From: Vyacheslav Bocharov <adeep@lexina.in>
To: Neil Armstrong <narmstrong@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>
Cc: linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 0/4] arm64: meson: add support for JetHub D1/H1
Date: Sat, 4 Sep 2021 17:27:41 +0300 [thread overview]
Message-ID: <20210904142745.183875-1-adeep@lexina.in> (raw)
Add support for new home automation devices.
JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation controller with the following features:
- DIN Rail Mounting
- Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 512Mb/1GB LPDDR4
- 8/16GB eMMC flash
- 1 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac, Bluetooth 4.2.
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support.
- 2 x gpio LEDS
- GPIO user Button
- 1 x 1-Wire
- 2 x RS-485
- 4 x dry contact digital GPIO inputs
- 3 x relay GPIO outputs
- DC source with a voltage of 9 to 56 V / Passive POE
JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller with the following features:
- square plastic case
- Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 1GB LPDDR4
- 8/16GB eMMC flash
- 2 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0.
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support.
- MicroSD 2.x/3.x/4.x DS/HS cards.
- 1 x gpio LED
- ADC user Button
- DC source 5V microUSB
Changes from v2:
- add new vendor to vendor-prefixes
- sync board compatible dt-bindings to jethome,jethub-*
- fix efuse fields
- fix gpio-line-names
- fix spaces and blank lines
- recheck via checkpatch
Changes from v1:
- rearrange patches
- add SPDX license and copyright header
- remove attributes without bindings
- small fixes with spaces
Vyacheslav Bocharov (4):
dt-bindings: arm: amlogic: add bindings for Jethub D1/H1
dt-bindings: vendor-prefixes: add jethome prefix
arm64: dts: meson-gxl: add support for JetHub H1
arm64: dts: meson-axg: add support for JetHub D1
.../devicetree/bindings/arm/amlogic.yaml | 2 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm64/boot/dts/amlogic/Makefile | 2 +
.../amlogic/meson-axg-jethome-jethub-j100.dts | 354 ++++++++++++++++++
.../meson-gxl-s905w-jethome-jethub-j80.dts | 240 ++++++++++++
5 files changed, 600 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
--
2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Vyacheslav Bocharov <adeep@lexina.in>
To: Neil Armstrong <narmstrong@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>
Cc: linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 0/4] arm64: meson: add support for JetHub D1/H1
Date: Sat, 4 Sep 2021 17:27:41 +0300 [thread overview]
Message-ID: <20210904142745.183875-1-adeep@lexina.in> (raw)
Add support for new home automation devices.
JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation controller with the following features:
- DIN Rail Mounting
- Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 512Mb/1GB LPDDR4
- 8/16GB eMMC flash
- 1 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac, Bluetooth 4.2.
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support.
- 2 x gpio LEDS
- GPIO user Button
- 1 x 1-Wire
- 2 x RS-485
- 4 x dry contact digital GPIO inputs
- 3 x relay GPIO outputs
- DC source with a voltage of 9 to 56 V / Passive POE
JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller with the following features:
- square plastic case
- Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 1GB LPDDR4
- 8/16GB eMMC flash
- 2 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0.
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support.
- MicroSD 2.x/3.x/4.x DS/HS cards.
- 1 x gpio LED
- ADC user Button
- DC source 5V microUSB
Changes from v2:
- add new vendor to vendor-prefixes
- sync board compatible dt-bindings to jethome,jethub-*
- fix efuse fields
- fix gpio-line-names
- fix spaces and blank lines
- recheck via checkpatch
Changes from v1:
- rearrange patches
- add SPDX license and copyright header
- remove attributes without bindings
- small fixes with spaces
Vyacheslav Bocharov (4):
dt-bindings: arm: amlogic: add bindings for Jethub D1/H1
dt-bindings: vendor-prefixes: add jethome prefix
arm64: dts: meson-gxl: add support for JetHub H1
arm64: dts: meson-axg: add support for JetHub D1
.../devicetree/bindings/arm/amlogic.yaml | 2 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm64/boot/dts/amlogic/Makefile | 2 +
.../amlogic/meson-axg-jethome-jethub-j100.dts | 354 ++++++++++++++++++
.../meson-gxl-s905w-jethome-jethub-j80.dts | 240 ++++++++++++
5 files changed, 600 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
--
2.30.2
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Vyacheslav Bocharov <adeep@lexina.in>
To: Neil Armstrong <narmstrong@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>
Cc: linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 0/4] arm64: meson: add support for JetHub D1/H1
Date: Sat, 4 Sep 2021 17:27:41 +0300 [thread overview]
Message-ID: <20210904142745.183875-1-adeep@lexina.in> (raw)
Add support for new home automation devices.
JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation controller with the following features:
- DIN Rail Mounting
- Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 512Mb/1GB LPDDR4
- 8/16GB eMMC flash
- 1 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac, Bluetooth 4.2.
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support.
- 2 x gpio LEDS
- GPIO user Button
- 1 x 1-Wire
- 2 x RS-485
- 4 x dry contact digital GPIO inputs
- 3 x relay GPIO outputs
- DC source with a voltage of 9 to 56 V / Passive POE
JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller with the following features:
- square plastic case
- Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 1GB LPDDR4
- 8/16GB eMMC flash
- 2 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0.
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support.
- MicroSD 2.x/3.x/4.x DS/HS cards.
- 1 x gpio LED
- ADC user Button
- DC source 5V microUSB
Changes from v2:
- add new vendor to vendor-prefixes
- sync board compatible dt-bindings to jethome,jethub-*
- fix efuse fields
- fix gpio-line-names
- fix spaces and blank lines
- recheck via checkpatch
Changes from v1:
- rearrange patches
- add SPDX license and copyright header
- remove attributes without bindings
- small fixes with spaces
Vyacheslav Bocharov (4):
dt-bindings: arm: amlogic: add bindings for Jethub D1/H1
dt-bindings: vendor-prefixes: add jethome prefix
arm64: dts: meson-gxl: add support for JetHub H1
arm64: dts: meson-axg: add support for JetHub D1
.../devicetree/bindings/arm/amlogic.yaml | 2 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm64/boot/dts/amlogic/Makefile | 2 +
.../amlogic/meson-axg-jethome-jethub-j100.dts | 354 ++++++++++++++++++
.../meson-gxl-s905w-jethome-jethub-j80.dts | 240 ++++++++++++
5 files changed, 600 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-09-04 14:28 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-04 14:27 Vyacheslav Bocharov [this message]
2021-09-04 14:27 ` [PATCH v3 0/4] arm64: meson: add support for JetHub D1/H1 Vyacheslav Bocharov
2021-09-04 14:27 ` Vyacheslav Bocharov
2021-09-04 14:27 ` [PATCH v3 1/4] dt-bindings: arm: amlogic: add bindings for Jethub D1/H1 Vyacheslav Bocharov
2021-09-04 14:27 ` Vyacheslav Bocharov
2021-09-04 14:27 ` Vyacheslav Bocharov
2021-09-06 12:24 ` Neil Armstrong
2021-09-06 12:24 ` Neil Armstrong
2021-09-06 12:24 ` Neil Armstrong
2021-09-04 14:27 ` [PATCH v3 2/4] dt-bindings: vendor-prefixes: add jethome prefix Vyacheslav Bocharov
2021-09-04 14:27 ` Vyacheslav Bocharov
2021-09-04 14:27 ` Vyacheslav Bocharov
2021-09-04 14:27 ` [PATCH v3 3/4] arm64: dts: meson-gxl: add support for JetHub H1 Vyacheslav Bocharov
2021-09-04 14:27 ` Vyacheslav Bocharov
2021-09-04 14:27 ` Vyacheslav Bocharov
2021-09-06 12:27 ` Neil Armstrong
2021-09-06 12:27 ` Neil Armstrong
2021-09-06 12:27 ` Neil Armstrong
2021-09-04 14:27 ` [PATCH v3 4/4] arm64: dts: meson-axg: add support for JetHub D1 Vyacheslav Bocharov
2021-09-04 14:27 ` Vyacheslav Bocharov
2021-09-04 14:27 ` Vyacheslav Bocharov
2021-09-06 12:26 ` Neil Armstrong
2021-09-06 12:26 ` Neil Armstrong
2021-09-06 12:26 ` Neil Armstrong
2021-09-06 16:17 ` Vyacheslav
2021-09-06 16:17 ` Vyacheslav
2021-09-06 16:17 ` Vyacheslav
[not found] ` <c6430622-5857-877c-6293-fc101500a6e6@lexina.in>
2021-09-07 7:09 ` Neil Armstrong
2021-09-07 7:09 ` Neil Armstrong
2021-09-07 7:09 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210904142745.183875-1-adeep@lexina.in \
--to=adeep@lexina.in \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.