From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> To: Andy Gross <agross@kernel.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, Ulf Hansson <ulf.hansson@linaro.org>, Marcel Holtmann <marcel@holtmann.org>, Johan Hedberg <johan.hedberg@gmail.com>, Luiz Augusto von Dentz <luiz.dentz@gmail.com>, Kalle Valo <kvalo@codeaurora.org>, "David S. Miller" <davem@davemloft.net>, Jakub Kicinski <kuba@kernel.org>, Stanimir Varbanov <svarbanov@mm-sol.com> Cc: linux-arm-msm@vger.kernel.org, linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org, ath10k@lists.infradead.org, linux-wireless@vger.kernel.org, netdev@vger.kernel.org Subject: [RFC PATCH 04/15] ath10k: add support for pwrseq sequencing Date: Tue, 17 Aug 2021 03:54:56 +0300 [thread overview] Message-ID: <20210817005507.1507580-5-dmitry.baryshkov@linaro.org> (raw) In-Reply-To: <20210817005507.1507580-1-dmitry.baryshkov@linaro.org> Power sequencing for Qualcomm WiFi+BT chipsets are being reworked to use pwrseq rather than individually handling all the regulators. Add support for pwrseq to ath10k SNOC driver. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/net/wireless/ath/ath10k/snoc.c | 63 ++++++++++++++++++++------ drivers/net/wireless/ath/ath10k/snoc.h | 2 + 2 files changed, 52 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c index ea00fbb15601..870ed28d01a6 100644 --- a/drivers/net/wireless/ath/ath10k/snoc.c +++ b/drivers/net/wireless/ath/ath10k/snoc.c @@ -14,6 +14,7 @@ #include <linux/regulator/consumer.h> #include <linux/of_address.h> #include <linux/iommu.h> +#include <linux/pwrseq/consumer.h> #include "ce.h" #include "coredump.h" @@ -42,7 +43,6 @@ static char *const ce_name[] = { }; static const char * const ath10k_regulators[] = { - "vdd-0.8-cx-mx", "vdd-1.8-xo", "vdd-1.3-rfa", "vdd-3.3-ch0", @@ -1010,10 +1010,17 @@ static int ath10k_hw_power_on(struct ath10k *ar) ath10k_dbg(ar, ATH10K_DBG_SNOC, "soc power on\n"); - ret = regulator_bulk_enable(ar_snoc->num_vregs, ar_snoc->vregs); + if (ar_snoc->pwrseq) + ret = pwrseq_full_power_on(ar_snoc->pwrseq); + else + ret = regulator_bulk_enable(ar_snoc->num_vregs, ar_snoc->vregs); if (ret) return ret; + ret = regulator_enable(ar_snoc->vreg_cx_mx); + if (ret) + goto vreg_bulk_off; + ret = clk_bulk_prepare_enable(ar_snoc->num_clks, ar_snoc->clks); if (ret) goto vreg_off; @@ -1021,7 +1028,13 @@ static int ath10k_hw_power_on(struct ath10k *ar) return ret; vreg_off: - regulator_bulk_disable(ar_snoc->num_vregs, ar_snoc->vregs); + regulator_disable(ar_snoc->vreg_cx_mx); +vreg_bulk_off: + if (ar_snoc->pwrseq) + pwrseq_power_off(ar_snoc->pwrseq); + else + regulator_bulk_disable(ar_snoc->num_vregs, ar_snoc->vregs); + return ret; } @@ -1033,6 +1046,14 @@ static int ath10k_hw_power_off(struct ath10k *ar) clk_bulk_disable_unprepare(ar_snoc->num_clks, ar_snoc->clks); + regulator_disable(ar_snoc->vreg_cx_mx); + + if (ar_snoc->pwrseq) { + pwrseq_power_off(ar_snoc->pwrseq); + + return 0; + } + return regulator_bulk_disable(ar_snoc->num_vregs, ar_snoc->vregs); } @@ -1691,20 +1712,36 @@ static int ath10k_snoc_probe(struct platform_device *pdev) goto err_release_resource; } - ar_snoc->num_vregs = ARRAY_SIZE(ath10k_regulators); - ar_snoc->vregs = devm_kcalloc(&pdev->dev, ar_snoc->num_vregs, - sizeof(*ar_snoc->vregs), GFP_KERNEL); - if (!ar_snoc->vregs) { - ret = -ENOMEM; + ar_snoc->pwrseq = devm_pwrseq_get_optional(&pdev->dev, "wifi"); + if (IS_ERR(ar_snoc->pwrseq)) { + ret = PTR_ERR(ar_snoc->pwrseq); + if (ret != -EPROBE_DEFER) + ath10k_warn(ar, "failed to acquire pwrseq: %d\n", ret); goto err_free_irq; } - for (i = 0; i < ar_snoc->num_vregs; i++) - ar_snoc->vregs[i].supply = ath10k_regulators[i]; - ret = devm_regulator_bulk_get(&pdev->dev, ar_snoc->num_vregs, - ar_snoc->vregs); - if (ret < 0) + if (!ar_snoc->pwrseq) { + ar_snoc->num_vregs = ARRAY_SIZE(ath10k_regulators); + ar_snoc->vregs = devm_kcalloc(&pdev->dev, ar_snoc->num_vregs, + sizeof(*ar_snoc->vregs), GFP_KERNEL); + if (!ar_snoc->vregs) { + ret = -ENOMEM; + goto err_free_irq; + } + for (i = 0; i < ar_snoc->num_vregs; i++) + ar_snoc->vregs[i].supply = ath10k_regulators[i]; + + ret = devm_regulator_bulk_get(&pdev->dev, ar_snoc->num_vregs, + ar_snoc->vregs); + if (ret < 0) + goto err_free_irq; + } + + ar_snoc->vreg_cx_mx = devm_regulator_get(&pdev->dev, "vdd-0.8-cx-mx"); + if (IS_ERR(ar_snoc->vreg_cx_mx)) { + ret = PTR_ERR(ar_snoc->vreg_cx_mx); goto err_free_irq; + } ar_snoc->num_clks = ARRAY_SIZE(ath10k_clocks); ar_snoc->clks = devm_kcalloc(&pdev->dev, ar_snoc->num_clks, diff --git a/drivers/net/wireless/ath/ath10k/snoc.h b/drivers/net/wireless/ath/ath10k/snoc.h index 5095d1893681..16cfd72180cd 100644 --- a/drivers/net/wireless/ath/ath10k/snoc.h +++ b/drivers/net/wireless/ath/ath10k/snoc.h @@ -72,8 +72,10 @@ struct ath10k_snoc { struct timer_list rx_post_retry; struct regulator_bulk_data *vregs; size_t num_vregs; + struct regulator *vreg_cx_mx; struct clk_bulk_data *clks; size_t num_clks; + struct pwrseq *pwrseq; struct ath10k_qmi *qmi; unsigned long flags; bool xo_cal_supported; -- 2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> To: Andy Gross <agross@kernel.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, Ulf Hansson <ulf.hansson@linaro.org>, Marcel Holtmann <marcel@holtmann.org>, Johan Hedberg <johan.hedberg@gmail.com>, Luiz Augusto von Dentz <luiz.dentz@gmail.com>, Kalle Valo <kvalo@codeaurora.org>, "David S. Miller" <davem@davemloft.net>, Jakub Kicinski <kuba@kernel.org>, Stanimir Varbanov <svarbanov@mm-sol.com> Cc: linux-arm-msm@vger.kernel.org, linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org, ath10k@lists.infradead.org, linux-wireless@vger.kernel.org, netdev@vger.kernel.org Subject: [RFC PATCH 04/15] ath10k: add support for pwrseq sequencing Date: Tue, 17 Aug 2021 03:54:56 +0300 [thread overview] Message-ID: <20210817005507.1507580-5-dmitry.baryshkov@linaro.org> (raw) In-Reply-To: <20210817005507.1507580-1-dmitry.baryshkov@linaro.org> Power sequencing for Qualcomm WiFi+BT chipsets are being reworked to use pwrseq rather than individually handling all the regulators. Add support for pwrseq to ath10k SNOC driver. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/net/wireless/ath/ath10k/snoc.c | 63 ++++++++++++++++++++------ drivers/net/wireless/ath/ath10k/snoc.h | 2 + 2 files changed, 52 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c index ea00fbb15601..870ed28d01a6 100644 --- a/drivers/net/wireless/ath/ath10k/snoc.c +++ b/drivers/net/wireless/ath/ath10k/snoc.c @@ -14,6 +14,7 @@ #include <linux/regulator/consumer.h> #include <linux/of_address.h> #include <linux/iommu.h> +#include <linux/pwrseq/consumer.h> #include "ce.h" #include "coredump.h" @@ -42,7 +43,6 @@ static char *const ce_name[] = { }; static const char * const ath10k_regulators[] = { - "vdd-0.8-cx-mx", "vdd-1.8-xo", "vdd-1.3-rfa", "vdd-3.3-ch0", @@ -1010,10 +1010,17 @@ static int ath10k_hw_power_on(struct ath10k *ar) ath10k_dbg(ar, ATH10K_DBG_SNOC, "soc power on\n"); - ret = regulator_bulk_enable(ar_snoc->num_vregs, ar_snoc->vregs); + if (ar_snoc->pwrseq) + ret = pwrseq_full_power_on(ar_snoc->pwrseq); + else + ret = regulator_bulk_enable(ar_snoc->num_vregs, ar_snoc->vregs); if (ret) return ret; + ret = regulator_enable(ar_snoc->vreg_cx_mx); + if (ret) + goto vreg_bulk_off; + ret = clk_bulk_prepare_enable(ar_snoc->num_clks, ar_snoc->clks); if (ret) goto vreg_off; @@ -1021,7 +1028,13 @@ static int ath10k_hw_power_on(struct ath10k *ar) return ret; vreg_off: - regulator_bulk_disable(ar_snoc->num_vregs, ar_snoc->vregs); + regulator_disable(ar_snoc->vreg_cx_mx); +vreg_bulk_off: + if (ar_snoc->pwrseq) + pwrseq_power_off(ar_snoc->pwrseq); + else + regulator_bulk_disable(ar_snoc->num_vregs, ar_snoc->vregs); + return ret; } @@ -1033,6 +1046,14 @@ static int ath10k_hw_power_off(struct ath10k *ar) clk_bulk_disable_unprepare(ar_snoc->num_clks, ar_snoc->clks); + regulator_disable(ar_snoc->vreg_cx_mx); + + if (ar_snoc->pwrseq) { + pwrseq_power_off(ar_snoc->pwrseq); + + return 0; + } + return regulator_bulk_disable(ar_snoc->num_vregs, ar_snoc->vregs); } @@ -1691,20 +1712,36 @@ static int ath10k_snoc_probe(struct platform_device *pdev) goto err_release_resource; } - ar_snoc->num_vregs = ARRAY_SIZE(ath10k_regulators); - ar_snoc->vregs = devm_kcalloc(&pdev->dev, ar_snoc->num_vregs, - sizeof(*ar_snoc->vregs), GFP_KERNEL); - if (!ar_snoc->vregs) { - ret = -ENOMEM; + ar_snoc->pwrseq = devm_pwrseq_get_optional(&pdev->dev, "wifi"); + if (IS_ERR(ar_snoc->pwrseq)) { + ret = PTR_ERR(ar_snoc->pwrseq); + if (ret != -EPROBE_DEFER) + ath10k_warn(ar, "failed to acquire pwrseq: %d\n", ret); goto err_free_irq; } - for (i = 0; i < ar_snoc->num_vregs; i++) - ar_snoc->vregs[i].supply = ath10k_regulators[i]; - ret = devm_regulator_bulk_get(&pdev->dev, ar_snoc->num_vregs, - ar_snoc->vregs); - if (ret < 0) + if (!ar_snoc->pwrseq) { + ar_snoc->num_vregs = ARRAY_SIZE(ath10k_regulators); + ar_snoc->vregs = devm_kcalloc(&pdev->dev, ar_snoc->num_vregs, + sizeof(*ar_snoc->vregs), GFP_KERNEL); + if (!ar_snoc->vregs) { + ret = -ENOMEM; + goto err_free_irq; + } + for (i = 0; i < ar_snoc->num_vregs; i++) + ar_snoc->vregs[i].supply = ath10k_regulators[i]; + + ret = devm_regulator_bulk_get(&pdev->dev, ar_snoc->num_vregs, + ar_snoc->vregs); + if (ret < 0) + goto err_free_irq; + } + + ar_snoc->vreg_cx_mx = devm_regulator_get(&pdev->dev, "vdd-0.8-cx-mx"); + if (IS_ERR(ar_snoc->vreg_cx_mx)) { + ret = PTR_ERR(ar_snoc->vreg_cx_mx); goto err_free_irq; + } ar_snoc->num_clks = ARRAY_SIZE(ath10k_clocks); ar_snoc->clks = devm_kcalloc(&pdev->dev, ar_snoc->num_clks, diff --git a/drivers/net/wireless/ath/ath10k/snoc.h b/drivers/net/wireless/ath/ath10k/snoc.h index 5095d1893681..16cfd72180cd 100644 --- a/drivers/net/wireless/ath/ath10k/snoc.h +++ b/drivers/net/wireless/ath/ath10k/snoc.h @@ -72,8 +72,10 @@ struct ath10k_snoc { struct timer_list rx_post_retry; struct regulator_bulk_data *vregs; size_t num_vregs; + struct regulator *vreg_cx_mx; struct clk_bulk_data *clks; size_t num_clks; + struct pwrseq *pwrseq; struct ath10k_qmi *qmi; unsigned long flags; bool xo_cal_supported; -- 2.30.2 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2021-08-17 0:56 UTC|newest] Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-08-17 0:54 [RFC PATCH 00/15] create power sequencing subsystem Dmitry Baryshkov 2021-08-17 0:54 ` Dmitry Baryshkov 2021-08-17 0:54 ` [RFC PATCH 01/15] power: add power sequencer subsystem Dmitry Baryshkov 2021-08-17 0:54 ` Dmitry Baryshkov 2021-08-19 23:37 ` Bjorn Andersson 2021-08-19 23:37 ` Bjorn Andersson 2021-08-17 0:54 ` [RFC PATCH 02/15] pwrseq: port MMC's pwrseq drivers to new pwrseq subsystem Dmitry Baryshkov 2021-08-17 0:54 ` Dmitry Baryshkov 2021-08-17 0:54 ` [RFC PATCH 03/15] mmc: core: switch " Dmitry Baryshkov 2021-08-17 0:54 ` Dmitry Baryshkov 2021-08-17 0:54 ` Dmitry Baryshkov [this message] 2021-08-17 0:54 ` [RFC PATCH 04/15] ath10k: add support for pwrseq sequencing Dmitry Baryshkov 2021-08-17 0:54 ` [RFC PATCH 05/15] Bluetooth: hci_qca: merge qca_power into qca_serdev Dmitry Baryshkov 2021-08-17 0:54 ` Dmitry Baryshkov 2021-08-17 0:54 ` [RFC PATCH 06/15] Bluetooth: hci_qca: merge init paths Dmitry Baryshkov 2021-08-17 0:54 ` Dmitry Baryshkov 2021-08-17 0:54 ` [RFC PATCH 07/15] Bluetooth: hci_qca: merge qca_power_on with qca_regulators_init Dmitry Baryshkov 2021-08-17 0:54 ` Dmitry Baryshkov 2021-08-17 0:55 ` [RFC PATCH 08/15] Bluetooth: hci_qca: futher rework of power on/off handling Dmitry Baryshkov 2021-08-17 0:55 ` Dmitry Baryshkov 2021-08-17 0:55 ` [RFC PATCH 09/15] Bluetooth: hci_qca: add support for pwrseq Dmitry Baryshkov 2021-08-17 0:55 ` Dmitry Baryshkov 2021-08-17 0:55 ` [RFC PATCH 10/15] pwrseq: add support for QCA BT+WiFi power sequencer Dmitry Baryshkov 2021-08-17 0:55 ` Dmitry Baryshkov 2021-08-17 22:41 ` kernel test robot 2021-08-19 23:18 ` Bjorn Andersson 2021-08-19 23:18 ` Bjorn Andersson 2021-08-20 8:10 ` Dmitry Baryshkov 2021-08-20 8:10 ` Dmitry Baryshkov 2021-08-20 16:35 ` Bjorn Andersson 2021-08-20 16:35 ` Bjorn Andersson 2021-08-17 0:55 ` [RFC PATCH 11/15] arm64: dts: qcom: sdm845-db845c: switch bt+wifi to qca " Dmitry Baryshkov 2021-08-17 0:55 ` Dmitry Baryshkov 2021-08-19 23:40 ` Bjorn Andersson 2021-08-19 23:40 ` Bjorn Andersson 2021-08-17 0:55 ` [RFC PATCH 12/15] arm64: dts: qcom: qrb5165-rb5: add bluetooth support Dmitry Baryshkov 2021-08-17 0:55 ` Dmitry Baryshkov 2021-08-17 0:55 ` [RFC PATCH 13/15] arm64: dts: qcom: sdm845-db845c: add second channel support to qca power sequencer Dmitry Baryshkov 2021-08-17 0:55 ` Dmitry Baryshkov 2021-08-17 0:55 ` [RFC PATCH 14/15] WIP: PCI: qcom: use pwrseq to power up bus devices Dmitry Baryshkov 2021-08-17 0:55 ` Dmitry Baryshkov 2021-08-19 23:44 ` Bjorn Andersson 2021-08-19 23:44 ` Bjorn Andersson 2021-08-20 8:50 ` Dmitry Baryshkov 2021-08-20 8:50 ` Dmitry Baryshkov 2021-08-17 0:55 ` [RFC PATCH 15/15] WIP: arm64: dts: qcom: qrb5165-rb5: add bus-pwrseq property to pcie0 Dmitry Baryshkov 2021-08-17 0:55 ` Dmitry Baryshkov 2021-08-19 15:23 ` [RFC PATCH 00/15] create power sequencing subsystem Marcel Holtmann 2021-08-19 15:23 ` Marcel Holtmann 2021-08-20 13:08 ` Dmitry Baryshkov 2021-08-20 13:08 ` Dmitry Baryshkov 2021-08-20 17:02 ` Bjorn Andersson 2021-08-20 17:02 ` Bjorn Andersson 2021-08-20 18:06 ` Dmitry Baryshkov 2021-08-20 18:06 ` Dmitry Baryshkov 2021-08-21 6:50 ` Marcel Holtmann 2021-08-21 6:50 ` Marcel Holtmann
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210817005507.1507580-5-dmitry.baryshkov@linaro.org \ --to=dmitry.baryshkov@linaro.org \ --cc=agross@kernel.org \ --cc=ath10k@lists.infradead.org \ --cc=bjorn.andersson@linaro.org \ --cc=davem@davemloft.net \ --cc=johan.hedberg@gmail.com \ --cc=kuba@kernel.org \ --cc=kvalo@codeaurora.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-bluetooth@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linux-wireless@vger.kernel.org \ --cc=luiz.dentz@gmail.com \ --cc=marcel@holtmann.org \ --cc=netdev@vger.kernel.org \ --cc=svarbanov@mm-sol.com \ --cc=ulf.hansson@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.