* [PATCH 0/3] arm64: dts: meson: fixups for WeTek common dtsi
@ 2021-10-12 5:25 ` Christian Hewitt
0 siblings, 0 replies; 24+ messages in thread
From: Christian Hewitt @ 2021-10-12 5:25 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Two fixes from work on u-boot support and following access to the original
vendor schematics, plus a minor change to use revised LED bindings.
- Mark VDDIO_AO18 always-on and link hdmi-supply to fix HDMI on boot
- Add missing GPIO binding
- Update LED bindings
Christian Hewitt (3):
arm64: dts: meson-gxbb-wetek: fix HDMI in early boot
arm64: dts: meson-gxbb-wetek: fix missing GPIO binding
arm64: dts: meson-gxbb-wetek: use updated LED bindings
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--
2.17.1
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 0/3] arm64: dts: meson: fixups for WeTek common dtsi
@ 2021-10-12 5:25 ` Christian Hewitt
0 siblings, 0 replies; 24+ messages in thread
From: Christian Hewitt @ 2021-10-12 5:25 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Two fixes from work on u-boot support and following access to the original
vendor schematics, plus a minor change to use revised LED bindings.
- Mark VDDIO_AO18 always-on and link hdmi-supply to fix HDMI on boot
- Add missing GPIO binding
- Update LED bindings
Christian Hewitt (3):
arm64: dts: meson-gxbb-wetek: fix HDMI in early boot
arm64: dts: meson-gxbb-wetek: fix missing GPIO binding
arm64: dts: meson-gxbb-wetek: use updated LED bindings
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 0/3] arm64: dts: meson: fixups for WeTek common dtsi
@ 2021-10-12 5:25 ` Christian Hewitt
0 siblings, 0 replies; 24+ messages in thread
From: Christian Hewitt @ 2021-10-12 5:25 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Two fixes from work on u-boot support and following access to the original
vendor schematics, plus a minor change to use revised LED bindings.
- Mark VDDIO_AO18 always-on and link hdmi-supply to fix HDMI on boot
- Add missing GPIO binding
- Update LED bindings
Christian Hewitt (3):
arm64: dts: meson-gxbb-wetek: fix HDMI in early boot
arm64: dts: meson-gxbb-wetek: fix missing GPIO binding
arm64: dts: meson-gxbb-wetek: use updated LED bindings
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 1/3] arm64: dts: meson-gxbb-wetek: fix HDMI in early boot
2021-10-12 5:25 ` Christian Hewitt
(?)
@ 2021-10-12 5:25 ` Christian Hewitt
-1 siblings, 0 replies; 24+ messages in thread
From: Christian Hewitt @ 2021-10-12 5:25 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Mark the VDDIO_AO18 regulator always-on and set hdmi-supply for the hdmi_tx
node to ensure HDMI is powered in the early stages of boot.
Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index a350fee1264d..8e2af986ceba 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -64,6 +64,7 @@
regulator-name = "VDDIO_AO18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
vcc_3v3: regulator-vcc_3v3 {
@@ -161,6 +162,7 @@
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
+ hdmi-supply = <&vddio_ao18>;
};
&hdmi_tx_tmds_port {
--
2.17.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 1/3] arm64: dts: meson-gxbb-wetek: fix HDMI in early boot
@ 2021-10-12 5:25 ` Christian Hewitt
0 siblings, 0 replies; 24+ messages in thread
From: Christian Hewitt @ 2021-10-12 5:25 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Mark the VDDIO_AO18 regulator always-on and set hdmi-supply for the hdmi_tx
node to ensure HDMI is powered in the early stages of boot.
Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index a350fee1264d..8e2af986ceba 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -64,6 +64,7 @@
regulator-name = "VDDIO_AO18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
vcc_3v3: regulator-vcc_3v3 {
@@ -161,6 +162,7 @@
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
+ hdmi-supply = <&vddio_ao18>;
};
&hdmi_tx_tmds_port {
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 1/3] arm64: dts: meson-gxbb-wetek: fix HDMI in early boot
@ 2021-10-12 5:25 ` Christian Hewitt
0 siblings, 0 replies; 24+ messages in thread
From: Christian Hewitt @ 2021-10-12 5:25 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Mark the VDDIO_AO18 regulator always-on and set hdmi-supply for the hdmi_tx
node to ensure HDMI is powered in the early stages of boot.
Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index a350fee1264d..8e2af986ceba 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -64,6 +64,7 @@
regulator-name = "VDDIO_AO18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
vcc_3v3: regulator-vcc_3v3 {
@@ -161,6 +162,7 @@
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
+ hdmi-supply = <&vddio_ao18>;
};
&hdmi_tx_tmds_port {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 2/3] arm64: dts: meson-gxbb-wetek: fix missing GPIO binding
2021-10-12 5:25 ` Christian Hewitt
(?)
@ 2021-10-12 5:25 ` Christian Hewitt
-1 siblings, 0 replies; 24+ messages in thread
From: Christian Hewitt @ 2021-10-12 5:25 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
The absence of this binding appears to be harmless in Linux but it breaks
Ethernet support in mainline u-boot. So add the binding (which is present
in all other u-boot supported GXBB device-trees).
Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index 8e2af986ceba..a4d34398da35 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -6,6 +6,7 @@
*/
#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
--
2.17.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 2/3] arm64: dts: meson-gxbb-wetek: fix missing GPIO binding
@ 2021-10-12 5:25 ` Christian Hewitt
0 siblings, 0 replies; 24+ messages in thread
From: Christian Hewitt @ 2021-10-12 5:25 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
The absence of this binding appears to be harmless in Linux but it breaks
Ethernet support in mainline u-boot. So add the binding (which is present
in all other u-boot supported GXBB device-trees).
Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index 8e2af986ceba..a4d34398da35 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -6,6 +6,7 @@
*/
#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 2/3] arm64: dts: meson-gxbb-wetek: fix missing GPIO binding
@ 2021-10-12 5:25 ` Christian Hewitt
0 siblings, 0 replies; 24+ messages in thread
From: Christian Hewitt @ 2021-10-12 5:25 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
The absence of this binding appears to be harmless in Linux but it breaks
Ethernet support in mainline u-boot. So add the binding (which is present
in all other u-boot supported GXBB device-trees).
Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index 8e2af986ceba..a4d34398da35 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -6,6 +6,7 @@
*/
#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 3/3] arm64: dts: meson-gxbb-wetek: use updated LED bindings
2021-10-12 5:25 ` Christian Hewitt
(?)
@ 2021-10-12 5:25 ` Christian Hewitt
-1 siblings, 0 replies; 24+ messages in thread
From: Christian Hewitt @ 2021-10-12 5:25 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Update the dts to use the newer style of LED bindings.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index a4d34398da35..94dafb955301 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -7,6 +7,7 @@
#include "meson-gxbb.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
@@ -26,8 +27,10 @@
leds {
compatible = "gpio-leds";
- led-system {
- label = "wetek-play:system-status";
+ led-power {
+ /* red in suspend or power-off */
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_POWER;
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
default-state = "on";
panic-indicator;
--
2.17.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 3/3] arm64: dts: meson-gxbb-wetek: use updated LED bindings
@ 2021-10-12 5:25 ` Christian Hewitt
0 siblings, 0 replies; 24+ messages in thread
From: Christian Hewitt @ 2021-10-12 5:25 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Update the dts to use the newer style of LED bindings.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index a4d34398da35..94dafb955301 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -7,6 +7,7 @@
#include "meson-gxbb.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
@@ -26,8 +27,10 @@
leds {
compatible = "gpio-leds";
- led-system {
- label = "wetek-play:system-status";
+ led-power {
+ /* red in suspend or power-off */
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_POWER;
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
default-state = "on";
panic-indicator;
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 3/3] arm64: dts: meson-gxbb-wetek: use updated LED bindings
@ 2021-10-12 5:25 ` Christian Hewitt
0 siblings, 0 replies; 24+ messages in thread
From: Christian Hewitt @ 2021-10-12 5:25 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Update the dts to use the newer style of LED bindings.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index a4d34398da35..94dafb955301 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -7,6 +7,7 @@
#include "meson-gxbb.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
@@ -26,8 +27,10 @@
leds {
compatible = "gpio-leds";
- led-system {
- label = "wetek-play:system-status";
+ led-power {
+ /* red in suspend or power-off */
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_POWER;
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
default-state = "on";
panic-indicator;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] arm64: dts: meson-gxbb-wetek: fix HDMI in early boot
2021-10-12 5:25 ` Christian Hewitt
(?)
@ 2021-11-15 9:24 ` Neil Armstrong
-1 siblings, 0 replies; 24+ messages in thread
From: Neil Armstrong @ 2021-11-15 9:24 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, Kevin Hilman,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
On 12/10/2021 07:25, Christian Hewitt wrote:
> Mark the VDDIO_AO18 regulator always-on and set hdmi-supply for the hdmi_tx
> node to ensure HDMI is powered in the early stages of boot.
>
> Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> index a350fee1264d..8e2af986ceba 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> @@ -64,6 +64,7 @@
> regulator-name = "VDDIO_AO18";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> };
>
> vcc_3v3: regulator-vcc_3v3 {
> @@ -161,6 +162,7 @@
> status = "okay";
> pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
> pinctrl-names = "default";
> + hdmi-supply = <&vddio_ao18>;
> };
>
> &hdmi_tx_tmds_port {
>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] arm64: dts: meson-gxbb-wetek: fix HDMI in early boot
@ 2021-11-15 9:24 ` Neil Armstrong
0 siblings, 0 replies; 24+ messages in thread
From: Neil Armstrong @ 2021-11-15 9:24 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, Kevin Hilman,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
On 12/10/2021 07:25, Christian Hewitt wrote:
> Mark the VDDIO_AO18 regulator always-on and set hdmi-supply for the hdmi_tx
> node to ensure HDMI is powered in the early stages of boot.
>
> Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> index a350fee1264d..8e2af986ceba 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> @@ -64,6 +64,7 @@
> regulator-name = "VDDIO_AO18";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> };
>
> vcc_3v3: regulator-vcc_3v3 {
> @@ -161,6 +162,7 @@
> status = "okay";
> pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
> pinctrl-names = "default";
> + hdmi-supply = <&vddio_ao18>;
> };
>
> &hdmi_tx_tmds_port {
>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] arm64: dts: meson-gxbb-wetek: fix HDMI in early boot
@ 2021-11-15 9:24 ` Neil Armstrong
0 siblings, 0 replies; 24+ messages in thread
From: Neil Armstrong @ 2021-11-15 9:24 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, Kevin Hilman,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
On 12/10/2021 07:25, Christian Hewitt wrote:
> Mark the VDDIO_AO18 regulator always-on and set hdmi-supply for the hdmi_tx
> node to ensure HDMI is powered in the early stages of boot.
>
> Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> index a350fee1264d..8e2af986ceba 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> @@ -64,6 +64,7 @@
> regulator-name = "VDDIO_AO18";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> };
>
> vcc_3v3: regulator-vcc_3v3 {
> @@ -161,6 +162,7 @@
> status = "okay";
> pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
> pinctrl-names = "default";
> + hdmi-supply = <&vddio_ao18>;
> };
>
> &hdmi_tx_tmds_port {
>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 2/3] arm64: dts: meson-gxbb-wetek: fix missing GPIO binding
2021-10-12 5:25 ` Christian Hewitt
(?)
@ 2021-11-15 9:24 ` Neil Armstrong
-1 siblings, 0 replies; 24+ messages in thread
From: Neil Armstrong @ 2021-11-15 9:24 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, Kevin Hilman,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
On 12/10/2021 07:25, Christian Hewitt wrote:
> The absence of this binding appears to be harmless in Linux but it breaks
> Ethernet support in mainline u-boot. So add the binding (which is present
> in all other u-boot supported GXBB device-trees).
>
> Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> index 8e2af986ceba..a4d34398da35 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> @@ -6,6 +6,7 @@
> */
>
> #include "meson-gxbb.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>
> / {
> aliases {
>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 2/3] arm64: dts: meson-gxbb-wetek: fix missing GPIO binding
@ 2021-11-15 9:24 ` Neil Armstrong
0 siblings, 0 replies; 24+ messages in thread
From: Neil Armstrong @ 2021-11-15 9:24 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, Kevin Hilman,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
On 12/10/2021 07:25, Christian Hewitt wrote:
> The absence of this binding appears to be harmless in Linux but it breaks
> Ethernet support in mainline u-boot. So add the binding (which is present
> in all other u-boot supported GXBB device-trees).
>
> Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> index 8e2af986ceba..a4d34398da35 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> @@ -6,6 +6,7 @@
> */
>
> #include "meson-gxbb.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>
> / {
> aliases {
>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 2/3] arm64: dts: meson-gxbb-wetek: fix missing GPIO binding
@ 2021-11-15 9:24 ` Neil Armstrong
0 siblings, 0 replies; 24+ messages in thread
From: Neil Armstrong @ 2021-11-15 9:24 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, Kevin Hilman,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
On 12/10/2021 07:25, Christian Hewitt wrote:
> The absence of this binding appears to be harmless in Linux but it breaks
> Ethernet support in mainline u-boot. So add the binding (which is present
> in all other u-boot supported GXBB device-trees).
>
> Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> index 8e2af986ceba..a4d34398da35 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> @@ -6,6 +6,7 @@
> */
>
> #include "meson-gxbb.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>
> / {
> aliases {
>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] arm64: dts: meson-gxbb-wetek: use updated LED bindings
2021-10-12 5:25 ` Christian Hewitt
(?)
@ 2021-11-15 9:25 ` Neil Armstrong
-1 siblings, 0 replies; 24+ messages in thread
From: Neil Armstrong @ 2021-11-15 9:25 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, Kevin Hilman,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
On 12/10/2021 07:25, Christian Hewitt wrote:
> Update the dts to use the newer style of LED bindings.
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> index a4d34398da35..94dafb955301 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> @@ -7,6 +7,7 @@
>
> #include "meson-gxbb.dtsi"
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
>
> / {
> aliases {
> @@ -26,8 +27,10 @@
> leds {
> compatible = "gpio-leds";
>
> - led-system {
> - label = "wetek-play:system-status";
> + led-power {
> + /* red in suspend or power-off */
> + color = <LED_COLOR_ID_BLUE>;
> + function = LED_FUNCTION_POWER;
> gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> panic-indicator;
>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] arm64: dts: meson-gxbb-wetek: use updated LED bindings
@ 2021-11-15 9:25 ` Neil Armstrong
0 siblings, 0 replies; 24+ messages in thread
From: Neil Armstrong @ 2021-11-15 9:25 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, Kevin Hilman,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
On 12/10/2021 07:25, Christian Hewitt wrote:
> Update the dts to use the newer style of LED bindings.
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> index a4d34398da35..94dafb955301 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> @@ -7,6 +7,7 @@
>
> #include "meson-gxbb.dtsi"
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
>
> / {
> aliases {
> @@ -26,8 +27,10 @@
> leds {
> compatible = "gpio-leds";
>
> - led-system {
> - label = "wetek-play:system-status";
> + led-power {
> + /* red in suspend or power-off */
> + color = <LED_COLOR_ID_BLUE>;
> + function = LED_FUNCTION_POWER;
> gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> panic-indicator;
>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] arm64: dts: meson-gxbb-wetek: use updated LED bindings
@ 2021-11-15 9:25 ` Neil Armstrong
0 siblings, 0 replies; 24+ messages in thread
From: Neil Armstrong @ 2021-11-15 9:25 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, Kevin Hilman,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
On 12/10/2021 07:25, Christian Hewitt wrote:
> Update the dts to use the newer style of LED bindings.
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> index a4d34398da35..94dafb955301 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
> @@ -7,6 +7,7 @@
>
> #include "meson-gxbb.dtsi"
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
>
> / {
> aliases {
> @@ -26,8 +27,10 @@
> leds {
> compatible = "gpio-leds";
>
> - led-system {
> - label = "wetek-play:system-status";
> + led-power {
> + /* red in suspend or power-off */
> + color = <LED_COLOR_ID_BLUE>;
> + function = LED_FUNCTION_POWER;
> gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> panic-indicator;
>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 0/3] arm64: dts: meson: fixups for WeTek common dtsi
2021-10-12 5:25 ` Christian Hewitt
(?)
@ 2021-11-15 9:29 ` Neil Armstrong
-1 siblings, 0 replies; 24+ messages in thread
From: Neil Armstrong @ 2021-11-15 9:29 UTC (permalink / raw)
To: Rob Herring, linux-arm-kernel, linux-amlogic, devicetree,
Mark Rutland, Christian Hewitt, Kevin Hilman, linux-kernel
Cc: Neil Armstrong
Hi,
On Tue, 12 Oct 2021 05:25:19 +0000, Christian Hewitt wrote:
> Two fixes from work on u-boot support and following access to the original
> vendor schematics, plus a minor change to use revised LED bindings.
>
> - Mark VDDIO_AO18 always-on and link hdmi-supply to fix HDMI on boot
> - Add missing GPIO binding
> - Update LED bindings
>
> [...]
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v5.17/dt64)
[1/3] arm64: dts: meson-gxbb-wetek: fix HDMI in early boot
https://git.kernel.org/amlogic/c/8182a35868db5f053111d5d9d4da8fcb3f99259d
[2/3] arm64: dts: meson-gxbb-wetek: fix missing GPIO binding
https://git.kernel.org/amlogic/c/c019abb2feba3cbbd7cf7178f8e6499c4fa6fced
[3/3] arm64: dts: meson-gxbb-wetek: use updated LED bindings
https://git.kernel.org/amlogic/c/1e9fc71213d784dfbd153289daf08fdfc87f32ba
--
Neil
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 0/3] arm64: dts: meson: fixups for WeTek common dtsi
@ 2021-11-15 9:29 ` Neil Armstrong
0 siblings, 0 replies; 24+ messages in thread
From: Neil Armstrong @ 2021-11-15 9:29 UTC (permalink / raw)
To: Rob Herring, linux-arm-kernel, linux-amlogic, devicetree,
Mark Rutland, Christian Hewitt, Kevin Hilman, linux-kernel
Cc: Neil Armstrong
Hi,
On Tue, 12 Oct 2021 05:25:19 +0000, Christian Hewitt wrote:
> Two fixes from work on u-boot support and following access to the original
> vendor schematics, plus a minor change to use revised LED bindings.
