* [PATCH 0/2] docs: add definitions of terms for CI/testing @ 2021-08-20 21:09 Willian Rampazzo 2021-08-20 21:09 ` [PATCH 1/2] docs: split the CI docs into two files Willian Rampazzo 2021-08-20 21:09 ` [PATCH 2/2] docs: add definitions of terms for CI/testing Willian Rampazzo 0 siblings, 2 replies; 5+ messages in thread From: Willian Rampazzo @ 2021-08-20 21:09 UTC (permalink / raw) To: qemu-devel Cc: Thomas Huth, Daniel P . Berrangé, Philippe Mathieu-Daudé, Wainer dos Santos Moschetta, Cleber Rosa, Alex Bennée To understand the current state of QEMU CI/testing and have a base to discuss the plans for the future, it is important to define some usual terms. This patch defines the terms for "Automated tests", "Unit testing", "Functional testing", "System testing", "Flaky tests", "Gating", and "Continuous Integration". The first patch was borrowed from 20210812180403.4129067-1-berrange@redhat.com. Signed-off-by: Willian Rampazzo <willianr@redhat.com> Daniel P. Berrangé (1): docs: split the CI docs into two files Willian Rampazzo (1): docs: add definitions of terms for CI/testing docs/devel/ci-definitions.rst | 121 +++++++++++++++++++++++++ docs/devel/ci-jobs.rst | 40 +++++++++ docs/devel/ci-runners.rst | 117 +++++++++++++++++++++++++ docs/devel/ci.rst | 160 +--------------------------------- 4 files changed, 281 insertions(+), 157 deletions(-) create mode 100644 docs/devel/ci-definitions.rst create mode 100644 docs/devel/ci-jobs.rst create mode 100644 docs/devel/ci-runners.rst -- 2.31.1 ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] docs: split the CI docs into two files 2021-08-20 21:09 [PATCH 0/2] docs: add definitions of terms for CI/testing Willian Rampazzo @ 2021-08-20 21:09 ` Willian Rampazzo 2021-08-20 21:09 ` [PATCH 2/2] docs: add definitions of terms for CI/testing Willian Rampazzo 1 sibling, 0 replies; 5+ messages in thread From: Willian Rampazzo @ 2021-08-20 21:09 UTC (permalink / raw) To: qemu-devel Cc: Thomas Huth, Daniel P . Berrangé, Philippe Mathieu-Daudé, Wainer dos Santos Moschetta, Cleber Rosa, Alex Bennée From: Daniel P. Berrangé <berrange@redhat.com> This splits the CI docs into one file talking about job setup and usage and another file describing provisioning of custom runners. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210812180403.4129067-2-berrange@redhat.com> --- docs/devel/ci-jobs.rst | 40 ++++++++++ docs/devel/ci-runners.rst | 117 ++++++++++++++++++++++++++++ docs/devel/ci.rst | 159 +------------------------------------- 3 files changed, 159 insertions(+), 157 deletions(-) create mode 100644 docs/devel/ci-jobs.rst create mode 100644 docs/devel/ci-runners.rst diff --git a/docs/devel/ci-jobs.rst b/docs/devel/ci-jobs.rst new file mode 100644 index 0000000000..9cd9819786 --- /dev/null +++ b/docs/devel/ci-jobs.rst @@ -0,0 +1,40 @@ +Custom CI/CD variables +====================== + +QEMU CI pipelines can be tuned by setting some CI environment variables. + +Set variable globally in the user's CI namespace +------------------------------------------------ + +Variables can be set globally in the user's CI namespace setting. + +For further information about how to set these variables, please refer to:: + + https://docs.gitlab.com/ee/ci/variables/#add-a-cicd-variable-to-a-project + +Set variable manually when pushing a branch or tag to the user's repository +--------------------------------------------------------------------------- + +Variables can be set manually when pushing a branch or tag, using +git-push command line arguments. + +Example setting the QEMU_CI_EXAMPLE_VAR variable: + +.. code:: + + git push -o ci.variable="QEMU_CI_EXAMPLE_VAR=value" myrepo mybranch + +For further information about how to set these variables, please refer to:: + + https://docs.gitlab.com/ee/user/project/push_options.html#push-options-for-gitlab-cicd + +Here is a list of the most used variables: + +QEMU_CI_AVOCADO_TESTING +~~~~~~~~~~~~~~~~~~~~~~~ +By default, tests using the Avocado framework are not run automatically in +the pipelines (because multiple artifacts have to be downloaded, and if +these artifacts are not already cached, downloading them make the jobs +reach the timeout limit). Set this variable to have the tests using the +Avocado framework run automatically. + diff --git a/docs/devel/ci-runners.rst b/docs/devel/ci-runners.rst new file mode 100644 index 0000000000..7817001fb2 --- /dev/null +++ b/docs/devel/ci-runners.rst @@ -0,0 +1,117 @@ +Jobs on Custom Runners +====================== + +Besides the jobs run under