* Pull request: u-boot-sunxi/master for v2022.01
@ 2021-10-12 12:58 Andre Przywara
2021-10-12 15:49 ` Tom Rini
0 siblings, 1 reply; 4+ messages in thread
From: Andre Przywara @ 2021-10-12 12:58 UTC (permalink / raw)
To: Tom Rini; +Cc: u-boot, Jagan Teki, Samuel Holland, Chukun Pan, Arnaud Ferraris
Hi Tom,
please pull the sunxi/master branch, containing the first part of the
2022.01 changes.
The bulk of it is Samuel's DM_I2C rework, which removes the nasty
I2C deprecation warnings for most 32-bit boards. It also includes some
smaller refactorings that pave the way for more changes, mostly driven
by needing to support the Allwinner RISC-V SoC later on.
Board wise we gain support for the FriendlyARM NanoPi R1S H5 router board
and official Pinetab support.
Build-tested for all 160 sunxi boards, and boot tested on a A64, A20, H3,
H6, and H616 board. USB, SD card, eMMC, and Ethernet all work there
(where applicable).
Thanks,
Andre
==============
The following changes since commit f331497d3ad4166f9826e7674793ae04094b29c1:
Merge tag 'video-20211009' of https://source.denx.de/u-boot/custodians/u-boot-video (2021-10-09 17:47:27 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to f9437b00c06382d3edc623c10c69901786ad6317:
sunxi: Enable DM_I2C for all sunxi boards (2021-10-12 11:01:27 +0100)
----------------------------------------------------------------
Arnaud Ferraris (3):
configs: add PineTab defconfig
board: sunxi: enable status LED early
pinephone_defconfig: add support for early-boot status LED
Chukun Pan (1):
sunxi: Add support for FriendlyARM NanoPi R1S H5
Samuel Holland (20):
clk: sunxi: Move header out of arch directory
sunxi: Simplify MMC pinmux selection
gpio: sunxi: Remove the sunxi_name_to_gpio_bank function
sunxi: Clean up inclusions of asm/arch/gpio.h
sunxi: gpio: Remove name_to_gpio macro
sunxi: gpio: Remove bank-specific size macros
clk: sunxi: Add support for I2C gates/resets
clk: sunxi: Add drivers for A31 and H6 PRCM CCUs
power: pmic: Consistently depend on DM_PMIC
power: pmic: Consistently depend on SPL_DM_PMIC
power: pmic: Add a driver for X-Powers AXP PMICs
sunxi: Only initialize legacy I2C when enabled
sunxi: Select SUN8I_RSB more carefully
sunxi: pmic_bus: Fix Kconfig dependencies
i2c: Add a DM_I2C driver for the sun6i P2WI controller
i2c: Add a DM_I2C driver for the sun8i RSB controller
sunxi: pmic_bus: Clean up preprocessor conditions
sunxi: pmic_bus: Use the DM PMIC interface when possible
sunxi: video: Convert panel I2C to use DM_I2C
sunxi: Enable DM_I2C for all sunxi boards
arch/arm/Kconfig | 1 +
arch/arm/dts/Makefile | 1 +
arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts | 195 ++++++++++++++
arch/arm/include/asm/arch-sunxi/gpio.h | 20 +-
arch/arm/mach-sunxi/Kconfig | 79 ++----
arch/arm/mach-sunxi/Makefile | 2 -
arch/arm/mach-sunxi/board.c | 3 +-
arch/arm/mach-sunxi/clock.c | 1 -
arch/arm/mach-sunxi/clock_sun4i.c | 1 -
arch/arm/mach-sunxi/p2wi.c | 117 ---------
arch/arm/mach-sunxi/pmic_bus.c | 109 ++++----
arch/arm/mach-sunxi/rsb.c | 175 -------------
board/sunxi/MAINTAINERS | 10 +
board/sunxi/board.c | 152 +++--------
board/sunxi/gmac.c | 1 -
configs/A20-Olimex-SOM-EVB_defconfig | 1 -
configs/Colombus_defconfig | 6 -
configs/Cubieboard4_defconfig | 1 +
configs/Merrii_A80_Optimus_defconfig | 1 +
configs/Sinlinx_SinA31s_defconfig | 1 -
configs/UTOO_P66_defconfig | 3 -
configs/Yones_Toptech_BD1078_defconfig | 2 +-
configs/nanopi_r1s_h5_defconfig | 14 +
configs/parrot_r16_defconfig | 1 -
configs/pinephone_defconfig | 6 +
configs/pinetab_defconfig | 10 +
drivers/clk/sunxi/Kconfig | 14 +
drivers/clk/sunxi/Makefile | 2 +
drivers/clk/sunxi/clk_a10.c | 7 +-
drivers/clk/sunxi/clk_a10s.c | 5 +-
drivers/clk/sunxi/clk_a23.c | 8 +-
drivers/clk/sunxi/clk_a31.c | 10 +-
drivers/clk/sunxi/clk_a31_r.c | 59 +++++
drivers/clk/sunxi/clk_a64.c | 8 +-
drivers/clk/sunxi/clk_a80.c | 12 +-
drivers/clk/sunxi/clk_a83t.c | 8 +-
drivers/clk/sunxi/clk_h3.c | 8 +-
drivers/clk/sunxi/clk_h6.c | 12 +-
drivers/clk/sunxi/clk_h616.c | 14 +-
drivers/clk/sunxi/clk_h6_r.c | 61 +++++
drivers/clk/sunxi/clk_r40.c | 12 +-
drivers/clk/sunxi/clk_sunxi.c | 2 +-
drivers/clk/sunxi/clk_v3s.c | 6 +-
drivers/gpio/axp_gpio.c | 1 -
drivers/gpio/sunxi_gpio.c | 17 --
drivers/i2c/Kconfig | 16 ++
drivers/i2c/Makefile | 2 +
drivers/i2c/sun6i_p2wi.c | 220 ++++++++++++++++
drivers/i2c/sun8i_rsb.c | 281 +++++++++++++++++++++
drivers/mmc/sunxi_mmc.c | 3 +-
drivers/net/sun8i_emac.c | 5 +-
drivers/power/axp809.c | 1 -
drivers/power/axp818.c | 1 -
drivers/power/pmic/Kconfig | 69 +++--
drivers/power/pmic/Makefile | 1 +
drivers/power/pmic/axp.c | 38 +++
drivers/reset/reset-sunxi.c | 2 +-
drivers/spi/spi-sunxi.c | 2 +-
drivers/usb/musb-new/sunxi.c | 2 -
drivers/video/Kconfig | 10 +-
drivers/video/anx9804.c | 103 ++++----
drivers/video/anx9804.h | 5 +-
drivers/video/hitachi_tx18d42vm_lcd.c | 6 +-
drivers/video/sunxi/sunxi_display.c | 66 +++--
drivers/video/sunxi/sunxi_lcd.c | 1 -
include/axp_pmic.h | 12 +
.../asm/arch-sunxi/ccu.h => include/clk/sunxi.h | 8 +-
include/configs/sunxi-common.h | 17 --
68 files changed, 1307 insertions(+), 743 deletions(-)
create mode 100644 arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts
delete mode 100644 arch/arm/mach-sunxi/p2wi.c
delete mode 100644 arch/arm/mach-sunxi/rsb.c
create mode 100644 configs/nanopi_r1s_h5_defconfig
create mode 100644 configs/pinetab_defconfig
create mode 100644 drivers/clk/sunxi/clk_a31_r.c
create mode 100644 drivers/clk/sunxi/clk_h6_r.c
create mode 100644 drivers/i2c/sun6i_p2wi.c
create mode 100644 drivers/i2c/sun8i_rsb.c
create mode 100644 drivers/power/pmic/axp.c
rename arch/arm/include/asm/arch-sunxi/ccu.h => include/clk/sunxi.h (94%)
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Pull request: u-boot-sunxi/master for v2022.01
2021-10-12 12:58 Pull request: u-boot-sunxi/master for v2022.01 Andre Przywara
@ 2021-10-12 15:49 ` Tom Rini
2021-10-12 16:15 ` Andre Przywara
0 siblings, 1 reply; 4+ messages in thread
From: Tom Rini @ 2021-10-12 15:49 UTC (permalink / raw)
To: Andre Przywara, Mingkai Hu, Rajesh Bhagat, Priyanka Jain
Cc: u-boot, Jagan Teki, Samuel Holland, Chukun Pan, Arnaud Ferraris
[-- Attachment #1: Type: text/plain, Size: 1603 bytes --]
On Tue, Oct 12, 2021 at 01:58:18PM +0100, Andre Przywara wrote:
> Hi Tom,
>
> please pull the sunxi/master branch, containing the first part of the
> 2022.01 changes.
>
> The bulk of it is Samuel's DM_I2C rework, which removes the nasty
> I2C deprecation warnings for most 32-bit boards. It also includes some
> smaller refactorings that pave the way for more changes, mostly driven
> by needing to support the Allwinner RISC-V SoC later on.
>
> Board wise we gain support for the FriendlyARM NanoPi R1S H5 router board
> and official Pinetab support.
>
> Build-tested for all 160 sunxi boards, and boot tested on a A64, A20, H3,
> H6, and H616 board. USB, SD card, eMMC, and Ethernet all work there
> (where applicable).
>
> Thanks,
> Andre
>
> ==============
> The following changes since commit f331497d3ad4166f9826e7674793ae04094b29c1:
>
> Merge tag 'video-20211009' of https://source.denx.de/u-boot/custodians/u-boot-video (2021-10-09 17:47:27 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to f9437b00c06382d3edc623c10c69901786ad6317:
>
> sunxi: Enable DM_I2C for all sunxi boards (2021-10-12 11:01:27 +0100)
>
Note that the POWER_MC34VR500 PMIC driver is NOT converted to DM, so I
had to move the Kconfig entry for that around in order to avoid a new
Kconfig warning when building. I've added some NXP folks to the email
here because that's a conversion that needs doing ASAP.
With that said, this PR is applied to u-boot/master, thanks!
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Pull request: u-boot-sunxi/master for v2022.01
2021-10-12 15:49 ` Tom Rini
@ 2021-10-12 16:15 ` Andre Przywara
2021-10-12 16:21 ` Tom Rini
0 siblings, 1 reply; 4+ messages in thread
From: Andre Przywara @ 2021-10-12 16:15 UTC (permalink / raw)
To: Tom Rini
Cc: Mingkai Hu, Rajesh Bhagat, Priyanka Jain, u-boot, Jagan Teki,
Samuel Holland, Chukun Pan, Arnaud Ferraris
On Tue, 12 Oct 2021 11:49:02 -0400
Tom Rini <trini@konsulko.com> wrote:
Hi Tom,
> On Tue, Oct 12, 2021 at 01:58:18PM +0100, Andre Przywara wrote:
>
> > Hi Tom,
> >
> > please pull the sunxi/master branch, containing the first part of the
> > 2022.01 changes.
> >
> > The bulk of it is Samuel's DM_I2C rework, which removes the nasty
> > I2C deprecation warnings for most 32-bit boards. It also includes some
> > smaller refactorings that pave the way for more changes, mostly driven
> > by needing to support the Allwinner RISC-V SoC later on.
> >
> > Board wise we gain support for the FriendlyARM NanoPi R1S H5 router board
> > and official Pinetab support.
> >
> > Build-tested for all 160 sunxi boards, and boot tested on a A64, A20, H3,
> > H6, and H616 board. USB, SD card, eMMC, and Ethernet all work there
> > (where applicable).
> >
> > Thanks,
> > Andre
> >
> > ==============
> > The following changes since commit f331497d3ad4166f9826e7674793ae04094b29c1:
> >
> > Merge tag 'video-20211009' of https://source.denx.de/u-boot/custodians/u-boot-video (2021-10-09 17:47:27 -0400)
> >
> > are available in the Git repository at:
> >
> > git://git.denx.de/u-boot-sunxi.git master
> >
> > for you to fetch changes up to f9437b00c06382d3edc623c10c69901786ad6317:
> >
> > sunxi: Enable DM_I2C for all sunxi boards (2021-10-12 11:01:27 +0100)
> >
>
> Note that the POWER_MC34VR500 PMIC driver is NOT converted to DM, so I
> had to move the Kconfig entry for that around in order to avoid a new
> Kconfig warning when building.
Oh, sorry for that! I just see that the commit message speaks of
DM_PMIC_MC34708, but it's indeed POWER_MC34VR500 that (wrongfully) gains
the dependency. For the next tests I will try to find some idle machine
and build more boards than just sunxi!
So thanks for the heads up and the quick fix!
> I've added some NXP folks to the email
> here because that's a conversion that needs doing ASAP.
>
> With that said, this PR is applied to u-boot/master, thanks!
Many thanks!
Cheers,
Andre
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Pull request: u-boot-sunxi/master for v2022.01
2021-10-12 16:15 ` Andre Przywara
@ 2021-10-12 16:21 ` Tom Rini
0 siblings, 0 replies; 4+ messages in thread
From: Tom Rini @ 2021-10-12 16:21 UTC (permalink / raw)
To: Andre Przywara
Cc: Mingkai Hu, Rajesh Bhagat, Priyanka Jain, u-boot, Jagan Teki,
Samuel Holland, Chukun Pan, Arnaud Ferraris
[-- Attachment #1: Type: text/plain, Size: 2433 bytes --]
On Tue, Oct 12, 2021 at 05:15:55PM +0100, Andre Przywara wrote:
> On Tue, 12 Oct 2021 11:49:02 -0400
> Tom Rini <trini@konsulko.com> wrote:
>
> Hi Tom,
>
> > On Tue, Oct 12, 2021 at 01:58:18PM +0100, Andre Przywara wrote:
> >
> > > Hi Tom,
> > >
> > > please pull the sunxi/master branch, containing the first part of the
> > > 2022.01 changes.
> > >
> > > The bulk of it is Samuel's DM_I2C rework, which removes the nasty
> > > I2C deprecation warnings for most 32-bit boards. It also includes some
> > > smaller refactorings that pave the way for more changes, mostly driven
> > > by needing to support the Allwinner RISC-V SoC later on.
> > >
> > > Board wise we gain support for the FriendlyARM NanoPi R1S H5 router board
> > > and official Pinetab support.
> > >
> > > Build-tested for all 160 sunxi boards, and boot tested on a A64, A20, H3,
> > > H6, and H616 board. USB, SD card, eMMC, and Ethernet all work there
> > > (where applicable).
> > >
> > > Thanks,
> > > Andre
> > >
> > > ==============
> > > The following changes since commit f331497d3ad4166f9826e7674793ae04094b29c1:
> > >
> > > Merge tag 'video-20211009' of https://source.denx.de/u-boot/custodians/u-boot-video (2021-10-09 17:47:27 -0400)
> > >
> > > are available in the Git repository at:
> > >
> > > git://git.denx.de/u-boot-sunxi.git master
> > >
> > > for you to fetch changes up to f9437b00c06382d3edc623c10c69901786ad6317:
> > >
> > > sunxi: Enable DM_I2C for all sunxi boards (2021-10-12 11:01:27 +0100)
> > >
> >
> > Note that the POWER_MC34VR500 PMIC driver is NOT converted to DM, so I
> > had to move the Kconfig entry for that around in order to avoid a new
> > Kconfig warning when building.
>
> Oh, sorry for that! I just see that the commit message speaks of
> DM_PMIC_MC34708, but it's indeed POWER_MC34VR500 that (wrongfully) gains
> the dependency. For the next tests I will try to find some idle machine
> and build more boards than just sunxi!
> So thanks for the heads up and the quick fix!
Note that you should be able to enable CI runs in the custodian tree, if
they aren't enabled by default. That said, you'll only spot this type
of error if you check out the job output / summary as it's not a fatal
error. That said, if there's some way to make Kconfig errors like this
fatal, adding it to CI like we do for -Werror would be good :)
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-10-12 16:22 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-12 12:58 Pull request: u-boot-sunxi/master for v2022.01 Andre Przywara
2021-10-12 15:49 ` Tom Rini
2021-10-12 16:15 ` Andre Przywara
2021-10-12 16:21 ` Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.