From: Alim Akhtar <alim.akhtar@samsung.com> To: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, robh+dt@kernel.org Cc: krzysztof.kozlowski@canonical.com, linux-samsung-soc@vger.kernel.org, Alim Akhtar <alim.akhtar@samsung.com> Subject: [PATCH v2 2/2] arm64: dts: exynos5433: Add cpu cache information Date: Tue, 22 Jun 2021 18:35:51 +0530 [thread overview] Message-ID: <20210622130551.67446-2-alim.akhtar@samsung.com> (raw) In-Reply-To: <20210622130551.67446-1-alim.akhtar@samsung.com> This patch adds cpu caches information to its dt nodes so that the same is available to userspace via sysfs. This SoC has 48/32 KB I/D cache for each A57 cores with 2MB L2 cache. And 32/32 KB I/D cache for each A53 cores with 256KB L2 cache. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> --- -Changes since v1: * addressed Krzysztof's review comments arch/arm64/boot/dts/exynos/exynos5433.dtsi | 70 ++++++++++++++++++++++ 1 file changed, 70 insertions(+) diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 18a912eee360..73aa0fa9b778 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -62,6 +62,13 @@ clock-names = "apolloclk"; operating-points-v2 = <&cluster_a53_opp_table>; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&cluster_a53_l2>; }; cpu1: cpu@101 { @@ -72,6 +79,13 @@ clock-frequency = <1300000000>; operating-points-v2 = <&cluster_a53_opp_table>; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&cluster_a53_l2>; }; cpu2: cpu@102 { @@ -82,6 +96,13 @@ clock-frequency = <1300000000>; operating-points-v2 = <&cluster_a53_opp_table>; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&cluster_a53_l2>; }; cpu3: cpu@103 { @@ -92,6 +113,13 @@ clock-frequency = <1300000000>; operating-points-v2 = <&cluster_a53_opp_table>; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&cluster_a53_l2>; }; cpu4: cpu@0 { @@ -104,6 +132,13 @@ clock-names = "atlasclk"; operating-points-v2 = <&cluster_a57_opp_table>; #cooling-cells = <2>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cluster_a57_l2>; }; cpu5: cpu@1 { @@ -114,6 +149,13 @@ clock-frequency = <1900000000>; operating-points-v2 = <&cluster_a57_opp_table>; #cooling-cells = <2>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cluster_a57_l2>; }; cpu6: cpu@2 { @@ -124,6 +166,13 @@ clock-frequency = <1900000000>; operating-points-v2 = <&cluster_a57_opp_table>; #cooling-cells = <2>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cluster_a57_l2>; }; cpu7: cpu@3 { @@ -134,6 +183,27 @@ clock-frequency = <1900000000>; operating-points-v2 = <&cluster_a57_opp_table>; #cooling-cells = <2>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cluster_a57_l2>; + }; + + cluster_a57_l2: l2-cache0 { + compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; + }; + + cluster_a53_l2: l2-cache1 { + compatible = "cache"; + cache-size = <0x40000>; + cache-line-size = <64>; + cache-sets = <256>; }; }; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Alim Akhtar <alim.akhtar@samsung.com> To: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, robh+dt@kernel.org Cc: krzysztof.kozlowski@canonical.com, linux-samsung-soc@vger.kernel.org, Alim Akhtar <alim.akhtar@samsung.com> Subject: [PATCH v2 2/2] arm64: dts: exynos5433: Add cpu cache information Date: Tue, 22 Jun 2021 18:35:51 +0530 [thread overview] Message-ID: <20210622130551.67446-2-alim.akhtar@samsung.com> (raw) In-Reply-To: <20210622130551.67446-1-alim.akhtar@samsung.com> This patch adds cpu caches information to its dt nodes so that the same is available to userspace via sysfs. This SoC has 48/32 KB I/D cache for each A57 cores with 2MB L2 cache. And 32/32 KB I/D cache for each A53 cores with 256KB L2 cache. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> --- -Changes since v1: * addressed Krzysztof's review comments arch/arm64/boot/dts/exynos/exynos5433.dtsi | 70 ++++++++++++++++++++++ 1 file changed, 70 insertions(+) diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 18a912eee360..73aa0fa9b778 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -62,6 +62,13 @@ clock-names = "apolloclk"; operating-points-v2 = <&cluster_a53_opp_table>; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&cluster_a53_l2>; }; cpu1: cpu@101 { @@ -72,6 +79,13 @@ clock-frequency = <1300000000>; operating-points-v2 = <&cluster_a53_opp_table>; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&cluster_a53_l2>; }; cpu2: cpu@102 { @@ -82,6 +96,13 @@ clock-frequency = <1300000000>; operating-points-v2 = <&cluster_a53_opp_table>; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&cluster_a53_l2>; }; cpu3: cpu@103 { @@ -92,6 +113,13 @@ clock-frequency = <1300000000>; operating-points-v2 = <&cluster_a53_opp_table>; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&cluster_a53_l2>; }; cpu4: cpu@0 { @@ -104,6 +132,13 @@ clock-names = "atlasclk"; operating-points-v2 = <&cluster_a57_opp_table>; #cooling-cells = <2>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cluster_a57_l2>; }; cpu5: cpu@1 { @@ -114,6 +149,13 @@ clock-frequency = <1900000000>; operating-points-v2 = <&cluster_a57_opp_table>; #cooling-cells = <2>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cluster_a57_l2>; }; cpu6: cpu@2 { @@ -124,6 +166,13 @@ clock-frequency = <1900000000>; operating-points-v2 = <&cluster_a57_opp_table>; #cooling-cells = <2>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cluster_a57_l2>; }; cpu7: cpu@3 { @@ -134,6 +183,27 @@ clock-frequency = <1900000000>; operating-points-v2 = <&cluster_a57_opp_table>; #cooling-cells = <2>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cluster_a57_l2>; + }; + + cluster_a57_l2: l2-cache0 { + compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; + }; + + cluster_a53_l2: l2-cache1 { + compatible = "cache"; + cache-size = <0x40000>; + cache-line-size = <64>; + cache-sets = <256>; }; }; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-06-22 13:05 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top [not found] <CGME20210622130203epcas5p48a3111fc6586b1bfe0bd3cb90f783ce0@epcas5p4.samsung.com> 2021-06-22 13:05 ` [PATCH v2 1/2] arm64: dts: exynos7: Add cpu cache information Alim Akhtar 2021-06-22 13:05 ` Alim Akhtar [not found] ` <CGME20210622130204epcas5p1192cd38abc4a0b49798355cecea9f763@epcas5p1.samsung.com> 2021-06-22 13:05 ` Alim Akhtar [this message] 2021-06-22 13:05 ` [PATCH v2 2/2] arm64: dts: exynos5433: " Alim Akhtar 2021-06-23 6:08 ` [PATCH v2 1/2] arm64: dts: exynos7: " Krzysztof Kozlowski 2021-06-23 6:08 ` Krzysztof Kozlowski 2021-07-15 18:46 ` Krzysztof Kozlowski 2021-07-15 18:46 ` Krzysztof Kozlowski 2021-07-15 18:47 ` Krzysztof Kozlowski 2021-07-15 18:47 ` Krzysztof Kozlowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210622130551.67446-2-alim.akhtar@samsung.com \ --to=alim.akhtar@samsung.com \ --cc=krzysztof.kozlowski@canonical.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.