From: Roger Quadros <rogerq@kernel.org> To: ssantosh@kernel.org Cc: nm@ti.com, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Roger Quadros <rogerq@kernel.org>, Grygorii Strashko <grygorii.strashko@ti.com> Subject: [PATCH 1/2] ARM: dts: keystone-k2*-evm: Fix mdio node status to "okay" Date: Fri, 20 Aug 2021 12:53:40 +0300 [thread overview] Message-ID: <20210820095341.5619-2-rogerq@kernel.org> (raw) In-Reply-To: <20210820095341.5619-1-rogerq@kernel.org> As per Device Tree core schema [1], status parameter of nodes can be either "okay" or "disabled". U-boot Driver Model does not recognize status="ok" either and treats the node as disabled. [1] https://github.com/devicetree-org/dt-schema/blob/master/schemas/dt-core.yaml#L36 Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Roger Quadros <rogerq@kernel.org> --- arch/arm/boot/dts/keystone-k2e-evm.dts | 2 +- arch/arm/boot/dts/keystone-k2hk-evm.dts | 2 +- arch/arm/boot/dts/keystone-k2l-evm.dts | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts index 66fec5f5d081..acac242ebdf7 100644 --- a/arch/arm/boot/dts/keystone-k2e-evm.dts +++ b/arch/arm/boot/dts/keystone-k2e-evm.dts @@ -159,7 +159,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts index ad4e22afe133..5e85f000acc3 100644 --- a/arch/arm/boot/dts/keystone-k2hk-evm.dts +++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts @@ -183,7 +183,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts index e200533d26a4..a6cbff4cfe20 100644 --- a/arch/arm/boot/dts/keystone-k2l-evm.dts +++ b/arch/arm/boot/dts/keystone-k2l-evm.dts @@ -132,7 +132,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; reg = <0>; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@kernel.org> To: ssantosh@kernel.org Cc: nm@ti.com, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Roger Quadros <rogerq@kernel.org>, Grygorii Strashko <grygorii.strashko@ti.com> Subject: [PATCH 1/2] ARM: dts: keystone-k2*-evm: Fix mdio node status to "okay" Date: Fri, 20 Aug 2021 12:53:40 +0300 [thread overview] Message-ID: <20210820095341.5619-2-rogerq@kernel.org> (raw) In-Reply-To: <20210820095341.5619-1-rogerq@kernel.org> As per Device Tree core schema [1], status parameter of nodes can be either "okay" or "disabled". U-boot Driver Model does not recognize status="ok" either and treats the node as disabled. [1] https://github.com/devicetree-org/dt-schema/blob/master/schemas/dt-core.yaml#L36 Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Roger Quadros <rogerq@kernel.org> --- arch/arm/boot/dts/keystone-k2e-evm.dts | 2 +- arch/arm/boot/dts/keystone-k2hk-evm.dts | 2 +- arch/arm/boot/dts/keystone-k2l-evm.dts | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts index 66fec5f5d081..acac242ebdf7 100644 --- a/arch/arm/boot/dts/keystone-k2e-evm.dts +++ b/arch/arm/boot/dts/keystone-k2e-evm.dts @@ -159,7 +159,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts index ad4e22afe133..5e85f000acc3 100644 --- a/arch/arm/boot/dts/keystone-k2hk-evm.dts +++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts @@ -183,7 +183,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts index e200533d26a4..a6cbff4cfe20 100644 --- a/arch/arm/boot/dts/keystone-k2l-evm.dts +++ b/arch/arm/boot/dts/keystone-k2l-evm.dts @@ -132,7 +132,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; reg = <0>; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-08-20 9:53 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-08-20 9:53 [PATCH 0/2] ARM: dts: keystone-k2*-evm: Fix mdio and dss node status Roger Quadros 2021-08-20 9:53 ` Roger Quadros 2021-08-20 9:53 ` Roger Quadros [this message] 2021-08-20 9:53 ` [PATCH 1/2] ARM: dts: keystone-k2*-evm: Fix mdio node status to "okay" Roger Quadros 2021-08-20 9:53 ` [PATCH 2/2] ARM: dts: keystone-k2g-evm: Fix dss " Roger Quadros 2021-08-20 9:53 ` Roger Quadros 2021-08-20 17:30 ` [PATCH 0/2] ARM: dts: keystone-k2*-evm: Fix mdio and dss node status Nishanth Menon 2021-08-20 17:30 ` Nishanth Menon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210820095341.5619-2-rogerq@kernel.org \ --to=rogerq@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=grygorii.strashko@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=ssantosh@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.