* [PATCH v2] drm: fsl-dcu: enable PIXCLK on LS1021A
@ 2021-10-05 14:10 Matthias Schiffer
2021-11-08 9:11 ` Matthias Schiffer
0 siblings, 1 reply; 5+ messages in thread
From: Matthias Schiffer @ 2021-10-05 14:10 UTC (permalink / raw)
To: Stefan Agner, Alison Wang, David Airlie, Daniel Vetter
Cc: dri-devel, linux-kernel, Matthias Schiffer
The PIXCLK needs to be enabled in SCFG before accessing the DCU on LS1021A,
or the access will hang.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
---
v2:
- rebase
- remove unnecessary argument of fsl_dcu_scfg_config_ls1021a()
drivers/gpu/drm/fsl-dcu/Kconfig | 1 +
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 25 +++++++++++++++++++++++
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 3 +++
3 files changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/fsl-dcu/Kconfig b/drivers/gpu/drm/fsl-dcu/Kconfig
index d7dd8ba90e3a..9e5a35e7c00c 100644
--- a/drivers/gpu/drm/fsl-dcu/Kconfig
+++ b/drivers/gpu/drm/fsl-dcu/Kconfig
@@ -8,6 +8,7 @@ config DRM_FSL_DCU
select DRM_PANEL
select REGMAP_MMIO
select VIDEOMODE_HELPERS
+ select MFD_SYSCON if SOC_LS1021A
help
Choose this option if you have an Freescale DCU chipset.
If M is selected the module will be called fsl-dcu-drm.
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
index 660fe573db96..b6b1cb75fc41 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
@@ -50,6 +50,23 @@ static const struct regmap_config fsl_dcu_regmap_config = {
.volatile_reg = fsl_dcu_drm_is_volatile_reg,
};
+static int fsl_dcu_scfg_config_ls1021a(void)
+{
+ struct regmap *scfg;
+
+ scfg = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg");
+ if (IS_ERR(scfg))
+ return PTR_ERR(scfg);
+
+ /*
+ * For simplicity, enable the PIXCLK unconditionally. It might
+ * be possible to disable the clock in PM or on unload as a future
+ * improvement.
+ */
+ return regmap_update_bits(scfg, SCFG_PIXCLKCR, SCFG_PIXCLKCR_PXCEN,
+ SCFG_PIXCLKCR_PXCEN);
+}
+
static void fsl_dcu_irq_reset(struct drm_device *dev)
{
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
@@ -108,6 +125,14 @@ static int fsl_dcu_load(struct drm_device *dev, unsigned long flags)
return ret;
}
+ if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu")) {
+ ret = fsl_dcu_scfg_config_ls1021a();
+ if (ret < 0) {
+ dev_err(dev->dev, "failed to enable pixclk\n");
+ goto done_vblank;
+ }
+ }
+
ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
if (ret < 0) {
dev_err(dev->dev, "failed to initialize vblank\n");
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
index e2049a0e8a92..566396013c04 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
@@ -160,6 +160,9 @@
#define FSL_DCU_ARGB4444 12
#define FSL_DCU_YUV422 14
+#define SCFG_PIXCLKCR 0x28
+#define SCFG_PIXCLKCR_PXCEN BIT(31)
+
#define VF610_LAYER_REG_NUM 9
#define LS1021A_LAYER_REG_NUM 10
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2] drm: fsl-dcu: enable PIXCLK on LS1021A
2021-10-05 14:10 [PATCH v2] drm: fsl-dcu: enable PIXCLK on LS1021A Matthias Schiffer
@ 2021-11-08 9:11 ` Matthias Schiffer
0 siblings, 0 replies; 5+ messages in thread
From: Matthias Schiffer @ 2021-11-08 9:11 UTC (permalink / raw)
To: Stefan Agner, Alison Wang, David Airlie, Daniel Vetter
Cc: dri-devel, linux-kernel
On Tue, 2021-10-05 at 16:10 +0200, Matthias Schiffer wrote:
> The PIXCLK needs to be enabled in SCFG before accessing the DCU on LS1021A,
> or the access will hang.
>
> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Hi,
what is the status of this patch? I found it "archived" in the dri-
devel patchwork, should I be looking somewhere else?
> ---
>
> v2:
> - rebase
> - remove unnecessary argument of fsl_dcu_scfg_config_ls1021a()
>
>
> drivers/gpu/drm/fsl-dcu/Kconfig | 1 +
> drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 25 +++++++++++++++++++++++
> drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 3 +++
> 3 files changed, 29 insertions(+)
>
> diff --git a/drivers/gpu/drm/fsl-dcu/Kconfig b/drivers/gpu/drm/fsl-dcu/Kconfig
> index d7dd8ba90e3a..9e5a35e7c00c 100644
> --- a/drivers/gpu/drm/fsl-dcu/Kconfig
> +++ b/drivers/gpu/drm/fsl-dcu/Kconfig
> @@ -8,6 +8,7 @@ config DRM_FSL_DCU
> select DRM_PANEL
> select REGMAP_MMIO
> select VIDEOMODE_HELPERS
> + select MFD_SYSCON if SOC_LS1021A
> help
> Choose this option if you have an Freescale DCU chipset.
> If M is selected the module will be called fsl-dcu-drm.
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> index 660fe573db96..b6b1cb75fc41 100644
> --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> @@ -50,6 +50,23 @@ static const struct regmap_config fsl_dcu_regmap_config = {
> .volatile_reg = fsl_dcu_drm_is_volatile_reg,
> };
>
> +static int fsl_dcu_scfg_config_ls1021a(void)
> +{
> + struct regmap *scfg;
> +
> + scfg = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg");
> + if (IS_ERR(scfg))
> + return PTR_ERR(scfg);
> +
> + /*
> + * For simplicity, enable the PIXCLK unconditionally. It might
> + * be possible to disable the clock in PM or on unload as a future
> + * improvement.
> + */
> + return regmap_update_bits(scfg, SCFG_PIXCLKCR, SCFG_PIXCLKCR_PXCEN,
> + SCFG_PIXCLKCR_PXCEN);
> +}
> +
> static void fsl_dcu_irq_reset(struct drm_device *dev)
> {
> struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
> @@ -108,6 +125,14 @@ static int fsl_dcu_load(struct drm_device *dev, unsigned long flags)
> return ret;
> }
>
> + if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu")) {
> + ret = fsl_dcu_scfg_config_ls1021a();
> + if (ret < 0) {
> + dev_err(dev->dev, "failed to enable pixclk\n");
> + goto done_vblank;
> + }
> + }
> +
> ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
> if (ret < 0) {
> dev_err(dev->dev, "failed to initialize vblank\n");
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> index e2049a0e8a92..566396013c04 100644
> --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> @@ -160,6 +160,9 @@
> #define FSL_DCU_ARGB4444 12
> #define FSL_DCU_YUV422 14
>
> +#define SCFG_PIXCLKCR 0x28
> +#define SCFG_PIXCLKCR_PXCEN BIT(31)
> +
> #define VF610_LAYER_REG_NUM 9
> #define LS1021A_LAYER_REG_NUM 10
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] drm: fsl-dcu: enable PIXCLK on LS1021A
@ 2021-11-08 9:11 ` Matthias Schiffer
0 siblings, 0 replies; 5+ messages in thread
From: Matthias Schiffer @ 2021-11-08 9:11 UTC (permalink / raw)
To: Stefan Agner, Alison Wang, David Airlie, Daniel Vetter
Cc: linux-kernel, dri-devel
On Tue, 2021-10-05 at 16:10 +0200, Matthias Schiffer wrote:
> The PIXCLK needs to be enabled in SCFG before accessing the DCU on LS1021A,
> or the access will hang.
>
> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Hi,
what is the status of this patch? I found it "archived" in the dri-
devel patchwork, should I be looking somewhere else?
> ---
>
> v2:
> - rebase
> - remove unnecessary argument of fsl_dcu_scfg_config_ls1021a()
>
>
> drivers/gpu/drm/fsl-dcu/Kconfig | 1 +
> drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 25 +++++++++++++++++++++++
> drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 3 +++
> 3 files changed, 29 insertions(+)
>
> diff --git a/drivers/gpu/drm/fsl-dcu/Kconfig b/drivers/gpu/drm/fsl-dcu/Kconfig
> index d7dd8ba90e3a..9e5a35e7c00c 100644
> --- a/drivers/gpu/drm/fsl-dcu/Kconfig
> +++ b/drivers/gpu/drm/fsl-dcu/Kconfig
> @@ -8,6 +8,7 @@ config DRM_FSL_DCU
> select DRM_PANEL
> select REGMAP_MMIO
> select VIDEOMODE_HELPERS
> + select MFD_SYSCON if SOC_LS1021A
> help
> Choose this option if you have an Freescale DCU chipset.
> If M is selected the module will be called fsl-dcu-drm.
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> index 660fe573db96..b6b1cb75fc41 100644
> --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> @@ -50,6 +50,23 @@ static const struct regmap_config fsl_dcu_regmap_config = {
> .volatile_reg = fsl_dcu_drm_is_volatile_reg,
> };
>
> +static int fsl_dcu_scfg_config_ls1021a(void)
> +{
> + struct regmap *scfg;
> +
> + scfg = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg");
> + if (IS_ERR(scfg))
> + return PTR_ERR(scfg);
> +
> + /*
> + * For simplicity, enable the PIXCLK unconditionally. It might
> + * be possible to disable the clock in PM or on unload as a future
> + * improvement.
> + */
> + return regmap_update_bits(scfg, SCFG_PIXCLKCR, SCFG_PIXCLKCR_PXCEN,
> + SCFG_PIXCLKCR_PXCEN);
> +}
> +
> static void fsl_dcu_irq_reset(struct drm_device *dev)
> {
> struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
> @@ -108,6 +125,14 @@ static int fsl_dcu_load(struct drm_device *dev, unsigned long flags)
> return ret;
> }
>
> + if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu")) {
> + ret = fsl_dcu_scfg_config_ls1021a();
> + if (ret < 0) {
> + dev_err(dev->dev, "failed to enable pixclk\n");
> + goto done_vblank;
> + }
> + }
> +
> ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
> if (ret < 0) {
> dev_err(dev->dev, "failed to initialize vblank\n");
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> index e2049a0e8a92..566396013c04 100644
> --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> @@ -160,6 +160,9 @@
> #define FSL_DCU_ARGB4444 12
> #define FSL_DCU_YUV422 14
>
> +#define SCFG_PIXCLKCR 0x28
> +#define SCFG_PIXCLKCR_PXCEN BIT(31)
> +
> #define VF610_LAYER_REG_NUM 9
> #define LS1021A_LAYER_REG_NUM 10
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] drm: fsl-dcu: enable PIXCLK on LS1021A
2021-11-08 9:11 ` Matthias Schiffer
@ 2021-12-02 9:03 ` Matthias Schiffer
-1 siblings, 0 replies; 5+ messages in thread
From: Matthias Schiffer @ 2021-12-02 9:03 UTC (permalink / raw)
To: Stefan Agner, Alison Wang, David Airlie, Daniel Vetter
Cc: linux-kernel, dri-devel
On Mon, 2021-11-08 at 10:11 +0100, Matthias Schiffer wrote:
> On Tue, 2021-10-05 at 16:10 +0200, Matthias Schiffer wrote:
> > The PIXCLK needs to be enabled in SCFG before accessing the DCU on
> > LS1021A,
> > or the access will hang.
> >
> > Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com
> > >
>
> Hi,
> what is the status of this patch? I found it "archived" in the dri-
> devel patchwork, should I be looking somewhere else?
ping
>
>
>
>
> > ---
> >
> > v2:
> > - rebase
> > - remove unnecessary argument of fsl_dcu_scfg_config_ls1021a()
> >
> >
> > drivers/gpu/drm/fsl-dcu/Kconfig | 1 +
> > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 25
> > +++++++++++++++++++++++
> > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 3 +++
> > 3 files changed, 29 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/fsl-dcu/Kconfig b/drivers/gpu/drm/fsl-
> > dcu/Kconfig
> > index d7dd8ba90e3a..9e5a35e7c00c 100644
> > --- a/drivers/gpu/drm/fsl-dcu/Kconfig
> > +++ b/drivers/gpu/drm/fsl-dcu/Kconfig
> > @@ -8,6 +8,7 @@ config DRM_FSL_DCU
> > select DRM_PANEL
> > select REGMAP_MMIO
> > select VIDEOMODE_HELPERS
> > + select MFD_SYSCON if SOC_LS1021A
> > help
> > Choose this option if you have an Freescale DCU chipset.
> > If M is selected the module will be called fsl-dcu-drm.
> > diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> > b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> > index 660fe573db96..b6b1cb75fc41 100644
> > --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> > +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> > @@ -50,6 +50,23 @@ static const struct regmap_config
> > fsl_dcu_regmap_config = {
> > .volatile_reg = fsl_dcu_drm_is_volatile_reg,
> > };
> >
> > +static int fsl_dcu_scfg_config_ls1021a(void)
> > +{
> > + struct regmap *scfg;
> > +
> > + scfg = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg");
> > + if (IS_ERR(scfg))
> > + return PTR_ERR(scfg);
> > +
> > + /*
> > + * For simplicity, enable the PIXCLK unconditionally. It might
> > + * be possible to disable the clock in PM or on unload as a
> > future
> > + * improvement.
> > + */
> > + return regmap_update_bits(scfg, SCFG_PIXCLKCR,
> > SCFG_PIXCLKCR_PXCEN,
> > + SCFG_PIXCLKCR_PXCEN);
> > +}
> > +
> > static void fsl_dcu_irq_reset(struct drm_device *dev)
> > {
> > struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
> > @@ -108,6 +125,14 @@ static int fsl_dcu_load(struct drm_device
> > *dev, unsigned long flags)
> > return ret;
> > }
> >
> > + if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu")) {
> > + ret = fsl_dcu_scfg_config_ls1021a();
> > + if (ret < 0) {
> > + dev_err(dev->dev, "failed to enable pixclk\n");
> > + goto done_vblank;
> > + }
> > + }
> > +
> > ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
> > if (ret < 0) {
> > dev_err(dev->dev, "failed to initialize vblank\n");
> > diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> > b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> > index e2049a0e8a92..566396013c04 100644
> > --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> > +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> > @@ -160,6 +160,9 @@
> > #define FSL_DCU_ARGB4444 12
> > #define FSL_DCU_YUV422 14
> >
> > +#define SCFG_PIXCLKCR 0x28
> > +#define SCFG_PIXCLKCR_PXCEN BIT(31)
> > +
> > #define VF610_LAYER_REG_NUM 9
> > #define LS1021A_LAYER_REG_NUM 10
> >
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] drm: fsl-dcu: enable PIXCLK on LS1021A
@ 2021-12-02 9:03 ` Matthias Schiffer
0 siblings, 0 replies; 5+ messages in thread
From: Matthias Schiffer @ 2021-12-02 9:03 UTC (permalink / raw)
To: Stefan Agner, Alison Wang, David Airlie, Daniel Vetter
Cc: dri-devel, linux-kernel
On Mon, 2021-11-08 at 10:11 +0100, Matthias Schiffer wrote:
> On Tue, 2021-10-05 at 16:10 +0200, Matthias Schiffer wrote:
> > The PIXCLK needs to be enabled in SCFG before accessing the DCU on
> > LS1021A,
> > or the access will hang.
> >
> > Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com
> > >
>
> Hi,
> what is the status of this patch? I found it "archived" in the dri-
> devel patchwork, should I be looking somewhere else?
ping
>
>
>
>
> > ---
> >
> > v2:
> > - rebase
> > - remove unnecessary argument of fsl_dcu_scfg_config_ls1021a()
> >
> >
> > drivers/gpu/drm/fsl-dcu/Kconfig | 1 +
> > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 25
> > +++++++++++++++++++++++
> > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 3 +++
> > 3 files changed, 29 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/fsl-dcu/Kconfig b/drivers/gpu/drm/fsl-
> > dcu/Kconfig
> > index d7dd8ba90e3a..9e5a35e7c00c 100644
> > --- a/drivers/gpu/drm/fsl-dcu/Kconfig
> > +++ b/drivers/gpu/drm/fsl-dcu/Kconfig
> > @@ -8,6 +8,7 @@ config DRM_FSL_DCU
> > select DRM_PANEL
> > select REGMAP_MMIO
> > select VIDEOMODE_HELPERS
> > + select MFD_SYSCON if SOC_LS1021A
> > help
> > Choose this option if you have an Freescale DCU chipset.
> > If M is selected the module will be called fsl-dcu-drm.
> > diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> > b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> > index 660fe573db96..b6b1cb75fc41 100644
> > --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> > +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> > @@ -50,6 +50,23 @@ static const struct regmap_config
> > fsl_dcu_regmap_config = {
> > .volatile_reg = fsl_dcu_drm_is_volatile_reg,
> > };
> >
> > +static int fsl_dcu_scfg_config_ls1021a(void)
> > +{
> > + struct regmap *scfg;
> > +
> > + scfg = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg");
> > + if (IS_ERR(scfg))
> > + return PTR_ERR(scfg);
> > +
> > + /*
> > + * For simplicity, enable the PIXCLK unconditionally. It might
> > + * be possible to disable the clock in PM or on unload as a
> > future
> > + * improvement.
> > + */
> > + return regmap_update_bits(scfg, SCFG_PIXCLKCR,
> > SCFG_PIXCLKCR_PXCEN,
> > + SCFG_PIXCLKCR_PXCEN);
> > +}
> > +
> > static void fsl_dcu_irq_reset(struct drm_device *dev)
> > {
> > struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
> > @@ -108,6 +125,14 @@ static int fsl_dcu_load(struct drm_device
> > *dev, unsigned long flags)
> > return ret;
> > }
> >
> > + if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu")) {
> > + ret = fsl_dcu_scfg_config_ls1021a();
> > + if (ret < 0) {
> > + dev_err(dev->dev, "failed to enable pixclk\n");
> > + goto done_vblank;
> > + }
> > + }
> > +
> > ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
> > if (ret < 0) {
> > dev_err(dev->dev, "failed to initialize vblank\n");
> > diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> > b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> > index e2049a0e8a92..566396013c04 100644
> > --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> > +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> > @@ -160,6 +160,9 @@
> > #define FSL_DCU_ARGB4444 12
> > #define FSL_DCU_YUV422 14
> >
> > +#define SCFG_PIXCLKCR 0x28
> > +#define SCFG_PIXCLKCR_PXCEN BIT(31)
> > +
> > #define VF610_LAYER_REG_NUM 9
> > #define LS1021A_LAYER_REG_NUM 10
> >
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-12-02 9:04 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-05 14:10 [PATCH v2] drm: fsl-dcu: enable PIXCLK on LS1021A Matthias Schiffer
2021-11-08 9:11 ` Matthias Schiffer
2021-11-08 9:11 ` Matthias Schiffer
2021-12-02 9:03 ` Matthias Schiffer
2021-12-02 9:03 ` Matthias Schiffer
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.