From: Luca Weiss <luca@z3ntu.xyz>
To: linux-arm-msm@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht,
konrad.dybcio@somainline.org, Luca Weiss <luca@z3ntu.xyz>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 11/11] arm64: dts: qcom: sm7225: Add device tree for Fairphone 4
Date: Thu, 7 Oct 2021 23:24:38 +0200 [thread overview]
Message-ID: <20211007212444.328034-12-luca@z3ntu.xyz> (raw)
In-Reply-To: <20211007212444.328034-1-luca@z3ntu.xyz>
Add device tree for the Fairphone 4 smartphone which is based on
Snapdragon 750G (sm7225) which is basically sm6350.
Currently supported are UART, physical buttons (power & volume), screen
(based on simple-framebuffer set up by the bootloader), regulators and
USB.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
v2: improve pinctrl node for volume buttons and add R-b
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/sm7225-fairphone-fp4.dts | 320 ++++++++++++++++++
2 files changed, 321 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 59ece83abad0..9ed189e9c197 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -85,6 +85,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
new file mode 100644
index 000000000000..8d6fd22873e0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm7225.dtsi"
+#include "pm6350.dtsi"
+
+/ {
+ model = "Fairphone 4";
+ compatible = "fairphone,fp4", "qcom,sm7225";
+
+ /* required for bootloader to select correct board */
+ qcom,msm-id = <434 0x10000>, <459 0x10000>;
+ qcom,board-id = <8 32>;
+
+ aliases {
+ serial0 = &uart2;
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ stdout-path = "serial0:115200n8";
+
+ framebuffer0: framebuffer@a000000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0xa0000000 0 (2340 * 1080 * 4)>;
+ width = <1080>;
+ height = <2340>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin>;
+
+ volume-up {
+ label = "volume_up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&apps_rsc {
+ pm6350-rpmh-regulators {
+ compatible = "qcom,pm6350-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vreg_s1a: smps1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vreg_s2a: smps2 {
+ regulator-min-microvolt = <1503000>;
+ regulator-max-microvolt = <2048000>;
+ };
+
+ vreg_l2a: ldo2 {
+ regulator-min-microvolt = <1503000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3a: ldo3 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4a: ldo4 {
+ regulator-min-microvolt = <352000>;
+ regulator-max-microvolt = <801000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a: ldo5 {
+ regulator-min-microvolt = <1503000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a: ldo6 {
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a: ldo7 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8a: ldo8 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a: ldo9 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3401000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11a: ldo11 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12a: ldo12 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13a: ldo13 {
+ regulator-min-microvolt = <570000>;
+ regulator-max-microvolt = <650000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14a: ldo14 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15a: ldo15 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1305000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16a: ldo16 {
+ regulator-min-microvolt = <830000>;
+ regulator-max-microvolt = <921000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18a: ldo18 {
+ regulator-min-microvolt = <788000>;
+ regulator-max-microvolt = <1049000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l19a: ldo19 {
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1305000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l20a: ldo20 {
+ regulator-min-microvolt = <530000>;
+ regulator-max-microvolt = <801000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l21a: ldo21 {
+ regulator-min-microvolt = <751000>;
+ regulator-max-microvolt = <825000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l22a: ldo22 {
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1305000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pm6150l-rpmh-regulators {
+ compatible = "qcom,pm6150l-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vreg_s8e: smps8 {
+ regulator-min-microvolt = <313000>;
+ regulator-max-microvolt = <1395000>;
+ };
+
+ vreg_l1e: ldo1 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2e: ldo2 {
+ regulator-min-microvolt = <1170000>;
+ regulator-max-microvolt = <1305000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e: ldo3 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1299000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4e: ldo4 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5e: ldo5 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6e: ldo6 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7e: ldo7 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8e: ldo8 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9e: ldo9 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10e: ldo10 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3401000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11e: ldo11 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3401000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <5492000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ regulator-allow-bypass;
+ };
+ };
+};
+
+&pm6350_gpios {
+ gpio_keys_pin: gpio-keys-pin {
+ pins = "gpio2";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ bias-pull-up;
+ input-enable;
+ power-source = <0>;
+ };
+};
+
+&pm6350_resin {
+ status = "okay";
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <13 4>, <56 2>;
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ maximum-speed = "super-speed";
+ dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+
+ vdd-supply = <&vreg_l18a>;
+ vdda-pll-supply = <&vreg_l2a>;
+ vdda-phy-dpdm-supply = <&vreg_l3a>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l22a>;
+ vdda-pll-supply = <&vreg_l16a>;
+};
--
2.33.0
next prev parent reply other threads:[~2021-10-07 21:25 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-07 21:24 [PATCH v2 00/11] Initial Fairphone 4 support Luca Weiss
2021-10-07 21:24 ` [PATCH v2 01/11] clk: qcom: add select QCOM_GDSC for SM6350 Luca Weiss
2021-10-13 18:44 ` Stephen Boyd
2021-10-07 21:24 ` [PATCH v2 02/11] dt-bindings: regulator: qcom,rpmh: Add compatible for PM6350 Luca Weiss
2021-10-18 19:53 ` Rob Herring
2021-10-07 21:24 ` [PATCH v2 03/11] regulator: qcom-rpmh: Add PM6350 regulators Luca Weiss
2021-10-07 21:24 ` [PATCH v2 04/11] dt-bindings: pinctrl: qcom,pmic-gpio: Add compatible for PM6350 Luca Weiss
2021-10-12 23:48 ` Linus Walleij
2021-10-07 21:24 ` [PATCH v2 05/11] pinctrl: qcom: spmi-gpio: " Luca Weiss
2021-10-12 23:48 ` Linus Walleij
2021-10-07 21:24 ` [PATCH v2 06/11] arm64: dts: qcom: Add PM6350 PMIC Luca Weiss
2021-10-07 21:24 ` [PATCH v2 07/11] arm64: dts: qcom: sm6350: add debug uart Luca Weiss
2021-10-07 21:24 ` [PATCH v2 08/11] dt-bindings: arm: cpus: Add Kryo 570 CPUs Luca Weiss
2021-10-18 19:55 ` Rob Herring
2021-10-07 21:24 ` [PATCH v2 09/11] dt-bindings: arm: qcom: Document sm7225 and fairphone,fp4 board Luca Weiss
2021-10-18 19:56 ` Rob Herring
2021-10-07 21:24 ` [PATCH v2 10/11] arm64: dts: qcom: Add SM7225 device tree Luca Weiss
2021-10-07 21:24 ` Luca Weiss [this message]
2021-10-22 0:52 ` (subset) [PATCH v2 00/11] Initial Fairphone 4 support Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211007212444.328034-12-luca@z3ntu.xyz \
--to=luca@z3ntu.xyz \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.