[RFC v1 091/256] cl8k: add fw/fw_msg.h

[viktor.barna@celeno.com]

From: Viktor Barna <viktor.barna@celeno.com>

(Part of the split. Please, take a look at the cover letter for more
details).

Signed-off-by: Viktor Barna <viktor.barna@celeno.com>
---
 drivers/net/wireless/celeno/cl8k/fw/fw_msg.h | 1656 ++++++++++++++++++
 1 file changed, 1656 insertions(+)
 create mode 100644 drivers/net/wireless/celeno/cl8k/fw/fw_msg.h

diff --git a/drivers/net/wireless/celeno/cl8k/fw/fw_msg.h b/drivers/net/wireless/celeno/cl8k/fw/fw_msg.h
new file mode 100644
index 000000000000..fbad729724c9
--- /dev/null
+++ b/drivers/net/wireless/celeno/cl8k/fw/fw_msg.h
@@ -0,0 +1,1656 @@
+/* SPDX-License-Identifier: MIT */
+/* Copyright(c) 2019-2021, Celeno Communications Ltd. */
+
+#ifndef CL_FW_MSG_H
+#define CL_FW_MSG_H
+
+#include <linux/types.h>
+#include "vendor_cmd.h"
+#include "def.h"
+#include "ipc_shared.h"
+#include "wrs/wrs_db.h"
+#include "calib.h"
+#include "fem.h"
+#include "agc_params.h"
+
+#if !defined(__LITTLE_ENDIAN_BITFIELD) && !defined(__BIG_ENDIAN_BITFIELD)
+#error "Please fix <asm/byteorder.h>"
+#endif
+
+#define MSG_SHIFT       7
+#define FIRST_MSG(task) ((task) << MSG_SHIFT)
+
+/* Message structure. */
+struct fw_msg {
+       u16 msg_id;     /* Message ID. */
+       u8 dst_kern_id; /* Destination kernel ID. */
+       u8 dst_task_id; /* Destination task ID. */
+       u8 src_kern_id; /* Source kernel ID. */
+       u8 src_task_id; /* Source task ID. */
+       u16 param_len;  /* Parameter embedded struct length. */
+       u32 param[1];   /* Parameter embedded struct - must be word-aligned. */
+};
+
+enum dbg_print {
+       DBG_PRINT_RESET,
+       DBG_PRINT_HELP,
+       DBG_PRINT_TX_STATS,
+       DBG_PRINT_RX_STATS,
+       DBG_PRINT_TXDESC_LIST,
+       DBG_PRINT_AGG_DESC,
+       DBG_PRINT_TX_TRACE_DUMP,
+       DBG_PRINT_TX_RATE_CTRL,
+       DBG_PRINT_FO_CALIB,
+       DBG_PRINT_TX_RETRY,
+       DBG_PRINT_TX_BCN_FLUSH,
+       DBG_PRINT_FW_TRACE,
+       DBG_PRINT_ENHANCED_TIM,
+       DBG_PRINT_TX_DELBA_STATS,
+       DBG_PRINT_RATE_LIMITER,
+       DBG_PRINT_POWER_SAVE_STATS,
+       DBG_PRINT_BF_CTRL_ACTIVE,
+       DBG_PRINT_BF_CTRL_PASSIVE,
+       DBG_PRINT_PERIODIC_TX,
+       DBG_PRINT_MU_GRP_STATS,
+       DBG_PRINT_INT_FRAME_STATS,
+       DBG_PRINT_BMU_STATS,
+       DBG_PRINT_RX_TRACE_DUMP,
+       DBG_PRINT_RD_RW_IDX,
+       DBG_PRINT_OLYMPUS_REG_DUMP,
+       DBG_PRINT_TX_POWER_MEMORY,
+       DBG_PRINT_TX_POWER_MACHW_REGS,
+       DBG_PRINT_TX_POWER_TABLES,
+       DBG_PRINT_DBG_REGS_INFO,
+       DBG_PRINT_RICU_REGS_DUMP,
+       DBG_PRINT_RXM_STATUS,
+       DBG_PRINT_TXM_STATUS,
+       DBG_PRINT_VALID_BITMAP,
+       DBG_PRINT_TRIGGER_FLOW_INFO,
+       DBG_PRINT_LAST
+};
+
+enum {
+       TASK_MM,
+       TASK_DBG,
+       TASK_MAX,
+};
+
+/* List of messages related to the task. */
+enum mm_msg_tag {
+       /* Reset message */
+       MM_RESET_REQ = FIRST_MSG(TASK_MM),
+       MM_RESET_CFM,
+       /* Start message */
+       MM_START_REQ,
+       MM_START_CFM,
+       /* Version message */
+       MM_VERSION_REQ,
+       MM_VERSION_CFM,
+       /* Add interface message */
+       MM_ADD_IF_REQ,
+       MM_ADD_IF_CFM,
+       /* Remove interface message */
+       MM_REMOVE_IF_REQ,
+       MM_REMOVE_IF_CFM,
+       /* Station add message */
+       MM_STA_ADD_REQ,
+       MM_STA_ADD_CFM,
+       /* Station del message */
+       MM_STA_DEL_REQ,
+       MM_STA_DEL_CFM,
+       /* Set filter message */
+       MM_SET_FILTER_REQ,
+       MM_SET_FILTER_CFM,
+       /* Set channel message */
+       MM_SET_CHANNEL_REQ,
+       MM_SET_CHANNEL_CFM,
+       /* Set DTIM message */
+       MM_SET_DTIM_REQ,
+       MM_SET_DTIM_CFM,
+       /* Set beacon interval message */
+       MM_SET_BEACON_INT_REQ,
+       MM_SET_BEACON_INT_CFM,
+       /* Set basic rates message */
+       MM_SET_BASIC_RATES_REQ,
+       MM_SET_BASIC_RATES_CFM,
+       /* Set BSSID message */
+       MM_SET_BSSID_REQ,
+       MM_SET_BSSID_CFM,
+       /* Set EDCA message */
+       MM_SET_EDCA_REQ,
+       MM_SET_EDCA_CFM,
+       /* Set associated message */
+       MM_SET_ASSOCIATED_REQ,
+       MM_SET_ASSOCIATED_CFM,
+       /* Set slot time message */
+       MM_SET_SLOTTIME_REQ,
+       MM_SET_SLOTTIME_CFM,
+       /* Set idle message */
+       MM_SET_IDLE_REQ,
+       MM_SET_IDLE_CFM,
+       /* Key add message */
+       MM_KEY_ADD_REQ,
+       MM_KEY_ADD_CFM,
+       /* Key delete message */
+       MM_KEY_DEL_REQ,
+       MM_KEY_DEL_CFM,
+       /* Block ack add TX message */
+       MM_BA_ADD_TX_REQ,
+       MM_BA_ADD_TX_CFM,
+       /* Block ack add RX message */
+       MM_BA_ADD_RX_REQ,
+       MM_BA_ADD_RX_CFM,
+       /* Block ack delete message */
+       MM_BA_DEL_REQ,
+       MM_BA_DEL_CFM,
+       /* PHY reset message */
+       MM_PHY_RESET_REQ,
+       MM_PHY_RESET_CFM,
+       /* Available BA TX queue message */
+       MM_AVAILABLE_BA_TXQ_REQ,
+       MM_AVAILABLE_BA_TXQ_CFM,
+       /* Update rate DL message */
+       MM_UPDATE_RATE_DL_REQ,
+       MM_UPDATE_RATE_DL_CFM,
+       /* Set VNS message */
+       MM_SET_VNS_REQ,
+       MM_SET_VNS_CFM,
+       /* Set TX BF message */
+       MM_SET_TX_BF_REQ,
+       MM_SET_TX_BF_CFM,
+       /* Sounding message */
+       MM_SOUNDING_REQ,
+       MM_SOUNDING_CFM,
+       // Sounding pairing message
+       MM_SOUNDING_PAIRING_REQ,
+       MM_SOUNDING_PAIRING_CFM,
+       /* Sounding interval message */
+       MM_SOUNDING_INTERVAL_REQ,
+       MM_SOUNDING_INTERVAL_CFM,
+       /* Sounding station switch message */
+       MM_SOUNDING_STA_SWITCH_REQ,
+       MM_SOUNDING_STA_SWITCH_CFM,
+       /* Configure CCA message */
+       MM_CONFIG_CCA_REQ,
+       MM_CONFIG_CCA_CFM,
+       /* Set DFS message */
+       MM_SET_DFS_REQ,
+       MM_SET_DFS_CFM,
+       /* Set antenna bitmap message */
+       MM_SET_ANT_BITMAP_REQ,
+       MM_SET_ANT_BITMAP_CFM,
