[PATCH v5 0/4] kselftest/arm64: Vector length configuration tests

[PATCH v5 0/4] kselftest/arm64: Vector length configuration tests

[Mark Brown]

Currently we don't have full automated tests for the vector length
configuation ABIs offered for SVE, we have a helper binary for setting
the vector length which can be used for manual tests and we use the
prctl() interface to enumerate the vector lengths but don't actually
verify that the vector lengths enumerated were set.

This patch series provides a small helper which allows us to get the
currently configured vector length using the RDVL instruction via either
a library call or stdout of a process and then uses this to both add
verification of enumerated vector lengths to our existing tests and also
add a new test program which exercises both the prctl() and sysfs
interfaces.

In preparation for the forthcomng support for the Scalable Matrix
Extension (SME) [1] which introduces a new vector length managed via a
very similar hardware interface the helper and new test program are
parameterised with the goal of allowing reuse for SME.

[1] https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/scalable-matrix-extension-armv9-a-architecture

v5:
 - Fix a potentially uninialized variable case.
 - Clarify an error message.
 - Add TODO.
v4:
 - Fix fscanf() format string handling to properly confirm the newline.
 - Pull fclose() out of stdio read helper.
 - Change style of child monitoring loop.
v3:
 - Add BTI landing pads to the asm helper functions.
 - Clean up pipes used to talk to children.
 - Remove another unneeded include.
 - Make functions in the main executable static.
 - Match the newline when parsing vector length from the child.
 - Factor out the fscanf() and fclose() from parsing integers from file
   descriptors.
 - getauxval() returns unsigned long.
v2:
 - Tweak log message on failure in sve-probe-vls.
 - Stylistic changes in vec-syscfg.
 - Flush stdout before forking in vec-syscfg.
 - Use EXIT_FAILURE.
 - Use fdopen() to get child output.
 - Replace a bunch of UNIX API usage with stdio.
 - Add a TODO list.
 - Verify that we're root before testing writes to /proc.

Mark Brown (4):
  kselftest/arm64: Provide a helper binary and "library" for SVE RDVL
  kselftest/arm64: Validate vector lengths are set in sve-probe-vls
  kselftest/arm64: Add tests for SVE vector configuration
  kselftest/arm64: Add a TODO list for floating point tests

 tools/testing/selftests/arm64/fp/.gitignore   |   2 +
 tools/testing/selftests/arm64/fp/Makefile     |  11 +-
 tools/testing/selftests/arm64/fp/TODO         |   4 +
 tools/testing/selftests/arm64/fp/rdvl-sve.c   |  14 +
 tools/testing/selftests/arm64/fp/rdvl.S       |  10 +
 tools/testing/selftests/arm64/fp/rdvl.h       |   8 +
 .../selftests/arm64/fp/sve-probe-vls.c        |   5 +
 tools/testing/selftests/arm64/fp/vec-syscfg.c | 593 ++++++++++++++++++
 8 files changed, 644 insertions(+), 3 deletions(-)
 create mode 100644 tools/testing/selftests/arm64/fp/TODO
 create mode 100644 tools/testing/selftests/arm64/fp/rdvl-sve.c
 create mode 100644 tools/testing/selftests/arm64/fp/rdvl.S
 create mode 100644 tools/testing/selftests/arm64/fp/rdvl.h
 create mode 100644 tools/testing/selftests/arm64/fp/vec-syscfg.c


base-commit: ff1176468d368232b684f75e82563369208bc371
-- 
2.20.1

[PATCH v5 0/4] kselftest/arm64: Vector length configuration tests

[Mark Brown]

Currently we don't have full automated tests for the vector length
configuation ABIs offered for SVE, we have a helper binary for setting
the vector length which can be used for manual tests and we use the
prctl() interface to enumerate the vector lengths but don't actually
verify that the vector lengths enumerated were set.

This patch series provides a small helper which allows us to get the
currently configured vector length using the RDVL instruction via either
a library call or stdout of a process and then uses this to both add
verification of enumerated vector lengths to our existing tests and also
add a new test program which exercises both the prctl() and sysfs
interfaces.

In preparation for the forthcomng support for the Scalable Matrix
Extension (SME) [1] which introduces a new vector length managed via a
very similar hardware interface the helper and new test program are
parameterised with the goal of allowing reuse for SME.

[1] https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/scalable-matrix-extension-armv9-a-architecture

v5:
 - Fix a potentially uninialized variable case.
 - Clarify an error message.
 - Add TODO.
v4:
 - Fix fscanf() format string handling to properly confirm the newline.
 - Pull fclose() out of stdio read helper.
 - Change style of child monitoring loop.
v3:
 - Add BTI landing pads to the asm helper functions.
 - Clean up pipes used to talk to children.
 - Remove another unneeded include.
 - Make functions in the main executable static.
 - Match the newline when parsing vector length from the child.
 - Factor out the fscanf() and fclose() from parsing integers from file
   descriptors.
 - getauxval() returns unsigned long.
v2:
 - Tweak log message on failure in sve-probe-vls.
 - Stylistic changes in vec-syscfg.
 - Flush stdout before forking in vec-syscfg.
 - Use EXIT_FAILURE.
 - Use fdopen() to get child output.
 - Replace a bunch of UNIX API usage with stdio.
 - Add a TODO list.
 - Verify that we're root before testing writes to /proc.

Mark Brown (4):
  kselftest/arm64: Provide a helper binary and "library" for SVE RDVL
  kselftest/arm64: Validate vector lengths are set in sve-probe-vls
  kselftest/arm64: Add tests for SVE vector configuration
  kselftest/arm64: Add a TODO list for floating point tests

 tools/testing/selftests/arm64/fp/.gitignore   |   2 +
 tools/testing/selftests/arm64/fp/Makefile     |  11 +-
 tools/testing/selftests/arm64/fp/TODO         |   4 +
 tools/testing/selftests/arm64/fp/rdvl-sve.c   |  14 +
 tools/testing/selftests/arm64/fp/rdvl.S       |  10 +
 tools/testing/selftests/arm64/fp/rdvl.h       |   8 +
 .../selftests/arm64/fp/sve-probe-vls.c        |   5 +
 tools/testing/selftests/arm64/fp/vec-syscfg.c | 593 ++++++++++++++++++
 8 files changed, 644 insertions(+), 3 deletions(-)
 create mode 100644 tools/testing/selftests/arm64/fp/TODO
 create mode 100644 tools/testing/selftests/arm64/fp/rdvl-sve.c
 create mode 100644 tools/testing/selftests/arm64/fp/rdvl.S
 create mode 100644 tools/testing/selftests/arm64/fp/rdvl.h
 create mode 100644 tools/testing/selftests/arm64/fp/vec-syscfg.c


base-commit: ff1176468d368232b684f75e82563369208bc371
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 1/4] kselftest/arm64: Provide a helper binary and "library" for SVE RDVL

[Mark Brown]

SVE provides an instruction RDVL which reports the currently configured
vector length. In order to validate that our vector length configuration
interfaces are working correctly without having to build the C code for
our test programs with SVE enabled provide a trivial assembly library
with a C callable function that executes RDVL. Since these interfaces
also control behaviour on exec*() provide a trivial wrapper program which
reports the currently configured vector length on stdout, tests can use
this to verify that behaviour on exec*() is as expected.

In preparation for providing similar helper functionality for SME, the
Scalable Matrix Extension, which allows separately configured vector
lengths to be read back both the assembler function and wrapper binary
have SVE included in their name.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
---
 tools/testing/selftests/arm64/fp/.gitignore |  1 +
 tools/testing/selftests/arm64/fp/Makefile   |  6 +++++-
 tools/testing/selftests/arm64/fp/rdvl-sve.c | 14 ++++++++++++++
 tools/testing/selftests/arm64/fp/rdvl.S     | 10 ++++++++++
 tools/testing/selftests/arm64/fp/rdvl.h     |  8 ++++++++
 5 files changed, 38 insertions(+), 1 deletion(-)
 create mode 100644 tools/testing/selftests/arm64/fp/rdvl-sve.c
 create mode 100644 tools/testing/selftests/arm64/fp/rdvl.S
 create mode 100644 tools/testing/selftests/arm64/fp/rdvl.h

diff --git a/tools/testing/selftests/arm64/fp/.gitignore b/tools/testing/selftests/arm64/fp/.gitignore
index d66f76d2a650..6b53a7b60fee 100644
--- a/tools/testing/selftests/arm64/fp/.gitignore
+++ b/tools/testing/selftests/arm64/fp/.gitignore
@@ -1,4 +1,5 @@
 fpsimd-test
+rdvl-sve
 sve-probe-vls
 sve-ptrace
 sve-test
diff --git a/tools/testing/selftests/arm64/fp/Makefile b/tools/testing/selftests/arm64/fp/Makefile
index a57009d3a0dc..ed62e7003b96 100644
--- a/tools/testing/selftests/arm64/fp/Makefile
+++ b/tools/testing/selftests/arm64/fp/Makefile
@@ -2,12 +2,16 @@
 
 CFLAGS += -I../../../../../usr/include/
 TEST_GEN_PROGS := sve-ptrace sve-probe-vls
-TEST_PROGS_EXTENDED := fpsimd-test fpsimd-stress sve-test sve-stress vlset
+TEST_PROGS_EXTENDED := fpsimd-test fpsimd-stress \
+	rdvl-sve \
+	sve-test sve-stress \
+	vlset
 
 all: $(TEST_GEN_PROGS) $(TEST_PROGS_EXTENDED)
 
 fpsimd-test: fpsimd-test.o
 	$(CC) -nostdlib $^ -o $@
+rdvl-sve: rdvl-sve.o rdvl.o
 sve-ptrace: sve-ptrace.o sve-ptrace-asm.o
 sve-probe-vls: sve-probe-vls.o
 sve-test: sve-test.o
diff --git a/tools/testing/selftests/arm64/fp/rdvl-sve.c b/tools/testing/selftests/arm64/fp/rdvl-sve.c
new file mode 100644
index 000000000000..7f8a13a18f5d
--- /dev/null
+++ b/tools/testing/selftests/arm64/fp/rdvl-sve.c
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <stdio.h>
+
+#include "rdvl.h"
+
+int main(void)
+{
+	int vl = rdvl_sve();
+
+	printf("%d\n", vl);
+
+	return 0;
+}
diff --git a/tools/testing/selftests/arm64/fp/rdvl.S b/tools/testing/selftests/arm64/fp/rdvl.S
new file mode 100644
index 000000000000..c916c1c9defd
--- /dev/null
+++ b/tools/testing/selftests/arm64/fp/rdvl.S
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2021 ARM Limited.
+
+.arch_extension sve
+
+.globl rdvl_sve
+rdvl_sve:
+	hint	34			// BTI C
+	rdvl	x0, #1
+	ret
diff --git a/tools/testing/selftests/arm64/fp/rdvl.h b/tools/testing/selftests/arm64/fp/rdvl.h
new file mode 100644
index 000000000000..7c9d953fc9e7
--- /dev/null
+++ b/tools/testing/selftests/arm64/fp/rdvl.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef RDVL_H
+#define RDVL_H
+
+int rdvl_sve(void);
+
+#endif
-- 
2.20.1

[PATCH v5 1/4] kselftest/arm64: Provide a helper binary and "library" for SVE RDVL

[Mark Brown]

SVE provides an instruction RDVL which reports the currently configured
vector length. In order to validate that our vector length configuration
interfaces are working correctly without having to build the C code for
our test programs with SVE enabled provide a trivial assembly library
with a C callable function that executes RDVL. Since these interfaces
also control behaviour on exec*() provide a trivial wrapper program which
reports the currently configured vector length on stdout, tests can use
this to verify that behaviour on exec*() is as expected.

In preparation for providing similar helper functionality for SME, the
Scalable Matrix Extension, which allows separately configured vector
lengths to be read back both the assembler function and wrapper binary
have SVE included in their name.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
---
 tools/testing/selftests/arm64/fp/.gitignore |  1 +
 tools/testing/selftests/arm64/fp/Makefile   |  6 +++++-
 tools/testing/selftests/arm64/fp/rdvl-sve.c | 14 ++++++++++++++
 tools/testing/selftests/arm64/fp/rdvl.S     | 10 ++++++++++
 tools/testing/selftests/arm64/fp/rdvl.h     |  8 ++++++++
 5 files changed, 38 insertions(+), 1 deletion(-)
 create mode 100644 tools/testing/selftests/arm64/fp/rdvl-sve.c
 create mode 100644 tools/testing/selftests/arm64/fp/rdvl.S
 create mode 100644 tools/testing/selftests/arm64/fp/rdvl.h

diff --git a/tools/testing/selftests/arm64/fp/.gitignore b/tools/testing/selftests/arm64/fp/.gitignore
index d66f76d2a650..6b53a7b60fee 100644
--- a/tools/testing/selftests/arm64/fp/.gitignore
+++ b/tools/testing/selftests/arm64/fp/.gitignore
@@ -1,4 +1,5 @@
 fpsimd-test
+rdvl-sve
 sve-probe-vls
 sve-ptrace
 sve-test
diff --git a/tools/testing/selftests/arm64/fp/Makefile b/tools/testing/selftests/arm64/fp/Makefile
index a57009d3a0dc..ed62e7003b96 100644
--- a/tools/testing/selftests/arm64/fp/Makefile
+++ b/tools/testing/selftests/arm64/fp/Makefile
@@ -2,12 +2,16 @@
 
 CFLAGS += -I../../../../../usr/include/
 TEST_GEN_PROGS := sve-ptrace sve-probe-vls
-TEST_PROGS_EXTENDED := fpsimd-test fpsimd-stress sve-test sve-stress vlset
+TEST_PROGS_EXTENDED := fpsimd-test fpsimd-stress \
+	rdvl-sve \
+	sve-test sve-stress \
+	vlset
 
 all: $(TEST_GEN_PROGS) $(TEST_PROGS_EXTENDED)
 
 fpsimd-test: fpsimd-test.o
 	$(CC) -nostdlib $^ -o $@
+rdvl-sve: rdvl-sve.o rdvl.o
 sve-ptrace: sve-ptrace.o sve-ptrace-asm.o
 sve-probe-vls: sve-probe-vls.o
 sve-test: sve-test.o
diff --git a/tools/testing/selftests/arm64/fp/rdvl-sve.c b/tools/testing/selftests/arm64/fp/rdvl-sve.c
new file mode 100644
index 000000000000..7f8a13a18f5d
--- /dev/null
+++ b/tools/testing/selftests/arm64/fp/rdvl-sve.c
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <stdio.h>
+
+#include "rdvl.h"
+
+int main(void)
+{
+	int vl = rdvl_sve();
+
+	printf("%d\n", vl);
+
+	return 0;
+}
diff --git a/tools/testing/selftests/arm64/fp/rdvl.S b/tools/testing/selftests/arm64/fp/rdvl.S
new file mode 100644
index 000000000000..c916c1c9defd
--- /dev/null
+++ b/tools/testing/selftests/arm64/fp/rdvl.S
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2021 ARM Limited.
+
+.arch_extension sve
+
+.globl rdvl_sve
+rdvl_sve:
+	hint	34			// BTI C
+	rdvl	x0, #1
+	ret
diff --git a/tools/testing/selftests/arm64/fp/rdvl.h b/tools/testing/selftests/arm64/fp/rdvl.h
new file mode 100644
index 000000000000..7c9d953fc9e7
--- /dev/null
+++ b/tools/testing/selftests/arm64/fp/rdvl.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef RDVL_H
+#define RDVL_H
+
+int rdvl_sve(void);
+
+#endif
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 2/4] kselftest/arm64: Validate vector lengths are set in sve-probe-vls

[Mark Brown]

Currently sve-probe-vls does not verify that the vector lengths reported
by the prctl() interface are actually what is reported by the architecture,
use the rdvl_sve() helper to validate this.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
---
 tools/testing/selftests/arm64/fp/Makefile        | 2 +-
 tools/testing/selftests/arm64/fp/sve-probe-vls.c | 5 +++++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/arm64/fp/Makefile b/tools/testing/selftests/arm64/fp/Makefile
index ed62e7003b96..fa3a0167db2d 100644
--- a/tools/testing/selftests/arm64/fp/Makefile
+++ b/tools/testing/selftests/arm64/fp/Makefile
@@ -13,7 +13,7 @@ fpsimd-test: fpsimd-test.o
 	$(CC) -nostdlib $^ -o $@
 rdvl-sve: rdvl-sve.o rdvl.o
 sve-ptrace: sve-ptrace.o sve-ptrace-asm.o
-sve-probe-vls: sve-probe-vls.o
+sve-probe-vls: sve-probe-vls.o rdvl.o
 sve-test: sve-test.o
 	$(CC) -nostdlib $^ -o $@
 vlset: vlset.o
diff --git a/tools/testing/selftests/arm64/fp/sve-probe-vls.c b/tools/testing/selftests/arm64/fp/sve-probe-vls.c
index 76e138525d55..a24eca7a4ecb 100644
--- a/tools/testing/selftests/arm64/fp/sve-probe-vls.c
+++ b/tools/testing/selftests/arm64/fp/sve-probe-vls.c
@@ -13,6 +13,7 @@
 #include <asm/sigcontext.h>
 
 #include "../../kselftest.h"
+#include "rdvl.h"
 
 int main(int argc, char **argv)
 {
@@ -38,6 +39,10 @@ int main(int argc, char **argv)
 
 		vl &= PR_SVE_VL_LEN_MASK;
 
+		if (rdvl_sve() != vl)
+			ksft_exit_fail_msg("PR_SVE_SET_VL reports %d, RDVL %d\n",
+					   vl, rdvl_sve());
+
 		if (!sve_vl_valid(vl))
 			ksft_exit_fail_msg("VL %d invalid\n", vl);
 		vq = sve_vq_from_vl(vl);
-- 
2.20.1

[PATCH v5 2/4] kselftest/arm64: Validate vector lengths are set in sve-probe-vls

[Mark Brown]

Currently sve-probe-vls does not verify that the vector lengths reported
by the prctl() interface are actually what is reported by the architecture,
use the rdvl_sve() helper to validate this.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
---
 tools/testing/selftests/arm64/fp/Makefile        | 2 +-
 tools/testing/selftests/arm64/fp/sve-probe-vls.c | 5 +++++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/arm64/fp/Makefile b/tools/testing/selftests/arm64/fp/Makefile
index ed62e7003b96..fa3a0167db2d 100644
--- a/tools/testing/selftests/arm64/fp/Makefile
+++ b/tools/testing/selftests/arm64/fp/Makefile
@@ -13,7 +13,7 @@ fpsimd-test: fpsimd-test.o
 	$(CC) -nostdlib $^ -o $@
 rdvl-sve: rdvl-sve.o rdvl.o
 sve-ptrace: sve-ptrace.o sve-ptrace-asm.o
-sve-probe-vls: sve-probe-vls.o
+sve-probe-vls: sve-probe-vls.o rdvl.o
 sve-test: sve-test.o
 	$(CC) -nostdlib $^ -o $@
 vlset: vlset.o
diff --git a/tools/testing/selftests/arm64/fp/sve-probe-vls.c b/tools/testing/selftests/arm64/fp/sve-probe-vls.c
index 76e138525d55..a24eca7a4ecb 100644
--- a/tools/testing/selftests/arm64/fp/sve-probe-vls.c
+++ b/tools/testing/selftests/arm64/fp/sve-probe-vls.c
@@ -13,6 +13,7 @@
 #include <asm/sigcontext.h>
 
 #include "../../kselftest.h"
+#include "rdvl.h"
 
 int main(int argc, char **argv)
 {
@@ -38,6 +39,10 @@ int main(int argc, char **argv)
 
 		vl &= PR_SVE_VL_LEN_MASK;
 
+		if (rdvl_sve() != vl)
+			ksft_exit_fail_msg("PR_SVE_SET_VL reports %d, RDVL %d\n",
+					   vl, rdvl_sve());
+
 		if (!sve_vl_valid(vl))
 			ksft_exit_fail_msg("VL %d invalid\n", vl);
 		vq = sve_vq_from_vl(vl);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 3/4] kselftest/arm64: Add tests for SVE vector configuration

[Mark Brown]

We provide interfaces for configuring the SVE vector length seen by
processes using prctl and also via /proc for configuring the default
values. Provide tests that exercise all these interfaces and verify that
they take effect as expected, though at present no test fully enumerates
all the possible vector lengths.

A subset of this is already tested via sve-probe-vls but the /proc
interfaces are not currently covered at all.

In preparation for the forthcoming support for SME, the Scalable Matrix
Extension, which has separately but similarly configured vector lengths
which we expect to offer similar userspace interfaces for, all the actual
files and prctls used are parameterised and we don't validate that the
architectural minimum vector length is the minimum we see.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
---
 tools/testing/selftests/arm64/fp/.gitignore   |   1 +
 tools/testing/selftests/arm64/fp/Makefile     |   3 +-
 tools/testing/selftests/arm64/fp/vec-syscfg.c | 593 ++++++++++++++++++
 3 files changed, 596 insertions(+), 1 deletion(-)
 create mode 100644 tools/testing/selftests/arm64/fp/vec-syscfg.c

diff --git a/tools/testing/selftests/arm64/fp/.gitignore b/tools/testing/selftests/arm64/fp/.gitignore
index 6b53a7b60fee..b67395903b9b 100644
--- a/tools/testing/selftests/arm64/fp/.gitignore
+++ b/tools/testing/selftests/arm64/fp/.gitignore
@@ -3,4 +3,5 @@ rdvl-sve
 sve-probe-vls
 sve-ptrace
 sve-test
+vec-syscfg
 vlset
diff --git a/tools/testing/selftests/arm64/fp/Makefile b/tools/testing/selftests/arm64/fp/Makefile
index fa3a0167db2d..f2abdd6ba12e 100644
--- a/tools/testing/selftests/arm64/fp/Makefile
+++ b/tools/testing/selftests/arm64/fp/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 
 CFLAGS += -I../../../../../usr/include/
-TEST_GEN_PROGS := sve-ptrace sve-probe-vls
+TEST_GEN_PROGS := sve-ptrace sve-probe-vls vec-syscfg
 TEST_PROGS_EXTENDED := fpsimd-test fpsimd-stress \
 	rdvl-sve \
 	sve-test sve-stress \
@@ -16,6 +16,7 @@ sve-ptrace: sve-ptrace.o sve-ptrace-asm.o
 sve-probe-vls: sve-probe-vls.o rdvl.o
 sve-test: sve-test.o
 	$(CC) -nostdlib $^ -o $@
+vec-syscfg: vec-syscfg.o rdvl.o
 vlset: vlset.o
 
 include ../../lib.mk
diff --git a/tools/testing/selftests/arm64/fp/vec-syscfg.c b/tools/testing/selftests/arm64/fp/vec-syscfg.c
new file mode 100644
index 000000000000..c02071dcb563
--- /dev/null
+++ b/tools/testing/selftests/arm64/fp/vec-syscfg.c
@@ -0,0 +1,593 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 ARM Limited.
+ * Original author: Mark Brown <broonie@kernel.org>
+ */
+#include <assert.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/auxv.h>
+#include <sys/prctl.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <asm/sigcontext.h>
+#include <asm/hwcap.h>
+
+#include "../../kselftest.h"
+#include "rdvl.h"
+
+#define ARRAY_SIZE(a) (sizeof(a) / sizeof(a[0]))
+
+#define ARCH_MIN_VL SVE_VL_MIN
+
+struct vec_data {
+	const char *name;
+	unsigned long hwcap_type;
+	unsigned long hwcap;
+	const char *rdvl_binary;
+	int (*rdvl)(void);
+
+	int prctl_get;
+	int prctl_set;
+	const char *default_vl_file;
+
+	int default_vl;
+	int min_vl;
+	int max_vl;
+};
+
+
+static struct vec_data vec_data[] = {
+	{
+		.name = "SVE",
+		.hwcap_type = AT_HWCAP,
+		.hwcap = HWCAP_SVE,
+		.rdvl = rdvl_sve,
+		.rdvl_binary = "./rdvl-sve",
+		.prctl_get = PR_SVE_GET_VL,
+		.prctl_set = PR_SVE_SET_VL,
+		.default_vl_file = "/proc/sys/abi/sve_default_vector_length",
+	},
+};
+
+static int stdio_read_integer(FILE *f, const char *what, int *val)
+{
+	int n = 0;
+	int ret;
+
+	ret = fscanf(f, "%d%*1[\n]%n", val, &n);
+	if (ret < 1 || n < 1) {
+		ksft_print_msg("failed to parse integer from %s\n", what);
+		return -1;
+	}
+
+	return 0;
+}
+
+/* Start a new process and return the vector length it sees */
+static int get_child_rdvl(struct vec_data *data)
+{
+	FILE *out;
+	int pipefd[2];
+	pid_t pid, child;
+	int read_vl, ret;
+
+	ret = pipe(pipefd);
+	if (ret == -1) {
+		ksft_print_msg("pipe() failed: %d (%s)\n",
+			       errno, strerror(errno));
+		return -1;
+	}
+
+	fflush(stdout);
+
+	child = fork();
+	if (child == -1) {
+		ksft_print_msg("fork() failed: %d (%s)\n",
+			       errno, strerror(errno));
+		close(pipefd[0]);
+		close(pipefd[1]);
+		return -1;
+	}
+
+	/* Child: put vector length on the pipe */
+	if (child == 0) {
+		/*
+		 * Replace stdout with the pipe, errors to stderr from
+		 * here as kselftest prints to stdout.
+		 */
+		ret = dup2(pipefd[1], 1);
+		if (ret == -1) {
+			fprintf(stderr, "dup2() %d\n", errno);
+			exit(EXIT_FAILURE);
+		}
+
+		/* exec() a new binary which puts the VL on stdout */
+		ret = execl(data->rdvl_binary, data->rdvl_binary, NULL);
+		fprintf(stderr, "execl(%s) failed: %d\n",
+			data->rdvl_binary, errno, strerror(errno));
+
+		exit(EXIT_FAILURE);
+	}
+
+	close(pipefd[1]);
+
+	/* Parent; wait for the exit status from the child & verify it */
+	do {
+		pid = wait(&ret);
+		if (pid == -1) {
+			ksft_print_msg("wait() failed: %d (%s)\n",
+				       errno, strerror(errno));
+			close(pipefd[0]);
+			return -1;
+		}
+	} while (pid != child);
+
+	assert(pid == child);
+
+	if (!WIFEXITED(ret)) {
+		ksft_print_msg("child exited abnormally\n");
+		close(pipefd[0]);
+		return -1;
+	}
+
+	if (WEXITSTATUS(ret) != 0) {
+		ksft_print_msg("child returned error %d\n",
+			       WEXITSTATUS(ret));
+		close(pipefd[0]);
+		return -1;
+	}
+
+	out = fdopen(pipefd[0], "r");
+	if (!out) {
+		ksft_print_msg("failed to open child stdout\n");
+		close(pipefd[0]);
+		return -1;
+	}
+
+	ret = stdio_read_integer(out, "child", &read_vl);
+	fclose(out);
+	if (ret != 0)
+		return ret;
+
+	return read_vl;
+}
+
+static int file_read_integer(const char *name, int *val)
+{
+	FILE *f;
+	int ret;
+
+	f = fopen(name, "r");
+	if (!f) {
+		ksft_test_result_fail("Unable to open %s: %d (%s)\n",
+				      name, errno,
+				      strerror(errno));
+		return -1;
+	}
+
+	ret = stdio_read_integer(f, name, val);
+	fclose(f);
+
+	return ret;
+}
+
+static int file_write_integer(const char *name, int val)
+{
+	FILE *f;
+	int ret;
+
+	f = fopen(name, "w");
+	if (!f) {
+		ksft_test_result_fail("Unable to open %s: %d (%s)\n",
+				      name, errno,
+				      strerror(errno));
+		return -1;
+	}
+
+	fprintf(f, "%d", val);
+	fclose(f);
+	if (ret < 0) {
+		ksft_test_result_fail("Error writing %d to %s\n",
+				      val, name);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Verify that we can read the default VL via proc, checking that it
+ * is set in a freshly spawned child.
+ */
+static void proc_read_default(struct vec_data *data)
+{
+	int default_vl, child_vl, ret;
+
+	ret = file_read_integer(data->default_vl_file, &default_vl);
+	if (ret != 0)
+		return;
+
+	/* Is this the actual default seen by new processes? */
+	child_vl = get_child_rdvl(data);
+	if (child_vl != default_vl) {
+		ksft_test_result_fail("%s is %d but child VL is %d\n",
+				      data->default_vl_file,
+				      default_vl, child_vl);
+		return;
+	}
+
+	ksft_test_result_pass("%s default vector length %d\n", data->name,
+			      default_vl);
+	data->default_vl = default_vl;
+}
+
+/* Verify that we can write a minimum value and have it take effect */
+static void proc_write_min(struct vec_data *data)
+{
+	int ret, new_default, child_vl;
+
+	if (geteuid() != 0) {
+		ksft_test_result_skip("Need to be root to write to /proc\n");
+		return;
+	}
+
+	ret = file_write_integer(data->default_vl_file, ARCH_MIN_VL);
+	if (ret != 0)
+		return;
+
+	/* What was the new value? */
+	ret = file_read_integer(data->default_vl_file, &new_default);
+	if (ret != 0)
+		return;
+
+	/* Did it take effect in a new process? */
+	child_vl = get_child_rdvl(data);
+	if (child_vl != new_default) {
+		ksft_test_result_fail("%s is %d but child VL is %d\n",
+				      data->default_vl_file,
+				      new_default, child_vl);
+		return;
+	}
+
+	ksft_test_result_pass("%s minimum vector length %d\n", data->name,
+			      new_default);
+	data->min_vl = new_default;
+
+	file_write_integer(data->default_vl_file, data->default_vl);
+}
+
+/* Verify that we can write a maximum value and have it take effect */
+static void proc_write_max(struct vec_data *data)
+{
+	int ret, new_default, child_vl;
+
+	if (geteuid() != 0) {
+		ksft_test_result_skip("Need to be root to write to /proc\n");
+		return;
+	}
+
+	/* -1 is accepted by the /proc interface as the maximum VL */
+	ret = file_write_integer(data->default_vl_file, -1);
+	if (ret != 0)
+		return;
+
+	/* What was the new value? */
+	ret = file_read_integer(data->default_vl_file, &new_default);
+	if (ret != 0)
+		return;
+
+	/* Did it take effect in a new process? */
+	child_vl = get_child_rdvl(data);
+	if (child_vl != new_default) {
+		ksft_test_result_fail("%s is %d but child VL is %d\n",
+				      data->default_vl_file,
+				      new_default, child_vl);
+		return;
+	}
+
+	ksft_test_result_pass("%s maximum vector length %d\n", data->name,
+			      new_default);
+	data->max_vl = new_default;
+
+	file_write_integer(data->default_vl_file, data->default_vl);
+}
+
+/* Can we read back a VL from prctl? */
+static void prctl_get(struct vec_data *data)
+{
+	int ret;
+
+	ret = prctl(data->prctl_get);
+	if (ret == -1) {
+		ksft_test_result_fail("%s prctl() read failed: %d (%s)\n",
+				      data->name, errno, strerror(errno));
+		return;
+	}
+
+	/* Mask out any flags */
+	ret &= PR_SVE_VL_LEN_MASK;
+
+	/* Is that what we can read back directly? */
+	if (ret == data->rdvl())
+		ksft_test_result_pass("%s current VL is %d\n",
+				      data->name, ret);
+	else
+		ksft_test_result_fail("%s prctl() VL %d but RDVL is %d\n",
+				      data->name, ret, data->rdvl());
+}
+
+/* Does the prctl let us set the VL we already have? */
+static void prctl_set_same(struct vec_data *data)
+{
+	int cur_vl = data->rdvl();
+	int ret;
+
+	ret = prctl(data->prctl_set, cur_vl);
+	if (ret < 0) {
+		ksft_test_result_fail("%s prctl set failed: %d (%s)\n",
+				      data->name, errno, strerror(errno));
+		return;
+	}
+
+	if (cur_vl != data->rdvl())
+		ksft_test_result_pass("%s current VL is %d\n",
+				      data->name, ret);
+	else
+		ksft_test_result_fail("%s prctl() VL %d but RDVL is %d\n",
+				      data->name, ret, data->rdvl());
+}
+
+/* Can we set a new VL for this process? */
+static void prctl_set(struct vec_data *data)
+{
+	int ret;
+
+	if (data->min_vl == data->max_vl) {
+		ksft_test_result_skip("%s only one VL supported\n",
+				      data->name);
+		return;
+	}
+
+	/* Try to set the minimum VL */
+	ret = prctl(data->prctl_set, data->min_vl);
+	if (ret < 0) {
+		ksft_test_result_fail("%s prctl set failed for %d: %d (%s)\n",
+				      data->name, data->min_vl,
+				      errno, strerror(errno));
+		return;
+	}
+
+	if ((ret & PR_SVE_VL_LEN_MASK) != data->min_vl) {
+		ksft_test_result_fail("%s prctl set %d but return value is %d\n",
+				      data->name, data->min_vl, data->rdvl());
+		return;
+	}
+
+	if (data->rdvl() != data->min_vl) {
+		ksft_test_result_fail("%s set %d but RDVL is %d\n",
+				      data->name, data->min_vl, data->rdvl());
+		return;
+	}
+
+	/* Try to set the maximum VL */
+	ret = prctl(data->prctl_set, data->max_vl);
+	if (ret < 0) {
+		ksft_test_result_fail("%s prctl set failed for %d: %d (%s)\n",
+				      data->name, data->max_vl,
+				      errno, strerror(errno));
+		return;
+	}
+
+	if ((ret & PR_SVE_VL_LEN_MASK) != data->max_vl) {
+		ksft_test_result_fail("%s prctl() set %d but return value is %d\n",
+				      data->name, data->max_vl, data->rdvl());
+		return;
+	}
+
+	/* The _INHERIT flag should not be present when we read the VL */
+	ret = prctl(data->prctl_get);
+	if (ret == -1) {
+		ksft_test_result_fail("%s prctl() read failed: %d (%s)\n",
+				      data->name, errno, strerror(errno));
+		return;
+	}
+
+	if (ret & PR_SVE_VL_INHERIT) {
+		ksft_test_result_fail("%s prctl() reports _INHERIT\n",
+				      data->name);
+		return;
+	}
+
+	ksft_test_result_pass("%s prctl() set min/max\n", data->name);
+}
+
+/* If we didn't request it a new VL shouldn't affect the child */
+static void prctl_set_no_child(struct vec_data *data)
+{
+	int ret, child_vl;
+
+	if (data->min_vl == data->max_vl) {
+		ksft_test_result_skip("%s only one VL supported\n",
+				      data->name);
+		return;
+	}
+
+	ret = prctl(data->prctl_set, data->min_vl);
+	if (ret < 0) {
+		ksft_test_result_fail("%s prctl set failed for %d: %d (%s)\n",
+				      data->name, data->min_vl,
+				      errno, strerror(errno));
+		return;
+	}
+
+	/* Ensure the default VL is different */
+	ret = file_write_integer(data->default_vl_file, data->max_vl);
+	if (ret != 0)
+		return;
+
+	/* Check that the child has the default we just set */
+	child_vl = get_child_rdvl(data);
+	if (child_vl != data->max_vl) {
+		ksft_test_result_fail("%s is %d but child VL is %d\n",
+				      data->default_vl_file,
+				      data->max_vl, child_vl);
+		return;
+	}
+
+	ksft_test_result_pass("%s vector length used default\n", data->name);
+
+	file_write_integer(data->default_vl_file, data->default_vl);
+}
+
+/* If we didn't request it a new VL shouldn't affect the child */
+static void prctl_set_for_child(struct vec_data *data)
+{
+	int ret, child_vl;
+
+	if (data->min_vl == data->max_vl) {
+		ksft_test_result_skip("%s only one VL supported\n",
+				      data->name);
+		return;
+	}
+
+	ret = prctl(data->prctl_set, data->min_vl | PR_SVE_VL_INHERIT);
+	if (ret < 0) {
+		ksft_test_result_fail("%s prctl set failed for %d: %d (%s)\n",
+				      data->name, data->min_vl,
+				      errno, strerror(errno));
+		return;
+	}
+
+	/* The _INHERIT flag should be present when we read the VL */
+	ret = prctl(data->prctl_get);
+	if (ret == -1) {
+		ksft_test_result_fail("%s prctl() read failed: %d (%s)\n",
+				      data->name, errno, strerror(errno));
+		return;
+	}
+	if (!(ret & PR_SVE_VL_INHERIT)) {
+		ksft_test_result_fail("%s prctl() does not report _INHERIT\n",
+				      data->name);
+		return;
+	}
+
+	/* Ensure the default VL is different */
+	ret = file_write_integer(data->default_vl_file, data->max_vl);
+	if (ret != 0)
+		return;
+
+	/* Check that the child inherited our VL */
+	child_vl = get_child_rdvl(data);
+	if (child_vl != data->min_vl) {
+		ksft_test_result_fail("%s is %d but child VL is %d\n",
+				      data->default_vl_file,
+				      data->min_vl, child_vl);
+		return;
+	}
+
+	ksft_test_result_pass("%s vector length was inherited\n", data->name);
+
+	file_write_integer(data->default_vl_file, data->default_vl);
+}
+
+/* _ONEXEC takes effect only in the child process */
+static void prctl_set_onexec(struct vec_data *data)
+{
+	int ret, child_vl;
+
+	if (data->min_vl == data->max_vl) {
+		ksft_test_result_skip("%s only one VL supported\n",
+				      data->name);
+		return;
+	}
+
+	/* Set a known value for the default and our current VL */
+	ret = file_write_integer(data->default_vl_file, data->max_vl);
+	if (ret != 0)
+		return;
+
+	ret = prctl(data->prctl_set, data->max_vl);
+	if (ret < 0) {
+		ksft_test_result_fail("%s prctl set failed for %d: %d (%s)\n",
+				      data->name, data->min_vl,
+				      errno, strerror(errno));
+		return;
+	}
+
+	/* Set a different value for the child to have on exec */
+	ret = prctl(data->prctl_set, data->min_vl | PR_SVE_SET_VL_ONEXEC);
+	if (ret < 0) {
+		ksft_test_result_fail("%s prctl set failed for %d: %d (%s)\n",
+				      data->name, data->min_vl,
+				      errno, strerror(errno));
+		return;
+	}
+
+	/* Our current VL should stay the same */
+	if (data->rdvl() != data->max_vl) {
+		ksft_test_result_fail("%s VL changed by _ONEXEC prctl()\n",
+				      data->name);
+		return;
+	}
+
+	/* Check that the child inherited our VL */
+	child_vl = get_child_rdvl(data);
+	if (child_vl != data->min_vl) {
+		ksft_test_result_fail("Set %d _ONEXEC but child VL is %d\n",
+				      data->min_vl, child_vl);
+		return;
+	}
+
+	ksft_test_result_pass("%s vector length set on exec\n", data->name);
+
+	file_write_integer(data->default_vl_file, data->default_vl);
+}
+
+typedef void (*test_type)(struct vec_data *);
+
+static const test_type tests[] = {
+	/*
+	 * The default/min/max tests must be first and in this order
+	 * to provide data for other tests.
+	 */
+	proc_read_default,
+	proc_write_min,
+	proc_write_max,
+
+	prctl_get,
+	prctl_set,
+	prctl_set_no_child,
+	prctl_set_for_child,
+	prctl_set_onexec,
+};
+
+int main(void)
+{
+	int i, j;
+
+	ksft_print_header();
+	ksft_set_plan(ARRAY_SIZE(tests) * ARRAY_SIZE(vec_data));
+
+	for (i = 0; i < ARRAY_SIZE(vec_data); i++) {
+		struct vec_data *data = &vec_data[i];
+		unsigned long supported;
+
+		supported = getauxval(data->hwcap_type) & data->hwcap;
+
+		for (j = 0; j < ARRAY_SIZE(tests); j++) {
+			if (supported)
+				tests[j](data);
+			else
+				ksft_test_result_skip("%s not supported\n",
+						      data->name);
+		}
+	}
+
+	ksft_exit_pass();
+}
-- 
2.20.1

[PATCH v5 3/4] kselftest/arm64: Add tests for SVE vector configuration

[Mark Brown]

We provide interfaces for configuring the SVE vector length seen by
processes using prctl and also via /proc for configuring the default
values. Provide tests that exercise all these interfaces and verify that
they take effect as expected, though at present no test fully enumerates
all the possible vector lengths.

A subset of this is already tested via sve-probe-vls but the /proc
interfaces are not currently covered at all.

In preparation for the forthcoming support for SME, the Scalable Matrix
Extension, which has separately but similarly configured vector lengths
which we expect to offer similar userspace interfaces for, all the actual
files and prctls used are parameterised and we don't validate that the
architectural minimum vector length is the minimum we see.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
---
 tools/testing/selftests/arm64/fp/.gitignore   |   1 +
 tools/testing/selftests/arm64/fp/Makefile     |   3 +-
 tools/testing/selftests/arm64/fp/vec-syscfg.c | 593 ++++++++++++++++++
 3 files changed, 596 insertions(+), 1 deletion(-)
 create mode 100644 tools/testing/selftests/arm64/fp/vec-syscfg.c

diff --git a/tools/testing/selftests/arm64/fp/.gitignore b/tools/testing/selftests/arm64/fp/.gitignore
index 6b53a7b60fee..b67395903b9b 100644
--- a/tools/testing/selftests/arm64/fp/.gitignore
+++ b/tools/testing/selftests/arm64/fp/.gitignore
@@ -3,4 +3,5 @@ rdvl-sve
 sve-probe-vls
 sve-ptrace
 sve-test
+vec-syscfg
 vlset
diff --git a/tools/testing/selftests/arm64/fp/Makefile b/tools/testing/selftests/arm64/fp/Makefile
index fa3a0167db2d..f2abdd6ba12e 100644
--- a/tools/testing/selftests/arm64/fp/Makefile
+++ b/tools/testing/selftests/arm64/fp/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 
 CFLAGS += -I../../../../../usr/include/
-TEST_GEN_PROGS := sve-ptrace sve-probe-vls
+TEST_GEN_PROGS := sve-ptrace sve-probe-vls vec-syscfg
 TEST_PROGS_EXTENDED := fpsimd-test fpsimd-stress \
 	rdvl-sve \
 	sve-test sve-stress \
@@ -16,6 +16,7 @@ sve-ptrace: sve-ptrace.o sve-ptrace-asm.o
 sve-probe-vls: sve-probe-vls.o rdvl.o
 sve-test: sve-test.o
 	$(CC) -nostdlib $^ -o $@
+vec-syscfg: vec-syscfg.o rdvl.o
 vlset: vlset.o
 
 include ../../lib.mk
diff --git a/tools/testing/selftests/arm64/fp/vec-syscfg.c b/tools/testing/selftests/arm64/fp/vec-syscfg.c
new file mode 100644
index 000000000000..c02071dcb563
--- /dev/null
+++ b/tools/testing/selftests/arm64/fp/vec-syscfg.c
@@ -0,0 +1,593 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 ARM Limited.
+ * Original author: Mark Brown <broonie@kernel.org>
+ */
+#include <assert.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/auxv.h>
+#include <sys/prctl.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <asm/sigcontext.h>
+#include <asm/hwcap.h>
+
+#include "../../kselftest.h"
+#include "rdvl.h"
+
+#define ARRAY_SIZE(a) (sizeof(a) / sizeof(a[0]))
+
+#define ARCH_MIN_VL SVE_VL_MIN
+
+struct vec_data {
+	const char *name;
+	unsigned long hwcap_type;
+	unsigned long hwcap;
+	const char *rdvl_binary;
+	int (*rdvl)(void);
+
+	int prctl_get;
+	int prctl_set;
+	const char *default_vl_file;
+
+	int default_vl;
+	int min_vl;
+	int max_vl;
+};
+
+
+static struct vec_data vec_data[] = {
+	{
+		.name = "SVE",
+		.hwcap_type = AT_HWCAP,
+		.hwcap = HWCAP_SVE,
+		.rdvl = rdvl_sve,
+		.rdvl_binary = "./rdvl-sve",
+		.prctl_get = PR_SVE_GET_VL,
+		.prctl_set = PR_SVE_SET_VL,
+		.default_vl_file = "/proc/sys/abi/sve_default_vector_length",
+	},
+};
+
+static int stdio_read_integer(FILE *f, const char *what, int *val)
+{
+	int n = 0;
+	int ret;
+
+	ret = fscanf(f, "%d%*1[\n]%n", val, &n);
+	if (ret < 1 || n < 1) {
+		ksft_print_msg("failed to parse integer from %s\n", what);
+		return -1;
+	}
+
+	return 0;
+}
+
+/* Start a new process and return the vector length it sees */
+static int get_child_rdvl(struct vec_data *data)
+{
+	FILE *out;
+	int pipefd[2];
+	pid_t pid, child;
+	int read_vl, ret;
+
+	ret = pipe(pipefd);
+	if (ret == -1) {
+		ksft_print_msg("pipe() failed: %d (%s)\n",
+			       errno, strerror(errno));
+		return -1;
+	}
+
+	fflush(stdout);
+
+	child = fork();
+	if (child == -1) {
+		ksft_print_msg("fork() failed: %d (%s)\n",
+			       errno, strerror(errno));
+		close(pipefd[0]);
+		close(pipefd[1]);
+		return -1;
+	}
+
+	/* Child: put vector length on the pipe */
+	if (child == 0) {
+		/*
+		 * Replace stdout with the pipe, errors to stderr from
+		 * here as kselftest prints to stdout.
+		 */
+		ret = dup2(pipefd[1], 1);
+		if (ret == -1) {
+			fprintf(stderr, "dup2() %d\n", errno);
+			exit(EXIT_FAILURE);
+		}
+
+		/* exec() a new binary which puts the VL on stdout */
+		ret = execl(data->rdvl_binary, data->rdvl_binary, NULL);
+		fprintf(stderr, "execl(%s) failed: %d\n",
+			data->rdvl_binary, errno, strerror(errno));
+
+		exit(EXIT_FAILURE);
+	}
+
+	close(pipefd[1]);
+
+	/* Parent; wait for the exit status from the child & verify it */
+	do {
+		pid = wait(&ret);
+		if (pid == -1) {
+			ksft_print_msg("wait() failed: %d (%s)\n",
+				       errno, strerror(errno));
+			close(pipefd[0]);
+			return -1;
+		}
+	} while (pid != child);
+
+	assert(pid == child);
+
+	if (!WIFEXITED(ret)) {
+		ksft_print_msg("child exited abnormally\n");
+		close(pipefd[0]);
+		return -1;
+	}
+
+	if (WEXITSTATUS(ret) != 0) {
+		ksft_print_msg("child returned error %d\n",
+			       WEXITSTATUS(ret));
+		close(pipefd[0]);
+		return -1;
+	}
+
+	out = fdopen(pipefd[0], "r");
+	if (!out) {
+		ksft_print_msg("failed to open child stdout\n");
+		close(pipefd[0]);
+		return -1;
+	}
+
+	ret = stdio_read_integer(out, "child", &read_vl);
+	fclose(out);
+	if (ret != 0)
+		return ret;
+
+	return read_vl;
+}
+
+static int file_read_integer(const char *name, int *val)
+{
+	FILE *f;
+	int ret;
+
+	f = fopen(name, "r");
+	if (!f) {
+		ksft_test_result_fail("Unable to open %s: %d (%s)\n",
+				      name, errno,
+				      strerror(errno));
+		return -1;
+	}
+
+	ret = stdio_read_integer(f, name, val);
+	fclose(f);
+
+	return ret;
+}
+
+static int file_write_integer(const char *name, int val)
+{
+	FILE *f;
+	int ret;
+
+	f = fopen(name, "w");
+	if (!f) {
+		ksft_test_result_fail("Unable to open %s: %d (%s)\n",
+				      name, errno,
+				      strerror(errno));
+		return -1;
+	}
+
+	fprintf(f, "%d", val);
+	fclose(f);
+	if (ret < 0) {
+		ksft_test_result_fail("Error writing %d to %s\n",
+				      val, name);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Verify that we can read the default VL via proc, checking that it
+ * is set in a freshly spawned child.
+ */
+static void proc_read_default(struct vec_data *data)
+{
+	int default_vl, child_vl, ret;
+
+	ret = file_read_integer(data->default_vl_file, &default_vl);
+	if (ret != 0)
+		return;
+
+	/* Is this the actual default seen by new processes? */
+	child_vl = get_child_rdvl(data);
+	if (child_vl != default_vl) {
+		ksft_test_result_fail("%s is %d but child VL is %d\n",
+				      data->default_vl_file,
+				      default_vl, child_vl);
+		return;
+	}
+
+	ksft_test_result_pass("%s default vector length %d\n", data->name,
+			      default_vl);
+	data->default_vl = default_vl;
+}
+
+/* Verify that we can write a minimum value and have it take effect */
+static void proc_write_min(struct vec_data *data)
+{
+	int ret, new_default, child_vl;
+
+	if (geteuid() != 0) {
+		ksft_test_result_skip("Need to be root to write to /proc\n");
+		return;
+	}
+
+	ret = file_write_integer(data->default_vl_file, ARCH_MIN_VL);
+	if (ret != 0)
+		return;
+
+	/* What was the new value? */
+	ret = file_read_integer(data->default_vl_file, &new_default);
+	if (ret != 0)
+		return;
+
+	/* Did it take effect in a new process? */
+	child_vl = get_child_rdvl(data);
+	if (child_vl != new_default) {
+		ksft_test_result_fail("%s is %d but child VL is %d\n",
+				      data->default_vl_file,
+				      new_default, child_vl);
+		return;
+	}
+
+	ksft_test_result_pass("%s minimum vector length %d\n", data->name,
+			      new_default);
+	data->min_vl = new_default;
+
+	file_write_integer(data->default_vl_file, data->default_vl);
+}
+
+/* Verify that we can write a maximum value and have it take effect */
+static void proc_write_max(struct vec_data *data)
+{
+	int ret, new_default, child_vl;
+
+	if (geteuid() != 0) {
+		ksft_test_result_skip("Need to be root to write to /proc\n");
+		return;
+	}
+
+	/* -1 is accepted by the /proc interface as the maximum VL */
+	ret = file_write_integer(data->default_vl_file, -1);
+	if (ret != 0)
+		return;
+
+	/* What was the new value? */
+	ret = file_read_integer(data->default_vl_file, &new_default);
+	if (ret != 0)
+		return;
+
+	/* Did it take effect in a new process? */
+	child_vl = get_child_rdvl(data);
+	if (child_vl != new_default) {
+		ksft_test_result_fail("%s is %d but child VL is %d\n",
+				      data->default_vl_file,
+				      new_default, child_vl);
+		return;
+	}
+
+	ksft_test_result_pass("%s maximum vector length %d\n", data->name,
+			      new_default);
+	data->max_vl = new_default;
+
+	file_write_integer(data->default_vl_file, data->default_vl);
+}
+
+/* Can we read back a VL from prctl? */
+static void prctl_get(struct vec_data *data)
+{
+	int ret;
+
+	ret = prctl(data->prctl_get);
+	if (ret == -1) {
+		ksft_test_result_fail("%s prctl() read failed: %d (%s)\n",
+				      data->name, errno, strerror(errno));
+		return;
+	}
+
+	/* Mask out any flags */
+	ret &= PR_SVE_VL_LEN_MASK;
+
+	/* Is that what we can read back directly? */
+	if (ret == data->rdvl())
+		ksft_test_result_pass("%s current VL is %d\n",
+				      data->name, ret);
+	else
+		ksft_test_result_fail("%s prctl() VL %d but RDVL is %d\n",
+				      data->name, ret, data->rdvl());
+}
+
+/* Does the prctl let us set the VL we already have? */
+static void prctl_set_same(struct vec_data *data)
+{
+	int cur_vl = data->rdvl();
+	int ret;
+
+	ret = prctl(data->prctl_set, cur_vl);
+	if (ret < 0) {
+		ksft_test_result_fail("%s prctl set failed: %d (%s)\n",
+				      data->name, errno, strerror(errno));
+		return;
+	}
+
+	if (cur_vl != data->rdvl())
+		ksft_test_result_pass("%s current VL is %d\n",
+				      data->name, ret);
+	else
+		ksft_test_result_fail("%s prctl() VL %d but RDVL is %d\n",
+				      data->name, ret, data->rdvl());
+}
+
+/* Can we set a new VL for this process? */
+static void prctl_set(struct vec_data *data)
+{
+	int ret;
+
+	if (data->min_vl == data->max_vl) {
+		ksft_test_result_skip("%s only one VL supported\n",
+				      data->name);
+		return;
+	}
+
+	/* Try to set the minimum VL */
+	ret = prctl(data->prctl_set, data->min_vl);
+	if (ret < 0) {
+		ksft_test_result_fail("%s prctl set failed for %d: %d (%s)\n",
+				      data->name, data->min_vl,
+				      errno, strerror(errno));
+		return;
+	}
+
+	if ((ret & PR_SVE_VL_LEN_MASK) != data->min_vl) {
+		ksft_test_result_fail("%s prctl set %d but return value is %d\n",
+				      data->name, data->min_vl, data->rdvl());
+		return;
+	}
+
+	if (data->rdvl() != data->min_vl) {
+		ksft_test_result_fail("%s set %d but RDVL is %d\n",
+				      data->name, data->min_vl, data->rdvl());
+		return;
+	}
+
+	/* Try to set the maximum VL */
+	ret = prctl(data->prctl_set, data->max_vl);
+	if (ret < 0) {
+		ksft_test_result_fail("%s prctl set failed for %d: %d (%s)\n",
+				      data->name, data->max_vl,
+				      errno, strerror(errno));
+		return;
+	}
+
+	if ((ret & PR_SVE_VL_LEN_MASK) != data->max_vl) {
+		ksft_test_result_fail("%s prctl() set %d but return value is %d\n",
+				      data->name, data->max_vl, data->rdvl());
+		return;
+	}
+
+	/* The _INHERIT flag should not be present when we read the VL */
+	ret = prctl(data->prctl_get);
+	if (ret == -1) {
+		ksft_test_result_fail("%s prctl() read failed: %d (%s)\n",
+				      data->name, errno, strerror(errno));
+		return;
+	}
+
+	if (ret & PR_SVE_VL_INHERIT) {
+		ksft_test_result_fail("%s prctl() reports _INHERIT\n",
+				      data->name);
+		return;
+	}
+
+	ksft_test_result_pass("%s prctl() set min/max\n", data->name);
+}
+
+/* If we didn't request it a new VL shouldn't affect the child */
+static void prctl_set_no_child(struct vec_data *data)
+{
+	int ret, child_vl;
+
+	if (data->min_vl == data->max_vl) {
+		ksft_test_result_skip("%s only one VL supported\n",
+				      data->name);
+		return;
+	}
+
+	ret = prctl(data->prctl_set, data->min_vl);
+	if (ret < 0) {
+		ksft_test_result_fail("%s prctl set failed for %d: %d (%s)\n",
+				      data->name, data->min_vl,
+				      errno, strerror(errno));
+		return;
+	}
+
+	/* Ensure the default VL is different */
+	ret = file_write_integer(data->default_vl_file, data->max_vl);
+	if (ret != 0)
+		return;
+
+	/* Check that the child has the default we just set */
+	child_vl = get_child_rdvl(data);
+	if (child_vl != data->max_vl) {
+		ksft_test_result_fail("%s is %d but child VL is %d\n",
+				      data->default_vl_file,
+				      data->max_vl, child_vl);
+		return;
+	}
+
+	ksft_test_result_pass("%s vector length used default\n", data->name);
+
+	file_write_integer(data->default_vl_file, data->default_vl);
+}
+
+/* If we didn't request it a new VL shouldn't affect the child */
+static void prctl_set_for_child(struct vec_data *data)
+{
+	int ret, child_vl;
+
+	if (data->min_vl == data->max_vl) {
+		ksft_test_result_skip("%s only one VL supported\n",
+				      data->name);
+		return;
+	}
+
+	ret = prctl(data->prctl_set, data->min_vl | PR_SVE_VL_INHERIT);
+	if (ret < 0) {
+		ksft_test_result_fail("%s prctl set failed for %d: %d (%s)\n",
+				      data->name, data->min_vl,
+				      errno, strerror(errno));
+		return;
+	}
+
+	/* The _INHERIT flag should be present when we read the VL */
+	ret = prctl(data->prctl_get);
+	if (ret == -1) {
+		ksft_test_result_fail("%s prctl() read failed: %d (%s)\n",
+				      data->name, errno, strerror(errno));
+		return;
+	}
+	if (!(ret & PR_SVE_VL_INHERIT)) {
+		ksft_test_result_fail("%s prctl() does not report _INHERIT\n",
+				      data->name);
+		return;
+	}
+
+	/* Ensure the default VL is different */
+	ret = file_write_integer(data->default_vl_file, data->max_vl);
+	if (ret != 0)
+		return;
+
+	/* Check that the child inherited our VL */
+	child_vl = get_child_rdvl(data);
+	if (child_vl != data->min_vl) {
+		ksft_test_result_fail("%s is %d but child VL is %d\n",
+				      data->default_vl_file,
+				      data->min_vl, child_vl);
+		return;
+	}
+
+	ksft_test_result_pass("%s vector length was inherited\n", data->name);
+
+	file_write_integer(data->default_vl_file, data->default_vl);
+}
+
+/* _ONEXEC takes effect only in the child process */
+static void prctl_set_onexec(struct vec_data *data)
+{
+	int ret, child_vl;
+
+	if (data->min_vl == data->max_vl) {
+		ksft_test_result_skip("%s only one VL supported\n",
+				      data->name);
+		return;
+	}
+
+	/* Set a known value for the default and our current VL */
+	ret = file_write_integer(data->default_vl_file, data->max_vl);
+	if (ret != 0)
+		return;
+
+	ret = prctl(data->prctl_set, data->max_vl);
+	if (ret < 0) {
+		ksft_test_result_fail("%s prctl set failed for %d: %d (%s)\n",
+				      data->name, data->min_vl,
+				      errno, strerror(errno));
+		return;
+	}
+
+	/* Set a different value for the child to have on exec */
+	ret = prctl(data->prctl_set, data->min_vl | PR_SVE_SET_VL_ONEXEC);
+	if (ret < 0) {
+		ksft_test_result_fail("%s prctl set failed for %d: %d (%s)\n",
+				      data->name, data->min_vl,
+				      errno, strerror(errno));
+		return;
+	}
+
+	/* Our current VL should stay the same */
+	if (data->rdvl() != data->max_vl) {
+		ksft_test_result_fail("%s VL changed by _ONEXEC prctl()\n",
+				      data->name);
+		return;
+	}
+
+	/* Check that the child inherited our VL */
+	child_vl = get_child_rdvl(data);
+	if (child_vl != data->min_vl) {
+		ksft_test_result_fail("Set %d _ONEXEC but child VL is %d\n",
+				      data->min_vl, child_vl);
+		return;
+	}
+
+	ksft_test_result_pass("%s vector length set on exec\n", data->name);
+
+	file_write_integer(data->default_vl_file, data->default_vl);
+}
+
+typedef void (*test_type)(struct vec_data *);
+
+static const test_type tests[] = {
+	/*
+	 * The default/min/max tests must be first and in this order
+	 * to provide data for other tests.
+	 */
+	proc_read_default,
+	proc_write_min,
+	proc_write_max,
+
+	prctl_get,
+	prctl_set,
+	prctl_set_no_child,
+	prctl_set_for_child,
+	prctl_set_onexec,
+};
+
+int main(void)
+{
+	int i, j;
+
+	ksft_print_header();
+	ksft_set_plan(ARRAY_SIZE(tests) * ARRAY_SIZE(vec_data));
+
+	for (i = 0; i < ARRAY_SIZE(vec_data); i++) {
+		struct vec_data *data = &vec_data[i];
+		unsigned long supported;
+
+		supported = getauxval(data->hwcap_type) & data->hwcap;
+
+		for (j = 0; j < ARRAY_SIZE(tests); j++) {
+			if (supported)
+				tests[j](data);
+			else
+				ksft_test_result_skip("%s not supported\n",
+						      data->name);
+		}
+	}
+
+	ksft_exit_pass();
+}
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 4/4] kselftest/arm64: Add a TODO list for floating point tests

[Mark Brown]

Write down some ideas for additional coverage for floating point in case
someone feels inspired to look into them.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
---
 tools/testing/selftests/arm64/fp/TODO | 4 ++++
 1 file changed, 4 insertions(+)
 create mode 100644 tools/testing/selftests/arm64/fp/TODO

diff --git a/tools/testing/selftests/arm64/fp/TODO b/tools/testing/selftests/arm64/fp/TODO
new file mode 100644
index 000000000000..b6b7ebfcf362
--- /dev/null
+++ b/tools/testing/selftests/arm64/fp/TODO
@@ -0,0 +1,4 @@
+- Test unsupported values in the ABIs.
+- More coverage for ptrace (eg, vector length conversions).
+- Coverage for signals.
+- Test PR_SVE_VL_INHERITY after a double fork.
-- 
2.20.1

[PATCH v5 4/4] kselftest/arm64: Add a TODO list for floating point tests

[Mark Brown]

Write down some ideas for additional coverage for floating point in case
someone feels inspired to look into them.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
---
 tools/testing/selftests/arm64/fp/TODO | 4 ++++
 1 file changed, 4 insertions(+)
 create mode 100644 tools/testing/selftests/arm64/fp/TODO

diff --git a/tools/testing/selftests/arm64/fp/TODO b/tools/testing/selftests/arm64/fp/TODO
new file mode 100644
index 000000000000..b6b7ebfcf362
--- /dev/null
+++ b/tools/testing/selftests/arm64/fp/TODO
@@ -0,0 +1,4 @@
+- Test unsupported values in the ABIs.
+- More coverage for ptrace (eg, vector length conversions).
+- Coverage for signals.
+- Test PR_SVE_VL_INHERITY after a double fork.
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 0/4] kselftest/arm64: Vector length configuration tests

[Catalin Marinas]

On Tue, 3 Aug 2021 15:04:46 +0100, Mark Brown wrote:
> Currently we don't have full automated tests for the vector length
> configuation ABIs offered for SVE, we have a helper binary for setting
> the vector length which can be used for manual tests and we use the
> prctl() interface to enumerate the vector lengths but don't actually
> verify that the vector lengths enumerated were set.
> 
> This patch series provides a small helper which allows us to get the
> currently configured vector length using the RDVL instruction via either
> a library call or stdout of a process and then uses this to both add
> verification of enumerated vector lengths to our existing tests and also
> add a new test program which exercises both the prctl() and sysfs
> interfaces.
> 
> [...]

Applied to arm64 (for-next/kselftest), thanks!

[1/4] kselftest/arm64: Provide a helper binary and "library" for SVE RDVL
      https://git.kernel.org/arm64/c/7710861017ac
[2/4] kselftest/arm64: Validate vector lengths are set in sve-probe-vls
      https://git.kernel.org/arm64/c/b43ab36a6d86
[3/4] kselftest/arm64: Add tests for SVE vector configuration
      https://git.kernel.org/arm64/c/95cf3f23877b
[4/4] kselftest/arm64: Add a TODO list for floating point tests
      https://git.kernel.org/arm64/c/e96595c55d23

-- 
Catalin

Re: [PATCH v5 0/4] kselftest/arm64: Vector length configuration tests

[Catalin Marinas]

On Tue, 3 Aug 2021 15:04:46 +0100, Mark Brown wrote:
> Currently we don't have full automated tests for the vector length
> configuation ABIs offered for SVE, we have a helper binary for setting
> the vector length which can be used for manual tests and we use the
> prctl() interface to enumerate the vector lengths but don't actually
> verify that the vector lengths enumerated were set.
> 
> This patch series provides a small helper which allows us to get the
> currently configured vector length using the RDVL instruction via either
> a library call or stdout of a process and then uses this to both add
> verification of enumerated vector lengths to our existing tests and also
> add a new test program which exercises both the prctl() and sysfs
> interfaces.
> 
> [...]

Applied to arm64 (for-next/kselftest), thanks!

[1/4] kselftest/arm64: Provide a helper binary and "library" for SVE RDVL
      https://git.kernel.org/arm64/c/7710861017ac
[2/4] kselftest/arm64: Validate vector lengths are set in sve-probe-vls
      https://git.kernel.org/arm64/c/b43ab36a6d86
[3/4] kselftest/arm64: Add tests for SVE vector configuration
      https://git.kernel.org/arm64/c/95cf3f23877b
[4/4] kselftest/arm64: Add a TODO list for floating point tests
      https://git.kernel.org/arm64/c/e96595c55d23

-- 
Catalin


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel