[PATCH net-next 0/2] Support for the ip6ip6 encapsulation of IOAM

[PATCH net-next 0/2] Support for the ip6ip6 encapsulation of IOAM

[Justin Iurman]

In the current implementation, IOAM can only be inserted directly (i.e., only
inside packets generated locally) by default, to be compliant with RFC8200.

This patch adds support for in-transit packets and provides the ip6ip6
encapsulation of IOAM. Therefore, three explicit encap modes are defined:

 - inline: directly inserts IOAM inside packets.

 - encap:  ip6ip6 encapsulation of IOAM inside packets.

 - auto:   either inline mode for packets generated locally or encap mode for
           in-transit packets.

With current iproute2 implementation, it is configured this way:

$ ip -6 r [...] encap ioam6 trace prealloc type 0x800000 ns 1 size 12 [...]

Now, an encap mode must be specified:

(inline mode)
$ [...] encap ioam6 mode inline trace prealloc [...]

(encap mode)
$ [...] encap ioam6 mode encap tundst fc00::2 trace prealloc [...]

(auto mode)
$ [...] encap ioam6 mode auto tundst fc00::2 trace prealloc [...]

A tunnel destination address must be configured when using the encap mode or the
auto mode.

Justin Iurman (2):
  ipv6: ioam: Add support for the ip6ip6 encapsulation
  selftests: net: Test for the IOAM encapsulation with IPv6

 include/net/ioam6.h                  |   3 +-
 include/uapi/linux/ioam6_iptunnel.h  |  19 +-
 net/ipv6/Kconfig                     |   6 +-
 net/ipv6/exthdrs.c                   |   2 +-
 net/ipv6/ioam6.c                     |  11 +-
 net/ipv6/ioam6_iptunnel.c            | 299 ++++++++++++++++++++-------
 tools/testing/selftests/net/ioam6.sh | 209 ++++++++++++++-----
 7 files changed, 409 insertions(+), 140 deletions(-)

-- 
2.25.1

[PATCH net-next 1/2] ipv6: ioam: Add support for the ip6ip6 encapsulation

[Justin Iurman]

This patch adds support for the ip6ip6 encapsulation by providing three encap
modes: inline, encap and auto.

Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
---
 include/net/ioam6.h                 |   3 +-
 include/uapi/linux/ioam6_iptunnel.h |  19 +-
 net/ipv6/Kconfig                    |   6 +-
 net/ipv6/exthdrs.c                  |   2 +-
 net/ipv6/ioam6.c                    |  11 +-
 net/ipv6/ioam6_iptunnel.c           | 299 ++++++++++++++++++++--------
 6 files changed, 250 insertions(+), 90 deletions(-)

diff --git a/include/net/ioam6.h b/include/net/ioam6.h
index 3c2993bc48c8..3f45ba37a2c6 100644
--- a/include/net/ioam6.h
+++ b/include/net/ioam6.h
@@ -56,7 +56,8 @@ static inline struct ioam6_pernet_data *ioam6_pernet(struct net *net)
 struct ioam6_namespace *ioam6_namespace(struct net *net, __be16 id);
 void ioam6_fill_trace_data(struct sk_buff *skb,
 			   struct ioam6_namespace *ns,
-			   struct ioam6_trace_hdr *trace);
+			   struct ioam6_trace_hdr *trace,
+			   bool is_input);
 
 int ioam6_init(void);
 void ioam6_exit(void);
diff --git a/include/uapi/linux/ioam6_iptunnel.h b/include/uapi/linux/ioam6_iptunnel.h
index bae14636a8c8..4fb7e78018b5 100644
--- a/include/uapi/linux/ioam6_iptunnel.h
+++ b/include/uapi/linux/ioam6_iptunnel.h
@@ -9,9 +9,26 @@
 #ifndef _UAPI_LINUX_IOAM6_IPTUNNEL_H
 #define _UAPI_LINUX_IOAM6_IPTUNNEL_H
 
+#include <linux/in6.h>
+#include <linux/ioam6.h>
+#include <linux/types.h>
+
+enum {
+	IOAM6_IPTUNNEL_MODE_UNSPEC,
+	IOAM6_IPTUNNEL_MODE_INLINE,	/* direct insertion only */
+	IOAM6_IPTUNNEL_MODE_ENCAP,	/* encap (ip6ip6) only */
+	IOAM6_IPTUNNEL_MODE_AUTO,	/* inline or encap based on situation */
+};
+
+struct ioam6_iptunnel_trace {
+	__u8 mode;
+	struct in6_addr tundst;	/* unused for inline mode */
+	struct ioam6_trace_hdr trace;
+};
+
 enum {
 	IOAM6_IPTUNNEL_UNSPEC,
-	IOAM6_IPTUNNEL_TRACE,		/* struct ioam6_trace_hdr */
+	IOAM6_IPTUNNEL_TRACE,
 	__IOAM6_IPTUNNEL_MAX,
 };
 
diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig
index e504204bca92..bf2e5e5fe142 100644
--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
@@ -332,10 +332,10 @@ config IPV6_IOAM6_LWTUNNEL
 	bool "IPv6: IOAM Pre-allocated Trace insertion support"
 	depends on IPV6
 	select LWTUNNEL
+	select DST_CACHE
 	help
-	  Support for the inline insertion of IOAM Pre-allocated
-	  Trace Header (only on locally generated packets), using
-	  the lightweight tunnels mechanism.
+	  Support for the insertion of IOAM Pre-allocated Trace
+	  Header using the lightweight tunnels mechanism.
 
 	  If unsure, say N.
 
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index 3a871a09f962..38ece3b7b839 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -979,7 +979,7 @@ static bool ipv6_hop_ioam(struct sk_buff *skb, int optoff)
 		if (!skb_valid_dst(skb))
 			ip6_route_input(skb);
 
-		ioam6_fill_trace_data(skb, ns, trace);
+		ioam6_fill_trace_data(skb, ns, trace, true);
 		break;
 	default:
 		break;
diff --git a/net/ipv6/ioam6.c b/net/ipv6/ioam6.c
index 5e8961004832..4e5583dbadac 100644
--- a/net/ipv6/ioam6.c
+++ b/net/ipv6/ioam6.c
@@ -631,7 +631,7 @@ static void __ioam6_fill_trace_data(struct sk_buff *skb,
 				    struct ioam6_namespace *ns,
 				    struct ioam6_trace_hdr *trace,
 				    struct ioam6_schema *sc,
-				    u8 sclen)
+				    u8 sclen, bool is_input)
 {
 	struct __kernel_sock_timeval ts;
 	u64 raw64;
@@ -645,7 +645,7 @@ static void __ioam6_fill_trace_data(struct sk_buff *skb,
 	/* hop_lim and node_id */
 	if (trace->type.bit0) {
 		byte = ipv6_hdr(skb)->hop_limit;
-		if (skb->dev)
+		if (is_input)
 			byte--;
 
 		raw32 = dev_net(skb_dst(skb)->dev)->ipv6.sysctl.ioam6_id;
@@ -730,7 +730,7 @@ static void __ioam6_fill_trace_data(struct sk_buff *skb,
 	/* hop_lim and node_id (wide) */
 	if (trace->type.bit8) {
 		byte = ipv6_hdr(skb)->hop_limit;
-		if (skb->dev)
+		if (is_input)
 			byte--;
 
 		raw64 = dev_net(skb_dst(skb)->dev)->ipv6.sysctl.ioam6_id_wide;
@@ -786,7 +786,8 @@ static void __ioam6_fill_trace_data(struct sk_buff *skb,
 /* called with rcu_read_lock() */
 void ioam6_fill_trace_data(struct sk_buff *skb,
 			   struct ioam6_namespace *ns,
-			   struct ioam6_trace_hdr *trace)
+			   struct ioam6_trace_hdr *trace,
+			   bool is_input)
 {
 	struct ioam6_schema *sc;
 	u8 sclen = 0;
@@ -822,7 +823,7 @@ void ioam6_fill_trace_data(struct sk_buff *skb,
 		return;
 	}
 
-	__ioam6_fill_trace_data(skb, ns, trace, sc, sclen);
+	__ioam6_fill_trace_data(skb, ns, trace, sc, sclen, is_input);
 	trace->remlen -= trace->nodelen + sclen;
 }
 
diff --git a/net/ipv6/ioam6_iptunnel.c b/net/ipv6/ioam6_iptunnel.c
index f9ee04541c17..923a5aedad9e 100644
--- a/net/ipv6/ioam6_iptunnel.c
+++ b/net/ipv6/ioam6_iptunnel.c
@@ -17,18 +17,25 @@
 #include <net/sock.h>
 #include <net/lwtunnel.h>
 #include <net/ioam6.h>
+#include <net/ipv6.h>
+#include <net/dst_cache.h>
+#include <net/ip6_route.h>
+#include <net/addrconf.h>
 
 #define IOAM6_MASK_SHORT_FIELDS 0xff100000
 #define IOAM6_MASK_WIDE_FIELDS 0xe00000
 
 struct ioam6_lwt_encap {
-	struct ipv6_hopopt_hdr	eh;
-	u8			pad[2];	/* 2-octet padding for 4n-alignment */
-	struct ioam6_hdr	ioamh;
-	struct ioam6_trace_hdr	traceh;
+	struct ipv6_hopopt_hdr eh;
+	u8 pad[2];			/* 2-octet padding for 4n-alignment */
+	struct ioam6_hdr ioamh;
+	struct ioam6_trace_hdr traceh;
 } __packed;
 
 struct ioam6_lwt {
+	u8 mode;
+	struct in6_addr tundst;
+	struct dst_cache cache;
 	struct ioam6_lwt_encap	tuninfo;
 };
 
@@ -42,34 +49,15 @@ static struct ioam6_lwt_encap *ioam6_lwt_info(struct lwtunnel_state *lwt)
 	return &ioam6_lwt_state(lwt)->tuninfo;
 }
 
-static struct ioam6_trace_hdr *ioam6_trace(struct lwtunnel_state *lwt)
+static struct ioam6_trace_hdr *ioam6_lwt_trace(struct lwtunnel_state *lwt)
 {
 	return &(ioam6_lwt_state(lwt)->tuninfo.traceh);
 }
 
 static const struct nla_policy ioam6_iptunnel_policy[IOAM6_IPTUNNEL_MAX + 1] = {
-	[IOAM6_IPTUNNEL_TRACE]	= NLA_POLICY_EXACT_LEN(sizeof(struct ioam6_trace_hdr)),
+	[IOAM6_IPTUNNEL_TRACE]	= NLA_POLICY_EXACT_LEN(sizeof(struct ioam6_iptunnel_trace)),
 };
 
-static int nla_put_ioam6_trace(struct sk_buff *skb, int attrtype,
-			       struct ioam6_trace_hdr *trace)
-{
-	struct ioam6_trace_hdr *data;
-	struct nlattr *nla;
-	int len;
-
-	len = sizeof(*trace);
-
-	nla = nla_reserve(skb, attrtype, len);
-	if (!nla)
-		return -EMSGSIZE;
-
-	data = nla_data(nla);
-	memcpy(data, trace, len);
-
-	return 0;
-}
-
 static bool ioam6_validate_trace_hdr(struct ioam6_trace_hdr *trace)
 {
 	u32 fields;
@@ -95,11 +83,12 @@ static int ioam6_build_state(struct net *net, struct nlattr *nla,
 			     struct netlink_ext_ack *extack)
 {
 	struct nlattr *tb[IOAM6_IPTUNNEL_MAX + 1];
-	struct ioam6_lwt_encap *tuninfo;
+	struct ioam6_iptunnel_trace *data;
 	struct ioam6_trace_hdr *trace;
+	struct ioam6_lwt_encap *info;
 	struct lwtunnel_state *s;
-	int len_aligned;
-	int len, err;
+	struct ioam6_lwt *lwt;
+	int len, aligned, err;
 
 	if (family != AF_INET6)
 		return -EINVAL;
@@ -114,36 +103,59 @@ static int ioam6_build_state(struct net *net, struct nlattr *nla,
 		return -EINVAL;
 	}
 
-	trace = nla_data(tb[IOAM6_IPTUNNEL_TRACE]);
-	if (!ioam6_validate_trace_hdr(trace)) {
+	data = nla_data(tb[IOAM6_IPTUNNEL_TRACE]);
+	if (!ioam6_validate_trace_hdr(&data->trace)) {
 		NL_SET_ERR_MSG_ATTR(extack, tb[IOAM6_IPTUNNEL_TRACE],
 				    "invalid trace validation");
 		return -EINVAL;
 	}
 
-	len = sizeof(*tuninfo) + trace->remlen * 4;
-	len_aligned = ALIGN(len, 8);
+	switch (data->mode) {
+	case IOAM6_IPTUNNEL_MODE_INLINE:
+	case IOAM6_IPTUNNEL_MODE_ENCAP:
+	case IOAM6_IPTUNNEL_MODE_AUTO:
+		break;
+	default:
+		NL_SET_ERR_MSG_ATTR(extack, tb[IOAM6_IPTUNNEL_TRACE],
+				    "invalid mode");
+		return -EINVAL;
+	}
+
+	len = sizeof(*info) + data->trace.remlen * 4;
+	aligned = ALIGN(len, 8);
 
-	s = lwtunnel_state_alloc(len_aligned);
+	s = lwtunnel_state_alloc(aligned + sizeof(*lwt) - sizeof(*info));
 	if (!s)
 		return -ENOMEM;
 
-	tuninfo = ioam6_lwt_info(s);
-	tuninfo->eh.hdrlen = (len_aligned >> 3) - 1;
-	tuninfo->pad[0] = IPV6_TLV_PADN;
-	tuninfo->ioamh.type = IOAM6_TYPE_PREALLOC;
-	tuninfo->ioamh.opt_type = IPV6_TLV_IOAM;
-	tuninfo->ioamh.opt_len = sizeof(tuninfo->ioamh) - 2 + sizeof(*trace)
-					+ trace->remlen * 4;
+	lwt = ioam6_lwt_state(s);
+	lwt->mode = data->mode;
+	if (lwt->mode != IOAM6_IPTUNNEL_MODE_INLINE)
+		memcpy(&lwt->tundst, &data->tundst, sizeof(lwt->tundst));
+
+	err = dst_cache_init(&lwt->cache, GFP_ATOMIC);
+	if (err) {
+		kfree(s);
+		return err;
+	}
+
+	trace = ioam6_lwt_trace(s);
+	memcpy(trace, &data->trace, sizeof(*trace));
 
-	memcpy(&tuninfo->traceh, trace, sizeof(*trace));
+	info = ioam6_lwt_info(s);
+	info->eh.hdrlen = (aligned >> 3) - 1;
+	info->pad[0] = IPV6_TLV_PADN;
+	info->ioamh.type = IOAM6_TYPE_PREALLOC;
+	info->ioamh.opt_type = IPV6_TLV_IOAM;
+	info->ioamh.opt_len = sizeof(info->ioamh) - 2;
+	info->ioamh.opt_len += sizeof(*trace) + trace->remlen * 4;
 
-	len = len_aligned - len;
+	len = aligned - len;
 	if (len == 1) {
-		tuninfo->traceh.data[trace->remlen * 4] = IPV6_TLV_PAD1;
+		trace->data[trace->remlen * 4] = IPV6_TLV_PAD1;
 	} else if (len > 0) {
-		tuninfo->traceh.data[trace->remlen * 4] = IPV6_TLV_PADN;
-		tuninfo->traceh.data[trace->remlen * 4 + 1] = len - 2;
+		trace->data[trace->remlen * 4] = IPV6_TLV_PADN;
+		trace->data[trace->remlen * 4 + 1] = len - 2;
 	}
 
 	s->type = LWTUNNEL_ENCAP_IOAM6;
@@ -154,11 +166,26 @@ static int ioam6_build_state(struct net *net, struct nlattr *nla,
 	return 0;
 }
 
-static int ioam6_do_inline(struct sk_buff *skb, struct ioam6_lwt_encap *tuninfo)
+static int ioam6_do_fill(struct net *net, struct sk_buff *skb)
 {
 	struct ioam6_trace_hdr *trace;
-	struct ipv6hdr *oldhdr, *hdr;
 	struct ioam6_namespace *ns;
+
+	trace = (struct ioam6_trace_hdr *)(skb_transport_header(skb)
+					   + sizeof(struct ipv6_hopopt_hdr) + 2
+					   + sizeof(struct ioam6_hdr));
+
+	ns = ioam6_namespace(net, trace->namespace_id);
+	if (ns)
+		ioam6_fill_trace_data(skb, ns, trace, false);
+
+	return 0;
+}
+
+static int ioam6_do_inline(struct net *net, struct sk_buff *skb,
+			   struct ioam6_lwt_encap *tuninfo)
+{
+	struct ipv6hdr *oldhdr, *hdr;
 	int hdrlen, err;
 
 	hdrlen = (tuninfo->eh.hdrlen + 1) << 3;
@@ -187,80 +214,194 @@ static int ioam6_do_inline(struct sk_buff *skb, struct ioam6_lwt_encap *tuninfo)
 	hdr->nexthdr = NEXTHDR_HOP;
 	hdr->payload_len = cpu_to_be16(skb->len - sizeof(*hdr));
 
-	trace = (struct ioam6_trace_hdr *)(skb_transport_header(skb)
-					   + sizeof(struct ipv6_hopopt_hdr) + 2
-					   + sizeof(struct ioam6_hdr));
+	return ioam6_do_fill(net, skb);
+}
 
-	ns = ioam6_namespace(dev_net(skb_dst(skb)->dev), trace->namespace_id);
-	if (ns)
-		ioam6_fill_trace_data(skb, ns, trace);
+static int ioam6_do_encap(struct net *net, struct sk_buff *skb,
+			  struct ioam6_lwt_encap *tuninfo,
+			  struct in6_addr *tundst)
+{
+	struct dst_entry *dst = skb_dst(skb);
+	struct ipv6hdr *hdr, *inner_hdr;
+	int hdrlen, len, err;
 
-	return 0;
+	hdrlen = (tuninfo->eh.hdrlen + 1) << 3;
+	len = sizeof(*hdr) + hdrlen;
+
+	err = skb_cow_head(skb, len + skb->mac_len);
+	if (unlikely(err))
+		return err;
+
+	inner_hdr = ipv6_hdr(skb);
+
+	skb_push(skb, len);
+	skb_reset_network_header(skb);
+	skb_mac_header_rebuild(skb);
+	skb_set_transport_header(skb, sizeof(*hdr));
+
+	tuninfo->eh.nexthdr = NEXTHDR_IPV6;
+	memcpy(skb_transport_header(skb), (u8 *)tuninfo, hdrlen);
+
+	hdr = ipv6_hdr(skb);
+	memcpy(hdr, inner_hdr, sizeof(*hdr));
+
+	hdr->nexthdr = NEXTHDR_HOP;
+	hdr->payload_len = cpu_to_be16(skb->len - sizeof(*hdr));
+	hdr->daddr = *tundst;
+	ipv6_dev_get_saddr(net, dst->dev, &hdr->daddr,
+			   IPV6_PREFER_SRC_PUBLIC, &hdr->saddr);
+
+	skb_postpush_rcsum(skb, hdr, len);
+
+	return ioam6_do_fill(net, skb);
 }
 
 static int ioam6_output(struct net *net, struct sock *sk, struct sk_buff *skb)
 {
-	struct lwtunnel_state *lwt = skb_dst(skb)->lwtstate;
+	struct dst_entry *dst = skb_dst(skb);
+	struct in6_addr daddr_prev;
+	struct ioam6_lwt *lwt;
 	int err = -EINVAL;
 
+	lwt = ioam6_lwt_state(dst->lwtstate);
+
 	if (skb->protocol != htons(ETH_P_IPV6))
 		goto drop;
 
-	/* Only for packets we send and
-	 * that do not contain a Hop-by-Hop yet
-	 */
-	if (skb->dev || ipv6_hdr(skb)->nexthdr == NEXTHDR_HOP)
-		goto out;
-
-	err = ioam6_do_inline(skb, ioam6_lwt_info(lwt));
-	if (unlikely(err))
+	daddr_prev = ipv6_hdr(skb)->daddr;
+
+	switch (lwt->mode) {
+	case IOAM6_IPTUNNEL_MODE_INLINE:
+do_inline:
+		/* Direct insertion - if there is no Hop-by-Hop yet */
+		if (ipv6_hdr(skb)->nexthdr == NEXTHDR_HOP)
+			goto out;
+
+		err = ioam6_do_inline(net, skb, &lwt->tuninfo);
+		if (unlikely(err))
+			goto drop;
+
+		break;
+	case IOAM6_IPTUNNEL_MODE_ENCAP:
+do_encap:
+		/* Encapsulation (ip6ip6) */
+		err = ioam6_do_encap(net, skb, &lwt->tuninfo, &lwt->tundst);
+		if (unlikely(err))
+			goto drop;
+
+		break;
+	case IOAM6_IPTUNNEL_MODE_AUTO:
+		/* Automatic (RFC8200 compliant):
+		 *  - local packet -> INLINE mode
+		 *  - forwarded packet -> ENCAP mode
+		 */
+		if (!skb->dev)
+			goto do_inline;
+
+		goto do_encap;
+	default:
 		goto drop;
+	}
 
-	err = skb_cow_head(skb, LL_RESERVED_SPACE(skb_dst(skb)->dev));
+	err = skb_cow_head(skb, LL_RESERVED_SPACE(dst->dev));
 	if (unlikely(err))
 		goto drop;
 
+	if (!ipv6_addr_equal(&daddr_prev, &ipv6_hdr(skb)->daddr)) {
+		preempt_disable();
+		dst = dst_cache_get(&lwt->cache);
+		preempt_enable();
+
+		if (unlikely(!dst)) {
+			struct ipv6hdr *hdr = ipv6_hdr(skb);
+			struct flowi6 fl6;
+
+			memset(&fl6, 0, sizeof(fl6));
+			fl6.daddr = hdr->daddr;
+			fl6.saddr = hdr->saddr;
+			fl6.flowlabel = ip6_flowinfo(hdr);
+			fl6.flowi6_mark = skb->mark;
+			fl6.flowi6_proto = hdr->nexthdr;
+
+			dst = ip6_route_output(net, NULL, &fl6);
+			if (dst->error) {
+				err = dst->error;
+				dst_release(dst);
+				goto drop;
+			}
+
+			preempt_disable();
+			dst_cache_set_ip6(&lwt->cache, dst, &fl6.saddr);
+			preempt_enable();
+		}
+
+		skb_dst_drop(skb);
+		skb_dst_set(skb, dst);
+
+		return dst_output(net, sk, skb);
+	}
 out:
-	return lwt->orig_output(net, sk, skb);
-
+	return dst->lwtstate->orig_output(net, sk, skb);
 drop:
 	kfree_skb(skb);
 	return err;
 }
 
+static void ioam6_destroy_state(struct lwtunnel_state *lwt)
+{
+	dst_cache_destroy(&ioam6_lwt_state(lwt)->cache);
+}
+
 static int ioam6_fill_encap_info(struct sk_buff *skb,
 				 struct lwtunnel_state *lwtstate)
 {
-	struct ioam6_trace_hdr *trace = ioam6_trace(lwtstate);
+	struct ioam6_iptunnel_trace *info;
+	struct ioam6_trace_hdr *trace;
+	struct ioam6_lwt *lwt;
+	struct nlattr *nla;
 
-	if (nla_put_ioam6_trace(skb, IOAM6_IPTUNNEL_TRACE, trace))
+	nla = nla_reserve(skb, IOAM6_IPTUNNEL_TRACE, sizeof(*info));
+	if (!nla)
 		return -EMSGSIZE;
 
+	lwt = ioam6_lwt_state(lwtstate);
+	trace = ioam6_lwt_trace(lwtstate);
+
+	info = nla_data(nla);
+	info->mode = lwt->mode;
+	memcpy(&info->trace, trace, sizeof(*trace));
+	if (info->mode != IOAM6_IPTUNNEL_MODE_INLINE)
+		memcpy(&info->tundst, &lwt->tundst, sizeof(lwt->tundst));
+
 	return 0;
 }
 
 static int ioam6_encap_nlsize(struct lwtunnel_state *lwtstate)
 {
-	struct ioam6_trace_hdr *trace = ioam6_trace(lwtstate);
-
-	return nla_total_size(sizeof(*trace));
+	return nla_total_size(sizeof(struct ioam6_iptunnel_trace));
 }
 
 static int ioam6_encap_cmp(struct lwtunnel_state *a, struct lwtunnel_state *b)
 {
-	struct ioam6_trace_hdr *a_hdr = ioam6_trace(a);
-	struct ioam6_trace_hdr *b_hdr = ioam6_trace(b);
-
-	return (a_hdr->namespace_id != b_hdr->namespace_id);
+	struct ioam6_trace_hdr *trace_a = ioam6_lwt_trace(a);
+	struct ioam6_trace_hdr *trace_b = ioam6_lwt_trace(b);
+	struct ioam6_lwt *lwt_a = ioam6_lwt_state(a);
+	struct ioam6_lwt *lwt_b = ioam6_lwt_state(b);
+
+	return (lwt_a->mode != lwt_b->mode ||
+		(lwt_a->mode != IOAM6_IPTUNNEL_MODE_INLINE &&
+		 !ipv6_addr_equal(&lwt_a->tundst, &lwt_b->tundst)) ||
+		trace_a->namespace_id != trace_b->namespace_id);
 }
 
 static const struct lwtunnel_encap_ops ioam6_iptun_ops = {
-	.build_state	= ioam6_build_state,
+	.build_state		= ioam6_build_state,
+	.destroy_state		= ioam6_destroy_state,
 	.output		= ioam6_output,
-	.fill_encap	= ioam6_fill_encap_info,
+	.fill_encap		= ioam6_fill_encap_info,
 	.get_encap_size	= ioam6_encap_nlsize,
-	.cmp_encap	= ioam6_encap_cmp,
-	.owner		= THIS_MODULE,
+	.cmp_encap		= ioam6_encap_cmp,
+	.owner			= THIS_MODULE,
 };
 
 int __init ioam6_iptunnel_init(void)
-- 
2.25.1

Re: [PATCH net-next 1/2] ipv6: ioam: Add support for the ip6ip6 encapsulation

[David Ahern]

On 9/28/21 1:03 PM, Justin Iurman wrote:
> @@ -42,34 +49,15 @@ static struct ioam6_lwt_encap *ioam6_lwt_info(struct lwtunnel_state *lwt)
>  	return &ioam6_lwt_state(lwt)->tuninfo;
>  }
>  
> -static struct ioam6_trace_hdr *ioam6_trace(struct lwtunnel_state *lwt)
> +static struct ioam6_trace_hdr *ioam6_lwt_trace(struct lwtunnel_state *lwt)
>  {
>  	return &(ioam6_lwt_state(lwt)->tuninfo.traceh);
>  }
>  
>  static const struct nla_policy ioam6_iptunnel_policy[IOAM6_IPTUNNEL_MAX + 1] = {
> -	[IOAM6_IPTUNNEL_TRACE]	= NLA_POLICY_EXACT_LEN(sizeof(struct ioam6_trace_hdr)),
> +	[IOAM6_IPTUNNEL_TRACE]	= NLA_POLICY_EXACT_LEN(sizeof(struct ioam6_iptunnel_trace)),

you can't do that. Once a kernel is released with a given UAPI, it can
not be changed. You could go the other way and handle

struct ioam6_iptunnel_trace {
+	struct ioam6_trace_hdr trace;
+	__u8 mode;
+	struct in6_addr tundst;	/* unused for inline mode */
+};

Also, no gaps in uapi. Make sure all holes are stated; an anonymous
entry is best.


>  };
>  
> -static int nla_put_ioam6_trace(struct sk_buff *skb, int attrtype,
> -			       struct ioam6_trace_hdr *trace)
> -{
> -	struct ioam6_trace_hdr *data;
> -	struct nlattr *nla;
> -	int len;
> -
> -	len = sizeof(*trace);
> -
> -	nla = nla_reserve(skb, attrtype, len);
> -	if (!nla)
> -		return -EMSGSIZE;
> -
> -	data = nla_data(nla);
> -	memcpy(data, trace, len);
> -
> -	return 0;
> -}
> -

quite a bit of the change seems like refactoring from existing feature
to allow the new ones. Please submit refactoring changes as a
prerequisite patch. The patch that introduces your new feature should be
focused solely on what is needed to implement that feature.

Re: [PATCH net-next 1/2] ipv6: ioam: Add support for the ip6ip6 encapsulation

[Justin Iurman]

>>  static const struct nla_policy ioam6_iptunnel_policy[IOAM6_IPTUNNEL_MAX + 1] = {
>> -	[IOAM6_IPTUNNEL_TRACE]	= NLA_POLICY_EXACT_LEN(sizeof(struct ioam6_trace_hdr)),
>> +	[IOAM6_IPTUNNEL_TRACE]	= NLA_POLICY_EXACT_LEN(sizeof(struct
>> ioam6_iptunnel_trace)),
> 
> you can't do that. Once a kernel is released with a given UAPI, it can
> not be changed. You could go the other way and handle
> 
> struct ioam6_iptunnel_trace {
> +	struct ioam6_trace_hdr trace;
> +	__u8 mode;
> +	struct in6_addr tundst;	/* unused for inline mode */
> +};

Makes sense. But I'm not sure what you mean by "go the other way". Should I handle ioam6_iptunnel_trace as well, in addition to ioam6_trace_hdr, so that the uapi is backward compatible?

> Also, no gaps in uapi. Make sure all holes are stated; an anonymous
> entry is best.

Would something like this do the trick?

struct ioam6_iptunnel_trace {
	struct ioam6_trace_hdr trace;
	__u8 mode;
	union { /* anonymous field only used by both the encap and auto modes */
		struct in6_addr tundst;
	};
};

>>  };
>>  
>> -static int nla_put_ioam6_trace(struct sk_buff *skb, int attrtype,
>> -			       struct ioam6_trace_hdr *trace)
>> -{
>> -	struct ioam6_trace_hdr *data;
>> -	struct nlattr *nla;
>> -	int len;
>> -
>> -	len = sizeof(*trace);
>> -
>> -	nla = nla_reserve(skb, attrtype, len);
>> -	if (!nla)
>> -		return -EMSGSIZE;
>> -
>> -	data = nla_data(nla);
>> -	memcpy(data, trace, len);
>> -
>> -	return 0;
>> -}
>> -
> 
> quite a bit of the change seems like refactoring from existing feature
> to allow the new ones. Please submit refactoring changes as a
> prerequisite patch. The patch that introduces your new feature should be
> focused solely on what is needed to implement that feature.

+1, will do.

Re: [PATCH net-next 1/2] ipv6: ioam: Add support for the ip6ip6 encapsulation

[David Ahern]

On 9/30/21 9:19 AM, Justin Iurman wrote:
>>>  static const struct nla_policy ioam6_iptunnel_policy[IOAM6_IPTUNNEL_MAX + 1] = {
>>> -	[IOAM6_IPTUNNEL_TRACE]	= NLA_POLICY_EXACT_LEN(sizeof(struct ioam6_trace_hdr)),
>>> +	[IOAM6_IPTUNNEL_TRACE]	= NLA_POLICY_EXACT_LEN(sizeof(struct
>>> ioam6_iptunnel_trace)),
>>
>> you can't do that. Once a kernel is released with a given UAPI, it can
>> not be changed. You could go the other way and handle
>>
>> struct ioam6_iptunnel_trace {
>> +	struct ioam6_trace_hdr trace;
>> +	__u8 mode;
>> +	struct in6_addr tundst;	/* unused for inline mode */
>> +};
> 
> Makes sense. But I'm not sure what you mean by "go the other way". Should I handle ioam6_iptunnel_trace as well, in addition to ioam6_trace_hdr, so that the uapi is backward compatible?

by "the other way" I meant let ioam6_trace_hdr be the top element in the
new ioam6_iptunnel_trace struct. If the IOAM6_IPTUNNEL_TRACE size ==
ioam6_trace_hdr then you know it is the legacy argument vs sizeof
ioam6_iptunnel_trace which is the new.

> 
>> Also, no gaps in uapi. Make sure all holes are stated; an anonymous
>> entry is best.
> 
> Would something like this do the trick?
> 
> struct ioam6_iptunnel_trace {
> 	struct ioam6_trace_hdr trace;
> 	__u8 mode;
> 	union { /* anonymous field only used by both the encap and auto modes */
> 		struct in6_addr tundst;
> 	};
> };

By anonymous filling of the holes I meant something like:

struct ioam6_iptunnel_trace {
	struct ioam6_trace_hdr trace;
	__u8 mode;
	__u8 :8;
	__u16 :16;

	struct in6_addr tundst;
};

Use pahole to check that struct for proper alignment of the entries as
desired (4-byte or 8-byte aligned).

> 
>>>  };
>>>  
>>> -static int nla_put_ioam6_trace(struct sk_buff *skb, int attrtype,
>>> -			       struct ioam6_trace_hdr *trace)
>>> -{
>>> -	struct ioam6_trace_hdr *data;
>>> -	struct nlattr *nla;
>>> -	int len;
>>> -
>>> -	len = sizeof(*trace);
>>> -
>>> -	nla = nla_reserve(skb, attrtype, len);
>>> -	if (!nla)
>>> -		return -EMSGSIZE;
>>> -
>>> -	data = nla_data(nla);
>>> -	memcpy(data, trace, len);
>>> -
>>> -	return 0;
>>> -}
>>> -
>>
>> quite a bit of the change seems like refactoring from existing feature
>> to allow the new ones. Please submit refactoring changes as a
>> prerequisite patch. The patch that introduces your new feature should be
>> focused solely on what is needed to implement that feature.
> 
> +1, will do.
> 

Re: [PATCH net-next 1/2] ipv6: ioam: Add support for the ip6ip6 encapsulation

[Justin Iurman]

>>>>  static const struct nla_policy ioam6_iptunnel_policy[IOAM6_IPTUNNEL_MAX + 1] = {
>>>> -	[IOAM6_IPTUNNEL_TRACE]	= NLA_POLICY_EXACT_LEN(sizeof(struct ioam6_trace_hdr)),
>>>> +	[IOAM6_IPTUNNEL_TRACE]	= NLA_POLICY_EXACT_LEN(sizeof(struct
>>>> ioam6_iptunnel_trace)),
>>>
>>> you can't do that. Once a kernel is released with a given UAPI, it can
>>> not be changed. You could go the other way and handle
>>>
>>> struct ioam6_iptunnel_trace {
>>> +	struct ioam6_trace_hdr trace;
>>> +	__u8 mode;
>>> +	struct in6_addr tundst;	/* unused for inline mode */
>>> +};
>> 
>> Makes sense. But I'm not sure what you mean by "go the other way". Should I
>> handle ioam6_iptunnel_trace as well, in addition to ioam6_trace_hdr, so that
>> the uapi is backward compatible?
> 
> by "the other way" I meant let ioam6_trace_hdr be the top element in the
> new ioam6_iptunnel_trace struct. If the IOAM6_IPTUNNEL_TRACE size ==
> ioam6_trace_hdr then you know it is the legacy argument vs sizeof
> ioam6_iptunnel_trace which is the new.

OK, I see. The problem is ioam6_trace_hdr must be the last entry because of its last field, which is "__u8 data[0]". But, anyway, I could still apply the same kind of logic with the size.

>>> Also, no gaps in uapi. Make sure all holes are stated; an anonymous
>>> entry is best.
>> 
>> Would something like this do the trick?
>> 
>> struct ioam6_iptunnel_trace {
>> 	struct ioam6_trace_hdr trace;
>> 	__u8 mode;
>> 	union { /* anonymous field only used by both the encap and auto modes */
>> 		struct in6_addr tundst;
>> 	};
>> };
> 
> By anonymous filling of the holes I meant something like:
> 
> struct ioam6_iptunnel_trace {
>	struct ioam6_trace_hdr trace;
>	__u8 mode;
>	__u8 :8;
>	__u16 :16;
> 
>	struct in6_addr tundst;
> };
> 
> Use pahole to check that struct for proper alignment of the entries as
> desired (4-byte or 8-byte aligned).

By reading your example, I'm not sure we're talking about the same thing. Actually, do you refer to the fact that the ioam6_trace_hdr field must be 8n-aligned? If so, I don't see any static way to do that (i.e., by adding anonymous fields as you did) since it depends on the size of the data field I mentioned above.  The size can either be 8n-aligned already, or 4n-aligned in which case we add a PadN (1 2 0 0) at the end of the data field.

Re: [PATCH net-next 1/2] ipv6: ioam: Add support for the ip6ip6 encapsulation

[David Ahern]

On 10/1/21 5:38 AM, Justin Iurman wrote:
>>>>>  static const struct nla_policy ioam6_iptunnel_policy[IOAM6_IPTUNNEL_MAX + 1] = {
>>>>> -	[IOAM6_IPTUNNEL_TRACE]	= NLA_POLICY_EXACT_LEN(sizeof(struct ioam6_trace_hdr)),
>>>>> +	[IOAM6_IPTUNNEL_TRACE]	= NLA_POLICY_EXACT_LEN(sizeof(struct
>>>>> ioam6_iptunnel_trace)),
>>>>
>>>> you can't do that. Once a kernel is released with a given UAPI, it can
>>>> not be changed. You could go the other way and handle
>>>>
>>>> struct ioam6_iptunnel_trace {
>>>> +	struct ioam6_trace_hdr trace;
>>>> +	__u8 mode;
>>>> +	struct in6_addr tundst;	/* unused for inline mode */
>>>> +};
>>>
>>> Makes sense. But I'm not sure what you mean by "go the other way". Should I
>>> handle ioam6_iptunnel_trace as well, in addition to ioam6_trace_hdr, so that
>>> the uapi is backward compatible?
>>
>> by "the other way" I meant let ioam6_trace_hdr be the top element in the
>> new ioam6_iptunnel_trace struct. If the IOAM6_IPTUNNEL_TRACE size ==
>> ioam6_trace_hdr then you know it is the legacy argument vs sizeof
>> ioam6_iptunnel_trace which is the new.
> 
> OK, I see. The problem is ioam6_trace_hdr must be the last entry because of its last field, which is "__u8 data[0]". But, anyway, I could still apply the same kind of logic with the size.

ok, forgot about the data field.

Why not make the new data separate attributes then? Avoids the alignment
problem.

Re: [PATCH net-next 1/2] ipv6: ioam: Add support for the ip6ip6 encapsulation

[Justin Iurman]

>>>>>>  static const struct nla_policy ioam6_iptunnel_policy[IOAM6_IPTUNNEL_MAX + 1] = {
>>>>>> -	[IOAM6_IPTUNNEL_TRACE]	= NLA_POLICY_EXACT_LEN(sizeof(struct ioam6_trace_hdr)),
>>>>>> +	[IOAM6_IPTUNNEL_TRACE]	= NLA_POLICY_EXACT_LEN(sizeof(struct
>>>>>> ioam6_iptunnel_trace)),
>>>>>
>>>>> you can't do that. Once a kernel is released with a given UAPI, it can
>>>>> not be changed. You could go the other way and handle
>>>>>
>>>>> struct ioam6_iptunnel_trace {
>>>>> +	struct ioam6_trace_hdr trace;
>>>>> +	__u8 mode;
>>>>> +	struct in6_addr tundst;	/* unused for inline mode */
>>>>> +};
>>>>
>>>> Makes sense. But I'm not sure what you mean by "go the other way". Should I
>>>> handle ioam6_iptunnel_trace as well, in addition to ioam6_trace_hdr, so that
>>>> the uapi is backward compatible?
>>>
>>> by "the other way" I meant let ioam6_trace_hdr be the top element in the
>>> new ioam6_iptunnel_trace struct. If the IOAM6_IPTUNNEL_TRACE size ==
>>> ioam6_trace_hdr then you know it is the legacy argument vs sizeof
>>> ioam6_iptunnel_trace which is the new.
>> 
>> OK, I see. The problem is ioam6_trace_hdr must be the last entry because of its
>> last field, which is "__u8 data[0]". But, anyway, I could still apply the same
>> kind of logic with the size.
> 
> ok, forgot about the data field.
> 
> Why not make the new data separate attributes then? Avoids the alignment
> problem.

Great idea, I'll do that.

[PATCH net-next 2/2] selftests: net: Test for the IOAM encapsulation with IPv6

[Justin Iurman]

This patch adds support for testing the encap mode of IOAM.

Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
---
 tools/testing/selftests/net/ioam6.sh | 209 ++++++++++++++++++++-------
 1 file changed, 159 insertions(+), 50 deletions(-)

diff --git a/tools/testing/selftests/net/ioam6.sh b/tools/testing/selftests/net/ioam6.sh
index 3caf72bb9c6a..90700303d8a9 100755
--- a/tools/testing/selftests/net/ioam6.sh
+++ b/tools/testing/selftests/net/ioam6.sh
@@ -6,7 +6,7 @@
 # This script evaluates the IOAM insertion for IPv6 by checking the IOAM data
 # consistency directly inside packets on the receiver side. Tests are divided
 # into three categories: OUTPUT (evaluates the IOAM processing by the sender),
-# INPUT (evaluates the IOAM processing by the receiver) and GLOBAL (evaluates
+# INPUT (evaluates the IOAM processing by a receiver) and GLOBAL (evaluates
 # wider use cases that do not fall into the other two categories). Both OUTPUT
 # and INPUT tests only use a two-node topology (alpha and beta), while GLOBAL
 # tests use the entire three-node topology (alpha, beta, gamma). Each test is
@@ -200,7 +200,7 @@ check_kernel_compatibility()
   ip -netns ioam-tmp-node link set veth0 up
   ip -netns ioam-tmp-node link set veth1 up
 
-  ip -netns ioam-tmp-node ioam namespace add 0 &>/dev/null
+  ip -netns ioam-tmp-node ioam namespace add 0
   ns_ad=$?
 
   ip -netns ioam-tmp-node ioam namespace show | grep -q "namespace 0"
@@ -214,11 +214,11 @@ check_kernel_compatibility()
     exit 1
   fi
 
-  ip -netns ioam-tmp-node route add db02::/64 encap ioam6 trace prealloc \
-         type 0x800000 ns 0 size 4 dev veth0 &>/dev/null
+  ip -netns ioam-tmp-node route add db02::/64 encap ioam6 mode inline \
+         trace prealloc type 0x800000 ns 0 size 4 dev veth0
   tr_ad=$?
 
-  ip -netns ioam-tmp-node -6 route | grep -q "encap ioam6 trace"
+  ip -netns ioam-tmp-node -6 route | grep -q "encap ioam6"
   tr_sh=$?
 
   if [[ $tr_ad != 0 || $tr_sh != 0 ]]
@@ -232,6 +232,30 @@ check_kernel_compatibility()
 
   ip link del veth0 2>/dev/null || true
   ip netns del ioam-tmp-node || true
+
+  lsmod | grep -q "ip6_tunnel"
+  ip6tnl_loaded=$?
+
+  if [ $ip6tnl_loaded = 0 ]
+  then
+    encap_tests=0
+  else
+    modprobe ip6_tunnel &>/dev/null
+    lsmod | grep -q "ip6_tunnel"
+    encap_tests=$?
+
+    if [ $encap_tests != 0 ]
+    then
+      ip a | grep -q "ip6tnl0"
+      encap_tests=$?
+
+      if [ $encap_tests != 0 ]
+      then
+        echo "Note: ip6_tunnel not found neither as a module nor inside the" \
+             "kernel, tests that require it (encap mode) will be omitted"
+      fi
+    fi
+  fi
 }
 
 cleanup()
@@ -242,6 +266,11 @@ cleanup()
   ip netns del ioam-node-alpha || true
   ip netns del ioam-node-beta || true
   ip netns del ioam-node-gamma || true
+
+  if [ $ip6tnl_loaded != 0 ]
+  then
+    modprobe -r ip6_tunnel 2>/dev/null || true
+  fi
 }
 
 setup()
@@ -329,6 +358,12 @@ log_test_failed()
   printf "TEST: %-60s  [FAIL]\n" "${desc}"
 }
 
+log_results()
+{
+  echo "- Tests passed: ${npassed}"
+  echo "- Tests failed: ${nfailed}"
+}
+
 run_test()
 {
   local name=$1
@@ -349,16 +384,26 @@ run_test()
   ip netns exec $node_src ping6 -t 64 -c 1 -W 1 $ip6_dst &>/dev/null
   if [ $? != 0 ]
   then
+    nfailed=$((nfailed+1))
     log_test_failed "${desc}"
     kill -2 $spid &>/dev/null
   else
     wait $spid
-    [ $? = 0 ] && log_test_passed "${desc}" || log_test_failed "${desc}"
+    if [ $? = 0 ]
+    then
+      npassed=$((npassed+1))
+      log_test_passed "${desc}"
+    else
+      nfailed=$((nfailed+1))
+      log_test_failed "${desc}"
+    fi
   fi
 }
 
 run()
 {
+  echo
+  printf "%0.s-" {1..74}
   echo
   echo "OUTPUT tests"
   printf "%0.s-" {1..74}
@@ -369,7 +414,8 @@ run()
 
   for t in $TESTS_OUTPUT
   do
-    $t
+    $t "inline"
+    [ $encap_tests = 0 ] && $t "encap"
   done
 
   # clean OUTPUT settings
@@ -377,6 +423,8 @@ run()
   ip -netns ioam-node-alpha route change db01::/64 dev veth0
 
 
+  echo
+  printf "%0.s-" {1..74}
   echo
   echo "INPUT tests"
   printf "%0.s-" {1..74}
@@ -387,7 +435,8 @@ run()
 
   for t in $TESTS_INPUT
   do
-    $t
+    $t "inline"
+    [ $encap_tests = 0 ] && $t "encap"
   done
 
   # clean INPUT settings
@@ -396,7 +445,8 @@ run()
   ip -netns ioam-node-alpha ioam namespace set 123 schema ${ALPHA[8]}
   ip -netns ioam-node-alpha route change db01::/64 dev veth0
 
-
+  echo
+  printf "%0.s-" {1..74}
   echo
   echo "GLOBAL tests"
   printf "%0.s-" {1..74}
@@ -404,8 +454,12 @@ run()
 
   for t in $TESTS_GLOBAL
   do
-    $t
+    $t "inline"
+    [ $encap_tests = 0 ] && $t "encap"
   done
+
+  echo
+  log_results
 }
 
 bit2type=(
@@ -431,11 +485,16 @@ out_undef_ns()
   ##############################################################################
   local desc="Unknown IOAM namespace"
 
-  ip -netns ioam-node-alpha route change db01::/64 encap ioam6 trace prealloc \
-         type 0x800000 ns 0 size 4 dev veth0
+  [ "$1" = "encap" ] && mode="$1 tundst db01::1" || mode="$1"
+  [ "$1" = "encap" ] && ip -netns ioam-node-beta link set ip6tnl0 up
+
+  ip -netns ioam-node-alpha route change db01::/64 encap ioam6 mode $mode \
+         trace prealloc type 0x800000 ns 0 size 4 dev veth0
 
-  run_test ${FUNCNAME[0]} "${desc}" ioam-node-alpha ioam-node-beta db01::2 \
-         db01::1 veth0 0x800000 0
+  run_test ${FUNCNAME[0]} "${desc} ($1 mode)" ioam-node-alpha ioam-node-beta \
+         db01::2 db01::1 veth0 0x800000 0
+
+  [ "$1" = "encap" ] && ip -netns ioam-node-beta link set ip6tnl0 down
 }
 
 out_no_room()
@@ -446,11 +505,16 @@ out_no_room()
   ##############################################################################
   local desc="Missing trace room"
 
-  ip -netns ioam-node-alpha route change db01::/64 encap ioam6 trace prealloc \
-         type 0xc00000 ns 123 size 4 dev veth0
+  [ "$1" = "encap" ] && mode="$1 tundst db01::1" || mode="$1"
+  [ "$1" = "encap" ] && ip -netns ioam-node-beta link set ip6tnl0 up
+
+  ip -netns ioam-node-alpha route change db01::/64 encap ioam6 mode $mode \
+         trace prealloc type 0xc00000 ns 123 size 4 dev veth0
+
+  run_test ${FUNCNAME[0]} "${desc} ($1 mode)" ioam-node-alpha ioam-node-beta \
+         db01::2 db01::1 veth0 0xc00000 123
 
-  run_test ${FUNCNAME[0]} "${desc}" ioam-node-alpha ioam-node-beta db01::2 \
-         db01::1 veth0 0xc00000 123
+  [ "$1" = "encap" ] && ip -netns ioam-node-beta link set ip6tnl0 down
 }
 
 out_bits()
@@ -465,15 +529,21 @@ out_bits()
   local tmp=${bit2size[22]}
   bit2size[22]=$(( $tmp + ${#ALPHA[9]} + ((4 - (${#ALPHA[9]} % 4)) % 4) ))
 
+  [ "$1" = "encap" ] && mode="$1 tundst db01::1" || mode="$1"
+  [ "$1" = "encap" ] && ip -netns ioam-node-beta link set ip6tnl0 up
+
   for i in {0..22}
   do
-    ip -netns ioam-node-alpha route change db01::/64 encap ioam6 trace \
-           prealloc type ${bit2type[$i]} ns 123 size ${bit2size[$i]} dev veth0
+    ip -netns ioam-node-alpha route change db01::/64 encap ioam6 mode $mode \
+           trace prealloc type ${bit2type[$i]} ns 123 size ${bit2size[$i]} \
+           dev veth0
 
-    run_test "out_bit$i" "${desc/<n>/$i}" ioam-node-alpha ioam-node-beta \
-           db01::2 db01::1 veth0 ${bit2type[$i]} 123
+    run_test "out_bit$i" "${desc/<n>/$i} ($1 mode)" ioam-node-alpha \
+           ioam-node-beta db01::2 db01::1 veth0 ${bit2type[$i]} 123
   done
 
+  [ "$1" = "encap" ] && ip -netns ioam-node-beta link set ip6tnl0 down
+
   bit2size[22]=$tmp
 }
 
@@ -485,11 +555,16 @@ out_full_supp_trace()
   ##############################################################################
   local desc="Full supported trace"
 
-  ip -netns ioam-node-alpha route change db01::/64 encap ioam6 trace prealloc \
-         type 0xfff002 ns 123 size 100 dev veth0
+  [ "$1" = "encap" ] && mode="$1 tundst db01::1" || mode="$1"
+  [ "$1" = "encap" ] && ip -netns ioam-node-beta link set ip6tnl0 up
 
-  run_test ${FUNCNAME[0]} "${desc}" ioam-node-alpha ioam-node-beta db01::2 \
-         db01::1 veth0 0xfff002 123
+  ip -netns ioam-node-alpha route change db01::/64 encap ioam6 mode $mode \
+         trace prealloc type 0xfff002 ns 123 size 100 dev veth0
+
+  run_test ${FUNCNAME[0]} "${desc} ($1 mode)" ioam-node-alpha ioam-node-beta \
+         db01::2 db01::1 veth0 0xfff002 123
+
+  [ "$1" = "encap" ] && ip -netns ioam-node-beta link set ip6tnl0 down
 }
 
 
@@ -510,11 +585,16 @@ in_undef_ns()
   ##############################################################################
   local desc="Unknown IOAM namespace"
 
-  ip -netns ioam-node-alpha route change db01::/64 encap ioam6 trace prealloc \
-         type 0x800000 ns 0 size 4 dev veth0
+  [ "$1" = "encap" ] && mode="$1 tundst db01::1" || mode="$1"
+  [ "$1" = "encap" ] && ip -netns ioam-node-beta link set ip6tnl0 up
+
+  ip -netns ioam-node-alpha route change db01::/64 encap ioam6 mode $mode \
+         trace prealloc type 0x800000 ns 0 size 4 dev veth0
 
-  run_test ${FUNCNAME[0]} "${desc}" ioam-node-alpha ioam-node-beta db01::2 \
-         db01::1 veth0 0x800000 0
+  run_test ${FUNCNAME[0]} "${desc} ($1 mode)" ioam-node-alpha ioam-node-beta \
+         db01::2 db01::1 veth0 0x800000 0
+
+  [ "$1" = "encap" ] && ip -netns ioam-node-beta link set ip6tnl0 down
 }
 
 in_no_room()
@@ -525,11 +605,16 @@ in_no_room()
   ##############################################################################
   local desc="Missing trace room"
 
-  ip -netns ioam-node-alpha route change db01::/64 encap ioam6 trace prealloc \
-         type 0xc00000 ns 123 size 4 dev veth0
+  [ "$1" = "encap" ] && mode="$1 tundst db01::1" || mode="$1"
+  [ "$1" = "encap" ] && ip -netns ioam-node-beta link set ip6tnl0 up
+
+  ip -netns ioam-node-alpha route change db01::/64 encap ioam6 mode $mode \
+         trace prealloc type 0xc00000 ns 123 size 4 dev veth0
 
-  run_test ${FUNCNAME[0]} "${desc}" ioam-node-alpha ioam-node-beta db01::2 \
-         db01::1 veth0 0xc00000 123
+  run_test ${FUNCNAME[0]} "${desc} ($1 mode)" ioam-node-alpha ioam-node-beta \
+         db01::2 db01::1 veth0 0xc00000 123
+
+  [ "$1" = "encap" ] && ip -netns ioam-node-beta link set ip6tnl0 down
 }
 
 in_bits()
@@ -544,15 +629,21 @@ in_bits()
   local tmp=${bit2size[22]}
   bit2size[22]=$(( $tmp + ${#BETA[9]} + ((4 - (${#BETA[9]} % 4)) % 4) ))
 
+  [ "$1" = "encap" ] && mode="$1 tundst db01::1" || mode="$1"
+  [ "$1" = "encap" ] && ip -netns ioam-node-beta link set ip6tnl0 up
+
   for i in {0..22}
   do
-    ip -netns ioam-node-alpha route change db01::/64 encap ioam6 trace \
-           prealloc type ${bit2type[$i]} ns 123 size ${bit2size[$i]} dev veth0
+    ip -netns ioam-node-alpha route change db01::/64 encap ioam6 mode $mode \
+           trace prealloc type ${bit2type[$i]} ns 123 size ${bit2size[$i]} \
+           dev veth0
 
-    run_test "in_bit$i" "${desc/<n>/$i}" ioam-node-alpha ioam-node-beta \
-           db01::2 db01::1 veth0 ${bit2type[$i]} 123
+    run_test "in_bit$i" "${desc/<n>/$i} ($1 mode)" ioam-node-alpha \
+           ioam-node-beta db01::2 db01::1 veth0 ${bit2type[$i]} 123
   done
 
+  [ "$1" = "encap" ] && ip -netns ioam-node-beta link set ip6tnl0 down
+
   bit2size[22]=$tmp
 }
 
@@ -569,11 +660,16 @@ in_oflag()
   #   back the IOAM namespace that was previously configured on the sender.
   ip -netns ioam-node-alpha ioam namespace add 123
 
-  ip -netns ioam-node-alpha route change db01::/64 encap ioam6 trace prealloc \
-         type 0xc00000 ns 123 size 4 dev veth0
+  [ "$1" = "encap" ] && mode="$1 tundst db01::1" || mode="$1"
+  [ "$1" = "encap" ] && ip -netns ioam-node-beta link set ip6tnl0 up
+
+  ip -netns ioam-node-alpha route change db01::/64 encap ioam6 mode $mode \
+         trace prealloc type 0xc00000 ns 123 size 4 dev veth0
+
+  run_test ${FUNCNAME[0]} "${desc} ($1 mode)" ioam-node-alpha ioam-node-beta \
+         db01::2 db01::1 veth0 0xc00000 123
 
-  run_test ${FUNCNAME[0]} "${desc}" ioam-node-alpha ioam-node-beta db01::2 \
-         db01::1 veth0 0xc00000 123
+  [ "$1" = "encap" ] && ip -netns ioam-node-beta link set ip6tnl0 down
 
   # And we clean the exception for this test to get things back to normal for
   # other INPUT tests
@@ -588,11 +684,16 @@ in_full_supp_trace()
   ##############################################################################
   local desc="Full supported trace"
 
-  ip -netns ioam-node-alpha route change db01::/64 encap ioam6 trace prealloc \
-         type 0xfff002 ns 123 size 80 dev veth0
+  [ "$1" = "encap" ] && mode="$1 tundst db01::1" || mode="$1"
+  [ "$1" = "encap" ] && ip -netns ioam-node-beta link set ip6tnl0 up
 
-  run_test ${FUNCNAME[0]} "${desc}" ioam-node-alpha ioam-node-beta db01::2 \
-         db01::1 veth0 0xfff002 123
+  ip -netns ioam-node-alpha route change db01::/64 encap ioam6 mode $mode \
+         trace prealloc type 0xfff002 ns 123 size 80 dev veth0
+
+  run_test ${FUNCNAME[0]} "${desc} ($1 mode)" ioam-node-alpha ioam-node-beta \
+         db01::2 db01::1 veth0 0xfff002 123
+
+  [ "$1" = "encap" ] && ip -netns ioam-node-beta link set ip6tnl0 down
 }
 
 
@@ -611,11 +712,16 @@ fwd_full_supp_trace()
   ##############################################################################
   local desc="Forward - Full supported trace"
 
-  ip -netns ioam-node-alpha route change db02::/64 encap ioam6 trace prealloc \
-         type 0xfff002 ns 123 size 244 via db01::1 dev veth0
+  [ "$1" = "encap" ] && mode="$1 tundst db02::2" || mode="$1"
+  [ "$1" = "encap" ] && ip -netns ioam-node-gamma link set ip6tnl0 up
+
+  ip -netns ioam-node-alpha route change db02::/64 encap ioam6 mode $mode \
+         trace prealloc type 0xfff002 ns 123 size 244 via db01::1 dev veth0
 
-  run_test ${FUNCNAME[0]} "${desc}" ioam-node-alpha ioam-node-gamma db01::2 \
-         db02::2 veth0 0xfff002 123
+  run_test ${FUNCNAME[0]} "${desc} ($1 mode)" ioam-node-alpha ioam-node-gamma \
+         db01::2 db02::2 veth0 0xfff002 123
+
+  [ "$1" = "encap" ] && ip -netns ioam-node-gamma link set ip6tnl0 down
 }
 
 
@@ -625,6 +731,9 @@ fwd_full_supp_trace()
 #                                                                              #
 ################################################################################
 
+npassed=0
+nfailed=0
+
 if [ "$(id -u)" -ne 0 ]
 then
   echo "SKIP: Need root privileges"
-- 
2.25.1

Re: [PATCH net-next 0/2] Support for the ip6ip6 encapsulation of IOAM

[David Ahern]

On 9/28/21 1:03 PM, Justin Iurman wrote:
> In the current implementation, IOAM can only be inserted directly (i.e., only
> inside packets generated locally) by default, to be compliant with RFC8200.
> 
> This patch adds support for in-transit packets and provides the ip6ip6
> encapsulation of IOAM. Therefore, three explicit encap modes are defined:
> 
>  - inline: directly inserts IOAM inside packets.
> 
>  - encap:  ip6ip6 encapsulation of IOAM inside packets.
> 
>  - auto:   either inline mode for packets generated locally or encap mode for
>            in-transit packets.
> 
> With current iproute2 implementation, it is configured this way:
> 
> $ ip -6 r [...] encap ioam6 trace prealloc type 0x800000 ns 1 size 12 [...]
> 
> Now, an encap mode must be specified:
> 
> (inline mode)
> $ [...] encap ioam6 mode inline trace prealloc [...]

I take this to mean you want to change the CLI for ioam6? If so, that
does not happen once an iproute2 version has shipped with some previous
command line; it needs to be backwards compatible.

> 
> (encap mode)
> $ [...] encap ioam6 mode encap tundst fc00::2 trace prealloc [...]
> 
> (auto mode)
> $ [...] encap ioam6 mode auto tundst fc00::2 trace prealloc [...]
> 
> A tunnel destination address must be configured when using the encap mode or the
> auto mode.
> 

Re: [PATCH net-next 0/2] Support for the ip6ip6 encapsulation of IOAM

[Justin Iurman]

>> With current iproute2 implementation, it is configured this way:
>> 
>> $ ip -6 r [...] encap ioam6 trace prealloc type 0x800000 ns 1 size 12 [...]
>> 
>> Now, an encap mode must be specified:
>> 
>> (inline mode)
>> $ [...] encap ioam6 mode inline trace prealloc [...]
> 
> I take this to mean you want to change the CLI for ioam6? If so, that
> does not happen once an iproute2 version has shipped with some previous
> command line; it needs to be backwards compatible.

Sure. The inline mode would be the default one when using the old syntax (i.e., without specifying a mode).