+       /* Set NDP TX control message */
+       MM_NDP_TX_CONTROL_REQ,
+       MM_NDP_TX_CONTROL_CFM,
+       /* Register write message */
+       MM_REG_WRITE_REQ,
+       MM_REG_WRITE_CFM,
+       /* Protection mode message */
+       MM_PROT_MODE_REQ,
+       MM_PROT_MODE_CFM,
+       /* Goto power reduction message */
+       MM_GOTO_POWER_REDUCTION_REQ,
+       MM_GOTO_POWER_REDUCTION_CFM,
+       /* Backup beacon enable message */
+       MM_BACKUP_BCN_EN_REQ,
+       MM_BACKUP_BCN_EN_CFM,
+       /* Start periodic TX time message */
+       MM_START_PERIODIC_TX_TIME_REQ,
+       MM_START_PERIODIC_TX_TIME_CFM,
+       /* Anamon read message */
+       MM_ANAMON_READ_REQ,
+       MM_ANAMON_READ_CFM,
+       /* Refresh power message */
+       MM_REFRESH_PWR_REQ,
+       MM_REFRESH_PWR_CFM,
+       /* Set antenna power offset message */
+       MM_SET_ANT_PWR_OFFSET_REQ,
+       MM_SET_ANT_PWR_OFFSET_CFM,
+       /* Set rate fallback message */
+       MM_SET_RATE_FALLBACK_REQ,
+       MM_SET_RATE_FALLBACK_CFM,
+       /* TWT setup message */
+       MM_TWT_SETUP_REQ,
+       MM_TWT_SETUP_CFM,
+       /* TWT teardown message */
+       MM_TWT_TEARDOWN_REQ,
+       MM_TWT_TEARDOWN_CFM,
+       /* FW resource management message */
+       MM_RSRC_MGMT_REQ,
+       MM_RSRC_MGMT_CFM,
+       /* Set frequency offset message */
+       MM_SET_FREQ_OFFSET_REQ,
+       MM_SET_FREQ_OFFSET_CFM,
+
+       MM_REQ_CFM_MAX,
+
+       /* ############### Firmware internal messages   ############### */
+       /* Periodic task - reset ADC / DAC modules. */
+       MM_ADC_DAC_PERIODIC_TIMER = MM_REQ_CFM_MAX,
+       /* Dynamic calibration config */
+       MM_DYNAMIC_CALIBRATION_CONFIG,
+       /* Set AGC values. */
+       MM_SET_AGC_VALS,
+       /* MU-EDCA Timer interrupt message */
+       MM_MU_EDCA_TIMER,
+       /* TWT Timer interrupt message */
+       MM_TWT_TIMER,
+
+       /* ############### Firmware indication messages   ############### */
+       /* Start of indication messages */
+       MM_FIRST_IND,
+       /* TX aggregation indication from FW */
+       MM_AGG_TX_REPORT_IND = MM_FIRST_IND,
+       /* Indication for BF sounding */
+       MM_SOUNDING_IND,
+       /* Indication of fw error */
+       MM_FW_ERROR_IND,
+       /* Async indication that MAC is in idle */
+       MM_IDLE_ASYNC_IND,
+       /* Intidcation of FW resource management decision */
+       MM_RSRC_MGMT_IND,
+
+       /* MAX number of messages */
+       MM_MAX,
+};
+
+/* Firmware resource enums types (for the API sanity) */
+enum mm_rsrc_mgmt_sanity {
+       MM_RSRC_MGMT_SANITY_FIRST,
+
+       MM_RSRC_MGMT_SANITY_SELF = MM_RSRC_MGMT_SANITY_FIRST,
+       MM_RSRC_MGMT_SANITY_SUBTYPES,
+       MM_RSRC_MGMT_SANITY_ACTION_HINTS,
+       MM_RSRC_MGMT_SANITY_CONTROL_OF,
+
+       MM_RSRC_MGMT_SANITY_MAX
+};
+
+/* Firmware resource hints types */
+enum mm_rsrc_mgmt_subtype {
+       /* DRV -> FW, REQ (with CFM) */
+       MM_RSRC_MGMT_FIRST,
+
+       MM_RSRC_MGMT_API_SANITY = MM_RSRC_MGMT_FIRST,
+       MM_RSRC_MGMT_TRAFFIC_START,
+       MM_RSRC_MGMT_TRAFFIC_STOP,
+       MM_RSRC_MGMT_RATES_UPDATE,
+       MM_RSRC_MGMT_CECLI_HINT,
+
+       /* DRV <- FW, IND */
+       MM_RSRC_MGMT_ACTION_HINT,
+       MM_RSRC_MGMT_ENV_CHANGE,
+       MM_RSRC_MGMT_STATS,
+       MM_RSRC_MGMT_CONFIG_QUERY,
+       MM_RSRC_MGMT_NOTIF_POLICY_SET,
+
+       MM_RSRC_MGMT_MAX
+};
+
+enum mm_rsrc_mgmt_action_hint {
+       MM_RSRC_MGMT_ACTION_FIRST,
+
+       MM_RSRC_MGMT_ACTION_ENABLE = MM_RSRC_MGMT_ACTION_FIRST,
+       MM_RSRC_MGMT_ACTION_DISABLE,
+       MM_RSRC_MGMT_ACTION_RESTORE_DEFAULT,
+       MM_RSRC_MGMT_ACTION_SET,
+       MM_RSRC_MGMT_ACTION_GET,
+
+       MM_RSRC_MGMT_ACTION_MAX
+};
+
+enum mm_rsrc_mgmt_control_of {
+       MM_RSRC_MGMT_OF_FIRST,
+
+       MM_RSRC_MGMT_OF_TX_AMSDU = MM_RSRC_MGMT_OF_FIRST,
+       MM_RSRC_MGMT_OF_RX_AMSDU,
+       MM_RSRC_MGMT_OF_PROT_MODE,
+       MM_RSRC_MGMT_OF_CCA,
+
+       MM_RSRC_MGMT_OF_MAX
+};
+
+struct mm_rsrc_mgmt_active_sta {
+       u8 idx;
+       struct {
+               u8 bw;
+               u8 nss;
+               u8 mcs;
+       } su_rate, max_rate;
+};
+
+struct mm_rsrc_mgmt_notif_policy {
+       bool enabled;
+       u8 level_mask;
+       u8 direction_mask;
+       struct {
+               s8 low_th;
+               s8 high_th;
+       } active_sta;
+};
+
+struct mm_rsrc_mgmt_cecli {
+       __le32 num_params;
+       __le32 mode;
+       char option;
+       u8 len;
+       __le32 params[0];
+};
+
+struct mm_rsrc_mgmt_req {
+       u8 subtype;
+       union {
+               struct {
+                       u8 enum_type;
+                       __le32 enum_max;
+                       __le32 index;
+                       u8 len;
+                       char descr[0];
+               } api_sanity;
+               struct {
+                       u8 level;
+                       u8 direction;
+                       struct {
+                               u8 cnt;
+                               struct mm_rsrc_mgmt_active_sta list[0];
+                       } active_sta;
+               } traffic_event;
+               struct {
+                       struct mm_rsrc_mgmt_active_sta sta;
+               } rate_event;
+               struct mm_rsrc_mgmt_cecli cecli_event;
+       } u;
+};
+
+struct mm_rsrc_mgmt_cfm {
+       u8 subtype;
+       s8 status;
+};
+
+struct mm_rsrc_mgmt_ind {
+       u8 subtype;
+       union {
+               struct {
+                       __le16 target;
+                       u8 action;
+                       u8 data[0];
+               } action_hint;
+               struct {
+                       u8 state;
+               } env_event;
+               struct {
+                       __le16 target;
+               } cfg_query;
+               struct {
+                       __le32 stub;
+               } stats;
+               struct {
+                       u8 subtype;
+                       struct mm_rsrc_mgmt_notif_policy settings;
+               } notif_policy_set;
+       } u;
+};
+
+/* Interface types */
+enum {
+       MM_STA,
+       MM_IBSS,
+       MM_AP,
+       MM_MONITOR,
+       MM_MESH_POINT,
+};
+
+/* BA agreement types */
+enum {
+       /* BlockAck agreement for TX */
+       BA_AGMT_TX,
+       /* BlockAck agreement for RX */
+       BA_AGMT_RX,
+};
+
+/* BA agreement related status */
+enum {
+       BA_AGMT_ESTABLISHED,
+       BA_AGMT_ALREADY_EXISTS,
+       BA_AGMT_DELETED,
+       BA_AGMT_DOES_NOT_EXIST,
+       BA_AGMT_NOT_ESTABLISHED,
+};
+
+/* MM_BA_TXQUEUE request / confirm related status */
+enum {
+       BA_TXQUEUE_INVALID,
+       BA_TXQUEUE_VALID,
+};
+
+/* MAC address structure. */
+struct mac_addr {
+       /* Array of bytes that make up the MAC address. */
+       u8 array[ETH_ALEN];
+};
+
+#define PWR_TBL_HE_BF_SIZE  (WRS_SS_MAX + 1)
+#define PWR_TBL_VHT_BF_SIZE WRS_SS_MAX
+
+/* DCOC/IQ Calibration related defines */
+#define CALIB_SUCCESS 0x00
+#define CALIB_FAIL    0x01
+
+/*
+ * Structure containing the power tables
+ * All values are in resolution of 0.5dBm
+ */
+struct cl_pwr_tables {
+       /* Regular Tx */
+       s8 ant_pwr_he[CHNL_BW_MAX][WRS_MCS_MAX_HE][PWR_TBL_HE_BF_SIZE];
+       s8 ant_pwr_ht_vht[CHNL_BW_MAX][WRS_MCS_MAX_VHT][PWR_TBL_VHT_BF_SIZE];
+       s8 ant_pwr_ofdm[WRS_MCS_MAX_OFDM];
+       s8 ant_pwr_cck[WRS_MCS_MAX_CCK];
+       /* VNS */
+       s8 ant_pwr_vns_he;
+       s8 ant_pwr_vns_ht_vht;
+       s8 ant_pwr_vns_ofdm;
+       s8 ant_pwr_vns_cck;
+       /* Auto response */
+       s8 pwr_auto_resp_he[WRS_MCS_MAX_HE];
+       s8 pwr_auto_resp_ht_vht[WRS_MCS_MAX_VHT];
+       s8 pwr_auto_resp_ofdm[WRS_MCS_MAX_OFDM];
+       s8 pwr_auto_resp_cck[WRS_MCS_MAX_CCK];
+       /* Auto response VNS */
+       s8 pwr_auto_resp_vns_he;
+       s8 pwr_auto_resp_vns_ht_vht;
+       s8 pwr_auto_resp_vns_ofdm;
+       s8 pwr_auto_resp_vns_cck;
+};
+
+struct cl_phy_data {
+       struct cl_pwr_tables pwr_tables;
+       struct cl_iq_dcoc_info iq_dcoc_db;
+       struct cl_agc_params agc_params;
+};
+
+struct reg_offset_val {
+       __le16 addr_offset;
+       __le32 val;
+};
+
+struct cl_antenna_config {
+       /* Number of antennas */
+       u8 num_tx_he;
+       u8 num_tx_ofdm_ht_vht;
+       u8 num_rx;
+       /* Mask of antennas */
+       u8 mask_tx_he;
+       u8 mask_tx_ofdm_ht_vht;
+       u8 mask_rx;
+       /* CCK mask */
+       u8 mask_tx_cck;
+       u8 mask_rx_cck;
+       /* CDB_mask 0x0 -> SX0 chain. 0x1-> SX1 chain. */
+       u8 cdb_mask;
+};
+
+struct cl_fem_config {
+       u32 reg[FEM_REGISTERS_AMOUNT];
+};
+
+struct cl_cca_config {
+       u8 ed_rise_thr_dbm;
+       u8 ed_fall_thr_dbm;
+       u8 cs_en;
+       u8 modem_en;
+       u8 main_ant;
+       u8 second_ant;
+       u8 flag0_ctrl;
+       u8 flag1_ctrl;
+       u8 flag2_ctrl;
+       u8 flag3_ctrl;
+       u8 gi_rise_thr_dbm;
+       u8 gi_fall_thr_dbm;
+       u8 gi_pow_lim_dbm;
+       u16 ed_en;
+       u8 gi_en;
+};
+
+/* Structure containing the parameters of the PHY configuration */
+struct cl_phy_cfg {
+       struct cl_cca_config cca_config;
+       struct cl_antenna_config ant_config;
+       struct cl_fem_config fem_conf;
+       u8 first_start;
+       u8 channel_bandwidth;
+       u8 band; /* 0 = 2.4g / 1 = 5g / 2 = 6g */
+       u16 freq_offset;
+       u8 rx_sensitivity[MAX_ANTENNAS];
+       u8 vns_tx_power_mode;
+       u8 vns_rssi_suto_resp_th;
+       u8 afe_config_en;
+       u8 no_capture_noise_sleep;
+       u8 ht_rxldpc_en;
+       u8 gain_update_enable;
+       u8 mcs_sig_b;
+       u8 ofdm_only;
+       u8 hr_factor;
+       u8 td_csd_en;
+       u8 pe_duration_bcast;
+       u32 tx_digital_gain;
+       u32 tx_digital_gain_cck;
+       u8 ofdm_cck_power_offset;
+       u8 phy_clk_gating_en;
+       u8 tcv1_chains_sx0;
+};
+
+enum {
+       CENX_CFG_DEBUG_PRINT,
+       CENX_CFG_INT_FRAME,
+       CENX_CFG_CE_TX_CFM,
+       CENX_CFG_LMAC_SEQNUM,
+       CENX_CFG_DBG_COUNTERS,
+       CENX_CFG_RHD_LL_SPLIT,
+       CENX_CFG_RX_HDR_SPLIT,
+       CENX_CFG_CYC_BUF,
+       CENX_CFG_DEBUG_TRACE,
+       CENX_RX_CLASSIFICATION,
+       CENX_RX_IMP_BF,
+       CENX_CSI_SUPPORT,
+       CENX_NATT_DBG,
+       CENX_GRP_MGMT_FRAME,
+       CENX_GRP_MGMT_FRAME_RX,
+       CENX_MU_GROUP,
+       CENX_CFG_MAX
+};
+
+#define IPC_TXQ_CNT  5
+
+/* MM_START_REQ parameters */
+struct cl_start_param {
+       __le32 comp_flags;
+       __le16 cfm_size;
+       __le32 cfm_dma_base_addr;
+       __le16 phy_dev;
+       __le16 fw_scale_down;
+       __le16 dbg_test_mode_max;
+       struct {
+               __le32 idle;
+               __le32 ac0;
+               __le32 ac1;
+               __le32 ac2;
+               __le32 ac3;
+               __le32 bcn;
+       } hal_timeout;
+       /*
+        * this is the pointer to the dma base address of the host struct
+        * that hold all the dma addresses of the ipc host queues
+        */
+       __le32 ipc_host_tx_queues_dma_addr;
+       /* Address of RX buffer in host RAM */
+       __le32 host_rxbuf_base_addr[CL_RX_BUF_MAX];
+       /* Address of HOST indices */
+       __le32 ipc_ring_indices_base;
+       u8 prot_log_nav_en;
+       u8 prot_mode;
+       u8 prot_rate_format;
+       u8 prot_rate_mcs;
+       u8 prot_rate_pre_type;
+       u8 bw_signaling_mode;
+       u8 mult_ampdu_in_txop_en;
+       u8 preemptive_backoff_en;
+       __le32 cca_timeout;
+       u8 short_retry_limit;
+       u8 long_retry_limit;
+       u8 assoc_auth_retry_limit;
+       __le16 bcn_tx_path_min_time;
+       u8 backup_bcn_en;
+       u8 tx_txop_cut_en;
+       u8 ps_ctrl_enabled;
+       u8 ac_with_bcns_flushed_cnt_thr;
+       __le32 txl_statistics_struct_size;
+       __le32 rxl_statistics_struct_size;
+       struct dbg_meta_data dbg_metadata;
+       u8 phy_err_prevents_phy_dump;
+       u8 tx_rx_delay;
+       u8 assert_storm_detect_thd;
+       u8 assert_time_diff_sec;
+       __le16 ipc_rxbuf_size[CL_RX_BUF_MAX];
+       __le32 ipc_rxbuf_extra_headroom;
+       u8 host_pci_gen_ver;
+       u8 dma_lli_max_chan[2];
+       u8 production_mode;
+       u8 bw_factor_q2[CHNL_BW_MAX];
+       u8 ant_factor_q2[MAX_ANTENNAS];
+       u8 min_ant_pwr_q1;
+       struct {
+               u8 auto_resp_all  : 2;
+               u8 auto_resp_msta : 2;
+               u8 rsv            : 4;
+       } default_distance;
+       __le32 phy_data_dma_addr;
+       __le32 phy_remote_rom_dma_addr;
+       __le32 iq_dcoc_calib_tables_dma_addr;
+       __le32 power_table_dma_addr;
+       __le32 tf_info_dma_addr;
+       u8 su_force_min_spacing_usec;
+       u8 mu_force_min_spacing_usec;
+       u8 force_tcv0_only;
+       u8 rx_padding;
+       u8 bar_cap_disable;
+       u8 hw_bsr;
+       u8 drop_to_lower_bw;
+       u8 dra_enable;
+       u8 mac_clk_gating_en;
+       u8 imaging_blocker;
+       u8 fec_coding;
+       u8 cs_required;
+       u8 first_tcv;
+};
+
+struct cl_tx_params {
+       __le32 rate;
+       __le32 rate_he;
+       u8 req_bw_tx;
+       u8 ant_set;
+       u8 ltf;
+};
+
+struct cl_rx_params {
+       u8 format;
+       u8 mcs;
+       u8 nss;
+};
+
+struct mm_update_rate_dl_req {
+       u8 op_mode;
+       u8 sta_idx;
+       u8 mu_is_rate_valid;
+       u8 group_id;
+       struct cl_tx_params tx_params;
+       __le32 rate_fallback;
+       u8 ltf_fallback;
+};
+
+struct mm_set_ant_pwr_offset_req {
+       /* Power offset (0.25dB resoultion) */
+       u8 pwr_offset[MAX_ANTENNAS];
+};
+
+struct mm_rate_fallback_req {
+       u8 fallback_count_su;
+       u8 fallback_count_mu;
+       u8 ba_per_thr;
+       u8 ba_not_received_thr;
+       u8 retry_count_thr;
+       u8 disable_mcs0;
+};
+
+struct mm_set_vns_req {
+       u8 sta_idx;
+       u8 is_vns;
+};
+
+struct mm_set_tx_bf_req {
+       u8 sta_idx;
+       u8 is_on;
+       u8 is_on_fallback;
+};
+
+/* Structure containing the parameters of the MM_START_REQ message */
+struct mm_start_req {
+       /* PHY configuration */
+       struct cl_phy_cfg phy_cfg;
+       /* Other start parameters */
+       struct cl_start_param param;
+};
+
+struct mm_mac_api_lut_line {
+       __le16 frequency_q2;
+       union {
+               struct {
+                       struct {
+                               u8 vcocalsel;
+                               u8 nint;
+                               __le32 nfrac;
+                               __le32 freqmeastarg;
+                       } xco_40M;
+                       struct {
+                               u8 vcocalsel;
+                               u8 nint;
+                               __le32 nfrac;
+                               __le32 freqmeastarg;
+                       } xco_60M;
+               } olympus_2_lines;
+               struct {
+                       struct {
+                               u8 vcocalsel;
+                               u8 nint;
+                               __le32 nfrac;
+                               __le32 freqmeastarg;
+                       } xco_40M;
+                       struct {
+                               u8 vcocalsel;
+                               u8 nint;
+                               __le32 nfrac;
+                               __le32 freqmeastarg;
+                       } xco_60M_s0;
+                       struct {
+                               u8 vcocalsel;
+                               u8 nint;
+                               __le32 nfrac;
+                               __le32 freqmeastarg;
+                       } xco_60M_s1;
+               } olympus_3_lines;
+       } rfic_specific;
+};
+
+struct cl_calib_other_tcv {
+       /* Parameters for calibration */
+       __le16 prim20_freq;
+       struct mm_mac_api_lut_line center1_freq_lut;
+       /* Parameter to restore previous configuration of other TCV */
+       u8 mask_tx_he;
+       u8 num_tx_he;
+       u8 band;
+};
+
+struct cl_calib_conf {
+       u8 initial_rx_gain;
+       u8 initial_tx_gain;
+       u8 rx_gain_upper_limit;
+       u8 rx_gain_lower_limit;
+       __le16 nco_freq;
+       s8 nco_amp;
+       u8 sleeve_trshld;
+       u8 n_samples_exp_lolc;
+       u8 n_samples_exp_iqc;
+       __le32 p_thresh;
+       u8 n_bit_fir_scale;
+       u8 n_bit_amp_scale;
+       u8 n_bit_phase_scale;
+       __le16 tone_vector[IQ_NUM_TONES_REQ];
+       __le32 gp_rad_trshld;
+       __le32 ga_lin_upper_trshld;
+       __le32 ga_lin_lower_trshld;
+       u8 comp_filter_len;
+       u8 singletons_num;
+       u8 tones_num;
+       __le16 rampup_time;
+       __le16 lo_coarse_step;
+       __le16 lo_fine_step;
+};
+
+struct cl_calib_param {
+       u8 mode;
+       u8 dcoc_max_vga;
+       u8 ant_tx_pairs[MAX_ANTENNAS];
+       u8 ant_rx_pairs[MAX_ANTENNAS];
+       struct cl_calib_conf conf;
+       struct cl_calib_other_tcv other_tcv;
+};
+
+/* Structure containing the parameters of the MM_SET_CHANNEL_REQ message */
+struct mm_set_channel_req {
+       /* Band (2.4GHz or 5GHz) */
+       u8 band;
+       /* Channel type: 20,40,80 or 160 MHz */
+       u8 bandwidth;
+       /* Frequency for Primary 20MHz channel (in MHz) */
+       __le16 prim20_freq;
+       /* Frequency for Center of the contiguous channel or center of Primary 80+80 */
+       struct mm_mac_api_lut_line center1_freq_lut;
+       /* Antenna configuration */
+       struct cl_antenna_config ant_config;
+       /* FEM configuration */
+       struct cl_fem_config fem_conf;
+       u8 calib_info_set;
+       /* Calibration configuration */
+       struct cl_calib_param calib_param;
+       /* Antenna power offset */
+       u8 ant_pwr_offset[MAX_ANTENNAS];
+       /*
+        * Frequency offset in MHz between current synthesizer's center channel,
+        * and the other synthesizer's channel.
+        * Needed for LOLC and IQC Calibration. Otherwise, shouldn't be used.
