[PATCH 0/5] arm: mach-k3: Fixes for j721e/j7200 clock data and drivers

[PATCH 0/5] arm: mach-k3: Fixes for j721e/j7200 clock data and drivers

[Dave Gerlach]

Hi,
This series contains several fixes for TI j721e and j7200 platforms data
and also some fixes for TI clock drivers that make use of this data.

All fixes are related to PLL post dividers reporting the wrong frequency,
and now the new frequencies for below clocks match what registers are
actually configured for.

Clock: Old Frequency -> New Frequency
-----------------------------------------
postdiv2_16fft_main_0_hsdivout6_clk: 66666667 -> 200000000
postdiv2_16fft_main_1_hsdivout5_clk: 320000000 -> 960000000
postdiv2_16fft_main_1_hsdivout7_clk: 320000000 -> 960000000

Regards,
Dave

Dave Gerlach (2):
  arm: mach-k3: Add note to auto-generated files
  clk: ti: k3-pll: Change DIV_CTRL programming to read-modify-write

Suman Anna (3):
  arm: mach-k3: j721e: Fix clk-data parenting for postdiv PLL clocks
  arm: mach-k3: j7200: Fix clk-data parenting for postdiv PLL clocks
  clk: ti: k3: Update driver to account for divider flags

 arch/arm/mach-k3/j7200/clk-data.c |  87 ++++++++++++-----------
 arch/arm/mach-k3/j7200/dev-data.c |   2 +
 arch/arm/mach-k3/j721e/clk-data.c | 113 +++++++++++++++---------------
 arch/arm/mach-k3/j721e/dev-data.c |   2 +
 drivers/clk/ti/clk-k3-pll.c       |  13 +++-
 drivers/clk/ti/clk-k3.c           |   4 +-
 include/k3-clk.h                  |  30 ++++----
 7 files changed, 137 insertions(+), 114 deletions(-)

-- 
2.28.0

[PATCH 1/5] arm: mach-k3: j721e: Fix clk-data parenting for postdiv PLL clocks

[Dave Gerlach]

From: Suman Anna <s-anna@ti.com>

The TI K3 Fractional PLLs use two programmable POSTDIV1 and POSTDIV2
divisors to generate the final FOUTPOSTDIV clock. These are in sequence
with POSTDIV2 following the POSTDIV1 clock. The current J721E clock data
has the POSTDIV2 clock as the parent for the POSTDIV1 clock, which is
opposite of the actual implementation. Fix the data by simply adjusting
the register bit-shifts.

The Main PLL1 POSTDIV clocks were also defined incorrectly using Main PLL0
register values, fix these as well.

Fixes: 277729eaf373 ("arm: mach-k3: Add platform data for j721e and j7200")
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
---
 arch/arm/mach-k3/j721e/clk-data.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-k3/j721e/clk-data.c b/arch/arm/mach-k3/j721e/clk-data.c
index 953ac457130b..ff9262d7bcee 100644
--- a/arch/arm/mach-k3/j721e/clk-data.c
+++ b/arch/arm/mach-k3/j721e/clk-data.c
@@ -463,8 +463,8 @@ static const struct clk_data clk_list[] = {
 	CLK_MUX("wkup_fref_clksel_out0", wkup_fref_clksel_out0_parents, 2, 0x43008050, 8, 1, 0),
 	CLK_MUX("main_pll_hfosc_sel_out1", main_pll_hfosc_sel_out1_parents, 2, 0x43008084, 0, 1, 0),
 	CLK_PLL_DEFFREQ("pllfrac2_ssmod_16fft_main_1_foutvcop_clk", "main_pll_hfosc_sel_out1", 0x681000, 0, 1920000000),
-	CLK_DIV("pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk_subdiv", "pllfrac2_ssmod_16fft_main_1_foutvcop_clk", 0x680038, 24, 3, 0),
-	CLK_DIV("pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk", "pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk_subdiv", 0x680038, 16, 3, 0),
+	CLK_DIV("pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk_subdiv", "pllfrac2_ssmod_16fft_main_1_foutvcop_clk", 0x681038, 16, 3, 0),
+	CLK_DIV("pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk", "pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk_subdiv", 0x681038, 24, 3, 0),
 	CLK_PLL("pllfrac2_ssmod_16fft_mcu_0_foutvcop_clk", "wkup_fref_clksel_out0", 0x40d00000, 0),
 	CLK_PLL_DEFFREQ("pllfrac2_ssmod_16fft_mcu_1_foutvcop_clk", "wkup_fref_clksel_out0", 0x40d01000, 0, 2400000000),
 	CLK_PLL_DEFFREQ("pllfrac2_ssmod_16fft_mcu_2_foutvcop_clk", "wkup_fref_clksel_out0", 0x40d02000, 0, 2000000000),
@@ -523,8 +523,8 @@ static const struct clk_data clk_list[] = {
 	CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout3_clk", "pllfrac2_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d0208c, 0, 7, 0),
 	CLK_FIXED_RATE("j7_wakeup_16ff_wkup_0_wkup_rcosc_32k_clk", 32000, 0),
 	CLK_PLL("pllfrac2_ssmod_16fft_main_0_foutvcop_clk", "main_pll_hfosc_sel_out0", 0x680000, 0),
-	CLK_DIV("pllfrac2_ssmod_16fft_main_0_foutpostdiv_clk_subdiv", "pllfrac2_ssmod_16fft_main_0_foutvcop_clk", 0x680038, 24, 3, 0),
-	CLK_DIV("pllfrac2_ssmod_16fft_main_0_foutpostdiv_clk", "pllfrac2_ssmod_16fft_main_0_foutpostdiv_clk_subdiv", 0x680038, 16, 3, 0),
+	CLK_DIV("pllfrac2_ssmod_16fft_main_0_foutpostdiv_clk_subdiv", "pllfrac2_ssmod_16fft_main_0_foutvcop_clk", 0x680038, 16, 3, 0),
+	CLK_DIV("pllfrac2_ssmod_16fft_main_0_foutpostdiv_clk", "pllfrac2_ssmod_16fft_main_0_foutpostdiv_clk_subdiv", 0x680038, 24, 3, 0),
 	CLK_PLL("pllfrac2_ssmod_16fft_main_13_foutvcop_clk", "main_pll_hfosc_sel_out13", 0x68d000, 0),
 	CLK_PLL("pllfrac2_ssmod_16fft_main_14_foutvcop_clk", "main_pll_hfosc_sel_out14", 0x68e000, 0),
 	CLK_PLL("pllfrac2_ssmod_16fft_main_16_foutvcop_clk", "main_pll_hfosc_sel_out16", 0x690000, 0),
-- 
2.28.0

[PATCH 2/5] arm: mach-k3: j7200: Fix clk-data parenting for postdiv PLL clocks

[Dave Gerlach]

From: Suman Anna <s-anna@ti.com>

The TI K3 Fractional PLLs use two programmable POSTDIV1 and POSTDIV2
divisors to generate the final FOUTPOSTDIV clock. These are in sequence
with POSTDIV2 following the POSTDIV1 clock. The current J7200 clock data
has the POSTDIV2 clock as the parent for the POSTDIV1 clock, which is
opposite of the actual implementation. Fix the data by simply adjusting
the register bit-shifts.

The Main PLL1 POSTDIV clocks were also defined incorrectly using Main PLL0
register values, fix these as well.

Fixes: 277729eaf373 ("arm: mach-k3: Add platform data for j721e and j7200")
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
---
 arch/arm/mach-k3/j7200/clk-data.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-k3/j7200/clk-data.c b/arch/arm/mach-k3/j7200/clk-data.c
index 93c067079ab6..49145bbfc8cd 100644
--- a/arch/arm/mach-k3/j7200/clk-data.c
+++ b/arch/arm/mach-k3/j7200/clk-data.c
@@ -319,8 +319,8 @@ static const struct clk_data clk_list[] = {
 	CLK_MUX("wkup_fref_clksel_out0", wkup_fref_clksel_out0_parents, 2, 0x43008050, 8, 1, 0),
 	CLK_MUX("main_pll_hfosc_sel_out1", main_pll_hfosc_sel_out1_parents, 2, 0x43008084, 0, 1, 0),
 	CLK_PLL_DEFFREQ("pllfracf_ssmod_16fft_main_1_foutvcop_clk", "main_pll_hfosc_sel_out1", 0x681000, 0, 1920000000),
-	CLK_DIV("pllfracf_ssmod_16fft_main_1_foutpostdiv_clk_subdiv", "pllfracf_ssmod_16fft_main_1_foutvcop_clk", 0x680038, 24, 3, 0),
-	CLK_DIV("pllfracf_ssmod_16fft_main_1_foutpostdiv_clk", "pllfracf_ssmod_16fft_main_1_foutpostdiv_clk_subdiv", 0x680038, 16, 3, 0),
+	CLK_DIV("pllfracf_ssmod_16fft_main_1_foutpostdiv_clk_subdiv", "pllfracf_ssmod_16fft_main_1_foutvcop_clk", 0x681038, 16, 3, 0),
+	CLK_DIV("pllfracf_ssmod_16fft_main_1_foutpostdiv_clk", "pllfracf_ssmod_16fft_main_1_foutpostdiv_clk_subdiv", 0x681038, 24, 3, 0),
 	CLK_PLL("pllfracf_ssmod_16fft_mcu_0_foutvcop_clk", "wkup_fref_clksel_out0", 0x40d00000, 0),
 	CLK_PLL_DEFFREQ("pllfracf_ssmod_16fft_mcu_1_foutvcop_clk", "wkup_fref_clksel_out0", 0x40d01000, 0, 2400000000),
 	CLK_PLL_DEFFREQ("pllfracf_ssmod_16fft_mcu_2_foutvcop_clk", "wkup_fref_clksel_out0", 0x40d02000, 0, 2000000000),
@@ -360,8 +360,8 @@ static const struct clk_data clk_list[] = {
 	CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout2_clk", "pllfracf_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d02088, 0, 7, 0),
 	CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout3_clk", "pllfracf_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d0208c, 0, 7, 0),
 	CLK_PLL("pllfracf_ssmod_16fft_main_0_foutvcop_clk", "main_pll_hfosc_sel_out0", 0x680000, 0),
-	CLK_DIV("pllfracf_ssmod_16fft_main_0_foutpostdiv_clk_subdiv", "pllfracf_ssmod_16fft_main_0_foutvcop_clk", 0x680038, 24, 3, 0),
-	CLK_DIV("pllfracf_ssmod_16fft_main_0_foutpostdiv_clk", "pllfracf_ssmod_16fft_main_0_foutpostdiv_clk_subdiv", 0x680038, 16, 3, 0),
+	CLK_DIV("pllfracf_ssmod_16fft_main_0_foutpostdiv_clk_subdiv", "pllfracf_ssmod_16fft_main_0_foutvcop_clk", 0x680038, 16, 3, 0),
+	CLK_DIV("pllfracf_ssmod_16fft_main_0_foutpostdiv_clk", "pllfracf_ssmod_16fft_main_0_foutpostdiv_clk_subdiv", 0x680038, 24, 3, 0),
 	CLK_PLL("pllfracf_ssmod_16fft_main_12_foutvcop_clk", "main_pll_hfosc_sel_out12", 0x68c000, 0),
 	CLK_PLL("pllfracf_ssmod_16fft_main_14_foutvcop_clk", "main_pll_hfosc_sel_out14", 0x68e000, 0),
 	CLK_PLL("pllfracf_ssmod_16fft_main_2_foutvcop_clk", "main_pll_hfosc_sel_out2", 0x682000, 0),
-- 
2.28.0

[PATCH 3/5] arm: mach-k3: Add note to auto-generated files

[Dave Gerlach]

Add a note to the automatically generated clk-data and dev-data files
for j721e and j7200 to indicate that they are in fact auto-generated and
should not be hand edited.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
---
 arch/arm/mach-k3/j7200/clk-data.c | 2 ++
 arch/arm/mach-k3/j7200/dev-data.c | 2 ++
 arch/arm/mach-k3/j721e/clk-data.c | 2 ++
 arch/arm/mach-k3/j721e/dev-data.c | 2 ++
 4 files changed, 8 insertions(+)

diff --git a/arch/arm/mach-k3/j7200/clk-data.c b/arch/arm/mach-k3/j7200/clk-data.c
index 49145bbfc8cd..649d28b1db0b 100644
--- a/arch/arm/mach-k3/j7200/clk-data.c
+++ b/arch/arm/mach-k3/j7200/clk-data.c
@@ -2,6 +2,8 @@
 /*
  * J7200 specific clock platform data
  *
+ * This file is auto generated. Please do not edit directly.
+ *
  * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/
  */
 #include "k3-clk.h"
diff --git a/arch/arm/mach-k3/j7200/dev-data.c b/arch/arm/mach-k3/j7200/dev-data.c
index c68bcc58e9a7..f7b7892da97b 100644
--- a/arch/arm/mach-k3/j7200/dev-data.c
+++ b/arch/arm/mach-k3/j7200/dev-data.c
@@ -2,6 +2,8 @@
 /*
  * J7200 specific device platform data
  *
+ * This file is auto generated. Please do not edit directly.
+ *
  * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/
  */
 #include "k3-dev.h"
diff --git a/arch/arm/mach-k3/j721e/clk-data.c b/arch/arm/mach-k3/j721e/clk-data.c
index ff9262d7bcee..aa3f50a02f59 100644
--- a/arch/arm/mach-k3/j721e/clk-data.c
+++ b/arch/arm/mach-k3/j721e/clk-data.c
@@ -2,6 +2,8 @@
 /*
  * J721E specific clock platform data
  *
+ * This file is auto generated. Please do not edit directly.
+ *
  * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/
  */
 #include "k3-clk.h"
diff --git a/arch/arm/mach-k3/j721e/dev-data.c b/arch/arm/mach-k3/j721e/dev-data.c
index 96393c713278..a8bc6ce20d1d 100644
--- a/arch/arm/mach-k3/j721e/dev-data.c
+++ b/arch/arm/mach-k3/j721e/dev-data.c
@@ -2,6 +2,8 @@
 /*
  * J721E specific device platform data
  *
+ * This file is auto generated. Please do not edit directly.
+ *
  * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/
  */
 #include "k3-dev.h"
-- 
2.28.0

[PATCH 4/5] clk: ti: k3-pll: Change DIV_CTRL programming to read-modify-write

[Dave Gerlach]

There are three different divider values in the DIV_CTRL register
controlled by the k3-pll driver. Currently the ti_pll_clk_set_rate
function writes the entire register when programming plld, even though
plld only resides in the lower 6 bits.

Change the plld programming to read-modify-write to only affect the
relevant bits for plld and to preserve the other two divider values
present in the upper 16 bits, otherwise they will always get set to zero
when programming plld.

Fixes: 0aa2930ca192 ("clk: add support for TI K3 SoC PLL")
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
---
 drivers/clk/ti/clk-k3-pll.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/ti/clk-k3-pll.c b/drivers/clk/ti/clk-k3-pll.c
index bf2407a020a3..bf762c558ef0 100644
--- a/drivers/clk/ti/clk-k3-pll.c
+++ b/drivers/clk/ti/clk-k3-pll.c
@@ -2,7 +2,7 @@
 /*
  * Texas Instruments K3 SoC PLL clock driver
  *
- * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/
  *	Tero Kristo <t-kristo@ti.com>
  */
 
@@ -122,6 +122,7 @@ static ulong ti_pll_clk_set_rate(struct clk *clk, ulong rate)
 	unsigned long pllm;
 	u32 pllfm = 0;
 	unsigned long plld;
+	u32 div_ctrl;
 	u32 rem;
 	int shift;
 
@@ -175,7 +176,15 @@ static ulong ti_pll_clk_set_rate(struct clk *clk, ulong rate)
 
 	writel(pllm, pll->reg + PLL_16FFT_FREQ_CTRL0);
 	writel(pllfm, pll->reg + PLL_16FFT_FREQ_CTRL1);
-	writel(plld, pll->reg + PLL_16FFT_DIV_CTRL);
+
+	/*
+	 * div_ctrl register contains other divider values, so rmw
+	 * only plld and leave existing values alone
+	 */
+	div_ctrl = readl(pll->reg + PLL_16FFT_DIV_CTRL);
+	div_ctrl &= ~PLL_16FFT_DIV_CTRL_REF_DIV_MASK;
+	div_ctrl |= plld;
+	writel(div_ctrl, pll->reg + PLL_16FFT_DIV_CTRL);
 
 	ctrl &= ~PLL_16FFT_CTRL_BYPASS_EN;
 	ctrl |= PLL_16FFT_CTRL_PLL_EN;
-- 
2.28.0

[PATCH 5/5] clk: ti: k3: Update driver to account for divider flags

[Dave Gerlach]

From: Suman Anna <s-anna@ti.com>

The K3 SoCs have some PLL output clocks (POSTDIV clocks) which in
turn serve as inputs to other HSDIV output clocks. These clocks use
the actual value to compute the divider clock rate, and need to be
registered with the CLK_DIVIDER_ONE_BASED flags. The current k3-clk
driver and data lacks the infrastructure to pass in divider flags.
Update the driver and data to account for these divider flags.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
---
 arch/arm/mach-k3/j7200/clk-data.c |  85 ++++++++++++-----------
 arch/arm/mach-k3/j721e/clk-data.c | 111 +++++++++++++++---------------
 drivers/clk/ti/clk-k3.c           |   4 +-
 include/k3-clk.h                  |  30 ++++----
 4 files changed, 118 insertions(+), 112 deletions(-)

diff --git a/arch/arm/mach-k3/j7200/clk-data.c b/arch/arm/mach-k3/j7200/clk-data.c
index 649d28b1db0b..7a8e6bad57e3 100644
--- a/arch/arm/mach-k3/j7200/clk-data.c
+++ b/arch/arm/mach-k3/j7200/clk-data.c
@@ -6,6 +6,7 @@
  *
  * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/
  */
+#include <linux/clk-provider.h>
 #include "k3-clk.h"
 
 static const char * const gluelogic_hfosc0_clkout_parents[] = {
@@ -321,18 +322,18 @@ static const struct clk_data clk_list[] = {
 	CLK_MUX("wkup_fref_clksel_out0", wkup_fref_clksel_out0_parents, 2, 0x43008050, 8, 1, 0),
 	CLK_MUX("main_pll_hfosc_sel_out1", main_pll_hfosc_sel_out1_parents, 2, 0x43008084, 0, 1, 0),
 	CLK_PLL_DEFFREQ("pllfracf_ssmod_16fft_main_1_foutvcop_clk", "main_pll_hfosc_sel_out1", 0x681000, 0, 1920000000),
-	CLK_DIV("pllfracf_ssmod_16fft_main_1_foutpostdiv_clk_subdiv", "pllfracf_ssmod_16fft_main_1_foutvcop_clk", 0x681038, 16, 3, 0),
-	CLK_DIV("pllfracf_ssmod_16fft_main_1_foutpostdiv_clk", "pllfracf_ssmod_16fft_main_1_foutpostdiv_clk_subdiv", 0x681038, 24, 3, 0),
+	CLK_DIV("pllfracf_ssmod_16fft_main_1_foutpostdiv_clk_subdiv", "pllfracf_ssmod_16fft_main_1_foutvcop_clk", 0x681038, 16, 3, 0, CLK_DIVIDER_ONE_BASED),
+	CLK_DIV("pllfracf_ssmod_16fft_main_1_foutpostdiv_clk", "pllfracf_ssmod_16fft_main_1_foutpostdiv_clk_subdiv", 0x681038, 24, 3, 0, CLK_DIVIDER_ONE_BASED),
 	CLK_PLL("pllfracf_ssmod_16fft_mcu_0_foutvcop_clk", "wkup_fref_clksel_out0", 0x40d00000, 0),
 	CLK_PLL_DEFFREQ("pllfracf_ssmod_16fft_mcu_1_foutvcop_clk", "wkup_fref_clksel_out0", 0x40d01000, 0, 2400000000),
 	CLK_PLL_DEFFREQ("pllfracf_ssmod_16fft_mcu_2_foutvcop_clk", "wkup_fref_clksel_out0", 0x40d02000, 0, 2000000000),
-	CLK_DIV("postdiv2_16fft_main_1_hsdivout5_clk", "pllfracf_ssmod_16fft_main_1_foutpostdiv_clk", 0x681094, 0, 7, 0),
-	CLK_DIV("hsdiv1_16fft_mcu_0_hsdivout0_clk", "pllfracf_ssmod_16fft_mcu_0_foutvcop_clk", 0x40d00080, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_mcu_1_hsdivout3_clk", "pllfracf_ssmod_16fft_mcu_1_foutvcop_clk", 0x40d0108c, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_mcu_1_hsdivout4_clk", "pllfracf_ssmod_16fft_mcu_1_foutvcop_clk", 0x40d01090, 0, 7, 0),
-	CLK_DIV_DEFFREQ("hsdiv4_16fft_mcu_2_hsdivout4_clk", "pllfracf_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d02090, 0, 7, 0, 166666666),
+	CLK_DIV("postdiv2_16fft_main_1_hsdivout5_clk", "pllfracf_ssmod_16fft_main_1_foutpostdiv_clk", 0x681094, 0, 7, 0, 0),
+	CLK_DIV("hsdiv1_16fft_mcu_0_hsdivout0_clk", "pllfracf_ssmod_16fft_mcu_0_foutvcop_clk", 0x40d00080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_mcu_1_hsdivout3_clk", "pllfracf_ssmod_16fft_mcu_1_foutvcop_clk", 0x40d0108c, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_mcu_1_hsdivout4_clk", "pllfracf_ssmod_16fft_mcu_1_foutvcop_clk", 0x40d01090, 0, 7, 0, 0),
+	CLK_DIV_DEFFREQ("hsdiv4_16fft_mcu_2_hsdivout4_clk", "pllfracf_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d02090, 0, 7, 0, 0, 166666666),
 	CLK_MUX_PLLCTRL("k3_pll_ctrl_wrap_wkup_0_sysclkout_clk", k3_pll_ctrl_wrap_wkup_0_sysclkout_clk_parents, 2, 0x42010000, 0),
-	CLK_DIV("k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk", "k3_pll_ctrl_wrap_wkup_0_sysclkout_clk", 0x42010118, 0, 5, 0),
+	CLK_DIV("k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk", "k3_pll_ctrl_wrap_wkup_0_sysclkout_clk", 0x42010118, 0, 5, 0, 0),
 	CLK_MUX("mcu_ospi_ref_clk_sel_out0", mcu_ospi_ref_clk_sel_out0_parents, 2, 0x40f08030, 0, 1, 0),
 	CLK_MUX("mcuusart_clk_sel_out0", mcuusart_clk_sel_out0_parents, 2, 0x40f081c0, 0, 1, 0),
 	CLK_MUX("wkup_gpio0_clksel_out0", wkup_gpio0_clksel_out0_parents, 4, 0x43008070, 0, 2, 0),
@@ -353,46 +354,46 @@ static const struct clk_data clk_list[] = {
 	CLK_FIXED_RATE("board_0_mcu_i2c0_scl_out", 0, 0),
 	CLK_FIXED_RATE("board_0_wkup_lf_clkin_out", 0, 0),
 	CLK_FIXED_RATE("emmcsd4ss_main_0_emmcsdss_io_clk_o", 0, 0),
-	CLK_DIV_DEFFREQ("hsdiv4_16fft_main_1_hsdivout0_clk", "pllfracf_ssmod_16fft_main_1_foutvcop_clk", 0x681080, 0, 7, 0, 192000000),
-	CLK_DIV("hsdiv4_16fft_main_1_hsdivout2_clk", "pllfracf_ssmod_16fft_main_1_foutvcop_clk", 0x681088, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_mcu_1_hsdivout1_clk", "pllfracf_ssmod_16fft_mcu_1_foutvcop_clk", 0x40d01084, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_mcu_1_hsdivout2_clk", "pllfracf_ssmod_16fft_mcu_1_foutvcop_clk", 0x40d01088, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout0_clk", "pllfracf_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d02080, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout1_clk", "pllfracf_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d02084, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout2_clk", "pllfracf_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d02088, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout3_clk", "pllfracf_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d0208c, 0, 7, 0),
+	CLK_DIV_DEFFREQ("hsdiv4_16fft_main_1_hsdivout0_clk", "pllfracf_ssmod_16fft_main_1_foutvcop_clk", 0x681080, 0, 7, 0, 0, 192000000),
+	CLK_DIV("hsdiv4_16fft_main_1_hsdivout2_clk", "pllfracf_ssmod_16fft_main_1_foutvcop_clk", 0x681088, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_mcu_1_hsdivout1_clk", "pllfracf_ssmod_16fft_mcu_1_foutvcop_clk", 0x40d01084, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_mcu_1_hsdivout2_clk", "pllfracf_ssmod_16fft_mcu_1_foutvcop_clk", 0x40d01088, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout0_clk", "pllfracf_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d02080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout1_clk", "pllfracf_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d02084, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout2_clk", "pllfracf_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d02088, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout3_clk", "pllfracf_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d0208c, 0, 7, 0, 0),
 	CLK_PLL("pllfracf_ssmod_16fft_main_0_foutvcop_clk", "main_pll_hfosc_sel_out0", 0x680000, 0),
-	CLK_DIV("pllfracf_ssmod_16fft_main_0_foutpostdiv_clk_subdiv", "pllfracf_ssmod_16fft_main_0_foutvcop_clk", 0x680038, 16, 3, 0),
-	CLK_DIV("pllfracf_ssmod_16fft_main_0_foutpostdiv_clk", "pllfracf_ssmod_16fft_main_0_foutpostdiv_clk_subdiv", 0x680038, 24, 3, 0),
+	CLK_DIV("pllfracf_ssmod_16fft_main_0_foutpostdiv_clk_subdiv", "pllfracf_ssmod_16fft_main_0_foutvcop_clk", 0x680038, 16, 3, 0, CLK_DIVIDER_ONE_BASED),
+	CLK_DIV("pllfracf_ssmod_16fft_main_0_foutpostdiv_clk", "pllfracf_ssmod_16fft_main_0_foutpostdiv_clk_subdiv", 0x680038, 24, 3, 0, CLK_DIVIDER_ONE_BASED),
 	CLK_PLL("pllfracf_ssmod_16fft_main_12_foutvcop_clk", "main_pll_hfosc_sel_out12", 0x68c000, 0),
 	CLK_PLL("pllfracf_ssmod_16fft_main_14_foutvcop_clk", "main_pll_hfosc_sel_out14", 0x68e000, 0),
 	CLK_PLL("pllfracf_ssmod_16fft_main_2_foutvcop_clk", "main_pll_hfosc_sel_out2", 0x682000, 0),
 	CLK_PLL("pllfracf_ssmod_16fft_main_3_foutvcop_clk", "main_pll_hfosc_sel_out3", 0x683000, 0),
 	CLK_PLL("pllfracf_ssmod_16fft_main_7_foutvcop_clk", "main_pll_hfosc_sel_out7", 0x687000, 0),
 	CLK_PLL("pllfracf_ssmod_16fft_main_8_foutvcop_clk", "main_pll_hfosc_sel_out8", 0x688000, 0),
-	CLK_DIV("postdiv2_16fft_main_0_hsdivout6_clk", "pllfracf_ssmod_16fft_main_0_foutpostdiv_clk", 0x680098, 0, 7, 0),
-	CLK_DIV("postdiv2_16fft_main_1_hsdivout7_clk", "pllfracf_ssmod_16fft_main_1_foutpostdiv_clk", 0x68109c, 0, 7, 0),
+	CLK_DIV("postdiv2_16fft_main_0_hsdivout6_clk", "pllfracf_ssmod_16fft_main_0_foutpostdiv_clk", 0x680098, 0, 7, 0, 0),
+	CLK_DIV("postdiv2_16fft_main_1_hsdivout7_clk", "pllfracf_ssmod_16fft_main_1_foutpostdiv_clk", 0x68109c, 0, 7, 0, 0),
 	CLK_MUX("wkup_obsclk_mux_out0", wkup_obsclk_mux_out0_parents, 16, 0x43008000, 0, 4, 0),
 	CLK_MUX("main_pll4_xref_sel_out0", main_pll4_xref_sel_out0_parents, 2, 0x43008090, 4, 1, 0),
 	CLK_MUX("mcu_clkout_mux_out0", mcu_clkout_mux_out0_parents, 2, 0x40f08010, 0, 1, 0),
-	CLK_DIV_DEFFREQ("usart_programmable_clock_divider_out0", "hsdiv4_16fft_main_1_hsdivout0_clk", 0x1081c0, 0, 2, 0, 48000000),
-	CLK_DIV("hsdiv0_16fft_main_12_hsdivout0_clk", "pllfracf_ssmod_16fft_main_12_foutvcop_clk", 0x68c080, 0, 7, 0),
-	CLK_DIV("hsdiv0_16fft_main_7_hsdivout0_clk", "pllfracf_ssmod_16fft_main_7_foutvcop_clk", 0x687080, 0, 7, 0),
-	CLK_DIV("hsdiv0_16fft_main_8_hsdivout0_clk", "pllfracf_ssmod_16fft_main_8_foutvcop_clk", 0x688080, 0, 7, 0),
-	CLK_DIV("hsdiv1_16fft_main_14_hsdivout0_clk", "pllfracf_ssmod_16fft_main_14_foutvcop_clk", 0x68e080, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_0_hsdivout0_clk", "pllfracf_ssmod_16fft_main_0_foutvcop_clk", 0x680080, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_0_hsdivout1_clk", "pllfracf_ssmod_16fft_main_0_foutvcop_clk", 0x680084, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_0_hsdivout2_clk", "pllfracf_ssmod_16fft_main_0_foutvcop_clk", 0x680088, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_0_hsdivout3_clk", "pllfracf_ssmod_16fft_main_0_foutvcop_clk", 0x68008c, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_0_hsdivout4_clk", "pllfracf_ssmod_16fft_main_0_foutvcop_clk", 0x680090, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_2_hsdivout0_clk", "pllfracf_ssmod_16fft_main_2_foutvcop_clk", 0x682080, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_2_hsdivout1_clk", "pllfracf_ssmod_16fft_main_2_foutvcop_clk", 0x682084, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_3_hsdivout0_clk", "pllfracf_ssmod_16fft_main_3_foutvcop_clk", 0x683080, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_3_hsdivout1_clk", "pllfracf_ssmod_16fft_main_3_foutvcop_clk", 0x683084, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_3_hsdivout2_clk", "pllfracf_ssmod_16fft_main_3_foutvcop_clk", 0x683088, 0, 7, 0),
+	CLK_DIV_DEFFREQ("usart_programmable_clock_divider_out0", "hsdiv4_16fft_main_1_hsdivout0_clk", 0x1081c0, 0, 2, 0, 0, 48000000),
+	CLK_DIV("hsdiv0_16fft_main_12_hsdivout0_clk", "pllfracf_ssmod_16fft_main_12_foutvcop_clk", 0x68c080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv0_16fft_main_7_hsdivout0_clk", "pllfracf_ssmod_16fft_main_7_foutvcop_clk", 0x687080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv0_16fft_main_8_hsdivout0_clk", "pllfracf_ssmod_16fft_main_8_foutvcop_clk", 0x688080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv1_16fft_main_14_hsdivout0_clk", "pllfracf_ssmod_16fft_main_14_foutvcop_clk", 0x68e080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_0_hsdivout0_clk", "pllfracf_ssmod_16fft_main_0_foutvcop_clk", 0x680080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_0_hsdivout1_clk", "pllfracf_ssmod_16fft_main_0_foutvcop_clk", 0x680084, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_0_hsdivout2_clk", "pllfracf_ssmod_16fft_main_0_foutvcop_clk", 0x680088, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_0_hsdivout3_clk", "pllfracf_ssmod_16fft_main_0_foutvcop_clk", 0x68008c, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_0_hsdivout4_clk", "pllfracf_ssmod_16fft_main_0_foutvcop_clk", 0x680090, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_2_hsdivout0_clk", "pllfracf_ssmod_16fft_main_2_foutvcop_clk", 0x682080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_2_hsdivout1_clk", "pllfracf_ssmod_16fft_main_2_foutvcop_clk", 0x682084, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_3_hsdivout0_clk", "pllfracf_ssmod_16fft_main_3_foutvcop_clk", 0x683080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_3_hsdivout1_clk", "pllfracf_ssmod_16fft_main_3_foutvcop_clk", 0x683084, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_3_hsdivout2_clk", "pllfracf_ssmod_16fft_main_3_foutvcop_clk", 0x683088, 0, 7, 0, 0),
 	CLK_MUX_PLLCTRL("k3_pll_ctrl_wrap_main_0_sysclkout_clk", k3_pll_ctrl_wrap_main_0_sysclkout_clk_parents, 2, 0x410000, 0),
-	CLK_DIV("k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk", "k3_pll_ctrl_wrap_main_0_sysclkout_clk", 0x410118, 0, 5, 0),
-	CLK_DIV("mcu_obsclk_div_out0", "wkup_obsclk_mux_out0", 0x43008000, 8, 4, 0),
+	CLK_DIV("k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk", "k3_pll_ctrl_wrap_main_0_sysclkout_clk", 0x410118, 0, 5, 0, 0),
+	CLK_DIV("mcu_obsclk_div_out0", "wkup_obsclk_mux_out0", 0x43008000, 8, 4, 0, 0),
 	CLK_MUX("mcu_obsclk_outmux_out0", mcu_obsclk_outmux_out0_parents, 2, 0x43008000, 24, 1, 0),
 	CLK_PLL("pllfracf_ssmod_16fft_main_4_foutvcop_clk", "main_pll4_xref_sel_out0", 0x684000, 0),
 	CLK_MUX("clkout_mux_out0", clkout_mux_out0_parents, 2, 0x108010, 0, 1, 0),
@@ -401,14 +402,14 @@ static const struct clk_data clk_list[] = {
 	CLK_MUX("gtc_clk_mux_out0", gtc_clk_mux_out0_parents, 16, 0x108030, 0, 4, 0),
 	CLK_MUX("obsclk1_mux_out0", obsclk1_mux_out0_parents, 4, 0x108004, 0, 2, 0),
 	CLK_MUX("gpmc_fclk_sel_out0", gpmc_fclk_sel_out0_parents, 4, 0x1080d0, 0, 2, 0),
-	CLK_DIV("hsdiv2_16fft_main_4_hsdivout0_clk", "pllfracf_ssmod_16fft_main_4_foutvcop_clk", 0x684080, 0, 7, 0),
-	CLK_DIV("hsdiv2_16fft_main_4_hsdivout2_clk", "pllfracf_ssmod_16fft_main_4_foutvcop_clk", 0x684088, 0, 7, 0),
+	CLK_DIV("hsdiv2_16fft_main_4_hsdivout0_clk", "pllfracf_ssmod_16fft_main_4_foutvcop_clk", 0x684080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv2_16fft_main_4_hsdivout2_clk", "pllfracf_ssmod_16fft_main_4_foutvcop_clk", 0x684088, 0, 7, 0, 0),
 	CLK_MUX("audio_refclko_mux_out0", audio_refclko_mux_out0_parents, 32, 0x1082e0, 0, 5, 0),
 	CLK_MUX("audio_refclko_mux_out1", audio_refclko_mux_out1_parents, 32, 0x1082e4, 0, 5, 0),
 	CLK_MUX("obsclk0_mux_out0", obsclk0_mux_out0_parents, 32, 0x108000, 0, 5, 0),
-	CLK_DIV("osbclk0_div_out0", "obsclk0_mux_out0", 0x108000, 8, 8, 0),
-	CLK_DIV("k3_pll_ctrl_wrap_main_0_chip_div24_clk_clk", "k3_pll_ctrl_wrap_main_0_sysclkout_clk", 0x41011c, 0, 5, 0),
-	CLK_DIV("k3_pll_ctrl_wrap_wkup_0_chip_div24_clk_clk", "k3_pll_ctrl_wrap_wkup_0_sysclkout_clk", 0x4201011c, 0, 5, 0),
+	CLK_DIV("osbclk0_div_out0", "obsclk0_mux_out0", 0x108000, 8, 8, 0, 0),
+	CLK_DIV("k3_pll_ctrl_wrap_main_0_chip_div24_clk_clk", "k3_pll_ctrl_wrap_main_0_sysclkout_clk", 0x41011c, 0, 5, 0, 0),
+	CLK_DIV("k3_pll_ctrl_wrap_wkup_0_chip_div24_clk_clk", "k3_pll_ctrl_wrap_wkup_0_sysclkout_clk", 0x4201011c, 0, 5, 0, 0),
 };
 
 static const struct dev_clk soc_dev_clk_data[] = {
diff --git a/arch/arm/mach-k3/j721e/clk-data.c b/arch/arm/mach-k3/j721e/clk-data.c
index aa3f50a02f59..0d822b2a7f00 100644
--- a/arch/arm/mach-k3/j721e/clk-data.c
+++ b/arch/arm/mach-k3/j721e/clk-data.c
@@ -6,6 +6,7 @@
  *
  * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/
  */
+#include <linux/clk-provider.h>
 #include "k3-clk.h"
 
 static const char * const gluelogic_hfosc0_clkout_parents[] = {
@@ -465,18 +466,18 @@ static const struct clk_data clk_list[] = {
 	CLK_MUX("wkup_fref_clksel_out0", wkup_fref_clksel_out0_parents, 2, 0x43008050, 8, 1, 0),
 	CLK_MUX("main_pll_hfosc_sel_out1", main_pll_hfosc_sel_out1_parents, 2, 0x43008084, 0, 1, 0),
 	CLK_PLL_DEFFREQ("pllfrac2_ssmod_16fft_main_1_foutvcop_clk", "main_pll_hfosc_sel_out1", 0x681000, 0, 1920000000),
-	CLK_DIV("pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk_subdiv", "pllfrac2_ssmod_16fft_main_1_foutvcop_clk", 0x681038, 16, 3, 0),
-	CLK_DIV("pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk", "pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk_subdiv", 0x681038, 24, 3, 0),
+	CLK_DIV("pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk_subdiv", "pllfrac2_ssmod_16fft_main_1_foutvcop_clk", 0x681038, 16, 3, 0, CLK_DIVIDER_ONE_BASED),
+	CLK_DIV("pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk", "pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk_subdiv", 0x681038, 24, 3, 0, CLK_DIVIDER_ONE_BASED),
 	CLK_PLL("pllfrac2_ssmod_16fft_mcu_0_foutvcop_clk", "wkup_fref_clksel_out0", 0x40d00000, 0),
 	CLK_PLL_DEFFREQ("pllfrac2_ssmod_16fft_mcu_1_foutvcop_clk", "wkup_fref_clksel_out0", 0x40d01000, 0, 2400000000),
 	CLK_PLL_DEFFREQ("pllfrac2_ssmod_16fft_mcu_2_foutvcop_clk", "wkup_fref_clksel_out0", 0x40d02000, 0, 2000000000),
-	CLK_DIV("postdiv3_16fft_main_1_hsdivout5_clk", "pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk", 0x681094, 0, 7, 0),
-	CLK_DIV("hsdiv1_16fft_mcu_0_hsdivout0_clk", "pllfrac2_ssmod_16fft_mcu_0_foutvcop_clk", 0x40d00080, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_mcu_1_hsdivout3_clk", "pllfrac2_ssmod_16fft_mcu_1_foutvcop_clk", 0x40d0108c, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_mcu_1_hsdivout4_clk", "pllfrac2_ssmod_16fft_mcu_1_foutvcop_clk", 0x40d01090, 0, 7, 0),
-	CLK_DIV_DEFFREQ("hsdiv4_16fft_mcu_2_hsdivout4_clk", "pllfrac2_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d02090, 0, 7, 0, 166666666),
+	CLK_DIV("postdiv3_16fft_main_1_hsdivout5_clk", "pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk", 0x681094, 0, 7, 0, 0),
+	CLK_DIV("hsdiv1_16fft_mcu_0_hsdivout0_clk", "pllfrac2_ssmod_16fft_mcu_0_foutvcop_clk", 0x40d00080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_mcu_1_hsdivout3_clk", "pllfrac2_ssmod_16fft_mcu_1_foutvcop_clk", 0x40d0108c, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_mcu_1_hsdivout4_clk", "pllfrac2_ssmod_16fft_mcu_1_foutvcop_clk", 0x40d01090, 0, 7, 0, 0),
+	CLK_DIV_DEFFREQ("hsdiv4_16fft_mcu_2_hsdivout4_clk", "pllfrac2_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d02090, 0, 7, 0, 0, 166666666),
 	CLK_MUX_PLLCTRL("k3_pll_ctrl_wrap_wkup_0_sysclkout_clk", k3_pll_ctrl_wrap_wkup_0_sysclkout_clk_parents, 2, 0x42010000, 0),
-	CLK_DIV("k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk", "k3_pll_ctrl_wrap_wkup_0_sysclkout_clk", 0x42010118, 0, 5, 0),
+	CLK_DIV("k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk", "k3_pll_ctrl_wrap_wkup_0_sysclkout_clk", 0x42010118, 0, 5, 0, 0),
 	CLK_MUX("mcu_ospi_ref_clk_sel_out0", mcu_ospi_ref_clk_sel_out0_parents, 2, 0x40f08030, 0, 1, 0),
 	CLK_MUX("mcu_ospi_ref_clk_sel_out1", mcu_ospi_ref_clk_sel_out1_parents, 2, 0x40f08034, 0, 1, 0),
 	CLK_MUX("mcuusart_clk_sel_out0", mcuusart_clk_sel_out0_parents, 2, 0x40f081c0, 0, 1, 0),
@@ -515,18 +516,18 @@ static const struct clk_data clk_list[] = {
 	CLK_FIXED_RATE("ddr32ss_16ffc_ew_dv_wrap_main_0_ddrss_io_ck_n", 0, 0),
 	CLK_FIXED_RATE("emmc8ss_16ffc_main_0_emmcss_io_clk", 0, 0),
 	CLK_FIXED_RATE("emmcsd4ss_main_0_emmcsdss_io_clk_o", 0, 0),
-	CLK_DIV_DEFFREQ("hsdiv4_16fft_main_1_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_1_foutvcop_clk", 0x681080, 0, 7, 0, 192000000),
-	CLK_DIV("hsdiv4_16fft_main_1_hsdivout2_clk", "pllfrac2_ssmod_16fft_main_1_foutvcop_clk", 0x681088, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_mcu_1_hsdivout1_clk", "pllfrac2_ssmod_16fft_mcu_1_foutvcop_clk", 0x40d01084, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_mcu_1_hsdivout2_clk", "pllfrac2_ssmod_16fft_mcu_1_foutvcop_clk", 0x40d01088, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout0_clk", "pllfrac2_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d02080, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout1_clk", "pllfrac2_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d02084, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout2_clk", "pllfrac2_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d02088, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout3_clk", "pllfrac2_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d0208c, 0, 7, 0),
+	CLK_DIV_DEFFREQ("hsdiv4_16fft_main_1_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_1_foutvcop_clk", 0x681080, 0, 7, 0, 0, 192000000),
+	CLK_DIV("hsdiv4_16fft_main_1_hsdivout2_clk", "pllfrac2_ssmod_16fft_main_1_foutvcop_clk", 0x681088, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_mcu_1_hsdivout1_clk", "pllfrac2_ssmod_16fft_mcu_1_foutvcop_clk", 0x40d01084, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_mcu_1_hsdivout2_clk", "pllfrac2_ssmod_16fft_mcu_1_foutvcop_clk", 0x40d01088, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout0_clk", "pllfrac2_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d02080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout1_clk", "pllfrac2_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d02084, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout2_clk", "pllfrac2_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d02088, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout3_clk", "pllfrac2_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d0208c, 0, 7, 0, 0),
 	CLK_FIXED_RATE("j7_wakeup_16ff_wkup_0_wkup_rcosc_32k_clk", 32000, 0),
 	CLK_PLL("pllfrac2_ssmod_16fft_main_0_foutvcop_clk", "main_pll_hfosc_sel_out0", 0x680000, 0),
-	CLK_DIV("pllfrac2_ssmod_16fft_main_0_foutpostdiv_clk_subdiv", "pllfrac2_ssmod_16fft_main_0_foutvcop_clk", 0x680038, 16, 3, 0),
-	CLK_DIV("pllfrac2_ssmod_16fft_main_0_foutpostdiv_clk", "pllfrac2_ssmod_16fft_main_0_foutpostdiv_clk_subdiv", 0x680038, 24, 3, 0),
+	CLK_DIV("pllfrac2_ssmod_16fft_main_0_foutpostdiv_clk_subdiv", "pllfrac2_ssmod_16fft_main_0_foutvcop_clk", 0x680038, 16, 3, 0, CLK_DIVIDER_ONE_BASED),
+	CLK_DIV("pllfrac2_ssmod_16fft_main_0_foutpostdiv_clk", "pllfrac2_ssmod_16fft_main_0_foutpostdiv_clk_subdiv", 0x680038, 24, 3, 0, CLK_DIVIDER_ONE_BASED),
 	CLK_PLL("pllfrac2_ssmod_16fft_main_13_foutvcop_clk", "main_pll_hfosc_sel_out13", 0x68d000, 0),
 	CLK_PLL("pllfrac2_ssmod_16fft_main_14_foutvcop_clk", "main_pll_hfosc_sel_out14", 0x68e000, 0),
 	CLK_PLL("pllfrac2_ssmod_16fft_main_16_foutvcop_clk", "main_pll_hfosc_sel_out16", 0x690000, 0),
@@ -542,41 +543,41 @@ static const struct clk_data clk_list[] = {
 	CLK_PLL("pllfrac2_ssmod_16fft_main_7_foutvcop_clk", "main_pll_hfosc_sel_out7", 0x687000, 0),
 	CLK_PLL("pllfrac2_ssmod_16fft_main_8_foutvcop_clk", "main_pll_hfosc_sel_out8", 0x688000, 0),
 	CLK_PLL("pllfracf_ssmod_16fft_main_12_foutvcop_clk", "main_pll_hfosc_sel_out12", 0x68c000, 0),
-	CLK_DIV("postdiv3_16fft_main_0_hsdivout6_clk", "pllfrac2_ssmod_16fft_main_0_foutpostdiv_clk", 0x680098, 0, 7, 0),
-	CLK_DIV("postdiv3_16fft_main_1_hsdivout7_clk", "pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk", 0x68109c, 0, 7, 0),
+	CLK_DIV("postdiv3_16fft_main_0_hsdivout6_clk", "pllfrac2_ssmod_16fft_main_0_foutpostdiv_clk", 0x680098, 0, 7, 0, 0),
+	CLK_DIV("postdiv3_16fft_main_1_hsdivout7_clk", "pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk", 0x68109c, 0, 7, 0, 0),
 	CLK_MUX("wkup_obsclk_mux_out0", wkup_obsclk_mux_out0_parents, 16, 0x43008000, 0, 4, 0),
 	CLK_MUX("main_pll15_xref_sel_out0", main_pll15_xref_sel_out0_parents, 2, 0x430080bc, 4, 1, 0),
 	CLK_MUX("main_pll24_hfosc_sel_out0", main_pll24_hfosc_sel_out0_parents, 2, 0x430080e0, 0, 1, 0),
 	CLK_MUX("main_pll4_xref_sel_out0", main_pll4_xref_sel_out0_parents, 2, 0x43008090, 4, 1, 0),
 	CLK_MUX("mcu_clkout_mux_out0", mcu_clkout_mux_out0_parents, 2, 0x40f08010, 0, 1, 0),
-	CLK_DIV_DEFFREQ("usart_programmable_clock_divider_out0", "hsdiv4_16fft_main_1_hsdivout0_clk", 0x1081c0, 0, 2, 0, 48000000),
-	CLK_DIV("hsdiv0_16fft_main_12_hsdivout0_clk", "pllfracf_ssmod_16fft_main_12_foutvcop_clk", 0x68c080, 0, 7, 0),
-	CLK_DIV("hsdiv0_16fft_main_6_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_6_foutvcop_clk", 0x686080, 0, 7, 0),
-	CLK_DIV("hsdiv0_16fft_main_7_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_7_foutvcop_clk", 0x687080, 0, 7, 0),
-	CLK_DIV("hsdiv0_16fft_main_8_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_8_foutvcop_clk", 0x688080, 0, 7, 0),
-	CLK_DIV("hsdiv1_16fft_main_14_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_14_foutvcop_clk", 0x68e080, 0, 7, 0),
-	CLK_DIV("hsdiv1_16fft_main_16_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_16_foutvcop_clk", 0x690080, 0, 7, 0),
-	CLK_DIV("hsdiv1_16fft_main_17_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_17_foutvcop_clk", 0x691080, 0, 7, 0),
-	CLK_DIV("hsdiv1_16fft_main_18_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_18_foutvcop_clk", 0x692080, 0, 7, 0),
-	CLK_DIV("hsdiv1_16fft_main_19_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_19_foutvcop_clk", 0x693080, 0, 7, 0),
-	CLK_DIV("hsdiv1_16fft_main_23_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_23_foutvcop_clk", 0x697080, 0, 7, 0),
-	CLK_DIV("hsdiv1_16fft_main_25_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_25_foutvcop_clk", 0x699080, 0, 7, 0),
-	CLK_DIV("hsdiv3_16fft_main_13_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_13_foutvcop_clk", 0x68d080, 0, 7, 0),
-	CLK_DIV("hsdiv3_16fft_main_5_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_5_foutvcop_clk", 0x685080, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_0_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_0_foutvcop_clk", 0x680080, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_0_hsdivout1_clk", "pllfrac2_ssmod_16fft_main_0_foutvcop_clk", 0x680084, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_0_hsdivout2_clk", "pllfrac2_ssmod_16fft_main_0_foutvcop_clk", 0x680088, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_0_hsdivout3_clk", "pllfrac2_ssmod_16fft_main_0_foutvcop_clk", 0x68008c, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_0_hsdivout4_clk", "pllfrac2_ssmod_16fft_main_0_foutvcop_clk", 0x680090, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_2_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_2_foutvcop_clk", 0x682080, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_2_hsdivout1_clk", "pllfrac2_ssmod_16fft_main_2_foutvcop_clk", 0x682084, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_2_hsdivout2_clk", "pllfrac2_ssmod_16fft_main_2_foutvcop_clk", 0x682088, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_3_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_3_foutvcop_clk", 0x683080, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_3_hsdivout1_clk", "pllfrac2_ssmod_16fft_main_3_foutvcop_clk", 0x683084, 0, 7, 0),
-	CLK_DIV("hsdiv4_16fft_main_3_hsdivout2_clk", "pllfrac2_ssmod_16fft_main_3_foutvcop_clk", 0x683088, 0, 7, 0),
+	CLK_DIV_DEFFREQ("usart_programmable_clock_divider_out0", "hsdiv4_16fft_main_1_hsdivout0_clk", 0x1081c0, 0, 2, 0, 0, 48000000),
+	CLK_DIV("hsdiv0_16fft_main_12_hsdivout0_clk", "pllfracf_ssmod_16fft_main_12_foutvcop_clk", 0x68c080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv0_16fft_main_6_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_6_foutvcop_clk", 0x686080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv0_16fft_main_7_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_7_foutvcop_clk", 0x687080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv0_16fft_main_8_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_8_foutvcop_clk", 0x688080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv1_16fft_main_14_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_14_foutvcop_clk", 0x68e080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv1_16fft_main_16_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_16_foutvcop_clk", 0x690080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv1_16fft_main_17_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_17_foutvcop_clk", 0x691080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv1_16fft_main_18_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_18_foutvcop_clk", 0x692080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv1_16fft_main_19_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_19_foutvcop_clk", 0x693080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv1_16fft_main_23_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_23_foutvcop_clk", 0x697080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv1_16fft_main_25_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_25_foutvcop_clk", 0x699080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv3_16fft_main_13_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_13_foutvcop_clk", 0x68d080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv3_16fft_main_5_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_5_foutvcop_clk", 0x685080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_0_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_0_foutvcop_clk", 0x680080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_0_hsdivout1_clk", "pllfrac2_ssmod_16fft_main_0_foutvcop_clk", 0x680084, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_0_hsdivout2_clk", "pllfrac2_ssmod_16fft_main_0_foutvcop_clk", 0x680088, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_0_hsdivout3_clk", "pllfrac2_ssmod_16fft_main_0_foutvcop_clk", 0x68008c, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_0_hsdivout4_clk", "pllfrac2_ssmod_16fft_main_0_foutvcop_clk", 0x680090, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_2_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_2_foutvcop_clk", 0x682080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_2_hsdivout1_clk", "pllfrac2_ssmod_16fft_main_2_foutvcop_clk", 0x682084, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_2_hsdivout2_clk", "pllfrac2_ssmod_16fft_main_2_foutvcop_clk", 0x682088, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_3_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_3_foutvcop_clk", 0x683080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_3_hsdivout1_clk", "pllfrac2_ssmod_16fft_main_3_foutvcop_clk", 0x683084, 0, 7, 0, 0),
+	CLK_DIV("hsdiv4_16fft_main_3_hsdivout2_clk", "pllfrac2_ssmod_16fft_main_3_foutvcop_clk", 0x683088, 0, 7, 0, 0),
 	CLK_MUX_PLLCTRL("k3_pll_ctrl_wrap_main_0_sysclkout_clk", k3_pll_ctrl_wrap_main_0_sysclkout_clk_parents, 2, 0x410000, 0),
-	CLK_DIV("k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk", "k3_pll_ctrl_wrap_main_0_sysclkout_clk", 0x410118, 0, 5, 0),
-	CLK_DIV("mcu_obsclk_div_out0", "wkup_obsclk_mux_out0", 0x43008000, 8, 4, 0),
+	CLK_DIV("k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk", "k3_pll_ctrl_wrap_main_0_sysclkout_clk", 0x410118, 0, 5, 0, 0),
+	CLK_DIV("mcu_obsclk_div_out0", "wkup_obsclk_mux_out0", 0x43008000, 8, 4, 0, 0),
 	CLK_MUX("mcu_obsclk_outmux_out0", mcu_obsclk_outmux_out0_parents, 2, 0x43008000, 24, 1, 0),
 	CLK_MUX("obsclk1_mux_out0", obsclk1_mux_out0_parents, 4, 0x108004, 0, 2, 0),
 	CLK_PLL("pllfrac2_ssmod_16fft_main_15_foutvcop_clk", "main_pll15_xref_sel_out0", 0x68f000, 0),
@@ -586,19 +587,19 @@ static const struct clk_data clk_list[] = {
 	CLK_MUX("emmcsd_refclk_sel_out1", emmcsd_refclk_sel_out1_parents, 4, 0x1080b4, 0, 2, 0),
 	CLK_MUX("gtc_clk_mux_out0", gtc_clk_mux_out0_parents, 16, 0x108030, 0, 4, 0),
 	CLK_MUX("gpmc_fclk_sel_out0", gpmc_fclk_sel_out0_parents, 4, 0x1080d0, 0, 2, 0),
-	CLK_DIV("hsdiv0_16fft_main_24_hsdivout0_clk", "plldeskew_16fft_main_24_foutp_clk", 0x698080, 0, 0, 0),
-	CLK_DIV("hsdiv3_16fft_main_15_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_15_foutvcop_clk", 0x68f080, 0, 7, 0),
-	CLK_DIV("hsdiv3_16fft_main_15_hsdivout2_clk", "pllfrac2_ssmod_16fft_main_15_foutvcop_clk", 0x68f088, 0, 7, 0),
-	CLK_DIV("hsdiv3_16fft_main_4_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_4_foutvcop_clk", 0x684080, 0, 7, 0),
-	CLK_DIV("hsdiv3_16fft_main_4_hsdivout2_clk", "pllfrac2_ssmod_16fft_main_4_foutvcop_clk", 0x684088, 0, 7, 0),
+	CLK_DIV("hsdiv0_16fft_main_24_hsdivout0_clk", "plldeskew_16fft_main_24_foutp_clk", 0x698080, 0, 0, 0, 0),
+	CLK_DIV("hsdiv3_16fft_main_15_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_15_foutvcop_clk", 0x68f080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv3_16fft_main_15_hsdivout2_clk", "pllfrac2_ssmod_16fft_main_15_foutvcop_clk", 0x68f088, 0, 7, 0, 0),
+	CLK_DIV("hsdiv3_16fft_main_4_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_4_foutvcop_clk", 0x684080, 0, 7, 0, 0),
+	CLK_DIV("hsdiv3_16fft_main_4_hsdivout2_clk", "pllfrac2_ssmod_16fft_main_4_foutvcop_clk", 0x684088, 0, 7, 0, 0),
 	CLK_MUX("mcasp_ahclko_mux_out0", mcasp_ahclko_mux_out0_parents, 33, 0x1082e0, 0, 5, 0),
 	CLK_MUX("mcasp_ahclko_mux_out1", mcasp_ahclko_mux_out1_parents, 33, 0x1082e4, 0, 5, 0),
 	CLK_MUX("mcasp_ahclko_mux_out2", mcasp_ahclko_mux_out2_parents, 33, 0x1082e8, 0, 5, 0),
 	CLK_MUX("mcasp_ahclko_mux_out3", mcasp_ahclko_mux_out3_parents, 33, 0x1082ec, 0, 5, 0),
 	CLK_MUX("obsclk0_mux_out0", obsclk0_mux_out0_parents, 32, 0x108000, 0, 5, 0),
-	CLK_DIV("osbclk0_div_out0", "obsclk0_mux_out0", 0x108000, 8, 8, 0),
-	CLK_DIV("k3_pll_ctrl_wrap_main_0_chip_div24_clk_clk", "k3_pll_ctrl_wrap_main_0_sysclkout_clk", 0x41011c, 0, 5, 0),
-	CLK_DIV("k3_pll_ctrl_wrap_wkup_0_chip_div24_clk_clk", "k3_pll_ctrl_wrap_wkup_0_sysclkout_clk", 0x4201011c, 0, 5, 0),
+	CLK_DIV("osbclk0_div_out0", "obsclk0_mux_out0", 0x108000, 8, 8, 0, 0),
+	CLK_DIV("k3_pll_ctrl_wrap_main_0_chip_div24_clk_clk", "k3_pll_ctrl_wrap_main_0_sysclkout_clk", 0x41011c, 0, 5, 0, 0),
+	CLK_DIV("k3_pll_ctrl_wrap_wkup_0_chip_div24_clk_clk", "k3_pll_ctrl_wrap_wkup_0_sysclkout_clk", 0x4201011c, 0, 5, 0, 0),
 };
 
 static const struct dev_clk soc_dev_clk_data[] = {
diff --git a/drivers/clk/ti/clk-k3.c b/drivers/clk/ti/clk-k3.c
index e921894e7a20..e04c57eff252 100644
--- a/drivers/clk/ti/clk-k3.c
+++ b/drivers/clk/ti/clk-k3.c
@@ -2,7 +2,7 @@
 /*
  * Texas Instruments K3 clock driver
  *
- * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/
  *	Tero Kristo <t-kristo@ti.com>
  */
 
@@ -112,7 +112,7 @@ static int ti_clk_probe(struct udevice *dev)
 						   map_physmem(ti_clk_data->clk.div.reg, 0, MAP_NOCACHE),
 						   ti_clk_data->clk.div.shift,
 						   ti_clk_data->clk.div.width,
-						   0);
+						   ti_clk_data->clk.div.div_flags);
 			break;
 		case CLK_TYPE_MUX:
 			name = ti_clk_data->clk.mux.name;
diff --git a/include/k3-clk.h b/include/k3-clk.h
index 073522857980..59c76db86ead 100644
--- a/include/k3-clk.h
+++ b/include/k3-clk.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * (C) Copyright 2020 - Texas Instruments Incorporated - http://www.ti.com
+ * (C) Copyright 2020-2021 Texas Instruments Incorporated - http://www.ti.com
  *      Tero Kristo <t-kristo@ti.com>
  */
 
@@ -54,6 +54,7 @@ struct div_data {
 	u32 flags;
 	int shift;
 	int width;
+	u32 div_flags;
 };
 
 struct hfosc_data {
@@ -105,20 +106,23 @@ struct clk_data {
 		.width = _width, .flags = _flags }			\
 	}
 
-#define CLK_DIV(_name, _parent, _reg, _shift, _width, _flags)	\
-	{							\
-		.type = CLK_TYPE_DIV,				\
-		.clk.div = {.name = _name, .parent = _parent, .reg = _reg, .shift = _shift, .width = _width, .flags = _flags } \
+#define CLK_DIV(_name, _parent, _reg, _shift, _width, _flags, _div_flags)	\
+	{								\
+		.type = CLK_TYPE_DIV,					\
+		.clk.div = {						\
+			.name = _name, .parent = _parent, .reg = _reg,	\
+			.shift = _shift, .width = _width,		\
+			.flags = _flags, .div_flags = _div_flags }	\
 	}
 
-#define CLK_DIV_DEFFREQ(_name, _parent, _reg, _shift, _width, _flags, _freq) \
-	{							\
-		.type = CLK_TYPE_DIV,				\
-		.default_freq = _freq,				\
-		.clk.div = {					\
-			.name = _name, .parent = _parent,	\
-			.reg = _reg, .shift = _shift,		\
-			.width = _width, .flags = _flags }	\
+#define CLK_DIV_DEFFREQ(_name, _parent, _reg, _shift, _width, _flags, _div_flags, _freq) \
+	{								\
+		.type = CLK_TYPE_DIV,					\
+		.default_freq = _freq,					\
+		.clk.div = {						\
+			.name = _name, .parent = _parent, .reg = _reg,	\
+			.shift = _shift, .width = _width,		\
+			.flags = _flags, .div_flags = _div_flags }	\
 	}
 
 #define CLK_PLL(_name, _parent, _reg,  _flags)	\
-- 
2.28.0

Re: [PATCH 3/5] arm: mach-k3: Add note to auto-generated files

[Lokesh Vutla]

On 11/08/21 1:19 am, Dave Gerlach wrote:
> Add a note to the automatically generated clk-data and dev-data files
> for j721e and j7200 to indicate that they are in fact auto-generated and
> should not be hand edited.
> 
> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>

Are there any guidelines/README to do this autogeneration?

Thanks and regards,
Lokesh

> ---
>  arch/arm/mach-k3/j7200/clk-data.c | 2 ++
>  arch/arm/mach-k3/j7200/dev-data.c | 2 ++
>  arch/arm/mach-k3/j721e/clk-data.c | 2 ++
>  arch/arm/mach-k3/j721e/dev-data.c | 2 ++
>  4 files changed, 8 insertions(+)
> 
> diff --git a/arch/arm/mach-k3/j7200/clk-data.c b/arch/arm/mach-k3/j7200/clk-data.c
> index 49145bbfc8cd..649d28b1db0b 100644
> --- a/arch/arm/mach-k3/j7200/clk-data.c
> +++ b/arch/arm/mach-k3/j7200/clk-data.c
> @@ -2,6 +2,8 @@
>  /*
>   * J7200 specific clock platform data
>   *
> + * This file is auto generated. Please do not edit directly.
> + *
>   * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/
>   */
>  #include "k3-clk.h"
> diff --git a/arch/arm/mach-k3/j7200/dev-data.c b/arch/arm/mach-k3/j7200/dev-data.c
> index c68bcc58e9a7..f7b7892da97b 100644
> --- a/arch/arm/mach-k3/j7200/dev-data.c
> +++ b/arch/arm/mach-k3/j7200/dev-data.c
> @@ -2,6 +2,8 @@
>  /*
>   * J7200 specific device platform data
>   *
> + * This file is auto generated. Please do not edit directly.
> + *
>   * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/
>   */
>  #include "k3-dev.h"
> diff --git a/arch/arm/mach-k3/j721e/clk-data.c b/arch/arm/mach-k3/j721e/clk-data.c
> index ff9262d7bcee..aa3f50a02f59 100644
> --- a/arch/arm/mach-k3/j721e/clk-data.c
> +++ b/arch/arm/mach-k3/j721e/clk-data.c
> @@ -2,6 +2,8 @@
>  /*
>   * J721E specific clock platform data
>   *
> + * This file is auto generated. Please do not edit directly.
> + *
>   * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/
>   */
>  #include "k3-clk.h"
> diff --git a/arch/arm/mach-k3/j721e/dev-data.c b/arch/arm/mach-k3/j721e/dev-data.c
> index 96393c713278..a8bc6ce20d1d 100644
> --- a/arch/arm/mach-k3/j721e/dev-data.c
> +++ b/arch/arm/mach-k3/j721e/dev-data.c
> @@ -2,6 +2,8 @@
>  /*
>   * J721E specific device platform data
>   *
> + * This file is auto generated. Please do not edit directly.
> + *
>   * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/
>   */
>  #include "k3-dev.h"
> 

Re: [PATCH 3/5] arm: mach-k3: Add note to auto-generated files

[Dave Gerlach]

Hi,

On 8/11/21 12:12 AM, Lokesh Vutla wrote:
> 
> 
> On 11/08/21 1:19 am, Dave Gerlach wrote:
>> Add a note to the automatically generated clk-data and dev-data files
>> for j721e and j7200 to indicate that they are in fact auto-generated and
>> should not be hand edited.
>>
>> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
> 
> Are there any guidelines/README to do this autogeneration?
> 

Currently there is not.

Regards,
Dave

> Thanks and regards,
> Lokesh
> 
>> ---
>>  arch/arm/mach-k3/j7200/clk-data.c | 2 ++
>>  arch/arm/mach-k3/j7200/dev-data.c | 2 ++
>>  arch/arm/mach-k3/j721e/clk-data.c | 2 ++
>>  arch/arm/mach-k3/j721e/dev-data.c | 2 ++
>>  4 files changed, 8 insertions(+)
>>
>> diff --git a/arch/arm/mach-k3/j7200/clk-data.c b/arch/arm/mach-k3/j7200/clk-data.c
>> index 49145bbfc8cd..649d28b1db0b 100644
>> --- a/arch/arm/mach-k3/j7200/clk-data.c
>> +++ b/arch/arm/mach-k3/j7200/clk-data.c
>> @@ -2,6 +2,8 @@
>>  /*
>>   * J7200 specific clock platform data
>>   *
>> + * This file is auto generated. Please do not edit directly.
>> + *
>>   * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/
>>   */
>>  #include "k3-clk.h"
>> diff --git a/arch/arm/mach-k3/j7200/dev-data.c b/arch/arm/mach-k3/j7200/dev-data.c
>> index c68bcc58e9a7..f7b7892da97b 100644
>> --- a/arch/arm/mach-k3/j7200/dev-data.c
>> +++ b/arch/arm/mach-k3/j7200/dev-data.c
>> @@ -2,6 +2,8 @@
>>  /*
>>   * J7200 specific device platform data
>>   *
>> + * This file is auto generated. Please do not edit directly.
>> + *
>>   * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/
>>   */
>>  #include "k3-dev.h"
>> diff --git a/arch/arm/mach-k3/j721e/clk-data.c b/arch/arm/mach-k3/j721e/clk-data.c
>> index ff9262d7bcee..aa3f50a02f59 100644
>> --- a/arch/arm/mach-k3/j721e/clk-data.c
>> +++ b/arch/arm/mach-k3/j721e/clk-data.c
>> @@ -2,6 +2,8 @@
>>  /*
>>   * J721E specific clock platform data
>>   *
>> + * This file is auto generated. Please do not edit directly.
>> + *
>>   * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/
>>   */
>>  #include "k3-clk.h"
>> diff --git a/arch/arm/mach-k3/j721e/dev-data.c b/arch/arm/mach-k3/j721e/dev-data.c
>> index 96393c713278..a8bc6ce20d1d 100644
>> --- a/arch/arm/mach-k3/j721e/dev-data.c
>> +++ b/arch/arm/mach-k3/j721e/dev-data.c
>> @@ -2,6 +2,8 @@
>>  /*
>>   * J721E specific device platform data
>>   *
>> + * This file is auto generated. Please do not edit directly.
>> + *
>>   * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/
>>   */
>>  #include "k3-dev.h"
>>

Re: [PATCH 3/5] arm: mach-k3: Add note to auto-generated files

[Suman Anna]

Hi Dave,

On 8/11/21 12:12 AM, Lokesh Vutla wrote:
> 
> 
> On 11/08/21 1:19 am, Dave Gerlach wrote:
>> Add a note to the automatically generated clk-data and dev-data files
>> for j721e and j7200 to indicate that they are in fact auto-generated and
>> should not be hand edited.
>>
>> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
> 
> Are there any guidelines/README to do this autogeneration?

And if these are not going to be public, I suggest you rephrase the below
sentence to something like

"This file is auto generated. Please report any issues to <contact>".

> 
> Thanks and regards,
> Lokesh
> 
>> ---
>>  arch/arm/mach-k3/j7200/clk-data.c | 2 ++
>>  arch/arm/mach-k3/j7200/dev-data.c | 2 ++
>>  arch/arm/mach-k3/j721e/clk-data.c | 2 ++
>>  arch/arm/mach-k3/j721e/dev-data.c | 2 ++
>>  4 files changed, 8 insertions(+)
>>
>> diff --git a/arch/arm/mach-k3/j7200/clk-data.c b/arch/arm/mach-k3/j7200/clk-data.c
>> index 49145bbfc8cd..649d28b1db0b 100644
>> --- a/arch/arm/mach-k3/j7200/clk-data.c
>> +++ b/arch/arm/mach-k3/j7200/clk-data.c
>> @@ -2,6 +2,8 @@
>>  /*
>>   * J7200 specific clock platform data
>>   *
>> + * This file is auto generated. Please do not edit directly.
>> + *
>>   * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/

Btw, while you are at this, can we get all of these links to be updated to use
https://

>>   */

I also prefer a blank line between the license comments and the first header
inclusion.

regards
Suman

>>  #include "k3-clk.h"
>> diff --git a/arch/arm/mach-k3/j7200/dev-data.c b/arch/arm/mach-k3/j7200/dev-data.c
>> index c68bcc58e9a7..f7b7892da97b 100644
>> --- a/arch/arm/mach-k3/j7200/dev-data.c
>> +++ b/arch/arm/mach-k3/j7200/dev-data.c
>> @@ -2,6 +2,8 @@
>>  /*
>>   * J7200 specific device platform data
>>   *
>> + * This file is auto generated. Please do not edit directly.
>> + *
>>   * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/
>>   */
>>  #include "k3-dev.h"
>> diff --git a/arch/arm/mach-k3/j721e/clk-data.c b/arch/arm/mach-k3/j721e/clk-data.c
>> index ff9262d7bcee..aa3f50a02f59 100644
>> --- a/arch/arm/mach-k3/j721e/clk-data.c
>> +++ b/arch/arm/mach-k3/j721e/clk-data.c
>> @@ -2,6 +2,8 @@
>>  /*
>>   * J721E specific clock platform data
>>   *
>> + * This file is auto generated. Please do not edit directly.
>> + *
>>   * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/
>>   */
>>  #include "k3-clk.h"
>> diff --git a/arch/arm/mach-k3/j721e/dev-data.c b/arch/arm/mach-k3/j721e/dev-data.c
>> index 96393c713278..a8bc6ce20d1d 100644
>> --- a/arch/arm/mach-k3/j721e/dev-data.c
>> +++ b/arch/arm/mach-k3/j721e/dev-data.c
>> @@ -2,6 +2,8 @@
>>  /*
>>   * J721E specific device platform data
>>   *
>> + * This file is auto generated. Please do not edit directly.
>> + *
>>   * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/
>>   */
>>  #include "k3-dev.h"
>>