From: Michael Walle <michael@walle.cc> To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>, Vladimir Oltean <vladimir.oltean@nxp.com>, Michael Walle <michael@walle.cc> Subject: [PATCH 0/7] arm64: dts: ls1028: GPU support and cleanups Date: Tue, 31 Aug 2021 15:40:06 +0200 [thread overview] Message-ID: <20210831134013.1625527-1-michael@walle.cc> (raw) In an attempt to unify u-boot's and linux' device tree for the LS1028A SoC we first need to clean up some network related stuff. Vladimir suggested to move the Ethernet PHYs into the MDIO controller node, which is already the case for u-boot's device tree. Further we unify the use of phy-mode and phy-connection-type. Both have the same meaning, but phy-mode is used more often in the kernel and for the ls1028a both were used. Replace phy-connection-type with phy-mode. Further move all the nodes which belongs to the CCSR into the /soc node. These are the Mali display conntroller and its associated pixel clock PLL. Finally, add the GPU node for the etnaviv driver under /soc. Michael Walle (7): arm64: dts: ls1028a: move pixel clock pll into /soc arm64: dts: ls1028a: move Mali DP500 node into /soc arm64: dts: ls1028a: add Vivante GPU node arm64: dts: freescale: fix arm,sp805 compatible string arm64: dts: ls1028a: disable usb controller by default arm64: dts: ls1028a: move PHY nodes to MDIO controller arm64: dts: ls1028a: use phy-mode instead of phy-connection-type .../fsl-ls1028a-kontron-sl28-var1.dts | 60 ++++++++-------- .../fsl-ls1028a-kontron-sl28-var2.dts | 17 ++--- .../fsl-ls1028a-kontron-sl28-var4.dts | 49 +++++++------ .../freescale/fsl-ls1028a-kontron-sl28.dts | 31 +++++---- .../boot/dts/freescale/fsl-ls1028a-qds.dts | 10 ++- .../boot/dts/freescale/fsl-ls1028a-rdb.dts | 19 +++--- .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 68 +++++++++++-------- .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 16 ++--- .../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 16 ++--- 9 files changed, 149 insertions(+), 137 deletions(-) -- 2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Michael Walle <michael@walle.cc> To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>, Vladimir Oltean <vladimir.oltean@nxp.com>, Michael Walle <michael@walle.cc> Subject: [PATCH 0/7] arm64: dts: ls1028: GPU support and cleanups Date: Tue, 31 Aug 2021 15:40:06 +0200 [thread overview] Message-ID: <20210831134013.1625527-1-michael@walle.cc> (raw) In an attempt to unify u-boot's and linux' device tree for the LS1028A SoC we first need to clean up some network related stuff. Vladimir suggested to move the Ethernet PHYs into the MDIO controller node, which is already the case for u-boot's device tree. Further we unify the use of phy-mode and phy-connection-type. Both have the same meaning, but phy-mode is used more often in the kernel and for the ls1028a both were used. Replace phy-connection-type with phy-mode. Further move all the nodes which belongs to the CCSR into the /soc node. These are the Mali display conntroller and its associated pixel clock PLL. Finally, add the GPU node for the etnaviv driver under /soc. Michael Walle (7): arm64: dts: ls1028a: move pixel clock pll into /soc arm64: dts: ls1028a: move Mali DP500 node into /soc arm64: dts: ls1028a: add Vivante GPU node arm64: dts: freescale: fix arm,sp805 compatible string arm64: dts: ls1028a: disable usb controller by default arm64: dts: ls1028a: move PHY nodes to MDIO controller arm64: dts: ls1028a: use phy-mode instead of phy-connection-type .../fsl-ls1028a-kontron-sl28-var1.dts | 60 ++++++++-------- .../fsl-ls1028a-kontron-sl28-var2.dts | 17 ++--- .../fsl-ls1028a-kontron-sl28-var4.dts | 49 +++++++------ .../freescale/fsl-ls1028a-kontron-sl28.dts | 31 +++++---- .../boot/dts/freescale/fsl-ls1028a-qds.dts | 10 ++- .../boot/dts/freescale/fsl-ls1028a-rdb.dts | 19 +++--- .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 68 +++++++++++-------- .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 16 ++--- .../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 16 ++--- 9 files changed, 149 insertions(+), 137 deletions(-) -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-08-31 13:40 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-08-31 13:40 Michael Walle [this message] 2021-08-31 13:40 ` [PATCH 0/7] arm64: dts: ls1028: GPU support and cleanups Michael Walle 2021-08-31 13:40 ` [PATCH 1/7] arm64: dts: ls1028a: move pixel clock pll into /soc Michael Walle 2021-08-31 13:40 ` Michael Walle 2021-08-31 13:40 ` [PATCH 2/7] arm64: dts: ls1028a: move Mali DP500 node " Michael Walle 2021-08-31 13:40 ` Michael Walle 2022-01-20 8:06 ` Leo Li 2022-01-20 8:06 ` Leo Li 2022-01-20 8:17 ` Michael Walle 2022-01-20 8:17 ` Michael Walle 2021-08-31 13:40 ` [PATCH 3/7] arm64: dts: ls1028a: add Vivante GPU node Michael Walle 2021-08-31 13:40 ` Michael Walle 2021-08-31 13:40 ` [PATCH 4/7] arm64: dts: freescale: fix arm,sp805 compatible string Michael Walle 2021-08-31 13:40 ` Michael Walle 2021-08-31 13:40 ` [PATCH 5/7] arm64: dts: ls1028a: disable usb controller by default Michael Walle 2021-08-31 13:40 ` Michael Walle 2021-08-31 14:08 ` Vladimir Oltean 2021-08-31 14:08 ` Vladimir Oltean 2021-08-31 13:40 ` [PATCH 6/7] arm64: dts: ls1028a: move PHY nodes to MDIO controller Michael Walle 2021-08-31 13:40 ` Michael Walle 2021-08-31 14:07 ` Vladimir Oltean 2021-08-31 14:07 ` Vladimir Oltean 2021-08-31 13:40 ` [PATCH 7/7] arm64: dts: ls1028a: use phy-mode instead of phy-connection-type Michael Walle 2021-08-31 13:40 ` Michael Walle 2021-08-31 13:59 ` Vladimir Oltean 2021-08-31 13:59 ` Vladimir Oltean 2021-08-31 14:06 ` Michael Walle 2021-08-31 14:06 ` Michael Walle 2021-10-04 13:02 ` [PATCH 0/7] arm64: dts: ls1028: GPU support and cleanups Shawn Guo 2021-10-04 13:02 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210831134013.1625527-1-michael@walle.cc \ --to=michael@walle.cc \ --cc=devicetree@vger.kernel.org \ --cc=leoyang.li@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ --cc=vladimir.oltean@nxp.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.