From: Matthew Brost <matthew.brost@intel.com> To: <intel-gfx@lists.freedesktop.org>, <dri-devel@lists.freedesktop.org> Cc: daniele.ceraolospurio@intel.com, john.c.harrison@intel.com, Michal.Wajdeczko@intel.com Subject: [PATCH 1/3] drm/i915/guc: Introduce unified HXG messages Date: Tue, 15 Jun 2021 17:13:00 -0700 [thread overview] Message-ID: <20210616001302.84233-2-matthew.brost@intel.com> (raw) In-Reply-To: <20210616001302.84233-1-matthew.brost@intel.com> From: Michal Wajdeczko <michal.wajdeczko@intel.com> New GuC firmware will unify format of MMIO and CTB H2G messages. Introduce their definitions now to allow gradual transition of our code to match new changes. Signed-off-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> --- .../gpu/drm/i915/gt/uc/abi/guc_messages_abi.h | 213 ++++++++++++++++++ 1 file changed, 213 insertions(+) diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h index 775e21f3058c..29ac823acd4c 100644 --- a/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h +++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h @@ -6,6 +6,219 @@ #ifndef _ABI_GUC_MESSAGES_ABI_H #define _ABI_GUC_MESSAGES_ABI_H +/** + * DOC: HXG Message + * + * All messages exchanged with GuC are defined using 32 bit dwords. + * First dword is treated as a message header. Remaining dwords are optional. + * + * +---+-------+--------------------------------------------------------------+ + * | | Bits | Description | + * +===+=======+==============================================================+ + * | | | | + * | 0 | 31 | **ORIGIN** - originator of the message | + * | | | - _`GUC_HXG_ORIGIN_HOST` = 0 | + * | | | - _`GUC_HXG_ORIGIN_GUC` = 1 | + * | | | | + * | +-------+--------------------------------------------------------------+ + * | | 30:28 | **TYPE** - message type | + * | | | - _`GUC_HXG_TYPE_REQUEST` = 0 | + * | | | - _`GUC_HXG_TYPE_EVENT` = 1 | + * | | | - _`GUC_HXG_TYPE_NO_RESPONSE_BUSY` = 3 | + * | | | - _`GUC_HXG_TYPE_NO_RESPONSE_RETRY` = 5 | + * | | | - _`GUC_HXG_TYPE_RESPONSE_FAILURE` = 6 | + * | | | - _`GUC_HXG_TYPE_RESPONSE_SUCCESS` = 7 | + * | +-------+--------------------------------------------------------------+ + * | | 27:0 | **AUX** - auxiliary data (depends on TYPE) | + * +---+-------+--------------------------------------------------------------+ + * | 1 | 31:0 | | + * +---+-------+ | + * |...| | **PAYLOAD** - optional payload (depends on TYPE) | + * +---+-------+ | + * | n | 31:0 | | + * +---+-------+--------------------------------------------------------------+ + */ + +#define GUC_HXG_MSG_MIN_LEN 1u +#define GUC_HXG_MSG_0_ORIGIN (0x1 << 31) +#define GUC_HXG_ORIGIN_HOST 0u +#define GUC_HXG_ORIGIN_GUC 1u +#define GUC_HXG_MSG_0_TYPE (0x7 << 28) +#define GUC_HXG_TYPE_REQUEST 0u +#define GUC_HXG_TYPE_EVENT 1u +#define GUC_HXG_TYPE_NO_RESPONSE_BUSY 3u +#define GUC_HXG_TYPE_NO_RESPONSE_RETRY 5u +#define GUC_HXG_TYPE_RESPONSE_FAILURE 6u +#define GUC_HXG_TYPE_RESPONSE_SUCCESS 7u +#define GUC_HXG_MSG_0_AUX (0xfffffff << 0) +#define GUC_HXG_MSG_n_PAYLOAD (0xffffffff << 0) + +/** + * DOC: HXG Request + * + * The `HXG Request`_ message should be used to initiate synchronous activity + * for which confirmation or return data is expected. + * + * The recipient of this message shall use `HXG Response`_, `HXG Failure`_ + * or `HXG Retry`_ message as a definite reply, and may use `HXG Busy`_ + * message as a intermediate reply. + * + * Format of @DATA0 and all @DATAn fields depends on the @ACTION code. + * + * +---+-------+--------------------------------------------------------------+ + * | | Bits | Description | + * +===+=======+==============================================================+ + * | 0 | 31 | ORIGIN | + * | +-------+--------------------------------------------------------------+ + * | | 30:28 | TYPE = GUC_HXG_TYPE_REQUEST_ | + * | +-------+--------------------------------------------------------------+ + * | | 27:16 | **DATA0** - request data (depends on ACTION) | + * | +-------+--------------------------------------------------------------+ + * | | 15:0 | **ACTION** - requested action code | + * +---+-------+--------------------------------------------------------------+ + * | 1 | 31:0 | | + * +---+-------+ | + * |...| | **DATAn** - optional data (depends on ACTION) | + * +---+-------+ | + * | n | 31:0 | | + * +---+-------+--------------------------------------------------------------+ + */ + +#define GUC_HXG_REQUEST_MSG_MIN_LEN GUC_HXG_MSG_MIN_LEN +#define GUC_HXG_REQUEST_MSG_0_DATA0 (0xfff << 16) +#define GUC_HXG_REQUEST_MSG_0_ACTION (0xffff << 0) +#define GUC_HXG_REQUEST_MSG_n_DATAn GUC_HXG_MSG_n_PAYLOAD + +/** + * DOC: HXG Event + * + * The `HXG Event`_ message should be used to initiate asynchronous activity + * that does not involves immediate confirmation nor data. + * + * Format of @DATA0 and all @DATAn fields depends on the @ACTION code. + * + * +---+-------+--------------------------------------------------------------+ + * | | Bits | Description | + * +===+=======+==============================================================+ + * | 0 | 31 | ORIGIN | + * | +-------+--------------------------------------------------------------+ + * | | 30:28 | TYPE = GUC_HXG_TYPE_EVENT_ | + * | +-------+--------------------------------------------------------------+ + * | | 27:16 | **DATA0** - event data (depends on ACTION) | + * | +-------+--------------------------------------------------------------+ + * | | 15:0 | **ACTION** - event action code | + * +---+-------+--------------------------------------------------------------+ + * | 1 | 31:0 | | + * +---+-------+ | + * |...| | **DATAn** - optional event data (depends on ACTION) | + * +---+-------+ | + * | n | 31:0 | | + * +---+-------+--------------------------------------------------------------+ + */ + +#define GUC_HXG_EVENT_MSG_MIN_LEN GUC_HXG_MSG_MIN_LEN +#define GUC_HXG_EVENT_MSG_0_DATA0 (0xfff << 16) +#define GUC_HXG_EVENT_MSG_0_ACTION (0xffff << 0) +#define GUC_HXG_EVENT_MSG_n_DATAn GUC_HXG_MSG_n_PAYLOAD + +/** + * DOC: HXG Busy + * + * The `HXG Busy`_ message may be used to acknowledge reception of the `HXG Request`_ + * message if the recipient expects that it processing will be longer than default + * timeout. + * + * The @COUNTER field may be used as a progress indicator. + * + * +---+-------+--------------------------------------------------------------+ + * | | Bits | Description | + * +===+=======+==============================================================+ + * | 0 | 31 | ORIGIN | + * | +-------+--------------------------------------------------------------+ + * | | 30:28 | TYPE = GUC_HXG_TYPE_NO_RESPONSE_BUSY_ | + * | +-------+--------------------------------------------------------------+ + * | | 27:0 | **COUNTER** - progress indicator | + * +---+-------+--------------------------------------------------------------+ + */ + +#define GUC_HXG_BUSY_MSG_LEN GUC_HXG_MSG_MIN_LEN +#define GUC_HXG_BUSY_MSG_0_COUNTER GUC_HXG_MSG_0_AUX + +/** + * DOC: HXG Retry + * + * The `HXG Retry`_ message should be used by recipient to indicate that the + * `HXG Request`_ message was dropped and it should be resent again. + * + * The @REASON field may be used to provide additional information. + * + * +---+-------+--------------------------------------------------------------+ + * | | Bits | Description | + * +===+=======+==============================================================+ + * | 0 | 31 | ORIGIN | + * | +-------+--------------------------------------------------------------+ + * | | 30:28 | TYPE = GUC_HXG_TYPE_NO_RESPONSE_RETRY_ | + * | +-------+--------------------------------------------------------------+ + * | | 27:0 | **REASON** - reason for retry | + * | | | - _`GUC_HXG_RETRY_REASON_UNSPECIFIED` = 0 | + * +---+-------+--------------------------------------------------------------+ + */ + +#define GUC_HXG_RETRY_MSG_LEN GUC_HXG_MSG_MIN_LEN +#define GUC_HXG_RETRY_MSG_0_REASON GUC_HXG_MSG_0_AUX +#define GUC_HXG_RETRY_REASON_UNSPECIFIED 0u + +/** + * DOC: HXG Failure + * + * The `HXG Failure`_ message shall be used as a reply to the `HXG Request`_ + * message that could not be processed due to an error. + * + * +---+-------+--------------------------------------------------------------+ + * | | Bits | Description | + * +===+=======+==============================================================+ + * | 0 | 31 | ORIGIN | + * | +-------+--------------------------------------------------------------+ + * | | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_FAILURE_ | + * | +-------+--------------------------------------------------------------+ + * | | 27:16 | **HINT** - additional error hint | + * | +-------+--------------------------------------------------------------+ + * | | 15:0 | **ERROR** - error/result code | + * +---+-------+--------------------------------------------------------------+ + */ + +#define GUC_HXG_FAILURE_MSG_LEN GUC_HXG_MSG_MIN_LEN +#define GUC_HXG_FAILURE_MSG_0_HINT (0xfff << 16) +#define GUC_HXG_FAILURE_MSG_0_ERROR (0xffff << 0) + +/** + * DOC: HXG Response + * + * The `HXG Response`_ message shall be used as a reply to the `HXG Request`_ + * message that was successfully processed without an error. + * + * +---+-------+--------------------------------------------------------------+ + * | | Bits | Description | + * +===+=======+==============================================================+ + * | 0 | 31 | ORIGIN | + * | +-------+--------------------------------------------------------------+ + * | | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_SUCCESS_ | + * | +-------+--------------------------------------------------------------+ + * | | 27:0 | **DATA0** - data (depends on ACTION from `HXG Request`_) | + * +---+-------+--------------------------------------------------------------+ + * | 1 | 31:0 | | + * +---+-------+ | + * |...| | **DATAn** - data (depends on ACTION from `HXG Request`_) | + * +---+-------+ | + * | n | 31:0 | | + * +---+-------+--------------------------------------------------------------+ + */ + +#define GUC_HXG_RESPONSE_MSG_MIN_LEN GUC_HXG_MSG_MIN_LEN +#define GUC_HXG_RESPONSE_MSG_0_DATA0 GUC_HXG_MSG_0_AUX +#define GUC_HXG_RESPONSE_MSG_n_DATAn GUC_HXG_MSG_n_PAYLOAD + +/* deprecated */ #define INTEL_GUC_MSG_TYPE_SHIFT 28 #define INTEL_GUC_MSG_TYPE_MASK (0xF << INTEL_GUC_MSG_TYPE_SHIFT) #define INTEL_GUC_MSG_DATA_SHIFT 16 -- 2.28.0
WARNING: multiple messages have this Message-ID (diff)
From: Matthew Brost <matthew.brost@intel.com> To: <intel-gfx@lists.freedesktop.org>, <dri-devel@lists.freedesktop.org> Subject: [Intel-gfx] [PATCH 1/3] drm/i915/guc: Introduce unified HXG messages Date: Tue, 15 Jun 2021 17:13:00 -0700 [thread overview] Message-ID: <20210616001302.84233-2-matthew.brost@intel.com> (raw) In-Reply-To: <20210616001302.84233-1-matthew.brost@intel.com> From: Michal Wajdeczko <michal.wajdeczko@intel.com> New GuC firmware will unify format of MMIO and CTB H2G messages. Introduce their definitions now to allow gradual transition of our code to match new changes. Signed-off-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> --- .../gpu/drm/i915/gt/uc/abi/guc_messages_abi.h | 213 ++++++++++++++++++ 1 file changed, 213 insertions(+) diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h index 775e21f3058c..29ac823acd4c 