[PATCH v2 net-next 0/3] net: stmmac: re-configure tas basetime after ptp time adjust

[PATCH v2 net-next 0/3] net: stmmac: re-configure tas basetime after ptp time adjust

[Xiaoliang Yang]

If the DWMAC Ethernet device has already set the Qbv EST configuration
before using ptp to synchronize the time adjustment, the Qbv base time
may change to be the past time of the new current time. This is not
allowed by hardware.

This patch calculates and re-configures the Qbv basetime after ptp time
adjustment.

v1->v2:
  Update est mutex lock to protect btr/ctr r/w to be atomic.
  Add btr_reserve to store basetime from qopt and used as origin base
time in Qbv re-configuration.

Xiaoliang Yang (3):
  net: stmmac: separate the tas basetime calculation function
  net: stmmac: add mutex lock to protect est parameters
  net: stmmac: ptp: update tas basetime after ptp adjust

 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |  3 ++
 .../net/ethernet/stmicro/stmmac/stmmac_ptp.c  | 41 ++++++++++++++++-
 .../net/ethernet/stmicro/stmmac/stmmac_tc.c   | 46 +++++++++++++------
 include/linux/stmmac.h                        |  1 +
 4 files changed, 77 insertions(+), 14 deletions(-)

-- 
2.17.1

[PATCH v2 net-next 0/3] net: stmmac: re-configure tas basetime after ptp time adjust

[Xiaoliang Yang]

If the DWMAC Ethernet device has already set the Qbv EST configuration
before using ptp to synchronize the time adjustment, the Qbv base time
may change to be the past time of the new current time. This is not
allowed by hardware.

This patch calculates and re-configures the Qbv basetime after ptp time
adjustment.

v1->v2:
  Update est mutex lock to protect btr/ctr r/w to be atomic.
  Add btr_reserve to store basetime from qopt and used as origin base
time in Qbv re-configuration.

Xiaoliang Yang (3):
  net: stmmac: separate the tas basetime calculation function
  net: stmmac: add mutex lock to protect est parameters
  net: stmmac: ptp: update tas basetime after ptp adjust

 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |  3 ++
 .../net/ethernet/stmicro/stmmac/stmmac_ptp.c  | 41 ++++++++++++++++-
 .../net/ethernet/stmicro/stmmac/stmmac_tc.c   | 46 +++++++++++++------
 include/linux/stmmac.h                        |  1 +
 4 files changed, 77 insertions(+), 14 deletions(-)

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 net-next 1/3] net: stmmac: separate the tas basetime calculation function

[Xiaoliang Yang]

Separate the TAS basetime calculation function so that it can be
called by other functions.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |  3 ++
 .../net/ethernet/stmicro/stmmac/stmmac_tc.c   | 38 ++++++++++++-------
 2 files changed, 28 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index b6cd43eda7ac..17cbf4b26b34 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -348,6 +348,9 @@ void stmmac_enable_rx_queue(struct stmmac_priv *priv, u32 queue);
 void stmmac_disable_tx_queue(struct stmmac_priv *priv, u32 queue);
 void stmmac_enable_tx_queue(struct stmmac_priv *priv, u32 queue);
 int stmmac_xsk_wakeup(struct net_device *dev, u32 queue, u32 flags);
+struct timespec64 stmmac_calc_tas_basetime(ktime_t old_base_time,
+					   ktime_t current_time,
+					   u64 cycle_time);
 
 #if IS_ENABLED(CONFIG_STMMAC_SELFTESTS)
 void stmmac_selftest_run(struct net_device *dev,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index 4e70efc45458..d7d448c5a72b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -713,6 +713,29 @@ static int tc_setup_cls(struct stmmac_priv *priv,
 	return ret;
 }
 
