[PATCH v3 00/17] Cleanup of LS1021a device trees

[PATCH v3 00/17] Cleanup of LS1021a device trees

[Li Yang]

This is a series of patches trying to cleanup the LS1021a based device
trees including:
- Add missing nodes
- Update to use SPDX tags
- Fix existing schema check issues in dts
- Update related bindings to deal with some check issues

Changes in V2
- Spin-off the IFC binding related patches into a separate series due to
  its dependency on driver changes
- Added two more fixes about thermal-zones node and flash compatible
- Remove copyright updates
- Updated description in i2c binding patch to clarify the intension
- Added Acked-by tag

Changes in V3
- Remove the flash label and num-cs
- Drop the i2c-imx binding change, instead update the DTS to remove
  clock-names and re-order DMA channels

Li Yang (17):
  dt-bindings: arm: fsl: add ls1021a-tsn board
  ARM: dts: ls1021a: remove clock-names property for i2c nodes
  ARM: dts: ls1021a: change dma channels order to match schema
  ARM: dts: ls1021a: change to use SPDX identifiers
  ARM: dts: ls1021a-qds: Add node for QSPI flash
  ARM: dts: ls1021a: update pcie nodes for dt-schema check
  ARM: dts: ls1021a: fix board compatible to follow binding schema
  ARM: dts: ls1021a: breakup long values in thermal node
  ARM: dts: ls1021a: disable ifc node by default
  ARM: dts: ls1021a: remove regulators simple-bus
  ARM: dts: ls1021a: fix memory node for schema check
  ARM: dts: ls1021a: add #dma-cells to qdma node
  ARM: dts: ls1021a: add #power-domain-cells for power-controller node
  ARM: dts: ls1021a-qds: change fpga to simple-mfd device
  ARM: dts: ls1021a-tsn: remove undocumented property "position" from
    mma8452 node
  ARM: dts: ls1021a: move thermal-zones node out of soc/
  ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for
    flash

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 arch/arm/boot/dts/ls1021a-qds.dts             |  85 ++-----
 arch/arm/boot/dts/ls1021a-tsn.dts             |   4 +-
 arch/arm/boot/dts/ls1021a-twr.dts             |  63 +----
 arch/arm/boot/dts/ls1021a.dtsi                | 219 +++++++-----------
 5 files changed, 123 insertions(+), 249 deletions(-)

-- 
2.25.1

[PATCH v3 00/17] Cleanup of LS1021a device trees

[Li Yang]

This is a series of patches trying to cleanup the LS1021a based device
trees including:
- Add missing nodes
- Update to use SPDX tags
- Fix existing schema check issues in dts
- Update related bindings to deal with some check issues

Changes in V2
- Spin-off the IFC binding related patches into a separate series due to
  its dependency on driver changes
- Added two more fixes about thermal-zones node and flash compatible
- Remove copyright updates
- Updated description in i2c binding patch to clarify the intension
- Added Acked-by tag

Changes in V3
- Remove the flash label and num-cs
- Drop the i2c-imx binding change, instead update the DTS to remove
  clock-names and re-order DMA channels

Li Yang (17):
  dt-bindings: arm: fsl: add ls1021a-tsn board
  ARM: dts: ls1021a: remove clock-names property for i2c nodes
  ARM: dts: ls1021a: change dma channels order to match schema
  ARM: dts: ls1021a: change to use SPDX identifiers
  ARM: dts: ls1021a-qds: Add node for QSPI flash
  ARM: dts: ls1021a: update pcie nodes for dt-schema check
  ARM: dts: ls1021a: fix board compatible to follow binding schema
  ARM: dts: ls1021a: breakup long values in thermal node
  ARM: dts: ls1021a: disable ifc node by default
  ARM: dts: ls1021a: remove regulators simple-bus
  ARM: dts: ls1021a: fix memory node for schema check
  ARM: dts: ls1021a: add #dma-cells to qdma node
  ARM: dts: ls1021a: add #power-domain-cells for power-controller node
  ARM: dts: ls1021a-qds: change fpga to simple-mfd device
  ARM: dts: ls1021a-tsn: remove undocumented property "position" from
    mma8452 node
  ARM: dts: ls1021a: move thermal-zones node out of soc/
  ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for
    flash

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 arch/arm/boot/dts/ls1021a-qds.dts             |  85 ++-----
 arch/arm/boot/dts/ls1021a-tsn.dts             |   4 +-
 arch/arm/boot/dts/ls1021a-twr.dts             |  63 +----
 arch/arm/boot/dts/ls1021a.dtsi                | 219 +++++++-----------
 5 files changed, 123 insertions(+), 249 deletions(-)

-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 01/17] dt-bindings: arm: fsl: add ls1021a-tsn board

[Li Yang]

Add the missing board in the binding docuemnt.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 60f4862ba15e..65299c0d1272 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -886,6 +886,7 @@ properties:
           - enum:
               - fsl,ls1021a-moxa-uc-8410a
               - fsl,ls1021a-qds
+              - fsl,ls1021a-tsn
               - fsl,ls1021a-twr
           - const: fsl,ls1021a
 
-- 
2.25.1

[PATCH v3 01/17] dt-bindings: arm: fsl: add ls1021a-tsn board

[Li Yang]

Add the missing board in the binding docuemnt.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 60f4862ba15e..65299c0d1272 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -886,6 +886,7 @@ properties:
           - enum:
               - fsl,ls1021a-moxa-uc-8410a
               - fsl,ls1021a-qds
+              - fsl,ls1021a-tsn
               - fsl,ls1021a-twr
           - const: fsl,ls1021a
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 02/17] ARM: dts: ls1021a: remove clock-names property for i2c nodes

[Li Yang]

The property is optional and not used in matching the clock in driver.
Remove it to avoid dtbs_check issues.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 4fce81422943..77f983b589fa 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -394,7 +394,6 @@ i2c0: i2c@2180000 {
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 39>, <&edma0 1 38>;
@@ -407,7 +406,6 @@ i2c1: i2c@2190000 {
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 37>, <&edma0 1 36>;
@@ -420,7 +418,6 @@ i2c2: i2c@21a0000 {
 			#size-cells = <0>;
 			reg = <0x0 0x21a0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 35>, <&edma0 1 34>;
-- 
2.25.1

[PATCH v3 02/17] ARM: dts: ls1021a: remove clock-names property for i2c nodes

[Li Yang]

The property is optional and not used in matching the clock in driver.
Remove it to avoid dtbs_check issues.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 4fce81422943..77f983b589fa 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -394,7 +394,6 @@ i2c0: i2c@2180000 {
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 39>, <&edma0 1 38>;
@@ -407,7 +406,6 @@ i2c1: i2c@2190000 {
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 37>, <&edma0 1 36>;
@@ -420,7 +418,6 @@ i2c2: i2c@21a0000 {
 			#size-cells = <0>;
 			reg = <0x0 0x21a0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 35>, <&edma0 1 34>;
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 03/17] ARM: dts: ls1021a: change dma channels order to match schema

[Li Yang]

Although the ordering of DMA channels was not relevant in the txt binding,
it is defined as ordered in the converted yaml schema.  Update the dts
to match the order.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 77f983b589fa..960de957f0b4 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -395,8 +395,8 @@ i2c0: i2c@2180000 {
 			reg = <0x0 0x2180000 0x0 0x10000>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 39>, <&edma0 1 38>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 38>, <&edma0 1 39>;
 			status = "disabled";
 		};
 
@@ -407,8 +407,8 @@ i2c1: i2c@2190000 {
 			reg = <0x0 0x2190000 0x0 0x10000>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 37>, <&edma0 1 36>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 36>, <&edma0 1 37>;
 			status = "disabled";
 		};
 
@@ -419,8 +419,8 @@ i2c2: i2c@21a0000 {
 			reg = <0x0 0x21a0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 35>, <&edma0 1 34>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 34>, <&edma0 1 35>;
 			status = "disabled";
 		};
 
-- 
2.25.1

[PATCH v3 03/17] ARM: dts: ls1021a: change dma channels order to match schema

[Li Yang]

Although the ordering of DMA channels was not relevant in the txt binding,
it is defined as ordered in the converted yaml schema.  Update the dts
to match the order.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 77f983b589fa..960de957f0b4 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -395,8 +395,8 @@ i2c0: i2c@2180000 {
 			reg = <0x0 0x2180000 0x0 0x10000>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 39>, <&edma0 1 38>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 38>, <&edma0 1 39>;
 			status = "disabled";
 		};
 
@@ -407,8 +407,8 @@ i2c1: i2c@2190000 {
 			reg = <0x0 0x2190000 0x0 0x10000>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 37>, <&edma0 1 36>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 36>, <&edma0 1 37>;
 			status = "disabled";
 		};
 
@@ -419,8 +419,8 @@ i2c2: i2c@21a0000 {
 			reg = <0x0 0x21a0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 35>, <&edma0 1 34>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 34>, <&edma0 1 35>;
 			status = "disabled";
 		};
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 04/17] ARM: dts: ls1021a: change to use SPDX identifiers

[Li Yang]

Replace the license text with SPDX identifiers.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a-qds.dts | 44 +------------------------------
 arch/arm/boot/dts/ls1021a-twr.dts | 44 +------------------------------
 arch/arm/boot/dts/ls1021a.dtsi    | 44 +------------------------------
 3 files changed, 3 insertions(+), 129 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 74a67604876c..e2aa569ff404 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -1,49 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
  * Copyright 2018 NXP
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index 5edf001f6138..e162a1599264 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -1,49 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
  * Copyright 2018 NXP
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 960de957f0b4..2f9ea0beac7a 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-- 
2.25.1

[PATCH v3 04/17] ARM: dts: ls1021a: change to use SPDX identifiers

[Li Yang]

Replace the license text with SPDX identifiers.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a-qds.dts | 44 +------------------------------
 arch/arm/boot/dts/ls1021a-twr.dts | 44 +------------------------------
 arch/arm/boot/dts/ls1021a.dtsi    | 44 +------------------------------
 3 files changed, 3 insertions(+), 129 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 74a67604876c..e2aa569ff404 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -1,49 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
  * Copyright 2018 NXP
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index 5edf001f6138..e162a1599264 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -1,49 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
  * Copyright 2018 NXP
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 960de957f0b4..2f9ea0beac7a 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 05/17] ARM: dts: ls1021a-qds: Add node for QSPI flash

[Li Yang]

Add the missing node for qspi flash.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
---
 arch/arm/boot/dts/ls1021a-qds.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index e2aa569ff404..8982ba2c14c2 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -286,6 +286,20 @@ tbi0: tbi-phy@8 {
 	};
 };
 
+&qspi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
 &sai2 {
 	status = "okay";
 };
-- 
2.25.1

[PATCH v3 05/17] ARM: dts: ls1021a-qds: Add node for QSPI flash

[Li Yang]

Add the missing node for qspi flash.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
---
 arch/arm/boot/dts/ls1021a-qds.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index e2aa569ff404..8982ba2c14c2 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -286,6 +286,20 @@ tbi0: tbi-phy@8 {
 	};
 };
 
+&qspi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
 &sai2 {
 	status = "okay";
 };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 06/17] ARM: dts: ls1021a: update pcie nodes for dt-schema check

[Li Yang]

Break up long values to pass dt-schema checks.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 2f9ea0beac7a..fa4adfdf4abd 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -839,8 +839,8 @@ usb3: usb@3100000 {
 
 		pcie@3400000 {
 			compatible = "fsl,ls1021a-pcie";
-			reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
-			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg = <0x00 0x03400000 0x0 0x00010000>, /* controller registers */
+			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
 			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
 			fsl,pcie-scfg = <&scfg 0>;
@@ -849,8 +849,8 @@ pcie@3400000 {
 			device_type = "pci";
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
-			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
-				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 			msi-parent = <&msi1>, <&msi2>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
@@ -863,8 +863,8 @@ pcie@3400000 {
 
 		pcie@3500000 {
 			compatible = "fsl,ls1021a-pcie";
-			reg = <0x00 0x03500000 0x0 0x00010000   /* controller registers */
-			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg = <0x00 0x03500000 0x0 0x00010000>, /* controller registers */
+			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
 			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,pcie-scfg = <&scfg 1>;
@@ -873,8 +873,8 @@ pcie@3500000 {
 			device_type = "pci";
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
-			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
-				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 			msi-parent = <&msi1>, <&msi2>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
-- 
2.25.1

[PATCH v3 06/17] ARM: dts: ls1021a: update pcie nodes for dt-schema check

[Li Yang]

Break up long values to pass dt-schema checks.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 2f9ea0beac7a..fa4adfdf4abd 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -839,8 +839,8 @@ usb3: usb@3100000 {
 
 		pcie@3400000 {
 			compatible = "fsl,ls1021a-pcie";
-			reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
-			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg = <0x00 0x03400000 0x0 0x00010000>, /* controller registers */
+			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
 			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
 			fsl,pcie-scfg = <&scfg 0>;
@@ -849,8 +849,8 @@ pcie@3400000 {
 			device_type = "pci";
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
-			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
-				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 			msi-parent = <&msi1>, <&msi2>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
@@ -863,8 +863,8 @@ pcie@3400000 {
 
 		pcie@3500000 {
 			compatible = "fsl,ls1021a-pcie";
-			reg = <0x00 0x03500000 0x0 0x00010000   /* controller registers */
-			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg = <0x00 0x03500000 0x0 0x00010000>, /* controller registers */
+			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
 			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,pcie-scfg = <&scfg 1>;
@@ -873,8 +873,8 @@ pcie@3500000 {
 			device_type = "pci";
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
-			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
-				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 			msi-parent = <&msi1>, <&msi2>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 07/17] ARM: dts: ls1021a: fix board compatible to follow binding schema

[Li Yang]

Align the compatible strings with the board binding defined in schema
file.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a-tsn.dts | 1 +
 arch/arm/boot/dts/ls1021a.dtsi    | 1 -
 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts
index 9d8f0c2a8aba..ce470ebfb2c0 100644
--- a/arch/arm/boot/dts/ls1021a-tsn.dts
+++ b/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -8,6 +8,7 @@
 
 / {
 	model = "NXP LS1021A-TSN Board";
+	compatible = "fsl,ls1021a-tsn", "fsl,ls1021a";
 
 	sys_mclk: clock-mclk {
 		compatible = "fixed-clock";
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index fa4adfdf4abd..3f1cd7e55091 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -9,7 +9,6 @@
 / {
 	#address-cells = <2>;
 	#size-cells = <2>;
-	compatible = "fsl,ls1021a";
 	interrupt-parent = <&gic>;
 
 	aliases {
-- 
2.25.1

[PATCH v3 07/17] ARM: dts: ls1021a: fix board compatible to follow binding schema

[Li Yang]

Align the compatible strings with the board binding defined in schema
file.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a-tsn.dts | 1 +
 arch/arm/boot/dts/ls1021a.dtsi    | 1 -
 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts
index 9d8f0c2a8aba..ce470ebfb2c0 100644
--- a/arch/arm/boot/dts/ls1021a-tsn.dts
+++ b/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -8,6 +8,7 @@
 
 / {
 	model = "NXP LS1021A-TSN Board";
+	compatible = "fsl,ls1021a-tsn", "fsl,ls1021a";
 
 	sys_mclk: clock-mclk {
 		compatible = "fixed-clock";
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index fa4adfdf4abd..3f1cd7e55091 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -9,7 +9,6 @@
 / {
 	#address-cells = <2>;
 	#size-cells = <2>;
-	compatible = "fsl,ls1021a";
 	interrupt-parent = <&gic>;
 
 	aliases {
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 08/17] ARM: dts: ls1021a: breakup long values in thermal node

[Li Yang]

Breakup long values to pass the schema check.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 72 +++++++++++++++++-----------------
 1 file changed, 36 insertions(+), 36 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 3f1cd7e55091..4a7d06a14946 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -247,42 +247,42 @@ tmu: tmu@1f00000 {
 			reg = <0x0 0x1f00000 0x0 0x10000>;
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>;
-			fsl,tmu-calibration = <0x00000000 0x00000020
-					       0x00000001 0x00000024
-					       0x00000002 0x0000002a
-					       0x00000003 0x00000032
-					       0x00000004 0x00000038
-					       0x00000005 0x0000003e
-					       0x00000006 0x00000043
-					       0x00000007 0x0000004a
-					       0x00000008 0x00000050
-					       0x00000009 0x00000059
-					       0x0000000a 0x0000005f
-					       0x0000000b 0x00000066
-
-					       0x00010000 0x00000023
-					       0x00010001 0x0000002b
-					       0x00010002 0x00000033
-					       0x00010003 0x0000003a
-					       0x00010004 0x00000042
-					       0x00010005 0x0000004a
-					       0x00010006 0x00000054
-					       0x00010007 0x0000005c
-					       0x00010008 0x00000065
-					       0x00010009 0x0000006f
-
-					       0x00020000 0x00000029
-					       0x00020001 0x00000033
-					       0x00020002 0x0000003d
-					       0x00020003 0x00000048
-					       0x00020004 0x00000054
-					       0x00020005 0x00000060
-					       0x00020006 0x0000006c
-
-					       0x00030000 0x00000025
-					       0x00030001 0x00000033
-					       0x00030002 0x00000043
-					       0x00030003 0x00000055>;
+			fsl,tmu-calibration = <0x00000000 0x00000020>,
+					      <0x00000001 0x00000024>,
+					      <0x00000002 0x0000002a>,
+					      <0x00000003 0x00000032>,
+					      <0x00000004 0x00000038>,
+					      <0x00000005 0x0000003e>,
+					      <0x00000006 0x00000043>,
+					      <0x00000007 0x0000004a>,
+					      <0x00000008 0x00000050>,
+					      <0x00000009 0x00000059>,
+					      <0x0000000a 0x0000005f>,
+					      <0x0000000b 0x00000066>,
+
+					      <0x00010000 0x00000023>,
+					      <0x00010001 0x0000002b>,
+					      <0x00010002 0x00000033>,
+					      <0x00010003 0x0000003a>,
+					      <0x00010004 0x00000042>,
+					      <0x00010005 0x0000004a>,
+					      <0x00010006 0x00000054>,
+					      <0x00010007 0x0000005c>,
+					      <0x00010008 0x00000065>,
+					      <0x00010009 0x0000006f>,
+
+					      <0x00020000 0x00000029>,
+					      <0x00020001 0x00000033>,
+					      <0x00020002 0x0000003d>,
+					      <0x00020003 0x00000048>,
+					      <0x00020004 0x00000054>,
+					      <0x00020005 0x00000060>,
+					      <0x00020006 0x0000006c>,
+
+					      <0x00030000 0x00000025>,
+					      <0x00030001 0x00000033>,
+					      <0x00030002 0x00000043>,
+					      <0x00030003 0x00000055>;
 			#thermal-sensor-cells = <1>;
 		};
 
-- 
2.25.1

[PATCH v3 08/17] ARM: dts: ls1021a: breakup long values in thermal node

[Li Yang]

Breakup long values to pass the schema check.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 72 +++++++++++++++++-----------------
 1 file changed, 36 insertions(+), 36 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 3f1cd7e55091..4a7d06a14946 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -247,42 +247,42 @@ tmu: tmu@1f00000 {
 			reg = <0x0 0x1f00000 0x0 0x10000>;
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>;
-			fsl,tmu-calibration = <0x00000000 0x00000020
-					       0x00000001 0x00000024
-					       0x00000002 0x0000002a
-					       0x00000003 0x00000032
-					       0x00000004 0x00000038
-					       0x00000005 0x0000003e
-					       0x00000006 0x00000043
-					       0x00000007 0x0000004a
-					       0x00000008 0x00000050
-					       0x00000009 0x00000059
-					       0x0000000a 0x0000005f
-					       0x0000000b 0x00000066
-
-					       0x00010000 0x00000023
-					       0x00010001 0x0000002b
-					       0x00010002 0x00000033
-					       0x00010003 0x0000003a
-					       0x00010004 0x00000042
-					       0x00010005 0x0000004a
-					       0x00010006 0x00000054
-					       0x00010007 0x0000005c
-					       0x00010008 0x00000065
-					       0x00010009 0x0000006f
-
-					       0x00020000 0x00000029
-					       0x00020001 0x00000033
-					       0x00020002 0x0000003d
-					       0x00020003 0x00000048
-					       0x00020004 0x00000054
-					       0x00020005 0x00000060
-					       0x00020006 0x0000006c
-
-					       0x00030000 0x00000025
-					       0x00030001 0x00000033
-					       0x00030002 0x00000043
-					       0x00030003 0x00000055>;
+			fsl,tmu-calibration = <0x00000000 0x00000020>,
+					      <0x00000001 0x00000024>,
+					      <0x00000002 0x0000002a>,
+					      <0x00000003 0x00000032>,
+					      <0x00000004 0x00000038>,
+					      <0x00000005 0x0000003e>,
+					      <0x00000006 0x00000043>,
+					      <0x00000007 0x0000004a>,
+					      <0x00000008 0x00000050>,
+					      <0x00000009 0x00000059>,
+					      <0x0000000a 0x0000005f>,
+					      <0x0000000b 0x00000066>,
+
+					      <0x00010000 0x00000023>,
+					      <0x00010001 0x0000002b>,
+					      <0x00010002 0x00000033>,
+					      <0x00010003 0x0000003a>,
+					      <0x00010004 0x00000042>,
+					      <0x00010005 0x0000004a>,
+					      <0x00010006 0x00000054>,
+					      <0x00010007 0x0000005c>,
+					      <0x00010008 0x00000065>,
+					      <0x00010009 0x0000006f>,
+
+					      <0x00020000 0x00000029>,
+					      <0x00020001 0x00000033>,
+					      <0x00020002 0x0000003d>,
+					      <0x00020003 0x00000048>,
+					      <0x00020004 0x00000054>,
+					      <0x00020005 0x00000060>,
+					      <0x00020006 0x0000006c>,
+
+					      <0x00030000 0x00000025>,
+					      <0x00030001 0x00000033>,
+					      <0x00030002 0x00000043>,
+					      <0x00030003 0x00000055>;
 			#thermal-sensor-cells = <1>;
 		};
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 09/17] ARM: dts: ls1021a: disable ifc node by default

[Li Yang]

Disable the bus in the SoC dtsi file to be enabled only in board dts
files. Also breakup long values in the ifc node to fix dtbs_check.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a-qds.dts | 6 +++---
 arch/arm/boot/dts/ls1021a.dtsi    | 1 +
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 8982ba2c14c2..6db6604e7a18 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -189,9 +189,9 @@ &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	/* NOR, NAND Flashes and FPGA on board */
-	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
-		  0x2 0x0 0x0 0x7e800000 0x00010000
-		  0x3 0x0 0x0 0x7fb00000 0x00000100>;
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>,
+		 <0x2 0x0 0x0 0x7e800000 0x00010000>,
+		 <0x3 0x0 0x0 0x7fb00000 0x00000100>;
 	status = "okay";
 
 	nor@0,0 {
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 4a7d06a14946..e6677721263b 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -126,6 +126,7 @@ ifc: ifc@1530000 {
 			compatible = "fsl,ifc", "simple-bus";
 			reg = <0x0 0x1530000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
 		};
 
 		dcfg: dcfg@1ee0000 {
-- 
2.25.1

[PATCH v3 09/17] ARM: dts: ls1021a: disable ifc node by default

[Li Yang]

Disable the bus in the SoC dtsi file to be enabled only in board dts
files. Also breakup long values in the ifc node to fix dtbs_check.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a-qds.dts | 6 +++---
 arch/arm/boot/dts/ls1021a.dtsi    | 1 +
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 8982ba2c14c2..6db6604e7a18 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -189,9 +189,9 @@ &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	/* NOR, NAND Flashes and FPGA on board */
-	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
-		  0x2 0x0 0x0 0x7e800000 0x00010000
-		  0x3 0x0 0x0 0x7fb00000 0x00000100>;
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>,
+		 <0x2 0x0 0x0 0x7e800000 0x00010000>,
+		 <0x3 0x0 0x0 0x7fb00000 0x00000100>;
 	status = "okay";
 
 	nor@0,0 {
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 4a7d06a14946..e6677721263b 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -126,6 +126,7 @@ ifc: ifc@1530000 {
 			compatible = "fsl,ifc", "simple-bus";
 			reg = <0x0 0x1530000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
 		};
 
 		dcfg: dcfg@1ee0000 {
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 10/17] ARM: dts: ls1021a: remove regulators simple-bus

[Li Yang]

There is no regulator bus in hardware.  So move the regulator nodes out
and remove the regulators simple-bus.  This also make the dts align with
the simple-bus schema.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a-qds.dts | 19 ++++++-------------
 arch/arm/boot/dts/ls1021a-twr.dts | 19 ++++++-------------
 2 files changed, 12 insertions(+), 26 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 6db6604e7a18..6e469b46229f 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -25,19 +25,12 @@ sys_mclk: clock-mclk {
 		clock-frequency = <24576000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index e162a1599264..f5c03871b205 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -23,19 +23,12 @@ sys_mclk: clock-mclk {
 		clock-frequency = <24576000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	sound {
-- 
2.25.1

[PATCH v3 10/17] ARM: dts: ls1021a: remove regulators simple-bus

[Li Yang]

There is no regulator bus in hardware.  So move the regulator nodes out
and remove the regulators simple-bus.  This also make the dts align with
the simple-bus schema.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a-qds.dts | 19 ++++++-------------
 arch/arm/boot/dts/ls1021a-twr.dts | 19 ++++++-------------
 2 files changed, 12 insertions(+), 26 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 6db6604e7a18..6e469b46229f 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -25,19 +25,12 @@ sys_mclk: clock-mclk {
 		clock-frequency = <24576000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index e162a1599264..f5c03871b205 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -23,19 +23,12 @@ sys_mclk: clock-mclk {
 		clock-frequency = <24576000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	sound {
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 11/17] ARM: dts: ls1021a: fix memory node for schema check

[Li Yang]

Fix the following error from "make dtbs_check"

memory: False schema does not allow ...

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index e6677721263b..76c181602399 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -47,7 +47,7 @@ cpu1: cpu@f01 {
 		};
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x0>;
 	};
-- 
2.25.1

[PATCH v3 11/17] ARM: dts: ls1021a: fix memory node for schema check

[Li Yang]

Fix the following error from "make dtbs_check"

memory: False schema does not allow ...

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index e6677721263b..76c181602399 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -47,7 +47,7 @@ cpu1: cpu@f01 {
 		};
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x0>;
 	};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 12/17] ARM: dts: ls1021a: add #dma-cells to qdma node

[Li Yang]

Add the #dma-cells to align with the dma schema.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 76c181602399..bf583a0cc237 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -947,6 +947,7 @@ qdma: dma-controller@8390000 {
 				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "qdma-error",
 				"qdma-queue0", "qdma-queue1";
+			#dma-cells = <2>;
 			dma-channels = <8>;
 			block-number = <1>;
 			block-offset = <0x1000>;
-- 
2.25.1

[PATCH v3 12/17] ARM: dts: ls1021a: add #dma-cells to qdma node

[Li Yang]

Add the #dma-cells to align with the dma schema.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 76c181602399..bf583a0cc237 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -947,6 +947,7 @@ qdma: dma-controller@8390000 {
 				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "qdma-error",
 				"qdma-queue0", "qdma-queue1";
+			#dma-cells = <2>;
 			dma-channels = <8>;
 			block-number = <1>;
 			block-offset = <0x1000>;
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 13/17] ARM: dts: ls1021a: add #power-domain-cells for power-controller node

[Li Yang]

Add the #power-domain-cells for power-controller node as required by the
schema.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index bf583a0cc237..cc7445e47641 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -961,6 +961,7 @@ rcpm: power-controller@1ee2140 {
 			compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1ee2140 0x0 0x8>;
 			#fsl,rcpm-wakeup-cells = <2>;
+			#power-domain-cells = <0>;
 		};
 
 		ftm_alarm0: timer0@29d0000 {
-- 
2.25.1

[PATCH v3 13/17] ARM: dts: ls1021a: add #power-domain-cells for power-controller node

[Li Yang]

Add the #power-domain-cells for power-controller node as required by the
schema.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index bf583a0cc237..cc7445e47641 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -961,6 +961,7 @@ rcpm: power-controller@1ee2140 {
 			compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1ee2140 0x0 0x8>;
 			#fsl,rcpm-wakeup-cells = <2>;
+			#power-domain-cells = <0>;
 		};
 
 		ftm_alarm0: timer0@29d0000 {
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 14/17] ARM: dts: ls1021a-qds: change fpga to simple-mfd device

[Li Yang]

The FPGA is not really a bus but more like an MFD device.  Change the
compatible string from "simple-bus" to "simple-mfd".  This also fix a
node name issue with simple-bus schema.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a-qds.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 6e469b46229f..f1acb97aee69 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -205,7 +205,7 @@ nand@2,0 {
 	fpga: board-control@3,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "simple-bus";
+		compatible = "simple-mfd";
 		reg = <0x3 0x0 0x0000100>;
 		bank-width = <1>;
 		device-width = <1>;
-- 
2.25.1

[PATCH v3 14/17] ARM: dts: ls1021a-qds: change fpga to simple-mfd device

[Li Yang]

The FPGA is not really a bus but more like an MFD device.  Change the
compatible string from "simple-bus" to "simple-mfd".  This also fix a
node name issue with simple-bus schema.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a-qds.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 6e469b46229f..f1acb97aee69 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -205,7 +205,7 @@ nand@2,0 {
 	fpga: board-control@3,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "simple-bus";
+		compatible = "simple-mfd";
 		reg = <0x3 0x0 0x0000100>;
 		bank-width = <1>;
 		device-width = <1>;
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 15/17] ARM: dts: ls1021a-tsn: remove undocumented property "position" from mma8452 node

[Li Yang]

Property "postion" is not documented in the mma8452 binding.  Remove it
to resolve the error in "make dtbs_check"

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a-tsn.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts
index ce470ebfb2c0..8005efc5c812 100644
--- a/arch/arm/boot/dts/ls1021a-tsn.dts
+++ b/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -137,7 +137,6 @@ &i2c0 {
 	/* 3 axis accelerometer */
 	accelerometer@1e {
 		compatible = "fsl,fxls8471";
-		position = <0>;
 		reg = <0x1e>;
 	};
 
-- 
2.25.1

[PATCH v3 15/17] ARM: dts: ls1021a-tsn: remove undocumented property "position" from mma8452 node

[Li Yang]

Property "postion" is not documented in the mma8452 binding.  Remove it
to resolve the error in "make dtbs_check"

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a-tsn.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts
index ce470ebfb2c0..8005efc5c812 100644
--- a/arch/arm/boot/dts/ls1021a-tsn.dts
+++ b/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -137,7 +137,6 @@ &i2c0 {
 	/* 3 axis accelerometer */
 	accelerometer@1e {
 		compatible = "fsl,fxls8471";
-		position = <0>;
 		reg = <0x1e>;
 	};
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 16/17] ARM: dts: ls1021a: move thermal-zones node out of soc/

[Li Yang]

This fixes dtbs-check error from simple-bus schema:
soc: thermal-zones: {'type': 'object'} is not allowed for {'cpu-thermal': ..... }
        From schema: /home/leo/.local/lib/python3.8/site-packages/dtschema/schemas/simple-bus.yaml

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 66 +++++++++++++++++-----------------
 1 file changed, 33 insertions(+), 33 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index cc7445e47641..2e69d6eab4d1 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -287,39 +287,6 @@ tmu: tmu@1f00000 {
 			#thermal-sensor-cells = <1>;
 		};
 
-		thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay-passive = <1000>;
-				polling-delay = <5000>;
-
-				thermal-sensors = <&tmu 0>;
-
-				trips {
-					cpu_alert: cpu-alert {
-						temperature = <85000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-					cpu_crit: cpu-crit {
-						temperature = <95000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map0 {
-						trip = <&cpu_alert>;
-						cooling-device =
-							<&cpu0 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-							<&cpu1 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-					};
-				};
-			};
-		};
-
 		dspi0: spi@2100000 {
 			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
@@ -973,4 +940,37 @@ ftm_alarm0: timer0@29d0000 {
 			big-endian;
 		};
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
-- 
2.25.1

[PATCH v3 16/17] ARM: dts: ls1021a: move thermal-zones node out of soc/

[Li Yang]

This fixes dtbs-check error from simple-bus schema:
soc: thermal-zones: {'type': 'object'} is not allowed for {'cpu-thermal': ..... }
        From schema: /home/leo/.local/lib/python3.8/site-packages/dtschema/schemas/simple-bus.yaml

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 66 +++++++++++++++++-----------------
 1 file changed, 33 insertions(+), 33 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index cc7445e47641..2e69d6eab4d1 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -287,39 +287,6 @@ tmu: tmu@1f00000 {
 			#thermal-sensor-cells = <1>;
 		};
 
-		thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay-passive = <1000>;
-				polling-delay = <5000>;
-
-				thermal-sensors = <&tmu 0>;
-
-				trips {
-					cpu_alert: cpu-alert {
-						temperature = <85000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-					cpu_crit: cpu-crit {
-						temperature = <95000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map0 {
-						trip = <&cpu_alert>;
-						cooling-device =
-							<&cpu0 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-							<&cpu1 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-					};
-				};
-			};
-		};
-
 		dspi0: spi@2100000 {
 			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
@@ -973,4 +940,37 @@ ftm_alarm0: timer0@29d0000 {
 			big-endian;
 		};
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 17/17] ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash

[Li Yang]

We cannot list all the possible chips used in different board revisions,
just use the generic "jedec,spi-nor" compatible instead.  This also
fixes dtbs_check error:
['jedec,spi-nor', 's25fl256s1', 's25fl512s'] is too long

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
---
 arch/arm/boot/dts/ls1021a-tsn.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts
index 8005efc5c812..ff0ffb22768b 100644
--- a/arch/arm/boot/dts/ls1021a-tsn.dts
+++ b/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -251,7 +251,7 @@ &qspi {
 
 	flash@0 {
 		/* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
-		compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s";
+		compatible = "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-- 
2.25.1

[PATCH v3 17/17] ARM: dts: ls1021a-tsn: use generic "jedec, spi-nor" compatible for flash

[Li Yang]

We cannot list all the possible chips used in different board revisions,
just use the generic "jedec,spi-nor" compatible instead.  This also
fixes dtbs_check error:
['jedec,spi-nor', 's25fl256s1', 's25fl512s'] is too long

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
---
 arch/arm/boot/dts/ls1021a-tsn.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts
index 8005efc5c812..ff0ffb22768b 100644
--- a/arch/arm/boot/dts/ls1021a-tsn.dts
+++ b/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -251,7 +251,7 @@ &qspi {
 
 	flash@0 {
 		/* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
-		compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s";
+		compatible = "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 00/17] Cleanup of LS1021a device trees

[Shawn Guo]

On Tue, Oct 12, 2021 at 06:58:06PM -0500, Li Yang wrote:
> This is a series of patches trying to cleanup the LS1021a based device
> trees including:
> - Add missing nodes
> - Update to use SPDX tags
> - Fix existing schema check issues in dts
> - Update related bindings to deal with some check issues
> 
> Changes in V2
> - Spin-off the IFC binding related patches into a separate series due to
>   its dependency on driver changes
> - Added two more fixes about thermal-zones node and flash compatible
> - Remove copyright updates
> - Updated description in i2c binding patch to clarify the intension
> - Added Acked-by tag
> 
> Changes in V3
> - Remove the flash label and num-cs
> - Drop the i2c-imx binding change, instead update the DTS to remove
>   clock-names and re-order DMA channels
> 
> Li Yang (17):
>   dt-bindings: arm: fsl: add ls1021a-tsn board
>   ARM: dts: ls1021a: remove clock-names property for i2c nodes
>   ARM: dts: ls1021a: change dma channels order to match schema
>   ARM: dts: ls1021a: change to use SPDX identifiers
>   ARM: dts: ls1021a-qds: Add node for QSPI flash
>   ARM: dts: ls1021a: update pcie nodes for dt-schema check
>   ARM: dts: ls1021a: fix board compatible to follow binding schema
>   ARM: dts: ls1021a: breakup long values in thermal node
>   ARM: dts: ls1021a: disable ifc node by default
>   ARM: dts: ls1021a: remove regulators simple-bus
>   ARM: dts: ls1021a: fix memory node for schema check
>   ARM: dts: ls1021a: add #dma-cells to qdma node
>   ARM: dts: ls1021a: add #power-domain-cells for power-controller node
>   ARM: dts: ls1021a-qds: change fpga to simple-mfd device
>   ARM: dts: ls1021a-tsn: remove undocumented property "position" from
>     mma8452 node
>   ARM: dts: ls1021a: move thermal-zones node out of soc/
>   ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for
>     flash

Applied all, thanks!

Re: [PATCH v3 00/17] Cleanup of LS1021a device trees

[Shawn Guo]

On Tue, Oct 12, 2021 at 06:58:06PM -0500, Li Yang wrote:
> This is a series of patches trying to cleanup the LS1021a based device
> trees including:
> - Add missing nodes
> - Update to use SPDX tags
> - Fix existing schema check issues in dts
> - Update related bindings to deal with some check issues
> 
> Changes in V2
> - Spin-off the IFC binding related patches into a separate series due to
>   its dependency on driver changes
> - Added two more fixes about thermal-zones node and flash compatible
> - Remove copyright updates
> - Updated description in i2c binding patch to clarify the intension
> - Added Acked-by tag
> 
> Changes in V3
> - Remove the flash label and num-cs
> - Drop the i2c-imx binding change, instead update the DTS to remove
>   clock-names and re-order DMA channels
> 
> Li Yang (17):
>   dt-bindings: arm: fsl: add ls1021a-tsn board
>   ARM: dts: ls1021a: remove clock-names property for i2c nodes
>   ARM: dts: ls1021a: change dma channels order to match schema
>   ARM: dts: ls1021a: change to use SPDX identifiers
>   ARM: dts: ls1021a-qds: Add node for QSPI flash
>   ARM: dts: ls1021a: update pcie nodes for dt-schema check
>   ARM: dts: ls1021a: fix board compatible to follow binding schema
>   ARM: dts: ls1021a: breakup long values in thermal node
>   ARM: dts: ls1021a: disable ifc node by default
>   ARM: dts: ls1021a: remove regulators simple-bus
>   ARM: dts: ls1021a: fix memory node for schema check
>   ARM: dts: ls1021a: add #dma-cells to qdma node
>   ARM: dts: ls1021a: add #power-domain-cells for power-controller node
>   ARM: dts: ls1021a-qds: change fpga to simple-mfd device
>   ARM: dts: ls1021a-tsn: remove undocumented property "position" from
>     mma8452 node
>   ARM: dts: ls1021a: move thermal-zones node out of soc/
>   ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for
>     flash

Applied all, thanks!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel