From: Sean Anderson <seanga2@gmail.com>
To: u-boot@lists.denx.de
Cc: Damien Le Moal <Damien.LeMoal@wdc.com>,
Leo Liang <ycliang@andestech.com>,
Lukasz Majewski <lukma@denx.de>,
Sean Anderson <seanga2@gmail.com>
Subject: [PATCH v3 10/11] k210: Don't imply CCF
Date: Fri, 11 Jun 2021 00:16:16 -0400 [thread overview]
Message-ID: <20210611041617.1665833-11-seanga2@gmail.com> (raw)
In-Reply-To: <20210611041617.1665833-1-seanga2@gmail.com>
Now that the k210 clock driver does not depend on CCF, we should no longer
imply it (and probably should not have in the first place). We can also
reduce the pre-relocation malloc arena back to something sensible.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
---
(no changes since v1)
board/sipeed/maix/Kconfig | 2 --
configs/sipeed_maix_bitm_defconfig | 1 -
2 files changed, 3 deletions(-)
diff --git a/board/sipeed/maix/Kconfig b/board/sipeed/maix/Kconfig
index adf6abb572..b1d7a7ad93 100644
--- a/board/sipeed/maix/Kconfig
+++ b/board/sipeed/maix/Kconfig
@@ -37,8 +37,6 @@ config BOARD_SPECIFIC_OPTIONS
imply SIFIVE_CLINT
imply POWER_DOMAIN
imply SIMPLE_PM_BUS
- imply CLK_CCF
- imply CLK_COMPOSITE_CCF
imply CLK_K210
imply DM_RESET
imply RESET_SYSCON
diff --git a/configs/sipeed_maix_bitm_defconfig b/configs/sipeed_maix_bitm_defconfig
index 6a06f650ea..33c67c0b54 100644
--- a/configs/sipeed_maix_bitm_defconfig
+++ b/configs/sipeed_maix_bitm_defconfig
@@ -1,5 +1,4 @@
CONFIG_RISCV=y
-CONFIG_SYS_MALLOC_F_LEN=0x10000
CONFIG_ENV_SIZE=0x1000
CONFIG_ENV_OFFSET=0xfff000
CONFIG_ENV_SECT_SIZE=0x1000
--
2.31.0
next prev parent reply other threads:[~2021-06-11 4:18 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-11 4:16 [PATCH v3 00/11] clk: k210: Rewrite K210 clock without CCF Sean Anderson
2021-06-11 4:16 ` [PATCH v3 01/11] clk: Allow force setting clock defaults before relocation Sean Anderson
2021-06-11 4:16 ` [PATCH v3 02/11] clk: k210: Rewrite to remove CCF Sean Anderson
2021-06-16 1:54 ` Leo Liang
2021-06-11 4:16 ` [PATCH v3 03/11] clk: k210: Move pll into the rest of the driver Sean Anderson
2021-06-16 1:55 ` Leo Liang
2021-06-11 4:16 ` [PATCH v3 04/11] clk: k210: Implement soc_clk_dump Sean Anderson
2021-06-16 1:56 ` Leo Liang
2021-06-11 4:16 ` [PATCH v3 05/11] clk: k210: Re-add support for setting rate Sean Anderson
2021-06-16 1:57 ` Leo Liang
2021-06-11 4:16 ` [PATCH v3 06/11] clk: k210: Don't set PLL rates if we are already at the correct rate Sean Anderson
2021-06-16 1:58 ` Leo Liang
2021-06-11 4:16 ` [PATCH v3 07/11] clk: k210: Remove bypass driver Sean Anderson
2021-06-16 1:59 ` Leo Liang
2021-06-11 4:16 ` [PATCH v3 08/11] clk: k210: Move k210 clock out of its own subdirectory Sean Anderson
2021-06-16 2:01 ` Leo Liang
2021-06-11 4:16 ` [PATCH v3 09/11] k210: dts: Set PLL1 to the same rate as PLL0 Sean Anderson
2021-06-16 2:01 ` Leo Liang
2021-06-11 4:16 ` Sean Anderson [this message]
2021-06-16 2:02 ` [PATCH v3 10/11] k210: Don't imply CCF Leo Liang
2021-06-11 4:16 ` [PATCH v3 11/11] test: Add K210 PLL tests to sandbox defconfigs Sean Anderson
2021-06-11 8:21 ` [PATCH v3 00/11] clk: k210: Rewrite K210 clock without CCF Lukasz Majewski
2021-06-11 13:57 ` Sean Anderson
2021-06-13 23:08 ` Damien Le Moal
2021-06-11 23:14 ` Sean Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210611041617.1665833-11-seanga2@gmail.com \
--to=seanga2@gmail.com \
--cc=Damien.LeMoal@wdc.com \
--cc=lukma@denx.de \
--cc=u-boot@lists.denx.de \
--cc=ycliang@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.