All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wayne Lin <Wayne.Lin@amd.com>
To: <dri-devel@lists.freedesktop.org>
Cc: <lyude@redhat.com>, <Nicholas.Kazlauskas@amd.com>,
	<harry.wentland@amd.com>, <jerry.zuo@amd.com>,
	<aurabindo.pillai@amd.com>, Wayne Lin <Wayne.Lin@amd.com>,
	<stable@vger.kernel.org>
Subject: [PATCH v2 2/2] drm/dp_mst: Avoid to mess up payload table by ports in stale topology
Date: Wed, 16 Jun 2021 11:55:01 +0800	[thread overview]
Message-ID: <20210616035501.3776-3-Wayne.Lin@amd.com> (raw)
In-Reply-To: <20210616035501.3776-1-Wayne.Lin@amd.com>

[Why]
After unplug/hotplug hub from the system, userspace might start to
clear stale payloads gradually. If we call drm_dp_mst_deallocate_vcpi()
to release stale VCPI of those ports which are not relating to current
topology, we have chane to wrongly clear active payload table entry for
current topology.

E.g.
We have allocated VCPI 1 in current payload table and we call
drm_dp_mst_deallocate_vcpi() to clean VCPI 1 in stale topology. In
drm_dp_mst_deallocate_vcpi(), it will call drm_dp_mst_put_payload_id()
tp put VCPI 1 and which means ID 1 is available again. Thereafter, if we
want to allocate a new payload stream, it will find ID 1 is available by
drm_dp_mst_assign_payload_id(). However, ID 1 is being used

[How]
Check target sink is relating to current topology or not before doing
any payload table update.
Searching upward to find the target sink's relevant root branch device.
If the found root branch device is not the same root of current
topology, don't update payload table.

Changes since v1:
* Change debug macro to use drm_dbg_kms() instead
* Amend the commit message to add Cc tag.

Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Cc: stable@vger.kernel.org
---
 drivers/gpu/drm/drm_dp_mst_topology.c | 29 +++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index b41b837db66d..9ac148efd9e4 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -94,6 +94,9 @@ static int drm_dp_mst_register_i2c_bus(struct drm_dp_mst_port *port);
 static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_mst_port *port);
 static void drm_dp_mst_kick_tx(struct drm_dp_mst_topology_mgr *mgr);
 
+static bool drm_dp_mst_port_downstream_of_branch(struct drm_dp_mst_port *port,
+						 struct drm_dp_mst_branch *branch);
+
 #define DBG_PREFIX "[dp_mst]"
 
 #define DP_STR(x) [DP_ ## x] = #x
@@ -3366,6 +3369,7 @@ int drm_dp_update_payload_part1(struct drm_dp_mst_topology_mgr *mgr)
 	struct drm_dp_mst_port *port;
 	int i, j;
 	int cur_slots = 1;
+	bool skip;
 
 	mutex_lock(&mgr->payload_lock);
 	for (i = 0; i < mgr->max_payloads; i++) {
@@ -3380,6 +3384,14 @@ int drm_dp_update_payload_part1(struct drm_dp_mst_topology_mgr *mgr)
 			port = container_of(vcpi, struct drm_dp_mst_port,
 					    vcpi);
 
+			mutex_lock(&mgr->lock);
+			skip = !drm_dp_mst_port_downstream_of_branch(port, mgr->mst_primary);
+			mutex_unlock(&mgr->lock);
+
+			if (skip) {
+				drm_dbg_kms("Virtual channel %d is not in current topology\n", i);
+				continue;
+			}
 			/* Validated ports don't matter if we're releasing
 			 * VCPI
 			 */
@@ -3479,6 +3491,7 @@ int drm_dp_update_payload_part2(struct drm_dp_mst_topology_mgr *mgr)
 	struct drm_dp_mst_port *port;
 	int i;
 	int ret = 0;
+	bool skip;
 
 	mutex_lock(&mgr->payload_lock);
 	for (i = 0; i < mgr->max_payloads; i++) {
@@ -3488,6 +3501,13 @@ int drm_dp_update_payload_part2(struct drm_dp_mst_topology_mgr *mgr)
 
 		port = container_of(mgr->proposed_vcpis[i], struct drm_dp_mst_port, vcpi);
 
