All of lore.kernel.org
 help / color / mirror / Atom feed
From: Leo Yan <leo.yan@linaro.org>
To: Mathieu Poirier <mathieu.poirier@linaro.org>,
	Suzuki K Poulose <suzuki.poulose@arm.com>,
	Mike Leach <mike.leach@linaro.org>,
	Alexander Shishkin <alexander.shishkin@linux.intel.com>,
	coresight@lists.linaro.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Leo Yan <leo.yan@linaro.org>
Subject: [PATCH v1] coresight: tmc-etr: Speed up for bounce buffer in flat mode
Date: Sat, 10 Jul 2021 13:00:46 +0800	[thread overview]
Message-ID: <20210710050046.414669-1-leo.yan@linaro.org> (raw)

The AUX bounce buffer is allocated with API dma_alloc_coherent(), in the
low level's architecture code, e.g. for Arm64, it maps the memory with
the attribution "Normal non-cacheable"; this can be concluded from the
definition for pgprot_dmacoherent() in arch/arm64/include/asm/pgtable.h.

Later when access the AUX bounce buffer, since the memory mapping is
non-cacheable, it's low efficiency due to every load instruction must
reach out DRAM.

This patch changes to allocate pages with alloc_pages_node(), thus the
driver can access the memory with cacheable mapping in the kernel linear
virtual address; therefore, because load instructions can fetch data
from cache lines rather than always read data from DRAM, the driver can
boost memory coping performance.  After using the cacheable mapping, the
driver uses dma_sync_single_for_cpu() to invalidate cacheline prior to
read bounce buffer so can avoid read stale trace data.

By measurement the duration for function tmc_update_etr_buffer() with
ftrace function_graph tracer, it shows the performance significant
improvement for copying 4MiB data from bounce buffer:

  # echo tmc_etr_get_data_flat_buf > set_graph_notrace // avoid noise
  # echo tmc_update_etr_buffer > set_graph_function
  # echo function_graph > current_tracer

  before:

  # CPU  DURATION                  FUNCTION CALLS
  # |     |   |                     |   |   |   |
  2)               |    tmc_update_etr_buffer() {
  ...
  2) # 8148.320 us |    }

  after:

  # CPU  DURATION                  FUNCTION CALLS
  # |     |   |                     |   |   |   |
  2)               |  tmc_update_etr_buffer() {
  ...
  2) # 2463.980 us |  }

Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 .../hwtracing/coresight/coresight-tmc-etr.c   | 58 ++++++++++++++++---
 1 file changed, 49 insertions(+), 9 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c
index acdb59e0e661..94558dc5bcf4 100644
--- a/drivers/hwtracing/coresight/coresight-tmc-etr.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c
@@ -21,6 +21,7 @@
 
 struct etr_flat_buf {
 	struct device	*dev;
+	struct page	*pages;
 	dma_addr_t	daddr;
 	void		*vaddr;
 	size_t		size;
@@ -600,6 +601,7 @@ static int tmc_etr_alloc_flat_buf(struct tmc_drvdata *drvdata,
 {
 	struct etr_flat_buf *flat_buf;
 	struct device *real_dev = drvdata->csdev->dev.parent;
+	ssize_t	aligned_size;
 
 	/* We cannot reuse existing pages for flat buf */
 	if (pages)
@@ -609,12 +611,17 @@ static int tmc_etr_alloc_flat_buf(struct tmc_drvdata *drvdata,
 	if (!flat_buf)
 		return -ENOMEM;
 
-	flat_buf->vaddr = dma_alloc_coherent(real_dev, etr_buf->size,
-					     &flat_buf->daddr, GFP_KERNEL);
-	if (!flat_buf->vaddr) {
-		kfree(flat_buf);
-		return -ENOMEM;
-	}
+	aligned_size = PAGE_ALIGN(etr_buf->size);
+	flat_buf->pages = alloc_pages_node(node, GFP_KERNEL | __GFP_ZERO,
+					   get_order(aligned_size));
+	if (!flat_buf->pages)
+		goto fail_alloc_pages;
+
+	flat_buf->vaddr = page_address(flat_buf->pages);
+	flat_buf->daddr = dma_map_page(real_dev, flat_buf->pages, 0,
+				       aligned_size, DMA_FROM_DEVICE);
+	if (dma_mapping_error(real_dev, flat_buf->daddr))
+		goto fail_dma_map_page;
 
 	flat_buf->size = etr_buf->size;
 	flat_buf->dev = &drvdata->csdev->dev;
@@ -622,23 +629,34 @@ static int tmc_etr_alloc_flat_buf(struct tmc_drvdata *drvdata,
 	etr_buf->mode = ETR_MODE_FLAT;
 	etr_buf->private = flat_buf;
 	return 0;
+
+fail_dma_map_page:
+	__free_pages(flat_buf->pages, get_order(aligned_size));
+fail_alloc_pages:
+	kfree(flat_buf);
+	return -ENOMEM;
 }
 
 static void tmc_etr_free_flat_buf(struct etr_buf *etr_buf)
 {
 	struct etr_flat_buf *flat_buf = etr_buf->private;
 
-	if (flat_buf && flat_buf->daddr) {
+	if (flat_buf && flat_buf->vaddr) {
 		struct device *real_dev = flat_buf->dev->parent;
+		ssize_t aligned_size = PAGE_ALIGN(etr_buf->size);
 
-		dma_free_coherent(real_dev, flat_buf->size,
-				  flat_buf->vaddr, flat_buf->daddr);
+		dma_unmap_page(real_dev, flat_buf->daddr, aligned_size,
+			       DMA_FROM_DEVICE);
+		__free_pages(flat_buf->pages, get_order(aligned_size));
 	}
 	kfree(flat_buf);
 }
 
 static void tmc_etr_sync_flat_buf(struct etr_buf *etr_buf, u64 rrp, u64 rwp)
 {
+	struct etr_flat_buf *flat_buf = etr_buf->private;
+	struct device *real_dev = flat_buf->dev->parent;
+
 	/*
 	 * Adjust the buffer to point to the beginning of the trace data
 	 * and update the available trace data.
@@ -648,6 +666,28 @@ static void tmc_etr_sync_flat_buf(struct etr_buf *etr_buf, u64 rrp, u64 rwp)
 		etr_buf->len = etr_buf->size;
 	else
 		etr_buf->len = rwp - rrp;
+
+	if (etr_buf->offset + etr_buf->len > etr_buf->size) {
+		int len1, len2;
+
+		/*
+		 * If trace data is wrapped around, sync AUX bounce buffer
+		 * for two chunks: "len1" is for the trace date length at
+		 * the tail of bounce buffer, and "len2" is the length from
+		 * the start of the buffer after wrapping around.
+		 */
+		len1 = etr_buf->size - etr_buf->offset;
+		len2 = etr_buf->len - len1;
+		dma_sync_single_for_cpu(real_dev,
+					flat_buf->daddr + etr_buf->offset,
+					len1, DMA_FROM_DEVICE);
+		dma_sync_single_for_cpu(real_dev, flat_buf->daddr,
+					len2, DMA_FROM_DEVICE);
+	} else {
+		dma_sync_single_for_cpu(real_dev,
+					flat_buf->daddr + etr_buf->offset,
+					etr_buf->len, DMA_FROM_DEVICE);
+	}
 }
 
 static ssize_t tmc_etr_get_data_flat_buf(struct etr_buf *etr_buf,
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Leo Yan <leo.yan@linaro.org>
To: Mathieu Poirier <mathieu.poirier@linaro.org>,
	Suzuki K Poulose <suzuki.poulose@arm.com>,
	Mike Leach <mike.leach@linaro.org>,
	Alexander Shishkin <alexander.shishkin@linux.intel.com>,
	coresight@lists.linaro.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Leo Yan <leo.yan@linaro.org>
Subject: [PATCH v1] coresight: tmc-etr: Speed up for bounce buffer in flat mode
Date: Sat, 10 Jul 2021 13:00:46 +0800	[thread overview]
Message-ID: <20210710050046.414669-1-leo.yan@linaro.org> (raw)

The AUX bounce buffer is allocated with API dma_alloc_coherent(), in the
low level's architecture code, e.g. for Arm64, it maps the memory with
the attribution "Normal non-cacheable"; this can be concluded from the
definition for pgprot_dmacoherent() in arch/arm64/include/asm/pgtable.h.

Later when access the AUX bounce buffer, since the memory mapping is
non-cacheable, it's low efficiency due to every load instruction must
reach out DRAM.

This patch changes to allocate pages with alloc_pages_node(), thus the
driver can access the memory with cacheable mapping in the kernel linear
virtual address; therefore, because load instructions can fetch data
from cache lines rather than always read data from DRAM, the driver can
boost memory coping performance.  After using the cacheable mapping, the
driver uses dma_sync_single_for_cpu() to invalidate cacheline prior to
read bounce buffer so can avoid read stale trace data.

By measurement the duration for function tmc_update_etr_buffer() with
ftrace function_graph tracer, it shows the performance significant
improvement for copying 4MiB data from bounce buffer:

  # echo tmc_etr_get_data_flat_buf > set_graph_notrace // avoid noise
  # echo tmc_update_etr_buffer > set_graph_function
  # echo function_graph > current_tracer

  before:

  # CPU  DURATION                  FUNCTION CALLS
  # |     |   |                     |   |   |   |
  2)               |    tmc_update_etr_buffer() {
  ...
  2) # 8148.320 us |    }

  after:

  # CPU  DURATION                  FUNCTION CALLS
  # |     |   |                     |   |   |   |
  2)               |  tmc_update_etr_buffer() {
  ...
  2) # 2463.980 us |  }

Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 .../hwtracing/coresight/coresight-tmc-etr.c   | 58 ++++++++++++++++---
 1 file changed, 49 insertions(+), 9 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c
index acdb59e0e661..94558dc5bcf4 100644
--- a/drivers/hwtracing/coresight/coresight-tmc-etr.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c
@@ -21,6 +21,7 @@
 
 struct etr_flat_buf {
 	struct device	*dev;
+	struct page	*pages;
 	dma_addr_t	daddr;
 	void		*vaddr;
 	size_t		size;
@@ -600,6 +601,7 @@ static int tmc_etr_alloc_flat_buf(struct tmc_drvdata *drvdata,
 {
 	struct etr_flat_buf *flat_buf;
 	struct device *real_dev = drvdata->csdev->dev.parent;
+	ssize_t	aligned_size;
 
 	/* We cannot reuse existing pages for flat buf */
 	if (pages)
@@ -609,12 +611,17 @@ static int tmc_etr_alloc_flat_buf(struct tmc_drvdata *drvdata,
 	if (!flat_buf)
 		return -ENOMEM;
 
-	flat_buf->vaddr = dma_alloc_coherent(real_dev, etr_buf->size,
-					     &flat_buf->daddr, GFP_KERNEL);
-	if (!flat_buf->vaddr) {
-		kfree(flat_buf);
-		return -ENOMEM;
-	}
+	aligned_size = PAGE_ALIGN(etr_buf->size);
+	flat_buf->pages = alloc_pages_node(node, GFP_KERNEL | __GFP_ZERO,
+					   get_order(aligned_size));
+	if (!flat_buf->pages)
+		goto fail_alloc_pages;
+
+	flat_buf->vaddr = page_address(flat_buf->pages);
+	flat_buf->daddr = dma_map_page(real_dev, flat_buf->pages, 0,
+				       aligned_size, DMA_FROM_DEVICE);
+	if (dma_mapping_error(real_dev, flat_buf->daddr))
+		goto fail_dma_map_page;
 
 	flat_buf->size = etr_buf->size;
 	flat_buf->dev = &drvdata->csdev->dev;
@@ -622,23 +629,34 @@ static int tmc_etr_alloc_flat_buf(struct tmc_drvdata *drvdata,
 	etr_buf->mode = ETR_MODE_FLAT;
 	etr_buf->private = flat_buf;
 	return 0;
+
+fail_dma_map_page:
+	__free_pages(flat_buf->pages, get_order(aligned_size));
+fail_alloc_pages:
+	kfree(flat_buf);
+	return -ENOMEM;
 }
 
 static void tmc_etr_free_flat_buf(struct etr_buf *etr_buf)
 {
 	struct etr_flat_buf *flat_buf = etr_buf->private;
 
-	if (flat_buf && flat_buf->daddr) {
+	if (flat_buf && flat_buf->vaddr) {
 		struct device *real_dev = flat_buf->dev->parent;
+		ssize_t aligned_size = PAGE_ALIGN(etr_buf->size);
 
-		dma_free_coherent(real_dev, flat_buf->size,
-				  flat_buf->vaddr, flat_buf->daddr);
+		dma_unmap_page(real_dev, flat_buf->daddr, aligned_size,
+			       DMA_FROM_DEVICE);
+		__free_pages(flat_buf->pages, get_order(aligned_size));
 	}
 	kfree(flat_buf);
 }
 
 static void tmc_etr_sync_flat_buf(struct etr_buf *etr_buf, u64 rrp, u64 rwp)
 {
+	struct etr_flat_buf *flat_buf = etr_buf->private;
+	struct device *real_dev = flat_buf->dev->parent;
+
 	/*
 	 * Adjust the buffer to point to the beginning of the trace data
 	 * and update the available trace data.
@@ -648,6 +666,28 @@ static void tmc_etr_sync_flat_buf(struct etr_buf *etr_buf, u64 rrp, u64 rwp)
 		etr_buf->len = etr_buf->size;
 	else
 		etr_buf->len = rwp - rrp;
+
+	if (etr_buf->offset + etr_buf->len > etr_buf->size) {
+		int len1, len2;
+
+		/*
+		 * If trace data is wrapped around, sync AUX bounce buffer
+		 * for two chunks: "len1" is for the trace date length at
+		 * the tail of bounce buffer, and "len2" is the length from
+		 * the start of the buffer after wrapping around.
+		 */
+		len1 = etr_buf->size - etr_buf->offset;
+		len2 = etr_buf->len - len1;
+		dma_sync_single_for_cpu(real_dev,
+					flat_buf->daddr + etr_buf->offset,
+					len1, DMA_FROM_DEVICE);
+		dma_sync_single_for_cpu(real_dev, flat_buf->daddr,
+					len2, DMA_FROM_DEVICE);
+	} else {
+		dma_sync_single_for_cpu(real_dev,
+					flat_buf->daddr + etr_buf->offset,
+					etr_buf->len, DMA_FROM_DEVICE);
+	}
 }
 
 static ssize_t tmc_etr_get_data_flat_buf(struct etr_buf *etr_buf,
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-07-10  5:00 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-10  5:00 Leo Yan [this message]
2021-07-10  5:00 ` [PATCH v1] coresight: tmc-etr: Speed up for bounce buffer in flat mode Leo Yan
2021-07-10  7:05 ` Leo Yan
2021-07-10  7:05   ` Leo Yan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210710050046.414669-1-leo.yan@linaro.org \
    --to=leo.yan@linaro.org \
    --cc=alexander.shishkin@linux.intel.com \
    --cc=coresight@lists.linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mathieu.poirier@linaro.org \
    --cc=mike.leach@linaro.org \
    --cc=suzuki.poulose@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.