* [PATCH bpf 1/2] bpf: track subprog poke correctly, fix use-after-free
2021-06-30 19:40 [PATCH bpf 0/2] bpf, fix for subprogs with tailcalls John Fastabend
@ 2021-06-30 19:40 ` John Fastabend
2021-07-06 8:10 ` Daniel Borkmann
2021-06-30 19:40 ` [PATCH bpf 2/2] bpf: selftest to verify mixing bpf2bpf calls and tailcalls with insn patch John Fastabend
1 sibling, 1 reply; 4+ messages in thread
From: John Fastabend @ 2021-06-30 19:40 UTC (permalink / raw)
To: maciej.fijalkowski, ast, daniel, andriin; +Cc: john.fastabend, bpf, netdev
Subprograms are calling map_poke_track but on program release there is no
hook to call map_poke_untrack. But on prog release the aux memory is freed
even though we still have a reference to it in the element list of the
map aux data.
So when we run map_poke_run() we end up accessing free'd memory. This
triggers with KASAN in prog_array_map_poke_run() shown here.
[ 402.824686] ==================================================================
[ 402.824689] BUG: KASAN: use-after-free in prog_array_map_poke_run+0xc2/0x34e
[ 402.824698] Read of size 4 at addr ffff8881905a7940 by task hubble-fgs/4337
[ 402.824705] CPU: 1 PID: 4337 Comm: hubble-fgs Tainted: G I 5.12.0+ #399
[ 402.824715] Call Trace:
[ 402.824719] dump_stack+0x93/0xc2
[ 402.824727] print_address_description.constprop.0+0x1a/0x140
[ 402.824736] ? prog_array_map_poke_run+0xc2/0x34e
[ 402.824740] ? prog_array_map_poke_run+0xc2/0x34e
[ 402.824744] kasan_report.cold+0x7c/0xd8
[ 402.824752] ? prog_array_map_poke_run+0xc2/0x34e
[ 402.824757] prog_array_map_poke_run+0xc2/0x34e
[ 402.824765] bpf_fd_array_map_update_elem+0x124/0x1a0
The elements concerned are walked like this,
for (i = 0; i < elem->aux->size_poke_tab; i++) {
poke = &elem->aux->poke_tab[i];
So the access to size_poke_tab is the 4B read, verified by checking offsets
in the KASAN dump,
[ 402.825004] The buggy address belongs to the object at ffff8881905a7800
which belongs to the cache kmalloc-1k of size 1024
[ 402.825008] The buggy address is located 320 bytes inside of
1024-byte region [ffff8881905a7800, ffff8881905a7c00)
With pahol output,
struct bpf_prog_aux {
...
/* --- cacheline 5 boundary (320 bytes) --- */
u32 size_poke_tab; /* 320 4 */
...
In general subprograms do not manage their own data structures. For example
btf func_info, linfo, etc are just pointers to the prog structure. This
allows reference counting and cleanup to be done on the main prog.
The aux->poke_tab struct however did not follow this logic. The initial fix
for above use after free further embedded subprogram tracking of poke data
tracking into the subprogram with proper reference counting. However,
Daniel and Alexei questioned why we were treating these objects specially.
I agree its unnecessary.
The fix here removes the per subprogram poke data structure alloc and map
tracking and instead simply points the aux->poke_tab pointer at the main
programs poke_tab. This way map tracking is done on the origin program
and we do not need to manage them per subprogram. A couple small
complication arise here. First on bpf_prog_free_deferred(), where we unwind
the prog reference counting and kfree objects, we need to ensure that we
don't try to double free the poke_tab when free'ing the subprog structures.
This is easily solved by NULL'ing the poke_tab pointer.
The second detail is to ensure that per subprog jit logic only does fixups
on poke_tab[] entries it owns. To do this we add a pointer in the poke
structure to point at the subprog value so JITs can easily check while
walking the poke_tab structure if the current entry belongs to the current
program. This change is necessary per JIT. See x86/net/bpf_jit_compo.c func
bpf_tail_call_direct_fixup() for the details. Only x86 is currently using
the poke_tab struct so we only need to fixup the x86 JIT.
Fixes: a748c6975dea3 ("bpf: propagate poke descriptors to subprograms")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
---
arch/x86/net/bpf_jit_comp.c | 4 ++++
include/linux/bpf.h | 1 +
kernel/bpf/core.c | 7 ++++++-
kernel/bpf/verifier.c | 39 +++++++------------------------------
4 files changed, 18 insertions(+), 33 deletions(-)
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 2a2e290fa5d8..ce8dbc9310a9 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -576,6 +576,10 @@ static void bpf_tail_call_direct_fixup(struct bpf_prog *prog)
for (i = 0; i < prog->aux->size_poke_tab; i++) {
poke = &prog->aux->poke_tab[i];
+
+ if (poke->aux && poke->aux != prog->aux)
+ continue;
+
WARN_ON_ONCE(READ_ONCE(poke->tailcall_target_stable));
if (poke->reason != BPF_POKE_REASON_TAIL_CALL)
diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index 02b02cb29ce2..a7532cb3493a 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -777,6 +777,7 @@ struct bpf_jit_poke_descriptor {
void *tailcall_target;
void *tailcall_bypass;
void *bypass_addr;
+ void *aux;
union {
struct {
struct bpf_map *map;
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index 5e31ee9f7512..72810314c43b 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -2211,8 +2211,13 @@ static void bpf_prog_free_deferred(struct work_struct *work)
#endif
if (aux->dst_trampoline)
bpf_trampoline_put(aux->dst_trampoline);
- for (i = 0; i < aux->func_cnt; i++)
+ for (i = 0; i < aux->func_cnt; i++) {
+ /* poke_tab in subprogs are links to main prog and are
+ * freed above so delete link without kfree.
+ */
+ aux->func[i]->aux->poke_tab = NULL;
bpf_jit_free(aux->func[i]);
+ }
if (aux->func_cnt) {
kfree(aux->func);
bpf_prog_unlock_free(aux->prog);
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 6e2ebcb0d66f..daa5a3f5e7b8 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -12109,30 +12109,17 @@ static int jit_subprogs(struct bpf_verifier_env *env)
/* the btf and func_info will be freed only at prog->aux */
func[i]->aux->btf = prog->aux->btf;
func[i]->aux->func_info = prog->aux->func_info;
+ func[i]->aux->poke_tab = prog->aux->poke_tab;
+ func[i]->aux->size_poke_tab = prog->aux->size_poke_tab;
for (j = 0; j < prog->aux->size_poke_tab; j++) {
- u32 insn_idx = prog->aux->poke_tab[j].insn_idx;
- int ret;
+ struct bpf_jit_poke_descriptor *poke;
- if (!(insn_idx >= subprog_start &&
- insn_idx <= subprog_end))
- continue;
-
- ret = bpf_jit_add_poke_descriptor(func[i],
- &prog->aux->poke_tab[j]);
- if (ret < 0) {
- verbose(env, "adding tail call poke descriptor failed\n");
- goto out_free;
- }
+ poke = &prog->aux->poke_tab[j];
- func[i]->insnsi[insn_idx - subprog_start].imm = ret + 1;
-
- map_ptr = func[i]->aux->poke_tab[ret].tail_call.map;
- ret = map_ptr->ops->map_poke_track(map_ptr, func[i]->aux);
- if (ret < 0) {
- verbose(env, "tracking tail call prog failed\n");
- goto out_free;
- }
+ if (poke->insn_idx < subprog_end &&
+ poke->insn_idx >= subprog_start)
+ poke->aux = func[i]->aux;
}
/* Use bpf_prog_F_tag to indicate functions in stack traces.
@@ -12163,18 +12150,6 @@ static int jit_subprogs(struct bpf_verifier_env *env)
cond_resched();
}
- /* Untrack main program's aux structs so that during map_poke_run()
- * we will not stumble upon the unfilled poke descriptors; each
- * of the main program's poke descs got distributed across subprogs
- * and got tracked onto map, so we are sure that none of them will
- * be missed after the operation below
- */
- for (i = 0; i < prog->aux->size_poke_tab; i++) {
- map_ptr = prog->aux->poke_tab[i].tail_call.map;
-
- map_ptr->ops->map_poke_untrack(map_ptr, prog->aux);
- }
-
/* at this point all bpf functions were successfully JITed
* now populate all bpf_calls with correct addresses and
* run last pass of JIT
--
2.25.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH bpf 2/2] bpf: selftest to verify mixing bpf2bpf calls and tailcalls with insn patch
2021-06-30 19:40 [PATCH bpf 0/2] bpf, fix for subprogs with tailcalls John Fastabend
2021-06-30 19:40 ` [PATCH bpf 1/2] bpf: track subprog poke correctly, fix use-after-free John Fastabend
@ 2021-06-30 19:40 ` John Fastabend
1 sibling, 0 replies; 4+ messages in thread
From: John Fastabend @ 2021-06-30 19:40 UTC (permalink / raw)
To: maciej.fijalkowski, ast, daniel, andriin; +Cc: john.fastabend, bpf, netdev
This adds some extra noise to the tailcall_bpf2bpf4 tests that will cause
verify to patch insns. This then moves around subprog start/end insn
index and poke descriptor insn index to ensure that verify and JIT will
continue to track these correctly.
If done correctly verifier should pass this program same as before and
JIT should emit tail call logic.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
---
.../selftests/bpf/prog_tests/tailcalls.c | 36 +++++++++++++------
.../selftests/bpf/progs/tailcall_bpf2bpf4.c | 21 ++++++++++-
2 files changed, 46 insertions(+), 11 deletions(-)
diff --git a/tools/testing/selftests/bpf/prog_tests/tailcalls.c b/tools/testing/selftests/bpf/prog_tests/tailcalls.c
index ee27d68d2a1c..b5940e6ca67c 100644
--- a/tools/testing/selftests/bpf/prog_tests/tailcalls.c
+++ b/tools/testing/selftests/bpf/prog_tests/tailcalls.c
@@ -715,6 +715,8 @@ static void test_tailcall_bpf2bpf_3(void)
bpf_object__close(obj);
}
+#include "tailcall_bpf2bpf4.skel.h"
+
/* test_tailcall_bpf2bpf_4 checks that tailcall counter is correctly preserved
* across tailcalls combined with bpf2bpf calls. for making sure that tailcall
* counter behaves correctly, bpf program will go through following flow:
@@ -727,10 +729,15 @@ static void test_tailcall_bpf2bpf_3(void)
* the loop begins. At the end of the test make sure that the global counter is
* equal to 31, because tailcall counter includes the first two tailcalls
* whereas global counter is incremented only on loop presented on flow above.
+ *
+ * The noise parameter is used to insert bpf_map_update calls into the logic
+ * to force verifier to patch instructions. This allows us to ensure jump
+ * logic remains correct with instruction movement.
*/
-static void test_tailcall_bpf2bpf_4(void)
+static void test_tailcall_bpf2bpf_4(bool noise)
{
- int err, map_fd, prog_fd, main_fd, data_fd, i, val;
+ int err, map_fd, prog_fd, main_fd, data_fd, i;
+ struct tailcall_bpf2bpf4__bss val;
struct bpf_map *prog_array, *data_map;
struct bpf_program *prog;
struct bpf_object *obj;
@@ -774,11 +781,6 @@ static void test_tailcall_bpf2bpf_4(void)
goto out;
}
- err = bpf_prog_test_run(main_fd, 1, &pkt_v4, sizeof(pkt_v4), 0,
- &duration, &retval, NULL);
- CHECK(err || retval != sizeof(pkt_v4) * 3, "tailcall", "err %d errno %d retval %d\n",
- err, errno, retval);
-
data_map = bpf_object__find_map_by_name(obj, "tailcall.bss");
if (CHECK_FAIL(!data_map || !bpf_map__is_internal(data_map)))
return;
@@ -787,10 +789,22 @@ static void test_tailcall_bpf2bpf_4(void)
if (CHECK_FAIL(map_fd < 0))
return;
+ i = 0;
+ val.noise = noise;
+ val.count = 0;
+ err = bpf_map_update_elem(data_fd, &i, &val, BPF_ANY);
+ if (CHECK_FAIL(err))
+ goto out;
+
+ err = bpf_prog_test_run(main_fd, 1, &pkt_v4, sizeof(pkt_v4), 0,
+ &duration, &retval, NULL);
+ CHECK(err || retval != sizeof(pkt_v4) * 3, "tailcall", "err %d errno %d retval %d\n",
+ err, errno, retval);
+
i = 0;
err = bpf_map_lookup_elem(data_fd, &i, &val);
- CHECK(err || val != 31, "tailcall count", "err %d errno %d count %d\n",
- err, errno, val);
+ CHECK(err || val.count != 31, "tailcall count", "err %d errno %d count %d\n",
+ err, errno, val.count);
out:
bpf_object__close(obj);
@@ -815,5 +829,7 @@ void test_tailcalls(void)
if (test__start_subtest("tailcall_bpf2bpf_3"))
test_tailcall_bpf2bpf_3();
if (test__start_subtest("tailcall_bpf2bpf_4"))
- test_tailcall_bpf2bpf_4();
+ test_tailcall_bpf2bpf_4(false);
+ if (test__start_subtest("tailcall_bpf2bpf_5"))
+ test_tailcall_bpf2bpf_4(true);
}
diff --git a/tools/testing/selftests/bpf/progs/tailcall_bpf2bpf4.c b/tools/testing/selftests/bpf/progs/tailcall_bpf2bpf4.c
index 9a1b166b7fbe..6242803dabde 100644
--- a/tools/testing/selftests/bpf/progs/tailcall_bpf2bpf4.c
+++ b/tools/testing/selftests/bpf/progs/tailcall_bpf2bpf4.c
@@ -2,6 +2,13 @@
#include <linux/bpf.h>
#include <bpf/bpf_helpers.h>
+struct {
+ __uint(type, BPF_MAP_TYPE_ARRAY);
+ __uint(max_entries, 1);
+ __uint(key_size, sizeof(__u32));
+ __uint(value_size, sizeof(__u32));
+} nop_table SEC(".maps");
+
struct {
__uint(type, BPF_MAP_TYPE_PROG_ARRAY);
__uint(max_entries, 3);
@@ -9,11 +16,23 @@ struct {
__uint(value_size, sizeof(__u32));
} jmp_table SEC(".maps");
-static volatile int count;
+int count = 0;
+int noise = 0;
+
+__always_inline int subprog_noise(void)
+{
+ __u32 key = 0;
+
+ bpf_printk("hello noisy subprog %d\n", key);
+ bpf_map_lookup_elem(&nop_table, &key);
+ return 0;
+}
__noinline
int subprog_tail_2(struct __sk_buff *skb)
{
+ if (noise)
+ subprog_noise();
bpf_tail_call_static(skb, &jmp_table, 2);
return skb->len * 3;
}
--
2.25.1
^ permalink raw reply related [flat|nested] 4+ messages in thread