[PATCH v2 0/3] add initial support for exynosautov9

[PATCH v2 0/3] add initial support for exynosautov9

[Chanho Park]

This patchset supports minimal set for ExynosAuto v9 SoC and SADK board.
This contains serial_0 as uart console and ufs_0 for rootfs storage.
Regarding UFS, it depends on UFS patchset[1].

[1]: https://lore.kernel.org/linux-samsung-soc/20211007080934.108804-1-chanho61.park@samsung.com/T/#t

Changes since v1:
- add static and  __initconst of patch1
- Use pin and pins suffix for pinctrl nodes
- Remove non-SoC pins
- Move fixed rate clock nodes out of soc@0
- Add cortex-a76 compatibles to cpu and pmu node.
- Use lowercase of address representations
- Add pmu / syscon compatible.

Chanho Park (3):
  pinctrl: samsung: support ExynosAutov9 SoC pinctrl
  arm64: dts: exynos: add initial support for exynosautov9 SoC
  arm64: dts: exynos: add minimal support for exynosautov9 sadk board

 .../bindings/arm/samsung/samsung-boards.yaml  |    6 +
 .../devicetree/bindings/mfd/syscon.yaml       |    1 +
 .../bindings/pinctrl/samsung-pinctrl.txt      |    1 +
 arch/arm64/boot/dts/exynos/Makefile           |    3 +-
 .../boot/dts/exynos/exynosautov9-pinctrl.dtsi | 1189 +++++++++++++++++
 .../boot/dts/exynos/exynosautov9-sadk.dts     |   56 +
 arch/arm64/boot/dts/exynos/exynosautov9.dtsi  |  301 +++++
 .../pinctrl/samsung/pinctrl-exynos-arm64.c    |  108 ++
 drivers/pinctrl/samsung/pinctrl-samsung.c     |    2 +
 drivers/pinctrl/samsung/pinctrl-samsung.h     |    1 +
 10 files changed, 1667 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
 create mode 100644 arch/arm64/boot/dts/exynos/exynosautov9.dtsi

-- 
2.33.0

[PATCH v2 1/3] pinctrl: samsung: support ExynosAutov9 SoC pinctrl

[Chanho Park]

Add pinctrl data for ExynosAuto v9 SoC.

- GPA0, GPA1: 10, External wake up interrupt
- GPQ0: 2, XbootLDO, Speedy PMIC I/F
- GPB0, GPB1, GPB2, GPB3: 29, I2S 7 CH
- GPF0, GPF1, GPF2, GPF3,GPF4, GPF5, GPF6, GPF8: 52, FSYS
- GPG0, GPG1, GPG2, GPG3: 25, GPIO x 24, SMPL_INT
- GPP0, GPP1, GPP2, GPP3, GPP4, GPP5: 48, USI 12 CH

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
---
 .../bindings/pinctrl/samsung-pinctrl.txt      |   1 +
 .../pinctrl/samsung/pinctrl-exynos-arm64.c    | 108 ++++++++++++++++++
 drivers/pinctrl/samsung/pinctrl-samsung.c     |   2 +
 drivers/pinctrl/samsung/pinctrl-samsung.h     |   1 +
 4 files changed, 112 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index e7a1b1880375..b8b475967ff9 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -23,6 +23,7 @@ Required Properties:
   - "samsung,exynos5433-pinctrl": for Exynos5433 compatible pin-controller.
   - "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller.
   - "samsung,exynos850-pinctrl": for Exynos850 compatible pin-controller.
+  - "samsung,exynosautov9-pinctrl": for ExynosAutov9 compatible pin-controller.
 
 - reg: Base address of the pin controller hardware module and length of
   the address space it occupies.
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
index fe5f6046fbd5..6b77fd24571e 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
@@ -538,3 +538,111 @@ const struct samsung_pinctrl_of_match_data exynos850_of_data __initconst = {
 	.ctrl		= exynos850_pin_ctrl,
 	.num_ctrl	= ARRAY_SIZE(exynos850_pin_ctrl),
 };
+
+/* pin banks of exynosautov9 pin-controller 0 (ALIVE) */
+static const struct samsung_pin_bank_data exynosautov9_pin_banks0[] __initconst = {
+	EXYNOS850_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00),
+	EXYNOS850_PIN_BANK_EINTW(2, 0x020, "gpa1", 0x04),
+	EXYNOS850_PIN_BANK_EINTN(2, 0x040, "gpq0"),
+};
+
+/* pin banks of exynosautov9 pin-controller 1 (AUD) */
+static const struct samsung_pin_bank_data exynosautov9_pin_banks1[] __initconst = {
+	EXYNOS850_PIN_BANK_EINTG(5, 0x000, "gpb0", 0x00),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x020, "gpb1", 0x04),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x040, "gpb2", 0x08),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x060, "gpb3", 0x0C),
+};
+
+/* pin banks of exynosautov9 pin-controller 2 (FSYS0) */
+static const struct samsung_pin_bank_data exynosautov9_pin_banks2[] __initconst = {
+	EXYNOS850_PIN_BANK_EINTG(6, 0x000, "gpf0", 0x00),
+	EXYNOS850_PIN_BANK_EINTG(6, 0x020, "gpf1", 0x04),
+};
+
+/* pin banks of exynosautov9 pin-controller 3 (FSYS1) */
+static const struct samsung_pin_bank_data exynosautov9_pin_banks3[] __initconst = {
+	EXYNOS850_PIN_BANK_EINTG(6, 0x000, "gpf8", 0x00),
+};
+
+/* pin banks of exynosautov9 pin-controller 4 (FSYS2) */
+static const struct samsung_pin_bank_data exynosautov9_pin_banks4[] __initconst = {
+	EXYNOS850_PIN_BANK_EINTG(4, 0x000, "gpf2", 0x00),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x020, "gpf3", 0x04),
+	EXYNOS850_PIN_BANK_EINTG(7, 0x040, "gpf4", 0x08),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x060, "gpf5", 0x0C),
+	EXYNOS850_PIN_BANK_EINTG(7, 0x080, "gpf6", 0x10),
+};
+
+/* pin banks of exynosautov9 pin-controller 5 (PERIC0) */
+static const struct samsung_pin_bank_data exynosautov9_pin_banks5[] __initconst = {
+	EXYNOS850_PIN_BANK_EINTG(8, 0x000, "gpp0", 0x00),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x020, "gpp1", 0x04),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x040, "gpp2", 0x08),
+	EXYNOS850_PIN_BANK_EINTG(5, 0x060, "gpg0", 0x0C),
+};
+
+/* pin banks of exynosautov9 pin-controller 6 (PERIC1) */
+static const struct samsung_pin_bank_data exynosautov9_pin_banks6[] __initconst = {
+	EXYNOS850_PIN_BANK_EINTG(8, 0x000, "gpp3", 0x00),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x020, "gpp4", 0x04),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x040, "gpp5", 0x08),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x060, "gpg1", 0x0C),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x080, "gpg2", 0x10),
+	EXYNOS850_PIN_BANK_EINTG(4, 0x0A0, "gpg3", 0x14),
+};
+
+static const struct samsung_pin_ctrl exynosautov9_pin_ctrl[] __initconst = {
+	{
+		/* pin-controller instance 0 ALIVE data */
+		.pin_banks      = exynosautov9_pin_banks0,
+		.nr_banks       = ARRAY_SIZE(exynosautov9_pin_banks0),
+		.eint_wkup_init = exynos_eint_wkup_init,
+		.suspend        = exynos_pinctrl_suspend,
+		.resume         = exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 1 AUD data */
+		.pin_banks      = exynosautov9_pin_banks1,
+		.nr_banks       = ARRAY_SIZE(exynosautov9_pin_banks1),
+	}, {
+		/* pin-controller instance 2 FSYS0 data */
+		.pin_banks      = exynosautov9_pin_banks2,
+		.nr_banks       = ARRAY_SIZE(exynosautov9_pin_banks2),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend        = exynos_pinctrl_suspend,
+		.resume         = exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 3 FSYS1 data */
+		.pin_banks      = exynosautov9_pin_banks3,
+		.nr_banks       = ARRAY_SIZE(exynosautov9_pin_banks3),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend        = exynos_pinctrl_suspend,
+		.resume         = exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 4 FSYS2 data */
+		.pin_banks      = exynosautov9_pin_banks4,
+		.nr_banks       = ARRAY_SIZE(exynosautov9_pin_banks4),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend        = exynos_pinctrl_suspend,
+		.resume         = exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 5 PERIC0 data */
+		.pin_banks      = exynosautov9_pin_banks5,
+		.nr_banks       = ARRAY_SIZE(exynosautov9_pin_banks5),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend        = exynos_pinctrl_suspend,
+		.resume         = exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 6 PERIC1 data */
+		.pin_banks      = exynosautov9_pin_banks6,
+		.nr_banks       = ARRAY_SIZE(exynosautov9_pin_banks6),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend        = exynos_pinctrl_suspend,
+		.resume         = exynos_pinctrl_resume,
+	},
+};
+
+const struct samsung_pinctrl_of_match_data exynosautov9_of_data __initconst = {
+	.ctrl		= exynosautov9_pin_ctrl,
+	.num_ctrl	= ARRAY_SIZE(exynosautov9_pin_ctrl),
+};
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index 2a0fc63516f1..23f355ae9ca0 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -1266,6 +1266,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
 		.data = &exynos7_of_data },
 	{ .compatible = "samsung,exynos850-pinctrl",
 		.data = &exynos850_of_data },
+	{ .compatible = "samsung,exynosautov9-pinctrl",
+		.data = &exynosautov9_of_data },
 #endif
 #ifdef CONFIG_PINCTRL_S3C64XX
 	{ .compatible = "samsung,s3c64xx-pinctrl",
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h
index 4c2149e9c544..547968a31aed 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.h
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.h
@@ -340,6 +340,7 @@ extern const struct samsung_pinctrl_of_match_data exynos5420_of_data;
 extern const struct samsung_pinctrl_of_match_data exynos5433_of_data;
 extern const struct samsung_pinctrl_of_match_data exynos7_of_data;
 extern const struct samsung_pinctrl_of_match_data exynos850_of_data;
+extern const struct samsung_pinctrl_of_match_data exynosautov9_of_data;
 extern const struct samsung_pinctrl_of_match_data s3c64xx_of_data;
 extern const struct samsung_pinctrl_of_match_data s3c2412_of_data;
 extern const struct samsung_pinctrl_of_match_data s3c2416_of_data;
-- 
2.33.0

[PATCH v2 2/3] arm64: dts: exynos: add initial support for exynosautov9 SoC

[Chanho Park]

Add minimal support for ExynosAuto v9 SoC[1].

- Enumarate all pinctrl nodes
- UART with exynos850 compatible
- UFS0 HCI + Phy

Like exynos850, this also uses fixed-rate clock nodes until clock driver
has been supported. The clock nodes are initialized on bootloader stage
thus we don't need to control them so far.

[1]: https://www.samsung.com/semiconductor/minisite/exynos/products/automotiveprocessor/exynos-auto-v9/

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
---
 .../devicetree/bindings/mfd/syscon.yaml       |    1 +
 .../boot/dts/exynos/exynosautov9-pinctrl.dtsi | 1189 +++++++++++++++++
 arch/arm64/boot/dts/exynos/exynosautov9.dtsi  |  301 +++++
 3 files changed, 1491 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynosautov9.dtsi

diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index abe3fd817e0b..75dcbb741010 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -55,6 +55,7 @@ properties:
               - samsung,exynos4-sysreg
               - samsung,exynos5-sysreg
               - samsung,exynos5433-sysreg
+              - samsung,exynosautov9-sysreg
 
           - const: syscon
 
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
new file mode 100644
index 000000000000..8489b9bea3c9
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
@@ -0,0 +1,1189 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov9 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2021 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's ExynosAutov9 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ */
+
+#include <dt-bindings/pinctrl/samsung.h>
+
+&pinctrl_alive {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	dp0_hpd_pin: dp0-hpd-pin {
+		samsung,pins = "gpa1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	dp1_hpd_pin: dp1-hpd-pin {
+		samsung,pins = "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	gpq0: gpq0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	speedy0_pin: speedy0-pin {
+		samsung,pins = "gpq0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	speedy1_pin: speedy1-pin {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&pinctrl_aud {
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	aud_codec_mclk_pin: aud-codec-mclk-pin {
+		samsung,pins = "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_codec_mclk_idle_pin: aud-codec-mclk-idle-pin {
+		samsung,pins = "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s0_pins: aud-i2s0-pins {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s0_idle_pins_pins: aud-i2s0-idle-pins-pins {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s1_pins: aud-i2s1-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s1_idle_pins: aud-i2s1-idle-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s2_pins: aud-i2s2-pins {
+		samsung,pins = "gpb1-4", "gpb1-5", "gpb1-6", "gpb1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s2_idle_pins: aud-i2s2-idle-pins {
+		samsung,pins = "gpb1-4", "gpb1-5", "gpb1-6", "gpb1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s3_pins: aud-i2s3-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s3_idle_pins: aud-i2s3-idle-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s4_pins: aud-i2s4-pins {
+		samsung,pins = "gpb2-4", "gpb2-5", "gpb2-6", "gpb2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s4_idle_pins: aud-i2s4-idle-pins {
+		samsung,pins = "gpb2-4", "gpb2-5", "gpb2-6", "gpb2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s5_pins: aud-i2s5-pins {
+		samsung,pins = "gpb3-0", "gpb3-1", "gpb3-2", "gpb3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s5_idle_pins: aaud-i2s5-idle-pins {
+		samsung,pins = "gpb3-0", "gpb3-1", "gpb3-2", "gpb3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s6_pins: aud-i2s6-pins {
+		samsung,pins = "gpb3-4", "gpb3-5", "gpb3-6", "gpb3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s6_idle_pins: aaud-i2s6-idle-pins {
+		samsung,pins = "gpb3-4", "gpb3-5", "gpb3-6", "gpb3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_fsys0 {
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcie_clkreq0_pin: pcie-clkreq0-pin {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie_perst0_out_pin: pcie-perst0-out-pin {
+		samsung,pins = "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_perst0_in_pin: pcie-perst0-in-pin {
+		samsung,pins = "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_clkreq1_pin: pcie-clkreq1-pin {
+		samsung,pins = "gpf0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie_perst1_out_pin: pcie-perst1-out-pin {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_perst1_in_pin: pcie-perst1-in-pin {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_clkreq2_pin: pcie-clkreq2-pin {
+		samsung,pins = "gpf0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie_perst2_out_pin: pcie-perst2-out-pin {
+		samsung,pins = "gpf0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_perst2_in_pin: pcie-perst2-in-pin {
+		samsung,pins = "gpf0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_clkreq3_pin: pcie-clkreq3-pin {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie_perst3_out_pin: pcie-perst3-out-pin {
+		samsung,pins = "gpf1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_perst3_in_pin: pcie-perst3-in-pin {
+		samsung,pins = "gpf1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_clkreq4_pin: pcie-clkreq4-pin {
+		samsung,pins = "gpf1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie_perst4_out_pin: pcie-perst4-out-pin {
