All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Arnd Bergmann <arnd@arndb.de>, Daniel Vetter <daniel@ffwll.ch>,
	David Airlie <airlied@linux.ie>, Olof Johansson <olof@lixom.net>,
	Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	soc@kernel.org, Thierry Reding <thierry.reding@gmail.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
	devicetree@vger.kernel.org, Fabio Estevam <festevam@gmail.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	dri-devel@lists.freedesktop.org, Sam Ravnborg <sam@ravnborg.org>
Subject: [PATCH v3 0/3] Mainline imx6 based SKOV boards
Date: Mon,  2 Aug 2021 12:36:00 +0200	[thread overview]
Message-ID: <20210802103603.28607-1-o.rempel@pengutronix.de> (raw)

changes v3:
- drop panel bindings patches, it is already in drm-misc-next
- remove some new lines
- reorder compatibles at the start of the nodes
- use lowercase for hex value
- add enable-active-high to the regulator-vcc-mmc-io and fix MMC voltage
  configuration.

changes v2:
- remove unnecessary newlines.
- change linux,wakeup to wakeup-source
- change switch@3 unit-address to @0
- sort aliases alphabetically

Mainline imx6 based DTs for SKOV A/S boards

Oleksij Rempel (2):
  dt-bindings: vendor-prefixes: Add an entry for SKOV A/S
  dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards

Sam Ravnborg (1):
  ARM: dts: add SKOV imx6q and imx6dl based boards

 .../devicetree/bindings/arm/fsl.yaml          |   5 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   5 +
 arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts    |  13 +
 arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts    | 106 ++++
 arch/arm/boot/dts/imx6q-skov-revc-lt2.dts     |  36 ++
 arch/arm/boot/dts/imx6q-skov-revc-lt6.dts     | 128 +++++
 .../dts/imx6q-skov-reve-mi1010ait-1cp1.dts    | 127 +++++
 arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi  |  54 ++
 arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi       | 476 ++++++++++++++++++
 10 files changed, 952 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts
 create mode 100644 arch/arm/boot/dts/imx6q-skov-revc-lt2.dts
 create mode 100644 arch/arm/boot/dts/imx6q-skov-revc-lt6.dts
 create mode 100644 arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
 create mode 100644 arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi

-- 
2.30.2


WARNING: multiple messages have this Message-ID (diff)
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Arnd Bergmann <arnd@arndb.de>, Daniel Vetter <daniel@ffwll.ch>,
	David Airlie <airlied@linux.ie>, Olof Johansson <olof@lixom.net>,
	Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	soc@kernel.org, Thierry Reding <thierry.reding@gmail.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
	devicetree@vger.kernel.org, Fabio Estevam <festevam@gmail.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	dri-devel@lists.freedesktop.org, Sam Ravnborg <sam@ravnborg.org>
Subject: [PATCH v3 0/3] Mainline imx6 based SKOV boards
Date: Mon,  2 Aug 2021 12:36:00 +0200	[thread overview]
Message-ID: <20210802103603.28607-1-o.rempel@pengutronix.de> (raw)
Message-ID: <20210802103600.PoLj5KoI0IWeFjnGAemn3ZwOpT5XTi_6DqiqoBBEziU@z> (raw)

changes v3:
- drop panel bindings patches, it is already in drm-misc-next
- remove some new lines
- reorder compatibles at the start of the nodes
- use lowercase for hex value
- add enable-active-high to the regulator-vcc-mmc-io and fix MMC voltage
  configuration.

changes v2:
- remove unnecessary newlines.
- change linux,wakeup to wakeup-source
- change switch@3 unit-address to @0
- sort aliases alphabetically

Mainline imx6 based DTs for SKOV A/S boards

Oleksij Rempel (2):
  dt-bindings: vendor-prefixes: Add an entry for SKOV A/S
  dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards

Sam Ravnborg (1):
  ARM: dts: add SKOV imx6q and imx6dl based boards

 .../devicetree/bindings/arm/fsl.yaml          |   5 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   5 +
 arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts    |  13 +
 arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts    | 106 ++++
 arch/arm/boot/dts/imx6q-skov-revc-lt2.dts     |  36 ++
 arch/arm/boot/dts/imx6q-skov-revc-lt6.dts     | 128 +++++
 .../dts/imx6q-skov-reve-mi1010ait-1cp1.dts    | 127 +++++
 arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi  |  54 ++
 arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi       | 476 ++++++++++++++++++
 10 files changed, 952 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts
 create mode 100644 arch/arm/boot/dts/imx6q-skov-revc-lt2.dts
 create mode 100644 arch/arm/boot/dts/imx6q-skov-revc-lt6.dts
 create mode 100644 arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
 create mode 100644 arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi

-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-08-02 10:36 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-02 10:36 Oleksij Rempel [this message]
2021-08-02 10:36 ` [PATCH v3 0/3] Mainline imx6 based SKOV boards Oleksij Rempel
2021-08-02 10:36 ` [PATCH v3 1/3] dt-bindings: vendor-prefixes: Add an entry for SKOV A/S Oleksij Rempel
2021-08-02 10:36   ` Oleksij Rempel
2021-08-02 10:36 ` [PATCH v3 2/3] dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards Oleksij Rempel
2021-08-02 10:36   ` Oleksij Rempel
2021-08-02 10:36 ` [PATCH v3 3/3] ARM: dts: " Oleksij Rempel
2021-08-02 10:36   ` Oleksij Rempel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210802103603.28607-1-o.rempel@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=airlied@linux.ie \
    --cc=arnd@arndb.de \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=olof@lixom.net \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=sam@ravnborg.org \
    --cc=shawnguo@kernel.org \
    --cc=soc@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.