+struct timespec64 stmmac_calc_tas_basetime(ktime_t old_base_time,
+					   ktime_t current_time,
+					   u64 cycle_time)
+{
+	struct timespec64 time;
+
+	if (ktime_after(old_base_time, current_time)) {
+		time = ktime_to_timespec64(old_base_time);
+	} else {
+		s64 n;
+		ktime_t base_time;
+
+		n = div64_s64(ktime_sub_ns(current_time, old_base_time),
+			      cycle_time);
+		base_time = ktime_add_ns(old_base_time,
+					 (n + 1) * cycle_time);
+
+		time = ktime_to_timespec64(base_time);
+	}
+
+	return time;
+}
+
 static int tc_setup_taprio(struct stmmac_priv *priv,
 			   struct tc_taprio_qopt_offload *qopt)
 {
@@ -816,19 +839,8 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
 	/* Adjust for real system time */
 	priv->ptp_clock_ops.gettime64(&priv->ptp_clock_ops, &current_time);
 	current_time_ns = timespec64_to_ktime(current_time);
-	if (ktime_after(qopt->base_time, current_time_ns)) {
-		time = ktime_to_timespec64(qopt->base_time);
-	} else {
-		ktime_t base_time;
-		s64 n;
-
-		n = div64_s64(ktime_sub_ns(current_time_ns, qopt->base_time),
-			      qopt->cycle_time);
-		base_time = ktime_add_ns(qopt->base_time,
-					 (n + 1) * qopt->cycle_time);
-
-		time = ktime_to_timespec64(base_time);
-	}
+	time = stmmac_calc_tas_basetime(qopt->base_time, current_time_ns,
+					qopt->cycle_time);
 
 	priv->plat->est->btr[0] = (u32)time.tv_nsec;
 	priv->plat->est->btr[1] = (u32)time.tv_sec;
-- 
2.17.1

[PATCH v2 net-next 1/3] net: stmmac: separate the tas basetime calculation function

[Xiaoliang Yang]

Separate the TAS basetime calculation function so that it can be
called by other functions.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |  3 ++
 .../net/ethernet/stmicro/stmmac/stmmac_tc.c   | 38 ++++++++++++-------
 2 files changed, 28 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index b6cd43eda7ac..17cbf4b26b34 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -348,6 +348,9 @@ void stmmac_enable_rx_queue(struct stmmac_priv *priv, u32 queue);
 void stmmac_disable_tx_queue(struct stmmac_priv *priv, u32 queue);
 void stmmac_enable_tx_queue(struct stmmac_priv *priv, u32 queue);
 int stmmac_xsk_wakeup(struct net_device *dev, u32 queue, u32 flags);
+struct timespec64 stmmac_calc_tas_basetime(ktime_t old_base_time,
+					   ktime_t current_time,
+					   u64 cycle_time);
 
 #if IS_ENABLED(CONFIG_STMMAC_SELFTESTS)
 void stmmac_selftest_run(struct net_device *dev,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index 4e70efc45458..d7d448c5a72b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -713,6 +713,29 @@ static int tc_setup_cls(struct stmmac_priv *priv,
 	return ret;
 }
 
+struct timespec64 stmmac_calc_tas_basetime(ktime_t old_base_time,
+					   ktime_t current_time,
+					   u64 cycle_time)
+{
+	struct timespec64 time;
+
+	if (ktime_after(old_base_time, current_time)) {
+		time = ktime_to_timespec64(old_base_time);
+	} else {
+		s64 n;
+		ktime_t base_time;
+
+		n = div64_s64(ktime_sub_ns(current_time, old_base_time),
+			      cycle_time);
+		base_time = ktime_add_ns(old_base_time,
+					 (n + 1) * cycle_time);
+
+		time = ktime_to_timespec64(base_time);
+	}
+
+	return time;
+}
+
 static int tc_setup_taprio(struct stmmac_priv *priv,
 			   struct tc_taprio_qopt_offload *qopt)
 {
@@ -816,19 +839,8 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
 	/* Adjust for real system time */
 	priv->ptp_clock_ops.gettime64(&priv->ptp_clock_ops, &current_time);
 	current_time_ns = timespec64_to_ktime(current_time);
-	if (ktime_after(qopt->base_time, current_time_ns)) {
-		time = ktime_to_timespec64(qopt->base_time);
-	} else {
-		ktime_t base_time;
-		s64 n;
-
-		n = div64_s64(ktime_sub_ns(current_time_ns, qopt->base_time),
-			      qopt->cycle_time);
-		base_time = ktime_add_ns(qopt->base_time,
-					 (n + 1) * qopt->cycle_time);
-
-		time = ktime_to_timespec64(base_time);
-	}
+	time = stmmac_calc_tas_basetime(qopt->base_time, current_time_ns,
+					qopt->cycle_time);
 
 	priv->plat->est->btr[0] = (u32)time.tv_nsec;
 	priv->plat->est->btr[1] = (u32)time.tv_sec;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 net-next 2/3] net: stmmac: add mutex lock to protect est parameters

