[PATCH 0/6] updates to device mapper target measurement using ima

[PATCH 0/6] updates to device mapper target measurement using ima

[Tushar Sugandhi]

There were several improvements suggested for the original device mapper
target measurement patch series [1].

Those improvement suggestions include: 
 - Prefixing hashes for the DM tables being measured in ima log with the
   hash algorithm.
 - Adding version information for DM related events being measured in the
   ima log.
 - Prefixing DM related event names with "dm_".
 - Including the verity target attribute - "root_hash_sig_key_desc"
   in the ima measurement log.

This series incorporates the above suggestions.

This series also has the following fixes:
 - Adding a one-time warning to dmesg during dm_init if
   CONFIG_IMA_DISABLE_HTABLE is set to 'n'.
 - Updating 'integrity' target to remove the duplicate measurement of
   the attribute "mode=%c".
 - Indexing various attributes in 'multipath' target, and adding
   "nr_priority_groups=%u" attribute to the measurements.
 - Fixing 'make htmldocs' warnings in dm-ima.rst.
 - Adding missing documentation for the targets - 'cache', 'integrity',
   'multipath', and 'snapshot' in dm-ima.rst.
 - Updating dm-ima.rst documentation with the grammar for various DM
   events and targets in Backus Naur form.
 - Updating dm-ima.rst documentation to be consistent with the code
   changes described above.

This series is based on top of the following git repo/branch/commit:
 Repo: https://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm.git
 Branch: dm-5.15
 Commit: commit 5a2a33884f0b ("dm crypt: Avoid percpu_counter spinlock contention in crypt_page_alloc()")


[1] https://patchwork.kernel.org/project/dm-devel/cover/20210713004904.8808-1-tusharsu@linux.microsoft.com/

Tushar Sugandhi (6):
  dm ima: prefix dm table hashes in ima log with hash algorithm
  dm ima: add version info to dm related events in ima log
  dm ima: prefix ima event name related to device mapper with dm_
  dm ima: add a warning in dm_init if duplicate ima events are not
    measured
  dm ima: update dm target attributes for ima measurements
  dm ima: update dm documentation for ima measurement support

 .../admin-guide/device-mapper/dm-ima.rst      | 827 +++++++++++++-----
 drivers/md/dm-ima.c                           |  94 +-
 drivers/md/dm-ima.h                           |  10 +
 drivers/md/dm-integrity.c                     |   1 -
 drivers/md/dm-mpath.c                         |  26 +-
 drivers/md/dm-verity-target.c                 |   2 +
 drivers/md/dm.c                               |   6 +
 7 files changed, 724 insertions(+), 242 deletions(-)

-- 
2.32.0

[dm-devel] [PATCH 0/6] updates to device mapper target measurement using ima

[Tushar Sugandhi]

There were several improvements suggested for the original device mapper
target measurement patch series [1].

Those improvement suggestions include: 
 - Prefixing hashes for the DM tables being measured in ima log with the
   hash algorithm.
 - Adding version information for DM related events being measured in the
   ima log.
 - Prefixing DM related event names with "dm_".
 - Including the verity target attribute - "root_hash_sig_key_desc"
   in the ima measurement log.

This series incorporates the above suggestions.

This series also has the following fixes:
 - Adding a one-time warning to dmesg during dm_init if
   CONFIG_IMA_DISABLE_HTABLE is set to 'n'.
 - Updating 'integrity' target to remove the duplicate measurement of
   the attribute "mode=%c".
 - Indexing various attributes in 'multipath' target, and adding
   "nr_priority_groups=%u" attribute to the measurements.
 - Fixing 'make htmldocs' warnings in dm-ima.rst.
 - Adding missing documentation for the targets - 'cache', 'integrity',
   'multipath', and 'snapshot' in dm-ima.rst.
 - Updating dm-ima.rst documentation with the grammar for various DM
   events and targets in Backus Naur form.
 - Updating dm-ima.rst documentation to be consistent with the code
   changes described above.

This series is based on top of the following git repo/branch/commit:
 Repo: https://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm.git
 Branch: dm-5.15
 Commit: commit 5a2a33884f0b ("dm crypt: Avoid percpu_counter spinlock contention in crypt_page_alloc()")


[1] https://patchwork.kernel.org/project/dm-devel/cover/20210713004904.8808-1-tusharsu@linux.microsoft.com/

Tushar Sugandhi (6):
  dm ima: prefix dm table hashes in ima log with hash algorithm
  dm ima: add version info to dm related events in ima log
  dm ima: prefix ima event name related to device mapper with dm_
  dm ima: add a warning in dm_init if duplicate ima events are not
    measured
  dm ima: update dm target attributes for ima measurements
  dm ima: update dm documentation for ima measurement support

 .../admin-guide/device-mapper/dm-ima.rst      | 827 +++++++++++++-----
 drivers/md/dm-ima.c                           |  94 +-
 drivers/md/dm-ima.h                           |  10 +
 drivers/md/dm-integrity.c                     |   1 -
 drivers/md/dm-mpath.c                         |  26 +-
 drivers/md/dm-verity-target.c                 |   2 +
 drivers/md/dm.c                               |   6 +
 7 files changed, 724 insertions(+), 242 deletions(-)

-- 
2.32.0


--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

[PATCH 1/6] dm ima: prefix dm table hashes in ima log with hash algorithm

[Tushar Sugandhi]

The active/inactive table hashes measured in the ima log do not contain
the information about hash algorithm.  This information is useful for the
attestation servers to recreate the hashes and compare them with the ones
present in the ima log to verify the table contents.

Prefix the table hashes in various DM events in ima log with the hash
algorithm used to compute those hashes.

Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
---
 drivers/md/dm-ima.c | 15 ++++++++++++---
 drivers/md/dm-ima.h |  1 +
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/md/dm-ima.c b/drivers/md/dm-ima.c
index 91ea4a7202ab..4bab35c8f0c7 100644
--- a/drivers/md/dm-ima.c
+++ b/drivers/md/dm-ima.c
@@ -186,6 +186,12 @@ void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_fl
 	struct crypto_shash *tfm = NULL;
 	u8 *digest = NULL;
 	bool noio = false;
+	const size_t hash_alg_prefix_len = strlen(DM_IMA_TABLE_HASH_ALG) + 1;
+				/*
+				 * +1 for the additional char (':'), when prefixing
+				 * the hash value with the hash algorithm name.
+				 * e.g. sha256:<hash_value>.
+				 */
 
 	ima_buf = dm_ima_alloc(DM_IMA_MEASUREMENT_BUF_LEN, GFP_KERNEL, noio);
 	if (!ima_buf)
@@ -204,7 +210,7 @@ void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_fl
 	if (dm_ima_alloc_and_copy_device_data(table->md, &device_data_buf, num_targets, noio))
 		goto error;
 
-	tfm = crypto_alloc_shash("sha256", 0, 0);
+	tfm = crypto_alloc_shash(DM_IMA_TABLE_HASH_ALG, 0, 0);
 	if (IS_ERR(tfm))
 		goto error;
 
@@ -315,12 +321,15 @@ void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_fl
 	if (r < 0)
 		goto error;
 
-	digest_buf = dm_ima_alloc((digest_size*2)+1, GFP_KERNEL, noio);
+	digest_buf = dm_ima_alloc((digest_size*2) + hash_alg_prefix_len + 1, GFP_KERNEL, noio);
+
 	if (!digest_buf)
 		goto error;
 
+	snprintf(digest_buf, hash_alg_prefix_len + 1, "%s:", DM_IMA_TABLE_HASH_ALG);
+
 	for (i = 0; i < digest_size; i++)
-		snprintf((digest_buf+(i*2)), 3, "%02x", digest[i]);
+		snprintf((digest_buf + hash_alg_prefix_len + (i*2)), 3, "%02x", digest[i]);
 
 	if (table->md->ima.active_table.hash != table->md->ima.inactive_table.hash)
 		kfree(table->md->ima.inactive_table.hash);
diff --git a/drivers/md/dm-ima.h b/drivers/md/dm-ima.h
index 6e6f18bf05b4..0731a51565d6 100644
--- a/drivers/md/dm-ima.h
+++ b/drivers/md/dm-ima.h
@@ -16,6 +16,7 @@
 #define DM_IMA_TARGET_METADATA_BUF_LEN	128
 #define DM_IMA_TARGET_DATA_BUF_LEN	2048
 #define DM_IMA_DEVICE_CAPACITY_BUF_LEN	128
+#define DM_IMA_TABLE_HASH_ALG		"sha256"
 
 #ifdef CONFIG_IMA
 
-- 
2.32.0

[dm-devel] [PATCH 1/6] dm ima: prefix dm table hashes in ima log with hash algorithm

[Tushar Sugandhi]

The active/inactive table hashes measured in the ima log do not contain
the information about hash algorithm.  This information is useful for the
attestation servers to recreate the hashes and compare them with the ones
present in the ima log to verify the table contents.

Prefix the table hashes in various DM events in ima log with the hash
algorithm used to compute those hashes.

Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
---
 drivers/md/dm-ima.c | 15 ++++++++++++---
 drivers/md/dm-ima.h |  1 +
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/md/dm-ima.c b/drivers/md/dm-ima.c
index 91ea4a7202ab..4bab35c8f0c7 100644
--- a/drivers/md/dm-ima.c
+++ b/drivers/md/dm-ima.c
@@ -186,6 +186,12 @@ void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_fl
 	struct crypto_shash *tfm = NULL;
 	u8 *digest = NULL;
 	bool noio = false;
+	const size_t hash_alg_prefix_len = strlen(DM_IMA_TABLE_HASH_ALG) + 1;
+				/*
+				 * +1 for the additional char (':'), when prefixing
+				 * the hash value with the hash algorithm name.
+				 * e.g. sha256:<hash_value>.
+				 */
 
 	ima_buf = dm_ima_alloc(DM_IMA_MEASUREMENT_BUF_LEN, GFP_KERNEL, noio);
 	if (!ima_buf)
@@ -204,7 +210,7 @@ void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_fl
 	if (dm_ima_alloc_and_copy_device_data(table->md, &device_data_buf, num_targets, noio))
 		goto error;
 
-	tfm = crypto_alloc_shash("sha256", 0, 0);
+	tfm = crypto_alloc_shash(DM_IMA_TABLE_HASH_ALG, 0, 0);
 	if (IS_ERR(tfm))
 		goto error;
 
@@ -315,12 +321,15 @@ void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_fl
 	if (r < 0)
 		goto error;
 
-	digest_buf = dm_ima_alloc((digest_size*2)+1, GFP_KERNEL, noio);
+	digest_buf = dm_ima_alloc((digest_size*2) + hash_alg_prefix_len + 1, GFP_KERNEL, noio);
+
 	if (!digest_buf)
 		goto error;
 
+	snprintf(digest_buf, hash_alg_prefix_len + 1, "%s:", DM_IMA_TABLE_HASH_ALG);
+
 	for (i = 0; i < digest_size; i++)
-		snprintf((digest_buf+(i*2)), 3, "%02x", digest[i]);
+		snprintf((digest_buf + hash_alg_prefix_len + (i*2)), 3, "%02x", digest[i]);
 
 	if (table->md->ima.active_table.hash != table->md->ima.inactive_table.hash)
 		kfree(table->md->ima.inactive_table.hash);
diff --git a/drivers/md/dm-ima.h b/drivers/md/dm-ima.h
index 6e6f18bf05b4..0731a51565d6 100644
--- a/drivers/md/dm-ima.h
+++ b/drivers/md/dm-ima.h
@@ -16,6 +16,7 @@
 #define DM_IMA_TARGET_METADATA_BUF_LEN	128
 #define DM_IMA_TARGET_DATA_BUF_LEN	2048
 #define DM_IMA_DEVICE_CAPACITY_BUF_LEN	128
+#define DM_IMA_TABLE_HASH_ALG		"sha256"
 
 #ifdef CONFIG_IMA
 
-- 
2.32.0


--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

[PATCH 2/6] dm ima: add version info to dm related events in ima log

[Tushar Sugandhi]

The DM events present in the ima log contain various attributes in the
key=value format.  The attributes' names/values may change in future,
and new attributes may also get added.  The attestation server needs
some versioning to determine which attributes are supported and are
expected in the ima log.

Add version information to the DM events present in the ima log to
help attestation servers to correctly process the attributes across
different versions.

Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
---
 drivers/md/dm-ima.c | 60 ++++++++++++++++++++++++++++++++++++---------
 drivers/md/dm-ima.h |  9 +++++++
 2 files changed, 57 insertions(+), 12 deletions(-)

diff --git a/drivers/md/dm-ima.c b/drivers/md/dm-ima.c
index 4bab35c8f0c7..458a3a1d78bc 100644
--- a/drivers/md/dm-ima.c
+++ b/drivers/md/dm-ima.c
@@ -168,6 +168,7 @@ static int dm_ima_alloc_and_copy_capacity_str(struct mapped_device *md, char **c
 void dm_ima_reset_data(struct mapped_device *md)
 {
 	memset(&(md->ima), 0, sizeof(md->ima));
+	md->ima.dm_version_str_len = strlen(DM_IMA_VERSION_STR);
 }
 
 /*
@@ -224,6 +225,9 @@ void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_fl
 	if (r)
 		goto error;
 
+	memcpy(ima_buf + l, DM_IMA_VERSION_STR, table->md->ima.dm_version_str_len);
+	l += table->md->ima.dm_version_str_len;
+
 	device_data_buf_len = strlen(device_data_buf);
 	memcpy(ima_buf + l, device_data_buf, device_data_buf_len);
 	l += device_data_buf_len;
@@ -281,6 +285,9 @@ void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_fl
 			 * prefix, so that multiple records from the same table_load for
 			 * a given device can be linked together.
 			 */
+			memcpy(ima_buf + l, DM_IMA_VERSION_STR, table->md->ima.dm_version_str_len);
+			l += table->md->ima.dm_version_str_len;
+
 			memcpy(ima_buf + l, device_data_buf, device_data_buf_len);
 			l += device_data_buf_len;
 
@@ -368,6 +375,7 @@ void dm_ima_measure_on_device_resume(struct mapped_device *md, bool swap)
 	unsigned int active_len = strlen(active), capacity_len = 0;
 	unsigned int l = 0;
 	bool noio = true;
+	bool nodata = true;
 	int r;
 
 	device_table_data = dm_ima_alloc(DM_IMA_DEVICE_BUF_LEN, GFP_KERNEL, noio);
@@ -378,6 +386,9 @@ void dm_ima_measure_on_device_resume(struct mapped_device *md, bool swap)
 	if (r)
 		goto error;
 
+	memcpy(device_table_data + l, DM_IMA_VERSION_STR, md->ima.dm_version_str_len);
+	l += md->ima.dm_version_str_len;
+
 	if (swap) {
 		if (md->ima.active_table.hash != md->ima.inactive_table.hash)
 			kfree(md->ima.active_table.hash);
@@ -413,8 +424,11 @@ void dm_ima_measure_on_device_resume(struct mapped_device *md, bool swap)
 	}
 
 	if (md->ima.active_table.device_metadata) {
-		l = md->ima.active_table.device_metadata_len;
-		memcpy(device_table_data, md->ima.active_table.device_metadata, l);
+		memcpy(device_table_data + l, md->ima.active_table.device_metadata,
+		       md->ima.active_table.device_metadata_len);
+		l += md->ima.active_table.device_metadata_len;
+
+		nodata = false;
 	}
 
 	if (md->ima.active_table.hash) {
@@ -427,16 +441,18 @@ void dm_ima_measure_on_device_resume(struct mapped_device *md, bool swap)
 
 		memcpy(device_table_data + l, ";", 1);
 		l++;
+
+		nodata = false;
 	}
 
-	if (!l) {
+	if (nodata) {
 		r = dm_ima_alloc_and_copy_name_uuid(md, &dev_name, &dev_uuid, noio);
 		if (r)
 			goto error;
 
 		scnprintf(device_table_data, DM_IMA_DEVICE_BUF_LEN,
-			  "name=%s,uuid=%s;device_resume=no_data;",
-			  dev_name, dev_uuid);
+			  "%sname=%s,uuid=%s;device_resume=no_data;",
+			  DM_IMA_VERSION_STR, dev_name, dev_uuid);
 		l += strlen(device_table_data);
 
 	}
@@ -473,6 +489,7 @@ void dm_ima_measure_on_device_remove(struct mapped_device *md, bool remove_all)
 	unsigned int capacity_len = 0;
 	unsigned int l = 0;
 	bool noio = true;
+	bool nodata = true;
 	int r;
 
 	device_table_data = dm_ima_alloc(DM_IMA_DEVICE_BUF_LEN*2, GFP_KERNEL, noio);
@@ -485,6 +502,9 @@ void dm_ima_measure_on_device_remove(struct mapped_device *md, bool remove_all)
 		goto exit;
 	}
 
+	memcpy(device_table_data + l, DM_IMA_VERSION_STR, md->ima.dm_version_str_len);
+	l += md->ima.dm_version_str_len;
+
 	if (md->ima.active_table.device_metadata) {
 		memcpy(device_table_data + l, device_active_str, device_active_len);
 		l += device_active_len;
@@ -492,6 +512,8 @@ void dm_ima_measure_on_device_remove(struct mapped_device *md, bool remove_all)
 		memcpy(device_table_data + l, md->ima.active_table.device_metadata,
 		       md->ima.active_table.device_metadata_len);
 		l += md->ima.active_table.device_metadata_len;
+
+		nodata = false;
 	}
 
 	if (md->ima.inactive_table.device_metadata) {
@@ -501,6 +523,8 @@ void dm_ima_measure_on_device_remove(struct mapped_device *md, bool remove_all)
 		memcpy(device_table_data + l, md->ima.inactive_table.device_metadata,
 		       md->ima.inactive_table.device_metadata_len);
 		l += md->ima.inactive_table.device_metadata_len;
+
+		nodata = false;
 	}
 
 	if (md->ima.active_table.hash) {
@@ -513,6 +537,8 @@ void dm_ima_measure_on_device_remove(struct mapped_device *md, bool remove_all)
 
 		memcpy(device_table_data + l, ",", 1);
 		l++;
+
+		nodata = false;
 	}
 
 	if (md->ima.inactive_table.hash) {
@@ -525,19 +551,21 @@ void dm_ima_measure_on_device_remove(struct mapped_device *md, bool remove_all)
 
 		memcpy(device_table_data + l, ",", 1);
 		l++;
+
+		nodata = false;
 	}
 	/*
 	 * In case both active and inactive tables, and corresponding
 	 * device metadata is cleared/missing - record the name and uuid
 	 * in IMA measurements.
 	 */
-	if (!l) {
+	if (nodata) {
 		if (dm_ima_alloc_and_copy_name_uuid(md, &dev_name, &dev_uuid, noio))
 			goto error;
 
 		scnprintf(device_table_data, DM_IMA_DEVICE_BUF_LEN,
-			  "name=%s,uuid=%s;device_remove=no_data;",
-			  dev_name, dev_uuid);
+			  "%sname=%s,uuid=%s;device_remove=no_data;",
+			  DM_IMA_VERSION_STR, dev_name, dev_uuid);
 		l += strlen(device_table_data);
 	}
 
@@ -583,6 +611,7 @@ void dm_ima_measure_on_table_clear(struct mapped_device *md, bool new_map)
 	char inactive_str[] = "inactive_table_hash=";
 	unsigned int inactive_len = strlen(inactive_str);
 	bool noio = true;
+	bool nodata = true;
 	int r;
 
 	device_table_data = dm_ima_alloc(DM_IMA_DEVICE_BUF_LEN, GFP_KERNEL, noio);
@@ -593,6 +622,9 @@ void dm_ima_measure_on_table_clear(struct mapped_device *md, bool new_map)
 	if (r)
 		goto error1;
 
+	memcpy(device_table_data + l, DM_IMA_VERSION_STR, md->ima.dm_version_str_len);
+	l += md->ima.dm_version_str_len;
+
 	if (md->ima.inactive_table.device_metadata_len &&
 	    md->ima.inactive_table.hash_len) {
 		memcpy(device_table_data + l, md->ima.inactive_table.device_metadata,
@@ -609,14 +641,17 @@ void dm_ima_measure_on_table_clear(struct mapped_device *md, bool new_map)
 
 		memcpy(device_table_data + l, ";", 1);
 		l++;
+
+		nodata = false;
 	}
 
-	if (!l) {
+	if (nodata) {
 		if (dm_ima_alloc_and_copy_name_uuid(md, &dev_name, &dev_uuid, noio))
 			goto error2;
 
 		scnprintf(device_table_data, DM_IMA_DEVICE_BUF_LEN,
-			  "name=%s,uuid=%s;table_clear=no_data;", dev_name, dev_uuid);
+			  "%sname=%s,uuid=%s;table_clear=no_data;",
+			   DM_IMA_VERSION_STR, dev_name, dev_uuid);
 		l += strlen(device_table_data);
 	}
 
@@ -695,8 +730,9 @@ void dm_ima_measure_on_device_rename(struct mapped_device *md)
 	md->ima.active_table.device_metadata = new_device_data;
 	md->ima.active_table.device_metadata_len = strlen(new_device_data);
 
-	scnprintf(combined_device_data, DM_IMA_DEVICE_BUF_LEN * 2, "%snew_name=%s,new_uuid=%s;%s",
-		  old_device_data, new_dev_name, new_dev_uuid, capacity_str);
+	scnprintf(combined_device_data, DM_IMA_DEVICE_BUF_LEN * 2,
+		  "%s%snew_name=%s,new_uuid=%s;%s", DM_IMA_VERSION_STR, old_device_data,
+		  new_dev_name, new_dev_uuid, capacity_str);
 
 	dm_ima_measure_data("device_rename", combined_device_data, strlen(combined_device_data),
 			    noio);
diff --git a/drivers/md/dm-ima.h b/drivers/md/dm-ima.h
index 0731a51565d6..b8c3b614670b 100644
--- a/drivers/md/dm-ima.h
+++ b/drivers/md/dm-ima.h
@@ -18,6 +18,14 @@
 #define DM_IMA_DEVICE_CAPACITY_BUF_LEN	128
 #define DM_IMA_TABLE_HASH_ALG		"sha256"
 
+#define __dm_ima_stringify(s) #s
+#define __dm_ima_str(s) __dm_ima_stringify(s)
+
+#define DM_IMA_VERSION_STR "dm_version="	\
+	__dm_ima_str(DM_VERSION_MAJOR) "."	\
+	__dm_ima_str(DM_VERSION_MINOR) "."	\
+	__dm_ima_str(DM_VERSION_PATCHLEVEL) ";"
+
 #ifdef CONFIG_IMA
 
 struct dm_ima_device_table_metadata {
@@ -46,6 +54,7 @@ struct dm_ima_device_table_metadata {
 struct dm_ima_measurements {
 	struct dm_ima_device_table_metadata active_table;
 	struct dm_ima_device_table_metadata inactive_table;
+	unsigned int dm_version_str_len;
 };
 
 void dm_ima_reset_data(struct mapped_device *md);
-- 
2.32.0

[dm-devel] [PATCH 2/6] dm ima: add version info to dm related events in ima log

[Tushar Sugandhi]

The DM events present in the ima log contain various attributes in the
key=value format.  The attributes' names/values may change in future,
and new attributes may also get added.  The attestation server needs
some versioning to determine which attributes are supported and are
expected in the ima log.

Add version information to the DM events present in the ima log to
help attestation servers to correctly process the attributes across
different versions.

Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
---
 drivers/md/dm-ima.c | 60 ++++++++++++++++++++++++++++++++++++---------
 drivers/md/dm-ima.h |  9 +++++++
 2 files changed, 57 insertions(+), 12 deletions(-)

diff --git a/drivers/md/dm-ima.c b/drivers/md/dm-ima.c
index 4bab35c8f0c7..458a3a1d78bc 100644
--- a/drivers/md/dm-ima.c
+++ b/drivers/md/dm-ima.c
@@ -168,6 +168,7 @@ static int dm_ima_alloc_and_copy_capacity_str(struct mapped_device *md, char **c
 void dm_ima_reset_data(struct mapped_device *md)
 {
 	memset(&(md->ima), 0, sizeof(md->ima));
+	md->ima.dm_version_str_len = strlen(DM_IMA_VERSION_STR);
 }
 
 /*
@@ -224,6 +225,9 @@ void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_fl
 	if (r)
 		goto error;
 
+	memcpy(ima_buf + l, DM_IMA_VERSION_STR, table->md->ima.dm_version_str_len);
+	l += table->md->ima.dm_version_str_len;
+
 	device_data_buf_len = strlen(device_data_buf);
 	memcpy(ima_buf + l, device_data_buf, device_data_buf_len);
 	l += device_data_buf_len;
@@ -281,6 +285,9 @@ void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_fl
 			 * prefix, so that multiple records from the same table_load for
 			 * a given device can be linked together.
 			 */
+			memcpy(ima_buf + l, DM_IMA_VERSION_STR, table->md->ima.dm_version_str_len);
+			l += table->md->ima.dm_version_str_len;
+
 			memcpy(ima_buf + l, device_data_buf, device_data_buf_len);
 			l += device_data_buf_len;
 
@@ -368,6 +375,7 @@ void dm_ima_measure_on_device_resume(struct mapped_device *md, bool swap)
 	unsigned int active_len = strlen(active), capacity_len = 0;
 	unsigned int l = 0;
 	bool noio = true;
+	bool nodata = true;
 	int r;
 
 	device_table_data = dm_ima_alloc(DM_IMA_DEVICE_BUF_LEN, GFP_KERNEL, noio);
@@ -378,6 +386,9 @@ void dm_ima_measure_on_device_resume(struct mapped_device *md, bool swap)
 	if (r)
 		goto error;
 
+	memcpy(device_table_data + l, DM_IMA_VERSION_STR, md->ima.dm_version_str_len);
+	l += md->ima.dm_version_str_len;
+
 	if (swap) {
 		if (md->ima.active_table.hash != md->ima.inactive_table.hash)
 			kfree(md->ima.active_table.hash);
@@ -413,8 +424,11 @@ void dm_ima_measure_on_device_resume(struct mapped_device *md, bool swap)
 	}
 
 	if (md->ima.active_table.device_metadata) {
-		l = md->ima.active_table.device_metadata_len;
-		memcpy(device_table_data, md->ima.active_table.device_metadata, l);
+		memcpy(device_table_data + l, md->ima.active_table.device_metadata,
+		       md->ima.active_table.device_metadata_len);
+		l += md->ima.active_table.device_metadata_len;
+
+		nodata = false;
 	}
 
 	if (md->ima.active_table.hash) {
@@ -427,16 +441,18 @@ void dm_ima_measure_on_device_resume(struct mapped_device *md, bool swap)
 
 		memcpy(device_table_data + l, ";", 1);
 		l++;
+
+		nodata = false;
 	}
 
-	if (!l) {
+	if (nodata) {
 		r = dm_ima_alloc_and_copy_name_uuid(md, &dev_name, &dev_uuid, noio);
 		if (r)
 			goto error;
 
 		scnprintf(device_table_data, DM_IMA_DEVICE_BUF_LEN,
-			  "name=%s,uuid=%s;device_resume=no_data;",
-			  dev_name, dev_uuid);
+			  "%sname=%s,uuid=%s;device_resume=no_data;",
+			  DM_IMA_VERSION_STR, dev_name, dev_uuid);
 		l += strlen(device_table_data);
 
 	}
@@ -473,6 +489,7 @@ void dm_ima_measure_on_device_remove(struct mapped_device *md, bool remove_all)
 	unsigned int capacity_len = 0;
 	unsigned int l = 0;
 	bool noio = true;
+	bool nodata = true;
 	int r;
 
 	device_table_data = dm_ima_alloc(DM_IMA_DEVICE_BUF_LEN*2, GFP_KERNEL, noio);
@@ -485,6 +502,9 @@ void dm_ima_measure_on_device_remove(struct mapped_device *md, bool remove_all)
 		goto exit;
 	}
 
+	memcpy(device_table_data + l, DM_IMA_VERSION_STR, md->ima.dm_version_str_len);
+	l += md->ima.dm_version_str_len;
+
 	if (md->ima.active_table.device_metadata) {
 		memcpy(device_table_data + l, device_active_str, device_active_len);
 		l += device_active_len;
@@ -492,6 +512,8 @@ void dm_ima_measure_on_device_remove(struct mapped_device *md, bool remove_all)
 		memcpy(device_table_data + l, md->ima.active_table.device_metadata,
 		       md->ima.active_table.device_metadata_len);
 		l += md->ima.active_table.device_metadata_len;
+
+		nodata = false;
 	}
 
 	if (md->ima.inactive_table.device_metadata) {
@@ -501,6 +523,8 @@ void dm_ima_measure_on_device_remove(struct mapped_device *md, bool remove_all)
 		memcpy(device_table_data + l, md->ima.inactive_table.device_metadata,
 		       md->ima.inactive_table.device_metadata_len);
 		l += md->ima.inactive_table.device_metadata_len;
+
+		nodata = false;
 	}
 
 	if (md->ima.active_table.hash) {
@@ -513,6 +537,8 @@ void dm_ima_measure_on_device_remove(struct mapped_device *md, bool remove_all)
 
 		memcpy(device_table_data + l, ",", 1);
 		l++;
+
+		nodata = false;
 	}
 
 	if (md->ima.inactive_table.hash) {
@@ -525,19 +551,21 @@ void dm_ima_measure_on_device_remove(struct mapped_device *md, bool remove_all)
 
 		memcpy(device_table_data + l, ",", 1);
 		l++;
+
+		nodata = false;
 	}
 	/*
 	 * In case both active and inactive tables, and corresponding
 	 * device metadata is cleared/missing - record the name and uuid
 	 * in IMA measurements.
 	 */
-	if (!l) {
+	if (nodata) {
 		if (dm_ima_alloc_and_copy_name_uuid(md, &dev_name, &dev_uuid, noio))
 			goto error;
 
 		scnprintf(device_table_data, DM_IMA_DEVICE_BUF_LEN,
-			  "name=%s,uuid=%s;device_remove=no_data;",
-			  dev_name, dev_uuid);
+			  "%sname=%s,uuid=%s;device_remove=no_data;",
+			  DM_IMA_VERSION_STR, dev_name, dev_uuid);
 		l += strlen(device_table_data);
 	}
 
@@ -583,6 +611,7 @@ void dm_ima_measure_on_table_clear(struct mapped_device *md, bool new_map)
 	char inactive_str[] = "inactive_table_hash=";
 	unsigned int inactive_len = strlen(inactive_str);
 	bool noio = true;
+	bool nodata = true;
 	int r;
 
 	device_table_data = dm_ima_alloc(DM_IMA_DEVICE_BUF_LEN, GFP_KERNEL, noio);
@@ -593,6 +622,9 @@ void dm_ima_measure_on_table_clear(struct mapped_device *md, bool new_map)
 	if (r)
 		goto error1;
 
+	memcpy(device_table_data + l, DM_IMA_VERSION_STR, md->ima.dm_version_str_len);
+	l += md->ima.dm_version_str_len;
+
 	if (md->ima.inactive_table.device_metadata_len &&
 	    md->ima.inactive_table.hash_len) {
 		memcpy(device_table_data + l, md->ima.inactive_table.device_metadata,
@@ -609,14 +641,17 @@ void dm_ima_measure_on_table_clear(struct mapped_device *md, bool new_map)
 
 		memcpy(device_table_data + l, ";", 1);
 		l++;
+
+		nodata = false;
 	}
 
-	if (!l) {
+	if (nodata) {
 		if (dm_ima_alloc_and_copy_name_uuid(md, &dev_name, &dev_uuid, noio))
 			goto error2;
 
 		scnprintf(device_table_data, DM_IMA_DEVICE_BUF_LEN,
-			  "name=%s,uuid=%s;table_clear=no_data;", dev_name, dev_uuid);
+			  "%sname=%s,uuid=%s;table_clear=no_data;",
+			   DM_IMA_VERSION_STR, dev_name, dev_uuid);
 		l += strlen(device_table_data);
 	}
 
@@ -695,8 +730,9 @@ void dm_ima_measure_on_device_rename(struct mapped_device *md)
 	md->ima.active_table.device_metadata = new_device_data;
 	md->ima.active_table.device_metadata_len = strlen(new_device_data);
 
-	scnprintf(combined_device_data, DM_IMA_DEVICE_BUF_LEN * 2, "%snew_name=%s,new_uuid=%s;%s",
-		  old_device_data, new_dev_name, new_dev_uuid, capacity_str);
+	scnprintf(combined_device_data, DM_IMA_DEVICE_BUF_LEN * 2,
+		  "%s%snew_name=%s,new_uuid=%s;%s", DM_IMA_VERSION_STR, old_device_data,
+		  new_dev_name, new_dev_uuid, capacity_str);
 
 	dm_ima_measure_data("device_rename", combined_device_data, strlen(combined_device_data),
 			    noio);
diff --git a/drivers/md/dm-ima.h b/drivers/md/dm-ima.h
index 0731a51565d6..b8c3b614670b 100644
--- a/drivers/md/dm-ima.h
+++ b/drivers/md/dm-ima.h
@@ -18,6 +18,14 @@
 #define DM_IMA_DEVICE_CAPACITY_BUF_LEN	128
 #define DM_IMA_TABLE_HASH_ALG		"sha256"
 
+#define __dm_ima_stringify(s) #s
+#define __dm_ima_str(s) __dm_ima_stringify(s)
+
+#define DM_IMA_VERSION_STR "dm_version="	\
+	__dm_ima_str(DM_VERSION_MAJOR) "."	\
+	__dm_ima_str(DM_VERSION_MINOR) "."	\
+	__dm_ima_str(DM_VERSION_PATCHLEVEL) ";"
+
 #ifdef CONFIG_IMA
 
 struct dm_ima_device_table_metadata {
@@ -46,6 +54,7 @@ struct dm_ima_device_table_metadata {
 struct dm_ima_measurements {
 	struct dm_ima_device_table_metadata active_table;
 	struct dm_ima_device_table_metadata inactive_table;
+	unsigned int dm_version_str_len;
 };
 
 void dm_ima_reset_data(struct mapped_device *md);
-- 
2.32.0


--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

[PATCH 3/6] dm ima: prefix ima event name related to device mapper with dm_

[Tushar Sugandhi]

The event names for the DM events recorded in the ima log do not contain
any information to indicate the events are part of the DM devices/targets.

Prefix the event names for DM events with "dm_" to indicate that they
are part of device-mapper.

Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Suggested-by: Thore Sommer <public@thson.de>
---
 drivers/md/dm-ima.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/md/dm-ima.c b/drivers/md/dm-ima.c
index 458a3a1d78bc..81a574129a80 100644
--- a/drivers/md/dm-ima.c
+++ b/drivers/md/dm-ima.c
@@ -193,6 +193,7 @@ void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_fl
 				 * the hash value with the hash algorithm name.
 				 * e.g. sha256:<hash_value>.
 				 */
+	char table_load_event_name[] = "dm_table_load";
 
 	ima_buf = dm_ima_alloc(DM_IMA_MEASUREMENT_BUF_LEN, GFP_KERNEL, noio);
 	if (!ima_buf)
@@ -272,7 +273,7 @@ void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_fl
 		 * targets by prefixing the device metadata again.
 		 */
 		if (unlikely(cur_total_buf_len >= DM_IMA_MEASUREMENT_BUF_LEN)) {
-			dm_ima_measure_data("table_load", ima_buf, l, noio);
+			dm_ima_measure_data(table_load_event_name, ima_buf, l, noio);
 			r = crypto_shash_update(shash, (const u8 *)ima_buf, l);
 			if (r < 0)
 				goto error;
@@ -281,8 +282,8 @@ void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_fl
 			l = 0;
 
 			/*
-			 * Each new "table_load" entry in IMA log should have device data
-			 * prefix, so that multiple records from the same table_load for
+			 * Each new "dm_table_load" entry in IMA log should have device data
+			 * prefix, so that multiple records from the same "dm_table_load" for
 			 * a given device can be linked together.
 			 */
 			memcpy(ima_buf + l, DM_IMA_VERSION_STR, table->md->ima.dm_version_str_len);
@@ -293,7 +294,7 @@ void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_fl
 
 			/*
 			 * If this iteration of the for loop turns out to be the last target
-			 * in the table, dm_ima_measure_data("table_load", ...) doesn't need
+			 * in the table, dm_ima_measure_data("dm_table_load", ...) doesn't need
 			 * to be called again, just the hash needs to be finalized.
 			 * "last_target_measured" tracks this state.
 			 */
@@ -312,7 +313,7 @@ void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_fl
 	}
 
 	if (!last_target_measured) {
-		dm_ima_measure_data("table_load", ima_buf, l, noio);
+		dm_ima_measure_data(table_load_event_name, ima_buf, l, noio);
 
 		r = crypto_shash_update(shash, (const u8 *)ima_buf, l);
 		if (r < 0)
@@ -461,7 +462,7 @@ void dm_ima_measure_on_device_resume(struct mapped_device *md, bool swap)
 	memcpy(device_table_data + l, capacity_str, capacity_len);
 	l += capacity_len;
 
-	dm_ima_measure_data("device_resume", device_table_data, l, noio);
+	dm_ima_measure_data("dm_device_resume", device_table_data, l, noio);
 
 	kfree(dev_name);
 	kfree(dev_uuid);
@@ -578,7 +579,7 @@ void dm_ima_measure_on_device_remove(struct mapped_device *md, bool remove_all)
 	memcpy(device_table_data + l, capacity_str, capacity_len);
 	l += capacity_len;
 
-	dm_ima_measure_data("device_remove", device_table_data, l, noio);
+	dm_ima_measure_data("dm_device_remove", device_table_data, l, noio);
 
 error:
 	kfree(device_table_data);
@@ -659,7 +660,7 @@ void dm_ima_measure_on_table_clear(struct mapped_device *md, bool new_map)
 	memcpy(device_table_data + l, capacity_str, capacity_len);
 	l += capacity_len;
 
-	dm_ima_measure_data("table_clear", device_table_data, l, noio);
+	dm_ima_measure_data("dm_table_clear", device_table_data, l, noio);
 
 	if (new_map) {
 		if (md->ima.inactive_table.hash &&
@@ -734,7 +735,7 @@ void dm_ima_measure_on_device_rename(struct mapped_device *md)
 		  "%s%snew_name=%s,new_uuid=%s;%s", DM_IMA_VERSION_STR, old_device_data,
 		  new_dev_name, new_dev_uuid, capacity_str);
 
-	dm_ima_measure_data("device_rename", combined_device_data, strlen(combined_device_data),
+	dm_ima_measure_data("dm_device_rename", combined_device_data, strlen(combined_device_data),
 			    noio);
 
 	goto exit;
-- 
2.32.0

[dm-devel] [PATCH 3/6] dm ima: prefix ima event name related to device mapper with dm_

[Tushar Sugandhi]

The event names for the DM events recorded in the ima log do not contain
any information to indicate the events are part of the DM devices/targets.

Prefix the event names for DM events with "dm_" to indicate that they
are part of device-mapper.

Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Suggested-by: Thore Sommer <public@thson.de>
---
 drivers/md/dm-ima.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/md/dm-ima.c b/drivers/md/dm-ima.c
index 458a3a1d78bc..81a574129a80 100644
--- a/drivers/md/dm-ima.c
+++ b/drivers/md/dm-ima.c
@@ -193,6 +193,7 @@ void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_fl
 				 * the hash value with the hash algorithm name.
 				 * e.g. sha256:<hash_value>.
 				 */
+	char table_load_event_name[] = "dm_table_load";
 
 	ima_buf = dm_ima_alloc(DM_IMA_MEASUREMENT_BUF_LEN, GFP_KERNEL, noio);
 	if (!ima_buf)
@@ -272,7 +273,7 @@ void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_fl
 		 * targets by prefixing the device metadata again.
 		 */
 		if (unlikely(cur_total_buf_len >= DM_IMA_MEASUREMENT_BUF_LEN)) {
-			dm_ima_measure_data("table_load", ima_buf, l, noio);
+			dm_ima_measure_data(table_load_event_name, ima_buf, l, noio);
 			r = crypto_shash_update(shash, (const u8 *)ima_buf, l);
 			if (r < 0)
 				goto error;
@@ -281,8 +282,8 @@ void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_fl
 			l = 0;
 
 			/*
-			 * Each new "table_load" entry in IMA log should have device data
-			 * prefix, so that multiple records from the same table_load for
+			 * Each new "dm_table_load" entry in IMA log should have device data
+			 * prefix, so that multiple records from the same "dm_table_load" for
 			 * a given device can be linked together.
 			 */
 			memcpy(ima_buf + l, DM_IMA_VERSION_STR, table->md->ima.dm_version_str_len);
@@ -293,7 +294,7 @@ void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_fl
 
 			/*
 			 * If this iteration of the for loop turns out to be the last target
-			 * in the table, dm_ima_measure_data("table_load", ...) doesn't need
+			 * in the table, dm_ima_measure_data("dm_table_load", ...) doesn't need
 			 * to be called again, just the hash needs to be finalized.
 			 * "last_target_measured" tracks this state.
 			 */
@@ -312,7 +313,7 @@ void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_fl
 	}
 
 	if (!last_target_measured) {
-		dm_ima_measure_data("table_load", ima_buf, l, noio);
+		dm_ima_measure_data(table_load_event_name, ima_buf, l, noio);
 
 		r = crypto_shash_update(shash, (const u8 *)ima_buf, l);
 		if (r < 0)
@@ -461,7 +462,7 @@ void dm_ima_measure_on_device_resume(struct mapped_device *md, bool swap)
 	memcpy(device_table_data + l, capacity_str, capacity_len);
 	l += capacity_len;
 
-	dm_ima_measure_data("device_resume", device_table_data, l, noio);
+	dm_ima_measure_data("dm_device_resume", device_table_data, l, noio);
 
 	kfree(dev_name);
 	kfree(dev_uuid);
@@ -578,7 +579,7 @@ void dm_ima_measure_on_device_remove(struct mapped_device *md, bool remove_all)
 	memcpy(device_table_data + l, capacity_str, capacity_len);
 	l += capacity_len;
 
-	dm_ima_measure_data("device_remove", device_table_data, l, noio);
+	dm_ima_measure_data("dm_device_remove", device_table_data, l, noio);
 
 error:
 	kfree(device_table_data);
@@ -659,7 +660,7 @@ void dm_ima_measure_on_table_clear(struct mapped_device *md, bool new_map)
 	memcpy(device_table_data + l, capacity_str, capacity_len);
 	l += capacity_len;
 
-	dm_ima_measure_data("table_clear", device_table_data, l, noio);
+	dm_ima_measure_data("dm_table_clear", device_table_data, l, noio);
 
 	if (new_map) {
 		if (md->ima.inactive_table.hash &&
@@ -734,7 +735,7 @@ void dm_ima_measure_on_device_rename(struct mapped_device *md)
 		  "%s%snew_name=%s,new_uuid=%s;%s", DM_IMA_VERSION_STR, old_device_data,
 		  new_dev_name, new_dev_uuid, capacity_str);
 
-	dm_ima_measure_data("device_rename", combined_device_data, strlen(combined_device_data),
+	dm_ima_measure_data("dm_device_rename", combined_device_data, strlen(combined_device_data),
 			    noio);
 
 	goto exit;
-- 
2.32.0


--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

[PATCH 4/6] dm ima: add a warning in dm_init if duplicate ima events are not measured

[Tushar Sugandhi]

The end-users of DM devices/targets may remove and re-create the same
device multiple times.  IMA does not measure such duplicate events if the
configuration CONFIG_IMA_DISABLE_HTABLE is set to 'n'.
To avoid confusion, the end-users need some indication on the client
if that configuration option is disabled.

Add a one-time warning to dmesg during dm_init if
CONFIG_IMA_DISABLE_HTABLE is set to 'n', to notify the end-users that
duplicate events will not be measured in the ima log.

Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
---
 drivers/md/dm.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 2e82757b4ab7..948cb0dc5fc4 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -265,6 +265,12 @@ static int __init dm_init(void)
 
 	int r, i;
 
+#if (IS_ENABLED(CONFIG_BLK_DEV_DM) && IS_ENABLED(CONFIG_IMA) \
+	&& !IS_ENABLED(CONFIG_IMA_DISABLE_HTABLE))
+	DMWARN("CONFIG_IMA_DISABLE_HTABLE is disabled."
+	       " Duplicate IMA measurements will not be recorded in the IMA log.");
+#endif
+
 	for (i = 0; i < count; i++) {
 		r = _inits[i]();
 		if (r)
-- 
2.32.0

[dm-devel] [PATCH 4/6] dm ima: add a warning in dm_init if duplicate ima events are not measured

[Tushar Sugandhi]

The end-users of DM devices/targets may remove and re-create the same
device multiple times.  IMA does not measure such duplicate events if the
configuration CONFIG_IMA_DISABLE_HTABLE is set to 'n'.
To avoid confusion, the end-users need some indication on the client
if that configuration option is disabled.

Add a one-time warning to dmesg during dm_init if
CONFIG_IMA_DISABLE_HTABLE is set to 'n', to notify the end-users that
duplicate events will not be measured in the ima log.

Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
---
 drivers/md/dm.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 2e82757b4ab7..948cb0dc5fc4 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -265,6 +265,12 @@ static int __init dm_init(void)
 
 	int r, i;
 
+#if (IS_ENABLED(CONFIG_BLK_DEV_DM) && IS_ENABLED(CONFIG_IMA) \
+	&& !IS_ENABLED(CONFIG_IMA_DISABLE_HTABLE))
+	DMWARN("CONFIG_IMA_DISABLE_HTABLE is disabled."
+	       " Duplicate IMA measurements will not be recorded in the IMA log.");
+#endif
+
 	for (i = 0; i < count; i++) {
 		r = _inits[i]();
 		if (r)
-- 
2.32.0


--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

[PATCH 5/6] dm ima: update dm target attributes for ima measurements

[Tushar Sugandhi]

Certain DM targets ('integrity', 'multipath', 'verity') need to update the
way their attributes are recorded in the ima log, so that the attestation
servers can interpret the data correctly and decide if the devices
meet the attestation requirements.  For instance, the "mode=%c" attribute
in the 'integrity' target is measured twice, the 'verity' target is
missing the attribute "root_hash_sig_key_desc=%s", and the 'multipath'
target needs to index the attributes properly.

Update 'integrity' target to remove the duplicate measurement of
the attribute "mode=%c".  Add "root_hash_sig_key_desc=%s" attribute
for the 'verity' target.  Index various attributes in 'multipath'
target.  Also, add "nr_priority_groups=%u" attribute to 'multipath'
target to record the number of priority groups.

Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Suggested-by: Thore Sommer <public@thson.de>
---
 drivers/md/dm-integrity.c     |  1 -
 drivers/md/dm-mpath.c         | 26 ++++++++++++++++++--------
 drivers/md/dm-verity-target.c |  2 ++
 3 files changed, 20 insertions(+), 9 deletions(-)

diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c
index 40f8116c8e44..6e0b2f2f5911 100644
--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -3328,7 +3328,6 @@ static void dm_integrity_status(struct dm_target *ti, status_type_t type,
 		DMEMIT(",journal_sectors=%u", ic->initial_sectors - SB_SECTORS);
 		DMEMIT(",interleave_sectors=%u", 1U << ic->sb->log2_interleave_sectors);
 		DMEMIT(",buffer_sectors=%u", 1U << ic->log2_buffer_sectors);
-		DMEMIT(",mode=%c", ic->mode);
 		DMEMIT(";");
 		break;
 	}
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index c3c514a9edbb..694aaca4eea2 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -1790,7 +1790,7 @@ static void multipath_resume(struct dm_target *ti)
 static void multipath_status(struct dm_target *ti, status_type_t type,
 			     unsigned status_flags, char *result, unsigned maxlen)
 {
-	int sz = 0;
+	int sz = 0, pg_counter, pgpath_counter;
 	unsigned long flags;
 	struct multipath *m = ti->private;
 	struct priority_group *pg;
@@ -1906,7 +1906,12 @@ static void multipath_status(struct dm_target *ti, status_type_t type,
 		break;
 
 	case STATUSTYPE_IMA:
+		sz = 0; /*reset the result pointer*/
+
 		DMEMIT_TARGET_NAME_VERSION(ti->type);
+		DMEMIT(",nr_priority_groups=%u", m->nr_priority_groups);
+
+		pg_counter = 0;
 		list_for_each_entry(pg, &m->priority_groups, list) {
 			if (pg->bypassed)
 				state = 'D';	/* Disabled */
@@ -1914,21 +1919,26 @@ static void multipath_status(struct dm_target *ti, status_type_t type,
 				state = 'A';	/* Currently Active */
 			else
 				state = 'E';	/* Enabled */
-			DMEMIT(",pg_state=%c", state);
-			DMEMIT(",nr_pgpaths=%u", pg->nr_pgpaths);
-			DMEMIT(",path_selector_name=%s", pg->ps.type->name);
+			DMEMIT(",pg_state_%d=%c", pg_counter, state);
+			DMEMIT(",nr_pgpaths_%d=%u", pg_counter, pg->nr_pgpaths);
+			DMEMIT(",path_selector_name_%d=%s", pg_counter, pg->ps.type->name);
 
+			pgpath_counter = 0;
 			list_for_each_entry(p, &pg->pgpaths, list) {
-				DMEMIT(",path_name=%s,is_active=%c,fail_count=%u",
-				       p->path.dev->name, p->is_active ? 'A' : 'F',
-				       p->fail_count);
+				DMEMIT(",path_name_%d_%d=%s,is_active_%d_%d=%c,fail_count_%d_%d=%u",
+				       pg_counter, pgpath_counter, p->path.dev->name,
+				       pg_counter, pgpath_counter, p->is_active ? 'A' : 'F',
+				       pg_counter, pgpath_counter, p->fail_count);
 				if (pg->ps.type->status) {
-					DMEMIT(",path_selector_status=");
+					DMEMIT(",path_selector_status_%d_%d=",
+					       pg_counter, pgpath_counter);
 					sz += pg->ps.type->status(&pg->ps, &p->path,
 								  type, result + sz,
 								  maxlen - sz);
 				}
+				pgpath_counter++;
 			}
+			pg_counter++;
 		}
 		DMEMIT(";");
 		break;
diff --git a/drivers/md/dm-verity-target.c b/drivers/md/dm-verity-target.c
index bfefa100c265..22a5ac82446a 100644
--- a/drivers/md/dm-verity-target.c
+++ b/drivers/md/dm-verity-target.c
@@ -794,6 +794,8 @@ static void verity_status(struct dm_target *ti, status_type_t type,
 
 		DMEMIT(",ignore_zero_blocks=%c", v->zero_digest ? 'y' : 'n');
 		DMEMIT(",check_at_most_once=%c", v->validated_blocks ? 'y' : 'n');
+		if (v->signature_key_desc)
+			DMEMIT(",root_hash_sig_key_desc=%s", v->signature_key_desc);
 
 		if (v->mode != DM_VERITY_MODE_EIO) {
 			DMEMIT(",verity_mode=");
-- 
2.32.0

[dm-devel] [PATCH 5/6] dm ima: update dm target attributes for ima measurements

[Tushar Sugandhi]

Certain DM targets ('integrity', 'multipath', 'verity') need to update the
way their attributes are recorded in the ima log, so that the attestation
servers can interpret the data correctly and decide if the devices
meet the attestation requirements.  For instance, the "mode=%c" attribute
in the 'integrity' target is measured twice, the 'verity' target is
missing the attribute "root_hash_sig_key_desc=%s", and the 'multipath'
target needs to index the attributes properly.

Update 'integrity' target to remove the duplicate measurement of
the attribute "mode=%c".  Add "root_hash_sig_key_desc=%s" attribute
for the 'verity' target.  Index various attributes in 'multipath'
target.  Also, add "nr_priority_groups=%u" attribute to 'multipath'
target to record the number of priority groups.

Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Suggested-by: Thore Sommer <public@thson.de>
---
 drivers/md/dm-integrity.c     |  1 -
 drivers/md/dm-mpath.c         | 26 ++++++++++++++++++--------
 drivers/md/dm-verity-target.c |  2 ++
 3 files changed, 20 insertions(+), 9 deletions(-)

diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c
index 40f8116c8e44..6e0b2f2f5911 100644
--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -3328,7 +3328,6 @@ static void dm_integrity_status(struct dm_target *ti, status_type_t type,
 		DMEMIT(",journal_sectors=%u", ic->initial_sectors - SB_SECTORS);
 		DMEMIT(",interleave_sectors=%u", 1U << ic->sb->log2_interleave_sectors);
 		DMEMIT(",buffer_sectors=%u", 1U << ic->log2_buffer_sectors);
-		DMEMIT(",mode=%c", ic->mode);
 		DMEMIT(";");
 		break;
 	}
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index c3c514a9edbb..694aaca4eea2 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -1790,7 +1790,7 @@ static void multipath_resume(struct dm_target *ti)
 static void multipath_status(struct dm_target *ti, status_type_t type,
 			     unsigned status_flags, char *result, unsigned maxlen)
 {
-	int sz = 0;
+	int sz = 0, pg_counter, pgpath_counter;
 	unsigned long flags;
 	struct multipath *m = ti->private;
 	struct priority_group *pg;
@@ -1906,7 +1906,12 @@ static void multipath_status(struct dm_target *ti, status_type_t type,
 		break;
 
 	case STATUSTYPE_IMA:
+		sz = 0; /*reset the result pointer*/
+
 		DMEMIT_TARGET_NAME_VERSION(ti->type);
+		DMEMIT(",nr_priority_groups=%u", m->nr_priority_groups);
+
+		pg_counter = 0;
 		list_for_each_entry(pg, &m->priority_groups, list) {
 			if (pg->bypassed)
 				state = 'D';	/* Disabled */
@@ -1914,21 +1919,26 @@ static void multipath_status(struct dm_target *ti, status_type_t type,
 				state = 'A';	/* Currently Active */
 			else
 				state = 'E';	/* Enabled */
-			DMEMIT(",pg_state=%c", state);
-			DMEMIT(",nr_pgpaths=%u", pg->nr_pgpaths);
-			DMEMIT(",path_selector_name=%s", pg->ps.type->name);
+			DMEMIT(",pg_state_%d=%c", pg_counter, state);
+			DMEMIT(",nr_pgpaths_%d=%u", pg_counter, pg->nr_pgpaths);
+			DMEMIT(",path_selector_name_%d=%s", pg_counter, pg->ps.type->name);
 
+			pgpath_counter = 0;
 			list_for_each_entry(p, &pg->pgpaths, list) {
-				DMEMIT(",path_name=%s,is_active=%c,fail_count=%u",
-				       p->path.dev->name, p->is_active ? 'A' : 'F',
-				       p->fail_count);
+				DMEMIT(",path_name_%d_%d=%s,is_active_%d_%d=%c,fail_count_%d_%d=%u",
+				       pg_counter, pgpath_counter, p->path.dev->name,
+				       pg_counter, pgpath_counter, p->is_active ? 'A' : 'F',
+				       pg_counter, pgpath_counter, p->fail_count);
 				if (pg->ps.type->status) {
-					DMEMIT(",path_selector_status=");
+					DMEMIT(",path_selector_status_%d_%d=",
+					       pg_counter, pgpath_counter);
 					sz += pg->ps.type->status(&pg->ps, &p->path,
 								  type, result + sz,
 								  maxlen - sz);
 				}
+				pgpath_counter++;
 			}
+			pg_counter++;
 		}
 		DMEMIT(";");
 		break;
diff --git a/drivers/md/dm-verity-target.c b/drivers/md/dm-verity-target.c
index bfefa100c265..22a5ac82446a 100644
--- a/drivers/md/dm-verity-target.c
+++ b/drivers/md/dm-verity-target.c
@@ -794,6 +794,8 @@ static void verity_status(struct dm_target *ti, status_type_t type,
 
 		DMEMIT(",ignore_zero_blocks=%c", v->zero_digest ? 'y' : 'n');
 		DMEMIT(",check_at_most_once=%c", v->validated_blocks ? 'y' : 'n');
+		if (v->signature_key_desc)
+			DMEMIT(",root_hash_sig_key_desc=%s", v->signature_key_desc);
 
 		if (v->mode != DM_VERITY_MODE_EIO) {
 			DMEMIT(",verity_mode=");
-- 
2.32.0


--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

[PATCH 6/6] dm ima: update dm documentation for ima measurement support

[Tushar Sugandhi]

The ima documentation for measuring DM targets (dm-ima.rst) is
missing the attribute information for the targets - 'cache', 'integrity',
'multipath', and 'snapshot'.  It is also missing the grammar for
various DM events and targets, which can help the attestation servers
to determine what data to expect for a given DM device.  Further,
the documentation needs to be updated to incorporate code changes
made to DM ima events and targets as part of this patch series.  For
instance, prefixing the event names with "dm_", adding the DM version to
events, prefixing the table hashes in the ima log with the 
hash algorithm etc.  There are warnings reported by 'make htmldocs' on 
dm-ima.rst, which need to be fixed.  And lastly, the expected behavior
needs to be documented when the configuration CONFIG_IMA_DISABLE_HTABLE
is disabled.

Update the documentation to add examples for 'cache', 'integrity',
'multipath', and 'snapshot' targets.  Add the grammar for
various DM events and targets in Backus Naur form,
so that the attestation servers can interpret and act on the ima 
measurements for DM target.  Fix htmldocs warnings in dm-ima.rst.  Update
the documentation to be consistent with the code changes that are part of
this patch series.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
---
 .../admin-guide/device-mapper/dm-ima.rst      | 827 +++++++++++++-----
 1 file changed, 618 insertions(+), 209 deletions(-)

diff --git a/Documentation/admin-guide/device-mapper/dm-ima.rst b/Documentation/admin-guide/device-mapper/dm-ima.rst
index 41894112ff26..a4aa50a828e0 100644
--- a/Documentation/admin-guide/device-mapper/dm-ima.rst
+++ b/Documentation/admin-guide/device-mapper/dm-ima.rst
@@ -26,9 +26,10 @@ fully trusting the system with business-critical data/workload.
 IMA kernel subsystem provides the necessary functionality for
 device mapper to measure the state and configuration of
 various block devices -
-  - BY device mapper itself, from within the kernel,
-  - in a tamper resistant way,
-  - and re-measured - triggered on state/configuration change.
+
+- by device mapper itself, from within the kernel,
+- in a tamper resistant way,
+- and re-measured - triggered on state/configuration change.
 
 Setting the IMA Policy:
 =======================
@@ -36,271 +37,679 @@ For IMA to measure the data on a given system, the IMA policy on the
 system needs to be updated to have following line, and the system needs
 to be restarted for the measurements to take effect.
 
-/etc/ima/ima-policy
- measure func=CRITICAL_DATA label=device-mapper template=ima-buf
+::
+
+ /etc/ima/ima-policy
+    measure func=CRITICAL_DATA label=device-mapper template=ima-buf
 
 The measurements will be reflected in the IMA logs, which are located at:
 
-/sys/kernel/security/integrity/ima/ascii_runtime_measurements
-/sys/kernel/security/integrity/ima/binary_runtime_measurements
+::
+
+ /sys/kernel/security/integrity/ima/ascii_runtime_measurements
+ /sys/kernel/security/integrity/ima/binary_runtime_measurements
 
 Then IMA ASCII measurement log has the following format:
-PCR TEMPLATE_DIGEST TEMPLATE ALG:EVENT_DIGEST EVENT_NAME EVENT_DATA
 
-PCR := Platform Configuration Register, in which the values are registered.
+::
+
+ <PCR> <TEMPLATE_DATA_DIGEST> <TEMPLATE_NAME> <TEMPLATE_DATA>
+
+ PCR := Platform Configuration Register, in which the values are registered.
        This is applicable if TPM chip is in use.
-TEMPLATE_DIGEST := Template digest of the IMA record.
-TEMPLATE := Template that registered the integrity value (e.g. ima-buf).
-ALG:EVENT_DIGEST = Algorithm to compute event digest, followed by digest of event data
-EVENT_NAME := Description of the event (e.g. 'table_load').
-EVENT_DATA := The event data to be measured.
 
-The DM target data measured by IMA subsystem can alternatively
-be queried from userspace by setting DM_IMA_MEASUREMENT_FLAG with
-DM_TABLE_STATUS_CMD.
+ TEMPLATE_DATA_DIGEST := Template data digest of the IMA record.
+ TEMPLATE_NAME := Template name that registered the integrity value (e.g. ima-buf).
+
+ TEMPLATE_DATA := <ALG> ":" <EVENT_DIGEST> <EVENT_NAME> <EVENT_DATA>
+                  It contains data for the specific event to be measured,
+                  in a given template data format.
+
+ ALG := Algorithm to compute event digest
+ EVENT_DIGEST := Digest of the event data
+ EVENT_NAME := Description of the event (e.g. 'dm_table_load').
+ EVENT_DATA := The event data to be measured.
+
+|
+
+| *NOTE #1:*
+| The DM target data measured by IMA subsystem can alternatively
+ be queried from userspace by setting DM_IMA_MEASUREMENT_FLAG with
+ DM_TABLE_STATUS_CMD.
+
+|
+
+| *NOTE #2:*
+| The Kernel configuration CONFIG_IMA_DISABLE_HTABLE allows measurement of duplicate records.
+| To support recording duplicate IMA events in the IMA log, the Kernel needs to be configured with
+ CONFIG_IMA_DISABLE_HTABLE=y.
 
 Supported Device States:
 ========================
-Following device state changes will trigger IMA measurements.
-01. Table load
-02. Device resume
-03. Device remove
-04. Table clear
-05. Device rename
-
-01. Table load:
+Following device state changes will trigger IMA measurements:
+
+ 1. Table load
+ #. Device resume
+ #. Device remove
+ #. Table clear
+ #. Device rename
+
+1. Table load:
 ---------------
 When a new table is loaded in a device's inactive table slot,
 the device information and target specific details from the
 targets in the table are measured.
 
-For instance, if a linear device is created with the following table entries,
-# dmsetup create linear1
-0 2 linear /dev/loop0 512
-2 2 linear /dev/loop0 512
-4 2 linear /dev/loop0 512
-6 2 linear /dev/loop0 512
-
-Then IMA ASCII measurement log will have an entry with:
-EVENT_NAME := table_load
-EVENT_DATA := [device_data];[target_data_row_1];[target_data_row_2];...[target_data_row_n];
-
-E.g.
-(converted from ASCII to text for readability)
-10 a8c5ff755561c7a28146389d1514c318592af49a ima-buf sha256:4d73481ecce5eadba8ab084640d85bb9ca899af4d0a122989252a76efadc5b72
-table_load
-name=linear1,uuid=,major=253,minor=0,minor_count=1,num_targets=4;
-target_index=0,target_begin=0,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
-target_index=1,target_begin=2,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
-target_index=2,target_begin=4,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
-target_index=3,target_begin=6,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
-
-02. Device resume:
+The IMA measurement log has the following format for 'dm_table_load':
+
+::
+
+ EVENT_NAME := "dm_table_load"
+ EVENT_DATA := <dm_version_str> ";" <device_metadata> ";" <table_load_data>
+
+ dm_version_str := "dm_version=" <N> "." <N> "." <N>
+                  Same as Device Mapper driver version.
+ device_metadata := <device_name> "," <device_uuid> "," <device_major> "," <device_minor> ","
+                   <minor_count> "," <num_device_targets> ";"
+
+ device_name := "name=" <dm-device-name>
+ device_uuid := "uuid=" <dm-device-uuid>
+ device_major := "major=" <N>
+ device_minor := "minor=" <N>
+ minor_count := "minor_count=" <N>
+ num_device_targets := "num_targets=" <N>
+ dm-device-name := Name of the device. If it contains special characters like '\', ',', ';',
+                   they are prefixed with '\'.
+ dm-device-uuid := UUID of the device. If it contains special characters like '\', ',', ';',
+                   they are prefixed with '\'.
+
+ table_load_data := <target_data>
+                    Represents the data (as name=value pairs) from various targets in the table,
+                    which is being loaded into the DM device's inactive table slot.
+ target_data := <target_data_row> | <target_data><target_data_row>
+
+ target_data_row := <target_index> "," <target_begin> "," <target_len> "," <target_name> ","
+                    <target_version> "," <target_attributes> ";"
+ target_index := "target_index=" <N>
+                 Represents nth target in the table (from 0 to N-1 targets specified in <num_device_targets>)
+                 If all the data for N targets doesn't fit in the given buffer - then the data that fits
+                 in the buffer (say from target 0 to x) is measured in a given IMA event.
+                 The remaining data from targets x+1 to N-1 is measured in the subsequent IMA events,
+                 with the same format as that of 'dm_table_load'
+                 i.e. <dm_version_str> ";" <device_metadata> ";" <table_load_data>.
+
+ target_begin := "target_begin=" <N>
+ target_len := "target_len=" <N>
+ target_name := Name of the target. 'linear', 'crypt', 'integrity' etc.
+                The targets that are supported for IMA measurements are documented below in the
+                'Supported targets' section.
+ target_version := "target_version=" <N> "." <N> "." <N>
+ target_attributes := Data containing comma separated list of name=value pairs of target specific attributes.
+
+ For instance, if a linear device is created with the following table entries,
+  # dmsetup create linear1
+  0 2 linear /dev/loop0 512
+  2 2 linear /dev/loop0 512
+  4 2 linear /dev/loop0 512
+  6 2 linear /dev/loop0 512
+
+ Then IMA ASCII measurement log will have the following entry:
+ (converted from ASCII to text for readability)
+
+ 10 a8c5ff755561c7a28146389d1514c318592af49a ima-buf sha256:4d73481ecce5eadba8ab084640d85bb9ca899af4d0a122989252a76efadc5b72
+ dm_table_load
+ dm_version=4.45.0;
+ name=linear1,uuid=,major=253,minor=0,minor_count=1,num_targets=4;
+ target_index=0,target_begin=0,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
+ target_index=1,target_begin=2,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
+ target_index=2,target_begin=4,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
+ target_index=3,target_begin=6,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
+
+2. Device resume:
 ------------------
-When a suspended device is resumed, the device information and a sha256 hash of the
+When a suspended device is resumed, the device information and the hash of the
 data from previous load of an active table are measured.
 
-For instance, if a linear device is resumed with the following command,
-#dmsetup resume linear1
+The IMA measurement log has the following format for 'dm_device_resume':
 
-Then IMA ASCII measurement log will have an entry with:
-EVENT_NAME := device_resume
-EVENT_DATA := [device_data];active_table_hash=(sha256hash([device_data];[target_data_row_1];...[target_data_row_n]);
-              current_device_capacity=<N>;
+::
 
-E.g.
-(converted from ASCII to text for readability)
-10 56c00cc062ffc24ccd9ac2d67d194af3282b934e ima-buf sha256:e7d12c03b958b4e0e53e7363a06376be88d98a1ac191fdbd3baf5e4b77f329b6
-device_resume
-name=linear1,uuid=,major=253,minor=0,minor_count=1,num_targets=4;
-active_table_hash=4d73481ecce5eadba8ab084640d85bb9ca899af4d0a122989252a76efadc5b72;current_device_capacity=8;
+ EVENT_NAME := "dm_device_resume"
+ EVENT_DATA := <dm_version_str> ";" <device_metadata> ";" <active_table_hash> ";" <current_device_capacity> ";"
 
-03. Device remove:
-------------------
-When a device is removed, the device information and a sha256 hash of the
-data from an active and inactive table are measured.
+ dm_version_str := As described in the 'Table load' section above.
+ device_metadata := As described in the 'Table load' section above.
+ active_table_hash := "active_table_hash=" <table_hash_alg> ":" <table_hash>
+                      Rerpresents the hash of the IMA data being measured for the
+                      active table for the device.
+ table_hash_alg := Algorithm used to compute the hash.
+ table_hash := Hash of the (<dm_version_str> ";" <device_metadata> ";" <table_load_data> ";")
+               as described in the 'dm_table_load' above.
+               Note: If the table_load data spans across multiple IMA 'dm_table_load'
+               events for a given device, the hash is computed combining all the event data
+               i.e. (<dm_version_str> ";" <device_metadata> ";" <table_load_data> ";")
+               across all those events.
+ current_device_capacity := "current_device_capacity=" <N>
 
-For instance, if a linear device is removed with the following command,
-# dmsetup remove linear1
+ For instance, if a linear device is resumed with the following command,
+ #dmsetup resume linear1
 
-Then IMA ASCII measurement log will have an entry with:
-EVENT_NAME := device_remove
-EVENT_DATA := [device_active_metadata];[device_inactive_metadata];
-              [active_table_hash=(sha256hash([device_active_metadata];[active_table_row_1];...[active_table_row_n]),
-              [inactive_table_hash=(sha256hash([device_inactive_metadata];[inactive_table_row_1];...[inactive_table_row_n]),
-              remove_all=[y|n];current_device_capacity=<N>;
+ then IMA ASCII measurement log will have an entry with:
+ (converted from ASCII to text for readability)
 
-E.g
-(converted from ASCII to text for readability)
-10 499812b621b705061c4514d643894483e16d2619 ima-buf sha256:c3f26b02f09bf5b464925589454bdd4d354077ce430fd1e75c9e96ce29cd1cad
-device_remove
-device_active_metadata=name=linear1,uuid=,major=253,minor=0,minor_count=1,num_targets=4;
-device_inactive_metadata=name=linear1,uuid=,major=253,minor=0,minor_count=1,num_targets=2;
-active_table_hash=4d73481ecce5eadba8ab084640d85bb9ca899af4d0a122989252a76efadc5b72,
-inactive_table_hash=5596cc857b0e887fd0c5d58dc6382513284596b07f09fd37efae2da224bd521d,remove_all=n;
-current_device_capacity=8;
+ 10 56c00cc062ffc24ccd9ac2d67d194af3282b934e ima-buf sha256:e7d12c03b958b4e0e53e7363a06376be88d98a1ac191fdbd3baf5e4b77f329b6
+ dm_device_resume
+ dm_version=4.45.0;
+ name=linear1,uuid=,major=253,minor=0,minor_count=1,num_targets=4;
+ active_table_hash=sha256:4d73481ecce5eadba8ab084640d85bb9ca899af4d0a122989252a76efadc5b72;current_device_capacity=8;
 
+3. Device remove:
+------------------
+When a device is removed, the device information and a sha256 hash of the
+data from an active and inactive table are measured.
 
-04. Table clear:
+The IMA measurement log has the following format for 'dm_device_remove':
+
+::
+
+ EVENT_NAME := "dm_device_remove"
+ EVENT_DATA := <dm_version_str> ";" <device_active_metadata> ";" <device_inactive_metadata> ";"
+               <active_table_hash> "," <inactive_table_hash> "," <remove_all> ";" <current_device_capacity> ";"
+
+ dm_version_str := As described in the 'Table load' section above.
+ device_active_metadata := Device metadata that reflects the currently loaded active table.
+                           The format is same as 'device_metadata' described in the 'Table load' section above.
+ device_inactive_metadata := Device metadata that reflects the inactive table.
+                             The format is same as 'device_metadata' described in the 'Table load' section above.
+ active_table_hash := Hash of the currently loaded active table.
+                      The format is same as 'active_table_hash' described in the 'Device resume' section above.
+ inactive_table_hash :=  Hash of the inactive table.
+                         The format is same as 'active_table_hash' described in the 'Device resume' section above.
+ remove_all := "remove_all=" <yes_no>
+ yes_no := "y" | "n"
+ current_device_capacity := "current_device_capacity=" <N>
+
+ For instance, if a linear device is removed with the following command,
+  #dmsetup remove l1
+
+ then IMA ASCII measurement log will have the following entry:
+ (converted from ASCII to text for readability)
+
+ 10 790e830a3a7a31590824ac0642b3b31c2d0e8b38 ima-buf sha256:ab9f3c959367a8f5d4403d6ce9c3627dadfa8f9f0e7ec7899299782388de3840
+ dm_device_remove
+ dm_version=4.45.0;
+ device_active_metadata=name=l1,uuid=,major=253,minor=2,minor_count=1,num_targets=2;
+ device_inactive_metadata=name=l1,uuid=,major=253,minor=2,minor_count=1,num_targets=1;
+ active_table_hash=sha256:4a7e62efaebfc86af755831998b7db6f59b60d23c9534fb16a4455907957953a,
+ inactive_table_hash=sha256:9d79c175bc2302d55a183e8f50ad4bafd60f7692fd6249e5fd213e2464384b86,remove_all=n;
+ current_device_capacity=2048;
+
+4. Table clear:
 ----------------
 When an inactive table is cleared from the device, the device information and a sha256 hash of the
 data from an inactive table are measured.
 
-For instance, if a linear device's inactive table is cleared with the following command,
+The IMA measurement log has the following format for 'dm_table_clear':
+
+::
 
-# dmsetup clear linear1
+ EVENT_NAME := "dm_table_clear"
+ EVENT_DATA := <dm_version_str> ";" <device_inactive_metadata> ";" <inactive_table_hash> ";" <current_device_capacity> ";"
 
-Then IMA ASCII measurement log will have an entry with:
-EVENT_NAME := table_clear
-EVENT_DATA := [device_data];inactive_table_hash=(sha256hash([device_data];[inactive_table_row_1];...[inactive_table_row_n]);
-current_device_capacity=<N>;
+ dm_version_str := As described in the 'Table load' section above.
+ device_inactive_metadata := Device metadata that was captured during the load time inactive table being cleared.
+                             The format is same as 'device_metadata' described in the 'Table load' section above.
+ inactive_table_hash := Hash of the inactive table being cleared from the device.
+                        The format is same as 'active_table_hash' described in the 'Device resume' section above.
+ current_device_capacity := "current_device_capacity=" <N>
 
-E.g.
-(converted from ASCII to text for readability)
-10 9c11e284d792875352d51c09f6643c96649484be ima-buf sha256:84b22b364ea4d8264fa33c38635c18ef448fa9077731fa7e5f969b1da2003ea4
-table_clear
-name=linear1,uuid=,major=253,minor=0,minor_count=1,num_targets=2;
-inactive_table_hash=5596cc857b0e887fd0c5d58dc6382513284596b07f09fd37efae2da224bd521d;current_device_capacity=0;
+ For instance, if a linear device's inactive table is cleared,
+  #dmsetup clear l1
 
+ then IMA ASCII measurement log will have an entry with:
+ (converted from ASCII to text for readability)
 
-05. Device rename:
+ 10 77d347408f557f68f0041acb0072946bb2367fe5 ima-buf sha256:42f9ca22163fdfa548e6229dece2959bc5ce295c681644240035827ada0e1db5
+ dm_table_clear
+ dm_version=4.45.0;
+ name=l1,uuid=,major=253,minor=2,minor_count=1,num_targets=1;
+ inactive_table_hash=sha256:75c0dc347063bf474d28a9907037eba060bfe39d8847fc0646d75e149045d545;current_device_capacity=1024;
+
+5. Device rename:
 ------------------
 When an device's NAME or UUID is changed, the device information and the new NAME and UUID
 are measured.
 
-For instance, if a linear device's name is changed with the following command,
+The IMA measurement log has the following format for 'dm_device_rename':
+
+::
+
+ EVENT_NAME := "dm_device_rename"
+ EVENT_DATA := <dm_version_str> ";" <device_active_metadata> ";" <new_device_name> "," <new_device_uuid> ";" <current_device_capacity> ";"
+
+ dm_version_str := As described in the 'Table load' section above.
+ device_active_metadata := Device metadata that reflects the currently loaded active table.
+                           The format is same as 'device_metadata' described in the 'Table load' section above.
+ new_device_name := "new_name=" <dm-device-name>
+ dm-device-name := Same as <dm-device-name> described in 'Table load' section above
+ new_device_uuid := "new_uuid=" <dm-device-uuid>
+ dm-device-uuid := Same as <dm-device-uuid> described in 'Table load' section above
+ current_device_capacity := "current_device_capacity=" <N>
+
+ E.g 1: if a linear device's name is changed with the following command,
+  #dmsetup rename linear1 --setuuid 1234-5678
 
-#dmsetup rename linear1 linear=2
-Then IMA ASCII measurement log will have an entry with:
-EVENT_NAME := device_rename
-EVENT_DATA := [current_device_data];new_name=<new_name_value>;new_uuid=<new_uuid_value>;current_device_capacity=<N>;
+ then IMA ASCII measurement log will have an entry with:
+ (converted from ASCII to text for readability)
 
-E.g 1:
-#dmsetup rename linear1 --setuuid 1234-5678
+ 10 8b0423209b4c66ac1523f4c9848c9b51ee332f48 ima-buf sha256:6847b7258134189531db593e9230b257c84f04038b5a18fd2e1473860e0569ac
+ dm_device_rename
+ dm_version=4.45.0;
+ name=linear1,uuid=,major=253,minor=2,minor_count=1,num_targets=1;new_name=linear1,new_uuid=1234-5678;
+ current_device_capacity=1024;
 
-IMA Log entry:
-(converted from ASCII to text for readability)
-10 7380ef4d1349fe1ebd74affa54e9fcc960e3cbf5 ima-buf sha256:9759e36a17a967ea43c1bf3455279395a40bd0401105ec5ad8edb9a52054efc7
-device_rename
-name=linear1,uuid=,major=253,minor=0,minor_count=1,num_targets=1;new_name=linear1,new_uuid=1234-5678;current_device_capacity=2;
+ E.g 2:  if a linear device's name is changed with the following command,
+  # dmsetup rename linear1 linear=2
 
-E.g 2:
-# dmsetup rename linear1 linear=2
-10 092c8266fc36e44f74c59f123ecfe15310f249f4 ima-buf sha256:4cf8b85c81fa6fedaeb602b05019124dbbb0605dce58fcdeea56887a8a3874cd
-device_rename
-name=linear1,uuid=1234-5678,major=253,minor=0,minor_count=1,num_targets=1;new_name=linear\=2,new_uuid=1234-5678;current_device_capacity=2;
+ then IMA ASCII measurement log will have an entry with:
+ (converted from ASCII to text for readability)
 
+ 10 bef70476b99c2bdf7136fae033aa8627da1bf76f ima-buf sha256:8c6f9f53b9ef9dc8f92a2f2cca8910e622543d0f0d37d484870cb16b95111402
+ dm_device_rename
+ dm_version=4.45.0;
+ name=linear1,uuid=1234-5678,major=253,minor=2,minor_count=1,num_targets=1;
+ new_name=linear\=2,new_uuid=1234-5678;
+ current_device_capacity=1024;
 
 Supported targets:
 ==================
-Following targets are supported to measure their data using IMA.
-
-01. cache
-02. crypt
-03. integrity
-04. linear
-05. mirror
-06. multipath
-07. raid
-08. snapshot
-09. striped
-10. verity
 
-01. cache
----------
-<<documenatation in progress>>
+Following targets are supported to measure their data using IMA:
+
+ 1. cache
+ #. crypt
+ #. integrity
+ #. linear
+ #. mirror
+ #. multipath
+ #. raid
+ #. snapshot
+ #. striped
+ #. verity
 
-02. crypt
+1. cache
 ---------
-When a crypt target is loaded, then IMA ASCII measurement log will have an entry
-similar to the following, depicting what crypt attributes are measured in EVENT_DATA.
-
-(converted from ASCII to text for readability)
-10 fe3b80a35b155bd282df778e2625066c05fc068c ima-buf sha256:2d86ce9d6f16a4a97607318aa123ae816e0ceadefeea7903abf7f782f2cb78ad
-table_load
-name=test-crypt,uuid=,major=253,minor=0,minor_count=1,num_targets=1;
-target_index=0,target_begin=0,target_len=1953125,target_name=crypt,target_version=1.23.0,
-allow_discards=y,same_cpu=n,submit_from_crypt_cpus=n,no_read_workqueue=n,no_write_workqueue=n,
-iv_large_sectors=n,cipher_string=aes-xts-plain64,key_size=32,key_parts=1,key_extra_size=0,key_mac_size=0;
-
-03. integrity
+The 'target_attributes' (described as part of EVENT_DATA in 'Table load'
+section above) has the following data format for 'cache' target.
+
+::
+
+ target_attributes := <target_name> "," <target_version> "," <metadata_mode> "," <cache_metadata_device> ","
+                      <cache_device> "," <cache_origin_device> "," <writethrough> "," <writeback> ","
+                      <passthrough> "," <no_discard_passdown> ";"
+
+ target_name := "target_name=cache"
+ target_version := "target_version=" <N> "." <N> "." <N>
+ metadata_mode := "metadata_mode=" <cache_metadata_mode>
+ cache_metadata_mode := "fail" | "ro" | "rw"
+ cache_device := "cache_device=" <cache_device_name_string>
+ cache_origin_device := "cache_origin_device=" <cache_origin_device_string>
+ writethrough := "writethrough=" <yes_no>
+ writeback := "writeback=" <yes_no>
+ passthrough := "passthrough=" <yes_no>
+ no_discard_passdown := "no_discard_passdown=" <yes_no>
+ yes_no := "y" | "n"
+
+ E.g.
+ When a 'cache' target is loaded, then IMA ASCII measurement log will have an entry
+ similar to the following, depicting what 'cache' attributes are measured in EVENT_DATA
+ for 'dm_table_load' event.
+ (converted from ASCII to text for readability)
+
+ dm_version=4.45.0;name=cache1,uuid=cache_uuid,major=253,minor=2,minor_count=1,num_targets=1;
+ target_index=0,target_begin=0,target_len=28672,target_name=cache,target_version=2.2.0,metadata_mode=rw,
+ cache_metadata_device=253:4,cache_device=253:3,cache_origin_device=253:5,writethrough=y,writeback=n,
+ passthrough=n,metadata2=y,no_discard_passdown=n;
+
+
+2. crypt
+---------
+The 'target_attributes' (described as part of EVENT_DATA in 'Table load'
+section above) has the following data format for 'crypt' target.
+
+::
+
+ target_attributes := <target_name> "," <target_version> "," <allow_discards> "," <same_cpu_crypt> ","
+                      <submit_from_crypt_cpus> "," <no_read_workqueue> "," <no_write_workqueue> ","
+                      <iv_large_sectors> "," <iv_large_sectors> "," [<integrity_tag_size> ","] [<cipher_auth> ","]
+                      [<sector_size> ","] [<cipher_string> ","] <key_size> "," <key_parts> ","
+                      <key_extra_size> "," <key_mac_size> ";"
+
+ target_name := "target_name=crypt"
+ target_version := "target_version=" <N> "." <N> "." <N>
+ allow_discards := "allow_discards=" <yes_no>
+ same_cpu_crypt := "same_cpu_crypt=" <yes_no>
+ submit_from_crypt_cpus := "submit_from_crypt_cpus=" <yes_no>
+ no_read_workqueue := "no_read_workqueue=" <yes_no>
+ no_write_workqueue := "no_write_workqueue=" <yes_no>
+ iv_large_sectors := "iv_large_sectors=" <yes_no>
+ integrity_tag_size := "integrity_tag_size=" <N>
+ cipher_auth := "cipher_auth=" <string>
+ sector_size := "sector_size="  <N>
+ cipher_string := "cipher_string="
+ key_size := "key_size="  <N>
+ key_parts := "key_parts="  <N>
+ key_extra_size := "key_extra_size="  <N>
+ key_mac_size := "key_mac_size="  <N>
+ yes_no := "y" | "n"
+
+ E.g.
+ When a 'crypt' target is loaded, then IMA ASCII measurement log will have an entry
+ similar to the following, depicting what 'crypt' attributes are measured in EVENT_DATA
+ for 'dm_table_load' event.
+ (converted from ASCII to text for readability)
+
+ dm_version=4.45.0;
+ name=crypt1,uuid=crypt_uuid1,major=253,minor=0,minor_count=1,num_targets=1;
+ target_index=0,target_begin=0,target_len=1953125,target_name=crypt,target_version=1.23.0,
+ allow_discards=y,same_cpu=n,submit_from_crypt_cpus=n,no_read_workqueue=n,no_write_workqueue=n,
+ iv_large_sectors=n,cipher_string=aes-xts-plain64,key_size=32,key_parts=1,key_extra_size=0,key_mac_size=0;
+
+3. integrity
 -------------
-<<documenatation in progress>>
+The 'target_attributes' (described as part of EVENT_DATA in 'Table load'
+section above) has the following data format for 'integrity' target.
+
+::
+
+ target_attributes := <target_name> "," <target_version> "," <dev_name> "," <start>
+                      <tag_size> "," <mode> "," [<meta_device> ","] [<block_size> ","] <recalculate> ","
+                      <allow_discards> "," <fix_padding> "," <fix_hmac> "," <legacy_recalculate> ","
+                      <journal_sectors> "," <interleave_sectors> "," <buffer_sectors> ";"
+
+ target_name := "target_name=integrity"
+ target_version := "target_version=" <N> "." <N> "." <N>
+ dev_name := "dev_name=" <device_name_str>
+ start := "start=" <N>
+ tag_size := "tag_size=" <N>
+ mode := "mode=" <integrity_mode_str>
+ integrity_mode_str := "J" | "B" | "D" | "R"
+ meta_device := "meta_device=" <meta_device_str>
+ block_size := "block_size=" <N>
+ recalculate := "recalculate=" <yes_no>
+ allow_discards := "allow_discards=" <yes_no>
+ fix_padding := "fix_padding=" <yes_no>
+ fix_hmac := "fix_hmac=" <yes_no>
+ legacy_recalculate := "legacy_recalculate=" <yes_no>
+ journal_sectors := "journal_sectors=" <N>
+ interleave_sectors := "interleave_sectors=" <N>
+ buffer_sectors := "buffer_sectors=" <N>
+ yes_no := "y" | "n"
+
+ E.g.
+ When a 'integrity' target is loaded, then IMA ASCII measurement log will have an entry
+ similar to the following, depicting what 'integrity' attributes are measured in EVENT_DATA
+ for 'dm_table_load' event.
+ (converted from ASCII to text for readability)
+
+ dm_version=4.45.0;
+ name=integrity1,uuid=,major=253,minor=1,minor_count=1,num_targets=1;
+ target_index=0,target_begin=0,target_len=7856,target_name=integrity,target_version=1.10.0,
+ dev_name=253:0,start=0,tag_size=32,mode=J,recalculate=n,allow_discards=n,fix_padding=n,
+ fix_hmac=n,legacy_recalculate=n,journal_sectors=88,interleave_sectors=32768,buffer_sectors=128;
+
+
+4. linear
+----------
+The 'target_attributes' (described as part of EVENT_DATA in 'Table load'
+section above) has the following data format for 'linear' target.
 
+::
 
-04. linear
-----------
-When a linear target is loaded, then IMA ASCII measurement log will have an entry
-similar to the following, depicting what linear attributes are measured in EVENT_DATA.
-
-(converted from ASCII to text for readability)
-10 a8c5ff755561c7a28146389d1514c318592af49a ima-buf sha256:4d73481ecce5eadba8ab084640d85bb9ca899af4d0a122989252a76efadc5b72
-table_load
-name=linear1,uuid=,major=253,minor=0,minor_count=1,num_targets=4;
-target_index=0,target_begin=0,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
-target_index=1,target_begin=2,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
-target_index=2,target_begin=4,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
-target_index=3,target_begin=6,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
-
-05. mirror
-----------
-When a mirror target is loaded, then IMA ASCII measurement log will have an entry
-similar to the following, depicting what mirror attributes are measured in EVENT_DATA.
-
-(converted from ASCII to text for readability)
-10 90ff9113a00c367df823595dc347425ce3bfc50a ima-buf sha256:8da0678ed3bf616533573d9e61e5342f2bd16cb0b3145a08262641a743806c2e
-table_load
-name=test-mirror,uuid=,major=253,minor=4,minor_count=1,num_targets=1;
-target_index=0,target_begin=0,target_len=1953125,target_name=mirror,target_version=1.14.0,
-nr_mirrors=2,mirror_device_0=253:2,mirror_device_0_status=A,mirror_device_1=253:3,mirror_device_1_status=A,
-handle_errors=y,keep_log=n,log_type_status=;
-
-06. multipath
--------------
-<<documenatation in progress>>
+ target_attributes := <target_name> "," <target_version> "," <device_name> <,> <start> ";"
 
-07. raid
---------
-When a raid target is loaded, then IMA ASCII measurement log will have an entry
-similar to the following, depicting what raid attributes are measured in EVENT_DATA.
+ target_name := "target_name=linear"
+ target_version := "target_version=" <N> "." <N> "." <N>
+ device_name := "device_name=" <linear_device_name_str>
+ start := "start=" <N>
 
-(converted from ASCII to text for readability)
-10 76cb30d0cd0fe099966f20f5c82e3a2ac29b21a0 ima-buf sha256:52250f20b27376fcfb348bdfa1e1cf5acfd6646e0f3ad1a72952cffd9f818753
-table_load
-name=test-raid1,uuid=,major=253,minor=2,minor_count=1,num_targets=1;
-target_index=0,target_begin=0,target_len=1953125,target_name=raid,target_version=1.15.1,
-raid_type=raid1,raid_disks=2,raid_state=idle,raid_device_0_status=A,raid_device_1_status=A;
+ E.g.
+ When a 'linear' target is loaded, then IMA ASCII measurement log will have an entry
+ similar to the following, depicting what 'linear' attributes are measured in EVENT_DATA
+ for 'dm_table_load' event.
+ (converted from ASCII to text for readability)
 
-08. snapshot
-------------
-<<documenatation in progress>>
+ dm_version=4.45.0;
+ name=linear1,uuid=linear_uuid1,major=253,minor=2,minor_count=1,num_targets=1;
+ target_index=0,target_begin=0,target_len=28672,target_name=linear,target_version=1.4.0,
+ device_name=253:1,start=2048;
 
-09. striped
+5. mirror
+----------
+The 'target_attributes' (described as part of EVENT_DATA in 'Table load'
+section above) has the following data format for 'mirror' target.
+
+::
+
+ target_attributes := <target_name> "," <target_version> "," <nr_mirrors> ","
+                      <mirror_device_data> "," <handle_errors> "," <keep_log> "," <log_type_status> ";"
+
+ target_name := "target_name=mirror"
+ target_version := "target_version=" <N> "." <N> "." <N>
+ nr_mirrors := "nr_mirrors=" <NR>
+ mirror_device_data := <mirror_device_row> | <mirror_device_data><mirror_device_row>
+                       mirror_device_row is repeated <NR> times - for <NR> described in <nr_mirrors>.
+ mirror_device_row := <mirror_device_name> "," <mirror_device_status>
+ mirror_device_name := "mirror_device_" <X> "=" <mirror_device_name_str>
+                       where <X> ranges from 0 to (<NR> -1) - for <NR> described in <nr_mirrors>.
+ mirror_device_status := "mirror_device_" <X> "_status=" <mirror_device_status_char>
+                         where <X> ranges from 0 to (<NR> -1) - for <NR> described in <nr_mirrors>.
+ mirror_device_status_char := "A" | "F" | "D" | "S" | "R" | "U"
+ handle_errors := "handle_errors=" <yes_no>
+ keep_log := "keep_log=" <yes_no>
+ log_type_status := "log_type_status=" <log_type_status_str>
+ yes_no := "y" | "n"
+
+ E.g.
+ When a 'mirror' target is loaded, then IMA ASCII measurement log will have an entry
+ similar to the following, depicting what 'mirror' attributes are measured in EVENT_DATA
+ for 'dm_table_load' event.
+ (converted from ASCII to text for readability)
+
+ dm_version=4.45.0;
+ name=mirror1,uuid=mirror_uuid1,major=253,minor=6,minor_count=1,num_targets=1;
+ target_index=0,target_begin=0,target_len=2048,target_name=mirror,target_version=1.14.0,nr_mirrors=2,
+    mirror_device_0=253:4,mirror_device_0_status=A,
+    mirror_device_1=253:5,mirror_device_1_status=A,
+ handle_errors=y,keep_log=n,log_type_status=;
+
+6. multipath
+-------------
+The 'target_attributes' (described as part of EVENT_DATA in 'Table load'
+section above) has the following data format for 'multipath' target.
+
+::
+
+ target_attributes := <target_name> "," <target_version> "," <nr_priority_groups>
+                      ["," <pg_state> "," <priority_groups> "," <priority_group_paths>] ";"
+
+ target_name := "target_name=multipath"
+ target_version := "target_version=" <N> "." <N> "." <N>
+ nr_priority_groups := "nr_priority_groups=" <NPG>
+ priority_groups := <priority_groups_row>|<priority_groups_row><priority_groups>
+ priority_groups_row := "pg_state_" <X> "=" <pg_state_str> "," "nr_pgpaths_" <X>  "=" <NPGP> ","
+                        "path_selector_name_" <X> "=" <string> "," <priority_group_paths>
+                        where <X> ranges from 0 to (<NPG> -1) - for <NPG> described in <nr_priority_groups>.
+ pg_state_str := "E" | "A" | "D"
+ <priority_group_paths> := <priority_group_paths_row> | <priority_group_paths_row><priority_group_paths>
+ priority_group_paths_row := "path_name_" <X> "_" <Y> "=" <string> "," "is_active_" <X> "_" <Y> "=" <is_active_str>
+                             "fail_count_" <X> "_" <Y> "=" <N> "," "path_selector_status_" <X> "_" <Y> "=" <path_selector_status_str>
+                             where <X> ranges from 0 to (<NPG> -1) - for <NPG> described in <nr_priority_groups>,
+                             and <Y> ranges from 0 to (<NPGP> -1) - for <NPGP> described in <priority_groups_row>.
+ is_active_str := "A" | "F"
+
+ E.g.
+ When a 'multipath' target is loaded, then IMA ASCII measurement log will have an entry
+ similar to the following, depicting what 'multipath' attributes are measured in EVENT_DATA
+ for 'dm_table_load' event.
+ (converted from ASCII to text for readability)
+
+ dm_version=4.45.0;
+ name=mp,uuid=,major=253,minor=0,minor_count=1,num_targets=1;
+ target_index=0,target_begin=0,target_len=2097152,target_name=multipath,target_version=1.14.0,nr_priority_groups=2,
+    pg_state_0=E,nr_pgpaths_0=2,path_selector_name_0=queue-length,
+        path_name_0_0=8:16,is_active_0_0=A,fail_count_0_0=0,path_selector_status_0_0=,
+        path_name_0_1=8:32,is_active_0_1=A,fail_count_0_1=0,path_selector_status_0_1=,
+    pg_state_1=E,nr_pgpaths_1=2,path_selector_name_1=queue-length,
+        path_name_1_0=8:48,is_active_1_0=A,fail_count_1_0=0,path_selector_status_1_0=,
+        path_name_1_1=8:64,is_active_1_1=A,fail_count_1_1=0,path_selector_status_1_1=;
+
+7. raid
+--------
+The 'target_attributes' (described as part of EVENT_DATA in 'Table load'
+section above) has the following data format for 'raid' target.
+
+::
+
+ target_attributes := <target_name> "," <target_version> "," <raid_type> "," <raid_disks> "," <raid_state>
+                      <raid_device_status> ["," journal_dev_mode] ";"
+
+ target_name := "target_name=raid"
+ target_version := "target_version=" <N> "." <N> "." <N>
+ raid_type := "raid_type=" <raid_type_str>
+ raid_disks := "raid_disks=" <NRD>
+ raid_state := "raid_state=" <raid_state_str>
+ raid_state_str := "frozen" | "reshape" |"resync" | "check" | "repair" | "recover" | "idle" |"undef"
+ raid_device_status := <raid_device_status_row> | <raid_device_status_row><raid_device_status>
+                       <raid_device_status_row> is repeated <NRD> times - for <NRD> described in <raid_disks>.
+ raid_device_status_row := "raid_device_" <X> "_status=" <raid_device_status_str>
+                           where <X> ranges from 0 to (<NRD> -1) - for <NRD> described in <raid_disks>.
+ raid_device_status_str := "A" | "D" | "a" | "-"
+ journal_dev_mode := "journal_dev_mode=" <journal_dev_mode_str>
+ journal_dev_mode_str := "writethrough" | "writeback" | "invalid"
+
+ E.g.
+ When a 'raid' target is loaded, then IMA ASCII measurement log will have an entry
+ similar to the following, depicting what 'raid' attributes are measured in EVENT_DATA
+ for 'dm_table_load' event.
+ (converted from ASCII to text for readability)
+
+ dm_version=4.45.0;
+ name=raid_LV1,uuid=uuid_raid_LV1,major=253,minor=12,minor_count=1,num_targets=1;
+ target_index=0,target_begin=0,target_len=2048,target_name=raid,target_version=1.15.1,
+ raid_type=raid10,raid_disks=4,raid_state=idle,
+    raid_device_0_status=A,
+    raid_device_1_status=A,
+    raid_device_2_status=A,
+    raid_device_3_status=A;
+
+
+8. snapshot
+------------
+The 'target_attributes' (described as part of EVENT_DATA in 'Table load'
+section above) has the following data format for 'snapshot' target.
+
+::
+
+ target_attributes := <target_name> "," <target_version> "," <snap_origin_name> ","
+                      <snap_cow_name> "," <snap_valid> "," <snap_merge_failed> "," <snapshot_overflowed> ";"
+
+ target_name := "target_name=snapshot"
+ target_version := "target_version=" <N> "." <N> "." <N>
+ snap_origin_name := "snap_origin_name=" <string>
+ snap_cow_name := "snap_cow_name=" <string>
+ snap_valid := "snap_valid=" <yes_no>
+ snap_merge_failed := "snap_merge_failed=" <yes_no>
+ snapshot_overflowed := "snapshot_overflowed=" <yes_no>
+ yes_no := "y" | "n"
+
+ E.g.
+ When a 'snapshot' target is loaded, then IMA ASCII measurement log will have an entry
+ similar to the following, depicting what 'snapshot' attributes are measured in EVENT_DATA
+ for 'dm_table_load' event.
+ (converted from ASCII to text for readability)
+
+ dm_version=4.45.0;
+ name=snap1,uuid=snap_uuid1,major=253,minor=13,minor_count=1,num_targets=1;
+ target_index=0,target_begin=0,target_len=4096,target_name=snapshot,target_version=1.16.0,
+ snap_origin_name=253:11,snap_cow_name=253:12,snap_valid=y,snap_merge_failed=n,snapshot_overflowed=n;
+
+9. striped
 -----------
-When a linear target is loaded, then IMA ASCII measurement log will have an entry
-similar to the following, depicting what linear attributes are measured in EVENT_DATA.
-
-(converted from ASCII to text for readability)
-10 7bd94fa8f799169b9f12d97b9dbdce4dc5509233 ima-buf sha256:0d148eda69887f7833f1a6042767b54359cd23b64fa941b9e1856879eee1f778
-table_load
-name=test-raid0,uuid=,major=253,minor=8,minor_count=1,num_targets=1;
-target_index=0,target_begin=0,target_len=7812096,target_name=striped,target_version=1.6.0,stripes=4,chunk_size=128,
-stripe_0_device_name=253:1,stripe_0_physical_start=0,stripe_0_status=A,
-stripe_1_device_name=253:3,stripe_1_physical_start=0,stripe_1_status=A,
-stripe_2_device_name=253:5,stripe_2_physical_start=0,stripe_2_status=A,
-stripe_3_device_name=253:7,stripe_3_physical_start=0,stripe_3_status=A;
+The 'target_attributes' (described as part of EVENT_DATA in 'Table load'
+section above) has the following data format for 'striped' target.
+
+::
+
+ target_attributes := <target_name> "," <target_version> "," <stripes> "," <chunk_size> ","
+                      <stripe_data> ";"
+
+ target_name := "target_name=striped"
+ target_version := "target_version=" <N> "." <N> "." <N>
+ stripes := "stripes=" <NS>
+ chunk_size := "chunk_size=" <N>
+ stripe_data := <stripe_data_row>|<stripe_data><stripe_data_row>
+ stripe_data_row := <stripe_device_name> "," <stripe_physical_start> "," <stripe_status>
+ stripe_device_name := "stripe_" <X> "_device_name=" <stripe_device_name_str>
+                       where <X> ranges from 0 to (<NS> -1) - for <NS> described in <stripes>.
+ stripe_physical_start := "stripe_" <X> "_physical_start=" <N>
+                           where <X> ranges from 0 to (<NS> -1) - for <NS> described in <stripes>.
+ stripe_status := "stripe_" <X> "_status=" <stripe_status_str>
+                  where <X> ranges from 0 to (<NS> -1) - for <NS> described in <stripes>.
+ stripe_status_str := "D" | "A"
+
+ E.g.
+ When a 'striped' target is loaded, then IMA ASCII measurement log will have an entry
+ similar to the following, depicting what 'striped' attributes are measured in EVENT_DATA
+ for 'dm_table_load' event.
+ (converted from ASCII to text for readability)
+
+ dm_version=4.45.0;
+ name=striped1,uuid=striped_uuid1,major=253,minor=5,minor_count=1,num_targets=1;
+ target_index=0,target_begin=0,target_len=640,target_name=striped,target_version=1.6.0,stripes=2,chunk_size=64,
+    stripe_0_device_name=253:0,stripe_0_physical_start=2048,stripe_0_status=A,
+    stripe_1_device_name=253:3,stripe_1_physical_start=2048,stripe_1_status=A;
 
 10. verity
 ----------
-When a verity target is loaded, then IMA ASCII measurement log will have an entry
-similar to the following, depicting what verity attributes are measured in EVENT_DATA.
-
-(converted from ASCII to text for readability)
-10 fced5f575b140fc0efac302c88a635174cd663da ima-buf sha256:021370c1cc93929460b06922c606334fb1d7ea5ecf04f2384f3157a446894283
-table_load
-name=test-verity,uuid=,major=253,minor=2,minor_count=1,num_targets=1;
-target_index=0,target_begin=0,target_len=1953120,target_name=verity,target_version=1.8.0,hash_failed=V,
-verity_version=1,data_device_name=253:1,hash_device_name=253:0,verity_algorithm=sha256,
-root_digest=29cb87e60ce7b12b443ba6008266f3e41e93e403d7f298f8e3f316b29ff89c5e,
-salt=e48da609055204e89ae53b655ca2216dd983cf3cb829f34f63a297d106d53e2d,
-ignore_zero_blocks=n,check_at_most_once=n;
+The 'target_attributes' (described as part of EVENT_DATA in 'Table load'
+section above) has the following data format for 'verity' target.
+
+::
+
+ target_attributes := <target_name> "," <target_version> "," <hash_failed> "," <verity_version> ","
+                      <data_device_name> "," <hash_device_name> "," <verity_algorithm> "," <root_digest> ","
+                      <salt> "," <ignore_zero_blocks> "," <check_at_most_once> ["," <root_hash_sig_key_desc>]
+                      ["," <verity_mode>] ";"
+
+ target_name := "target_name=verity"
+ target_version := "target_version=" <N> "." <N> "." <N>
+ hash_failed := "hash_failed=" <hash_failed_str>
+ hash_failed_str := "C" | "V"
+ verity_version := "verity_version=" <verity_version_str>
+ data_device_name := "data_device_name=" <data_device_name_str>
+ hash_device_name := "hash_device_name=" <hash_device_name_str>
+ verity_algorithm := "verity_algorithm=" <verity_algorithm_str>
+ root_digest := "root_digest=" <root_digest_str>
+ salt := "salt=" <salt_str>
+ salt_str := "-" <verity_salt_str>
+ ignore_zero_blocks := "ignore_zero_blocks=" <yes_no>
+ check_at_most_once := "check_at_most_once=" <yes_no>
+ root_hash_sig_key_desc := "root_hash_sig_key_desc="
+ verity_mode := "verity_mode=" <verity_mode_str>
+ verity_mode_str := "ignore_corruption" | "restart_on_corruption" | "panic_on_corruption" | "invalid"
+ yes_no := "y" | "n"
+
+ E.g.
+ When a 'verity' target is loaded, then IMA ASCII measurement log will have an entry
+ similar to the following, depicting what 'verity' attributes are measured in EVENT_DATA
+ for 'dm_table_load' event.
+ (converted from ASCII to text for readability)
+
+ dm_version=4.45.0;
+ name=test-verity,uuid=,major=253,minor=2,minor_count=1,num_targets=1;
+ target_index=0,target_begin=0,target_len=1953120,target_name=verity,target_version=1.8.0,hash_failed=V,
+ verity_version=1,data_device_name=253:1,hash_device_name=253:0,verity_algorithm=sha256,
+ root_digest=29cb87e60ce7b12b443ba6008266f3e41e93e403d7f298f8e3f316b29ff89c5e,
+ salt=e48da609055204e89ae53b655ca2216dd983cf3cb829f34f63a297d106d53e2d,
+ ignore_zero_blocks=n,check_at_most_once=n;
-- 
2.32.0

[dm-devel] [PATCH 6/6] dm ima: update dm documentation for ima measurement support

[Tushar Sugandhi]

The ima documentation for measuring DM targets (dm-ima.rst) is
missing the attribute information for the targets - 'cache', 'integrity',
'multipath', and 'snapshot'.  It is also missing the grammar for
various DM events and targets, which can help the attestation servers
to determine what data to expect for a given DM device.  Further,
the documentation needs to be updated to incorporate code changes
made to DM ima events and targets as part of this patch series.  For
instance, prefixing the event names with "dm_", adding the DM version to
events, prefixing the table hashes in the ima log with the 
hash algorithm etc.  There are warnings reported by 'make htmldocs' on 
dm-ima.rst, which need to be fixed.  And lastly, the expected behavior
needs to be documented when the configuration CONFIG_IMA_DISABLE_HTABLE
is disabled.

Update the documentation to add examples for 'cache', 'integrity',
'multipath', and 'snapshot' targets.  Add the grammar for
various DM events and targets in Backus Naur form,
so that the attestation servers can interpret and act on the ima 
measurements for DM target.  Fix htmldocs warnings in dm-ima.rst.  Update
the documentation to be consistent with the code changes that are part of
this patch series.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
---
 .../admin-guide/device-mapper/dm-ima.rst      | 827 +++++++++++++-----
 1 file changed, 618 insertions(+), 209 deletions(-)

diff --git a/Documentation/admin-guide/device-mapper/dm-ima.rst b/Documentation/admin-guide/device-mapper/dm-ima.rst
index 41894112ff26..a4aa50a828e0 100644
--- a/Documentation/admin-guide/device-mapper/dm-ima.rst
+++ b/Documentation/admin-guide/device-mapper/dm-ima.rst
@@ -26,9 +26,10 @@ fully trusting the system with business-critical data/workload.
 IMA kernel subsystem provides the necessary functionality for
 device mapper to measure the state and configuration of
 various block devices -
-  - BY device mapper itself, from within the kernel,
-  - in a tamper resistant way,
-  - and re-measured - triggered on state/configuration change.
+
+- by device mapper itself, from within the kernel,
+- in a tamper resistant way,
+- and re-measured - triggered on state/configuration change.
 
 Setting the IMA Policy:
 =======================
@@ -36,271 +37,679 @@ For IMA to measure the data on a given system, the IMA policy on the
 system needs to be updated to have following line, and the system needs
 to be restarted for the measurements to take effect.
 
-/etc/ima/ima-policy
- measure func=CRITICAL_DATA label=device-mapper template=ima-buf
+::
+
+ /etc/ima/ima-policy
+    measure func=CRITICAL_DATA label=device-mapper template=ima-buf
 
 The measurements will be reflected in the IMA logs, which are located at:
 
-/sys/kernel/security/integrity/ima/ascii_runtime_measurements
-/sys/kernel/security/integrity/ima/binary_runtime_measurements
+::
+
+ /sys/kernel/security/integrity/ima/ascii_runtime_measurements
+ /sys/kernel/security/integrity/ima/binary_runtime_measurements
 
 Then IMA ASCII measurement log has the following format:
-PCR TEMPLATE_DIGEST TEMPLATE ALG:EVENT_DIGEST EVENT_NAME EVENT_DATA
 
-PCR := Platform Configuration Register, in which the values are registered.
+::
+
+ <PCR> <TEMPLATE_DATA_DIGEST> <TEMPLATE_NAME> <TEMPLATE_DATA>
+
+ PCR := Platform Configuration Register, in which the values are registered.
        This is applicable if TPM chip is in use.
-TEMPLATE_DIGEST := Template digest of the IMA record.
-TEMPLATE := Template that registered the integrity value (e.g. ima-buf).
-ALG:EVENT_DIGEST = Algorithm to compute event digest, followed by digest of event data
-EVENT_NAME := Description of the event (e.g. 'table_load').
-EVENT_DATA := The event data to be measured.
 
-The DM target data measured by IMA subsystem can alternatively
-be queried from userspace by setting DM_IMA_MEASUREMENT_FLAG with
-DM_TABLE_STATUS_CMD.
+ TEMPLATE_DATA_DIGEST := Template data digest of the IMA record.
+ TEMPLATE_NAME := Template name that registered the integrity value (e.g. ima-buf).
+
+ TEMPLATE_DATA := <ALG> ":" <EVENT_DIGEST> <EVENT_NAME> <EVENT_DATA>
+                  It contains data for the specific event to be measured,
+                  in a given template data format.
+
+ ALG := Algorithm to compute event digest
+ EVENT_DIGEST := Digest of the event data
+ EVENT_NAME := Description of the event (e.g. 'dm_table_load').
+ EVENT_DATA := The event data to be measured.
+
+|
+
+| *NOTE #1:*
+| The DM target data measured by IMA subsystem can alternatively
+ be queried from userspace by setting DM_IMA_MEASUREMENT_FLAG with
+ DM_TABLE_STATUS_CMD.
+
+|
+
+| *NOTE #2:*
+| The Kernel configuration CONFIG_IMA_DISABLE_HTABLE allows measurement of duplicate records.
+| To support recording duplicate IMA events in the IMA log, the Kernel needs to be configured with
+ CONFIG_IMA_DISABLE_HTABLE=y.
 
 Supported Device States:
 ========================
-Following device state changes will trigger IMA measurements.
-01. Table load
-02. Device resume
-03. Device remove
-04. Table clear
-05. Device rename
-
-01. Table load:
+Following device state changes will trigger IMA measurements:
+
+ 1. Table load
+ #. Device resume
+ #. Device remove
+ #. Table clear
+ #. Device rename
+
+1. Table load:
 ---------------
 When a new table is loaded in a device's inactive table slot,
 the device information and target specific details from the
 targets in the table are measured.
 
-For instance, if a linear device is created with the following table entries,
-# dmsetup create linear1
-0 2 linear /dev/loop0 512
-2 2 linear /dev/loop0 512
-4 2 linear /dev/loop0 512
-6 2 linear /dev/loop0 512
-
-Then IMA ASCII measurement log will have an entry with:
-EVENT_NAME := table_load
-EVENT_DATA := [device_data];[target_data_row_1];[target_data_row_2];...[target_data_row_n];
-
-E.g.
-(converted from ASCII to text for readability)
-10 a8c5ff755561c7a28146389d1514c318592af49a ima-buf sha256:4d73481ecce5eadba8ab084640d85bb9ca899af4d0a122989252a76efadc5b72
-table_load
-name=linear1,uuid=,major=253,minor=0,minor_count=1,num_targets=4;
-target_index=0,target_begin=0,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
-target_index=1,target_begin=2,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
-target_index=2,target_begin=4,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
-target_index=3,target_begin=6,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
-
-02. Device resume:
+The IMA measurement log has the following format for 'dm_table_load':
+
+::
+
+ EVENT_NAME := "dm_table_load"
+ EVENT_DATA := <dm_version_str> ";" <device_metadata> ";" <table_load_data>
+
+ dm_version_str := "dm_version=" <N> "." <N> "." <N>
+                  Same as Device Mapper driver version.
+ device_metadata := <device_name> "," <device_uuid> "," <device_major> "," <device_minor> ","
+                   <minor_count> "," <num_device_targets> ";"
+
+ device_name := "name=" <dm-device-name>
+ device_uuid := "uuid=" <dm-device-uuid>
+ device_major := "major=" <N>
+ device_minor := "minor=" <N>
+ minor_count := "minor_count=" <N>
+ num_device_targets := "num_targets=" <N>
+ dm-device-name := Name of the device. If it contains special characters like '\', ',', ';',
+                   they are prefixed with '\'.
+ dm-device-uuid := UUID of the device. If it contains special characters like '\', ',', ';',
+                   they are prefixed with '\'.
+
+ table_load_data := <target_data>
+                    Represents the data (as name=value pairs) from various targets in the table,
+                    which is being loaded into the DM device's inactive table slot.
+ target_data := <target_data_row> | <target_data><target_data_row>
+
+ target_data_row := <target_index> "," <target_begin> "," <target_len> "," <target_name> ","
+                    <target_version> "," <target_attributes> ";"
+ target_index := "target_index=" <N>
+                 Represents nth target in the table (from 0 to N-1 targets specified in <num_device_targets>)
+                 If all the data for N targets doesn't fit in the given buffer - then the data that fits
+                 in the buffer (say from target 0 to x) is measured in a given IMA event.
+                 The remaining data from targets x+1 to N-1 is measured in the subsequent IMA events,
+                 with the same format as that of 'dm_table_load'
+                 i.e. <dm_version_str> ";" <device_metadata> ";" <table_load_data>.
+
+ target_begin := "target_begin=" <N>
+ target_len := "target_len=" <N>
+ target_name := Name of the target. 'linear', 'crypt', 'integrity' etc.
+                The targets that are supported for IMA measurements are documented below in the
+                'Supported targets' section.
+ target_version := "target_version=" <N> "." <N> "." <N>
+ target_attributes := Data containing comma separated list of name=value pairs of target specific attributes.
+
+ For instance, if a linear device is created with the following table entries,
+  # dmsetup create linear1
+  0 2 linear /dev/loop0 512
+  2 2 linear /dev/loop0 512
+  4 2 linear /dev/loop0 512
+  6 2 linear /dev/loop0 512
+
+ Then IMA ASCII measurement log will have the following entry:
+ (converted from ASCII to text for readability)
+
+ 10 a8c5ff755561c7a28146389d1514c318592af49a ima-buf sha256:4d73481ecce5eadba8ab084640d85bb9ca899af4d0a122989252a76efadc5b72
+ dm_table_load
+ dm_version=4.45.0;
+ name=linear1,uuid=,major=253,minor=0,minor_count=1,num_targets=4;
+ target_index=0,target_begin=0,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
+ target_index=1,target_begin=2,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
+ target_index=2,target_begin=4,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
+ target_index=3,target_begin=6,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
+
+2. Device resume:
 ------------------
-When a suspended device is resumed, the device information and a sha256 hash of the
+When a suspended device is resumed, the device information and the hash of the
 data from previous load of an active table are measured.
 
-For instance, if a linear device is resumed with the following command,
-#dmsetup resume linear1
+The IMA measurement log has the following format for 'dm_device_resume':
 
-Then IMA ASCII measurement log will have an entry with:
-EVENT_NAME := device_resume
-EVENT_DATA := [device_data];active_table_hash=(sha256hash([device_data];[target_data_row_1];...[target_data_row_n]);
-              current_device_capacity=<N>;
+::
 
-E.g.
-(converted from ASCII to text for readability)
-10 56c00cc062ffc24ccd9ac2d67d194af3282b934e ima-buf sha256:e7d12c03b958b4e0e53e7363a06376be88d98a1ac191fdbd3baf5e4b77f329b6
-device_resume
-name=linear1,uuid=,major=253,minor=0,minor_count=1,num_targets=4;
-active_table_hash=4d73481ecce5eadba8ab084640d85bb9ca899af4d0a122989252a76efadc5b72;current_device_capacity=8;
+ EVENT_NAME := "dm_device_resume"
+ EVENT_DATA := <dm_version_str> ";" <device_metadata> ";" <active_table_hash> ";" <current_device_capacity> ";"
 
-03. Device remove:
-------------------
-When a device is removed, the device information and a sha256 hash of the
-data from an active and inactive table are measured.
+ dm_version_str := As described in the 'Table load' section above.
+ device_metadata := As described in the 'Table load' section above.
+ active_table_hash := "active_table_hash=" <table_hash_alg> ":" <table_hash>
+                      Rerpresents the hash of the IMA data being measured for the
+                      active table for the device.
+ table_hash_alg := Algorithm used to compute the hash.
+ table_hash := Hash of the (<dm_version_str> ";" <device_metadata> ";" <table_load_data> ";")
+               as described in the 'dm_table_load' above.
+               Note: If the table_load data spans across multiple IMA 'dm_table_load'
+               events for a given device, the hash is computed combining all the event data
+               i.e. (<dm_version_str> ";" <device_metadata> ";" <table_load_data> ";")
+               across all those events.
+ current_device_capacity := "current_device_capacity=" <N>
 
-For instance, if a linear device is removed with the following command,
-# dmsetup remove linear1
+ For instance, if a linear device is resumed with the following command,
+ #dmsetup resume linear1
 
-Then IMA ASCII measurement log will have an entry with:
-EVENT_NAME := device_remove
-EVENT_DATA := [device_active_metadata];[device_inactive_metadata];
-              [active_table_hash=(sha256hash([device_active_metadata];[active_table_row_1];...[active_table_row_n]),
-              [inactive_table_hash=(sha256hash([device_inactive_metadata];[inactive_table_row_1];...[inactive_table_row_n]),
-              remove_all=[y|n];current_device_capacity=<N>;
+ then IMA ASCII measurement log will have an entry with:
+ (converted from ASCII to text for readability)
 
-E.g
-(converted from ASCII to text for readability)
-10 499812b621b705061c4514d643894483e16d2619 ima-buf sha256:c3f26b02f09bf5b464925589454bdd4d354077ce430fd1e75c9e96ce29cd1cad
-device_remove
-device_active_metadata=name=linear1,uuid=,major=253,minor=0,minor_count=1,num_targets=4;
-device_inactive_metadata=name=linear1,uuid=,major=253,minor=0,minor_count=1,num_targets=2;
-active_table_hash=4d73481ecce5eadba8ab084640d85bb9ca899af4d0a122989252a76efadc5b72,
-inactive_table_hash=5596cc857b0e887fd0c5d58dc6382513284596b07f09fd37efae2da224bd521d,remove_all=n;
-current_device_capacity=8;
+ 10 56c00cc062ffc24ccd9ac2d67d194af3282b934e ima-buf sha256:e7d12c03b958b4e0e53e7363a06376be88d98a1ac191fdbd3baf5e4b77f329b6
+ dm_device_resume
+ dm_version=4.45.0;
+ name=linear1,uuid=,major=253,minor=0,minor_count=1,num_targets=4;
+ active_table_hash=sha256:4d73481ecce5eadba8ab084640d85bb9ca899af4d0a122989252a76efadc5b72;current_device_capacity=8;
 
+3. Device remove:
+------------------
+When a device is removed, the device information and a sha256 hash of the
+data from an active and inactive table are measured.
 
-04. Table clear:
+The IMA measurement log has the following format for 'dm_device_remove':
+
+::
+
+ EVENT_NAME := "dm_device_remove"
+ EVENT_DATA := <dm_version_str> ";" <device_active_metadata> ";" <device_inactive_metadata> ";"
+               <active_table_hash> "," <inactive_table_hash> "," <remove_all> ";" <current_device_capacity> ";"
+
+ dm_version_str := As described in the 'Table load' section above.
+ device_active_metadata := Device metadata that reflects the currently loaded active table.
+                           The format is same as 'device_metadata' described in the 'Table load' section above.
+ device_inactive_metadata := Device metadata that reflects the inactive table.
+                             The format is same as 'device_metadata' described in the 'Table load' section above.
+ active_table_hash := Hash of the currently loaded active table.
+                      The format is same as 'active_table_hash' described in the 'Device resume' section above.
+ inactive_table_hash :=  Hash of the inactive table.
+                         The format is same as 'active_table_hash' described in the 'Device resume' section above.
+ remove_all := "remove_all=" <yes_no>
+ yes_no := "y" | "n"
+ current_device_capacity := "current_device_capacity=" <N>
+
+ For instance, if a linear device is removed with the following command,
+  #dmsetup remove l1
+
+ then IMA ASCII measurement log will have the following entry:
+ (converted from ASCII to text for readability)
+
+ 10 790e830a3a7a31590824ac0642b3b31c2d0e8b38 ima-buf sha256:ab9f3c959367a8f5d4403d6ce9c3627dadfa8f9f0e7ec7899299782388de3840
+ dm_device_remove
+ dm_version=4.45.0;
+ device_active_metadata=name=l1,uuid=,major=253,minor=2,minor_count=1,num_targets=2;
+ device_inactive_metadata=name=l1,uuid=,major=253,minor=2,minor_count=1,num_targets=1;
+ active_table_hash=sha256:4a7e62efaebfc86af755831998b7db6f59b60d23c9534fb16a4455907957953a,
+ inactive_table_hash=sha256:9d79c175bc2302d55a183e8f50ad4bafd60f7692fd6249e5fd213e2464384b86,remove_all=n;
+ current_device_capacity=2048;
+
+4. Table clear:
 ----------------
 When an inactive table is cleared from the device, the device information and a sha256 hash of the
 data from an inactive table are measured.
 
-For instance, if a linear device's inactive table is cleared with the following command,
+The IMA measurement log has the following format for 'dm_table_clear':
+
+::
 
-# dmsetup clear linear1
+ EVENT_NAME := "dm_table_clear"
+ EVENT_DATA := <dm_version_str> ";" <device_inactive_metadata> ";" <inactive_table_hash> ";" <current_device_capacity> ";"
 
-Then IMA ASCII measurement log will have an entry with:
-EVENT_NAME := table_clear
-EVENT_DATA := [device_data];inactive_table_hash=(sha256hash([device_data];[inactive_table_row_1];...[inactive_table_row_n]);
-current_device_capacity=<N>;
+ dm_version_str := As described in the 'Table load' section above.
+ device_inactive_metadata := Device metadata that was captured during the load time inactive table being cleared.
+                             The format is same as 'device_metadata' described in the 'Table load' section above.
+ inactive_table_hash := Hash of the inactive table being cleared from the device.
+                        The format is same as 'active_table_hash' described in the 'Device resume' section above.
+ current_device_capacity := "current_device_capacity=" <N>
 
-E.g.
-(converted from ASCII to text for readability)
-10 9c11e284d792875352d51c09f6643c96649484be ima-buf sha256:84b22b364ea4d8264fa33c38635c18ef448fa9077731fa7e5f969b1da2003ea4
-table_clear
-name=linear1,uuid=,major=253,minor=0,minor_count=1,num_targets=2;
-inactive_table_hash=5596cc857b0e887fd0c5d58dc6382513284596b07f09fd37efae2da224bd521d;current_device_capacity=0;
+ For instance, if a linear device's inactive table is cleared,
+  #dmsetup clear l1
 
+ then IMA ASCII measurement log will have an entry with:
+ (converted from ASCII to text for readability)
 
-05. Device rename:
+ 10 77d347408f557f68f0041acb0072946bb2367fe5 ima-buf sha256:42f9ca22163fdfa548e6229dece2959bc5ce295c681644240035827ada0e1db5
+ dm_table_clear
+ dm_version=4.45.0;
+ name=l1,uuid=,major=253,minor=2,minor_count=1,num_targets=1;
+ inactive_table_hash=sha256:75c0dc347063bf474d28a9907037eba060bfe39d8847fc0646d75e149045d545;current_device_capacity=1024;
+
+5. Device rename:
 ------------------
 When an device's NAME or UUID is changed, the device information and the new NAME and UUID
 are measured.
 
-For instance, if a linear device's name is changed with the following command,
+The IMA measurement log has the following format for 'dm_device_rename':
+
+::
+
+ EVENT_NAME := "dm_device_rename"
+ EVENT_DATA := <dm_version_str> ";" <device_active_metadata> ";" <new_device_name> "," <new_device_uuid> ";" <current_device_capacity> ";"
+
+ dm_version_str := As described in the 'Table load' section above.
+ device_active_metadata := Device metadata that reflects the currently loaded active table.
+                           The format is same as 'device_metadata' described in the 'Table load' section above.
+ new_device_name := "new_name=" <dm-device-name>
+ dm-device-name := Same as <dm-device-name> described in 'Table load' section above
+ new_device_uuid := "new_uuid=" <dm-device-uuid>
+ dm-device-uuid := Same as <dm-device-uuid> described in 'Table load' section above
+ current_device_capacity := "current_device_capacity=" <N>
+
+ E.g 1: if a linear device's name is changed with the following command,
+  #dmsetup rename linear1 --setuuid 1234-5678
 
-#dmsetup rename linear1 linear=2
-Then IMA ASCII measurement log will have an entry with:
-EVENT_NAME := device_rename
-EVENT_DATA := [current_device_data];new_name=<new_name_value>;new_uuid=<new_uuid_value>;current_device_capacity=<N>;
+ then IMA ASCII measurement log will have an entry with:
+ (converted from ASCII to text for readability)
 
-E.g 1:
-#dmsetup rename linear1 --setuuid 1234-5678
+ 10 8b0423209b4c66ac1523f4c9848c9b51ee332f48 ima-buf sha256:6847b7258134189531db593e9230b257c84f04038b5a18fd2e1473860e0569ac
+ dm_device_rename
+ dm_version=4.45.0;
+ name=linear1,uuid=,major=253,minor=2,minor_count=1,num_targets=1;new_name=linear1,new_uuid=1234-5678;
+ current_device_capacity=1024;
 
-IMA Log entry:
-(converted from ASCII to text for readability)
-10 7380ef4d1349fe1ebd74affa54e9fcc960e3cbf5 ima-buf sha256:9759e36a17a967ea43c1bf3455279395a40bd0401105ec5ad8edb9a52054efc7
-device_rename
-name=linear1,uuid=,major=253,minor=0,minor_count=1,num_targets=1;new_name=linear1,new_uuid=1234-5678;current_device_capacity=2;
+ E.g 2:  if a linear device's name is changed with the following command,
+  # dmsetup rename linear1 linear=2
 
-E.g 2:
-# dmsetup rename linear1 linear=2
-10 092c8266fc36e44f74c59f123ecfe15310f249f4 ima-buf sha256:4cf8b85c81fa6fedaeb602b05019124dbbb0605dce58fcdeea56887a8a3874cd
-device_rename
-name=linear1,uuid=1234-5678,major=253,minor=0,minor_count=1,num_targets=1;new_name=linear\=2,new_uuid=1234-5678;current_device_capacity=2;
+ then IMA ASCII measurement log will have an entry with:
+ (converted from ASCII to text for readability)
 
+ 10 bef70476b99c2bdf7136fae033aa8627da1bf76f ima-buf sha256:8c6f9f53b9ef9dc8f92a2f2cca8910e622543d0f0d37d484870cb16b95111402
+ dm_device_rename
+ dm_version=4.45.0;
+ name=linear1,uuid=1234-5678,major=253,minor=2,minor_count=1,num_targets=1;
+ new_name=linear\=2,new_uuid=1234-5678;
+ current_device_capacity=1024;
 
 Supported targets:
 ==================
-Following targets are supported to measure their data using IMA.
-
-01. cache
-02. crypt
-03. integrity
-04. linear
-05. mirror
-06. multipath
-07. raid
-08. snapshot
-09. striped
-10. verity
 
-01. cache
----------
-<<documenatation in progress>>
+Following targets are supported to measure their data using IMA:
+
+ 1. cache
+ #. crypt
+ #. integrity
+ #. linear
+ #. mirror
+ #. multipath
+ #. raid
+ #. snapshot
+ #. striped
+ #. verity
 
-02. crypt
+1. cache
 ---------
-When a crypt target is loaded, then IMA ASCII measurement log will have an entry
-similar to the following, depicting what crypt attributes are measured in EVENT_DATA.
-
-(converted from ASCII to text for readability)
-10 fe3b80a35b155bd282df778e2625066c05fc068c ima-buf sha256:2d86ce9d6f16a4a97607318aa123ae816e0ceadefeea7903abf7f782f2cb78ad
-table_load
-name=test-crypt,uuid=,major=253,minor=0,minor_count=1,num_targets=1;
-target_index=0,target_begin=0,target_len=1953125,target_name=crypt,target_version=1.23.0,
-allow_discards=y,same_cpu=n,submit_from_crypt_cpus=n,no_read_workqueue=n,no_write_workqueue=n,
-iv_large_sectors=n,cipher_string=aes-xts-plain64,key_size=32,key_parts=1,key_extra_size=0,key_mac_size=0;
-
-03. integrity
+The 'target_attributes' (described as part of EVENT_DATA in 'Table load'
+section above) has the following data format for 'cache' target.
+
+::
+
+ target_attributes := <target_name> "," <target_version> "," <metadata_mode> "," <cache_metadata_device> ","
+                      <cache_device> "," <cache_origin_device> "," <writethrough> "," <writeback> ","
+                      <passthrough> "," <no_discard_passdown> ";"
+
+ target_name := "target_name=cache"
+ target_version := "target_version=" <N> "." <N> "." <N>
+ metadata_mode := "metadata_mode=" <cache_metadata_mode>
+ cache_metadata_mode := "fail" | "ro" | "rw"
+ cache_device := "cache_device=" <cache_device_name_string>
+ cache_origin_device := "cache_origin_device=" <cache_origin_device_string>
+ writethrough := "writethrough=" <yes_no>
+ writeback := "writeback=" <yes_no>
+ passthrough := "passthrough=" <yes_no>
+ no_discard_passdown := "no_discard_passdown=" <yes_no>
+ yes_no := "y" | "n"
+
+ E.g.
+ When a 'cache' target is loaded, then IMA ASCII measurement log will have an entry
+ similar to the following, depicting what 'cache' attributes are measured in EVENT_DATA
+ for 'dm_table_load' event.
+ (converted from ASCII to text for readability)
+
+ dm_version=4.45.0;name=cache1,uuid=cache_uuid,major=253,minor=2,minor_count=1,num_targets=1;
+ target_index=0,target_begin=0,target_len=28672,target_name=cache,target_version=2.2.0,metadata_mode=rw,
+ cache_metadata_device=253:4,cache_device=253:3,cache_origin_device=253:5,writethrough=y,writeback=n,
+ passthrough=n,metadata2=y,no_discard_passdown=n;
+
+
+2. crypt
+---------
+The 'target_attributes' (described as part of EVENT_DATA in 'Table load'
+section above) has the following data format for 'crypt' target.
+
+::
+
+ target_attributes := <target_name> "," <target_version> "," <allow_discards> "," <same_cpu_crypt> ","
+                      <submit_from_crypt_cpus> "," <no_read_workqueue> "," <no_write_workqueue> ","
+                      <iv_large_sectors> "," <iv_large_sectors> "," [<integrity_tag_size> ","] [<cipher_auth> ","]
+                      [<sector_size> ","] [<cipher_string> ","] <key_size> "," <key_parts> ","
+                      <key_extra_size> "," <key_mac_size> ";"
+
+ target_name := "target_name=crypt"
+ target_version := "target_version=" <N> "." <N> "." <N>
+ allow_discards := "allow_discards=" <yes_no>
+ same_cpu_crypt := "same_cpu_crypt=" <yes_no>
+ submit_from_crypt_cpus := "submit_from_crypt_cpus=" <yes_no>
+ no_read_workqueue := "no_read_workqueue=" <yes_no>
+ no_write_workqueue := "no_write_workqueue=" <yes_no>
+ iv_large_sectors := "iv_large_sectors=" <yes_no>
+ integrity_tag_size := "integrity_tag_size=" <N>
+ cipher_auth := "cipher_auth=" <string>
+ sector_size := "sector_size="  <N>
+ cipher_string := "cipher_string="
+ key_size := "key_size="  <N>
+ key_parts := "key_parts="  <N>
+ key_extra_size := "key_extra_size="  <N>
+ key_mac_size := "key_mac_size="  <N>
+ yes_no := "y" | "n"
+
+ E.g.
+ When a 'crypt' target is loaded, then IMA ASCII measurement log will have an entry
+ similar to the following, depicting what 'crypt' attributes are measured in EVENT_DATA
+ for 'dm_table_load' event.
+ (converted from ASCII to text for readability)
+
+ dm_version=4.45.0;
+ name=crypt1,uuid=crypt_uuid1,major=253,minor=0,minor_count=1,num_targets=1;
+ target_index=0,target_begin=0,target_len=1953125,target_name=crypt,target_version=1.23.0,
+ allow_discards=y,same_cpu=n,submit_from_crypt_cpus=n,no_read_workqueue=n,no_write_workqueue=n,
+ iv_large_sectors=n,cipher_string=aes-xts-plain64,key_size=32,key_parts=1,key_extra_size=0,key_mac_size=0;
+
+3. integrity
 -------------
-<<documenatation in progress>>
+The 'target_attributes' (described as part of EVENT_DATA in 'Table load'
+section above) has the following data format for 'integrity' target.
+
+::
+
+ target_attributes := <target_name> "," <target_version> "," <dev_name> "," <start>
+                      <tag_size> "," <mode> "," [<meta_device> ","] [<block_size> ","] <recalculate> ","
+                      <allow_discards> "," <fix_padding> "," <fix_hmac> "," <legacy_recalculate> ","
+                      <journal_sectors> "," <interleave_sectors> "," <buffer_sectors> ";"
+
+ target_name := "target_name=integrity"
+ target_version := "target_version=" <N> "." <N> "." <N>
+ dev_name := "dev_name=" <device_name_str>
+ start := "start=" <N>
+ tag_size := "tag_size=" <N>
+ mode := "mode=" <integrity_mode_str>
+ integrity_mode_str := "J" | "B" | "D" | "R"
+ meta_device := "meta_device=" <meta_device_str>
+ block_size := "block_size=" <N>
+ recalculate := "recalculate=" <yes_no>
+ allow_discards := "allow_discards=" <yes_no>
+ fix_padding := "fix_padding=" <yes_no>
+ fix_hmac := "fix_hmac=" <yes_no>
+ legacy_recalculate := "legacy_recalculate=" <yes_no>
+ journal_sectors := "journal_sectors=" <N>
+ interleave_sectors := "interleave_sectors=" <N>
+ buffer_sectors := "buffer_sectors=" <N>
+ yes_no := "y" | "n"
+
+ E.g.
+ When a 'integrity' target is loaded, then IMA ASCII measurement log will have an entry
+ similar to the following, depicting what 'integrity' attributes are measured in EVENT_DATA
+ for 'dm_table_load' event.
+ (converted from ASCII to text for readability)
+
+ dm_version=4.45.0;
+ name=integrity1,uuid=,major=253,minor=1,minor_count=1,num_targets=1;
+ target_index=0,target_begin=0,target_len=7856,target_name=integrity,target_version=1.10.0,
+ dev_name=253:0,start=0,tag_size=32,mode=J,recalculate=n,allow_discards=n,fix_padding=n,
+ fix_hmac=n,legacy_recalculate=n,journal_sectors=88,interleave_sectors=32768,buffer_sectors=128;
+
+
+4. linear
+----------
+The 'target_attributes' (described as part of EVENT_DATA in 'Table load'
+section above) has the following data format for 'linear' target.
 
+::
 
-04. linear
-----------
-When a linear target is loaded, then IMA ASCII measurement log will have an entry
-similar to the following, depicting what linear attributes are measured in EVENT_DATA.
-
-(converted from ASCII to text for readability)
-10 a8c5ff755561c7a28146389d1514c318592af49a ima-buf sha256:4d73481ecce5eadba8ab084640d85bb9ca899af4d0a122989252a76efadc5b72
-table_load
-name=linear1,uuid=,major=253,minor=0,minor_count=1,num_targets=4;
-target_index=0,target_begin=0,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
-target_index=1,target_begin=2,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
-target_index=2,target_begin=4,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
-target_index=3,target_begin=6,target_len=2,target_name=linear,target_version=1.4.0,device_name=7:0,start=512;
-
-05. mirror
-----------
-When a mirror target is loaded, then IMA ASCII measurement log will have an entry
-similar to the following, depicting what mirror attributes are measured in EVENT_DATA.
-
-(converted from ASCII to text for readability)
-10 90ff9113a00c367df823595dc347425ce3bfc50a ima-buf sha256:8da0678ed3bf616533573d9e61e5342f2bd16cb0b3145a08262641a743806c2e
-table_load
-name=test-mirror,uuid=,major=253,minor=4,minor_count=1,num_targets=1;
-target_index=0,target_begin=0,target_len=1953125,target_name=mirror,target_version=1.14.0,
-nr_mirrors=2,mirror_device_0=253:2,mirror_device_0_status=A,mirror_device_1=253:3,mirror_device_1_status=A,
-handle_errors=y,keep_log=n,log_type_status=;
-
-06. multipath
--------------
-<<documenatation in progress>>
+ target_attributes := <target_name> "," <target_version> "," <device_name> <,> <start> ";"
 
-07. raid
---------
-When a raid target is loaded, then IMA ASCII measurement log will have an entry
-similar to the following, depicting what raid attributes are measured in EVENT_DATA.
+ target_name := "target_name=linear"
+ target_version := "target_version=" <N> "." <N> "." <N>
+ device_name := "device_name=" <linear_device_name_str>
+ start := "start=" <N>
 
-(converted from ASCII to text for readability)
-10 76cb30d0cd0fe099966f20f5c82e3a2ac29b21a0 ima-buf sha256:52250f20b27376fcfb348bdfa1e1cf5acfd6646e0f3ad1a72952cffd9f818753
-table_load
-name=test-raid1,uuid=,major=253,minor=2,minor_count=1,num_targets=1;
-target_index=0,target_begin=0,target_len=1953125,target_name=raid,target_version=1.15.1,
-raid_type=raid1,raid_disks=2,raid_state=idle,raid_device_0_status=A,raid_device_1_status=A;
+ E.g.
+ When a 'linear' target is loaded, then IMA ASCII measurement log will have an entry
+ similar to the following, depicting what 'linear' attributes are measured in EVENT_DATA
+ for 'dm_table_load' event.
+ (converted from ASCII to text for readability)
 
-08. snapshot
-------------
-<<documenatation in progress>>
+ dm_version=4.45.0;
+ name=linear1,uuid=linear_uuid1,major=253,minor=2,minor_count=1,num_targets=1;
+ target_index=0,target_begin=0,target_len=28672,target_name=linear,target_version=1.4.0,
+ device_name=253:1,start=2048;
 
-09. striped
+5. mirror
+----------
+The 'target_attributes' (described as part of EVENT_DATA in 'Table load'
+section above) has the following data format for 'mirror' target.
+
+::
+
+ target_attributes := <target_name> "," <target_version> "," <nr_mirrors> ","
+                      <mirror_device_data> "," <handle_errors> "," <keep_log> "," <log_type_status> ";"
+
+ target_name := "target_name=mirror"
+ target_version := "target_version=" <N> "." <N> "." <N>
+ nr_mirrors := "nr_mirrors=" <NR>
+ mirror_device_data := <mirror_device_row> | <mirror_device_data><mirror_device_row>
+                       mirror_device_row is repeated <NR> times - for <NR> described in <nr_mirrors>.
+ mirror_device_row := <mirror_device_name> "," <mirror_device_status>
+ mirror_device_name := "mirror_device_" <X> "=" <mirror_device_name_str>
+                       where <X> ranges from 0 to (<NR> -1) - for <NR> described in <nr_mirrors>.
+ mirror_device_status := "mirror_device_" <X> "_status=" <mirror_device_status_char>
+                         where <X> ranges from 0 to (<NR> -1) - for <NR> described in <nr_mirrors>.
+ mirror_device_status_char := "A" | "F" | "D" | "S" | "R" | "U"
+ handle_errors := "handle_errors=" <yes_no>
+ keep_log := "keep_log=" <yes_no>
+ log_type_status := "log_type_status=" <log_type_status_str>
+ yes_no := "y" | "n"
+
+ E.g.
+ When a 'mirror' target is loaded, then IMA ASCII measurement log will have an entry
+ similar to the following, depicting what 'mirror' attributes are measured in EVENT_DATA
+ for 'dm_table_load' event.
+ (converted from ASCII to text for readability)
+
+ dm_version=4.45.0;
+ name=mirror1,uuid=mirror_uuid1,major=253,minor=6,minor_count=1,num_targets=1;
+ target_index=0,target_begin=0,target_len=2048,target_name=mirror,target_version=1.14.0,nr_mirrors=2,
+    mirror_device_0=253:4,mirror_device_0_status=A,
+    mirror_device_1=253:5,mirror_device_1_status=A,
+ handle_errors=y,keep_log=n,log_type_status=;
+
+6. multipath
+-------------
+The 'target_attributes' (described as part of EVENT_DATA in 'Table load'
+section above) has the following data format for 'multipath' target.
+
+::
+
+ target_attributes := <target_name> "," <target_version> "," <nr_priority_groups>
+                      ["," <pg_state> "," <priority_groups> "," <priority_group_paths>] ";"
+
+ target_name := "target_name=multipath"
+ target_version := "target_version=" <N> "." <N> "." <N>
+ nr_priority_groups := "nr_priority_groups=" <NPG>
+ priority_groups := <priority_groups_row>|<priority_groups_row><priority_groups>
+ priority_groups_row := "pg_state_" <X> "=" <pg_state_str> "," "nr_pgpaths_" <X>  "=" <NPGP> ","
+                        "path_selector_name_" <X> "=" <string> "," <priority_group_paths>
+                        where <X> ranges from 0 to (<NPG> -1) - for <NPG> described in <nr_priority_groups>.
+ pg_state_str := "E" | "A" | "D"
+ <priority_group_paths> := <priority_group_paths_row> | <priority_group_paths_row><priority_group_paths>
+ priority_group_paths_row := "path_name_" <X> "_" <Y> "=" <string> "," "is_active_" <X> "_" <Y> "=" <is_active_str>
+                             "fail_count_" <X> "_" <Y> "=" <N> "," "path_selector_status_" <X> "_" <Y> "=" <path_selector_status_str>
+                             where <X> ranges from 0 to (<NPG> -1) - for <NPG> described in <nr_priority_groups>,
+                             and <Y> ranges from 0 to (<NPGP> -1) - for <NPGP> described in <priority_groups_row>.
+ is_active_str := "A" | "F"
+
+ E.g.
+ When a 'multipath' target is loaded, then IMA ASCII measurement log will have an entry
+ similar to the following, depicting what 'multipath' attributes are measured in EVENT_DATA
+ for 'dm_table_load' event.
+ (converted from ASCII to text for readability)
+
+ dm_version=4.45.0;
+ name=mp,uuid=,major=253,minor=0,minor_count=1,num_targets=1;
+ target_index=0,target_begin=0,target_len=2097152,target_name=multipath,target_version=1.14.0,nr_priority_groups=2,
+    pg_state_0=E,nr_pgpaths_0=2,path_selector_name_0=queue-length,
+        path_name_0_0=8:16,is_active_0_0=A,fail_count_0_0=0,path_selector_status_0_0=,
+        path_name_0_1=8:32,is_active_0_1=A,fail_count_0_1=0,path_selector_status_0_1=,
+    pg_state_1=E,nr_pgpaths_1=2,path_selector_name_1=queue-length,
+        path_name_1_0=8:48,is_active_1_0=A,fail_count_1_0=0,path_selector_status_1_0=,
+        path_name_1_1=8:64,is_active_1_1=A,fail_count_1_1=0,path_selector_status_1_1=;
+
+7. raid
+--------
+The 'target_attributes' (described as part of EVENT_DATA in 'Table load'
+section above) has the following data format for 'raid' target.
+
+::
+
+ target_attributes := <target_name> "," <target_version> "," <raid_type> "," <raid_disks> "," <raid_state>
+                      <raid_device_status> ["," journal_dev_mode] ";"
+
+ target_name := "target_name=raid"
+ target_version := "target_version=" <N> "." <N> "." <N>
+ raid_type := "raid_type=" <raid_type_str>
+ raid_disks := "raid_disks=" <NRD>
+ raid_state := "raid_state=" <raid_state_str>
+ raid_state_str := "frozen" | "reshape" |"resync" | "check" | "repair" | "recover" | "idle" |"undef"
+ raid_device_status := <raid_device_status_row> | <raid_device_status_row><raid_device_status>
+                       <raid_device_status_row> is repeated <NRD> times - for <NRD> described in <raid_disks>.
+ raid_device_status_row := "raid_device_" <X> "_status=" <raid_device_status_str>
+                           where <X> ranges from 0 to (<NRD> -1) - for <NRD> described in <raid_disks>.
+ raid_device_status_str := "A" | "D" | "a" | "-"
+ journal_dev_mode := "journal_dev_mode=" <journal_dev_mode_str>
+ journal_dev_mode_str := "writethrough" | "writeback" | "invalid"
+
+ E.g.
+ When a 'raid' target is loaded, then IMA ASCII measurement log will have an entry
+ similar to the following, depicting what 'raid' attributes are measured in EVENT_DATA
+ for 'dm_table_load' event.
+ (converted from ASCII to text for readability)
+
+ dm_version=4.45.0;
+ name=raid_LV1,uuid=uuid_raid_LV1,major=253,minor=12,minor_count=1,num_targets=1;
+ target_index=0,target_begin=0,target_len=2048,target_name=raid,target_version=1.15.1,
+ raid_type=raid10,raid_disks=4,raid_state=idle,
+    raid_device_0_status=A,
+    raid_device_1_status=A,
+    raid_device_2_status=A,
+    raid_device_3_status=A;
+
+
+8. snapshot
+------------
+The 'target_attributes' (described as part of EVENT_DATA in 'Table load'
+section above) has the following data format for 'snapshot' target.
+
+::
+
+ target_attributes := <target_name> "," <target_version> "," <snap_origin_name> ","
+                      <snap_cow_name> "," <snap_valid> "," <snap_merge_failed> "," <snapshot_overflowed> ";"
+
+ target_name := "target_name=snapshot"
+ target_version := "target_version=" <N> "." <N> "." <N>
+ snap_origin_name := "snap_origin_name=" <string>
+ snap_cow_name := "snap_cow_name=" <string>
+ snap_valid := "snap_valid=" <yes_no>
+ snap_merge_failed := "snap_merge_failed=" <yes_no>
+ snapshot_overflowed := "snapshot_overflowed=" <yes_no>
+ yes_no := "y" | "n"
+
+ E.g.
+ When a 'snapshot' target is loaded, then IMA ASCII measurement log will have an entry
+ similar to the following, depicting what 'snapshot' attributes are measured in EVENT_DATA
+ for 'dm_table_load' event.
+ (converted from ASCII to text for readability)
+
+ dm_version=4.45.0;
+ name=snap1,uuid=snap_uuid1,major=253,minor=13,minor_count=1,num_targets=1;
+ target_index=0,target_begin=0,target_len=4096,target_name=snapshot,target_version=1.16.0,
+ snap_origin_name=253:11,snap_cow_name=253:12,snap_valid=y,snap_merge_failed=n,snapshot_overflowed=n;
+
+9. striped
 -----------
-When a linear target is loaded, then IMA ASCII measurement log will have an entry
-similar to the following, depicting what linear attributes are measured in EVENT_DATA.
-
-(converted from ASCII to text for readability)
-10 7bd94fa8f799169b9f12d97b9dbdce4dc5509233 ima-buf sha256:0d148eda69887f7833f1a6042767b54359cd23b64fa941b9e1856879eee1f778
-table_load
-name=test-raid0,uuid=,major=253,minor=8,minor_count=1,num_targets=1;
-target_index=0,target_begin=0,target_len=7812096,target_name=striped,target_version=1.6.0,stripes=4,chunk_size=128,
-stripe_0_device_name=253:1,stripe_0_physical_start=0,stripe_0_status=A,
-stripe_1_device_name=253:3,stripe_1_physical_start=0,stripe_1_status=A,
-stripe_2_device_name=253:5,stripe_2_physical_start=0,stripe_2_status=A,
-stripe_3_device_name=253:7,stripe_3_physical_start=0,stripe_3_status=A;
+The 'target_attributes' (described as part of EVENT_DATA in 'Table load'
+section above) has the following data format for 'striped' target.
+
+::
+
+ target_attributes := <target_name> "," <target_version> "," <stripes> "," <chunk_size> ","
+                      <stripe_data> ";"
+
+ target_name := "target_name=striped"
+ target_version := "target_version=" <N> "." <N> "." <N>
+ stripes := "stripes=" <NS>
+ chunk_size := "chunk_size=" <N>
+ stripe_data := <stripe_data_row>|<stripe_data><stripe_data_row>
+ stripe_data_row := <stripe_device_name> "," <stripe_physical_start> "," <stripe_status>
+ stripe_device_name := "stripe_" <X> "_device_name=" <stripe_device_name_str>
+                       where <X> ranges from 0 to (<NS> -1) - for <NS> described in <stripes>.
+ stripe_physical_start := "stripe_" <X> "_physical_start=" <N>
+                           where <X> ranges from 0 to (<NS> -1) - for <NS> described in <stripes>.
+ stripe_status := "stripe_" <X> "_status=" <stripe_status_str>
+                  where <X> ranges from 0 to (<NS> -1) - for <NS> described in <stripes>.
+ stripe_status_str := "D" | "A"
+
+ E.g.
+ When a 'striped' target is loaded, then IMA ASCII measurement log will have an entry
+ similar to the following, depicting what 'striped' attributes are measured in EVENT_DATA
+ for 'dm_table_load' event.
+ (converted from ASCII to text for readability)
+
+ dm_version=4.45.0;
+ name=striped1,uuid=striped_uuid1,major=253,minor=5,minor_count=1,num_targets=1;
+ target_index=0,target_begin=0,target_len=640,target_name=striped,target_version=1.6.0,stripes=2,chunk_size=64,
+    stripe_0_device_name=253:0,stripe_0_physical_start=2048,stripe_0_status=A,
+    stripe_1_device_name=253:3,stripe_1_physical_start=2048,stripe_1_status=A;
 
 10. verity
 ----------
-When a verity target is loaded, then IMA ASCII measurement log will have an entry
-similar to the following, depicting what verity attributes are measured in EVENT_DATA.
-
-(converted from ASCII to text for readability)
-10 fced5f575b140fc0efac302c88a635174cd663da ima-buf sha256:021370c1cc93929460b06922c606334fb1d7ea5ecf04f2384f3157a446894283
-table_load
-name=test-verity,uuid=,major=253,minor=2,minor_count=1,num_targets=1;
-target_index=0,target_begin=0,target_len=1953120,target_name=verity,target_version=1.8.0,hash_failed=V,
-verity_version=1,data_device_name=253:1,hash_device_name=253:0,verity_algorithm=sha256,
-root_digest=29cb87e60ce7b12b443ba6008266f3e41e93e403d7f298f8e3f316b29ff89c5e,
-salt=e48da609055204e89ae53b655ca2216dd983cf3cb829f34f63a297d106d53e2d,
-ignore_zero_blocks=n,check_at_most_once=n;
+The 'target_attributes' (described as part of EVENT_DATA in 'Table load'
+section above) has the following data format for 'verity' target.
+
+::
+
+ target_attributes := <target_name> "," <target_version> "," <hash_failed> "," <verity_version> ","
+                      <data_device_name> "," <hash_device_name> "," <verity_algorithm> "," <root_digest> ","
+                      <salt> "," <ignore_zero_blocks> "," <check_at_most_once> ["," <root_hash_sig_key_desc>]
+                      ["," <verity_mode>] ";"
+
+ target_name := "target_name=verity"
+ target_version := "target_version=" <N> "." <N> "." <N>
+ hash_failed := "hash_failed=" <hash_failed_str>
+ hash_failed_str := "C" | "V"
+ verity_version := "verity_version=" <verity_version_str>
+ data_device_name := "data_device_name=" <data_device_name_str>
+ hash_device_name := "hash_device_name=" <hash_device_name_str>
+ verity_algorithm := "verity_algorithm=" <verity_algorithm_str>
+ root_digest := "root_digest=" <root_digest_str>
+ salt := "salt=" <salt_str>
+ salt_str := "-" <verity_salt_str>
+ ignore_zero_blocks := "ignore_zero_blocks=" <yes_no>
+ check_at_most_once := "check_at_most_once=" <yes_no>
+ root_hash_sig_key_desc := "root_hash_sig_key_desc="
+ verity_mode := "verity_mode=" <verity_mode_str>
+ verity_mode_str := "ignore_corruption" | "restart_on_corruption" | "panic_on_corruption" | "invalid"
+ yes_no := "y" | "n"
+
+ E.g.
+ When a 'verity' target is loaded, then IMA ASCII measurement log will have an entry
+ similar to the following, depicting what 'verity' attributes are measured in EVENT_DATA
+ for 'dm_table_load' event.
+ (converted from ASCII to text for readability)
+
+ dm_version=4.45.0;
+ name=test-verity,uuid=,major=253,minor=2,minor_count=1,num_targets=1;
+ target_index=0,target_begin=0,target_len=1953120,target_name=verity,target_version=1.8.0,hash_failed=V,
+ verity_version=1,data_device_name=253:1,hash_device_name=253:0,verity_algorithm=sha256,
+ root_digest=29cb87e60ce7b12b443ba6008266f3e41e93e403d7f298f8e3f316b29ff89c5e,
+ salt=e48da609055204e89ae53b655ca2216dd983cf3cb829f34f63a297d106d53e2d,
+ ignore_zero_blocks=n,check_at_most_once=n;
-- 
2.32.0


--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [PATCH 0/6] updates to device mapper target measurement using ima

[Mike Snitzer]

On Fri, Aug 13 2021 at  5:37P -0400,
Tushar Sugandhi <tusharsu@linux.microsoft.com> wrote:

> 
> There were several improvements suggested for the original device mapper
> target measurement patch series [1].
> 
> Those improvement suggestions include: 
>  - Prefixing hashes for the DM tables being measured in ima log with the
>    hash algorithm.
>  - Adding version information for DM related events being measured in the
>    ima log.
>  - Prefixing DM related event names with "dm_".
>  - Including the verity target attribute - "root_hash_sig_key_desc"
>    in the ima measurement log.
> 
> This series incorporates the above suggestions.
> 
> This series also has the following fixes:
>  - Adding a one-time warning to dmesg during dm_init if
>    CONFIG_IMA_DISABLE_HTABLE is set to 'n'.
>  - Updating 'integrity' target to remove the duplicate measurement of
>    the attribute "mode=%c".
>  - Indexing various attributes in 'multipath' target, and adding
>    "nr_priority_groups=%u" attribute to the measurements.
>  - Fixing 'make htmldocs' warnings in dm-ima.rst.
>  - Adding missing documentation for the targets - 'cache', 'integrity',
>    'multipath', and 'snapshot' in dm-ima.rst.
>  - Updating dm-ima.rst documentation with the grammar for various DM
>    events and targets in Backus Naur form.
>  - Updating dm-ima.rst documentation to be consistent with the code
>    changes described above.
> 
> This series is based on top of the following git repo/branch/commit:
>  Repo: https://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm.git
>  Branch: dm-5.15
>  Commit: commit 5a2a33884f0b ("dm crypt: Avoid percpu_counter spinlock contention in crypt_page_alloc()")
> 
> 
> [1] https://patchwork.kernel.org/project/dm-devel/cover/20210713004904.8808-1-tusharsu@linux.microsoft.com/
> 
> Tushar Sugandhi (6):
>   dm ima: prefix dm table hashes in ima log with hash algorithm
>   dm ima: add version info to dm related events in ima log
>   dm ima: prefix ima event name related to device mapper with dm_
>   dm ima: add a warning in dm_init if duplicate ima events are not
>     measured
>   dm ima: update dm target attributes for ima measurements
>   dm ima: update dm documentation for ima measurement support

Hi,

I reviewed and staged these changes in dm-5.15 (and for-next) with
minimal tweaks. Really just some whitespace and a simplification of
the conditional for the warning in dm_init().

Please make sure that you manually apply Christoph's fix for the issue
you reported earlier in the week, you were cc'd on the ultimate fix
which has a different patch header than this patch but on a code level
it is identical (and only patch that landed on a public mailing list
due to typo in linux-block email address when hch sent the final fix):
https://listman.redhat.com/archives/dm-devel/2021-August/msg00154.html

It is an issue that'll linger in the dm-5.15 because I cannot rebase
at this late hour even once Jens picks the fix up into the
linux-block tree.

Thanks,
Mike

Re: [dm-devel] [PATCH 0/6] updates to device mapper target measurement using ima

[Mike Snitzer]

On Fri, Aug 13 2021 at  5:37P -0400,
Tushar Sugandhi <tusharsu@linux.microsoft.com> wrote:

> 
> There were several improvements suggested for the original device mapper
> target measurement patch series [1].
> 
> Those improvement suggestions include: 
>  - Prefixing hashes for the DM tables being measured in ima log with the
>    hash algorithm.
>  - Adding version information for DM related events being measured in the
>    ima log.
>  - Prefixing DM related event names with "dm_".
>  - Including the verity target attribute - "root_hash_sig_key_desc"
>    in the ima measurement log.
> 
> This series incorporates the above suggestions.
> 
> This series also has the following fixes:
>  - Adding a one-time warning to dmesg during dm_init if
>    CONFIG_IMA_DISABLE_HTABLE is set to 'n'.
>  - Updating 'integrity' target to remove the duplicate measurement of
>    the attribute "mode=%c".
>  - Indexing various attributes in 'multipath' target, and adding
>    "nr_priority_groups=%u" attribute to the measurements.
>  - Fixing 'make htmldocs' warnings in dm-ima.rst.
>  - Adding missing documentation for the targets - 'cache', 'integrity',
>    'multipath', and 'snapshot' in dm-ima.rst.
>  - Updating dm-ima.rst documentation with the grammar for various DM
>    events and targets in Backus Naur form.
>  - Updating dm-ima.rst documentation to be consistent with the code
>    changes described above.
> 
> This series is based on top of the following git repo/branch/commit:
>  Repo: https://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm.git
>  Branch: dm-5.15
>  Commit: commit 5a2a33884f0b ("dm crypt: Avoid percpu_counter spinlock contention in crypt_page_alloc()")
> 
> 
> [1] https://patchwork.kernel.org/project/dm-devel/cover/20210713004904.8808-1-tusharsu@linux.microsoft.com/
> 
> Tushar Sugandhi (6):
>   dm ima: prefix dm table hashes in ima log with hash algorithm
>   dm ima: add version info to dm related events in ima log
>   dm ima: prefix ima event name related to device mapper with dm_
>   dm ima: add a warning in dm_init if duplicate ima events are not
>     measured
>   dm ima: update dm target attributes for ima measurements
>   dm ima: update dm documentation for ima measurement support

Hi,

I reviewed and staged these changes in dm-5.15 (and for-next) with
minimal tweaks. Really just some whitespace and a simplification of
the conditional for the warning in dm_init().

Please make sure that you manually apply Christoph's fix for the issue
you reported earlier in the week, you were cc'd on the ultimate fix
which has a different patch header than this patch but on a code level
it is identical (and only patch that landed on a public mailing list
due to typo in linux-block email address when hch sent the final fix):
https://listman.redhat.com/archives/dm-devel/2021-August/msg00154.html

It is an issue that'll linger in the dm-5.15 because I cannot rebase
at this late hour even once Jens picks the fix up into the
linux-block tree.

Thanks,
Mike

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [PATCH 0/6] updates to device mapper target measurement using ima

[Tushar Sugandhi]

Hello Mike,

On 8/20/21 1:19 PM, Mike Snitzer wrote:
> On Fri, Aug 13 2021 at  5:37P -0400,
> Tushar Sugandhi <tusharsu@linux.microsoft.com> wrote:
> 
>>
>> There were several improvements suggested for the original device mapper
>> target measurement patch series [1].
>>
>> Those improvement suggestions include:
>>   - Prefixing hashes for the DM tables being measured in ima log with the
>>     hash algorithm.
>>   - Adding version information for DM related events being measured in the
>>     ima log.
>>   - Prefixing DM related event names with "dm_".
>>   - Including the verity target attribute - "root_hash_sig_key_desc"
>>     in the ima measurement log.
>>
>> This series incorporates the above suggestions.
>>
>> This series also has the following fixes:
>>   - Adding a one-time warning to dmesg during dm_init if
>>     CONFIG_IMA_DISABLE_HTABLE is set to 'n'.
>>   - Updating 'integrity' target to remove the duplicate measurement of
>>     the attribute "mode=%c".
>>   - Indexing various attributes in 'multipath' target, and adding
>>     "nr_priority_groups=%u" attribute to the measurements.
>>   - Fixing 'make htmldocs' warnings in dm-ima.rst.
>>   - Adding missing documentation for the targets - 'cache', 'integrity',
>>     'multipath', and 'snapshot' in dm-ima.rst.
>>   - Updating dm-ima.rst documentation with the grammar for various DM
>>     events and targets in Backus Naur form.
>>   - Updating dm-ima.rst documentation to be consistent with the code
>>     changes described above.
>>
>> This series is based on top of the following git repo/branch/commit:
>>   Repo: https://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm.git
>>   Branch: dm-5.15
>>   Commit: commit 5a2a33884f0b ("dm crypt: Avoid percpu_counter spinlock contention in crypt_page_alloc()")
>>
>>
>> [1] https://patchwork.kernel.org/project/dm-devel/cover/20210713004904.8808-1-tusharsu@linux.microsoft.com/
>>
>> Tushar Sugandhi (6):
>>    dm ima: prefix dm table hashes in ima log with hash algorithm
>>    dm ima: add version info to dm related events in ima log
>>    dm ima: prefix ima event name related to device mapper with dm_
>>    dm ima: add a warning in dm_init if duplicate ima events are not
>>      measured
>>    dm ima: update dm target attributes for ima measurements
>>    dm ima: update dm documentation for ima measurement support
> 
> Hi,
> 
> I reviewed and staged these changes in dm-5.15 (and for-next) with
> minimal tweaks. Really just some whitespace and a simplification of
> the conditional for the warning in dm_init().
> 
> Please make sure that you manually apply Christoph's fix for the issue
> you reported earlier in the week, you were cc'd on the ultimate fix
> which has a different patch header than this patch but on a code level
> it is identical (and only patch that landed on a public mailing list
> due to typo in linux-block email address when hch sent the final fix):
> https://listman.redhat.com/archives/dm-devel/2021-August/msg00154.html
> 
> It is an issue that'll linger in the dm-5.15 because I cannot rebase
> at this late hour even once Jens picks the fix up into the
> linux-block tree.
> 
Thank you. I will apply Christoph's fix at my end and test the scenario 
again.

Thanks,
Tushar
> Thanks,
> Mike
> 

Re: [dm-devel] [PATCH 0/6] updates to device mapper target measurement using ima

[Tushar Sugandhi]

Hello Mike,

On 8/20/21 1:19 PM, Mike Snitzer wrote:
> On Fri, Aug 13 2021 at  5:37P -0400,
> Tushar Sugandhi <tusharsu@linux.microsoft.com> wrote:
> 
>>
>> There were several improvements suggested for the original device mapper
>> target measurement patch series [1].
>>
>> Those improvement suggestions include:
>>   - Prefixing hashes for the DM tables being measured in ima log with the
>>     hash algorithm.
>>   - Adding version information for DM related events being measured in the
>>     ima log.
>>   - Prefixing DM related event names with "dm_".
>>   - Including the verity target attribute - "root_hash_sig_key_desc"
>>     in the ima measurement log.
>>
>> This series incorporates the above suggestions.
>>
>> This series also has the following fixes:
>>   - Adding a one-time warning to dmesg during dm_init if
>>     CONFIG_IMA_DISABLE_HTABLE is set to 'n'.
>>   - Updating 'integrity' target to remove the duplicate measurement of
>>     the attribute "mode=%c".
>>   - Indexing various attributes in 'multipath' target, and adding
>>     "nr_priority_groups=%u" attribute to the measurements.
>>   - Fixing 'make htmldocs' warnings in dm-ima.rst.
>>   - Adding missing documentation for the targets - 'cache', 'integrity',
>>     'multipath', and 'snapshot' in dm-ima.rst.
>>   - Updating dm-ima.rst documentation with the grammar for various DM
>>     events and targets in Backus Naur form.
>>   - Updating dm-ima.rst documentation to be consistent with the code
>>     changes described above.
>>
>> This series is based on top of the following git repo/branch/commit:
>>   Repo: https://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm.git
>>   Branch: dm-5.15
>>   Commit: commit 5a2a33884f0b ("dm crypt: Avoid percpu_counter spinlock contention in crypt_page_alloc()")
>>
>>
>> [1] https://patchwork.kernel.org/project/dm-devel/cover/20210713004904.8808-1-tusharsu@linux.microsoft.com/
>>
>> Tushar Sugandhi (6):
>>    dm ima: prefix dm table hashes in ima log with hash algorithm
>>    dm ima: add version info to dm related events in ima log
>>    dm ima: prefix ima event name related to device mapper with dm_
>>    dm ima: add a warning in dm_init if duplicate ima events are not
>>      measured
>>    dm ima: update dm target attributes for ima measurements
>>    dm ima: update dm documentation for ima measurement support
> 
> Hi,
> 
> I reviewed and staged these changes in dm-5.15 (and for-next) with
> minimal tweaks. Really just some whitespace and a simplification of
> the conditional for the warning in dm_init().
> 
> Please make sure that you manually apply Christoph's fix for the issue
> you reported earlier in the week, you were cc'd on the ultimate fix
> which has a different patch header than this patch but on a code level
> it is identical (and only patch that landed on a public mailing list
> due to typo in linux-block email address when hch sent the final fix):
> https://listman.redhat.com/archives/dm-devel/2021-August/msg00154.html
> 
> It is an issue that'll linger in the dm-5.15 because I cannot rebase
> at this late hour even once Jens picks the fix up into the
> linux-block tree.
> 
Thank you. I will apply Christoph's fix at my end and test the scenario 
again.

Thanks,
Tushar
> Thanks,
> Mike
> 

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel