* [PATCH v2 2/3] manuals: simplify references to BitBake manual
2021-07-27 17:11 ` [PATCH v2 0/3] Improve/simplify references to the BitBake manual Michael Opdenacker
2021-07-27 17:11 ` [PATCH v2 1/3] documentation/README: improve BitBake manual referencing guidelines Michael Opdenacker
@ 2021-07-27 17:11 ` Michael Opdenacker
2021-07-28 8:46 ` [docs] " Quentin Schulz
2021-07-27 17:11 ` [PATCH v2 3/3] manuals: remove explicit BitBake variable references Michael Opdenacker
2021-07-28 8:48 ` [docs] [PATCH v2 0/3] Improve/simplify references to the BitBake manual Quentin Schulz
3 siblings, 1 reply; 9+ messages in thread
From: Michael Opdenacker @ 2021-07-27 17:11 UTC (permalink / raw)
To: docs; +Cc: Michael Opdenacker
Replacing ":ref:`section name<bitbake:bitbake-user-manual/bitbake-user-manual-<section>:section name>`"
by ":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-<section>:section name`"
when the reference description is the same as the section name.
In this case, that's unnecessary to repeat the section name in the description part.
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
---
documentation/brief-yoctoprojectqs/index.rst | 4 ++--
documentation/dev-manual/common-tasks.rst | 2 +-
documentation/migration-guides/migration-2.4.rst | 4 ++--
documentation/overview-manual/concepts.rst | 6 +++---
documentation/ref-manual/tasks.rst | 4 ++--
documentation/ref-manual/variables.rst | 12 ++++++------
documentation/sdk-manual/extensible.rst | 2 +-
7 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/documentation/brief-yoctoprojectqs/index.rst b/documentation/brief-yoctoprojectqs/index.rst
index 8e2f2d423c..e999d925b8 100644
--- a/documentation/brief-yoctoprojectqs/index.rst
+++ b/documentation/brief-yoctoprojectqs/index.rst
@@ -267,8 +267,8 @@ an entire Linux distribution, including the toolchain, from source.
For information on using the ``bitbake`` command, see the
:ref:`overview-manual/concepts:bitbake` section in the Yocto Project Overview and
- Concepts Manual, or see the ":ref:`BitBake Command
- <bitbake:bitbake-user-manual/bitbake-user-manual-intro:the bitbake command>`" section in the BitBake User Manual.
+ Concepts Manual, or see the
+ :ref:`bitbake:bitbake-user-manual/bitbake-user-manual-intro:the bitbake command` section in the BitBake User Manual.
#. **Simulate Your Image Using QEMU:** Once this particular image is
built, you can start QEMU, which is a Quick EMUlator that ships with
diff --git a/documentation/dev-manual/common-tasks.rst b/documentation/dev-manual/common-tasks.rst
index 2af2896171..e46f6a84a7 100644
--- a/documentation/dev-manual/common-tasks.rst
+++ b/documentation/dev-manual/common-tasks.rst
@@ -9358,7 +9358,7 @@ log to ``${T}/log.do_``\ `task`, and can also log to standard output
- ``bb.debug(level, msg)``: Writes "DEBUG: msg" to the
log. Also logs to stdout if the log level is greater than or equal to
- level. See the ":ref:`-D <bitbake:bitbake-user-manual/bitbake-user-manual-intro:usage and syntax>`" option
+ level. See the ":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-intro:usage and syntax`" option
in the BitBake User Manual for more information.
- ``bb.warn(msg)``: Writes "WARNING: msg" to the log while also
diff --git a/documentation/migration-guides/migration-2.4.rst b/documentation/migration-guides/migration-2.4.rst
index cab81356d8..ae1a212b5d 100644
--- a/documentation/migration-guides/migration-2.4.rst
+++ b/documentation/migration-guides/migration-2.4.rst
@@ -286,8 +286,8 @@ The following are additional changes:
- BitBake fires multiple "BuildStarted" events when multiconfig is
enabled (one per configuration). For more information, see the
- ":ref:`Events <bitbake:bitbake-user-manual/bitbake-user-manual-metadata:events>`" section in the BitBake User
- Manual.
+ ":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-metadata:events`"
+ section in the BitBake User Manual.
- By default, the ``security_flags.inc`` file sets a
:term:`GCCPIE` variable with an option to enable
diff --git a/documentation/overview-manual/concepts.rst b/documentation/overview-manual/concepts.rst
index 1e5f0f9039..6377ebc000 100644
--- a/documentation/overview-manual/concepts.rst
+++ b/documentation/overview-manual/concepts.rst
@@ -74,7 +74,7 @@ versions of ``matchbox-desktop`` might exist. BitBake chooses the one
selected by the distribution configuration. You can get more details
about how BitBake chooses between different target versions and
providers in the
-":ref:`Preferences <bitbake:bitbake-user-manual/bitbake-user-manual-execution:preferences>`" section
+":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-execution:preferences`" section
of the BitBake User Manual.
BitBake also tries to execute any dependent tasks first. So for example,
@@ -584,7 +584,7 @@ Source Control Managers (Optional)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Another place from which the build system can get source files is with
-:ref:`fetchers <bitbake:bitbake-user-manual/bitbake-user-manual-fetching:fetchers>` employing various Source
+:ref:`bitbake:bitbake-user-manual/bitbake-user-manual-fetching:fetchers` employing various Source
Control Managers (SCMs) such as Git or Subversion. In such cases, a
repository is cloned or checked out. The
:ref:`ref-tasks-fetch` task inside
@@ -1863,7 +1863,7 @@ The following list explains the previous example:
through the shared state cache if possible. If the task was
accelerated, ``sstate_setscene()`` returns True. Otherwise, it
returns False, and the normal ``do_deploy`` task runs. For more
- information, see the ":ref:`setscene <bitbake:bitbake-user-manual/bitbake-user-manual-execution:setscene>`"
+ information, see the ":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-execution:setscene`"
section in the BitBake User Manual.
- The ``do_deploy[dirs] = "${DEPLOYDIR} ${B}"`` line creates
diff --git a/documentation/ref-manual/tasks.rst b/documentation/ref-manual/tasks.rst
index 970b083942..ecc701856c 100644
--- a/documentation/ref-manual/tasks.rst
+++ b/documentation/ref-manual/tasks.rst
@@ -14,8 +14,8 @@ Normal Recipe Build Tasks
The following sections describe normal tasks associated with building a
recipe. For more information on tasks and dependencies, see the
-":ref:`Tasks <bitbake:bitbake-user-manual/bitbake-user-manual-metadata:tasks>`" and
-":ref:`Dependencies <bitbake:bitbake-user-manual/bitbake-user-manual-execution:dependencies>`" sections in the
+":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-metadata:tasks`" and
+":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-execution:dependencies`" sections in the
BitBake User Manual.
.. _ref-tasks-build:
diff --git a/documentation/ref-manual/variables.rst b/documentation/ref-manual/variables.rst
index 3de37a1ab5..55121f2c5a 100644
--- a/documentation/ref-manual/variables.rst
+++ b/documentation/ref-manual/variables.rst
@@ -256,7 +256,7 @@ system and gives an overview of their function and contents.
To add a tune to the list, be sure to append it with spaces using the
"+=" BitBake operator. Do not simply replace the list by using the
"=" operator. See the
- ":ref:`Basic Syntax <bitbake:bitbake-user-manual/bitbake-user-manual-metadata:basic syntax>`" section in the BitBake
+ ":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-metadata:basic syntax`" section in the BitBake
User Manual for more information.
:term:`AZ_SAS`
@@ -1638,8 +1638,8 @@ system and gives an overview of their function and contents.
For information on runtime dependencies, see the
:term:`RDEPENDS` variable. You can also see the
- ":ref:`Tasks <bitbake:bitbake-user-manual/bitbake-user-manual-metadata:tasks>`" and
- ":ref:`Dependencies <bitbake:bitbake-user-manual/bitbake-user-manual-execution:dependencies>`" sections in the
+ ":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-metadata:tasks`" and
+ ":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-execution:dependencies`" sections in the
BitBake User Manual for additional information on tasks and
dependencies.
@@ -6105,8 +6105,8 @@ system and gives an overview of their function and contents.
For information on build-time dependencies, see the
:term:`DEPENDS` variable. You can also see the
- ":ref:`Tasks <bitbake:bitbake-user-manual/bitbake-user-manual-metadata:tasks>`" and
- ":ref:`Dependencies <bitbake:bitbake-user-manual/bitbake-user-manual-execution:dependencies>`" sections in the
+ ":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-metadata:tasks`" and
+ ":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-execution:dependencies`" sections in the
BitBake User Manual for additional information on tasks and
dependencies.
@@ -6951,7 +6951,7 @@ system and gives an overview of their function and contents.
protocols are highly dependent on particular BitBake Fetcher
submodules. Depending on the fetcher BitBake uses, various URL
parameters are employed. For specifics on the supported Fetchers, see
- the ":ref:`Fetchers <bitbake:bitbake-user-manual/bitbake-user-manual-fetching:fetchers>`" section in the
+ the ":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-fetching:fetchers`" section in the
BitBake User Manual.
- ``file://`` - Fetches files, which are usually files shipped
diff --git a/documentation/sdk-manual/extensible.rst b/documentation/sdk-manual/extensible.rst
index 5520a07184..2cdb06d65c 100644
--- a/documentation/sdk-manual/extensible.rst
+++ b/documentation/sdk-manual/extensible.rst
@@ -614,7 +614,7 @@ specify source code revision and versioning schemes, extract code into
or out of the ``devtool``
:ref:`devtool-the-workspace-layer-structure`,
and work with any source file forms that the
-:ref:`fetchers <bitbake:bitbake-user-manual/bitbake-user-manual-fetching:fetchers>` support.
+:ref:`bitbake:bitbake-user-manual/bitbake-user-manual-fetching:fetchers` support.
The following diagram shows the common development flow used with the
``devtool upgrade`` command:
--
2.25.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 3/3] manuals: remove explicit BitBake variable references
2021-07-27 17:11 ` [PATCH v2 0/3] Improve/simplify references to the BitBake manual Michael Opdenacker
2021-07-27 17:11 ` [PATCH v2 1/3] documentation/README: improve BitBake manual referencing guidelines Michael Opdenacker
2021-07-27 17:11 ` [PATCH v2 2/3] manuals: simplify references to BitBake manual Michael Opdenacker
@ 2021-07-27 17:11 ` Michael Opdenacker
2021-07-28 8:48 ` [docs] [PATCH v2 0/3] Improve/simplify references to the BitBake manual Quentin Schulz
3 siblings, 0 replies; 9+ messages in thread
From: Michael Opdenacker @ 2021-07-27 17:11 UTC (permalink / raw)
To: docs; +Cc: Michael Opdenacker
The standard :term:`VARIABLE` will refer to the
description of the variable in the YP variable index. If it
doesn't exist, it will refer to the description of the variable
in the BitBake manual.
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
---
documentation/dev-manual/common-tasks.rst | 6 +++---
documentation/migration-guides/migration-3.0.rst | 2 +-
documentation/overview-manual/concepts.rst | 6 ++----
documentation/ref-manual/variables.rst | 5 ++---
4 files changed, 8 insertions(+), 11 deletions(-)
diff --git a/documentation/dev-manual/common-tasks.rst b/documentation/dev-manual/common-tasks.rst
index e46f6a84a7..d0099507a3 100644
--- a/documentation/dev-manual/common-tasks.rst
+++ b/documentation/dev-manual/common-tasks.rst
@@ -4384,7 +4384,7 @@ directory:
variable, inherit the
:ref:`own-mirrors <ref-classes-own-mirrors>`
class, and use the
- :term:`bitbake:BB_NO_NETWORK`
+ :term:`BB_NO_NETWORK`
variable to your ``local.conf``.
::
@@ -4457,7 +4457,7 @@ variable for more information:
- :term:`BB_NUMBER_THREADS`:
The maximum number of threads BitBake simultaneously executes.
-- :term:`bitbake:BB_NUMBER_PARSE_THREADS`:
+- :term:`BB_NUMBER_PARSE_THREADS`:
The number of threads BitBake uses during parsing.
- :term:`PARALLEL_MAKE`: Extra
@@ -9121,7 +9121,7 @@ BitBake has determined by doing the following:
The output of ``bitbake-dumpsig`` also includes the value each
variable had, a list of dependencies for each variable, and
- :term:`bitbake:BB_HASHBASE_WHITELIST`
+ :term:`BB_HASHBASE_WHITELIST`
information.
There is also a ``bitbake-diffsigs`` command for comparing two
diff --git a/documentation/migration-guides/migration-3.0.rst b/documentation/migration-guides/migration-3.0.rst
index 20c7026e8d..9a5f5714bd 100644
--- a/documentation/migration-guides/migration-3.0.rst
+++ b/documentation/migration-guides/migration-3.0.rst
@@ -194,7 +194,7 @@ The following BitBake changes have occurred.
scripts that handles these two events need to be updated.
- The arguments passed to functions used with
- :term:`bitbake:BB_HASHCHECK_FUNCTION`
+ :term:`BB_HASHCHECK_FUNCTION`
have changed. If you are using your own custom hash check function,
see :yocto_git:`/poky/commit/?id=40a5e193c4ba45c928fccd899415ea56b5417725`
for details.
diff --git a/documentation/overview-manual/concepts.rst b/documentation/overview-manual/concepts.rst
index 6377ebc000..4f8e6cb041 100644
--- a/documentation/overview-manual/concepts.rst
+++ b/documentation/overview-manual/concepts.rst
@@ -1250,11 +1250,9 @@ download or setscene task fails, the build system then tries to install
dependencies, such as the compiler, from the cache.
The availability of objects in the sstate cache is handled by the
-function specified by the
-:term:`bitbake:BB_HASHCHECK_FUNCTION`
+function specified by the :term:`BB_HASHCHECK_FUNCTION`
variable and returns a list of available objects. The function specified
-by the
-:term:`bitbake:BB_SETSCENE_DEPVALID`
+by the :term:`BB_SETSCENE_DEPVALID`
variable is the function that determines whether a given dependency
needs to be followed, and whether for any given relationship the
function needs to be passed. The function returns a True or False value.
diff --git a/documentation/ref-manual/variables.rst b/documentation/ref-manual/variables.rst
index 55121f2c5a..b61de1993d 100644
--- a/documentation/ref-manual/variables.rst
+++ b/documentation/ref-manual/variables.rst
@@ -762,8 +762,7 @@ system and gives an overview of their function and contents.
export BBSERVER=localhost:$port
- By default, :term:`BBSERVER` also appears in
- :term:`bitbake:BB_HASHBASE_WHITELIST`.
+ By default, :term:`BBSERVER` also appears in :term:`BB_HASHBASE_WHITELIST`.
Consequently, :term:`BBSERVER` is excluded from checksum and dependency
data.
@@ -6500,7 +6499,7 @@ system and gives an overview of their function and contents.
- :term:`CONF_VERSION`
- :term:`BB_NUMBER_THREADS`
- - :term:`bitbake:BB_NUMBER_PARSE_THREADS`
+ - :term:`BB_NUMBER_PARSE_THREADS`
- :term:`PARALLEL_MAKE`
- :term:`PRSERV_HOST`
- :term:`SSTATE_MIRRORS` :term:`DL_DIR`
--
2.25.1
^ permalink raw reply related [flat|nested] 9+ messages in thread