All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandre Ghiti <alexandre.ghiti@canonical.com>
To: Michael Ellerman <mpe@ellerman.id.au>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
	linux-riscv@lists.infradead.org
Cc: Alexandre Ghiti <alex@ghiti.fr>
Subject: [PATCH v7 1/3] riscv: Introduce CONFIG_RELOCATABLE
Date: Sat,  9 Oct 2021 19:12:57 +0200	[thread overview]
Message-ID: <20211009171259.2515351-2-alexandre.ghiti@canonical.com> (raw)
In-Reply-To: <20211009171259.2515351-1-alexandre.ghiti@canonical.com>

From: Alexandre Ghiti <alex@ghiti.fr>

This config allows to compile 64b kernel as PIE and to relocate it at
any virtual address at runtime: this paves the way to KASLR.
Runtime relocation is possible since relocation metadata are embedded into
the kernel.

Note that relocating at runtime introduces an overhead even if the
kernel is loaded at the same address it was linked at and that the compiler
options are those used in arm64 which uses the same RELA relocation
format.

Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
---
 arch/riscv/Kconfig              | 12 ++++++++
 arch/riscv/Makefile             |  7 +++--
 arch/riscv/kernel/vmlinux.lds.S |  6 ++++
 arch/riscv/mm/Makefile          |  4 +++
 arch/riscv/mm/init.c            | 54 ++++++++++++++++++++++++++++++++-
 5 files changed, 80 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index ea16fa2dd768..043ba92559fa 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -213,6 +213,18 @@ config PGTABLE_LEVELS
 config LOCKDEP_SUPPORT
 	def_bool y
 
+config RELOCATABLE
+	bool
+	depends on MMU && 64BIT && !XIP_KERNEL
+	help
+          This builds a kernel as a Position Independent Executable (PIE),
+          which retains all relocation metadata required to relocate the
+          kernel binary at runtime to a different virtual address than the
+          address it was linked at.
+          Since RISCV uses the RELA relocation format, this requires a
+          relocation pass at runtime even if the kernel is loaded at the
+          same address it was linked at.
+
 source "arch/riscv/Kconfig.socs"
 source "arch/riscv/Kconfig.erratas"
 
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 0eb4568fbd29..2f509915f246 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -9,9 +9,12 @@
 #
 
 OBJCOPYFLAGS    := -O binary
-LDFLAGS_vmlinux :=
+ifeq ($(CONFIG_RELOCATABLE),y)
+	LDFLAGS_vmlinux += -shared -Bsymbolic -z notext -z norelro
+	KBUILD_CFLAGS += -fPIE
+endif
 ifeq ($(CONFIG_DYNAMIC_FTRACE),y)
-	LDFLAGS_vmlinux := --no-relax
+	LDFLAGS_vmlinux += --no-relax
 	KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
 	CC_FLAGS_FTRACE := -fpatchable-function-entry=8
 endif
diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
index 5104f3a871e3..862a8c09723c 100644
--- a/arch/riscv/kernel/vmlinux.lds.S
+++ b/arch/riscv/kernel/vmlinux.lds.S
@@ -133,6 +133,12 @@ SECTIONS
 
 	BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
 
+	.rela.dyn : ALIGN(8) {
+		__rela_dyn_start = .;
+		*(.rela .rela*)
+		__rela_dyn_end = .;
+	}
+
 #ifdef CONFIG_EFI
 	. = ALIGN(PECOFF_SECTION_ALIGNMENT);
 	__pecoff_data_virt_size = ABSOLUTE(. - __pecoff_text_end);
diff --git a/arch/riscv/mm/Makefile b/arch/riscv/mm/Makefile
index 7ebaef10ea1b..2d33ec574bbb 100644
--- a/arch/riscv/mm/Makefile
+++ b/arch/riscv/mm/Makefile
@@ -1,6 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
 CFLAGS_init.o := -mcmodel=medany
+ifdef CONFIG_RELOCATABLE
+CFLAGS_init.o += -fno-pie
+endif
+
 ifdef CONFIG_FTRACE
 CFLAGS_REMOVE_init.o = $(CC_FLAGS_FTRACE)
 CFLAGS_REMOVE_cacheflush.o = $(CC_FLAGS_FTRACE)
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index c0cddf0fc22d..42041c12d496 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -20,6 +20,9 @@
 #include <linux/dma-map-ops.h>
 #include <linux/crash_dump.h>
 #include <linux/hugetlb.h>
+#ifdef CONFIG_RELOCATABLE
+#include <linux/elf.h>
+#endif
 
 #include <asm/fixmap.h>
 #include <asm/tlbflush.h>
@@ -103,7 +106,7 @@ static void __init print_vm_layout(void)
 	print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
 		  (unsigned long)high_memory);
 #ifdef CONFIG_64BIT
-	print_mlm("kernel", (unsigned long)KERNEL_LINK_ADDR,
+	print_mlm("kernel", (unsigned long)kernel_map.virt_addr,
 		  (unsigned long)ADDRESS_SPACE_END);
 #endif
 }
@@ -518,6 +521,44 @@ static __init pgprot_t pgprot_from_va(uintptr_t va)
 #error "setup_vm() is called from head.S before relocate so it should not use absolute addressing."
 #endif
 
+#ifdef CONFIG_RELOCATABLE
+extern unsigned long __rela_dyn_start, __rela_dyn_end;
+
+static void __init relocate_kernel(void)
+{
+	Elf64_Rela *rela = (Elf64_Rela *)&__rela_dyn_start;
+	/*
+	 * This holds the offset between the linked virtual address and the
+	 * relocated virtual address.
+	 */
+	uintptr_t reloc_offset = kernel_map.virt_addr - KERNEL_LINK_ADDR;
+	/*
+	 * This holds the offset between kernel linked virtual address and
+	 * physical address.
+	 */
+	uintptr_t va_kernel_link_pa_offset = KERNEL_LINK_ADDR - kernel_map.phys_addr;
+
+	for ( ; rela < (Elf64_Rela *)&__rela_dyn_end; rela++) {
+		Elf64_Addr addr = (rela->r_offset - va_kernel_link_pa_offset);
+		Elf64_Addr relocated_addr = rela->r_addend;
+
+		if (rela->r_info != R_RISCV_RELATIVE)
+			continue;
+
+		/*
+		 * Make sure to not relocate vdso symbols like rt_sigreturn
+		 * which are linked from the address 0 in vmlinux since
+		 * vdso symbol addresses are actually used as an offset from
+		 * mm->context.vdso in VDSO_OFFSET macro.
+		 */
+		if (relocated_addr >= KERNEL_LINK_ADDR)
+			relocated_addr += reloc_offset;
+
+		*(Elf64_Addr *)addr = relocated_addr;
+	}
+}
+#endif /* CONFIG_RELOCATABLE */
+
 #ifdef CONFIG_XIP_KERNEL
 static void __init create_kernel_page_table(pgd_t *pgdir,
 					    __always_unused bool early)
@@ -625,6 +666,17 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
 	BUG_ON((kernel_map.virt_addr + kernel_map.size) > ADDRESS_SPACE_END - SZ_4K);
 #endif
 
+#ifdef CONFIG_RELOCATABLE
+	/*
+	 * Early page table uses only one PGDIR, which makes it possible
+	 * to map PGDIR_SIZE aligned on PGDIR_SIZE: if the relocation offset
+	 * makes the kernel cross over a PGDIR_SIZE boundary, raise a bug
+	 * since a part of the kernel would not get mapped.
+	 */
+	BUG_ON(PGDIR_SIZE - (kernel_map.virt_addr & (PGDIR_SIZE - 1)) < kernel_map.size);
+	relocate_kernel();
+#endif
+
 	pt_ops.alloc_pte = alloc_pte_early;
 	pt_ops.get_pte_virt = get_pte_virt_early;
 #ifndef __PAGETABLE_PMD_FOLDED
-- 
2.30.2


WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Ghiti <alexandre.ghiti@canonical.com>
To: Michael Ellerman <mpe@ellerman.id.au>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
	linux-riscv@lists.infradead.org
Cc: Alexandre Ghiti <alex@ghiti.fr>
Subject: [PATCH v7 1/3] riscv: Introduce CONFIG_RELOCATABLE
Date: Sat,  9 Oct 2021 19:12:57 +0200	[thread overview]
Message-ID: <20211009171259.2515351-2-alexandre.ghiti@canonical.com> (raw)
In-Reply-To: <20211009171259.2515351-1-alexandre.ghiti@canonical.com>

From: Alexandre Ghiti <alex@ghiti.fr>

This config allows to compile 64b kernel as PIE and to relocate it at
any virtual address at runtime: this paves the way to KASLR.
Runtime relocation is possible since relocation metadata are embedded into
the kernel.

Note that relocating at runtime introduces an overhead even if the
kernel is loaded at the same address it was linked at and that the compiler
options are those used in arm64 which uses the same RELA relocation
format.

Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
---
 arch/riscv/Kconfig              | 12 ++++++++
 arch/riscv/Makefile             |  7 +++--
 arch/riscv/kernel/vmlinux.lds.S |  6 ++++
 arch/riscv/mm/Makefile          |  4 +++
 arch/riscv/mm/init.c            | 54 ++++++++++++++++++++++++++++++++-
 5 files changed, 80 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index ea16fa2dd768..043ba92559fa 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -213,6 +213,18 @@ config PGTABLE_LEVELS
 config LOCKDEP_SUPPORT
 	def_bool y
 
+config RELOCATABLE
+	bool
+	depends on MMU && 64BIT && !XIP_KERNEL
+	help
+          This builds a kernel as a Position Independent Executable (PIE),
+          which retains all relocation metadata required to relocate the
+          kernel binary at runtime to a different virtual address than the
+          address it was linked at.
+          Since RISCV uses the RELA relocation format, this requires a
+          relocation pass at runtime even if the kernel is loaded at the
+          same address it was linked at.
+
 source "arch/riscv/Kconfig.socs"
 source "arch/riscv/Kconfig.erratas"
 
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 0eb4568fbd29..2f509915f246 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -9,9 +9,12 @@
 #
 
 OBJCOPYFLAGS    := -O binary
-LDFLAGS_vmlinux :=
+ifeq ($(CONFIG_RELOCATABLE),y)
+	LDFLAGS_vmlinux += -shared -Bsymbolic -z notext -z norelro
+	KBUILD_CFLAGS += -fPIE
+endif
 ifeq ($(CONFIG_DYNAMIC_FTRACE),y)
-	LDFLAGS_vmlinux := --no-relax
+	LDFLAGS_vmlinux += --no-relax
 	KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
 	CC_FLAGS_FTRACE := -fpatchable-function-entry=8
 endif
diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
index 5104f3a871e3..862a8c09723c 100644
--- a/arch/riscv/kernel/vmlinux.lds.S
+++ b/arch/riscv/kernel/vmlinux.lds.S
@@ -133,6 +133,12 @@ SECTIONS
 
 	BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
 
+	.rela.dyn : ALIGN(8) {
+		__rela_dyn_start = .;
+		*(.rela .rela*)
+		__rela_dyn_end = .;
+	}
+
 #ifdef CONFIG_EFI
 	. = ALIGN(PECOFF_SECTION_ALIGNMENT);
 	__pecoff_data_virt_size = ABSOLUTE(. - __pecoff_text_end);
diff --git a/arch/riscv/mm/Makefile b/arch/riscv/mm/Makefile
index 7ebaef10ea1b..2d33ec574bbb 100644
--- a/arch/riscv/mm/Makefile
+++ b/arch/riscv/mm/Makefile
@@ -1,6 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
 CFLAGS_init.o := -mcmodel=medany
+ifdef CONFIG_RELOCATABLE
+CFLAGS_init.o += -fno-pie
+endif
+
 ifdef CONFIG_FTRACE
 CFLAGS_REMOVE_init.o = $(CC_FLAGS_FTRACE)
 CFLAGS_REMOVE_cacheflush.o = $(CC_FLAGS_FTRACE)
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index c0cddf0fc22d..42041c12d496 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -20,6 +20,9 @@
 #include <linux/dma-map-ops.h>
 #include <linux/crash_dump.h>
 #include <linux/hugetlb.h>
+#ifdef CONFIG_RELOCATABLE
+#include <linux/elf.h>
+#endif
 
 #include <asm/fixmap.h>
 #include <asm/tlbflush.h>
@@ -103,7 +106,7 @@ static void __init print_vm_layout(void)
 	print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
 		  (unsigned long)high_memory);
 #ifdef CONFIG_64BIT
-	print_mlm("kernel", (unsigned long)KERNEL_LINK_ADDR,
+	print_mlm("kernel", (unsigned long)kernel_map.virt_addr,
 		  (unsigned long)ADDRESS_SPACE_END);
 #endif
 }
@@ -518,6 +521,44 @@ static __init pgprot_t pgprot_from_va(uintptr_t va)
 #error "setup_vm() is called from head.S before relocate so it should not use absolute addressing."
 #endif
 
+#ifdef CONFIG_RELOCATABLE
+extern unsigned long __rela_dyn_start, __rela_dyn_end;
+
+static void __init relocate_kernel(void)
+{
+	Elf64_Rela *rela = (Elf64_Rela *)&__rela_dyn_start;
+	/*
+	 * This holds the offset between the linked virtual address and the
+	 * relocated virtual address.
+	 */
+	uintptr_t reloc_offset = kernel_map.virt_addr - KERNEL_LINK_ADDR;
+	/*
+	 * This holds the offset between kernel linked virtual address and
+	 * physical address.
+	 */
+	uintptr_t va_kernel_link_pa_offset = KERNEL_LINK_ADDR - kernel_map.phys_addr;
+
+	for ( ; rela < (Elf64_Rela *)&__rela_dyn_end; rela++) {
+		Elf64_Addr addr = (rela->r_offset - va_kernel_link_pa_offset);
+		Elf64_Addr relocated_addr = rela->r_addend;
+
+		if (rela->r_info != R_RISCV_RELATIVE)
+			continue;
+
+		/*
+		 * Make sure to not relocate vdso symbols like rt_sigreturn
+		 * which are linked from the address 0 in vmlinux since
+		 * vdso symbol addresses are actually used as an offset from
+		 * mm->context.vdso in VDSO_OFFSET macro.
+		 */
+		if (relocated_addr >= KERNEL_LINK_ADDR)
+			relocated_addr += reloc_offset;
+
+		*(Elf64_Addr *)addr = relocated_addr;
+	}
+}
+#endif /* CONFIG_RELOCATABLE */
+
 #ifdef CONFIG_XIP_KERNEL
 static void __init create_kernel_page_table(pgd_t *pgdir,
 					    __always_unused bool early)
@@ -625,6 +666,17 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
 	BUG_ON((kernel_map.virt_addr + kernel_map.size) > ADDRESS_SPACE_END - SZ_4K);
 #endif
 
+#ifdef CONFIG_RELOCATABLE
+	/*
+	 * Early page table uses only one PGDIR, which makes it possible
+	 * to map PGDIR_SIZE aligned on PGDIR_SIZE: if the relocation offset
+	 * makes the kernel cross over a PGDIR_SIZE boundary, raise a bug
+	 * since a part of the kernel would not get mapped.
+	 */
+	BUG_ON(PGDIR_SIZE - (kernel_map.virt_addr & (PGDIR_SIZE - 1)) < kernel_map.size);
+	relocate_kernel();
+#endif
+
 	pt_ops.alloc_pte = alloc_pte_early;
 	pt_ops.get_pte_virt = get_pte_virt_early;
 #ifndef __PAGETABLE_PMD_FOLDED
-- 
2.30.2


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  reply	other threads:[~2021-10-09 17:14 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-09 17:12 [PATCH v7 0/3] Introduce 64b relocatable kernel Alexandre Ghiti
2021-10-09 17:12 ` Alexandre Ghiti
2021-10-09 17:12 ` Alexandre Ghiti [this message]
2021-10-09 17:12   ` [PATCH v7 1/3] riscv: Introduce CONFIG_RELOCATABLE Alexandre Ghiti
2021-10-09 17:20   ` Alexandre ghiti
2021-10-09 17:20     ` Alexandre ghiti
2021-10-26 21:29     ` Palmer Dabbelt
2021-10-26 21:29       ` Palmer Dabbelt
2021-10-26 21:29       ` Palmer Dabbelt
2021-10-27  5:04       ` Alexandre ghiti
2021-10-27  5:04         ` Alexandre ghiti
2021-10-27  5:04         ` Alexandre ghiti
2021-12-06  9:44         ` Alexandre ghiti
2021-12-06  9:44           ` Alexandre ghiti
2021-12-06  9:44           ` Alexandre ghiti
2022-01-10  8:05           ` Alexandre ghiti
2022-01-10  8:05             ` Alexandre ghiti
2022-01-10  8:05             ` Alexandre ghiti
2022-02-18 10:47             ` Alexandre Ghiti
2022-02-18 10:47               ` Alexandre Ghiti
2022-02-18 10:47               ` Alexandre Ghiti
2021-10-09 17:12 ` [PATCH v7 2/3] powerpc: Move script to check relocations at compile time in scripts/ Alexandre Ghiti
2021-10-09 17:12   ` Alexandre Ghiti
2021-10-09 17:12   ` Alexandre Ghiti
2021-10-09 17:12 ` [PATCH v7 3/3] riscv: Check relocations at compile time Alexandre Ghiti
2021-10-09 17:12   ` Alexandre Ghiti
2021-10-09 17:12   ` Alexandre Ghiti

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211009171259.2515351-2-alexandre.ghiti@canonical.com \
    --to=alexandre.ghiti@canonical.com \
    --cc=alex@ghiti.fr \
    --cc=aou@eecs.berkeley.edu \
    --cc=benh@kernel.crashing.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.