+		mutex_lock(&mgr->lock);
+		skip = !drm_dp_mst_port_downstream_of_branch(port, mgr->mst_primary);
+		mutex_unlock(&mgr->lock);
+
+		if (skip)
+			continue;
+
 		drm_dbg_kms(mgr->dev, "payload %d %d\n", i, mgr->payloads[i].payload_state);
 		if (mgr->payloads[i].payload_state == DP_PAYLOAD_LOCAL) {
 			ret = drm_dp_create_payload_step2(mgr, port, mgr->proposed_vcpis[i]->vcpi, &mgr->payloads[i]);
@@ -4574,9 +4594,18 @@ EXPORT_SYMBOL(drm_dp_mst_reset_vcpi_slots);
 void drm_dp_mst_deallocate_vcpi(struct drm_dp_mst_topology_mgr *mgr,
 				struct drm_dp_mst_port *port)
 {
+	bool skip;
+
 	if (!port->vcpi.vcpi)
 		return;
 
+	mutex_lock(&mgr->lock);
+	skip = !drm_dp_mst_port_downstream_of_branch(port, mgr->mst_primary);
+	mutex_unlock(&mgr->lock);
+
+	if (skip)
+		return;
+
 	drm_dp_mst_put_payload_id(mgr, port->vcpi.vcpi);
 	port->vcpi.num_slots = 0;
 	port->vcpi.pbn = 0;
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Wayne Lin <Wayne.Lin@amd.com>
To: <dri-devel@lists.freedesktop.org>
Cc: stable@vger.kernel.org, jerry.zuo@amd.com,
	aurabindo.pillai@amd.com, Wayne Lin <Wayne.Lin@amd.com>,
	Nicholas.Kazlauskas@amd.com
Subject: [PATCH v2 2/2] drm/dp_mst: Avoid to mess up payload table by ports in stale topology
Date: Wed, 16 Jun 2021 11:55:01 +0800	[thread overview]
Message-ID: <20210616035501.3776-3-Wayne.Lin@amd.com> (raw)
In-Reply-To: <20210616035501.3776-1-Wayne.Lin@amd.com>

[Why]
After unplug/hotplug hub from the system, userspace might start to
clear stale payloads gradually. If we call drm_dp_mst_deallocate_vcpi()
to release stale VCPI of those ports which are not relating to current
topology, we have chane to wrongly clear active payload table entry for
current topology.

E.g.
We have allocated VCPI 1 in current payload table and we call
drm_dp_mst_deallocate_vcpi() to clean VCPI 1 in stale topology. In
drm_dp_mst_deallocate_vcpi(), it will call drm_dp_mst_put_payload_id()
tp put VCPI 1 and which means ID 1 is available again. Thereafter, if we
want to allocate a new payload stream, it will find ID 1 is available by
drm_dp_mst_assign_payload_id(). However, ID 1 is being used

[How]
Check target sink is relating to current topology or not before doing
any payload table update.
Searching upward to find the target sink's relevant root branch device.
If the found root branch device is not the same root of current
topology, don't update payload table.

Changes since v1:
* Change debug macro to use drm_dbg_kms() instead
* Amend the commit message to add Cc tag.

Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Cc: stable@vger.kernel.org
---
 drivers/gpu/drm/drm_dp_mst_topology.c | 29 +++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index b41b837db66d..9ac148efd9e4 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -94,6 +94,9 @@ static int drm_dp_mst_register_i2c_bus(struct drm_dp_mst_port *port);
 static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_mst_port *port);
 static void drm_dp_mst_kick_tx(struct drm_dp_mst_topology_mgr *mgr);
 
+static bool drm_dp_mst_port_downstream_of_branch(struct drm_dp_mst_port *port,
+						 struct drm_dp_mst_branch *branch);
+
 #define DBG_PREFIX "[dp_mst]"
 
 #define DP_STR(x) [DP_ ## x] = #x
@@ -3366,6 +3369,7 @@ int drm_dp_update_payload_part1(struct drm_dp_mst_topology_mgr *mgr)
 	struct drm_dp_mst_port *port;
 	int i, j;
 	int cur_slots = 1;
+	bool skip;
 
 	mutex_lock(&mgr->payload_lock);
 	for (i = 0; i < mgr->max_payloads; i++) {
@@ -3380,6 +3384,14 @@ int drm_dp_update_payload_part1(struct drm_dp_mst_topology_mgr *mgr)
 			port = container_of(vcpi, struct drm_dp_mst_port,
 					    vcpi);
 
+			mutex_lock(&mgr->lock);
+			skip = !drm_dp_mst_port_downstream_of_branch(port, mgr->mst_primary);
+			mutex_unlock(&mgr->lock);
+
+			if (skip) {
+				drm_dbg_kms("Virtual channel %d is not in current topology\n", i);
+				continue;
+			}
 			/* Validated ports don't matter if we're releasing
 			 * VCPI
 			 */
@@ -3479,6 +3491,7 @@ int drm_dp_update_payload_part2(struct drm_dp_mst_topology_mgr *mgr)
 	struct drm_dp_mst_port *port;
 	int i;
 	int ret = 0;
+	bool skip;
 
 	mutex_lock(&mgr->payload_lock);
 	for (i = 0; i < mgr->max_payloads; i++) {
@@ -3488,6 +3501,13 @@ int drm_dp_update_payload_part2(struct drm_dp_mst_topology_mgr *mgr)
 
 		port = container_of(mgr->proposed_vcpis[i], struct drm_dp_mst_port, vcpi);
 
+		mutex_lock(&mgr->lock);
+		skip = !drm_dp_mst_port_downstream_of_branch(port, mgr->mst_primary);
+		mutex_unlock(&mgr->lock);
+
+		if (skip)
+			continue;
+
 		drm_dbg_kms(mgr->dev, "payload %d %d\n", i, mgr->payloads[i].payload_state);
 		if (mgr->payloads[i].payload_state == DP_PAYLOAD_LOCAL) {
 			ret = drm_dp_create_payload_step2(mgr, port, mgr->proposed_vcpis[i]->vcpi, &mgr->payloads[i]);
@@ -4574,9 +4594,18 @@ EXPORT_SYMBOL(drm_dp_mst_reset_vcpi_slots);
 void drm_dp_mst_deallocate_vcpi(struct drm_dp_mst_topology_mgr *mgr,
 				struct drm_dp_mst_port *port)
 {
+	bool skip;
+
 	if (!port->vcpi.vcpi)
 		return;
 
+	mutex_lock(&mgr->lock);
+	skip = !drm_dp_mst_port_downstream_of_branch(port, mgr->mst_primary);
+	mutex_unlock(&mgr->lock);
+
+	if (skip)
+		return;
+
 	drm_dp_mst_put_payload_id(mgr, port->vcpi.vcpi);
 	port->vcpi.num_slots = 0;
 	port->vcpi.pbn = 0;
-- 
2.17.1


  parent reply	other threads:[~2021-06-16  3:55 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-16  3:54 [PATCH v2 0/2] Fix observed mst problems with StarTech hub Wayne Lin
2021-06-16  3:55 ` [PATCH v2 1/2] drm/dp_mst: Do not set proposed vcpi directly Wayne Lin
2021-06-16  3:55   ` Wayne Lin
2021-06-16 19:53   ` Harry Wentland
2021-06-16 19:53     ` Harry Wentland
2021-06-17  8:47     ` Lin, Wayne
2021-06-17  8:47       ` Lin, Wayne
2021-06-16  3:55 ` Wayne Lin [this message]
2021-06-16  3:55   ` [PATCH v2 2/2] drm/dp_mst: Avoid to mess up payload table by ports in stale topology Wayne Lin
2021-06-16 19:26   ` Souza, Jose
2021-06-16 19:26     ` Souza, Jose
2021-06-17  4:01   ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210616035501.3776-3-Wayne.Lin@amd.com \
    --to=wayne.lin@amd.com \
    --cc=Nicholas.Kazlauskas@amd.com \
    --cc=aurabindo.pillai@amd.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=harry.wentland@amd.com \
    --cc=jerry.zuo@amd.com \
    --cc=lyude@redhat.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.