From: Matthew Hagan <mnhagan88@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Vladimir Oltean <olteanv@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Matthew Hagan <mnhagan88@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
Olof Johansson <olof@lixom.net>,
soc@kernel.org, Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
bcm-kernel-feedback-list@broadcom.com,
Sam Ravnborg <sam@ravnborg.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series
Date: Fri, 6 Aug 2021 21:44:31 +0100 [thread overview]
Message-ID: <20210806204446.2981299-1-mnhagan88@gmail.com> (raw)
Changes from v2:
- Introduce boards to Makefile in same patch as the board dts is added
(Vladimir Oltean)
- Use alphabetical ordering for labels (Vladimir Oltean)
- Remove address-cells and size-cells in qca8337 switch nodes (Vladimir
Oltean)
- Remove "cpu" labels from switch nodes' CPU ports (Vladimir Oltean)
- Various LED fixes, utilising dt-bindings/leds/common.h and correctly
specifying LEDs in the form "led-N" and with the color/function/
function-enumerator properties.
- Fix PWM LEDs and corresponding pinctrl bindings. (Vladimir Oltean)
The following changes were submitted as a separate series:
- Introduce patches to disable QSPI by default and enable where used
(Vladimir Oltean)
- Move mdio@18032000 node from board related file to SoC (Vladimir
Oltean)
- In addition to above, relocate mdio-mux to bcm-nsp.dtsi and fix
the resulting usb3_phy issues
Changes from v3:
- Sort labels on mx64 a0 dts files into alphabetical order as well
- move include directives for input/input.h and leds/common.h to
bcm958625-mx6x-common.dtsi
- Whitespace fixes in bcm958625-mx6x-common.dtsi
- rename "senao_nvram" partition to "nvram"
Changes from v4:
- Move chosen and memory nodes from bcm958625-mx6x-common.dtsi to
each .dts file (Arnd Bergmann).
- Append [@<unit-address>] to memory nodes.
- Create Ax stepping-specific dtsi for Ax devices (Arnd Bergmann).
- Append read-only property to at24 eeprom node.
- Remove L2 properties which should be defined at platform-level.
- Correct NAND node names.
Matthew Hagan (5):
ARM: dts: NSP: Add common bindings for MX64/MX65
ARM: dts: NSP: Add Ax stepping modifications
ARM: dts: NSP: Add DT files for Meraki MX64 series
ARM: dts: NSP: Add DT files for Meraki MX65 series
dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65
.../devicetree/bindings/arm/bcm/brcm,nsp.yaml | 6 +
arch/arm/boot/dts/Makefile | 6 +
arch/arm/boot/dts/bcm-nsp-ax.dtsi | 71 +++++
arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 279 ++++++++++++++++++
.../boot/dts/bcm958625-meraki-kingpin.dtsi | 163 ++++++++++
.../arm/boot/dts/bcm958625-meraki-mx64-a0.dts | 25 ++
arch/arm/boot/dts/bcm958625-meraki-mx64.dts | 24 ++
.../boot/dts/bcm958625-meraki-mx64w-a0.dts | 33 +++
arch/arm/boot/dts/bcm958625-meraki-mx64w.dts | 32 ++
arch/arm/boot/dts/bcm958625-meraki-mx65.dts | 24 ++
arch/arm/boot/dts/bcm958625-meraki-mx65w.dts | 32 ++
.../dts/bcm958625-meraki-mx6x-common.dtsi | 129 ++++++++
12 files changed, 824 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm-nsp-ax.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
--
2.26.3
WARNING: multiple messages have this Message-ID (diff)
From: Matthew Hagan <mnhagan88@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Matthew Hagan <mnhagan88@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
Olof Johansson <olof@lixom.net>,
soc@kernel.org, Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
bcm-kernel-feedback-list@broadcom.com,
Sam Ravnborg <sam@ravnborg.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series
Date: Fri, 6 Aug 2021 21:44:31 +0100 [thread overview]
Message-ID: <20210806204446.2981299-1-mnhagan88@gmail.com> (raw)
Changes from v2:
- Introduce boards to Makefile in same patch as the board dts is added
(Vladimir Oltean)
- Use alphabetical ordering for labels (Vladimir Oltean)
- Remove address-cells and size-cells in qca8337 switch nodes (Vladimir
Oltean)
- Remove "cpu" labels from switch nodes' CPU ports (Vladimir Oltean)
- Various LED fixes, utilising dt-bindings/leds/common.h and correctly
specifying LEDs in the form "led-N" and with the color/function/
function-enumerator properties.
- Fix PWM LEDs and corresponding pinctrl bindings. (Vladimir Oltean)
The following changes were submitted as a separate series:
- Introduce patches to disable QSPI by default and enable where used
(Vladimir Oltean)
- Move mdio@18032000 node from board related file to SoC (Vladimir
Oltean)
- In addition to above, relocate mdio-mux to bcm-nsp.dtsi and fix
the resulting usb3_phy issues
Changes from v3:
- Sort labels on mx64 a0 dts files into alphabetical order as well
- move include directives for input/input.h and leds/common.h to
bcm958625-mx6x-common.dtsi
- Whitespace fixes in bcm958625-mx6x-common.dtsi
- rename "senao_nvram" partition to "nvram"
Changes from v4:
- Move chosen and memory nodes from bcm958625-mx6x-common.dtsi to
each .dts file (Arnd Bergmann).
- Append [@<unit-address>] to memory nodes.
- Create Ax stepping-specific dtsi for Ax devices (Arnd Bergmann).
- Append read-only property to at24 eeprom node.
- Remove L2 properties which should be defined at platform-level.
- Correct NAND node names.
Matthew Hagan (5):
ARM: dts: NSP: Add common bindings for MX64/MX65
ARM: dts: NSP: Add Ax stepping modifications
ARM: dts: NSP: Add DT files for Meraki MX64 series
ARM: dts: NSP: Add DT files for Meraki MX65 series
dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65
.../devicetree/bindings/arm/bcm/brcm,nsp.yaml | 6 +
arch/arm/boot/dts/Makefile | 6 +
arch/arm/boot/dts/bcm-nsp-ax.dtsi | 71 +++++
arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 279 ++++++++++++++++++
.../boot/dts/bcm958625-meraki-kingpin.dtsi | 163 ++++++++++
.../arm/boot/dts/bcm958625-meraki-mx64-a0.dts | 25 ++
arch/arm/boot/dts/bcm958625-meraki-mx64.dts | 24 ++
.../boot/dts/bcm958625-meraki-mx64w-a0.dts | 33 +++
arch/arm/boot/dts/bcm958625-meraki-mx64w.dts | 32 ++
arch/arm/boot/dts/bcm958625-meraki-mx65.dts | 24 ++
arch/arm/boot/dts/bcm958625-meraki-mx65w.dts | 32 ++
.../dts/bcm958625-meraki-mx6x-common.dtsi | 129 ++++++++
12 files changed, 824 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm-nsp-ax.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
--
2.26.3
WARNING: multiple messages have this Message-ID (diff)
From: Matthew Hagan <mnhagan88@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Matthew Hagan <mnhagan88@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
Olof Johansson <olof@lixom.net>,
soc@kernel.org, Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
bcm-kernel-feedback-list@broadcom.com,
Sam Ravnborg <sam@ravnborg.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series
Date: Fri, 6 Aug 2021 21:44:31 +0100 [thread overview]
Message-ID: <20210806204446.2981299-1-mnhagan88@gmail.com> (raw)
Message-ID: <20210806204431.oPmbdLQQnetXQp9Bt6RHoBDg2bYwCeJQw6eA0Xl1acI@z> (raw)
Changes from v2:
- Introduce boards to Makefile in same patch as the board dts is added
(Vladimir Oltean)
- Use alphabetical ordering for labels (Vladimir Oltean)
- Remove address-cells and size-cells in qca8337 switch nodes (Vladimir
Oltean)
- Remove "cpu" labels from switch nodes' CPU ports (Vladimir Oltean)
- Various LED fixes, utilising dt-bindings/leds/common.h and correctly
specifying LEDs in the form "led-N" and with the color/function/
function-enumerator properties.
- Fix PWM LEDs and corresponding pinctrl bindings. (Vladimir Oltean)
The following changes were submitted as a separate series:
- Introduce patches to disable QSPI by default and enable where used
(Vladimir Oltean)
- Move mdio@18032000 node from board related file to SoC (Vladimir
Oltean)
- In addition to above, relocate mdio-mux to bcm-nsp.dtsi and fix
the resulting usb3_phy issues
Changes from v3:
- Sort labels on mx64 a0 dts files into alphabetical order as well
- move include directives for input/input.h and leds/common.h to
bcm958625-mx6x-common.dtsi
- Whitespace fixes in bcm958625-mx6x-common.dtsi
- rename "senao_nvram" partition to "nvram"
Changes from v4:
- Move chosen and memory nodes from bcm958625-mx6x-common.dtsi to
each .dts file (Arnd Bergmann).
- Append [@<unit-address>] to memory nodes.
- Create Ax stepping-specific dtsi for Ax devices (Arnd Bergmann).
- Append read-only property to at24 eeprom node.
- Remove L2 properties which should be defined at platform-level.
- Correct NAND node names.
Matthew Hagan (5):
ARM: dts: NSP: Add common bindings for MX64/MX65
ARM: dts: NSP: Add Ax stepping modifications
ARM: dts: NSP: Add DT files for Meraki MX64 series
ARM: dts: NSP: Add DT files for Meraki MX65 series
dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65
.../devicetree/bindings/arm/bcm/brcm,nsp.yaml | 6 +
arch/arm/boot/dts/Makefile | 6 +
arch/arm/boot/dts/bcm-nsp-ax.dtsi | 71 +++++
arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 279 ++++++++++++++++++
.../boot/dts/bcm958625-meraki-kingpin.dtsi | 163 ++++++++++
.../arm/boot/dts/bcm958625-meraki-mx64-a0.dts | 25 ++
arch/arm/boot/dts/bcm958625-meraki-mx64.dts | 24 ++
.../boot/dts/bcm958625-meraki-mx64w-a0.dts | 33 +++
arch/arm/boot/dts/bcm958625-meraki-mx64w.dts | 32 ++
arch/arm/boot/dts/bcm958625-meraki-mx65.dts | 24 ++
arch/arm/boot/dts/bcm958625-meraki-mx65w.dts | 32 ++
.../dts/bcm958625-meraki-mx6x-common.dtsi | 129 ++++++++
12 files changed, 824 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm-nsp-ax.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
--
2.26.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-08-06 20:44 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-06 20:44 Matthew Hagan [this message]
2021-08-06 20:44 ` [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` [PATCH v5 1/5] ARM: dts: NSP: Add common bindings for MX64/MX65 Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-22 19:06 ` Florian Fainelli
2021-08-22 19:06 ` Florian Fainelli
2021-08-06 20:44 ` [PATCH v5 2/5] ARM: dts: NSP: Add Ax stepping modifications Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-22 19:07 ` Florian Fainelli
2021-08-22 19:07 ` Florian Fainelli
2021-08-06 20:44 ` [PATCH v5 3/5] ARM: dts: NSP: Add DT files for Meraki MX64 series Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-22 19:07 ` Florian Fainelli
2021-08-22 19:07 ` Florian Fainelli
2021-08-06 20:44 ` [PATCH v5 4/5] ARM: dts: NSP: Add DT files for Meraki MX65 series Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-22 19:08 ` Florian Fainelli
2021-08-22 19:08 ` Florian Fainelli
2021-08-06 20:44 ` [PATCH v5 5/5] dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65 Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-22 19:11 ` Florian Fainelli
2021-08-22 19:11 ` Florian Fainelli
2021-08-22 19:11 ` [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series Florian Fainelli
2021-08-22 19:11 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210806204446.2981299-1-mnhagan88@gmail.com \
--to=mnhagan88@gmail.com \
--cc=arnd@arndb.de \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=geert+renesas@glider.be \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olof@lixom.net \
--cc=olteanv@gmail.com \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=sbranden@broadcom.com \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.