* [PULL 00/37] target-arm queue
@ 2021-08-26 17:02 Peter Maydell
2021-08-26 17:02 ` [PULL 01/37] hw/arm/xlnx-zynqmp: Realize qspi controller *after* qspi_dma Peter Maydell
` (37 more replies)
0 siblings, 38 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
More accumulated patches from during the freeze...
The following changes since commit c83fcfaf8a54d0d034bd0edf7bbb3b0d16669be9:
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-08-26' into staging (2021-08-26 13:42:34 +0100)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210826
for you to fetch changes up to d2e6f370138a7f32bc28b20dcd55374b7a638f39:
hw/arm/xlnx-zynqmp: Add unimplemented APU mmio (2021-08-26 17:02:01 +0100)
----------------------------------------------------------------
target-arm queue:
* hw/dma/xlnx-zdma, xlnx_csu_dma: Require 'dma' link property to be set
* hw/arm/Kconfig: no need to enable ACPI_MEMORY_HOTPLUG/ACPI_NVDIMM explicitly
* target/arm/cpu: Introduce sve_vq_supported bitmap
* docs/specs: Convert ACPI spec docs to rST
* arch_init: Clean up and refactoring
* hw/core/loader: In gunzip(), check index is in range before use, not after
* softmmu/physmem.c: Remove unneeded NULL check in qemu_ram_alloc_from_fd()
* softmmu/physmem.c: Check return value from realpath()
* Zero-initialize sockaddr_in structs
* raspi: Use error_fatal for SoC realize errors, not error_abort
* target/arm: Avoid assertion trying to use KVM and multiple ASes
* target/arm: Implement HSTR.TTEE
* target/arm: Implement HSTR.TJDBX
* target/arm: Do hflags rebuild in cpsr_write()
* hw/arm/xlnx-versal, xlnx-zynqmp: Add unimplemented APU mmio
----------------------------------------------------------------
Andrew Jones (4):
target/arm/cpu: Introduce sve_vq_supported bitmap
target/arm/kvm64: Ensure sve vls map is completely clear
target/arm/cpu64: Replace kvm_supported with sve_vq_supported
target/arm/cpu64: Validate sve vector lengths are supported
Ani Sinha (1):
hw/arm/Kconfig: no need to enable ACPI_MEMORY_HOTPLUG/ACPI_NVDIMM explicitly
Peter Maydell (26):
docs/specs/acpu_cpu_hotplug: Convert to rST
docs/specs/acpi_mem_hotplug: Convert to rST
docs/specs/acpi_pci_hotplug: Convert to rST
docs/specs/acpi_nvdimm: Convert to rST
MAINTAINERS: Add ACPI specs documents to ACPI and NVDIMM sections
softmmu: Use accel_find("xen") instead of xen_available()
monitor: Use accel_find("kvm") instead of kvm_available()
softmmu/arch_init.c: Trim down include list
meson.build: Define QEMU_ARCH in config-target.h
arch_init.h: Add QEMU_ARCH_HEXAGON
arch_init.h: Move QEMU_ARCH_VIRTIO_* to qdev-monitor.c
arch_init.h: Don't include arch_init.h unnecessarily
stubs: Remove unused arch_type.c stub
hw/core/loader: In gunzip(), check index is in range before use, not after
softmmu/physmem.c: Remove unneeded NULL check in qemu_ram_alloc_from_fd()
softmmu/physmem.c: Check return value from realpath()
net: Zero sockaddr_in in parse_host_port()
gdbstub: Zero-initialize sockaddr structs
tests/qtest/ipmi-bt-test: Zero-initialize sockaddr struct
tests/tcg/multiarch/linux-test: Zero-initialize sockaddr structs
raspi: Use error_fatal for SoC realize errors, not error_abort
target/arm: Avoid assertion trying to use KVM and multiple ASes
hw/arm/virt: Delete EL3 error checksnow provided in CPU realize
target/arm: Implement HSTR.TTEE
target/arm: Implement HSTR.TJDBX
target/arm: Do hflags rebuild in cpsr_write()
Philippe Mathieu-Daudé (4):
hw/arm/xlnx-zynqmp: Realize qspi controller *after* qspi_dma
hw/dma/xlnx_csu_dma: Run trivial checks early in realize()
hw/dma/xlnx_csu_dma: Always expect 'dma' link property to be set
hw/dma/xlnx-zdma Always expect 'dma' link property to be set
Tong Ho (2):
hw/arm/xlnx-versal: Add unimplemented APU mmio
hw/arm/xlnx-zynqmp: Add unimplemented APU mmio
docs/specs/acpi_cpu_hotplug.rst | 235 +++++++++++++++++++++
docs/specs/acpi_cpu_hotplug.txt | 160 --------------
docs/specs/acpi_mem_hotplug.rst | 128 +++++++++++
docs/specs/acpi_mem_hotplug.txt | 94 ---------
docs/specs/acpi_nvdimm.rst | 228 ++++++++++++++++++++
docs/specs/acpi_nvdimm.txt | 188 -----------------
.../{acpi_pci_hotplug.txt => acpi_pci_hotplug.rst} | 37 ++--
docs/specs/index.rst | 4 +
meson.build | 2 +
include/hw/arm/xlnx-versal.h | 2 +
include/hw/arm/xlnx-zynqmp.h | 7 +
include/hw/dma/xlnx-zdma.h | 2 +-
include/hw/dma/xlnx_csu_dma.h | 2 +-
include/sysemu/arch_init.h | 15 +-
target/arm/cpu.h | 17 +-
target/arm/helper.h | 2 +
target/arm/syndrome.h | 7 +
blockdev.c | 1 -
gdbstub.c | 4 +-
hw/arm/raspi.c | 2 +-
hw/arm/virt.c | 5 -
hw/arm/xlnx-versal.c | 4 +
hw/arm/xlnx-zynqmp.c | 86 ++++++--
hw/core/loader.c | 35 ++-
hw/dma/xlnx-zdma.c | 24 +--
hw/dma/xlnx_csu_dma.c | 31 ++-
hw/i386/pc.c | 1 -
hw/i386/pc_piix.c | 1 -
hw/i386/pc_q35.c | 1 -
hw/mips/jazz.c | 1 -
hw/mips/malta.c | 1 -
hw/ppc/prep.c | 1 -
hw/riscv/sifive_e.c | 1 -
hw/riscv/sifive_u.c | 1 -
hw/riscv/spike.c | 1 -
hw/riscv/virt.c | 1 -
linux-user/arm/signal.c | 2 -
monitor/qmp-cmds.c | 3 +-
net/net.c | 2 +
softmmu/arch_init.c | 66 ------
softmmu/physmem.c | 5 +-
softmmu/qdev-monitor.c | 9 +
softmmu/vl.c | 6 +-
stubs/arch_type.c | 4 -
target/arm/cpu.c | 23 ++
target/arm/cpu64.c | 118 +++++------
target/arm/helper.c | 40 +++-
target/arm/kvm64.c | 2 +-
target/arm/op_helper.c | 16 ++
target/arm/translate.c | 12 ++
target/ppc/cpu_init.c | 1 -
target/s390x/cpu-sysemu.c | 1 -
tests/qtest/ipmi-bt-test.c | 2 +-
tests/tcg/multiarch/linux-test.c | 4 +-
MAINTAINERS | 5 +
hw/arm/Kconfig | 2 -
stubs/meson.build | 1 -
57 files changed, 949 insertions(+), 707 deletions(-)
create mode 100644 docs/specs/acpi_cpu_hotplug.rst
delete mode 100644 docs/specs/acpi_cpu_hotplug.txt
create mode 100644 docs/specs/acpi_mem_hotplug.rst
delete mode 100644 docs/specs/acpi_mem_hotplug.txt
create mode 100644 docs/specs/acpi_nvdimm.rst
delete mode 100644 docs/specs/acpi_nvdimm.txt
rename docs/specs/{acpi_pci_hotplug.txt => acpi_pci_hotplug.rst} (51%)
delete mode 100644 stubs/arch_type.c
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PULL 01/37] hw/arm/xlnx-zynqmp: Realize qspi controller *after* qspi_dma
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 02/37] hw/dma/xlnx_csu_dma: Run trivial checks early in realize() Peter Maydell
` (36 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
From: Philippe Mathieu-Daudé <philmd@redhat.com>
If we link QOM object (a) as a property of QOM object (b),
we must set the property *before* (b) is realized.
Move QSPI realization *after* QSPI DMA.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210819163422.2863447-2-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/xlnx-zynqmp.c | 42 ++++++++++++++++++++----------------------
1 file changed, 20 insertions(+), 22 deletions(-)
diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index 3597e8db4de..9724978761b 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -570,26 +570,6 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
g_free(bus_name);
}
- if (!sysbus_realize(SYS_BUS_DEVICE(&s->qspi), errp)) {
- return;
- }
- sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi), 0, QSPI_ADDR);
- sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi), 1, LQSPI_ADDR);
- sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi), 0, gic_spi[QSPI_IRQ]);
-
- for (i = 0; i < XLNX_ZYNQMP_NUM_QSPI_BUS; i++) {
- gchar *bus_name;
- gchar *target_bus;
-
- /* Alias controller SPI bus to the SoC itself */
- bus_name = g_strdup_printf("qspi%d", i);
- target_bus = g_strdup_printf("spi%d", i);
- object_property_add_alias(OBJECT(s), bus_name,
- OBJECT(&s->qspi), target_bus);
- g_free(bus_name);
- g_free(target_bus);
- }
-
if (!sysbus_realize(SYS_BUS_DEVICE(&s->dp), errp)) {
return;
}
@@ -646,8 +626,26 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi_dma), 0, QSPI_DMA_ADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi_dma), 0, gic_spi[QSPI_IRQ]);
- object_property_set_link(OBJECT(&s->qspi), "stream-connected-dma",
- OBJECT(&s->qspi_dma), errp);
+
+ if (!object_property_set_link(OBJECT(&s->qspi), "stream-connected-dma",
+ OBJECT(&s->qspi_dma), errp)) {
+ return;
+ }
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->qspi), errp)) {
+ return;
+ }
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi), 0, QSPI_ADDR);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi), 1, LQSPI_ADDR);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi), 0, gic_spi[QSPI_IRQ]);
+
+ for (i = 0; i < XLNX_ZYNQMP_NUM_QSPI_BUS; i++) {
+ g_autofree gchar *bus_name = g_strdup_printf("qspi%d", i);
+ g_autofree gchar *target_bus = g_strdup_printf("spi%d", i);
+
+ /* Alias controller SPI bus to the SoC itself */
+ object_property_add_alias(OBJECT(s), bus_name,
+ OBJECT(&s->qspi), target_bus);
+ }
}
static Property xlnx_zynqmp_props[] = {
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 02/37] hw/dma/xlnx_csu_dma: Run trivial checks early in realize()
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
2021-08-26 17:02 ` [PULL 01/37] hw/arm/xlnx-zynqmp: Realize qspi controller *after* qspi_dma Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 03/37] hw/dma/xlnx_csu_dma: Always expect 'dma' link property to be set Peter Maydell
` (35 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
From: Philippe Mathieu-Daudé <philmd@redhat.com>
If some property are not set, we'll return indicating a failure,
so it is pointless to allocate / initialize some fields too early.
Move the trivial checks earlier in realize().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210819163422.2863447-3-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/dma/xlnx_csu_dma.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/hw/dma/xlnx_csu_dma.c b/hw/dma/xlnx_csu_dma.c
index 797b4fed8f5..2d19f415ef3 100644
--- a/hw/dma/xlnx_csu_dma.c
+++ b/hw/dma/xlnx_csu_dma.c
@@ -626,6 +626,11 @@ static void xlnx_csu_dma_realize(DeviceState *dev, Error **errp)
XlnxCSUDMA *s = XLNX_CSU_DMA(dev);
RegisterInfoArray *reg_array;
+ if (!s->is_dst && !s->tx_dev) {
+ error_setg(errp, "zynqmp.csu-dma: Stream not connected");
+ return;
+ }
+
reg_array =
register_init_block32(dev, xlnx_csu_dma_regs_info[!!s->is_dst],
XLNX_CSU_DMA_R_MAX,
@@ -640,11 +645,6 @@ static void xlnx_csu_dma_realize(DeviceState *dev, Error **errp)
sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem);
sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
- if (!s->is_dst && !s->tx_dev) {
- error_setg(errp, "zynqmp.csu-dma: Stream not connected");
- return;
- }
-
s->src_timer = ptimer_init(xlnx_csu_dma_src_timeout_hit,
s, PTIMER_POLICY_DEFAULT);
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 03/37] hw/dma/xlnx_csu_dma: Always expect 'dma' link property to be set
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
2021-08-26 17:02 ` [PULL 01/37] hw/arm/xlnx-zynqmp: Realize qspi controller *after* qspi_dma Peter Maydell
2021-08-26 17:02 ` [PULL 02/37] hw/dma/xlnx_csu_dma: Run trivial checks early in realize() Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 04/37] hw/dma/xlnx-zdma " Peter Maydell
` (34 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
From: Philippe Mathieu-Daudé <philmd@redhat.com>
Simplify by always passing a MemoryRegion property to the device.
Doing so we can move the AddressSpace field to the device struct,
removing need for heap allocation.
Update the Xilinx ZynqMP SoC model to pass the default system
memory instead of a NULL value.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210819163422.2863447-4-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/dma/xlnx_csu_dma.h | 2 +-
hw/arm/xlnx-zynqmp.c | 4 ++++
hw/dma/xlnx_csu_dma.c | 21 ++++++++++-----------
3 files changed, 15 insertions(+), 12 deletions(-)
diff --git a/include/hw/dma/xlnx_csu_dma.h b/include/hw/dma/xlnx_csu_dma.h
index 204d94c6737..9e9dc551e99 100644
--- a/include/hw/dma/xlnx_csu_dma.h
+++ b/include/hw/dma/xlnx_csu_dma.h
@@ -30,7 +30,7 @@ typedef struct XlnxCSUDMA {
MemoryRegion iomem;
MemTxAttrs attr;
MemoryRegion *dma_mr;
- AddressSpace *dma_as;
+ AddressSpace dma_as;
qemu_irq irq;
StreamSink *tx_dev; /* Used as generic StreamSink */
ptimer_state *src_timer;
diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index 9724978761b..4344e223f2d 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -620,6 +620,10 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
gic_spi[adma_ch_intr[i]]);
}
+ if (!object_property_set_link(OBJECT(&s->qspi_dma), "dma",
+ OBJECT(system_memory), errp)) {
+ return;
+ }
if (!sysbus_realize(SYS_BUS_DEVICE(&s->qspi_dma), errp)) {
return;
}
diff --git a/hw/dma/xlnx_csu_dma.c b/hw/dma/xlnx_csu_dma.c
index 2d19f415ef3..896bb3574dd 100644
--- a/hw/dma/xlnx_csu_dma.c
+++ b/hw/dma/xlnx_csu_dma.c
@@ -201,11 +201,11 @@ static uint32_t xlnx_csu_dma_read(XlnxCSUDMA *s, uint8_t *buf, uint32_t len)
for (i = 0; i < len && (result == MEMTX_OK); i += s->width) {
uint32_t mlen = MIN(len - i, s->width);
- result = address_space_rw(s->dma_as, addr, s->attr,
+ result = address_space_rw(&s->dma_as, addr, s->attr,
buf + i, mlen, false);
}
} else {
- result = address_space_rw(s->dma_as, addr, s->attr, buf, len, false);
+ result = address_space_rw(&s->dma_as, addr, s->attr, buf, len, false);
}
if (result == MEMTX_OK) {
@@ -232,12 +232,12 @@ static uint32_t xlnx_csu_dma_write(XlnxCSUDMA *s, uint8_t *buf, uint32_t len)
for (i = 0; i < len && (result == MEMTX_OK); i += s->width) {
uint32_t mlen = MIN(len - i, s->width);
- result = address_space_rw(s->dma_as, addr, s->attr,
+ result = address_space_rw(&s->dma_as, addr, s->attr,
buf, mlen, true);
buf += mlen;
}
} else {
- result = address_space_rw(s->dma_as, addr, s->attr, buf, len, true);
+ result = address_space_rw(&s->dma_as, addr, s->attr, buf, len, true);
}
if (result != MEMTX_OK) {
@@ -631,6 +631,12 @@ static void xlnx_csu_dma_realize(DeviceState *dev, Error **errp)
return;
}
+ if (!s->dma_mr) {
+ error_setg(errp, TYPE_XLNX_CSU_DMA " 'dma' link not set");
+ return;
+ }
+ address_space_init(&s->dma_as, s->dma_mr, "csu-dma");
+
reg_array =
register_init_block32(dev, xlnx_csu_dma_regs_info[!!s->is_dst],
XLNX_CSU_DMA_R_MAX,
@@ -648,13 +654,6 @@ static void xlnx_csu_dma_realize(DeviceState *dev, Error **errp)
s->src_timer = ptimer_init(xlnx_csu_dma_src_timeout_hit,
s, PTIMER_POLICY_DEFAULT);
- if (s->dma_mr) {
- s->dma_as = g_malloc0(sizeof(AddressSpace));
- address_space_init(s->dma_as, s->dma_mr, NULL);
- } else {
- s->dma_as = &address_space_memory;
- }
-
s->attr = MEMTXATTRS_UNSPECIFIED;
s->r_size_last_word = 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 04/37] hw/dma/xlnx-zdma Always expect 'dma' link property to be set
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (2 preceding siblings ...)
2021-08-26 17:02 ` [PULL 03/37] hw/dma/xlnx_csu_dma: Always expect 'dma' link property to be set Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 05/37] hw/arm/Kconfig: no need to enable ACPI_MEMORY_HOTPLUG/ACPI_NVDIMM explicitly Peter Maydell
` (33 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
From: Philippe Mathieu-Daudé <philmd@redhat.com>
Simplify by always passing a MemoryRegion property to the device.
Doing so we can move the AddressSpace field to the device struct,
removing need for heap allocation.
Update the Xilinx ZynqMP / Versal SoC models to pass the default
system memory instead of a NULL value.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210819163422.2863447-5-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/dma/xlnx-zdma.h | 2 +-
hw/arm/xlnx-versal.c | 2 ++
hw/arm/xlnx-zynqmp.c | 8 ++++++++
hw/dma/xlnx-zdma.c | 24 ++++++++++++------------
4 files changed, 23 insertions(+), 13 deletions(-)
diff --git a/include/hw/dma/xlnx-zdma.h b/include/hw/dma/xlnx-zdma.h
index 6602e7ffa72..efc75217d59 100644
--- a/include/hw/dma/xlnx-zdma.h
+++ b/include/hw/dma/xlnx-zdma.h
@@ -56,7 +56,7 @@ struct XlnxZDMA {
MemoryRegion iomem;
MemTxAttrs attr;
MemoryRegion *dma_mr;
- AddressSpace *dma_as;
+ AddressSpace dma_as;
qemu_irq irq_zdma_ch_imr;
struct {
diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c
index fb776834f7e..d60eb4fb184 100644
--- a/hw/arm/xlnx-versal.c
+++ b/hw/arm/xlnx-versal.c
@@ -218,6 +218,8 @@ static void versal_create_admas(Versal *s, qemu_irq *pic)
TYPE_XLNX_ZDMA);
dev = DEVICE(&s->lpd.iou.adma[i]);
object_property_set_int(OBJECT(dev), "bus-width", 128, &error_abort);
+ object_property_set_link(OBJECT(dev), "dma",
+ OBJECT(get_system_memory()), &error_fatal);
sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index 4344e223f2d..6cfce26210d 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -601,6 +601,10 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
errp)) {
return;
}
+ if (!object_property_set_link(OBJECT(&s->gdma[i]), "dma",
+ OBJECT(system_memory), errp)) {
+ return;
+ }
if (!sysbus_realize(SYS_BUS_DEVICE(&s->gdma[i]), errp)) {
return;
}
@@ -611,6 +615,10 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
}
for (i = 0; i < XLNX_ZYNQMP_NUM_ADMA_CH; i++) {
+ if (!object_property_set_link(OBJECT(&s->adma[i]), "dma",
+ OBJECT(system_memory), errp)) {
+ return;
+ }
if (!sysbus_realize(SYS_BUS_DEVICE(&s->adma[i]), errp)) {
return;
}
diff --git a/hw/dma/xlnx-zdma.c b/hw/dma/xlnx-zdma.c
index fa38a556341..a5a92b4ff8c 100644
--- a/hw/dma/xlnx-zdma.c
+++ b/hw/dma/xlnx-zdma.c
@@ -320,9 +320,9 @@ static bool zdma_load_descriptor(XlnxZDMA *s, uint64_t addr,
return false;
}
- descr->addr = address_space_ldq_le(s->dma_as, addr, s->attr, NULL);
- descr->size = address_space_ldl_le(s->dma_as, addr + 8, s->attr, NULL);
- descr->attr = address_space_ldl_le(s->dma_as, addr + 12, s->attr, NULL);
+ descr->addr = address_space_ldq_le(&s->dma_as, addr, s->attr, NULL);
+ descr->size = address_space_ldl_le(&s->dma_as, addr + 8, s->attr, NULL);
+ descr->attr = address_space_ldl_le(&s->dma_as, addr + 12, s->attr, NULL);
return true;
}
@@ -354,7 +354,7 @@ static void zdma_update_descr_addr(XlnxZDMA *s, bool type,
} else {
addr = zdma_get_regaddr64(s, basereg);
addr += sizeof(s->dsc_dst);
- next = address_space_ldq_le(s->dma_as, addr, s->attr, NULL);
+ next = address_space_ldq_le(&s->dma_as, addr, s->attr, NULL);
}
zdma_put_regaddr64(s, basereg, next);
@@ -421,7 +421,7 @@ static void zdma_write_dst(XlnxZDMA *s, uint8_t *buf, uint32_t len)
}
}
- address_space_write(s->dma_as, s->dsc_dst.addr, s->attr, buf, dlen);
+ address_space_write(&s->dma_as, s->dsc_dst.addr, s->attr, buf, dlen);
if (burst_type == AXI_BURST_INCR) {
s->dsc_dst.addr += dlen;
}
@@ -497,7 +497,7 @@ static void zdma_process_descr(XlnxZDMA *s)
len = s->cfg.bus_width / 8;
}
} else {
- address_space_read(s->dma_as, src_addr, s->attr, s->buf, len);
+ address_space_read(&s->dma_as, src_addr, s->attr, s->buf, len);
if (burst_type == AXI_BURST_INCR) {
src_addr += len;
}
@@ -765,6 +765,12 @@ static void zdma_realize(DeviceState *dev, Error **errp)
XlnxZDMA *s = XLNX_ZDMA(dev);
unsigned int i;
+ if (!s->dma_mr) {
+ error_setg(errp, TYPE_XLNX_ZDMA " 'dma' link not set");
+ return;
+ }
+ address_space_init(&s->dma_as, s->dma_mr, "zdma-dma");
+
for (i = 0; i < ARRAY_SIZE(zdma_regs_info); ++i) {
RegisterInfo *r = &s->regs_info[zdma_regs_info[i].addr / 4];
@@ -777,12 +783,6 @@ static void zdma_realize(DeviceState *dev, Error **errp)
};
}
- if (s->dma_mr) {
- s->dma_as = g_malloc0(sizeof(AddressSpace));
- address_space_init(s->dma_as, s->dma_mr, NULL);
- } else {
- s->dma_as = &address_space_memory;
- }
s->attr = MEMTXATTRS_UNSPECIFIED;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 05/37] hw/arm/Kconfig: no need to enable ACPI_MEMORY_HOTPLUG/ACPI_NVDIMM explicitly
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (3 preceding siblings ...)
2021-08-26 17:02 ` [PULL 04/37] hw/dma/xlnx-zdma " Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 06/37] target/arm/cpu: Introduce sve_vq_supported bitmap Peter Maydell
` (32 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
From: Ani Sinha <ani@anisinha.ca>
Since commit
36b79e3219d ("hw/acpi/Kconfig: Add missing Kconfig dependencies (build error)"),
ACPI_MEMORY_HOTPLUG and ACPI_NVDIMM is implicitly turned on when
ACPI_HW_REDUCED is selected. ACPI_HW_REDUCED is already enabled. No need to
turn on ACPI_MEMORY_HOTPLUG or ACPI_NVDIMM explicitly. This is a minor cleanup.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210819162637.518507-1-ani@anisinha.ca
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/Kconfig | 2 --
1 file changed, 2 deletions(-)
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 4ba0aca0676..dc050b5c37f 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -25,9 +25,7 @@ config ARM_VIRT
select ACPI_PCI
select MEM_DEVICE
select DIMM
- select ACPI_MEMORY_HOTPLUG
select ACPI_HW_REDUCED
- select ACPI_NVDIMM
select ACPI_APEI
config CHEETAH
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 06/37] target/arm/cpu: Introduce sve_vq_supported bitmap
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (4 preceding siblings ...)
2021-08-26 17:02 ` [PULL 05/37] hw/arm/Kconfig: no need to enable ACPI_MEMORY_HOTPLUG/ACPI_NVDIMM explicitly Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 07/37] target/arm/kvm64: Ensure sve vls map is completely clear Peter Maydell
` (31 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
From: Andrew Jones <drjones@redhat.com>
Allow CPUs that support SVE to specify which SVE vector lengths they
support by setting them in this bitmap. Currently only the 'max' and
'host' CPU types supports SVE and 'host' requires KVM which obtains
its supported bitmap from the host. So, we only need to initialize the
bitmap for 'max' with TCG. And, since 'max' should support all SVE
vector lengths we simply fill the bitmap. Future CPU types may have
less trivial maps though.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823160647.34028-2-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/cpu.h | 4 ++++
target/arm/cpu64.c | 2 ++
2 files changed, 6 insertions(+)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 5cf8996ae3c..1060825c746 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -1020,9 +1020,13 @@ struct ARMCPU {
* While processing properties during initialization, corresponding
* sve_vq_init bits are set for bits in sve_vq_map that have been
* set by properties.
+ *
+ * Bits set in sve_vq_supported represent valid vector lengths for
+ * the CPU type.
*/
DECLARE_BITMAP(sve_vq_map, ARM_MAX_VQ);
DECLARE_BITMAP(sve_vq_init, ARM_MAX_VQ);
+ DECLARE_BITMAP(sve_vq_supported, ARM_MAX_VQ);
/* Generic timer counter frequency, in Hz */
uint64_t gt_cntfrq_hz;
diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index c690318a9b6..eb9318c83b7 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -840,6 +840,8 @@ static void aarch64_max_initfn(Object *obj)
/* Default to PAUTH on, with the architected algorithm. */
qdev_property_add_static(DEVICE(obj), &arm_cpu_pauth_property);
qdev_property_add_static(DEVICE(obj), &arm_cpu_pauth_impdef_property);
+
+ bitmap_fill(cpu->sve_vq_supported, ARM_MAX_VQ);
}
aarch64_add_sve_properties(obj);
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 07/37] target/arm/kvm64: Ensure sve vls map is completely clear
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (5 preceding siblings ...)
2021-08-26 17:02 ` [PULL 06/37] target/arm/cpu: Introduce sve_vq_supported bitmap Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 08/37] target/arm/cpu64: Replace kvm_supported with sve_vq_supported Peter Maydell
` (30 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
From: Andrew Jones <drjones@redhat.com>
bitmap_clear() only clears the given range. While the given
range should be sufficient in this case we might as well be
100% sure all bits are zeroed by using bitmap_zero().
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823160647.34028-3-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/kvm64.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c
index 59982d470d3..e790d6c9a57 100644
--- a/target/arm/kvm64.c
+++ b/target/arm/kvm64.c
@@ -740,7 +740,7 @@ void kvm_arm_sve_get_vls(CPUState *cs, unsigned long *map)
uint32_t vq = 0;
int i, j;
- bitmap_clear(map, 0, ARM_MAX_VQ);
+ bitmap_zero(map, ARM_MAX_VQ);
/*
* KVM ensures all host CPUs support the same set of vector lengths.
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 08/37] target/arm/cpu64: Replace kvm_supported with sve_vq_supported
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (6 preceding siblings ...)
2021-08-26 17:02 ` [PULL 07/37] target/arm/kvm64: Ensure sve vls map is completely clear Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 09/37] target/arm/cpu64: Validate sve vector lengths are supported Peter Maydell
` (29 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
From: Andrew Jones <drjones@redhat.com>
Now that we have an ARMCPU member sve_vq_supported we no longer
need the local kvm_supported bitmap for KVM's supported vector
lengths.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823160647.34028-4-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/cpu64.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index eb9318c83b7..557fd475774 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -265,14 +265,17 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
* any of the above. Finally, if SVE is not disabled, then at least one
* vector length must be enabled.
*/
- DECLARE_BITMAP(kvm_supported, ARM_MAX_VQ);
DECLARE_BITMAP(tmp, ARM_MAX_VQ);
uint32_t vq, max_vq = 0;
- /* Collect the set of vector lengths supported by KVM. */
- bitmap_zero(kvm_supported, ARM_MAX_VQ);
+ /*
+ * CPU models specify a set of supported vector lengths which are
+ * enabled by default. Attempting to enable any vector length not set
+ * in the supported bitmap results in an error. When KVM is enabled we
+ * fetch the supported bitmap from the host.
+ */
if (kvm_enabled() && kvm_arm_sve_supported()) {
- kvm_arm_sve_get_vls(CPU(cpu), kvm_supported);
+ kvm_arm_sve_get_vls(CPU(cpu), cpu->sve_vq_supported);
} else if (kvm_enabled()) {
assert(!cpu_isar_feature(aa64_sve, cpu));
}
@@ -299,7 +302,7 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
* For KVM we have to automatically enable all supported unitialized
* lengths, even when the smaller lengths are not all powers-of-two.
*/
- bitmap_andnot(tmp, kvm_supported, cpu->sve_vq_init, max_vq);
+ bitmap_andnot(tmp, cpu->sve_vq_supported, cpu->sve_vq_init, max_vq);
bitmap_or(cpu->sve_vq_map, cpu->sve_vq_map, tmp, max_vq);
} else {
/* Propagate enabled bits down through required powers-of-two. */
@@ -322,12 +325,12 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
/* Disabling a supported length disables all larger lengths. */
for (vq = 1; vq <= ARM_MAX_VQ; ++vq) {
if (test_bit(vq - 1, cpu->sve_vq_init) &&
- test_bit(vq - 1, kvm_supported)) {
+ test_bit(vq - 1, cpu->sve_vq_supported)) {
break;
}
}
max_vq = vq <= ARM_MAX_VQ ? vq - 1 : ARM_MAX_VQ;
- bitmap_andnot(cpu->sve_vq_map, kvm_supported,
+ bitmap_andnot(cpu->sve_vq_map, cpu->sve_vq_supported,
cpu->sve_vq_init, max_vq);
if (max_vq == 0 || bitmap_empty(cpu->sve_vq_map, max_vq)) {
error_setg(errp, "cannot disable sve%d", vq * 128);
@@ -392,7 +395,7 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
if (kvm_enabled()) {
/* Ensure the set of lengths matches what KVM supports. */
- bitmap_xor(tmp, cpu->sve_vq_map, kvm_supported, max_vq);
+ bitmap_xor(tmp, cpu->sve_vq_map, cpu->sve_vq_supported, max_vq);
if (!bitmap_empty(tmp, max_vq)) {
vq = find_last_bit(tmp, max_vq) + 1;
if (test_bit(vq - 1, cpu->sve_vq_map)) {
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 09/37] target/arm/cpu64: Validate sve vector lengths are supported
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (7 preceding siblings ...)
2021-08-26 17:02 ` [PULL 08/37] target/arm/cpu64: Replace kvm_supported with sve_vq_supported Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 10/37] docs/specs/acpu_cpu_hotplug: Convert to rST Peter Maydell
` (28 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
From: Andrew Jones <drjones@redhat.com>
Future CPU types may specify which vector lengths are supported.
We can apply nearly the same logic to validate those lengths
as we do for KVM's supported vector lengths. We merge the code
where we can, but unfortunately can't completely merge it because
KVM requires all vector lengths, power-of-two or not, smaller than
the maximum enabled length to also be enabled. The architecture
only requires all the power-of-two lengths, though, so TCG will
only enforce that.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823160647.34028-5-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/cpu64.c | 101 ++++++++++++++++++++-------------------------
1 file changed, 45 insertions(+), 56 deletions(-)
diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index 557fd475774..2f0cbddab56 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -329,35 +329,26 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
break;
}
}
- max_vq = vq <= ARM_MAX_VQ ? vq - 1 : ARM_MAX_VQ;
- bitmap_andnot(cpu->sve_vq_map, cpu->sve_vq_supported,
- cpu->sve_vq_init, max_vq);
- if (max_vq == 0 || bitmap_empty(cpu->sve_vq_map, max_vq)) {
- error_setg(errp, "cannot disable sve%d", vq * 128);
- error_append_hint(errp, "Disabling sve%d results in all "
- "vector lengths being disabled.\n",
- vq * 128);
- error_append_hint(errp, "With SVE enabled, at least one "
- "vector length must be enabled.\n");
- return;
- }
} else {
/* Disabling a power-of-two disables all larger lengths. */
- if (test_bit(0, cpu->sve_vq_init)) {
- error_setg(errp, "cannot disable sve128");
- error_append_hint(errp, "Disabling sve128 results in all "
- "vector lengths being disabled.\n");
- error_append_hint(errp, "With SVE enabled, at least one "
- "vector length must be enabled.\n");
- return;
- }
- for (vq = 2; vq <= ARM_MAX_VQ; vq <<= 1) {
+ for (vq = 1; vq <= ARM_MAX_VQ; vq <<= 1) {
if (test_bit(vq - 1, cpu->sve_vq_init)) {
break;
}
}
- max_vq = vq <= ARM_MAX_VQ ? vq - 1 : ARM_MAX_VQ;
- bitmap_complement(cpu->sve_vq_map, cpu->sve_vq_init, max_vq);
+ }
+
+ max_vq = vq <= ARM_MAX_VQ ? vq - 1 : ARM_MAX_VQ;
+ bitmap_andnot(cpu->sve_vq_map, cpu->sve_vq_supported,
+ cpu->sve_vq_init, max_vq);
+ if (max_vq == 0 || bitmap_empty(cpu->sve_vq_map, max_vq)) {
+ error_setg(errp, "cannot disable sve%d", vq * 128);
+ error_append_hint(errp, "Disabling sve%d results in all "
+ "vector lengths being disabled.\n",
+ vq * 128);
+ error_append_hint(errp, "With SVE enabled, at least one "
+ "vector length must be enabled.\n");
+ return;
}
max_vq = find_last_bit(cpu->sve_vq_map, max_vq) + 1;
@@ -393,46 +384,44 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
assert(max_vq != 0);
bitmap_clear(cpu->sve_vq_map, max_vq, ARM_MAX_VQ - max_vq);
- if (kvm_enabled()) {
- /* Ensure the set of lengths matches what KVM supports. */
- bitmap_xor(tmp, cpu->sve_vq_map, cpu->sve_vq_supported, max_vq);
- if (!bitmap_empty(tmp, max_vq)) {
- vq = find_last_bit(tmp, max_vq) + 1;
- if (test_bit(vq - 1, cpu->sve_vq_map)) {
- if (cpu->sve_max_vq) {
- error_setg(errp, "cannot set sve-max-vq=%d",
- cpu->sve_max_vq);
- error_append_hint(errp, "This KVM host does not support "
- "the vector length %d-bits.\n",
- vq * 128);
- error_append_hint(errp, "It may not be possible to use "
- "sve-max-vq with this KVM host. Try "
- "using only sve<N> properties.\n");
- } else {
- error_setg(errp, "cannot enable sve%d", vq * 128);
- error_append_hint(errp, "This KVM host does not support "
- "the vector length %d-bits.\n",
- vq * 128);
- }
+ /* Ensure the set of lengths matches what is supported. */
+ bitmap_xor(tmp, cpu->sve_vq_map, cpu->sve_vq_supported, max_vq);
+ if (!bitmap_empty(tmp, max_vq)) {
+ vq = find_last_bit(tmp, max_vq) + 1;
+ if (test_bit(vq - 1, cpu->sve_vq_map)) {
+ if (cpu->sve_max_vq) {
+ error_setg(errp, "cannot set sve-max-vq=%d", cpu->sve_max_vq);
+ error_append_hint(errp, "This CPU does not support "
+ "the vector length %d-bits.\n", vq * 128);
+ error_append_hint(errp, "It may not be possible to use "
+ "sve-max-vq with this CPU. Try "
+ "using only sve<N> properties.\n");
} else {
+ error_setg(errp, "cannot enable sve%d", vq * 128);
+ error_append_hint(errp, "This CPU does not support "
+ "the vector length %d-bits.\n", vq * 128);
+ }
+ return;
+ } else {
+ if (kvm_enabled()) {
error_setg(errp, "cannot disable sve%d", vq * 128);
error_append_hint(errp, "The KVM host requires all "
"supported vector lengths smaller "
"than %d bits to also be enabled.\n",
max_vq * 128);
- }
- return;
- }
- } else {
- /* Ensure all required powers-of-two are enabled. */
- for (vq = pow2floor(max_vq); vq >= 1; vq >>= 1) {
- if (!test_bit(vq - 1, cpu->sve_vq_map)) {
- error_setg(errp, "cannot disable sve%d", vq * 128);
- error_append_hint(errp, "sve%d is required as it "
- "is a power-of-two length smaller than "
- "the maximum, sve%d\n",
- vq * 128, max_vq * 128);
return;
+ } else {
+ /* Ensure all required powers-of-two are enabled. */
+ for (vq = pow2floor(max_vq); vq >= 1; vq >>= 1) {
+ if (!test_bit(vq - 1, cpu->sve_vq_map)) {
+ error_setg(errp, "cannot disable sve%d", vq * 128);
+ error_append_hint(errp, "sve%d is required as it "
+ "is a power-of-two length smaller "
+ "than the maximum, sve%d\n",
+ vq * 128, max_vq * 128);
+ return;
+ }
+ }
}
}
}
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 10/37] docs/specs/acpu_cpu_hotplug: Convert to rST
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (8 preceding siblings ...)
2021-08-26 17:02 ` [PULL 09/37] target/arm/cpu64: Validate sve vector lengths are supported Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 11/37] docs/specs/acpi_mem_hotplug: " Peter Maydell
` (27 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
Do a basic conversion of the acpi_cpu_hotplug spec document to rST.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210727170414.3368-2-peter.maydell@linaro.org
---
docs/specs/acpi_cpu_hotplug.rst | 235 ++++++++++++++++++++++++++++++++
docs/specs/acpi_cpu_hotplug.txt | 160 ----------------------
docs/specs/index.rst | 1 +
3 files changed, 236 insertions(+), 160 deletions(-)
create mode 100644 docs/specs/acpi_cpu_hotplug.rst
delete mode 100644 docs/specs/acpi_cpu_hotplug.txt
diff --git a/docs/specs/acpi_cpu_hotplug.rst b/docs/specs/acpi_cpu_hotplug.rst
new file mode 100644
index 00000000000..351057c9676
--- /dev/null
+++ b/docs/specs/acpi_cpu_hotplug.rst
@@ -0,0 +1,235 @@
+QEMU<->ACPI BIOS CPU hotplug interface
+======================================
+
+QEMU supports CPU hotplug via ACPI. This document
+describes the interface between QEMU and the ACPI BIOS.
+
+ACPI BIOS GPE.2 handler is dedicated for notifying OS about CPU hot-add
+and hot-remove events.
+
+
+Legacy ACPI CPU hotplug interface registers
+-------------------------------------------
+
+CPU present bitmap for:
+
+- ICH9-LPC (IO port 0x0cd8-0xcf7, 1-byte access)
+- PIIX-PM (IO port 0xaf00-0xaf1f, 1-byte access)
+- One bit per CPU. Bit position reflects corresponding CPU APIC ID. Read-only.
+- The first DWORD in bitmap is used in write mode to switch from legacy
+ to modern CPU hotplug interface, write 0 into it to do switch.
+
+QEMU sets corresponding CPU bit on hot-add event and issues SCI
+with GPE.2 event set. CPU present map is read by ACPI BIOS GPE.2 handler
+to notify OS about CPU hot-add events. CPU hot-remove isn't supported.
+
+
+Modern ACPI CPU hotplug interface registers
+-------------------------------------------
+
+Register block base address:
+
+- ICH9-LPC IO port 0x0cd8
+- PIIX-PM IO port 0xaf00
+
+Register block size:
+
+- ACPI_CPU_HOTPLUG_REG_LEN = 12
+
+All accesses to registers described below, imply little-endian byte order.
+
+Reserved registers behavior:
+
+- write accesses are ignored
+- read accesses return all bits set to 0.
+
+The last stored value in 'CPU selector' must refer to a possible CPU, otherwise
+
+- reads from any register return 0
+- writes to any other register are ignored until valid value is stored into it
+
+On QEMU start, 'CPU selector' is initialized to a valid value, on reset it
+keeps the current value.
+
+Read access behavior
+^^^^^^^^^^^^^^^^^^^^
+
+offset [0x0-0x3]
+ Command data 2: (DWORD access)
+
+ If value last stored in 'Command field' is:
+
+ 0:
+ reads as 0x0
+ 3:
+ upper 32 bits of architecture specific CPU ID value
+ other values:
+ reserved
+
+offset [0x4]
+ CPU device status fields: (1 byte access)
+
+ bits:
+
+ 0:
+ Device is enabled and may be used by guest
+ 1:
+ Device insert event, used to distinguish device for which
+ no device check event to OSPM was issued.
+ It's valid only when bit 0 is set.
+ 2:
+ Device remove event, used to distinguish device for which
+ no device eject request to OSPM was issued. Firmware must
+ ignore this bit.
+ 3:
+ reserved and should be ignored by OSPM
+ 4:
+ if set to 1, OSPM requests firmware to perform device eject.
+ 5-7:
+ reserved and should be ignored by OSPM
+
+offset [0x5-0x7]
+ reserved
+
+offset [0x8]
+ Command data: (DWORD access)
+
+ If value last stored in 'Command field' is one of:
+
+ 0:
+ contains 'CPU selector' value of a CPU with pending event[s]
+ 3:
+ lower 32 bits of architecture specific CPU ID value
+ (in x86 case: APIC ID)
+ otherwise:
+ contains 0
+
+Write access behavior
+^^^^^^^^^^^^^^^^^^^^^
+
+offset [0x0-0x3]
+ CPU selector: (DWORD access)
+
+ Selects active CPU device. All following accesses to other
+ registers will read/store data from/to selected CPU.
+ Valid values: [0 .. max_cpus)
+
+offset [0x4]
+ CPU device control fields: (1 byte access)
+
+ bits:
+
+ 0:
+ reserved, OSPM must clear it before writing to register.
+ 1:
+ if set to 1 clears device insert event, set by OSPM
+ after it has emitted device check event for the
+ selected CPU device
+ 2:
+ if set to 1 clears device remove event, set by OSPM
+ after it has emitted device eject request for the
+ selected CPU device.
+ 3:
+ if set to 1 initiates device eject, set by OSPM when it
+ triggers CPU device removal and calls _EJ0 method or by firmware
+ when bit #4 is set. In case bit #4 were set, it's cleared as
+ part of device eject.
+ 4:
+ if set to 1, OSPM hands over device eject to firmware.
+ Firmware shall issue device eject request as described above
+ (bit #3) and OSPM should not touch device eject bit (#3) in case
+ it's asked firmware to perform CPU device eject.
+ 5-7:
+ reserved, OSPM must clear them before writing to register
+
+offset[0x5]
+ Command field: (1 byte access)
+
+ value:
+
+ 0:
+ selects a CPU device with inserting/removing events and
+ following reads from 'Command data' register return
+ selected CPU ('CPU selector' value).
+ If no CPU with events found, the current 'CPU selector' doesn't
+ change and corresponding insert/remove event flags are not modified.
+
+ 1:
+ following writes to 'Command data' register set OST event
+ register in QEMU
+ 2:
+ following writes to 'Command data' register set OST status
+ register in QEMU
+ 3:
+ following reads from 'Command data' and 'Command data 2' return
+ architecture specific CPU ID value for currently selected CPU.
+ other values:
+ reserved
+
+offset [0x6-0x7]
+ reserved
+
+offset [0x8]
+ Command data: (DWORD access)
+
+ If last stored 'Command field' value is:
+
+ 1:
+ stores value into OST event register
+ 2:
+ stores value into OST status register, triggers
+ ACPI_DEVICE_OST QMP event from QEMU to external applications
+ with current values of OST event and status registers.
+ other values:
+ reserved
+
+Typical usecases
+----------------
+
+(x86) Detecting and enabling modern CPU hotplug interface
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+QEMU starts with legacy CPU hotplug interface enabled. Detecting and
+switching to modern interface is based on the 2 legacy CPU hotplug features:
+
+#. Writes into CPU bitmap are ignored.
+#. CPU bitmap always has bit #0 set, corresponding to boot CPU.
+
+Use following steps to detect and enable modern CPU hotplug interface:
+
+#. Store 0x0 to the 'CPU selector' register, attempting to switch to modern mode
+#. Store 0x0 to the 'CPU selector' register, to ensure valid selector value
+#. Store 0x0 to the 'Command field' register
+#. Read the 'Command data 2' register.
+ If read value is 0x0, the modern interface is enabled.
+ Otherwise legacy or no CPU hotplug interface available
+
+Get a cpu with pending event
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+#. Store 0x0 to the 'CPU selector' register.
+#. Store 0x0 to the 'Command field' register.
+#. Read the 'CPU device status fields' register.
+#. If both bit #1 and bit #2 are clear in the value read, there is no CPU
+ with a pending event and selected CPU remains unchanged.
+#. Otherwise, read the 'Command data' register. The value read is the
+ selector of the CPU with the pending event (which is already selected).
+
+Enumerate CPUs present/non present CPUs
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+#. Set the present CPU count to 0.
+#. Set the iterator to 0.
+#. Store 0x0 to the 'CPU selector' register, to ensure that it's in
+ a valid state and that access to other registers won't be ignored.
+#. Store 0x0 to the 'Command field' register to make 'Command data'
+ register return 'CPU selector' value of selected CPU
+#. Read the 'CPU device status fields' register.
+#. If bit #0 is set, increment the present CPU count.
+#. Increment the iterator.
+#. Store the iterator to the 'CPU selector' register.
+#. Read the 'Command data' register.
+#. If the value read is not zero, goto 05.
+#. Otherwise store 0x0 to the 'CPU selector' register, to put it
+ into a valid state and exit.
+ The iterator at this point equals "max_cpus".
diff --git a/docs/specs/acpi_cpu_hotplug.txt b/docs/specs/acpi_cpu_hotplug.txt
deleted file mode 100644
index 9bd59ae0dae..00000000000
--- a/docs/specs/acpi_cpu_hotplug.txt
+++ /dev/null
@@ -1,160 +0,0 @@
-QEMU<->ACPI BIOS CPU hotplug interface
---------------------------------------
-
-QEMU supports CPU hotplug via ACPI. This document
-describes the interface between QEMU and the ACPI BIOS.
-
-ACPI BIOS GPE.2 handler is dedicated for notifying OS about CPU hot-add
-and hot-remove events.
-
-============================================
-Legacy ACPI CPU hotplug interface registers:
---------------------------------------------
-CPU present bitmap for:
- ICH9-LPC (IO port 0x0cd8-0xcf7, 1-byte access)
- PIIX-PM (IO port 0xaf00-0xaf1f, 1-byte access)
- One bit per CPU. Bit position reflects corresponding CPU APIC ID. Read-only.
- The first DWORD in bitmap is used in write mode to switch from legacy
- to modern CPU hotplug interface, write 0 into it to do switch.
----------------------------------------------------------------
-QEMU sets corresponding CPU bit on hot-add event and issues SCI
-with GPE.2 event set. CPU present map is read by ACPI BIOS GPE.2 handler
-to notify OS about CPU hot-add events. CPU hot-remove isn't supported.
-
-=====================================
-Modern ACPI CPU hotplug interface registers:
--------------------------------------
-Register block base address:
- ICH9-LPC IO port 0x0cd8
- PIIX-PM IO port 0xaf00
-Register block size:
- ACPI_CPU_HOTPLUG_REG_LEN = 12
-
-All accesses to registers described below, imply little-endian byte order.
-
-Reserved resisters behavior:
- - write accesses are ignored
- - read accesses return all bits set to 0.
-
-The last stored value in 'CPU selector' must refer to a possible CPU, otherwise
- - reads from any register return 0
- - writes to any other register are ignored until valid value is stored into it
-On QEMU start, 'CPU selector' is initialized to a valid value, on reset it
-keeps the current value.
-
-read access:
- offset:
- [0x0-0x3] Command data 2: (DWORD access)
- if value last stored in 'Command field':
- 0: reads as 0x0
- 3: upper 32 bits of architecture specific CPU ID value
- other values: reserved
- [0x4] CPU device status fields: (1 byte access)
- bits:
- 0: Device is enabled and may be used by guest
- 1: Device insert event, used to distinguish device for which
- no device check event to OSPM was issued.
- It's valid only when bit 0 is set.
- 2: Device remove event, used to distinguish device for which
- no device eject request to OSPM was issued. Firmware must
- ignore this bit.
- 3: reserved and should be ignored by OSPM
- 4: if set to 1, OSPM requests firmware to perform device eject.
- 5-7: reserved and should be ignored by OSPM
- [0x5-0x7] reserved
- [0x8] Command data: (DWORD access)
- contains 0 unless value last stored in 'Command field' is one of:
- 0: contains 'CPU selector' value of a CPU with pending event[s]
- 3: lower 32 bits of architecture specific CPU ID value
- (in x86 case: APIC ID)
-
-write access:
- offset:
- [0x0-0x3] CPU selector: (DWORD access)
- selects active CPU device. All following accesses to other
- registers will read/store data from/to selected CPU.
- Valid values: [0 .. max_cpus)
- [0x4] CPU device control fields: (1 byte access)
- bits:
- 0: reserved, OSPM must clear it before writing to register.
- 1: if set to 1 clears device insert event, set by OSPM
- after it has emitted device check event for the
- selected CPU device
- 2: if set to 1 clears device remove event, set by OSPM
- after it has emitted device eject request for the
- selected CPU device.
- 3: if set to 1 initiates device eject, set by OSPM when it
- triggers CPU device removal and calls _EJ0 method or by firmware
- when bit #4 is set. In case bit #4 were set, it's cleared as
- part of device eject.
- 4: if set to 1, OSPM hands over device eject to firmware.
- Firmware shall issue device eject request as described above
- (bit #3) and OSPM should not touch device eject bit (#3) in case
- it's asked firmware to perform CPU device eject.
- 5-7: reserved, OSPM must clear them before writing to register
- [0x5] Command field: (1 byte access)
- value:
- 0: selects a CPU device with inserting/removing events and
- following reads from 'Command data' register return
- selected CPU ('CPU selector' value).
- If no CPU with events found, the current 'CPU selector' doesn't
- change and corresponding insert/remove event flags are not modified.
- 1: following writes to 'Command data' register set OST event
- register in QEMU
- 2: following writes to 'Command data' register set OST status
- register in QEMU
- 3: following reads from 'Command data' and 'Command data 2' return
- architecture specific CPU ID value for currently selected CPU.
- other values: reserved
- [0x6-0x7] reserved
- [0x8] Command data: (DWORD access)
- if last stored 'Command field' value:
- 1: stores value into OST event register
- 2: stores value into OST status register, triggers
- ACPI_DEVICE_OST QMP event from QEMU to external applications
- with current values of OST event and status registers.
- other values: reserved
-
-Typical usecases:
- - (x86) Detecting and enabling modern CPU hotplug interface.
- QEMU starts with legacy CPU hotplug interface enabled. Detecting and
- switching to modern interface is based on the 2 legacy CPU hotplug features:
- 1. Writes into CPU bitmap are ignored.
- 2. CPU bitmap always has bit#0 set, corresponding to boot CPU.
-
- Use following steps to detect and enable modern CPU hotplug interface:
- 1. Store 0x0 to the 'CPU selector' register,
- attempting to switch to modern mode
- 2. Store 0x0 to the 'CPU selector' register,
- to ensure valid selector value
- 3. Store 0x0 to the 'Command field' register,
- 4. Read the 'Command data 2' register.
- If read value is 0x0, the modern interface is enabled.
- Otherwise legacy or no CPU hotplug interface available
-
- - Get a cpu with pending event
- 1. Store 0x0 to the 'CPU selector' register.
- 2. Store 0x0 to the 'Command field' register.
- 3. Read the 'CPU device status fields' register.
- 4. If both bit#1 and bit#2 are clear in the value read, there is no CPU
- with a pending event and selected CPU remains unchanged.
- 5. Otherwise, read the 'Command data' register. The value read is the
- selector of the CPU with the pending event (which is already
- selected).
-
- - Enumerate CPUs present/non present CPUs
- 01. Set the present CPU count to 0.
- 02. Set the iterator to 0.
- 03. Store 0x0 to the 'CPU selector' register, to ensure that it's in
- a valid state and that access to other registers won't be ignored.
- 04. Store 0x0 to the 'Command field' register to make 'Command data'
- register return 'CPU selector' value of selected CPU
- 05. Read the 'CPU device status fields' register.
- 06. If bit#0 is set, increment the present CPU count.
- 07. Increment the iterator.
- 08. Store the iterator to the 'CPU selector' register.
- 09. Read the 'Command data' register.
- 10. If the value read is not zero, goto 05.
- 11. Otherwise store 0x0 to the 'CPU selector' register, to put it
- into a valid state and exit.
- The iterator at this point equals "max_cpus".
diff --git a/docs/specs/index.rst b/docs/specs/index.rst
index b7b08ea30d7..24b765e1a45 100644
--- a/docs/specs/index.rst
+++ b/docs/specs/index.rst
@@ -13,3 +13,4 @@ guest hardware that is specific to QEMU.
acpi_hw_reduced_hotplug
tpm
acpi_hest_ghes
+ acpi_cpu_hotplug
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 11/37] docs/specs/acpi_mem_hotplug: Convert to rST
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (9 preceding siblings ...)
2021-08-26 17:02 ` [PULL 10/37] docs/specs/acpu_cpu_hotplug: Convert to rST Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 12/37] docs/specs/acpi_pci_hotplug: " Peter Maydell
` (26 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
Convert the acpi memory hotplug spec to rST.
Note that this includes converting a lot of weird whitespace
characters to plain old spaces (the rST parser does not like
whatever the old ones were).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210727170414.3368-3-peter.maydell@linaro.org
---
docs/specs/acpi_mem_hotplug.rst | 128 ++++++++++++++++++++++++++++++++
docs/specs/acpi_mem_hotplug.txt | 94 -----------------------
docs/specs/index.rst | 1 +
3 files changed, 129 insertions(+), 94 deletions(-)
create mode 100644 docs/specs/acpi_mem_hotplug.rst
delete mode 100644 docs/specs/acpi_mem_hotplug.txt
diff --git a/docs/specs/acpi_mem_hotplug.rst b/docs/specs/acpi_mem_hotplug.rst
new file mode 100644
index 00000000000..069819bc3e0
--- /dev/null
+++ b/docs/specs/acpi_mem_hotplug.rst
@@ -0,0 +1,128 @@
+QEMU<->ACPI BIOS memory hotplug interface
+=========================================
+
+ACPI BIOS GPE.3 handler is dedicated for notifying OS about memory hot-add
+and hot-remove events.
+
+Memory hot-plug interface (IO port 0xa00-0xa17, 1-4 byte access)
+----------------------------------------------------------------
+
+Read access behavior
+^^^^^^^^^^^^^^^^^^^^
+
+[0x0-0x3]
+ Lo part of memory device phys address
+[0x4-0x7]
+ Hi part of memory device phys address
+[0x8-0xb]
+ Lo part of memory device size in bytes
+[0xc-0xf]
+ Hi part of memory device size in bytes
+[0x10-0x13]
+ Memory device proximity domain
+[0x14]
+ Memory device status fields
+
+ bits:
+
+ 0:
+ Device is enabled and may be used by guest
+ 1:
+ Device insert event, used to distinguish device for which
+ no device check event to OSPM was issued.
+ It's valid only when bit 1 is set.
+ 2:
+ Device remove event, used to distinguish device for which
+ no device eject request to OSPM was issued.
+ 3-7:
+ reserved and should be ignored by OSPM
+
+[0x15-0x17]
+ reserved
+
+Write access behavior
+^^^^^^^^^^^^^^^^^^^^^
+
+
+[0x0-0x3]
+ Memory device slot selector, selects active memory device.
+ All following accesses to other registers in 0xa00-0xa17
+ region will read/store data from/to selected memory device.
+[0x4-0x7]
+ OST event code reported by OSPM
+[0x8-0xb]
+ OST status code reported by OSPM
+[0xc-0x13]
+ reserved, writes into it are ignored
+[0x14]
+ Memory device control fields
+
+ bits:
+
+ 0:
+ reserved, OSPM must clear it before writing to register.
+ Due to BUG in versions prior 2.4 that field isn't cleared
+ when other fields are written. Keep it reserved and don't
+ try to reuse it.
+ 1:
+ if set to 1 clears device insert event, set by OSPM
+ after it has emitted device check event for the
+ selected memory device
+ 2:
+ if set to 1 clears device remove event, set by OSPM
+ after it has emitted device eject request for the
+ selected memory device
+ 3:
+ if set to 1 initiates device eject, set by OSPM when it
+ triggers memory device removal and calls _EJ0 method
+ 4-7:
+ reserved, OSPM must clear them before writing to register
+
+Selecting memory device slot beyond present range has no effect on platform:
+
+- write accesses to memory hot-plug registers not documented above are ignored
+- read accesses to memory hot-plug registers not documented above return
+ all bits set to 1.
+
+Memory hot remove process diagram
+---------------------------------
+
+::
+
+ +-------------+ +-----------------------+ +------------------+
+ | 1. QEMU | | 2. QEMU | |3. QEMU |
+ | device_del +---->+ device unplug request +----->+Send SCI to guest,|
+ | | | cb | |return control to |
+ | | | | |management |
+ +-------------+ +-----------------------+ +------------------+
+
+ +---------------------------------------------------------------------+
+
+ +---------------------+ +-------------------------+
+ | OSPM: | remove event | OSPM: |
+ | send Eject Request, | | Scan memory devices |
+ | clear remove event +<-------------+ for event flags |
+ | | | |
+ +---------------------+ +-------------------------+
+ |
+ |
+ +---------v--------+ +-----------------------+
+ | Guest OS: | success | OSPM: |
+ | process Ejection +----------->+ Execute _EJ0 method, |
+ | request | | set eject bit in flags|
+ +------------------+ +-----------------------+
+ |failure |
+ v v
+ +------------------------+ +-----------------------+
+ | OSPM: | | QEMU: |
+ | set OST event & status | | call device unplug cb |
+ | fields | | |
+ +------------------------+ +-----------------------+
+ | |
+ v v
+ +------------------+ +-------------------+
+ |QEMU: | |QEMU: |
+ |Send OST QMP event| |Send device deleted|
+ | | |QMP event |
+ +------------------+ | |
+ +-------------------+
diff --git a/docs/specs/acpi_mem_hotplug.txt b/docs/specs/acpi_mem_hotplug.txt
deleted file mode 100644
index 3df3620ce42..00000000000
--- a/docs/specs/acpi_mem_hotplug.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-QEMU<->ACPI BIOS memory hotplug interface
---------------------------------------
-
-ACPI BIOS GPE.3 handler is dedicated for notifying OS about memory hot-add
-and hot-remove events.
-
-Memory hot-plug interface (IO port 0xa00-0xa17, 1-4 byte access):
----------------------------------------------------------------
-0xa00:
- read access:
- [0x0-0x3] Lo part of memory device phys address
- [0x4-0x7] Hi part of memory device phys address
- [0x8-0xb] Lo part of memory device size in bytes
- [0xc-0xf] Hi part of memory device size in bytes
- [0x10-0x13] Memory device proximity domain
- [0x14] Memory device status fields
- bits:
- 0: Device is enabled and may be used by guest
- 1: Device insert event, used to distinguish device for which
- no device check event to OSPM was issued.
- It's valid only when bit 1 is set.
- 2: Device remove event, used to distinguish device for which
- no device eject request to OSPM was issued.
- 3-7: reserved and should be ignored by OSPM
- [0x15-0x17] reserved
-
- write access:
- [0x0-0x3] Memory device slot selector, selects active memory device.
- All following accesses to other registers in 0xa00-0xa17
- region will read/store data from/to selected memory device.
- [0x4-0x7] OST event code reported by OSPM
- [0x8-0xb] OST status code reported by OSPM
- [0xc-0x13] reserved, writes into it are ignored
- [0x14] Memory device control fields
- bits:
- 0: reserved, OSPM must clear it before writing to register.
- Due to BUG in versions prior 2.4 that field isn't cleared
- when other fields are written. Keep it reserved and don't
- try to reuse it.
- 1: if set to 1 clears device insert event, set by OSPM
- after it has emitted device check event for the
- selected memory device
- 2: if set to 1 clears device remove event, set by OSPM
- after it has emitted device eject request for the
- selected memory device
- 3: if set to 1 initiates device eject, set by OSPM when it
- triggers memory device removal and calls _EJ0 method
- 4-7: reserved, OSPM must clear them before writing to register
-
-Selecting memory device slot beyond present range has no effect on platform:
- - write accesses to memory hot-plug registers not documented above are
- ignored
- - read accesses to memory hot-plug registers not documented above return
- all bits set to 1.
-
-Memory hot remove process diagram:
-----------------------------------
- +-------------+ +-----------------------+ +------------------+
- | 1. QEMU | | 2. QEMU | |3. QEMU |
- | device_del +---->+ device unplug request +----->+Send SCI to guest,|
- | | | cb | |return control to |
- +-------------+ +-----------------------+ |management |
- +------------------+
-
- +---------------------------------------------------------------------+
-
- +---------------------+ +-------------------------+
- | OSPM: | remove event | OSPM: |
- | send Eject Request, | | Scan memory devices |
- | clear remove event +<-------------+ for event flags |
- | | | |
- +---------------------+ +-------------------------+
- |
- |
- +---------v--------+ +-----------------------+
- | Guest OS: | success | OSPM: |
- | process Ejection +----------->+ Execute _EJ0 method, |
- | request | | set eject bit in flags|
- +------------------+ +-----------------------+
- |failure |
- v v
- +------------------------+ +-----------------------+
- | OSPM: | | QEMU: |
- | set OST event & status | | call device unplug cb |
- | fields | | |
- +------------------------+ +-----------------------+
- | |
- v v
- +------------------+ +-------------------+
- |QEMU: | |QEMU: |
- |Send OST QMP event| |Send device deleted|
- | | |QMP event |
- +------------------+ | |
- +-------------------+
diff --git a/docs/specs/index.rst b/docs/specs/index.rst
index 24b765e1a45..17cc7868b91 100644
--- a/docs/specs/index.rst
+++ b/docs/specs/index.rst
@@ -14,3 +14,4 @@ guest hardware that is specific to QEMU.
tpm
acpi_hest_ghes
acpi_cpu_hotplug
+ acpi_mem_hotplug
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 12/37] docs/specs/acpi_pci_hotplug: Convert to rST
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (10 preceding siblings ...)
2021-08-26 17:02 ` [PULL 11/37] docs/specs/acpi_mem_hotplug: " Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 13/37] docs/specs/acpi_nvdimm: " Peter Maydell
` (25 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
Convert the PCI hotplug spec document to rST.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
---
...i_pci_hotplug.txt => acpi_pci_hotplug.rst} | 37 ++++++++++---------
docs/specs/index.rst | 1 +
2 files changed, 21 insertions(+), 17 deletions(-)
rename docs/specs/{acpi_pci_hotplug.txt => acpi_pci_hotplug.rst} (51%)
diff --git a/docs/specs/acpi_pci_hotplug.txt b/docs/specs/acpi_pci_hotplug.rst
similarity index 51%
rename from docs/specs/acpi_pci_hotplug.txt
rename to docs/specs/acpi_pci_hotplug.rst
index a839434f313..685bc5c322f 100644
--- a/docs/specs/acpi_pci_hotplug.txt
+++ b/docs/specs/acpi_pci_hotplug.rst
@@ -1,45 +1,48 @@
QEMU<->ACPI BIOS PCI hotplug interface
---------------------------------------
+======================================
QEMU supports PCI hotplug via ACPI, for PCI bus 0. This document
describes the interface between QEMU and the ACPI BIOS.
-ACPI GPE block (IO ports 0xafe0-0xafe3, byte access):
------------------------------------------
+ACPI GPE block (IO ports 0xafe0-0xafe3, byte access)
+----------------------------------------------------
Generic ACPI GPE block. Bit 1 (GPE.1) used to notify PCI hotplug/eject
event to ACPI BIOS, via SCI interrupt.
-PCI slot injection notification pending (IO port 0xae00-0xae03, 4-byte access):
----------------------------------------------------------------
+PCI slot injection notification pending (IO port 0xae00-0xae03, 4-byte access)
+------------------------------------------------------------------------------
+
Slot injection notification pending. One bit per slot.
Read by ACPI BIOS GPE.1 handler to notify OS of injection
events. Read-only.
-PCI slot removal notification (IO port 0xae04-0xae07, 4-byte access):
------------------------------------------------------
+PCI slot removal notification (IO port 0xae04-0xae07, 4-byte access)
+--------------------------------------------------------------------
+
Slot removal notification pending. One bit per slot.
Read by ACPI BIOS GPE.1 handler to notify OS of removal
events. Read-only.
-PCI device eject (IO port 0xae08-0xae0b, 4-byte access):
-----------------------------------------
+PCI device eject (IO port 0xae08-0xae0b, 4-byte access)
+-------------------------------------------------------
Write: Used by ACPI BIOS _EJ0 method to request device removal.
One bit per slot.
Read: Hotplug features register. Used by platform to identify features
available. Current base feature set (no bits set):
- - Read-only "up" register @0xae00, 4-byte access, bit per slot
- - Read-only "down" register @0xae04, 4-byte access, bit per slot
- - Read/write "eject" register @0xae08, 4-byte access,
- write: bit per slot eject, read: hotplug feature set
- - Read-only hotplug capable register @0xae0c, 4-byte access, bit per slot
-PCI removability status (IO port 0xae0c-0xae0f, 4-byte access):
------------------------------------------------
+- Read-only "up" register @0xae00, 4-byte access, bit per slot
+- Read-only "down" register @0xae04, 4-byte access, bit per slot
+- Read/write "eject" register @0xae08, 4-byte access,
+ write: bit per slot eject, read: hotplug feature set
+- Read-only hotplug capable register @0xae0c, 4-byte access, bit per slot
+
+PCI removability status (IO port 0xae0c-0xae0f, 4-byte access)
+--------------------------------------------------------------
Used by ACPI BIOS _RMV method to indicate removability status to OS. One
-bit per slot. Read-only
+bit per slot. Read-only.
diff --git a/docs/specs/index.rst b/docs/specs/index.rst
index 17cc7868b91..8296fb19b72 100644
--- a/docs/specs/index.rst
+++ b/docs/specs/index.rst
@@ -15,3 +15,4 @@ guest hardware that is specific to QEMU.
acpi_hest_ghes
acpi_cpu_hotplug
acpi_mem_hotplug
+ acpi_pci_hotplug
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 13/37] docs/specs/acpi_nvdimm: Convert to rST
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (11 preceding siblings ...)
2021-08-26 17:02 ` [PULL 12/37] docs/specs/acpi_pci_hotplug: " Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 14/37] MAINTAINERS: Add ACPI specs documents to ACPI and NVDIMM sections Peter Maydell
` (24 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
Convert the ACPI NVDIMM spec document to rST.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210727170414.3368-5-peter.maydell@linaro.org
---
docs/specs/acpi_nvdimm.rst | 228 +++++++++++++++++++++++++++++++++++++
docs/specs/acpi_nvdimm.txt | 188 ------------------------------
docs/specs/index.rst | 1 +
3 files changed, 229 insertions(+), 188 deletions(-)
create mode 100644 docs/specs/acpi_nvdimm.rst
delete mode 100644 docs/specs/acpi_nvdimm.txt
diff --git a/docs/specs/acpi_nvdimm.rst b/docs/specs/acpi_nvdimm.rst
new file mode 100644
index 00000000000..ab0335253d7
--- /dev/null
+++ b/docs/specs/acpi_nvdimm.rst
@@ -0,0 +1,228 @@
+QEMU<->ACPI BIOS NVDIMM interface
+=================================
+
+QEMU supports NVDIMM via ACPI. This document describes the basic concepts of
+NVDIMM ACPI and the interface between QEMU and the ACPI BIOS.
+
+NVDIMM ACPI Background
+----------------------
+
+NVDIMM is introduced in ACPI 6.0 which defines an NVDIMM root device under
+_SB scope with a _HID of "ACPI0012". For each NVDIMM present or intended
+to be supported by platform, platform firmware also exposes an ACPI
+Namespace Device under the root device.
+
+The NVDIMM child devices under the NVDIMM root device are defined with _ADR
+corresponding to the NFIT device handle. The NVDIMM root device and the
+NVDIMM devices can have device specific methods (_DSM) to provide additional
+functions specific to a particular NVDIMM implementation.
+
+This is an example from ACPI 6.0, a platform contains one NVDIMM::
+
+ Scope (\_SB){
+ Device (NVDR) // Root device
+ {
+ Name (_HID, "ACPI0012")
+ Method (_STA) {...}
+ Method (_FIT) {...}
+ Method (_DSM, ...) {...}
+ Device (NVD)
+ {
+ Name(_ADR, h) //where h is NFIT Device Handle for this NVDIMM
+ Method (_DSM, ...) {...}
+ }
+ }
+ }
+
+Methods supported on both NVDIMM root device and NVDIMM device
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+_DSM (Device Specific Method)
+ It is a control method that enables devices to provide device specific
+ control functions that are consumed by the device driver.
+ The NVDIMM DSM specification can be found at
+ http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
+
+ Arguments:
+
+ Arg0
+ A Buffer containing a UUID (16 Bytes)
+ Arg1
+ An Integer containing the Revision ID (4 Bytes)
+ Arg2
+ An Integer containing the Function Index (4 Bytes)
+ Arg3
+ A package containing parameters for the function specified by the
+ UUID, Revision ID, and Function Index
+
+ Return Value:
+
+ If Function Index = 0, a Buffer containing a function index bitfield.
+ Otherwise, the return value and type depends on the UUID, revision ID
+ and function index which are described in the DSM specification.
+
+Methods on NVDIMM ROOT Device
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+_FIT(Firmware Interface Table)
+ It evaluates to a buffer returning data in the format of a series of NFIT
+ Type Structure.
+
+ Arguments: None
+
+ Return Value:
+ A Buffer containing a list of NFIT Type structure entries.
+
+ The detailed definition of the structure can be found at ACPI 6.0: 5.2.25
+ NVDIMM Firmware Interface Table (NFIT).
+
+QEMU NVDIMM Implementation
+--------------------------
+
+QEMU uses 4 bytes IO Port starting from 0x0a18 and a RAM-based memory page
+for NVDIMM ACPI.
+
+Memory:
+ QEMU uses BIOS Linker/loader feature to ask BIOS to allocate a memory
+ page and dynamically patch its address into an int32 object named "MEMA"
+ in ACPI.
+
+ This page is RAM-based and it is used to transfer data between _DSM
+ method and QEMU. If ACPI has control, this pages is owned by ACPI which
+ writes _DSM input data to it, otherwise, it is owned by QEMU which
+ emulates _DSM access and writes the output data to it.
+
+ ACPI writes _DSM Input Data (based on the offset in the page):
+
+ [0x0 - 0x3]
+ 4 bytes, NVDIMM Device Handle.
+
+ The handle is completely QEMU internal thing, the values in
+ range [1, 0xFFFF] indicate nvdimm device. Other values are
+ reserved for other purposes.
+
+ Reserved handles:
+
+ - 0 is reserved for nvdimm root device named NVDR.
+ - 0x10000 is reserved for QEMU internal DSM function called on
+ the root device.
+
+ [0x4 - 0x7]
+ 4 bytes, Revision ID, that is the Arg1 of _DSM method.
+
+ [0x8 - 0xB]
+ 4 bytes. Function Index, that is the Arg2 of _DSM method.
+
+ [0xC - 0xFFF]
+ 4084 bytes, the Arg3 of _DSM method.
+
+ QEMU writes Output Data (based on the offset in the page):
+
+ [0x0 - 0x3]
+ 4 bytes, the length of result
+
+ [0x4 - 0xFFF]
+ 4092 bytes, the DSM result filled by QEMU
+
+IO Port 0x0a18 - 0xa1b:
+ ACPI writes the address of the memory page allocated by BIOS to this
+ port then QEMU gets the control and fills the result in the memory page.
+
+ Write Access:
+
+ [0x0a18 - 0xa1b]
+ 4 bytes, the address of the memory page allocated by BIOS.
+
+_DSM process diagram
+--------------------
+
+"MEMA" indicates the address of memory page allocated by BIOS.
+
+::
+
+ +----------------------+ +-----------------------+
+ | 1. OSPM | | 2. OSPM |
+ | save _DSM input data | | write "MEMA" to | Exit to QEMU
+ | to the page +----->| IO port 0x0a18 +------------+
+ | indicated by "MEMA" | | | |
+ +----------------------+ +-----------------------+ |
+ |
+ v
+ +--------------------+ +-----------+ +------------------+--------+
+ | 5 QEMU | | 4 QEMU | | 3. QEMU |
+ | write _DSM result | | emulate | | get _DSM input data from |
+ | to the page +<------+ _DSM +<-----+ the page indicated by the |
+ | | | | | value from the IO port |
+ +--------+-----------+ +-----------+ +---------------------------+
+ |
+ | Enter Guest
+ |
+ v
+ +--------------------------+ +--------------+
+ | 6 OSPM | | 7 OSPM |
+ | result size is returned | | _DSM return |
+ | by reading DSM +----->+ |
+ | result from the page | | |
+ +--------------------------+ +--------------+
+
+NVDIMM hotplug
+--------------
+
+ACPI BIOS GPE.4 handler is dedicated for notifying OS about nvdimm device
+hot-add event.
+
+QEMU internal use only _DSM functions
+-------------------------------------
+
+Read FIT
+^^^^^^^^
+
+_FIT method uses _DSM method to fetch NFIT structures blob from QEMU
+in 1 page sized increments which are then concatenated and returned
+as _FIT method result.
+
+Input parameters:
+
+Arg0
+ UUID {set to 648B9CF2-CDA1-4312-8AD9-49C4AF32BD62}
+Arg1
+ Revision ID (set to 1)
+Arg2
+ Function Index, 0x1
+Arg3
+ A package containing a buffer whose layout is as follows:
+
+ +----------+--------+--------+-------------------------------------------+
+ | Field | Length | Offset | Description |
+ +----------+--------+--------+-------------------------------------------+
+ | offset | 4 | 0 | offset in QEMU's NFIT structures blob to |
+ | | | | read from |
+ +----------+--------+--------+-------------------------------------------+
+
+Output layout in the dsm memory page:
+
+ +----------+--------+--------+-------------------------------------------+
+ | Field | Length | Offset | Description |
+ +----------+--------+--------+-------------------------------------------+
+ | length | 4 | 0 | length of entire returned data |
+ | | | | (including this header) |
+ +----------+--------+--------+-------------------------------------------+
+ | | | | return status codes |
+ | | | | |
+ | | | | - 0x0 - success |
+ | | | | - 0x100 - error caused by NFIT update |
+ | status | 4 | 4 | while read by _FIT wasn't completed |
+ | | | | - other codes follow Chapter 3 in |
+ | | | | DSM Spec Rev1 |
+ +----------+--------+--------+-------------------------------------------+
+ | fit data | Varies | 8 | contains FIT data. This field is present |
+ | | | | if status field is 0. |
+ +----------+--------+--------+-------------------------------------------+
+
+The FIT offset is maintained by the OSPM itself, current offset plus
+the size of the fit data returned by the function is the next offset
+OSPM should read. When all FIT data has been read out, zero fit data
+size is returned.
+
+If it returns status code 0x100, OSPM should restart to read FIT (read
+from offset 0 again).
diff --git a/docs/specs/acpi_nvdimm.txt b/docs/specs/acpi_nvdimm.txt
deleted file mode 100644
index 3ec42ecbce4..00000000000
--- a/docs/specs/acpi_nvdimm.txt
+++ /dev/null
@@ -1,188 +0,0 @@
-QEMU<->ACPI BIOS NVDIMM interface
----------------------------------
-
-QEMU supports NVDIMM via ACPI. This document describes the basic concepts of
-NVDIMM ACPI and the interface between QEMU and the ACPI BIOS.
-
-NVDIMM ACPI Background
-----------------------
-NVDIMM is introduced in ACPI 6.0 which defines an NVDIMM root device under
-_SB scope with a _HID of “ACPI0012”. For each NVDIMM present or intended
-to be supported by platform, platform firmware also exposes an ACPI
-Namespace Device under the root device.
-
-The NVDIMM child devices under the NVDIMM root device are defined with _ADR
-corresponding to the NFIT device handle. The NVDIMM root device and the
-NVDIMM devices can have device specific methods (_DSM) to provide additional
-functions specific to a particular NVDIMM implementation.
-
-This is an example from ACPI 6.0, a platform contains one NVDIMM:
-
-Scope (\_SB){
- Device (NVDR) // Root device
- {
- Name (_HID, “ACPI0012”)
- Method (_STA) {...}
- Method (_FIT) {...}
- Method (_DSM, ...) {...}
- Device (NVD)
- {
- Name(_ADR, h) //where h is NFIT Device Handle for this NVDIMM
- Method (_DSM, ...) {...}
- }
- }
-}
-
-Method supported on both NVDIMM root device and NVDIMM device
-_DSM (Device Specific Method)
- It is a control method that enables devices to provide device specific
- control functions that are consumed by the device driver.
- The NVDIMM DSM specification can be found at:
- http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
-
- Arguments:
- Arg0 – A Buffer containing a UUID (16 Bytes)
- Arg1 – An Integer containing the Revision ID (4 Bytes)
- Arg2 – An Integer containing the Function Index (4 Bytes)
- Arg3 – A package containing parameters for the function specified by the
- UUID, Revision ID, and Function Index
-
- Return Value:
- If Function Index = 0, a Buffer containing a function index bitfield.
- Otherwise, the return value and type depends on the UUID, revision ID
- and function index which are described in the DSM specification.
-
-Methods on NVDIMM ROOT Device
-_FIT(Firmware Interface Table)
- It evaluates to a buffer returning data in the format of a series of NFIT
- Type Structure.
-
- Arguments: None
-
- Return Value:
- A Buffer containing a list of NFIT Type structure entries.
-
- The detailed definition of the structure can be found at ACPI 6.0: 5.2.25
- NVDIMM Firmware Interface Table (NFIT).
-
-QEMU NVDIMM Implementation
-==========================
-QEMU uses 4 bytes IO Port starting from 0x0a18 and a RAM-based memory page
-for NVDIMM ACPI.
-
-Memory:
- QEMU uses BIOS Linker/loader feature to ask BIOS to allocate a memory
- page and dynamically patch its address into an int32 object named "MEMA"
- in ACPI.
-
- This page is RAM-based and it is used to transfer data between _DSM
- method and QEMU. If ACPI has control, this pages is owned by ACPI which
- writes _DSM input data to it, otherwise, it is owned by QEMU which
- emulates _DSM access and writes the output data to it.
-
- ACPI writes _DSM Input Data (based on the offset in the page):
- [0x0 - 0x3]: 4 bytes, NVDIMM Device Handle.
-
- The handle is completely QEMU internal thing, the values in
- range [1, 0xFFFF] indicate nvdimm device. Other values are
- reserved for other purposes.
-
- Reserved handles:
- 0 is reserved for nvdimm root device named NVDR.
- 0x10000 is reserved for QEMU internal DSM function called on
- the root device.
-
- [0x4 - 0x7]: 4 bytes, Revision ID, that is the Arg1 of _DSM method.
- [0x8 - 0xB]: 4 bytes. Function Index, that is the Arg2 of _DSM method.
- [0xC - 0xFFF]: 4084 bytes, the Arg3 of _DSM method.
-
- QEMU Writes Output Data (based on the offset in the page):
- [0x0 - 0x3]: 4 bytes, the length of result
- [0x4 - 0xFFF]: 4092 bytes, the DSM result filled by QEMU
-
-IO Port 0x0a18 - 0xa1b:
- ACPI writes the address of the memory page allocated by BIOS to this
- port then QEMU gets the control and fills the result in the memory page.
-
- write Access:
- [0x0a18 - 0xa1b]: 4 bytes, the address of the memory page allocated
- by BIOS.
-
-_DSM process diagram:
----------------------
-"MEMA" indicates the address of memory page allocated by BIOS.
-
- +----------------------+ +-----------------------+
- | 1. OSPM | | 2. OSPM |
- | save _DSM input data | | write "MEMA" to | Exit to QEMU
- | to the page +----->| IO port 0x0a18 +------------+
- | indicated by "MEMA" | | | |
- +----------------------+ +-----------------------+ |
- |
- v
- +------------- ----+ +-----------+ +------------------+--------+
- | 5 QEMU | | 4 QEMU | | 3. QEMU |
- | write _DSM result | | emulate | | get _DSM input data from |
- | to the page +<------+ _DSM +<-----+ the page indicated by the |
- | | | | | value from the IO port |
- +--------+-----------+ +-----------+ +---------------------------+
- |
- | Enter Guest
- |
- v
- +--------------------------+ +--------------+
- | 6 OSPM | | 7 OSPM |
- | result size is returned | | _DSM return |
- | by reading DSM +----->+ |
- | result from the page | | |
- +--------------------------+ +--------------+
-
-NVDIMM hotplug
---------------
-ACPI BIOS GPE.4 handler is dedicated for notifying OS about nvdimm device
-hot-add event.
-
-QEMU internal use only _DSM function
-------------------------------------
-1) Read FIT
- _FIT method uses _DSM method to fetch NFIT structures blob from QEMU
- in 1 page sized increments which are then concatenated and returned
- as _FIT method result.
-
- Input parameters:
- Arg0 – UUID {set to 648B9CF2-CDA1-4312-8AD9-49C4AF32BD62}
- Arg1 – Revision ID (set to 1)
- Arg2 - Function Index, 0x1
- Arg3 - A package containing a buffer whose layout is as follows:
-
- +----------+--------+--------+-------------------------------------------+
- | Field | Length | Offset | Description |
- +----------+--------+--------+-------------------------------------------+
- | offset | 4 | 0 | offset in QEMU's NFIT structures blob to |
- | | | | read from |
- +----------+--------+--------+-------------------------------------------+
-
- Output layout in the dsm memory page:
- +----------+--------+--------+-------------------------------------------+
- | Field | Length | Offset | Description |
- +----------+--------+--------+-------------------------------------------+
- | length | 4 | 0 | length of entire returned data |
- | | | | (including this header) |
- +----------+-----------------+-------------------------------------------+
- | | | | return status codes |
- | | | | 0x0 - success |
- | | | | 0x100 - error caused by NFIT update while |
- | status | 4 | 4 | read by _FIT wasn't completed, other |
- | | | | codes follow Chapter 3 in DSM Spec Rev1 |
- +----------+-----------------+-------------------------------------------+
- | fit data | Varies | 8 | contains FIT data, this field is present |
- | | | | if status field is 0; |
- +----------+--------+--------+-------------------------------------------+
-
- The FIT offset is maintained by the OSPM itself, current offset plus
- the size of the fit data returned by the function is the next offset
- OSPM should read. When all FIT data has been read out, zero fit data
- size is returned.
-
- If it returns status code 0x100, OSPM should restart to read FIT (read
- from offset 0 again).
diff --git a/docs/specs/index.rst b/docs/specs/index.rst
index 8296fb19b72..65e9663916a 100644
--- a/docs/specs/index.rst
+++ b/docs/specs/index.rst
@@ -16,3 +16,4 @@ guest hardware that is specific to QEMU.
acpi_cpu_hotplug
acpi_mem_hotplug
acpi_pci_hotplug
+ acpi_nvdimm
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 14/37] MAINTAINERS: Add ACPI specs documents to ACPI and NVDIMM sections
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (12 preceding siblings ...)
2021-08-26 17:02 ` [PULL 13/37] docs/specs/acpi_nvdimm: " Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 15/37] softmmu: Use accel_find("xen") instead of xen_available() Peter Maydell
` (23 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
Add entries for the ACPI specs documents in docs/specs to
appropriate sections of MAINTAINERS.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210727170414.3368-6-peter.maydell@linaro.org
---
MAINTAINERS | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 6b3697962c1..dffcb651f46 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1751,6 +1751,10 @@ F: qapi/acpi.json
F: tests/qtest/bios-tables-test*
F: tests/qtest/acpi-utils.[hc]
F: tests/data/acpi/
+F: docs/specs/acpi_cpu_hotplug.rst
+F: docs/specs/acpi_mem_hotplug.rst
+F: docs/specs/acpi_pci_hotplug.rst
+F: docs/specs/acpi_hw_reduced_hotplug.rst
ACPI/HEST/GHES
R: Dongjiu Geng <gengdongjiu1@gmail.com>
@@ -2057,6 +2061,7 @@ F: hw/acpi/nvdimm.c
F: hw/mem/nvdimm.c
F: include/hw/mem/nvdimm.h
F: docs/nvdimm.txt
+F: docs/specs/acpi_nvdimm.rst
e1000x
M: Dmitry Fleytman <dmitry.fleytman@gmail.com>
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 15/37] softmmu: Use accel_find("xen") instead of xen_available()
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (13 preceding siblings ...)
2021-08-26 17:02 ` [PULL 14/37] MAINTAINERS: Add ACPI specs documents to ACPI and NVDIMM sections Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 16/37] monitor: Use accel_find("kvm") instead of kvm_available() Peter Maydell
` (22 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
The xen_available() function is used only to produce an error
for some Xen-specific command line options in QEMU binaries where
Xen support was not compiled in: it just returns the value of
the CONFIG_XEN define.
Now that accelerators are QOM classes, we can check for
"does this binary have Xen compiled in" with accel_find("xen"),
and drop the xen_available() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730105947.28215-2-peter.maydell@linaro.org
---
include/sysemu/arch_init.h | 1 -
softmmu/arch_init.c | 9 ---------
softmmu/vl.c | 6 +++---
3 files changed, 3 insertions(+), 13 deletions(-)
diff --git a/include/sysemu/arch_init.h b/include/sysemu/arch_init.h
index e723c467eb2..7acfc62418f 100644
--- a/include/sysemu/arch_init.h
+++ b/include/sysemu/arch_init.h
@@ -30,7 +30,6 @@ enum {
extern const uint32_t arch_type;
int kvm_available(void);
-int xen_available(void);
/* default virtio transport per architecture */
#define QEMU_ARCH_VIRTIO_PCI (QEMU_ARCH_ALPHA | QEMU_ARCH_ARM | \
diff --git a/softmmu/arch_init.c b/softmmu/arch_init.c
index 6ff9f30badd..3f4d7c1b1cd 100644
--- a/softmmu/arch_init.c
+++ b/softmmu/arch_init.c
@@ -96,12 +96,3 @@ int kvm_available(void)
return 0;
#endif
}
-
-int xen_available(void)
-{
-#ifdef CONFIG_XEN
- return 1;
-#else
- return 0;
-#endif
-}
diff --git a/softmmu/vl.c b/softmmu/vl.c
index 5ca11e74694..82d574fe4b2 100644
--- a/softmmu/vl.c
+++ b/softmmu/vl.c
@@ -3448,21 +3448,21 @@ void qemu_init(int argc, char **argv, char **envp)
has_defaults = 0;
break;
case QEMU_OPTION_xen_domid:
- if (!(xen_available())) {
+ if (!(accel_find("xen"))) {
error_report("Option not supported for this target");
exit(1);
}
xen_domid = atoi(optarg);
break;
case QEMU_OPTION_xen_attach:
- if (!(xen_available())) {
+ if (!(accel_find("xen"))) {
error_report("Option not supported for this target");
exit(1);
}
xen_mode = XEN_ATTACH;
break;
case QEMU_OPTION_xen_domid_restrict:
- if (!(xen_available())) {
+ if (!(accel_find("xen"))) {
error_report("Option not supported for this target");
exit(1);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 16/37] monitor: Use accel_find("kvm") instead of kvm_available()
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (14 preceding siblings ...)
2021-08-26 17:02 ` [PULL 15/37] softmmu: Use accel_find("xen") instead of xen_available() Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 17/37] softmmu/arch_init.c: Trim down include list Peter Maydell
` (21 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
The kvm_available() function reports whether KVM support was
compiled into the QEMU binary; it returns the value of the
CONFIG_KVM define.
The only place in the codebase where we use this function is
in qmp_query_kvm(). Now that accelerators are based on QOM
classes we can instead use accel_find("kvm") and remove the
kvm_available() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730105947.28215-3-peter.maydell@linaro.org
---
include/sysemu/arch_init.h | 2 --
monitor/qmp-cmds.c | 2 +-
softmmu/arch_init.c | 9 ---------
3 files changed, 1 insertion(+), 12 deletions(-)
diff --git a/include/sysemu/arch_init.h b/include/sysemu/arch_init.h
index 7acfc62418f..57caad1c675 100644
--- a/include/sysemu/arch_init.h
+++ b/include/sysemu/arch_init.h
@@ -29,8 +29,6 @@ enum {
extern const uint32_t arch_type;
-int kvm_available(void);
-
/* default virtio transport per architecture */
#define QEMU_ARCH_VIRTIO_PCI (QEMU_ARCH_ALPHA | QEMU_ARCH_ARM | \
QEMU_ARCH_HPPA | QEMU_ARCH_I386 | \
diff --git a/monitor/qmp-cmds.c b/monitor/qmp-cmds.c
index f7d64a64577..9ddb9352e65 100644
--- a/monitor/qmp-cmds.c
+++ b/monitor/qmp-cmds.c
@@ -58,7 +58,7 @@ KvmInfo *qmp_query_kvm(Error **errp)
KvmInfo *info = g_malloc0(sizeof(*info));
info->enabled = kvm_enabled();
- info->present = kvm_available();
+ info->present = accel_find("kvm");
return info;
}
diff --git a/softmmu/arch_init.c b/softmmu/arch_init.c
index 3f4d7c1b1cd..9011af74e4a 100644
--- a/softmmu/arch_init.c
+++ b/softmmu/arch_init.c
@@ -87,12 +87,3 @@ int graphic_depth = 32;
#endif
const uint32_t arch_type = QEMU_ARCH;
-
-int kvm_available(void)
-{
-#ifdef CONFIG_KVM
- return 1;
-#else
- return 0;
-#endif
-}
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 17/37] softmmu/arch_init.c: Trim down include list
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (15 preceding siblings ...)
2021-08-26 17:02 ` [PULL 16/37] monitor: Use accel_find("kvm") instead of kvm_available() Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 18/37] meson.build: Define QEMU_ARCH in config-target.h Peter Maydell
` (20 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
arch_init.c does very little but has a long list of #include lines.
Remove all the unnecessary ones.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730105947.28215-4-peter.maydell@linaro.org
---
softmmu/arch_init.c | 7 -------
1 file changed, 7 deletions(-)
diff --git a/softmmu/arch_init.c b/softmmu/arch_init.c
index 9011af74e4a..91cbf883e28 100644
--- a/softmmu/arch_init.c
+++ b/softmmu/arch_init.c
@@ -23,13 +23,6 @@
*/
#include "qemu/osdep.h"
#include "sysemu/arch_init.h"
-#include "hw/pci/pci.h"
-#include "hw/audio/soundhw.h"
-#include "qapi/error.h"
-#include "qemu/config-file.h"
-#include "qemu/error-report.h"
-#include "hw/acpi/acpi.h"
-#include "qemu/help_option.h"
#ifdef TARGET_SPARC
int graphic_width = 1024;
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 18/37] meson.build: Define QEMU_ARCH in config-target.h
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (16 preceding siblings ...)
2021-08-26 17:02 ` [PULL 17/37] softmmu/arch_init.c: Trim down include list Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 19/37] arch_init.h: Add QEMU_ARCH_HEXAGON Peter Maydell
` (19 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
Instead of using an ifdef ladder in arch_init.c (which we then have
to manually update every time we add or remove a target
architecture), have meson.build put "#define QEMU_ARCH QEMU_ARCH_FOO"
in the config-target.h file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730105947.28215-5-peter.maydell@linaro.org
---
meson.build | 2 ++
softmmu/arch_init.c | 41 -----------------------------------------
2 files changed, 2 insertions(+), 41 deletions(-)
diff --git a/meson.build b/meson.build
index b3e7ec0e92d..bf637848125 100644
--- a/meson.build
+++ b/meson.build
@@ -1625,6 +1625,8 @@ foreach target : target_dirs
config_target_data.set(k, v)
endif
endforeach
+ config_target_data.set('QEMU_ARCH',
+ 'QEMU_ARCH_' + config_target['TARGET_BASE_ARCH'].to_upper())
config_target_h += {target: configure_file(output: target + '-config-target.h',
configuration: config_target_data)}
diff --git a/softmmu/arch_init.c b/softmmu/arch_init.c
index 91cbf883e28..8919405c7b2 100644
--- a/softmmu/arch_init.c
+++ b/softmmu/arch_init.c
@@ -38,45 +38,4 @@ int graphic_height = 600;
int graphic_depth = 32;
#endif
-
-#if defined(TARGET_ALPHA)
-#define QEMU_ARCH QEMU_ARCH_ALPHA
-#elif defined(TARGET_ARM)
-#define QEMU_ARCH QEMU_ARCH_ARM
-#elif defined(TARGET_CRIS)
-#define QEMU_ARCH QEMU_ARCH_CRIS
-#elif defined(TARGET_HPPA)
-#define QEMU_ARCH QEMU_ARCH_HPPA
-#elif defined(TARGET_I386)
-#define QEMU_ARCH QEMU_ARCH_I386
-#elif defined(TARGET_M68K)
-#define QEMU_ARCH QEMU_ARCH_M68K
-#elif defined(TARGET_MICROBLAZE)
-#define QEMU_ARCH QEMU_ARCH_MICROBLAZE
-#elif defined(TARGET_MIPS)
-#define QEMU_ARCH QEMU_ARCH_MIPS
-#elif defined(TARGET_NIOS2)
-#define QEMU_ARCH QEMU_ARCH_NIOS2
-#elif defined(TARGET_OPENRISC)
-#define QEMU_ARCH QEMU_ARCH_OPENRISC
-#elif defined(TARGET_PPC)
-#define QEMU_ARCH QEMU_ARCH_PPC
-#elif defined(TARGET_RISCV)
-#define QEMU_ARCH QEMU_ARCH_RISCV
-#elif defined(TARGET_RX)
-#define QEMU_ARCH QEMU_ARCH_RX
-#elif defined(TARGET_S390X)
-#define QEMU_ARCH QEMU_ARCH_S390X
-#elif defined(TARGET_SH4)
-#define QEMU_ARCH QEMU_ARCH_SH4
-#elif defined(TARGET_SPARC)
-#define QEMU_ARCH QEMU_ARCH_SPARC
-#elif defined(TARGET_TRICORE)
-#define QEMU_ARCH QEMU_ARCH_TRICORE
-#elif defined(TARGET_XTENSA)
-#define QEMU_ARCH QEMU_ARCH_XTENSA
-#elif defined(TARGET_AVR)
-#define QEMU_ARCH QEMU_ARCH_AVR
-#endif
-
const uint32_t arch_type = QEMU_ARCH;
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 19/37] arch_init.h: Add QEMU_ARCH_HEXAGON
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (17 preceding siblings ...)
2021-08-26 17:02 ` [PULL 18/37] meson.build: Define QEMU_ARCH in config-target.h Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 20/37] arch_init.h: Move QEMU_ARCH_VIRTIO_* to qdev-monitor.c Peter Maydell
` (18 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
When Hexagon was added we forgot to add it to the QEMU_ARCH_*
enumeration. This doesn't cause a visible effect because at the
moment Hexagon is linux-user only and the QEMU_ARCH_* constants are
only used in softmmu, but we might as well add it in, since it's the
only architecture currently missing from the list.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20210730105947.28215-6-peter.maydell@linaro.org
---
include/sysemu/arch_init.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/sysemu/arch_init.h b/include/sysemu/arch_init.h
index 57caad1c675..60270c5ad15 100644
--- a/include/sysemu/arch_init.h
+++ b/include/sysemu/arch_init.h
@@ -23,6 +23,7 @@ enum {
QEMU_ARCH_RISCV = (1 << 19),
QEMU_ARCH_RX = (1 << 20),
QEMU_ARCH_AVR = (1 << 21),
+ QEMU_ARCH_HEXAGON = (1 << 22),
QEMU_ARCH_NONE = (1 << 31),
};
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 20/37] arch_init.h: Move QEMU_ARCH_VIRTIO_* to qdev-monitor.c
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (18 preceding siblings ...)
2021-08-26 17:02 ` [PULL 19/37] arch_init.h: Add QEMU_ARCH_HEXAGON Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 21/37] arch_init.h: Don't include arch_init.h unnecessarily Peter Maydell
` (17 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
The QEMU_ARCH_VIRTIO_* defines are used only in one file,
qdev-monitor.c. Move them to that file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20210730105947.28215-7-peter.maydell@linaro.org
---
include/sysemu/arch_init.h | 9 ---------
softmmu/qdev-monitor.c | 9 +++++++++
2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/include/sysemu/arch_init.h b/include/sysemu/arch_init.h
index 60270c5ad15..e7789399508 100644
--- a/include/sysemu/arch_init.h
+++ b/include/sysemu/arch_init.h
@@ -30,13 +30,4 @@ enum {
extern const uint32_t arch_type;
-/* default virtio transport per architecture */
-#define QEMU_ARCH_VIRTIO_PCI (QEMU_ARCH_ALPHA | QEMU_ARCH_ARM | \
- QEMU_ARCH_HPPA | QEMU_ARCH_I386 | \
- QEMU_ARCH_MIPS | QEMU_ARCH_PPC | \
- QEMU_ARCH_RISCV | QEMU_ARCH_SH4 | \
- QEMU_ARCH_SPARC | QEMU_ARCH_XTENSA)
-#define QEMU_ARCH_VIRTIO_CCW (QEMU_ARCH_S390X)
-#define QEMU_ARCH_VIRTIO_MMIO (QEMU_ARCH_M68K)
-
#endif
diff --git a/softmmu/qdev-monitor.c b/softmmu/qdev-monitor.c
index 721dec2d820..a304754ab91 100644
--- a/softmmu/qdev-monitor.c
+++ b/softmmu/qdev-monitor.c
@@ -52,6 +52,15 @@ typedef struct QDevAlias
uint32_t arch_mask;
} QDevAlias;
+/* default virtio transport per architecture */
+#define QEMU_ARCH_VIRTIO_PCI (QEMU_ARCH_ALPHA | QEMU_ARCH_ARM | \
+ QEMU_ARCH_HPPA | QEMU_ARCH_I386 | \
+ QEMU_ARCH_MIPS | QEMU_ARCH_PPC | \
+ QEMU_ARCH_RISCV | QEMU_ARCH_SH4 | \
+ QEMU_ARCH_SPARC | QEMU_ARCH_XTENSA)
+#define QEMU_ARCH_VIRTIO_CCW (QEMU_ARCH_S390X)
+#define QEMU_ARCH_VIRTIO_MMIO (QEMU_ARCH_M68K)
+
/* Please keep this table sorted by typename. */
static const QDevAlias qdev_alias_table[] = {
{ "AC97", "ac97" }, /* -soundhw name */
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 21/37] arch_init.h: Don't include arch_init.h unnecessarily
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (19 preceding siblings ...)
2021-08-26 17:02 ` [PULL 20/37] arch_init.h: Move QEMU_ARCH_VIRTIO_* to qdev-monitor.c Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 22/37] stubs: Remove unused arch_type.c stub Peter Maydell
` (16 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
arch_init.h only defines the QEMU_ARCH_* enumeration and the
arch_type global. Don't include it in files that don't use those.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210730105947.28215-8-peter.maydell@linaro.org
---
blockdev.c | 1 -
hw/i386/pc.c | 1 -
hw/i386/pc_piix.c | 1 -
hw/i386/pc_q35.c | 1 -
hw/mips/jazz.c | 1 -
hw/mips/malta.c | 1 -
hw/ppc/prep.c | 1 -
hw/riscv/sifive_e.c | 1 -
hw/riscv/sifive_u.c | 1 -
hw/riscv/spike.c | 1 -
hw/riscv/virt.c | 1 -
monitor/qmp-cmds.c | 1 -
target/ppc/cpu_init.c | 1 -
target/s390x/cpu-sysemu.c | 1 -
14 files changed, 14 deletions(-)
diff --git a/blockdev.c b/blockdev.c
index 3d8ac368a19..e79c5f3b5e8 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -56,7 +56,6 @@
#include "sysemu/iothread.h"
#include "block/block_int.h"
#include "block/trace.h"
-#include "sysemu/arch_init.h"
#include "sysemu/runstate.h"
#include "sysemu/replay.h"
#include "qemu/cutils.h"
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index c2b9d62a358..102b2239468 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -65,7 +65,6 @@
#include "hw/xen/start_info.h"
#include "ui/qemu-spice.h"
#include "exec/memory.h"
-#include "sysemu/arch_init.h"
#include "qemu/bitmap.h"
#include "qemu/config-file.h"
#include "qemu/error-report.h"
diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c
index 30b8bd6ea92..1bc30167acc 100644
--- a/hw/i386/pc_piix.c
+++ b/hw/i386/pc_piix.c
@@ -43,7 +43,6 @@
#include "sysemu/kvm.h"
#include "hw/kvm/clock.h"
#include "hw/sysbus.h"
-#include "sysemu/arch_init.h"
#include "hw/i2c/smbus_eeprom.h"
#include "hw/xen/xen-x86.h"
#include "exec/memory.h"
diff --git a/hw/i386/pc_q35.c b/hw/i386/pc_q35.c
index 04b4a4788d7..eeb0b185b11 100644
--- a/hw/i386/pc_q35.c
+++ b/hw/i386/pc_q35.c
@@ -31,7 +31,6 @@
#include "qemu/osdep.h"
#include "qemu/units.h"
#include "hw/loader.h"
-#include "sysemu/arch_init.h"
#include "hw/i2c/smbus_eeprom.h"
#include "hw/rtc/mc146818rtc.h"
#include "sysemu/kvm.h"
diff --git a/hw/mips/jazz.c b/hw/mips/jazz.c
index d6183e18821..f5a26e174d5 100644
--- a/hw/mips/jazz.c
+++ b/hw/mips/jazz.c
@@ -35,7 +35,6 @@
#include "hw/isa/isa.h"
#include "hw/block/fdc.h"
#include "sysemu/sysemu.h"
-#include "sysemu/arch_init.h"
#include "hw/boards.h"
#include "net/net.h"
#include "hw/scsi/esp.h"
diff --git a/hw/mips/malta.c b/hw/mips/malta.c
index 7dcf175d726..b770b8d3671 100644
--- a/hw/mips/malta.c
+++ b/hw/mips/malta.c
@@ -38,7 +38,6 @@
#include "hw/mips/mips.h"
#include "hw/mips/cpudevs.h"
#include "hw/pci/pci.h"
-#include "sysemu/arch_init.h"
#include "qemu/log.h"
#include "hw/mips/bios.h"
#include "hw/ide.h"
diff --git a/hw/ppc/prep.c b/hw/ppc/prep.c
index acfc2a91d8e..25a2e86b421 100644
--- a/hw/ppc/prep.c
+++ b/hw/ppc/prep.c
@@ -40,7 +40,6 @@
#include "hw/rtc/mc146818rtc.h"
#include "hw/isa/pc87312.h"
#include "hw/qdev-properties.h"
-#include "sysemu/arch_init.h"
#include "sysemu/kvm.h"
#include "sysemu/reset.h"
#include "trace.h"
diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c
index ddc658c8d68..5b7b245e1f3 100644
--- a/hw/riscv/sifive_e.c
+++ b/hw/riscv/sifive_e.c
@@ -45,7 +45,6 @@
#include "hw/intc/sifive_plic.h"
#include "hw/misc/sifive_e_prci.h"
#include "chardev/char.h"
-#include "sysemu/arch_init.h"
#include "sysemu/sysemu.h"
static const MemMapEntry sifive_e_memmap[] = {
diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 87bbd10b211..6cc1a62b0f7 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -55,7 +55,6 @@
#include "hw/intc/sifive_plic.h"
#include "chardev/char.h"
#include "net/eth.h"
-#include "sysemu/arch_init.h"
#include "sysemu/device_tree.h"
#include "sysemu/runstate.h"
#include "sysemu/sysemu.h"
diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c
index fead77f0c48..aae36f2cb4d 100644
--- a/hw/riscv/spike.c
+++ b/hw/riscv/spike.c
@@ -37,7 +37,6 @@
#include "hw/char/riscv_htif.h"
#include "hw/intc/sifive_clint.h"
#include "chardev/char.h"
-#include "sysemu/arch_init.h"
#include "sysemu/device_tree.h"
#include "sysemu/sysemu.h"
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 4a3cd2599a5..0e55411045a 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -36,7 +36,6 @@
#include "hw/intc/sifive_plic.h"
#include "hw/misc/sifive_test.h"
#include "chardev/char.h"
-#include "sysemu/arch_init.h"
#include "sysemu/device_tree.h"
#include "sysemu/sysemu.h"
#include "hw/pci/pci.h"
diff --git a/monitor/qmp-cmds.c b/monitor/qmp-cmds.c
index 9ddb9352e65..5c0d5e116b9 100644
--- a/monitor/qmp-cmds.c
+++ b/monitor/qmp-cmds.c
@@ -27,7 +27,6 @@
#include "sysemu/kvm.h"
#include "sysemu/runstate.h"
#include "sysemu/runstate-action.h"
-#include "sysemu/arch_init.h"
#include "sysemu/blockdev.h"
#include "sysemu/block-backend.h"
#include "qapi/error.h"
diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c
index 505a0ed6ac0..319a272d4c9 100644
--- a/target/ppc/cpu_init.c
+++ b/target/ppc/cpu_init.c
@@ -22,7 +22,6 @@
#include "disas/dis-asm.h"
#include "exec/gdbstub.h"
#include "kvm_ppc.h"
-#include "sysemu/arch_init.h"
#include "sysemu/cpus.h"
#include "sysemu/hw_accel.h"
#include "sysemu/tcg.h"
diff --git a/target/s390x/cpu-sysemu.c b/target/s390x/cpu-sysemu.c
index df2c6bf6941..5471e01ee82 100644
--- a/target/s390x/cpu-sysemu.c
+++ b/target/s390x/cpu-sysemu.c
@@ -34,7 +34,6 @@
#include "hw/s390x/pv.h"
#include "hw/boards.h"
-#include "sysemu/arch_init.h"
#include "sysemu/sysemu.h"
#include "sysemu/tcg.h"
#include "hw/core/sysemu-cpu-ops.h"
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 22/37] stubs: Remove unused arch_type.c stub
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (20 preceding siblings ...)
2021-08-26 17:02 ` [PULL 21/37] arch_init.h: Don't include arch_init.h unnecessarily Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 23/37] hw/core/loader: In gunzip(), check index is in range before use, not after Peter Maydell
` (15 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
We added a stub for the arch_type global in commit 5964ed56d9a1 so
that we could compile blockdev.c into the tools. However, in commit
9db1d3a2be9bf we removed the only use of arch_type from blockdev.c.
The stub is therefore no longer needed, and we can delete it again,
together with the QEMU_ARCH_NONE value that only the stub was using.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730105947.28215-9-peter.maydell@linaro.org
---
include/sysemu/arch_init.h | 2 --
stubs/arch_type.c | 4 ----
stubs/meson.build | 1 -
3 files changed, 7 deletions(-)
delete mode 100644 stubs/arch_type.c
diff --git a/include/sysemu/arch_init.h b/include/sysemu/arch_init.h
index e7789399508..70c579560ad 100644
--- a/include/sysemu/arch_init.h
+++ b/include/sysemu/arch_init.h
@@ -24,8 +24,6 @@ enum {
QEMU_ARCH_RX = (1 << 20),
QEMU_ARCH_AVR = (1 << 21),
QEMU_ARCH_HEXAGON = (1 << 22),
-
- QEMU_ARCH_NONE = (1 << 31),
};
extern const uint32_t arch_type;
diff --git a/stubs/arch_type.c b/stubs/arch_type.c
deleted file mode 100644
index fc5423bc98a..00000000000
--- a/stubs/arch_type.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "qemu/osdep.h"
-#include "sysemu/arch_init.h"
-
-const uint32_t arch_type = QEMU_ARCH_NONE;
diff --git a/stubs/meson.build b/stubs/meson.build
index d3fa8646b38..717bfa9a999 100644
--- a/stubs/meson.build
+++ b/stubs/meson.build
@@ -1,4 +1,3 @@
-stub_ss.add(files('arch_type.c'))
stub_ss.add(files('bdrv-next-monitor-owned.c'))
stub_ss.add(files('blk-commit-all.c'))
stub_ss.add(files('blk-exp-close-all.c'))
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 23/37] hw/core/loader: In gunzip(), check index is in range before use, not after
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (21 preceding siblings ...)
2021-08-26 17:02 ` [PULL 22/37] stubs: Remove unused arch_type.c stub Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 24/37] softmmu/physmem.c: Remove unneeded NULL check in qemu_ram_alloc_from_fd() Peter Maydell
` (14 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
The gunzip() function reads various fields from a passed in source
buffer in order to skip a header before passing the actual compressed
data to the zlib inflate() function. It does check whether the
passed in buffer is too small, but unfortunately it checks that only
after reading bytes from the src buffer, so it could read off the end
of the buffer.
You can see this with valgrind:
$ printf "%b" '\x1f\x8b' > /tmp/image
$ valgrind qemu-system-aarch64 -display none -M virt -cpu max -kernel /tmp/image
[...]
==19224== Invalid read of size 1
==19224== at 0x67302E: gunzip (loader.c:558)
==19224== by 0x673907: load_image_gzipped_buffer (loader.c:788)
==19224== by 0xA18032: load_aarch64_image (boot.c:932)
==19224== by 0xA18489: arm_setup_direct_kernel_boot (boot.c:1063)
==19224== by 0xA18D90: arm_load_kernel (boot.c:1317)
==19224== by 0x9F3651: machvirt_init (virt.c:2114)
==19224== by 0x794B7A: machine_run_board_init (machine.c:1272)
==19224== by 0xD5CAD3: qemu_init_board (vl.c:2618)
==19224== by 0xD5CCA6: qmp_x_exit_preconfig (vl.c:2692)
==19224== by 0xD5F32E: qemu_init (vl.c:3713)
==19224== by 0x5ADDB1: main (main.c:49)
==19224== Address 0x3802a873 is 0 bytes after a block of size 3 alloc'd
==19224== at 0x4C31B0F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==19224== by 0x61E7657: g_file_get_contents (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.5600.4)
==19224== by 0x673895: load_image_gzipped_buffer (loader.c:771)
==19224== by 0xA18032: load_aarch64_image (boot.c:932)
==19224== by 0xA18489: arm_setup_direct_kernel_boot (boot.c:1063)
==19224== by 0xA18D90: arm_load_kernel (boot.c:1317)
==19224== by 0x9F3651: machvirt_init (virt.c:2114)
==19224== by 0x794B7A: machine_run_board_init (machine.c:1272)
==19224== by 0xD5CAD3: qemu_init_board (vl.c:2618)
==19224== by 0xD5CCA6: qmp_x_exit_preconfig (vl.c:2692)
==19224== by 0xD5F32E: qemu_init (vl.c:3713)
==19224== by 0x5ADDB1: main (main.c:49)
Check that we have enough bytes of data to read the header bytes that
we read before we read them.
Fixes: Coverity 1458997
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210812141803.20913-1-peter.maydell@linaro.org
---
hw/core/loader.c | 35 +++++++++++++++++++++++++----------
1 file changed, 25 insertions(+), 10 deletions(-)
diff --git a/hw/core/loader.c b/hw/core/loader.c
index 5b34869a541..c623318b737 100644
--- a/hw/core/loader.c
+++ b/hw/core/loader.c
@@ -555,24 +555,35 @@ ssize_t gunzip(void *dst, size_t dstlen, uint8_t *src, size_t srclen)
/* skip header */
i = 10;
+ if (srclen < 4) {
+ goto toosmall;
+ }
flags = src[3];
if (src[2] != DEFLATED || (flags & RESERVED) != 0) {
puts ("Error: Bad gzipped data\n");
return -1;
}
- if ((flags & EXTRA_FIELD) != 0)
+ if ((flags & EXTRA_FIELD) != 0) {
+ if (srclen < 12) {
+ goto toosmall;
+ }
i = 12 + src[10] + (src[11] << 8);
- if ((flags & ORIG_NAME) != 0)
- while (src[i++] != 0)
- ;
- if ((flags & COMMENT) != 0)
- while (src[i++] != 0)
- ;
- if ((flags & HEAD_CRC) != 0)
+ }
+ if ((flags & ORIG_NAME) != 0) {
+ while (i < srclen && src[i++] != 0) {
+ /* do nothing */
+ }
+ }
+ if ((flags & COMMENT) != 0) {
+ while (i < srclen && src[i++] != 0) {
+ /* do nothing */
+ }
+ }
+ if ((flags & HEAD_CRC) != 0) {
i += 2;
+ }
if (i >= srclen) {
- puts ("Error: gunzip out of data in header\n");
- return -1;
+ goto toosmall;
}
s.zalloc = zalloc;
@@ -596,6 +607,10 @@ ssize_t gunzip(void *dst, size_t dstlen, uint8_t *src, size_t srclen)
inflateEnd(&s);
return dstbytes;
+
+toosmall:
+ puts("Error: gunzip out of data in header\n");
+ return -1;
}
/* Load a U-Boot image. */
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 24/37] softmmu/physmem.c: Remove unneeded NULL check in qemu_ram_alloc_from_fd()
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (22 preceding siblings ...)
2021-08-26 17:02 ` [PULL 23/37] hw/core/loader: In gunzip(), check index is in range before use, not after Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 25/37] softmmu/physmem.c: Check return value from realpath() Peter Maydell
` (13 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
In the alignment check added to qemu_ram_alloc_from_fd() in commit
ce317be98db0dfdfa, the condition includes a check that 'mr' is not
NULL. This check is unnecessary because we can assume that the
caller always passes us a valid MemoryRegion, and indeed later in the
function we assume mr is not NULL when we pass it to file_ram_alloc()
as new_block->mr. Remove it.
Fixes: Coverity 1459867
Fixes: ce317be98d ("exec: fetch the alignment of Linux devdax pmem character device nodes")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Message-id: 20210812150624.29139-1-peter.maydell@linaro.org
---
softmmu/physmem.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/softmmu/physmem.c b/softmmu/physmem.c
index 2e18947598e..31baf3a8877 100644
--- a/softmmu/physmem.c
+++ b/softmmu/physmem.c
@@ -2075,7 +2075,7 @@ RAMBlock *qemu_ram_alloc_from_fd(ram_addr_t size, MemoryRegion *mr,
}
file_align = get_file_align(fd);
- if (file_align > 0 && mr && file_align > mr->align) {
+ if (file_align > 0 && file_align > mr->align) {
error_setg(errp, "backing store align 0x%" PRIx64
" is larger than 'align' option 0x%" PRIx64,
file_align, mr->align);
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 25/37] softmmu/physmem.c: Check return value from realpath()
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (23 preceding siblings ...)
2021-08-26 17:02 ` [PULL 24/37] softmmu/physmem.c: Remove unneeded NULL check in qemu_ram_alloc_from_fd() Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 26/37] net: Zero sockaddr_in in parse_host_port() Peter Maydell
` (12 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
The realpath() function can return NULL on error, so we need to check
for it to avoid crashing when we try to strstr() into it.
This can happen if we run out of memory, or if /sys/ is not mounted,
among other situations.
Fixes: Coverity 1459913, 1460474
Fixes: ce317be98db0 ("exec: fetch the alignment of Linux devdax pmem character device nodes")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Message-id: 20210812151525.31456-1-peter.maydell@linaro.org
---
softmmu/physmem.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/softmmu/physmem.c b/softmmu/physmem.c
index 31baf3a8877..23e77cb7715 100644
--- a/softmmu/physmem.c
+++ b/softmmu/physmem.c
@@ -1451,6 +1451,9 @@ static int64_t get_file_align(int fd)
path = g_strdup_printf("/sys/dev/char/%d:%d",
major(st.st_rdev), minor(st.st_rdev));
rpath = realpath(path, NULL);
+ if (!rpath) {
+ return -errno;
+ }
rc = daxctl_new(&ctx);
if (rc) {
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 26/37] net: Zero sockaddr_in in parse_host_port()
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (24 preceding siblings ...)
2021-08-26 17:02 ` [PULL 25/37] softmmu/physmem.c: Check return value from realpath() Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 27/37] gdbstub: Zero-initialize sockaddr structs Peter Maydell
` (11 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
We don't currently zero-initialize the 'struct sockaddr_in' that
parse_host_port() fills in, so any fields we don't explicitly
initialize might be left as random garbage. POSIX states that
implementations may define extensions in sockaddr_in, and that those
extensions must not trigger if zero-initialized. So not zero
initializing might result in inadvertently triggering an impdef
extension.
memset() the sockaddr_in before we start to fill it in.
Fixes: Coverity CID 1005338
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210813150506.7768-2-peter.maydell@linaro.org
---
net/net.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/net.c b/net/net.c
index 76bbb7c31b4..52c99196c69 100644
--- a/net/net.c
+++ b/net/net.c
@@ -75,6 +75,8 @@ int parse_host_port(struct sockaddr_in *saddr, const char *str,
const char *addr, *p, *r;
int port, ret = 0;
+ memset(saddr, 0, sizeof(*saddr));
+
substrings = g_strsplit(str, ":", 2);
if (!substrings || !substrings[0] || !substrings[1]) {
error_setg(errp, "host address '%s' doesn't contain ':' "
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 27/37] gdbstub: Zero-initialize sockaddr structs
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (25 preceding siblings ...)
2021-08-26 17:02 ` [PULL 26/37] net: Zero sockaddr_in in parse_host_port() Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 28/37] tests/qtest/ipmi-bt-test: Zero-initialize sockaddr struct Peter Maydell
` (10 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
Zero-initialize sockaddr_in and sockaddr_un structs that we're about
to fill in and pass to bind() or connect(), to ensure we don't leave
possible implementation-defined extension fields as uninitialized
garbage.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210813150506.7768-3-peter.maydell@linaro.org
---
gdbstub.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/gdbstub.c b/gdbstub.c
index 52bde5bdc97..5d8e6ae3cd9 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -3218,7 +3218,7 @@ static bool gdb_accept_socket(int gdb_fd)
static int gdbserver_open_socket(const char *path)
{
- struct sockaddr_un sockaddr;
+ struct sockaddr_un sockaddr = {};
int fd, ret;
fd = socket(AF_UNIX, SOCK_STREAM, 0);
@@ -3247,7 +3247,7 @@ static int gdbserver_open_socket(const char *path)
static bool gdb_accept_tcp(int gdb_fd)
{
- struct sockaddr_in sockaddr;
+ struct sockaddr_in sockaddr = {};
socklen_t len;
int fd;
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 28/37] tests/qtest/ipmi-bt-test: Zero-initialize sockaddr struct
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (26 preceding siblings ...)