the various CI systems listed before, there +are a number additional jobs that will run before an actual merge. +These use the same GitLab CI's service/framework already used for all +other GitLab based CI jobs, but rely on additional systems, not the +ones provided by GitLab as "shared runners". + +The architecture of GitLab's CI service allows different machines to +be set up with GitLab's "agent", called gitlab-runner, which will take +care of running jobs created by events such as a push to a branch. +Here, the combination of a machine, properly configured with GitLab's +gitlab-runner, is called a "custom runner". + +The GitLab CI jobs definition for the custom runners are located under:: + + .gitlab-ci.d/custom-runners.yml + +Custom runners entail custom machines. To see a list of the machines +currently deployed in the QEMU GitLab CI and their maintainers, please +refer to the QEMU `wiki <https://wiki.qemu.org/AdminContacts>`__. + +Machine Setup Howto +------------------- + +For all Linux based systems, the setup can be mostly automated by the +execution of two Ansible playbooks. Create an ``inventory`` file +under ``scripts/ci/setup``, such as this:: + + fully.qualified.domain + other.machine.hostname + +You may need to set some variables in the inventory file itself. One +very common need is to tell Ansible to use a Python 3 interpreter on +those hosts. This would look like:: + + fully.qualified.domain ansible_python_interpreter=/usr/bin/python3 + other.machine.hostname ansible_python_interpreter=/usr/bin/python3 + +Build environment +~~~~~~~~~~~~~~~~~ + +The ``scripts/ci/setup/build-environment.yml`` Ansible playbook will +set up machines with the environment needed to perform builds and run +QEMU tests. This playbook consists on the installation of various +required packages (and a general package update while at it). It +currently covers a number of different Linux distributions, but it can +be expanded to cover other systems. + +The minimum required version of Ansible successfully tested in this +playbook is 2.8.0 (a version check is embedded within the playbook +itself). To run the playbook, execute:: + + cd scripts/ci/setup + ansible-playbook -i inventory build-environment.yml + +Please note that most of the tasks in the playbook require superuser +privileges, such as those from the ``root`` account or those obtained +by ``sudo``. If necessary, please refer to ``ansible-playbook`` +options such as ``--become``, ``--become-method``, ``--become-user`` +and ``--ask-become-pass``. + +gitlab-runner setup and registration +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The gitlab-runner agent needs to be installed on each machine that +will run jobs. The association between a machine and a GitLab project +happens with a registration token. To find the registration token for +your repository/project, navigate on GitLab's web UI to: + + * Settings (the gears-like icon at the bottom of the left hand side + vertical toolbar), then + * CI/CD, then + * Runners, and click on the "Expand" button, then + * Under "Set up a specific Runner manually", look for the value under + "And this registration token:" + +Copy the ``scripts/ci/setup/vars.yml.template`` file to +``scripts/ci/setup/vars.yml``. Then, set the +``gitlab_runner_registration_token`` variable to the value obtained +earlier. + +To run the playbook, execute:: + + cd scripts/ci/setup + ansible-playbook -i inventory gitlab-runner.yml + +Following the registration, it's necessary to configure the runner tags, +and optionally other configurations on the GitLab UI. Navigate to: + + * Settings (the gears like icon), then + * CI/CD, then + * Runners, and click on the "Expand" button, then + * "Runners activated for this project", then + * Click on the "Edit" icon (next to the "Lock" Icon) + +Tags are very important as they are used to route specific jobs to +specific types of runners, so it's a good idea to double check that +the automatically created tags are consistent with the OS and +architecture. For instance, an Ubuntu 20.04 aarch64 system should +have tags set as:: + + ubuntu_20.04,aarch64 + +Because the job definition at ``.gitlab-ci.d/custom-runners.yml`` +would contain:: + + ubuntu-20.04-aarch64-all: + tags: + - ubuntu_20.04 + - aarch64 + +It's also recommended to: + + * increase the "Maximum job timeout" to something like ``2h`` + * give it a better Description diff --git a/docs/devel/ci.rst b/docs/devel/ci.rst index 205572510c..a6a650968b 100644 --- a/docs/devel/ci.rst +++ b/docs/devel/ci.rst @@ -8,160 +8,5 @@ found at:: https://wiki.qemu.org/Testing/CI -Custom CI/CD variables -====================== - -QEMU CI pipelines can be tuned by setting some CI environment variables. - -Set variable globally in the user's CI namespace ------------------------------------------------- - -Variables can be set globally in the user's CI namespace setting. - -For further information about how to set these variables, please refer to:: - - https://docs.gitlab.com/ee/ci/variables/#add-a-cicd-variable-to-a-project - -Set variable manually when pushing a branch or tag to the user's repository ---------------------------------------------------------------------------- - -Variables can be set manually when pushing a branch or tag, using -git-push command line arguments. - -Example setting the QEMU_CI_EXAMPLE_VAR variable: - -.. code:: - - git push -o ci.variable="QEMU_CI_EXAMPLE_VAR=value" myrepo mybranch - -For further information about how to set these variables, please refer to:: - - https://docs.gitlab.com/ee/user/project/push_options.html#push-options-for-gitlab-cicd - -Here is a list of the most used variables: - -QEMU_CI_AVOCADO_TESTING -~~~~~~~~~~~~~~~~~~~~~~~ -By default, tests using the Avocado framework are not run automatically in -the pipelines (because multiple artifacts have to be downloaded, and if -these artifacts are not already cached, downloading them make the jobs -reach the timeout limit). Set this variable to have the tests using the -Avocado framework run automatically. - -Jobs on Custom Runners -====================== - -Besides the jobs run under the various CI systems listed before, there -are a number additional jobs that will run before an actual merge. -These use the same GitLab CI's service/framework already used for all -other GitLab based CI jobs, but rely on additional systems, not the -ones provided by GitLab as "shared runners". - -The architecture of GitLab's CI service allows different machines to -be set up with GitLab's "agent", called gitlab-runner, which will take -care of running jobs created by events such as a push to a branch. -Here, the combination of a machine, properly configured with GitLab's -gitlab-runner, is called a "custom runner". - -The GitLab CI jobs definition for the custom runners are located under:: - - .gitlab-ci.d/custom-runners.yml - -Custom runners entail custom machines. To see a list of the machines -currently deployed in the QEMU GitLab CI and their maintainers, please -refer to the QEMU `wiki <https://wiki.qemu.org/AdminContacts>`__. - -Machine Setup Howto -------------------- - -For all Linux based systems, the setup can be mostly automated by the -execution of two Ansible playbooks. Create an ``inventory`` file -under ``scripts/ci/setup``, such as this:: - - fully.qualified.domain - other.machine.hostname - -You may need to set some variables in the inventory file itself. One -very common need is to tell Ansible to use a Python 3 interpreter on -those hosts. This would look like:: - - fully.qualified.domain ansible_python_interpreter=/usr/bin/python3 - other.machine.hostname ansible_python_interpreter=/usr/bin/python3 - -Build environment -~~~~~~~~~~~~~~~~~ - -The ``scripts/ci/setup/build-environment.yml`` Ansible playbook will -set up machines with the environment needed to perform builds and run -QEMU tests. This playbook consists on the installation of various -required packages (and a general package update while at it). It -currently covers a number of different Linux distributions, but it can -be expanded to cover other systems. - -The minimum required version of Ansible successfully tested in this -playbook is 2.8.0 (a version check is embedded within the playbook -itself). To run the playbook, execute:: - - cd scripts/ci/setup - ansible-playbook -i inventory build-environment.yml - -Please note that most of the tasks in the playbook require superuser -privileges, such as those from the ``root`` account or those obtained -by ``sudo``. If necessary, please refer to ``ansible-playbook`` -options such as ``--become``, ``--become-method``, ``--become-user`` -and ``--ask-become-pass``. - -gitlab-runner setup and registration -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -The gitlab-runner agent needs to be installed on each machine that -will run jobs. The association between a machine and a GitLab project -happens with a registration token. To find the registration token for -your repository/project, navigate on GitLab's web UI to: - - * Settings (the gears-like