+		samsung,pins = "gpf1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_perst4_in_pin: pcie-perst4-in-pin {
+		samsung,pins = "gpf1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_clkreq5_pin: pcie-clkreq5-pin {
+		samsung,pins = "gpf1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie_perst5_out_pin: pcie-perst5-out-pin {
+		samsung,pins = "gpf1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_perst5_in_pin: pcie-perst5-in-pin {
+		samsung,pins = "gpf1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_fsys1 {
+	gpf8: gpf8 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk_pin: sd2-clk-pin {
+		samsung,pins = "gpf8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <2>;	/* 2x drive strength */
+	};
+
+	sd2_cmd_pin: sd2-cmd-pin {
+		samsung,pins = "gpf8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <2>;	/* 2x drive strength */
+	};
+
+	sd2_width1_pin: sd2-width1-pin {
+		samsung,pins = "gpf8-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <2>;	/* 2x drive strength */
+	};
+
+	sd2_width4_pins: sd2-width4-pins {
+		samsung,pins = "gpf8-3", "gpf8-4", "gpf8-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <2>;	/* 2x drive strength */
+	};
+};
+
+&pinctrl_fsys2 {
+	gpf2: gpf2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf5: gpf5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf6: gpf6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ufs_rst_n_pin: ufs-rst-n-pin {
+		samsung,pins = "gpf2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	ufs_refclk_out_pin: ufs-refclk-out-pin {
+		samsung,pins = "gpf2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	ufs_rst_n_1_pin: ufs-rst-n-1-pin {
+		samsung,pins = "gpf2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	ufs_refclk_out_1_pin: ufs-refclk-out-1-pin {
+		samsung,pins = "gpf2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	eth0_mdc_mdio_pins: eth0-mdc-mdio-pins {
+		samsung,pins = "gpf4-5", "gpf4-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	eth0_rgmii_pins: eth0-rgmii-pins {
+		samsung,pins = "gpf3-1", "gpf3-2", "gpf3-3", "gpf3-4",
+			       "gpf3-5", "gpf3-6", "gpf3-7", "gpf4-0",
+			       "gpf4-1", "gpf4-2", "gpf4-3", "gpf4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	eth0_pps_out_pin: eth0-pps-out-pin {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	eth1_mdc_mdio_pins: eth1-mdc-mdio-pins {
+		samsung,pins = "gpf6-5", "gpf6-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	eth1_rgmii_pins: eth1-rgmii-pins {
+		samsung,pins = "gpf5-1", "gpf5-2", "gpf5-3", "gpf5-4",
+			       "gpf5-5", "gpf5-6", "gpf5-7", "gpf6-0",
+			       "gpf6-1", "gpf6-2", "gpf6-3", "gpf6-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	eth1_pps_out_pin: eth1-pps-out-pin {
+		samsung,pins = "gpf5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpp0: gpp0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pwm_tout0_pin: pwm-tout0-pin {
+		samsung,pins = "gpg0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout1_pin: pwm-tout1-pin {
+		samsung,pins = "gpg0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout2_pin: pwm-tout2-pin {
+		samsung,pins = "gpg0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout3_pin: pwm-tout3-pin {
+		samsung,pins = "gpg0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI00  */
+	hsi2c0_pins: hsi2c0-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI00_I2C */
+	hsi2c1_pins: hsi2c1-pins {
+		samsung,pins = "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI01 */
+	hsi2c2_pins: hsi2c2-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI01_I2C */
+	hsi2c3_pins: hsi2c3-pins {
+		samsung,pins = "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI02 */
+	hsi2c4_pins: hsi2c4-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI02_I2C */
+	hsi2c5_pins: hsi2c5-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI03 */
+	hsi2c6_pins: hsi2c6-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI03_I2C */
+	hsi2c7_pins: hsi2c7-pins {
+		samsung,pins = "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI04 */
+	hsi2c8_pins: hsi2c8-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI04_I2C */
+	hsi2c9_pins: hsi2c9-pins {
+		samsung,pins = "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI05 */
+	hsi2c10_pins: hsi2c10-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI05_I2C */
+	hsi2c11_pins: hsi2c11-pins {
+		samsung,pins = "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI USI_PERIC0_USI00_SPI */
+	spi0_pins: spi0-pins {
+		samsung,pins = "gpp0-2", "gpp0-1", "gpp0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi0_cs_pin: spi0-cs-pin {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi0_cs_func_pin: spi0-cs-func-pin {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI01_SPI */
+	spi1_pins: spi1-pins {
+		samsung,pins = "gpp0-6", "gpp0-5", "gpp0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi1_cs_pin: spi1-cs-pin {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi1_cs_func_pin: spi1-cs-func-pin {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI02_SPI */
+	spi2_pins: spi2-pins {
+		samsung,pins = "gpp1-2", "gpp1-1", "gpp1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi2_cs_pin: spi2-cs-pin {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi2_cs_func_pin: spi2-cs-func-pin {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI03_SPI */
+	spi3_pins: spi3-pins {
+		samsung,pins = "gpp1-6", "gpp1-5", "gpp1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi3_cs_pin: spi3-cs-pin {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi3_cs_func_pin: spi3-cs-func-pin {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI04_SPI */
+	spi4_pins: spi4-pins {
+		samsung,pins = "gpp2-2", "gpp2-1", "gpp2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_cs_pin: spi4-cs-pin {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_cs_func_pin: spi4-cs-func-pin {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI05_SPI */
+	spi5_pins: spi5-pins {
+		samsung,pins = "gpp2-6", "gpp2-5", "gpp2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi5_cs_pin: spi5-cs-pin {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi5_cs_func_pin: spi5-cs-func-pin {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC0_USI00_UART */
+	uart0_pins: uart0-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart0_dual_pins: uart0-dual-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC0_USI01_UART */
+	uart1_pins: uart1-pins {
+		samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart1_dual_pins: uart1-dual-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC0_USI02_UART */
+	uart2_pins: uart2-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_dual_pins: uart2-dual-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC0_USI03_UART */
+	uart3_pins: uart3-pins {
+		samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_dual_pins: uart3-dual-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC0_USI04_UART */
+	uart4_pins: uart4-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_dual_pins: uart4-dual-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC0_USI05_UART */
+	uart5_pins: uart5-pins {
+		samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_dual_pins: uart5-dual-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpp3: gpp3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* PERIC1 USI06 */
+	hsi2c12_pins: hsi2c12-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI06_I2C */
+	hsi2c13_pins: hsi2c13-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI07 */
+	hsi2c14_pins: hsi2c14-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI07_I2C */
+	hsi2c15_pins: hsi2c15-pins {
+		samsung,pins = "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI08 */
+	hsi2c16_pins: hsi2c16-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI08_I2C */
+	hsi2c17_pins: hsi2c17-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI09 */
+	hsi2c18_pins: hsi2c18-pins {
+		samsung,pins = "gpp4-4", "gpp4-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI09_I2C */
+	hsi2c19_pins: hsi2c19-pins {
+		samsung,pins = "gpp4-6", "gpp4-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI10 */
+	hsi2c20_pins: hsi2c20-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI10_I2C */
+	hsi2c21_pins: hsi2c21-pins {
+		samsung,pins = "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI11 */
+	hsi2c22_pins: hsi2c22-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI11_I2C */
+	hsi2c23_pins: hsi2c23-pins {
+		samsung,pins = "gpp5-6", "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI06_SPI */
+	spi6_pins: spi6-pins {
+		samsung,pins = "gpp3-2", "gpp3-1", "gpp3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi6_cs_pin: spi6-cs-pin {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi6_cs_func_pin: spi6-cs-func-pin {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI07_SPI */
+	spi7_pins: spi7-pins {
+		samsung,pins = "gpp3-6", "gpp3-5", "gpp3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi7_cs_pin: spi7-cs-pin {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi7_cs_func_pin: spi7-cs-func-pin {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI08_SPI */
+	spi8_pins: spi8-pins {
+		samsung,pins = "gpp4-2", "gpp4-1", "gpp4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi8_cs_pin: spi8-cs-pin {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi8_cs_func_pin: spi8-cs-func-pin {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI09_SPI */
+	spi9_pins: spi9-pins {
+		samsung,pins = "gpp4-6", "gpp4-5", "gpp4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi9_cs_pin: spi9-cs-pin {
+		samsung,pins = "gpp4-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi9_cs_func_pin: spi9-cs-func-pin {
+		samsung,pins = "gpp4-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI10_SPI */
+	spi10_pins: spi10-pins {
+		samsung,pins = "gpp5-2", "gpp5-1", "gpp5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi10_cs_pin: spi10-cs-pin {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi10_cs_func_pin: spi10-cs-func-pin {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI11_SPI */
+	spi11_pins: spi11-pins {
+		samsung,pins = "gpp3-6", "gpp3-5", "gpp3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi11_cs_pin: spi11-cs-pin {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi11_cs_func_pin: spi11-cs-func-pin {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI_PERIC1_USI06_UART */
+	uart6_pins: uart6-pins {
+		samsung,pins = "gpp3-3", "gpp3-2", "gpp3-1", "gpp3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_dual_pins: uart6-dual-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC1_USI07_UART */
+	uart7_pins: uart7-pins {
+		samsung,pins = "gpp3-7", "gpp3-6", "gpp3-5", "gpp3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_dual_pins: uart7-dual-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC1_USI08_UART */
+	uart8_pins: uart8-pins {
+		samsung,pins = "gpp4-3", "gpp4-2", "gpp4-1", "gpp4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_dual_pins: uart8-dual-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC1_USI09_UART */
+	uart9_pins: uart9-pins {
+		samsung,pins = "gpp4-7", "gpp4-6", "gpp4-5", "gpp4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_dual_pins: uart9-dual-pins {
+		samsung,pins = "gpp4-4", "gpp4-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC1_USI10_UART */
+	uart10_pins: uart10-pins {
+		samsung,pins = "gpp5-3", "gpp5-2", "gpp5-1", "gpp5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_dual_pins: uart10-dual-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC1_USI11_UART */
+	uart11_pins: uart11-pins {
+		samsung,pins = "gpp5-7", "gpp5-6", "gpp5-5", "gpp5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_dual_pins: uart11-dual-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
new file mode 100644
index 000000000000..58ea392da5c3
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAuto v9 SoC device tree source
+ *
+ * Copyright (c) 2021 Samsung Electronics Co., Ltd.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynosautov9";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_aud;
+		pinctrl2 = &pinctrl_fsys0;
+		pinctrl3 = &pinctrl_fsys1;
+		pinctrl4 = &pinctrl_fsys2;
+		pinctrl5 = &pinctrl_peric0;
+		pinctrl6 = &pinctrl_peric1;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+				     <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@000000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@000100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@000200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@000300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x300>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x10000>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x10100>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x10200>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x10300>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+		cpu_suspend = <0xc4000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	fixed-rate-clocks {
+		xtcxo: clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+			clock-output-names = "oscclk";
+		};
+
+		/*
+		 * Keep the stub clock for serial driver, until proper clock
+		 * driver is implemented.
+		 */
+		uart_clock: uart-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <133250000>;
+			clock-output-names = "uart";
+		};
+
+		/*
+		 * Keep the stub clock for ufs driver, until proper clock
+		 * driver is implemented.
+		 */
+		ufs_core_clock: uart-core-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <166562500>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		gic: interrupt-controller@11001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x10101000 0x1000>,
+			      <0x10102000 0x2000>,
+			      <0x10104000 0x2000>,
+			      <0x10106000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		pinctrl_alive: pinctrl@10450000 {
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x10450000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pinctrl_aud: pinctrl@19c60000{
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x19c60000 0x1000>;
+		};
+
+		pinctrl_fsys0: pinctrl@17740000 {
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x17740000 0x1000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys1: pinctrl@17060000 {
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x17060000 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys2: pinctrl@17c30000 {
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x17c30000 0x1000>;
+			interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_peric0: pinctrl@10230000 {
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x10230000 0x1000>;
+			interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_peric1: pinctrl@10830000 {
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x10830000 0x1000>;
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmu_system_controller: system-controller@10460000 {
+			compatible = "samsung,exynos7-pmu", "syscon";
+			reg = <0x10460000 0x10000>;
+		};
+
+		syscon_fsys2: syscon@17c20000 {
+			compatible = "samsung,exynosautov9-sysreg", "syscon";
+			reg = <0x17c20000 0x1000>;
+		};
+
+		/* USI: UART */
+		serial_0: uart@103000000 {
+			compatible = "samsung,exynos850-uart";
+			reg = <0x10300000 0x100>;
+			interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_dual_pins>;
+			clocks = <&uart_clock>, <&uart_clock>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		ufs_0_phy: ufs0-phy@17e04000 {
+			compatible = "samsung,exynosautov9-ufs-phy";
+			reg = <0x17e04000 0xc00>;
+			reg-names = "phy-pma";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+			clocks = <&xtcxo>;
+			clock-names = "ref_clk";
+			status = "disabled";
+		};
+
+		ufs_0: ufs0@17e00000 {
+			compatible ="samsung,exynosautov9-ufs";
+
+			reg = <0x17e00000 0x100>,  /* 0: HCI standard */
+				<0x17e01100 0x410>,  /* 1: Vendor-specific */
+				<0x17e80000 0x8000>,  /* 2: UNIPRO */
+				<0x17dc0000 0x2200>;  /* 3: UFS protector */
+			reg-names = "hci", "vs_hci", "unipro", "ufsp";
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ufs_core_clock>,
+				<&ufs_core_clock>;
+			clock-names = "core_clk", "sclk_unipro_main";
+			freq-table-hz = <0 0>, <0 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&ufs_rst_n_pin &ufs_refclk_out_pin>;
+			phys = <&ufs_0_phy>;
+			phy-names = "ufs-phy";
+			samsung,sysreg = <&syscon_fsys2>;
+			samsung,ufs-shareability-reg-offset = <0x710>;
+			status = "disabled";
+		};
+	};
+};
+
+#include "exynosautov9-pinctrl.dtsi"
-- 
2.33.0

[PATCH v2 3/3] arm64: dts: exynos: add minimal support for exynosautov9 sadk board

[Chanho Park]

SADK(Samsung Automotive Development Kit) is the development kit to
evaluate Exynos Auto v9 SoC. It has 16GB LPDDR4 DRAM and two
256GB Samsung UFS. This patch enables only serial console and ufs0
device.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
---
 .../bindings/arm/samsung/samsung-boards.yaml  |  6 ++
 arch/arm64/boot/dts/exynos/Makefile           |  3 +-
 .../boot/dts/exynos/exynosautov9-sadk.dts     | 56 +++++++++++++++++++
 3 files changed, 64 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts

diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
index 0796f0c87727..ef6dc14be4b5 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
@@ -199,6 +199,12 @@ properties:
               - samsung,exynos7-espresso        # Samsung Exynos7 Espresso
           - const: samsung,exynos7
 
+      - description: Exynos Auto v9 based boards
+        items:
+          - enum:
+              - samsung,exynosautov9-sadk   # Samsung Exynos Auto v9 SADK
+          - const: samsung,exynosautov9
+
 required:
   - compatible
 
diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
index e0a2facde6a2..b41e86df0a84 100644
--- a/arch/arm64/boot/dts/exynos/Makefile
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -2,4 +2,5 @@
 dtb-$(CONFIG_ARCH_EXYNOS) += \
 	exynos5433-tm2.dtb	\
 	exynos5433-tm2e.dtb	\
-	exynos7-espresso.dtb
+	exynos7-espresso.dtb	\
+	exynosautov9-sadk.dtb
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
new file mode 100644
index 000000000000..ef46d7aa6e28
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung ExynosAutov9 SADK board device tree source
+ *
+ * Copyright (c) 2021 Samsung Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+#include "exynosautov9.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Samsung ExynosAuto v9 SADK board";
+	compatible = "samsung,exynosautov9-sadk", "samsung,exynosautov9";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x77000000>,
+		      <0x8 0x80000000 0x1 0x7ba00000>,
+		      <0xa 0x00000000 0x2 0x00000000>;
+	};
+
+	ufs_0_fixed_vcc_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "ufs-vcc";
+		gpio = <&gpq0 1 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&ufs_0_phy {
+	status = "okay";
+};
+
+&ufs_0 {
+	status = "okay";
+	vcc-supply = <&ufs_0_fixed_vcc_reg>;
+	vcc-fixed-regulator;
+};
-- 
2.33.0

Re: [PATCH v2 2/3] arm64: dts: exynos: add initial support for exynosautov9 SoC

[Krzysztof Kozlowski]

On 08/10/2021 11:14, Chanho Park wrote:
> Add minimal support for ExynosAuto v9 SoC[1].
> 
> - Enumarate all pinctrl nodes
> - UART with exynos850 compatible
> - UFS0 HCI + Phy
> 
> Like exynos850, this also uses fixed-rate clock nodes until clock driver
> has been supported. The clock nodes are initialized on bootloader stage
> thus we don't need to control them so far.
> 
> [1]: https://www.samsung.com/semiconductor/minisite/exynos/products/automotiveprocessor/exynos-auto-v9/
> 
> Signed-off-by: Chanho Park <chanho61.park@samsung.com>
> ---
>  .../devicetree/bindings/mfd/syscon.yaml       |    1 +
>  .../boot/dts/exynos/exynosautov9-pinctrl.dtsi | 1189 +++++++++++++++++
>  arch/arm64/boot/dts/exynos/exynosautov9.dtsi  |  301 +++++
>  3 files changed, 1491 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
>  create mode 100644 arch/arm64/boot/dts/exynos/exynosautov9.dtsi
> 
> diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
> index abe3fd817e0b..75dcbb741010 100644
> --- a/Documentation/devicetree/bindings/mfd/syscon.yaml
> +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
> @@ -55,6 +55,7 @@ properties:
>                - samsung,exynos4-sysreg
>                - samsung,exynos5-sysreg
>                - samsung,exynos5433-sysreg
> +              - samsung,exynosautov9-sysreg
>  
>            - const: syscon

This has to be a separate patch.

>  
> diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
> new file mode 100644
> index 000000000000..8489b9bea3c9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
> @@ -0,0 +1,1189 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Samsung's ExynosAutov9 SoC pin-mux and pin-config device tree source
> + *
> + * Copyright (c) 2021 Samsung Electronics Co., Ltd.
> + *
> + * Samsung's ExynosAutov9 SoC pin-mux and pin-config options are listed as
> + * device tree nodes in this file.
> + */
> +
> +#include <dt-bindings/pinctrl/samsung.h>
> +
> +&pinctrl_alive {
> +	gpa0: gpa0 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	gpa1: gpa1 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	dp0_hpd_pin: dp0-hpd-pin {

Keep same suffix everywhere, so "-pins", even if there is just one pin.
However no need for suffix in the label - schema does not care about
labels, so:

    dp0_hpd: dp0-hpd-pins {

> +		samsung,pins = "gpa1-0";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> +	};
> +
> +	dp1_hpd_pin: dp1-hpd-pin {
> +		samsung,pins = "gpa1-1";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> +	};
> +
> +	gpq0: gpq0 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	speedy0_pin: speedy0-pin {
> +		samsung,pins = "gpq0-0";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> +	};
> +
> +	speedy1_pin: speedy1-pin {
> +		samsung,pins = "gpa0-3";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> +	};
> +};
> +
> +&pinctrl_aud {
> +	gpb0: gpb0 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpb1: gpb1 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpb2: gpb2 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpb3: gpb3 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	aud_codec_mclk_pin: aud-codec-mclk-pin {
> +		samsung,pins = "gpb0-4";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> +	};
> +
> +	aud_codec_mclk_idle_pin: aud-codec-mclk-idle-pin {
> +		samsung,pins = "gpb0-4";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> +	};
> +
> +	aud_i2s0_pins: aud-i2s0-pins {
> +		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> +	};
> +
> +	aud_i2s0_idle_pins_pins: aud-i2s0-idle-pins-pins {

Duplicates pins pins.


Best regards,
Krzysztof

Re: [PATCH v2 3/3] arm64: dts: exynos: add minimal support for exynosautov9 sadk board

[Krzysztof Kozlowski]

On 08/10/2021 11:14, Chanho Park wrote:
> SADK(Samsung Automotive Development Kit) is the development kit to
> evaluate Exynos Auto v9 SoC. It has 16GB LPDDR4 DRAM and two
> 256GB Samsung UFS. This patch enables only serial console and ufs0
> device.
> 
> Signed-off-by: Chanho Park <chanho61.park@samsung.com>
> ---
>  .../bindings/arm/samsung/samsung-boards.yaml  |  6 ++
>  arch/arm64/boot/dts/exynos/Makefile           |  3 +-
>  .../boot/dts/exynos/exynosautov9-sadk.dts     | 56 +++++++++++++++++++
>  3 files changed, 64 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
> 
> diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
> index 0796f0c87727..ef6dc14be4b5 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
> +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
> @@ -199,6 +199,12 @@ properties:
>                - samsung,exynos7-espresso        # Samsung Exynos7 Espresso
>            - const: samsung,exynos7
>  
> +      - description: Exynos Auto v9 based boards
> +        items:
> +          - enum:
> +              - samsung,exynosautov9-sadk   # Samsung Exynos Auto v9 SADK
> +          - const: samsung,exynosautov9
> +
>  required:
>    - compatible
>  

This looks good, but depends on fixes in patch #2.


Best regards,
Krzysztof

Re: (subset) [PATCH v2 1/3] pinctrl: samsung: support ExynosAutov9 SoC pinctrl

[Krzysztof Kozlowski]

On Fri, 8 Oct 2021 18:14:41 +0900, Chanho Park wrote:
> Add pinctrl data for ExynosAuto v9 SoC.
> 
> - GPA0, GPA1: 10, External wake up interrupt
> - GPQ0: 2, XbootLDO, Speedy PMIC I/F
> - GPB0, GPB1, GPB2, GPB3: 29, I2S 7 CH
> - GPF0, GPF1, GPF2, GPF3,GPF4, GPF5, GPF6, GPF8: 52, FSYS
> - GPG0, GPG1, GPG2, GPG3: 25, GPIO x 24, SMPL_INT
> - GPP0, GPP1, GPP2, GPP3, GPP4, GPP5: 48, USI 12 CH
> 
> [...]

Applied, thanks!

[1/3] pinctrl: samsung: support ExynosAutov9 SoC pinctrl
      commit: f9d8de699ac4a059e30cf0e84e7027f1058b9163

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>