[PATCH AUTOSEL 4.4 1/5] xen-netback: correct success/error reporting for the SKB-with-fraglist case

[PATCH AUTOSEL 4.4 1/5] xen-netback: correct success/error reporting for the SKB-with-fraglist case

[Sasha Levin]

From: Jan Beulich <jbeulich@suse.com>

[ Upstream commit 3ede7f84c7c21f93c5eac611d60eba3f2c765e0f ]

When re-entering the main loop of xenvif_tx_check_gop() a 2nd time, the
special considerations for the head of the SKB no longer apply. Don't
mistakenly report ERROR to the frontend for the first entry in the list,
even if - from all I can tell - this shouldn't matter much as the overall
transmit will need to be considered failed anyway.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/xen-netback/netback.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index c8c6afc0ab51..15c73ebe5efc 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -994,7 +994,7 @@ static int xenvif_tx_check_gop(struct xenvif_queue *queue,
 				 * the header's copy failed, and they are
 				 * sharing a slot, send an error
 				 */
-				if (i == 0 && sharedslot)
+				if (i == 0 && !first_shinfo && sharedslot)
 					xenvif_idx_release(queue, pending_idx,
 							   XEN_NETIF_RSP_ERROR);
 				else
-- 
2.33.0

[PATCH AUTOSEL 4.4 2/5] sparc64: fix pci_iounmap() when CONFIG_PCI is not set

[Sasha Levin]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit d8b1e10a2b8efaf71d151aa756052fbf2f3b6d57 ]

Guenter reported [1] that the pci_iounmap() changes remain problematic,
with sparc64 allnoconfig and tinyconfig still not building due to the
header file changes and confusion with the arch-specific pci_iounmap()
implementation.

I'm pretty convinced that sparc should just use GENERIC_IOMAP instead of
doing its own thing, since it turns out that the sparc64 version of
pci_iounmap() is somewhat buggy (see [2]).  But in the meantime, this
just fixes the build by avoiding the trivial re-definition of the empty
case.

Link: https://lore.kernel.org/lkml/20210920134424.GA346531@roeck-us.net/ [1]
Link: https://lore.kernel.org/lkml/CAHk-=wgheheFx9myQyy5osh79BAazvmvYURAtub2gQtMvLrhqQ@mail.gmail.com/ [2]
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/lib/iomap.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/sparc/lib/iomap.c b/arch/sparc/lib/iomap.c
index c4d42a50ebc0..fa4abbaf27de 100644
--- a/arch/sparc/lib/iomap.c
+++ b/arch/sparc/lib/iomap.c
@@ -18,8 +18,10 @@ void ioport_unmap(void __iomem *addr)
 EXPORT_SYMBOL(ioport_map);
 EXPORT_SYMBOL(ioport_unmap);
 
+#ifdef CONFIG_PCI
 void pci_iounmap(struct pci_dev *dev, void __iomem * addr)
 {
 	/* nothing to do */
 }
 EXPORT_SYMBOL(pci_iounmap);
+#endif
-- 
2.33.0

[PATCH AUTOSEL 4.4 3/5] ext2: fix sleeping in atomic bugs on error

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 372d1f3e1bfede719864d0d1fbf3146b1e638c88 ]

The ext2_error() function syncs the filesystem so it sleeps.  The caller
is holding a spinlock so it's not allowed to sleep.

   ext2_statfs() <- disables preempt
   -> ext2_count_free_blocks()
      -> ext2_get_group_desc()

Fix this by using WARN() to print an error message and a stack trace
instead of using ext2_error().

Link: https://lore.kernel.org/r/20210921203233.GA16529@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext2/balloc.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/fs/ext2/balloc.c b/fs/ext2/balloc.c
index 9f9992b37924..2e4747e0aaf0 100644
--- a/fs/ext2/balloc.c
+++ b/fs/ext2/balloc.c
@@ -46,10 +46,9 @@ struct ext2_group_desc * ext2_get_group_desc(struct super_block * sb,
 	struct ext2_sb_info *sbi = EXT2_SB(sb);
 
 	if (block_group >= sbi->s_groups_count) {
-		ext2_error (sb, "ext2_get_group_desc",
-			    "block_group >= groups_count - "
-			    "block_group = %d, groups_count = %lu",
-			    block_group, sbi->s_groups_count);
+		WARN(1, "block_group >= groups_count - "
+		     "block_group = %d, groups_count = %lu",
+		     block_group, sbi->s_groups_count);
 
 		return NULL;
 	}
@@ -57,10 +56,9 @@ struct ext2_group_desc * ext2_get_group_desc(struct super_block * sb,
 	group_desc = block_group >> EXT2_DESC_PER_BLOCK_BITS(sb);
 	offset = block_group & (EXT2_DESC_PER_BLOCK(sb) - 1);
 	if (!sbi->s_group_desc[group_desc]) {
-		ext2_error (sb, "ext2_get_group_desc",
-			    "Group descriptor not loaded - "
-			    "block_group = %d, group_desc = %lu, desc = %lu",
-			     block_group, group_desc, offset);
+		WARN(1, "Group descriptor not loaded - "
+		     "block_group = %d, group_desc = %lu, desc = %lu",
+		      block_group, group_desc, offset);
 		return NULL;
 	}
 
-- 
2.33.0

[PATCH AUTOSEL 4.4 4/5] scsi: sd: Free scsi_disk device via put_device()

[Sasha Levin]

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit 265dfe8ebbabae7959060bd1c3f75c2473b697ed ]

After a device is initialized via device_initialize() it should be freed
via put_device(). sd_probe() currently gets this wrong, fix it up.

Link: https://lore.kernel.org/r/20210906090112.531442-1-ming.lei@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/sd.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 9176fb1b1615..935add4d6f83 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -3146,15 +3146,16 @@ static int sd_probe(struct device *dev)
 	}
 
 	device_initialize(&sdkp->dev);
-	sdkp->dev.parent = dev;
+	sdkp->dev.parent = get_device(dev);
 	sdkp->dev.class = &sd_disk_class;
 	dev_set_name(&sdkp->dev, "%s", dev_name(dev));
 
 	error = device_add(&sdkp->dev);
-	if (error)
-		goto out_free_index;
+	if (error) {
+		put_device(&sdkp->dev);
+		goto out;
+	}
 
-	get_device(dev);
 	dev_set_drvdata(dev, sdkp);
 
 	get_device(&sdkp->dev);	/* prevent release before async_schedule */
-- 
2.33.0

[PATCH AUTOSEL 4.4 5/5] usb: testusb: Fix for showing the connection speed

[Sasha Levin]

From: Faizel K B <faizel.kb@dicortech.com>

[ Upstream commit f81c08f897adafd2ed43f86f00207ff929f0b2eb ]

testusb' application which uses 'usbtest' driver reports 'unknown speed'
from the function 'find_testdev'. The variable 'entry->speed' was not
updated from  the application. The IOCTL mentioned in the FIXME comment can
only report whether the connection is low speed or not. Speed is read using
the IOCTL USBDEVFS_GET_SPEED which reports the proper speed grade.  The
call is implemented in the function 'handle_testdev' where the file
descriptor was availble locally. Sample output is given below where 'high
speed' is printed as the connected speed.

sudo ./testusb -a
high speed      /dev/bus/usb/001/011    0
/dev/bus/usb/001/011 test 0,    0.000015 secs
/dev/bus/usb/001/011 test 1,    0.194208 secs
/dev/bus/usb/001/011 test 2,    0.077289 secs
/dev/bus/usb/001/011 test 3,    0.170604 secs
/dev/bus/usb/001/011 test 4,    0.108335 secs
/dev/bus/usb/001/011 test 5,    2.788076 secs
/dev/bus/usb/001/011 test 6,    2.594610 secs
/dev/bus/usb/001/011 test 7,    2.905459 secs
/dev/bus/usb/001/011 test 8,    2.795193 secs
/dev/bus/usb/001/011 test 9,    8.372651 secs
/dev/bus/usb/001/011 test 10,    6.919731 secs
/dev/bus/usb/001/011 test 11,   16.372687 secs
/dev/bus/usb/001/011 test 12,   16.375233 secs
/dev/bus/usb/001/011 test 13,    2.977457 secs
/dev/bus/usb/001/011 test 14 --> 22 (Invalid argument)
/dev/bus/usb/001/011 test 17,    0.148826 secs
/dev/bus/usb/001/011 test 18,    0.068718 secs
/dev/bus/usb/001/011 test 19,    0.125992 secs
/dev/bus/usb/001/011 test 20,    0.127477 secs
/dev/bus/usb/001/011 test 21 --> 22 (Invalid argument)
/dev/bus/usb/001/011 test 24,    4.133763 secs
/dev/bus/usb/001/011 test 27,    2.140066 secs
/dev/bus/usb/001/011 test 28,    2.120713 secs
/dev/bus/usb/001/011 test 29,    0.507762 secs

Signed-off-by: Faizel K B <faizel.kb@dicortech.com>
Link: https://lore.kernel.org/r/20210902114444.15106-1-faizel.kb@dicortech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/usb/testusb.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/tools/usb/testusb.c b/tools/usb/testusb.c
index 0692d99b6d8f..18c895654e76 100644
--- a/tools/usb/testusb.c
+++ b/tools/usb/testusb.c
@@ -278,12 +278,6 @@ static int find_testdev(const char *name, const struct stat *sb, int flag)
 	}
 
 	entry->ifnum = ifnum;
-
-	/* FIXME update USBDEVFS_CONNECTINFO so it tells about high speed etc */
-
-	fprintf(stderr, "%s speed\t%s\t%u\n",
-		speed(entry->speed), entry->name, entry->ifnum);
-
 	entry->next = testdevs;
 	testdevs = entry;
 	return 0;
@@ -312,6 +306,14 @@ static void *handle_testdev (void *arg)
 		return 0;
 	}
 
+	status  =  ioctl(fd, USBDEVFS_GET_SPEED, NULL);
+	if (status < 0)
+		fprintf(stderr, "USBDEVFS_GET_SPEED failed %d\n", status);
+	else
+		dev->speed = status;
+	fprintf(stderr, "%s speed\t%s\t%u\n",
+			speed(dev->speed), dev->name, dev->ifnum);
+
 restart:
 	for (i = 0; i < TEST_CASES; i++) {
 		if (dev->test != -1 && dev->test != i)
-- 
2.33.0