icon at the bottom of the left hand side - vertical toolbar), then - * CI/CD, then - * Runners, and click on the "Expand" button, then - * Under "Set up a specific Runner manually", look for the value under - "And this registration token:" - -Copy the ``scripts/ci/setup/vars.yml.template`` file to -``scripts/ci/setup/vars.yml``. Then, set the -``gitlab_runner_registration_token`` variable to the value obtained -earlier. - -To run the playbook, execute:: - - cd scripts/ci/setup - ansible-playbook -i inventory gitlab-runner.yml - -Following the registration, it's necessary to configure the runner tags, -and optionally other configurations on the GitLab UI. Navigate to: - - * Settings (the gears like icon), then - * CI/CD, then - * Runners, and click on the "Expand" button, then - * "Runners activated for this project", then - * Click on the "Edit" icon (next to the "Lock" Icon) - -Tags are very important as they are used to route specific jobs to -specific types of runners, so it's a good idea to double check that -the automatically created tags are consistent with the OS and -architecture. For instance, an Ubuntu 20.04 aarch64 system should -have tags set as:: - - ubuntu_20.04,aarch64 - -Because the job definition at ``.gitlab-ci.d/custom-runners.yml`` -would contain:: - - ubuntu-20.04-aarch64-all: - tags: - - ubuntu_20.04 - - aarch64 - -It's also recommended to: - - * increase the "Maximum job timeout" to something like ``2h`` - * give it a better Description +.. include:: ci-jobs.rst +.. include:: ci-runners.rst -- 2.31.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] docs: add definitions of terms for CI/testing 2021-08-20 21:09 [PATCH 0/2] docs: add definitions of terms for CI/testing Willian Rampazzo 2021-08-20 21:09 ` [PATCH 1/2] docs: split the CI docs into two files Willian Rampazzo @ 2021-08-20 21:09 ` Willian Rampazzo 2021-08-20 22:54 ` Philippe Mathieu-Daudé 2021-08-30 13:34 ` Philippe Mathieu-Daudé 1 sibling, 2 replies; 5+ messages in thread From: Willian Rampazzo @ 2021-08-20 21:09 UTC (permalink / raw) To: qemu-devel Cc: Thomas Huth, Daniel P . Berrangé, Philippe Mathieu-Daudé, Wainer dos Santos Moschetta, Cleber Rosa, Alex Bennée To understand the current state of QEMU CI/testing and have a base to discuss the plans for the future, it is important to define some usual terms. This patch defines the terms for "Automated tests", "Unit testing", "Functional testing", "System testing", "Flaky tests", "Gating", and "Continuous Integration". The first patch was borrowed from 20210812180403.4129067-1-berrange@redhat.com. Signed-off-by: Willian Rampazzo <willianr@redhat.com> --- docs/devel/ci-definitions.rst | 121 ++++++++++++++++++++++++++++++++++ docs/devel/ci.rst | 1 + 2 files changed, 122 insertions(+) create mode 100644 docs/devel/ci-definitions.rst diff --git a/docs/devel/ci-definitions.rst b/docs/devel/ci-definitions.rst new file mode 100644 index 0000000000..32e22ff468 --- /dev/null +++ b/docs/devel/ci-definitions.rst @@ -0,0 +1,121 @@ +Definition of terms +=================== + +This section defines the terms used in this document and correlates them with +what is currently used on QEMU. + +Automated tests +--------------- + +An automated test is written on a test framework using its generic test +functions/classes. The test framework can run the tests and report their +success or failure [1]_. + +An automated test has essentially three parts: + +1. The test initialization of the parameters, where the expected parameters, + like inputs and expected results, are set up; +2. The call to the code that should be tested; +3. An assertion, comparing the result from the previous call with the expected + result set during the initialization of the parameters. If the result + matches the expected result, the test has been successful; otherwise, it has + failed. + +Unit testing +------------ + +A unit test is responsible for exercising individual software components as a +unit, like interfaces, data structures, and functionality, uncovering errors +within the boundaries of a component. The verification effort is in the +smallest software unit and focuses on the internal processing logic and data +structures. A test case of unit tests should be designed to uncover errors due +to erroneous computations, incorrect comparisons, or improper control flow [2]_. + +On QEMU, unit testing is represented by the 'check-unit' target from 'make'. + +Functional testing +------------------ + +A functional test focuses on the functional requirement of the software. +Deriving sets of input conditions, the functional tests should fully exercise +all the functional requirements for a program. Functional testing is +complementary to other testing techniques, attempting to find errors like +incorrect or missing functions, interface errors, behavior errors, and +initialization and termination errors [3]_. + +On QEMU, functional testing is represented by the 'check-qtest' target from +'make'. + +System testing +-------------- + +System tests ensure all application elements mesh properly while the overall +functionality and performance are achieved [4]_. Some or all system components +are integrated to create a complete system to be tested as a whole. System +testing ensures that components are compatible, interact correctly, and +transfer the right data at the right time across their interfaces. As system +testing focuses on interactions, use case-based testing is a practical approach +to system testing [5]_. Note that, in some cases, system testing may require +interaction with third-party software, like operating system images, databases, +networks, and so on. + +On QEMU, system testing is represented by the 'check-acceptance' target from +'make'. + +Flaky tests +----------- + +A flaky test is defined as a test that exhibits both a passing and a failing +result with the same code on different runs. Some usual reasons for an +intermittent/flaky test are async wait, concurrency, and test order dependency +[6]_. + +Gating +------ + +A gate restricts the move of code from one stage to another on a +test/deployment pipeline. The step move is granted with approval. The approval +can be a manual intervention or a set of tests succeeding [7]_. + +On QEMU, the gating process happens during the pull request. The approval is +done by the project leader running its own set of tests. The pull request gets +merged when the tests succeed. + +Continuous Integration (CI) +--------------------------- + +Continuous integration (CI) requires the builds of the entire application and +the execution of a comprehensive set of automated tests every time there is a +need to commit any set of changes [8]_. The automated tests can be composed of +the unit, functional, system, and other tests. + +Keynotes about continuous integration (CI) [9]_: + +1. System tests may depend on external software (operating system images, + firmware, database, network). +2. It may take a long time to build and test. It may be impractical to build + the system being developed several times per day. +3. If the development platform is different from the target platform, it may + not be possible to run system tests in the developer’s private workspace. + There may be differences in hardware, operating system, or installed + software. Therefore, more time is required for testing the system. + +References +---------- + +.. [1] Sommerville, Ian (2016). Software Engineering. p. 233. +.. [2] Pressman, Roger S. & Maxim, Bruce R. (2020). Software Engineering, + A Practitioner’s Approach. p. 48, 376, 378, 381. +.. [3] Pressman, Roger S. & Maxim, Bruce R. (2020). Software Engineering, + A Practitioner’s Approach. p. 388. +.. [4] Pressman, Roger S. & Maxim, Bruce R. (2020). Software Engineering, + A Practitioner’s Approach. Software Engineering, p. 377. +.. [5] Sommerville, Ian (2016). Software Engineering. p. 59, 232, 240. +.. [6] Luo, Qingzhou, et al. An empirical analysis of flaky tests. + Proceedings of the 22nd ACM SIGSOFT International Symposium on + Foundations of Software Engineering. 2014. +.. [7] Humble, Jez & Farley, David (2010). Continuous Delivery: + Reliable Software Releases Through Build, Test, and Deployment, p. 122. +.. [8] Humble, Jez & Farley, David (2010). Continuous Delivery: + Reliable Software Releases Through Build, Test, and Deployment, p. 55. +.. [9] Sommerville, Ian (2016). Software Engineering. p. 743. diff --git a/docs/devel/ci.rst b/docs/devel/ci.rst index a6a650968b..8d95247188 100644 --- a/docs/devel/ci.rst +++ b/docs/devel/ci.rst @@ -8,5 +8,6 @@ found at:: https://wiki.qemu.org/Testing/CI +.. include:: ci-definitions.rst .. include:: ci-jobs.rst .. include:: ci-runners.rst -- 2.31.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 2/2] docs: add definitions of terms for CI/testing 2021-08-20 21:09 ` [PATCH 2/2] docs: add definitions of terms for CI/testing Willian Rampazzo @ 2021-08-20 22:54 ` Philippe Mathieu-Daudé 2021-08-30 13:34 ` Philippe Mathieu-Daudé 1 sibling, 0 replies; 5+ messages in thread From: Philippe Mathieu-Daudé @ 2021-08-20 22:54 UTC (permalink / raw) To: Willian Rampazzo, qemu-devel Cc: Thomas Huth, Daniel P . Berrangé, John Snow, Cornelia Huck, Dr. David Alan Gilbert, Wainer dos Santos Moschetta, Cleber Rosa, Alex Bennée, David Gibson On 8/20/21 11:09 PM, Willian Rampazzo wrote: > To understand the current state of QEMU CI/testing and have a base to > discuss the plans for the future, it is important to define some usual > terms. This patch defines the terms for "Automated tests", "Unit > testing", "Functional testing", "System testing", "Flaky tests", > "Gating", and "Continuous Integration". > > The first patch was borrowed from > 20210812180403.4129067-1-berrange@redhat.com. > > Signed-off-by: Willian Rampazzo <willianr@redhat.com> > --- > docs/devel/ci-definitions.rst | 121 ++++++++++++++++++++++++++++++++++ > docs/devel/ci.rst | 1 + > 2 files changed, 122 insertions(+) > create mode 100644 docs/devel/ci-definitions.rst Wow, super cool! Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> > diff --git a/docs/devel/ci-definitions.rst b/docs/devel/ci-definitions.rst > new file mode 100644 > index 0000000000..32e22ff468 > --- /dev/null > +++ b/docs/devel/ci-definitions.rst > @@ -0,0 +1,121 @@ > +Definition of terms > +=================== > + > +This section defines the terms used in this document and correlates them with > +what is currently used on QEMU. > + > +Automated tests > +--------------- > + > +An automated test is written on a test framework using its generic test > +functions/classes. The test framework can run the tests and report their > +success or failure [1]_. > + > +An automated test has essentially three parts: > + > +1. The test initialization of the parameters, where the expected parameters, > + like inputs and expected results, are set up; > +2. The call to the code that should be tested; > +3. An assertion, comparing the result from the previous call with the expected > + result set during the initialization of the parameters. If the result > + matches the expected result, the test has been successful; otherwise, it has > + failed. > + > +Unit testing > +------------ > + > +A unit test is responsible for exercising individual software components as a > +unit, like interfaces, data structures, and functionality, uncovering errors > +within the boundaries of a component. The verification effort is in the > +smallest software unit and focuses on the internal processing logic and data > +structures. A test case of unit tests should be designed to uncover errors due > +to erroneous computations, incorrect comparisons, or improper control flow [2]_. > + > +On QEMU, unit testing is represented by the 'check-unit' target from 'make'. > + > +Functional testing > +------------------ > + > +A functional test focuses on the functional requirement of the software. > +Deriving sets of input conditions, the functional tests should fully exercise > +all the functional requirements for a program. Functional testing is > +complementary to other testing techniques, attempting to find errors like > +incorrect or missing functions, interface errors, behavior errors, and > +initialization and termination errors [3]_. > + > +On QEMU, functional testing is represented by the 'check-qtest' target from > +'make'. > + > +System testing > +-------------- > + > +System tests ensure all application elements mesh properly while the overall > +functionality and performance are achieved [4]_. Some or all system components > +are integrated to create a complete system to be tested as a whole. System > +testing ensures that components are compatible, interact correctly, and > +transfer the right data at the right time across their interfaces. As system > +testing focuses on interactions, use case-based testing is a practical approach > +to system testing [5]_. Note that, in some cases, system testing may require > +interaction with third-party software, like operating system images, databases, > +networks, and so on. > + > +On QEMU, system testing is represented by the 'check-acceptance' target from > +'make'. > + > +Flaky tests > +----------- > + > +A flaky test is defined as a test that exhibits both a passing and a failing > +result with the same code on different runs. Some usual reasons for an > +intermittent/flaky test are async wait, concurrency, and test order dependency > +[6]_. > + > +Gating > +------ > + > +A gate restricts the move of code from one stage to another on a > +test/deployment pipeline. The step move is granted with approval. The approval > +can be a manual intervention or a set of tests succeeding [7]_. > + > +On QEMU, the gating process happens during the pull request. The approval is > +done by the project leader running its own set of tests. The pull request gets > +merged when the tests succeed. > + > +Continuous Integration (CI) > +--------------------------- > + > +Continuous integration (CI) requires the builds of the entire application and > +the execution of a comprehensive set of automated tests every time there is a > +need to commit any set of changes [8]_. The automated tests can be composed of > +the unit, functional, system, and other tests. > + > +Keynotes about continuous integration (CI) [9]_: > + > +1. System tests may depend on external software (operating system images, > + firmware, database, network). > +2. It may take a long time to build and test. It may be impractical to build > + the system being developed several times per day. > +3. If the development platform is different from the target platform, it may > + not be possible to run system tests in the developer’s private workspace. > + There may be differences in hardware, operating system, or installed > + software. Therefore, more time is required for testing the system. > + > +References > +---------- > + > +.. [1] Sommerville, Ian (2016). Software Engineering. p. 233. > +.. [2] Pressman, Roger S. & Maxim, Bruce R. (2020). Software Engineering, > + A Practitioner’s Approach. p. 48, 376, 378, 381. > +.. [3] Pressman, Roger S. & Maxim, Bruce R. (2020). Software Engineering, > + A Practitioner’s Approach. p. 388. > +.. [4] Pressman, Roger S. & Maxim, Bruce R. (2020). Software Engineering, > + A Practitioner’s Approach. Software Engineering, p. 377. > +.. [5] Sommerville, Ian (2016). Software Engineering. p. 59, 232, 240. > +.. [6] Luo, Qingzhou, et al. An empirical analysis of flaky tests. > + Proceedings of the 22nd ACM SIGSOFT International Symposium on > + Foundations of Software Engineering. 2014. > +.. [7] Humble, Jez & Farley, David (2010). Continuous Delivery: > + Reliable Software Releases Through Build, Test, and Deployment, p. 122. > +.. [8] Humble, Jez & Farley, David (2010). Continuous Delivery: > + Reliable Software Releases Through Build, Test, and Deployment, p. 55. > +.. [9] Sommerville, Ian (2016). Software Engineering. p. 743. > diff --git a/docs/devel/ci.rst b/docs/devel/ci.rst > index a6a650968b..8d95247188 100644 > --- a/docs/devel/ci.rst > +++ b/docs/devel/ci.rst > @@ -8,5 +8,6 @@ found at:: > > https://wiki.qemu.org/Testing/CI > > +.. include:: ci-definitions.rst > .. include:: ci-jobs.rst > .. include:: ci-runners.rst > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 2/2] docs: add definitions of terms for CI/testing 2021-08-20 21:09 ` [PATCH 2/2] docs: add definitions of terms for CI/testing Willian Rampazzo 2021-08-20 22:54 ` Philippe Mathieu-Daudé @ 2021-08-30 13:34 ` Philippe Mathieu-Daudé 1 sibling, 0 replies; 5+ messages in thread From: Philippe Mathieu-Daudé @ 2021-08-30 13:34 UTC (permalink / raw) To: Willian Rampazzo, qemu-devel, QEMU Trivial Cc: Daniel P . Berrangé, Thomas Huth, Alex Bennée, Wainer dos Santos Moschetta, Cleber Rosa On 8/20/21 11:09 PM, Willian Rampazzo wrote: > To understand the current state of QEMU CI/testing and have a base to > discuss the plans for the future, it is important to define some usual > terms. This patch defines the terms for "Automated tests", "Unit > testing", "Functional testing", "System testing", "Flaky tests", > "Gating", and "Continuous Integration". > > The first patch was borrowed from > 20210812180403.4129067-1-berrange@redhat.com. ^ These 2 lines belong to the cover and are irrelevant in this context. Cc'ing qemu-trivial@ otherwise (patch reviewed). > Signed-off-by: Willian Rampazzo <willianr@redhat.com> > --- > docs/devel/ci-definitions.rst | 121 ++++++++++++++++++++++++++++++++++ > docs/devel/ci.rst | 1 + > 2 files changed, 122 insertions(+) > create mode 100644 docs/devel/ci-definitions.rst ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-08-30 13:35 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-08-20 21:09 [PATCH 0/2] docs: add definitions of terms for CI/testing Willian Rampazzo 2021-08-20 21:09 ` [PATCH 1/2] docs: split the CI docs into two files Willian Rampazzo 2021-08-20 21:09 ` [PATCH 2/2] docs: add definitions of terms for CI/testing Willian Rampazzo 2021-08-20 22:54 ` Philippe Mathieu-Daudé 2021-08-30 13:34 ` Philippe Mathieu-Daudé
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.