* [Buildroot] [PATCH v5] board: Add support for terasic DE10 Nano
@ 2021-07-26 7:15 Gwenhael Goavec-Merou
2021-07-26 21:41 ` Thomas Petazzoni
0 siblings, 1 reply; 2+ messages in thread
From: Gwenhael Goavec-Merou @ 2021-07-26 7:15 UTC (permalink / raw)
To: buildroot; +Cc: Gwenhael Goavec-Merou, Thomas Petazzoni
From: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Terasic DE10 Nano is an SoCFPGA cycloneV based board.
References:
- https://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&CategoryNo=205&No=1046
- https://rocketboards.org/foswiki/Documentation/DE10NanoDevelopmentBoard
Note: there is no dts in kernel (mainline or intel), but since DE0 Nano Soc is
similar, the corresponding dts is usually used
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
---
Changes v4 -> v5:
- don't creates boot.img partition, uses directly barebox-socfpga-de10_nano-xload.img instead (Thomas)
Changes v3 -> v4:
- fix genimage.cfg indent (Thomas)
- drop rootfs size from genimage.cfg, use BR2_TARGET_ROOTFS_EXT2_SIZE instead (Thomas)
- s/BR2_KERNEL_HEADERS_5_11/BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_11/g (Thomas)
Changes v2 -> v3:
- use barebox default version: v2021.07.0 is now released with DE10 Nano support
Changes v1 -> v2:
- add defconfig and board path in DEVELOPERS
---
DEVELOPERS | 2 +
.../de10nano_cyclone5/barebox-env/boot/mmc | 8 ++++
.../barebox-env/init/automount | 5 +++
.../barebox-env/nv/boot.default | 1 +
.../barebox-env/nv/linux.bootargs.console | 1 +
board/terasic/de10nano_cyclone5/genimage.cfg | 42 +++++++++++++++++++
board/terasic/de10nano_cyclone5/readme.txt | 41 ++++++++++++++++++
configs/terasic_de10nano_cyclone5_defconfig | 29 +++++++++++++
8 files changed, 129 insertions(+)
create mode 100644 board/terasic/de10nano_cyclone5/barebox-env/boot/mmc
create mode 100644 board/terasic/de10nano_cyclone5/barebox-env/init/automount
create mode 100644 board/terasic/de10nano_cyclone5/barebox-env/nv/boot.default
create mode 100644 board/terasic/de10nano_cyclone5/barebox-env/nv/linux.bootargs.console
create mode 100644 board/terasic/de10nano_cyclone5/genimage.cfg
create mode 100644 board/terasic/de10nano_cyclone5/readme.txt
create mode 100644 configs/terasic_de10nano_cyclone5_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index f722ec9611..48d7ac4876 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1109,6 +1109,8 @@ F: configs/arm_juno_defconfig
F: board/arm/juno/
N: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
+F: board/terasic/de10nano_cyclone5/
+F: configs/terasic_de10nano_cyclone5_defconfig
F: package/gnuradio/
F: package/gqrx/
F: package/gr-osmosdr/
diff --git a/board/terasic/de10nano_cyclone5/barebox-env/boot/mmc b/board/terasic/de10nano_cyclone5/barebox-env/boot/mmc
new file mode 100644
index 0000000000..fed2b0b45d
--- /dev/null
+++ b/board/terasic/de10nano_cyclone5/barebox-env/boot/mmc
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+global.bootm.oftree="/boot/socfpga_cyclone5_de0_nano_soc.dtb"
+global.bootm.image="/boot/zImage"
+
+#bootargs-ip
+
+global.linux.bootargs.dyn.root="root=/dev/mmcblk0p3 rw rootwait"
diff --git a/board/terasic/de10nano_cyclone5/barebox-env/init/automount b/board/terasic/de10nano_cyclone5/barebox-env/init/automount
new file mode 100644
index 0000000000..4092ecbaec
--- /dev/null
+++ b/board/terasic/de10nano_cyclone5/barebox-env/init/automount
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+# SD card slot, first partition
+mkdir -p /mnt/mmcblk0p2
+automount -d /mnt/mmcblk0p2 'mount /dev/mmc0.1 /mnt/mmcblk0p2'
diff --git a/board/terasic/de10nano_cyclone5/barebox-env/nv/boot.default b/board/terasic/de10nano_cyclone5/barebox-env/nv/boot.default
new file mode 100644
index 0000000000..61f529d69a
--- /dev/null
+++ b/board/terasic/de10nano_cyclone5/barebox-env/nv/boot.default
@@ -0,0 +1 @@
+mmc
diff --git a/board/terasic/de10nano_cyclone5/barebox-env/nv/linux.bootargs.console b/board/terasic/de10nano_cyclone5/barebox-env/nv/linux.bootargs.console
new file mode 100644
index 0000000000..476b1fbe49
--- /dev/null
+++ b/board/terasic/de10nano_cyclone5/barebox-env/nv/linux.bootargs.console
@@ -0,0 +1 @@
+console=ttyS0,115200
diff --git a/board/terasic/de10nano_cyclone5/genimage.cfg b/board/terasic/de10nano_cyclone5/genimage.cfg
new file mode 100644
index 0000000000..76b1d03649
--- /dev/null
+++ b/board/terasic/de10nano_cyclone5/genimage.cfg
@@ -0,0 +1,42 @@
+image boot.vfat {
+ vfat {
+ file zImage {
+ image = "zImage"
+ }
+
+ file socfpga_cyclone5_de0_nano_soc.dtb {
+ image = "socfpga_cyclone5_de0_nano_soc.dtb"
+ }
+
+ file barebox.bin {
+ image = "barebox-socfpga-de10_nano.img"
+ }
+
+ file barebox.env {
+ image = "barebox-env"
+ }
+ }
+ size = 8M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition spl {
+ partition-type = 0xa2
+ image = "barebox-socfpga-de10_nano-xload.img"
+ size = 1M
+ }
+
+ partition boot {
+ partition-type = 0xc
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext2"
+ }
+}
diff --git a/board/terasic/de10nano_cyclone5/readme.txt b/board/terasic/de10nano_cyclone5/readme.txt
new file mode 100644
index 0000000000..f9d8fc756a
--- /dev/null
+++ b/board/terasic/de10nano_cyclone5/readme.txt
@@ -0,0 +1,41 @@
+Terasic DE10 Nano Development Board
+
+Intro
+=====
+
+More information about this board can be found here:
+https://rocketboards.org/foswiki/Documentation/DE10NanoDevelopmentBoard
+
+Build
+=====
+
+First, load socrates config for buildroot
+
+ make terasic_de10nano_cyclone5_defconfig
+
+Build everything
+
+ make
+
+Following files will be generated in output/images
+
+.
+├── barebox-env
+├── barebox-socfpga-de10_nano.img
+├── barebox-socfpga-de10_nano-xload.img
+├── boot.vfat
+├── rootfs.ext2
+├── rootfs.ext4 -> rootfs.ext2
+├── rootfs.tar
+├── sdcard.img
+├── socfpga_cyclone5_de0_nano_soc.dtb
+└── zImage
+
+Creating bootable SD card
+=========================
+
+Simply invoke
+
+dd if=output/images/sdcard.img of=/dev/sdX
+
+Where X is your SD card device (not partition)
diff --git a/configs/terasic_de10nano_cyclone5_defconfig b/configs/terasic_de10nano_cyclone5_defconfig
new file mode 100644
index 0000000000..0a35a35981
--- /dev/null
+++ b/configs/terasic_de10nano_cyclone5_defconfig
@@ -0,0 +1,29 @@
+BR2_arm=y
+BR2_cortex_a9=y
+BR2_ARM_ENABLE_NEON=y
+BR2_ARM_ENABLE_VFP=y
+BR2_ARM_FPU_NEON=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_11=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/terasic/de10nano_cyclone5/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/altera-opensource/linux-socfpga.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_socfpga-5.11_21.06.01_pr"
+BR2_LINUX_KERNEL_DEFCONFIG="socfpga"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="socfpga_cyclone5_de0_nano_soc"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+BR2_TARGET_BAREBOX=y
+BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="socfpga"
+BR2_TARGET_BAREBOX_IMAGE_FILE="images/barebox-socfpga-de10_nano.img"
+BR2_TARGET_BAREBOX_CUSTOM_ENV=y
+BR2_TARGET_BAREBOX_CUSTOM_ENV_PATH="board/terasic/de10nano_cyclone5/barebox-env"
+BR2_TARGET_BAREBOX_AUX=y
+BR2_TARGET_BAREBOX_AUX_BOARD_DEFCONFIG="socfpga-xload-2"
+BR2_TARGET_BAREBOX_AUX_IMAGE_FILE="images/barebox-socfpga-de10_nano-xload.img"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
--
2.31.1
_______________________________________________
buildroot mailing list
buildroot@busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [Buildroot] [PATCH v5] board: Add support for terasic DE10 Nano
2021-07-26 7:15 [Buildroot] [PATCH v5] board: Add support for terasic DE10 Nano Gwenhael Goavec-Merou
@ 2021-07-26 21:41 ` Thomas Petazzoni
0 siblings, 0 replies; 2+ messages in thread
From: Thomas Petazzoni @ 2021-07-26 21:41 UTC (permalink / raw)
To: Gwenhael Goavec-Merou; +Cc: Gwenhael Goavec-Merou, buildroot
On Mon, 26 Jul 2021 09:15:40 +0200
Gwenhael Goavec-Merou <gwenj@trabucayre.com> wrote:
> From: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
>
> Terasic DE10 Nano is an SoCFPGA cycloneV based board.
> References:
> - https://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&CategoryNo=205&No=1046
> - https://rocketboards.org/foswiki/Documentation/DE10NanoDevelopmentBoard
>
> Note: there is no dts in kernel (mainline or intel), but since DE0 Nano Soc is
> similar, the corresponding dts is usually used
>
> Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
There was one minor detail left: the version of Barebox was not set in
your defconfig, so it would just use the "latest", which we don't want
for defconfigs. I fixed that up when applying to master. Thanks!
Best regards,
Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
buildroot mailing list
buildroot@busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-07-26 21:42 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-26 7:15 [Buildroot] [PATCH v5] board: Add support for terasic DE10 Nano Gwenhael Goavec-Merou
2021-07-26 21:41 ` Thomas Petazzoni
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.