From: Drew Fustini <drew@beagleboard.org>
To: Rob Herring <robh+dt@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Michael Zhu <michael.zhu@starfivetech.com>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Fu Wei <tekkamanninja@gmail.com>,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-riscv@lists.infradead.org, devicetree@vger.kernel.org
Cc: Drew Fustini <drew@beagleboard.org>
Subject: [RFC PATH 0/2] gpio: starfive-jh7100: Add StarFive JH7100 GPIO bindings and driver
Date: Wed, 30 Jun 2021 17:20:37 -0700 [thread overview]
Message-ID: <20210701002037.912625-1-drew@beagleboard.org> (raw)
Add device tree bindings and driver for the GPIO controller in the
StarFive JH7100 SoC [1] used on the BeagleV Starlight JH7100 board [2].
The dts using "starfive,jh7100-gpio" is in StarFive's linux repo [3] and
is being cleaned up in preperation for submission.
[1] https://github.com/starfive-tech/beaglev_doc
[2] https://github.com/beagleboard/beaglev-starlight
[3] https://github.com/starfive-tech/linux/blob/beaglev/arch/riscv/boot/dts/starfive/jh7100.dtsi#L262
Drew Fustini (2):
dt-bindings: gpio: add starfive,jh7100-gpio bindings
gpio: starfive-jh7100: Add StarFive JH7100 GPIO driver
.../bindings/gpio/starfive,jh7100-gpio.yaml | 60 +++
MAINTAINERS | 8 +
drivers/gpio/Kconfig | 8 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-starfive-jh7100.c | 425 ++++++++++++++++++
5 files changed, 502 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/starfive,jh7100-gpio.yaml
create mode 100644 drivers/gpio/gpio-starfive-jh7100.c
--
2.27.0
WARNING: multiple messages have this Message-ID (diff)
From: Drew Fustini <drew@beagleboard.org>
To: Rob Herring <robh+dt@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Michael Zhu <michael.zhu@starfivetech.com>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Fu Wei <tekkamanninja@gmail.com>,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-riscv@lists.infradead.org, devicetree@vger.kernel.org
Cc: Drew Fustini <drew@beagleboard.org>
Subject: [RFC PATH 0/2] gpio: starfive-jh7100: Add StarFive JH7100 GPIO bindings and driver
Date: Wed, 30 Jun 2021 17:20:37 -0700 [thread overview]
Message-ID: <20210701002037.912625-1-drew@beagleboard.org> (raw)
Add device tree bindings and driver for the GPIO controller in the
StarFive JH7100 SoC [1] used on the BeagleV Starlight JH7100 board [2].
The dts using "starfive,jh7100-gpio" is in StarFive's linux repo [3] and
is being cleaned up in preperation for submission.
[1] https://github.com/starfive-tech/beaglev_doc
[2] https://github.com/beagleboard/beaglev-starlight
[3] https://github.com/starfive-tech/linux/blob/beaglev/arch/riscv/boot/dts/starfive/jh7100.dtsi#L262
Drew Fustini (2):
dt-bindings: gpio: add starfive,jh7100-gpio bindings
gpio: starfive-jh7100: Add StarFive JH7100 GPIO driver
.../bindings/gpio/starfive,jh7100-gpio.yaml | 60 +++
MAINTAINERS | 8 +
drivers/gpio/Kconfig | 8 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-starfive-jh7100.c | 425 ++++++++++++++++++
5 files changed, 502 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/starfive,jh7100-gpio.yaml
create mode 100644 drivers/gpio/gpio-starfive-jh7100.c
--
2.27.0
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next reply other threads:[~2021-07-01 0:22 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-01 0:20 Drew Fustini [this message]
2021-07-01 0:20 ` [RFC PATH 0/2] gpio: starfive-jh7100: Add StarFive JH7100 GPIO bindings and driver Drew Fustini
2021-07-01 0:20 ` [RFC PATH 1/2] dt-bindings: gpio: add starfive,jh7100-gpio bindings Drew Fustini
2021-07-01 0:20 ` Drew Fustini
2021-07-01 8:34 ` Geert Uytterhoeven
2021-07-01 8:34 ` [RFC PATH 1/2] dt-bindings: gpio: add starfive, jh7100-gpio bindings Geert Uytterhoeven
2021-07-02 20:56 ` [RFC PATH 1/2] dt-bindings: gpio: add starfive,jh7100-gpio bindings Drew Fustini
2021-07-02 20:56 ` Drew Fustini
2021-07-02 21:03 ` Geert Uytterhoeven
2021-07-02 21:03 ` [RFC PATH 1/2] dt-bindings: gpio: add starfive, jh7100-gpio bindings Geert Uytterhoeven
2021-07-03 6:46 ` [RFC PATH 1/2] dt-bindings: gpio: add starfive,jh7100-gpio bindings Drew Fustini
2021-07-03 6:46 ` Drew Fustini
2021-07-03 8:49 ` Geert Uytterhoeven
2021-07-03 8:49 ` [RFC PATH 1/2] dt-bindings: gpio: add starfive, jh7100-gpio bindings Geert Uytterhoeven
2021-07-01 0:20 ` [RFC PATH 2/2] gpio: starfive-jh7100: Add StarFive JH7100 GPIO driver Drew Fustini
2021-07-01 0:20 ` Drew Fustini
2021-07-01 2:25 ` Bin Meng
2021-07-01 2:25 ` Bin Meng
2021-07-01 20:44 ` Drew Fustini
2021-07-01 20:44 ` Drew Fustini
2021-07-01 6:39 ` Michael Walle
2021-07-01 6:39 ` Michael Walle
2021-07-01 20:33 ` Drew Fustini
2021-07-01 20:33 ` Drew Fustini
2021-07-02 14:59 ` Michael Walle
2021-07-02 14:59 ` Michael Walle
2021-07-02 21:00 ` Drew Fustini
2021-07-02 21:00 ` Drew Fustini
2021-07-23 21:04 ` Linus Walleij
2021-07-23 21:04 ` Linus Walleij
2021-07-26 7:11 ` Drew Fustini
2021-07-26 7:11 ` Drew Fustini
2021-07-26 7:21 ` Michael Walle
2021-07-26 7:21 ` Michael Walle
2021-07-27 5:28 ` Drew Fustini
2021-07-27 5:28 ` Drew Fustini
2021-07-28 9:49 ` Michael Walle
2021-07-28 9:49 ` Michael Walle
2021-07-28 10:59 ` Emil Renner Berthing
2021-07-28 10:59 ` Emil Renner Berthing
2021-07-28 11:19 ` Michael Walle
2021-07-28 11:19 ` Michael Walle
2021-07-28 11:21 ` Emil Renner Berthing
2021-07-28 11:21 ` Emil Renner Berthing
2021-07-01 18:25 ` kernel test robot
2021-07-02 16:03 ` Andy Shevchenko
2021-07-02 16:03 ` Andy Shevchenko
2021-07-02 21:06 ` Drew Fustini
2021-07-02 21:06 ` Drew Fustini
2021-07-05 13:29 ` Michael Walle
2021-07-05 13:29 ` Michael Walle
2021-07-05 14:33 ` Matti Vaittinen
2021-07-05 14:33 ` Matti Vaittinen
2021-07-15 1:49 ` Ley Foon Tan
2021-07-15 1:49 ` Ley Foon Tan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210701002037.912625-1-drew@beagleboard.org \
--to=drew@beagleboard.org \
--cc=bgolaszewski@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=geert@linux-m68k.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=michael.zhu@starfivetech.com \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
--cc=tekkamanninja@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.