+        */
+       s8 sx_freq_offset_mhz;
+       /* Hr factor */
+       u8 hr_factor;
+       /* Signal extension enable (for 2.4G sifs10 mode), should be 1 for 2,4 band by default */
+       u8 signal_ext;
+};
+
+enum mm_ext_calib_command {
+       MM_EXT_CALIB_CMD_INIT_SX,
+       MM_EXT_CALIB_CMD_SET_CHANNEL,
+       MM_EXT_CALIB_CMD_INIT_AND_SET_CHANNEL,
+       MM_EXT_CALIB_CMD_MAX
+};
+
+struct mm_ext_calib_init_sx_req {
+       u8 band;
+       u8 cdb_mask;
+       u8 mask_tx_he;
+       u8 num_tx_he;
+       u8 sx_idx;
+};
+
+struct mm_ext_calib_set_channel_req {
+       u8 band;
+       u8 bandwidth;
+       __le16 prim20_freq;
+       struct mm_mac_api_lut_line center1_freq_lut;
+       u8 sx_idx;
+};
+
+struct mm_ext_calib_init_and_set_req {
+       u8 band;
+       u8 cdb_mask;
+       u8 bandwidth;
+       __le16 prim20_freq;
+       struct mm_mac_api_lut_line center1_freq_lut;
+       __le16 remote_prim20_freq;
+       struct mm_mac_api_lut_line remote_center1_freq_lut;
+};
+
+union mm_ext_calib_cmd_req {
+       struct mm_ext_calib_init_sx_req init_sx;
+       struct mm_ext_calib_set_channel_req set_channel;
+       struct mm_ext_calib_init_and_set_req init_and_set;
+};
+
+struct mm_ext_calib_req {
+       u8 cmd;
+       union mm_ext_calib_cmd_req u;
+};
+
+/* Structure containing the parameters of the MM_GOTO_POWER_REDUCTION_REQ message */
+struct mm_goto_power_reduction_req {
+       u8 goto_power_reduction_mode;
+};
+
+/* Structure containing the parameters of the MM_FREQ_UPDATE_REQ message */
+struct mm_freq_update_req {
+       u16 freq;
+};
+
+/* Structure containing the parameters of the MM_SET_DTIM_REQ message */
+struct mm_set_dtim_req {
+       u8 dtim_period;
+};
+
+/* Structure containing the parameters of the MM_SET_BEACON_INT_REQ message */
+struct mm_set_beacon_int_req {
+       __le16 beacon_int;
+       /* Index of the interface */
+       u8 inst_nbr;
+};
+
+/* Structure containing the parameters of the MM_SET_BASIC_RATES_REQ message */
+struct mm_set_basic_rates_req {
+       /* Basic rate set (as expected by bssBasicRateSet field of Rates MAC HW register) */
+       __le32 rates;
+};
+
+/* Structure containing the parameters of the MM_SET_BSSID_REQ message */
+struct mm_set_bssid_req {
+       /* BSSID to be configured in HW */
+       struct mac_addr bssid;
+       /* Index of the interface for which the parameter is configured */
+       u8 inst_nbr;
+};
+
+/* Structure containing the parameters of the MM_SET_FILTER_REQ message */
+struct mm_set_filter_req {
+       __le32 filter;
+};
+
+/* Structure containing the parameters of the MM_ADD_IF_REQ message. */
+struct mm_add_if_req {
+       u8 type;
+       struct mac_addr addr;
+       u8 inst_nbr;
+       u8 tx_strip_vlan;
+       u8 rx_push_vlan;
+       __le32 rx_push_vlan_tag;
+       __le32 rx_filter_monitor_mask;
+       __le32 mac_addr_hi_mask;
+       __le32 mac_addr_low_mask;
+       u8 start_dtim_count;
+       u8 mbssid_mode;
+};
+
+/* Structure containing the parameters of the MM_SET_EDCA_REQ message */
+struct mm_set_edca_req {
+       __le32 ac_param;
+       u8 hw_queue;
+       u8 mu_edca_aifsn;
+       u8 mu_edca_ecw_min_max;
+       u8 mu_edca_timer;
+};
+
+struct mm_config_cca_req {
+       u8 enable;
+};
+
+struct mm_set_dfs_req {
+       bool enable;
+       bool standard_fcc;
+       u8 initial_gain;
+       u8 agc_cd_th;
+};
+
+struct mm_set_ant_bitmap_req {
+       struct cl_antenna_config ant_config;
+};
+
+struct mm_ndp_tx_control_req {
+       u8 chain_mask;
+       u8 bw;
+       u8 format;
+       u8 num_ltf;
+};
+
+struct mm_reg_write_req {
+       __le32 address;
+       __le32 value;
+       __le32 mask;
+};
+
+struct mm_prot_mode_req {
+       u8 log_nav_en;
+       u8 mode;
+       u8 rate_format;
+       u8 rate_mcs;
+       u8 rate_pre_type;
+};
+
+struct mm_bw_signaling_mode_req {
+       u8 mode;
+};
+
+enum mac_idle_cmd {
+       MAC_ACTIVE = 0,
+       MAC_IDLE_SYNC,
+       MAC_IDLE_ASYNC
+};
+
+struct mm_set_idle_req {
+       u8 hw_idle;
+};
+
+/* Structure containing the parameters of the MM_SET_SLOTTIME_REQ message */
+struct mm_set_slottime_req {
+       /* Slot time expressed in us */
+       u8 slottime;
+};
+
+/* Structure containing the parameters of the MM_SET_ASSOCIATED_REQ message */
+struct mm_set_associated_req {
+       /* Association Id received from the AP */
+       __le16 aid;
+       /* Mask address high - [47:32] */
+       __le32 bssid_hi_mask;
+       /* Mask address low - [31:0] */
+       __le32 bssid_low_mask;
+};
+
+/* Structure containing the parameters of the MM_ADD_IF_CFM message. */
+struct mm_add_if_cfm {
+       /* Status of operation (different from 0 if unsuccessful) */
+       u8 status;
+};
+
+/* Structure containing the parameters of the MM_REMOVE_IF_REQ message. */
+struct mm_remove_if_req {
+       /* Interface index assigned by the firmware */
+       u8 inst_nbr;
+};
+
+/* Structure containing the parameters of the MM_VERSION_CFM message. */
+struct mm_version_cfm {
+       struct {
+               __le32 dsp;
+               __le32 rfic_sw;
+               __le32 rfic_hw;
+               __le32 agcram;
+               char fw[CL_VERSION_STR_SIZE];
+       } versions;
+       u8 rf_crystal_mhz;
+};
+
+/* Structure containing the parameters of the MM_STA_ADD_REQ message. */
+struct mm_sta_add_req {
+       /* Exponent for calculating HE Maximum A-MPDU size */
+       u8 ampdu_size_exp_he;
+       /* Exponent for calculating VHT Maximum A-MPDU size */
+       u8 ampdu_size_exp_vht;
+       /* Exponent for calculating HT Maximum A-MPDU size */
+       u8 ampdu_size_exp_ht;
+       /* MAC address of the station to be added */
+       struct mac_addr mac_addr;
+       /* A-MPDU spacing, in us */
+       u8 ampdu_min_spacing;
+       /* Interface index */
+       u8 inst_nbr;
+       /* Support ldpc Tx */
+       u8 ldpc_enabled;
+       /* MU beamformee capable */
+       u8 mu_bfee;
+       /* SU beamformee capable */
+       u8 su_bfee;
+       /* Station AID */
+       __le16 aid;
+       /* My_aid - ??? */
+       __le16 my_aid;
+       /* Index of station in case of recovery */
+       u8 recovery_sta_idx;
+       u8 max_sp;
+       u8 uapsd_queues;
+       /* TX params */
+       struct cl_tx_params tx_params;
+       /*
+        * PE duration (0 = 0us, 1 = 8us, 2 = 16us)
+        * SS0 bits 0-1, SS1 bits 2-3, SS2 bits 4-5, SS3 bits 6-7.
+        */
+       u8 pe_duration[CHNL_BW_MAX][WRS_MCS_MAX_HE];
+       u8 he_tf_mac_padding_duration;
+       u8 he_rx_ctrl_frm_to_mbss;
+       u8 he_rx_1024qam_under_ru242;
+};
+
+/* Structure containing the parameters of the MM_STA_ADD_CFM message. */
+struct mm_sta_add_cfm {
+       /* Status of the operation (different from 0 if unsuccessful) */
+       u8 status;
+       /* Index assigned by the firmware to the newly added station */
+       u8 sta_idx;
+};
+
+/* Structure containing the parameters of the MM_STA_DEL_REQ message. */
+struct mm_sta_del_req {
+       u8 sta_idx;
+};
+
+/* Structure containing the parameters of the MM_STA_DEL_CFM message. */
+struct mm_sta_del_cfm {
+       /* Status of the operation (different from 0 if unsuccessful) */
+       u8 status;
+};
+
+/* Structure containing the parameters of the SET_POWER_MODE REQ message. */
+struct mm_setpowermode_req {
+       u8 mode;
+       u8 sta_idx;
+};
+
+/* Structure containing the parameters of the SET_POWER_MODE CFM message. */
+struct mm_setpowermode_cfm {
+       u8 status;
+};
+
+/* MAC Secret Key */
+#define MAC_SEC_KEY_LEN 32  /* TKIP keys 256 bits (max length) with MIC keys */
+
+struct mac_sec_key {
+       /* Key material length */
+       u8 length;
+       /* Key material */
+       u32 array[MAC_SEC_KEY_LEN / 4];
+};
+
+enum mac_cipher_suite {
+       MAC_CIPHER_SUITE_NULL,
+       MAC_CIPHER_SUITE_WEP40,
+       MAC_CIPHER_SUITE_TKIP,
+       MAC_CIPHER_SUITE_CCMP,
+       MAC_CIPHER_SUITE_WEP104,
+       MAC_CIPHER_SUITE_GCMP,
+
+       MAC_CIPHER_SUITE_MAX
+};
+
+/* Structure containing the parameters of the MM_KEY_ADD REQ message. */
+struct mm_key_add_req {
+       /* Key index (valid only for default keys) */
+       u8 key_idx;
+       /* STA index (valid only for pairwise keys) */
+       u8 sta_idx;
+       /* Key material */
+       struct mac_sec_key key;
+       /* Cipher suite */
+       u8 cipher_suite;
+       /* Index of the interface for which the key is set (valid only for default keys) */
+       u8 inst_nbr;
+       /* A-MSDU SPP parameter */
+       u8 spp;
+};
+
+/* Structure containing the parameters of the MM_KEY_ADD_CFM message. */
+struct mm_key_add_cfm {
+       /* Status of the operation (different from 0 if unsuccessful) */
+       u8 status;
+       /* HW index of the key just added */
+       u8 hw_key_idx;
+};
+
+/* Structure containing the parameters of the MM_KEY_DEL_REQ message. */
+struct mm_key_del_req {
+       u8 hw_key_idx;
+};
+
+/* Structure containing the parameters of the MM_BA_ADD_REQ message. */
+struct mm_ba_add_req {
+       /* Type of agreement (0: TX, 1: RX) */
+       u8 type;
+       /* Index of peer station with which the agreement is made */
+       u8 sta_idx;
+       /* TID for which the agreement is made with peer station */
+       u8 tid;
+       /* Buffer size - number of MPDUs that can be held in its buffer per TID */
+       __le16 bufsz;
+       /* Start sequence number negotiated during BA setup */
+       __le16 ssn;
+};
+
+/* Structure containing the parameters of the MM_BA_ADD_CFM message. */
+struct mm_ba_add_cfm {
+       /* Index of peer station for which the agreement is being confirmed */
+       u8 sta_idx;
+       /* TID for which the agreement is being confirmed */
+       u8 tid;
+       /* Status of ba establishment */
+       u8 status;
+       /* Aggregation index */
+       u8 agg_idx;
+       /* Number of descriptors the queue of session can hold */
+       u16 desc_cnt;
+};
+
+/* Structure containing the parameters of the MM_BA_DEL_REQ message. */
+struct mm_ba_del_req {
+       /* Index of peer station for which the agreement is being deleted */
+       u8 sta_idx;
+       /* TID for which the agreement is being deleted */
+       u8 tid;
+};
+
+/* Structure containing the parameters of the MM_BA_DEL_CFM message. */
+struct mm_ba_del_cfm {
+       /* Index of peer station for which the agreement deletion is being confirmed */
+       u8 sta_idx;
+       /* TID for which the agreement deletion is being confirmed */
+       u8 tid;
+       /* Status of ba deletion */
+       u8 status;
+};
+
+/* Structure containing the parameters of the MM_AVAILABLE_BA_TXQ_REQ message. */
+struct mm_available_ba_txq_req {
+       /* Index of peer station for which the agreement deletion is being confirmed */
+       u8 sta_idx;
+       /* TID for which the agreement deletion is being confirmed */
+       u8 tid;
+};
+
+/* Structure containing the parameters of the MM_AVAILABLE_BA_TXQ_CFM message. */
+struct mm_available_ba_txq_cfm {
+       /* Index of peer station for which the agreement deletion is being confirmed */
+       u8 sta_idx;
+       /* TID for which the agreement deletion is being confirmed */
+       u8 tid;
+       /* Status if ba txqueue available */
+       u8 status;
+};
+
+/* Structure containing the parameters of the MM_CONNECTION_LOSS_IND message. */
+struct mm_connection_loss_ind {
+       /* VIF instance number */
+       u8 inst_nbr;
+};
+
+/* Structure containing the parameters of the MM_PHY_RESET_CFM */
+struct mm_phy_reset_req {
+       /* PHY device: triding/elma/sdmb2b/sim */
+       u8 phy_reset;
+};
+
+struct sounding_info_per_sta {
+       u8 sta_idx;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+       u8 nc                 : 4, /* [3:0] NC of the STA */
+          fb_type_ng_cb_size : 3, /* [6:4] */
+          rsv1               : 1; /* [7] reserved */
+#else
+       u8 rsv1               : 1, /* [7] reserved */
+          fb_type_ng_cb_size : 3, /* [6:4] */
+          nc                 : 4; /* [3:0] NC of the STA */
+#endif
+};
+
+/* Information provided by application to firmware */
+struct mm_sounding_req {
+       struct sounding_info_per_sta info_per_sta[CL_MU_MAX_STA_PER_GROUP];
+       __le32 host_address;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+               /* [2:0] sounding type (HE-SU/HE-MU/HE_CQI/VHT-SU/VHT-MU) */
+       __le32  sounding_type        : 3,
+               /* [3:6] number of stations in the sounding sequence */
+               sta_num              : 4,
+               /* [7] start/stop sounding sequence */
+               start                : 1,
+               /* [19:8] life expectancy of BFR in ms */
+               lifetime             : 12,
+               /* [31:20] sounding interval. 0 means a single sounding */
+               interval             : 12;
+               /* [1:0] requested bw for the sounding sequence (BFR/NDP) */
+       u8      req_txbw             : 2,
+               /* [5:2] NSTS in the NDP frame */
+               ndp_nsts             : 4,
+               /* [7:6] reserved bits */
+               rsv1                 : 2;
+               /* [3:0] Bitmap of STAs to create SU Q-matrix for */
+       u8      q_matrix_bitmap      : 4,
+               /* [7:4] reserved bits */
+               rsv2                 : 4;
+#else
+               /* [31:20] sounding interval. 0 means a single sounding */
+       __le32  interval             : 12,
+               /* [19:8] life expectancy of BFR in ms */
+               lifetime             : 12,
+               /* [7] start/stop sounding sequence */
+               start                : 1,
+               /* [3:6] number of stations in the sounding sequence */
+               sta_num              : 4,
+               /* [2:0] sounding type (HE-SU/HE-MU/HE_CQI/VHT-SU/VHT-MU) */
+               sounding_type        : 3;
+               /* [7:6] reserved bits */
+       u8      rsv1                 : 2,
+               /* [5:2] NSTS in the NDP frame */
+               ndp_nsts             : 4,
+               /* [1:0] requested bw for the sounding sequence (BFR/NDP) */
+               req_txbw             : 2;
+               /* [7:4] reserved bits */
+       u8      rsv2                 : 4,
+               /* [3:0] Bitmap of STAs to create SU Q-matrix for */
+               q_matrix_bitmap      : 4;
+#endif
+       /* Sounding id. Used when deleting a sounding sequence */
+       u8 sid;
+};
+
+/* Application feedback for sounding request */
+struct mm_sounding_cfm {
+       u8 param_err;
+       u8 sounding_id;
+};
+
+struct mm_sounding_pairing {
+       u8 sounding_type;
+       u8 sounding_id;
+       u8 sta_idx;
+       u8 gid;
+};
+
+struct mm_sounding_interval_req {
+       __le16 interval;     /* Sounding interval */
+       __le16 bfr_lifetime; /* Life expectancy of BFR in ms */
+       u8 sounding_type;    /* Type of sounding (VHT/HT/SU/MU) */
+       u8 sta_idx;          /* Sta idx */
+};
+
+struct mm_sounding_interval_cfm {
+       u8 param_err;
+};
+
+/* Structure containing the parameters of the MM_BACKUP_BCN_EN_REQ message */
+struct mm_set_backup_bcn_en_req {
+       /* Backup beacon disable/enable */
+       bool backup_bcn_en;
+};
+
+/* Structure containing the parameters of the MM_START_PERIODIC_TX_TIME_REQ message */
+struct mm_start_periodic_tx_time_req {
+       u16 periodic_tx_time_off;
+       u16 periodic_tx_time_on;
+};
+
+enum ANAMON_MODE {
+       ANAMON_MODE_TEMPERATURE,
+       ANAMON_MODE_CHAINS,
+       ANAMON_MODE_SX
+};
+
+/* Structure containing the parameters of the MM_ANAMON_READ_REQ message */
+struct mm_anamon_read_req {
+       u8 mode;   /* 0 - Temperature, 1 - Chains, 2 - SX */
+       u8 param1; /* For mode = 0: 0 - Internal, 1 - External ; For mode = 1/2: Page number */
+       u8 param2; /* For mode = 5 bit value corresponding to mode selection */
+};
+
+struct mm_anamon_read_cfm {
+       u8 retval;
+       __le16 raw_bits_data_0;
+       __le16 raw_bits_data_1;
+};
+
+struct mm_twt_setup_req {
+       u64 twt_start_time_tsf;
+       u64 twt_interval_us;
+       u32 min_wake_duration_us;
+       u8 sta_idx;
+       u8 twt_flow_id;
+       u8 triggered;
+       u8 announced;
+};
+
+struct mm_twt_teardown_req {
+       u8 sta_idx;
+       u8 twt_flow_id;
+};
+
+struct mm_set_freq_offset_req {
+       __le16 val;
+};
+
+/* +++++++++++++++++++++++++ Debug messages +++++++++++++++++++++++++ */
+
+/* Messages related to Debug Task */
+enum dbg_msg_tag {
+       /* Set module filter message */
+       DBG_SET_MOD_FILTER_REQ = FIRST_MSG(TASK_DBG),
+       DBG_SET_MOD_FILTER_CFM,
+       /* Set module filter message */
+       DBG_CE_SET_MOD_FILTER_REQ,
+       DBG_CE_SET_MOD_FILTER_CFM,
+       /* Set severity filter message */
+       DBG_SET_SEV_FILTER_REQ,
+       DBG_SET_SEV_FILTER_CFM,
+       /* Beamforming TX message */
+       DBG_BEAMFORMING_TX_REQ,
+       DBG_BEAMFORMING_TX_CFM,
+       /* Get ETH2WLAN statistics message */
+       DBG_GET_E2W_STATS_REQ,
+       DBG_GET_E2W_STATS_CFM,
+       /* Set LA MPIF mask message */
+       DBG_SET_LA_MPIF_MASK_REQ,
+       DBG_SET_LA_MPIF_MASK_CFM,
+       /* Set LA trigger point message */
+       DBG_SET_LA_TRIG_POINT_REQ,
+       DBG_SET_LA_TRIG_POINT_CFM,
+       /* Set LA MPIF debug mode message */
+       DBG_SET_LA_MPIF_DEBUG_MODE_REQ,
+       DBG_SET_LA_MPIF_DEBUG_MODE_CFM,
+       /* Set LA trigger rule message */
+       DBG_SET_LA_TRIG_RULE_REQ,
+       DBG_SET_LA_TRIG_RULE_CFM,
+       /* TX trace dump debug flag message */
+       DBG_TX_TRACE_DEBUG_FLAG_REQ,
+       DBG_TX_TRACE_DEBUG_FLAG_CFM,
+       /* Print statistics message */
+       DBG_PRINT_STATS_REQ,
+       DBG_PRINT_STATS_CFM,
+       /* Trigger the embedded logic analyzer message */
+       DBG_TRIGGER_REQ,
+       DBG_TRIGGER_CFM,
+       /* Test mode message */
+       DBG_TEST_MODE_REQ,
+       DBG_TEST_MODE_CFM,
+       /* Sounding command message */
+       DBG_SOUNDING_CMD_REQ,
+       DBG_SOUNDING_CMD_CFM,
+
+       DBG_REQ_CFM_MAX,
+
+       /* Print request */
+       DBG_PRINT_IND = DBG_REQ_CFM_MAX,
+       /* Information indication */
+       DBG_INFO_IND,
+       /* Max number of debug messages */
+       DBG_MAX,
+};
+
+/* Structure containing the parameters of the MM_DBG_TRIGGER_REQ message. */
+struct dbg_trigger_req {
+       /* Error trace to be reported by the firmware */
+       char error[64];
+};
+
+/* Structure containing the parameters of the DBG_SET_MOD_FILTER_REQ message. */
+struct dbg_set_mod_filter_req {
+       /* Bit field indicating for each module if the traces are enabled or not */
+       __le32 mod_filter;
+};
+
+/* Structure containing the parameters of the DBG_SEV_MOD_FILTER_REQ message. */
+struct dbg_set_sev_filter_req {
+       /* Bit field indicating the severity threshold for the traces */
+       __le32 sev_filter;
+};
+
+/* Beam forming debug sequence request */
+struct dbg_beamforming_tx_req {
+       __le32 bf_cmd;
+};
+
+/* Beamforming command parameters (debugFS interface) */
+struct dbg_fs_bf_args {
+       __le32 sta_idx     : 8;
+       __le32 antenna_set : 8;
+       __le32 is_mu       : 1; /* SU-0, MU-1 */
+       __le32 is_enable   : 1;
+       __le32 interval    : 10;
+       __le32 cmd         : 4;
+};
+
+struct dbg_frame_rate {
+       __le32 mcs          : 7;
+       __le32 bw           : 2;
+       __le32 gi           : 1;
+       __le32 pretypetxrcx : 1;
+       __le32 format       : 3;
+       __le32 reserved     : 14;
+       __le32 cmd          : 4;
+};
+
+/* Statistics print request. */
+struct dbg_print_stats_req {
+       __le32 command;
+       __le32 param[4];
+};
+
+/* Must be aligned with FW (dbg.h) */
+enum dbg_test_mode {
+       DBG_TEST_MODE_HELP = 0,
+       DBG_TEST_MODE_ASSERT_REC,
+       DBG_TEST_MODE_ERR_CORRECT_MODE,
+       DBG_TEST_MODE_PRESILICON_TESTS,
+       DBG_TEST_MODE_TRIGGER_BA_NOT_RECEIVED,
+       DBG_TEST_MODE_TRIGGER_ABOVE_BAW,
+       DBG_TEST_MODE_TRIGGER_BELOW_BAW,
+       DBG_TEST_MODE_TRIGGER_RETRY_LIMIT_REACHED,
+       DBG_TEST_MODE_DMA_DATA_PRINT,
+       DBG_TEST_MODE_SET_AGC_MEM,
+       DBG_TEST_MODE_FW_TRACE_MODE,
+       DBG_TEST_MODE_TX_POWER_DEBUG,
+       DBG_TEST_MODE_DCOC_IQ_MODE,
+       DBG_TEST_MODE_MACHW_STATE,
+       DBG_TEST_MODE_PHY_GLOBAL_RESET,
+       DBG_TEST_MODE_PHY_OLYMPUS_TXRX_MODE,
+       DBG_TEST_MODE_AFE_LOOPBACK_MODE,
+       DBG_TEST_MODE_MIN_SPACING_MODE,
+       DBG_TEST_MODE_DELAY_CHAIN,
+       DBG_TEST_MODE_ERR_DUMP_PRINT,
+       DBG_TEST_MODE_BW_SIG_PRINT,
+       DBG_TEST_MODE_RECOVER_BA_NOT_RECEIVED,
+       DBG_TEST_MODE_BAP_MODE,
+       DBG_TEST_MODE_DPHY_INJECT_RXERR,
+       DBG_TEST_MODE_RXM_RXVECTOR_PRINT,
+       DBG_TEST_MODE_STOP_CHAIN,
+       DBG_TEST_MODE_MAX_AGG_SIZE,
+       DBG_TEST_MODE_DISABLE_RECOVERY,
+       DBG_TEST_MODE_SET_NAV_DURATION,
+       DBG_TEST_MODE_SET_NAV_CLEAR,
+       DBG_TEST_MODE_DRA_GRP_LIMIT_SET,
+       DBG_TEST_MODE_DURATION_FROM_THD,
+       DBG_TEST_MODE_RIU_INT_EN,
+       DBG_TEST_MODE_MU_OF_1_USER,
+       DBG_TEST_MODE_FORCE_TRIGGER,
+       DBG_TEST_MODE_RECOVERY_DEBUG,
+       DBG_TEST_MODE_CHAIN_SUSPEND,
+       DBG_TEST_MODE_DSP_LCU_TRIG,
+       DBG_TEST_MODE_POWER_SAVE,
+       DBG_TEST_MODE_TRIGGER_RX_NOT_RECEIVED,
+       DBG_TEST_MODE_SNIFFER_MODE,
+       DBG_TEST_MODE_AGC_CAPTURE_NOISE,
+       DBG_TEST_MODE_TRIGGER_UNDERRUN,
+       DBG_TEST_MODE_TF_IN_AMPDU_EN,
+       DBG_TEST_MODE_MAX,
+};
+
+/* Number of input parameters to test mode */
+#define TEST_MODE_PARAM_MAX  5
+
+/* Statistics print request. */
+struct dbg_test_mode_req {
+       __le32 command;
+       __le32 params[TEST_MODE_PARAM_MAX];
+};
+
+#define SOUNDING_CMD_MAX_PARAMS 20
+
+/* Sounding cmd */
+struct dbg_sounding_cmd_param {
+       __le32 sounding_cmd_index;
+       __le32 param[SOUNDING_CMD_MAX_PARAMS];
+};
+
+/* ETH2WLAN statistics request DBG_GET_E2W_STATS_REQ message */
+struct dbg_e2w_stats_req {
+       /* Clear statistics after get */
+       __le32 clear;
+};
+
+/* ETH2WLAN software debug counters */
+struct dbg_e2w_counters {
+       /* Total number of module activations */
+       __le32 tx_ac_total[AC_MAX];
+       /* Number of Tx conversion errors */
+       __le32 tx_ac_convert_error[AC_MAX];
+       /* Number of incorrect THD frmlen errors */
+       __le32 tx_ac_thd_frmlen_error[AC_MAX];
+       /* Number of incorrect THD data-start or data-end pointer errors */
+       __le32 tx_ac_thd_ptr_error[AC_MAX];
+       /* Number of incorrect unique THD pattern errors */
+       __le32 tx_ac_thd_pattern_error[AC_MAX];
+       /* Number of module Tx errors */
+       __le32 tx_module_error;
+
+};
+
+/* ETH2WLAN statistics confirm DBG_GET_E2W_STATS_CFM message */
+struct dbg_e2w_stats_cfm {
+       struct dbg_e2w_counters cntrs;
+};
+
+/* Embedded LA MPIF mask set request message */
+struct dbg_set_la_mpif_mask_req {
+       __le32 mpif_mask;
+};
+
+/* Embedded LA Trigger Point set request message */
+struct dbg_set_la_trig_point_req {
+       __le32 trigger_point;
+};
+
+/* Embedded LA MPIF debug mode set request message */
+struct dbg_set_la_mpif_debug_mode_req {
+       u8 mode;
+};
+
+/* Structure containing the parameters of the DBG_TX_TRACE_DEBUG_FLAG_REQ message. */
+struct dbg_tx_trace_debug_flag_req {
+       /* Bitmap for enabling\disabling debug options */
+       __le32 bitmap;
+       /* "1" - write the bitmap to global var, "0" - read the global var */
+       u8 read_write_flag;
+};
+
+enum la_trig_oper {
+       LA_TRIG_OPER_EQ,
+       LA_TRIG_OPER_NOT_EQ,
+       LA_TRIG_OPER_GT,
+       LA_TRIG_OPER_GT_EQ,
+       LA_TRIG_OPER_LT,
+       LA_TRIG_OPER_LT_EQ,
+
+       /* Always keep this entry last */
+       LA_TRIG_OPER_MAX
+};
+
+struct dbg_set_la_trig_rule_req {
+       /* Rule index */
+       u8 rule_id;
+       /* Comparison operator */
+       u8 oper;
+       /* Rule enable/disable */
+       u8 enable;
+       /* Reserved */
+       u8 rsv;
+       /* Address to be checked */
+       u32 address;
+       /* Trigger value */
+       u32 value;
+       /* Trigger value mask (enable mask - only set bits are compared) */
+       u32 mask;
+       /* Duration in usec value must match for trigger */
+       u32 duration;
+};
+
+/* Information sent from firmware to host indicating the rx bfr variables */
+struct mm_sounding_ind {
+       /* Param that are application private, collected by host without local copy */
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+       u8 sounding_type : 3,
+          status        : 1,
+          fail_reason   : 4;
+       u8 mu            : 1,
+          rsv           : 7;
+#else
+       u8 fail_reason   : 4,
+          status        : 1,
+          sounding_type : 3;
+       u8 rsv           : 7,
+          mu            : 1;
+#endif
+       u8 sid;
+       u8 sta_idx;
+       u16 v_matrix_offset[CL_MU_MAX_STA_PER_GROUP];
+};
+
+/* Possible fw errors types */
+enum mm_fw_error_type {
+       MM_FW_ERROR_TYPE_MU_OFDMA_SLOW_SECONDARY,
+       MM_FW_ERROR_TYPE_MAX
+};
+
+/* Structure containing the parameters of the MM_FW_ERROR_IND message */
+struct mm_fw_error_ind {
+       u8 group_id;
+       u8 error_type;
+       u8 sta_inidices[CL_MU_MAX_STA_PER_GROUP];
+       u8 sta_num;
+};
+
+enum mm_agg_rx_status_type {
+       MM_AGG_RX_REPORT_STAT_OK,
+       MM_AGG_RX_REPORT_STAT_COLISION_WITH_COUNTER,
+       MM_AGG_RX_REPORT_STAT_COUNTER_LOST,
+       MM_AGG_RX_REPORT_STAT_NOT_RECEIVED,
+       MM_AGG_RX_REPORT_STAT_NOT_HE
+};
+
+#define MSG_TOTAL_REQ_CFM (MM_REQ_CFM_MAX + DBG_REQ_CFM_MAX)
+#define DBG_STR_SHIFT(id) ((id) - FIRST_MSG(TASK_DBG) + MM_REQ_CFM_MAX)
+#define MSG_ID_STR(id)    (((id) < MM_REQ_CFM_MAX) ? msg2str[id] : msg2str[DBG_STR_SHIFT(id)])
+
+extern const char *const msg2str[MSG_TOTAL_REQ_CFM];
+
+#endif /* _CL_FW_MSG_H */
--
2.30.0

________________________________
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any retransmission, dissemination, copying or other use of, or taking of any action in reliance upon this information is prohibited. If you received this in error, please contact the sender and delete the material from any computer. Nothing contained herein shall be deemed as a representation, warranty or a commitment by Celeno. No warranties are expressed or implied, including, but not limited to, any implied warranties of non-infringement, merchantability and fitness for a particular purpose.
________________________________