[PULL 38/51] hw/arm/stm32f205: Wire up sysclk and refclk

[Peter Maydell <peter.maydell@linaro.org>]

Wire up the sysclk and refclk for the stm32f205 SoC.  This SoC always
runs the systick refclk at 1/8 the frequency of the main CPU clock,
so the board code only needs to provide a single sysclk clock.

Because there is only one board using this SoC, we convert the SoC
and the board together, rather than splitting it into "add clock to
SoC; connect clock in board; add error check in SoC code that clock
is wired up".

When the systick device starts honouring its clock inputs, this will
fix an emulation inaccuracy in the netduino2 board where the systick
reference clock was running at 1MHz rather than 15MHz.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alexandre Iooss <erdnaxe@crans.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210812093356.1946-13-peter.maydell@linaro.org
---
 include/hw/arm/stm32f205_soc.h |  4 ++++
 hw/arm/netduino2.c             | 12 +++++++-----
 hw/arm/stm32f205_soc.c         | 30 ++++++++++++++++++++++++++++++
 3 files changed, 41 insertions(+), 5 deletions(-)

diff --git a/include/hw/arm/stm32f205_soc.h b/include/hw/arm/stm32f205_soc.h
index 75251494917..849d3ed8891 100644
--- a/include/hw/arm/stm32f205_soc.h
+++ b/include/hw/arm/stm32f205_soc.h
@@ -32,6 +32,7 @@
 #include "hw/or-irq.h"
 #include "hw/ssi/stm32f2xx_spi.h"
 #include "hw/arm/armv7m.h"
+#include "hw/clock.h"
 #include "qom/object.h"
 
 #define TYPE_STM32F205_SOC "stm32f205-soc"
@@ -67,6 +68,9 @@ struct STM32F205State {
     MemoryRegion sram;
     MemoryRegion flash;
     MemoryRegion flash_alias;
+
+    Clock *sysclk;
+    Clock *refclk;
 };
 
 #endif
diff --git a/hw/arm/netduino2.c b/hw/arm/netduino2.c
index 1733b71507c..b5c0ba23ee5 100644
--- a/hw/arm/netduino2.c
+++ b/hw/arm/netduino2.c
@@ -26,6 +26,7 @@
 #include "qapi/error.h"
 #include "hw/boards.h"
 #include "hw/qdev-properties.h"
+#include "hw/qdev-clock.h"
 #include "qemu/error-report.h"
 #include "hw/arm/stm32f205_soc.h"
 #include "hw/arm/boot.h"
@@ -36,16 +37,17 @@
 static void netduino2_init(MachineState *machine)
 {
     DeviceState *dev;
+    Clock *sysclk;
 
-    /*
-     * TODO: ideally we would model the SoC RCC and let it handle
-     * system_clock_scale, including its ability to define different
-     * possible SYSCLK sources.
-     */
     system_clock_scale = NANOSECONDS_PER_SECOND / SYSCLK_FRQ;
 
+    /* This clock doesn't need migration because it is fixed-frequency */
+    sysclk = clock_new(OBJECT(machine), "SYSCLK");
+    clock_set_hz(sysclk, SYSCLK_FRQ);
+
     dev = qdev_new(TYPE_STM32F205_SOC);
     qdev_prop_set_string(dev, "cpu-type", ARM_CPU_TYPE_NAME("cortex-m3"));
+    qdev_connect_clock_in(dev, "sysclk", sysclk);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 
     armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename,
diff --git a/hw/arm/stm32f205_soc.c b/hw/arm/stm32f205_soc.c
index 0bd215aebd7..c6b75a381d9 100644
--- a/hw/arm/stm32f205_soc.c
+++ b/hw/arm/stm32f205_soc.c
@@ -29,6 +29,7 @@
 #include "exec/address-spaces.h"
 #include "hw/arm/stm32f205_soc.h"
 #include "hw/qdev-properties.h"
+#include "hw/qdev-clock.h"
 #include "sysemu/sysemu.h"
 
 /* At the moment only Timer 2 to 5 are modelled */
@@ -74,6 +75,9 @@ static void stm32f205_soc_initfn(Object *obj)
     for (i = 0; i < STM_NUM_SPIS; i++) {
         object_initialize_child(obj, "spi[*]", &s->spi[i], TYPE_STM32F2XX_SPI);
     }
+
+    s->sysclk = qdev_init_clock_in(DEVICE(s), "sysclk", NULL, NULL, 0);
+    s->refclk = qdev_init_clock_in(DEVICE(s), "refclk", NULL, NULL, 0);
 }
 
 static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp)
@@ -85,6 +89,30 @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp)
 
     MemoryRegion *system_memory = get_system_memory();
 
+    /*
+     * We use s->refclk internally and only define it with qdev_init_clock_in()
+     * so it is correctly parented and not leaked on an init/deinit; it is not
+     * intended as an externally exposed clock.
+     */
+    if (clock_has_source(s->refclk)) {
+        error_setg(errp, "refclk clock must not be wired up by the board code");
+        return;
+    }
+
+    if (!clock_has_source(s->sysclk)) {
+        error_setg(errp, "sysclk clock must be wired up by the board code");
+        return;
+    }
+
+    /*
+     * TODO: ideally we should model the SoC RCC and its ability to
+     * change the sysclk frequency and define different sysclk sources.
+     */
+
+    /* The refclk always runs at frequency HCLK / 8 */
+    clock_set_mul_div(s->refclk, 8, 1);
+    clock_set_source(s->refclk, s->sysclk);
+
     memory_region_init_rom(&s->flash, OBJECT(dev_soc), "STM32F205.flash",
                            FLASH_SIZE, &error_fatal);
     memory_region_init_alias(&s->flash_alias, OBJECT(dev_soc),
@@ -101,6 +129,8 @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp)
     qdev_prop_set_uint32(armv7m, "num-irq", 96);
     qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type);
     qdev_prop_set_bit(armv7m, "enable-bitband", true);
+    qdev_connect_clock_in(armv7m, "cpuclk", s->sysclk);
+    qdev_connect_clock_in(armv7m, "refclk", s->refclk);
     object_property_set_link(OBJECT(&s->armv7m), "memory",
                              OBJECT(get_system_memory()), &error_abort);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->armv7m), errp)) {
-- 
2.20.1