* [PULL 01/11] block/mirror: set .co for active-write MirrorOp objects
2021-07-20 15:10 [PULL 00/11] Block layer patches Kevin Wolf
@ 2021-07-20 15:10 ` Kevin Wolf
2021-07-20 15:10 ` [PULL 02/11] iotest 151: add test-case that shows active mirror dead-lock Kevin Wolf
` (10 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Kevin Wolf @ 2021-07-20 15:10 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
This field is unused, but it very helpful for debugging.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210702211636.228981-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/mirror.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/block/mirror.c b/block/mirror.c
index 019f6deaa5..ad6aac2f95 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -1343,6 +1343,7 @@ static MirrorOp *coroutine_fn active_write_prepare(MirrorBlockJob *s,
.bytes = bytes,
.is_active_write = true,
.is_in_flight = true,
+ .co = qemu_coroutine_self(),
};
qemu_co_queue_init(&op->waiting_requests);
QTAILQ_INSERT_TAIL(&s->ops_in_flight, op, next);
--
2.31.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PULL 02/11] iotest 151: add test-case that shows active mirror dead-lock
2021-07-20 15:10 [PULL 00/11] Block layer patches Kevin Wolf
2021-07-20 15:10 ` [PULL 01/11] block/mirror: set .co for active-write MirrorOp objects Kevin Wolf
@ 2021-07-20 15:10 ` Kevin Wolf
2021-07-20 15:10 ` [PULL 03/11] block/mirror: fix active mirror dead-lock in mirror_wait_on_conflicts Kevin Wolf
` (9 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Kevin Wolf @ 2021-07-20 15:10 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
There is a dead-lock in active mirror: when we have parallel
intersecting requests (note that non intersecting requests may be
considered intersecting after aligning to mirror granularity), it may
happen that request A waits request B in mirror_wait_on_conflicts() and
request B waits for A.
Look at the test for details. Test now dead-locks, that's why it's
disabled. Next commit will fix mirror and enable the test.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210702211636.228981-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
tests/qemu-iotests/151 | 62 ++++++++++++++++++++++++++++++++++++--
tests/qemu-iotests/151.out | 4 +--
2 files changed, 62 insertions(+), 4 deletions(-)
diff --git a/tests/qemu-iotests/151 b/tests/qemu-iotests/151
index 182f6b5321..ab46c5e8ba 100755
--- a/tests/qemu-iotests/151
+++ b/tests/qemu-iotests/151
@@ -38,8 +38,9 @@ class TestActiveMirror(iotests.QMPTestCase):
'if': 'none',
'node-name': 'source-node',
'driver': iotests.imgfmt,
- 'file': {'driver': 'file',
- 'filename': source_img}}
+ 'file': {'driver': 'blkdebug',
+ 'image': {'driver': 'file',
+ 'filename': source_img}}}
blk_target = {'node-name': 'target-node',
'driver': iotests.imgfmt,
@@ -141,6 +142,63 @@ class TestActiveMirror(iotests.QMPTestCase):
self.potential_writes_in_flight = False
+ def testIntersectingActiveIO(self):
+ # FIXME: test-case is dead-locking. To reproduce dead-lock just drop
+ # this return statement
+ return
+
+ # Fill the source image
+ result = self.vm.hmp_qemu_io('source', 'write -P 1 0 2M')
+
+ # Start the block job (very slowly)
+ result = self.vm.qmp('blockdev-mirror',
+ job_id='mirror',
+ filter_node_name='mirror-node',
+ device='source-node',
+ target='target-node',
+ sync='full',
+ copy_mode='write-blocking',
+ speed=1)
+
+ self.vm.hmp_qemu_io('source', 'break write_aio A')
+ self.vm.hmp_qemu_io('source', 'aio_write 0 1M') # 1
+ self.vm.hmp_qemu_io('source', 'wait_break A')
+ self.vm.hmp_qemu_io('source', 'aio_write 0 2M') # 2
+ self.vm.hmp_qemu_io('source', 'aio_write 0 2M') # 3
+
+ # Now 2 and 3 are in mirror_wait_on_conflicts, waiting for 1
+
+ self.vm.hmp_qemu_io('source', 'break write_aio B')
+ self.vm.hmp_qemu_io('source', 'aio_write 1M 2M') # 4
+ self.vm.hmp_qemu_io('source', 'wait_break B')
+
+ # 4 doesn't wait for 2 and 3, because they didn't yet set
+ # in_flight_bitmap. So, nothing prevents 4 to go except for our
+ # break-point B.
+
+ self.vm.hmp_qemu_io('source', 'resume A')
+
+ # Now we resumed 1, so 2 and 3 goes to the next iteration of while loop
+ # in mirror_wait_on_conflicts(). They don't exit, as bitmap is dirty
+ # due to request 4. And they start to wait: 2 wait for 3, 3 wait for 2
+ # - DEAD LOCK.
+ # Note that it's important that we add request 4 at last: requests are
+ # appended to the list, so we are sure that 4 is last in the list, so 2
+ # and 3 now waits for each other, not for 4.
+
+ self.vm.hmp_qemu_io('source', 'resume B')
+
+ # Resuming 4 doesn't help, 2 and 3 already dead-locked
+ # To check the dead-lock run:
+ # gdb -p $(pidof qemu-system-x86_64) -ex 'set $job=(MirrorBlockJob *)jobs.lh_first' -ex 'p *$job->ops_in_flight.tqh_first' -ex 'p *$job->ops_in_flight.tqh_first->next.tqe_next'
+ # You'll see two MirrorOp objects waiting on each other
+
+ result = self.vm.qmp('block-job-set-speed', device='mirror', speed=0)
+ self.assert_qmp(result, 'return', {})
+ self.complete_and_wait(drive='mirror')
+
+ self.potential_writes_in_flight = False
+
if __name__ == '__main__':
iotests.main(supported_fmts=['qcow2', 'raw'],
diff --git a/tests/qemu-iotests/151.out b/tests/qemu-iotests/151.out
index 8d7e996700..89968f35d7 100644
--- a/tests/qemu-iotests/151.out
+++ b/tests/qemu-iotests/151.out
@@ -1,5 +1,5 @@
-...
+....
----------------------------------------------------------------------
-Ran 3 tests
+Ran 4 tests
OK
--
2.31.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PULL 03/11] block/mirror: fix active mirror dead-lock in mirror_wait_on_conflicts
2021-07-20 15:10 [PULL 00/11] Block layer patches Kevin Wolf
2021-07-20 15:10 ` [PULL 01/11] block/mirror: set .co for active-write MirrorOp objects Kevin Wolf
2021-07-20 15:10 ` [PULL 02/11] iotest 151: add test-case that shows active mirror dead-lock Kevin Wolf
@ 2021-07-20 15:10 ` Kevin Wolf
2021-07-20 15:10 ` [PULL 04/11] block: Add option to use driver whitelist even in tools Kevin Wolf
` (8 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Kevin Wolf @ 2021-07-20 15:10 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
It's possible that requests start to wait each other in
mirror_wait_on_conflicts(). To avoid it let's use same technique as in
block/io.c in bdrv_wait_serialising_requests_locked() /
bdrv_find_conflicting_request(): don't wait on intersecting request if
it is already waiting for some other request.
For details of the dead-lock look at testIntersectingActiveIO()
test-case which we actually fixing now.
Fixes: d06107ade0ce74dc39739bac80de84b51ec18546
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210702211636.228981-4-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/mirror.c | 12 ++++++++++++
tests/qemu-iotests/151 | 18 +++++-------------
2 files changed, 17 insertions(+), 13 deletions(-)
diff --git a/block/mirror.c b/block/mirror.c
index ad6aac2f95..98fc66eabf 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -107,6 +107,7 @@ struct MirrorOp {
bool is_in_flight;
CoQueue waiting_requests;
Coroutine *co;
+ MirrorOp *waiting_for_op;
QTAILQ_ENTRY(MirrorOp) next;
};
@@ -159,7 +160,18 @@ static void coroutine_fn mirror_wait_on_conflicts(MirrorOp *self,
if (ranges_overlap(self_start_chunk, self_nb_chunks,
op_start_chunk, op_nb_chunks))
{
+ /*
+ * If the operation is already (indirectly) waiting for us, or
+ * will wait for us as soon as it wakes up, then just go on
+ * (instead of producing a deadlock in the former case).
+ */
+ if (op->waiting_for_op) {
+ continue;
+ }
+
+ self->waiting_for_op = op;
qemu_co_queue_wait(&op->waiting_requests, NULL);
+ self->waiting_for_op = NULL;
break;
}
}
diff --git a/tests/qemu-iotests/151 b/tests/qemu-iotests/151
index ab46c5e8ba..93d14193d0 100755
--- a/tests/qemu-iotests/151
+++ b/tests/qemu-iotests/151
@@ -143,10 +143,6 @@ class TestActiveMirror(iotests.QMPTestCase):
self.potential_writes_in_flight = False
def testIntersectingActiveIO(self):
- # FIXME: test-case is dead-locking. To reproduce dead-lock just drop
- # this return statement
- return
-
# Fill the source image
result = self.vm.hmp_qemu_io('source', 'write -P 1 0 2M')
@@ -180,18 +176,14 @@ class TestActiveMirror(iotests.QMPTestCase):
# Now we resumed 1, so 2 and 3 goes to the next iteration of while loop
# in mirror_wait_on_conflicts(). They don't exit, as bitmap is dirty
- # due to request 4. And they start to wait: 2 wait for 3, 3 wait for 2
- # - DEAD LOCK.
- # Note that it's important that we add request 4 at last: requests are
- # appended to the list, so we are sure that 4 is last in the list, so 2
- # and 3 now waits for each other, not for 4.
+ # due to request 4.
+ # In the past at that point 2 and 3 would wait for each other producing
+ # a dead-lock. Now this is fixed and they will wait for request 4.
self.vm.hmp_qemu_io('source', 'resume B')
- # Resuming 4 doesn't help, 2 and 3 already dead-locked
- # To check the dead-lock run:
- # gdb -p $(pidof qemu-system-x86_64) -ex 'set $job=(MirrorBlockJob *)jobs.lh_first' -ex 'p *$job->ops_in_flight.tqh_first' -ex 'p *$job->ops_in_flight.tqh_first->next.tqe_next'
- # You'll see two MirrorOp objects waiting on each other
+ # After resuming 4, one of 2 and 3 goes first and set in_flight_bitmap,
+ # so the other will wait for it.
result = self.vm.qmp('block-job-set-speed', device='mirror', speed=0)
self.assert_qmp(result, 'return', {})
--
2.31.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PULL 04/11] block: Add option to use driver whitelist even in tools
2021-07-20 15:10 [PULL 00/11] Block layer patches Kevin Wolf
` (2 preceding siblings ...)
2021-07-20 15:10 ` [PULL 03/11] block/mirror: fix active mirror dead-lock in mirror_wait_on_conflicts Kevin Wolf
@ 2021-07-20 15:10 ` Kevin Wolf
2021-07-20 15:10 ` [PULL 05/11] replication: Remove s->active_disk Kevin Wolf
` (7 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Kevin Wolf @ 2021-07-20 15:10 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
Currently, the block driver whitelists are only applied for the system
emulator. All other binaries still give unrestricted access to all block
drivers. There are use cases where this made sense because the main
concern was avoiding customers running VMs on less optimised block
drivers and getting bad performance. Allowing the same image format e.g.
as a target for 'qemu-img convert' is not a problem then.
However, if the concern is the supportability of the driver in general,
either in full or when used read-write, not applying the list driver
whitelist in tools doesn't help - especially since qemu-nbd and
qemu-storage-daemon now give access to more or less the same operations
in block drivers as running a system emulator.
In order to address this, introduce a new configure option that enforces
the driver whitelist in all binaries.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210709164141.254097-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
configure | 14 ++++++++++++--
block.c | 3 +++
meson.build | 1 +
3 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/configure b/configure
index 63f38fa94c..232c54dcc1 100755
--- a/configure
+++ b/configure
@@ -243,6 +243,7 @@ cross_prefix=""
audio_drv_list=""
block_drv_rw_whitelist=""
block_drv_ro_whitelist=""
+block_drv_whitelist_tools="no"
host_cc="cc"
audio_win_int=""
libs_qga=""
@@ -1016,6 +1017,10 @@ for opt do
;;
--block-drv-ro-whitelist=*) block_drv_ro_whitelist=$(echo "$optarg" | sed -e 's/,/ /g')
;;
+ --enable-block-drv-whitelist-in-tools) block_drv_whitelist_tools="yes"
+ ;;
+ --disable-block-drv-whitelist-in-tools) block_drv_whitelist_tools="no"
+ ;;
--enable-debug-tcg) debug_tcg="yes"
;;
--disable-debug-tcg) debug_tcg="no"
@@ -1800,10 +1805,12 @@ Advanced options (experts only):
--block-drv-whitelist=L Same as --block-drv-rw-whitelist=L
--block-drv-rw-whitelist=L
set block driver read-write whitelist
- (affects only QEMU, not qemu-img)
+ (by default affects only QEMU, not tools like qemu-img)
--block-drv-ro-whitelist=L
set block driver read-only whitelist
- (affects only QEMU, not qemu-img)
+ (by default affects only QEMU, not tools like qemu-img)
+ --enable-block-drv-whitelist-in-tools
+ use block whitelist also in tools instead of only QEMU
--enable-trace-backends=B Set trace backend
Available backends: $trace_backend_list
--with-trace-file=NAME Full PATH,NAME of file to store traces
@@ -4583,6 +4590,9 @@ if test "$audio_win_int" = "yes" ; then
fi
echo "CONFIG_BDRV_RW_WHITELIST=$block_drv_rw_whitelist" >> $config_host_mak
echo "CONFIG_BDRV_RO_WHITELIST=$block_drv_ro_whitelist" >> $config_host_mak
+if test "$block_drv_whitelist_tools" = "yes" ; then
+ echo "CONFIG_BDRV_WHITELIST_TOOLS=y" >> $config_host_mak
+fi
if test "$xfs" = "yes" ; then
echo "CONFIG_XFS=y" >> $config_host_mak
fi
diff --git a/block.c b/block.c
index be083f389e..e97ce0b1c8 100644
--- a/block.c
+++ b/block.c
@@ -6162,6 +6162,9 @@ BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
void bdrv_init(void)
{
+#ifdef CONFIG_BDRV_WHITELIST_TOOLS
+ use_bdrv_whitelist = 1;
+#endif
module_call_init(MODULE_INIT_BLOCK);
}
diff --git a/meson.build b/meson.build
index 6e4d2d8034..2f377098d7 100644
--- a/meson.build
+++ b/meson.build
@@ -2996,6 +2996,7 @@ summary_info += {'coroutine pool': config_host['CONFIG_COROUTINE_POOL'] == '1
if have_block
summary_info += {'Block whitelist (rw)': config_host['CONFIG_BDRV_RW_WHITELIST']}
summary_info += {'Block whitelist (ro)': config_host['CONFIG_BDRV_RO_WHITELIST']}
+ summary_info += {'Use block whitelist in tools': config_host.has_key('CONFIG_BDRV_WHITELIST_TOOLS')}
summary_info += {'VirtFS support': have_virtfs}
summary_info += {'build virtiofs daemon': have_virtiofsd}
summary_info += {'Live block migration': config_host.has_key('CONFIG_LIVE_BLOCK_MIGRATION')}
--
2.31.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PULL 05/11] replication: Remove s->active_disk
2021-07-20 15:10 [PULL 00/11] Block layer patches Kevin Wolf
` (3 preceding siblings ...)
2021-07-20 15:10 ` [PULL 04/11] block: Add option to use driver whitelist even in tools Kevin Wolf
@ 2021-07-20 15:10 ` Kevin Wolf
2021-07-20 15:10 ` [PULL 06/11] replication: Reduce usage of s->hidden_disk and s->secondary_disk Kevin Wolf
` (6 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Kevin Wolf @ 2021-07-20 15:10 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Lukas Straub <lukasstraub2@web.de>
s->active_disk is bs->file. Remove it and use local variables instead.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <2534f867ea9be5b666dfce19744b7d4e2b96c976.1626619393.git.lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/replication.c | 34 +++++++++++++++++-----------------
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/block/replication.c b/block/replication.c
index 774e15df16..9ad2dfdc69 100644
--- a/block/replication.c
+++ b/block/replication.c
@@ -35,7 +35,6 @@ typedef enum {
typedef struct BDRVReplicationState {
ReplicationMode mode;
ReplicationStage stage;
- BdrvChild *active_disk;
BlockJob *commit_job;
BdrvChild *hidden_disk;
BdrvChild *secondary_disk;
@@ -307,8 +306,10 @@ out:
return ret;
}
-static void secondary_do_checkpoint(BDRVReplicationState *s, Error **errp)
+static void secondary_do_checkpoint(BlockDriverState *bs, Error **errp)
{
+ BDRVReplicationState *s = bs->opaque;
+ BdrvChild *active_disk = bs->file;
Error *local_err = NULL;
int ret;
@@ -323,13 +324,13 @@ static void secondary_do_checkpoint(BDRVReplicationState *s, Error **errp)
return;
}
- if (!s->active_disk->bs->drv) {
+ if (!active_disk->bs->drv) {
error_setg(errp, "Active disk %s is ejected",
- s->active_disk->bs->node_name);
+ active_disk->bs->node_name);
return;
}
- ret = bdrv_make_empty(s->active_disk, errp);
+ ret = bdrv_make_empty(active_disk, errp);
if (ret < 0) {
return;
}
@@ -458,6 +459,7 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,
BlockDriverState *bs = rs->opaque;
BDRVReplicationState *s;
BlockDriverState *top_bs;
+ BdrvChild *active_disk;
int64_t active_length, hidden_length, disk_length;
AioContext *aio_context;
Error *local_err = NULL;
@@ -495,15 +497,14 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,
case REPLICATION_MODE_PRIMARY:
break;
case REPLICATION_MODE_SECONDARY:
- s->active_disk = bs->file;
- if (!s->active_disk || !s->active_disk->bs ||
- !s->active_disk->bs->backing) {
+ active_disk = bs->file;
+ if (!active_disk || !active_disk->bs || !active_disk->bs->backing) {
error_setg(errp, "Active disk doesn't have backing file");
aio_context_release(aio_context);
return;
}
- s->hidden_disk = s->active_disk->bs->backing;
+ s->hidden_disk = active_disk->bs->backing;
if (!s->hidden_disk->bs || !s->hidden_disk->bs->backing) {
error_setg(errp, "Hidden disk doesn't have backing file");
aio_context_release(aio_context);
@@ -518,7 +519,7 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,
}
/* verify the length */
- active_length = bdrv_getlength(s->active_disk->bs);
+ active_length = bdrv_getlength(active_disk->bs);
hidden_length = bdrv_getlength(s->hidden_disk->bs);
disk_length = bdrv_getlength(s->secondary_disk->bs);
if (active_length < 0 || hidden_length < 0 || disk_length < 0 ||
@@ -530,9 +531,9 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,
}
/* Must be true, or the bdrv_getlength() calls would have failed */
- assert(s->active_disk->bs->drv && s->hidden_disk->bs->drv);
+ assert(active_disk->bs->drv && s->hidden_disk->bs->drv);
- if (!s->active_disk->bs->drv->bdrv_make_empty ||
+ if (!active_disk->bs->drv->bdrv_make_empty ||
!s->hidden_disk->bs->drv->bdrv_make_empty) {
error_setg(errp,
"Active disk or hidden disk doesn't support make_empty");
@@ -586,7 +587,7 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,
s->stage = BLOCK_REPLICATION_RUNNING;
if (s->mode == REPLICATION_MODE_SECONDARY) {
- secondary_do_checkpoint(s, errp);
+ secondary_do_checkpoint(bs, errp);
}
s->error = 0;
@@ -615,7 +616,7 @@ static void replication_do_checkpoint(ReplicationState *rs, Error **errp)
}
if (s->mode == REPLICATION_MODE_SECONDARY) {
- secondary_do_checkpoint(s, errp);
+ secondary_do_checkpoint(bs, errp);
}
aio_context_release(aio_context);
}
@@ -652,7 +653,6 @@ static void replication_done(void *opaque, int ret)
if (ret == 0) {
s->stage = BLOCK_REPLICATION_DONE;
- s->active_disk = NULL;
s->secondary_disk = NULL;
s->hidden_disk = NULL;
s->error = 0;
@@ -705,7 +705,7 @@ static void replication_stop(ReplicationState *rs, bool failover, Error **errp)
}
if (!failover) {
- secondary_do_checkpoint(s, errp);
+ secondary_do_checkpoint(bs, errp);
s->stage = BLOCK_REPLICATION_DONE;
aio_context_release(aio_context);
return;
@@ -713,7 +713,7 @@ static void replication_stop(ReplicationState *rs, bool failover, Error **errp)
s->stage = BLOCK_REPLICATION_FAILOVER;
s->commit_job = commit_active_start(
- NULL, s->active_disk->bs, s->secondary_disk->bs,
+ NULL, bs->file->bs, s->secondary_disk->bs,
JOB_INTERNAL, 0, BLOCKDEV_ON_ERROR_REPORT,
NULL, replication_done, bs, true, errp);
break;
--
2.31.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PULL 06/11] replication: Reduce usage of s->hidden_disk and s->secondary_disk
2021-07-20 15:10 [PULL 00/11] Block layer patches Kevin Wolf
` (4 preceding siblings ...)
2021-07-20 15:10 ` [PULL 05/11] replication: Remove s->active_disk Kevin Wolf
@ 2021-07-20 15:10 ` Kevin Wolf
2021-07-20 15:10 ` [PULL 07/11] replication: Properly attach children Kevin Wolf
` (5 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Kevin Wolf @ 2021-07-20 15:10 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Lukas Straub <lukasstraub2@web.de>
In preparation for the next patch, initialize s->hidden_disk and
s->secondary_disk later and replace access to them with local variables
in the places where they aren't initialized yet.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1eb9dc179267207d9c7eccaeb30761758e32e9ab.1626619393.git.lukasstraub2@web.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/replication.c | 45 ++++++++++++++++++++++++++++-----------------
1 file changed, 28 insertions(+), 17 deletions(-)
diff --git a/block/replication.c b/block/replication.c
index 9ad2dfdc69..25bbdf5d4b 100644
--- a/block/replication.c
+++ b/block/replication.c
@@ -366,27 +366,35 @@ static void reopen_backing_file(BlockDriverState *bs, bool writable,
Error **errp)
{
BDRVReplicationState *s = bs->opaque;
+ BdrvChild *hidden_disk, *secondary_disk;
BlockReopenQueue *reopen_queue = NULL;
+ /*
+ * s->hidden_disk and s->secondary_disk may not be set yet, as they will
+ * only be set after the children are writable.
+ */
+ hidden_disk = bs->file->bs->backing;
+ secondary_disk = hidden_disk->bs->backing;
+
if (writable) {
- s->orig_hidden_read_only = bdrv_is_read_only(s->hidden_disk->bs);
- s->orig_secondary_read_only = bdrv_is_read_only(s->secondary_disk->bs);
+ s->orig_hidden_read_only = bdrv_is_read_only(hidden_disk->bs);
+ s->orig_secondary_read_only = bdrv_is_read_only(secondary_disk->bs);
}
- bdrv_subtree_drained_begin(s->hidden_disk->bs);
- bdrv_subtree_drained_begin(s->secondary_disk->bs);
+ bdrv_subtree_drained_begin(hidden_disk->bs);
+ bdrv_subtree_drained_begin(secondary_disk->bs);
if (s->orig_hidden_read_only) {
QDict *opts = qdict_new();
qdict_put_bool(opts, BDRV_OPT_READ_ONLY, !writable);
- reopen_queue = bdrv_reopen_queue(reopen_queue, s->hidden_disk->bs,
+ reopen_queue = bdrv_reopen_queue(reopen_queue, hidden_disk->bs,
opts, true);
}
if (s->orig_secondary_read_only) {
QDict *opts = qdict_new();
qdict_put_bool(opts, BDRV_OPT_READ_ONLY, !writable);
- reopen_queue = bdrv_reopen_queue(reopen_queue, s->secondary_disk->bs,
+ reopen_queue = bdrv_reopen_queue(reopen_queue, secondary_disk->bs,
opts, true);
}
@@ -401,8 +409,8 @@ static void reopen_backing_file(BlockDriverState *bs, bool writable,
}
}
- bdrv_subtree_drained_end(s->hidden_disk->bs);
- bdrv_subtree_drained_end(s->secondary_disk->bs);
+ bdrv_subtree_drained_end(hidden_disk->bs);
+ bdrv_subtree_drained_end(secondary_disk->bs);
}
static void backup_job_cleanup(BlockDriverState *bs)
@@ -459,7 +467,7 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,
BlockDriverState *bs = rs->opaque;
BDRVReplicationState *s;
BlockDriverState *top_bs;
- BdrvChild *active_disk;
+ BdrvChild *active_disk, *hidden_disk, *secondary_disk;
int64_t active_length, hidden_length, disk_length;
AioContext *aio_context;
Error *local_err = NULL;
@@ -504,15 +512,15 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,
return;
}
- s->hidden_disk = active_disk->bs->backing;
- if (!s->hidden_disk->bs || !s->hidden_disk->bs->backing) {
+ hidden_disk = active_disk->bs->backing;
+ if (!hidden_disk->bs || !hidden_disk->bs->backing) {
error_setg(errp, "Hidden disk doesn't have backing file");
aio_context_release(aio_context);
return;
}
- s->secondary_disk = s->hidden_disk->bs->backing;
- if (!s->secondary_disk->bs || !bdrv_has_blk(s->secondary_disk->bs)) {
+ secondary_disk = hidden_disk->bs->backing;
+ if (!secondary_disk->bs || !bdrv_has_blk(secondary_disk->bs)) {
error_setg(errp, "The secondary disk doesn't have block backend");
aio_context_release(aio_context);
return;
@@ -520,8 +528,8 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,
/* verify the length */
active_length = bdrv_getlength(active_disk->bs);
- hidden_length = bdrv_getlength(s->hidden_disk->bs);
- disk_length = bdrv_getlength(s->secondary_disk->bs);
+ hidden_length = bdrv_getlength(hidden_disk->bs);
+ disk_length = bdrv_getlength(secondary_disk->bs);
if (active_length < 0 || hidden_length < 0 || disk_length < 0 ||
active_length != hidden_length || hidden_length != disk_length) {
error_setg(errp, "Active disk, hidden disk, secondary disk's length"
@@ -531,10 +539,10 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,
}
/* Must be true, or the bdrv_getlength() calls would have failed */
- assert(active_disk->bs->drv && s->hidden_disk->bs->drv);
+ assert(active_disk->bs->drv && hidden_disk->bs->drv);
if (!active_disk->bs->drv->bdrv_make_empty ||
- !s->hidden_disk->bs->drv->bdrv_make_empty) {
+ !hidden_disk->bs->drv->bdrv_make_empty) {
error_setg(errp,
"Active disk or hidden disk doesn't support make_empty");
aio_context_release(aio_context);
@@ -549,6 +557,9 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,
return;
}
+ s->hidden_disk = hidden_disk;
+ s->secondary_disk = secondary_disk;
+
/* start backup job now */
error_setg(&s->blocker,
"Block device is in use by internal backup job");
--
2.31.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PULL 07/11] replication: Properly attach children
2021-07-20 15:10 [PULL 00/11] Block layer patches Kevin Wolf
` (5 preceding siblings ...)
2021-07-20 15:10 ` [PULL 06/11] replication: Reduce usage of s->hidden_disk and s->secondary_disk Kevin Wolf
@ 2021-07-20 15:10 ` Kevin Wolf
2021-07-20 15:10 ` [PULL 08/11] replication: Remove workaround Kevin Wolf
` (4 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Kevin Wolf @ 2021-07-20 15:10 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Lukas Straub <lukasstraub2@web.de>
The replication driver needs access to the children block-nodes of
it's child so it can issue bdrv_make_empty() and bdrv_co_pwritev()
to manage the replication. However, it does this by directly copying
the BdrvChilds, which is wrong.
Fix this by properly attaching the block-nodes with
bdrv_attach_child() and requesting the required permissions.
This ultimatively fixes a potential crash in replication_co_writev(),
because it may write to s->secondary_disk if it is in state
BLOCK_REPLICATION_FAILOVER_FAILED, without requesting write
permissions first. And now the workaround in
secondary_do_checkpoint() can be removed.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <5d0539d729afb8072d0d7cde977c5066285591b4.1626619393.git.lukasstraub2@web.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/replication.c | 30 +++++++++++++++++++++++++++---
1 file changed, 27 insertions(+), 3 deletions(-)
diff --git a/block/replication.c b/block/replication.c
index 25bbdf5d4b..b74192f795 100644
--- a/block/replication.c
+++ b/block/replication.c
@@ -165,7 +165,12 @@ static void replication_child_perm(BlockDriverState *bs, BdrvChild *c,
uint64_t perm, uint64_t shared,
uint64_t *nperm, uint64_t *nshared)
{
- *nperm = BLK_PERM_CONSISTENT_READ;
+ if (role & BDRV_CHILD_PRIMARY) {
+ *nperm = BLK_PERM_CONSISTENT_READ;
+ } else {
+ *nperm = 0;
+ }
+
if ((bs->open_flags & (BDRV_O_INACTIVE | BDRV_O_RDWR)) == BDRV_O_RDWR) {
*nperm |= BLK_PERM_WRITE;
}
@@ -557,8 +562,25 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,
return;
}
- s->hidden_disk = hidden_disk;
- s->secondary_disk = secondary_disk;
+ bdrv_ref(hidden_disk->bs);
+ s->hidden_disk = bdrv_attach_child(bs, hidden_disk->bs, "hidden disk",
+ &child_of_bds, BDRV_CHILD_DATA,
+ &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ aio_context_release(aio_context);
+ return;
+ }
+
+ bdrv_ref(secondary_disk->bs);
+ s->secondary_disk = bdrv_attach_child(bs, secondary_disk->bs,
+ "secondary disk", &child_of_bds,
+ BDRV_CHILD_DATA, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ aio_context_release(aio_context);
+ return;
+ }
/* start backup job now */
error_setg(&s->blocker,
@@ -664,7 +686,9 @@ static void replication_done(void *opaque, int ret)
if (ret == 0) {
s->stage = BLOCK_REPLICATION_DONE;
+ bdrv_unref_child(bs, s->secondary_disk);
s->secondary_disk = NULL;
+ bdrv_unref_child(bs, s->hidden_disk);
s->hidden_disk = NULL;
s->error = 0;
} else {
--
2.31.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PULL 08/11] replication: Remove workaround
2021-07-20 15:10 [PULL 00/11] Block layer patches Kevin Wolf
` (6 preceding siblings ...)
2021-07-20 15:10 ` [PULL 07/11] replication: Properly attach children Kevin Wolf
@ 2021-07-20 15:10 ` Kevin Wolf
2021-07-20 15:10 ` [PULL 09/11] block/vvfat: fix: drop backing Kevin Wolf
` (3 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Kevin Wolf @ 2021-07-20 15:10 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Lukas Straub <lukasstraub2@web.de>
Remove the workaround introduced in commit
6ecbc6c52672db5c13805735ca02784879ce8285
"replication: Avoid blk_make_empty() on read-only child".
It is not needed anymore since s->hidden_disk is guaranteed to be
writable when secondary_do_checkpoint() runs. Because replication_start(),
_do_checkpoint() and _stop() are only called by COLO migration code
and COLO-migration activates all disks via bdrv_invalidate_cache_all()
before it calls these functions.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <d3acfad43879e9f376bffa7dd797ae74d0a7c81a.1626619393.git.lukasstraub2@web.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/replication.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/block/replication.c b/block/replication.c
index b74192f795..32444b9a8f 100644
--- a/block/replication.c
+++ b/block/replication.c
@@ -346,17 +346,7 @@ static void secondary_do_checkpoint(BlockDriverState *bs, Error **errp)
return;
}
- BlockBackend *blk = blk_new(qemu_get_current_aio_context(),
- BLK_PERM_WRITE, BLK_PERM_ALL);
- blk_insert_bs(blk, s->hidden_disk->bs, &local_err);
- if (local_err) {
- error_propagate(errp, local_err);
- blk_unref(blk);
- return;
- }
-
- ret = blk_make_empty(blk, errp);
- blk_unref(blk);
+ ret = bdrv_make_empty(s->hidden_disk, errp);
if (ret < 0) {
return;
}
--
2.31.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PULL 09/11] block/vvfat: fix: drop backing
2021-07-20 15:10 [PULL 00/11] Block layer patches Kevin Wolf
` (7 preceding siblings ...)
2021-07-20 15:10 ` [PULL 08/11] replication: Remove workaround Kevin Wolf
@ 2021-07-20 15:10 ` Kevin Wolf
2021-07-20 15:10 ` [PULL 10/11] block/export: Conditionally ignore set-context error Kevin Wolf
` (2 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Kevin Wolf @ 2021-07-20 15:10 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Most probably this fake backing child doesn't work anyway (see notes
about it in a8a4d15c1c34d).
Still, since 25f78d9e2de528473d52 drivers are required to set
.supports_backing if they want to call bdrv_set_backing_hd, so now
vvfat just doesn't work because of this check.
Let's finally drop this fake backing file.
Fixes: 25f78d9e2de528473d52acfcf7acdfb64e3453d4
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210715124853.13335-1-vsementsov@virtuozzo.com>
Tested-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/vvfat.c | 43 ++++---------------------------------------
1 file changed, 4 insertions(+), 39 deletions(-)
diff --git a/block/vvfat.c b/block/vvfat.c
index ae9d387da7..34bf1e3a86 100644
--- a/block/vvfat.c
+++ b/block/vvfat.c
@@ -3098,26 +3098,6 @@ static int coroutine_fn vvfat_co_block_status(BlockDriverState *bs,
return BDRV_BLOCK_DATA;
}
-static int coroutine_fn
-write_target_commit(BlockDriverState *bs, uint64_t offset, uint64_t bytes,
- QEMUIOVector *qiov, int flags)
-{
- int ret;
-
- BDRVVVFATState* s = *((BDRVVVFATState**) bs->opaque);
- qemu_co_mutex_lock(&s->lock);
- ret = try_commit(s);
- qemu_co_mutex_unlock(&s->lock);
-
- return ret;
-}
-
-static BlockDriver vvfat_write_target = {
- .format_name = "vvfat_write_target",
- .instance_size = sizeof(void*),
- .bdrv_co_pwritev = write_target_commit,
-};
-
static void vvfat_qcow_options(BdrvChildRole role, bool parent_is_format,
int *child_flags, QDict *child_options,
int parent_flags, QDict *parent_options)
@@ -3133,7 +3113,6 @@ static int enable_write_target(BlockDriverState *bs, Error **errp)
{
BDRVVVFATState *s = bs->opaque;
BlockDriver *bdrv_qcow = NULL;
- BlockDriverState *backing;
QemuOpts *opts = NULL;
int ret;
int size = sector2cluster(s, s->sector_count);
@@ -3184,13 +3163,6 @@ static int enable_write_target(BlockDriverState *bs, Error **errp)
unlink(s->qcow_filename);
#endif
- backing = bdrv_new_open_driver(&vvfat_write_target, NULL, BDRV_O_ALLOW_RDWR,
- &error_abort);
- *(void**) backing->opaque = s;
-
- bdrv_set_backing_hd(s->bs, backing, &error_abort);
- bdrv_unref(backing);
-
return 0;
err:
@@ -3205,17 +3177,10 @@ static void vvfat_child_perm(BlockDriverState *bs, BdrvChild *c,
uint64_t perm, uint64_t shared,
uint64_t *nperm, uint64_t *nshared)
{
- if (role & BDRV_CHILD_DATA) {
- /* This is a private node, nobody should try to attach to it */
- *nperm = BLK_PERM_CONSISTENT_READ | BLK_PERM_WRITE;
- *nshared = BLK_PERM_WRITE_UNCHANGED;
- } else {
- assert(role & BDRV_CHILD_COW);
- /* The backing file is there so 'commit' can use it. vvfat doesn't
- * access it in any way. */
- *nperm = 0;
- *nshared = BLK_PERM_ALL;
- }
+ assert(role & BDRV_CHILD_DATA);
+ /* This is a private node, nobody should try to attach to it */
+ *nperm = BLK_PERM_CONSISTENT_READ | BLK_PERM_WRITE;
+ *nshared = BLK_PERM_WRITE_UNCHANGED;
}
static void vvfat_close(BlockDriverState *bs)
--
2.31.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PULL 10/11] block/export: Conditionally ignore set-context error
2021-07-20 15:10 [PULL 00/11] Block layer patches Kevin Wolf
` (8 preceding siblings ...)
2021-07-20 15:10 ` [PULL 09/11] block/vvfat: fix: drop backing Kevin Wolf
@ 2021-07-20 15:10 ` Kevin Wolf
2021-07-20 15:10 ` [PULL 11/11] iotests/307: Test iothread conflict for exports Kevin Wolf
2021-07-20 18:29 ` [PULL 00/11] Block layer patches Peter Maydell
11 siblings, 0 replies; 13+ messages in thread
From: Kevin Wolf @ 2021-07-20 15:10 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Max Reitz <mreitz@redhat.com>
When invoking block-export-add with some iothread and
fixed-iothread=false, and changing the node's iothread fails, the error
is supposed to be ignored.
However, it is still stored in *errp, which is wrong. If a second error
occurs, the "*errp must be NULL" assertion in error_setv() fails:
qemu-system-x86_64: ../util/error.c:59: error_setv: Assertion
`*errp == NULL' failed.
So if fixed-iothread=false, we should ignore the error by passing NULL
to bdrv_try_set_aio_context().
Fixes: f51d23c80af73c95e0ce703ad06a300f1b3d63ef
("block/export: add iothread and fixed-iothread options")
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210624083825.29224-2-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/export/export.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/block/export/export.c b/block/export/export.c
index fec7d9f738..6d3b9964c8 100644
--- a/block/export/export.c
+++ b/block/export/export.c
@@ -111,6 +111,7 @@ BlockExport *blk_exp_add(BlockExportOptions *export, Error **errp)
if (export->has_iothread) {
IOThread *iothread;
AioContext *new_ctx;
+ Error **set_context_errp;
iothread = iothread_by_id(export->iothread);
if (!iothread) {
@@ -120,7 +121,9 @@ BlockExport *blk_exp_add(BlockExportOptions *export, Error **errp)
new_ctx = iothread_get_aio_context(iothread);
- ret = bdrv_try_set_aio_context(bs, new_ctx, errp);
+ /* Ignore errors with fixed-iothread=false */
+ set_context_errp = fixed_iothread ? errp : NULL;
+ ret = bdrv_try_set_aio_context(bs, new_ctx, set_context_errp);
if (ret == 0) {
aio_context_release(ctx);
aio_context_acquire(new_ctx);
--
2.31.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PULL 11/11] iotests/307: Test iothread conflict for exports
2021-07-20 15:10 [PULL 00/11] Block layer patches Kevin Wolf
` (9 preceding siblings ...)
2021-07-20 15:10 ` [PULL 10/11] block/export: Conditionally ignore set-context error Kevin Wolf
@ 2021-07-20 15:10 ` Kevin Wolf
2021-07-20 18:29 ` [PULL 00/11] Block layer patches Peter Maydell
11 siblings, 0 replies; 13+ messages in thread
From: Kevin Wolf @ 2021-07-20 15:10 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Max Reitz <mreitz@redhat.com>
Passing fixed-iothread=true should make iothread conflicts fatal,
whereas fixed-iothread=false should not.
Combine the second case with an error condition that is checked after
the iothread is handled, to verify that qemu does not crash if there is
such an error after changing the iothread failed.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210624083825.29224-3-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
tests/qemu-iotests/307 | 15 +++++++++++++++
tests/qemu-iotests/307.out | 8 ++++++++
2 files changed, 23 insertions(+)
diff --git a/tests/qemu-iotests/307 b/tests/qemu-iotests/307
index c7685347bc..b429b5aa50 100755
--- a/tests/qemu-iotests/307
+++ b/tests/qemu-iotests/307
@@ -41,9 +41,11 @@ with iotests.FilePath('image') as img, \
iotests.log('=== Launch VM ===')
vm.add_object('iothread,id=iothread0')
+ vm.add_object('iothread,id=iothread1')
vm.add_blockdev(f'file,filename={img},node-name=file')
vm.add_blockdev(f'{iotests.imgfmt},file=file,node-name=fmt')
vm.add_blockdev('raw,file=file,node-name=ro,read-only=on')
+ vm.add_blockdev('null-co,node-name=null')
vm.add_device(f'id=scsi0,driver=virtio-scsi,iothread=iothread0')
vm.launch()
@@ -74,6 +76,19 @@ with iotests.FilePath('image') as img, \
vm.qmp_log('query-block-exports')
iotests.qemu_nbd_list_log('-k', socket)
+ iotests.log('\n=== Add export with conflicting iothread ===')
+
+ vm.qmp_log('device_add', id='sdb', driver='scsi-hd', drive='null')
+
+ # Should fail because of fixed-iothread
+ vm.qmp_log('block-export-add', id='export1', type='nbd', node_name='null',
+ iothread='iothread1', fixed_iothread=True, writable=True)
+
+ # Should ignore the iothread conflict, but then fail because of the
+ # permission conflict (and not crash)
+ vm.qmp_log('block-export-add', id='export1', type='nbd', node_name='null',
+ iothread='iothread1', fixed_iothread=False, writable=True)
+
iotests.log('\n=== Add a writable export ===')
# This fails because share-rw=off
diff --git a/tests/qemu-iotests/307.out b/tests/qemu-iotests/307.out
index 4b0c7e155a..ec8d2be0e0 100644
--- a/tests/qemu-iotests/307.out
+++ b/tests/qemu-iotests/307.out
@@ -51,6 +51,14 @@ exports available: 1
base:allocation
+=== Add export with conflicting iothread ===
+{"execute": "device_add", "arguments": {"drive": "null", "driver": "scsi-hd", "id": "sdb"}}
+{"return": {}}
+{"execute": "block-export-add", "arguments": {"fixed-iothread": true, "id": "export1", "iothread": "iothread1", "node-name": "null", "type": "nbd", "writable": true}}
+{"error": {"class": "GenericError", "desc": "Cannot change iothread of active block backend"}}
+{"execute": "block-export-add", "arguments": {"fixed-iothread": false, "id": "export1", "iothread": "iothread1", "node-name": "null", "type": "nbd", "writable": true}}
+{"error": {"class": "GenericError", "desc": "Permission conflict on node 'null': permissions 'write' are both required by an unnamed block device (uses node 'null' as 'root' child) and unshared by block device 'sdb' (uses node 'null' as 'root' child)."}}
+
=== Add a writable export ===
{"execute": "block-export-add", "arguments": {"description": "This is the writable second export", "id": "export1", "name": "export1", "node-name": "fmt", "type": "nbd", "writable": true, "writethrough": true}}
{"error": {"class": "GenericError", "desc": "Permission conflict on node 'fmt': permissions 'write' are both required by an unnamed block device (uses node 'fmt' as 'root' child) and unshared by block device 'sda' (uses node 'fmt' as 'root' child)."}}
--
2.31.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PULL 00/11] Block layer patches
2021-07-20 15:10 [PULL 00/11] Block layer patches Kevin Wolf
` (10 preceding siblings ...)
2021-07-20 15:10 ` [PULL 11/11] iotests/307: Test iothread conflict for exports Kevin Wolf
@ 2021-07-20 18:29 ` Peter Maydell
11 siblings, 0 replies; 13+ messages in thread
From: Peter Maydell @ 2021-07-20 18:29 UTC (permalink / raw)
To: Kevin Wolf; +Cc: QEMU Developers, Qemu-block
On Tue, 20 Jul 2021 at 16:11, Kevin Wolf <kwolf@redhat.com> wrote:
>
> The following changes since commit 143c2e0432859826c9e8d5b2baa307355f1a5332:
>
> Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2021-07-19' into staging (2021-07-19 19:06:05 +0100)
>
> are available in the Git repository at:
>
> git://repo.or.cz/qemu/kevin.git tags/for-upstream
>
> for you to fetch changes up to d21471696b07f30cb00453709d055a25c1afde85:
>
> iotests/307: Test iothread conflict for exports (2021-07-20 16:49:50 +0200)
>
> ----------------------------------------------------------------
> Block layer patches
>
> - mirror: Fix active mirror deadlock
> - replication: Fix crashes due to operations on wrong BdrvChild
> - configure: Add option to use driver whitelist even in tools
> - vvfat: Fix crash when opening image read-write
> - export: Fix crash in error path with fixed-iothread=false
>
> ----------------------------------------------------------------
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/6.1
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 13+ messages in thread