[Xiaoliang Yang]

Add a mutex lock to protect est structure parameters so that the
EST parameters can be updated by other threads.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 12 +++++++++++-
 include/linux/stmmac.h                          |  1 +
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index d7d448c5a72b..b2a276aac724 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -798,14 +798,18 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
 					 GFP_KERNEL);
 		if (!plat->est)
 			return -ENOMEM;
+
+		mutex_init(&priv->plat->est->lock);
 	} else {
 		memset(plat->est, 0, sizeof(*plat->est));
 	}
 
 	size = qopt->num_entries;
 
+	mutex_lock(&priv->plat->est->lock);
 	priv->plat->est->gcl_size = size;
 	priv->plat->est->enable = qopt->enable;
+	mutex_unlock(&priv->plat->est->lock);
 
 	for (i = 0; i < size; i++) {
 		s64 delta_ns = qopt->entries[i].interval;
@@ -836,6 +840,7 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
 		priv->plat->est->gcl[i] = delta_ns | (gates << wid);
 	}
 
+	mutex_lock(&priv->plat->est->lock);
 	/* Adjust for real system time */
 	priv->ptp_clock_ops.gettime64(&priv->ptp_clock_ops, &current_time);
 	current_time_ns = timespec64_to_ktime(current_time);
@@ -849,8 +854,10 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
 	priv->plat->est->ctr[0] = do_div(ctr, NSEC_PER_SEC);
 	priv->plat->est->ctr[1] = (u32)ctr;
 
-	if (fpe && !priv->dma_cap.fpesel)
+	if (fpe && !priv->dma_cap.fpesel) {
+		mutex_unlock(&priv->plat->est->lock);
 		return -EOPNOTSUPP;
+	}
 
 	/* Actual FPE register configuration will be done after FPE handshake
 	 * is success.
@@ -859,6 +866,7 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
 
 	ret = stmmac_est_configure(priv, priv->ioaddr, priv->plat->est,
 				   priv->plat->clk_ptp_rate);
+	mutex_unlock(&priv->plat->est->lock);
 	if (ret) {
 		netdev_err(priv->dev, "failed to configure EST\n");
 		goto disable;
@@ -874,9 +882,11 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
 	return 0;
 
 disable:
+	mutex_lock(&priv->plat->est->lock);
 	priv->plat->est->enable = false;
 	stmmac_est_configure(priv, priv->ioaddr, priv->plat->est,
 			     priv->plat->clk_ptp_rate);
+	mutex_unlock(&priv->plat->est->lock);
 
 	priv->plat->fpe_cfg->enable = false;
 	stmmac_fpe_configure(priv, priv->ioaddr,
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index e14a12df381b..c38b65aaf8c2 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -115,6 +115,7 @@ struct stmmac_axi {
 
 #define EST_GCL		1024
 struct stmmac_est {
+	struct mutex lock;
 	int enable;
 	u32 btr_offset[2];
 	u32 btr[2];
-- 
2.17.1

[PATCH v2 net-next 2/3] net: stmmac: add mutex lock to protect est parameters

[Xiaoliang Yang]

Add a mutex lock to protect est structure parameters so that the
EST parameters can be updated by other threads.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 12 +++++++++++-
 include/linux/stmmac.h                          |  1 +
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index d7d448c5a72b..b2a276aac724 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -798,14 +798,18 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
 					 GFP_KERNEL);
 		if (!plat->est)
 			return -ENOMEM;
+
+		mutex_init(&priv->plat->est->lock);
 	} else {
 		memset(plat->est, 0, sizeof(*plat->est));
 	}
 
 	size = qopt->num_entries;
 
+	mutex_lock(&priv->plat->est->lock);
 	priv->plat->est->gcl_size = size;
 	priv->plat->est->enable = qopt->enable;
+	mutex_unlock(&priv->plat->est->lock);
 
 	for (i = 0; i < size; i++) {
 		s64 delta_ns = qopt->entries[i].interval;
@@ -836,6 +840,7 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
 		priv->plat->est->gcl[i] = delta_ns | (gates << wid);
 	}
 
+	mutex_lock(&priv->plat->est->lock);
 	/* Adjust for real system time */
 	priv->ptp_clock_ops.gettime64(&priv->ptp_clock_ops, &current_time);
 	current_time_ns = timespec64_to_ktime(current_time);
@@ -849,8 +854,10 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
 	priv->plat->est->ctr[0] = do_div(ctr, NSEC_PER_SEC);
 	priv->plat->est->ctr[1] = (u32)ctr;
 
-	if (fpe && !priv->dma_cap.fpesel)
+	if (fpe && !priv->dma_cap.fpesel) {
+		mutex_unlock(&priv->plat->est->lock);
 		return -EOPNOTSUPP;
+	}
 
 	/* Actual FPE register configuration will be done after FPE handshake
 	 * is success.
@@ -859,6 +866,7 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
 
 	ret = stmmac_est_configure(priv, priv->ioaddr, priv->plat->est,
 				   priv->plat->clk_ptp_rate);
+	mutex_unlock(&priv->plat->est->lock);
 	if (ret) {
 		netdev_err(priv->dev, "failed to configure EST\n");
 		goto disable;
@@ -874,9 +882,11 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
 	return 0;
 
 disable:
+	mutex_lock(&priv->plat->est->lock);
 	priv->plat->est->enable = false;
 	stmmac_est_configure(priv, priv->ioaddr, priv->plat->est,
 			     priv->plat->clk_ptp_rate);
+	mutex_unlock(&priv->plat->est->lock);
 
 	priv->plat->fpe_cfg->enable = false;
 	stmmac_fpe_configure(priv, priv->ioaddr,
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index e14a12df381b..c38b65aaf8c2 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -115,6 +115,7 @@ struct stmmac_axi {
 
 #define EST_GCL		1024
 struct stmmac_est {
+	struct mutex lock;
 	int enable;
 	u32 btr_offset[2];
 	u32 btr[2];
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 net-next 3/3] net: stmmac: ptp: update tas basetime after ptp adjust

[Xiaoliang Yang]

After adjusting the ptp time, the Qbv base time may be the past time
of the new current time. dwmac5 hardware limited the base time cannot
be set as past time. This patch add a btr_reserve to store the base
time get from qopt, then calculate the base time and reset the Qbv
configuration after ptp time adjust.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
---
 .../net/ethernet/stmicro/stmmac/stmmac_ptp.c  | 41 ++++++++++++++++++-
 .../net/ethernet/stmicro/stmmac/stmmac_tc.c   |  6 ++-
 include/linux/stmmac.h                        |  1 +
 3 files changed, 46 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
index 4e86cdf2bc9f..580cc035536b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
@@ -62,7 +62,8 @@ static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta)
 	u32 sec, nsec;
 	u32 quotient, reminder;
 	int neg_adj = 0;
-	bool xmac;
+	bool xmac, est_rst = false;
+	int ret;
 
 	xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
 
@@ -75,10 +76,48 @@ static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta)
 	sec = quotient;
 	nsec = reminder;
 
+	/* If EST is enabled, disabled it before adjust ptp time. */
+	if (priv->plat->est && priv->plat->est->enable) {
+		est_rst = true;
+		mutex_lock(&priv->plat->est->lock);
+		priv->plat->est->enable = false;
+		stmmac_est_configure(priv, priv->ioaddr, priv->plat->est,
+				     priv->plat->clk_ptp_rate);
+		mutex_unlock(&priv->plat->est->lock);
+	}
+
 	spin_lock_irqsave(&priv->ptp_lock, flags);
 	stmmac_adjust_systime(priv, priv->ptpaddr, sec, nsec, neg_adj, xmac);
 	spin_unlock_irqrestore(&priv->ptp_lock, flags);
 
+	/* Caculate new basetime and re-configured EST after PTP time adjust. */
+	if (est_rst) {
+		struct timespec64 current_time, time;
+		ktime_t current_time_ns, basetime;
+		u64 cycle_time;
+
+		mutex_lock(&priv->plat->est->lock);
+		priv->ptp_clock_ops.gettime64(&priv->ptp_clock_ops, &current_time);
+		current_time_ns = timespec64_to_ktime(current_time);
+		time.tv_nsec = priv->plat->est->btr_reserve[0];
+		time.tv_sec = priv->plat->est->btr_reserve[1];
+		basetime = timespec64_to_ktime(time);
+		cycle_time = priv->plat->est->ctr[1] * NSEC_PER_SEC +
+			     priv->plat->est->ctr[0];
+		time = stmmac_calc_tas_basetime(basetime,
+						current_time_ns,
+						cycle_time);
+
+		priv->plat->est->btr[0] = (u32)time.tv_nsec;
+		priv->plat->est->btr[1] = (u32)time.tv_sec;
+		priv->plat->est->enable = true;
+		ret = stmmac_est_configure(priv, priv->ioaddr, priv->plat->est,
+					   priv->plat->clk_ptp_rate);
+		mutex_unlock(&priv->plat->est->lock);
+		if (ret)
+			netdev_err(priv->dev, "failed to configure EST\n");
+	}
+
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index b2a276aac724..c277595341ee 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -741,7 +741,7 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
 {
 	u32 size, wid = priv->dma_cap.estwid, dep = priv->dma_cap.estdep;
 	struct plat_stmmacenet_data *plat = priv->plat;
-	struct timespec64 time, current_time;
+	struct timespec64 time, current_time, qopt_time;
 	ktime_t current_time_ns;
 	bool fpe = false;
 	int i, ret = 0;
@@ -850,6 +850,10 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
 	priv->plat->est->btr[0] = (u32)time.tv_nsec;
 	priv->plat->est->btr[1] = (u32)time.tv_sec;
 
+	qopt_time = ktime_to_timespec64(qopt->base_time);
+	priv->plat->est->btr_reserve[0] = (u32)qopt_time.tv_nsec;
+	priv->plat->est->btr_reserve[1] = (u32)qopt_time.tv_sec;
+
 	ctr = qopt->cycle_time;
 	priv->plat->est->ctr[0] = do_div(ctr, NSEC_PER_SEC);
 	priv->plat->est->ctr[1] = (u32)ctr;
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index c38b65aaf8c2..f5ae3cf05918 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -117,6 +117,7 @@ struct stmmac_axi {
 struct stmmac_est {
 	struct mutex lock;
 	int enable;
+	u32 btr_reserve[2];
 	u32 btr_offset[2];
 	u32 btr[2];
 	u32 ctr[2];
-- 
2.17.1

[PATCH v2 net-next 3/3] net: stmmac: ptp: update tas basetime after ptp adjust

[Xiaoliang Yang]

After adjusting the ptp time, the Qbv base time may be the past time
of the new current time. dwmac5 hardware limited the base time cannot
be set as past time. This patch add a btr_reserve to store the base
time get from qopt, then calculate the base time and reset the Qbv
configuration after ptp time adjust.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
---
 .../net/ethernet/stmicro/stmmac/stmmac_ptp.c  | 41 ++++++++++++++++++-
 .../net/ethernet/stmicro/stmmac/stmmac_tc.c   |  6 ++-
 include/linux/stmmac.h                        |  1 +
 3 files changed, 46 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
index 4e86cdf2bc9f..580cc035536b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
@@ -62,7 +62,8 @@ static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta)
 	u32 sec, nsec;
 	u32 quotient, reminder;
 	int neg_adj = 0;
-	bool xmac;
+	bool xmac, est_rst = false;
+	int ret;
 
 	xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
 
@@ -75,10 +76,48 @@ static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta)
 	sec = quotient;
 	nsec = reminder;
 
+	/* If EST is enabled, disabled it before adjust ptp time. */
+	if (priv->plat->est && priv->plat->est->enable) {
+		est_rst = true;
+		mutex_lock(&priv->plat->est->lock);
+		priv->plat->est->enable = false;
+		stmmac_est_configure(priv, priv->ioaddr, priv->plat->est,
+				     priv->plat->clk_ptp_rate);
+		mutex_unlock(&priv->plat->est->lock);
+	}
+
 	spin_lock_irqsave(&priv->ptp_lock, flags);
 	stmmac_adjust_systime(priv, priv->ptpaddr, sec, nsec, neg_adj, xmac);
 	spin_unlock_irqrestore(&priv->ptp_lock, flags);
 
+	/* Caculate new basetime and re-configured EST after PTP time adjust. */
+	if (est_rst) {
+		struct timespec64 current_time, time;
+		ktime_t current_time_ns, basetime;
+		u64 cycle_time;
+
+		mutex_lock(&priv->plat->est->lock);
+		priv->ptp_clock_ops.gettime64(&priv->ptp_clock_ops, &current_time);
+		current_time_ns = timespec64_to_ktime(current_time);
+		time.tv_nsec = priv->plat->est->btr_reserve[0];
+		time.tv_sec = priv->plat->est->btr_reserve[1];
+		basetime = timespec64_to_ktime(time);
+		cycle_time = priv->plat->est->ctr[1] * NSEC_PER_SEC +
+			     priv->plat->est->ctr[0];
+		time = stmmac_calc_tas_basetime(basetime,
+						current_time_ns,
+						cycle_time);
+
+		priv->plat->est->btr[0] = (u32)time.tv_nsec;
+		priv->plat->est->btr[1] = (u32)time.tv_sec;
+		priv->plat->est->enable = true;
+		ret = stmmac_est_configure(priv, priv->ioaddr, priv->plat->est,
+					   priv->plat->clk_ptp_rate);
+		mutex_unlock(&priv->plat->est->lock);
+		if (ret)
+			netdev_err(priv->dev, "failed to configure EST\n");
+	}
+
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index b2a276aac724..c277595341ee 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -741,7 +741,7 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
 {
 	u32 size, wid = priv->dma_cap.estwid, dep = priv->dma_cap.estdep;
 	struct plat_stmmacenet_data *plat = priv->plat;
-	struct timespec64 time, current_time;
+	struct timespec64 time, current_time, qopt_time;
 	ktime_t current_time_ns;
 	bool fpe = false;
 	int i, ret = 0;
@@ -850,6 +850,10 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
 	priv->plat->est->btr[0] = (u32)time.tv_nsec;
 	priv->plat->est->btr[1] = (u32)time.tv_sec;
 
+	qopt_time = ktime_to_timespec64(qopt->base_time);
+	priv->plat->est->btr_reserve[0] = (u32)qopt_time.tv_nsec;
+	priv->plat->est->btr_reserve[1] = (u32)qopt_time.tv_sec;
+
 	ctr = qopt->cycle_time;
 	priv->plat->est->ctr[0] = do_div(ctr, NSEC_PER_SEC);
 	priv->plat->est->ctr[1] = (u32)ctr;
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index c38b65aaf8c2..f5ae3cf05918 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -117,6 +117,7 @@ struct stmmac_axi {
 struct stmmac_est {
 	struct mutex lock;
 	int enable;
+	u32 btr_reserve[2];
 	u32 btr_offset[2];
 	u32 btr[2];
 	u32 ctr[2];
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 net-next 0/3] net: stmmac: re-configure tas basetime after ptp time adjust

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net.git (refs/heads/master):

On Mon,  5 Jul 2021 18:26:52 +0800 you wrote:
> If the DWMAC Ethernet device has already set the Qbv EST configuration
> before using ptp to synchronize the time adjustment, the Qbv base time
> may change to be the past time of the new current time. This is not
> allowed by hardware.
> 
> This patch calculates and re-configures the Qbv basetime after ptp time
> adjustment.
> 
> [...]

Here is the summary with links:
  - [v2,net-next,1/3] net: stmmac: separate the tas basetime calculation function
    https://git.kernel.org/netdev/net/c/81c52c42afd9
  - [v2,net-next,2/3] net: stmmac: add mutex lock to protect est parameters
    https://git.kernel.org/netdev/net/c/b2aae654a479
  - [v2,net-next,3/3] net: stmmac: ptp: update tas basetime after ptp adjust
    https://git.kernel.org/netdev/net/c/e9e3720002f6

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [PATCH v2 net-next 0/3] net: stmmac: re-configure tas basetime after ptp time adjust

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net.git (refs/heads/master):

On Mon,  5 Jul 2021 18:26:52 +0800 you wrote:
> If the DWMAC Ethernet device has already set the Qbv EST configuration
> before using ptp to synchronize the time adjustment, the Qbv base time
> may change to be the past time of the new current time. This is not
> allowed by hardware.
> 
> This patch calculates and re-configures the Qbv basetime after ptp time
> adjustment.
> 
> [...]

Here is the summary with links:
  - [v2,net-next,1/3] net: stmmac: separate the tas basetime calculation function
    https://git.kernel.org/netdev/net/c/81c52c42afd9
  - [v2,net-next,2/3] net: stmmac: add mutex lock to protect est parameters
    https://git.kernel.org/netdev/net/c/b2aae654a479
  - [v2,net-next,3/3] net: stmmac: ptp: update tas basetime after ptp adjust
    https://git.kernel.org/netdev/net/c/e9e3720002f6

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel