[PATCH 4.14 00/10] 4.14.250-rc1 review

[PATCH 4.14 00/10] 4.14.250-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.250 release.
There are 10 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun, 10 Oct 2021 11:27:07 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.250-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.250-rc1

Davidlohr Bueso <dave@stgolabs.net>
    lib/timerqueue: Rely on rbtree semantics for next timer

Kate Hsuan <hpa@redhat.com>
    libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD.

Wen Xiong <wenxiong@linux.ibm.com>
    scsi: ses: Retry failed Send/Receive Diagnostic commands

Yang Yingliang <yangyingliang@huawei.com>
    usb: dwc2: check return value after calling platform_get_resource()

Faizel K B <faizel.kb@dicortech.com>
    usb: testusb: Fix for showing the connection speed

Ming Lei <ming.lei@redhat.com>
    scsi: sd: Free scsi_disk device via put_device()

Dan Carpenter <dan.carpenter@oracle.com>
    ext2: fix sleeping in atomic bugs on error

Linus Torvalds <torvalds@linux-foundation.org>
    sparc64: fix pci_iounmap() when CONFIG_PCI is not set

Jan Beulich <jbeulich@suse.com>
    xen-netback: correct success/error reporting for the SKB-with-fraglist case

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: mdio: introduce a shutdown method to mdio device drivers


-------------

Diffstat:

 Makefile                          |  4 ++--
 arch/sparc/lib/iomap.c            |  2 ++
 drivers/ata/libata-core.c         | 34 ++++++++++++++++++++++++++++++++--
 drivers/net/phy/mdio_device.c     | 11 +++++++++++
 drivers/net/xen-netback/netback.c |  2 +-
 drivers/scsi/sd.c                 |  9 +++++----
 drivers/scsi/ses.c                | 22 ++++++++++++++++++----
 drivers/usb/dwc2/hcd.c            |  4 ++++
 fs/ext2/balloc.c                  | 14 ++++++--------
 include/linux/libata.h            |  1 +
 include/linux/mdio.h              |  3 +++
 include/linux/timerqueue.h        | 13 ++++++-------
 lib/timerqueue.c                  | 30 ++++++++++++------------------
 tools/usb/testusb.c               | 14 ++++++++------
 14 files changed, 111 insertions(+), 52 deletions(-)

[PATCH 4.14 01/10] net: mdio: introduce a shutdown method to mdio device drivers

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit cf9579976f724ad517cc15b7caadea728c7e245c ]

MDIO-attached devices might have interrupts and other things that might
need quiesced when we kexec into a new kernel. Things are even more
creepy when those interrupt lines are shared, and in that case it is
absolutely mandatory to disable all interrupt sources.

Moreover, MDIO devices might be DSA switches, and DSA needs its own
shutdown method to unlink from the DSA master, which is a new
requirement that appeared after commit 2f1e8ea726e9 ("net: dsa: link
interfaces with the DSA master to get rid of lockdep warnings").

So introduce a ->shutdown method in the MDIO device driver structure.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/mdio_device.c | 11 +++++++++++
 include/linux/mdio.h          |  3 +++
 2 files changed, 14 insertions(+)

diff --git a/drivers/net/phy/mdio_device.c b/drivers/net/phy/mdio_device.c
index e24f28924af8..5265180251ea 100644
--- a/drivers/net/phy/mdio_device.c
+++ b/drivers/net/phy/mdio_device.c
@@ -146,6 +146,16 @@ static int mdio_remove(struct device *dev)
 	return 0;
 }
 
+static void mdio_shutdown(struct device *dev)
+{
+	struct mdio_device *mdiodev = to_mdio_device(dev);
+	struct device_driver *drv = mdiodev->dev.driver;
+	struct mdio_driver *mdiodrv = to_mdio_driver(drv);
+
+	if (mdiodrv->shutdown)
+		mdiodrv->shutdown(mdiodev);
+}
+
 /**
  * mdio_driver_register - register an mdio_driver with the MDIO layer
  * @new_driver: new mdio_driver to register
@@ -160,6 +170,7 @@ int mdio_driver_register(struct mdio_driver *drv)
 	mdiodrv->driver.bus = &mdio_bus_type;
 	mdiodrv->driver.probe = mdio_probe;
 	mdiodrv->driver.remove = mdio_remove;
+	mdiodrv->driver.shutdown = mdio_shutdown;
 
 	retval = driver_register(&mdiodrv->driver);
 	if (retval) {
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index ca08ab16ecdc..780c4859ce2d 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -63,6 +63,9 @@ struct mdio_driver {
 
 	/* Clears up any memory if needed */
 	void (*remove)(struct mdio_device *mdiodev);
+
+	/* Quiesces the device on system shutdown, turns off interrupts etc */
+	void (*shutdown)(struct mdio_device *mdiodev);
 };
 #define to_mdio_driver(d)						\
 	container_of(to_mdio_common_driver(d), struct mdio_driver, mdiodrv)
-- 
2.33.0

[PATCH 4.14 02/10] xen-netback: correct success/error reporting for the SKB-with-fraglist case

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

[ Upstream commit 3ede7f84c7c21f93c5eac611d60eba3f2c765e0f ]

When re-entering the main loop of xenvif_tx_check_gop() a 2nd time, the
special considerations for the head of the SKB no longer apply. Don't
mistakenly report ERROR to the frontend for the first entry in the list,
even if - from all I can tell - this shouldn't matter much as the overall
transmit will need to be considered failed anyway.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/xen-netback/netback.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index ad555a9a3eca..e1d6dbb4b770 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -492,7 +492,7 @@ check_frags:
 				 * the header's copy failed, and they are
 				 * sharing a slot, send an error
 				 */
-				if (i == 0 && sharedslot)
+				if (i == 0 && !first_shinfo && sharedslot)
 					xenvif_idx_release(queue, pending_idx,
 							   XEN_NETIF_RSP_ERROR);
 				else
-- 
2.33.0

[PATCH 4.14 03/10] sparc64: fix pci_iounmap() when CONFIG_PCI is not set

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit d8b1e10a2b8efaf71d151aa756052fbf2f3b6d57 ]

Guenter reported [1] that the pci_iounmap() changes remain problematic,
with sparc64 allnoconfig and tinyconfig still not building due to the
header file changes and confusion with the arch-specific pci_iounmap()
implementation.

I'm pretty convinced that sparc should just use GENERIC_IOMAP instead of
doing its own thing, since it turns out that the sparc64 version of
pci_iounmap() is somewhat buggy (see [2]).  But in the meantime, this
just fixes the build by avoiding the trivial re-definition of the empty
case.

Link: https://lore.kernel.org/lkml/20210920134424.GA346531@roeck-us.net/ [1]
Link: https://lore.kernel.org/lkml/CAHk-=wgheheFx9myQyy5osh79BAazvmvYURAtub2gQtMvLrhqQ@mail.gmail.com/ [2]
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/lib/iomap.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/sparc/lib/iomap.c b/arch/sparc/lib/iomap.c
index c9da9f139694..f3a8cd491ce0 100644
--- a/arch/sparc/lib/iomap.c
+++ b/arch/sparc/lib/iomap.c
@@ -19,8 +19,10 @@ void ioport_unmap(void __iomem *addr)
 EXPORT_SYMBOL(ioport_map);
 EXPORT_SYMBOL(ioport_unmap);
 
+#ifdef CONFIG_PCI
 void pci_iounmap(struct pci_dev *dev, void __iomem * addr)
 {
 	/* nothing to do */
 }
 EXPORT_SYMBOL(pci_iounmap);
+#endif
-- 
2.33.0

[PATCH 4.14 04/10] ext2: fix sleeping in atomic bugs on error

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 372d1f3e1bfede719864d0d1fbf3146b1e638c88 ]

The ext2_error() function syncs the filesystem so it sleeps.  The caller
is holding a spinlock so it's not allowed to sleep.

   ext2_statfs() <- disables preempt
   -> ext2_count_free_blocks()
      -> ext2_get_group_desc()

Fix this by using WARN() to print an error message and a stack trace
instead of using ext2_error().

Link: https://lore.kernel.org/r/20210921203233.GA16529@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext2/balloc.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/fs/ext2/balloc.c b/fs/ext2/balloc.c
index e1b3724bebf2..ccd5a7016c19 100644
--- a/fs/ext2/balloc.c
+++ b/fs/ext2/balloc.c
@@ -48,10 +48,9 @@ struct ext2_group_desc * ext2_get_group_desc(struct super_block * sb,
 	struct ext2_sb_info *sbi = EXT2_SB(sb);
 
 	if (block_group >= sbi->s_groups_count) {
-		ext2_error (sb, "ext2_get_group_desc",
-			    "block_group >= groups_count - "
-			    "block_group = %d, groups_count = %lu",
-			    block_group, sbi->s_groups_count);
+		WARN(1, "block_group >= groups_count - "
+		     "block_group = %d, groups_count = %lu",
+		     block_group, sbi->s_groups_count);
 
 		return NULL;
 	}
@@ -59,10 +58,9 @@ struct ext2_group_desc * ext2_get_group_desc(struct super_block * sb,
 	group_desc = block_group >> EXT2_DESC_PER_BLOCK_BITS(sb);
 	offset = block_group & (EXT2_DESC_PER_BLOCK(sb) - 1);
 	if (!sbi->s_group_desc[group_desc]) {
-		ext2_error (sb, "ext2_get_group_desc",
-			    "Group descriptor not loaded - "
-			    "block_group = %d, group_desc = %lu, desc = %lu",
-			     block_group, group_desc, offset);
+		WARN(1, "Group descriptor not loaded - "
+		     "block_group = %d, group_desc = %lu, desc = %lu",
+		      block_group, group_desc, offset);
 		return NULL;
 	}
 
-- 
2.33.0

[PATCH 4.14 05/10] scsi: sd: Free scsi_disk device via put_device()

[Greg Kroah-Hartman]

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit 265dfe8ebbabae7959060bd1c3f75c2473b697ed ]

After a device is initialized via device_initialize() it should be freed
via put_device(). sd_probe() currently gets this wrong, fix it up.

Link: https://lore.kernel.org/r/20210906090112.531442-1-ming.lei@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/sd.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 49d0720a0b7d..e490cbdaad9b 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -3454,15 +3454,16 @@ static int sd_probe(struct device *dev)
 	}
 
 	device_initialize(&sdkp->dev);
-	sdkp->dev.parent = dev;
+	sdkp->dev.parent = get_device(dev);
 	sdkp->dev.class = &sd_disk_class;
 	dev_set_name(&sdkp->dev, "%s", dev_name(dev));
 
 	error = device_add(&sdkp->dev);
-	if (error)
-		goto out_free_index;
+	if (error) {
+		put_device(&sdkp->dev);
+		goto out;
+	}
 
-	get_device(dev);
 	dev_set_drvdata(dev, sdkp);
 
 	get_device(&sdkp->dev);	/* prevent release before async_schedule */
-- 
2.33.0

[PATCH 4.14 06/10] usb: testusb: Fix for showing the connection speed

[Greg Kroah-Hartman]

From: Faizel K B <faizel.kb@dicortech.com>

[ Upstream commit f81c08f897adafd2ed43f86f00207ff929f0b2eb ]

testusb' application which uses 'usbtest' driver reports 'unknown speed'
from the function 'find_testdev'. The variable 'entry->speed' was not
updated from  the application. The IOCTL mentioned in the FIXME comment can
only report whether the connection is low speed or not. Speed is read using
the IOCTL USBDEVFS_GET_SPEED which reports the proper speed grade.  The
call is implemented in the function 'handle_testdev' where the file
descriptor was availble locally. Sample output is given below where 'high
speed' is printed as the connected speed.

sudo ./testusb -a
high speed      /dev/bus/usb/001/011    0
/dev/bus/usb/001/011 test 0,    0.000015 secs
/dev/bus/usb/001/011 test 1,    0.194208 secs
/dev/bus/usb/001/011 test 2,    0.077289 secs
/dev/bus/usb/001/011 test 3,    0.170604 secs
/dev/bus/usb/001/011 test 4,    0.108335 secs
/dev/bus/usb/001/011 test 5,    2.788076 secs
/dev/bus/usb/001/011 test 6,    2.594610 secs
/dev/bus/usb/001/011 test 7,    2.905459 secs
/dev/bus/usb/001/011 test 8,    2.795193 secs
/dev/bus/usb/001/011 test 9,    8.372651 secs
/dev/bus/usb/001/011 test 10,    6.919731 secs
/dev/bus/usb/001/011 test 11,   16.372687 secs
/dev/bus/usb/001/011 test 12,   16.375233 secs
/dev/bus/usb/001/011 test 13,    2.977457 secs
/dev/bus/usb/001/011 test 14 --> 22 (Invalid argument)
/dev/bus/usb/001/011 test 17,    0.148826 secs
/dev/bus/usb/001/011 test 18,    0.068718 secs
/dev/bus/usb/001/011 test 19,    0.125992 secs
/dev/bus/usb/001/011 test 20,    0.127477 secs
/dev/bus/usb/001/011 test 21 --> 22 (Invalid argument)
/dev/bus/usb/001/011 test 24,    4.133763 secs
/dev/bus/usb/001/011 test 27,    2.140066 secs
/dev/bus/usb/001/011 test 28,    2.120713 secs
/dev/bus/usb/001/011 test 29,    0.507762 secs

Signed-off-by: Faizel K B <faizel.kb@dicortech.com>
Link: https://lore.kernel.org/r/20210902114444.15106-1-faizel.kb@dicortech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/usb/testusb.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/tools/usb/testusb.c b/tools/usb/testusb.c
index 2d89b5f686b1..791aadef2d59 100644
--- a/tools/usb/testusb.c
+++ b/tools/usb/testusb.c
@@ -278,12 +278,6 @@ nomem:
 	}
 
 	entry->ifnum = ifnum;
-
-	/* FIXME update USBDEVFS_CONNECTINFO so it tells about high speed etc */
-
-	fprintf(stderr, "%s speed\t%s\t%u\n",
-		speed(entry->speed), entry->name, entry->ifnum);
-
 	entry->next = testdevs;
 	testdevs = entry;
 	return 0;
@@ -312,6 +306,14 @@ static void *handle_testdev (void *arg)
 		return 0;
 	}
 
+	status  =  ioctl(fd, USBDEVFS_GET_SPEED, NULL);
+	if (status < 0)
+		fprintf(stderr, "USBDEVFS_GET_SPEED failed %d\n", status);
+	else
+		dev->speed = status;
+	fprintf(stderr, "%s speed\t%s\t%u\n",
+			speed(dev->speed), dev->name, dev->ifnum);
+
 restart:
 	for (i = 0; i < TEST_CASES; i++) {
 		if (dev->test != -1 && dev->test != i)
-- 
2.33.0

[PATCH 4.14 07/10] usb: dwc2: check return value after calling platform_get_resource()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 856e6e8e0f9300befa87dde09edb578555c99a82 ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210831084236.1359677-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc2/hcd.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index ef7f3b013fcb..ba7528916da4 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -5229,6 +5229,10 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg)
 	hcd->has_tt = 1;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		retval = -EINVAL;
+		goto error1;
+	}
 	hcd->rsrc_start = res->start;
 	hcd->rsrc_len = resource_size(res);
 
-- 
2.33.0

[PATCH 4.14 08/10] scsi: ses: Retry failed Send/Receive Diagnostic commands

[Greg Kroah-Hartman]

From: Wen Xiong <wenxiong@linux.ibm.com>

[ Upstream commit fbdac19e642899455b4e64c63aafe2325df7aafa ]

Setting SCSI logging level with error=3, we saw some errors from enclosues:

[108017.360833] ses 0:0:9:0: tag#641 Done: NEEDS_RETRY Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[108017.360838] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00
[108017.427778] ses 0:0:9:0: Power-on or device reset occurred
[108017.427784] ses 0:0:9:0: tag#641 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[108017.427788] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00
[108017.427791] ses 0:0:9:0: tag#641 Sense Key : Unit Attention [current]
[108017.427793] ses 0:0:9:0: tag#641 Add. Sense: Bus device reset function occurred
[108017.427801] ses 0:0:9:0: Failed to get diagnostic page 0x1
[108017.427804] ses 0:0:9:0: Failed to bind enclosure -19
[108017.427895] ses 0:0:10:0: Attached Enclosure device
[108017.427942] ses 0:0:10:0: Attached scsi generic sg18 type 13

Retry if the Send/Receive Diagnostic commands complete with a transient
error status (NOT_READY or UNIT_ATTENTION with ASC 0x29).

Link: https://lore.kernel.org/r/1631849061-10210-2-git-send-email-wenxiong@linux.ibm.com
Reviewed-by: Brian King <brking@linux.ibm.com>
Reviewed-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ses.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 62f04c0511cf..4b993607887c 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -103,9 +103,16 @@ static int ses_recv_diag(struct scsi_device *sdev, int page_code,
 		0
 	};
 	unsigned char recv_page_code;
+	unsigned int retries = SES_RETRIES;
+	struct scsi_sense_hdr sshdr;
+
+	do {
+		ret = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen,
+				       &sshdr, SES_TIMEOUT, 1, NULL);
+	} while (ret > 0 && --retries && scsi_sense_valid(&sshdr) &&
+		 (sshdr.sense_key == NOT_READY ||
+		  (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29)));
 
-	ret =  scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen,
-				NULL, SES_TIMEOUT, SES_RETRIES, NULL);
 	if (unlikely(ret))
 		return ret;
 
@@ -137,9 +144,16 @@ static int ses_send_diag(struct scsi_device *sdev, int page_code,
 		bufflen & 0xff,
 		0
 	};
+	struct scsi_sense_hdr sshdr;
+	unsigned int retries = SES_RETRIES;
+
+	do {
+		result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen,
+					  &sshdr, SES_TIMEOUT, 1, NULL);
+	} while (result > 0 && --retries && scsi_sense_valid(&sshdr) &&
+		 (sshdr.sense_key == NOT_READY ||
+		  (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29)));
 
-	result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen,
-				  NULL, SES_TIMEOUT, SES_RETRIES, NULL);
 	if (result)
 		sdev_printk(KERN_ERR, sdev, "SEND DIAGNOSTIC result: %8x\n",
 			    result);
-- 
2.33.0

[PATCH 4.14 09/10] libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD.

[Greg Kroah-Hartman]

From: Kate Hsuan <hpa@redhat.com>

commit 7a8526a5cd51cf5f070310c6c37dd7293334ac49 upstream.

Many users are reporting that the Samsung 860 and 870 SSD are having
various issues when combined with AMD/ATI (vendor ID 0x1002)  SATA
controllers and only completely disabling NCQ helps to avoid these
issues.

Always disabling NCQ for Samsung 860/870 SSDs regardless of the host
SATA adapter vendor will cause I/O performance degradation with well
behaved adapters. To limit the performance impact to ATI adapters,
introduce the ATA_HORKAGE_NO_NCQ_ON_ATI flag to force disable NCQ
only for these adapters.

Also, two libata.force parameters (noncqati and ncqati) are introduced
to disable and enable the NCQ for the system which equipped with ATI
SATA adapter and Samsung 860 and 870 SSDs. The user can determine NCQ
function to be enabled or disabled according to the demand.

After verifying the chipset from the user reports, the issue appears
on AMD/ATI SB7x0/SB8x0/SB9x0 SATA Controllers and does not appear on
recent AMD SATA adapters. The vendor ID of ATI should be 0x1002.
Therefore, ATA_HORKAGE_NO_NCQ_ON_AMD was modified to
ATA_HORKAGE_NO_NCQ_ON_ATI.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201693
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210903094411.58749-1-hpa@redhat.com
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Krzysztof Olędzki <ole@ans.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/ata/libata-core.c |   34 ++++++++++++++++++++++++++++++++--
 include/linux/libata.h    |    1 +
 2 files changed, 33 insertions(+), 2 deletions(-)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2276,6 +2276,25 @@ static void ata_dev_config_ncq_prio(stru
 
 }
 
+static bool ata_dev_check_adapter(struct ata_device *dev,
+				  unsigned short vendor_id)
+{
+	struct pci_dev *pcidev = NULL;
+	struct device *parent_dev = NULL;
+
+	for (parent_dev = dev->tdev.parent; parent_dev != NULL;
+	     parent_dev = parent_dev->parent) {
+		if (dev_is_pci(parent_dev)) {
+			pcidev = to_pci_dev(parent_dev);
+			if (pcidev->vendor == vendor_id)
+				return true;
+			break;
+		}
+	}
+
+	return false;
+}
+
 static int ata_dev_config_ncq(struct ata_device *dev,
 			       char *desc, size_t desc_sz)
 {
@@ -2292,6 +2311,13 @@ static int ata_dev_config_ncq(struct ata
 		snprintf(desc, desc_sz, "NCQ (not used)");
 		return 0;
 	}
+
+	if (dev->horkage & ATA_HORKAGE_NO_NCQ_ON_ATI &&
+	    ata_dev_check_adapter(dev, PCI_VENDOR_ID_ATI)) {
+		snprintf(desc, desc_sz, "NCQ (not used)");
+		return 0;
+	}
+
 	if (ap->flags & ATA_FLAG_NCQ) {
 		hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE - 1);
 		dev->flags |= ATA_DFLAG_NCQ;
@@ -4565,9 +4591,11 @@ static const struct ata_blacklist_entry
 	{ "Samsung SSD 850*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Samsung SSD 860*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
-						ATA_HORKAGE_ZERO_AFTER_TRIM, },
+						ATA_HORKAGE_ZERO_AFTER_TRIM |
+						ATA_HORKAGE_NO_NCQ_ON_ATI, },
 	{ "Samsung SSD 870*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
-						ATA_HORKAGE_ZERO_AFTER_TRIM, },
+						ATA_HORKAGE_ZERO_AFTER_TRIM |
+						ATA_HORKAGE_NO_NCQ_ON_ATI, },
 	{ "FCCT*M500*",			NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 
@@ -6860,6 +6888,8 @@ static int __init ata_parse_force_one(ch
 		{ "ncq",	.horkage_off	= ATA_HORKAGE_NONCQ },
 		{ "noncqtrim",	.horkage_on	= ATA_HORKAGE_NO_NCQ_TRIM },
 		{ "ncqtrim",	.horkage_off	= ATA_HORKAGE_NO_NCQ_TRIM },
+		{ "noncqati",	.horkage_on	= ATA_HORKAGE_NO_NCQ_ON_ATI },
+		{ "ncqati",	.horkage_off	= ATA_HORKAGE_NO_NCQ_ON_ATI },
 		{ "dump_id",	.horkage_on	= ATA_HORKAGE_DUMP_ID },
 		{ "pio0",	.xfer_mask	= 1 << (ATA_SHIFT_PIO + 0) },
 		{ "pio1",	.xfer_mask	= 1 << (ATA_SHIFT_PIO + 1) },
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -441,6 +441,7 @@ enum {
 	ATA_HORKAGE_NOTRIM	= (1 << 24),	/* don't use TRIM */
 	ATA_HORKAGE_MAX_SEC_1024 = (1 << 25),	/* Limit max sects to 1024 */
 	ATA_HORKAGE_MAX_TRIM_128M = (1 << 26),	/* Limit max trim size to 128M */
+	ATA_HORKAGE_NO_NCQ_ON_ATI = (1 << 27),	/* Disable NCQ on ATI chipset */
 
 	 /* DMA mask for user DMA control: User visible values; DO NOT
 	    renumber */

[PATCH 4.14 10/10] lib/timerqueue: Rely on rbtree semantics for next timer

[Greg Kroah-Hartman]

From: Davidlohr Bueso <dave@stgolabs.net>

commit 511885d7061eda3eb1faf3f57dcc936ff75863f1 upstream.

Simplify the timerqueue code by using cached rbtrees and rely on the tree
leftmost node semantics to get the timer with earliest expiration time.
This is a drop in conversion, and therefore semantics remain untouched.

The runtime overhead of cached rbtrees is be pretty much the same as the
current head->next method, noting that when removing the leftmost node,
a common operation for the timerqueue, the rb_next(leftmost) is O(1) as
well, so the next timer will either be the right node or its parent.
Therefore no extra pointer chasing. Finally, the size of the struct
timerqueue_head remains the same.

Passes several hours of rcutorture.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190724152323.bojciei3muvfxalm@linux-r8p5
Reference: CVE-2021-20317
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/timerqueue.h |   13 ++++++-------
 lib/timerqueue.c           |   30 ++++++++++++------------------
 2 files changed, 18 insertions(+), 25 deletions(-)

--- a/include/linux/timerqueue.h
+++ b/include/linux/timerqueue.h
@@ -12,8 +12,7 @@ struct timerqueue_node {
 };
 
 struct timerqueue_head {
-	struct rb_root head;
-	struct timerqueue_node *next;
+	struct rb_root_cached rb_root;
 };
 
 
@@ -29,13 +28,14 @@ extern struct timerqueue_node *timerqueu
  *
  * @head: head of timerqueue
  *
- * Returns a pointer to the timer node that has the
- * earliest expiration time.
+ * Returns a pointer to the timer node that has the earliest expiration time.
  */
 static inline
 struct timerqueue_node *timerqueue_getnext(struct timerqueue_head *head)
 {
-	return head->next;
+	struct rb_node *leftmost = rb_first_cached(&head->rb_root);
+
+	return rb_entry(leftmost, struct timerqueue_node, node);
 }
 
 static inline void timerqueue_init(struct timerqueue_node *node)
@@ -45,7 +45,6 @@ static inline void timerqueue_init(struc
 
 static inline void timerqueue_init_head(struct timerqueue_head *head)
 {
-	head->head = RB_ROOT;
-	head->next = NULL;
+	head->rb_root = RB_ROOT_CACHED;
 }
 #endif /* _LINUX_TIMERQUEUE_H */
--- a/lib/timerqueue.c
+++ b/lib/timerqueue.c
@@ -38,9 +38,10 @@
  */
 bool timerqueue_add(struct timerqueue_head *head, struct timerqueue_node *node)
 {
-	struct rb_node **p = &head->head.rb_node;
+	struct rb_node **p = &head->rb_root.rb_root.rb_node;
 	struct rb_node *parent = NULL;
-	struct timerqueue_node  *ptr;
+	struct timerqueue_node *ptr;
+	bool leftmost = true;
 
 	/* Make sure we don't add nodes that are already added */
 	WARN_ON_ONCE(!RB_EMPTY_NODE(&node->node));
@@ -48,19 +49,17 @@ bool timerqueue_add(struct timerqueue_he
 	while (*p) {
 		parent = *p;
 		ptr = rb_entry(parent, struct timerqueue_node, node);
-		if (node->expires < ptr->expires)
+		if (node->expires < ptr->expires) {
 			p = &(*p)->rb_left;
-		else
+		} else {
 			p = &(*p)->rb_right;
+			leftmost = false;
+		}
 	}
 	rb_link_node(&node->node, parent, p);
-	rb_insert_color(&node->node, &head->head);
+	rb_insert_color_cached(&node->node, &head->rb_root, leftmost);
 
-	if (!head->next || node->expires < head->next->expires) {
-		head->next = node;
-		return true;
-	}
-	return false;
+	return leftmost;
 }
 EXPORT_SYMBOL_GPL(timerqueue_add);
 
@@ -76,15 +75,10 @@ bool timerqueue_del(struct timerqueue_he
 {
 	WARN_ON_ONCE(RB_EMPTY_NODE(&node->node));
 
-	/* update next pointer */
-	if (head->next == node) {
-		struct rb_node *rbn = rb_next(&node->node);
-
-		head->next = rb_entry_safe(rbn, struct timerqueue_node, node);
-	}
-	rb_erase(&node->node, &head->head);
+	rb_erase_cached(&node->node, &head->rb_root);
 	RB_CLEAR_NODE(&node->node);
-	return head->next != NULL;
+
+	return !RB_EMPTY_ROOT(&head->rb_root.rb_root);
 }
 EXPORT_SYMBOL_GPL(timerqueue_del);
 

Re: [PATCH 4.14 00/10] 4.14.250-rc1 review

[Jon Hunter]

On Fri, 08 Oct 2021 13:27:41 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.250 release.
> There are 10 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 10 Oct 2021 11:27:07 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.250-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.14:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version:	4.14.250-rc1-g7d769cc629ad
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 4.14 00/10] 4.14.250-rc1 review

[Guenter Roeck]

On Fri, Oct 08, 2021 at 01:27:41PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.250 release.
> There are 10 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 10 Oct 2021 11:27:07 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 168 pass: 168 fail: 0
Qemu test results:
	total: 421 pass: 421 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.14 00/10] 4.14.250-rc1 review

[Naresh Kamboju]

On Fri, 8 Oct 2021 at 16:59, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.14.250 release.
> There are 10 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 10 Oct 2021 11:27:07 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.250-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.14.250-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.14.y
* git commit: 7d769cc629ad98f5af7d44e0b70717708a7b323e
* git describe: v4.14.249-11-g7d769cc629ad
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.249-11-g7d769cc629ad

## No regressions (compared to v4.14.249-11-ge016eae29d2d)

## No fixes (compared to v4.14.249-11-ge016eae29d2d)

## Test result summary
total: 75800, pass: 61082, fail: 609, skip: 12086, xfail: 2023

## Build Summary
* arm: 258 total, 258 passed, 0 failed
* arm64: 68 total, 68 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 35 total, 35 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 48 total, 48 passed, 0 failed
* sparc: 24 total, 24 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 36 total, 36 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org