All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH net-next 0/4] igb: support PEROUT and EXTTS PTP pin functions on 82580/i354/i350
@ 2021-10-06 12:58 Ruud Bos
  2021-10-06 12:58 ` [PATCH net-next 1/4] igb: move SDP config initialization to separate function Ruud Bos
                   ` (4 more replies)
  0 siblings, 5 replies; 11+ messages in thread
From: Ruud Bos @ 2021-10-06 12:58 UTC (permalink / raw)
  To: netdev
  Cc: richardcochran, davem, kuba, jesse.brandeburg, anthony.l.nguyen,
	Ruud Bos

The igb driver provides support for PEROUT and EXTTS pin functions that
allow adapter external use of timing signals. At Hottinger Bruel & Kjaer we
are using the PEROUT function to feed a PTP corrected 1pps signal into an
FPGA as cross system synchronized time source.

Support for the PEROUT and EXTTS SDP functions is currently limited to
i210/i211 based adapters. This patch series enables these functions also
for 82580/i354/i350 based ones. Because the time registers of these
adapters do not have the nice split in second rollovers as the i210 has,
the implementation is slightly more complex compared to the i210
implementation.

The PEROUT function has been successfully tested on an i350 based ethernet
adapter. Using the following user space code excerpt, the driver outputs a
PTP corrected 1pps signal on the SDP0 pin of an i350:

    struct ptp_pin_desc desc;
    memset(&desc, 0, sizeof(desc));
    desc.index = 0;
    desc.func = PTP_PF_PEROUT;
    desc.chan = 0;
    if (ioctl(fd, PTP_PIN_SETFUNC, &desc) == 0) {
        struct timespec ts;
        if (clock_gettime(clkid, &ts) == 0) {
            struct ptp_perout_request rq;
            memset(&rq, 0, sizeof(rq));
            rq.index = 0;
            rq.start.sec = ts.tv_sec + 1;
            rq.start.nsec = 500000000;
            rq.period.sec  = 1;
            rq.period.nsec = 0;
            if (ioctl(fd, PTP_PEROUT_REQUEST, &rq) == 0) {
                /* 1pps signal is now available on SDP0 */
            }
        }
    }

The added EXTTS function has not been tested. However, looking at the data
sheets, the layout of the registers involved match the i210 exactly except
for the time registers mentioned before. Hence the almost identical
implementation.

Ruud Bos (4):
  igb: move SDP config initialization to separate function
  igb: move PEROUT and EXTTS isr logic to separate functions
  igb: support PEROUT on 82580/i354/i350
  support EXTTS on 82580/i354/i350

 drivers/net/ethernet/intel/igb/igb_main.c | 141 ++++++++++++-----
 drivers/net/ethernet/intel/igb/igb_ptp.c  | 183 ++++++++++++++++++++--
 2 files changed, 279 insertions(+), 45 deletions(-)

-- 
2.30.2


^ permalink raw reply	[flat|nested] 11+ messages in thread
* [PATCH net-next 0/4][pull request] 1GbE Intel Wired LAN Driver Updates 2021-12-29
@ 2021-12-29 18:40 Tony Nguyen
  2021-12-29 18:40 ` [PATCH net-next 3/4] igb: support PEROUT on 82580/i354/i350 Tony Nguyen
  0 siblings, 1 reply; 11+ messages in thread
From: Tony Nguyen @ 2021-12-29 18:40 UTC (permalink / raw)
  To: davem, kuba; +Cc: Tony Nguyen, netdev, kernel.hbk, richardcochran

Ruud Bos says:

The igb driver provides support for PEROUT and EXTTS pin functions that
allow adapter external use of timing signals. At Hottinger Bruel & Kjaer we
are using the PEROUT function to feed a PTP corrected 1pps signal into an
FPGA as cross system synchronized time source.

Support for the PEROUT and EXTTS SDP functions is currently limited to
i210/i211 based adapters. This patch series enables these functions also
for 82580/i354/i350 based ones. Because the time registers of these
adapters do not have the nice split in second rollovers as the i210 has,
the implementation is slightly more complex compared to the i210
implementation.

The PEROUT function has been successfully tested on an i350 based ethernet
adapter. Using the following user space code excerpt, the driver outputs a
PTP corrected 1pps signal on the SDP0 pin of an i350:

    struct ptp_pin_desc desc;
    memset(&desc, 0, sizeof(desc));
    desc.index = 0;
    desc.func = PTP_PF_PEROUT;
    desc.chan = 0;
    if (ioctl(fd, PTP_PIN_SETFUNC, &desc) == 0) {
        struct timespec ts;
        if (clock_gettime(clkid, &ts) == 0) {
            struct ptp_perout_request rq;
            memset(&rq, 0, sizeof(rq));
            rq.index = 0;
            rq.start.sec = ts.tv_sec + 1;
            rq.start.nsec = 500000000;
            rq.period.sec  = 1;
            rq.period.nsec = 0;
            if (ioctl(fd, PTP_PEROUT_REQUEST, &rq) == 0) {
                /* 1pps signal is now available on SDP0 */
            }
        }
    }

The added EXTTS function has not been tested. However, looking at the data
sheets, the layout of the registers involved match the i210 exactly except
for the time registers mentioned before. Hence the almost identical
implementation.

Acked-by: Richard Cochran <richardcochran@gmail.com>
---
Note: I made changes to fix RCT and checkpatch messages regarding
unnecessary parenthesis.

The following are changes since commit 9ed319e411915e882bb4ed99be3ae78667a70022:
  of: net: support NVMEM cells with MAC in text format
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue 1GbE

Ruud Bos (4):
  igb: move SDP config initialization to separate function
  igb: move PEROUT and EXTTS isr logic to separate functions
  igb: support PEROUT on 82580/i354/i350
  igb: support EXTTS on 82580/i354/i350

 drivers/net/ethernet/intel/igb/igb_main.c | 148 +++++++++++++----
 drivers/net/ethernet/intel/igb/igb_ptp.c  | 188 ++++++++++++++++++++--
 2 files changed, 291 insertions(+), 45 deletions(-)

-- 
2.31.1


^ permalink raw reply	[flat|nested] 11+ messages in thread
* [PATCH net-next 3/4] igb: support PEROUT on 82580/i354/i350
@ 2021-07-19  6:25 Ruud Bos
  0 siblings, 0 replies; 11+ messages in thread
From: Ruud Bos @ 2021-07-19  6:25 UTC (permalink / raw)
  To: netdev

Support for the PEROUT PTP pin function on 82580/i354/i350 based adapters.
Because the time registers of these adapters do not have the nice split in
second rollovers as the i210 has, the implementation is slightly more
complex compared to the i210 implementation.

Signed-off-by: Ruud Bos <ruud.bos@hbkworld.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c |  54 +++++++++-
 drivers/net/ethernet/intel/igb/igb_ptp.c  | 122 +++++++++++++++++++++-
 2 files changed, 172 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 928ac9ba1c66..8d87166e5ecb 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -6731,8 +6731,57 @@ static void igb_perout(struct igb_adapter *adapter, int sdp)
                return;

        spin_lock(&adapter->tmreg_lock);
-       ts = timespec64_add(adapter->perout[sdp].start,
-                           adapter->perout[sdp].period);
+
+       if ((hw->mac.type == e1000_82580) ||
+           (hw->mac.type == e1000_i354) ||
+           (hw->mac.type == e1000_i350)) {
+               u32 systiml, systimh, level_mask, level, rem;
+               u64 systim, now;
+               s64 ns = timespec64_to_ns(&adapter->perout[sdp].period);
+
+               /* read systim registers in sequence */
+               rd32(E1000_SYSTIMR);
+               systiml = rd32(E1000_SYSTIML);
+               systimh = rd32(E1000_SYSTIMH);
+               systim = (((u64)(systimh & 0xFF)) << 32) | ((u64)systiml);
+               now = timecounter_cyc2time(&adapter->tc, systim);
+
+               level_mask = (sdp == 1) ? 0x80000 : 0x40000;
+               level = (rd32(E1000_CTRL) & level_mask) ? 1 : 0;
+
+               div_u64_rem(now, ns, &rem);
+               systim = systim + (ns - rem);
+
+               /* synchronize pin level with rising/falling edges */
+               div_u64_rem(now, ns << 1, &rem);
+               if (rem < ns) {
+                       /* first half of period */
+                       if (level == 0) {
+                               /* output is already low, skip this period */
+                               systim += ns;
+                               pr_notice("igb: periodic output on %s missed falling edge\n",
+                                         adapter->sdp_config[sdp].name);
+                       }
+               } else {
+                       /* second half of period */
+                       if (level == 1) {
+                               /* output is already high, skip this period */
+                               systim += ns;
+                               pr_notice("igb: periodic output on %s missed rising edge\n",
+                                         adapter->sdp_config[sdp].name);
+                       }
+               }
+
+               /* for this chip family tv_sec is the upper part of the binary value,
+                * so not seconds
+                */
+               ts.tv_nsec = (u32)systim;
+               ts.tv_sec  = ((u32)(systim >> 32)) & 0xFF;
+       } else {
+               ts = timespec64_add(adapter->perout[sdp].start,
+                                   adapter->perout[sdp].period);
+       }
+
        /* u32 conversion of tv_sec is safe until y2106 */
        wr32((sdp == 1) ? E1000_TRGTTIML1 : E1000_TRGTTIML0, ts.tv_nsec);
        wr32((sdp == 1) ? E1000_TRGTTIMH1 : E1000_TRGTTIMH0, (u32)ts.tv_sec);
@@ -6740,6 +6789,7 @@ static void igb_perout(struct igb_adapter *adapter, int sdp)
        tsauxc |= TSAUXC_EN_TT0;
        wr32(E1000_TSAUXC, tsauxc);
        adapter->perout[sdp].start = ts;
+
        spin_unlock(&adapter->tmreg_lock);
 }

diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index c78d0c2a5341..64a949bb5d8a 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -508,6 +508,119 @@ static void igb_pin_perout(struct igb_adapter *igb, int chan, int pin, int freq)
        wr32(E1000_CTRL_EXT, ctrl_ext);
 }

+static int igb_ptp_feature_enable_82580(struct ptp_clock_info *ptp,
+                                       struct ptp_clock_request *rq, int on)
+{
+       struct igb_adapter *igb =
+               container_of(ptp, struct igb_adapter, ptp_caps);
+       struct e1000_hw *hw = &igb->hw;
+       u32 tsauxc, tsim, tsauxc_mask, tsim_mask, trgttiml, trgttimh, systiml,
+               systimh, level_mask, level, rem;
+       unsigned long flags;
+       struct timespec64 ts, start;
+       int pin = -1;
+       s64 ns;
+       u64 systim, now;
+
+       switch (rq->type) {
+       case PTP_CLK_REQ_EXTTS:
+               return -EOPNOTSUPP;
+
+       case PTP_CLK_REQ_PEROUT:
+               /* Reject requests with unsupported flags */
+               if (rq->perout.flags)
+                       return -EOPNOTSUPP;
+
+               if (on) {
+                       pin = ptp_find_pin(igb->ptp_clock, PTP_PF_PEROUT,
+                                          rq->perout.index);
+                       if (pin < 0)
+                               return -EBUSY;
+               }
+               ts.tv_sec = rq->perout.period.sec;
+               ts.tv_nsec = rq->perout.period.nsec;
+               ns = timespec64_to_ns(&ts);
+               ns = ns >> 1;
+               if (on && (ns < 8LL))
+                       return -EINVAL;
+               ts = ns_to_timespec64(ns);
+               if (rq->perout.index == 1) {
+                       tsauxc_mask = TSAUXC_EN_TT1;
+                       tsim_mask = TSINTR_TT1;
+                       trgttiml = E1000_TRGTTIML1;
+                       trgttimh = E1000_TRGTTIMH1;
+               } else {
+                       tsauxc_mask = TSAUXC_EN_TT0;
+                       tsim_mask = TSINTR_TT0;
+                       trgttiml = E1000_TRGTTIML0;
+                       trgttimh = E1000_TRGTTIMH0;
+               }
+               spin_lock_irqsave(&igb->tmreg_lock, flags);
+               tsauxc = rd32(E1000_TSAUXC);
+               tsim = rd32(E1000_TSIM);
+               if (rq->perout.index == 1) {
+                       tsauxc &= ~(TSAUXC_EN_TT1 | TSAUXC_EN_CLK1 | TSAUXC_ST1);
+                       tsim &= ~TSINTR_TT1;
+               } else {
+                       tsauxc &= ~(TSAUXC_EN_TT0 | TSAUXC_EN_CLK0 | TSAUXC_ST0);
+                       tsim &= ~TSINTR_TT0;
+               }
+               if (on) {
+                       int i = rq->perout.index;
+
+                       /* read systim registers in sequence */
+                       rd32(E1000_SYSTIMR);
+                       systiml = rd32(E1000_SYSTIML);
+                       systimh = rd32(E1000_SYSTIMH);
+                       systim = (((u64)(systimh & 0xFF)) << 32) | ((u64)systiml);
+                       now = timecounter_cyc2time(&igb->tc, systim);
+
+                       level_mask = (pin == 1) ? 0x80000 : 0x40000;
+                       level = (rd32(E1000_CTRL) & level_mask) ? 1 : 0;
+
+                       div_u64_rem(now, ns, &rem);
+                       systim = systim + (ns - rem);
+
+                       /* synchronize pin level with rising/falling edges */
+                       div_u64_rem(now, ns << 1, &rem);
+                       if (rem < ns) {
+                               /* first half of period */
+                               if (level == 0) {
+                                       /* output is already low, skip this period */
+                                       systim += ns;
+                               }
+                       } else {
+                               /* second half of period */
+                               if (level == 1) {
+                                       /* output is already high, skip this period */
+                                       systim += ns;
+                               }
+                       }
+
+                       start = ns_to_timespec64(systim + (ns - rem));
+                       igb_pin_perout(igb, i, pin, 0);
+                       igb->perout[i].start.tv_sec = start.tv_sec;
+                       igb->perout[i].start.tv_nsec = start.tv_nsec;
+                       igb->perout[i].period.tv_sec = ts.tv_sec;
+                       igb->perout[i].period.tv_nsec = ts.tv_nsec;
+
+                       wr32(trgttiml, (u32)systim);
+                       wr32(trgttimh, ((u32)(systim >> 32)) & 0xFF);
+                       tsauxc |= tsauxc_mask;
+                       tsim |= tsim_mask;
+               }
+               wr32(E1000_TSAUXC, tsauxc);
+               wr32(E1000_TSIM, tsim);
+               spin_unlock_irqrestore(&igb->tmreg_lock, flags);
+               return 0;
+
+       case PTP_CLK_REQ_PPS:
+               return -EOPNOTSUPP;
+       }
+
+       return -EOPNOTSUPP;
+}
+
 static int igb_ptp_feature_enable_i210(struct ptp_clock_info *ptp,
                                       struct ptp_clock_request *rq, int on)
 {
@@ -1215,16 +1328,21 @@ void igb_ptp_init(struct igb_adapter *adapter)
        case e1000_82580:
        case e1000_i354:
        case e1000_i350:
+               igb_ptp_sdp_init(adapter);
                snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr);
                adapter->ptp_caps.owner = THIS_MODULE;
                adapter->ptp_caps.max_adj = 62499999;
-               adapter->ptp_caps.n_ext_ts = 0;
+               adapter->ptp_caps.n_ext_ts = IGB_N_EXTTS;
+               adapter->ptp_caps.n_per_out = IGB_N_PEROUT;
+               adapter->ptp_caps.n_pins = IGB_N_SDP;
                adapter->ptp_caps.pps = 0;
+               adapter->ptp_caps.pin_config = adapter->sdp_config;
                adapter->ptp_caps.adjfine = igb_ptp_adjfine_82580;
                adapter->ptp_caps.adjtime = igb_ptp_adjtime_82576;
                adapter->ptp_caps.gettimex64 = igb_ptp_gettimex_82580;
                adapter->ptp_caps.settime64 = igb_ptp_settime_82576;
-               adapter->ptp_caps.enable = igb_ptp_feature_enable;
+               adapter->ptp_caps.enable = igb_ptp_feature_enable_82580;
+               adapter->ptp_caps.verify = igb_ptp_verify_pin;
                adapter->cc.read = igb_ptp_read_82580;
                adapter->cc.mask = CYCLECOUNTER_MASK(IGB_NBITS_82580);
                adapter->cc.mult = 1;
--
2.30.2


UNRESTRICTED
HBK Benelux B.V., Schutweg 15a, NL-5145 NP Waalwijk, The Netherlands www.hbkworld.com Registered as B.V. (Dutch limited liability company) in the Dutch commercial register 08183075 0000 Company domiciled in Waalwijk Managing Directors : Alexandra Hellemans, Jens Wiegand, Jorn Bagijn The information in this email is confidential. It is intended solely for the addressee. If you are not the intended recipient, please let me know and delete this email.

^ permalink raw reply related	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2021-12-29 18:41 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-06 12:58 [PATCH net-next 0/4] igb: support PEROUT and EXTTS PTP pin functions on 82580/i354/i350 Ruud Bos
2021-10-06 12:58 ` [PATCH net-next 1/4] igb: move SDP config initialization to separate function Ruud Bos
2021-10-06 12:58 ` [PATCH net-next 2/4] igb: move PEROUT and EXTTS isr logic to separate functions Ruud Bos
2021-10-06 12:58 ` [PATCH net-next 3/4] igb: support PEROUT on 82580/i354/i350 Ruud Bos
2021-10-06 12:58 ` [PATCH net-next 4/4] support EXTTS " Ruud Bos
2021-10-06 13:09 ` [PATCH net-next 0/4] igb: support PEROUT and EXTTS PTP pin functions " Ruud Bos
2021-10-12 15:43   ` Ruud Bos
2021-10-12 15:49     ` Jakub Kicinski
2021-10-12 15:53       ` Nguyen, Anthony L
  -- strict thread matches above, loose matches on Subject: below --
2021-12-29 18:40 [PATCH net-next 0/4][pull request] 1GbE Intel Wired LAN Driver Updates 2021-12-29 Tony Nguyen
2021-12-29 18:40 ` [PATCH net-next 3/4] igb: support PEROUT on 82580/i354/i350 Tony Nguyen
2021-07-19  6:25 Ruud Bos

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.