[PATCH 2/4] ath11k: clean up BDF download functions

[Jouni Malinen <jouni@codeaurora.org>]

From: Anilkumar Kolli <akolli@codeaurora.org>

In current code, AHB/PCI uses two separate functions to download
BDF file. Refactor code and make a common function to send QMI BDF
download request for both AHB and PCI devices. This patch has no
functional change.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1

Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/qmi.c | 238 ++++++++++----------------
 1 file changed, 93 insertions(+), 145 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index cc82a431c8b7..a24a6647ba52 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -1917,98 +1917,71 @@ static int ath11k_qmi_request_target_cap(struct ath11k_base *ab)
 	return ret;
 }
 
-static int
-ath11k_qmi_prepare_bdf_download(struct ath11k_base *ab, int type,
-				struct qmi_wlanfw_bdf_download_req_msg_v01 *req,
-				void __iomem *bdf_addr)
-{
-	const struct firmware *fw_entry;
-	struct ath11k_board_data bd;
-	u32 fw_size;
-	int ret;
-
-	switch (type) {
-	case ATH11K_QMI_FILE_TYPE_BDF_GOLDEN:
-		memset(&bd, 0, sizeof(bd));
-
-		ret = ath11k_core_fetch_bdf(ab, &bd);
-		if (ret) {
-			ath11k_warn(ab, "failed to load board file: %d\n", ret);
-			return ret;
-		}
-
-		fw_size = min_t(u32, ab->hw_params.fw.board_size, bd.len);
-		memcpy_toio(bdf_addr, bd.data, fw_size);
-		ath11k_core_free_bdf(ab, &bd);
-		break;
-	case ATH11K_QMI_FILE_TYPE_CALDATA:
-		fw_entry = ath11k_core_firmware_request(ab, ATH11K_DEFAULT_CAL_FILE);
-		if (IS_ERR(fw_entry)) {
-			ret = PTR_ERR(fw_entry);
-			ath11k_warn(ab, "failed to load %s: %d\n",
-				    ATH11K_DEFAULT_CAL_FILE, ret);
-			return ret;
-		}
-
-		fw_size = min_t(u32, ab->hw_params.fw.board_size,
-				fw_entry->size);
-
-		memcpy_toio(bdf_addr + ab->hw_params.fw.cal_offset,
-			    fw_entry->data, fw_size);
-
-		release_firmware(fw_entry);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	req->total_size = fw_size;
-	return 0;
-}
-
-static int ath11k_qmi_load_bdf_fixed_addr(struct ath11k_base *ab)
+static int ath11k_qmi_load_file_target_mem(struct ath11k_base *ab,
+					   const u8 *data, u32 len, u8 type)
 {
 	struct qmi_wlanfw_bdf_download_req_msg_v01 *req;
 	struct qmi_wlanfw_bdf_download_resp_msg_v01 resp;
 	struct qmi_txn txn = {};
+	const u8 *temp = data;
 	void __iomem *bdf_addr = NULL;
-	int type, ret;
+	int ret;
+	u32 remaining = len;
 
 	req = kzalloc(sizeof(*req), GFP_KERNEL);
 	if (!req)
 		return -ENOMEM;
 	memset(&resp, 0, sizeof(resp));
 
-	bdf_addr = ioremap(ab->hw_params.bdf_addr, ab->hw_params.fw.board_size);
-	if (!bdf_addr) {
-		ath11k_warn(ab, "failed ioremap for board file\n");
-		ret = -EIO;
-		goto out;
+	if (ab->bus_params.fixed_bdf_addr) {
+		bdf_addr = ioremap(ab->hw_params.bdf_addr, ab->hw_params.fw.board_size);
+		if (!bdf_addr) {
+			ath11k_warn(ab, "qmi ioremap error for BDF\n");
+			ret = -EIO;
+			goto out_req;
+		}
 	}
 
-	for (type = 0; type < ATH11K_QMI_MAX_FILE_TYPE; type++) {
+	while (remaining) {
 		req->valid = 1;
 		req->file_id_valid = 1;
 		req->file_id = ab->qmi.target.board_id;
 		req->total_size_valid = 1;
+		req->total_size = remaining;
 		req->seg_id_valid = 1;
-		req->seg_id = type;
-		req->data_valid = 0;
-		req->data_len = ATH11K_QMI_MAX_BDF_FILE_NAME_SIZE;
-		req->bdf_type = 0;
-		req->bdf_type_valid = 0;
+		req->data_valid = 1;
+		req->bdf_type = type;
+		req->bdf_type_valid = 1;
 		req->end_valid = 1;
-		req->end = 1;
+		req->end = 0;
 
-		ret = ath11k_qmi_prepare_bdf_download(ab, type, req, bdf_addr);
-		if (ret < 0)
-			goto out_qmi_bdf;
+		if (remaining > QMI_WLANFW_MAX_DATA_SIZE_V01) {
+			req->data_len = QMI_WLANFW_MAX_DATA_SIZE_V01;
+		} else {
+			req->data_len = remaining;
+			req->end = 1;
+		}
+
+		if (ab->bus_params.fixed_bdf_addr) {
+			req->data_valid = 0;
+			req->end = 1;
+			req->data_len = ATH11K_QMI_MAX_BDF_FILE_NAME_SIZE;
+		} else {
+			memcpy(req->data, temp, req->data_len);
+		}
+
+		if (ab->bus_params.fixed_bdf_addr) {
+			if (type == ATH11K_QMI_FILE_TYPE_CALDATA)
+				bdf_addr += ab->hw_params.fw.cal_offset;
+
+			memcpy_toio(bdf_addr, temp, len);
+		}
 
 		ret = qmi_txn_init(&ab->qmi.handle, &txn,
 				   qmi_wlanfw_bdf_download_resp_msg_v01_ei,
 				   &resp);
 		if (ret < 0)
-			goto out_qmi_bdf;
+			goto out;
 
 		ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi bdf download req fixed addr type %d\n",
 			   type);
@@ -2019,54 +1992,54 @@ static int ath11k_qmi_load_bdf_fixed_addr(struct ath11k_base *ab)
 				       qmi_wlanfw_bdf_download_req_msg_v01_ei, req);
 		if (ret < 0) {
 			qmi_txn_cancel(&txn);
-			goto out_qmi_bdf;
+			goto out;
 		}
 
 		ret = qmi_txn_wait(&txn, msecs_to_jiffies(ATH11K_QMI_WLANFW_TIMEOUT_MS));
 		if (ret < 0)
-			goto out_qmi_bdf;
+			goto out;
 
 		if (resp.resp.result != QMI_RESULT_SUCCESS_V01) {
 			ath11k_warn(ab, "board file download request failed: %d %d\n",
 				    resp.resp.result, resp.resp.error);
 			ret = -EINVAL;
-			goto out_qmi_bdf;
+			goto out;
+		}
+
+		if (ab->bus_params.fixed_bdf_addr) {
+			remaining = 0;
+		} else {
+			remaining -= req->data_len;
+			temp += req->data_len;
+			req->seg_id++;
+			ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi bdf download request remaining %i\n",
+				   remaining);
 		}
 	}
 
-out_qmi_bdf:
-	iounmap(bdf_addr);
 out:
+	if (ab->bus_params.fixed_bdf_addr)
+		iounmap(bdf_addr);
+out_req:
 	kfree(req);
 	return ret;
 }
 
 static int ath11k_qmi_load_bdf_qmi(struct ath11k_base *ab)
 {
-	struct qmi_wlanfw_bdf_download_req_msg_v01 *req;
-	struct qmi_wlanfw_bdf_download_resp_msg_v01 resp;
+	char filename[ATH11K_QMI_MAX_BDF_FILE_NAME_SIZE];
+	const struct firmware *fw_entry;
 	struct ath11k_board_data bd;
-	unsigned int remaining;
-	struct qmi_txn txn = {};
-	int ret;
-	const u8 *temp;
-	int bdf_type;
-
-	req = kzalloc(sizeof(*req), GFP_KERNEL);
-	if (!req)
-		return -ENOMEM;
-	memset(&resp, 0, sizeof(resp));
+	u32 fw_size, file_type;
+	int ret = 0, bdf_type;
 
 	memset(&bd, 0, sizeof(bd));
 	ret = ath11k_core_fetch_bdf(ab, &bd);
 	if (ret) {
-		ath11k_warn(ab, "failed to fetch board file: %d\n", ret);
+		ath11k_warn(ab, "qmi failed to fetch board file: %d\n", ret);
 		goto out;
 	}
 
-	temp = bd.data;
-	remaining = bd.len;
-
 	if (bd.len >= SELFMAG && memcmp(bd.data, ELFMAG, SELFMAG) == 0)
 		bdf_type = ATH11K_QMI_BDF_TYPE_ELF;
 	else
@@ -2074,67 +2047,45 @@ static int ath11k_qmi_load_bdf_qmi(struct ath11k_base *ab)
 
 	ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi bdf_type %d\n", bdf_type);
 
-	while (remaining) {
-		req->valid = 1;
-		req->file_id_valid = 1;
-		req->file_id = ab->qmi.target.board_id;
-		req->total_size_valid = 1;
-		req->total_size = bd.len;
-		req->seg_id_valid = 1;
-		req->data_valid = 1;
-		req->data_len = ATH11K_QMI_MAX_BDF_FILE_NAME_SIZE;
-		req->bdf_type = bdf_type;
-		req->bdf_type_valid = 1;
-		req->end_valid = 1;
-		req->end = 0;
-
-		if (remaining > QMI_WLANFW_MAX_DATA_SIZE_V01) {
-			req->data_len = QMI_WLANFW_MAX_DATA_SIZE_V01;
-		} else {
-			req->data_len = remaining;
-			req->end = 1;
-		}
-
-		memcpy(req->data, temp, req->data_len);
-
-		ret = qmi_txn_init(&ab->qmi.handle, &txn,
-				   qmi_wlanfw_bdf_download_resp_msg_v01_ei,
-				   &resp);
-		if (ret < 0)
-			goto out_qmi_bdf;
+	fw_size = bd.len;
+	fw_size = min_t(u32, ab->hw_params.fw.board_size, bd.len);
 
-		ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi bdf download request remaining %i\n",
-			   remaining);
+	ret = ath11k_qmi_load_file_target_mem(ab, bd.data, fw_size, bdf_type);
+	if (ret < 0) {
+		ath11k_warn(ab, "qmi failed to load bdf file\n");
+		goto out;
+	}
 
-		ret = qmi_send_request(&ab->qmi.handle, NULL, &txn,
-				       QMI_WLANFW_BDF_DOWNLOAD_REQ_V01,
-				       QMI_WLANFW_BDF_DOWNLOAD_REQ_MSG_V01_MAX_LEN,
-				       qmi_wlanfw_bdf_download_req_msg_v01_ei, req);
-		if (ret < 0) {
-			qmi_txn_cancel(&txn);
-			goto out_qmi_bdf;
-		}
+	/* QCA6390 does not support cal data file, skip it */
+	if (bdf_type == ATH11K_QMI_BDF_TYPE_ELF)
+		goto out;
 
-		ret = qmi_txn_wait(&txn, msecs_to_jiffies(ATH11K_QMI_WLANFW_TIMEOUT_MS));
-		if (ret < 0)
-			goto out_qmi_bdf;
+	file_type = ATH11K_QMI_FILE_TYPE_CALDATA;
+	fw_entry = ath11k_core_firmware_request(ab, ATH11K_DEFAULT_CAL_FILE);
+	if (IS_ERR(fw_entry)) {
+		ret = PTR_ERR(fw_entry);
+		ath11k_warn(ab,
+			    "qmi failed to load CAL data file:%s\n",
+			    filename);
+		goto out;
+	}
 
-		if (resp.resp.result != QMI_RESULT_SUCCESS_V01) {
-			ath11k_warn(ab, "bdf download request failed: %d %d\n",
-				    resp.resp.result, resp.resp.error);
-			ret = resp.resp.result;
-			goto out_qmi_bdf;
-		}
-		remaining -= req->data_len;
-		temp += req->data_len;
-		req->seg_id++;
+	fw_size = min_t(u32, ab->hw_params.fw.board_size, fw_entry->size);
+	ret = ath11k_qmi_load_file_target_mem(ab, fw_entry->data, fw_size, file_type);
+	if (ret < 0) {
+		ath11k_warn(ab, "qmi failed to load caldata\n");
+		goto out_qmi_cal;
 	}
 
-out_qmi_bdf:
-	ath11k_core_free_bdf(ab, &bd);
+	ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi caldata downloaded: type: %u\n",
+		   file_type);
 
+out_qmi_cal:
+	release_firmware(fw_entry);
 out:
-	kfree(req);
+	ath11k_core_free_bdf(ab, &bd);
+	ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi BDF download sequence completed\n");
+
 	return ret;
 }
 
@@ -2519,10 +2470,7 @@ static int ath11k_qmi_event_load_bdf(struct ath11k_qmi *qmi)
 		return ret;
 	}
 
-	if (ab->bus_params.fixed_bdf_addr)
-		ret = ath11k_qmi_load_bdf_fixed_addr(ab);
-	else
-		ret = ath11k_qmi_load_bdf_qmi(ab);
+	ret = ath11k_qmi_load_bdf_qmi(ab);
 	if (ret < 0) {
 		ath11k_warn(ab, "failed to load board data file: %d\n", ret);
 		return ret;
-- 
2.25.1