From: Yunus Bas <y.bas@phytec.de> To: sam@ravnborg.org, laurent.pinchart@ideasonboard.com, thierry.reding@gmail.com, dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org Cc: airlied@linux.ie, daniel@ffwll.ch Subject: [PATCH v3 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel Date: Tue, 6 Jul 2021 09:59:07 +0200 [thread overview] Message-ID: <20210706075908.907659-1-y.bas@phytec.de> (raw) From: Stefan Riedmueller <s.riedmueller@phytec.de> This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd panel to DRM simple panel driver. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Yunus Bas <y.bas@phytec.de> --- Changes in v3: - No changes in general, added additional maintainers and also sending to general kernel mailing list --- drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 21939d4352cf..07433bff6c2b 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2008,6 +2008,32 @@ static const struct panel_desc edt_et057090dhu = { .connector_type = DRM_MODE_CONNECTOR_DPI, }; +static const struct drm_display_mode edt_etmv570g2dhu_mode = { + .clock = 25175, + .hdisplay = 640, + .hsync_start = 640, + .hsync_end = 640 + 16, + .htotal = 640 + 16 + 30 + 114, + .vdisplay = 480, + .vsync_start = 480 + 10, + .vsync_end = 480 + 10 + 3, + .vtotal = 480 + 10 + 3 + 35, + .flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_PHSYNC, +}; + +static const struct panel_desc edt_etmv570g2dhu = { + .modes = &edt_etmv570g2dhu_mode, + .num_modes = 1, + .bpc = 6, + .size = { + .width = 115, + .height = 86, + }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE, + .connector_type = DRM_MODE_CONNECTOR_DPI, +}; + static const struct drm_display_mode edt_etm0700g0dh6_mode = { .clock = 33260, .hdisplay = 800, @@ -4338,6 +4364,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "edt,et057090dhu", .data = &edt_et057090dhu, + }, { + .compatible = "edt,etmv570g2dhu", + .data = &edt_etmv570g2dhu, }, { .compatible = "edt,et070080dh6", .data = &edt_etm0700g0dh6, -- 2.30.0
WARNING: multiple messages have this Message-ID (diff)
From: Yunus Bas <y.bas@phytec.de> To: sam@ravnborg.org, laurent.pinchart@ideasonboard.com, thierry.reding@gmail.com, dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org Cc: airlied@linux.ie Subject: [PATCH v3 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel Date: Tue, 6 Jul 2021 09:59:07 +0200 [thread overview] Message-ID: <20210706075908.907659-1-y.bas@phytec.de> (raw) From: Stefan Riedmueller <s.riedmueller@phytec.de> This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd panel to DRM simple panel driver. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Yunus Bas <y.bas@phytec.de> --- Changes in v3: - No changes in general, added additional maintainers and also sending to general kernel mailing list --- drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 21939d4352cf..07433bff6c2b 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2008,6 +2008,32 @@ static const struct panel_desc edt_et057090dhu = { .connector_type = DRM_MODE_CONNECTOR_DPI, }; +static const struct drm_display_mode edt_etmv570g2dhu_mode = { + .clock = 25175, + .hdisplay = 640, + .hsync_start = 640, + .hsync_end = 640 + 16, + .htotal = 640 + 16 + 30 + 114, + .vdisplay = 480, + .vsync_start = 480 + 10, + .vsync_end = 480 + 10 + 3, + .vtotal = 480 + 10 + 3 + 35, + .flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_PHSYNC, +}; + +static const struct panel_desc edt_etmv570g2dhu = { + .modes = &edt_etmv570g2dhu_mode, + .num_modes = 1, + .bpc = 6, + .size = { + .width = 115, + .height = 86, + }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE, + .connector_type = DRM_MODE_CONNECTOR_DPI, +}; + static const struct drm_display_mode edt_etm0700g0dh6_mode = { .clock = 33260, .hdisplay = 800, @@ -4338,6 +4364,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "edt,et057090dhu", .data = &edt_et057090dhu, + }, { + .compatible = "edt,etmv570g2dhu", + .data = &edt_etmv570g2dhu, }, { .compatible = "edt,et070080dh6", .data = &edt_etm0700g0dh6, -- 2.30.0
next reply other threads:[~2021-07-06 7:59 UTC|newest] Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-06 7:59 Yunus Bas [this message] 2021-07-06 7:59 ` [PATCH v3 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel Yunus Bas 2021-07-06 7:59 ` [PATCH v3 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel Yunus Bas 2021-07-06 7:59 ` Yunus Bas 2021-07-09 18:12 ` Sam Ravnborg 2021-07-09 19:02 ` Yunus Bas 2021-07-09 19:02 ` Yunus Bas 2021-07-09 19:30 ` Sam Ravnborg 2021-07-09 19:34 ` Yunus Bas 2021-07-09 19:34 ` Yunus Bas 2021-07-09 18:08 ` [PATCH v3 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel Sam Ravnborg 2021-07-09 18:56 ` Yunus Bas 2021-07-09 18:56 ` Yunus Bas
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210706075908.907659-1-y.bas@phytec.de \ --to=y.bas@phytec.de \ --cc=airlied@linux.ie \ --cc=daniel@ffwll.ch \ --cc=dri-devel@lists.freedesktop.org \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-kernel@vger.kernel.org \ --cc=sam@ravnborg.org \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.