From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v2 1/4] powerpc/64: handle MSR EE and RI in interrupt entry wrapper
Date: Wed, 25 Aug 2021 22:37:11 +1000 [thread overview]
Message-ID: <20210825123714.706201-2-npiggin@gmail.com> (raw)
In-Reply-To: <20210825123714.706201-1-npiggin@gmail.com>
Similarly to the system call change in the previous patch, the mtmsrd to
enable RI can be combined with the mtmsrd to enable EE for interrupts
which enable the latter, which tends to be the important synchronous
interrupts (i.e., page faults).
Do this by enabling EE and RI together at the beginning of the entry
wrapper if PACA_IRQ_HARD_DIS is clear, and just enabling RI if it is set
(which means something wanted EE=0).
Asynchronous interrupts set PACA_IRQ_HARD_DIS, but synchronous ones
leave it unchanged, so by default they always get EE=1 unless they
interrupt a caller that has hard disabled. When the sync interrupt
later calls interrupt_cond_local_irq_enable(), that will not require
another mtmsrd because we already enabled here.
64e is conceptually unchanged, but it also sets MSR[EE]=1 now in the
interrupt wrapper for synchronous interrupts with the same code.
On 64s, saves one mtmsrd L=1 for synchronous interrupts on 64s, which
saves about 20 cycles. For kernel-mode interrupts, both synchronous and
asynchronous, this saves an additional ~40 cycles due to the mtmsrd
being moved ahead of mfspr SPRN_AMR, which prevents a SPR scoreboard
stall (on POWER9).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/include/asm/interrupt.h | 31 ++++++++++++++++++++++++----
arch/powerpc/kernel/exceptions-64s.S | 30 ---------------------------
arch/powerpc/kernel/fpu.S | 5 +++++
arch/powerpc/kernel/vector.S | 8 +++++++
4 files changed, 40 insertions(+), 34 deletions(-)
diff --git a/arch/powerpc/include/asm/interrupt.h b/arch/powerpc/include/asm/interrupt.h
index 6b800d3e2681..e3228a911b35 100644
--- a/arch/powerpc/include/asm/interrupt.h
+++ b/arch/powerpc/include/asm/interrupt.h
@@ -148,9 +148,21 @@ static inline void interrupt_enter_prepare(struct pt_regs *regs, struct interrup
#endif
#ifdef CONFIG_PPC64
- if (irq_soft_mask_set_return(IRQS_ALL_DISABLED) == IRQS_ENABLED)
+ bool trace_enable = false;
+
+ if (IS_ENABLED(CONFIG_TRACE_IRQFLAGS)) {
+ if (irq_soft_mask_set_return(IRQS_DISABLED) == IRQS_ENABLED)
+ trace_enable = true;
+ } else {
+ irq_soft_mask_set(IRQS_DISABLED);
+ }
+ /* If the interrupt was taken with HARD_DIS set, don't enable MSR[EE] */
+ if (local_paca->irq_happened & PACA_IRQ_HARD_DIS)
+ __hard_RI_enable();
+ else
+ __hard_irq_enable();
+ if (trace_enable)
trace_hardirqs_off();
- local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
if (user_mode(regs)) {
CT_WARN_ON(ct_state() != CONTEXT_USER);
@@ -200,13 +212,20 @@ static inline void interrupt_exit_prepare(struct pt_regs *regs, struct interrupt
static inline void interrupt_async_enter_prepare(struct pt_regs *regs, struct interrupt_state *state)
{
+#ifdef CONFIG_PPC64
+ /* Ensure interrupt_enter_prepare does not enable MSR[EE] */
+ local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
+#endif
+ interrupt_enter_prepare(regs, state);
#ifdef CONFIG_PPC_BOOK3S_64
+ /*
+ * MSR[RI] is only enabled after interrupt_enter_prepare, so this
+ * thread flags access has to come afterward.
+ */
if (cpu_has_feature(CPU_FTR_CTRL) &&
!test_thread_local_flags(_TLF_RUNLATCH))
__ppc64_runlatch_on();
#endif
-
- interrupt_enter_prepare(regs, state);
irq_enter();
}
@@ -273,6 +292,8 @@ static inline void interrupt_nmi_enter_prepare(struct pt_regs *regs, struct inte
if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
BUG_ON(!arch_irq_disabled_regs(regs) && !(regs->msr & MSR_EE));
+ __hard_RI_enable();
+
/* Don't do any per-CPU operations until interrupt state is fixed */
if (nmi_disables_ftrace(regs)) {
@@ -370,6 +391,8 @@ interrupt_handler long func(struct pt_regs *regs) \
{ \
long ret; \
\
+ __hard_RI_enable(); \
+ \
ret = ____##func (regs); \
\
return ret; \
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 4aec59a77d4c..69a472c38f62 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -113,7 +113,6 @@ name:
#define IISIDE .L_IISIDE_\name\() /* Uses SRR0/1 not DAR/DSISR */
#define IDAR .L_IDAR_\name\() /* Uses DAR (or SRR0) */
#define IDSISR .L_IDSISR_\name\() /* Uses DSISR (or SRR1) */
-#define ISET_RI .L_ISET_RI_\name\() /* Run common code w/ MSR[RI]=1 */
#define IBRANCH_TO_COMMON .L_IBRANCH_TO_COMMON_\name\() /* ENTRY branch to common */
#define IREALMODE_COMMON .L_IREALMODE_COMMON_\name\() /* Common runs in realmode */
#define IMASK .L_IMASK_\name\() /* IRQ soft-mask bit */
@@ -157,9 +156,6 @@ do_define_int n
.ifndef IDSISR
IDSISR=0
.endif
- .ifndef ISET_RI
- ISET_RI=1
- .endif
.ifndef IBRANCH_TO_COMMON
IBRANCH_TO_COMMON=1
.endif
@@ -512,11 +508,6 @@ DEFINE_FIXED_SYMBOL(\name\()_common_real)
stb r10,PACASRR_VALID(r13)
.endif
- .if ISET_RI
- li r10,MSR_RI
- mtmsrd r10,1 /* Set MSR_RI */
- .endif
-
.if ISTACK
.if IKUAP
kuap_save_amr_and_lock r9, r10, cr1, cr0
@@ -901,11 +892,6 @@ INT_DEFINE_BEGIN(system_reset)
IVEC=0x100
IAREA=PACA_EXNMI
IVIRT=0 /* no virt entry point */
- /*
- * MSR_RI is not enabled, because PACA_EXNMI and nmi stack is
- * being used, so a nested NMI exception would corrupt it.
- */
- ISET_RI=0
ISTACK=0
IKVM_REAL=1
INT_DEFINE_END(system_reset)
@@ -986,8 +972,6 @@ EXC_COMMON_BEGIN(system_reset_common)
lhz r10,PACA_IN_NMI(r13)
addi r10,r10,1
sth r10,PACA_IN_NMI(r13)
- li r10,MSR_RI
- mtmsrd r10,1
mr r10,r1
ld r1,PACA_NMI_EMERG_SP(r13)
@@ -1061,12 +1045,6 @@ INT_DEFINE_BEGIN(machine_check_early)
IAREA=PACA_EXMC
IVIRT=0 /* no virt entry point */
IREALMODE_COMMON=1
- /*
- * MSR_RI is not enabled, because PACA_EXMC is being used, so a
- * nested machine check corrupts it. machine_check_common enables
- * MSR_RI.
- */
- ISET_RI=0
ISTACK=0
IDAR=1
IDSISR=1
@@ -1077,7 +1055,6 @@ INT_DEFINE_BEGIN(machine_check)
IVEC=0x200
IAREA=PACA_EXMC
IVIRT=0 /* no virt entry point */
- ISET_RI=0
IDAR=1
IDSISR=1
IKVM_REAL=1
@@ -1147,9 +1124,6 @@ EXC_COMMON_BEGIN(machine_check_early_common)
BEGIN_FTR_SECTION
bl enable_machine_check
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
- li r10,MSR_RI
- mtmsrd r10,1
-
addi r3,r1,STACK_FRAME_OVERHEAD
bl machine_check_early
std r3,RESULT(r1) /* Save result */
@@ -1237,10 +1211,6 @@ EXC_COMMON_BEGIN(machine_check_common)
* save area: PACA_EXMC instead of PACA_EXGEN.
*/
GEN_COMMON machine_check
-
- /* Enable MSR_RI when finished with PACA_EXMC */
- li r10,MSR_RI
- mtmsrd r10,1
addi r3,r1,STACK_FRAME_OVERHEAD
bl machine_check_exception
b interrupt_return_srr
diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index 6010adcee16e..eabd578cb772 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -81,7 +81,12 @@ EXPORT_SYMBOL(store_fp_state)
*/
_GLOBAL(load_up_fpu)
mfmsr r5
+#ifdef CONFIG_PPC_BOOK3S_64
+ /* interrupt doesn't set MSR[RI] and HPT can fault on current access */
+ ori r5,r5,MSR_FP|MSR_RI
+#else
ori r5,r5,MSR_FP
+#endif
#ifdef CONFIG_VSX
BEGIN_FTR_SECTION
oris r5,r5,MSR_VSX@h
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index fc120fac1910..ead2900d9bb0 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -47,6 +47,10 @@ EXPORT_SYMBOL(store_vr_state)
*/
_GLOBAL(load_up_altivec)
mfmsr r5 /* grab the current MSR */
+#ifdef CONFIG_PPC_BOOK3S_64
+ /* interrupt doesn't set MSR[RI] and HPT can fault on current access */
+ ori r5,r5,MSR_RI
+#endif
oris r5,r5,MSR_VEC@h
MTMSRD(r5) /* enable use of AltiVec now */
isync
@@ -128,6 +132,10 @@ _GLOBAL(load_up_vsx)
andis. r5,r12,MSR_VEC@h
beql+ load_up_altivec /* skip if already loaded */
+ /* interrupt doesn't set MSR[RI] and HPT can fault on current access */
+ li r5,MSR_RI
+ mtmsrd r5,1
+
ld r4,PACACURRENT(r13)
addi r4,r4,THREAD /* Get THREAD */
li r6,1
--
2.23.0
next prev parent reply other threads:[~2021-08-25 12:38 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-25 12:37 [PATCH v2 0/4] powerpc/64s: interrupt speedups Nicholas Piggin
2021-08-25 12:37 ` Nicholas Piggin [this message]
2021-08-27 7:31 ` [PATCH v2 1/4] powerpc/64: handle MSR EE and RI in interrupt entry wrapper Daniel Axtens
2021-08-30 7:32 ` Nicholas Piggin
2021-08-25 12:37 ` [PATCH v2 2/4] powerpc/64s/perf: add power_pmu_wants_prompt_pmi to say whether perf wants PMIs to be soft-NMI Nicholas Piggin
2021-08-25 12:37 ` [PATCH v2 3/4] powerpc/64s/interrupt: Don't enable MSR[EE] in irq handlers unless perf is in use Nicholas Piggin
2021-08-26 15:04 ` kernel test robot
2021-08-26 15:04 ` kernel test robot
2021-08-27 1:33 ` Nicholas Piggin
2021-08-27 1:33 ` Nicholas Piggin
2021-08-25 12:37 ` [PATCH v2 4/4] powerpc/64s/interrupt: avoid saving CFAR in some asynchronous interrupts Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210825123714.706201-2-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.