>
> - Mark VDDIO_AO18 always-on and link hdmi-supply to fix HDMI on boot
> - Add missing GPIO binding
> - Update LED bindings
>
> [...]
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v5.17/dt64)
[1/3] arm64: dts: meson-gxbb-wetek: fix HDMI in early boot
https://git.kernel.org/amlogic/c/8182a35868db5f053111d5d9d4da8fcb3f99259d
[2/3] arm64: dts: meson-gxbb-wetek: fix missing GPIO binding
https://git.kernel.org/amlogic/c/c019abb2feba3cbbd7cf7178f8e6499c4fa6fced
[3/3] arm64: dts: meson-gxbb-wetek: use updated LED bindings
https://git.kernel.org/amlogic/c/1e9fc71213d784dfbd153289daf08fdfc87f32ba
--
Neil
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 0/3] arm64: dts: meson: fixups for WeTek common dtsi
@ 2021-11-15 9:29 ` Neil Armstrong
0 siblings, 0 replies; 24+ messages in thread
From: Neil Armstrong @ 2021-11-15 9:29 UTC (permalink / raw)
To: Rob Herring, linux-arm-kernel, linux-amlogic, devicetree,
Mark Rutland, Christian Hewitt, Kevin Hilman, linux-kernel
Cc: Neil Armstrong
Hi,
On Tue, 12 Oct 2021 05:25:19 +0000, Christian Hewitt wrote:
> Two fixes from work on u-boot support and following access to the original
> vendor schematics, plus a minor change to use revised LED bindings.
>
> - Mark VDDIO_AO18 always-on and link hdmi-supply to fix HDMI on boot
> - Add missing GPIO binding
> - Update LED bindings
>
> [...]
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v5.17/dt64)
[1/3] arm64: dts: meson-gxbb-wetek: fix HDMI in early boot
https://git.kernel.org/amlogic/c/8182a35868db5f053111d5d9d4da8fcb3f99259d
[2/3] arm64: dts: meson-gxbb-wetek: fix missing GPIO binding
https://git.kernel.org/amlogic/c/c019abb2feba3cbbd7cf7178f8e6499c4fa6fced
[3/3] arm64: dts: meson-gxbb-wetek: use updated LED bindings
https://git.kernel.org/amlogic/c/1e9fc71213d784dfbd153289daf08fdfc87f32ba
--
Neil
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2021-11-15 10:03 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-12 5:25 [PATCH 0/3] arm64: dts: meson: fixups for WeTek common dtsi Christian Hewitt
2021-10-12 5:25 ` Christian Hewitt
2021-10-12 5:25 ` Christian Hewitt
2021-10-12 5:25 ` [PATCH 1/3] arm64: dts: meson-gxbb-wetek: fix HDMI in early boot Christian Hewitt
2021-10-12 5:25 ` Christian Hewitt
2021-10-12 5:25 ` Christian Hewitt
2021-11-15 9:24 ` Neil Armstrong
2021-11-15 9:24 ` Neil Armstrong
2021-11-15 9:24 ` Neil Armstrong
2021-10-12 5:25 ` [PATCH 2/3] arm64: dts: meson-gxbb-wetek: fix missing GPIO binding Christian Hewitt
2021-10-12 5:25 ` Christian Hewitt
2021-10-12 5:25 ` Christian Hewitt
2021-11-15 9:24 ` Neil Armstrong
2021-11-15 9:24 ` Neil Armstrong
2021-11-15 9:24 ` Neil Armstrong
2021-10-12 5:25 ` [PATCH 3/3] arm64: dts: meson-gxbb-wetek: use updated LED bindings Christian Hewitt
2021-10-12 5:25 ` Christian Hewitt
2021-10-12 5:25 ` Christian Hewitt
2021-11-15 9:25 ` Neil Armstrong
2021-11-15 9:25 ` Neil Armstrong
2021-11-15 9:25 ` Neil Armstrong
2021-11-15 9:29 ` [PATCH 0/3] arm64: dts: meson: fixups for WeTek common dtsi Neil Armstrong
2021-11-15 9:29 ` Neil Armstrong
2021-11-15 9:29 ` Neil Armstrong
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.