[PATCH v5.10] mtd: spinand: Fix incorrect parameters for on-die ECC

[PATCH v5.10] mtd: spinand: Fix incorrect parameters for on-die ECC

[Frieder Schrempf]

From: Frieder Schrempf <frieder.schrempf@kontron.de>

The new generic NAND ECC framework stores the configuration and requirements
in separate places since commit 93ef92f6f422 (" mtd: nand: Use the new generic ECC object ").
In 5.10.x The SPI NAND layer still uses only the requirements to track the ECC
properties. This mismatch leads to values of zero being used for ECC strength
and step_size in the SPI NAND layer wherever nanddev_get_ecc_conf() is used and
therefore breaks the SPI NAND on-die ECC support in 5.10.x.

By using nanddev_get_ecc_requirements() instead of nanddev_get_ecc_conf() for
SPI NAND, we make sure that the correct parameters for the detected chip are
used. In later versions (5.11.x) this is fixed anyway with the implementation
of the SPI NAND on-die ECC engine.

Cc: stable@vger.kernel.org # 5.10.x
Reported-by: voice INTER connect GmbH <developer@voiceinterconnect.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
 drivers/mtd/nand/spi/core.c     | 6 +++---
 drivers/mtd/nand/spi/macronix.c | 6 +++---
 drivers/mtd/nand/spi/toshiba.c  | 6 +++---
 3 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 558d8a14810b..8794a1f6eacd 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -419,7 +419,7 @@ static int spinand_check_ecc_status(struct spinand_device *spinand, u8 status)
 		 * fixed, so let's return the maximum possible value so that
 		 * wear-leveling layers move the data immediately.
 		 */
-		return nanddev_get_ecc_conf(nand)->strength;
+		return nanddev_get_ecc_requirements(nand)->strength;
 
 	case STATUS_ECC_UNCOR_ERROR:
 		return -EBADMSG;
@@ -1090,8 +1090,8 @@ static int spinand_init(struct spinand_device *spinand)
 	mtd->oobavail = ret;
 
 	/* Propagate ECC information to mtd_info */
-	mtd->ecc_strength = nanddev_get_ecc_conf(nand)->strength;
-	mtd->ecc_step_size = nanddev_get_ecc_conf(nand)->step_size;
+	mtd->ecc_strength = nanddev_get_ecc_requirements(nand)->strength;
+	mtd->ecc_step_size = nanddev_get_ecc_requirements(nand)->step_size;
 
 	return 0;
 
diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
index 8e801e4c3a00..cd7a9cacc3fb 100644
--- a/drivers/mtd/nand/spi/macronix.c
+++ b/drivers/mtd/nand/spi/macronix.c
@@ -84,11 +84,11 @@ static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand,
 		 * data around if it's not necessary.
 		 */
 		if (mx35lf1ge4ab_get_eccsr(spinand, &eccsr))
-			return nanddev_get_ecc_conf(nand)->strength;
+			return nanddev_get_ecc_requirements(nand)->strength;
 
-		if (WARN_ON(eccsr > nanddev_get_ecc_conf(nand)->strength ||
+		if (WARN_ON(eccsr > nanddev_get_ecc_requirements(nand)->strength ||
 			    !eccsr))
-			return nanddev_get_ecc_conf(nand)->strength;
+			return nanddev_get_ecc_requirements(nand)->strength;
 
 		return eccsr;
 
diff --git a/drivers/mtd/nand/spi/toshiba.c b/drivers/mtd/nand/spi/toshiba.c
index 21fde2875674..6fe7bd2a94d2 100644
--- a/drivers/mtd/nand/spi/toshiba.c
+++ b/drivers/mtd/nand/spi/toshiba.c
@@ -90,12 +90,12 @@ static int tx58cxgxsxraix_ecc_get_status(struct spinand_device *spinand,
 		 * data around if it's not necessary.
 		 */
 		if (spi_mem_exec_op(spinand->spimem, &op))
-			return nanddev_get_ecc_conf(nand)->strength;
+			return nanddev_get_ecc_requirements(nand)->strength;
 
 		mbf >>= 4;
 
-		if (WARN_ON(mbf > nanddev_get_ecc_conf(nand)->strength || !mbf))
-			return nanddev_get_ecc_conf(nand)->strength;
+		if (WARN_ON(mbf > nanddev_get_ecc_requirements(nand)->strength || !mbf))
+			return nanddev_get_ecc_requirements(nand)->strength;
 
 		return mbf;
 
-- 
2.32.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/