100644 --- a/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h +++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h @@ -6,6 +6,219 @@ #ifndef _ABI_GUC_MESSAGES_ABI_H #define _ABI_GUC_MESSAGES_ABI_H +/** + * DOC: HXG Message + * + * All messages exchanged with GuC are defined using 32 bit dwords. + * First dword is treated as a message header. Remaining dwords are optional. + * + * +---+-------+--------------------------------------------------------------+ + * | | Bits | Description | + * +===+=======+==============================================================+ + * | | | | + * | 0 | 31 | **ORIGIN** - originator of the message | + * | | | - _`GUC_HXG_ORIGIN_HOST` = 0 | + * | | | - _`GUC_HXG_ORIGIN_GUC` = 1 | + * | | | | + * | +-------+--------------------------------------------------------------+ + * | | 30:28 | **TYPE** - message type | + * | | | - _`GUC_HXG_TYPE_REQUEST` = 0 | + * | | | - _`GUC_HXG_TYPE_EVENT` = 1 | + * | | | - _`GUC_HXG_TYPE_NO_RESPONSE_BUSY` = 3 | + * | | | - _`GUC_HXG_TYPE_NO_RESPONSE_RETRY` = 5 | + * | | | - _`GUC_HXG_TYPE_RESPONSE_FAILURE` = 6 | + * | | | - _`GUC_HXG_TYPE_RESPONSE_SUCCESS` = 7 | + * | +-------+--------------------------------------------------------------+ + * | | 27:0 | **AUX** - auxiliary data (depends on TYPE) | + * +---+-------+--------------------------------------------------------------+ + * | 1 | 31:0 | | + * +---+-------+ | + * |...| | **PAYLOAD** - optional payload (depends on TYPE) | + * +---+-------+ | + * | n | 31:0 | | + * +---+-------+--------------------------------------------------------------+ + */ + +#define GUC_HXG_MSG_MIN_LEN 1u +#define GUC_HXG_MSG_0_ORIGIN (0x1 << 31) +#define GUC_HXG_ORIGIN_HOST 0u +#define GUC_HXG_ORIGIN_GUC 1u +#define GUC_HXG_MSG_0_TYPE (0x7 << 28) +#define GUC_HXG_TYPE_REQUEST 0u +#define GUC_HXG_TYPE_EVENT 1u +#define GUC_HXG_TYPE_NO_RESPONSE_BUSY 3u +#define GUC_HXG_TYPE_NO_RESPONSE_RETRY 5u +#define GUC_HXG_TYPE_RESPONSE_FAILURE 6u +#define GUC_HXG_TYPE_RESPONSE_SUCCESS 7u +#define GUC_HXG_MSG_0_AUX (0xfffffff << 0) +#define GUC_HXG_MSG_n_PAYLOAD (0xffffffff << 0) + +/** + * DOC: HXG Request + * + * The `HXG Request`_ message should be used to initiate synchronous activity + * for which confirmation or return data is expected. + * + * The recipient of this message shall use `HXG Response`_, `HXG Failure`_ + * or `HXG Retry`_ message as a definite reply, and may use `HXG Busy`_ + * message as a intermediate reply. + * + * Format of @DATA0 and all @DATAn fields depends on the @ACTION code. + * + * +---+-------+--------------------------------------------------------------+ + * | | Bits | Description | + * +===+=======+==============================================================+ + * | 0 | 31 | ORIGIN | + * | +-------+--------------------------------------------------------------+ + * | | 30:28 | TYPE = GUC_HXG_TYPE_REQUEST_ | + * | +-------+--------------------------------------------------------------+ + * | | 27:16 | **DATA0** - request data (depends on ACTION) | + * | +-------+--------------------------------------------------------------+ + * | | 15:0 | **ACTION** - requested action code | + * +---+-------+--------------------------------------------------------------+ + * | 1 | 31:0 | | + * +---+-------+ | + * |...| | **DATAn** - optional data (depends on ACTION) | + * +---+-------+ | + * | n | 31:0 | | + * +---+-------+--------------------------------------------------------------+ + */ + +#define GUC_HXG_REQUEST_MSG_MIN_LEN GUC_HXG_MSG_MIN_LEN +#define GUC_HXG_REQUEST_MSG_0_DATA0 (0xfff << 16) +#define GUC_HXG_REQUEST_MSG_0_ACTION (0xffff << 0) +#define GUC_HXG_REQUEST_MSG_n_DATAn GUC_HXG_MSG_n_PAYLOAD + +/** + * DOC: HXG Event + * + * The `HXG Event`_ message should be used to initiate asynchronous activity + * that does not involves immediate confirmation nor data. + * + * Format of @DATA0 and all @DATAn fields depends on the @ACTION code. + * + * +---+-------+--------------------------------------------------------------+ + * | | Bits | Description | + * +===+=======+==============================================================+ + * | 0 | 31 | ORIGIN | + * | +-------+--------------------------------------------------------------+ + * | | 30:28 | TYPE = GUC_HXG_TYPE_EVENT_ | + * | +-------+--------------------------------------------------------------+ + * | | 27:16 | **DATA0** - event data (depends on ACTION) | + * | +-------+--------------------------------------------------------------+ + * | | 15:0 | **ACTION** - event action code | + * +---+-------+--------------------------------------------------------------+ + * | 1 | 31:0 | | + * +---+-------+ | + * |...| | **DATAn** - optional event data (depends on ACTION) | + * +---+-------+ | + * | n | 31:0 | | + * +---+-------+--------------------------------------------------------------+ + */ + +#define GUC_HXG_EVENT_MSG_MIN_LEN GUC_HXG_MSG_MIN_LEN +#define GUC_HXG_EVENT_MSG_0_DATA0 (0xfff << 16) +#define GUC_HXG_EVENT_MSG_0_ACTION (0xffff << 0) +#define GUC_HXG_EVENT_MSG_n_DATAn GUC_HXG_MSG_n_PAYLOAD + +/** + * DOC: HXG Busy + * + * The `HXG Busy`_ message may be used to acknowledge reception of the `HXG Request`_ + * message if the recipient expects that it processing will be longer than default + * timeout. + * + * The @COUNTER field may be used as a progress indicator. + * + * +---+-------+--------------------------------------------------------------+ + * | | Bits | Description | + * +===+=======+==============================================================+ + * | 0 | 31 | ORIGIN | + * | +-------+--------------------------------------------------------------+ + * | | 30:28 | TYPE = GUC_HXG_TYPE_NO_RESPONSE_BUSY_ | + * | +-------+--------------------------------------------------------------+ + * | | 27:0 | **COUNTER** - progress indicator | + * +---+-------+--------------------------------------------------------------+ + */ + +#define GUC_HXG_BUSY_MSG_LEN GUC_HXG_MSG_MIN_LEN +#define GUC_HXG_BUSY_MSG_0_COUNTER GUC_HXG_MSG_0_AUX + +/** + * DOC: HXG Retry + * + * The `HXG Retry`_ message should be used by recipient to indicate that the + * `HXG Request`_ message was dropped and it should be resent again. + * + * The @REASON field may be used to provide additional information. + * + * +---+-------+--------------------------------------------------------------+ + * | | Bits | Description | + * +===+=======+==============================================================+ + * | 0 | 31 | ORIGIN | + * | +-------+--------------------------------------------------------------+ + * | | 30:28 | TYPE = GUC_HXG_TYPE_NO_RESPONSE_RETRY_ | + * | +-------+--------------------------------------------------------------+ + * | | 27:0 | **REASON** - reason for retry | + * | | | - _`GUC_HXG_RETRY_REASON_UNSPECIFIED` = 0 | + * +---+-------+--------------------------------------------------------------+ + */ + +#define GUC_HXG_RETRY_MSG_LEN GUC_HXG_MSG_MIN_LEN +#define GUC_HXG_RETRY_MSG_0_REASON GUC_HXG_MSG_0_AUX +#define GUC_HXG_RETRY_REASON_UNSPECIFIED 0u + +/** + * DOC: HXG Failure + * + * The `HXG Failure`_ message shall be used as a reply to the `HXG Request`_ + * message that could not be processed due to an error. + * + * +---+-------+--------------------------------------------------------------+ + * | | Bits | Description | + * +===+=======+==============================================================+ + * | 0 | 31 | ORIGIN | + * | +-------+--------------------------------------------------------------+ + * | | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_FAILURE_ | + * | +-------+--------------------------------------------------------------+ + * | | 27:16 | **HINT** - additional error hint | + * | +-------+--------------------------------------------------------------+ + * | | 15:0 | **ERROR** - error/result code | + * +---+-------+--------------------------------------------------------------+ + */ + +#define GUC_HXG_FAILURE_MSG_LEN GUC_HXG_MSG_MIN_LEN +#define GUC_HXG_FAILURE_MSG_0_HINT (0xfff << 16) +#define GUC_HXG_FAILURE_MSG_0_ERROR (0xffff << 0) + +/** + * DOC: HXG Response + * + * The `HXG Response`_ message shall be used as a reply to the `HXG Request`_ + * message that was successfully processed without an error. + * + * +---+-------+--------------------------------------------------------------+ + * | | Bits | Description | + * +===+=======+==============================================================+ + * | 0 | 31 | ORIGIN | + * | +-------+--------------------------------------------------------------+ + * | | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_SUCCESS_ | + * | +-------+--------------------------------------------------------------+ + * | | 27:0 | **DATA0** - data (depends on ACTION from `HXG Request`_) | + * +---+-------+--------------------------------------------------------------+ + * | 1 | 31:0 | | + * +---+-------+ | + * |...| | **DATAn** - data (depends on ACTION from `HXG Request`_) | + * +---+-------+ | + * | n | 31:0 | | + * +---+-------+--------------------------------------------------------------+ + */ + +#define GUC_HXG_RESPONSE_MSG_MIN_LEN GUC_HXG_MSG_MIN_LEN +#define GUC_HXG_RESPONSE_MSG_0_DATA0 GUC_HXG_MSG_0_AUX +#define GUC_HXG_RESPONSE_MSG_n_DATAn GUC_HXG_MSG_n_PAYLOAD + +/* deprecated */ #define INTEL_GUC_MSG_TYPE_SHIFT 28 #define INTEL_GUC_MSG_TYPE_MASK (0xF << INTEL_GUC_MSG_TYPE_SHIFT) #define INTEL_GUC_MSG_DATA_SHIFT 16 -- 2.28.0 _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2021-06-15 23:55 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-16 0:12 [PATCH 0/3] Update firmware to v62.0.0 Matthew Brost 2021-06-16 0:12 ` [Intel-gfx] " Matthew Brost 2021-06-16 0:13 ` Matthew Brost [this message] 2021-06-16 0:13 ` [Intel-gfx] [PATCH 1/3] drm/i915/guc: Introduce unified HXG messages Matthew Brost 2021-06-16 0:13 ` [PATCH 2/3] drm/i915/guc: Update firmware to v62.0.0 Matthew Brost 2021-06-16 0:13 ` [Intel-gfx] " Matthew Brost 2021-06-17 1:41 ` Daniele Ceraolo Spurio 2021-06-17 1:41 ` [Intel-gfx] " Daniele Ceraolo Spurio 2021-06-17 6:24 ` Michal Wajdeczko 2021-06-17 6:24 ` [Intel-gfx] " Michal Wajdeczko 2021-06-16 0:13 ` [PATCH 3/3] drm/i915/doc: Include GuC ABI documentation Matthew Brost 2021-06-16 0:13 ` [Intel-gfx] " Matthew Brost 2021-06-16 0:20 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Update firmware to v62.0.0 (rev4) Patchwork 2021-06-16 0:22 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork 2021-06-16 0:49 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork 2021-06-16 6:04 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork 2021-06-18 22:38 ` Matt Roper 2021-06-16 15:16 ` [Intel-gfx] [PATCH 0/3] Update firmware to v62.0.0 Mike Lothian 2021-06-16 15:16 ` Mike Lothian -- strict thread matches above, loose matches on Subject: below -- 2021-06-14 19:42 Matthew Brost 2021-06-14 19:42 ` [PATCH 1/3] drm/i915/guc: Introduce unified HXG messages Matthew Brost
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210616001302.84233-2-matthew.brost@intel.com \ --to=matthew.brost@intel.com \ --cc=Michal.Wajdeczko@intel.com \ --cc=daniele.ceraolospurio@intel.com \ --cc=dri-devel@lists.freedesktop.org \ --cc=intel-gfx@lists.freedesktop.org \ --cc=john.c.harrison@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.