2021-08-26 17:02 ` [PULL 27/37] gdbstub: Zero-initialize sockaddr structs Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:02 ` [PULL 29/37] tests/tcg/multiarch/linux-test: Zero-initialize sockaddr structs Peter Maydell
` (9 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
Zero-initialize the sockaddr_in struct that we're about to fill in
and pass to bind(), to ensure we don't leave possible
implementation-defined extension fields as uninitialized garbage.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20210813150506.7768-4-peter.maydell@linaro.org
---
tests/qtest/ipmi-bt-test.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tests/qtest/ipmi-bt-test.c b/tests/qtest/ipmi-bt-test.c
index 8492f02a9c3..19612e9405a 100644
--- a/tests/qtest/ipmi-bt-test.c
+++ b/tests/qtest/ipmi-bt-test.c
@@ -378,7 +378,7 @@ static void test_enable_irq(void)
*/
static void open_socket(void)
{
- struct sockaddr_in myaddr;
+ struct sockaddr_in myaddr = {};
socklen_t addrlen;
myaddr.sin_family = AF_INET;
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 29/37] tests/tcg/multiarch/linux-test: Zero-initialize sockaddr structs
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (27 preceding siblings ...)
2021-08-26 17:02 ` [PULL 28/37] tests/qtest/ipmi-bt-test: Zero-initialize sockaddr struct Peter Maydell
@ 2021-08-26 17:02 ` Peter Maydell
2021-08-26 17:03 ` [PULL 30/37] raspi: Use error_fatal for SoC realize errors, not error_abort Peter Maydell
` (8 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:02 UTC (permalink / raw)
To: qemu-devel
Zero-initialize sockaddr_in and sockaddr_un structs that we're about
to fill in and pass to bind() or connect(), to ensure we don't leave
possible implementation-defined extension fields as uninitialized
garbage.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210813150506.7768-5-peter.maydell@linaro.org
---
tests/tcg/multiarch/linux-test.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tests/tcg/multiarch/linux-test.c b/tests/tcg/multiarch/linux-test.c
index c8c6aeddeb3..019d8175ca6 100644
--- a/tests/tcg/multiarch/linux-test.c
+++ b/tests/tcg/multiarch/linux-test.c
@@ -251,7 +251,7 @@ static void test_time(void)
static int server_socket(void)
{
int val, fd;
- struct sockaddr_in sockaddr;
+ struct sockaddr_in sockaddr = {};
/* server socket */
fd = chk_error(socket(PF_INET, SOCK_STREAM, 0));
@@ -271,7 +271,7 @@ static int server_socket(void)
static int client_socket(uint16_t port)
{
int fd;
- struct sockaddr_in sockaddr;
+ struct sockaddr_in sockaddr = {};
/* server socket */
fd = chk_error(socket(PF_INET, SOCK_STREAM, 0));
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 30/37] raspi: Use error_fatal for SoC realize errors, not error_abort
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (28 preceding siblings ...)
2021-08-26 17:02 ` [PULL 29/37] tests/tcg/multiarch/linux-test: Zero-initialize sockaddr structs Peter Maydell
@ 2021-08-26 17:03 ` Peter Maydell
2021-08-26 17:03 ` [PULL 31/37] target/arm: Avoid assertion trying to use KVM and multiple ASes Peter Maydell
` (7 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:03 UTC (permalink / raw)
To: qemu-devel
The SoC realize can fail for legitimate reasons, because it propagates
errors up from CPU realize, which in turn can be provoked by user
error in setting commandline options. Use error_fatal so we report
the error message to the user and exit, rather than asserting
via error_abort.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210816135842.25302-2-peter.maydell@linaro.org
---
hw/arm/raspi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
index b30a17871f7..0ada91c05e9 100644
--- a/hw/arm/raspi.c
+++ b/hw/arm/raspi.c
@@ -281,7 +281,7 @@ static void raspi_machine_init(MachineState *machine)
object_property_add_const_link(OBJECT(&s->soc), "ram", OBJECT(machine->ram));
object_property_set_int(OBJECT(&s->soc), "board-rev", board_rev,
&error_abort);
- qdev_realize(DEVICE(&s->soc), NULL, &error_abort);
+ qdev_realize(DEVICE(&s->soc), NULL, &error_fatal);
/* Create and plug in the SD cards */
di = drive_get_next(IF_SD);
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 31/37] target/arm: Avoid assertion trying to use KVM and multiple ASes
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (29 preceding siblings ...)
2021-08-26 17:03 ` [PULL 30/37] raspi: Use error_fatal for SoC realize errors, not error_abort Peter Maydell
@ 2021-08-26 17:03 ` Peter Maydell
2021-08-26 17:03 ` [PULL 32/37] hw/arm/virt: Delete EL3 error checksnow provided in CPU realize Peter Maydell
` (6 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:03 UTC (permalink / raw)
To: qemu-devel
KVM cannot support multiple address spaces per CPU; if you try to
create more than one then cpu_address_space_init() will assert.
In the Arm CPU realize function, detect the configurations which
would cause us to need more than one AS, and cleanly fail the
realize rather than blundering on into the assertion. This
turns this:
$ qemu-system-aarch64 -enable-kvm -display none -cpu max -machine raspi3b
qemu-system-aarch64: ../../softmmu/physmem.c:747: cpu_address_space_init: Assertion `asidx == 0 || !kvm_enabled()' failed.
Aborted
into:
$ qemu-system-aarch64 -enable-kvm -display none -machine raspi3b
qemu-system-aarch64: Cannot enable KVM when guest CPU has EL3 enabled
and this:
$ qemu-system-aarch64 -enable-kvm -display none -machine mps3-an524
qemu-system-aarch64: ../../softmmu/physmem.c:747: cpu_address_space_init: Assertion `asidx == 0 || !kvm_enabled()' failed.
Aborted
into:
$ qemu-system-aarch64 -enable-kvm -display none -machine mps3-an524
qemu-system-aarch64: Cannot enable KVM when using an M-profile guest CPU
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/528
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210816135842.25302-3-peter.maydell@linaro.org
---
target/arm/cpu.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index a82e39dd97f..d631c4683c4 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -1422,6 +1422,29 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
}
}
+ if (kvm_enabled()) {
+ /*
+ * Catch all the cases which might cause us to create more than one
+ * address space for the CPU (otherwise we will assert() later in
+ * cpu_address_space_init()).
+ */
+ if (arm_feature(env, ARM_FEATURE_M)) {
+ error_setg(errp,
+ "Cannot enable KVM when using an M-profile guest CPU");
+ return;
+ }
+ if (cpu->has_el3) {
+ error_setg(errp,
+ "Cannot enable KVM when guest CPU has EL3 enabled");
+ return;
+ }
+ if (cpu->tag_memory) {
+ error_setg(errp,
+ "Cannot enable KVM when guest CPUs has MTE enabled");
+ return;
+ }
+ }
+
{
uint64_t scale;
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 32/37] hw/arm/virt: Delete EL3 error checksnow provided in CPU realize
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (30 preceding siblings ...)
2021-08-26 17:03 ` [PULL 31/37] target/arm: Avoid assertion trying to use KVM and multiple ASes Peter Maydell
@ 2021-08-26 17:03 ` Peter Maydell
2021-08-26 17:03 ` [PULL 33/37] target/arm: Implement HSTR.TTEE Peter Maydell
` (5 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:03 UTC (permalink / raw)
To: qemu-devel
Now that the CPU realize function will fail cleanly if we ask for EL3
when KVM is enabled, we don't need to check for errors explicitly in
the virt board code. The reported message is slightly different;
it is now:
qemu-system-aarch64: Cannot enable KVM when guest CPU has EL3 enabled
instead of:
qemu-system-aarch64: mach-virt: KVM does not support Security extensions
We don't delete the MTE check because there the logic is more
complex; deleting the check would work but makes the error message
less helpful, as it would read:
qemu-system-aarch64: MTE requested, but not supported by the guest CPU
instead of:
qemu-system-aarch64: mach-virt: KVM does not support providing MTE to the guest CPU
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210816135842.25302-4-peter.maydell@linaro.org
---
hw/arm/virt.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 81eda46b0bb..86c8a4ca3d7 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -1852,11 +1852,6 @@ static void machvirt_init(MachineState *machine)
}
if (vms->secure) {
- if (kvm_enabled()) {
- error_report("mach-virt: KVM does not support Security extensions");
- exit(1);
- }
-
/*
* The Secure view of the world is the same as the NonSecure,
* but with a few extra devices. Create it as a container region
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 33/37] target/arm: Implement HSTR.TTEE
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (31 preceding siblings ...)
2021-08-26 17:03 ` [PULL 32/37] hw/arm/virt: Delete EL3 error checksnow provided in CPU realize Peter Maydell
@ 2021-08-26 17:03 ` Peter Maydell
2021-08-26 17:03 ` [PULL 34/37] target/arm: Implement HSTR.TJDBX Peter Maydell
` (4 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:03 UTC (permalink / raw)
To: qemu-devel
In v7, the HSTR register has a TTEE bit which allows EL0/EL1 accesses
to the Thumb2EE TEECR and TEEHBR registers to be trapped to the
hypervisor. Implement these traps.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210816180305.20137-2-peter.maydell@linaro.org
---
target/arm/cpu.h | 2 ++
target/arm/helper.c | 18 ++++++++++++++++--
2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 1060825c746..0cd3206041e 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -1541,6 +1541,8 @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask)
#define SCR_ENSCXT (1U << 25)
#define SCR_ATA (1U << 26)
+#define HSTR_TTEE (1 << 16)
+
/* Return the current FPSCR value. */
uint32_t vfp_get_fpscr(CPUARMState *env);
void vfp_set_fpscr(CPUARMState *env, uint32_t val);
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 56c520cf8e9..54ac8c54b1f 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -2446,20 +2446,34 @@ static void teecr_write(CPUARMState *env, const ARMCPRegInfo *ri,
env->teecr = value;
}
+static CPAccessResult teecr_access(CPUARMState *env, const ARMCPRegInfo *ri,
+ bool isread)
+{
+ /*
+ * HSTR.TTEE only exists in v7A, not v8A, but v8A doesn't have T2EE
+ * at all, so we don't need to check whether we're v8A.
+ */
+ if (arm_current_el(env) < 2 && !arm_is_secure_below_el3(env) &&
+ (env->cp15.hstr_el2 & HSTR_TTEE)) {
+ return CP_ACCESS_TRAP_EL2;
+ }
+ return CP_ACCESS_OK;
+}
+
static CPAccessResult teehbr_access(CPUARMState *env, const ARMCPRegInfo *ri,
bool isread)
{
if (arm_current_el(env) == 0 && (env->teecr & 1)) {
return CP_ACCESS_TRAP;
}
- return CP_ACCESS_OK;
+ return teecr_access(env, ri, isread);
}
static const ARMCPRegInfo t2ee_cp_reginfo[] = {
{ .name = "TEECR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 6, .opc2 = 0,
.access = PL1_RW, .fieldoffset = offsetof(CPUARMState, teecr),
.resetvalue = 0,
- .writefn = teecr_write },
+ .writefn = teecr_write, .accessfn = teecr_access },
{ .name = "TEEHBR", .cp = 14, .crn = 1, .crm = 0, .opc1 = 6, .opc2 = 0,
.access = PL0_RW, .fieldoffset = offsetof(CPUARMState, teehbr),
.accessfn = teehbr_access, .resetvalue = 0 },
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 34/37] target/arm: Implement HSTR.TJDBX
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (32 preceding siblings ...)
2021-08-26 17:03 ` [PULL 33/37] target/arm: Implement HSTR.TTEE Peter Maydell
@ 2021-08-26 17:03 ` Peter Maydell
2021-08-26 17:03 ` [PULL 35/37] target/arm: Do hflags rebuild in cpsr_write() Peter Maydell
` (3 subsequent siblings)
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:03 UTC (permalink / raw)
To: qemu-devel
In v7A, the HSTR register has a TJDBX bit which traps NS EL0/EL1
access to the JOSCR and JMCR trivial Jazelle registers, and also BXJ.
Implement these traps. In v8A this HSTR bit doesn't exist, so don't
trap for v8A CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210816180305.20137-3-peter.maydell@linaro.org
---
target/arm/cpu.h | 1 +
target/arm/helper.h | 2 ++
target/arm/syndrome.h | 7 +++++++
target/arm/helper.c | 17 +++++++++++++++++
target/arm/op_helper.c | 16 ++++++++++++++++
target/arm/translate.c | 12 ++++++++++++
6 files changed, 55 insertions(+)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 0cd3206041e..09760333ccd 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -1542,6 +1542,7 @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask)
#define SCR_ATA (1U << 26)
#define HSTR_TTEE (1 << 16)
+#define HSTR_TJDBX (1 << 17)
/* Return the current FPSCR value. */
uint32_t vfp_get_fpscr(CPUARMState *env);
diff --git a/target/arm/helper.h b/target/arm/helper.h
index aee8f0019b4..448a86edfdc 100644
--- a/target/arm/helper.h
+++ b/target/arm/helper.h
@@ -73,6 +73,8 @@ DEF_HELPER_2(v7m_vlldm, void, env, i32)
DEF_HELPER_2(v8m_stackcheck, void, env, i32)
+DEF_HELPER_FLAGS_2(check_bxj_trap, TCG_CALL_NO_WG, void, env, i32)
+
DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32)
DEF_HELPER_3(set_cp_reg, void, env, ptr, i32)
DEF_HELPER_2(get_cp_reg, i32, env, ptr)
diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index 39a31260f2d..8dd88a0cb17 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -36,6 +36,7 @@ enum arm_exception_class {
EC_ADVSIMDFPACCESSTRAP = 0x07,
EC_FPIDTRAP = 0x08,
EC_PACTRAP = 0x09,
+ EC_BXJTRAP = 0x0a,
EC_CP14RRTTRAP = 0x0c,
EC_BTITRAP = 0x0d,
EC_ILLEGALSTATE = 0x0e,
@@ -215,6 +216,12 @@ static inline uint32_t syn_btitrap(int btype)
return (EC_BTITRAP << ARM_EL_EC_SHIFT) | btype;
}
+static inline uint32_t syn_bxjtrap(int cv, int cond, int rm)
+{
+ return (EC_BXJTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL |
+ (cv << 24) | (cond << 20) | rm;
+}
+
static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc)
{
return (EC_INSNABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 54ac8c54b1f..d2dd4aa0b80 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -7602,6 +7602,21 @@ static CPAccessResult access_jazelle(CPUARMState *env, const ARMCPRegInfo *ri,
return CP_ACCESS_OK;
}
+static CPAccessResult access_joscr_jmcr(CPUARMState *env,
+ const ARMCPRegInfo *ri, bool isread)
+{
+ /*
+ * HSTR.TJDBX traps JOSCR and JMCR accesses, but it exists only
+ * in v7A, not in v8A.
+ */
+ if (!arm_feature(env, ARM_FEATURE_V8) &&
+ arm_current_el(env) < 2 && !arm_is_secure_below_el3(env) &&
+ (env->cp15.hstr_el2 & HSTR_TJDBX)) {
+ return CP_ACCESS_TRAP_EL2;
+ }
+ return CP_ACCESS_OK;
+}
+
static const ARMCPRegInfo jazelle_regs[] = {
{ .name = "JIDR",
.cp = 14, .crn = 0, .crm = 0, .opc1 = 7, .opc2 = 0,
@@ -7609,9 +7624,11 @@ static const ARMCPRegInfo jazelle_regs[] = {
.type = ARM_CP_CONST, .resetvalue = 0 },
{ .name = "JOSCR",
.cp = 14, .crn = 1, .crm = 0, .opc1 = 7, .opc2 = 0,
+ .accessfn = access_joscr_jmcr,
.access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
{ .name = "JMCR",
.cp = 14, .crn = 2, .crm = 0, .opc1 = 7, .opc2 = 0,
+ .accessfn = access_joscr_jmcr,
.access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
REGINFO_SENTINEL
};
diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c
index e98fd863057..70b42b55fd0 100644
--- a/target/arm/op_helper.c
+++ b/target/arm/op_helper.c
@@ -224,6 +224,22 @@ void HELPER(setend)(CPUARMState *env)
arm_rebuild_hflags(env);
}
+void HELPER(check_bxj_trap)(CPUARMState *env, uint32_t rm)
+{
+ /*
+ * Only called if in NS EL0 or EL1 for a BXJ for a v7A CPU;
+ * check if HSTR.TJDBX means we need to trap to EL2.
+ */
+ if (env->cp15.hstr_el2 & HSTR_TJDBX) {
+ /*
+ * We know the condition code check passed, so take the IMPDEF
+ * choice to always report CV=1 COND 0xe
+ */
+ uint32_t syn = syn_bxjtrap(1, 0xe, rm);
+ raise_exception_ra(env, EXCP_HYP_TRAP, syn, 2, GETPC());
+ }
+}
+
#ifndef CONFIG_USER_ONLY
/* Function checks whether WFx (WFI/WFE) instructions are set up to be trapped.
* The function returns the target EL (1-3) if the instruction is to be trapped;
diff --git a/target/arm/translate.c b/target/arm/translate.c
index 115aa768b6a..24b7f49d767 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -6440,6 +6440,18 @@ static bool trans_BXJ(DisasContext *s, arg_BXJ *a)
if (!ENABLE_ARCH_5J || arm_dc_feature(s, ARM_FEATURE_M)) {
return false;
}
+ /*
+ * v7A allows BXJ to be trapped via HSTR.TJDBX. We don't waste a
+ * TBFLAGS bit on a basically-never-happens case, so call a helper
+ * function to check for the trap and raise the exception if needed
+ * (passing it the register number for the syndrome value).
+ * v8A doesn't have this HSTR bit.
+ */
+ if (!arm_dc_feature(s, ARM_FEATURE_V8) &&
+ arm_dc_feature(s, ARM_FEATURE_EL2) &&
+ s->current_el < 2 && s->ns) {
+ gen_helper_check_bxj_trap(cpu_env, tcg_constant_i32(a->rm));
+ }
/* Trivial implementation equivalent to bx. */
gen_bx(s, load_reg(s, a->rm));
return true;
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 35/37] target/arm: Do hflags rebuild in cpsr_write()
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (33 preceding siblings ...)
2021-08-26 17:03 ` [PULL 34/37] target/arm: Implement HSTR.TJDBX Peter Maydell
@ 2021-08-26 17:03 ` Peter Maydell
2021-08-26 17:18 ` Philippe Mathieu-Daudé
2021-08-26 17:03 ` [PULL 36/37] hw/arm/xlnx-versal: Add unimplemented APU mmio Peter Maydell
` (2 subsequent siblings)
37 siblings, 1 reply; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:03 UTC (permalink / raw)
To: qemu-devel
Currently we rely on all the callsites of cpsr_write() to rebuild the
cached hflags if they change one of the CPSR bits which we use as a
TB flag and cache in hflags. This is a bit awkward when we want to
change the set of CPSR bits that we cache, because it means we need
to re-audit all the cpsr_write() callsites to see which flags they
are writing and whether they now need to rebuild the hflags.
Switch instead to making cpsr_write() call arm_rebuild_hflags()
itself if one of the bits being changed is a cached bit.
We don't do the rebuild for the CPSRWriteRaw write type, because that
kind of write is generally doing something special anyway. For the
CPSRWriteRaw callsites in the KVM code and inbound migration we
definitely don't want to recalculate the hflags; the callsites in
boot.c and arm-powerctl.c have to do a rebuild-hflags call themselves
anyway because of other CPU state changes they make.
This allows us to drop explicit arm_rebuild_hflags() calls in a
couple of places where the only reason we needed to call it was the
CPSR write.
This fixes a bug where we were incorrectly failing to rebuild hflags
in the code path for a gdbstub write to CPSR, which meant that you
could make QEMU assert by breaking into a running guest, altering the
CPSR to change the value of, for example, CPSR.E, and then
continuing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210817201843.3829-1-peter.maydell@linaro.org
---
target/arm/cpu.h | 10 ++++++++--
linux-user/arm/signal.c | 2 --
target/arm/helper.c | 5 +++++
3 files changed, 13 insertions(+), 4 deletions(-)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 09760333ccd..6a987f65e41 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -1398,11 +1398,17 @@ uint32_t cpsr_read(CPUARMState *env);
typedef enum CPSRWriteType {
CPSRWriteByInstr = 0, /* from guest MSR or CPS */
CPSRWriteExceptionReturn = 1, /* from guest exception return insn */
- CPSRWriteRaw = 2, /* trust values, do not switch reg banks */
+ CPSRWriteRaw = 2,
+ /* trust values, no reg bank switch, no hflags rebuild */
CPSRWriteByGDBStub = 3, /* from the GDB stub */
} CPSRWriteType;
-/* Set the CPSR. Note that some bits of mask must be all-set or all-clear.*/
+/*
+ * Set the CPSR. Note that some bits of mask must be all-set or all-clear.
+ * This will do an arm_rebuild_hflags() if any of the bits in @mask
+ * correspond to TB flags bits cached in the hflags, unless @write_type
+ * is CPSRWriteRaw.
+ */
void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
CPSRWriteType write_type);
diff --git a/linux-user/arm/signal.c b/linux-user/arm/signal.c
index 32b68ee302b..1dfcfd2d57b 100644
--- a/linux-user/arm/signal.c
+++ b/linux-user/arm/signal.c
@@ -289,7 +289,6 @@ setup_return(CPUARMState *env, struct target_sigaction *ka,
env->regs[14] = retcode;
env->regs[15] = handler & (thumb ? ~1 : ~3);
cpsr_write(env, cpsr, CPSR_IT | CPSR_T | CPSR_E, CPSRWriteByInstr);
- arm_rebuild_hflags(env);
return 0;
}
@@ -547,7 +546,6 @@ restore_sigcontext(CPUARMState *env, struct target_sigcontext *sc)
__get_user(env->regs[15], &sc->arm_pc);
__get_user(cpsr, &sc->arm_cpsr);
cpsr_write(env, cpsr, CPSR_USER | CPSR_EXEC, CPSRWriteByInstr);
- arm_rebuild_hflags(env);
err |= !valid_user_regs(env);
diff --git a/target/arm/helper.c b/target/arm/helper.c
index d2dd4aa0b80..a7ae78146d4 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -9246,6 +9246,8 @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
CPSRWriteType write_type)
{
uint32_t changed_daif;
+ bool rebuild_hflags = (write_type != CPSRWriteRaw) &&
+ (mask & (CPSR_M | CPSR_E | CPSR_IL));
if (mask & CPSR_NZCV) {
env->ZF = (~val) & CPSR_Z;
@@ -9365,6 +9367,9 @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
}
mask &= ~CACHED_CPSR_BITS;
env->uncached_cpsr = (env->uncached_cpsr & ~mask) | (val & mask);
+ if (rebuild_hflags) {
+ arm_rebuild_hflags(env);
+ }
}
/* Sign/zero extend */
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 36/37] hw/arm/xlnx-versal: Add unimplemented APU mmio
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (34 preceding siblings ...)
2021-08-26 17:03 ` [PULL 35/37] target/arm: Do hflags rebuild in cpsr_write() Peter Maydell
@ 2021-08-26 17:03 ` Peter Maydell
2021-08-26 17:03 ` [PULL 37/37] hw/arm/xlnx-zynqmp: " Peter Maydell
2021-08-26 19:44 ` [PULL 00/37] target-arm queue Peter Maydell
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:03 UTC (permalink / raw)
To: qemu-devel
From: Tong Ho <tong.ho@xilinx.com>
Add unimplemented APU mmio region to xlnx-versal for booting
bare-metal guests built with standalone bsp, which access the
region from one of the following places:
https://github.com/Xilinx/embeddedsw/blob/release-2020.2/lib/bsp/standalone/src/arm/ARMv8/64bit/armclang/boot.S#L139
https://github.com/Xilinx/embeddedsw/blob/release-2020.2/lib/bsp/standalone/src/arm/ARMv8/64bit/gcc/boot.S#L183
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Message-id: 20210823173818.201259-2-tong.ho@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/arm/xlnx-versal.h | 2 ++
hw/arm/xlnx-versal.c | 2 ++
2 files changed, 4 insertions(+)
diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h
index 22a8fa5d11b..9b790517478 100644
--- a/include/hw/arm/xlnx-versal.h
+++ b/include/hw/arm/xlnx-versal.h
@@ -167,6 +167,8 @@ struct Versal {
#define MM_IOU_SCNTRS_SIZE 0x10000
#define MM_FPD_CRF 0xfd1a0000U
#define MM_FPD_CRF_SIZE 0x140000
+#define MM_FPD_FPD_APU 0xfd5c0000
+#define MM_FPD_FPD_APU_SIZE 0x100
#define MM_PMC_SD0 0xf1040000U
#define MM_PMC_SD0_SIZE 0x10000
diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c
index d60eb4fb184..547a26603a3 100644
--- a/hw/arm/xlnx-versal.c
+++ b/hw/arm/xlnx-versal.c
@@ -378,6 +378,8 @@ static void versal_unimp(Versal *s)
MM_CRL, MM_CRL_SIZE);
versal_unimp_area(s, "crf", &s->mr_ps,
MM_FPD_CRF, MM_FPD_CRF_SIZE);
+ versal_unimp_area(s, "apu", &s->mr_ps,
+ MM_FPD_FPD_APU, MM_FPD_FPD_APU_SIZE);
versal_unimp_area(s, "crp", &s->mr_ps,
MM_PMC_CRP, MM_PMC_CRP_SIZE);
versal_unimp_area(s, "iou-scntr", &s->mr_ps,
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PULL 37/37] hw/arm/xlnx-zynqmp: Add unimplemented APU mmio
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (35 preceding siblings ...)
2021-08-26 17:03 ` [PULL 36/37] hw/arm/xlnx-versal: Add unimplemented APU mmio Peter Maydell
@ 2021-08-26 17:03 ` Peter Maydell
2021-08-26 19:44 ` [PULL 00/37] target-arm queue Peter Maydell
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 17:03 UTC (permalink / raw)
To: qemu-devel
From: Tong Ho <tong.ho@xilinx.com>
Add unimplemented APU mmio region to xlnx-zynqmp for booting
bare-metal guests built with standalone bsp, which access the
region from one of the following places:
https://github.com/Xilinx/embeddedsw/blob/release-2020.2/lib/bsp/standalone/src/arm/ARMv8/64bit/armclang/boot.S#L139
https://github.com/Xilinx/embeddedsw/blob/release-2020.2/lib/bsp/standalone/src/arm/ARMv8/64bit/gcc/boot.S#L183
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Message-id: 20210823173818.201259-3-tong.ho@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/arm/xlnx-zynqmp.h | 7 +++++++
hw/arm/xlnx-zynqmp.c | 32 ++++++++++++++++++++++++++++++++
2 files changed, 39 insertions(+)
diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h
index d3e2ef97f67..c84fe15996e 100644
--- a/include/hw/arm/xlnx-zynqmp.h
+++ b/include/hw/arm/xlnx-zynqmp.h
@@ -79,6 +79,11 @@ OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP)
#define XLNX_ZYNQMP_MAX_RAM_SIZE (XLNX_ZYNQMP_MAX_LOW_RAM_SIZE + \
XLNX_ZYNQMP_MAX_HIGH_RAM_SIZE)
+/*
+ * Unimplemented mmio regions needed to boot some images.
+ */
+#define XLNX_ZYNQMP_NUM_UNIMP_AREAS 1
+
struct XlnxZynqMPState {
/*< private >*/
DeviceState parent_obj;
@@ -96,6 +101,8 @@ struct XlnxZynqMPState {
MemoryRegion *ddr_ram;
MemoryRegion ddr_ram_low, ddr_ram_high;
+ MemoryRegion mr_unimp[XLNX_ZYNQMP_NUM_UNIMP_AREAS];
+
CadenceGEMState gem[XLNX_ZYNQMP_NUM_GEMS];
CadenceUARTState uart[XLNX_ZYNQMP_NUM_UARTS];
XlnxZynqMPCANState can[XLNX_ZYNQMP_NUM_CAN];
diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index 6cfce26210d..4e5a471e30b 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -20,6 +20,7 @@
#include "qemu/module.h"
#include "hw/arm/xlnx-zynqmp.h"
#include "hw/intc/arm_gic_common.h"
+#include "hw/misc/unimp.h"
#include "hw/boards.h"
#include "sysemu/kvm.h"
#include "sysemu/sysemu.h"
@@ -56,6 +57,9 @@
#define DPDMA_ADDR 0xfd4c0000
#define DPDMA_IRQ 116
+#define APU_ADDR 0xfd5c0000
+#define APU_SIZE 0x100
+
#define IPI_ADDR 0xFF300000
#define IPI_IRQ 64
@@ -222,6 +226,32 @@ static void xlnx_zynqmp_create_rpu(MachineState *ms, XlnxZynqMPState *s,
qdev_realize(DEVICE(&s->rpu_cluster), NULL, &error_fatal);
}
+static void xlnx_zynqmp_create_unimp_mmio(XlnxZynqMPState *s)
+{
+ static const struct UnimpInfo {
+ const char *name;
+ hwaddr base;
+ hwaddr size;
+ } unimp_areas[ARRAY_SIZE(s->mr_unimp)] = {
+ { .name = "apu", APU_ADDR, APU_SIZE },
+ };
+ unsigned int nr;
+
+ for (nr = 0; nr < ARRAY_SIZE(unimp_areas); nr++) {
+ const struct UnimpInfo *info = &unimp_areas[nr];
+ DeviceState *dev = qdev_new(TYPE_UNIMPLEMENTED_DEVICE);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+
+ assert(info->name && info->base && info->size > 0);
+ qdev_prop_set_string(dev, "name", info->name);
+ qdev_prop_set_uint64(dev, "size", info->size);
+ object_property_add_child(OBJECT(s), info->name, OBJECT(dev));
+
+ sysbus_realize_and_unref(sbd, &error_fatal);
+ sysbus_mmio_map(sbd, 0, info->base);
+ }
+}
+
static void xlnx_zynqmp_init(Object *obj)
{
MachineState *ms = MACHINE(qdev_get_machine());
@@ -596,6 +626,8 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, RTC_ADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0, gic_spi[RTC_IRQ]);
+ xlnx_zynqmp_create_unimp_mmio(s);
+
for (i = 0; i < XLNX_ZYNQMP_NUM_GDMA_CH; i++) {
if (!object_property_set_uint(OBJECT(&s->gdma[i]), "bus-width", 128,
errp)) {
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* Re: [PULL 35/37] target/arm: Do hflags rebuild in cpsr_write()
2021-08-26 17:03 ` [PULL 35/37] target/arm: Do hflags rebuild in cpsr_write() Peter Maydell
@ 2021-08-26 17:18 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 40+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-08-26 17:18 UTC (permalink / raw)
To: Peter Maydell, qemu-devel
On 8/26/21 7:03 PM, Peter Maydell wrote:
> Currently we rely on all the callsites of cpsr_write() to rebuild the
> cached hflags if they change one of the CPSR bits which we use as a
> TB flag and cache in hflags. This is a bit awkward when we want to
> change the set of CPSR bits that we cache, because it means we need
> to re-audit all the cpsr_write() callsites to see which flags they
> are writing and whether they now need to rebuild the hflags.
>
> Switch instead to making cpsr_write() call arm_rebuild_hflags()
> itself if one of the bits being changed is a cached bit.
>
> We don't do the rebuild for the CPSRWriteRaw write type, because that
> kind of write is generally doing something special anyway. For the
> CPSRWriteRaw callsites in the KVM code and inbound migration we
> definitely don't want to recalculate the hflags; the callsites in
> boot.c and arm-powerctl.c have to do a rebuild-hflags call themselves
> anyway because of other CPU state changes they make.
>
> This allows us to drop explicit arm_rebuild_hflags() calls in a
> couple of places where the only reason we needed to call it was the
> CPSR write.
Just noticing this patch, nice.
> This fixes a bug where we were incorrectly failing to rebuild hflags
> in the code path for a gdbstub write to CPSR, which meant that you
> could make QEMU assert by breaking into a running guest, altering the
> CPSR to change the value of, for example, CPSR.E, and then
> continuing.
>
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
> Message-id: 20210817201843.3829-1-peter.maydell@linaro.org
> ---
> target/arm/cpu.h | 10 ++++++++--
> linux-user/arm/signal.c | 2 --
> target/arm/helper.c | 5 +++++
> 3 files changed, 13 insertions(+), 4 deletions(-)
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PULL 00/37] target-arm queue
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
` (36 preceding siblings ...)
2021-08-26 17:03 ` [PULL 37/37] hw/arm/xlnx-zynqmp: " Peter Maydell
@ 2021-08-26 19:44 ` Peter Maydell
37 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2021-08-26 19:44 UTC (permalink / raw)
To: QEMU Developers
On Thu, 26 Aug 2021 at 18:03, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> More accumulated patches from during the freeze...
>
> The following changes since commit c83fcfaf8a54d0d034bd0edf7bbb3b0d16669be9:
>
> Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-08-26' into staging (2021-08-26 13:42:34 +0100)
>
> are available in the Git repository at:
>
> https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210826
>
> for you to fetch changes up to d2e6f370138a7f32bc28b20dcd55374b7a638f39:
>
> hw/arm/xlnx-zynqmp: Add unimplemented APU mmio (2021-08-26 17:02:01 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
> * hw/dma/xlnx-zdma, xlnx_csu_dma: Require 'dma' link property to be set
> * hw/arm/Kconfig: no need to enable ACPI_MEMORY_HOTPLUG/ACPI_NVDIMM explicitly
> * target/arm/cpu: Introduce sve_vq_supported bitmap
> * docs/specs: Convert ACPI spec docs to rST
> * arch_init: Clean up and refactoring
> * hw/core/loader: In gunzip(), check index is in range before use, not after
> * softmmu/physmem.c: Remove unneeded NULL check in qemu_ram_alloc_from_fd()
> * softmmu/physmem.c: Check return value from realpath()
> * Zero-initialize sockaddr_in structs
> * raspi: Use error_fatal for SoC realize errors, not error_abort
> * target/arm: Avoid assertion trying to use KVM and multiple ASes
> * target/arm: Implement HSTR.TTEE
> * target/arm: Implement HSTR.TJDBX
> * target/arm: Do hflags rebuild in cpsr_write()
> * hw/arm/xlnx-versal, xlnx-zynqmp: Add unimplemented APU mmio
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/6.2
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 40+ messages in thread
end of thread, other threads:[~2021-08-26 19:46 UTC | newest]
Thread overview: 40+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-26 17:02 [PULL 00/37] target-arm queue Peter Maydell
2021-08-26 17:02 ` [PULL 01/37] hw/arm/xlnx-zynqmp: Realize qspi controller *after* qspi_dma Peter Maydell
2021-08-26 17:02 ` [PULL 02/37] hw/dma/xlnx_csu_dma: Run trivial checks early in realize() Peter Maydell
2021-08-26 17:02 ` [PULL 03/37] hw/dma/xlnx_csu_dma: Always expect 'dma' link property to be set Peter Maydell
2021-08-26 17:02 ` [PULL 04/37] hw/dma/xlnx-zdma " Peter Maydell
2021-08-26 17:02 ` [PULL 05/37] hw/arm/Kconfig: no need to enable ACPI_MEMORY_HOTPLUG/ACPI_NVDIMM explicitly Peter Maydell
2021-08-26 17:02 ` [PULL 06/37] target/arm/cpu: Introduce sve_vq_supported bitmap Peter Maydell
2021-08-26 17:02 ` [PULL 07/37] target/arm/kvm64: Ensure sve vls map is completely clear Peter Maydell
2021-08-26 17:02 ` [PULL 08/37] target/arm/cpu64: Replace kvm_supported with sve_vq_supported Peter Maydell
2021-08-26 17:02 ` [PULL 09/37] target/arm/cpu64: Validate sve vector lengths are supported Peter Maydell
2021-08-26 17:02 ` [PULL 10/37] docs/specs/acpu_cpu_hotplug: Convert to rST Peter Maydell
2021-08-26 17:02 ` [PULL 11/37] docs/specs/acpi_mem_hotplug: " Peter Maydell
2021-08-26 17:02 ` [PULL 12/37] docs/specs/acpi_pci_hotplug: " Peter Maydell
2021-08-26 17:02 ` [PULL 13/37] docs/specs/acpi_nvdimm: " Peter Maydell
2021-08-26 17:02 ` [PULL 14/37] MAINTAINERS: Add ACPI specs documents to ACPI and NVDIMM sections Peter Maydell
2021-08-26 17:02 ` [PULL 15/37] softmmu: Use accel_find("xen") instead of xen_available() Peter Maydell
2021-08-26 17:02 ` [PULL 16/37] monitor: Use accel_find("kvm") instead of kvm_available() Peter Maydell
2021-08-26 17:02 ` [PULL 17/37] softmmu/arch_init.c: Trim down include list Peter Maydell
2021-08-26 17:02 ` [PULL 18/37] meson.build: Define QEMU_ARCH in config-target.h Peter Maydell
2021-08-26 17:02 ` [PULL 19/37] arch_init.h: Add QEMU_ARCH_HEXAGON Peter Maydell
2021-08-26 17:02 ` [PULL 20/37] arch_init.h: Move QEMU_ARCH_VIRTIO_* to qdev-monitor.c Peter Maydell
2021-08-26 17:02 ` [PULL 21/37] arch_init.h: Don't include arch_init.h unnecessarily Peter Maydell
2021-08-26 17:02 ` [PULL 22/37] stubs: Remove unused arch_type.c stub Peter Maydell
2021-08-26 17:02 ` [PULL 23/37] hw/core/loader: In gunzip(), check index is in range before use, not after Peter Maydell
2021-08-26 17:02 ` [PULL 24/37] softmmu/physmem.c: Remove unneeded NULL check in qemu_ram_alloc_from_fd() Peter Maydell
2021-08-26 17:02 ` [PULL 25/37] softmmu/physmem.c: Check return value from realpath() Peter Maydell
2021-08-26 17:02 ` [PULL 26/37] net: Zero sockaddr_in in parse_host_port() Peter Maydell
2021-08-26 17:02 ` [PULL 27/37] gdbstub: Zero-initialize sockaddr structs Peter Maydell
2021-08-26 17:02 ` [PULL 28/37] tests/qtest/ipmi-bt-test: Zero-initialize sockaddr struct Peter Maydell
2021-08-26 17:02 ` [PULL 29/37] tests/tcg/multiarch/linux-test: Zero-initialize sockaddr structs Peter Maydell
2021-08-26 17:03 ` [PULL 30/37] raspi: Use error_fatal for SoC realize errors, not error_abort Peter Maydell
2021-08-26 17:03 ` [PULL 31/37] target/arm: Avoid assertion trying to use KVM and multiple ASes Peter Maydell
2021-08-26 17:03 ` [PULL 32/37] hw/arm/virt: Delete EL3 error checksnow provided in CPU realize Peter Maydell
2021-08-26 17:03 ` [PULL 33/37] target/arm: Implement HSTR.TTEE Peter Maydell
2021-08-26 17:03 ` [PULL 34/37] target/arm: Implement HSTR.TJDBX Peter Maydell
2021-08-26 17:03 ` [PULL 35/37] target/arm: Do hflags rebuild in cpsr_write() Peter Maydell
2021-08-26 17:18 ` Philippe Mathieu-Daudé
2021-08-26 17:03 ` [PULL 36/37] hw/arm/xlnx-versal: Add unimplemented APU mmio Peter Maydell
2021-08-26 17:03 ` [PULL 37/37] hw/arm/xlnx-zynqmp: " Peter Maydell
2021-08-26 19:44 ` [PULL 00/37] target-arm queue Peter Maydell
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.