All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Linus Walleij <linus.walleij@linaro.org>,
	Stephen Boyd <sboyd@kernel.org>, Pavel Machek <pavel@ucw.cz>
Cc: Liviu Dudau <liviu.dudau@arm.com>,
	Sudeep Holla <sudeep.holla@arm.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-leds@vger.kernel.org
Subject: [PATCH v2 0/8] Arm boards syscon 'unit_address_format' clean-ups
Date: Mon, 13 Sep 2021 14:28:08 -0500	[thread overview]
Message-ID: <20210913192816.1225025-1-robh@kernel.org> (raw)

This series addresses the last of the dtc 'unit_address_format'
warnings in the tree.

The remaining issue was dealing with the node names on 2 bindings for
Arm Ltd boards syscon child nodes: register-bit-led and Versatile ICST.
Both of these used an offset property for register address rather than
'reg' which is the preference nowadays. With a 'reg' property, then we
can have a proper node name and unit-address. This series adds support
for using 'reg' instead and updates the node names and unit-addresses.

The dts file changes have inter-dependencies, but the clock and led
changes can go via each subsystem.

Rob


Rob Herring (8):
  dt-bindings: leds: Convert register-bit-led binding to DT schema
  dt-bindings: leds: register-bit-led: Use 'reg' instead of 'offset'
  leds: syscon: Support 'reg' in addition to 'offset' for register
    address
  dt-bindings: clock: arm,syscon-icst: Use 'reg' instead of 'vco-offset'
    for VCO register address
  clk: versatile: clk-icst: Support 'reg' in addition to 'vco-offset'
    for register address
  ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
  ARM: dts: arm: Update ICST clock nodes 'reg' and node names
  kbuild: Enable dtc 'unit_address_format' warning by default

 .../bindings/clock/arm,syscon-icst.yaml       |  5 +
 .../bindings/leds/register-bit-led.txt        | 94 ------------------
 .../bindings/leds/register-bit-led.yaml       | 95 +++++++++++++++++++
 arch/arm/boot/dts/arm-realview-eb.dtsi        | 42 +++++---
 arch/arm/boot/dts/arm-realview-pb1176.dts     | 42 +++++---
 arch/arm/boot/dts/arm-realview-pb11mp.dts     | 48 +++++++---
 arch/arm/boot/dts/arm-realview-pbx.dtsi       | 42 +++++---
 arch/arm/boot/dts/integrator.dtsi             | 23 +++--
 arch/arm/boot/dts/integratorap-im-pd1.dts     |  9 +-
 arch/arm/boot/dts/integratorap.dts            | 15 ++-
 arch/arm/boot/dts/integratorcp.dts            |  9 +-
 arch/arm/boot/dts/mps2.dtsi                   | 10 +-
 arch/arm/boot/dts/versatile-ab-ib2.dts        |  6 +-
 arch/arm/boot/dts/versatile-ab.dts            | 27 ++++--
 arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 27 ++++--
 drivers/clk/versatile/clk-icst.c              |  3 +-
 drivers/leds/leds-syscon.c                    |  3 +-
 scripts/Makefile.lib                          |  1 -
 18 files changed, 316 insertions(+), 185 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/leds/register-bit-led.txt
 create mode 100644 Documentation/devicetree/bindings/leds/register-bit-led.yaml

-- 
2.30.2


WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Linus Walleij <linus.walleij@linaro.org>,
	Stephen Boyd <sboyd@kernel.org>, Pavel Machek <pavel@ucw.cz>
Cc: Liviu Dudau <liviu.dudau@arm.com>,
	Sudeep Holla <sudeep.holla@arm.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-leds@vger.kernel.org
Subject: [PATCH v2 0/8] Arm boards syscon 'unit_address_format' clean-ups
Date: Mon, 13 Sep 2021 14:28:08 -0500	[thread overview]
Message-ID: <20210913192816.1225025-1-robh@kernel.org> (raw)

This series addresses the last of the dtc 'unit_address_format'
warnings in the tree.

The remaining issue was dealing with the node names on 2 bindings for
Arm Ltd boards syscon child nodes: register-bit-led and Versatile ICST.
Both of these used an offset property for register address rather than
'reg' which is the preference nowadays. With a 'reg' property, then we
can have a proper node name and unit-address. This series adds support
for using 'reg' instead and updates the node names and unit-addresses.

The dts file changes have inter-dependencies, but the clock and led
changes can go via each subsystem.

Rob


Rob Herring (8):
  dt-bindings: leds: Convert register-bit-led binding to DT schema
  dt-bindings: leds: register-bit-led: Use 'reg' instead of 'offset'
  leds: syscon: Support 'reg' in addition to 'offset' for register
    address
  dt-bindings: clock: arm,syscon-icst: Use 'reg' instead of 'vco-offset'
    for VCO register address
  clk: versatile: clk-icst: Support 'reg' in addition to 'vco-offset'
    for register address
  ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
  ARM: dts: arm: Update ICST clock nodes 'reg' and node names
  kbuild: Enable dtc 'unit_address_format' warning by default

 .../bindings/clock/arm,syscon-icst.yaml       |  5 +
 .../bindings/leds/register-bit-led.txt        | 94 ------------------
 .../bindings/leds/register-bit-led.yaml       | 95 +++++++++++++++++++
 arch/arm/boot/dts/arm-realview-eb.dtsi        | 42 +++++---
 arch/arm/boot/dts/arm-realview-pb1176.dts     | 42 +++++---
 arch/arm/boot/dts/arm-realview-pb11mp.dts     | 48 +++++++---
 arch/arm/boot/dts/arm-realview-pbx.dtsi       | 42 +++++---
 arch/arm/boot/dts/integrator.dtsi             | 23 +++--
 arch/arm/boot/dts/integratorap-im-pd1.dts     |  9 +-
 arch/arm/boot/dts/integratorap.dts            | 15 ++-
 arch/arm/boot/dts/integratorcp.dts            |  9 +-
 arch/arm/boot/dts/mps2.dtsi                   | 10 +-
 arch/arm/boot/dts/versatile-ab-ib2.dts        |  6 +-
 arch/arm/boot/dts/versatile-ab.dts            | 27 ++++--
 arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 27 ++++--
 drivers/clk/versatile/clk-icst.c              |  3 +-
 drivers/leds/leds-syscon.c                    |  3 +-
 scripts/Makefile.lib                          |  1 -
 18 files changed, 316 insertions(+), 185 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/leds/register-bit-led.txt
 create mode 100644 Documentation/devicetree/bindings/leds/register-bit-led.yaml

-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-09-13 19:28 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-13 19:28 Rob Herring [this message]
2021-09-13 19:28 ` [PATCH v2 0/8] Arm boards syscon 'unit_address_format' clean-ups Rob Herring
2021-09-13 19:28 ` [PATCH v2 1/8] dt-bindings: leds: Convert register-bit-led binding to DT schema Rob Herring
2021-09-13 19:28   ` Rob Herring
2021-09-13 22:41   ` Linus Walleij
2021-09-13 22:41     ` Linus Walleij
2021-09-14 16:22     ` Rob Herring
2021-09-14 16:22       ` Rob Herring
2021-10-13 22:22   ` Rob Herring
2021-10-13 22:22     ` Rob Herring
2021-09-13 19:28 ` [PATCH v2 2/8] dt-bindings: leds: register-bit-led: Use 'reg' instead of 'offset' Rob Herring
2021-09-13 19:28   ` Rob Herring
2021-10-13 22:22   ` Rob Herring
2021-10-13 22:22     ` Rob Herring
2021-09-13 19:28 ` [PATCH v2 3/8] leds: syscon: Support 'reg' in addition to 'offset' for register address Rob Herring
2021-09-13 19:28   ` Rob Herring
2021-09-13 19:28 ` [PATCH v2 4/8] dt-bindings: clock: arm,syscon-icst: Use 'reg' instead of 'vco-offset' for VCO " Rob Herring
2021-09-13 19:28   ` [PATCH v2 4/8] dt-bindings: clock: arm, syscon-icst: " Rob Herring
2021-09-14 19:58   ` [PATCH v2 4/8] dt-bindings: clock: arm,syscon-icst: " Stephen Boyd
2021-09-14 19:58     ` [PATCH v2 4/8] dt-bindings: clock: arm, syscon-icst: " Stephen Boyd
2021-09-17 23:45   ` [PATCH v2 4/8] dt-bindings: clock: arm,syscon-icst: " Linus Walleij
2021-09-17 23:45     ` Linus Walleij
2021-09-13 19:28 ` [PATCH v2 5/8] clk: versatile: clk-icst: Support 'reg' in addition to 'vco-offset' for " Rob Herring
2021-09-13 19:28   ` Rob Herring
2021-09-14 19:59   ` Stephen Boyd
2021-09-14 19:59     ` Stephen Boyd
2021-09-14 22:00     ` Rob Herring
2021-09-14 22:00       ` Rob Herring
2021-09-15  1:10       ` Stephen Boyd
2021-09-15  1:10         ` Stephen Boyd
2021-09-14 22:13   ` Linus Walleij
2021-09-14 22:13     ` Linus Walleij
2021-09-13 19:28 ` [PATCH v2 6/8] ARM: dts: arm: Update register-bit-led nodes 'reg' and node names Rob Herring
2021-09-13 19:28   ` Rob Herring
2021-10-21 21:15   ` Rob Herring
2021-10-21 21:15     ` Rob Herring
2021-10-24 23:21     ` Linus Walleij
2021-10-24 23:21       ` Linus Walleij
2021-09-13 19:28 ` [PATCH v2 7/8] ARM: dts: arm: Update ICST clock " Rob Herring
2021-09-13 19:28   ` Rob Herring
2021-09-13 19:28 ` [PATCH v2 8/8] kbuild: Enable dtc 'unit_address_format' warning by default Rob Herring
2021-09-13 19:28   ` Rob Herring
2021-09-14 15:13   ` Nick Desaulniers
2021-09-14 15:13     ` Nick Desaulniers
2021-10-04 16:23 ` [PATCH v2 0/8] Arm boards syscon 'unit_address_format' clean-ups Rob Herring
2021-10-04 16:23   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210913192816.1225025-1-robh@kernel.org \
    --to=robh@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=liviu.dudau@arm.com \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=pavel@ucw.cz \
    --cc=sboyd@kernel.org \
    --cc=sudeep.holla@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.