PATCH 4.19 36/58] btrfs: fix error handling in btrfs_del_csums

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

commit b86652be7c83f70bf406bed18ecf55adb9bfb91b upstream.

Error injection stress would sometimes fail with checksums on disk that
did not have a corresponding extent.  This occurred because the pattern
in btrfs_del_csums was

	while (1) {
		ret = btrfs_search_slot();
		if (ret < 0)
			break;
	}
	ret = 0;
out:
	btrfs_free_path(path);
	return ret;

If we got an error from btrfs_search_slot we'd clear the error because
we were breaking instead of goto out.  Instead of using goto out, simply
handle the cases where we may leave a random value in ret, and get rid
of the

	ret = 0;
out:

pattern and simply allow break to have the proper error reporting.  With
this fix we properly abort the transaction and do not commit thinking we
successfully deleted the csum.

Reviewed-by: Qu Wenruo <wqu@suse.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/file-item.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/fs/btrfs/file-item.c
+++ b/fs/btrfs/file-item.c
@@ -586,7 +586,7 @@ int btrfs_del_csums(struct btrfs_trans_h
 	u64 end_byte = bytenr + len;
 	u64 csum_end;
 	struct extent_buffer *leaf;
-	int ret;
+	int ret = 0;
 	u16 csum_size = btrfs_super_csum_size(fs_info->super_copy);
 	int blocksize_bits = fs_info->sb->s_blocksize_bits;
 
@@ -605,6 +605,7 @@ int btrfs_del_csums(struct btrfs_trans_h
 		path->leave_spinning = 1;
 		ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
 		if (ret > 0) {
+			ret = 0;
 			if (path->slots[0] == 0)
 				break;
 			path->slots[0]--;
@@ -661,7 +662,7 @@ int btrfs_del_csums(struct btrfs_trans_h
 			ret = btrfs_del_items(trans, root, path,
 					      path->slots[0], del_nr);
 			if (ret)
-				goto out;
+				break;
 			if (key.offset == bytenr)
 				break;
 		} else if (key.offset < bytenr && csum_end > end_byte) {
@@ -705,8 +706,9 @@ int btrfs_del_csums(struct btrfs_trans_h
 			ret = btrfs_split_item(trans, root, path, &key, offset);
 			if (ret && ret != -EAGAIN) {
 				btrfs_abort_transaction(trans, ret);
-				goto out;
+				break;
 			}
+			ret = 0;
 
 			key.offset = end_byte - 1;
 		} else {
@@ -716,8 +718,6 @@ int btrfs_del_csums(struct btrfs_trans_h
 		}
 		btrfs_release_path(path);
 	}
-	ret = 0;
-out:
 	btrfs_free_path(path);
 	return ret;
 }

[PATCH 4.19 37/58] btrfs: return errors from btrfs_del_csums in cleanup_ref_head

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

commit 856bd270dc4db209c779ce1e9555c7641ffbc88e upstream.

We are unconditionally returning 0 in cleanup_ref_head, despite the fact
that btrfs_del_csums could fail.  We need to return the error so the
transaction gets aborted properly, fix this by returning ret from
btrfs_del_csums in cleanup_ref_head.

Reviewed-by: Qu Wenruo <wqu@suse.com>
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/extent-tree.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -2501,7 +2501,7 @@ static int cleanup_ref_head(struct btrfs
 				      head->qgroup_reserved);
 	btrfs_delayed_ref_unlock(head);
 	btrfs_put_delayed_ref_head(head);
-	return 0;
+	return ret;
 }
 
 /*

[PATCH 4.19 38/58] btrfs: fixup error handling in fixup_inode_link_counts

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

commit 011b28acf940eb61c000059dd9e2cfcbf52ed96b upstream.

This function has the following pattern

	while (1) {
		ret = whatever();
		if (ret)
			goto out;
	}
	ret = 0
out:
	return ret;

However several places in this while loop we simply break; when there's
a problem, thus clearing the return value, and in one case we do a
return -EIO, and leak the memory for the path.

Fix this by re-arranging the loop to deal with ret == 1 coming from
btrfs_search_slot, and then simply delete the

	ret = 0;
out:

bit so everybody can break if there is an error, which will allow for
proper error handling to occur.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/tree-log.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -1699,6 +1699,7 @@ static noinline int fixup_inode_link_cou
 			break;
 
 		if (ret == 1) {
+			ret = 0;
 			if (path->slots[0] == 0)
 				break;
 			path->slots[0]--;
@@ -1711,17 +1712,19 @@ static noinline int fixup_inode_link_cou
 
 		ret = btrfs_del_item(trans, root, path);
 		if (ret)
-			goto out;
+			break;
 
 		btrfs_release_path(path);
 		inode = read_one_inode(root, key.offset);
-		if (!inode)
-			return -EIO;
+		if (!inode) {
+			ret = -EIO;
+			break;
+		}
 
 		ret = fixup_inode_link_count(trans, root, inode);
 		iput(inode);
 		if (ret)
-			goto out;
+			break;
 
 		/*
 		 * fixup on a directory may create new entries,
@@ -1730,8 +1733,6 @@ static noinline int fixup_inode_link_cou
 		 */
 		key.offset = (u64)-1;
 	}
-	ret = 0;
-out:
 	btrfs_release_path(path);
 	return ret;
 }

[PATCH 4.19 39/58] mm, hugetlb: fix simple resv_huge_pages underflow on UFFDIO_COPY

[Greg Kroah-Hartman]

From: Mina Almasry <almasrymina@google.com>

[ Upstream commit d84cf06e3dd8c5c5b547b5d8931015fc536678e5 ]

The userfaultfd hugetlb tests cause a resv_huge_pages underflow.  This
happens when hugetlb_mcopy_atomic_pte() is called with !is_continue on
an index for which we already have a page in the cache.  When this
happens, we allocate a second page, double consuming the reservation,
and then fail to insert the page into the cache and return -EEXIST.

To fix this, we first check if there is a page in the cache which
already consumed the reservation, and return -EEXIST immediately if so.

There is still a rare condition where we fail to copy the page contents
AND race with a call for hugetlb_no_page() for this index and again we
will underflow resv_huge_pages.  That is fixed in a more complicated
patch not targeted for -stable.

Test:

  Hacked the code locally such that resv_huge_pages underflows produce a
  warning, then:

  ./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
	2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
  ./tools/testing/selftests/vm/userfaultfd hugetlb 10
	2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success

Both tests succeed and produce no warnings.  After the test runs number
of free/resv hugepages is correct.

[mike.kravetz@oracle.com: changelog fixes]

Link: https://lkml.kernel.org/r/20210528004649.85298-1-almasrymina@google.com
Fixes: 8fb5debc5fcd ("userfaultfd: hugetlbfs: add hugetlb_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/hugetlb.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 2f769a661568..c69f12e4c149 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -4154,10 +4154,20 @@ int hugetlb_mcopy_atomic_pte(struct mm_struct *dst_mm,
 	struct page *page;
 
 	if (!*pagep) {
-		ret = -ENOMEM;
+		/* If a page already exists, then it's UFFDIO_COPY for
+		 * a non-missing case. Return -EEXIST.
+		 */
+		if (vm_shared &&
+		    hugetlbfs_pagecache_present(h, dst_vma, dst_addr)) {
+			ret = -EEXIST;
+			goto out;
+		}
+
 		page = alloc_huge_page(dst_vma, dst_addr, 0);
-		if (IS_ERR(page))
+		if (IS_ERR(page)) {
+			ret = -ENOMEM;
 			goto out;
+		}
 
 		ret = copy_huge_page_from_user(page,
 						(const void __user *) src_addr,
-- 
2.30.2

[PATCH 4.19 40/58] bpf: fix test suite to enable all unpriv program types

[Greg Kroah-Hartman]

From: Daniel Borkmann <daniel@iogearbox.net>

commit 36641ad61db5ce9befd5eb0071abb36eaff16cfc upstream

Given BPF_PROG_TYPE_CGROUP_SKB program types are also valid in an
unprivileged setting, lets not omit these tests and potentially
have issues fall through the cracks. Make this more obvious by
adding a small test_as_unpriv() helper.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/bpf/test_verifier.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -4798,6 +4798,7 @@ static struct bpf_test tests[] = {
 		.fixup_cgroup_storage = { 1 },
 		.result = REJECT,
 		.errstr = "get_local_storage() doesn't support non-zero flags",
+		.errstr_unpriv = "R2 leaks addr into helper function",
 		.prog_type = BPF_PROG_TYPE_CGROUP_SKB,
 	},
 	{
@@ -12963,6 +12964,13 @@ static void get_unpriv_disabled()
 	fclose(fd);
 }
 
+static bool test_as_unpriv(struct bpf_test *test)
+{
+	return !test->prog_type ||
+	       test->prog_type == BPF_PROG_TYPE_SOCKET_FILTER ||
+	       test->prog_type == BPF_PROG_TYPE_CGROUP_SKB;
+}
+
 static int do_test(bool unpriv, unsigned int from, unsigned int to)
 {
 	int i, passes = 0, errors = 0, skips = 0;
@@ -12973,10 +12981,10 @@ static int do_test(bool unpriv, unsigned
 		/* Program types that are not supported by non-root we
 		 * skip right away.
 		 */
-		if (!test->prog_type && unpriv_disabled) {
+		if (test_as_unpriv(test) && unpriv_disabled) {
 			printf("#%d/u %s SKIP\n", i, test->descr);
 			skips++;
-		} else if (!test->prog_type) {
+		} else if (test_as_unpriv(test)) {
 			if (!unpriv)
 				set_admin(false);
 			printf("#%d/u %s ", i, test->descr);

[PATCH 4.19 41/58] bpf: test make sure to run unpriv test cases in test_verifier

[Greg Kroah-Hartman]

From: Daniel Borkmann <daniel@iogearbox.net>

commit 832c6f2c29ec519b766923937f4f93fb1008b47d upstream

Right now unprivileged tests are never executed as a BPF test run,
only loaded. Allow for running them as well so that we can check
the outcome and probe for regressions.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/bpf/test_verifier.c |   71 +++++++++++++++-------------
 1 file changed, 40 insertions(+), 31 deletions(-)

--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -70,7 +70,7 @@ struct bpf_test {
 	int fixup_cgroup_storage[MAX_FIXUPS];
 	const char *errstr;
 	const char *errstr_unpriv;
-	uint32_t retval;
+	uint32_t retval, retval_unpriv;
 	enum {
 		UNDEF,
 		ACCEPT,
@@ -2986,6 +2986,8 @@ static struct bpf_test tests[] = {
 		.fixup_prog1 = { 2 },
 		.result = ACCEPT,
 		.retval = 42,
+		/* Verifier rewrite for unpriv skips tail call here. */
+		.retval_unpriv = 2,
 	},
 	{
 		"stack pointer arithmetic",
@@ -12811,6 +12813,33 @@ static void do_test_fixup(struct bpf_tes
 	}
 }
 
+static int set_admin(bool admin)
+{
+	cap_t caps;
+	const cap_value_t cap_val = CAP_SYS_ADMIN;
+	int ret = -1;
+
+	caps = cap_get_proc();
+	if (!caps) {
+		perror("cap_get_proc");
+		return -1;
+	}
+	if (cap_set_flag(caps, CAP_EFFECTIVE, 1, &cap_val,
+				admin ? CAP_SET : CAP_CLEAR)) {
+		perror("cap_set_flag");
+		goto out;
+	}
+	if (cap_set_proc(caps)) {
+		perror("cap_set_proc");
+		goto out;
+	}
+	ret = 0;
+out:
+	if (cap_free(caps))
+		perror("cap_free");
+	return ret;
+}
+
 static void do_test_single(struct bpf_test *test, bool unpriv,
 			   int *passes, int *errors)
 {
@@ -12819,6 +12848,7 @@ static void do_test_single(struct bpf_te
 	struct bpf_insn *prog = test->insns;
 	int map_fds[MAX_NR_MAPS];
 	const char *expected_err;
+	uint32_t expected_val;
 	uint32_t retval;
 	int i, err;
 
@@ -12836,6 +12866,8 @@ static void do_test_single(struct bpf_te
 		       test->result_unpriv : test->result;
 	expected_err = unpriv && test->errstr_unpriv ?
 		       test->errstr_unpriv : test->errstr;
+	expected_val = unpriv && test->retval_unpriv ?
+		       test->retval_unpriv : test->retval;
 
 	reject_from_alignment = fd_prog < 0 &&
 				(test->flags & F_NEEDS_EFFICIENT_UNALIGNED_ACCESS) &&
@@ -12869,16 +12901,20 @@ static void do_test_single(struct bpf_te
 		__u8 tmp[TEST_DATA_LEN << 2];
 		__u32 size_tmp = sizeof(tmp);
 
+		if (unpriv)
+			set_admin(true);
 		err = bpf_prog_test_run(fd_prog, 1, test->data,
 					sizeof(test->data), tmp, &size_tmp,
 					&retval, NULL);
+		if (unpriv)
+			set_admin(false);
 		if (err && errno != 524/*ENOTSUPP*/ && errno != EPERM) {
 			printf("Unexpected bpf_prog_test_run error\n");
 			goto fail_log;
 		}
-		if (!err && retval != test->retval &&
-		    test->retval != POINTER_VALUE) {
-			printf("FAIL retval %d != %d\n", retval, test->retval);
+		if (!err && retval != expected_val &&
+		    expected_val != POINTER_VALUE) {
+			printf("FAIL retval %d != %d\n", retval, expected_val);
 			goto fail_log;
 		}
 	}
@@ -12921,33 +12957,6 @@ static bool is_admin(void)
 	return (sysadmin == CAP_SET);
 }
 
-static int set_admin(bool admin)
-{
-	cap_t caps;
-	const cap_value_t cap_val = CAP_SYS_ADMIN;
-	int ret = -1;
-
-	caps = cap_get_proc();
-	if (!caps) {
-		perror("cap_get_proc");
-		return -1;
-	}
-	if (cap_set_flag(caps, CAP_EFFECTIVE, 1, &cap_val,
-				admin ? CAP_SET : CAP_CLEAR)) {
-		perror("cap_set_flag");
-		goto out;
-	}
-	if (cap_set_proc(caps)) {
-		perror("cap_set_proc");
-		goto out;
-	}
-	ret = 0;
-out:
-	if (cap_free(caps))
-		perror("cap_free");
-	return ret;
-}
-
 static void get_unpriv_disabled()
 {
 	char buf[2];

[PATCH 4.19 42/58] selftests/bpf: Generalize dummy program types

[Greg Kroah-Hartman]

From: Joe Stringer <joe@wand.net.nz>

commit 0c586079f852187d19fea60c9a4981ad29e22ba8 upstream

Don't hardcode the dummy program types to SOCKET_FILTER type, as this
prevents testing bpf_tail_call in conjunction with other program types.
Instead, use the program type specified in the test case.

Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/bpf/test_verifier.c |   31 +++++++++++++++-------------
 1 file changed, 17 insertions(+), 14 deletions(-)

--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -12631,18 +12631,18 @@ static int create_map(uint32_t type, uin
 	return fd;
 }
 
-static int create_prog_dummy1(void)
+static int create_prog_dummy1(enum bpf_map_type prog_type)
 {
 	struct bpf_insn prog[] = {
 		BPF_MOV64_IMM(BPF_REG_0, 42),
 		BPF_EXIT_INSN(),
 	};
 
-	return bpf_load_program(BPF_PROG_TYPE_SOCKET_FILTER, prog,
+	return bpf_load_program(prog_type, prog,
 				ARRAY_SIZE(prog), "GPL", 0, NULL, 0);
 }
 
-static int create_prog_dummy2(int mfd, int idx)
+static int create_prog_dummy2(enum bpf_map_type prog_type, int mfd, int idx)
 {
 	struct bpf_insn prog[] = {
 		BPF_MOV64_IMM(BPF_REG_3, idx),
@@ -12653,11 +12653,12 @@ static int create_prog_dummy2(int mfd, i
 		BPF_EXIT_INSN(),
 	};
 
-	return bpf_load_program(BPF_PROG_TYPE_SOCKET_FILTER, prog,
+	return bpf_load_program(prog_type, prog,
 				ARRAY_SIZE(prog), "GPL", 0, NULL, 0);
 }
 
-static int create_prog_array(uint32_t max_elem, int p1key)
+static int create_prog_array(enum bpf_map_type prog_type, uint32_t max_elem,
+			     int p1key)
 {
 	int p2key = 1;
 	int mfd, p1fd, p2fd;
@@ -12669,8 +12670,8 @@ static int create_prog_array(uint32_t ma
 		return -1;
 	}
 
-	p1fd = create_prog_dummy1();
-	p2fd = create_prog_dummy2(mfd, p2key);
+	p1fd = create_prog_dummy1(prog_type);
+	p2fd = create_prog_dummy2(prog_type, mfd, p2key);
 	if (p1fd < 0 || p2fd < 0)
 		goto out;
 	if (bpf_map_update_elem(mfd, &p1key, &p1fd, BPF_ANY) < 0)
@@ -12725,8 +12726,8 @@ static int create_cgroup_storage(void)
 
 static char bpf_vlog[UINT_MAX >> 8];
 
-static void do_test_fixup(struct bpf_test *test, struct bpf_insn *prog,
-			  int *map_fds)
+static void do_test_fixup(struct bpf_test *test, enum bpf_map_type prog_type,
+			  struct bpf_insn *prog, int *map_fds)
 {
 	int *fixup_map1 = test->fixup_map1;
 	int *fixup_map2 = test->fixup_map2;
@@ -12781,7 +12782,7 @@ static void do_test_fixup(struct bpf_tes
 	}
 
 	if (*fixup_prog1) {
-		map_fds[4] = create_prog_array(4, 0);
+		map_fds[4] = create_prog_array(prog_type, 4, 0);
 		do {
 			prog[*fixup_prog1].imm = map_fds[4];
 			fixup_prog1++;
@@ -12789,7 +12790,7 @@ static void do_test_fixup(struct bpf_tes
 	}
 
 	if (*fixup_prog2) {
-		map_fds[5] = create_prog_array(8, 7);
+		map_fds[5] = create_prog_array(prog_type, 8, 7);
 		do {
 			prog[*fixup_prog2].imm = map_fds[5];
 			fixup_prog2++;
@@ -12855,11 +12856,13 @@ static void do_test_single(struct bpf_te
 	for (i = 0; i < MAX_NR_MAPS; i++)
 		map_fds[i] = -1;
 
-	do_test_fixup(test, prog, map_fds);
+	if (!prog_type)
+		prog_type = BPF_PROG_TYPE_SOCKET_FILTER;
+	do_test_fixup(test, prog_type, prog, map_fds);
 	prog_len = probe_filter_length(prog);
 
-	fd_prog = bpf_verify_program(prog_type ? : BPF_PROG_TYPE_SOCKET_FILTER,
-				     prog, prog_len, test->flags & F_LOAD_WITH_STRICT_ALIGNMENT,
+	fd_prog = bpf_verify_program(prog_type, prog, prog_len,
+				     test->flags & F_LOAD_WITH_STRICT_ALIGNMENT,
 				     "GPL", 0, bpf_vlog, sizeof(bpf_vlog), 1);
 
 	expected_ret = unpriv && test->result_unpriv != UNDEF ?

[PATCH 4.19 43/58] bpf: Add BPF_F_ANY_ALIGNMENT.

[Greg Kroah-Hartman]

From: "David S. Miller" <davem@davemloft.net>

commit e9ee9efc0d176512cdce9d27ff8549d7ffa2bfcd upstream

Often we want to write tests cases that check things like bad context
offset accesses.  And one way to do this is to use an odd offset on,
for example, a 32-bit load.

This unfortunately triggers the alignment checks first on platforms
that do not set CONFIG_EFFICIENT_UNALIGNED_ACCESS.  So the test
case see the alignment failure rather than what it was testing for.

It is often not completely possible to respect the original intention
of the test, or even test the same exact thing, while solving the
alignment issue.

Another option could have been to check the alignment after the
context and other validations are performed by the verifier, but
that is a non-trivial change to the verifier.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/uapi/linux/bpf.h                    |   14 ++++++++++++++
 kernel/bpf/syscall.c                        |    7 ++++++-
 kernel/bpf/verifier.c                       |    3 +++
 tools/include/uapi/linux/bpf.h              |   14 ++++++++++++++
 tools/lib/bpf/bpf.c                         |    8 ++++----
 tools/lib/bpf/bpf.h                         |    2 +-
 tools/testing/selftests/bpf/test_align.c    |    4 ++--
 tools/testing/selftests/bpf/test_verifier.c |    3 ++-
 8 files changed, 46 insertions(+), 9 deletions(-)

--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -228,6 +228,20 @@ enum bpf_attach_type {
  */
 #define BPF_F_STRICT_ALIGNMENT	(1U << 0)
 
+/* If BPF_F_ANY_ALIGNMENT is used in BPF_PROF_LOAD command, the
+ * verifier will allow any alignment whatsoever.  On platforms
+ * with strict alignment requirements for loads ands stores (such
+ * as sparc and mips) the verifier validates that all loads and
+ * stores provably follow this requirement.  This flag turns that
+ * checking and enforcement off.
+ *
+ * It is mostly used for testing when we want to validate the
+ * context and memory access aspects of the verifier, but because
+ * of an unaligned access the alignment check would trigger before
+ * the one we are interested in.
+ */
+#define BPF_F_ANY_ALIGNMENT	(1U << 1)
+
 /* when bpf_ldimm64->src_reg == BPF_PSEUDO_MAP_FD, bpf_ldimm64->imm == fd */
 #define BPF_PSEUDO_MAP_FD	1
 
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -1367,9 +1367,14 @@ static int bpf_prog_load(union bpf_attr
 	if (CHECK_ATTR(BPF_PROG_LOAD))
 		return -EINVAL;
 
-	if (attr->prog_flags & ~BPF_F_STRICT_ALIGNMENT)
+	if (attr->prog_flags & ~(BPF_F_STRICT_ALIGNMENT | BPF_F_ANY_ALIGNMENT))
 		return -EINVAL;
 
+	if (!IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) &&
+	    (attr->prog_flags & BPF_F_ANY_ALIGNMENT) &&
+	    !capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
 	/* copy eBPF program license from user space */
 	if (strncpy_from_user(license, u64_to_user_ptr(attr->license),
 			      sizeof(license) - 1) < 0)
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -6440,6 +6440,9 @@ int bpf_check(struct bpf_prog **prog, un
 	if (!IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS))
 		env->strict_alignment = true;
 
+	if (attr->prog_flags & BPF_F_ANY_ALIGNMENT)
+		env->strict_alignment = false;
+
 	ret = replace_map_fd_with_map_ptr(env);
 	if (ret < 0)
 		goto skip_full_check;
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -226,6 +226,20 @@ enum bpf_attach_type {
  */
 #define BPF_F_STRICT_ALIGNMENT	(1U << 0)
 
+/* If BPF_F_ANY_ALIGNMENT is used in BPF_PROF_LOAD command, the
+ * verifier will allow any alignment whatsoever.  On platforms
+ * with strict alignment requirements for loads ands stores (such
+ * as sparc and mips) the verifier validates that all loads and
+ * stores provably follow this requirement.  This flag turns that
+ * checking and enforcement off.
+ *
+ * It is mostly used for testing when we want to validate the
+ * context and memory access aspects of the verifier, but because
+ * of an unaligned access the alignment check would trigger before
+ * the one we are interested in.
+ */
+#define BPF_F_ANY_ALIGNMENT	(1U << 1)
+
 /* when bpf_ldimm64->src_reg == BPF_PSEUDO_MAP_FD, bpf_ldimm64->imm == fd */
 #define BPF_PSEUDO_MAP_FD	1
 
--- a/tools/lib/bpf/bpf.c
+++ b/tools/lib/bpf/bpf.c
@@ -261,9 +261,9 @@ int bpf_load_program(enum bpf_prog_type
 }
 
 int bpf_verify_program(enum bpf_prog_type type, const struct bpf_insn *insns,
-		       size_t insns_cnt, int strict_alignment,
-		       const char *license, __u32 kern_version,
-		       char *log_buf, size_t log_buf_sz, int log_level)
+		       size_t insns_cnt, __u32 prog_flags, const char *license,
+		       __u32 kern_version, char *log_buf, size_t log_buf_sz,
+		       int log_level)
 {
 	union bpf_attr attr;
 
@@ -277,7 +277,7 @@ int bpf_verify_program(enum bpf_prog_typ
 	attr.log_level = log_level;
 	log_buf[0] = 0;
 	attr.kern_version = kern_version;
-	attr.prog_flags = strict_alignment ? BPF_F_STRICT_ALIGNMENT : 0;
+	attr.prog_flags = prog_flags;
 
 	return sys_bpf_prog_load(&attr, sizeof(attr));
 }
--- a/tools/lib/bpf/bpf.h
+++ b/tools/lib/bpf/bpf.h
@@ -79,7 +79,7 @@ int bpf_load_program(enum bpf_prog_type
 		     __u32 kern_version, char *log_buf,
 		     size_t log_buf_sz);
 int bpf_verify_program(enum bpf_prog_type type, const struct bpf_insn *insns,
-		       size_t insns_cnt, int strict_alignment,
+		       size_t insns_cnt, __u32 prog_flags,
 		       const char *license, __u32 kern_version,
 		       char *log_buf, size_t log_buf_sz, int log_level);
 
--- a/tools/testing/selftests/bpf/test_align.c
+++ b/tools/testing/selftests/bpf/test_align.c
@@ -620,8 +620,8 @@ static int do_test_single(struct bpf_ali
 
 	prog_len = probe_filter_length(prog);
 	fd_prog = bpf_verify_program(prog_type ? : BPF_PROG_TYPE_SOCKET_FILTER,
-				     prog, prog_len, 1, "GPL", 0,
-				     bpf_vlog, sizeof(bpf_vlog), 2);
+				     prog, prog_len, BPF_F_STRICT_ALIGNMENT,
+				     "GPL", 0, bpf_vlog, sizeof(bpf_vlog), 2);
 	if (fd_prog < 0 && test->result != REJECT) {
 		printf("Failed to load program.\n");
 		printf("%s", bpf_vlog);
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -12862,7 +12862,8 @@ static void do_test_single(struct bpf_te
 	prog_len = probe_filter_length(prog);
 
 	fd_prog = bpf_verify_program(prog_type, prog, prog_len,
-				     test->flags & F_LOAD_WITH_STRICT_ALIGNMENT,
+				     test->flags & F_LOAD_WITH_STRICT_ALIGNMENT ?
+				     BPF_F_STRICT_ALIGNMENT : 0,
 				     "GPL", 0, bpf_vlog, sizeof(bpf_vlog), 1);
 
 	expected_ret = unpriv && test->result_unpriv != UNDEF ?

[PATCH 4.19 44/58] bpf: Adjust F_NEEDS_EFFICIENT_UNALIGNED_ACCESS handling in test_verifier.c

[Greg Kroah-Hartman]

From: "David S. Miller" <davem@davemloft.net>

commit c7665702d3208b77b8e00f0699b6b88241b04360 upstream

Make it set the flag argument to bpf_verify_program() which will relax
the alignment restrictions.

Now all such test cases will go properly through the verifier even on
inefficient unaligned access architectures.

On inefficient unaligned access architectures do not try to run such
programs, instead mark the test case as passing but annotate the
result similarly to how it is done now in the presence of this flag.

So, we get complete full coverage for all REJECT test cases, and at
least verifier level coverage for ACCEPT test cases.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/bpf/test_verifier.c |   42 ++++++++++++++++------------
 1 file changed, 24 insertions(+), 18 deletions(-)

--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -12844,13 +12844,14 @@ out:
 static void do_test_single(struct bpf_test *test, bool unpriv,
 			   int *passes, int *errors)
 {
-	int fd_prog, expected_ret, reject_from_alignment;
+	int fd_prog, expected_ret, alignment_prevented_execution;
 	int prog_len, prog_type = test->prog_type;
 	struct bpf_insn *prog = test->insns;
 	int map_fds[MAX_NR_MAPS];
 	const char *expected_err;
 	uint32_t expected_val;
 	uint32_t retval;
+	__u32 pflags;
 	int i, err;
 
 	for (i = 0; i < MAX_NR_MAPS; i++)
@@ -12861,9 +12862,12 @@ static void do_test_single(struct bpf_te
 	do_test_fixup(test, prog_type, prog, map_fds);
 	prog_len = probe_filter_length(prog);
 
-	fd_prog = bpf_verify_program(prog_type, prog, prog_len,
-				     test->flags & F_LOAD_WITH_STRICT_ALIGNMENT ?
-				     BPF_F_STRICT_ALIGNMENT : 0,
+	pflags = 0;
+	if (test->flags & F_LOAD_WITH_STRICT_ALIGNMENT)
+		pflags |= BPF_F_STRICT_ALIGNMENT;
+	if (test->flags & F_NEEDS_EFFICIENT_UNALIGNED_ACCESS)
+		pflags |= BPF_F_ANY_ALIGNMENT;
+	fd_prog = bpf_verify_program(prog_type, prog, prog_len, pflags,
 				     "GPL", 0, bpf_vlog, sizeof(bpf_vlog), 1);
 
 	expected_ret = unpriv && test->result_unpriv != UNDEF ?
@@ -12873,28 +12877,27 @@ static void do_test_single(struct bpf_te
 	expected_val = unpriv && test->retval_unpriv ?
 		       test->retval_unpriv : test->retval;
 
-	reject_from_alignment = fd_prog < 0 &&
-				(test->flags & F_NEEDS_EFFICIENT_UNALIGNED_ACCESS) &&
-				strstr(bpf_vlog, "misaligned");
-#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
-	if (reject_from_alignment) {
-		printf("FAIL\nFailed due to alignment despite having efficient unaligned access: '%s'!\n",
-		       strerror(errno));
-		goto fail_log;
-	}
-#endif
+	alignment_prevented_execution = 0;
+
 	if (expected_ret == ACCEPT) {
-		if (fd_prog < 0 && !reject_from_alignment) {
+		if (fd_prog < 0) {
 			printf("FAIL\nFailed to load prog '%s'!\n",
 			       strerror(errno));
 			goto fail_log;
 		}
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+		if (fd_prog >= 0 &&
+		    (test->flags & F_NEEDS_EFFICIENT_UNALIGNED_ACCESS)) {
+			alignment_prevented_execution = 1;
+			goto test_ok;
+		}
+#endif
 	} else {
 		if (fd_prog >= 0) {
 			printf("FAIL\nUnexpected success to load!\n");
 			goto fail_log;
 		}
-		if (!strstr(bpf_vlog, expected_err) && !reject_from_alignment) {
+		if (!strstr(bpf_vlog, expected_err)) {
 			printf("FAIL\nUnexpected error message!\n\tEXP: %s\n\tRES: %s\n",
 			      expected_err, bpf_vlog);
 			goto fail_log;
@@ -12922,9 +12925,12 @@ static void do_test_single(struct bpf_te
 			goto fail_log;
 		}
 	}
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+test_ok:
+#endif
 	(*passes)++;
-	printf("OK%s\n", reject_from_alignment ?
-	       " (NOTE: reject due to unknown alignment)" : "");
+	printf("OK%s\n", alignment_prevented_execution ?
+	       " (NOTE: not executed due to unknown alignment)" : "");
 close_fds:
 	close(fd_prog);
 	for (i = 0; i < MAX_NR_MAPS; i++)

[PATCH 4.19 45/58] bpf: Make more use of any alignment in test_verifier.c

[Greg Kroah-Hartman]

From: "David S. Miller" <davem@davemloft.net>

commit 2acc5fd5b8c25df0de7f3c8b8e385f5c6f8202ec upstream

Use F_NEEDS_EFFICIENT_UNALIGNED_ACCESS in more tests where the
expected result is REJECT.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/bpf/test_verifier.c |   41 ++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -1799,6 +1799,7 @@ static struct bpf_test tests[] = {
 		.errstr = "invalid bpf_context access",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_SK_MSG,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"direct packet read for SK_MSG",
@@ -2191,6 +2192,7 @@ static struct bpf_test tests[] = {
 		},
 		.errstr = "invalid bpf_context access",
 		.result = REJECT,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"check cb access: half, wrong type",
@@ -3151,6 +3153,7 @@ static struct bpf_test tests[] = {
 		.result = REJECT,
 		.errstr = "R0 invalid mem access 'inv'",
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"raw_stack: skb_load_bytes, spilled regs corruption 2",
@@ -3181,6 +3184,7 @@ static struct bpf_test tests[] = {
 		.result = REJECT,
 		.errstr = "R3 invalid mem access 'inv'",
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"raw_stack: skb_load_bytes, spilled regs + data",
@@ -3680,6 +3684,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R2 invalid mem access 'inv'",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"direct packet access: test16 (arith on data_end)",
@@ -3863,6 +3868,7 @@ static struct bpf_test tests[] = {
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 		.result = REJECT,
 		.errstr = "invalid access to packet, off=0 size=8, R5(id=1,off=0,r=0)",
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"direct packet access: test24 (x += pkt_ptr, 5)",
@@ -4767,6 +4773,7 @@ static struct bpf_test tests[] = {
 		.result = REJECT,
 		.errstr = "invalid access to map value, value_size=64 off=-2 size=4",
 		.prog_type = BPF_PROG_TYPE_CGROUP_SKB,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"invalid cgroup storage access 5",
@@ -6433,6 +6440,7 @@ static struct bpf_test tests[] = {
 		.errstr = "invalid mem access 'inv'",
 		.result = REJECT,
 		.result_unpriv = REJECT,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"map element value illegal alu op, 5",
@@ -6455,6 +6463,7 @@ static struct bpf_test tests[] = {
 		.fixup_map2 = { 3 },
 		.errstr = "R0 invalid mem access 'inv'",
 		.result = REJECT,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"map element value is preserved across register spilling",
@@ -8951,6 +8960,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R1 offset is outside of the packet",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_end > pkt_data', good access",
@@ -8989,6 +8999,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R1 offset is outside of the packet",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_end > pkt_data', bad access 2",
@@ -9007,6 +9018,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R1 offset is outside of the packet",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_data' < pkt_end, good access",
@@ -9045,6 +9057,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R1 offset is outside of the packet",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_data' < pkt_end, bad access 2",
@@ -9063,6 +9076,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R1 offset is outside of the packet",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_end < pkt_data', good access",
@@ -9117,6 +9131,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R1 offset is outside of the packet",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_data' >= pkt_end, good access",
@@ -9153,6 +9168,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R1 offset is outside of the packet",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_data' >= pkt_end, bad access 2",
@@ -9228,6 +9244,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R1 offset is outside of the packet",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_data' <= pkt_end, good access",
@@ -9284,6 +9301,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R1 offset is outside of the packet",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_end <= pkt_data', good access",
@@ -9320,6 +9338,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R1 offset is outside of the packet",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_end <= pkt_data', bad access 2",
@@ -9393,6 +9412,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R1 offset is outside of the packet",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_data > pkt_meta', good access",
@@ -9431,6 +9451,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R1 offset is outside of the packet",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_data > pkt_meta', bad access 2",
@@ -9449,6 +9470,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R1 offset is outside of the packet",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_meta' < pkt_data, good access",
@@ -9487,6 +9509,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R1 offset is outside of the packet",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_meta' < pkt_data, bad access 2",
@@ -9505,6 +9528,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R1 offset is outside of the packet",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_data < pkt_meta', good access",
@@ -9559,6 +9583,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R1 offset is outside of the packet",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_meta' >= pkt_data, good access",
@@ -9595,6 +9620,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R1 offset is outside of the packet",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_meta' >= pkt_data, bad access 2",
@@ -9670,6 +9696,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R1 offset is outside of the packet",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_meta' <= pkt_data, good access",
@@ -9726,6 +9753,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R1 offset is outside of the packet",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_data <= pkt_meta', good access",
@@ -9762,6 +9790,7 @@ static struct bpf_test tests[] = {
 		.errstr = "R1 offset is outside of the packet",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_data <= pkt_meta', bad access 2",
@@ -9876,6 +9905,7 @@ static struct bpf_test tests[] = {
 		.errstr_unpriv = "R1 has pointer with unsupported alu operation",
 		.errstr = "dereference of modified ctx ptr",
 		.result = REJECT,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"check deducing bounds from const, 8",
@@ -9890,6 +9920,7 @@ static struct bpf_test tests[] = {
 		.errstr_unpriv = "R1 has pointer with unsupported alu operation",
 		.errstr = "dereference of modified ctx ptr",
 		.result = REJECT,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"check deducing bounds from const, 9",
@@ -10365,6 +10396,7 @@ static struct bpf_test tests[] = {
 		.result = REJECT,
 		.errstr = "R6 invalid mem access 'inv'",
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"calls: two calls with args",
@@ -11230,6 +11262,7 @@ static struct bpf_test tests[] = {
 		.fixup_map1 = { 12, 22 },
 		.result = REJECT,
 		.errstr = "invalid access to map value, value_size=8 off=2 size=8",
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"calls: two calls that receive map_value via arg=ptr_stack_of_caller. test2",
@@ -11373,6 +11406,7 @@ static struct bpf_test tests[] = {
 		.fixup_map1 = { 12, 22 },
 		.result = REJECT,
 		.errstr = "invalid access to map value, value_size=8 off=2 size=8",
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"calls: two calls that receive map_value_ptr_or_null via arg. test1",
@@ -11544,6 +11578,7 @@ static struct bpf_test tests[] = {
 		.result = ACCEPT,
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 		.retval = POINTER_VALUE,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"calls: pkt_ptr spill into caller stack 2",
@@ -11575,6 +11610,7 @@ static struct bpf_test tests[] = {
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 		.errstr = "invalid access to packet",
 		.result = REJECT,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"calls: pkt_ptr spill into caller stack 3",
@@ -11677,6 +11713,7 @@ static struct bpf_test tests[] = {
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 		.errstr = "same insn cannot be used with different",
 		.result = REJECT,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"calls: pkt_ptr spill into caller stack 6",
@@ -11712,6 +11749,7 @@ static struct bpf_test tests[] = {
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 		.errstr = "R4 invalid mem access",
 		.result = REJECT,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"calls: pkt_ptr spill into caller stack 7",
@@ -11746,6 +11784,7 @@ static struct bpf_test tests[] = {
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 		.errstr = "R4 invalid mem access",
 		.result = REJECT,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"calls: pkt_ptr spill into caller stack 8",
@@ -11827,6 +11866,7 @@ static struct bpf_test tests[] = {
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 		.errstr = "invalid access to packet",
 		.result = REJECT,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"calls: caller stack init to zero or map_value_or_null",
@@ -12192,6 +12232,7 @@ static struct bpf_test tests[] = {
 		.result = REJECT,
 		.errstr = "BPF_XADD stores into R2 packet",
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"xadd/w check whether src/dst got mangled, 1",

[PATCH 4.19 46/58] bpf: Apply F_NEEDS_EFFICIENT_UNALIGNED_ACCESS to more ACCEPT test cases.

[Greg Kroah-Hartman]

From: "David S. Miller" <davem@davemloft.net>

commit 0a68632488aa0129ed530af9ae9e8573f5650812 upstream

If a testcase has alignment problems but is expected to be ACCEPT,
verify it using F_NEEDS_EFFICIENT_UNALIGNED_ACCESS too.

Maybe in the future if we add some architecture specific code to elide
the unaligned memory access warnings during the test, we can execute
these as well.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/bpf/test_verifier.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -3787,6 +3787,7 @@ static struct bpf_test tests[] = {
 		},
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 		.result = ACCEPT,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"direct packet access: test21 (x += pkt_ptr, 2)",
@@ -3812,6 +3813,7 @@ static struct bpf_test tests[] = {
 		},
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 		.result = ACCEPT,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"direct packet access: test22 (x += pkt_ptr, 3)",
@@ -3842,6 +3844,7 @@ static struct bpf_test tests[] = {
 		},
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 		.result = ACCEPT,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"direct packet access: test23 (x += pkt_ptr, 4)",
@@ -3894,6 +3897,7 @@ static struct bpf_test tests[] = {
 		},
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 		.result = ACCEPT,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"direct packet access: test25 (marking on <, good access)",
@@ -6957,6 +6961,7 @@ static struct bpf_test tests[] = {
 		.result = ACCEPT,
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 		.retval = 0 /* csum_diff of 64-byte packet */,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"helper access to variable memory: size = 0 not allowed on NULL (!ARG_PTR_TO_MEM_OR_NULL)",
@@ -8923,6 +8928,7 @@ static struct bpf_test tests[] = {
 		},
 		.result = ACCEPT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_data' > pkt_end, bad access 1",
@@ -9094,6 +9100,7 @@ static struct bpf_test tests[] = {
 		},
 		.result = ACCEPT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_end < pkt_data', bad access 1",
@@ -9206,6 +9213,7 @@ static struct bpf_test tests[] = {
 		},
 		.result = ACCEPT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_end >= pkt_data', bad access 1",
@@ -9263,6 +9271,7 @@ static struct bpf_test tests[] = {
 		},
 		.result = ACCEPT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_data' <= pkt_end, bad access 1",
@@ -9375,6 +9384,7 @@ static struct bpf_test tests[] = {
 		},
 		.result = ACCEPT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_meta' > pkt_data, bad access 1",
@@ -9546,6 +9556,7 @@ static struct bpf_test tests[] = {
 		},
 		.result = ACCEPT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_data < pkt_meta', bad access 1",
@@ -9658,6 +9669,7 @@ static struct bpf_test tests[] = {
 		},
 		.result = ACCEPT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_data >= pkt_meta', bad access 1",
@@ -9715,6 +9727,7 @@ static struct bpf_test tests[] = {
 		},
 		.result = ACCEPT,
 		.prog_type = BPF_PROG_TYPE_XDP,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"XDP pkt read, pkt_meta' <= pkt_data, bad access 1",
@@ -11646,6 +11659,7 @@ static struct bpf_test tests[] = {
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 		.result = ACCEPT,
 		.retval = 1,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"calls: pkt_ptr spill into caller stack 4",
@@ -11680,6 +11694,7 @@ static struct bpf_test tests[] = {
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 		.result = ACCEPT,
 		.retval = 1,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"calls: pkt_ptr spill into caller stack 5",
@@ -11825,6 +11840,7 @@ static struct bpf_test tests[] = {
 		},
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 		.result = ACCEPT,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"calls: pkt_ptr spill into caller stack 9",

[PATCH 4.19 47/58] selftests/bpf: add "any alignment" annotation for some tests

[Greg Kroah-Hartman]

From: Björn Töpel <bjorn.topel@gmail.com>

commit e2c6f50e48849298bed694de03cceb537d95cdc4 upstream

RISC-V does, in-general, not have "efficient unaligned access". When
testing the RISC-V BPF JIT, some selftests failed in the verification
due to misaligned access. Annotate these tests with the
F_NEEDS_EFFICIENT_UNALIGNED_ACCESS flag.

Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/bpf/test_verifier.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -963,6 +963,7 @@ static struct bpf_test tests[] = {
 		.errstr_unpriv = "attempt to corrupt spilled",
 		.errstr = "corrupted spill",
 		.result = REJECT,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"invalid src register in STX",
@@ -1777,6 +1778,7 @@ static struct bpf_test tests[] = {
 		.errstr = "invalid bpf_context access",
 		.result = REJECT,
 		.prog_type = BPF_PROG_TYPE_SK_MSG,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"invalid read past end of SK_MSG",
@@ -2176,6 +2178,7 @@ static struct bpf_test tests[] = {
 		},
 		.errstr = "invalid bpf_context access",
 		.result = REJECT,
+		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
 		"check skb->hash half load not permitted, unaligned 3",

[PATCH 4.19 48/58] selftests/bpf: Avoid running unprivileged tests with alignment requirements

[Greg Kroah-Hartman]

From: Björn Töpel <bjorn.topel@gmail.com>

commit c77b0589ca29ad1859fe7d7c1ecd63c0632379fa upstream

Some architectures have strict alignment requirements. In that case,
the BPF verifier detects if a program has unaligned accesses and
rejects them. A user can pass BPF_F_ANY_ALIGNMENT to a program to
override this check. That, however, will only work when a privileged
user loads a program. An unprivileged user loading a program with this
flag will be rejected prior entering the verifier.

Hence, it does not make sense to load unprivileged programs without
strict alignment when testing the verifier. This patch avoids exactly
that.

Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Luke Nelson <luke.r.nels@gmail.com>
Link: https://lore.kernel.org/bpf/20201118071640.83773-3-bjorn.topel@gmail.com
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/bpf/test_verifier.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -13045,6 +13045,19 @@ static void get_unpriv_disabled()
 
 static bool test_as_unpriv(struct bpf_test *test)
 {
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+	/* Some architectures have strict alignment requirements. In
+	 * that case, the BPF verifier detects if a program has
+	 * unaligned accesses and rejects them. A user can pass
+	 * BPF_F_ANY_ALIGNMENT to a program to override this
+	 * check. That, however, will only work when a privileged user
+	 * loads a program. An unprivileged user loading a program
+	 * with this flag will be rejected prior entering the
+	 * verifier.
+	 */
+	if (test->flags & F_NEEDS_EFFICIENT_UNALIGNED_ACCESS)
+		return false;
+#endif
 	return !test->prog_type ||
 	       test->prog_type == BPF_PROG_TYPE_SOCKET_FILTER ||
 	       test->prog_type == BPF_PROG_TYPE_CGROUP_SKB;

[PATCH 4.19 49/58] bnxt_en: Remove the setting of dev_port.

[Greg Kroah-Hartman]

From: Michael Chan <michael.chan@broadcom.com>

commit 1d86859fdf31a0d50cc82b5d0d6bfb5fe98f6c00 upstream.

The dev_port is meant to distinguish the network ports belonging to
the same PCI function.  Our devices only have one network port
associated with each PCI function and so we should not set it for
correctness.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -5252,7 +5252,6 @@ static int __bnxt_hwrm_func_qcaps(struct
 
 		pf->fw_fid = le16_to_cpu(resp->fid);
 		pf->port_id = le16_to_cpu(resp->port_id);
-		bp->dev->dev_port = pf->port_id;
 		memcpy(pf->mac_addr, resp->mac_address, ETH_ALEN);
 		pf->first_vf_id = le16_to_cpu(resp->first_vf_id);
 		pf->max_vfs = le16_to_cpu(resp->max_vfs);

[PATCH 4.19 50/58] perf/cgroups: Dont rotate events for cgroups unnecessarily

[Greg Kroah-Hartman]

From: Ian Rogers <irogers@google.com>

commit fd7d55172d1e2e501e6da0a5c1de25f06612dc2e upstream.

Currently perf_rotate_context assumes that if the context's nr_events !=
nr_active a rotation is necessary for perf event multiplexing. With
cgroups, nr_events is the total count of events for all cgroups and
nr_active will not include events in a cgroup other than the current
task's. This makes rotation appear necessary for cgroups when it is not.

Add a perf_event_context flag that is set when rotation is necessary.
Clear the flag during sched_out and set it when a flexible sched_in
fails due to resources.

Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/20190601082722.44543-1-irogers@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/perf_event.h |    5 +++++
 kernel/events/core.c       |   42 ++++++++++++++++++++++--------------------
 2 files changed, 27 insertions(+), 20 deletions(-)

--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -747,6 +747,11 @@ struct perf_event_context {
 	int				nr_stat;
 	int				nr_freq;
 	int				rotate_disable;
+	/*
+	 * Set when nr_events != nr_active, except tolerant to events not
+	 * necessary to be active due to scheduling constraints, such as cgroups.
+	 */
+	int				rotate_necessary;
 	atomic_t			refcount;
 	struct task_struct		*task;
 
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -2952,6 +2952,12 @@ static void ctx_sched_out(struct perf_ev
 	if (!ctx->nr_active || !(is_active & EVENT_ALL))
 		return;
 
+	/*
+	 * If we had been multiplexing, no rotations are necessary, now no events
+	 * are active.
+	 */
+	ctx->rotate_necessary = 0;
+
 	perf_pmu_disable(ctx->pmu);
 	if (is_active & EVENT_PINNED) {
 		list_for_each_entry_safe(event, tmp, &ctx->pinned_active, active_list)
@@ -3319,10 +3325,13 @@ static int flexible_sched_in(struct perf
 		return 0;
 
 	if (group_can_go_on(event, sid->cpuctx, sid->can_add_hw)) {
-		if (!group_sched_in(event, sid->cpuctx, sid->ctx))
-			list_add_tail(&event->active_list, &sid->ctx->flexible_active);
-		else
+		int ret = group_sched_in(event, sid->cpuctx, sid->ctx);
+		if (ret) {
 			sid->can_add_hw = 0;
+			sid->ctx->rotate_necessary = 1;
+			return 0;
+		}
+		list_add_tail(&event->active_list, &sid->ctx->flexible_active);
 	}
 
 	return 0;
@@ -3690,24 +3699,17 @@ ctx_first_active(struct perf_event_conte
 static bool perf_rotate_context(struct perf_cpu_context *cpuctx)
 {
 	struct perf_event *cpu_event = NULL, *task_event = NULL;
-	bool cpu_rotate = false, task_rotate = false;
-	struct perf_event_context *ctx = NULL;
+	struct perf_event_context *task_ctx = NULL;
+	int cpu_rotate, task_rotate;
 
 	/*
 	 * Since we run this from IRQ context, nobody can install new
 	 * events, thus the event count values are stable.
 	 */
 
-	if (cpuctx->ctx.nr_events) {
-		if (cpuctx->ctx.nr_events != cpuctx->ctx.nr_active)
-			cpu_rotate = true;
-	}
-
-	ctx = cpuctx->task_ctx;
-	if (ctx && ctx->nr_events) {
-		if (ctx->nr_events != ctx->nr_active)
-			task_rotate = true;
-	}
+	cpu_rotate = cpuctx->ctx.rotate_necessary;
+	task_ctx = cpuctx->task_ctx;
+	task_rotate = task_ctx ? task_ctx->rotate_necessary : 0;
 
 	if (!(cpu_rotate || task_rotate))
 		return false;
@@ -3716,7 +3718,7 @@ static bool perf_rotate_context(struct p
 	perf_pmu_disable(cpuctx->ctx.pmu);
 
 	if (task_rotate)
-		task_event = ctx_first_active(ctx);
+		task_event = ctx_first_active(task_ctx);
 	if (cpu_rotate)
 		cpu_event = ctx_first_active(&cpuctx->ctx);
 
@@ -3724,17 +3726,17 @@ static bool perf_rotate_context(struct p
 	 * As per the order given at ctx_resched() first 'pop' task flexible
 	 * and then, if needed CPU flexible.
 	 */
-	if (task_event || (ctx && cpu_event))
-		ctx_sched_out(ctx, cpuctx, EVENT_FLEXIBLE);
+	if (task_event || (task_ctx && cpu_event))
+		ctx_sched_out(task_ctx, cpuctx, EVENT_FLEXIBLE);
 	if (cpu_event)
 		cpu_ctx_sched_out(cpuctx, EVENT_FLEXIBLE);
 
 	if (task_event)
-		rotate_ctx(ctx, task_event);
+		rotate_ctx(task_ctx, task_event);
 	if (cpu_event)
 		rotate_ctx(&cpuctx->ctx, cpu_event);
 
-	perf_event_sched_in(cpuctx, ctx, current);
+	perf_event_sched_in(cpuctx, task_ctx, current);
 
 	perf_pmu_enable(cpuctx->ctx.pmu);
 	perf_ctx_unlock(cpuctx, cpuctx->task_ctx);

[PATCH 4.19 51/58] perf/core: Fix corner case in perf_rotate_context()

[Greg Kroah-Hartman]

From: Song Liu <songliubraving@fb.com>

commit 7fa343b7fdc4f351de4e3f28d5c285937dd1f42f upstream.

In perf_rotate_context(), when the first cpu flexible event fail to
schedule, cpu_rotate is 1, while cpu_event is NULL. Since cpu_event is
NULL, perf_rotate_context will _NOT_ call cpu_ctx_sched_out(), thus
cpuctx->ctx.is_active will have EVENT_FLEXIBLE set. Then, the next
perf_event_sched_in() will skip all cpu flexible events because of the
EVENT_FLEXIBLE bit.

In the next call of perf_rotate_context(), cpu_rotate stays 1, and
cpu_event stays NULL, so this process repeats. The end result is, flexible
events on this cpu will not be scheduled (until another event being added
to the cpuctx).

Here is an easy repro of this issue. On Intel CPUs, where ref-cycles
could only use one counter, run one pinned event for ref-cycles, one
flexible event for ref-cycles, and one flexible event for cycles. The
flexible ref-cycles is never scheduled, which is expected. However,
because of this issue, the cycles event is never scheduled either.

 $ perf stat -e ref-cycles:D,ref-cycles,cycles -C 5 -I 1000

           time             counts unit events
    1.000152973         15,412,480      ref-cycles:D
    1.000152973      <not counted>      ref-cycles     (0.00%)
    1.000152973      <not counted>      cycles         (0.00%)
    2.000486957         18,263,120      ref-cycles:D
    2.000486957      <not counted>      ref-cycles     (0.00%)
    2.000486957      <not counted>      cycles         (0.00%)

To fix this, when the flexible_active list is empty, try rotate the
first event in the flexible_groups. Also, rename ctx_first_active() to
ctx_event_to_rotate(), which is more accurate.

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <kernel-team@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 8d5bce0c37fa ("perf/core: Optimize perf_rotate_context() event scheduling")
Link: https://lkml.kernel.org/r/20191008165949.920548-1-songliubraving@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/events/core.c |   22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -3689,11 +3689,23 @@ static void rotate_ctx(struct perf_event
 	perf_event_groups_insert(&ctx->flexible_groups, event);
 }
 
+/* pick an event from the flexible_groups to rotate */
 static inline struct perf_event *
-ctx_first_active(struct perf_event_context *ctx)
+ctx_event_to_rotate(struct perf_event_context *ctx)
 {
-	return list_first_entry_or_null(&ctx->flexible_active,
-					struct perf_event, active_list);
+	struct perf_event *event;
+
+	/* pick the first active flexible event */
+	event = list_first_entry_or_null(&ctx->flexible_active,
+					 struct perf_event, active_list);
+
+	/* if no active flexible event, pick the first event */
+	if (!event) {
+		event = rb_entry_safe(rb_first(&ctx->flexible_groups.tree),
+				      typeof(*event), group_node);
+	}
+
+	return event;
 }
 
 static bool perf_rotate_context(struct perf_cpu_context *cpuctx)
@@ -3718,9 +3730,9 @@ static bool perf_rotate_context(struct p
 	perf_pmu_disable(cpuctx->ctx.pmu);
 
 	if (task_rotate)
-		task_event = ctx_first_active(task_ctx);
+		task_event = ctx_event_to_rotate(task_ctx);
 	if (cpu_rotate)
-		cpu_event = ctx_first_active(&cpuctx->ctx);
+		cpu_event = ctx_event_to_rotate(&cpuctx->ctx);
 
 	/*
 	 * As per the order given at ctx_resched() first 'pop' task flexible

[PATCH 4.19 52/58] btrfs: fix unmountable seed device after fstrim

[Greg Kroah-Hartman]

From: Anand Jain <anand.jain@oracle.com>

commit 5e753a817b2d5991dfe8a801b7b1e8e79a1c5a20 upstream.

The following test case reproduces an issue of wrongly freeing in-use
blocks on the readonly seed device when fstrim is called on the rw sprout
device. As shown below.

Create a seed device and add a sprout device to it:

  $ mkfs.btrfs -fq -dsingle -msingle /dev/loop0
  $ btrfstune -S 1 /dev/loop0
  $ mount /dev/loop0 /btrfs
  $ btrfs dev add -f /dev/loop1 /btrfs
  BTRFS info (device loop0): relocating block group 290455552 flags system
  BTRFS info (device loop0): relocating block group 1048576 flags system
  BTRFS info (device loop0): disk added /dev/loop1
  $ umount /btrfs

Mount the sprout device and run fstrim:

  $ mount /dev/loop1 /btrfs
  $ fstrim /btrfs
  $ umount /btrfs

Now try to mount the seed device, and it fails:

  $ mount /dev/loop0 /btrfs
  mount: /btrfs: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error.

Block 5292032 is missing on the readonly seed device:

 $ dmesg -kt | tail
 <snip>
 BTRFS error (device loop0): bad tree block start, want 5292032 have 0
 BTRFS warning (device loop0): couldn't read-tree root
 BTRFS error (device loop0): open_ctree failed

>From the dump-tree of the seed device (taken before the fstrim). Block
5292032 belonged to the block group starting at 5242880:

  $ btrfs inspect dump-tree -e /dev/loop0 | grep -A1 BLOCK_GROUP
  <snip>
  item 3 key (5242880 BLOCK_GROUP_ITEM 8388608) itemoff 16169 itemsize 24
  	block group used 114688 chunk_objectid 256 flags METADATA
  <snip>

>From the dump-tree of the sprout device (taken before the fstrim).
fstrim used block-group 5242880 to find the related free space to free:

  $ btrfs inspect dump-tree -e /dev/loop1 | grep -A1 BLOCK_GROUP
  <snip>
  item 1 key (5242880 BLOCK_GROUP_ITEM 8388608) itemoff 16226 itemsize 24
  	block group used 32768 chunk_objectid 256 flags METADATA
  <snip>

BPF kernel tracing the fstrim command finds the missing block 5292032
within the range of the discarded blocks as below:

  kprobe:btrfs_discard_extent {
  	printf("freeing start %llu end %llu num_bytes %llu:\n",
  		arg1, arg1+arg2, arg2);
  }

  freeing start 5259264 end 5406720 num_bytes 147456
  <snip>

Fix this by avoiding the discard command to the readonly seed device.

Reported-by: Chris Murphy <lists@colorremedies.com>
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/extent-tree.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -1984,16 +1984,20 @@ int btrfs_discard_extent(struct btrfs_fs
 		for (i = 0; i < bbio->num_stripes; i++, stripe++) {
 			u64 bytes;
 			struct request_queue *req_q;
+			struct btrfs_device *device = stripe->dev;
 
-			if (!stripe->dev->bdev) {
+			if (!device->bdev) {
 				ASSERT(btrfs_test_opt(fs_info, DEGRADED));
 				continue;
 			}
-			req_q = bdev_get_queue(stripe->dev->bdev);
+			req_q = bdev_get_queue(device->bdev);
 			if (!blk_queue_discard(req_q))
 				continue;
 
-			ret = btrfs_issue_discard(stripe->dev->bdev,
+			if (!test_bit(BTRFS_DEV_STATE_WRITEABLE, &device->dev_state))
+				continue;
+
+			ret = btrfs_issue_discard(device->bdev,
 						  stripe->physical,
 						  stripe->length,
 						  &bytes);

[PATCH 4.19 53/58] KVM: SVM: Truncate GPR value for DR and CR accesses in !64-bit mode

[Greg Kroah-Hartman]

From: Sean Christopherson <seanjc@google.com>

commit 0884335a2e653b8a045083aa1d57ce74269ac81d upstream.

Drop bits 63:32 on loads/stores to/from DRs and CRs when the vCPU is not
in 64-bit mode.  The APM states bits 63:32 are dropped for both DRs and
CRs:

  In 64-bit mode, the operand size is fixed at 64 bits without the need
  for a REX prefix. In non-64-bit mode, the operand size is fixed at 32
  bits and the upper 32 bits of the destination are forced to 0.

Fixes: 7ff76d58a9dc ("KVM: SVM: enhance MOV CR intercept handler")
Fixes: cae3797a4639 ("KVM: SVM: enhance mov DR intercept handler")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[sudip: manual backport to old file]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/svm.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -4033,7 +4033,7 @@ static int cr_interception(struct vcpu_s
 	err = 0;
 	if (cr >= 16) { /* mov to cr */
 		cr -= 16;
-		val = kvm_register_read(&svm->vcpu, reg);
+		val = kvm_register_readl(&svm->vcpu, reg);
 		switch (cr) {
 		case 0:
 			if (!check_selective_cr0_intercepted(svm, val))
@@ -4078,7 +4078,7 @@ static int cr_interception(struct vcpu_s
 			kvm_queue_exception(&svm->vcpu, UD_VECTOR);
 			return 1;
 		}
-		kvm_register_write(&svm->vcpu, reg, val);
+		kvm_register_writel(&svm->vcpu, reg, val);
 	}
 	return kvm_complete_insn_gp(&svm->vcpu, err);
 }
@@ -4108,13 +4108,13 @@ static int dr_interception(struct vcpu_s
 	if (dr >= 16) { /* mov to DRn */
 		if (!kvm_require_dr(&svm->vcpu, dr - 16))
 			return 1;
-		val = kvm_register_read(&svm->vcpu, reg);
+		val = kvm_register_readl(&svm->vcpu, reg);
 		kvm_set_dr(&svm->vcpu, dr - 16, val);
 	} else {
 		if (!kvm_require_dr(&svm->vcpu, dr))
 			return 1;
 		kvm_get_dr(&svm->vcpu, dr, &val);
-		kvm_register_write(&svm->vcpu, reg, val);
+		kvm_register_writel(&svm->vcpu, reg, val);
 	}
 
 	return kvm_skip_emulated_instruction(&svm->vcpu);

[PATCH 4.19 54/58] KVM: arm64: Fix debug register indexing

[Greg Kroah-Hartman]

From: Marc Zyngier <maz@kernel.org>

commit cb853ded1d25e5b026ce115dbcde69e3d7e2e831 upstream.

Commit 03fdfb2690099 ("KVM: arm64: Don't write junk to sysregs on
reset") flipped the register number to 0 for all the debug registers
in the sysreg table, hereby indicating that these registers live
in a separate shadow structure.

However, the author of this patch failed to realise that all the
accessors are using that particular index instead of the register
encoding, resulting in all the registers hitting index 0. Not quite
a valid implementation of the architecture...

Address the issue by fixing all the accessors to use the CRm field
of the encoding, which contains the debug register index.

Fixes: 03fdfb2690099 ("KVM: arm64: Don't write junk to sysregs on reset")
Reported-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kvm/sys_regs.c |   42 +++++++++++++++++++++---------------------
 1 file changed, 21 insertions(+), 21 deletions(-)

--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -426,14 +426,14 @@ static bool trap_bvr(struct kvm_vcpu *vc
 		     struct sys_reg_params *p,
 		     const struct sys_reg_desc *rd)
 {
-	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->reg];
+	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->CRm];
 
 	if (p->is_write)
 		reg_to_dbg(vcpu, p, dbg_reg);
 	else
 		dbg_to_reg(vcpu, p, dbg_reg);
 
-	trace_trap_reg(__func__, rd->reg, p->is_write, *dbg_reg);
+	trace_trap_reg(__func__, rd->CRm, p->is_write, *dbg_reg);
 
 	return true;
 }
@@ -441,7 +441,7 @@ static bool trap_bvr(struct kvm_vcpu *vc
 static int set_bvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 		const struct kvm_one_reg *reg, void __user *uaddr)
 {
-	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->reg];
+	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->CRm];
 
 	if (copy_from_user(r, uaddr, KVM_REG_SIZE(reg->id)) != 0)
 		return -EFAULT;
@@ -451,7 +451,7 @@ static int set_bvr(struct kvm_vcpu *vcpu
 static int get_bvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 	const struct kvm_one_reg *reg, void __user *uaddr)
 {
-	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->reg];
+	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->CRm];
 
 	if (copy_to_user(uaddr, r, KVM_REG_SIZE(reg->id)) != 0)
 		return -EFAULT;
@@ -461,21 +461,21 @@ static int get_bvr(struct kvm_vcpu *vcpu
 static void reset_bvr(struct kvm_vcpu *vcpu,
 		      const struct sys_reg_desc *rd)
 {
-	vcpu->arch.vcpu_debug_state.dbg_bvr[rd->reg] = rd->val;
+	vcpu->arch.vcpu_debug_state.dbg_bvr[rd->CRm] = rd->val;
 }
 
 static bool trap_bcr(struct kvm_vcpu *vcpu,
 		     struct sys_reg_params *p,
 		     const struct sys_reg_desc *rd)
 {
-	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_bcr[rd->reg];
+	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_bcr[rd->CRm];
 
 	if (p->is_write)
 		reg_to_dbg(vcpu, p, dbg_reg);
 	else
 		dbg_to_reg(vcpu, p, dbg_reg);
 
-	trace_trap_reg(__func__, rd->reg, p->is_write, *dbg_reg);
+	trace_trap_reg(__func__, rd->CRm, p->is_write, *dbg_reg);
 
 	return true;
 }
@@ -483,7 +483,7 @@ static bool trap_bcr(struct kvm_vcpu *vc
 static int set_bcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 		const struct kvm_one_reg *reg, void __user *uaddr)
 {
-	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bcr[rd->reg];
+	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bcr[rd->CRm];
 
 	if (copy_from_user(r, uaddr, KVM_REG_SIZE(reg->id)) != 0)
 		return -EFAULT;
@@ -494,7 +494,7 @@ static int set_bcr(struct kvm_vcpu *vcpu
 static int get_bcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 	const struct kvm_one_reg *reg, void __user *uaddr)
 {
-	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bcr[rd->reg];
+	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bcr[rd->CRm];
 
 	if (copy_to_user(uaddr, r, KVM_REG_SIZE(reg->id)) != 0)
 		return -EFAULT;
@@ -504,22 +504,22 @@ static int get_bcr(struct kvm_vcpu *vcpu
 static void reset_bcr(struct kvm_vcpu *vcpu,
 		      const struct sys_reg_desc *rd)
 {
-	vcpu->arch.vcpu_debug_state.dbg_bcr[rd->reg] = rd->val;
+	vcpu->arch.vcpu_debug_state.dbg_bcr[rd->CRm] = rd->val;
 }
 
 static bool trap_wvr(struct kvm_vcpu *vcpu,
 		     struct sys_reg_params *p,
 		     const struct sys_reg_desc *rd)
 {
-	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_wvr[rd->reg];
+	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm];
 
 	if (p->is_write)
 		reg_to_dbg(vcpu, p, dbg_reg);
 	else
 		dbg_to_reg(vcpu, p, dbg_reg);
 
-	trace_trap_reg(__func__, rd->reg, p->is_write,
-		vcpu->arch.vcpu_debug_state.dbg_wvr[rd->reg]);
+	trace_trap_reg(__func__, rd->CRm, p->is_write,
+		vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm]);
 
 	return true;
 }
@@ -527,7 +527,7 @@ static bool trap_wvr(struct kvm_vcpu *vc
 static int set_wvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 		const struct kvm_one_reg *reg, void __user *uaddr)
 {
-	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wvr[rd->reg];
+	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm];
 
 	if (copy_from_user(r, uaddr, KVM_REG_SIZE(reg->id)) != 0)
 		return -EFAULT;
@@ -537,7 +537,7 @@ static int set_wvr(struct kvm_vcpu *vcpu
 static int get_wvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 	const struct kvm_one_reg *reg, void __user *uaddr)
 {
-	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wvr[rd->reg];
+	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm];
 
 	if (copy_to_user(uaddr, r, KVM_REG_SIZE(reg->id)) != 0)
 		return -EFAULT;
@@ -547,21 +547,21 @@ static int get_wvr(struct kvm_vcpu *vcpu
 static void reset_wvr(struct kvm_vcpu *vcpu,
 		      const struct sys_reg_desc *rd)
 {
-	vcpu->arch.vcpu_debug_state.dbg_wvr[rd->reg] = rd->val;
+	vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm] = rd->val;
 }
 
 static bool trap_wcr(struct kvm_vcpu *vcpu,
 		     struct sys_reg_params *p,
 		     const struct sys_reg_desc *rd)
 {
-	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_wcr[rd->reg];
+	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_wcr[rd->CRm];
 
 	if (p->is_write)
 		reg_to_dbg(vcpu, p, dbg_reg);
 	else
 		dbg_to_reg(vcpu, p, dbg_reg);
 
-	trace_trap_reg(__func__, rd->reg, p->is_write, *dbg_reg);
+	trace_trap_reg(__func__, rd->CRm, p->is_write, *dbg_reg);
 
 	return true;
 }
@@ -569,7 +569,7 @@ static bool trap_wcr(struct kvm_vcpu *vc
 static int set_wcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 		const struct kvm_one_reg *reg, void __user *uaddr)
 {
-	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wcr[rd->reg];
+	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wcr[rd->CRm];
 
 	if (copy_from_user(r, uaddr, KVM_REG_SIZE(reg->id)) != 0)
 		return -EFAULT;
@@ -579,7 +579,7 @@ static int set_wcr(struct kvm_vcpu *vcpu
 static int get_wcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 	const struct kvm_one_reg *reg, void __user *uaddr)
 {
-	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wcr[rd->reg];
+	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wcr[rd->CRm];
 
 	if (copy_to_user(uaddr, r, KVM_REG_SIZE(reg->id)) != 0)
 		return -EFAULT;
@@ -589,7 +589,7 @@ static int get_wcr(struct kvm_vcpu *vcpu
 static void reset_wcr(struct kvm_vcpu *vcpu,
 		      const struct sys_reg_desc *rd)
 {
-	vcpu->arch.vcpu_debug_state.dbg_wcr[rd->reg] = rd->val;
+	vcpu->arch.vcpu_debug_state.dbg_wcr[rd->CRm] = rd->val;
 }
 
 static void reset_amair_el1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)

[PATCH 4.19 55/58] ACPI: probe ECDT before loading AML tables regardless of module-level code flag

[Greg Kroah-Hartman]

From: Erik Schmauss <erik.schmauss@intel.com>

commit d737f333b211361b6e239fc753b84c3be2634aaa upstream.

It was discovered that AML tables were loaded before or after the
ECDT depending on acpi_gbl_execute_tables_as_methods. According to
the ACPI spec, the ECDT should be loaded before the namespace is
populated by loading AML tables (DSDT and SSDT). Since the ECDT
should be loaded early in the boot process, this change moves the
ECDT probing to acpi_early_init.

Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Laurențiu Păncescu <lpancescu@gmail.com>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/bus.c |   44 ++++++++++++++++----------------------------
 1 file changed, 16 insertions(+), 28 deletions(-)

--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -1054,15 +1054,17 @@ void __init acpi_early_init(void)
 		goto error0;
 	}
 
-	if (!acpi_gbl_execute_tables_as_methods &&
-	    acpi_gbl_group_module_level_code) {
-		status = acpi_load_tables();
-		if (ACPI_FAILURE(status)) {
-			printk(KERN_ERR PREFIX
-			       "Unable to load the System Description Tables\n");
-			goto error0;
-		}
-	}
+	/*
+	 * ACPI 2.0 requires the EC driver to be loaded and work before
+	 * the EC device is found in the namespace (i.e. before
+	 * acpi_load_tables() is called).
+	 *
+	 * This is accomplished by looking for the ECDT table, and getting
+	 * the EC parameters out of that.
+	 *
+	 * Ignore the result. Not having an ECDT is not fatal.
+	 */
+	status = acpi_ec_ecdt_probe();
 
 #ifdef CONFIG_X86
 	if (!acpi_ioapic) {
@@ -1133,25 +1135,11 @@ static int __init acpi_bus_init(void)
 
 	acpi_os_initialize1();
 
-	/*
-	 * ACPI 2.0 requires the EC driver to be loaded and work before
-	 * the EC device is found in the namespace (i.e. before
-	 * acpi_load_tables() is called).
-	 *
-	 * This is accomplished by looking for the ECDT table, and getting
-	 * the EC parameters out of that.
-	 */
-	status = acpi_ec_ecdt_probe();
-	/* Ignore result. Not having an ECDT is not fatal. */
-
-	if (acpi_gbl_execute_tables_as_methods ||
-	    !acpi_gbl_group_module_level_code) {
-		status = acpi_load_tables();
-		if (ACPI_FAILURE(status)) {
-			printk(KERN_ERR PREFIX
-			       "Unable to load the System Description Tables\n");
-			goto error1;
-		}
+	status = acpi_load_tables();
+	if (ACPI_FAILURE(status)) {
+		printk(KERN_ERR PREFIX
+		       "Unable to load the System Description Tables\n");
+		goto error1;
 	}
 
 	status = acpi_enable_subsystem(ACPI_NO_ACPI_ENABLE);

[PATCH 4.19 56/58] ACPI: EC: Look for ECDT EC after calling acpi_load_tables()

[Greg Kroah-Hartman]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

commit b1c0330823fe842dbb34641f1410f0afa51c29d3 upstream.

Some systems have had functional issues since commit 5a8361f7ecce
(ACPICA: Integrate package handling with module-level code) that,
among other things, changed the initial values of the
acpi_gbl_group_module_level_code and acpi_gbl_parse_table_as_term_list
global flags in ACPICA which implicitly caused acpi_ec_ecdt_probe() to
be called before acpi_load_tables() on the vast majority of platforms.

Namely, before commit 5a8361f7ecce, acpi_load_tables() was called from
acpi_early_init() if acpi_gbl_parse_table_as_term_list was FALSE and
acpi_gbl_group_module_level_code was TRUE, which almost always was
the case as FALSE and TRUE were their initial values, respectively.
The acpi_gbl_parse_table_as_term_list value would be changed to TRUE
for a couple of platforms in acpi_quirks_dmi_table[], but it remained
FALSE in the vast majority of cases.

After commit 5a8361f7ecce, the initial values of the two flags have
been reversed, so in effect acpi_load_tables() has not been called
from acpi_early_init() any more.  That, in turn, affects
acpi_ec_ecdt_probe() which is invoked before acpi_load_tables() now
and it is not possible to evaluate the _REG method for the EC address
space handler installed by it.  That effectively causes the EC address
space to be inaccessible to AML on platforms with an ECDT matching the
EC device definition in the DSDT and functional problems ensue in
there.

Because the default behavior before commit 5a8361f7ecce was to call
acpi_ec_ecdt_probe() after acpi_load_tables(), it should be safe to
do that again.  Moreover, the EC address space handler installed by
acpi_ec_ecdt_probe() is only needed for AML to be able to access the
EC address space and the only AML that can run during acpi_load_tables()
is module-level code which only is allowed to access address spaces
with default handlers (memory, I/O and PCI config space).

For this reason, move the acpi_ec_ecdt_probe() invocation back to
acpi_bus_init(), from where it was taken away by commit d737f333b211
(ACPI: probe ECDT before loading AML tables regardless of module-level
code flag), and put it after the invocation of acpi_load_tables() to
restore the original code ordering from before commit 5a8361f7ecce.

Fixes: 5a8361f7ecce ("ACPICA: Integrate package handling with module-level code")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199981
Reported-by: step-ali <sunmooon15@gmail.com>
Reported-by: Charles Stanhope <charles.stanhope@gmail.com>
Tested-by: Charles Stanhope <charles.stanhope@gmail.com>
Reported-by: Paulo Nascimento <paulo.ulusu@googlemail.com>
Reported-by: David Purton <dcpurton@marshwiggle.net>
Reported-by: Adam Harvey <adam@adamharvey.name>
Reported-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Jean-Marc Lenoir <archlinux@jihemel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Laurențiu Păncescu <lpancescu@gmail.com>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/bus.c |   24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -1054,18 +1054,6 @@ void __init acpi_early_init(void)
 		goto error0;
 	}
 
-	/*
-	 * ACPI 2.0 requires the EC driver to be loaded and work before
-	 * the EC device is found in the namespace (i.e. before
-	 * acpi_load_tables() is called).
-	 *
-	 * This is accomplished by looking for the ECDT table, and getting
-	 * the EC parameters out of that.
-	 *
-	 * Ignore the result. Not having an ECDT is not fatal.
-	 */
-	status = acpi_ec_ecdt_probe();
-
 #ifdef CONFIG_X86
 	if (!acpi_ioapic) {
 		/* compatible (0) means level (3) */
@@ -1142,6 +1130,18 @@ static int __init acpi_bus_init(void)
 		goto error1;
 	}
 
+	/*
+	 * ACPI 2.0 requires the EC driver to be loaded and work before the EC
+	 * device is found in the namespace.
+	 *
+	 * This is accomplished by looking for the ECDT table and getting the EC
+	 * parameters out of that.
+	 *
+	 * Do that before calling acpi_initialize_objects() which may trigger EC
+	 * address space accesses.
+	 */
+	acpi_ec_ecdt_probe();
+
 	status = acpi_enable_subsystem(ACPI_NO_ACPI_ENABLE);
 	if (ACPI_FAILURE(status)) {
 		printk(KERN_ERR PREFIX

[PATCH 4.19 57/58] sched/fair: Optimize select_idle_cpu

[Greg Kroah-Hartman]

From: Cheng Jian <cj.chengjian@huawei.com>

commit 60588bfa223ff675b95f866249f90616613fbe31 upstream.

select_idle_cpu() will scan the LLC domain for idle CPUs,
it's always expensive. so the next commit :

	1ad3aaf3fcd2 ("sched/core: Implement new approach to scale select_idle_cpu()")

introduces a way to limit how many CPUs we scan.

But it consume some CPUs out of 'nr' that are not allowed
for the task and thus waste our attempts. The function
always return nr_cpumask_bits, and we can't find a CPU
which our task is allowed to run.

Cpumask may be too big, similar to select_idle_core(), use
per_cpu_ptr 'select_idle_mask' to prevent stack overflow.

Fixes: 1ad3aaf3fcd2 ("sched/core: Implement new approach to scale select_idle_cpu()")
Signed-off-by: Cheng Jian <cj.chengjian@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20191213024530.28052-1-cj.chengjian@huawei.com
Signed-off-by: Yang Wei <yang.wei@linux.alibaba.com>
Tested-by: Yang Wei <yang.wei@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/sched/fair.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -6154,6 +6154,7 @@ static inline int select_idle_smt(struct
  */
 static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, int target)
 {
+	struct cpumask *cpus = this_cpu_cpumask_var_ptr(select_idle_mask);
 	struct sched_domain *this_sd;
 	u64 avg_cost, avg_idle;
 	u64 time, cost;
@@ -6184,11 +6185,11 @@ static int select_idle_cpu(struct task_s
 
 	time = local_clock();
 
-	for_each_cpu_wrap(cpu, sched_domain_span(sd), target) {
+	cpumask_and(cpus, sched_domain_span(sd), &p->cpus_allowed);
+
+	for_each_cpu_wrap(cpu, cpus, target) {
 		if (!--nr)
 			return -1;
-		if (!cpumask_test_cpu(cpu, &p->cpus_allowed))
-			continue;
 		if (available_idle_cpu(cpu))
 			break;
 	}

[PATCH 4.19 58/58] xen-pciback: redo VF placement in the virtual topology

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

The commit referenced below was incomplete: It merely affected what
would get written to the vdev-<N> xenstore node. The guest would still
find the function at the original function number as long as
__xen_pcibk_get_pci_dev() wouldn't be in sync. The same goes for AER wrt
__xen_pcibk_get_pcifront_dev().

Undo overriding the function to zero and instead make sure that VFs at
function zero remain alone in their slot. This has the added benefit of
improving overall capacity, considering that there's only a total of 32
slots available right now (PCI segment and bus can both only ever be
zero at present).

This is upstream commit 4ba50e7c423c29639878c00573288869aa627068.

Fixes: 8a5248fe10b1 ("xen PV passthru: assign SR-IOV virtual functions to 
separate virtual slots")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/8def783b-404c-3452-196d-3f3fd4d72c9e@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/xen/xen-pciback/vpci.c |   14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

--- a/drivers/xen/xen-pciback/vpci.c
+++ b/drivers/xen/xen-pciback/vpci.c
@@ -69,7 +69,7 @@ static int __xen_pcibk_add_pci_dev(struc
 				   struct pci_dev *dev, int devid,
 				   publish_pci_dev_cb publish_cb)
 {
-	int err = 0, slot, func = -1;
+	int err = 0, slot, func = PCI_FUNC(dev->devfn);
 	struct pci_dev_entry *t, *dev_entry;
 	struct vpci_dev_data *vpci_dev = pdev->pci_dev_data;
 
@@ -94,23 +94,26 @@ static int __xen_pcibk_add_pci_dev(struc
 
 	/*
 	 * Keep multi-function devices together on the virtual PCI bus, except
-	 * virtual functions.
+	 * that we want to keep virtual functions at func 0 on their own. They
+	 * aren't multi-function devices and hence their presence at func 0
+	 * may cause guests to not scan the other functions.
 	 */
-	if (!dev->is_virtfn) {
+	if (!dev->is_virtfn || func) {
 		for (slot = 0; slot < PCI_SLOT_MAX; slot++) {
 			if (list_empty(&vpci_dev->dev_list[slot]))
 				continue;
 
 			t = list_entry(list_first(&vpci_dev->dev_list[slot]),
 				       struct pci_dev_entry, list);
+			if (t->dev->is_virtfn && !PCI_FUNC(t->dev->devfn))
+				continue;
 
 			if (match_slot(dev, t->dev)) {
 				pr_info("vpci: %s: assign to virtual slot %d func %d\n",
 					pci_name(dev), slot,
-					PCI_FUNC(dev->devfn));
+					func);
 				list_add_tail(&dev_entry->list,
 					      &vpci_dev->dev_list[slot]);
-				func = PCI_FUNC(dev->devfn);
 				goto unlock;
 			}
 		}
@@ -123,7 +126,6 @@ static int __xen_pcibk_add_pci_dev(struc
 				pci_name(dev), slot);
 			list_add_tail(&dev_entry->list,
 				      &vpci_dev->dev_list[slot]);
-			func = dev->is_virtfn ? 0 : PCI_FUNC(dev->devfn);
 			goto unlock;
 		}
 	}

Re: [PATCH 4.19 00/58] 4.19.194-rc1 review

[Naresh Kamboju]

On Wed, 9 Jun 2021 at 00:02, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.194 release.
> There are 58 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 10 Jun 2021 17:59:18 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.194-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

The following patch caused arm dtb build failure on 4.19

> Marek Vasut <marex@denx.de>
>     ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators

make --silent --keep-going --jobs=8
O=/home/tuxbuild/.cache/tuxmake/builds/current ARCH=arm
CROSS_COMPILE=arm-linux-gnueabihf- 'CC=sccache
arm-linux-gnueabihf-gcc' 'HOSTCC=sccache gcc'
Error: /builds/linux/arch/arm/boot/dts/imx6q-dhcom-som.dtsi:414.1-12
Label or path reg_vdd1p1 not found
Error: /builds/linux/arch/arm/boot/dts/imx6q-dhcom-som.dtsi:418.1-12
Label or path reg_vdd2p5 not found
FATAL ERROR: Syntax error parsing input tree
make[2]: *** [scripts/Makefile.lib:294:
arch/arm/boot/dts/imx6q-dhcom-pdk2.dtb] Error 1

Reported-by:  Linux Kernel Functional Testing <lkft@linaro.org>

build url:
https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc/-/jobs/1328891505#L477

Config:
https://builds.tuxbuild.com/1tg0YjTz4ow5CkHv0bzTc05pVs5/config

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.19 00/58] 4.19.194-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1240 bytes --]

Hi!

> > This is the start of the stable review cycle for the 4.19.194 release.
> > There are 58 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
...
> > Marek Vasut <marex@denx.de>
> >     ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators
> 
> make --silent --keep-going --jobs=8
> O=/home/tuxbuild/.cache/tuxmake/builds/current ARCH=arm
> CROSS_COMPILE=arm-linux-gnueabihf- 'CC=sccache
> arm-linux-gnueabihf-gcc' 'HOSTCC=sccache gcc'
> Error: /builds/linux/arch/arm/boot/dts/imx6q-dhcom-som.dtsi:414.1-12
> Label or path reg_vdd1p1 not found
> Error: /builds/linux/arch/arm/boot/dts/imx6q-dhcom-som.dtsi:418.1-12
> Label or path reg_vdd2p5 not found
> FATAL ERROR: Syntax error parsing input tree
> make[2]: *** [scripts/Makefile.lib:294:
> arch/arm/boot/dts/imx6q-dhcom-pdk2.dtb] Error 1

For the record, we see same build error in our testing:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/jobs/1328869295

Best regards,
									Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH 4.19 00/58] 4.19.194-rc1 review

[Greg Kroah-Hartman]

On Wed, Jun 09, 2021 at 12:41:55AM +0200, Pavel Machek wrote:
> Hi!
> 
> > > This is the start of the stable review cycle for the 4.19.194 release.
> > > There are 58 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> ...
> > > Marek Vasut <marex@denx.de>
> > >     ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators
> > 
> > make --silent --keep-going --jobs=8
> > O=/home/tuxbuild/.cache/tuxmake/builds/current ARCH=arm
> > CROSS_COMPILE=arm-linux-gnueabihf- 'CC=sccache
> > arm-linux-gnueabihf-gcc' 'HOSTCC=sccache gcc'
> > Error: /builds/linux/arch/arm/boot/dts/imx6q-dhcom-som.dtsi:414.1-12
> > Label or path reg_vdd1p1 not found
> > Error: /builds/linux/arch/arm/boot/dts/imx6q-dhcom-som.dtsi:418.1-12
> > Label or path reg_vdd2p5 not found
> > FATAL ERROR: Syntax error parsing input tree
> > make[2]: *** [scripts/Makefile.lib:294:
> > arch/arm/boot/dts/imx6q-dhcom-pdk2.dtb] Error 1
> 
> For the record, we see same build error in our testing:
> 
> https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/jobs/1328869295

Will fix this and push out a -rc2.

thanks,

greg k-h

Re: [PATCH 4.19 00/58] 4.19.194-rc1 review

[Marek Vasut]

On 6/9/21 8:25 AM, Greg Kroah-Hartman wrote:
> On Wed, Jun 09, 2021 at 12:41:55AM +0200, Pavel Machek wrote:
>> Hi!
>>
>>>> This is the start of the stable review cycle for the 4.19.194 release.
>>>> There are 58 patches in this series, all will be posted as a response
>>>> to this one.  If anyone has any issues with these being applied, please
>>>> let me know.
>> ...
>>>> Marek Vasut <marex@denx.de>
>>>>      ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators
>>>
>>> make --silent --keep-going --jobs=8
>>> O=/home/tuxbuild/.cache/tuxmake/builds/current ARCH=arm
>>> CROSS_COMPILE=arm-linux-gnueabihf- 'CC=sccache
>>> arm-linux-gnueabihf-gcc' 'HOSTCC=sccache gcc'
>>> Error: /builds/linux/arch/arm/boot/dts/imx6q-dhcom-som.dtsi:414.1-12
>>> Label or path reg_vdd1p1 not found
>>> Error: /builds/linux/arch/arm/boot/dts/imx6q-dhcom-som.dtsi:418.1-12
>>> Label or path reg_vdd2p5 not found
>>> FATAL ERROR: Syntax error parsing input tree
>>> make[2]: *** [scripts/Makefile.lib:294:
>>> arch/arm/boot/dts/imx6q-dhcom-pdk2.dtb] Error 1
>>
>> For the record, we see same build error in our testing:
>>
>> https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/jobs/1328869295
> 
> Will fix this and push out a -rc2.

I suspect for 4.19.y , you will need to pick the following as 
dependency. It looks like board DT patch, but it also adds the missing 
labels to imx6qdl.dtsi

93385546ba36 ("ARM: dts: imx6qdl-sabresd: Assign corresponding power 
supply for LDOs")

Re: [PATCH 4.19 00/58] 4.19.194-rc1 review

[Greg Kroah-Hartman]

On Thu, Jun 10, 2021 at 01:40:14PM +0200, Marek Vasut wrote:
> On 6/9/21 8:25 AM, Greg Kroah-Hartman wrote:
> > On Wed, Jun 09, 2021 at 12:41:55AM +0200, Pavel Machek wrote:
> > > Hi!
> > > 
> > > > > This is the start of the stable review cycle for the 4.19.194 release.
> > > > > There are 58 patches in this series, all will be posted as a response
> > > > > to this one.  If anyone has any issues with these being applied, please
> > > > > let me know.
> > > ...
> > > > > Marek Vasut <marex@denx.de>
> > > > >      ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators
> > > > 
> > > > make --silent --keep-going --jobs=8
> > > > O=/home/tuxbuild/.cache/tuxmake/builds/current ARCH=arm
> > > > CROSS_COMPILE=arm-linux-gnueabihf- 'CC=sccache
> > > > arm-linux-gnueabihf-gcc' 'HOSTCC=sccache gcc'
> > > > Error: /builds/linux/arch/arm/boot/dts/imx6q-dhcom-som.dtsi:414.1-12
> > > > Label or path reg_vdd1p1 not found
> > > > Error: /builds/linux/arch/arm/boot/dts/imx6q-dhcom-som.dtsi:418.1-12
> > > > Label or path reg_vdd2p5 not found
> > > > FATAL ERROR: Syntax error parsing input tree
> > > > make[2]: *** [scripts/Makefile.lib:294:
> > > > arch/arm/boot/dts/imx6q-dhcom-pdk2.dtb] Error 1
> > > 
> > > For the record, we see same build error in our testing:
> > > 
> > > https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/jobs/1328869295
> > 
> > Will fix this and push out a -rc2.
> 
> I suspect for 4.19.y , you will need to pick the following as dependency. It
> looks like board DT patch, but it also adds the missing labels to
> imx6qdl.dtsi
> 
> 93385546ba36 ("ARM: dts: imx6qdl-sabresd: Assign corresponding power supply
> for LDOs")

Thanks, I've done this now.

greg k-h

Re: [PATCH 4.19 00/58] 4.19.194-rc1 review

[Shuah Khan]

On 6/8/21 12:26 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.194 release.
> There are 58 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 10 Jun 2021 17:59:18 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.194-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah