* [PATCH v6 00/10] GICv3 LPI and ITS feature implementation
@ 2021-07-07 2:18 Shashi Mallela
2021-07-07 2:18 ` [PATCH v6 01/10] hw/intc: GICv3 ITS initial framework Shashi Mallela
` (9 more replies)
0 siblings, 10 replies; 14+ messages in thread
From: Shashi Mallela @ 2021-07-07 2:18 UTC (permalink / raw)
To: peter.maydell, leif, rad, mst, imammedo; +Cc: eric.auger, qemu-arm, qemu-devel
This patchset implements qemu device model for enabling physical
LPI support and ITS functionality in GIC as per GICv3 specification.
Both flat table and 2 level tables are implemented.The ITS commands
for adding/deleting ITS table entries,trigerring LPI interrupts are
implemented.Translated LPI interrupt ids are processed by redistributor
to determine priority and set pending state appropriately before
forwarding the same to cpu interface.
The ITS feature support has been added to sbsa-ref platform as well as
virt platform,wherein the emulated functionality co-exists with kvm
kernel functionality.
Changes in v6:
- made changes to masking scheme being used in all relevant sections
- updated process_mapti to validate idbits based on GICD_TYPER.IDbits
instead of GICR_PROPBASER.IDbits
- updated its_realize() to check every CPU for physical LPI support in
each associated redistibutor and return error if not
- removed GICR_TYPER_PLPIS check in its_reset()
- addressed pending v4 comments in gicv3_internal.h #defines
- refactored gicv3_redist_lpi_pending() as per v5 comments
- added iasl disassembly for new IORT.pxb file
- addressed all v5 comments around code formatting and
gicv3_internal.h #defines
- All kvm_unit_tests PASS
Shashi Mallela (10):
hw/intc: GICv3 ITS initial framework
hw/intc: GICv3 ITS register definitions added
hw/intc: GICv3 ITS command queue framework
hw/intc: GICv3 ITS Command processing
hw/intc: GICv3 ITS Feature enablement
hw/intc: GICv3 redistributor ITS processing
hw/arm/sbsa-ref: add ITS support in SBSA GIC
tests/data/acpi/virt: Add IORT files for ITS
hw/arm/virt: add ITS support in virt GIC
tests/data/acpi/virt: Update IORT files for ITS
hw/arm/sbsa-ref.c | 26 +-
hw/arm/virt.c | 28 +-
hw/intc/arm_gicv3.c | 14 +
hw/intc/arm_gicv3_common.c | 13 +
hw/intc/arm_gicv3_cpuif.c | 7 +-
hw/intc/arm_gicv3_dist.c | 5 +-
hw/intc/arm_gicv3_its.c | 1301 ++++++++++++++++++++++++
hw/intc/arm_gicv3_its_common.c | 7 +-
hw/intc/arm_gicv3_its_kvm.c | 2 +-
hw/intc/arm_gicv3_redist.c | 154 ++-
hw/intc/gicv3_internal.h | 189 +++-
hw/intc/meson.build | 1 +
include/hw/arm/virt.h | 2 +
include/hw/intc/arm_gicv3_common.h | 13 +
include/hw/intc/arm_gicv3_its_common.h | 32 +-
target/arm/kvm_arm.h | 4 +-
tests/data/acpi/virt/IORT | Bin 0 -> 124 bytes
tests/data/acpi/virt/IORT.memhp | Bin 0 -> 124 bytes
tests/data/acpi/virt/IORT.numamem | Bin 0 -> 124 bytes
tests/data/acpi/virt/IORT.pxb | Bin 0 -> 124 bytes
20 files changed, 1771 insertions(+), 27 deletions(-)
create mode 100644 hw/intc/arm_gicv3_its.c
create mode 100644 tests/data/acpi/virt/IORT
create mode 100644 tests/data/acpi/virt/IORT.memhp
create mode 100644 tests/data/acpi/virt/IORT.numamem
create mode 100644 tests/data/acpi/virt/IORT.pxb
--
2.27.0
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v6 01/10] hw/intc: GICv3 ITS initial framework
2021-07-07 2:18 [PATCH v6 00/10] GICv3 LPI and ITS feature implementation Shashi Mallela
@ 2021-07-07 2:18 ` Shashi Mallela
2021-07-08 17:24 ` Eric Auger
2021-07-07 2:18 ` [PATCH v6 02/10] hw/intc: GICv3 ITS register definitions added Shashi Mallela
` (8 subsequent siblings)
9 siblings, 1 reply; 14+ messages in thread
From: Shashi Mallela @ 2021-07-07 2:18 UTC (permalink / raw)
To: peter.maydell, leif, rad, mst, imammedo; +Cc: eric.auger, qemu-arm, qemu-devel
Added register definitions relevant to ITS,implemented overall
ITS device framework with stubs for ITS control and translater
regions read/write,extended ITS common to handle mmio init between
existing kvm device and newer qemu device.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/intc/arm_gicv3_its.c | 245 +++++++++++++++++++++++++
hw/intc/arm_gicv3_its_common.c | 7 +-
hw/intc/arm_gicv3_its_kvm.c | 2 +-
hw/intc/gicv3_internal.h | 97 +++++++++-
hw/intc/meson.build | 1 +
include/hw/intc/arm_gicv3_its_common.h | 9 +-
6 files changed, 347 insertions(+), 14 deletions(-)
create mode 100644 hw/intc/arm_gicv3_its.c
diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c
new file mode 100644
index 0000000000..2286b3f757
--- /dev/null
+++ b/hw/intc/arm_gicv3_its.c
@@ -0,0 +1,245 @@
+/*
+ * ITS emulation for a GICv3-based system
+ *
+ * Copyright Linaro.org 2021
+ *
+ * Authors:
+ * Shashi Mallela <shashi.mallela@linaro.org>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or (at your
+ * option) any later version. See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/qdev-properties.h"
+#include "hw/intc/arm_gicv3_its_common.h"
+#include "gicv3_internal.h"
+#include "qom/object.h"
+#include "qapi/error.h"
+
+typedef struct GICv3ITSClass GICv3ITSClass;
+/* This is reusing the GICv3ITSState typedef from ARM_GICV3_ITS_COMMON */
+DECLARE_OBJ_CHECKERS(GICv3ITSState, GICv3ITSClass,
+ ARM_GICV3_ITS, TYPE_ARM_GICV3_ITS)
+
+struct GICv3ITSClass {
+ GICv3ITSCommonClass parent_class;
+ void (*parent_reset)(DeviceState *dev);
+};
+
+static MemTxResult gicv3_its_translation_write(void *opaque, hwaddr offset,
+ uint64_t data, unsigned size,
+ MemTxAttrs attrs)
+{
+ MemTxResult result = MEMTX_OK;
+
+ return result;
+}
+
+static MemTxResult its_writel(GICv3ITSState *s, hwaddr offset,
+ uint64_t value, MemTxAttrs attrs)
+{
+ MemTxResult result = MEMTX_OK;
+
+ return result;
+}
+
+static MemTxResult its_readl(GICv3ITSState *s, hwaddr offset,
+ uint64_t *data, MemTxAttrs attrs)
+{
+ MemTxResult result = MEMTX_OK;
+
+ return result;
+}
+
+static MemTxResult its_writell(GICv3ITSState *s, hwaddr offset,
+ uint64_t value, MemTxAttrs attrs)
+{
+ MemTxResult result = MEMTX_OK;
+
+ return result;
+}
+
+static MemTxResult its_readll(GICv3ITSState *s, hwaddr offset,
+ uint64_t *data, MemTxAttrs attrs)
+{
+ MemTxResult result = MEMTX_OK;
+
+ return result;
+}
+
+static MemTxResult gicv3_its_read(void *opaque, hwaddr offset, uint64_t *data,
+ unsigned size, MemTxAttrs attrs)
+{
+ GICv3ITSState *s = (GICv3ITSState *)opaque;
+ MemTxResult result;
+
+ switch (size) {
+ case 4:
+ result = its_readl(s, offset, data, attrs);
+ break;
+ case 8:
+ result = its_readll(s, offset, data, attrs);
+ break;
+ default:
+ result = MEMTX_ERROR;
+ break;
+ }
+
+ if (result == MEMTX_ERROR) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid guest read at offset " TARGET_FMT_plx
+ "size %u\n", __func__, offset, size);
+ /*
+ * The spec requires that reserved registers are RAZ/WI;
+ * so use MEMTX_ERROR returns from leaf functions as a way to
+ * trigger the guest-error logging but don't return it to
+ * the caller, or we'll cause a spurious guest data abort.
+ */
+ result = MEMTX_OK;
+ *data = 0;
+ }
+ return result;
+}
+
+static MemTxResult gicv3_its_write(void *opaque, hwaddr offset, uint64_t data,
+ unsigned size, MemTxAttrs attrs)
+{
+ GICv3ITSState *s = (GICv3ITSState *)opaque;
+ MemTxResult result;
+
+ switch (size) {
+ case 4:
+ result = its_writel(s, offset, data, attrs);
+ break;
+ case 8:
+ result = its_writell(s, offset, data, attrs);
+ break;
+ default:
+ result = MEMTX_ERROR;
+ break;
+ }
+
+ if (result == MEMTX_ERROR) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid guest write at offset " TARGET_FMT_plx
+ "size %u\n", __func__, offset, size);
+ /*
+ * The spec requires that reserved registers are RAZ/WI;
+ * so use MEMTX_ERROR returns from leaf functions as a way to
+ * trigger the guest-error logging but don't return it to
+ * the caller, or we'll cause a spurious guest data abort.
+ */
+ result = MEMTX_OK;
+ }
+ return result;
+}
+
+static const MemoryRegionOps gicv3_its_control_ops = {
+ .read_with_attrs = gicv3_its_read,
+ .write_with_attrs = gicv3_its_write,
+ .valid.min_access_size = 4,
+ .valid.max_access_size = 8,
+ .impl.min_access_size = 4,
+ .impl.max_access_size = 8,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static const MemoryRegionOps gicv3_its_translation_ops = {
+ .write_with_attrs = gicv3_its_translation_write,
+ .valid.min_access_size = 2,
+ .valid.max_access_size = 4,
+ .impl.min_access_size = 2,
+ .impl.max_access_size = 4,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void gicv3_arm_its_realize(DeviceState *dev, Error **errp)
+{
+ GICv3ITSState *s = ARM_GICV3_ITS_COMMON(dev);
+ int i;
+
+ for (i = 0; i < s->gicv3->num_cpu; i++) {
+ if (!(s->gicv3->cpu[i].gicr_typer & GICR_TYPER_PLPIS)) {
+ error_setg(errp, "Physical LPI not supported by CPU %d", i);
+ return;
+ }
+ }
+
+ gicv3_its_init_mmio(s, &gicv3_its_control_ops, &gicv3_its_translation_ops);
+
+ /* set the ITS default features supported */
+ s->typer = FIELD_DP64(s->typer, GITS_TYPER, PHYSICAL,
+ GITS_TYPE_PHYSICAL);
+ s->typer = FIELD_DP64(s->typer, GITS_TYPER, ITT_ENTRY_SIZE,
+ ITS_ITT_ENTRY_SIZE - 1);
+ s->typer = FIELD_DP64(s->typer, GITS_TYPER, IDBITS, ITS_IDBITS);
+ s->typer = FIELD_DP64(s->typer, GITS_TYPER, DEVBITS, ITS_DEVBITS);
+ s->typer = FIELD_DP64(s->typer, GITS_TYPER, CIL, 1);
+ s->typer = FIELD_DP64(s->typer, GITS_TYPER, CIDBITS, ITS_CIDBITS);
+}
+
+static void gicv3_its_reset(DeviceState *dev)
+{
+ GICv3ITSState *s = ARM_GICV3_ITS_COMMON(dev);
+ GICv3ITSClass *c = ARM_GICV3_ITS_GET_CLASS(s);
+
+ c->parent_reset(dev);
+
+ /* Quiescent bit reset to 1 */
+ s->ctlr = FIELD_DP32(s->ctlr, GITS_CTLR, QUIESCENT, 1);
+
+ /*
+ * setting GITS_BASER0.Type = 0b001 (Device)
+ * GITS_BASER1.Type = 0b100 (Collection Table)
+ * GITS_BASER<n>.Type,where n = 3 to 7 are 0b00 (Unimplemented)
+ * GITS_BASER<0,1>.Page_Size = 64KB
+ * and default translation table entry size to 16 bytes
+ */
+ s->baser[0] = FIELD_DP64(s->baser[0], GITS_BASER, TYPE,
+ GITS_BASER_TYPE_DEVICE);
+ s->baser[0] = FIELD_DP64(s->baser[0], GITS_BASER, PAGESIZE,
+ GITS_BASER_PAGESIZE_64K);
+ s->baser[0] = FIELD_DP64(s->baser[0], GITS_BASER, ENTRYSIZE,
+ GITS_DTE_SIZE - 1);
+
+ s->baser[1] = FIELD_DP64(s->baser[1], GITS_BASER, TYPE,
+ GITS_BASER_TYPE_COLLECTION);
+ s->baser[1] = FIELD_DP64(s->baser[1], GITS_BASER, PAGESIZE,
+ GITS_BASER_PAGESIZE_64K);
+ s->baser[1] = FIELD_DP64(s->baser[1], GITS_BASER, ENTRYSIZE,
+ GITS_CTE_SIZE - 1);
+}
+
+static Property gicv3_its_props[] = {
+ DEFINE_PROP_LINK("parent-gicv3", GICv3ITSState, gicv3, "arm-gicv3",
+ GICv3State *),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void gicv3_its_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ GICv3ITSClass *ic = ARM_GICV3_ITS_CLASS(klass);
+
+ dc->realize = gicv3_arm_its_realize;
+ device_class_set_props(dc, gicv3_its_props);
+ device_class_set_parent_reset(dc, gicv3_its_reset, &ic->parent_reset);
+}
+
+static const TypeInfo gicv3_its_info = {
+ .name = TYPE_ARM_GICV3_ITS,
+ .parent = TYPE_ARM_GICV3_ITS_COMMON,
+ .instance_size = sizeof(GICv3ITSState),
+ .class_init = gicv3_its_class_init,
+ .class_size = sizeof(GICv3ITSClass),
+};
+
+static void gicv3_its_register_types(void)
+{
+ type_register_static(&gicv3_its_info);
+}
+
+type_init(gicv3_its_register_types)
diff --git a/hw/intc/arm_gicv3_its_common.c b/hw/intc/arm_gicv3_its_common.c
index 66c4c6a188..7d7f3882e7 100644
--- a/hw/intc/arm_gicv3_its_common.c
+++ b/hw/intc/arm_gicv3_its_common.c
@@ -50,6 +50,8 @@ static int gicv3_its_post_load(void *opaque, int version_id)
static const VMStateDescription vmstate_its = {
.name = "arm_gicv3_its",
+ .version_id = 1,
+ .minimum_version_id = 1,
.pre_save = gicv3_its_pre_save,
.post_load = gicv3_its_post_load,
.priority = MIG_PRI_GICV3_ITS,
@@ -99,14 +101,15 @@ static const MemoryRegionOps gicv3_its_trans_ops = {
.endianness = DEVICE_NATIVE_ENDIAN,
};
-void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops)
+void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops,
+ const MemoryRegionOps *tops)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(s);
memory_region_init_io(&s->iomem_its_cntrl, OBJECT(s), ops, s,
"control", ITS_CONTROL_SIZE);
memory_region_init_io(&s->iomem_its_translation, OBJECT(s),
- &gicv3_its_trans_ops, s,
+ tops ? tops : &gicv3_its_trans_ops, s,
"translation", ITS_TRANS_SIZE);
/* Our two regions are always adjacent, therefore we now combine them
diff --git a/hw/intc/arm_gicv3_its_kvm.c b/hw/intc/arm_gicv3_its_kvm.c
index b554d2ede0..0b4cbed28b 100644
--- a/hw/intc/arm_gicv3_its_kvm.c
+++ b/hw/intc/arm_gicv3_its_kvm.c
@@ -106,7 +106,7 @@ static void kvm_arm_its_realize(DeviceState *dev, Error **errp)
kvm_arm_register_device(&s->iomem_its_cntrl, -1, KVM_DEV_ARM_VGIC_GRP_ADDR,
KVM_VGIC_ITS_ADDR_TYPE, s->dev_fd, 0);
- gicv3_its_init_mmio(s, NULL);
+ gicv3_its_init_mmio(s, NULL, NULL);
if (!kvm_device_check_attr(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_ITS_REGS,
GITS_CTLR)) {
diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
index 05303a55c8..6c0ff0061c 100644
--- a/hw/intc/gicv3_internal.h
+++ b/hw/intc/gicv3_internal.h
@@ -24,6 +24,7 @@
#ifndef QEMU_ARM_GICV3_INTERNAL_H
#define QEMU_ARM_GICV3_INTERNAL_H
+#include "hw/registerfields.h"
#include "hw/intc/arm_gicv3_common.h"
/* Distributor registers, as offsets from the distributor base address */
@@ -67,6 +68,9 @@
#define GICD_CTLR_E1NWF (1U << 7)
#define GICD_CTLR_RWP (1U << 31)
+/* 16 bits EventId */
+#define GICD_TYPER_IDBITS 0xf
+
/*
* Redistributor frame offsets from RD_base
*/
@@ -122,17 +126,17 @@
#define GICR_WAKER_ProcessorSleep (1U << 1)
#define GICR_WAKER_ChildrenAsleep (1U << 2)
-#define GICR_PROPBASER_OUTER_CACHEABILITY_MASK (7ULL << 56)
-#define GICR_PROPBASER_ADDR_MASK (0xfffffffffULL << 12)
-#define GICR_PROPBASER_SHAREABILITY_MASK (3U << 10)
-#define GICR_PROPBASER_CACHEABILITY_MASK (7U << 7)
-#define GICR_PROPBASER_IDBITS_MASK (0x1f)
+FIELD(GICR_PROPBASER, IDBITS, 0, 5)
+FIELD(GICR_PROPBASER, INNERCACHE, 7, 3)
+FIELD(GICR_PROPBASER, SHAREABILITY, 10, 2)
+FIELD(GICR_PROPBASER, PHYADDR, 12, 40)
+FIELD(GICR_PROPBASER, OUTERCACHE, 56, 3)
-#define GICR_PENDBASER_PTZ (1ULL << 62)
-#define GICR_PENDBASER_OUTER_CACHEABILITY_MASK (7ULL << 56)
-#define GICR_PENDBASER_ADDR_MASK (0xffffffffULL << 16)
-#define GICR_PENDBASER_SHAREABILITY_MASK (3U << 10)
-#define GICR_PENDBASER_CACHEABILITY_MASK (7U << 7)
+FIELD(GICR_PENDBASER, INNERCACHE, 7, 3)
+FIELD(GICR_PENDBASER, SHAREABILITY, 10, 2)
+FIELD(GICR_PENDBASER, PHYADDR, 16, 36)
+FIELD(GICR_PENDBASER, OUTERCACHE, 56, 3)
+FIELD(GICR_PENDBASER, PTZ, 62, 1)
#define ICC_CTLR_EL1_CBPR (1U << 0)
#define ICC_CTLR_EL1_EOIMODE (1U << 1)
@@ -239,6 +243,79 @@
#define ICH_VTR_EL2_PREBITS_SHIFT 26
#define ICH_VTR_EL2_PRIBITS_SHIFT 29
+/* ITS Registers */
+
+FIELD(GITS_BASER, SIZE, 0, 8)
+FIELD(GITS_BASER, PAGESIZE, 8, 2)
+FIELD(GITS_BASER, SHAREABILITY, 10, 2)
+FIELD(GITS_BASER, PHYADDR, 12, 36)
+FIELD(GITS_BASER, PHYADDRL_64K, 16, 32)
+FIELD(GITS_BASER, PHYADDRH_64K, 12, 4)
+FIELD(GITS_BASER, ENTRYSIZE, 48, 5)
+FIELD(GITS_BASER, OUTERCACHE, 53, 3)
+FIELD(GITS_BASER, TYPE, 56, 3)
+FIELD(GITS_BASER, INNERCACHE, 59, 3)
+FIELD(GITS_BASER, INDIRECT, 62, 1)
+FIELD(GITS_BASER, VALID, 63, 1)
+
+FIELD(GITS_CTLR, QUIESCENT, 31, 1)
+
+FIELD(GITS_TYPER, PHYSICAL, 0, 1)
+FIELD(GITS_TYPER, ITT_ENTRY_SIZE, 4, 4)
+FIELD(GITS_TYPER, IDBITS, 8, 5)
+FIELD(GITS_TYPER, DEVBITS, 13, 5)
+FIELD(GITS_TYPER, SEIS, 18, 1)
+FIELD(GITS_TYPER, PTA, 19, 1)
+FIELD(GITS_TYPER, CIDBITS, 32, 4)
+FIELD(GITS_TYPER, CIL, 36, 1)
+
+#define GITS_BASER_PAGESIZE_4K 0
+#define GITS_BASER_PAGESIZE_16K 1
+#define GITS_BASER_PAGESIZE_64K 2
+
+#define GITS_BASER_TYPE_DEVICE 1ULL
+#define GITS_BASER_TYPE_COLLECTION 4ULL
+
+/**
+ * Default features advertised by this version of ITS
+ */
+/* Physical LPIs supported */
+#define GITS_TYPE_PHYSICAL (1U << 0)
+
+/*
+ * 12 bytes Interrupt translation Table Entry size
+ * ITE Lower 8 Bytes
+ * Valid = 1 bit,InterruptType = 1 bit,
+ * Size of LPI number space[considering max 24 bits]
+ * (GICv3 = 1023, GICv4 = pINTID doorbell value),
+ * Size of LPI number space[considering max 24 bits],
+ * ITE Higher 4 Bytes
+ * ICID = 16 bits,
+ * vPEID = 16 bits
+ */
+#define ITS_ITT_ENTRY_SIZE 0xC
+
+/* 16 bits EventId */
+#define ITS_IDBITS GICD_TYPER_IDBITS
+
+/* 16 bits DeviceId */
+#define ITS_DEVBITS 0xF
+
+/* 16 bits CollectionId */
+#define ITS_CIDBITS 0xF
+
+/*
+ * 8 bytes Device Table Entry size
+ * Valid = 1 bit,ITTAddr = 44 bits,Size = 5 bits
+ */
+#define GITS_DTE_SIZE (0x8ULL)
+
+/*
+ * 8 bytes Collection Table Entry size
+ * Valid = 1 bit,RDBase = 36 bits(considering max RDBASE)
+ */
+#define GITS_CTE_SIZE (0x8ULL)
+
/* Special interrupt IDs */
#define INTID_SECURE 1020
#define INTID_NONSECURE 1021
diff --git a/hw/intc/meson.build b/hw/intc/meson.build
index 6e52a166e3..4dcfea6aa8 100644
--- a/hw/intc/meson.build
+++ b/hw/intc/meson.build
@@ -8,6 +8,7 @@ softmmu_ss.add(when: 'CONFIG_ARM_GIC', if_true: files(
'arm_gicv3_dist.c',
'arm_gicv3_its_common.c',
'arm_gicv3_redist.c',
+ 'arm_gicv3_its.c',
))
softmmu_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_pic.c'))
softmmu_ss.add(when: 'CONFIG_HEATHROW_PIC', if_true: files('heathrow_pic.c'))
diff --git a/include/hw/intc/arm_gicv3_its_common.h b/include/hw/intc/arm_gicv3_its_common.h
index 5a0952b404..65d1191db1 100644
--- a/include/hw/intc/arm_gicv3_its_common.h
+++ b/include/hw/intc/arm_gicv3_its_common.h
@@ -25,17 +25,22 @@
#include "hw/intc/arm_gicv3_common.h"
#include "qom/object.h"
+#define TYPE_ARM_GICV3_ITS "arm-gicv3-its"
+
#define ITS_CONTROL_SIZE 0x10000
#define ITS_TRANS_SIZE 0x10000
#define ITS_SIZE (ITS_CONTROL_SIZE + ITS_TRANS_SIZE)
#define GITS_CTLR 0x0
#define GITS_IIDR 0x4
+#define GITS_TYPER 0x8
#define GITS_CBASER 0x80
#define GITS_CWRITER 0x88
#define GITS_CREADR 0x90
#define GITS_BASER 0x100
+#define GITS_TRANSLATER 0x0040
+
struct GICv3ITSState {
SysBusDevice parent_obj;
@@ -52,6 +57,7 @@ struct GICv3ITSState {
/* Registers */
uint32_t ctlr;
uint32_t iidr;
+ uint64_t typer;
uint64_t cbaser;
uint64_t cwriter;
uint64_t creadr;
@@ -62,7 +68,8 @@ struct GICv3ITSState {
typedef struct GICv3ITSState GICv3ITSState;
-void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops);
+void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops,
+ const MemoryRegionOps *tops);
#define TYPE_ARM_GICV3_ITS_COMMON "arm-gicv3-its-common"
typedef struct GICv3ITSCommonClass GICv3ITSCommonClass;
--
2.27.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v6 02/10] hw/intc: GICv3 ITS register definitions added
2021-07-07 2:18 [PATCH v6 00/10] GICv3 LPI and ITS feature implementation Shashi Mallela
2021-07-07 2:18 ` [PATCH v6 01/10] hw/intc: GICv3 ITS initial framework Shashi Mallela
@ 2021-07-07 2:18 ` Shashi Mallela
2021-07-07 2:18 ` [PATCH v6 03/10] hw/intc: GICv3 ITS command queue framework Shashi Mallela
` (7 subsequent siblings)
9 siblings, 0 replies; 14+ messages in thread
From: Shashi Mallela @ 2021-07-07 2:18 UTC (permalink / raw)
To: peter.maydell, leif, rad, mst, imammedo; +Cc: eric.auger, qemu-arm, qemu-devel
Defined descriptors for ITS device table,collection table and ITS
command queue entities.Implemented register read/write functions,
extract ITS table parameters and command queue parameters,extended
gicv3 common to capture qemu address space(which host the ITS table
platform memories required for subsequent ITS processing) and
initialize the same in ITS device.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
---
hw/intc/arm_gicv3_its.c | 376 +++++++++++++++++++++++++
hw/intc/gicv3_internal.h | 29 ++
include/hw/intc/arm_gicv3_common.h | 3 +
include/hw/intc/arm_gicv3_its_common.h | 23 ++
4 files changed, 431 insertions(+)
diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c
index 2286b3f757..683d40182f 100644
--- a/hw/intc/arm_gicv3_its.c
+++ b/hw/intc/arm_gicv3_its.c
@@ -29,6 +29,160 @@ struct GICv3ITSClass {
void (*parent_reset)(DeviceState *dev);
};
+static uint64_t baser_base_addr(uint64_t value, uint32_t page_sz)
+{
+ uint64_t result = 0;
+
+ switch (page_sz) {
+ case GITS_PAGE_SIZE_4K:
+ case GITS_PAGE_SIZE_16K:
+ result = FIELD_EX64(value, GITS_BASER, PHYADDR);
+ break;
+
+ case GITS_PAGE_SIZE_64K:
+ result = FIELD_EX64(value, GITS_BASER, PHYADDRL_64K) << 16;
+ result |= FIELD_EX64(value, GITS_BASER, PHYADDRH_64K) << 48;
+ break;
+
+ default:
+ break;
+ }
+ return result;
+}
+
+/*
+ * This function extracts the ITS Device and Collection table specific
+ * parameters (like base_addr, size etc) from GITS_BASER register.
+ * It is called during ITS enable and also during post_load migration
+ */
+static void extract_table_params(GICv3ITSState *s)
+{
+ uint16_t num_pages = 0;
+ uint8_t page_sz_type;
+ uint8_t type;
+ uint32_t page_sz = 0;
+ uint64_t value;
+
+ for (int i = 0; i < 8; i++) {
+ value = s->baser[i];
+
+ if (!value) {
+ continue;
+ }
+
+ page_sz_type = FIELD_EX64(value, GITS_BASER, PAGESIZE);
+
+ switch (page_sz_type) {
+ case 0:
+ page_sz = GITS_PAGE_SIZE_4K;
+ break;
+
+ case 1:
+ page_sz = GITS_PAGE_SIZE_16K;
+ break;
+
+ case 2:
+ case 3:
+ page_sz = GITS_PAGE_SIZE_64K;
+ break;
+
+ default:
+ g_assert_not_reached();
+ }
+
+ num_pages = FIELD_EX64(value, GITS_BASER, SIZE) + 1;
+
+ type = FIELD_EX64(value, GITS_BASER, TYPE);
+
+ switch (type) {
+
+ case GITS_BASER_TYPE_DEVICE:
+ memset(&s->dt, 0 , sizeof(s->dt));
+ s->dt.valid = FIELD_EX64(value, GITS_BASER, VALID);
+
+ if (!s->dt.valid) {
+ return;
+ }
+
+ s->dt.page_sz = page_sz;
+ s->dt.indirect = FIELD_EX64(value, GITS_BASER, INDIRECT);
+ s->dt.entry_sz = FIELD_EX64(value, GITS_BASER, ENTRYSIZE);
+
+ if (!s->dt.indirect) {
+ s->dt.max_entries = (num_pages * page_sz) / s->dt.entry_sz;
+ } else {
+ s->dt.max_entries = (((num_pages * page_sz) /
+ L1TABLE_ENTRY_SIZE) *
+ (page_sz / s->dt.entry_sz));
+ }
+
+ s->dt.maxids.max_devids = (1UL << (FIELD_EX64(s->typer, GITS_TYPER,
+ DEVBITS) + 1));
+
+ s->dt.base_addr = baser_base_addr(value, page_sz);
+
+ break;
+
+ case GITS_BASER_TYPE_COLLECTION:
+ memset(&s->ct, 0 , sizeof(s->ct));
+ s->ct.valid = FIELD_EX64(value, GITS_BASER, VALID);
+
+ /*
+ * GITS_TYPER.HCC is 0 for this implementation
+ * hence writes are discarded if ct.valid is 0
+ */
+ if (!s->ct.valid) {
+ return;
+ }
+
+ s->ct.page_sz = page_sz;
+ s->ct.indirect = FIELD_EX64(value, GITS_BASER, INDIRECT);
+ s->ct.entry_sz = FIELD_EX64(value, GITS_BASER, ENTRYSIZE);
+
+ if (!s->ct.indirect) {
+ s->ct.max_entries = (num_pages * page_sz) / s->ct.entry_sz;
+ } else {
+ s->ct.max_entries = (((num_pages * page_sz) /
+ L1TABLE_ENTRY_SIZE) *
+ (page_sz / s->ct.entry_sz));
+ }
+
+ if (FIELD_EX64(s->typer, GITS_TYPER, CIL)) {
+ s->ct.maxids.max_collids = (1UL << (FIELD_EX64(s->typer,
+ GITS_TYPER, CIDBITS) + 1));
+ } else {
+ /* 16-bit CollectionId supported when CIL == 0 */
+ s->ct.maxids.max_collids = (1UL << 16);
+ }
+
+ s->ct.base_addr = baser_base_addr(value, page_sz);
+
+ break;
+
+ default:
+ break;
+ }
+ }
+}
+
+static void extract_cmdq_params(GICv3ITSState *s)
+{
+ uint16_t num_pages = 0;
+ uint64_t value = s->cbaser;
+
+ num_pages = FIELD_EX64(value, GITS_CBASER, SIZE) + 1;
+
+ memset(&s->cq, 0 , sizeof(s->cq));
+ s->cq.valid = FIELD_EX64(value, GITS_CBASER, VALID);
+
+ if (s->cq.valid) {
+ s->cq.max_entries = (num_pages * GITS_PAGE_SIZE_4K) /
+ GITS_CMDQ_ENTRY_SIZE;
+ s->cq.base_addr = FIELD_EX64(value, GITS_CBASER, PHYADDR);
+ s->cq.base_addr <<= R_GITS_CBASER_PHYADDR_SHIFT;
+ }
+}
+
static MemTxResult gicv3_its_translation_write(void *opaque, hwaddr offset,
uint64_t data, unsigned size,
MemTxAttrs attrs)
@@ -42,7 +196,99 @@ static MemTxResult its_writel(GICv3ITSState *s, hwaddr offset,
uint64_t value, MemTxAttrs attrs)
{
MemTxResult result = MEMTX_OK;
+ int index;
+ switch (offset) {
+ case GITS_CTLR:
+ s->ctlr |= (value & ~(s->ctlr));
+
+ if (s->ctlr & ITS_CTLR_ENABLED) {
+ extract_table_params(s);
+ extract_cmdq_params(s);
+ s->creadr = 0;
+ }
+ break;
+ case GITS_CBASER:
+ /*
+ * IMPDEF choice:- GITS_CBASER register becomes RO if ITS is
+ * already enabled
+ */
+ if (!(s->ctlr & ITS_CTLR_ENABLED)) {
+ s->cbaser = deposit64(s->cbaser, 0, 32, value);
+ s->creadr = 0;
+ s->cwriter = s->creadr;
+ }
+ break;
+ case GITS_CBASER + 4:
+ /*
+ * IMPDEF choice:- GITS_CBASER register becomes RO if ITS is
+ * already enabled
+ */
+ if (!(s->ctlr & ITS_CTLR_ENABLED)) {
+ s->cbaser = deposit64(s->cbaser, 32, 32, value);
+ s->creadr = 0;
+ s->cwriter = s->creadr;
+ }
+ break;
+ case GITS_CWRITER:
+ s->cwriter = deposit64(s->cwriter, 0, 32,
+ (value & ~R_GITS_CWRITER_RETRY_MASK));
+ break;
+ case GITS_CWRITER + 4:
+ s->cwriter = deposit64(s->cwriter, 32, 32, value);
+ break;
+ case GITS_CREADR:
+ if (s->gicv3->gicd_ctlr & GICD_CTLR_DS) {
+ s->creadr = deposit64(s->creadr, 0, 32,
+ (value & ~R_GITS_CREADR_STALLED_MASK));
+ } else {
+ /* RO register, ignore the write */
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid guest write to RO register at offset "
+ TARGET_FMT_plx "\n", __func__, offset);
+ }
+ break;
+ case GITS_CREADR + 4:
+ if (s->gicv3->gicd_ctlr & GICD_CTLR_DS) {
+ s->creadr = deposit64(s->creadr, 32, 32, value);
+ } else {
+ /* RO register, ignore the write */
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid guest write to RO register at offset "
+ TARGET_FMT_plx "\n", __func__, offset);
+ }
+ break;
+ case GITS_BASER ... GITS_BASER + 0x3f:
+ /*
+ * IMPDEF choice:- GITS_BASERn register becomes RO if ITS is
+ * already enabled
+ */
+ if (!(s->ctlr & ITS_CTLR_ENABLED)) {
+ index = (offset - GITS_BASER) / 8;
+
+ if (offset & 7) {
+ value <<= 32;
+ value &= ~GITS_BASER_RO_MASK;
+ s->baser[index] &= GITS_BASER_RO_MASK | MAKE_64BIT_MASK(0, 32);
+ s->baser[index] |= value;
+ } else {
+ value &= ~GITS_BASER_RO_MASK;
+ s->baser[index] &= GITS_BASER_RO_MASK | MAKE_64BIT_MASK(32, 32);
+ s->baser[index] |= value;
+ }
+ }
+ break;
+ case GITS_IIDR:
+ case GITS_IDREGS ... GITS_IDREGS + 0x2f:
+ /* RO registers, ignore the write */
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid guest write to RO register at offset "
+ TARGET_FMT_plx "\n", __func__, offset);
+ break;
+ default:
+ result = MEMTX_ERROR;
+ break;
+ }
return result;
}
@@ -50,7 +296,55 @@ static MemTxResult its_readl(GICv3ITSState *s, hwaddr offset,
uint64_t *data, MemTxAttrs attrs)
{
MemTxResult result = MEMTX_OK;
+ int index;
+ switch (offset) {
+ case GITS_CTLR:
+ *data = s->ctlr;
+ break;
+ case GITS_IIDR:
+ *data = gicv3_iidr();
+ break;
+ case GITS_IDREGS ... GITS_IDREGS + 0x2f:
+ /* ID registers */
+ *data = gicv3_idreg(offset - GITS_IDREGS);
+ break;
+ case GITS_TYPER:
+ *data = extract64(s->typer, 0, 32);
+ break;
+ case GITS_TYPER + 4:
+ *data = extract64(s->typer, 32, 32);
+ break;
+ case GITS_CBASER:
+ *data = extract64(s->cbaser, 0, 32);
+ break;
+ case GITS_CBASER + 4:
+ *data = extract64(s->cbaser, 32, 32);
+ break;
+ case GITS_CREADR:
+ *data = extract64(s->creadr, 0, 32);
+ break;
+ case GITS_CREADR + 4:
+ *data = extract64(s->creadr, 32, 32);
+ break;
+ case GITS_CWRITER:
+ *data = extract64(s->cwriter, 0, 32);
+ break;
+ case GITS_CWRITER + 4:
+ *data = extract64(s->cwriter, 32, 32);
+ break;
+ case GITS_BASER ... GITS_BASER + 0x3f:
+ index = (offset - GITS_BASER) / 8;
+ if (offset & 7) {
+ *data = extract64(s->baser[index], 32, 32);
+ } else {
+ *data = extract64(s->baser[index], 0, 32);
+ }
+ break;
+ default:
+ result = MEMTX_ERROR;
+ break;
+ }
return result;
}
@@ -58,7 +352,54 @@ static MemTxResult its_writell(GICv3ITSState *s, hwaddr offset,
uint64_t value, MemTxAttrs attrs)
{
MemTxResult result = MEMTX_OK;
+ int index;
+ switch (offset) {
+ case GITS_BASER ... GITS_BASER + 0x3f:
+ /*
+ * IMPDEF choice:- GITS_BASERn register becomes RO if ITS is
+ * already enabled
+ */
+ if (!(s->ctlr & ITS_CTLR_ENABLED)) {
+ index = (offset - GITS_BASER) / 8;
+ s->baser[index] &= GITS_BASER_RO_MASK;
+ s->baser[index] |= (value & ~GITS_BASER_RO_MASK);
+ }
+ break;
+ case GITS_CBASER:
+ /*
+ * IMPDEF choice:- GITS_CBASER register becomes RO if ITS is
+ * already enabled
+ */
+ if (!(s->ctlr & ITS_CTLR_ENABLED)) {
+ s->cbaser = value;
+ s->creadr = 0;
+ s->cwriter = s->creadr;
+ }
+ break;
+ case GITS_CWRITER:
+ s->cwriter = value & ~R_GITS_CWRITER_RETRY_MASK;
+ break;
+ case GITS_CREADR:
+ if (s->gicv3->gicd_ctlr & GICD_CTLR_DS) {
+ s->creadr = value & ~R_GITS_CREADR_STALLED_MASK;
+ } else {
+ /* RO register, ignore the write */
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid guest write to RO register at offset "
+ TARGET_FMT_plx "\n", __func__, offset);
+ }
+ break;
+ case GITS_TYPER:
+ /* RO registers, ignore the write */
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid guest write to RO register at offset "
+ TARGET_FMT_plx "\n", __func__, offset);
+ break;
+ default:
+ result = MEMTX_ERROR;
+ break;
+ }
return result;
}
@@ -66,7 +407,29 @@ static MemTxResult its_readll(GICv3ITSState *s, hwaddr offset,
uint64_t *data, MemTxAttrs attrs)
{
MemTxResult result = MEMTX_OK;
+ int index;
+ switch (offset) {
+ case GITS_TYPER:
+ *data = s->typer;
+ break;
+ case GITS_BASER ... GITS_BASER + 0x3f:
+ index = (offset - GITS_BASER) / 8;
+ *data = s->baser[index];
+ break;
+ case GITS_CBASER:
+ *data = s->cbaser;
+ break;
+ case GITS_CREADR:
+ *data = s->creadr;
+ break;
+ case GITS_CWRITER:
+ *data = s->cwriter;
+ break;
+ default:
+ result = MEMTX_ERROR;
+ break;
+ }
return result;
}
@@ -170,6 +533,9 @@ static void gicv3_arm_its_realize(DeviceState *dev, Error **errp)
gicv3_its_init_mmio(s, &gicv3_its_control_ops, &gicv3_its_translation_ops);
+ address_space_init(&s->gicv3->dma_as, s->gicv3->dma,
+ "gicv3-its-sysmem");
+
/* set the ITS default features supported */
s->typer = FIELD_DP64(s->typer, GITS_TYPER, PHYSICAL,
GITS_TYPE_PHYSICAL);
@@ -213,6 +579,14 @@ static void gicv3_its_reset(DeviceState *dev)
GITS_CTE_SIZE - 1);
}
+static void gicv3_its_post_load(GICv3ITSState *s)
+{
+ if (s->ctlr & ITS_CTLR_ENABLED) {
+ extract_table_params(s);
+ extract_cmdq_params(s);
+ }
+}
+
static Property gicv3_its_props[] = {
DEFINE_PROP_LINK("parent-gicv3", GICv3ITSState, gicv3, "arm-gicv3",
GICv3State *),
@@ -223,10 +597,12 @@ static void gicv3_its_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
GICv3ITSClass *ic = ARM_GICV3_ITS_CLASS(klass);
+ GICv3ITSCommonClass *icc = ARM_GICV3_ITS_COMMON_CLASS(klass);
dc->realize = gicv3_arm_its_realize;
device_class_set_props(dc, gicv3_its_props);
device_class_set_parent_reset(dc, gicv3_its_reset, &ic->parent_reset);
+ icc->post_load = gicv3_its_post_load;
}
static const TypeInfo gicv3_its_info = {
diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
index 6c0ff0061c..2756561a94 100644
--- a/hw/intc/gicv3_internal.h
+++ b/hw/intc/gicv3_internal.h
@@ -258,6 +258,20 @@ FIELD(GITS_BASER, INNERCACHE, 59, 3)
FIELD(GITS_BASER, INDIRECT, 62, 1)
FIELD(GITS_BASER, VALID, 63, 1)
+FIELD(GITS_CBASER, SIZE, 0, 8)
+FIELD(GITS_CBASER, SHAREABILITY, 10, 2)
+FIELD(GITS_CBASER, PHYADDR, 12, 40)
+FIELD(GITS_CBASER, OUTERCACHE, 53, 3)
+FIELD(GITS_CBASER, INNERCACHE, 59, 3)
+FIELD(GITS_CBASER, VALID, 63, 1)
+
+FIELD(GITS_CREADR, STALLED, 0, 1)
+FIELD(GITS_CREADR, OFFSET, 5, 15)
+
+FIELD(GITS_CWRITER, RETRY, 0, 1)
+FIELD(GITS_CWRITER, OFFSET, 5, 15)
+
+FIELD(GITS_CTLR, ENABLED, 0, 1)
FIELD(GITS_CTLR, QUIESCENT, 31, 1)
FIELD(GITS_TYPER, PHYSICAL, 0, 1)
@@ -269,6 +283,13 @@ FIELD(GITS_TYPER, PTA, 19, 1)
FIELD(GITS_TYPER, CIDBITS, 32, 4)
FIELD(GITS_TYPER, CIL, 36, 1)
+#define GITS_IDREGS 0xFFD0
+
+#define ITS_CTLR_ENABLED (1U) /* ITS Enabled */
+
+#define GITS_BASER_RO_MASK (R_GITS_BASER_ENTRYSIZE_MASK | \
+ R_GITS_BASER_TYPE_MASK)
+
#define GITS_BASER_PAGESIZE_4K 0
#define GITS_BASER_PAGESIZE_16K 1
#define GITS_BASER_PAGESIZE_64K 2
@@ -276,6 +297,14 @@ FIELD(GITS_TYPER, CIL, 36, 1)
#define GITS_BASER_TYPE_DEVICE 1ULL
#define GITS_BASER_TYPE_COLLECTION 4ULL
+#define GITS_PAGE_SIZE_4K 0x1000
+#define GITS_PAGE_SIZE_16K 0x4000
+#define GITS_PAGE_SIZE_64K 0x10000
+
+#define L1TABLE_ENTRY_SIZE 8
+
+#define GITS_CMDQ_ENTRY_SIZE 32
+
/**
* Default features advertised by this version of ITS
*/
diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h
index 91491a2f66..1fd5cedbbd 100644
--- a/include/hw/intc/arm_gicv3_common.h
+++ b/include/hw/intc/arm_gicv3_common.h
@@ -226,6 +226,9 @@ struct GICv3State {
int dev_fd; /* kvm device fd if backed by kvm vgic support */
Error *migration_blocker;
+ MemoryRegion *dma;
+ AddressSpace dma_as;
+
/* Distributor */
/* for a GIC with the security extensions the NS banked version of this
diff --git a/include/hw/intc/arm_gicv3_its_common.h b/include/hw/intc/arm_gicv3_its_common.h
index 65d1191db1..4e79145dde 100644
--- a/include/hw/intc/arm_gicv3_its_common.h
+++ b/include/hw/intc/arm_gicv3_its_common.h
@@ -41,6 +41,25 @@
#define GITS_TRANSLATER 0x0040
+typedef struct {
+ bool valid;
+ bool indirect;
+ uint16_t entry_sz;
+ uint32_t page_sz;
+ uint32_t max_entries;
+ union {
+ uint32_t max_devids;
+ uint32_t max_collids;
+ } maxids;
+ uint64_t base_addr;
+} TableDesc;
+
+typedef struct {
+ bool valid;
+ uint32_t max_entries;
+ uint64_t base_addr;
+} CmdQDesc;
+
struct GICv3ITSState {
SysBusDevice parent_obj;
@@ -63,6 +82,10 @@ struct GICv3ITSState {
uint64_t creadr;
uint64_t baser[8];
+ TableDesc dt;
+ TableDesc ct;
+ CmdQDesc cq;
+
Error *migration_blocker;
};
--
2.27.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v6 03/10] hw/intc: GICv3 ITS command queue framework
2021-07-07 2:18 [PATCH v6 00/10] GICv3 LPI and ITS feature implementation Shashi Mallela
2021-07-07 2:18 ` [PATCH v6 01/10] hw/intc: GICv3 ITS initial framework Shashi Mallela
2021-07-07 2:18 ` [PATCH v6 02/10] hw/intc: GICv3 ITS register definitions added Shashi Mallela
@ 2021-07-07 2:18 ` Shashi Mallela
2021-07-07 2:18 ` [PATCH v6 04/10] hw/intc: GICv3 ITS Command processing Shashi Mallela
` (6 subsequent siblings)
9 siblings, 0 replies; 14+ messages in thread
From: Shashi Mallela @ 2021-07-07 2:18 UTC (permalink / raw)
To: peter.maydell, leif, rad, mst, imammedo; +Cc: eric.auger, qemu-arm, qemu-devel
Added functionality to trigger ITS command queue processing on
write to CWRITE register and process each command queue entry to
identify the command type and handle commands like MAPD,MAPC,SYNC.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
---
hw/intc/arm_gicv3_its.c | 305 +++++++++++++++++++++++++++++++++++++++
hw/intc/gicv3_internal.h | 40 +++++
2 files changed, 345 insertions(+)
diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c
index 683d40182f..05cdc15e77 100644
--- a/hw/intc/arm_gicv3_its.c
+++ b/hw/intc/arm_gicv3_its.c
@@ -50,6 +50,304 @@ static uint64_t baser_base_addr(uint64_t value, uint32_t page_sz)
return result;
}
+static MemTxResult update_cte(GICv3ITSState *s, uint16_t icid, bool valid,
+ uint64_t rdbase)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ uint64_t value;
+ uint64_t l2t_addr;
+ bool valid_l2t;
+ uint32_t l2t_id;
+ uint32_t max_l2_entries;
+ uint64_t cte = 0;
+ MemTxResult res = MEMTX_OK;
+
+ if (!s->ct.valid) {
+ return res;
+ }
+
+ if (valid) {
+ /* add mapping entry to collection table */
+ cte = (valid & TABLE_ENTRY_VALID_MASK) | (rdbase << 1ULL);
+ }
+
+ /*
+ * The specification defines the format of level 1 entries of a
+ * 2-level table, but the format of level 2 entries and the format
+ * of flat-mapped tables is IMPDEF.
+ */
+ if (s->ct.indirect) {
+ l2t_id = icid / (s->ct.page_sz / L1TABLE_ENTRY_SIZE);
+
+ value = address_space_ldq_le(as,
+ s->ct.base_addr +
+ (l2t_id * L1TABLE_ENTRY_SIZE),
+ MEMTXATTRS_UNSPECIFIED, &res);
+
+ if (res != MEMTX_OK) {
+ return res;
+ }
+
+ valid_l2t = (value & L2_TABLE_VALID_MASK) != 0;
+
+ if (valid_l2t) {
+ max_l2_entries = s->ct.page_sz / s->ct.entry_sz;
+
+ l2t_addr = value & ((1ULL << 51) - 1);
+
+ address_space_stq_le(as, l2t_addr +
+ ((icid % max_l2_entries) * GITS_CTE_SIZE),
+ cte, MEMTXATTRS_UNSPECIFIED, &res);
+ }
+ } else {
+ /* Flat level table */
+ address_space_stq_le(as, s->ct.base_addr + (icid * GITS_CTE_SIZE),
+ cte, MEMTXATTRS_UNSPECIFIED, &res);
+ }
+ return res;
+}
+
+static MemTxResult process_mapc(GICv3ITSState *s, uint32_t offset)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ uint16_t icid;
+ uint64_t rdbase;
+ bool valid;
+ MemTxResult res = MEMTX_OK;
+ uint64_t value;
+
+ offset += NUM_BYTES_IN_DW;
+ offset += NUM_BYTES_IN_DW;
+
+ value = address_space_ldq_le(as, s->cq.base_addr + offset,
+ MEMTXATTRS_UNSPECIFIED, &res);
+
+ if (res != MEMTX_OK) {
+ return res;
+ }
+
+ icid = value & ICID_MASK;
+
+ rdbase = (value >> R_MAPC_RDBASE_SHIFT) & RDBASE_PROCNUM_MASK;
+
+ valid = (value & CMD_FIELD_VALID_MASK);
+
+ if ((icid > s->ct.maxids.max_collids) || (rdbase > s->gicv3->num_cpu)) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "ITS MAPC: invalid collection table attributes "
+ "icid %d rdbase %lu\n", icid, rdbase);
+ /*
+ * in this implementation, in case of error
+ * we ignore this command and move onto the next
+ * command in the queue
+ */
+ } else {
+ res = update_cte(s, icid, valid, rdbase);
+ }
+
+ return res;
+}
+
+static MemTxResult update_dte(GICv3ITSState *s, uint32_t devid, bool valid,
+ uint8_t size, uint64_t itt_addr)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ uint64_t value;
+ uint64_t l2t_addr;
+ bool valid_l2t;
+ uint32_t l2t_id;
+ uint32_t max_l2_entries;
+ uint64_t dte = 0;
+ MemTxResult res = MEMTX_OK;
+
+ if (s->dt.valid) {
+ if (valid) {
+ /* add mapping entry to device table */
+ dte = (valid & TABLE_ENTRY_VALID_MASK) |
+ ((size & SIZE_MASK) << 1U) |
+ (itt_addr << GITS_DTE_ITTADDR_SHIFT);
+ }
+ } else {
+ return res;
+ }
+
+ /*
+ * The specification defines the format of level 1 entries of a
+ * 2-level table, but the format of level 2 entries and the format
+ * of flat-mapped tables is IMPDEF.
+ */
+ if (s->dt.indirect) {
+ l2t_id = devid / (s->dt.page_sz / L1TABLE_ENTRY_SIZE);
+
+ value = address_space_ldq_le(as,
+ s->dt.base_addr +
+ (l2t_id * L1TABLE_ENTRY_SIZE),
+ MEMTXATTRS_UNSPECIFIED, &res);
+
+ if (res != MEMTX_OK) {
+ return res;
+ }
+
+ valid_l2t = (value & L2_TABLE_VALID_MASK) != 0;
+
+ if (valid_l2t) {
+ max_l2_entries = s->dt.page_sz / s->dt.entry_sz;
+
+ l2t_addr = value & ((1ULL << 51) - 1);
+
+ address_space_stq_le(as, l2t_addr +
+ ((devid % max_l2_entries) * GITS_DTE_SIZE),
+ dte, MEMTXATTRS_UNSPECIFIED, &res);
+ }
+ } else {
+ /* Flat level table */
+ address_space_stq_le(as, s->dt.base_addr + (devid * GITS_DTE_SIZE),
+ dte, MEMTXATTRS_UNSPECIFIED, &res);
+ }
+ return res;
+}
+
+static MemTxResult process_mapd(GICv3ITSState *s, uint64_t value,
+ uint32_t offset)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ uint32_t devid;
+ uint8_t size;
+ uint64_t itt_addr;
+ bool valid;
+ MemTxResult res = MEMTX_OK;
+
+ devid = ((value & DEVID_MASK) >> DEVID_SHIFT);
+
+ offset += NUM_BYTES_IN_DW;
+ value = address_space_ldq_le(as, s->cq.base_addr + offset,
+ MEMTXATTRS_UNSPECIFIED, &res);
+
+ if (res != MEMTX_OK) {
+ return res;
+ }
+
+ size = (value & SIZE_MASK);
+
+ offset += NUM_BYTES_IN_DW;
+ value = address_space_ldq_le(as, s->cq.base_addr + offset,
+ MEMTXATTRS_UNSPECIFIED, &res);
+
+ if (res != MEMTX_OK) {
+ return res;
+ }
+
+ itt_addr = (value & ITTADDR_MASK) >> ITTADDR_SHIFT;
+
+ valid = (value & CMD_FIELD_VALID_MASK);
+
+ if ((devid > s->dt.maxids.max_devids) ||
+ (size > FIELD_EX64(s->typer, GITS_TYPER, IDBITS))) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "ITS MAPD: invalid device table attributes "
+ "devid %d or size %d\n", devid, size);
+ /*
+ * in this implementation, in case of error
+ * we ignore this command and move onto the next
+ * command in the queue
+ */
+ } else {
+ res = update_dte(s, devid, valid, size, itt_addr);
+ }
+
+ return res;
+}
+
+/*
+ * Current implementation blocks until all
+ * commands are processed
+ */
+static void process_cmdq(GICv3ITSState *s)
+{
+ uint32_t wr_offset = 0;
+ uint32_t rd_offset = 0;
+ uint32_t cq_offset = 0;
+ uint64_t data;
+ AddressSpace *as = &s->gicv3->dma_as;
+ MemTxResult res = MEMTX_OK;
+ uint8_t cmd;
+
+ if (!(s->ctlr & ITS_CTLR_ENABLED)) {
+ return;
+ }
+
+ wr_offset = FIELD_EX64(s->cwriter, GITS_CWRITER, OFFSET);
+
+ if (wr_offset > s->cq.max_entries) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid write offset "
+ "%d\n", __func__, wr_offset);
+ return;
+ }
+
+ rd_offset = FIELD_EX64(s->creadr, GITS_CREADR, OFFSET);
+
+ if (rd_offset > s->cq.max_entries) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid read offset "
+ "%d\n", __func__, rd_offset);
+ return;
+ }
+
+ while (wr_offset != rd_offset) {
+ cq_offset = (rd_offset * GITS_CMDQ_ENTRY_SIZE);
+ data = address_space_ldq_le(as, s->cq.base_addr + cq_offset,
+ MEMTXATTRS_UNSPECIFIED, &res);
+ cmd = (data & CMD_MASK);
+
+ switch (cmd) {
+ case GITS_CMD_INT:
+ break;
+ case GITS_CMD_CLEAR:
+ break;
+ case GITS_CMD_SYNC:
+ /*
+ * Current implementation makes a blocking synchronous call
+ * for every command issued earlier, hence the internal state
+ * is already consistent by the time SYNC command is executed.
+ * Hence no further processing is required for SYNC command.
+ */
+ break;
+ case GITS_CMD_MAPD:
+ res = process_mapd(s, data, cq_offset);
+ break;
+ case GITS_CMD_MAPC:
+ res = process_mapc(s, cq_offset);
+ break;
+ case GITS_CMD_MAPTI:
+ break;
+ case GITS_CMD_MAPI:
+ break;
+ case GITS_CMD_DISCARD:
+ break;
+ case GITS_CMD_INV:
+ case GITS_CMD_INVALL:
+ break;
+ default:
+ break;
+ }
+ if (res == MEMTX_OK) {
+ rd_offset++;
+ rd_offset %= s->cq.max_entries;
+ s->creadr = FIELD_DP64(s->creadr, GITS_CREADR, OFFSET, rd_offset);
+ } else {
+ /*
+ * in this implementation, in case of dma read/write error
+ * we stall the command processing
+ */
+ s->creadr = FIELD_DP64(s->creadr, GITS_CREADR, STALLED, 1);
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: %x cmd processing failed\n", __func__, cmd);
+ break;
+ }
+ }
+}
+
/*
* This function extracts the ITS Device and Collection table specific
* parameters (like base_addr, size etc) from GITS_BASER register.
@@ -206,6 +504,7 @@ static MemTxResult its_writel(GICv3ITSState *s, hwaddr offset,
extract_table_params(s);
extract_cmdq_params(s);
s->creadr = 0;
+ process_cmdq(s);
}
break;
case GITS_CBASER:
@@ -233,6 +532,9 @@ static MemTxResult its_writel(GICv3ITSState *s, hwaddr offset,
case GITS_CWRITER:
s->cwriter = deposit64(s->cwriter, 0, 32,
(value & ~R_GITS_CWRITER_RETRY_MASK));
+ if (s->cwriter != s->creadr) {
+ process_cmdq(s);
+ }
break;
case GITS_CWRITER + 4:
s->cwriter = deposit64(s->cwriter, 32, 32, value);
@@ -379,6 +681,9 @@ static MemTxResult its_writell(GICv3ITSState *s, hwaddr offset,
break;
case GITS_CWRITER:
s->cwriter = value & ~R_GITS_CWRITER_RETRY_MASK;
+ if (s->cwriter != s->creadr) {
+ process_cmdq(s);
+ }
break;
case GITS_CREADR:
if (s->gicv3->gicd_ctlr & GICD_CTLR_DS) {
diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
index 2756561a94..3e149e3877 100644
--- a/hw/intc/gicv3_internal.h
+++ b/hw/intc/gicv3_internal.h
@@ -304,6 +304,43 @@ FIELD(GITS_TYPER, CIL, 36, 1)
#define L1TABLE_ENTRY_SIZE 8
#define GITS_CMDQ_ENTRY_SIZE 32
+#define NUM_BYTES_IN_DW 8
+
+#define CMD_MASK 0xff
+
+/* ITS Commands */
+#define GITS_CMD_CLEAR 0x04
+#define GITS_CMD_DISCARD 0x0F
+#define GITS_CMD_INT 0x03
+#define GITS_CMD_MAPC 0x09
+#define GITS_CMD_MAPD 0x08
+#define GITS_CMD_MAPI 0x0B
+#define GITS_CMD_MAPTI 0x0A
+#define GITS_CMD_INV 0x0C
+#define GITS_CMD_INVALL 0x0D
+#define GITS_CMD_SYNC 0x05
+
+/* MAPC command fields */
+#define ICID_LENGTH 16
+#define ICID_MASK ((1U << ICID_LENGTH) - 1)
+FIELD(MAPC, RDBASE, 16, 32)
+
+#define RDBASE_PROCNUM_LENGTH 16
+#define RDBASE_PROCNUM_MASK ((1ULL << RDBASE_PROCNUM_LENGTH) - 1)
+
+/* MAPD command fields */
+#define ITTADDR_LENGTH 44
+#define ITTADDR_SHIFT 8
+#define ITTADDR_MASK MAKE_64BIT_MASK(ITTADDR_SHIFT, ITTADDR_LENGTH)
+#define SIZE_MASK 0x1f
+
+#define DEVID_SHIFT 32
+#define DEVID_MASK MAKE_64BIT_MASK(32, 32)
+
+#define VALID_SHIFT 63
+#define CMD_FIELD_VALID_MASK (1ULL << VALID_SHIFT)
+#define L2_TABLE_VALID_MASK CMD_FIELD_VALID_MASK
+#define TABLE_ENTRY_VALID_MASK (1ULL << 0)
/**
* Default features advertised by this version of ITS
@@ -338,6 +375,9 @@ FIELD(GITS_TYPER, CIL, 36, 1)
* Valid = 1 bit,ITTAddr = 44 bits,Size = 5 bits
*/
#define GITS_DTE_SIZE (0x8ULL)
+#define GITS_DTE_ITTADDR_SHIFT 6
+#define GITS_DTE_ITTADDR_MASK MAKE_64BIT_MASK(GITS_DTE_ITTADDR_SHIFT, \
+ ITTADDR_LENGTH)
/*
* 8 bytes Collection Table Entry size
--
2.27.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v6 04/10] hw/intc: GICv3 ITS Command processing
2021-07-07 2:18 [PATCH v6 00/10] GICv3 LPI and ITS feature implementation Shashi Mallela
` (2 preceding siblings ...)
2021-07-07 2:18 ` [PATCH v6 03/10] hw/intc: GICv3 ITS command queue framework Shashi Mallela
@ 2021-07-07 2:18 ` Shashi Mallela
2021-07-13 16:11 ` Peter Maydell
2021-07-07 2:18 ` [PATCH v6 05/10] hw/intc: GICv3 ITS Feature enablement Shashi Mallela
` (5 subsequent siblings)
9 siblings, 1 reply; 14+ messages in thread
From: Shashi Mallela @ 2021-07-07 2:18 UTC (permalink / raw)
To: peter.maydell, leif, rad, mst, imammedo; +Cc: eric.auger, qemu-arm, qemu-devel
Added ITS command queue handling for MAPTI,MAPI commands,handled ITS
translation which triggers an LPI via INT command as well as write
to GITS_TRANSLATER register,defined enum to differentiate between ITS
command interrupt trigger and GITS_TRANSLATER based interrupt trigger.
Each of these commands make use of other functionalities implemented to
get device table entry,collection table entry or interrupt translation
table entry required for their processing.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
---
hw/intc/arm_gicv3_its.c | 354 ++++++++++++++++++++++++++++-
hw/intc/gicv3_internal.h | 12 +
include/hw/intc/arm_gicv3_common.h | 2 +
3 files changed, 367 insertions(+), 1 deletion(-)
diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c
index 05cdc15e77..bf92a8d0f1 100644
--- a/hw/intc/arm_gicv3_its.c
+++ b/hw/intc/arm_gicv3_its.c
@@ -29,6 +29,22 @@ struct GICv3ITSClass {
void (*parent_reset)(DeviceState *dev);
};
+/*
+ * This is an internal enum used to distinguish between LPI triggered
+ * via command queue and LPI triggered via gits_translater write.
+ */
+typedef enum ItsCmdType {
+ NONE = 0, /* internal indication for GITS_TRANSLATER write */
+ CLEAR = 1,
+ DISCARD = 2,
+ INT = 3,
+} ItsCmdType;
+
+typedef struct {
+ uint32_t iteh;
+ uint64_t itel;
+} IteEntry;
+
static uint64_t baser_base_addr(uint64_t value, uint32_t page_sz)
{
uint64_t result = 0;
@@ -50,6 +66,323 @@ static uint64_t baser_base_addr(uint64_t value, uint32_t page_sz)
return result;
}
+static bool get_cte(GICv3ITSState *s, uint16_t icid, uint64_t *cte,
+ MemTxResult *res)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ uint64_t l2t_addr;
+ uint64_t value;
+ bool valid_l2t;
+ uint32_t l2t_id;
+ uint32_t max_l2_entries;
+
+ if (s->ct.indirect) {
+ l2t_id = icid / (s->ct.page_sz / L1TABLE_ENTRY_SIZE);
+
+ value = address_space_ldq_le(as,
+ s->ct.base_addr +
+ (l2t_id * L1TABLE_ENTRY_SIZE),
+ MEMTXATTRS_UNSPECIFIED, res);
+
+ if (*res == MEMTX_OK) {
+ valid_l2t = (value & L2_TABLE_VALID_MASK) != 0;
+
+ if (valid_l2t) {
+ max_l2_entries = s->ct.page_sz / s->ct.entry_sz;
+
+ l2t_addr = value & ((1ULL << 51) - 1);
+
+ *cte = address_space_ldq_le(as, l2t_addr +
+ ((icid % max_l2_entries) * GITS_CTE_SIZE),
+ MEMTXATTRS_UNSPECIFIED, res);
+ }
+ }
+ } else {
+ /* Flat level table */
+ *cte = address_space_ldq_le(as, s->ct.base_addr +
+ (icid * GITS_CTE_SIZE),
+ MEMTXATTRS_UNSPECIFIED, res);
+ }
+
+ return (*cte & TABLE_ENTRY_VALID_MASK) != 0;
+}
+
+static MemTxResult update_ite(GICv3ITSState *s, uint32_t eventid, uint64_t dte,
+ IteEntry ite)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ uint64_t itt_addr;
+ MemTxResult res = MEMTX_OK;
+
+ itt_addr = (dte & GITS_DTE_ITTADDR_MASK) >> GITS_DTE_ITTADDR_SHIFT;
+ itt_addr <<= ITTADDR_SHIFT; /* 256 byte aligned */
+
+ address_space_stq_le(as, itt_addr + (eventid * sizeof(uint64_t)),
+ ite.itel, MEMTXATTRS_UNSPECIFIED, &res);
+
+ if (res == MEMTX_OK) {
+ address_space_stl_le(as, itt_addr + ((eventid + sizeof(uint64_t)) *
+ sizeof(uint32_t)), ite.iteh,
+ MEMTXATTRS_UNSPECIFIED, &res);
+ }
+ return res;
+}
+
+static bool get_ite(GICv3ITSState *s, uint32_t eventid, uint64_t dte,
+ uint16_t *icid, uint32_t *pIntid, MemTxResult *res)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ uint64_t itt_addr;
+ bool status = false;
+ IteEntry ite;
+
+ itt_addr = (dte & GITS_DTE_ITTADDR_MASK) >> GITS_DTE_ITTADDR_SHIFT;
+ itt_addr <<= ITTADDR_SHIFT; /* 256 byte aligned */
+
+ memset(&ite, 0 , sizeof(ite));
+ ite.itel = address_space_ldq_le(as, itt_addr +
+ (eventid * sizeof(uint64_t)),
+ MEMTXATTRS_UNSPECIFIED, res);
+
+ if (*res == MEMTX_OK) {
+ ite.iteh = address_space_ldl_le(as, itt_addr + ((eventid +
+ sizeof(uint64_t)) * sizeof(uint32_t)),
+ MEMTXATTRS_UNSPECIFIED, res);
+
+ if (*res == MEMTX_OK) {
+ if (ite.itel & TABLE_ENTRY_VALID_MASK) {
+ if ((ite.itel >> ITE_ENTRY_INTTYPE_SHIFT) &
+ GITS_TYPE_PHYSICAL) {
+ *pIntid = (ite.itel & ITE_ENTRY_INTID_MASK) >>
+ ITE_ENTRY_INTID_SHIFT;
+ *icid = ite.iteh & ITE_ENTRY_ICID_MASK;
+ status = true;
+ }
+ }
+ }
+ }
+ return status;
+}
+
+static uint64_t get_dte(GICv3ITSState *s, uint32_t devid, MemTxResult *res)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ uint64_t l2t_addr;
+ uint64_t value;
+ bool valid_l2t;
+ uint32_t l2t_id;
+ uint32_t max_l2_entries;
+
+ if (s->dt.indirect) {
+ l2t_id = devid / (s->dt.page_sz / L1TABLE_ENTRY_SIZE);
+
+ value = address_space_ldq_le(as,
+ s->dt.base_addr +
+ (l2t_id * L1TABLE_ENTRY_SIZE),
+ MEMTXATTRS_UNSPECIFIED, res);
+
+ if (*res == MEMTX_OK) {
+ valid_l2t = (value & L2_TABLE_VALID_MASK) != 0;
+
+ if (valid_l2t) {
+ max_l2_entries = s->dt.page_sz / s->dt.entry_sz;
+
+ l2t_addr = value & ((1ULL << 51) - 1);
+
+ value = address_space_ldq_le(as, l2t_addr +
+ ((devid % max_l2_entries) * GITS_DTE_SIZE),
+ MEMTXATTRS_UNSPECIFIED, res);
+ }
+ }
+ } else {
+ /* Flat level table */
+ value = address_space_ldq_le(as, s->dt.base_addr +
+ (devid * GITS_DTE_SIZE),
+ MEMTXATTRS_UNSPECIFIED, res);
+ }
+
+ return value;
+}
+
+/*
+ * This function handles the processing of following commands based on
+ * the ItsCmdType parameter passed:-
+ * 1. triggering of lpi interrupt translation via ITS INT command
+ * 2. triggering of lpi interrupt translation via gits_translater register
+ * 3. handling of ITS CLEAR command
+ * 4. handling of ITS DISCARD command
+ */
+static MemTxResult process_its_cmd(GICv3ITSState *s, uint64_t value,
+ uint32_t offset, ItsCmdType cmd)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ uint32_t devid, eventid;
+ MemTxResult res = MEMTX_OK;
+ bool dte_valid;
+ uint64_t dte = 0;
+ uint32_t max_eventid;
+ uint16_t icid = 0;
+ uint32_t pIntid = 0;
+ bool ite_valid = false;
+ uint64_t cte = 0;
+ bool cte_valid = false;
+ IteEntry ite;
+
+ if (cmd == NONE) {
+ devid = offset;
+ } else {
+ devid = ((value & DEVID_MASK) >> DEVID_SHIFT);
+
+ offset += NUM_BYTES_IN_DW;
+ value = address_space_ldq_le(as, s->cq.base_addr + offset,
+ MEMTXATTRS_UNSPECIFIED, &res);
+ }
+
+ if (res != MEMTX_OK) {
+ return res;
+ }
+
+ eventid = (value & EVENTID_MASK);
+
+ dte = get_dte(s, devid, &res);
+
+ if (res != MEMTX_OK) {
+ return res;
+ }
+ dte_valid = dte & TABLE_ENTRY_VALID_MASK;
+
+ if (dte_valid) {
+ max_eventid = (1UL << (((dte >> 1U) & SIZE_MASK) + 1));
+
+ ite_valid = get_ite(s, eventid, dte, &icid, &pIntid, &res);
+
+ if (res != MEMTX_OK) {
+ return res;
+ }
+
+ if (ite_valid) {
+ cte_valid = get_cte(s, icid, &cte, &res);
+ }
+
+ if (res != MEMTX_OK) {
+ return res;
+ }
+ }
+
+ if ((devid > s->dt.maxids.max_devids) || !dte_valid || !ite_valid ||
+ !cte_valid || (eventid > max_eventid)) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid command attributes "
+ "devid %d or eventid %d or invalid dte %d or"
+ "invalid cte %d or invalid ite %d\n",
+ __func__, devid, eventid, dte_valid, cte_valid,
+ ite_valid);
+ /*
+ * in this implementation, in case of error
+ * we ignore this command and move onto the next
+ * command in the queue
+ */
+ } else {
+ /*
+ * Current implementation only supports rdbase == procnum
+ * Hence rdbase physical address is ignored
+ */
+ if (cmd == DISCARD) {
+ memset(&ite, 0 , sizeof(ite));
+ /* remove mapping from interrupt translation table */
+ res = update_ite(s, eventid, dte, ite);
+ }
+ }
+
+ return res;
+}
+
+static MemTxResult process_mapti(GICv3ITSState *s, uint64_t value,
+ uint32_t offset, bool ignore_pInt)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ uint32_t devid, eventid;
+ uint32_t pIntid = 0;
+ uint32_t max_eventid, max_Intid;
+ bool dte_valid;
+ MemTxResult res = MEMTX_OK;
+ uint16_t icid = 0;
+ uint64_t dte = 0;
+ IteEntry ite;
+ uint32_t int_spurious = INTID_SPURIOUS;
+
+ devid = ((value & DEVID_MASK) >> DEVID_SHIFT);
+ offset += NUM_BYTES_IN_DW;
+ value = address_space_ldq_le(as, s->cq.base_addr + offset,
+ MEMTXATTRS_UNSPECIFIED, &res);
+
+ if (res != MEMTX_OK) {
+ return res;
+ }
+
+ eventid = (value & EVENTID_MASK);
+
+ if (!ignore_pInt) {
+ pIntid = ((value & pINTID_MASK) >> pINTID_SHIFT);
+ }
+
+ offset += NUM_BYTES_IN_DW;
+ value = address_space_ldq_le(as, s->cq.base_addr + offset,
+ MEMTXATTRS_UNSPECIFIED, &res);
+
+ if (res != MEMTX_OK) {
+ return res;
+ }
+
+ icid = value & ICID_MASK;
+
+ dte = get_dte(s, devid, &res);
+
+ if (res != MEMTX_OK) {
+ return res;
+ }
+ dte_valid = dte & TABLE_ENTRY_VALID_MASK;
+
+ max_eventid = (1UL << (((dte >> 1U) & SIZE_MASK) + 1));
+
+ if (!ignore_pInt) {
+ max_Intid = (1ULL << (GICD_TYPER_IDBITS + 1));
+ }
+
+ if ((devid > s->dt.maxids.max_devids) || (icid > s->ct.maxids.max_collids)
+ || !dte_valid || (eventid > max_eventid) ||
+ (!ignore_pInt && ((pIntid < GICV3_LPI_INTID_START) ||
+ (pIntid > max_Intid)))) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid command attributes "
+ "devid %d or icid %d or eventid %d or pIntid %d or"
+ "unmapped dte %d\n", __func__, devid, icid, eventid,
+ pIntid, dte_valid);
+ /*
+ * in this implementation, in case of error
+ * we ignore this command and move onto the next
+ * command in the queue
+ */
+ } else {
+ memset(&ite, 0 , sizeof(ite));
+ /* add ite entry to interrupt translation table */
+ ite.itel = (dte_valid & TABLE_ENTRY_VALID_MASK) |
+ (GITS_TYPE_PHYSICAL << ITE_ENTRY_INTTYPE_SHIFT);
+
+ if (ignore_pInt) {
+ ite.itel |= (eventid << ITE_ENTRY_INTID_SHIFT);
+ } else {
+ ite.itel |= (pIntid << ITE_ENTRY_INTID_SHIFT);
+ }
+ ite.itel |= (int_spurious << ITE_ENTRY_INTSP_SHIFT);
+ ite.iteh |= icid;
+
+ res = update_ite(s, eventid, dte, ite);
+ }
+
+ return res;
+}
+
static MemTxResult update_cte(GICv3ITSState *s, uint16_t icid, bool valid,
uint64_t rdbase)
{
@@ -128,7 +461,8 @@ static MemTxResult process_mapc(GICv3ITSState *s, uint32_t offset)
icid = value & ICID_MASK;
- rdbase = (value >> R_MAPC_RDBASE_SHIFT) & RDBASE_PROCNUM_MASK;
+ rdbase = (value & R_MAPC_RDBASE_MASK) >> R_MAPC_RDBASE_SHIFT;
+ rdbase &= RDBASE_PROCNUM_MASK;
valid = (value & CMD_FIELD_VALID_MASK);
@@ -302,8 +636,10 @@ static void process_cmdq(GICv3ITSState *s)
switch (cmd) {
case GITS_CMD_INT:
+ res = process_its_cmd(s, data, cq_offset, INT);
break;
case GITS_CMD_CLEAR:
+ res = process_its_cmd(s, data, cq_offset, CLEAR);
break;
case GITS_CMD_SYNC:
/*
@@ -320,10 +656,13 @@ static void process_cmdq(GICv3ITSState *s)
res = process_mapc(s, cq_offset);
break;
case GITS_CMD_MAPTI:
+ res = process_mapti(s, data, cq_offset, false);
break;
case GITS_CMD_MAPI:
+ res = process_mapti(s, data, cq_offset, true);
break;
case GITS_CMD_DISCARD:
+ res = process_its_cmd(s, data, cq_offset, DISCARD);
break;
case GITS_CMD_INV:
case GITS_CMD_INVALL:
@@ -485,7 +824,20 @@ static MemTxResult gicv3_its_translation_write(void *opaque, hwaddr offset,
uint64_t data, unsigned size,
MemTxAttrs attrs)
{
+ GICv3ITSState *s = (GICv3ITSState *)opaque;
MemTxResult result = MEMTX_OK;
+ uint32_t devid = 0;
+
+ switch (offset) {
+ case GITS_TRANSLATER:
+ if (s->ctlr & ITS_CTLR_ENABLED) {
+ devid = attrs.requester_id;
+ result = process_its_cmd(s, data, devid, NONE);
+ }
+ break;
+ default:
+ break;
+ }
return result;
}
diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
index 3e149e3877..6e0343b0e2 100644
--- a/hw/intc/gicv3_internal.h
+++ b/hw/intc/gicv3_internal.h
@@ -334,6 +334,13 @@ FIELD(MAPC, RDBASE, 16, 32)
#define ITTADDR_MASK MAKE_64BIT_MASK(ITTADDR_SHIFT, ITTADDR_LENGTH)
#define SIZE_MASK 0x1f
+/* MAPI command fields */
+#define EVENTID_MASK ((1ULL << 32) - 1)
+
+/* MAPTI command fields */
+#define pINTID_SHIFT 32
+#define pINTID_MASK MAKE_64BIT_MASK(32, 32)
+
#define DEVID_SHIFT 32
#define DEVID_MASK MAKE_64BIT_MASK(32, 32)
@@ -360,6 +367,11 @@ FIELD(MAPC, RDBASE, 16, 32)
* vPEID = 16 bits
*/
#define ITS_ITT_ENTRY_SIZE 0xC
+#define ITE_ENTRY_INTTYPE_SHIFT 1
+#define ITE_ENTRY_INTID_SHIFT 2
+#define ITE_ENTRY_INTID_MASK MAKE_64BIT_MASK(2, 24)
+#define ITE_ENTRY_INTSP_SHIFT 26
+#define ITE_ENTRY_ICID_MASK MAKE_64BIT_MASK(0, 16)
/* 16 bits EventId */
#define ITS_IDBITS GICD_TYPER_IDBITS
diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h
index 1fd5cedbbd..0715b0bc2a 100644
--- a/include/hw/intc/arm_gicv3_common.h
+++ b/include/hw/intc/arm_gicv3_common.h
@@ -36,6 +36,8 @@
#define GICV3_MAXIRQ 1020
#define GICV3_MAXSPI (GICV3_MAXIRQ - GIC_INTERNAL)
+#define GICV3_LPI_INTID_START 8192
+
#define GICV3_REDIST_SIZE 0x20000
/* Number of SGI target-list bits */
--
2.27.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v6 05/10] hw/intc: GICv3 ITS Feature enablement
2021-07-07 2:18 [PATCH v6 00/10] GICv3 LPI and ITS feature implementation Shashi Mallela
` (3 preceding siblings ...)
2021-07-07 2:18 ` [PATCH v6 04/10] hw/intc: GICv3 ITS Command processing Shashi Mallela
@ 2021-07-07 2:18 ` Shashi Mallela
2021-07-07 2:18 ` [PATCH v6 06/10] hw/intc: GICv3 redistributor ITS processing Shashi Mallela
` (4 subsequent siblings)
9 siblings, 0 replies; 14+ messages in thread
From: Shashi Mallela @ 2021-07-07 2:18 UTC (permalink / raw)
To: peter.maydell, leif, rad, mst, imammedo; +Cc: eric.auger, qemu-arm, qemu-devel
Added properties to enable ITS feature and define qemu system
address space memory in gicv3 common,setup distributor and
redistributor registers to indicate LPI support.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/intc/arm_gicv3_common.c | 12 ++++++++++++
hw/intc/arm_gicv3_dist.c | 5 ++++-
hw/intc/arm_gicv3_redist.c | 12 +++++++++---
hw/intc/gicv3_internal.h | 2 ++
include/hw/intc/arm_gicv3_common.h | 1 +
5 files changed, 28 insertions(+), 4 deletions(-)
diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c
index 58ef65f589..53dea2a775 100644
--- a/hw/intc/arm_gicv3_common.c
+++ b/hw/intc/arm_gicv3_common.c
@@ -345,6 +345,11 @@ static void arm_gicv3_common_realize(DeviceState *dev, Error **errp)
return;
}
+ if (s->lpi_enable && !s->dma) {
+ error_setg(errp, "Redist-ITS: Guest 'sysmem' reference link not set");
+ return;
+ }
+
s->cpu = g_new0(GICv3CPUState, s->num_cpu);
for (i = 0; i < s->num_cpu; i++) {
@@ -381,6 +386,10 @@ static void arm_gicv3_common_realize(DeviceState *dev, Error **errp)
(1 << 24) |
(i << 8) |
(last << 4);
+
+ if (s->lpi_enable) {
+ s->cpu[i].gicr_typer |= GICR_TYPER_PLPIS;
+ }
}
}
@@ -494,9 +503,12 @@ static Property arm_gicv3_common_properties[] = {
DEFINE_PROP_UINT32("num-cpu", GICv3State, num_cpu, 1),
DEFINE_PROP_UINT32("num-irq", GICv3State, num_irq, 32),
DEFINE_PROP_UINT32("revision", GICv3State, revision, 3),
+ DEFINE_PROP_BOOL("has-lpi", GICv3State, lpi_enable, 0),
DEFINE_PROP_BOOL("has-security-extensions", GICv3State, security_extn, 0),
DEFINE_PROP_ARRAY("redist-region-count", GICv3State, nb_redist_regions,
redist_region_count, qdev_prop_uint32, uint32_t),
+ DEFINE_PROP_LINK("sysmem", GICv3State, dma, TYPE_MEMORY_REGION,
+ MemoryRegion *),
DEFINE_PROP_END_OF_LIST(),
};
diff --git a/hw/intc/arm_gicv3_dist.c b/hw/intc/arm_gicv3_dist.c
index b65f56f903..43128b376d 100644
--- a/hw/intc/arm_gicv3_dist.c
+++ b/hw/intc/arm_gicv3_dist.c
@@ -371,7 +371,9 @@ static MemTxResult gicd_readl(GICv3State *s, hwaddr offset,
* A3V == 1 (non-zero values of Affinity level 3 supported)
* IDbits == 0xf (we support 16-bit interrupt identifiers)
* DVIS == 0 (Direct virtual LPI injection not supported)
- * LPIS == 0 (LPIs not supported)
+ * LPIS == 1 (LPIs are supported if affinity routing is enabled)
+ * num_LPIs == 0b00000 (bits [15:11],Number of LPIs as indicated
+ * by GICD_TYPER.IDbits)
* MBIS == 0 (message-based SPIs not supported)
* SecurityExtn == 1 if security extns supported
* CPUNumber == 0 since for us ARE is always 1
@@ -386,6 +388,7 @@ static MemTxResult gicd_readl(GICv3State *s, hwaddr offset,
bool sec_extn = !(s->gicd_ctlr & GICD_CTLR_DS);
*data = (1 << 25) | (1 << 24) | (sec_extn << 10) |
+ (s->lpi_enable << GICD_TYPER_LPIS_SHIFT) |
(0xf << 19) | itlinesnumber;
return MEMTX_OK;
}
diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c
index 8645220d61..fc3d95dcc6 100644
--- a/hw/intc/arm_gicv3_redist.c
+++ b/hw/intc/arm_gicv3_redist.c
@@ -248,10 +248,16 @@ static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr offset,
case GICR_CTLR:
/* For our implementation, GICR_TYPER.DPGS is 0 and so all
* the DPG bits are RAZ/WI. We don't do anything asynchronously,
- * so UWP and RWP are RAZ/WI. And GICR_TYPER.LPIS is 0 (we don't
- * implement LPIs) so Enable_LPIs is RES0. So there are no writable
- * bits for us.
+ * so UWP and RWP are RAZ/WI. GICR_TYPER.LPIS is 1 (we
+ * implement LPIs) so Enable_LPIs is programmable.
*/
+ if (cs->gicr_typer & GICR_TYPER_PLPIS) {
+ if (value & GICR_CTLR_ENABLE_LPIS) {
+ cs->gicr_ctlr |= GICR_CTLR_ENABLE_LPIS;
+ } else {
+ cs->gicr_ctlr &= ~GICR_CTLR_ENABLE_LPIS;
+ }
+ }
return MEMTX_OK;
case GICR_STATUSR:
/* RAZ/WI for our implementation */
diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
index 6e0343b0e2..b27e25dea3 100644
--- a/hw/intc/gicv3_internal.h
+++ b/hw/intc/gicv3_internal.h
@@ -68,6 +68,8 @@
#define GICD_CTLR_E1NWF (1U << 7)
#define GICD_CTLR_RWP (1U << 31)
+#define GICD_TYPER_LPIS_SHIFT 17
+
/* 16 bits EventId */
#define GICD_TYPER_IDBITS 0xf
diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h
index 0715b0bc2a..c1348cc60a 100644
--- a/include/hw/intc/arm_gicv3_common.h
+++ b/include/hw/intc/arm_gicv3_common.h
@@ -221,6 +221,7 @@ struct GICv3State {
uint32_t num_cpu;
uint32_t num_irq;
uint32_t revision;
+ bool lpi_enable;
bool security_extn;
bool irq_reset_nonsecure;
bool gicd_no_migration_shift_bug;
--
2.27.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v6 06/10] hw/intc: GICv3 redistributor ITS processing
2021-07-07 2:18 [PATCH v6 00/10] GICv3 LPI and ITS feature implementation Shashi Mallela
` (4 preceding siblings ...)
2021-07-07 2:18 ` [PATCH v6 05/10] hw/intc: GICv3 ITS Feature enablement Shashi Mallela
@ 2021-07-07 2:18 ` Shashi Mallela
2021-07-13 16:45 ` Peter Maydell
2021-07-07 2:18 ` [PATCH v6 07/10] hw/arm/sbsa-ref: add ITS support in SBSA GIC Shashi Mallela
` (3 subsequent siblings)
9 siblings, 1 reply; 14+ messages in thread
From: Shashi Mallela @ 2021-07-07 2:18 UTC (permalink / raw)
To: peter.maydell, leif, rad, mst, imammedo; +Cc: eric.auger, qemu-arm, qemu-devel
Implemented lpi processing at redistributor to get lpi config info
from lpi configuration table,determine priority,set pending state in
lpi pending table and forward the lpi to cpuif.Added logic to invoke
redistributor lpi processing with translated LPI which set/clear LPI
from ITS device as part of ITS INT,CLEAR,DISCARD command and
GITS_TRANSLATER processing.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
---
hw/intc/arm_gicv3.c | 14 +++
hw/intc/arm_gicv3_common.c | 1 +
hw/intc/arm_gicv3_cpuif.c | 7 +-
hw/intc/arm_gicv3_its.c | 23 +++++
hw/intc/arm_gicv3_redist.c | 142 +++++++++++++++++++++++++++++
hw/intc/gicv3_internal.h | 9 ++
include/hw/intc/arm_gicv3_common.h | 7 ++
7 files changed, 201 insertions(+), 2 deletions(-)
diff --git a/hw/intc/arm_gicv3.c b/hw/intc/arm_gicv3.c
index d63f8af604..3f24707838 100644
--- a/hw/intc/arm_gicv3.c
+++ b/hw/intc/arm_gicv3.c
@@ -165,6 +165,16 @@ static void gicv3_redist_update_noirqset(GICv3CPUState *cs)
cs->hppi.grp = gicv3_irq_group(cs->gic, cs, cs->hppi.irq);
}
+ if ((cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) && cs->gic->lpi_enable &&
+ (cs->hpplpi.prio != 0xff)) {
+ if (irqbetter(cs, cs->hpplpi.irq, cs->hpplpi.prio)) {
+ cs->hppi.irq = cs->hpplpi.irq;
+ cs->hppi.prio = cs->hpplpi.prio;
+ cs->hppi.grp = cs->hpplpi.grp;
+ seenbetter = true;
+ }
+ }
+
/* If the best interrupt we just found would preempt whatever
* was the previous best interrupt before this update, then
* we know it's definitely the best one now.
@@ -339,9 +349,13 @@ static void gicv3_set_irq(void *opaque, int irq, int level)
static void arm_gicv3_post_load(GICv3State *s)
{
+ int i;
/* Recalculate our cached idea of the current highest priority
* pending interrupt, but don't set IRQ or FIQ lines.
*/
+ for (i = 0; i < s->num_cpu; i++) {
+ gicv3_redist_update_lpi(&s->cpu[i]);
+ }
gicv3_full_update_noirqset(s);
/* Repopulate the cache of GICv3CPUState pointers for target CPUs */
gicv3_cache_all_target_cpustates(s);
diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c
index 53dea2a775..223db16fec 100644
--- a/hw/intc/arm_gicv3_common.c
+++ b/hw/intc/arm_gicv3_common.c
@@ -435,6 +435,7 @@ static void arm_gicv3_common_reset(DeviceState *dev)
memset(cs->gicr_ipriorityr, 0, sizeof(cs->gicr_ipriorityr));
cs->hppi.prio = 0xff;
+ cs->hpplpi.prio = 0xff;
/* State in the CPU interface must *not* be reset here, because it
* is part of the CPU's reset domain, not the GIC device's.
diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c
index 3e0641aff9..184b92e7de 100644
--- a/hw/intc/arm_gicv3_cpuif.c
+++ b/hw/intc/arm_gicv3_cpuif.c
@@ -899,10 +899,12 @@ static void icc_activate_irq(GICv3CPUState *cs, int irq)
cs->gicr_iactiver0 = deposit32(cs->gicr_iactiver0, irq, 1, 1);
cs->gicr_ipendr0 = deposit32(cs->gicr_ipendr0, irq, 1, 0);
gicv3_redist_update(cs);
- } else {
+ } else if (irq < GICV3_LPI_INTID_START) {
gicv3_gicd_active_set(cs->gic, irq);
gicv3_gicd_pending_clear(cs->gic, irq);
gicv3_update(cs->gic, irq, 1);
+ } else {
+ gicv3_redist_lpi_pending(cs, irq, 0);
}
}
@@ -1318,7 +1320,8 @@ static void icc_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri,
trace_gicv3_icc_eoir_write(is_eoir0 ? 0 : 1,
gicv3_redist_affid(cs), value);
- if (irq >= cs->gic->num_irq) {
+ if ((irq >= cs->gic->num_irq) &&
+ !(cs->gic->lpi_enable && (irq >= GICV3_LPI_INTID_START))) {
/* This handles two cases:
* 1. If software writes the ID of a spurious interrupt [ie 1020-1023]
* to the GICC_EOIR, the GIC ignores that write.
diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c
index bf92a8d0f1..20f85a3759 100644
--- a/hw/intc/arm_gicv3_its.c
+++ b/hw/intc/arm_gicv3_its.c
@@ -226,6 +226,7 @@ static MemTxResult process_its_cmd(GICv3ITSState *s, uint64_t value,
bool ite_valid = false;
uint64_t cte = 0;
bool cte_valid = false;
+ uint64_t rdbase;
IteEntry ite;
if (cmd == NONE) {
@@ -287,6 +288,18 @@ static MemTxResult process_its_cmd(GICv3ITSState *s, uint64_t value,
* Current implementation only supports rdbase == procnum
* Hence rdbase physical address is ignored
*/
+ rdbase = (cte & GITS_CTE_RDBASE_PROCNUM_MASK) >> 1U;
+
+ if (rdbase > s->gicv3->num_cpu) {
+ return res;
+ }
+
+ if ((cmd == CLEAR) || (cmd == DISCARD)) {
+ gicv3_redist_process_lpi(&s->gicv3->cpu[rdbase], pIntid, 0);
+ } else {
+ gicv3_redist_process_lpi(&s->gicv3->cpu[rdbase], pIntid, 1);
+ }
+
if (cmd == DISCARD) {
memset(&ite, 0 , sizeof(ite));
/* remove mapping from interrupt translation table */
@@ -605,6 +618,7 @@ static void process_cmdq(GICv3ITSState *s)
AddressSpace *as = &s->gicv3->dma_as;
MemTxResult res = MEMTX_OK;
uint8_t cmd;
+ int i;
if (!(s->ctlr & ITS_CTLR_ENABLED)) {
return;
@@ -666,6 +680,15 @@ static void process_cmdq(GICv3ITSState *s)
break;
case GITS_CMD_INV:
case GITS_CMD_INVALL:
+ /*
+ * Current implementation doesn't cache any ITS tables,
+ * but the calculated lpi priority information. We only
+ * need to trigger lpi priority re-calculation to be in
+ * sync with LPI config table or pending table changes.
+ */
+ for (i = 0; i < s->gicv3->num_cpu; i++) {
+ gicv3_redist_update_lpi(&s->gicv3->cpu[i]);
+ }
break;
default:
break;
diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c
index fc3d95dcc6..061b4e1ad2 100644
--- a/hw/intc/arm_gicv3_redist.c
+++ b/hw/intc/arm_gicv3_redist.c
@@ -254,6 +254,9 @@ static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr offset,
if (cs->gicr_typer & GICR_TYPER_PLPIS) {
if (value & GICR_CTLR_ENABLE_LPIS) {
cs->gicr_ctlr |= GICR_CTLR_ENABLE_LPIS;
+ /* Check for any pending interr in pending table */
+ gicv3_redist_update_lpi(cs);
+ gicv3_redist_update(cs);
} else {
cs->gicr_ctlr &= ~GICR_CTLR_ENABLE_LPIS;
}
@@ -532,6 +535,145 @@ MemTxResult gicv3_redist_write(void *opaque, hwaddr offset, uint64_t data,
return r;
}
+static void gicv3_redist_check_lpi_priority(GICv3CPUState *cs, int irq)
+{
+ AddressSpace *as = &cs->gic->dma_as;
+ uint64_t lpict_baddr;
+ uint8_t lpite;
+ uint8_t prio;
+
+ lpict_baddr = cs->gicr_propbaser & R_GICR_PROPBASER_PHYADDR_MASK;
+
+ address_space_read(as, lpict_baddr + ((irq - GICV3_LPI_INTID_START) *
+ sizeof(lpite)), MEMTXATTRS_UNSPECIFIED, &lpite,
+ sizeof(lpite));
+
+ if (!(lpite & LPI_CTE_ENABLED)) {
+ return;
+ }
+
+ if (cs->gic->gicd_ctlr & GICD_CTLR_DS) {
+ prio = lpite & LPI_PRIORITY_MASK;
+ } else {
+ prio = ((lpite & LPI_PRIORITY_MASK) >> 1) | 0x80;
+ }
+
+ if ((prio < cs->hpplpi.prio) ||
+ ((prio == cs->hpplpi.prio) && (irq <= cs->hpplpi.irq))) {
+ cs->hpplpi.irq = irq;
+ cs->hpplpi.prio = prio;
+ /* LPIs are always non-secure Grp1 interrupts */
+ cs->hpplpi.grp = GICV3_G1NS;
+ }
+}
+
+void gicv3_redist_update_lpi(GICv3CPUState *cs)
+{
+ /*
+ * This function scans the LPI pending table and for each pending
+ * LPI, reads the corresponding entry from LPI configuration table
+ * to extract the priority info and determine if the current LPI
+ * priority is lower than the last computed high priority lpi interrupt.
+ * If yes, replace current LPI as the new high priority lpi interrupt.
+ */
+ AddressSpace *as = &cs->gic->dma_as;
+ uint64_t lpipt_baddr;
+ uint32_t pendt_size = 0;
+ uint8_t pend;
+ int i;
+ uint64_t idbits;
+
+ idbits = MIN(FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER, IDBITS),
+ GICD_TYPER_IDBITS);
+
+ if (!(cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) || !cs->gicr_propbaser ||
+ !cs->gicr_pendbaser || (idbits < GICR_PROPBASER_IDBITS_THRESHOLD)) {
+ return;
+ }
+
+ cs->hpplpi.prio = 0xff;
+
+ lpipt_baddr = cs->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK;
+
+ /* Determine the highest priority pending interrupt among LPIs */
+ pendt_size = (1ULL << (idbits + 1));
+
+ for (i = 0; i < pendt_size / 8; i++) {
+ address_space_read(as, lpipt_baddr +
+ (((GICV3_LPI_INTID_START + i) / 8) * sizeof(pend)),
+ MEMTXATTRS_UNSPECIFIED, &pend, sizeof(pend));
+
+ if (!((1 << ((GICV3_LPI_INTID_START + i) % 8)) & pend)) {
+ continue;
+ }
+
+ gicv3_redist_check_lpi_priority(cs, GICV3_LPI_INTID_START + i);
+ }
+}
+
+void gicv3_redist_lpi_pending(GICv3CPUState *cs, int irq, int level)
+{
+ /*
+ * This function updates the pending bit in lpi pending table for
+ * the irq being activated or deactivated.
+ */
+ AddressSpace *as = &cs->gic->dma_as;
+ uint64_t lpipt_baddr;
+ bool ispend = false;
+ uint8_t pend;
+
+ /*
+ * get the bit value corresponding to this irq in the
+ * lpi pending table
+ */
+ lpipt_baddr = cs->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK;
+
+ address_space_read(as, lpipt_baddr + ((irq / 8) * sizeof(pend)),
+ MEMTXATTRS_UNSPECIFIED, &pend, sizeof(pend));
+
+ ispend = extract32(pend, irq % 8, 1);
+
+ /* no change in the value of pending bit, return */
+ if (ispend == level) {
+ return;
+ }
+ pend = deposit32(pend, irq % 8, 1, level ? 1 : 0);
+
+ address_space_write(as, lpipt_baddr + ((irq / 8) * sizeof(pend)),
+ MEMTXATTRS_UNSPECIFIED, &pend, sizeof(pend));
+
+ /*
+ * check if this LPI is better than the current hpplpi, if yes
+ * just set hpplpi.prio and .irq without doing a full rescan
+ */
+ if (level) {
+ gicv3_redist_check_lpi_priority(cs, irq);
+ } else {
+ if (irq == cs->hpplpi.irq) {
+ gicv3_redist_update_lpi(cs);
+ }
+ }
+}
+
+void gicv3_redist_process_lpi(GICv3CPUState *cs, int irq, int level)
+{
+ uint64_t idbits;
+
+ idbits = MIN(FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER, IDBITS),
+ GICD_TYPER_IDBITS);
+
+ if (!(cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) || !cs->gicr_propbaser ||
+ !cs->gicr_pendbaser || (idbits < GICR_PROPBASER_IDBITS_THRESHOLD) ||
+ (irq > (1ULL << (idbits + 1)))) {
+ return;
+ }
+
+ /* set/clear the pending bit for this irq */
+ gicv3_redist_lpi_pending(cs, irq, level);
+
+ gicv3_redist_update(cs);
+}
+
void gicv3_redist_set_irq(GICv3CPUState *cs, int irq, int level)
{
/* Update redistributor state for a change in an external PPI input line */
diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
index b27e25dea3..fbd99a576c 100644
--- a/hw/intc/gicv3_internal.h
+++ b/hw/intc/gicv3_internal.h
@@ -140,6 +140,8 @@ FIELD(GICR_PENDBASER, PHYADDR, 16, 36)
FIELD(GICR_PENDBASER, OUTERCACHE, 56, 3)
FIELD(GICR_PENDBASER, PTZ, 62, 1)
+#define GICR_PROPBASER_IDBITS_THRESHOLD 0xd
+
#define ICC_CTLR_EL1_CBPR (1U << 0)
#define ICC_CTLR_EL1_EOIMODE (1U << 1)
#define ICC_CTLR_EL1_PMHE (1U << 6)
@@ -305,6 +307,9 @@ FIELD(GITS_TYPER, CIL, 36, 1)
#define L1TABLE_ENTRY_SIZE 8
+#define LPI_CTE_ENABLED TABLE_ENTRY_VALID_MASK
+#define LPI_PRIORITY_MASK 0xfc
+
#define GITS_CMDQ_ENTRY_SIZE 32
#define NUM_BYTES_IN_DW 8
@@ -398,6 +403,7 @@ FIELD(MAPC, RDBASE, 16, 32)
* Valid = 1 bit,RDBase = 36 bits(considering max RDBASE)
*/
#define GITS_CTE_SIZE (0x8ULL)
+#define GITS_CTE_RDBASE_PROCNUM_MASK MAKE_64BIT_MASK(1, RDBASE_PROCNUM_LENGTH)
/* Special interrupt IDs */
#define INTID_SECURE 1020
@@ -456,6 +462,9 @@ MemTxResult gicv3_redist_write(void *opaque, hwaddr offset, uint64_t data,
unsigned size, MemTxAttrs attrs);
void gicv3_dist_set_irq(GICv3State *s, int irq, int level);
void gicv3_redist_set_irq(GICv3CPUState *cs, int irq, int level);
+void gicv3_redist_process_lpi(GICv3CPUState *cs, int irq, int level);
+void gicv3_redist_lpi_pending(GICv3CPUState *cs, int irq, int level);
+void gicv3_redist_update_lpi(GICv3CPUState *cs);
void gicv3_redist_send_sgi(GICv3CPUState *cs, int grp, int irq, bool ns);
void gicv3_init_cpuif(GICv3State *s);
diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h
index c1348cc60a..aa4f0d6770 100644
--- a/include/hw/intc/arm_gicv3_common.h
+++ b/include/hw/intc/arm_gicv3_common.h
@@ -204,6 +204,13 @@ struct GICv3CPUState {
* real state above; it doesn't need to be migrated.
*/
PendingIrq hppi;
+
+ /*
+ * Cached information recalculated from LPI tables
+ * in guest memory
+ */
+ PendingIrq hpplpi;
+
/* This is temporary working state, to avoid a malloc in gicv3_update() */
bool seenbetter;
};
--
2.27.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v6 07/10] hw/arm/sbsa-ref: add ITS support in SBSA GIC
2021-07-07 2:18 [PATCH v6 00/10] GICv3 LPI and ITS feature implementation Shashi Mallela
` (5 preceding siblings ...)
2021-07-07 2:18 ` [PATCH v6 06/10] hw/intc: GICv3 redistributor ITS processing Shashi Mallela
@ 2021-07-07 2:18 ` Shashi Mallela
2021-07-07 2:18 ` [PATCH v6 08/10] tests/data/acpi/virt: Add IORT files for ITS Shashi Mallela
` (2 subsequent siblings)
9 siblings, 0 replies; 14+ messages in thread
From: Shashi Mallela @ 2021-07-07 2:18 UTC (permalink / raw)
To: peter.maydell, leif, rad, mst, imammedo; +Cc: eric.auger, qemu-arm, qemu-devel
Included creation of ITS as part of SBSA platform GIC
initialization.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
---
hw/arm/sbsa-ref.c | 26 +++++++++++++++++++++++---
1 file changed, 23 insertions(+), 3 deletions(-)
diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c
index 43c19b4923..3d9c073636 100644
--- a/hw/arm/sbsa-ref.c
+++ b/hw/arm/sbsa-ref.c
@@ -34,7 +34,7 @@
#include "hw/boards.h"
#include "hw/ide/internal.h"
#include "hw/ide/ahci_internal.h"
-#include "hw/intc/arm_gicv3_common.h"
+#include "hw/intc/arm_gicv3_its_common.h"
#include "hw/loader.h"
#include "hw/pci-host/gpex.h"
#include "hw/qdev-properties.h"
@@ -64,6 +64,7 @@ enum {
SBSA_CPUPERIPHS,
SBSA_GIC_DIST,
SBSA_GIC_REDIST,
+ SBSA_GIC_ITS,
SBSA_SECURE_EC,
SBSA_GWDT,
SBSA_GWDT_REFRESH,
@@ -107,6 +108,7 @@ static const MemMapEntry sbsa_ref_memmap[] = {
[SBSA_CPUPERIPHS] = { 0x40000000, 0x00040000 },
[SBSA_GIC_DIST] = { 0x40060000, 0x00010000 },
[SBSA_GIC_REDIST] = { 0x40080000, 0x04000000 },
+ [SBSA_GIC_ITS] = { 0x44090000, 0x00020000 },
[SBSA_SECURE_EC] = { 0x50000000, 0x00001000 },
[SBSA_GWDT_REFRESH] = { 0x50010000, 0x00001000 },
[SBSA_GWDT_CONTROL] = { 0x50011000, 0x00001000 },
@@ -377,7 +379,20 @@ static void create_secure_ram(SBSAMachineState *sms,
memory_region_add_subregion(secure_sysmem, base, secram);
}
-static void create_gic(SBSAMachineState *sms)
+static void create_its(SBSAMachineState *sms)
+{
+ DeviceState *dev;
+
+ dev = qdev_new(TYPE_ARM_GICV3_ITS);
+ SysBusDevice *s = SYS_BUS_DEVICE(dev);
+
+ object_property_set_link(OBJECT(dev), "parent-gicv3", OBJECT(sms->gic),
+ &error_abort);
+ sysbus_realize_and_unref(s, &error_fatal);
+ sysbus_mmio_map(s, 0, sbsa_ref_memmap[SBSA_GIC_ITS].base);
+}
+
+static void create_gic(SBSAMachineState *sms, MemoryRegion *mem)
{
unsigned int smp_cpus = MACHINE(sms)->smp.cpus;
SysBusDevice *gicbusdev;
@@ -404,6 +419,10 @@ static void create_gic(SBSAMachineState *sms)
qdev_prop_set_uint32(sms->gic, "len-redist-region-count", 1);
qdev_prop_set_uint32(sms->gic, "redist-region-count[0]", redist0_count);
+ object_property_set_link(OBJECT(sms->gic), "sysmem", OBJECT(mem),
+ &error_fatal);
+ qdev_prop_set_bit(sms->gic, "has-lpi", true);
+
gicbusdev = SYS_BUS_DEVICE(sms->gic);
sysbus_realize_and_unref(gicbusdev, &error_fatal);
sysbus_mmio_map(gicbusdev, 0, sbsa_ref_memmap[SBSA_GIC_DIST].base);
@@ -450,6 +469,7 @@ static void create_gic(SBSAMachineState *sms)
sysbus_connect_irq(gicbusdev, i + 3 * smp_cpus,
qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
}
+ create_its(sms);
}
static void create_uart(const SBSAMachineState *sms, int uart,
@@ -762,7 +782,7 @@ static void sbsa_ref_init(MachineState *machine)
create_secure_ram(sms, secure_sysmem);
- create_gic(sms);
+ create_gic(sms, sysmem);
create_uart(sms, SBSA_UART, sysmem, serial_hd(0));
create_uart(sms, SBSA_SECURE_UART, secure_sysmem, serial_hd(1));
--
2.27.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v6 08/10] tests/data/acpi/virt: Add IORT files for ITS
2021-07-07 2:18 [PATCH v6 00/10] GICv3 LPI and ITS feature implementation Shashi Mallela
` (6 preceding siblings ...)
2021-07-07 2:18 ` [PATCH v6 07/10] hw/arm/sbsa-ref: add ITS support in SBSA GIC Shashi Mallela
@ 2021-07-07 2:18 ` Shashi Mallela
2021-07-07 2:18 ` [PATCH v6 09/10] hw/arm/virt: add ITS support in virt GIC Shashi Mallela
2021-07-07 2:18 ` [PATCH v6 10/10] tests/data/acpi/virt: Update IORT files for ITS Shashi Mallela
9 siblings, 0 replies; 14+ messages in thread
From: Shashi Mallela @ 2021-07-07 2:18 UTC (permalink / raw)
To: peter.maydell, leif, rad, mst, imammedo; +Cc: eric.auger, qemu-arm, qemu-devel
Added expected IORT files applicable with latest GICv3
ITS changes.Temporarily differences in these files are
okay.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
---
tests/data/acpi/virt/IORT | 0
tests/data/acpi/virt/IORT.memhp | 0
tests/data/acpi/virt/IORT.numamem | 0
tests/data/acpi/virt/IORT.pxb | 0
tests/qtest/bios-tables-test-allowed-diff.h | 4 ++++
5 files changed, 4 insertions(+)
create mode 100644 tests/data/acpi/virt/IORT
create mode 100644 tests/data/acpi/virt/IORT.memhp
create mode 100644 tests/data/acpi/virt/IORT.numamem
create mode 100644 tests/data/acpi/virt/IORT.pxb
diff --git a/tests/data/acpi/virt/IORT b/tests/data/acpi/virt/IORT
new file mode 100644
index 0000000000..e69de29bb2
diff --git a/tests/data/acpi/virt/IORT.memhp b/tests/data/acpi/virt/IORT.memhp
new file mode 100644
index 0000000000..e69de29bb2
diff --git a/tests/data/acpi/virt/IORT.numamem b/tests/data/acpi/virt/IORT.numamem
new file mode 100644
index 0000000000..e69de29bb2
diff --git a/tests/data/acpi/virt/IORT.pxb b/tests/data/acpi/virt/IORT.pxb
new file mode 100644
index 0000000000..e69de29bb2
diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h
index dfb8523c8b..2ef211df59 100644
--- a/tests/qtest/bios-tables-test-allowed-diff.h
+++ b/tests/qtest/bios-tables-test-allowed-diff.h
@@ -1 +1,5 @@
/* List of comma-separated changed AML files to ignore */
+"tests/data/acpi/virt/IORT",
+"tests/data/acpi/virt/IORT.memhp",
+"tests/data/acpi/virt/IORT.numamem",
+"tests/data/acpi/virt/IORT.pxb",
--
2.27.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v6 09/10] hw/arm/virt: add ITS support in virt GIC
2021-07-07 2:18 [PATCH v6 00/10] GICv3 LPI and ITS feature implementation Shashi Mallela
` (7 preceding siblings ...)
2021-07-07 2:18 ` [PATCH v6 08/10] tests/data/acpi/virt: Add IORT files for ITS Shashi Mallela
@ 2021-07-07 2:18 ` Shashi Mallela
2021-07-07 2:18 ` [PATCH v6 10/10] tests/data/acpi/virt: Update IORT files for ITS Shashi Mallela
9 siblings, 0 replies; 14+ messages in thread
From: Shashi Mallela @ 2021-07-07 2:18 UTC (permalink / raw)
To: peter.maydell, leif, rad, mst, imammedo; +Cc: eric.auger, qemu-arm, qemu-devel
Included creation of ITS as part of virt platform GIC
initialization. This Emulated ITS model now co-exists with kvm
ITS and is enabled in absence of kvm irq kernel support in a
platform.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/virt.c | 28 ++++++++++++++++++++++++++--
include/hw/arm/virt.h | 2 ++
target/arm/kvm_arm.h | 4 ++--
3 files changed, 30 insertions(+), 4 deletions(-)
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 4b96f06014..1d8c44685c 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -583,6 +583,12 @@ static void create_its(VirtMachineState *vms)
const char *itsclass = its_class_name();
DeviceState *dev;
+ if (!strcmp(itsclass, "arm-gicv3-its")) {
+ if (!vms->tcg_its) {
+ itsclass = NULL;
+ }
+ }
+
if (!itsclass) {
/* Do nothing if not supported */
return;
@@ -620,7 +626,7 @@ static void create_v2m(VirtMachineState *vms)
vms->msi_controller = VIRT_MSI_CTRL_GICV2M;
}
-static void create_gic(VirtMachineState *vms)
+static void create_gic(VirtMachineState *vms, MemoryRegion *mem)
{
MachineState *ms = MACHINE(vms);
/* We create a standalone GIC */
@@ -654,6 +660,14 @@ static void create_gic(VirtMachineState *vms)
nb_redist_regions);
qdev_prop_set_uint32(vms->gic, "redist-region-count[0]", redist0_count);
+ if (!kvm_irqchip_in_kernel()) {
+ if (vms->tcg_its) {
+ object_property_set_link(OBJECT(vms->gic), "sysmem",
+ OBJECT(mem), &error_fatal);
+ qdev_prop_set_bit(vms->gic, "has-lpi", true);
+ }
+ }
+
if (nb_redist_regions == 2) {
uint32_t redist1_capacity =
vms->memmap[VIRT_HIGH_GIC_REDIST2].size / GICV3_REDIST_SIZE;
@@ -2039,7 +2053,7 @@ static void machvirt_init(MachineState *machine)
virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);
- create_gic(vms);
+ create_gic(vms, sysmem);
virt_cpu_post_init(vms, sysmem);
@@ -2720,6 +2734,12 @@ static void virt_instance_init(Object *obj)
} else {
/* Default allows ITS instantiation */
vms->its = true;
+
+ if (vmc->no_tcg_its) {
+ vms->tcg_its = false;
+ } else {
+ vms->tcg_its = true;
+ }
}
/* Default disallows iommu instantiation */
@@ -2766,8 +2786,12 @@ DEFINE_VIRT_MACHINE_AS_LATEST(6, 1)
static void virt_machine_6_0_options(MachineClass *mc)
{
+ VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc));
+
virt_machine_6_1_options(mc);
compat_props_add(mc->compat_props, hw_compat_6_0, hw_compat_6_0_len);
+ /* qemu ITS was introduced with 6.1 */
+ vmc->no_tcg_its = true;
}
DEFINE_VIRT_MACHINE(6, 0)
diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
index 921416f918..f873ab9068 100644
--- a/include/hw/arm/virt.h
+++ b/include/hw/arm/virt.h
@@ -120,6 +120,7 @@ struct VirtMachineClass {
MachineClass parent;
bool disallow_affinity_adjustment;
bool no_its;
+ bool no_tcg_its;
bool no_pmu;
bool claim_edge_triggered_timers;
bool smbios_old_sys_ver;
@@ -141,6 +142,7 @@ struct VirtMachineState {
bool highmem;
bool highmem_ecam;
bool its;
+ bool tcg_its;
bool virt;
bool ras;
bool mte;
diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h
index 34f8daa377..0613454975 100644
--- a/target/arm/kvm_arm.h
+++ b/target/arm/kvm_arm.h
@@ -525,8 +525,8 @@ static inline const char *its_class_name(void)
/* KVM implementation requires this capability */
return kvm_direct_msi_enabled() ? "arm-its-kvm" : NULL;
} else {
- /* Software emulation is not implemented yet */
- return NULL;
+ /* Software emulation based model */
+ return "arm-gicv3-its";
}
}
--
2.27.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v6 10/10] tests/data/acpi/virt: Update IORT files for ITS
2021-07-07 2:18 [PATCH v6 00/10] GICv3 LPI and ITS feature implementation Shashi Mallela
` (8 preceding siblings ...)
2021-07-07 2:18 ` [PATCH v6 09/10] hw/arm/virt: add ITS support in virt GIC Shashi Mallela
@ 2021-07-07 2:18 ` Shashi Mallela
9 siblings, 0 replies; 14+ messages in thread
From: Shashi Mallela @ 2021-07-07 2:18 UTC (permalink / raw)
To: peter.maydell, leif, rad, mst, imammedo; +Cc: eric.auger, qemu-arm, qemu-devel
Updated expected IORT files applicable with latest GICv3
ITS changes.
Full diff of new file disassembly:
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20180629 (64-bit version)
* Copyright (c) 2000 - 2018 Intel Corporation
*
* Disassembly of tests/data/acpi/virt/IORT.pxb, Tue Jun 29 17:35:38 2021
*
* ACPI Data Table [IORT]
*
* Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
*/
[000h 0000 4] Signature : "IORT" [IO Remapping Table]
[004h 0004 4] Table Length : 0000007C
[008h 0008 1] Revision : 00
[009h 0009 1] Checksum : 07
[00Ah 0010 6] Oem ID : "BOCHS "
[010h 0016 8] Oem Table ID : "BXPC "
[018h 0024 4] Oem Revision : 00000001
[01Ch 0028 4] Asl Compiler ID : "BXPC"
[020h 0032 4] Asl Compiler Revision : 00000001
[024h 0036 4] Node Count : 00000002
[028h 0040 4] Node Offset : 00000030
[02Ch 0044 4] Reserved : 00000000
[030h 0048 1] Type : 00
[031h 0049 2] Length : 0018
[033h 0051 1] Revision : 00
[034h 0052 4] Reserved : 00000000
[038h 0056 4] Mapping Count : 00000000
[03Ch 0060 4] Mapping Offset : 00000000
[040h 0064 4] ItsCount : 00000001
[044h 0068 4] Identifiers : 00000000
[048h 0072 1] Type : 02
[049h 0073 2] Length : 0034
[04Bh 0075 1] Revision : 00
[04Ch 0076 4] Reserved : 00000000
[050h 0080 4] Mapping Count : 00000001
[054h 0084 4] Mapping Offset : 00000020
[058h 0088 8] Memory Properties : [IORT Memory Access Properties]
[058h 0088 4] Cache Coherency : 00000001
[05Ch 0092 1] Hints (decoded below) : 00
Transient : 0
Write Allocate : 0
Read Allocate : 0
Override : 0
[05Dh 0093 2] Reserved : 0000
[05Fh 0095 1] Memory Flags (decoded below) : 03
Coherency : 1
Device Attribute : 1
[060h 0096 4] ATS Attribute : 00000000
[064h 0100 4] PCI Segment Number : 00000000
[068h 0104 1] Memory Size Limit : 00
[069h 0105 3] Reserved : 000000
[068h 0104 4] Input base : 00000000
[06Ch 0108 4] ID Count : 0000FFFF
[070h 0112 4] Output Base : 00000000
[074h 0116 4] Output Reference : 00000030
[078h 0120 4] Flags (decoded below) : 00000000
Single Mapping : 0
Raw Table Data: Length 124 (0x7C)
0000: 49 4F 52 54 7C 00 00 00 00 07 42 4F 43 48 53 20 // IORT|.....BOCHS
0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC
0020: 01 00 00 00 02 00 00 00 30 00 00 00 00 00 00 00 // ........0.......
0030: 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
0040: 01 00 00 00 00 00 00 00 02 34 00 00 00 00 00 00 // .........4......
0050: 01 00 00 00 20 00 00 00 01 00 00 00 00 00 00 03 // .... ...........
0060: 00 00 00 00 00 00 00 00 00 00 00 00 FF FF 00 00 // ................
0070: 00 00 00 00 30 00 00 00 00 00 00 00 // ....0.......
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
---
tests/data/acpi/virt/IORT | Bin 0 -> 124 bytes
tests/data/acpi/virt/IORT.memhp | Bin 0 -> 124 bytes
tests/data/acpi/virt/IORT.numamem | Bin 0 -> 124 bytes
tests/data/acpi/virt/IORT.pxb | Bin 0 -> 124 bytes
tests/qtest/bios-tables-test-allowed-diff.h | 4 ----
5 files changed, 4 deletions(-)
diff --git a/tests/data/acpi/virt/IORT b/tests/data/acpi/virt/IORT
index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..521acefe9ba66706c5607321a82d330586f3f280 100644
GIT binary patch
literal 124
zcmebD4+^Pa00MR=e`k+i1*eDrX9XZ&1PX!JAesq?4S*O7Bw!2(4Uz`|CKCt^;wu0#
QRGb+i3L*dhhtM#y0PN=p0RR91
literal 0
HcmV?d00001
diff --git a/tests/data/acpi/virt/IORT.memhp b/tests/data/acpi/virt/IORT.memhp
index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..521acefe9ba66706c5607321a82d330586f3f280 100644
GIT binary patch
literal 124
zcmebD4+^Pa00MR=e`k+i1*eDrX9XZ&1PX!JAesq?4S*O7Bw!2(4Uz`|CKCt^;wu0#
QRGb+i3L*dhhtM#y0PN=p0RR91
literal 0
HcmV?d00001
diff --git a/tests/data/acpi/virt/IORT.numamem b/tests/data/acpi/virt/IORT.numamem
index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..521acefe9ba66706c5607321a82d330586f3f280 100644
GIT binary patch
literal 124
zcmebD4+^Pa00MR=e`k+i1*eDrX9XZ&1PX!JAesq?4S*O7Bw!2(4Uz`|CKCt^;wu0#
QRGb+i3L*dhhtM#y0PN=p0RR91
literal 0
HcmV?d00001
diff --git a/tests/data/acpi/virt/IORT.pxb b/tests/data/acpi/virt/IORT.pxb
index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..521acefe9ba66706c5607321a82d330586f3f280 100644
GIT binary patch
literal 124
zcmebD4+^Pa00MR=e`k+i1*eDrX9XZ&1PX!JAesq?4S*O7Bw!2(4Uz`|CKCt^;wu0#
QRGb+i3L*dhhtM#y0PN=p0RR91
literal 0
HcmV?d00001
diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h
index 2ef211df59..dfb8523c8b 100644
--- a/tests/qtest/bios-tables-test-allowed-diff.h
+++ b/tests/qtest/bios-tables-test-allowed-diff.h
@@ -1,5 +1 @@
/* List of comma-separated changed AML files to ignore */
-"tests/data/acpi/virt/IORT",
-"tests/data/acpi/virt/IORT.memhp",
-"tests/data/acpi/virt/IORT.numamem",
-"tests/data/acpi/virt/IORT.pxb",
--
2.27.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v6 01/10] hw/intc: GICv3 ITS initial framework
2021-07-07 2:18 ` [PATCH v6 01/10] hw/intc: GICv3 ITS initial framework Shashi Mallela
@ 2021-07-08 17:24 ` Eric Auger
0 siblings, 0 replies; 14+ messages in thread
From: Eric Auger @ 2021-07-08 17:24 UTC (permalink / raw)
To: Shashi Mallela, peter.maydell, leif, rad, mst, imammedo
Cc: qemu-arm, qemu-devel
Hi Shashi,
On 7/7/21 4:18 AM, Shashi Mallela wrote:
> Added register definitions relevant to ITS,implemented overall
> ITS device framework with stubs for ITS control and translater
> regions read/write,extended ITS common to handle mmio init between
> existing kvm device and newer qemu device.
>
> Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
> ---
> hw/intc/arm_gicv3_its.c | 245 +++++++++++++++++++++++++
> hw/intc/arm_gicv3_its_common.c | 7 +-
> hw/intc/arm_gicv3_its_kvm.c | 2 +-
> hw/intc/gicv3_internal.h | 97 +++++++++-
> hw/intc/meson.build | 1 +
> include/hw/intc/arm_gicv3_its_common.h | 9 +-
> 6 files changed, 347 insertions(+), 14 deletions(-)
> create mode 100644 hw/intc/arm_gicv3_its.c
>
> diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c
> new file mode 100644
> index 0000000000..2286b3f757
> --- /dev/null
> +++ b/hw/intc/arm_gicv3_its.c
> @@ -0,0 +1,245 @@
> +/*
> + * ITS emulation for a GICv3-based system
> + *
> + * Copyright Linaro.org 2021
> + *
> + * Authors:
> + * Shashi Mallela <shashi.mallela@linaro.org>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or (at your
> + * option) any later version. See the COPYING file in the top-level directory.
> + *
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu/log.h"
> +#include "hw/qdev-properties.h"
> +#include "hw/intc/arm_gicv3_its_common.h"
> +#include "gicv3_internal.h"
> +#include "qom/object.h"
> +#include "qapi/error.h"
> +
> +typedef struct GICv3ITSClass GICv3ITSClass;
> +/* This is reusing the GICv3ITSState typedef from ARM_GICV3_ITS_COMMON */
> +DECLARE_OBJ_CHECKERS(GICv3ITSState, GICv3ITSClass,
> + ARM_GICV3_ITS, TYPE_ARM_GICV3_ITS)
> +
> +struct GICv3ITSClass {
> + GICv3ITSCommonClass parent_class;
> + void (*parent_reset)(DeviceState *dev);
> +};
> +
> +static MemTxResult gicv3_its_translation_write(void *opaque, hwaddr offset,
> + uint64_t data, unsigned size,
> + MemTxAttrs attrs)
> +{
> + MemTxResult result = MEMTX_OK;
> +
> + return result;
> +}
> +
> +static MemTxResult its_writel(GICv3ITSState *s, hwaddr offset,
> + uint64_t value, MemTxAttrs attrs)
> +{
> + MemTxResult result = MEMTX_OK;
> +
> + return result;
> +}
> +
> +static MemTxResult its_readl(GICv3ITSState *s, hwaddr offset,
> + uint64_t *data, MemTxAttrs attrs)
> +{
> + MemTxResult result = MEMTX_OK;
> +
> + return result;
> +}
> +
> +static MemTxResult its_writell(GICv3ITSState *s, hwaddr offset,
> + uint64_t value, MemTxAttrs attrs)
> +{
> + MemTxResult result = MEMTX_OK;
> +
> + return result;
> +}
> +
> +static MemTxResult its_readll(GICv3ITSState *s, hwaddr offset,
> + uint64_t *data, MemTxAttrs attrs)
> +{
> + MemTxResult result = MEMTX_OK;
> +
> + return result;
> +}
> +
> +static MemTxResult gicv3_its_read(void *opaque, hwaddr offset, uint64_t *data,
> + unsigned size, MemTxAttrs attrs)
> +{
> + GICv3ITSState *s = (GICv3ITSState *)opaque;
> + MemTxResult result;
> +
> + switch (size) {
> + case 4:
> + result = its_readl(s, offset, data, attrs);
> + break;
> + case 8:
> + result = its_readll(s, offset, data, attrs);
> + break;
> + default:
> + result = MEMTX_ERROR;
> + break;
> + }
> +
> + if (result == MEMTX_ERROR) {
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "%s: invalid guest read at offset " TARGET_FMT_plx
> + "size %u\n", __func__, offset, size);
> + /*
> + * The spec requires that reserved registers are RAZ/WI;
> + * so use MEMTX_ERROR returns from leaf functions as a way to
> + * trigger the guest-error logging but don't return it to
> + * the caller, or we'll cause a spurious guest data abort.
> + */
> + result = MEMTX_OK;
> + *data = 0;
> + }
> + return result;
> +}
> +
> +static MemTxResult gicv3_its_write(void *opaque, hwaddr offset, uint64_t data,
> + unsigned size, MemTxAttrs attrs)
> +{
> + GICv3ITSState *s = (GICv3ITSState *)opaque;
> + MemTxResult result;
> +
> + switch (size) {
> + case 4:
> + result = its_writel(s, offset, data, attrs);
> + break;
> + case 8:
> + result = its_writell(s, offset, data, attrs);
> + break;
> + default:
> + result = MEMTX_ERROR;
> + break;
> + }
> +
> + if (result == MEMTX_ERROR) {
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "%s: invalid guest write at offset " TARGET_FMT_plx
> + "size %u\n", __func__, offset, size);
> + /*
> + * The spec requires that reserved registers are RAZ/WI;
> + * so use MEMTX_ERROR returns from leaf functions as a way to
> + * trigger the guest-error logging but don't return it to
> + * the caller, or we'll cause a spurious guest data abort.
> + */
> + result = MEMTX_OK;
> + }
> + return result;
> +}
> +
> +static const MemoryRegionOps gicv3_its_control_ops = {
> + .read_with_attrs = gicv3_its_read,
> + .write_with_attrs = gicv3_its_write,
> + .valid.min_access_size = 4,
> + .valid.max_access_size = 8,
> + .impl.min_access_size = 4,
> + .impl.max_access_size = 8,
> + .endianness = DEVICE_NATIVE_ENDIAN,
> +};
> +
> +static const MemoryRegionOps gicv3_its_translation_ops = {
> + .write_with_attrs = gicv3_its_translation_write,
> + .valid.min_access_size = 2,
> + .valid.max_access_size = 4,
> + .impl.min_access_size = 2,
> + .impl.max_access_size = 4,
> + .endianness = DEVICE_NATIVE_ENDIAN,
> +};
> +
> +static void gicv3_arm_its_realize(DeviceState *dev, Error **errp)
> +{
> + GICv3ITSState *s = ARM_GICV3_ITS_COMMON(dev);
> + int i;
> +
> + for (i = 0; i < s->gicv3->num_cpu; i++) {
> + if (!(s->gicv3->cpu[i].gicr_typer & GICR_TYPER_PLPIS)) {
> + error_setg(errp, "Physical LPI not supported by CPU %d", i);
> + return;
> + }
> + }
> +
> + gicv3_its_init_mmio(s, &gicv3_its_control_ops, &gicv3_its_translation_ops);
> +
> + /* set the ITS default features supported */
> + s->typer = FIELD_DP64(s->typer, GITS_TYPER, PHYSICAL,
> + GITS_TYPE_PHYSICAL);
> + s->typer = FIELD_DP64(s->typer, GITS_TYPER, ITT_ENTRY_SIZE,
> + ITS_ITT_ENTRY_SIZE - 1);
> + s->typer = FIELD_DP64(s->typer, GITS_TYPER, IDBITS, ITS_IDBITS);
> + s->typer = FIELD_DP64(s->typer, GITS_TYPER, DEVBITS, ITS_DEVBITS);
> + s->typer = FIELD_DP64(s->typer, GITS_TYPER, CIL, 1);
> + s->typer = FIELD_DP64(s->typer, GITS_TYPER, CIDBITS, ITS_CIDBITS);
> +}
> +
> +static void gicv3_its_reset(DeviceState *dev)
> +{
> + GICv3ITSState *s = ARM_GICV3_ITS_COMMON(dev);
> + GICv3ITSClass *c = ARM_GICV3_ITS_GET_CLASS(s);
> +
> + c->parent_reset(dev);
> +
> + /* Quiescent bit reset to 1 */
> + s->ctlr = FIELD_DP32(s->ctlr, GITS_CTLR, QUIESCENT, 1);
> +
> + /*
> + * setting GITS_BASER0.Type = 0b001 (Device)
> + * GITS_BASER1.Type = 0b100 (Collection Table)
> + * GITS_BASER<n>.Type,where n = 3 to 7 are 0b00 (Unimplemented)
> + * GITS_BASER<0,1>.Page_Size = 64KB
> + * and default translation table entry size to 16 bytes
> + */
> + s->baser[0] = FIELD_DP64(s->baser[0], GITS_BASER, TYPE,
> + GITS_BASER_TYPE_DEVICE);
> + s->baser[0] = FIELD_DP64(s->baser[0], GITS_BASER, PAGESIZE,
> + GITS_BASER_PAGESIZE_64K);
> + s->baser[0] = FIELD_DP64(s->baser[0], GITS_BASER, ENTRYSIZE,
> + GITS_DTE_SIZE - 1);
> +
> + s->baser[1] = FIELD_DP64(s->baser[1], GITS_BASER, TYPE,
> + GITS_BASER_TYPE_COLLECTION);
> + s->baser[1] = FIELD_DP64(s->baser[1], GITS_BASER, PAGESIZE,
> + GITS_BASER_PAGESIZE_64K);
> + s->baser[1] = FIELD_DP64(s->baser[1], GITS_BASER, ENTRYSIZE,
> + GITS_CTE_SIZE - 1);
> +}
> +
> +static Property gicv3_its_props[] = {
> + DEFINE_PROP_LINK("parent-gicv3", GICv3ITSState, gicv3, "arm-gicv3",
> + GICv3State *),
> + DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void gicv3_its_class_init(ObjectClass *klass, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(klass);
> + GICv3ITSClass *ic = ARM_GICV3_ITS_CLASS(klass);
> +
> + dc->realize = gicv3_arm_its_realize;
> + device_class_set_props(dc, gicv3_its_props);
> + device_class_set_parent_reset(dc, gicv3_its_reset, &ic->parent_reset);
> +}
> +
> +static const TypeInfo gicv3_its_info = {
> + .name = TYPE_ARM_GICV3_ITS,
> + .parent = TYPE_ARM_GICV3_ITS_COMMON,
> + .instance_size = sizeof(GICv3ITSState),
> + .class_init = gicv3_its_class_init,
> + .class_size = sizeof(GICv3ITSClass),
> +};
> +
> +static void gicv3_its_register_types(void)
> +{
> + type_register_static(&gicv3_its_info);
> +}
> +
> +type_init(gicv3_its_register_types)
> diff --git a/hw/intc/arm_gicv3_its_common.c b/hw/intc/arm_gicv3_its_common.c
> index 66c4c6a188..7d7f3882e7 100644
> --- a/hw/intc/arm_gicv3_its_common.c
> +++ b/hw/intc/arm_gicv3_its_common.c
> @@ -50,6 +50,8 @@ static int gicv3_its_post_load(void *opaque, int version_id)
>
> static const VMStateDescription vmstate_its = {
> .name = "arm_gicv3_its",
> + .version_id = 1,
> + .minimum_version_id = 1,
> .pre_save = gicv3_its_pre_save,
> .post_load = gicv3_its_post_load,
> .priority = MIG_PRI_GICV3_ITS,
> @@ -99,14 +101,15 @@ static const MemoryRegionOps gicv3_its_trans_ops = {
> .endianness = DEVICE_NATIVE_ENDIAN,
> };
>
> -void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops)
> +void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops,
> + const MemoryRegionOps *tops)
> {
> SysBusDevice *sbd = SYS_BUS_DEVICE(s);
>
> memory_region_init_io(&s->iomem_its_cntrl, OBJECT(s), ops, s,
> "control", ITS_CONTROL_SIZE);
> memory_region_init_io(&s->iomem_its_translation, OBJECT(s),
> - &gicv3_its_trans_ops, s,
> + tops ? tops : &gicv3_its_trans_ops, s,
> "translation", ITS_TRANS_SIZE);
>
> /* Our two regions are always adjacent, therefore we now combine them
> diff --git a/hw/intc/arm_gicv3_its_kvm.c b/hw/intc/arm_gicv3_its_kvm.c
> index b554d2ede0..0b4cbed28b 100644
> --- a/hw/intc/arm_gicv3_its_kvm.c
> +++ b/hw/intc/arm_gicv3_its_kvm.c
> @@ -106,7 +106,7 @@ static void kvm_arm_its_realize(DeviceState *dev, Error **errp)
> kvm_arm_register_device(&s->iomem_its_cntrl, -1, KVM_DEV_ARM_VGIC_GRP_ADDR,
> KVM_VGIC_ITS_ADDR_TYPE, s->dev_fd, 0);
>
> - gicv3_its_init_mmio(s, NULL);
> + gicv3_its_init_mmio(s, NULL, NULL);
>
> if (!kvm_device_check_attr(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_ITS_REGS,
> GITS_CTLR)) {
> diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
> index 05303a55c8..6c0ff0061c 100644
> --- a/hw/intc/gicv3_internal.h
> +++ b/hw/intc/gicv3_internal.h
> @@ -24,6 +24,7 @@
> #ifndef QEMU_ARM_GICV3_INTERNAL_H
> #define QEMU_ARM_GICV3_INTERNAL_H
>
> +#include "hw/registerfields.h"
> #include "hw/intc/arm_gicv3_common.h"
>
> /* Distributor registers, as offsets from the distributor base address */
> @@ -67,6 +68,9 @@
> #define GICD_CTLR_E1NWF (1U << 7)
> #define GICD_CTLR_RWP (1U << 31)
>
> +/* 16 bits EventId */
> +#define GICD_TYPER_IDBITS 0xf
> +
> /*
> * Redistributor frame offsets from RD_base
> */
> @@ -122,17 +126,17 @@
> #define GICR_WAKER_ProcessorSleep (1U << 1)
> #define GICR_WAKER_ChildrenAsleep (1U << 2)
>
> -#define GICR_PROPBASER_OUTER_CACHEABILITY_MASK (7ULL << 56)
> -#define GICR_PROPBASER_ADDR_MASK (0xfffffffffULL << 12)
> -#define GICR_PROPBASER_SHAREABILITY_MASK (3U << 10)
> -#define GICR_PROPBASER_CACHEABILITY_MASK (7U << 7)
> -#define GICR_PROPBASER_IDBITS_MASK (0x1f)
> +FIELD(GICR_PROPBASER, IDBITS, 0, 5)
> +FIELD(GICR_PROPBASER, INNERCACHE, 7, 3)
> +FIELD(GICR_PROPBASER, SHAREABILITY, 10, 2)
> +FIELD(GICR_PROPBASER, PHYADDR, 12, 40)
> +FIELD(GICR_PROPBASER, OUTERCACHE, 56, 3)
>
> -#define GICR_PENDBASER_PTZ (1ULL << 62)
> -#define GICR_PENDBASER_OUTER_CACHEABILITY_MASK (7ULL << 56)
> -#define GICR_PENDBASER_ADDR_MASK (0xffffffffULL << 16)
> -#define GICR_PENDBASER_SHAREABILITY_MASK (3U << 10)
> -#define GICR_PENDBASER_CACHEABILITY_MASK (7U << 7)
> +FIELD(GICR_PENDBASER, INNERCACHE, 7, 3)
> +FIELD(GICR_PENDBASER, SHAREABILITY, 10, 2)
> +FIELD(GICR_PENDBASER, PHYADDR, 16, 36)
> +FIELD(GICR_PENDBASER, OUTERCACHE, 56, 3)
> +FIELD(GICR_PENDBASER, PTZ, 62, 1)
>
> #define ICC_CTLR_EL1_CBPR (1U << 0)
> #define ICC_CTLR_EL1_EOIMODE (1U << 1)
> @@ -239,6 +243,79 @@
> #define ICH_VTR_EL2_PREBITS_SHIFT 26
> #define ICH_VTR_EL2_PRIBITS_SHIFT 29
>
> +/* ITS Registers */
> +
> +FIELD(GITS_BASER, SIZE, 0, 8)
> +FIELD(GITS_BASER, PAGESIZE, 8, 2)
> +FIELD(GITS_BASER, SHAREABILITY, 10, 2)
> +FIELD(GITS_BASER, PHYADDR, 12, 36)
> +FIELD(GITS_BASER, PHYADDRL_64K, 16, 32)
> +FIELD(GITS_BASER, PHYADDRH_64K, 12, 4)
> +FIELD(GITS_BASER, ENTRYSIZE, 48, 5)
> +FIELD(GITS_BASER, OUTERCACHE, 53, 3)
> +FIELD(GITS_BASER, TYPE, 56, 3)
> +FIELD(GITS_BASER, INNERCACHE, 59, 3)
> +FIELD(GITS_BASER, INDIRECT, 62, 1)
> +FIELD(GITS_BASER, VALID, 63, 1)
> +
> +FIELD(GITS_CTLR, QUIESCENT, 31, 1)
> +
> +FIELD(GITS_TYPER, PHYSICAL, 0, 1)
> +FIELD(GITS_TYPER, ITT_ENTRY_SIZE, 4, 4)
> +FIELD(GITS_TYPER, IDBITS, 8, 5)
> +FIELD(GITS_TYPER, DEVBITS, 13, 5)
> +FIELD(GITS_TYPER, SEIS, 18, 1)
> +FIELD(GITS_TYPER, PTA, 19, 1)
> +FIELD(GITS_TYPER, CIDBITS, 32, 4)
> +FIELD(GITS_TYPER, CIL, 36, 1)
> +
> +#define GITS_BASER_PAGESIZE_4K 0
> +#define GITS_BASER_PAGESIZE_16K 1
> +#define GITS_BASER_PAGESIZE_64K 2
> +
> +#define GITS_BASER_TYPE_DEVICE 1ULL
> +#define GITS_BASER_TYPE_COLLECTION 4ULL
> +
> +/**
> + * Default features advertised by this version of ITS
> + */
> +/* Physical LPIs supported */
> +#define GITS_TYPE_PHYSICAL (1U << 0)
> +
> +/*
> + * 12 bytes Interrupt translation Table Entry size
> + * ITE Lower 8 Bytes
> + * Valid = 1 bit,InterruptType = 1 bit,
> + * Size of LPI number space[considering max 24 bits]
> + * (GICv3 = 1023, GICv4 = pINTID doorbell value),
As you chose the format given by the Table 5.3, I think
you should mention it in the comment. Also you are mixing the size of
the fields and the name of the fields.
So it is hardly readable overall (at least for me). If you need to
respin, please consider using
a rather common field desc like
bits: | 63| 62 ... 49 | 48 ... 5 | 4 ... 0 |
values: | V | next | ITT_addr | Size |
(just an example)
Besides
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Eric
> + * Size of LPI number space[considering max 24 bits],
> + * ITE Higher 4 Bytes
> + * ICID = 16 bits,
> + * vPEID = 16 bits
> + */
> +#define ITS_ITT_ENTRY_SIZE 0xC
> +
> +/* 16 bits EventId */
> +#define ITS_IDBITS GICD_TYPER_IDBITS
> +
> +/* 16 bits DeviceId */
> +#define ITS_DEVBITS 0xF
> +
> +/* 16 bits CollectionId */
> +#define ITS_CIDBITS 0xF
> +
> +/*
> + * 8 bytes Device Table Entry size
> + * Valid = 1 bit,ITTAddr = 44 bits,Size = 5 bits
> + */
> +#define GITS_DTE_SIZE (0x8ULL)
> +
> +/*
> + * 8 bytes Collection Table Entry size
> + * Valid = 1 bit,RDBase = 36 bits(considering max RDBASE)
> + */
> +#define GITS_CTE_SIZE (0x8ULL)
> +
> /* Special interrupt IDs */
> #define INTID_SECURE 1020
> #define INTID_NONSECURE 1021
> diff --git a/hw/intc/meson.build b/hw/intc/meson.build
> index 6e52a166e3..4dcfea6aa8 100644
> --- a/hw/intc/meson.build
> +++ b/hw/intc/meson.build
> @@ -8,6 +8,7 @@ softmmu_ss.add(when: 'CONFIG_ARM_GIC', if_true: files(
> 'arm_gicv3_dist.c',
> 'arm_gicv3_its_common.c',
> 'arm_gicv3_redist.c',
> + 'arm_gicv3_its.c',
> ))
> softmmu_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_pic.c'))
> softmmu_ss.add(when: 'CONFIG_HEATHROW_PIC', if_true: files('heathrow_pic.c'))
> diff --git a/include/hw/intc/arm_gicv3_its_common.h b/include/hw/intc/arm_gicv3_its_common.h
> index 5a0952b404..65d1191db1 100644
> --- a/include/hw/intc/arm_gicv3_its_common.h
> +++ b/include/hw/intc/arm_gicv3_its_common.h
> @@ -25,17 +25,22 @@
> #include "hw/intc/arm_gicv3_common.h"
> #include "qom/object.h"
>
> +#define TYPE_ARM_GICV3_ITS "arm-gicv3-its"
> +
> #define ITS_CONTROL_SIZE 0x10000
> #define ITS_TRANS_SIZE 0x10000
> #define ITS_SIZE (ITS_CONTROL_SIZE + ITS_TRANS_SIZE)
>
> #define GITS_CTLR 0x0
> #define GITS_IIDR 0x4
> +#define GITS_TYPER 0x8
> #define GITS_CBASER 0x80
> #define GITS_CWRITER 0x88
> #define GITS_CREADR 0x90
> #define GITS_BASER 0x100
>
> +#define GITS_TRANSLATER 0x0040
> +
> struct GICv3ITSState {
> SysBusDevice parent_obj;
>
> @@ -52,6 +57,7 @@ struct GICv3ITSState {
> /* Registers */
> uint32_t ctlr;
> uint32_t iidr;
> + uint64_t typer;
> uint64_t cbaser;
> uint64_t cwriter;
> uint64_t creadr;
> @@ -62,7 +68,8 @@ struct GICv3ITSState {
>
> typedef struct GICv3ITSState GICv3ITSState;
>
> -void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops);
> +void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops,
> + const MemoryRegionOps *tops);
>
> #define TYPE_ARM_GICV3_ITS_COMMON "arm-gicv3-its-common"
> typedef struct GICv3ITSCommonClass GICv3ITSCommonClass;
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v6 04/10] hw/intc: GICv3 ITS Command processing
2021-07-07 2:18 ` [PATCH v6 04/10] hw/intc: GICv3 ITS Command processing Shashi Mallela
@ 2021-07-13 16:11 ` Peter Maydell
0 siblings, 0 replies; 14+ messages in thread
From: Peter Maydell @ 2021-07-13 16:11 UTC (permalink / raw)
To: Shashi Mallela
Cc: Michael S. Tsirkin, Radoslaw Biernacki, QEMU Developers,
Eric Auger, qemu-arm, Igor Mammedov, Leif Lindholm
On Wed, 7 Jul 2021 at 03:18, Shashi Mallela <shashi.mallela@linaro.org> wrote:
>
> Added ITS command queue handling for MAPTI,MAPI commands,handled ITS
> translation which triggers an LPI via INT command as well as write
> to GITS_TRANSLATER register,defined enum to differentiate between ITS
> command interrupt trigger and GITS_TRANSLATER based interrupt trigger.
> Each of these commands make use of other functionalities implemented to
> get device table entry,collection table entry or interrupt translation
> table entry required for their processing.
>
> Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Couple of minor things below; otherwise
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
> +static bool get_ite(GICv3ITSState *s, uint32_t eventid, uint64_t dte,
> + uint16_t *icid, uint32_t *pIntid, MemTxResult *res)
> +{
> + AddressSpace *as = &s->gicv3->dma_as;
> + uint64_t itt_addr;
> + bool status = false;
> + IteEntry ite;
> +
> + itt_addr = (dte & GITS_DTE_ITTADDR_MASK) >> GITS_DTE_ITTADDR_SHIFT;
> + itt_addr <<= ITTADDR_SHIFT; /* 256 byte aligned */
> +
> + memset(&ite, 0 , sizeof(ite));
"IteEntry ite = {};" will zero-initialize it without the need for a memset.
> + ite.itel = address_space_ldq_le(as, itt_addr +
> + (eventid * sizeof(uint64_t)),
> + MEMTXATTRS_UNSPECIFIED, res);
> +
> + if (*res == MEMTX_OK) {
> + ite.iteh = address_space_ldl_le(as, itt_addr + ((eventid +
> + sizeof(uint64_t)) * sizeof(uint32_t)),
> + MEMTXATTRS_UNSPECIFIED, res);
> +
> + if (*res == MEMTX_OK) {
> + if (ite.itel & TABLE_ENTRY_VALID_MASK) {
> + if ((ite.itel >> ITE_ENTRY_INTTYPE_SHIFT) &
> + GITS_TYPE_PHYSICAL) {
> + *pIntid = (ite.itel & ITE_ENTRY_INTID_MASK) >>
> + ITE_ENTRY_INTID_SHIFT;
> + *icid = ite.iteh & ITE_ENTRY_ICID_MASK;
> + status = true;
> + }
> + }
> + }
> + }
> + return status;
> +}
> +/*
> + * This function handles the processing of following commands based on
> + * the ItsCmdType parameter passed:-
> + * 1. triggering of lpi interrupt translation via ITS INT command
> + * 2. triggering of lpi interrupt translation via gits_translater register
> + * 3. handling of ITS CLEAR command
> + * 4. handling of ITS DISCARD command
> + */
> +static MemTxResult process_its_cmd(GICv3ITSState *s, uint64_t value,
> + uint32_t offset, ItsCmdType cmd)
> +{
> + AddressSpace *as = &s->gicv3->dma_as;
> + uint32_t devid, eventid;
> + MemTxResult res = MEMTX_OK;
> + bool dte_valid;
> + uint64_t dte = 0;
> + uint32_t max_eventid;
> + uint16_t icid = 0;
> + uint32_t pIntid = 0;
> + bool ite_valid = false;
> + uint64_t cte = 0;
> + bool cte_valid = false;
> + IteEntry ite;
> +
> + if (cmd == NONE) {
> + devid = offset;
> + } else {
> + devid = ((value & DEVID_MASK) >> DEVID_SHIFT);
> +
> + offset += NUM_BYTES_IN_DW;
> + value = address_space_ldq_le(as, s->cq.base_addr + offset,
> + MEMTXATTRS_UNSPECIFIED, &res);
> + }
> +
> + if (res != MEMTX_OK) {
> + return res;
> + }
> +
> + eventid = (value & EVENTID_MASK);
> +
> + dte = get_dte(s, devid, &res);
> +
> + if (res != MEMTX_OK) {
> + return res;
> + }
> + dte_valid = dte & TABLE_ENTRY_VALID_MASK;
> +
> + if (dte_valid) {
> + max_eventid = (1UL << (((dte >> 1U) & SIZE_MASK) + 1));
> +
> + ite_valid = get_ite(s, eventid, dte, &icid, &pIntid, &res);
> +
> + if (res != MEMTX_OK) {
> + return res;
> + }
> +
> + if (ite_valid) {
> + cte_valid = get_cte(s, icid, &cte, &res);
> + }
> +
> + if (res != MEMTX_OK) {
> + return res;
> + }
> + }
> +
> + if ((devid > s->dt.maxids.max_devids) || !dte_valid || !ite_valid ||
> + !cte_valid || (eventid > max_eventid)) {
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "%s: invalid command attributes "
> + "devid %d or eventid %d or invalid dte %d or"
> + "invalid cte %d or invalid ite %d\n",
> + __func__, devid, eventid, dte_valid, cte_valid,
> + ite_valid);
> + /*
> + * in this implementation, in case of error
> + * we ignore this command and move onto the next
> + * command in the queue
> + */
> + } else {
> + /*
> + * Current implementation only supports rdbase == procnum
> + * Hence rdbase physical address is ignored
> + */
> + if (cmd == DISCARD) {
> + memset(&ite, 0 , sizeof(ite));
Again here you could make 'ite' local to this code block and write
it "IteEntry ite = {};" instead of the memset.
> + /* remove mapping from interrupt translation table */
> + res = update_ite(s, eventid, dte, ite);
> + }
> + }
> +
> + return res;
> +}
> +
> +static MemTxResult process_mapti(GICv3ITSState *s, uint64_t value,
> + uint32_t offset, bool ignore_pInt)
> +{
> + AddressSpace *as = &s->gicv3->dma_as;
> + uint32_t devid, eventid;
> + uint32_t pIntid = 0;
> + uint32_t max_eventid, max_Intid;
> + bool dte_valid;
> + MemTxResult res = MEMTX_OK;
> + uint16_t icid = 0;
> + uint64_t dte = 0;
> + IteEntry ite;
> + uint32_t int_spurious = INTID_SPURIOUS;
> +
> + devid = ((value & DEVID_MASK) >> DEVID_SHIFT);
> + offset += NUM_BYTES_IN_DW;
> + value = address_space_ldq_le(as, s->cq.base_addr + offset,
> + MEMTXATTRS_UNSPECIFIED, &res);
> +
> + if (res != MEMTX_OK) {
> + return res;
> + }
> +
> + eventid = (value & EVENTID_MASK);
> +
> + if (!ignore_pInt) {
> + pIntid = ((value & pINTID_MASK) >> pINTID_SHIFT);
> + }
> +
> + offset += NUM_BYTES_IN_DW;
> + value = address_space_ldq_le(as, s->cq.base_addr + offset,
> + MEMTXATTRS_UNSPECIFIED, &res);
> +
> + if (res != MEMTX_OK) {
> + return res;
> + }
> +
> + icid = value & ICID_MASK;
> +
> + dte = get_dte(s, devid, &res);
> +
> + if (res != MEMTX_OK) {
> + return res;
> + }
> + dte_valid = dte & TABLE_ENTRY_VALID_MASK;
> +
> + max_eventid = (1UL << (((dte >> 1U) & SIZE_MASK) + 1));
> +
> + if (!ignore_pInt) {
> + max_Intid = (1ULL << (GICD_TYPER_IDBITS + 1));
This is off by one -- the maximum int ID is
(1ULL << (GICD_TYPER_IDBITS + 1)) - 1
(if you have N bits then the largest ID value is 0b111..111,
not 0b100...000).
> + }
> +
> + if ((devid > s->dt.maxids.max_devids) || (icid > s->ct.maxids.max_collids)
> + || !dte_valid || (eventid > max_eventid) ||
> + (!ignore_pInt && ((pIntid < GICV3_LPI_INTID_START) ||
> + (pIntid > max_Intid)))) {
1023 is also a permitted value here (meaning "no interrupt").
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "%s: invalid command attributes "
> + "devid %d or icid %d or eventid %d or pIntid %d or"
> + "unmapped dte %d\n", __func__, devid, icid, eventid,
> + pIntid, dte_valid);
> + /*
> + * in this implementation, in case of error
> + * we ignore this command and move onto the next
> + * command in the queue
> + */
> + } else {
> + memset(&ite, 0 , sizeof(ite));
> + /* add ite entry to interrupt translation table */
> + ite.itel = (dte_valid & TABLE_ENTRY_VALID_MASK) |
> + (GITS_TYPE_PHYSICAL << ITE_ENTRY_INTTYPE_SHIFT);
> +
> + if (ignore_pInt) {
> + ite.itel |= (eventid << ITE_ENTRY_INTID_SHIFT);
> + } else {
> + ite.itel |= (pIntid << ITE_ENTRY_INTID_SHIFT);
> + }
> + ite.itel |= (int_spurious << ITE_ENTRY_INTSP_SHIFT);
> + ite.iteh |= icid;
If you use "=" here instead of "|=" to set ite.iteh then you've
explicitly set all the members of "ite" and you don't need the
memset at all.
> +
> + res = update_ite(s, eventid, dte, ite);
> + }
> +
> + return res;
> +}
> +
> static MemTxResult update_cte(GICv3ITSState *s, uint16_t icid, bool valid,
> uint64_t rdbase)
> {
> @@ -128,7 +461,8 @@ static MemTxResult process_mapc(GICv3ITSState *s, uint32_t offset)
>
> icid = value & ICID_MASK;
>
> - rdbase = (value >> R_MAPC_RDBASE_SHIFT) & RDBASE_PROCNUM_MASK;
> + rdbase = (value & R_MAPC_RDBASE_MASK) >> R_MAPC_RDBASE_SHIFT;
> + rdbase &= RDBASE_PROCNUM_MASK;
This looks like something that should have been squashed into a
previous patch.
thanks
-- PMM
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v6 06/10] hw/intc: GICv3 redistributor ITS processing
2021-07-07 2:18 ` [PATCH v6 06/10] hw/intc: GICv3 redistributor ITS processing Shashi Mallela
@ 2021-07-13 16:45 ` Peter Maydell
0 siblings, 0 replies; 14+ messages in thread
From: Peter Maydell @ 2021-07-13 16:45 UTC (permalink / raw)
To: Shashi Mallela
Cc: Michael S. Tsirkin, Radoslaw Biernacki, QEMU Developers,
Eric Auger, qemu-arm, Igor Mammedov, Leif Lindholm
On Wed, 7 Jul 2021 at 03:18, Shashi Mallela <shashi.mallela@linaro.org> wrote:
>
> Implemented lpi processing at redistributor to get lpi config info
> from lpi configuration table,determine priority,set pending state in
> lpi pending table and forward the lpi to cpuif.Added logic to invoke
> redistributor lpi processing with translated LPI which set/clear LPI
> from ITS device as part of ITS INT,CLEAR,DISCARD command and
> GITS_TRANSLATER processing.
>
> Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
> +
> +void gicv3_redist_update_lpi(GICv3CPUState *cs)
> +{
> + /*
> + * This function scans the LPI pending table and for each pending
> + * LPI, reads the corresponding entry from LPI configuration table
> + * to extract the priority info and determine if the current LPI
> + * priority is lower than the last computed high priority lpi interrupt.
> + * If yes, replace current LPI as the new high priority lpi interrupt.
> + */
> + AddressSpace *as = &cs->gic->dma_as;
> + uint64_t lpipt_baddr;
> + uint32_t pendt_size = 0;
> + uint8_t pend;
> + int i;
> + uint64_t idbits;
> +
> + idbits = MIN(FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER, IDBITS),
> + GICD_TYPER_IDBITS);
> +
> + if (!(cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) || !cs->gicr_propbaser ||
> + !cs->gicr_pendbaser || (idbits < GICR_PROPBASER_IDBITS_THRESHOLD)) {
If you structure the loop below appropriately, you can avoid having to
explicitly check idbits against GICR_PROPBASER_IDBITS_THRESHOLD; see below.
> + return;
> + }
> +
> + cs->hpplpi.prio = 0xff;
> +
> + lpipt_baddr = cs->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK;
> +
> + /* Determine the highest priority pending interrupt among LPIs */
> + pendt_size = (1ULL << (idbits + 1));
> +
> + for (i = 0; i < pendt_size / 8; i++) {
> + address_space_read(as, lpipt_baddr +
> + (((GICV3_LPI_INTID_START + i) / 8) * sizeof(pend)),
> + MEMTXATTRS_UNSPECIFIED, &pend, sizeof(pend));
> +
> + if (!((1 << ((GICV3_LPI_INTID_START + i) % 8)) & pend)) {
> + continue;
> + }
I don't think this code is right. The pending table size includes one
bit for every interrupt ID, including the low ones below GICV3_LPID_INTID_START
(ie there's a spare 1K for IMPDEF purposes at the start). Here the
loop is iterating through the whole pending table with 'i' a byte
offset into it -- but then when we calculate the address to read we
add GICV3_LPI_INTID_START to it. The loop body seems to be written
as if 'i' is an intid, but the for() is not doing that.
Also, you read a byte of pending information, which tells you about
the pending state of 8 interrupts, but you only call
gicv3_redist_check_lpi_priority() for one of them.
> +
> + gicv3_redist_check_lpi_priority(cs, GICV3_LPI_INTID_START + i);
> + }
I think you probably want to structure the loop something like this:
for (offset = GICV3_LPI_INTID_START / 8; offset < pendt_size / 8; offset++) {
read the byte at lpipt_baddr + offset;
while (byte) {
bit = ctz32(byte);
gicv3_redist_check_lpi_priority(cs, offset * 8 + bit);
byte &= ~(1 << bit);
}
}
(this is why you don't need to explicitly check GICR_PROPBASER_IDBITS_THRESHOLD:
if idbits is too low then the loop condition is just always false and we
don't check any pending bits.)
> +}
> +
> +void gicv3_redist_lpi_pending(GICv3CPUState *cs, int irq, int level)
> +{
> + /*
> + * This function updates the pending bit in lpi pending table for
> + * the irq being activated or deactivated.
> + */
> + AddressSpace *as = &cs->gic->dma_as;
> + uint64_t lpipt_baddr;
> + bool ispend = false;
> + uint8_t pend;
> +
> + /*
> + * get the bit value corresponding to this irq in the
> + * lpi pending table
> + */
> + lpipt_baddr = cs->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK;
> +
> + address_space_read(as, lpipt_baddr + ((irq / 8) * sizeof(pend)),
> + MEMTXATTRS_UNSPECIFIED, &pend, sizeof(pend));
> +
> + ispend = extract32(pend, irq % 8, 1);
> +
> + /* no change in the value of pending bit, return */
> + if (ispend == level) {
> + return;
> + }
> + pend = deposit32(pend, irq % 8, 1, level ? 1 : 0);
> +
> + address_space_write(as, lpipt_baddr + ((irq / 8) * sizeof(pend)),
> + MEMTXATTRS_UNSPECIFIED, &pend, sizeof(pend));
> +
> + /*
> + * check if this LPI is better than the current hpplpi, if yes
> + * just set hpplpi.prio and .irq without doing a full rescan
> + */
> + if (level) {
> + gicv3_redist_check_lpi_priority(cs, irq);
> + } else {
> + if (irq == cs->hpplpi.irq) {
> + gicv3_redist_update_lpi(cs);
> + }
> + }
> +}
> +
> +void gicv3_redist_process_lpi(GICv3CPUState *cs, int irq, int level)
> +{
> + uint64_t idbits;
> +
> + idbits = MIN(FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER, IDBITS),
> + GICD_TYPER_IDBITS);
You should ignore irq values less than GICV3_LPI_INTID_START here.
(We checked when we put the map into the ITE but this is an easy
way to get rid of the 1023 special case.)
> +
> + if (!(cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) || !cs->gicr_propbaser ||
> + !cs->gicr_pendbaser || (idbits < GICR_PROPBASER_IDBITS_THRESHOLD) ||
You don't need to explicitly look for "idbits <
GICR_PROPBASER_IDBITS_THRESHOLD":
if that is true then the irq will always be greater than the maximum imposed by
idbits and we'll throw it out that way.
> + (irq > (1ULL << (idbits + 1)))) {
This is off by one -- 1 << (bitcount) is not the largest permitted intID,
it is one greater than that.
> + return;
> + }
> +
> + /* set/clear the pending bit for this irq */
> + gicv3_redist_lpi_pending(cs, irq, level);
> +
> + gicv3_redist_update(cs);
> +}
thanks
-- PMM
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2021-07-13 16:52 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-07 2:18 [PATCH v6 00/10] GICv3 LPI and ITS feature implementation Shashi Mallela
2021-07-07 2:18 ` [PATCH v6 01/10] hw/intc: GICv3 ITS initial framework Shashi Mallela
2021-07-08 17:24 ` Eric Auger
2021-07-07 2:18 ` [PATCH v6 02/10] hw/intc: GICv3 ITS register definitions added Shashi Mallela
2021-07-07 2:18 ` [PATCH v6 03/10] hw/intc: GICv3 ITS command queue framework Shashi Mallela
2021-07-07 2:18 ` [PATCH v6 04/10] hw/intc: GICv3 ITS Command processing Shashi Mallela
2021-07-13 16:11 ` Peter Maydell
2021-07-07 2:18 ` [PATCH v6 05/10] hw/intc: GICv3 ITS Feature enablement Shashi Mallela
2021-07-07 2:18 ` [PATCH v6 06/10] hw/intc: GICv3 redistributor ITS processing Shashi Mallela
2021-07-13 16:45 ` Peter Maydell
2021-07-07 2:18 ` [PATCH v6 07/10] hw/arm/sbsa-ref: add ITS support in SBSA GIC Shashi Mallela
2021-07-07 2:18 ` [PATCH v6 08/10] tests/data/acpi/virt: Add IORT files for ITS Shashi Mallela
2021-07-07 2:18 ` [PATCH v6 09/10] hw/arm/virt: add ITS support in virt GIC Shashi Mallela
2021-07-07 2:18 ` [PATCH v6 10/10] tests/data/acpi/virt: Update IORT files for ITS Shashi Mallela
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.