* [PATCH v7 0/4] Mediatek MT7986 pinctrl support
@ 2021-10-14 7:58 ` Sam Shih
0 siblings, 0 replies; 21+ messages in thread
From: Sam Shih @ 2021-10-14 7:58 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Matthias Brugger, Sean Wang,
linux-gpio, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel
Cc: John Crispin, Ryder Lee, Sam Shih
This patch series add pinctrl support for mediatek mt7986 SoC series.
It is based on patch series "Add basic SoC support for mediatek mt7986":
https://lore.kernel.org/all/20211014074403.17346-1-sam.shih@mediatek.com/
---
v7 : separate pinctrl part into a single patch series
According to the maintainer’s suggestion, this patch splits the previous
thread into independent patch series.
This patch include clock driver and device tree update
Original thread:
https://lore.kernel.org/all/20210914085137.31761-1-sam.shih@mediatek.com/
---
Sam Shih (4):
dt-bindings: pinctrl: update bindings for MT7986 SoC
pinctrl: mediatek: add support for MT7986 SoC
arm64: dts: mediatek: add pinctrl support for mt7986a
arm64: dts: mediatek: add pinctrl support for mt7986b
.../pinctrl/mediatek,mt7986-pinctrl.yaml | 363 +++++++
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 20 +
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 21 +
arch/arm64/boot/dts/mediatek/mt7986b.dtsi | 21 +
drivers/pinctrl/mediatek/Kconfig | 7 +
drivers/pinctrl/mediatek/Makefile | 1 +
drivers/pinctrl/mediatek/pinctrl-mt7986.c | 927 ++++++++++++++++++
7 files changed, 1360 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7986.c
--
2.29.2
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v7 0/4] Mediatek MT7986 pinctrl support
@ 2021-10-14 7:58 ` Sam Shih
0 siblings, 0 replies; 21+ messages in thread
From: Sam Shih @ 2021-10-14 7:58 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Matthias Brugger, Sean Wang,
linux-gpio, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel
Cc: John Crispin, Ryder Lee, Sam Shih
This patch series add pinctrl support for mediatek mt7986 SoC series.
It is based on patch series "Add basic SoC support for mediatek mt7986":
https://lore.kernel.org/all/20211014074403.17346-1-sam.shih@mediatek.com/
---
v7 : separate pinctrl part into a single patch series
According to the maintainer’s suggestion, this patch splits the previous
thread into independent patch series.
This patch include clock driver and device tree update
Original thread:
https://lore.kernel.org/all/20210914085137.31761-1-sam.shih@mediatek.com/
---
Sam Shih (4):
dt-bindings: pinctrl: update bindings for MT7986 SoC
pinctrl: mediatek: add support for MT7986 SoC
arm64: dts: mediatek: add pinctrl support for mt7986a
arm64: dts: mediatek: add pinctrl support for mt7986b
.../pinctrl/mediatek,mt7986-pinctrl.yaml | 363 +++++++
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 20 +
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 21 +
arch/arm64/boot/dts/mediatek/mt7986b.dtsi | 21 +
drivers/pinctrl/mediatek/Kconfig | 7 +
drivers/pinctrl/mediatek/Makefile | 1 +
drivers/pinctrl/mediatek/pinctrl-mt7986.c | 927 ++++++++++++++++++
7 files changed, 1360 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7986.c
--
2.29.2
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v7 0/4] Mediatek MT7986 pinctrl support
@ 2021-10-14 7:58 ` Sam Shih
0 siblings, 0 replies; 21+ messages in thread
From: Sam Shih @ 2021-10-14 7:58 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Matthias Brugger, Sean Wang,
linux-gpio, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel
Cc: John Crispin, Ryder Lee, Sam Shih
This patch series add pinctrl support for mediatek mt7986 SoC series.
It is based on patch series "Add basic SoC support for mediatek mt7986":
https://lore.kernel.org/all/20211014074403.17346-1-sam.shih@mediatek.com/
---
v7 : separate pinctrl part into a single patch series
According to the maintainer’s suggestion, this patch splits the previous
thread into independent patch series.
This patch include clock driver and device tree update
Original thread:
https://lore.kernel.org/all/20210914085137.31761-1-sam.shih@mediatek.com/
---
Sam Shih (4):
dt-bindings: pinctrl: update bindings for MT7986 SoC
pinctrl: mediatek: add support for MT7986 SoC
arm64: dts: mediatek: add pinctrl support for mt7986a
arm64: dts: mediatek: add pinctrl support for mt7986b
.../pinctrl/mediatek,mt7986-pinctrl.yaml | 363 +++++++
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 20 +
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 21 +
arch/arm64/boot/dts/mediatek/mt7986b.dtsi | 21 +
drivers/pinctrl/mediatek/Kconfig | 7 +
drivers/pinctrl/mediatek/Makefile | 1 +
drivers/pinctrl/mediatek/pinctrl-mt7986.c | 927 ++++++++++++++++++
7 files changed, 1360 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7986.c
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v7 1/4] dt-bindings: pinctrl: update bindings for MT7986 SoC
2021-10-14 7:58 ` Sam Shih
(?)
@ 2021-10-14 7:58 ` Sam Shih
-1 siblings, 0 replies; 21+ messages in thread
From: Sam Shih @ 2021-10-14 7:58 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Matthias Brugger, Sean Wang,
linux-gpio, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel
Cc: John Crispin, Ryder Lee, Sam Shih
This updates bindings for MT7986 pinctrl driver. The
difference of pinctrl between mt7986a and mt7986b is that pin-41 to
pin-65 do not exist on mt7986b
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
v7 : updated pinctcl node binding description, and separate pinctrl
part into a single patch series
Original thread:
https://lore.kernel.org/all/8348ed3e-c561-ad7e-fe9e-a31ed346d8d0@gmail.com/
v6 : fixed yamllint warnings/errors v2
v5 : fixed yamllint warnings/errors v1
v4 : used yaml format instead of txt format document
v3 : make mt7986 pinctrl bindings as a separate file
v2 : deleted the redundant description of mt7986a/mt7986b
---
.../pinctrl/mediatek,mt7986-pinctrl.yaml | 364 ++++++++++++++++++
1 file changed, 364 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
new file mode 100644
index 000000000000..79ab95dcb272
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
@@ -0,0 +1,363 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7986-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT7986 Pin Controller Device Tree Bindings
+
+maintainers:
+ - Sean Wang <sean.wang@kernel.org>
+
+description: |+
+ The MediaTek's MT7986 Pin controller is used to control SoC pins.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt7986a-pinctrl
+ - mediatek,mt7986b-pinctrl
+
+ reg:
+ minItems: 8
+ maxItems: 8
+
+ reg-names:
+ items:
+ - const: gpio
+ - const: iocfg_rt
+ - const: iocfg_rb
+ - const: iocfg_lt
+ - const: iocfg_lb
+ - const: iocfg_tr
+ - const: iocfg_tl
+ - const: eint
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description: |
+ Number of cells in GPIO specifier. Since the generic GPIO
+ binding is used, the amount of cells must be specified as 2. See the below
+ mentioned gpio binding representation for description of particular cells.
+
+ gpio-ranges:
+ minItems: 1
+ maxItems: 5
+ description: |
+ GPIO valid number range.
+
+ interrupt-controller: true
+
+ interrupts:
+ maxItems: 1
+
+ "#interrupt-cells":
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - gpio-controller
+ - "#gpio-cells"
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '.*mux.*':
+ type: object
+ additionalProperties: false
+ description: |
+ pinmux configuration nodes.
+
+ The following table shows the effective values of "group", "function"
+ properties and chip pinout pins
+
+ groups function pins (in pin#)
+ ---------------------------------------------------------------------
+ "watchdog" "watchdog" 0
+ "wifi_led" "led" 1, 2
+ "i2c" "i2c" 3, 4
+ "uart1_0" "uart" 7, 8, 9, 10
+ "pcie_clk" "pcie" 9
+ "pcie_wake" "pcie" 10
+ "spi1_0" "spi" 11, 12, 13, 14
+ "pwm1_1" "pwm" 20,
+ "pwm0" "pwm" 21,
+ "pwm1_0" "pwm" 22,
+ "snfi" "flash" 23, 24, 25, 26, 27, 28
+ "spi1_2" "spi" 29, 30, 31, 32
+ "emmc_45" "emmc" 22, 23, 24, 25, 26, 27, 28, 29, 30,
+ 31, 32
+ "spi1_1" "spi" 23, 24, 25, 26
+ "uart1_2" "uart" 29, 30, 31, 32
+ "uart1_1" "uart" 23, 24, 25, 26
+ "uart2_0" "uart" 29, 30, 31, 32
+ "spi0" "spi" 33, 34, 35, 36
+ "spi0_wp_hold" "spi" 37, 38
+ "uart1_3_rx_tx" "uart" 35, 36
+ "uart1_3_cts_rts" "uart" 37, 38
+ "uart2_1" "uart" 33, 34, 35, 36
+ "spi1_3" "spi" 33, 34, 35, 36
+ "uart0" "uart" 39, 40
+ "pcie_pereset" "pcie" 41
+ "uart1" "uart" 42, 43, 44, 45
+ "uart2" "uart" 46, 47, 48, 49
+ "emmc_51" "emmc" 50, 51, 52, 53, 54, 55, 56, 57, 57,
+ 59, 60, 61
+ "pcm" "audio" 62, 63, 64, 65
+ "i2s" "audio" 62, 63, 64, 65
+ "switch_int" "eth" 66
+ "mdc_mdio" "eth" 67
+
+ $ref: "/schemas/pinctrl/pinmux-node.yaml"
+ properties:
+ function:
+ description: |
+ A string containing the name of the function to mux to the group.
+ There is no "audio", "pcie" functions on mt7986b, you can only use
+ those functions on mt7986a.
+ enum: [audio, emmc, eth, i2c, led, flash, pcie, pwm, spi, uart,
+ watchdog, wifi]
+ groups:
+ description: |
+ An array of strings. Each string contains the name of a group.
+ There is no "pcie_pereset", "uart1", "uart2" "emmc_51", "pcm",
+ and "i2s" groups on mt7986b, you can only use those groups on
+ mt7986a.
+ required:
+ - function
+ - groups
+
+ allOf:
+ - if:
+ properties:
+ function:
+ const: audio
+ then:
+ properties:
+ groups:
+ enum: [pcm, i2s]
+ - if:
+ properties:
+ function:
+ const: emmc
+ then:
+ properties:
+ groups:
+ enum: [emmc, emmc_rst]
+ - if:
+ properties:
+ function:
+ const: eth
+ then:
+ properties:
+ groups:
+ enum: [switch_int, mdc_mdio]
+ - if:
+ properties:
+ function:
+ const: i2c
+ then:
+ properties:
+ groups:
+ enum: [i2c]
+ - if:
+ properties:
+ function:
+ const: led
+ then:
+ properties:
+ groups:
+ enum: [wifi_led]
+ - if:
+ properties:
+ function:
+ const: flash
+ then:
+ properties:
+ groups:
+ enum: [snfi]
+ - if:
+ properties:
+ function:
+ const: pcie
+ then:
+ properties:
+ groups:
+ enum: [pcie_clk, pcie_wake, pcie_pereset]
+ - if:
+ properties:
+ function:
+ const: pwm
+ then:
+ properties:
+ groups:
+ enum: [pwm0, pwm1_0, pwm1_1]
+ - if:
+ properties:
+ function:
+ const: spi
+ then:
+ properties:
+ groups:
+ enum: [spi0, spi0_wp_hold, spi1_0, spi1_1, spi1_2, spi1_3]
+ - if:
+ properties:
+ function:
+ const: uart
+ then:
+ properties:
+ groups:
+ enum: [uart1_0, uart1_1, uart1_2, uart1_3_rx_tx,
+ uart1_3_cts_rts, uart2_0, uart2_1, uart0, uart1, uart2]
+ - if:
+ properties:
+ function:
+ const: watchdog
+ then:
+ properties:
+ groups:
+ enum: [watchdog]
+ - if:
+ properties:
+ function:
+ const: wifi
+ then:
+ properties:
+ groups:
+ enum: [wf_2g, wf_5g, wf_dbdc]
+ '.*conf.*':
+ type: object
+ additionalProperties: false
+ description: |
+ pinconf configuration nodes.
+ $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+ properties:
+ pins:
+ description: |
+ An array of strings. Each string contains the name of a pin.
+ There is no PIN 41 to PIN 65 above on mt7686b, you can only use
+ those pins on mt7986a.
+ enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0,
+ GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
+ GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14,
+ GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS,
+ SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS,
+ SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP,
+ UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD,
+ UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS,
+ UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2,
+ EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6,
+ EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX,
+ PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO,
+ WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK,
+ WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0,
+ WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9,
+ WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ,
+ WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3,
+ WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7,
+ WF1_HB8]
+
+ bias-disable: true
+
+ bias-pull-up: true
+
+ bias-pull-down: true
+
+ input-enable: true
+
+ input-disable: true
+
+ output-enable: true
+
+ output-low: true
+
+ output-high: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+ mediatek,pull-up-adv:
+ description: |
+ Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+ Pull up setings for 2 pull resistors, R0 and R1. Valid arguments
+ are described as below:
+ 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ mediatek,pull-down-adv:
+ description: |
+ Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+ Pull down setings for 2 pull resistors, R0 and R1. Valid arguments
+ are described as below:
+ 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ required:
+ - pins
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ pio: pinctrl@1001f000 {
+ compatible = "mediatek,mt7986a-pinctrl";
+ reg = <0 0x1001f000 0 0x1000>,
+ <0 0x11c30000 0 0x1000>,
+ <0 0x11c40000 0 0x1000>,
+ <0 0x11e20000 0 0x1000>,
+ <0 0x11e30000 0 0x1000>,
+ <0 0x11f00000 0 0x1000>,
+ <0 0x11f10000 0 0x1000>,
+ <0 0x1000b000 0 0x1000>;
+ reg-names = "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt",
+ "iocfg_lb", "iocfg_tr", "iocfg_tl", "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 100>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+
+ uart1_pins: uart1-pins {
+ mux {
+ function = "uart";
+ groups = "uart1";
+ };
+ };
+
+ uart2_pins: uart1-pins {
+ mux {
+ function = "uart";
+ groups = "uart2";
+ };
+ };
+
+ };
+ };
--
2.29.2
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 1/4] dt-bindings: pinctrl: update bindings for MT7986 SoC
@ 2021-10-14 7:58 ` Sam Shih
0 siblings, 0 replies; 21+ messages in thread
From: Sam Shih @ 2021-10-14 7:58 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Matthias Brugger, Sean Wang,
linux-gpio, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel
Cc: John Crispin, Ryder Lee, Sam Shih
This updates bindings for MT7986 pinctrl driver. The
difference of pinctrl between mt7986a and mt7986b is that pin-41 to
pin-65 do not exist on mt7986b
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
v7 : updated pinctcl node binding description, and separate pinctrl
part into a single patch series
Original thread:
https://lore.kernel.org/all/8348ed3e-c561-ad7e-fe9e-a31ed346d8d0@gmail.com/
v6 : fixed yamllint warnings/errors v2
v5 : fixed yamllint warnings/errors v1
v4 : used yaml format instead of txt format document
v3 : make mt7986 pinctrl bindings as a separate file
v2 : deleted the redundant description of mt7986a/mt7986b
---
.../pinctrl/mediatek,mt7986-pinctrl.yaml | 364 ++++++++++++++++++
1 file changed, 364 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
new file mode 100644
index 000000000000..79ab95dcb272
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
@@ -0,0 +1,363 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7986-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT7986 Pin Controller Device Tree Bindings
+
+maintainers:
+ - Sean Wang <sean.wang@kernel.org>
+
+description: |+
+ The MediaTek's MT7986 Pin controller is used to control SoC pins.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt7986a-pinctrl
+ - mediatek,mt7986b-pinctrl
+
+ reg:
+ minItems: 8
+ maxItems: 8
+
+ reg-names:
+ items:
+ - const: gpio
+ - const: iocfg_rt
+ - const: iocfg_rb
+ - const: iocfg_lt
+ - const: iocfg_lb
+ - const: iocfg_tr
+ - const: iocfg_tl
+ - const: eint
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description: |
+ Number of cells in GPIO specifier. Since the generic GPIO
+ binding is used, the amount of cells must be specified as 2. See the below
+ mentioned gpio binding representation for description of particular cells.
+
+ gpio-ranges:
+ minItems: 1
+ maxItems: 5
+ description: |
+ GPIO valid number range.
+
+ interrupt-controller: true
+
+ interrupts:
+ maxItems: 1
+
+ "#interrupt-cells":
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - gpio-controller
+ - "#gpio-cells"
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '.*mux.*':
+ type: object
+ additionalProperties: false
+ description: |
+ pinmux configuration nodes.
+
+ The following table shows the effective values of "group", "function"
+ properties and chip pinout pins
+
+ groups function pins (in pin#)
+ ---------------------------------------------------------------------
+ "watchdog" "watchdog" 0
+ "wifi_led" "led" 1, 2
+ "i2c" "i2c" 3, 4
+ "uart1_0" "uart" 7, 8, 9, 10
+ "pcie_clk" "pcie" 9
+ "pcie_wake" "pcie" 10
+ "spi1_0" "spi" 11, 12, 13, 14
+ "pwm1_1" "pwm" 20,
+ "pwm0" "pwm" 21,
+ "pwm1_0" "pwm" 22,
+ "snfi" "flash" 23, 24, 25, 26, 27, 28
+ "spi1_2" "spi" 29, 30, 31, 32
+ "emmc_45" "emmc" 22, 23, 24, 25, 26, 27, 28, 29, 30,
+ 31, 32
+ "spi1_1" "spi" 23, 24, 25, 26
+ "uart1_2" "uart" 29, 30, 31, 32
+ "uart1_1" "uart" 23, 24, 25, 26
+ "uart2_0" "uart" 29, 30, 31, 32
+ "spi0" "spi" 33, 34, 35, 36
+ "spi0_wp_hold" "spi" 37, 38
+ "uart1_3_rx_tx" "uart" 35, 36
+ "uart1_3_cts_rts" "uart" 37, 38
+ "uart2_1" "uart" 33, 34, 35, 36
+ "spi1_3" "spi" 33, 34, 35, 36
+ "uart0" "uart" 39, 40
+ "pcie_pereset" "pcie" 41
+ "uart1" "uart" 42, 43, 44, 45
+ "uart2" "uart" 46, 47, 48, 49
+ "emmc_51" "emmc" 50, 51, 52, 53, 54, 55, 56, 57, 57,
+ 59, 60, 61
+ "pcm" "audio" 62, 63, 64, 65
+ "i2s" "audio" 62, 63, 64, 65
+ "switch_int" "eth" 66
+ "mdc_mdio" "eth" 67
+
+ $ref: "/schemas/pinctrl/pinmux-node.yaml"
+ properties:
+ function:
+ description: |
+ A string containing the name of the function to mux to the group.
+ There is no "audio", "pcie" functions on mt7986b, you can only use
+ those functions on mt7986a.
+ enum: [audio, emmc, eth, i2c, led, flash, pcie, pwm, spi, uart,
+ watchdog, wifi]
+ groups:
+ description: |
+ An array of strings. Each string contains the name of a group.
+ There is no "pcie_pereset", "uart1", "uart2" "emmc_51", "pcm",
+ and "i2s" groups on mt7986b, you can only use those groups on
+ mt7986a.
+ required:
+ - function
+ - groups
+
+ allOf:
+ - if:
+ properties:
+ function:
+ const: audio
+ then:
+ properties:
+ groups:
+ enum: [pcm, i2s]
+ - if:
+ properties:
+ function:
+ const: emmc
+ then:
+ properties:
+ groups:
+ enum: [emmc, emmc_rst]
+ - if:
+ properties:
+ function:
+ const: eth
+ then:
+ properties:
+ groups:
+ enum: [switch_int, mdc_mdio]
+ - if:
+ properties:
+ function:
+ const: i2c
+ then:
+ properties:
+ groups:
+ enum: [i2c]
+ - if:
+ properties:
+ function:
+ const: led
+ then:
+ properties:
+ groups:
+ enum: [wifi_led]
+ - if:
+ properties:
+ function:
+ const: flash
+ then:
+ properties:
+ groups:
+ enum: [snfi]
+ - if:
+ properties:
+ function:
+ const: pcie
+ then:
+ properties:
+ groups:
+ enum: [pcie_clk, pcie_wake, pcie_pereset]
+ - if:
+ properties:
+ function:
+ const: pwm
+ then:
+ properties:
+ groups:
+ enum: [pwm0, pwm1_0, pwm1_1]
+ - if:
+ properties:
+ function:
+ const: spi
+ then:
+ properties:
+ groups:
+ enum: [spi0, spi0_wp_hold, spi1_0, spi1_1, spi1_2, spi1_3]
+ - if:
+ properties:
+ function:
+ const: uart
+ then:
+ properties:
+ groups:
+ enum: [uart1_0, uart1_1, uart1_2, uart1_3_rx_tx,
+ uart1_3_cts_rts, uart2_0, uart2_1, uart0, uart1, uart2]
+ - if:
+ properties:
+ function:
+ const: watchdog
+ then:
+ properties:
+ groups:
+ enum: [watchdog]
+ - if:
+ properties:
+ function:
+ const: wifi
+ then:
+ properties:
+ groups:
+ enum: [wf_2g, wf_5g, wf_dbdc]
+ '.*conf.*':
+ type: object
+ additionalProperties: false
+ description: |
+ pinconf configuration nodes.
+ $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+ properties:
+ pins:
+ description: |
+ An array of strings. Each string contains the name of a pin.
+ There is no PIN 41 to PIN 65 above on mt7686b, you can only use
+ those pins on mt7986a.
+ enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0,
+ GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
+ GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14,
+ GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS,
+ SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS,
+ SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP,
+ UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD,
+ UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS,
+ UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2,
+ EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6,
+ EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX,
+ PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO,
+ WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK,
+ WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0,
+ WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9,
+ WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ,
+ WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3,
+ WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7,
+ WF1_HB8]
+
+ bias-disable: true
+
+ bias-pull-up: true
+
+ bias-pull-down: true
+
+ input-enable: true
+
+ input-disable: true
+
+ output-enable: true
+
+ output-low: true
+
+ output-high: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+ mediatek,pull-up-adv:
+ description: |
+ Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+ Pull up setings for 2 pull resistors, R0 and R1. Valid arguments
+ are described as below:
+ 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ mediatek,pull-down-adv:
+ description: |
+ Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+ Pull down setings for 2 pull resistors, R0 and R1. Valid arguments
+ are described as below:
+ 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ required:
+ - pins
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ pio: pinctrl@1001f000 {
+ compatible = "mediatek,mt7986a-pinctrl";
+ reg = <0 0x1001f000 0 0x1000>,
+ <0 0x11c30000 0 0x1000>,
+ <0 0x11c40000 0 0x1000>,
+ <0 0x11e20000 0 0x1000>,
+ <0 0x11e30000 0 0x1000>,
+ <0 0x11f00000 0 0x1000>,
+ <0 0x11f10000 0 0x1000>,
+ <0 0x1000b000 0 0x1000>;
+ reg-names = "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt",
+ "iocfg_lb", "iocfg_tr", "iocfg_tl", "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 100>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+
+ uart1_pins: uart1-pins {
+ mux {
+ function = "uart";
+ groups = "uart1";
+ };
+ };
+
+ uart2_pins: uart1-pins {
+ mux {
+ function = "uart";
+ groups = "uart2";
+ };
+ };
+
+ };
+ };
--
2.29.2
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 1/4] dt-bindings: pinctrl: update bindings for MT7986 SoC
@ 2021-10-14 7:58 ` Sam Shih
0 siblings, 0 replies; 21+ messages in thread
From: Sam Shih @ 2021-10-14 7:58 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Matthias Brugger, Sean Wang,
linux-gpio, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel
Cc: John Crispin, Ryder Lee, Sam Shih
This updates bindings for MT7986 pinctrl driver. The
difference of pinctrl between mt7986a and mt7986b is that pin-41 to
pin-65 do not exist on mt7986b
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
v7 : updated pinctcl node binding description, and separate pinctrl
part into a single patch series
Original thread:
https://lore.kernel.org/all/8348ed3e-c561-ad7e-fe9e-a31ed346d8d0@gmail.com/
v6 : fixed yamllint warnings/errors v2
v5 : fixed yamllint warnings/errors v1
v4 : used yaml format instead of txt format document
v3 : make mt7986 pinctrl bindings as a separate file
v2 : deleted the redundant description of mt7986a/mt7986b
---
.../pinctrl/mediatek,mt7986-pinctrl.yaml | 364 ++++++++++++++++++
1 file changed, 364 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
new file mode 100644
index 000000000000..79ab95dcb272
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
@@ -0,0 +1,363 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7986-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT7986 Pin Controller Device Tree Bindings
+
+maintainers:
+ - Sean Wang <sean.wang@kernel.org>
+
+description: |+
+ The MediaTek's MT7986 Pin controller is used to control SoC pins.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt7986a-pinctrl
+ - mediatek,mt7986b-pinctrl
+
+ reg:
+ minItems: 8
+ maxItems: 8
+
+ reg-names:
+ items:
+ - const: gpio
+ - const: iocfg_rt
+ - const: iocfg_rb
+ - const: iocfg_lt
+ - const: iocfg_lb
+ - const: iocfg_tr
+ - const: iocfg_tl
+ - const: eint
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description: |
+ Number of cells in GPIO specifier. Since the generic GPIO
+ binding is used, the amount of cells must be specified as 2. See the below
+ mentioned gpio binding representation for description of particular cells.
+
+ gpio-ranges:
+ minItems: 1
+ maxItems: 5
+ description: |
+ GPIO valid number range.
+
+ interrupt-controller: true
+
+ interrupts:
+ maxItems: 1
+
+ "#interrupt-cells":
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - gpio-controller
+ - "#gpio-cells"
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '.*mux.*':
+ type: object
+ additionalProperties: false
+ description: |
+ pinmux configuration nodes.
+
+ The following table shows the effective values of "group", "function"
+ properties and chip pinout pins
+
+ groups function pins (in pin#)
+ ---------------------------------------------------------------------
+ "watchdog" "watchdog" 0
+ "wifi_led" "led" 1, 2
+ "i2c" "i2c" 3, 4
+ "uart1_0" "uart" 7, 8, 9, 10
+ "pcie_clk" "pcie" 9
+ "pcie_wake" "pcie" 10
+ "spi1_0" "spi" 11, 12, 13, 14
+ "pwm1_1" "pwm" 20,
+ "pwm0" "pwm" 21,
+ "pwm1_0" "pwm" 22,
+ "snfi" "flash" 23, 24, 25, 26, 27, 28
+ "spi1_2" "spi" 29, 30, 31, 32
+ "emmc_45" "emmc" 22, 23, 24, 25, 26, 27, 28, 29, 30,
+ 31, 32
+ "spi1_1" "spi" 23, 24, 25, 26
+ "uart1_2" "uart" 29, 30, 31, 32
+ "uart1_1" "uart" 23, 24, 25, 26
+ "uart2_0" "uart" 29, 30, 31, 32
+ "spi0" "spi" 33, 34, 35, 36
+ "spi0_wp_hold" "spi" 37, 38
+ "uart1_3_rx_tx" "uart" 35, 36
+ "uart1_3_cts_rts" "uart" 37, 38
+ "uart2_1" "uart" 33, 34, 35, 36
+ "spi1_3" "spi" 33, 34, 35, 36
+ "uart0" "uart" 39, 40
+ "pcie_pereset" "pcie" 41
+ "uart1" "uart" 42, 43, 44, 45
+ "uart2" "uart" 46, 47, 48, 49
+ "emmc_51" "emmc" 50, 51, 52, 53, 54, 55, 56, 57, 57,
+ 59, 60, 61
+ "pcm" "audio" 62, 63, 64, 65
+ "i2s" "audio" 62, 63, 64, 65
+ "switch_int" "eth" 66
+ "mdc_mdio" "eth" 67
+
+ $ref: "/schemas/pinctrl/pinmux-node.yaml"
+ properties:
+ function:
+ description: |
+ A string containing the name of the function to mux to the group.
+ There is no "audio", "pcie" functions on mt7986b, you can only use
+ those functions on mt7986a.
+ enum: [audio, emmc, eth, i2c, led, flash, pcie, pwm, spi, uart,
+ watchdog, wifi]
+ groups:
+ description: |
+ An array of strings. Each string contains the name of a group.
+ There is no "pcie_pereset", "uart1", "uart2" "emmc_51", "pcm",
+ and "i2s" groups on mt7986b, you can only use those groups on
+ mt7986a.
+ required:
+ - function
+ - groups
+
+ allOf:
+ - if:
+ properties:
+ function:
+ const: audio
+ then:
+ properties:
+ groups:
+ enum: [pcm, i2s]
+ - if:
+ properties:
+ function:
+ const: emmc
+ then:
+ properties:
+ groups:
+ enum: [emmc, emmc_rst]
+ - if:
+ properties:
+ function:
+ const: eth
+ then:
+ properties:
+ groups:
+ enum: [switch_int, mdc_mdio]
+ - if:
+ properties:
+ function:
+ const: i2c
+ then:
+ properties:
+ groups:
+ enum: [i2c]
+ - if:
+ properties:
+ function:
+ const: led
+ then:
+ properties:
+ groups:
+ enum: [wifi_led]
+ - if:
+ properties:
+ function:
+ const: flash
+ then:
+ properties:
+ groups:
+ enum: [snfi]
+ - if:
+ properties:
+ function:
+ const: pcie
+ then:
+ properties:
+ groups:
+ enum: [pcie_clk, pcie_wake, pcie_pereset]
+ - if:
+ properties:
+ function:
+ const: pwm
+ then:
+ properties:
+ groups:
+ enum: [pwm0, pwm1_0, pwm1_1]
+ - if:
+ properties:
+ function:
+ const: spi
+ then:
+ properties:
+ groups:
+ enum: [spi0, spi0_wp_hold, spi1_0, spi1_1, spi1_2, spi1_3]
+ - if:
+ properties:
+ function:
+ const: uart
+ then:
+ properties:
+ groups:
+ enum: [uart1_0, uart1_1, uart1_2, uart1_3_rx_tx,
+ uart1_3_cts_rts, uart2_0, uart2_1, uart0, uart1, uart2]
+ - if:
+ properties:
+ function:
+ const: watchdog
+ then:
+ properties:
+ groups:
+ enum: [watchdog]
+ - if:
+ properties:
+ function:
+ const: wifi
+ then:
+ properties:
+ groups:
+ enum: [wf_2g, wf_5g, wf_dbdc]
+ '.*conf.*':
+ type: object
+ additionalProperties: false
+ description: |
+ pinconf configuration nodes.
+ $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+ properties:
+ pins:
+ description: |
+ An array of strings. Each string contains the name of a pin.
+ There is no PIN 41 to PIN 65 above on mt7686b, you can only use
+ those pins on mt7986a.
+ enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0,
+ GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
+ GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14,
+ GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS,
+ SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS,
+ SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP,
+ UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD,
+ UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS,
+ UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2,
+ EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6,
+ EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX,
+ PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO,
+ WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK,
+ WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0,
+ WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9,
+ WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ,
+ WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3,
+ WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7,
+ WF1_HB8]
+
+ bias-disable: true
+
+ bias-pull-up: true
+
+ bias-pull-down: true
+
+ input-enable: true
+
+ input-disable: true
+
+ output-enable: true
+
+ output-low: true
+
+ output-high: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+ mediatek,pull-up-adv:
+ description: |
+ Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+ Pull up setings for 2 pull resistors, R0 and R1. Valid arguments
+ are described as below:
+ 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ mediatek,pull-down-adv:
+ description: |
+ Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+ Pull down setings for 2 pull resistors, R0 and R1. Valid arguments
+ are described as below:
+ 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ required:
+ - pins
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ pio: pinctrl@1001f000 {
+ compatible = "mediatek,mt7986a-pinctrl";
+ reg = <0 0x1001f000 0 0x1000>,
+ <0 0x11c30000 0 0x1000>,
+ <0 0x11c40000 0 0x1000>,
+ <0 0x11e20000 0 0x1000>,
+ <0 0x11e30000 0 0x1000>,
+ <0 0x11f00000 0 0x1000>,
+ <0 0x11f10000 0 0x1000>,
+ <0 0x1000b000 0 0x1000>;
+ reg-names = "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt",
+ "iocfg_lb", "iocfg_tr", "iocfg_tl", "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 100>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+
+ uart1_pins: uart1-pins {
+ mux {
+ function = "uart";
+ groups = "uart1";
+ };
+ };
+
+ uart2_pins: uart1-pins {
+ mux {
+ function = "uart";
+ groups = "uart2";
+ };
+ };
+
+ };
+ };
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 2/4] pinctrl: mediatek: add support for MT7986 SoC
2021-10-14 7:58 ` Sam Shih
(?)
@ 2021-10-14 7:58 ` Sam Shih
-1 siblings, 0 replies; 21+ messages in thread
From: Sam Shih @ 2021-10-14 7:58 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Matthias Brugger, Sean Wang,
linux-gpio, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel
Cc: John Crispin, Ryder Lee, Sam Shih
This commit includes pinctrl driver for Mediatek MT7986
The difference of pinctrl between mt7986a and mt7986b
is that pin-41 to pin-65 do not exist on mt7986b
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
v7: updated register base binding and separate pinctrl part into a
single patch series
v4: fixed warning in mt7986 pinctrl driver
v3: applied the comment suggested by reviewers:
- merge the consecutive entries into one to reduce the table size
- set .name to NULL to indicate the pin is not ball out
v2: applied the comment suggested by reviewers:
- for the pins not ballout, we can fill .name in struct mtk_pin_desc
as NULL and return -ENOTSUPP in gpio/pinconf ops.
---
drivers/pinctrl/mediatek/Kconfig | 7 +
drivers/pinctrl/mediatek/Makefile | 1 +
drivers/pinctrl/mediatek/pinctrl-mt7986.c | 927 ++++++++++++++++++++++
3 files changed, 935 insertions(+)
create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7986.c
diff --git a/drivers/pinctrl/mediatek/Kconfig b/drivers/pinctrl/mediatek/Kconfig
index 7040a7a7bd5d..66db4ac5d169 100644
--- a/drivers/pinctrl/mediatek/Kconfig
+++ b/drivers/pinctrl/mediatek/Kconfig
@@ -119,6 +119,13 @@ config PINCTRL_MT7622
default ARM64 && ARCH_MEDIATEK
select PINCTRL_MTK_MOORE
+config PINCTRL_MT7986
+ bool "Mediatek MT7986 pin control"
+ depends on OF
+ depends on ARM64 || COMPILE_TEST
+ default ARM64 && ARCH_MEDIATEK
+ select PINCTRL_MTK_MOORE
+
config PINCTRL_MT8167
bool "Mediatek MT8167 pin control"
depends on OF
diff --git a/drivers/pinctrl/mediatek/Makefile b/drivers/pinctrl/mediatek/Makefile
index 1bb7f9c65bc2..1e3931d924e7 100644
--- a/drivers/pinctrl/mediatek/Makefile
+++ b/drivers/pinctrl/mediatek/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_PINCTRL_MT6797) += pinctrl-mt6797.o
obj-$(CONFIG_PINCTRL_MT7622) += pinctrl-mt7622.o
obj-$(CONFIG_PINCTRL_MT7623) += pinctrl-mt7623.o
obj-$(CONFIG_PINCTRL_MT7629) += pinctrl-mt7629.o
+obj-$(CONFIG_PINCTRL_MT7986) += pinctrl-mt7986.o
obj-$(CONFIG_PINCTRL_MT8167) += pinctrl-mt8167.o
obj-$(CONFIG_PINCTRL_MT8173) += pinctrl-mt8173.o
obj-$(CONFIG_PINCTRL_MT8183) += pinctrl-mt8183.o
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7986.c b/drivers/pinctrl/mediatek/pinctrl-mt7986.c
new file mode 100644
index 000000000000..f26869f1a367
--- /dev/null
+++ b/drivers/pinctrl/mediatek/pinctrl-mt7986.c
@@ -0,0 +1,927 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The MT7986 driver based on Linux generic pinctrl binding.
+ *
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ */
+
+#include "pinctrl-moore.h"
+
+#define MT7986_PIN(_number, _name) MTK_PIN(_number, _name, 0, _number, DRV_GRP4)
+#define MT7986_NOT_BALLOUT_PIN(_number) { .number = _number, .name = NULL }
+
+#define PIN_FIELD_BASE(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, \
+ _x_bits) \
+ PIN_FIELD_CALC(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, \
+ _x_bits, 32, 0)
+
+/**
+ * enum - Locking variants of the iocfg bases
+ *
+ * MT7986 have multiple bases to program pin configuration listed as the below:
+ * iocfg_rt:0x11c30000, iocfg_rb:0x11c40000, iocfg_lt:0x11e20000,
+ * iocfg_lb:0x11e30000, iocfg_tr:0x11f00000, iocfg_tl:0x11f10000,
+ * _i_based could be used to indicate what base the pin should be mapped into.
+ *
+ * Each iocfg register base control different group of pads on the SoC
+ *
+ *
+ * chip carrier
+ *
+ * A B C D E F G H
+ * +------------------------+
+ * 8 | o o o o o o o o |
+ * 7 | o o o o o o o o |
+ * 6 | o o o o o o o o |
+ * 5 | o o o o o o o o |
+ * 4 | o o o o o o o o |
+ * 3 | o o o o o o o o |
+ * 2 | o o o o o o o o |
+ * 1 | o o o o o o o o |
+ * +------------------------+
+ *
+ * inside Chip carrier
+ *
+ * A B C D E F G H
+ * +------------------------+
+ * 8 | |
+ * 7 | TL TR |
+ * 6 | +---------+ |
+ * 5 | LT | | RT |
+ * 4 | | | |
+ * 3 | LB | | RB |
+ * 2 | +---------+ |
+ * 1 | |
+ * +------------------------+
+ *
+ */
+
+enum {
+ GPIO_BASE,
+ IOCFG_RT_BASE,
+ IOCFG_RB_BASE,
+ IOCFG_LT_BASE,
+ IOCFG_LB_BASE,
+ IOCFG_TR_BASE,
+ IOCFG_TL_BASE,
+};
+
+static const char *const mt7986_pinctrl_register_base_names[] = {
+ "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt", "iocfg_lb", "iocfg_tr",
+ "iocfg_tl",
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_mode_range[] = {
+ PIN_FIELD(0, 100, 0x300, 0x10, 0, 4),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_dir_range[] = {
+ PIN_FIELD(0, 100, 0x0, 0x10, 0, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_di_range[] = {
+ PIN_FIELD(0, 100, 0x200, 0x10, 0, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_do_range[] = {
+ PIN_FIELD(0, 100, 0x100, 0x10, 0, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_ies_range[] = {
+ PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x40, 0x10, 17, 1),
+ PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x20, 0x10, 10, 1),
+ PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x20, 0x10, 0, 1),
+ PIN_FIELD_BASE(5, 6, IOCFG_RB_BASE, 0x40, 0x10, 0, 1),
+ PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x20, 0x10, 0, 1),
+ PIN_FIELD_BASE(11, 14, IOCFG_RB_BASE, 0x40, 0x10, 8, 1),
+ PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0x40, 0x10, 2, 1),
+ PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0x30, 0x10, 12, 1),
+ PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x30, 0x10, 18, 1),
+ PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x30, 0x10, 17, 1),
+ PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0x30, 0x10, 15, 1),
+ PIN_FIELD_BASE(28, 29, IOCFG_RT_BASE, 0x30, 0x10, 19, 1),
+ PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x30, 0x10, 23, 1),
+ PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x30, 0x10, 22, 1),
+ PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x30, 0x10, 21, 1),
+ PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x20, 0x10, 4, 1),
+ PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x20, 0x10, 8, 1),
+ PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x20, 0x10, 7, 1),
+ PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x20, 0x10, 5, 1),
+ PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x20, 0x10, 9, 1),
+ PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0x40, 0x10, 18, 1),
+ PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x40, 0x10, 12, 1),
+ PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x40, 0x10, 22, 1),
+ PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x40, 0x10, 20, 1),
+ PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x40, 0x10, 26, 1),
+ PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x40, 0x10, 24, 1),
+ PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x30, 0x10, 2, 1),
+ PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x30, 0x10, 1, 1),
+ PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x30, 0x10, 0, 1),
+ PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0x30, 0x10, 10, 1),
+ PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x40, 0x10, 15, 1),
+ PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x40, 0x10, 14, 1),
+ PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x40, 0x10, 13, 1),
+ PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x40, 0x10, 16, 1),
+ PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x20, 0x10, 2, 1),
+ PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x30, 0x10, 1, 1),
+ PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x30, 0x10, 0, 1),
+ PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x30, 0x10, 16, 1),
+ PIN_FIELD_BASE(72, 73, IOCFG_TR_BASE, 0x30, 0x10, 14, 1),
+ PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x30, 0x10, 4, 1),
+ PIN_FIELD_BASE(75, 77, IOCFG_TR_BASE, 0x30, 0x10, 6, 1),
+ PIN_FIELD_BASE(78, 79, IOCFG_TR_BASE, 0x30, 0x10, 2, 1),
+ PIN_FIELD_BASE(80, 84, IOCFG_TR_BASE, 0x30, 0x10, 9, 1),
+ PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x30, 0x10, 5, 1),
+ PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x30, 0x10, 1, 1),
+ PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x30, 0x10, 0, 1),
+ PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x30, 0x10, 14, 1),
+ PIN_FIELD_BASE(89, 90, IOCFG_TL_BASE, 0x30, 0x10, 12, 1),
+ PIN_FIELD_BASE(91, 94, IOCFG_TL_BASE, 0x30, 0x10, 4, 1),
+ PIN_FIELD_BASE(95, 96, IOCFG_TL_BASE, 0x30, 0x10, 2, 1),
+ PIN_FIELD_BASE(97, 100, IOCFG_TL_BASE, 0x30, 0x10, 8, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_smt_range[] = {
+ PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0xf0, 0x10, 17, 1),
+ PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x90, 0x10, 10, 1),
+ PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x90, 0x10, 0, 1),
+ PIN_FIELD_BASE(5, 6, IOCFG_RB_BASE, 0xf0, 0x10, 0, 1),
+ PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x90, 0x10, 0, 1),
+ PIN_FIELD_BASE(11, 14, IOCFG_RB_BASE, 0xf0, 0x10, 8, 1),
+ PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0xf0, 0x10, 2, 1),
+ PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0xc0, 0x10, 12, 1),
+ PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0xc0, 0x10, 18, 1),
+ PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0xc0, 0x10, 17, 1),
+ PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0xc0, 0x10, 15, 1),
+ PIN_FIELD_BASE(28, 29, IOCFG_RT_BASE, 0xc0, 0x10, 19, 1),
+ PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0xc0, 0x10, 23, 1),
+ PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0xc0, 0x10, 22, 1),
+ PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0xc0, 0x10, 21, 1),
+ PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x90, 0x10, 4, 1),
+ PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x90, 0x10, 8, 1),
+ PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x90, 0x10, 7, 1),
+ PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x90, 0x10, 5, 1),
+ PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x90, 0x10, 9, 1),
+ PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0xf0, 0x10, 18, 1),
+ PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0xf0, 0x10, 12, 1),
+ PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0xf0, 0x10, 22, 1),
+ PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0xf0, 0x10, 20, 1),
+ PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0xf0, 0x10, 26, 1),
+ PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0xf0, 0x10, 24, 1),
+ PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0xc0, 0x10, 2, 1),
+ PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0xc0, 0x10, 1, 1),
+ PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0xc0, 0x10, 0, 1),
+ PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0xc0, 0x10, 10, 1),
+ PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0xf0, 0x10, 15, 1),
+ PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0xf0, 0x10, 14, 1),
+ PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0xf0, 0x10, 13, 1),
+ PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0xf0, 0x10, 16, 1),
+ PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x90, 0x10, 2, 1),
+ PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x80, 0x10, 1, 1),
+ PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x80, 0x10, 0, 1),
+ PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x80, 0x10, 16, 1),
+ PIN_FIELD_BASE(72, 73, IOCFG_TR_BASE, 0x80, 0x10, 14, 1),
+ PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x80, 0x10, 4, 1),
+ PIN_FIELD_BASE(75, 77, IOCFG_TR_BASE, 0x80, 0x10, 6, 1),
+ PIN_FIELD_BASE(78, 79, IOCFG_TR_BASE, 0x80, 0x10, 2, 1),
+ PIN_FIELD_BASE(80, 84, IOCFG_TR_BASE, 0x80, 0x10, 9, 1),
+ PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x80, 0x10, 5, 1),
+ PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x70, 0x10, 1, 1),
+ PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x70, 0x10, 0, 1),
+ PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x70, 0x10, 14, 1),
+ PIN_FIELD_BASE(89, 90, IOCFG_TL_BASE, 0x70, 0x10, 12, 1),
+ PIN_FIELD_BASE(91, 94, IOCFG_TL_BASE, 0x70, 0x10, 4, 1),
+ PIN_FIELD_BASE(95, 96, IOCFG_TL_BASE, 0x70, 0x10, 2, 1),
+ PIN_FIELD_BASE(97, 100, IOCFG_TL_BASE, 0x70, 0x10, 8, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_pu_range[] = {
+ PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x50, 0x10, 1, 1),
+ PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x50, 0x10, 0, 1),
+ PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x50, 0x10, 16, 1),
+ PIN_FIELD_BASE(72, 73, IOCFG_TR_BASE, 0x50, 0x10, 14, 1),
+ PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x50, 0x10, 4, 1),
+ PIN_FIELD_BASE(75, 77, IOCFG_TR_BASE, 0x50, 0x10, 6, 1),
+ PIN_FIELD_BASE(78, 79, IOCFG_TR_BASE, 0x50, 0x10, 2, 1),
+ PIN_FIELD_BASE(80, 84, IOCFG_TR_BASE, 0x50, 0x10, 9, 1),
+ PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x50, 0x10, 5, 1),
+ PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x50, 0x10, 1, 1),
+ PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x50, 0x10, 0, 1),
+ PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x50, 0x10, 14, 1),
+ PIN_FIELD_BASE(89, 90, IOCFG_TL_BASE, 0x50, 0x10, 12, 1),
+ PIN_FIELD_BASE(91, 94, IOCFG_TL_BASE, 0x50, 0x10, 4, 1),
+ PIN_FIELD_BASE(95, 96, IOCFG_TL_BASE, 0x50, 0x10, 2, 1),
+ PIN_FIELD_BASE(97, 100, IOCFG_TL_BASE, 0x50, 0x10, 8, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_pd_range[] = {
+ PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x40, 0x10, 1, 1),
+ PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x40, 0x10, 0, 1),
+ PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x40, 0x10, 16, 1),
+ PIN_FIELD_BASE(72, 73, IOCFG_TR_BASE, 0x40, 0x10, 14, 1),
+ PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x40, 0x10, 4, 1),
+ PIN_FIELD_BASE(75, 77, IOCFG_TR_BASE, 0x40, 0x10, 6, 1),
+ PIN_FIELD_BASE(78, 79, IOCFG_TR_BASE, 0x40, 0x10, 2, 1),
+ PIN_FIELD_BASE(80, 84, IOCFG_TR_BASE, 0x40, 0x10, 9, 1),
+ PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x40, 0x10, 5, 1),
+ PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x40, 0x10, 1, 1),
+ PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x40, 0x10, 0, 1),
+ PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x40, 0x10, 14, 1),
+ PIN_FIELD_BASE(89, 90, IOCFG_TL_BASE, 0x40, 0x10, 12, 1),
+ PIN_FIELD_BASE(91, 94, IOCFG_TL_BASE, 0x40, 0x10, 4, 1),
+ PIN_FIELD_BASE(95, 96, IOCFG_TL_BASE, 0x40, 0x10, 2, 1),
+ PIN_FIELD_BASE(97, 100, IOCFG_TL_BASE, 0x40, 0x10, 8, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_drv_range[] = {
+ PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x10, 0x10, 21, 3),
+ PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x10, 0x10, 0, 3),
+ PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x00, 0x10, 0, 1),
+ PIN_FIELD_BASE(5, 5, IOCFG_RB_BASE, 0x00, 0x10, 0, 3),
+ PIN_FIELD_BASE(6, 6, IOCFG_RB_BASE, 0x00, 0x10, 21, 3),
+ PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x00, 0x10, 0, 3),
+ PIN_FIELD_BASE(11, 12, IOCFG_RB_BASE, 0x00, 0x10, 24, 3),
+ PIN_FIELD_BASE(13, 14, IOCFG_RB_BASE, 0x10, 0x10, 0, 3),
+ PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0x00, 0x10, 3, 3),
+ PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0x10, 0x10, 6, 3),
+ PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x10, 0x10, 24, 3),
+ PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x10, 0x10, 21, 3),
+ PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0x10, 0x10, 15, 3),
+ PIN_FIELD_BASE(28, 28, IOCFG_RT_BASE, 0x10, 0x10, 27, 3),
+ PIN_FIELD_BASE(29, 29, IOCFG_RT_BASE, 0x20, 0x10, 0, 3),
+ PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x20, 0x10, 9, 3),
+ PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x20, 0x10, 6, 3),
+ PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x20, 0x10, 3, 3),
+ PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x00, 0x10, 12, 3),
+ PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x00, 0x10, 24, 3),
+ PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x00, 0x10, 21, 3),
+ PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x00, 0x10, 15, 3),
+ PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x00, 0x10, 27, 3),
+ PIN_FIELD_BASE(39, 39, IOCFG_RB_BASE, 0x10, 0x10, 27, 3),
+ PIN_FIELD_BASE(40, 40, IOCFG_RB_BASE, 0x20, 0x10, 0, 3),
+ PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x10, 0x10, 6, 3),
+ PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x20, 0x10, 9, 3),
+ PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x20, 0x10, 3, 3),
+ PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x20, 0x10, 21, 3),
+ PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x20, 0x10, 15, 3),
+ PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x00, 0x10, 6, 3),
+ PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x00, 0x10, 3, 3),
+ PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x00, 0x10, 0, 3),
+ PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0x10, 0x10, 0, 3),
+ PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x10, 0x10, 15, 3),
+ PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x10, 0x10, 12, 3),
+ PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x10, 0x10, 9, 3),
+ PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x10, 0x10, 18, 3),
+ PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x00, 0x10, 2, 3),
+ PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x00, 0x10, 3, 3),
+ PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x00, 0x10, 0, 3),
+ PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x10, 0x10, 18, 3),
+ PIN_FIELD_BASE(72, 73, IOCFG_TR_BASE, 0x10, 0x10, 12, 3),
+ PIN_FIELD_BASE(74, 77, IOCFG_TR_BASE, 0x00, 0x10, 15, 3),
+ PIN_FIELD_BASE(78, 79, IOCFG_TR_BASE, 0x00, 0x10, 6, 3),
+ PIN_FIELD_BASE(80, 80, IOCFG_TR_BASE, 0x00, 0x10, 27, 3),
+ PIN_FIELD_BASE(81, 84, IOCFG_TR_BASE, 0x10, 0x10, 0, 3),
+ PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x00, 0x10, 12, 3),
+ PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x00, 0x10, 3, 3),
+ PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x00, 0x10, 0, 3),
+ PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x10, 0x10, 12, 3),
+ PIN_FIELD_BASE(89, 90, IOCFG_TL_BASE, 0x10, 0x10, 6, 3),
+ PIN_FIELD_BASE(91, 94, IOCFG_TL_BASE, 0x00, 0x10, 12, 3),
+ PIN_FIELD_BASE(95, 96, IOCFG_TL_BASE, 0x00, 0x10, 6, 3),
+ PIN_FIELD_BASE(97, 98, IOCFG_TL_BASE, 0x00, 0x10, 24, 3),
+ PIN_FIELD_BASE(99, 100, IOCFG_TL_BASE, 0x10, 0x10, 2, 3),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_pupd_range[] = {
+ PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x60, 0x10, 17, 1),
+ PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x30, 0x10, 10, 1),
+ PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x40, 0x10, 0, 1),
+ PIN_FIELD_BASE(5, 6, IOCFG_RB_BASE, 0x60, 0x10, 0, 1),
+ PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x30, 0x10, 0, 1),
+ PIN_FIELD_BASE(11, 14, IOCFG_RB_BASE, 0x60, 0x10, 8, 1),
+ PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0x60, 0x10, 2, 1),
+ PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0x40, 0x10, 12, 1),
+ PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x40, 0x10, 18, 1),
+ PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x40, 0x10, 17, 1),
+ PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0x40, 0x10, 15, 1),
+ PIN_FIELD_BASE(28, 29, IOCFG_RT_BASE, 0x40, 0x10, 19, 1),
+ PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x40, 0x10, 23, 1),
+ PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x40, 0x10, 22, 1),
+ PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x40, 0x10, 21, 1),
+ PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x30, 0x10, 4, 1),
+ PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x30, 0x10, 8, 1),
+ PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x30, 0x10, 7, 1),
+ PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x30, 0x10, 5, 1),
+ PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x30, 0x10, 9, 1),
+ PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0x60, 0x10, 18, 1),
+ PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x60, 0x10, 12, 1),
+ PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x60, 0x10, 22, 1),
+ PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x60, 0x10, 20, 1),
+ PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x60, 0x10, 26, 1),
+ PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x60, 0x10, 24, 1),
+ PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x40, 0x10, 2, 1),
+ PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x40, 0x10, 1, 1),
+ PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x40, 0x10, 0, 1),
+ PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0x40, 0x10, 10, 1),
+ PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x60, 0x10, 15, 1),
+ PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x60, 0x10, 14, 1),
+ PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x60, 0x10, 13, 1),
+ PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x60, 0x10, 16, 1),
+ PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x40, 0x10, 2, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_r0_range[] = {
+ PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x70, 0x10, 17, 1),
+ PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x40, 0x10, 10, 1),
+ PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x50, 0x10, 0, 1),
+ PIN_FIELD_BASE(5, 6, IOCFG_RB_BASE, 0x70, 0x10, 0, 1),
+ PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x40, 0x10, 0, 1),
+ PIN_FIELD_BASE(11, 14, IOCFG_RB_BASE, 0x70, 0x10, 8, 1),
+ PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0x70, 0x10, 2, 1),
+ PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0x50, 0x10, 12, 1),
+ PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x50, 0x10, 18, 1),
+ PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x50, 0x10, 17, 1),
+ PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0x50, 0x10, 15, 1),
+ PIN_FIELD_BASE(28, 29, IOCFG_RT_BASE, 0x50, 0x10, 19, 1),
+ PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x50, 0x10, 23, 1),
+ PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x50, 0x10, 22, 1),
+ PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x50, 0x10, 21, 1),
+ PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x40, 0x10, 4, 1),
+ PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x40, 0x10, 8, 1),
+ PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x40, 0x10, 7, 1),
+ PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x40, 0x10, 5, 1),
+ PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x40, 0x10, 9, 1),
+ PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0x70, 0x10, 18, 1),
+ PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x70, 0x10, 12, 1),
+ PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x70, 0x10, 22, 1),
+ PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x70, 0x10, 20, 1),
+ PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x70, 0x10, 26, 1),
+ PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x70, 0x10, 24, 1),
+ PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x50, 0x10, 2, 1),
+ PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x50, 0x10, 1, 1),
+ PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x50, 0x10, 0, 1),
+ PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0x50, 0x10, 10, 1),
+ PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x70, 0x10, 15, 1),
+ PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x70, 0x10, 14, 1),
+ PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x70, 0x10, 13, 1),
+ PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x70, 0x10, 16, 1),
+ PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x50, 0x10, 2, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_r1_range[] = {
+ PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x80, 0x10, 17, 1),
+ PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x50, 0x10, 10, 1),
+ PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x60, 0x10, 0, 1),
+ PIN_FIELD_BASE(5, 6, IOCFG_RB_BASE, 0x80, 0x10, 0, 1),
+ PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x50, 0x10, 0, 1),
+ PIN_FIELD_BASE(11, 14, IOCFG_RB_BASE, 0x80, 0x10, 8, 1),
+ PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0x80, 0x10, 2, 1),
+ PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0x60, 0x10, 12, 1),
+ PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x60, 0x10, 18, 1),
+ PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x60, 0x10, 17, 1),
+ PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0x60, 0x10, 15, 1),
+ PIN_FIELD_BASE(28, 29, IOCFG_RT_BASE, 0x60, 0x10, 19, 1),
+ PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x60, 0x10, 23, 1),
+ PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x60, 0x10, 22, 1),
+ PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x60, 0x10, 21, 1),
+ PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x50, 0x10, 4, 1),
+ PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x50, 0x10, 8, 1),
+ PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x50, 0x10, 7, 1),
+ PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x50, 0x10, 5, 1),
+ PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x50, 0x10, 9, 1),
+ PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0x80, 0x10, 18, 1),
+ PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x80, 0x10, 12, 1),
+ PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x80, 0x10, 22, 1),
+ PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x80, 0x10, 20, 1),
+ PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x80, 0x10, 26, 1),
+ PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x80, 0x10, 24, 1),
+ PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x60, 0x10, 2, 1),
+ PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x60, 0x10, 1, 1),
+ PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x60, 0x10, 0, 1),
+ PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0x60, 0x10, 10, 1),
+ PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x80, 0x10, 15, 1),
+ PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x80, 0x10, 14, 1),
+ PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x80, 0x10, 13, 1),
+ PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x80, 0x10, 16, 1),
+ PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x60, 0x10, 2, 1),
+};
+
+static const struct mtk_pin_reg_calc mt7986_reg_cals[] = {
+ [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt7986_pin_mode_range),
+ [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt7986_pin_dir_range),
+ [PINCTRL_PIN_REG_DI] = MTK_RANGE(mt7986_pin_di_range),
+ [PINCTRL_PIN_REG_DO] = MTK_RANGE(mt7986_pin_do_range),
+ [PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt7986_pin_smt_range),
+ [PINCTRL_PIN_REG_IES] = MTK_RANGE(mt7986_pin_ies_range),
+ [PINCTRL_PIN_REG_DRV] = MTK_RANGE(mt7986_pin_drv_range),
+ [PINCTRL_PIN_REG_PU] = MTK_RANGE(mt7986_pin_pu_range),
+ [PINCTRL_PIN_REG_PD] = MTK_RANGE(mt7986_pin_pd_range),
+ [PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt7986_pin_pupd_range),
+ [PINCTRL_PIN_REG_R0] = MTK_RANGE(mt7986_pin_r0_range),
+ [PINCTRL_PIN_REG_R1] = MTK_RANGE(mt7986_pin_r1_range),
+};
+
+static const struct mtk_pin_desc mt7986a_pins[] = {
+ MT7986_PIN(0, "SYS_WATCHDOG"),
+ MT7986_PIN(1, "WF2G_LED"),
+ MT7986_PIN(2, "WF5G_LED"),
+ MT7986_PIN(3, "I2C_SCL"),
+ MT7986_PIN(4, "I2C_SDA"),
+ MT7986_PIN(5, "GPIO_0"),
+ MT7986_PIN(6, "GPIO_1"),
+ MT7986_PIN(7, "GPIO_2"),
+ MT7986_PIN(8, "GPIO_3"),
+ MT7986_PIN(9, "GPIO_4"),
+ MT7986_PIN(10, "GPIO_5"),
+ MT7986_PIN(11, "GPIO_6"),
+ MT7986_PIN(12, "GPIO_7"),
+ MT7986_PIN(13, "GPIO_8"),
+ MT7986_PIN(14, "GPIO_9"),
+ MT7986_PIN(15, "GPIO_10"),
+ MT7986_PIN(16, "GPIO_11"),
+ MT7986_PIN(17, "GPIO_12"),
+ MT7986_PIN(18, "GPIO_13"),
+ MT7986_PIN(19, "GPIO_14"),
+ MT7986_PIN(20, "GPIO_15"),
+ MT7986_PIN(21, "PWM0"),
+ MT7986_PIN(22, "PWM1"),
+ MT7986_PIN(23, "SPI0_CLK"),
+ MT7986_PIN(24, "SPI0_MOSI"),
+ MT7986_PIN(25, "SPI0_MISO"),
+ MT7986_PIN(26, "SPI0_CS"),
+ MT7986_PIN(27, "SPI0_HOLD"),
+ MT7986_PIN(28, "SPI0_WP"),
+ MT7986_PIN(29, "SPI1_CLK"),
+ MT7986_PIN(30, "SPI1_MOSI"),
+ MT7986_PIN(31, "SPI1_MISO"),
+ MT7986_PIN(32, "SPI1_CS"),
+ MT7986_PIN(33, "SPI2_CLK"),
+ MT7986_PIN(34, "SPI2_MOSI"),
+ MT7986_PIN(35, "SPI2_MISO"),
+ MT7986_PIN(36, "SPI2_CS"),
+ MT7986_PIN(37, "SPI2_HOLD"),
+ MT7986_PIN(38, "SPI2_WP"),
+ MT7986_PIN(39, "UART0_RXD"),
+ MT7986_PIN(40, "UART0_TXD"),
+ MT7986_PIN(41, "PCIE_PERESET_N"),
+ MT7986_PIN(42, "UART1_RXD"),
+ MT7986_PIN(43, "UART1_TXD"),
+ MT7986_PIN(44, "UART1_CTS"),
+ MT7986_PIN(45, "UART1_RTS"),
+ MT7986_PIN(46, "UART2_RXD"),
+ MT7986_PIN(47, "UART2_TXD"),
+ MT7986_PIN(48, "UART2_CTS"),
+ MT7986_PIN(49, "UART2_RTS"),
+ MT7986_PIN(50, "EMMC_DATA_0"),
+ MT7986_PIN(51, "EMMC_DATA_1"),
+ MT7986_PIN(52, "EMMC_DATA_2"),
+ MT7986_PIN(53, "EMMC_DATA_3"),
+ MT7986_PIN(54, "EMMC_DATA_4"),
+ MT7986_PIN(55, "EMMC_DATA_5"),
+ MT7986_PIN(56, "EMMC_DATA_6"),
+ MT7986_PIN(57, "EMMC_DATA_7"),
+ MT7986_PIN(58, "EMMC_CMD"),
+ MT7986_PIN(59, "EMMC_CK"),
+ MT7986_PIN(60, "EMMC_DSL"),
+ MT7986_PIN(61, "EMMC_RSTB"),
+ MT7986_PIN(62, "PCM_DTX"),
+ MT7986_PIN(63, "PCM_DRX"),
+ MT7986_PIN(64, "PCM_CLK"),
+ MT7986_PIN(65, "PCM_FS"),
+ MT7986_PIN(66, "MT7531_INT"),
+ MT7986_PIN(67, "SMI_MDC"),
+ MT7986_PIN(68, "SMI_MDIO"),
+ MT7986_PIN(69, "WF0_DIG_RESETB"),
+ MT7986_PIN(70, "WF0_CBA_RESETB"),
+ MT7986_PIN(71, "WF0_XO_REQ"),
+ MT7986_PIN(72, "WF0_TOP_CLK"),
+ MT7986_PIN(73, "WF0_TOP_DATA"),
+ MT7986_PIN(74, "WF0_HB1"),
+ MT7986_PIN(75, "WF0_HB2"),
+ MT7986_PIN(76, "WF0_HB3"),
+ MT7986_PIN(77, "WF0_HB4"),
+ MT7986_PIN(78, "WF0_HB0"),
+ MT7986_PIN(79, "WF0_HB0_B"),
+ MT7986_PIN(80, "WF0_HB5"),
+ MT7986_PIN(81, "WF0_HB6"),
+ MT7986_PIN(82, "WF0_HB7"),
+ MT7986_PIN(83, "WF0_HB8"),
+ MT7986_PIN(84, "WF0_HB9"),
+ MT7986_PIN(85, "WF0_HB10"),
+ MT7986_PIN(86, "WF1_DIG_RESETB"),
+ MT7986_PIN(87, "WF1_CBA_RESETB"),
+ MT7986_PIN(88, "WF1_XO_REQ"),
+ MT7986_PIN(89, "WF1_TOP_CLK"),
+ MT7986_PIN(90, "WF1_TOP_DATA"),
+ MT7986_PIN(91, "WF1_HB1"),
+ MT7986_PIN(92, "WF1_HB2"),
+ MT7986_PIN(93, "WF1_HB3"),
+ MT7986_PIN(94, "WF1_HB4"),
+ MT7986_PIN(95, "WF1_HB0"),
+ MT7986_PIN(96, "WF1_HB0_B"),
+ MT7986_PIN(97, "WF1_HB5"),
+ MT7986_PIN(98, "WF1_HB6"),
+ MT7986_PIN(99, "WF1_HB7"),
+ MT7986_PIN(100, "WF1_HB8"),
+};
+
+static const struct mtk_pin_desc mt7986b_pins[] = {
+ MT7986_PIN(0, "SYS_WATCHDOG"),
+ MT7986_PIN(1, "WF2G_LED"),
+ MT7986_PIN(2, "WF5G_LED"),
+ MT7986_PIN(3, "I2C_SCL"),
+ MT7986_PIN(4, "I2C_SDA"),
+ MT7986_PIN(5, "GPIO_0"),
+ MT7986_PIN(6, "GPIO_1"),
+ MT7986_PIN(7, "GPIO_2"),
+ MT7986_PIN(8, "GPIO_3"),
+ MT7986_PIN(9, "GPIO_4"),
+ MT7986_PIN(10, "GPIO_5"),
+ MT7986_PIN(11, "GPIO_6"),
+ MT7986_PIN(12, "GPIO_7"),
+ MT7986_PIN(13, "GPIO_8"),
+ MT7986_PIN(14, "GPIO_9"),
+ MT7986_PIN(15, "GPIO_10"),
+ MT7986_PIN(16, "GPIO_11"),
+ MT7986_PIN(17, "GPIO_12"),
+ MT7986_PIN(18, "GPIO_13"),
+ MT7986_PIN(19, "GPIO_14"),
+ MT7986_PIN(20, "GPIO_15"),
+ MT7986_PIN(21, "PWM0"),
+ MT7986_PIN(22, "PWM1"),
+ MT7986_PIN(23, "SPI0_CLK"),
+ MT7986_PIN(24, "SPI0_MOSI"),
+ MT7986_PIN(25, "SPI0_MISO"),
+ MT7986_PIN(26, "SPI0_CS"),
+ MT7986_PIN(27, "SPI0_HOLD"),
+ MT7986_PIN(28, "SPI0_WP"),
+ MT7986_PIN(29, "SPI1_CLK"),
+ MT7986_PIN(30, "SPI1_MOSI"),
+ MT7986_PIN(31, "SPI1_MISO"),
+ MT7986_PIN(32, "SPI1_CS"),
+ MT7986_PIN(33, "SPI2_CLK"),
+ MT7986_PIN(34, "SPI2_MOSI"),
+ MT7986_PIN(35, "SPI2_MISO"),
+ MT7986_PIN(36, "SPI2_CS"),
+ MT7986_PIN(37, "SPI2_HOLD"),
+ MT7986_PIN(38, "SPI2_WP"),
+ MT7986_PIN(39, "UART0_RXD"),
+ MT7986_PIN(40, "UART0_TXD"),
+ MT7986_NOT_BALLOUT_PIN(41),
+ MT7986_NOT_BALLOUT_PIN(42),
+ MT7986_NOT_BALLOUT_PIN(43),
+ MT7986_NOT_BALLOUT_PIN(44),
+ MT7986_NOT_BALLOUT_PIN(45),
+ MT7986_NOT_BALLOUT_PIN(46),
+ MT7986_NOT_BALLOUT_PIN(47),
+ MT7986_NOT_BALLOUT_PIN(48),
+ MT7986_NOT_BALLOUT_PIN(49),
+ MT7986_NOT_BALLOUT_PIN(50),
+ MT7986_NOT_BALLOUT_PIN(51),
+ MT7986_NOT_BALLOUT_PIN(52),
+ MT7986_NOT_BALLOUT_PIN(53),
+ MT7986_NOT_BALLOUT_PIN(54),
+ MT7986_NOT_BALLOUT_PIN(55),
+ MT7986_NOT_BALLOUT_PIN(56),
+ MT7986_NOT_BALLOUT_PIN(57),
+ MT7986_NOT_BALLOUT_PIN(58),
+ MT7986_NOT_BALLOUT_PIN(59),
+ MT7986_NOT_BALLOUT_PIN(60),
+ MT7986_NOT_BALLOUT_PIN(61),
+ MT7986_NOT_BALLOUT_PIN(62),
+ MT7986_NOT_BALLOUT_PIN(63),
+ MT7986_NOT_BALLOUT_PIN(64),
+ MT7986_NOT_BALLOUT_PIN(65),
+ MT7986_PIN(66, "MT7531_INT"),
+ MT7986_PIN(67, "SMI_MDC"),
+ MT7986_PIN(68, "SMI_MDIO"),
+ MT7986_PIN(69, "WF0_DIG_RESETB"),
+ MT7986_PIN(70, "WF0_CBA_RESETB"),
+ MT7986_PIN(71, "WF0_XO_REQ"),
+ MT7986_PIN(72, "WF0_TOP_CLK"),
+ MT7986_PIN(73, "WF0_TOP_DATA"),
+ MT7986_PIN(74, "WF0_HB1"),
+ MT7986_PIN(75, "WF0_HB2"),
+ MT7986_PIN(76, "WF0_HB3"),
+ MT7986_PIN(77, "WF0_HB4"),
+ MT7986_PIN(78, "WF0_HB0"),
+ MT7986_PIN(79, "WF0_HB0_B"),
+ MT7986_PIN(80, "WF0_HB5"),
+ MT7986_PIN(81, "WF0_HB6"),
+ MT7986_PIN(82, "WF0_HB7"),
+ MT7986_PIN(83, "WF0_HB8"),
+ MT7986_PIN(84, "WF0_HB9"),
+ MT7986_PIN(85, "WF0_HB10"),
+ MT7986_PIN(86, "WF1_DIG_RESETB"),
+ MT7986_PIN(87, "WF1_CBA_RESETB"),
+ MT7986_PIN(88, "WF1_XO_REQ"),
+ MT7986_PIN(89, "WF1_TOP_CLK"),
+ MT7986_PIN(90, "WF1_TOP_DATA"),
+ MT7986_PIN(91, "WF1_HB1"),
+ MT7986_PIN(92, "WF1_HB2"),
+ MT7986_PIN(93, "WF1_HB3"),
+ MT7986_PIN(94, "WF1_HB4"),
+ MT7986_PIN(95, "WF1_HB0"),
+ MT7986_PIN(96, "WF1_HB0_B"),
+ MT7986_PIN(97, "WF1_HB5"),
+ MT7986_PIN(98, "WF1_HB6"),
+ MT7986_PIN(99, "WF1_HB7"),
+ MT7986_PIN(100, "WF1_HB8"),
+};
+
+/* List all groups consisting of these pins dedicated to the enablement of
+ * certain hardware block and the corresponding mode for all of the pins.
+ * The hardware probably has multiple combinations of these pinouts.
+ */
+
+static int mt7986_watchdog_pins[] = { 0, };
+static int mt7986_watchdog_funcs[] = { 1, };
+
+static int mt7986_wifi_led_pins[] = { 1, 2, };
+static int mt7986_wifi_led_funcs[] = { 1, 1, };
+
+static int mt7986_i2c_pins[] = { 3, 4, };
+static int mt7986_i2c_funcs[] = { 1, 1, };
+
+static int mt7986_uart1_0_pins[] = { 7, 8, 9, 10, };
+static int mt7986_uart1_0_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_spi1_0_pins[] = { 11, 12, 13, 14, };
+static int mt7986_spi1_0_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_pwm1_1_pins[] = { 20, };
+static int mt7986_pwm1_1_funcs[] = { 2, };
+
+static int mt7986_pwm0_pins[] = { 21, };
+static int mt7986_pwm0_funcs[] = { 1, };
+
+static int mt7986_pwm1_0_pins[] = { 22, };
+static int mt7986_pwm1_0_funcs[] = { 1, };
+
+static int mt7986_emmc_45_pins[] = {
+ 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, };
+static int mt7986_emmc_45_funcs[] = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, };
+
+static int mt7986_snfi_pins[] = { 23, 24, 25, 26, 27, 28, };
+static int mt7986_snfi_funcs[] = { 1, 1, 1, 1, 1, 1, };
+
+static int mt7986_spi1_1_pins[] = { 23, 24, 25, 26, };
+static int mt7986_spi1_1_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_uart1_1_pins[] = { 23, 24, 25, 26, };
+static int mt7986_uart1_1_funcs[] = { 4, 4, 4, 4, };
+
+static int mt7986_spi1_2_pins[] = { 29, 30, 31, 32, };
+static int mt7986_spi1_2_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_uart1_2_pins[] = { 29, 30, 31, 32, };
+static int mt7986_uart1_2_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_uart2_0_pins[] = { 29, 30, 31, 32, };
+static int mt7986_uart2_0_funcs[] = { 4, 4, 4, 4, };
+
+static int mt7986_spi0_pins[] = { 33, 34, 35, 36, };
+static int mt7986_spi0_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_spi0_wp_hold_pins[] = { 37, 38, };
+static int mt7986_spi0_wp_hold_funcs[] = { 1, 1, };
+
+static int mt7986_uart2_1_pins[] = { 33, 34, 35, 36, };
+static int mt7986_uart2_1_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_uart1_3_rx_tx_pins[] = { 35, 36, };
+static int mt7986_uart1_3_rx_tx_funcs[] = { 2, 2, };
+
+static int mt7986_uart1_3_cts_rts_pins[] = { 37, 38, };
+static int mt7986_uart1_3_cts_rts_funcs[] = { 2, 2, };
+
+static int mt7986_spi1_3_pins[] = { 33, 34, 35, 36, };
+static int mt7986_spi1_3_funcs[] = { 4, 4, 4, 4, };
+
+static int mt7986_uart0_pins[] = { 39, 40, };
+static int mt7986_uart0_funcs[] = { 1, 1, };
+
+static int mt7986_pcie_reset_pins[] = { 41, };
+static int mt7986_pcie_reset_funcs[] = { 1, };
+
+static int mt7986_uart1_pins[] = { 42, 43, 44, 45, };
+static int mt7986_uart1_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_uart2_pins[] = { 46, 47, 48, 49, };
+static int mt7986_uart2_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_emmc_51_pins[] = {
+ 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, };
+static int mt7986_emmc_51_funcs[] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, };
+
+static int mt7986_pcm_pins[] = { 62, 63, 64, 65, };
+static int mt7986_pcm_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_i2s_pins[] = { 62, 63, 64, 65, };
+static int mt7986_i2s_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_switch_int_pins[] = { 66, };
+static int mt7986_switch_int_funcs[] = { 1, };
+
+static int mt7986_mdc_mdio_pins[] = { 67, 68, };
+static int mt7986_mdc_mdio_funcs[] = { 1, 1, };
+
+static int mt7986_wf_2g_pins[] = {74, 75, 76, 77, 78, 79, 80, 81, 82, 83, };
+static int mt7986_wf_2g_funcs[] = {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, };
+
+static int mt7986_wf_5g_pins[] = {91, 92, 93, 94, 95, 96, 97, 98, 99, 100, };
+static int mt7986_wf_5g_funcs[] = {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, };
+
+static int mt7986_wf_dbdc_pins[] = {
+ 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, };
+static int mt7986_wf_dbdc_funcs[] = {
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, };
+
+static int mt7986_pcie_clk_pins[] = { 9, };
+static int mt7986_pcie_clk_funcs[] = { 1, };
+
+static int mt7986_pcie_wake_pins[] = { 10, };
+static int mt7986_pcie_wake_funcs[] = { 1, };
+
+static const struct group_desc mt7986_groups[] = {
+ PINCTRL_PIN_GROUP("watchdog", mt7986_watchdog),
+ PINCTRL_PIN_GROUP("wifi_led", mt7986_wifi_led),
+ PINCTRL_PIN_GROUP("i2c", mt7986_i2c),
+ PINCTRL_PIN_GROUP("uart1_0", mt7986_uart1_0),
+ PINCTRL_PIN_GROUP("pcie_clk", mt7986_pcie_clk),
+ PINCTRL_PIN_GROUP("pcie_wake", mt7986_pcie_wake),
+ PINCTRL_PIN_GROUP("spi1_0", mt7986_spi1_0),
+ PINCTRL_PIN_GROUP("pwm1_1", mt7986_pwm1_1),
+ PINCTRL_PIN_GROUP("pwm0", mt7986_pwm0),
+ PINCTRL_PIN_GROUP("pwm1_0", mt7986_pwm1_0),
+ PINCTRL_PIN_GROUP("emmc_45", mt7986_emmc_45),
+ PINCTRL_PIN_GROUP("snfi", mt7986_snfi),
+ PINCTRL_PIN_GROUP("spi1_1", mt7986_spi1_1),
+ PINCTRL_PIN_GROUP("uart1_1", mt7986_uart1_1),
+ PINCTRL_PIN_GROUP("spi1_2", mt7986_spi1_2),
+ PINCTRL_PIN_GROUP("uart1_2", mt7986_uart1_2),
+ PINCTRL_PIN_GROUP("uart2_0", mt7986_uart2_0),
+ PINCTRL_PIN_GROUP("spi0", mt7986_spi0),
+ PINCTRL_PIN_GROUP("spi0_wp_hold", mt7986_spi0_wp_hold),
+ PINCTRL_PIN_GROUP("uart2_1", mt7986_uart2_1),
+ PINCTRL_PIN_GROUP("uart1_3_rx_tx", mt7986_uart1_3_rx_tx),
+ PINCTRL_PIN_GROUP("uart1_3_cts_rts", mt7986_uart1_3_cts_rts),
+ PINCTRL_PIN_GROUP("spi1_3", mt7986_spi1_3),
+ PINCTRL_PIN_GROUP("uart0", mt7986_uart0),
+ PINCTRL_PIN_GROUP("switch_int", mt7986_switch_int),
+ PINCTRL_PIN_GROUP("mdc_mdio", mt7986_mdc_mdio),
+ PINCTRL_PIN_GROUP("pcie_pereset", mt7986_pcie_reset),
+ PINCTRL_PIN_GROUP("uart1", mt7986_uart1),
+ PINCTRL_PIN_GROUP("uart2", mt7986_uart2),
+ PINCTRL_PIN_GROUP("emmc_51", mt7986_emmc_51),
+ PINCTRL_PIN_GROUP("pcm", mt7986_pcm),
+ PINCTRL_PIN_GROUP("i2s", mt7986_i2s),
+ PINCTRL_PIN_GROUP("wf_2g", mt7986_wf_2g),
+ PINCTRL_PIN_GROUP("wf_5g", mt7986_wf_5g),
+ PINCTRL_PIN_GROUP("wf_dbdc", mt7986_wf_dbdc),
+};
+
+/* Joint those groups owning the same capability in user point of view which
+ * allows that people tend to use through the device tree.
+ */
+
+static const char *mt7986_audio_groups[] = { "pcm", "i2s" };
+static const char *mt7986_emmc_groups[] = {
+ "emmc_45", "emmc_51", };
+static const char *mt7986_ethernet_groups[] = {
+ "switch_int", "mdc_mdio", };
+static const char *mt7986_i2c_groups[] = { "i2c", };
+static const char *mt7986_led_groups[] = { "wifi_led", };
+static const char *mt7986_flash_groups[] = { "snfi", };
+static const char *mt7986_pcie_groups[] = {
+ "pcie_clk", "pcie_wake", "pcie_pereset" };
+static const char *mt7986_pwm_groups[] = { "pwm0", "pwm1_0", "pwm1_1", };
+static const char *mt7986_spi_groups[] = {
+ "spi0", "spi0_wp_hold", "spi1_0", "spi1_1", "spi1_2", "spi1_3", };
+static const char *mt7986_uart_groups[] = {
+ "uart1_0", "uart1_1", "uart1_2", "uart1_3_rx_tx", "uart1_3_cts_rts",
+ "uart2_0", "uart2_1", "uart0", "uart1", "uart2",
+};
+static const char *mt7986_wdt_groups[] = { "watchdog", };
+static const char *mt7986_wf_groups[] = { "wf_2g", "wf_5g", "wf_dbdc", };
+
+static const struct function_desc mt7986_functions[] = {
+ {"audio", mt7986_audio_groups, ARRAY_SIZE(mt7986_audio_groups)},
+ {"emmc", mt7986_emmc_groups, ARRAY_SIZE(mt7986_emmc_groups)},
+ {"eth", mt7986_ethernet_groups, ARRAY_SIZE(mt7986_ethernet_groups)},
+ {"i2c", mt7986_i2c_groups, ARRAY_SIZE(mt7986_i2c_groups)},
+ {"led", mt7986_led_groups, ARRAY_SIZE(mt7986_led_groups)},
+ {"flash", mt7986_flash_groups, ARRAY_SIZE(mt7986_flash_groups)},
+ {"pcie", mt7986_pcie_groups, ARRAY_SIZE(mt7986_pcie_groups)},
+ {"pwm", mt7986_pwm_groups, ARRAY_SIZE(mt7986_pwm_groups)},
+ {"spi", mt7986_spi_groups, ARRAY_SIZE(mt7986_spi_groups)},
+ {"uart", mt7986_uart_groups, ARRAY_SIZE(mt7986_uart_groups)},
+ {"watchdog", mt7986_wdt_groups, ARRAY_SIZE(mt7986_wdt_groups)},
+ {"wifi", mt7986_wf_groups, ARRAY_SIZE(mt7986_wf_groups)},
+};
+
+static const struct mtk_eint_hw mt7986a_eint_hw = {
+ .port_mask = 7,
+ .ports = 7,
+ .ap_num = ARRAY_SIZE(mt7986a_pins),
+ .db_cnt = 16,
+};
+
+static const struct mtk_eint_hw mt7986b_eint_hw = {
+ .port_mask = 7,
+ .ports = 7,
+ .ap_num = ARRAY_SIZE(mt7986b_pins),
+ .db_cnt = 16,
+};
+
+static struct mtk_pin_soc mt7986a_data = {
+ .reg_cal = mt7986_reg_cals,
+ .pins = mt7986a_pins,
+ .npins = ARRAY_SIZE(mt7986a_pins),
+ .grps = mt7986_groups,
+ .ngrps = ARRAY_SIZE(mt7986_groups),
+ .funcs = mt7986_functions,
+ .nfuncs = ARRAY_SIZE(mt7986_functions),
+ .eint_hw = &mt7986a_eint_hw,
+ .gpio_m = 0,
+ .ies_present = false,
+ .base_names = mt7986_pinctrl_register_base_names,
+ .nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names),
+ .bias_set_combo = mtk_pinconf_bias_set_combo,
+ .bias_get_combo = mtk_pinconf_bias_get_combo,
+ .drive_set = mtk_pinconf_drive_set_rev1,
+ .drive_get = mtk_pinconf_drive_get_rev1,
+ .adv_pull_get = mtk_pinconf_adv_pull_get,
+ .adv_pull_set = mtk_pinconf_adv_pull_set,
+};
+
+static struct mtk_pin_soc mt7986b_data = {
+ .reg_cal = mt7986_reg_cals,
+ .pins = mt7986b_pins,
+ .npins = ARRAY_SIZE(mt7986b_pins),
+ .grps = mt7986_groups,
+ .ngrps = ARRAY_SIZE(mt7986_groups),
+ .funcs = mt7986_functions,
+ .nfuncs = ARRAY_SIZE(mt7986_functions),
+ .eint_hw = &mt7986b_eint_hw,
+ .gpio_m = 0,
+ .ies_present = false,
+ .base_names = mt7986_pinctrl_register_base_names,
+ .nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names),
+ .bias_set_combo = mtk_pinconf_bias_set_combo,
+ .bias_get_combo = mtk_pinconf_bias_get_combo,
+ .drive_set = mtk_pinconf_drive_set_rev1,
+ .drive_get = mtk_pinconf_drive_get_rev1,
+ .adv_pull_get = mtk_pinconf_adv_pull_get,
+ .adv_pull_set = mtk_pinconf_adv_pull_set,
+};
+
+static const struct of_device_id mt7986a_pinctrl_of_match[] = {
+ {.compatible = "mediatek,mt7986a-pinctrl",},
+ {}
+};
+
+static const struct of_device_id mt7986b_pinctrl_of_match[] = {
+ {.compatible = "mediatek,mt7986b-pinctrl",},
+ {}
+};
+
+static int mt7986a_pinctrl_probe(struct platform_device *pdev)
+{
+ return mtk_moore_pinctrl_probe(pdev, &mt7986a_data);
+}
+
+static int mt7986b_pinctrl_probe(struct platform_device *pdev)
+{
+ return mtk_moore_pinctrl_probe(pdev, &mt7986b_data);
+}
+
+static struct platform_driver mt7986a_pinctrl_driver = {
+ .driver = {
+ .name = "mt7986a-pinctrl",
+ .of_match_table = mt7986a_pinctrl_of_match,
+ },
+ .probe = mt7986a_pinctrl_probe,
+};
+
+static struct platform_driver mt7986b_pinctrl_driver = {
+ .driver = {
+ .name = "mt7986b-pinctrl",
+ .of_match_table = mt7986b_pinctrl_of_match,
+ },
+ .probe = mt7986b_pinctrl_probe,
+};
+
+static int __init mt7986a_pinctrl_init(void)
+{
+ return platform_driver_register(&mt7986a_pinctrl_driver);
+}
+
+static int __init mt7986b_pinctrl_init(void)
+{
+ return platform_driver_register(&mt7986b_pinctrl_driver);
+}
+
+arch_initcall(mt7986a_pinctrl_init);
+arch_initcall(mt7986b_pinctrl_init);
--
2.29.2
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 2/4] pinctrl: mediatek: add support for MT7986 SoC
@ 2021-10-14 7:58 ` Sam Shih
0 siblings, 0 replies; 21+ messages in thread
From: Sam Shih @ 2021-10-14 7:58 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Matthias Brugger, Sean Wang,
linux-gpio, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel
Cc: John Crispin, Ryder Lee, Sam Shih
This commit includes pinctrl driver for Mediatek MT7986
The difference of pinctrl between mt7986a and mt7986b
is that pin-41 to pin-65 do not exist on mt7986b
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
v7: updated register base binding and separate pinctrl part into a
single patch series
v4: fixed warning in mt7986 pinctrl driver
v3: applied the comment suggested by reviewers:
- merge the consecutive entries into one to reduce the table size
- set .name to NULL to indicate the pin is not ball out
v2: applied the comment suggested by reviewers:
- for the pins not ballout, we can fill .name in struct mtk_pin_desc
as NULL and return -ENOTSUPP in gpio/pinconf ops.
---
drivers/pinctrl/mediatek/Kconfig | 7 +
drivers/pinctrl/mediatek/Makefile | 1 +
drivers/pinctrl/mediatek/pinctrl-mt7986.c | 927 ++++++++++++++++++++++
3 files changed, 935 insertions(+)
create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7986.c
diff --git a/drivers/pinctrl/mediatek/Kconfig b/drivers/pinctrl/mediatek/Kconfig
index 7040a7a7bd5d..66db4ac5d169 100644
--- a/drivers/pinctrl/mediatek/Kconfig
+++ b/drivers/pinctrl/mediatek/Kconfig
@@ -119,6 +119,13 @@ config PINCTRL_MT7622
default ARM64 && ARCH_MEDIATEK
select PINCTRL_MTK_MOORE
+config PINCTRL_MT7986
+ bool "Mediatek MT7986 pin control"
+ depends on OF
+ depends on ARM64 || COMPILE_TEST
+ default ARM64 && ARCH_MEDIATEK
+ select PINCTRL_MTK_MOORE
+
config PINCTRL_MT8167
bool "Mediatek MT8167 pin control"
depends on OF
diff --git a/drivers/pinctrl/mediatek/Makefile b/drivers/pinctrl/mediatek/Makefile
index 1bb7f9c65bc2..1e3931d924e7 100644
--- a/drivers/pinctrl/mediatek/Makefile
+++ b/drivers/pinctrl/mediatek/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_PINCTRL_MT6797) += pinctrl-mt6797.o
obj-$(CONFIG_PINCTRL_MT7622) += pinctrl-mt7622.o
obj-$(CONFIG_PINCTRL_MT7623) += pinctrl-mt7623.o
obj-$(CONFIG_PINCTRL_MT7629) += pinctrl-mt7629.o
+obj-$(CONFIG_PINCTRL_MT7986) += pinctrl-mt7986.o
obj-$(CONFIG_PINCTRL_MT8167) += pinctrl-mt8167.o
obj-$(CONFIG_PINCTRL_MT8173) += pinctrl-mt8173.o
obj-$(CONFIG_PINCTRL_MT8183) += pinctrl-mt8183.o
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7986.c b/drivers/pinctrl/mediatek/pinctrl-mt7986.c
new file mode 100644
index 000000000000..f26869f1a367
--- /dev/null
+++ b/drivers/pinctrl/mediatek/pinctrl-mt7986.c
@@ -0,0 +1,927 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The MT7986 driver based on Linux generic pinctrl binding.
+ *
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ */
+
+#include "pinctrl-moore.h"
+
+#define MT7986_PIN(_number, _name) MTK_PIN(_number, _name, 0, _number, DRV_GRP4)
+#define MT7986_NOT_BALLOUT_PIN(_number) { .number = _number, .name = NULL }
+
+#define PIN_FIELD_BASE(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, \
+ _x_bits) \
+ PIN_FIELD_CALC(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, \
+ _x_bits, 32, 0)
+
+/**
+ * enum - Locking variants of the iocfg bases
+ *
+ * MT7986 have multiple bases to program pin configuration listed as the below:
+ * iocfg_rt:0x11c30000, iocfg_rb:0x11c40000, iocfg_lt:0x11e20000,
+ * iocfg_lb:0x11e30000, iocfg_tr:0x11f00000, iocfg_tl:0x11f10000,
+ * _i_based could be used to indicate what base the pin should be mapped into.
+ *
+ * Each iocfg register base control different group of pads on the SoC
+ *
+ *
+ * chip carrier
+ *
+ * A B C D E F G H
+ * +------------------------+
+ * 8 | o o o o o o o o |
+ * 7 | o o o o o o o o |
+ * 6 | o o o o o o o o |
+ * 5 | o o o o o o o o |
+ * 4 | o o o o o o o o |
+ * 3 | o o o o o o o o |
+ * 2 | o o o o o o o o |
+ * 1 | o o o o o o o o |
+ * +------------------------+
+ *
+ * inside Chip carrier
+ *
+ * A B C D E F G H
+ * +------------------------+
+ * 8 | |
+ * 7 | TL TR |
+ * 6 | +---------+ |
+ * 5 | LT | | RT |
+ * 4 | | | |
+ * 3 | LB | | RB |
+ * 2 | +---------+ |
+ * 1 | |
+ * +------------------------+
+ *
+ */
+
+enum {
+ GPIO_BASE,
+ IOCFG_RT_BASE,
+ IOCFG_RB_BASE,
+ IOCFG_LT_BASE,
+ IOCFG_LB_BASE,
+ IOCFG_TR_BASE,
+ IOCFG_TL_BASE,
+};
+
+static const char *const mt7986_pinctrl_register_base_names[] = {
+ "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt", "iocfg_lb", "iocfg_tr",
+ "iocfg_tl",
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_mode_range[] = {
+ PIN_FIELD(0, 100, 0x300, 0x10, 0, 4),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_dir_range[] = {
+ PIN_FIELD(0, 100, 0x0, 0x10, 0, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_di_range[] = {
+ PIN_FIELD(0, 100, 0x200, 0x10, 0, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_do_range[] = {
+ PIN_FIELD(0, 100, 0x100, 0x10, 0, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_ies_range[] = {
+ PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x40, 0x10, 17, 1),
+ PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x20, 0x10, 10, 1),
+ PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x20, 0x10, 0, 1),
+ PIN_FIELD_BASE(5, 6, IOCFG_RB_BASE, 0x40, 0x10, 0, 1),
+ PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x20, 0x10, 0, 1),
+ PIN_FIELD_BASE(11, 14, IOCFG_RB_BASE, 0x40, 0x10, 8, 1),
+ PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0x40, 0x10, 2, 1),
+ PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0x30, 0x10, 12, 1),
+ PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x30, 0x10, 18, 1),
+ PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x30, 0x10, 17, 1),
+ PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0x30, 0x10, 15, 1),
+ PIN_FIELD_BASE(28, 29, IOCFG_RT_BASE, 0x30, 0x10, 19, 1),
+ PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x30, 0x10, 23, 1),
+ PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x30, 0x10, 22, 1),
+ PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x30, 0x10, 21, 1),
+ PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x20, 0x10, 4, 1),
+ PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x20, 0x10, 8, 1),
+ PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x20, 0x10, 7, 1),
+ PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x20, 0x10, 5, 1),
+ PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x20, 0x10, 9, 1),
+ PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0x40, 0x10, 18, 1),
+ PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x40, 0x10, 12, 1),
+ PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x40, 0x10, 22, 1),
+ PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x40, 0x10, 20, 1),
+ PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x40, 0x10, 26, 1),
+ PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x40, 0x10, 24, 1),
+ PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x30, 0x10, 2, 1),
+ PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x30, 0x10, 1, 1),
+ PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x30, 0x10, 0, 1),
+ PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0x30, 0x10, 10, 1),
+ PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x40, 0x10, 15, 1),
+ PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x40, 0x10, 14, 1),
+ PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x40, 0x10, 13, 1),
+ PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x40, 0x10, 16, 1),
+ PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x20, 0x10, 2, 1),
+ PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x30, 0x10, 1, 1),
+ PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x30, 0x10, 0, 1),
+ PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x30, 0x10, 16, 1),
+ PIN_FIELD_BASE(72, 73, IOCFG_TR_BASE, 0x30, 0x10, 14, 1),
+ PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x30, 0x10, 4, 1),
+ PIN_FIELD_BASE(75, 77, IOCFG_TR_BASE, 0x30, 0x10, 6, 1),
+ PIN_FIELD_BASE(78, 79, IOCFG_TR_BASE, 0x30, 0x10, 2, 1),
+ PIN_FIELD_BASE(80, 84, IOCFG_TR_BASE, 0x30, 0x10, 9, 1),
+ PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x30, 0x10, 5, 1),
+ PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x30, 0x10, 1, 1),
+ PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x30, 0x10, 0, 1),
+ PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x30, 0x10, 14, 1),
+ PIN_FIELD_BASE(89, 90, IOCFG_TL_BASE, 0x30, 0x10, 12, 1),
+ PIN_FIELD_BASE(91, 94, IOCFG_TL_BASE, 0x30, 0x10, 4, 1),
+ PIN_FIELD_BASE(95, 96, IOCFG_TL_BASE, 0x30, 0x10, 2, 1),
+ PIN_FIELD_BASE(97, 100, IOCFG_TL_BASE, 0x30, 0x10, 8, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_smt_range[] = {
+ PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0xf0, 0x10, 17, 1),
+ PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x90, 0x10, 10, 1),
+ PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x90, 0x10, 0, 1),
+ PIN_FIELD_BASE(5, 6, IOCFG_RB_BASE, 0xf0, 0x10, 0, 1),
+ PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x90, 0x10, 0, 1),
+ PIN_FIELD_BASE(11, 14, IOCFG_RB_BASE, 0xf0, 0x10, 8, 1),
+ PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0xf0, 0x10, 2, 1),
+ PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0xc0, 0x10, 12, 1),
+ PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0xc0, 0x10, 18, 1),
+ PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0xc0, 0x10, 17, 1),
+ PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0xc0, 0x10, 15, 1),
+ PIN_FIELD_BASE(28, 29, IOCFG_RT_BASE, 0xc0, 0x10, 19, 1),
+ PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0xc0, 0x10, 23, 1),
+ PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0xc0, 0x10, 22, 1),
+ PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0xc0, 0x10, 21, 1),
+ PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x90, 0x10, 4, 1),
+ PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x90, 0x10, 8, 1),
+ PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x90, 0x10, 7, 1),
+ PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x90, 0x10, 5, 1),
+ PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x90, 0x10, 9, 1),
+ PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0xf0, 0x10, 18, 1),
+ PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0xf0, 0x10, 12, 1),
+ PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0xf0, 0x10, 22, 1),
+ PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0xf0, 0x10, 20, 1),
+ PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0xf0, 0x10, 26, 1),
+ PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0xf0, 0x10, 24, 1),
+ PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0xc0, 0x10, 2, 1),
+ PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0xc0, 0x10, 1, 1),
+ PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0xc0, 0x10, 0, 1),
+ PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0xc0, 0x10, 10, 1),
+ PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0xf0, 0x10, 15, 1),
+ PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0xf0, 0x10, 14, 1),
+ PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0xf0, 0x10, 13, 1),
+ PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0xf0, 0x10, 16, 1),
+ PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x90, 0x10, 2, 1),
+ PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x80, 0x10, 1, 1),
+ PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x80, 0x10, 0, 1),
+ PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x80, 0x10, 16, 1),
+ PIN_FIELD_BASE(72, 73, IOCFG_TR_BASE, 0x80, 0x10, 14, 1),
+ PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x80, 0x10, 4, 1),
+ PIN_FIELD_BASE(75, 77, IOCFG_TR_BASE, 0x80, 0x10, 6, 1),
+ PIN_FIELD_BASE(78, 79, IOCFG_TR_BASE, 0x80, 0x10, 2, 1),
+ PIN_FIELD_BASE(80, 84, IOCFG_TR_BASE, 0x80, 0x10, 9, 1),
+ PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x80, 0x10, 5, 1),
+ PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x70, 0x10, 1, 1),
+ PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x70, 0x10, 0, 1),
+ PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x70, 0x10, 14, 1),
+ PIN_FIELD_BASE(89, 90, IOCFG_TL_BASE, 0x70, 0x10, 12, 1),
+ PIN_FIELD_BASE(91, 94, IOCFG_TL_BASE, 0x70, 0x10, 4, 1),
+ PIN_FIELD_BASE(95, 96, IOCFG_TL_BASE, 0x70, 0x10, 2, 1),
+ PIN_FIELD_BASE(97, 100, IOCFG_TL_BASE, 0x70, 0x10, 8, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_pu_range[] = {
+ PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x50, 0x10, 1, 1),
+ PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x50, 0x10, 0, 1),
+ PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x50, 0x10, 16, 1),
+ PIN_FIELD_BASE(72, 73, IOCFG_TR_BASE, 0x50, 0x10, 14, 1),
+ PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x50, 0x10, 4, 1),
+ PIN_FIELD_BASE(75, 77, IOCFG_TR_BASE, 0x50, 0x10, 6, 1),
+ PIN_FIELD_BASE(78, 79, IOCFG_TR_BASE, 0x50, 0x10, 2, 1),
+ PIN_FIELD_BASE(80, 84, IOCFG_TR_BASE, 0x50, 0x10, 9, 1),
+ PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x50, 0x10, 5, 1),
+ PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x50, 0x10, 1, 1),
+ PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x50, 0x10, 0, 1),
+ PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x50, 0x10, 14, 1),
+ PIN_FIELD_BASE(89, 90, IOCFG_TL_BASE, 0x50, 0x10, 12, 1),
+ PIN_FIELD_BASE(91, 94, IOCFG_TL_BASE, 0x50, 0x10, 4, 1),
+ PIN_FIELD_BASE(95, 96, IOCFG_TL_BASE, 0x50, 0x10, 2, 1),
+ PIN_FIELD_BASE(97, 100, IOCFG_TL_BASE, 0x50, 0x10, 8, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_pd_range[] = {
+ PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x40, 0x10, 1, 1),
+ PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x40, 0x10, 0, 1),
+ PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x40, 0x10, 16, 1),
+ PIN_FIELD_BASE(72, 73, IOCFG_TR_BASE, 0x40, 0x10, 14, 1),
+ PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x40, 0x10, 4, 1),
+ PIN_FIELD_BASE(75, 77, IOCFG_TR_BASE, 0x40, 0x10, 6, 1),
+ PIN_FIELD_BASE(78, 79, IOCFG_TR_BASE, 0x40, 0x10, 2, 1),
+ PIN_FIELD_BASE(80, 84, IOCFG_TR_BASE, 0x40, 0x10, 9, 1),
+ PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x40, 0x10, 5, 1),
+ PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x40, 0x10, 1, 1),
+ PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x40, 0x10, 0, 1),
+ PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x40, 0x10, 14, 1),
+ PIN_FIELD_BASE(89, 90, IOCFG_TL_BASE, 0x40, 0x10, 12, 1),
+ PIN_FIELD_BASE(91, 94, IOCFG_TL_BASE, 0x40, 0x10, 4, 1),
+ PIN_FIELD_BASE(95, 96, IOCFG_TL_BASE, 0x40, 0x10, 2, 1),
+ PIN_FIELD_BASE(97, 100, IOCFG_TL_BASE, 0x40, 0x10, 8, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_drv_range[] = {
+ PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x10, 0x10, 21, 3),
+ PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x10, 0x10, 0, 3),
+ PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x00, 0x10, 0, 1),
+ PIN_FIELD_BASE(5, 5, IOCFG_RB_BASE, 0x00, 0x10, 0, 3),
+ PIN_FIELD_BASE(6, 6, IOCFG_RB_BASE, 0x00, 0x10, 21, 3),
+ PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x00, 0x10, 0, 3),
+ PIN_FIELD_BASE(11, 12, IOCFG_RB_BASE, 0x00, 0x10, 24, 3),
+ PIN_FIELD_BASE(13, 14, IOCFG_RB_BASE, 0x10, 0x10, 0, 3),
+ PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0x00, 0x10, 3, 3),
+ PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0x10, 0x10, 6, 3),
+ PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x10, 0x10, 24, 3),
+ PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x10, 0x10, 21, 3),
+ PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0x10, 0x10, 15, 3),
+ PIN_FIELD_BASE(28, 28, IOCFG_RT_BASE, 0x10, 0x10, 27, 3),
+ PIN_FIELD_BASE(29, 29, IOCFG_RT_BASE, 0x20, 0x10, 0, 3),
+ PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x20, 0x10, 9, 3),
+ PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x20, 0x10, 6, 3),
+ PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x20, 0x10, 3, 3),
+ PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x00, 0x10, 12, 3),
+ PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x00, 0x10, 24, 3),
+ PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x00, 0x10, 21, 3),
+ PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x00, 0x10, 15, 3),
+ PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x00, 0x10, 27, 3),
+ PIN_FIELD_BASE(39, 39, IOCFG_RB_BASE, 0x10, 0x10, 27, 3),
+ PIN_FIELD_BASE(40, 40, IOCFG_RB_BASE, 0x20, 0x10, 0, 3),
+ PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x10, 0x10, 6, 3),
+ PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x20, 0x10, 9, 3),
+ PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x20, 0x10, 3, 3),
+ PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x20, 0x10, 21, 3),
+ PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x20, 0x10, 15, 3),
+ PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x00, 0x10, 6, 3),
+ PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x00, 0x10, 3, 3),
+ PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x00, 0x10, 0, 3),
+ PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0x10, 0x10, 0, 3),
+ PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x10, 0x10, 15, 3),
+ PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x10, 0x10, 12, 3),
+ PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x10, 0x10, 9, 3),
+ PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x10, 0x10, 18, 3),
+ PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x00, 0x10, 2, 3),
+ PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x00, 0x10, 3, 3),
+ PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x00, 0x10, 0, 3),
+ PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x10, 0x10, 18, 3),
+ PIN_FIELD_BASE(72, 73, IOCFG_TR_BASE, 0x10, 0x10, 12, 3),
+ PIN_FIELD_BASE(74, 77, IOCFG_TR_BASE, 0x00, 0x10, 15, 3),
+ PIN_FIELD_BASE(78, 79, IOCFG_TR_BASE, 0x00, 0x10, 6, 3),
+ PIN_FIELD_BASE(80, 80, IOCFG_TR_BASE, 0x00, 0x10, 27, 3),
+ PIN_FIELD_BASE(81, 84, IOCFG_TR_BASE, 0x10, 0x10, 0, 3),
+ PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x00, 0x10, 12, 3),
+ PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x00, 0x10, 3, 3),
+ PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x00, 0x10, 0, 3),
+ PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x10, 0x10, 12, 3),
+ PIN_FIELD_BASE(89, 90, IOCFG_TL_BASE, 0x10, 0x10, 6, 3),
+ PIN_FIELD_BASE(91, 94, IOCFG_TL_BASE, 0x00, 0x10, 12, 3),
+ PIN_FIELD_BASE(95, 96, IOCFG_TL_BASE, 0x00, 0x10, 6, 3),
+ PIN_FIELD_BASE(97, 98, IOCFG_TL_BASE, 0x00, 0x10, 24, 3),
+ PIN_FIELD_BASE(99, 100, IOCFG_TL_BASE, 0x10, 0x10, 2, 3),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_pupd_range[] = {
+ PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x60, 0x10, 17, 1),
+ PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x30, 0x10, 10, 1),
+ PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x40, 0x10, 0, 1),
+ PIN_FIELD_BASE(5, 6, IOCFG_RB_BASE, 0x60, 0x10, 0, 1),
+ PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x30, 0x10, 0, 1),
+ PIN_FIELD_BASE(11, 14, IOCFG_RB_BASE, 0x60, 0x10, 8, 1),
+ PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0x60, 0x10, 2, 1),
+ PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0x40, 0x10, 12, 1),
+ PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x40, 0x10, 18, 1),
+ PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x40, 0x10, 17, 1),
+ PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0x40, 0x10, 15, 1),
+ PIN_FIELD_BASE(28, 29, IOCFG_RT_BASE, 0x40, 0x10, 19, 1),
+ PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x40, 0x10, 23, 1),
+ PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x40, 0x10, 22, 1),
+ PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x40, 0x10, 21, 1),
+ PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x30, 0x10, 4, 1),
+ PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x30, 0x10, 8, 1),
+ PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x30, 0x10, 7, 1),
+ PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x30, 0x10, 5, 1),
+ PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x30, 0x10, 9, 1),
+ PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0x60, 0x10, 18, 1),
+ PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x60, 0x10, 12, 1),
+ PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x60, 0x10, 22, 1),
+ PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x60, 0x10, 20, 1),
+ PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x60, 0x10, 26, 1),
+ PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x60, 0x10, 24, 1),
+ PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x40, 0x10, 2, 1),
+ PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x40, 0x10, 1, 1),
+ PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x40, 0x10, 0, 1),
+ PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0x40, 0x10, 10, 1),
+ PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x60, 0x10, 15, 1),
+ PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x60, 0x10, 14, 1),
+ PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x60, 0x10, 13, 1),
+ PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x60, 0x10, 16, 1),
+ PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x40, 0x10, 2, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_r0_range[] = {
+ PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x70, 0x10, 17, 1),
+ PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x40, 0x10, 10, 1),
+ PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x50, 0x10, 0, 1),
+ PIN_FIELD_BASE(5, 6, IOCFG_RB_BASE, 0x70, 0x10, 0, 1),
+ PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x40, 0x10, 0, 1),
+ PIN_FIELD_BASE(11, 14, IOCFG_RB_BASE, 0x70, 0x10, 8, 1),
+ PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0x70, 0x10, 2, 1),
+ PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0x50, 0x10, 12, 1),
+ PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x50, 0x10, 18, 1),
+ PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x50, 0x10, 17, 1),
+ PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0x50, 0x10, 15, 1),
+ PIN_FIELD_BASE(28, 29, IOCFG_RT_BASE, 0x50, 0x10, 19, 1),
+ PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x50, 0x10, 23, 1),
+ PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x50, 0x10, 22, 1),
+ PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x50, 0x10, 21, 1),
+ PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x40, 0x10, 4, 1),
+ PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x40, 0x10, 8, 1),
+ PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x40, 0x10, 7, 1),
+ PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x40, 0x10, 5, 1),
+ PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x40, 0x10, 9, 1),
+ PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0x70, 0x10, 18, 1),
+ PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x70, 0x10, 12, 1),
+ PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x70, 0x10, 22, 1),
+ PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x70, 0x10, 20, 1),
+ PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x70, 0x10, 26, 1),
+ PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x70, 0x10, 24, 1),
+ PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x50, 0x10, 2, 1),
+ PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x50, 0x10, 1, 1),
+ PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x50, 0x10, 0, 1),
+ PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0x50, 0x10, 10, 1),
+ PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x70, 0x10, 15, 1),
+ PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x70, 0x10, 14, 1),
+ PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x70, 0x10, 13, 1),
+ PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x70, 0x10, 16, 1),
+ PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x50, 0x10, 2, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_r1_range[] = {
+ PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x80, 0x10, 17, 1),
+ PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x50, 0x10, 10, 1),
+ PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x60, 0x10, 0, 1),
+ PIN_FIELD_BASE(5, 6, IOCFG_RB_BASE, 0x80, 0x10, 0, 1),
+ PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x50, 0x10, 0, 1),
+ PIN_FIELD_BASE(11, 14, IOCFG_RB_BASE, 0x80, 0x10, 8, 1),
+ PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0x80, 0x10, 2, 1),
+ PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0x60, 0x10, 12, 1),
+ PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x60, 0x10, 18, 1),
+ PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x60, 0x10, 17, 1),
+ PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0x60, 0x10, 15, 1),
+ PIN_FIELD_BASE(28, 29, IOCFG_RT_BASE, 0x60, 0x10, 19, 1),
+ PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x60, 0x10, 23, 1),
+ PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x60, 0x10, 22, 1),
+ PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x60, 0x10, 21, 1),
+ PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x50, 0x10, 4, 1),
+ PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x50, 0x10, 8, 1),
+ PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x50, 0x10, 7, 1),
+ PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x50, 0x10, 5, 1),
+ PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x50, 0x10, 9, 1),
+ PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0x80, 0x10, 18, 1),
+ PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x80, 0x10, 12, 1),
+ PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x80, 0x10, 22, 1),
+ PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x80, 0x10, 20, 1),
+ PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x80, 0x10, 26, 1),
+ PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x80, 0x10, 24, 1),
+ PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x60, 0x10, 2, 1),
+ PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x60, 0x10, 1, 1),
+ PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x60, 0x10, 0, 1),
+ PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0x60, 0x10, 10, 1),
+ PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x80, 0x10, 15, 1),
+ PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x80, 0x10, 14, 1),
+ PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x80, 0x10, 13, 1),
+ PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x80, 0x10, 16, 1),
+ PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x60, 0x10, 2, 1),
+};
+
+static const struct mtk_pin_reg_calc mt7986_reg_cals[] = {
+ [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt7986_pin_mode_range),
+ [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt7986_pin_dir_range),
+ [PINCTRL_PIN_REG_DI] = MTK_RANGE(mt7986_pin_di_range),
+ [PINCTRL_PIN_REG_DO] = MTK_RANGE(mt7986_pin_do_range),
+ [PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt7986_pin_smt_range),
+ [PINCTRL_PIN_REG_IES] = MTK_RANGE(mt7986_pin_ies_range),
+ [PINCTRL_PIN_REG_DRV] = MTK_RANGE(mt7986_pin_drv_range),
+ [PINCTRL_PIN_REG_PU] = MTK_RANGE(mt7986_pin_pu_range),
+ [PINCTRL_PIN_REG_PD] = MTK_RANGE(mt7986_pin_pd_range),
+ [PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt7986_pin_pupd_range),
+ [PINCTRL_PIN_REG_R0] = MTK_RANGE(mt7986_pin_r0_range),
+ [PINCTRL_PIN_REG_R1] = MTK_RANGE(mt7986_pin_r1_range),
+};
+
+static const struct mtk_pin_desc mt7986a_pins[] = {
+ MT7986_PIN(0, "SYS_WATCHDOG"),
+ MT7986_PIN(1, "WF2G_LED"),
+ MT7986_PIN(2, "WF5G_LED"),
+ MT7986_PIN(3, "I2C_SCL"),
+ MT7986_PIN(4, "I2C_SDA"),
+ MT7986_PIN(5, "GPIO_0"),
+ MT7986_PIN(6, "GPIO_1"),
+ MT7986_PIN(7, "GPIO_2"),
+ MT7986_PIN(8, "GPIO_3"),
+ MT7986_PIN(9, "GPIO_4"),
+ MT7986_PIN(10, "GPIO_5"),
+ MT7986_PIN(11, "GPIO_6"),
+ MT7986_PIN(12, "GPIO_7"),
+ MT7986_PIN(13, "GPIO_8"),
+ MT7986_PIN(14, "GPIO_9"),
+ MT7986_PIN(15, "GPIO_10"),
+ MT7986_PIN(16, "GPIO_11"),
+ MT7986_PIN(17, "GPIO_12"),
+ MT7986_PIN(18, "GPIO_13"),
+ MT7986_PIN(19, "GPIO_14"),
+ MT7986_PIN(20, "GPIO_15"),
+ MT7986_PIN(21, "PWM0"),
+ MT7986_PIN(22, "PWM1"),
+ MT7986_PIN(23, "SPI0_CLK"),
+ MT7986_PIN(24, "SPI0_MOSI"),
+ MT7986_PIN(25, "SPI0_MISO"),
+ MT7986_PIN(26, "SPI0_CS"),
+ MT7986_PIN(27, "SPI0_HOLD"),
+ MT7986_PIN(28, "SPI0_WP"),
+ MT7986_PIN(29, "SPI1_CLK"),
+ MT7986_PIN(30, "SPI1_MOSI"),
+ MT7986_PIN(31, "SPI1_MISO"),
+ MT7986_PIN(32, "SPI1_CS"),
+ MT7986_PIN(33, "SPI2_CLK"),
+ MT7986_PIN(34, "SPI2_MOSI"),
+ MT7986_PIN(35, "SPI2_MISO"),
+ MT7986_PIN(36, "SPI2_CS"),
+ MT7986_PIN(37, "SPI2_HOLD"),
+ MT7986_PIN(38, "SPI2_WP"),
+ MT7986_PIN(39, "UART0_RXD"),
+ MT7986_PIN(40, "UART0_TXD"),
+ MT7986_PIN(41, "PCIE_PERESET_N"),
+ MT7986_PIN(42, "UART1_RXD"),
+ MT7986_PIN(43, "UART1_TXD"),
+ MT7986_PIN(44, "UART1_CTS"),
+ MT7986_PIN(45, "UART1_RTS"),
+ MT7986_PIN(46, "UART2_RXD"),
+ MT7986_PIN(47, "UART2_TXD"),
+ MT7986_PIN(48, "UART2_CTS"),
+ MT7986_PIN(49, "UART2_RTS"),
+ MT7986_PIN(50, "EMMC_DATA_0"),
+ MT7986_PIN(51, "EMMC_DATA_1"),
+ MT7986_PIN(52, "EMMC_DATA_2"),
+ MT7986_PIN(53, "EMMC_DATA_3"),
+ MT7986_PIN(54, "EMMC_DATA_4"),
+ MT7986_PIN(55, "EMMC_DATA_5"),
+ MT7986_PIN(56, "EMMC_DATA_6"),
+ MT7986_PIN(57, "EMMC_DATA_7"),
+ MT7986_PIN(58, "EMMC_CMD"),
+ MT7986_PIN(59, "EMMC_CK"),
+ MT7986_PIN(60, "EMMC_DSL"),
+ MT7986_PIN(61, "EMMC_RSTB"),
+ MT7986_PIN(62, "PCM_DTX"),
+ MT7986_PIN(63, "PCM_DRX"),
+ MT7986_PIN(64, "PCM_CLK"),
+ MT7986_PIN(65, "PCM_FS"),
+ MT7986_PIN(66, "MT7531_INT"),
+ MT7986_PIN(67, "SMI_MDC"),
+ MT7986_PIN(68, "SMI_MDIO"),
+ MT7986_PIN(69, "WF0_DIG_RESETB"),
+ MT7986_PIN(70, "WF0_CBA_RESETB"),
+ MT7986_PIN(71, "WF0_XO_REQ"),
+ MT7986_PIN(72, "WF0_TOP_CLK"),
+ MT7986_PIN(73, "WF0_TOP_DATA"),
+ MT7986_PIN(74, "WF0_HB1"),
+ MT7986_PIN(75, "WF0_HB2"),
+ MT7986_PIN(76, "WF0_HB3"),
+ MT7986_PIN(77, "WF0_HB4"),
+ MT7986_PIN(78, "WF0_HB0"),
+ MT7986_PIN(79, "WF0_HB0_B"),
+ MT7986_PIN(80, "WF0_HB5"),
+ MT7986_PIN(81, "WF0_HB6"),
+ MT7986_PIN(82, "WF0_HB7"),
+ MT7986_PIN(83, "WF0_HB8"),
+ MT7986_PIN(84, "WF0_HB9"),
+ MT7986_PIN(85, "WF0_HB10"),
+ MT7986_PIN(86, "WF1_DIG_RESETB"),
+ MT7986_PIN(87, "WF1_CBA_RESETB"),
+ MT7986_PIN(88, "WF1_XO_REQ"),
+ MT7986_PIN(89, "WF1_TOP_CLK"),
+ MT7986_PIN(90, "WF1_TOP_DATA"),
+ MT7986_PIN(91, "WF1_HB1"),
+ MT7986_PIN(92, "WF1_HB2"),
+ MT7986_PIN(93, "WF1_HB3"),
+ MT7986_PIN(94, "WF1_HB4"),
+ MT7986_PIN(95, "WF1_HB0"),
+ MT7986_PIN(96, "WF1_HB0_B"),
+ MT7986_PIN(97, "WF1_HB5"),
+ MT7986_PIN(98, "WF1_HB6"),
+ MT7986_PIN(99, "WF1_HB7"),
+ MT7986_PIN(100, "WF1_HB8"),
+};
+
+static const struct mtk_pin_desc mt7986b_pins[] = {
+ MT7986_PIN(0, "SYS_WATCHDOG"),
+ MT7986_PIN(1, "WF2G_LED"),
+ MT7986_PIN(2, "WF5G_LED"),
+ MT7986_PIN(3, "I2C_SCL"),
+ MT7986_PIN(4, "I2C_SDA"),
+ MT7986_PIN(5, "GPIO_0"),
+ MT7986_PIN(6, "GPIO_1"),
+ MT7986_PIN(7, "GPIO_2"),
+ MT7986_PIN(8, "GPIO_3"),
+ MT7986_PIN(9, "GPIO_4"),
+ MT7986_PIN(10, "GPIO_5"),
+ MT7986_PIN(11, "GPIO_6"),
+ MT7986_PIN(12, "GPIO_7"),
+ MT7986_PIN(13, "GPIO_8"),
+ MT7986_PIN(14, "GPIO_9"),
+ MT7986_PIN(15, "GPIO_10"),
+ MT7986_PIN(16, "GPIO_11"),
+ MT7986_PIN(17, "GPIO_12"),
+ MT7986_PIN(18, "GPIO_13"),
+ MT7986_PIN(19, "GPIO_14"),
+ MT7986_PIN(20, "GPIO_15"),
+ MT7986_PIN(21, "PWM0"),
+ MT7986_PIN(22, "PWM1"),
+ MT7986_PIN(23, "SPI0_CLK"),
+ MT7986_PIN(24, "SPI0_MOSI"),
+ MT7986_PIN(25, "SPI0_MISO"),
+ MT7986_PIN(26, "SPI0_CS"),
+ MT7986_PIN(27, "SPI0_HOLD"),
+ MT7986_PIN(28, "SPI0_WP"),
+ MT7986_PIN(29, "SPI1_CLK"),
+ MT7986_PIN(30, "SPI1_MOSI"),
+ MT7986_PIN(31, "SPI1_MISO"),
+ MT7986_PIN(32, "SPI1_CS"),
+ MT7986_PIN(33, "SPI2_CLK"),
+ MT7986_PIN(34, "SPI2_MOSI"),
+ MT7986_PIN(35, "SPI2_MISO"),
+ MT7986_PIN(36, "SPI2_CS"),
+ MT7986_PIN(37, "SPI2_HOLD"),
+ MT7986_PIN(38, "SPI2_WP"),
+ MT7986_PIN(39, "UART0_RXD"),
+ MT7986_PIN(40, "UART0_TXD"),
+ MT7986_NOT_BALLOUT_PIN(41),
+ MT7986_NOT_BALLOUT_PIN(42),
+ MT7986_NOT_BALLOUT_PIN(43),
+ MT7986_NOT_BALLOUT_PIN(44),
+ MT7986_NOT_BALLOUT_PIN(45),
+ MT7986_NOT_BALLOUT_PIN(46),
+ MT7986_NOT_BALLOUT_PIN(47),
+ MT7986_NOT_BALLOUT_PIN(48),
+ MT7986_NOT_BALLOUT_PIN(49),
+ MT7986_NOT_BALLOUT_PIN(50),
+ MT7986_NOT_BALLOUT_PIN(51),
+ MT7986_NOT_BALLOUT_PIN(52),
+ MT7986_NOT_BALLOUT_PIN(53),
+ MT7986_NOT_BALLOUT_PIN(54),
+ MT7986_NOT_BALLOUT_PIN(55),
+ MT7986_NOT_BALLOUT_PIN(56),
+ MT7986_NOT_BALLOUT_PIN(57),
+ MT7986_NOT_BALLOUT_PIN(58),
+ MT7986_NOT_BALLOUT_PIN(59),
+ MT7986_NOT_BALLOUT_PIN(60),
+ MT7986_NOT_BALLOUT_PIN(61),
+ MT7986_NOT_BALLOUT_PIN(62),
+ MT7986_NOT_BALLOUT_PIN(63),
+ MT7986_NOT_BALLOUT_PIN(64),
+ MT7986_NOT_BALLOUT_PIN(65),
+ MT7986_PIN(66, "MT7531_INT"),
+ MT7986_PIN(67, "SMI_MDC"),
+ MT7986_PIN(68, "SMI_MDIO"),
+ MT7986_PIN(69, "WF0_DIG_RESETB"),
+ MT7986_PIN(70, "WF0_CBA_RESETB"),
+ MT7986_PIN(71, "WF0_XO_REQ"),
+ MT7986_PIN(72, "WF0_TOP_CLK"),
+ MT7986_PIN(73, "WF0_TOP_DATA"),
+ MT7986_PIN(74, "WF0_HB1"),
+ MT7986_PIN(75, "WF0_HB2"),
+ MT7986_PIN(76, "WF0_HB3"),
+ MT7986_PIN(77, "WF0_HB4"),
+ MT7986_PIN(78, "WF0_HB0"),
+ MT7986_PIN(79, "WF0_HB0_B"),
+ MT7986_PIN(80, "WF0_HB5"),
+ MT7986_PIN(81, "WF0_HB6"),
+ MT7986_PIN(82, "WF0_HB7"),
+ MT7986_PIN(83, "WF0_HB8"),
+ MT7986_PIN(84, "WF0_HB9"),
+ MT7986_PIN(85, "WF0_HB10"),
+ MT7986_PIN(86, "WF1_DIG_RESETB"),
+ MT7986_PIN(87, "WF1_CBA_RESETB"),
+ MT7986_PIN(88, "WF1_XO_REQ"),
+ MT7986_PIN(89, "WF1_TOP_CLK"),
+ MT7986_PIN(90, "WF1_TOP_DATA"),
+ MT7986_PIN(91, "WF1_HB1"),
+ MT7986_PIN(92, "WF1_HB2"),
+ MT7986_PIN(93, "WF1_HB3"),
+ MT7986_PIN(94, "WF1_HB4"),
+ MT7986_PIN(95, "WF1_HB0"),
+ MT7986_PIN(96, "WF1_HB0_B"),
+ MT7986_PIN(97, "WF1_HB5"),
+ MT7986_PIN(98, "WF1_HB6"),
+ MT7986_PIN(99, "WF1_HB7"),
+ MT7986_PIN(100, "WF1_HB8"),
+};
+
+/* List all groups consisting of these pins dedicated to the enablement of
+ * certain hardware block and the corresponding mode for all of the pins.
+ * The hardware probably has multiple combinations of these pinouts.
+ */
+
+static int mt7986_watchdog_pins[] = { 0, };
+static int mt7986_watchdog_funcs[] = { 1, };
+
+static int mt7986_wifi_led_pins[] = { 1, 2, };
+static int mt7986_wifi_led_funcs[] = { 1, 1, };
+
+static int mt7986_i2c_pins[] = { 3, 4, };
+static int mt7986_i2c_funcs[] = { 1, 1, };
+
+static int mt7986_uart1_0_pins[] = { 7, 8, 9, 10, };
+static int mt7986_uart1_0_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_spi1_0_pins[] = { 11, 12, 13, 14, };
+static int mt7986_spi1_0_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_pwm1_1_pins[] = { 20, };
+static int mt7986_pwm1_1_funcs[] = { 2, };
+
+static int mt7986_pwm0_pins[] = { 21, };
+static int mt7986_pwm0_funcs[] = { 1, };
+
+static int mt7986_pwm1_0_pins[] = { 22, };
+static int mt7986_pwm1_0_funcs[] = { 1, };
+
+static int mt7986_emmc_45_pins[] = {
+ 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, };
+static int mt7986_emmc_45_funcs[] = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, };
+
+static int mt7986_snfi_pins[] = { 23, 24, 25, 26, 27, 28, };
+static int mt7986_snfi_funcs[] = { 1, 1, 1, 1, 1, 1, };
+
+static int mt7986_spi1_1_pins[] = { 23, 24, 25, 26, };
+static int mt7986_spi1_1_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_uart1_1_pins[] = { 23, 24, 25, 26, };
+static int mt7986_uart1_1_funcs[] = { 4, 4, 4, 4, };
+
+static int mt7986_spi1_2_pins[] = { 29, 30, 31, 32, };
+static int mt7986_spi1_2_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_uart1_2_pins[] = { 29, 30, 31, 32, };
+static int mt7986_uart1_2_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_uart2_0_pins[] = { 29, 30, 31, 32, };
+static int mt7986_uart2_0_funcs[] = { 4, 4, 4, 4, };
+
+static int mt7986_spi0_pins[] = { 33, 34, 35, 36, };
+static int mt7986_spi0_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_spi0_wp_hold_pins[] = { 37, 38, };
+static int mt7986_spi0_wp_hold_funcs[] = { 1, 1, };
+
+static int mt7986_uart2_1_pins[] = { 33, 34, 35, 36, };
+static int mt7986_uart2_1_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_uart1_3_rx_tx_pins[] = { 35, 36, };
+static int mt7986_uart1_3_rx_tx_funcs[] = { 2, 2, };
+
+static int mt7986_uart1_3_cts_rts_pins[] = { 37, 38, };
+static int mt7986_uart1_3_cts_rts_funcs[] = { 2, 2, };
+
+static int mt7986_spi1_3_pins[] = { 33, 34, 35, 36, };
+static int mt7986_spi1_3_funcs[] = { 4, 4, 4, 4, };
+
+static int mt7986_uart0_pins[] = { 39, 40, };
+static int mt7986_uart0_funcs[] = { 1, 1, };
+
+static int mt7986_pcie_reset_pins[] = { 41, };
+static int mt7986_pcie_reset_funcs[] = { 1, };
+
+static int mt7986_uart1_pins[] = { 42, 43, 44, 45, };
+static int mt7986_uart1_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_uart2_pins[] = { 46, 47, 48, 49, };
+static int mt7986_uart2_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_emmc_51_pins[] = {
+ 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, };
+static int mt7986_emmc_51_funcs[] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, };
+
+static int mt7986_pcm_pins[] = { 62, 63, 64, 65, };
+static int mt7986_pcm_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_i2s_pins[] = { 62, 63, 64, 65, };
+static int mt7986_i2s_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_switch_int_pins[] = { 66, };
+static int mt7986_switch_int_funcs[] = { 1, };
+
+static int mt7986_mdc_mdio_pins[] = { 67, 68, };
+static int mt7986_mdc_mdio_funcs[] = { 1, 1, };
+
+static int mt7986_wf_2g_pins[] = {74, 75, 76, 77, 78, 79, 80, 81, 82, 83, };
+static int mt7986_wf_2g_funcs[] = {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, };
+
+static int mt7986_wf_5g_pins[] = {91, 92, 93, 94, 95, 96, 97, 98, 99, 100, };
+static int mt7986_wf_5g_funcs[] = {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, };
+
+static int mt7986_wf_dbdc_pins[] = {
+ 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, };
+static int mt7986_wf_dbdc_funcs[] = {
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, };
+
+static int mt7986_pcie_clk_pins[] = { 9, };
+static int mt7986_pcie_clk_funcs[] = { 1, };
+
+static int mt7986_pcie_wake_pins[] = { 10, };
+static int mt7986_pcie_wake_funcs[] = { 1, };
+
+static const struct group_desc mt7986_groups[] = {
+ PINCTRL_PIN_GROUP("watchdog", mt7986_watchdog),
+ PINCTRL_PIN_GROUP("wifi_led", mt7986_wifi_led),
+ PINCTRL_PIN_GROUP("i2c", mt7986_i2c),
+ PINCTRL_PIN_GROUP("uart1_0", mt7986_uart1_0),
+ PINCTRL_PIN_GROUP("pcie_clk", mt7986_pcie_clk),
+ PINCTRL_PIN_GROUP("pcie_wake", mt7986_pcie_wake),
+ PINCTRL_PIN_GROUP("spi1_0", mt7986_spi1_0),
+ PINCTRL_PIN_GROUP("pwm1_1", mt7986_pwm1_1),
+ PINCTRL_PIN_GROUP("pwm0", mt7986_pwm0),
+ PINCTRL_PIN_GROUP("pwm1_0", mt7986_pwm1_0),
+ PINCTRL_PIN_GROUP("emmc_45", mt7986_emmc_45),
+ PINCTRL_PIN_GROUP("snfi", mt7986_snfi),
+ PINCTRL_PIN_GROUP("spi1_1", mt7986_spi1_1),
+ PINCTRL_PIN_GROUP("uart1_1", mt7986_uart1_1),
+ PINCTRL_PIN_GROUP("spi1_2", mt7986_spi1_2),
+ PINCTRL_PIN_GROUP("uart1_2", mt7986_uart1_2),
+ PINCTRL_PIN_GROUP("uart2_0", mt7986_uart2_0),
+ PINCTRL_PIN_GROUP("spi0", mt7986_spi0),
+ PINCTRL_PIN_GROUP("spi0_wp_hold", mt7986_spi0_wp_hold),
+ PINCTRL_PIN_GROUP("uart2_1", mt7986_uart2_1),
+ PINCTRL_PIN_GROUP("uart1_3_rx_tx", mt7986_uart1_3_rx_tx),
+ PINCTRL_PIN_GROUP("uart1_3_cts_rts", mt7986_uart1_3_cts_rts),
+ PINCTRL_PIN_GROUP("spi1_3", mt7986_spi1_3),
+ PINCTRL_PIN_GROUP("uart0", mt7986_uart0),
+ PINCTRL_PIN_GROUP("switch_int", mt7986_switch_int),
+ PINCTRL_PIN_GROUP("mdc_mdio", mt7986_mdc_mdio),
+ PINCTRL_PIN_GROUP("pcie_pereset", mt7986_pcie_reset),
+ PINCTRL_PIN_GROUP("uart1", mt7986_uart1),
+ PINCTRL_PIN_GROUP("uart2", mt7986_uart2),
+ PINCTRL_PIN_GROUP("emmc_51", mt7986_emmc_51),
+ PINCTRL_PIN_GROUP("pcm", mt7986_pcm),
+ PINCTRL_PIN_GROUP("i2s", mt7986_i2s),
+ PINCTRL_PIN_GROUP("wf_2g", mt7986_wf_2g),
+ PINCTRL_PIN_GROUP("wf_5g", mt7986_wf_5g),
+ PINCTRL_PIN_GROUP("wf_dbdc", mt7986_wf_dbdc),
+};
+
+/* Joint those groups owning the same capability in user point of view which
+ * allows that people tend to use through the device tree.
+ */
+
+static const char *mt7986_audio_groups[] = { "pcm", "i2s" };
+static const char *mt7986_emmc_groups[] = {
+ "emmc_45", "emmc_51", };
+static const char *mt7986_ethernet_groups[] = {
+ "switch_int", "mdc_mdio", };
+static const char *mt7986_i2c_groups[] = { "i2c", };
+static const char *mt7986_led_groups[] = { "wifi_led", };
+static const char *mt7986_flash_groups[] = { "snfi", };
+static const char *mt7986_pcie_groups[] = {
+ "pcie_clk", "pcie_wake", "pcie_pereset" };
+static const char *mt7986_pwm_groups[] = { "pwm0", "pwm1_0", "pwm1_1", };
+static const char *mt7986_spi_groups[] = {
+ "spi0", "spi0_wp_hold", "spi1_0", "spi1_1", "spi1_2", "spi1_3", };
+static const char *mt7986_uart_groups[] = {
+ "uart1_0", "uart1_1", "uart1_2", "uart1_3_rx_tx", "uart1_3_cts_rts",
+ "uart2_0", "uart2_1", "uart0", "uart1", "uart2",
+};
+static const char *mt7986_wdt_groups[] = { "watchdog", };
+static const char *mt7986_wf_groups[] = { "wf_2g", "wf_5g", "wf_dbdc", };
+
+static const struct function_desc mt7986_functions[] = {
+ {"audio", mt7986_audio_groups, ARRAY_SIZE(mt7986_audio_groups)},
+ {"emmc", mt7986_emmc_groups, ARRAY_SIZE(mt7986_emmc_groups)},
+ {"eth", mt7986_ethernet_groups, ARRAY_SIZE(mt7986_ethernet_groups)},
+ {"i2c", mt7986_i2c_groups, ARRAY_SIZE(mt7986_i2c_groups)},
+ {"led", mt7986_led_groups, ARRAY_SIZE(mt7986_led_groups)},
+ {"flash", mt7986_flash_groups, ARRAY_SIZE(mt7986_flash_groups)},
+ {"pcie", mt7986_pcie_groups, ARRAY_SIZE(mt7986_pcie_groups)},
+ {"pwm", mt7986_pwm_groups, ARRAY_SIZE(mt7986_pwm_groups)},
+ {"spi", mt7986_spi_groups, ARRAY_SIZE(mt7986_spi_groups)},
+ {"uart", mt7986_uart_groups, ARRAY_SIZE(mt7986_uart_groups)},
+ {"watchdog", mt7986_wdt_groups, ARRAY_SIZE(mt7986_wdt_groups)},
+ {"wifi", mt7986_wf_groups, ARRAY_SIZE(mt7986_wf_groups)},
+};
+
+static const struct mtk_eint_hw mt7986a_eint_hw = {
+ .port_mask = 7,
+ .ports = 7,
+ .ap_num = ARRAY_SIZE(mt7986a_pins),
+ .db_cnt = 16,
+};
+
+static const struct mtk_eint_hw mt7986b_eint_hw = {
+ .port_mask = 7,
+ .ports = 7,
+ .ap_num = ARRAY_SIZE(mt7986b_pins),
+ .db_cnt = 16,
+};
+
+static struct mtk_pin_soc mt7986a_data = {
+ .reg_cal = mt7986_reg_cals,
+ .pins = mt7986a_pins,
+ .npins = ARRAY_SIZE(mt7986a_pins),
+ .grps = mt7986_groups,
+ .ngrps = ARRAY_SIZE(mt7986_groups),
+ .funcs = mt7986_functions,
+ .nfuncs = ARRAY_SIZE(mt7986_functions),
+ .eint_hw = &mt7986a_eint_hw,
+ .gpio_m = 0,
+ .ies_present = false,
+ .base_names = mt7986_pinctrl_register_base_names,
+ .nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names),
+ .bias_set_combo = mtk_pinconf_bias_set_combo,
+ .bias_get_combo = mtk_pinconf_bias_get_combo,
+ .drive_set = mtk_pinconf_drive_set_rev1,
+ .drive_get = mtk_pinconf_drive_get_rev1,
+ .adv_pull_get = mtk_pinconf_adv_pull_get,
+ .adv_pull_set = mtk_pinconf_adv_pull_set,
+};
+
+static struct mtk_pin_soc mt7986b_data = {
+ .reg_cal = mt7986_reg_cals,
+ .pins = mt7986b_pins,
+ .npins = ARRAY_SIZE(mt7986b_pins),
+ .grps = mt7986_groups,
+ .ngrps = ARRAY_SIZE(mt7986_groups),
+ .funcs = mt7986_functions,
+ .nfuncs = ARRAY_SIZE(mt7986_functions),
+ .eint_hw = &mt7986b_eint_hw,
+ .gpio_m = 0,
+ .ies_present = false,
+ .base_names = mt7986_pinctrl_register_base_names,
+ .nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names),
+ .bias_set_combo = mtk_pinconf_bias_set_combo,
+ .bias_get_combo = mtk_pinconf_bias_get_combo,
+ .drive_set = mtk_pinconf_drive_set_rev1,
+ .drive_get = mtk_pinconf_drive_get_rev1,
+ .adv_pull_get = mtk_pinconf_adv_pull_get,
+ .adv_pull_set = mtk_pinconf_adv_pull_set,
+};
+
+static const struct of_device_id mt7986a_pinctrl_of_match[] = {
+ {.compatible = "mediatek,mt7986a-pinctrl",},
+ {}
+};
+
+static const struct of_device_id mt7986b_pinctrl_of_match[] = {
+ {.compatible = "mediatek,mt7986b-pinctrl",},
+ {}
+};
+
+static int mt7986a_pinctrl_probe(struct platform_device *pdev)
+{
+ return mtk_moore_pinctrl_probe(pdev, &mt7986a_data);
+}
+
+static int mt7986b_pinctrl_probe(struct platform_device *pdev)
+{
+ return mtk_moore_pinctrl_probe(pdev, &mt7986b_data);
+}
+
+static struct platform_driver mt7986a_pinctrl_driver = {
+ .driver = {
+ .name = "mt7986a-pinctrl",
+ .of_match_table = mt7986a_pinctrl_of_match,
+ },
+ .probe = mt7986a_pinctrl_probe,
+};
+
+static struct platform_driver mt7986b_pinctrl_driver = {
+ .driver = {
+ .name = "mt7986b-pinctrl",
+ .of_match_table = mt7986b_pinctrl_of_match,
+ },
+ .probe = mt7986b_pinctrl_probe,
+};
+
+static int __init mt7986a_pinctrl_init(void)
+{
+ return platform_driver_register(&mt7986a_pinctrl_driver);
+}
+
+static int __init mt7986b_pinctrl_init(void)
+{
+ return platform_driver_register(&mt7986b_pinctrl_driver);
+}
+
+arch_initcall(mt7986a_pinctrl_init);
+arch_initcall(mt7986b_pinctrl_init);
--
2.29.2
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 2/4] pinctrl: mediatek: add support for MT7986 SoC
@ 2021-10-14 7:58 ` Sam Shih
0 siblings, 0 replies; 21+ messages in thread
From: Sam Shih @ 2021-10-14 7:58 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Matthias Brugger, Sean Wang,
linux-gpio, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel
Cc: John Crispin, Ryder Lee, Sam Shih
This commit includes pinctrl driver for Mediatek MT7986
The difference of pinctrl between mt7986a and mt7986b
is that pin-41 to pin-65 do not exist on mt7986b
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
v7: updated register base binding and separate pinctrl part into a
single patch series
v4: fixed warning in mt7986 pinctrl driver
v3: applied the comment suggested by reviewers:
- merge the consecutive entries into one to reduce the table size
- set .name to NULL to indicate the pin is not ball out
v2: applied the comment suggested by reviewers:
- for the pins not ballout, we can fill .name in struct mtk_pin_desc
as NULL and return -ENOTSUPP in gpio/pinconf ops.
---
drivers/pinctrl/mediatek/Kconfig | 7 +
drivers/pinctrl/mediatek/Makefile | 1 +
drivers/pinctrl/mediatek/pinctrl-mt7986.c | 927 ++++++++++++++++++++++
3 files changed, 935 insertions(+)
create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7986.c
diff --git a/drivers/pinctrl/mediatek/Kconfig b/drivers/pinctrl/mediatek/Kconfig
index 7040a7a7bd5d..66db4ac5d169 100644
--- a/drivers/pinctrl/mediatek/Kconfig
+++ b/drivers/pinctrl/mediatek/Kconfig
@@ -119,6 +119,13 @@ config PINCTRL_MT7622
default ARM64 && ARCH_MEDIATEK
select PINCTRL_MTK_MOORE
+config PINCTRL_MT7986
+ bool "Mediatek MT7986 pin control"
+ depends on OF
+ depends on ARM64 || COMPILE_TEST
+ default ARM64 && ARCH_MEDIATEK
+ select PINCTRL_MTK_MOORE
+
config PINCTRL_MT8167
bool "Mediatek MT8167 pin control"
depends on OF
diff --git a/drivers/pinctrl/mediatek/Makefile b/drivers/pinctrl/mediatek/Makefile
index 1bb7f9c65bc2..1e3931d924e7 100644
--- a/drivers/pinctrl/mediatek/Makefile
+++ b/drivers/pinctrl/mediatek/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_PINCTRL_MT6797) += pinctrl-mt6797.o
obj-$(CONFIG_PINCTRL_MT7622) += pinctrl-mt7622.o
obj-$(CONFIG_PINCTRL_MT7623) += pinctrl-mt7623.o
obj-$(CONFIG_PINCTRL_MT7629) += pinctrl-mt7629.o
+obj-$(CONFIG_PINCTRL_MT7986) += pinctrl-mt7986.o
obj-$(CONFIG_PINCTRL_MT8167) += pinctrl-mt8167.o
obj-$(CONFIG_PINCTRL_MT8173) += pinctrl-mt8173.o
obj-$(CONFIG_PINCTRL_MT8183) += pinctrl-mt8183.o
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7986.c b/drivers/pinctrl/mediatek/pinctrl-mt7986.c
new file mode 100644
index 000000000000..f26869f1a367
--- /dev/null
+++ b/drivers/pinctrl/mediatek/pinctrl-mt7986.c
@@ -0,0 +1,927 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The MT7986 driver based on Linux generic pinctrl binding.
+ *
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ */
+
+#include "pinctrl-moore.h"
+
+#define MT7986_PIN(_number, _name) MTK_PIN(_number, _name, 0, _number, DRV_GRP4)
+#define MT7986_NOT_BALLOUT_PIN(_number) { .number = _number, .name = NULL }
+
+#define PIN_FIELD_BASE(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, \
+ _x_bits) \
+ PIN_FIELD_CALC(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, \
+ _x_bits, 32, 0)
+
+/**
+ * enum - Locking variants of the iocfg bases
+ *
+ * MT7986 have multiple bases to program pin configuration listed as the below:
+ * iocfg_rt:0x11c30000, iocfg_rb:0x11c40000, iocfg_lt:0x11e20000,
+ * iocfg_lb:0x11e30000, iocfg_tr:0x11f00000, iocfg_tl:0x11f10000,
+ * _i_based could be used to indicate what base the pin should be mapped into.
+ *
+ * Each iocfg register base control different group of pads on the SoC
+ *
+ *
+ * chip carrier
+ *
+ * A B C D E F G H
+ * +------------------------+
+ * 8 | o o o o o o o o |
+ * 7 | o o o o o o o o |
+ * 6 | o o o o o o o o |
+ * 5 | o o o o o o o o |
+ * 4 | o o o o o o o o |
+ * 3 | o o o o o o o o |
+ * 2 | o o o o o o o o |
+ * 1 | o o o o o o o o |
+ * +------------------------+
+ *
+ * inside Chip carrier
+ *
+ * A B C D E F G H
+ * +------------------------+
+ * 8 | |
+ * 7 | TL TR |
+ * 6 | +---------+ |
+ * 5 | LT | | RT |
+ * 4 | | | |
+ * 3 | LB | | RB |
+ * 2 | +---------+ |
+ * 1 | |
+ * +------------------------+
+ *
+ */
+
+enum {
+ GPIO_BASE,
+ IOCFG_RT_BASE,
+ IOCFG_RB_BASE,
+ IOCFG_LT_BASE,
+ IOCFG_LB_BASE,
+ IOCFG_TR_BASE,
+ IOCFG_TL_BASE,
+};
+
+static const char *const mt7986_pinctrl_register_base_names[] = {
+ "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt", "iocfg_lb", "iocfg_tr",
+ "iocfg_tl",
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_mode_range[] = {
+ PIN_FIELD(0, 100, 0x300, 0x10, 0, 4),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_dir_range[] = {
+ PIN_FIELD(0, 100, 0x0, 0x10, 0, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_di_range[] = {
+ PIN_FIELD(0, 100, 0x200, 0x10, 0, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_do_range[] = {
+ PIN_FIELD(0, 100, 0x100, 0x10, 0, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_ies_range[] = {
+ PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x40, 0x10, 17, 1),
+ PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x20, 0x10, 10, 1),
+ PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x20, 0x10, 0, 1),
+ PIN_FIELD_BASE(5, 6, IOCFG_RB_BASE, 0x40, 0x10, 0, 1),
+ PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x20, 0x10, 0, 1),
+ PIN_FIELD_BASE(11, 14, IOCFG_RB_BASE, 0x40, 0x10, 8, 1),
+ PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0x40, 0x10, 2, 1),
+ PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0x30, 0x10, 12, 1),
+ PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x30, 0x10, 18, 1),
+ PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x30, 0x10, 17, 1),
+ PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0x30, 0x10, 15, 1),
+ PIN_FIELD_BASE(28, 29, IOCFG_RT_BASE, 0x30, 0x10, 19, 1),
+ PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x30, 0x10, 23, 1),
+ PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x30, 0x10, 22, 1),
+ PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x30, 0x10, 21, 1),
+ PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x20, 0x10, 4, 1),
+ PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x20, 0x10, 8, 1),
+ PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x20, 0x10, 7, 1),
+ PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x20, 0x10, 5, 1),
+ PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x20, 0x10, 9, 1),
+ PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0x40, 0x10, 18, 1),
+ PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x40, 0x10, 12, 1),
+ PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x40, 0x10, 22, 1),
+ PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x40, 0x10, 20, 1),
+ PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x40, 0x10, 26, 1),
+ PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x40, 0x10, 24, 1),
+ PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x30, 0x10, 2, 1),
+ PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x30, 0x10, 1, 1),
+ PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x30, 0x10, 0, 1),
+ PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0x30, 0x10, 10, 1),
+ PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x40, 0x10, 15, 1),
+ PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x40, 0x10, 14, 1),
+ PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x40, 0x10, 13, 1),
+ PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x40, 0x10, 16, 1),
+ PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x20, 0x10, 2, 1),
+ PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x30, 0x10, 1, 1),
+ PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x30, 0x10, 0, 1),
+ PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x30, 0x10, 16, 1),
+ PIN_FIELD_BASE(72, 73, IOCFG_TR_BASE, 0x30, 0x10, 14, 1),
+ PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x30, 0x10, 4, 1),
+ PIN_FIELD_BASE(75, 77, IOCFG_TR_BASE, 0x30, 0x10, 6, 1),
+ PIN_FIELD_BASE(78, 79, IOCFG_TR_BASE, 0x30, 0x10, 2, 1),
+ PIN_FIELD_BASE(80, 84, IOCFG_TR_BASE, 0x30, 0x10, 9, 1),
+ PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x30, 0x10, 5, 1),
+ PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x30, 0x10, 1, 1),
+ PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x30, 0x10, 0, 1),
+ PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x30, 0x10, 14, 1),
+ PIN_FIELD_BASE(89, 90, IOCFG_TL_BASE, 0x30, 0x10, 12, 1),
+ PIN_FIELD_BASE(91, 94, IOCFG_TL_BASE, 0x30, 0x10, 4, 1),
+ PIN_FIELD_BASE(95, 96, IOCFG_TL_BASE, 0x30, 0x10, 2, 1),
+ PIN_FIELD_BASE(97, 100, IOCFG_TL_BASE, 0x30, 0x10, 8, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_smt_range[] = {
+ PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0xf0, 0x10, 17, 1),
+ PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x90, 0x10, 10, 1),
+ PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x90, 0x10, 0, 1),
+ PIN_FIELD_BASE(5, 6, IOCFG_RB_BASE, 0xf0, 0x10, 0, 1),
+ PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x90, 0x10, 0, 1),
+ PIN_FIELD_BASE(11, 14, IOCFG_RB_BASE, 0xf0, 0x10, 8, 1),
+ PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0xf0, 0x10, 2, 1),
+ PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0xc0, 0x10, 12, 1),
+ PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0xc0, 0x10, 18, 1),
+ PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0xc0, 0x10, 17, 1),
+ PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0xc0, 0x10, 15, 1),
+ PIN_FIELD_BASE(28, 29, IOCFG_RT_BASE, 0xc0, 0x10, 19, 1),
+ PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0xc0, 0x10, 23, 1),
+ PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0xc0, 0x10, 22, 1),
+ PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0xc0, 0x10, 21, 1),
+ PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x90, 0x10, 4, 1),
+ PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x90, 0x10, 8, 1),
+ PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x90, 0x10, 7, 1),
+ PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x90, 0x10, 5, 1),
+ PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x90, 0x10, 9, 1),
+ PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0xf0, 0x10, 18, 1),
+ PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0xf0, 0x10, 12, 1),
+ PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0xf0, 0x10, 22, 1),
+ PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0xf0, 0x10, 20, 1),
+ PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0xf0, 0x10, 26, 1),
+ PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0xf0, 0x10, 24, 1),
+ PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0xc0, 0x10, 2, 1),
+ PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0xc0, 0x10, 1, 1),
+ PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0xc0, 0x10, 0, 1),
+ PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0xc0, 0x10, 10, 1),
+ PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0xf0, 0x10, 15, 1),
+ PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0xf0, 0x10, 14, 1),
+ PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0xf0, 0x10, 13, 1),
+ PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0xf0, 0x10, 16, 1),
+ PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x90, 0x10, 2, 1),
+ PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x80, 0x10, 1, 1),
+ PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x80, 0x10, 0, 1),
+ PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x80, 0x10, 16, 1),
+ PIN_FIELD_BASE(72, 73, IOCFG_TR_BASE, 0x80, 0x10, 14, 1),
+ PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x80, 0x10, 4, 1),
+ PIN_FIELD_BASE(75, 77, IOCFG_TR_BASE, 0x80, 0x10, 6, 1),
+ PIN_FIELD_BASE(78, 79, IOCFG_TR_BASE, 0x80, 0x10, 2, 1),
+ PIN_FIELD_BASE(80, 84, IOCFG_TR_BASE, 0x80, 0x10, 9, 1),
+ PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x80, 0x10, 5, 1),
+ PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x70, 0x10, 1, 1),
+ PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x70, 0x10, 0, 1),
+ PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x70, 0x10, 14, 1),
+ PIN_FIELD_BASE(89, 90, IOCFG_TL_BASE, 0x70, 0x10, 12, 1),
+ PIN_FIELD_BASE(91, 94, IOCFG_TL_BASE, 0x70, 0x10, 4, 1),
+ PIN_FIELD_BASE(95, 96, IOCFG_TL_BASE, 0x70, 0x10, 2, 1),
+ PIN_FIELD_BASE(97, 100, IOCFG_TL_BASE, 0x70, 0x10, 8, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_pu_range[] = {
+ PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x50, 0x10, 1, 1),
+ PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x50, 0x10, 0, 1),
+ PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x50, 0x10, 16, 1),
+ PIN_FIELD_BASE(72, 73, IOCFG_TR_BASE, 0x50, 0x10, 14, 1),
+ PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x50, 0x10, 4, 1),
+ PIN_FIELD_BASE(75, 77, IOCFG_TR_BASE, 0x50, 0x10, 6, 1),
+ PIN_FIELD_BASE(78, 79, IOCFG_TR_BASE, 0x50, 0x10, 2, 1),
+ PIN_FIELD_BASE(80, 84, IOCFG_TR_BASE, 0x50, 0x10, 9, 1),
+ PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x50, 0x10, 5, 1),
+ PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x50, 0x10, 1, 1),
+ PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x50, 0x10, 0, 1),
+ PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x50, 0x10, 14, 1),
+ PIN_FIELD_BASE(89, 90, IOCFG_TL_BASE, 0x50, 0x10, 12, 1),
+ PIN_FIELD_BASE(91, 94, IOCFG_TL_BASE, 0x50, 0x10, 4, 1),
+ PIN_FIELD_BASE(95, 96, IOCFG_TL_BASE, 0x50, 0x10, 2, 1),
+ PIN_FIELD_BASE(97, 100, IOCFG_TL_BASE, 0x50, 0x10, 8, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_pd_range[] = {
+ PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x40, 0x10, 1, 1),
+ PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x40, 0x10, 0, 1),
+ PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x40, 0x10, 16, 1),
+ PIN_FIELD_BASE(72, 73, IOCFG_TR_BASE, 0x40, 0x10, 14, 1),
+ PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x40, 0x10, 4, 1),
+ PIN_FIELD_BASE(75, 77, IOCFG_TR_BASE, 0x40, 0x10, 6, 1),
+ PIN_FIELD_BASE(78, 79, IOCFG_TR_BASE, 0x40, 0x10, 2, 1),
+ PIN_FIELD_BASE(80, 84, IOCFG_TR_BASE, 0x40, 0x10, 9, 1),
+ PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x40, 0x10, 5, 1),
+ PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x40, 0x10, 1, 1),
+ PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x40, 0x10, 0, 1),
+ PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x40, 0x10, 14, 1),
+ PIN_FIELD_BASE(89, 90, IOCFG_TL_BASE, 0x40, 0x10, 12, 1),
+ PIN_FIELD_BASE(91, 94, IOCFG_TL_BASE, 0x40, 0x10, 4, 1),
+ PIN_FIELD_BASE(95, 96, IOCFG_TL_BASE, 0x40, 0x10, 2, 1),
+ PIN_FIELD_BASE(97, 100, IOCFG_TL_BASE, 0x40, 0x10, 8, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_drv_range[] = {
+ PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x10, 0x10, 21, 3),
+ PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x10, 0x10, 0, 3),
+ PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x00, 0x10, 0, 1),
+ PIN_FIELD_BASE(5, 5, IOCFG_RB_BASE, 0x00, 0x10, 0, 3),
+ PIN_FIELD_BASE(6, 6, IOCFG_RB_BASE, 0x00, 0x10, 21, 3),
+ PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x00, 0x10, 0, 3),
+ PIN_FIELD_BASE(11, 12, IOCFG_RB_BASE, 0x00, 0x10, 24, 3),
+ PIN_FIELD_BASE(13, 14, IOCFG_RB_BASE, 0x10, 0x10, 0, 3),
+ PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0x00, 0x10, 3, 3),
+ PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0x10, 0x10, 6, 3),
+ PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x10, 0x10, 24, 3),
+ PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x10, 0x10, 21, 3),
+ PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0x10, 0x10, 15, 3),
+ PIN_FIELD_BASE(28, 28, IOCFG_RT_BASE, 0x10, 0x10, 27, 3),
+ PIN_FIELD_BASE(29, 29, IOCFG_RT_BASE, 0x20, 0x10, 0, 3),
+ PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x20, 0x10, 9, 3),
+ PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x20, 0x10, 6, 3),
+ PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x20, 0x10, 3, 3),
+ PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x00, 0x10, 12, 3),
+ PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x00, 0x10, 24, 3),
+ PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x00, 0x10, 21, 3),
+ PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x00, 0x10, 15, 3),
+ PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x00, 0x10, 27, 3),
+ PIN_FIELD_BASE(39, 39, IOCFG_RB_BASE, 0x10, 0x10, 27, 3),
+ PIN_FIELD_BASE(40, 40, IOCFG_RB_BASE, 0x20, 0x10, 0, 3),
+ PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x10, 0x10, 6, 3),
+ PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x20, 0x10, 9, 3),
+ PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x20, 0x10, 3, 3),
+ PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x20, 0x10, 21, 3),
+ PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x20, 0x10, 15, 3),
+ PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x00, 0x10, 6, 3),
+ PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x00, 0x10, 3, 3),
+ PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x00, 0x10, 0, 3),
+ PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0x10, 0x10, 0, 3),
+ PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x10, 0x10, 15, 3),
+ PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x10, 0x10, 12, 3),
+ PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x10, 0x10, 9, 3),
+ PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x10, 0x10, 18, 3),
+ PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x00, 0x10, 2, 3),
+ PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x00, 0x10, 3, 3),
+ PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x00, 0x10, 0, 3),
+ PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x10, 0x10, 18, 3),
+ PIN_FIELD_BASE(72, 73, IOCFG_TR_BASE, 0x10, 0x10, 12, 3),
+ PIN_FIELD_BASE(74, 77, IOCFG_TR_BASE, 0x00, 0x10, 15, 3),
+ PIN_FIELD_BASE(78, 79, IOCFG_TR_BASE, 0x00, 0x10, 6, 3),
+ PIN_FIELD_BASE(80, 80, IOCFG_TR_BASE, 0x00, 0x10, 27, 3),
+ PIN_FIELD_BASE(81, 84, IOCFG_TR_BASE, 0x10, 0x10, 0, 3),
+ PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x00, 0x10, 12, 3),
+ PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x00, 0x10, 3, 3),
+ PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x00, 0x10, 0, 3),
+ PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x10, 0x10, 12, 3),
+ PIN_FIELD_BASE(89, 90, IOCFG_TL_BASE, 0x10, 0x10, 6, 3),
+ PIN_FIELD_BASE(91, 94, IOCFG_TL_BASE, 0x00, 0x10, 12, 3),
+ PIN_FIELD_BASE(95, 96, IOCFG_TL_BASE, 0x00, 0x10, 6, 3),
+ PIN_FIELD_BASE(97, 98, IOCFG_TL_BASE, 0x00, 0x10, 24, 3),
+ PIN_FIELD_BASE(99, 100, IOCFG_TL_BASE, 0x10, 0x10, 2, 3),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_pupd_range[] = {
+ PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x60, 0x10, 17, 1),
+ PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x30, 0x10, 10, 1),
+ PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x40, 0x10, 0, 1),
+ PIN_FIELD_BASE(5, 6, IOCFG_RB_BASE, 0x60, 0x10, 0, 1),
+ PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x30, 0x10, 0, 1),
+ PIN_FIELD_BASE(11, 14, IOCFG_RB_BASE, 0x60, 0x10, 8, 1),
+ PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0x60, 0x10, 2, 1),
+ PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0x40, 0x10, 12, 1),
+ PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x40, 0x10, 18, 1),
+ PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x40, 0x10, 17, 1),
+ PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0x40, 0x10, 15, 1),
+ PIN_FIELD_BASE(28, 29, IOCFG_RT_BASE, 0x40, 0x10, 19, 1),
+ PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x40, 0x10, 23, 1),
+ PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x40, 0x10, 22, 1),
+ PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x40, 0x10, 21, 1),
+ PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x30, 0x10, 4, 1),
+ PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x30, 0x10, 8, 1),
+ PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x30, 0x10, 7, 1),
+ PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x30, 0x10, 5, 1),
+ PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x30, 0x10, 9, 1),
+ PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0x60, 0x10, 18, 1),
+ PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x60, 0x10, 12, 1),
+ PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x60, 0x10, 22, 1),
+ PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x60, 0x10, 20, 1),
+ PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x60, 0x10, 26, 1),
+ PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x60, 0x10, 24, 1),
+ PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x40, 0x10, 2, 1),
+ PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x40, 0x10, 1, 1),
+ PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x40, 0x10, 0, 1),
+ PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0x40, 0x10, 10, 1),
+ PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x60, 0x10, 15, 1),
+ PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x60, 0x10, 14, 1),
+ PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x60, 0x10, 13, 1),
+ PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x60, 0x10, 16, 1),
+ PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x40, 0x10, 2, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_r0_range[] = {
+ PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x70, 0x10, 17, 1),
+ PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x40, 0x10, 10, 1),
+ PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x50, 0x10, 0, 1),
+ PIN_FIELD_BASE(5, 6, IOCFG_RB_BASE, 0x70, 0x10, 0, 1),
+ PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x40, 0x10, 0, 1),
+ PIN_FIELD_BASE(11, 14, IOCFG_RB_BASE, 0x70, 0x10, 8, 1),
+ PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0x70, 0x10, 2, 1),
+ PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0x50, 0x10, 12, 1),
+ PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x50, 0x10, 18, 1),
+ PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x50, 0x10, 17, 1),
+ PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0x50, 0x10, 15, 1),
+ PIN_FIELD_BASE(28, 29, IOCFG_RT_BASE, 0x50, 0x10, 19, 1),
+ PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x50, 0x10, 23, 1),
+ PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x50, 0x10, 22, 1),
+ PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x50, 0x10, 21, 1),
+ PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x40, 0x10, 4, 1),
+ PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x40, 0x10, 8, 1),
+ PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x40, 0x10, 7, 1),
+ PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x40, 0x10, 5, 1),
+ PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x40, 0x10, 9, 1),
+ PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0x70, 0x10, 18, 1),
+ PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x70, 0x10, 12, 1),
+ PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x70, 0x10, 22, 1),
+ PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x70, 0x10, 20, 1),
+ PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x70, 0x10, 26, 1),
+ PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x70, 0x10, 24, 1),
+ PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x50, 0x10, 2, 1),
+ PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x50, 0x10, 1, 1),
+ PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x50, 0x10, 0, 1),
+ PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0x50, 0x10, 10, 1),
+ PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x70, 0x10, 15, 1),
+ PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x70, 0x10, 14, 1),
+ PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x70, 0x10, 13, 1),
+ PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x70, 0x10, 16, 1),
+ PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x50, 0x10, 2, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_r1_range[] = {
+ PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x80, 0x10, 17, 1),
+ PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x50, 0x10, 10, 1),
+ PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x60, 0x10, 0, 1),
+ PIN_FIELD_BASE(5, 6, IOCFG_RB_BASE, 0x80, 0x10, 0, 1),
+ PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x50, 0x10, 0, 1),
+ PIN_FIELD_BASE(11, 14, IOCFG_RB_BASE, 0x80, 0x10, 8, 1),
+ PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0x80, 0x10, 2, 1),
+ PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0x60, 0x10, 12, 1),
+ PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x60, 0x10, 18, 1),
+ PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x60, 0x10, 17, 1),
+ PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0x60, 0x10, 15, 1),
+ PIN_FIELD_BASE(28, 29, IOCFG_RT_BASE, 0x60, 0x10, 19, 1),
+ PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x60, 0x10, 23, 1),
+ PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x60, 0x10, 22, 1),
+ PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x60, 0x10, 21, 1),
+ PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x50, 0x10, 4, 1),
+ PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x50, 0x10, 8, 1),
+ PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x50, 0x10, 7, 1),
+ PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x50, 0x10, 5, 1),
+ PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x50, 0x10, 9, 1),
+ PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0x80, 0x10, 18, 1),
+ PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x80, 0x10, 12, 1),
+ PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x80, 0x10, 22, 1),
+ PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x80, 0x10, 20, 1),
+ PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x80, 0x10, 26, 1),
+ PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x80, 0x10, 24, 1),
+ PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x60, 0x10, 2, 1),
+ PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x60, 0x10, 1, 1),
+ PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x60, 0x10, 0, 1),
+ PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0x60, 0x10, 10, 1),
+ PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x80, 0x10, 15, 1),
+ PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x80, 0x10, 14, 1),
+ PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x80, 0x10, 13, 1),
+ PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x80, 0x10, 16, 1),
+ PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x60, 0x10, 2, 1),
+};
+
+static const struct mtk_pin_reg_calc mt7986_reg_cals[] = {
+ [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt7986_pin_mode_range),
+ [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt7986_pin_dir_range),
+ [PINCTRL_PIN_REG_DI] = MTK_RANGE(mt7986_pin_di_range),
+ [PINCTRL_PIN_REG_DO] = MTK_RANGE(mt7986_pin_do_range),
+ [PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt7986_pin_smt_range),
+ [PINCTRL_PIN_REG_IES] = MTK_RANGE(mt7986_pin_ies_range),
+ [PINCTRL_PIN_REG_DRV] = MTK_RANGE(mt7986_pin_drv_range),
+ [PINCTRL_PIN_REG_PU] = MTK_RANGE(mt7986_pin_pu_range),
+ [PINCTRL_PIN_REG_PD] = MTK_RANGE(mt7986_pin_pd_range),
+ [PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt7986_pin_pupd_range),
+ [PINCTRL_PIN_REG_R0] = MTK_RANGE(mt7986_pin_r0_range),
+ [PINCTRL_PIN_REG_R1] = MTK_RANGE(mt7986_pin_r1_range),
+};
+
+static const struct mtk_pin_desc mt7986a_pins[] = {
+ MT7986_PIN(0, "SYS_WATCHDOG"),
+ MT7986_PIN(1, "WF2G_LED"),
+ MT7986_PIN(2, "WF5G_LED"),
+ MT7986_PIN(3, "I2C_SCL"),
+ MT7986_PIN(4, "I2C_SDA"),
+ MT7986_PIN(5, "GPIO_0"),
+ MT7986_PIN(6, "GPIO_1"),
+ MT7986_PIN(7, "GPIO_2"),
+ MT7986_PIN(8, "GPIO_3"),
+ MT7986_PIN(9, "GPIO_4"),
+ MT7986_PIN(10, "GPIO_5"),
+ MT7986_PIN(11, "GPIO_6"),
+ MT7986_PIN(12, "GPIO_7"),
+ MT7986_PIN(13, "GPIO_8"),
+ MT7986_PIN(14, "GPIO_9"),
+ MT7986_PIN(15, "GPIO_10"),
+ MT7986_PIN(16, "GPIO_11"),
+ MT7986_PIN(17, "GPIO_12"),
+ MT7986_PIN(18, "GPIO_13"),
+ MT7986_PIN(19, "GPIO_14"),
+ MT7986_PIN(20, "GPIO_15"),
+ MT7986_PIN(21, "PWM0"),
+ MT7986_PIN(22, "PWM1"),
+ MT7986_PIN(23, "SPI0_CLK"),
+ MT7986_PIN(24, "SPI0_MOSI"),
+ MT7986_PIN(25, "SPI0_MISO"),
+ MT7986_PIN(26, "SPI0_CS"),
+ MT7986_PIN(27, "SPI0_HOLD"),
+ MT7986_PIN(28, "SPI0_WP"),
+ MT7986_PIN(29, "SPI1_CLK"),
+ MT7986_PIN(30, "SPI1_MOSI"),
+ MT7986_PIN(31, "SPI1_MISO"),
+ MT7986_PIN(32, "SPI1_CS"),
+ MT7986_PIN(33, "SPI2_CLK"),
+ MT7986_PIN(34, "SPI2_MOSI"),
+ MT7986_PIN(35, "SPI2_MISO"),
+ MT7986_PIN(36, "SPI2_CS"),
+ MT7986_PIN(37, "SPI2_HOLD"),
+ MT7986_PIN(38, "SPI2_WP"),
+ MT7986_PIN(39, "UART0_RXD"),
+ MT7986_PIN(40, "UART0_TXD"),
+ MT7986_PIN(41, "PCIE_PERESET_N"),
+ MT7986_PIN(42, "UART1_RXD"),
+ MT7986_PIN(43, "UART1_TXD"),
+ MT7986_PIN(44, "UART1_CTS"),
+ MT7986_PIN(45, "UART1_RTS"),
+ MT7986_PIN(46, "UART2_RXD"),
+ MT7986_PIN(47, "UART2_TXD"),
+ MT7986_PIN(48, "UART2_CTS"),
+ MT7986_PIN(49, "UART2_RTS"),
+ MT7986_PIN(50, "EMMC_DATA_0"),
+ MT7986_PIN(51, "EMMC_DATA_1"),
+ MT7986_PIN(52, "EMMC_DATA_2"),
+ MT7986_PIN(53, "EMMC_DATA_3"),
+ MT7986_PIN(54, "EMMC_DATA_4"),
+ MT7986_PIN(55, "EMMC_DATA_5"),
+ MT7986_PIN(56, "EMMC_DATA_6"),
+ MT7986_PIN(57, "EMMC_DATA_7"),
+ MT7986_PIN(58, "EMMC_CMD"),
+ MT7986_PIN(59, "EMMC_CK"),
+ MT7986_PIN(60, "EMMC_DSL"),
+ MT7986_PIN(61, "EMMC_RSTB"),
+ MT7986_PIN(62, "PCM_DTX"),
+ MT7986_PIN(63, "PCM_DRX"),
+ MT7986_PIN(64, "PCM_CLK"),
+ MT7986_PIN(65, "PCM_FS"),
+ MT7986_PIN(66, "MT7531_INT"),
+ MT7986_PIN(67, "SMI_MDC"),
+ MT7986_PIN(68, "SMI_MDIO"),
+ MT7986_PIN(69, "WF0_DIG_RESETB"),
+ MT7986_PIN(70, "WF0_CBA_RESETB"),
+ MT7986_PIN(71, "WF0_XO_REQ"),
+ MT7986_PIN(72, "WF0_TOP_CLK"),
+ MT7986_PIN(73, "WF0_TOP_DATA"),
+ MT7986_PIN(74, "WF0_HB1"),
+ MT7986_PIN(75, "WF0_HB2"),
+ MT7986_PIN(76, "WF0_HB3"),
+ MT7986_PIN(77, "WF0_HB4"),
+ MT7986_PIN(78, "WF0_HB0"),
+ MT7986_PIN(79, "WF0_HB0_B"),
+ MT7986_PIN(80, "WF0_HB5"),
+ MT7986_PIN(81, "WF0_HB6"),
+ MT7986_PIN(82, "WF0_HB7"),
+ MT7986_PIN(83, "WF0_HB8"),
+ MT7986_PIN(84, "WF0_HB9"),
+ MT7986_PIN(85, "WF0_HB10"),
+ MT7986_PIN(86, "WF1_DIG_RESETB"),
+ MT7986_PIN(87, "WF1_CBA_RESETB"),
+ MT7986_PIN(88, "WF1_XO_REQ"),
+ MT7986_PIN(89, "WF1_TOP_CLK"),
+ MT7986_PIN(90, "WF1_TOP_DATA"),
+ MT7986_PIN(91, "WF1_HB1"),
+ MT7986_PIN(92, "WF1_HB2"),
+ MT7986_PIN(93, "WF1_HB3"),
+ MT7986_PIN(94, "WF1_HB4"),
+ MT7986_PIN(95, "WF1_HB0"),
+ MT7986_PIN(96, "WF1_HB0_B"),
+ MT7986_PIN(97, "WF1_HB5"),
+ MT7986_PIN(98, "WF1_HB6"),
+ MT7986_PIN(99, "WF1_HB7"),
+ MT7986_PIN(100, "WF1_HB8"),
+};
+
+static const struct mtk_pin_desc mt7986b_pins[] = {
+ MT7986_PIN(0, "SYS_WATCHDOG"),
+ MT7986_PIN(1, "WF2G_LED"),
+ MT7986_PIN(2, "WF5G_LED"),
+ MT7986_PIN(3, "I2C_SCL"),
+ MT7986_PIN(4, "I2C_SDA"),
+ MT7986_PIN(5, "GPIO_0"),
+ MT7986_PIN(6, "GPIO_1"),
+ MT7986_PIN(7, "GPIO_2"),
+ MT7986_PIN(8, "GPIO_3"),
+ MT7986_PIN(9, "GPIO_4"),
+ MT7986_PIN(10, "GPIO_5"),
+ MT7986_PIN(11, "GPIO_6"),
+ MT7986_PIN(12, "GPIO_7"),
+ MT7986_PIN(13, "GPIO_8"),
+ MT7986_PIN(14, "GPIO_9"),
+ MT7986_PIN(15, "GPIO_10"),
+ MT7986_PIN(16, "GPIO_11"),
+ MT7986_PIN(17, "GPIO_12"),
+ MT7986_PIN(18, "GPIO_13"),
+ MT7986_PIN(19, "GPIO_14"),
+ MT7986_PIN(20, "GPIO_15"),
+ MT7986_PIN(21, "PWM0"),
+ MT7986_PIN(22, "PWM1"),
+ MT7986_PIN(23, "SPI0_CLK"),
+ MT7986_PIN(24, "SPI0_MOSI"),
+ MT7986_PIN(25, "SPI0_MISO"),
+ MT7986_PIN(26, "SPI0_CS"),
+ MT7986_PIN(27, "SPI0_HOLD"),
+ MT7986_PIN(28, "SPI0_WP"),
+ MT7986_PIN(29, "SPI1_CLK"),
+ MT7986_PIN(30, "SPI1_MOSI"),
+ MT7986_PIN(31, "SPI1_MISO"),
+ MT7986_PIN(32, "SPI1_CS"),
+ MT7986_PIN(33, "SPI2_CLK"),
+ MT7986_PIN(34, "SPI2_MOSI"),
+ MT7986_PIN(35, "SPI2_MISO"),
+ MT7986_PIN(36, "SPI2_CS"),
+ MT7986_PIN(37, "SPI2_HOLD"),
+ MT7986_PIN(38, "SPI2_WP"),
+ MT7986_PIN(39, "UART0_RXD"),
+ MT7986_PIN(40, "UART0_TXD"),
+ MT7986_NOT_BALLOUT_PIN(41),
+ MT7986_NOT_BALLOUT_PIN(42),
+ MT7986_NOT_BALLOUT_PIN(43),
+ MT7986_NOT_BALLOUT_PIN(44),
+ MT7986_NOT_BALLOUT_PIN(45),
+ MT7986_NOT_BALLOUT_PIN(46),
+ MT7986_NOT_BALLOUT_PIN(47),
+ MT7986_NOT_BALLOUT_PIN(48),
+ MT7986_NOT_BALLOUT_PIN(49),
+ MT7986_NOT_BALLOUT_PIN(50),
+ MT7986_NOT_BALLOUT_PIN(51),
+ MT7986_NOT_BALLOUT_PIN(52),
+ MT7986_NOT_BALLOUT_PIN(53),
+ MT7986_NOT_BALLOUT_PIN(54),
+ MT7986_NOT_BALLOUT_PIN(55),
+ MT7986_NOT_BALLOUT_PIN(56),
+ MT7986_NOT_BALLOUT_PIN(57),
+ MT7986_NOT_BALLOUT_PIN(58),
+ MT7986_NOT_BALLOUT_PIN(59),
+ MT7986_NOT_BALLOUT_PIN(60),
+ MT7986_NOT_BALLOUT_PIN(61),
+ MT7986_NOT_BALLOUT_PIN(62),
+ MT7986_NOT_BALLOUT_PIN(63),
+ MT7986_NOT_BALLOUT_PIN(64),
+ MT7986_NOT_BALLOUT_PIN(65),
+ MT7986_PIN(66, "MT7531_INT"),
+ MT7986_PIN(67, "SMI_MDC"),
+ MT7986_PIN(68, "SMI_MDIO"),
+ MT7986_PIN(69, "WF0_DIG_RESETB"),
+ MT7986_PIN(70, "WF0_CBA_RESETB"),
+ MT7986_PIN(71, "WF0_XO_REQ"),
+ MT7986_PIN(72, "WF0_TOP_CLK"),
+ MT7986_PIN(73, "WF0_TOP_DATA"),
+ MT7986_PIN(74, "WF0_HB1"),
+ MT7986_PIN(75, "WF0_HB2"),
+ MT7986_PIN(76, "WF0_HB3"),
+ MT7986_PIN(77, "WF0_HB4"),
+ MT7986_PIN(78, "WF0_HB0"),
+ MT7986_PIN(79, "WF0_HB0_B"),
+ MT7986_PIN(80, "WF0_HB5"),
+ MT7986_PIN(81, "WF0_HB6"),
+ MT7986_PIN(82, "WF0_HB7"),
+ MT7986_PIN(83, "WF0_HB8"),
+ MT7986_PIN(84, "WF0_HB9"),
+ MT7986_PIN(85, "WF0_HB10"),
+ MT7986_PIN(86, "WF1_DIG_RESETB"),
+ MT7986_PIN(87, "WF1_CBA_RESETB"),
+ MT7986_PIN(88, "WF1_XO_REQ"),
+ MT7986_PIN(89, "WF1_TOP_CLK"),
+ MT7986_PIN(90, "WF1_TOP_DATA"),
+ MT7986_PIN(91, "WF1_HB1"),
+ MT7986_PIN(92, "WF1_HB2"),
+ MT7986_PIN(93, "WF1_HB3"),
+ MT7986_PIN(94, "WF1_HB4"),
+ MT7986_PIN(95, "WF1_HB0"),
+ MT7986_PIN(96, "WF1_HB0_B"),
+ MT7986_PIN(97, "WF1_HB5"),
+ MT7986_PIN(98, "WF1_HB6"),
+ MT7986_PIN(99, "WF1_HB7"),
+ MT7986_PIN(100, "WF1_HB8"),
+};
+
+/* List all groups consisting of these pins dedicated to the enablement of
+ * certain hardware block and the corresponding mode for all of the pins.
+ * The hardware probably has multiple combinations of these pinouts.
+ */
+
+static int mt7986_watchdog_pins[] = { 0, };
+static int mt7986_watchdog_funcs[] = { 1, };
+
+static int mt7986_wifi_led_pins[] = { 1, 2, };
+static int mt7986_wifi_led_funcs[] = { 1, 1, };
+
+static int mt7986_i2c_pins[] = { 3, 4, };
+static int mt7986_i2c_funcs[] = { 1, 1, };
+
+static int mt7986_uart1_0_pins[] = { 7, 8, 9, 10, };
+static int mt7986_uart1_0_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_spi1_0_pins[] = { 11, 12, 13, 14, };
+static int mt7986_spi1_0_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_pwm1_1_pins[] = { 20, };
+static int mt7986_pwm1_1_funcs[] = { 2, };
+
+static int mt7986_pwm0_pins[] = { 21, };
+static int mt7986_pwm0_funcs[] = { 1, };
+
+static int mt7986_pwm1_0_pins[] = { 22, };
+static int mt7986_pwm1_0_funcs[] = { 1, };
+
+static int mt7986_emmc_45_pins[] = {
+ 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, };
+static int mt7986_emmc_45_funcs[] = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, };
+
+static int mt7986_snfi_pins[] = { 23, 24, 25, 26, 27, 28, };
+static int mt7986_snfi_funcs[] = { 1, 1, 1, 1, 1, 1, };
+
+static int mt7986_spi1_1_pins[] = { 23, 24, 25, 26, };
+static int mt7986_spi1_1_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_uart1_1_pins[] = { 23, 24, 25, 26, };
+static int mt7986_uart1_1_funcs[] = { 4, 4, 4, 4, };
+
+static int mt7986_spi1_2_pins[] = { 29, 30, 31, 32, };
+static int mt7986_spi1_2_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_uart1_2_pins[] = { 29, 30, 31, 32, };
+static int mt7986_uart1_2_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_uart2_0_pins[] = { 29, 30, 31, 32, };
+static int mt7986_uart2_0_funcs[] = { 4, 4, 4, 4, };
+
+static int mt7986_spi0_pins[] = { 33, 34, 35, 36, };
+static int mt7986_spi0_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_spi0_wp_hold_pins[] = { 37, 38, };
+static int mt7986_spi0_wp_hold_funcs[] = { 1, 1, };
+
+static int mt7986_uart2_1_pins[] = { 33, 34, 35, 36, };
+static int mt7986_uart2_1_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_uart1_3_rx_tx_pins[] = { 35, 36, };
+static int mt7986_uart1_3_rx_tx_funcs[] = { 2, 2, };
+
+static int mt7986_uart1_3_cts_rts_pins[] = { 37, 38, };
+static int mt7986_uart1_3_cts_rts_funcs[] = { 2, 2, };
+
+static int mt7986_spi1_3_pins[] = { 33, 34, 35, 36, };
+static int mt7986_spi1_3_funcs[] = { 4, 4, 4, 4, };
+
+static int mt7986_uart0_pins[] = { 39, 40, };
+static int mt7986_uart0_funcs[] = { 1, 1, };
+
+static int mt7986_pcie_reset_pins[] = { 41, };
+static int mt7986_pcie_reset_funcs[] = { 1, };
+
+static int mt7986_uart1_pins[] = { 42, 43, 44, 45, };
+static int mt7986_uart1_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_uart2_pins[] = { 46, 47, 48, 49, };
+static int mt7986_uart2_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_emmc_51_pins[] = {
+ 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, };
+static int mt7986_emmc_51_funcs[] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, };
+
+static int mt7986_pcm_pins[] = { 62, 63, 64, 65, };
+static int mt7986_pcm_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_i2s_pins[] = { 62, 63, 64, 65, };
+static int mt7986_i2s_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_switch_int_pins[] = { 66, };
+static int mt7986_switch_int_funcs[] = { 1, };
+
+static int mt7986_mdc_mdio_pins[] = { 67, 68, };
+static int mt7986_mdc_mdio_funcs[] = { 1, 1, };
+
+static int mt7986_wf_2g_pins[] = {74, 75, 76, 77, 78, 79, 80, 81, 82, 83, };
+static int mt7986_wf_2g_funcs[] = {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, };
+
+static int mt7986_wf_5g_pins[] = {91, 92, 93, 94, 95, 96, 97, 98, 99, 100, };
+static int mt7986_wf_5g_funcs[] = {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, };
+
+static int mt7986_wf_dbdc_pins[] = {
+ 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, };
+static int mt7986_wf_dbdc_funcs[] = {
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, };
+
+static int mt7986_pcie_clk_pins[] = { 9, };
+static int mt7986_pcie_clk_funcs[] = { 1, };
+
+static int mt7986_pcie_wake_pins[] = { 10, };
+static int mt7986_pcie_wake_funcs[] = { 1, };
+
+static const struct group_desc mt7986_groups[] = {
+ PINCTRL_PIN_GROUP("watchdog", mt7986_watchdog),
+ PINCTRL_PIN_GROUP("wifi_led", mt7986_wifi_led),
+ PINCTRL_PIN_GROUP("i2c", mt7986_i2c),
+ PINCTRL_PIN_GROUP("uart1_0", mt7986_uart1_0),
+ PINCTRL_PIN_GROUP("pcie_clk", mt7986_pcie_clk),
+ PINCTRL_PIN_GROUP("pcie_wake", mt7986_pcie_wake),
+ PINCTRL_PIN_GROUP("spi1_0", mt7986_spi1_0),
+ PINCTRL_PIN_GROUP("pwm1_1", mt7986_pwm1_1),
+ PINCTRL_PIN_GROUP("pwm0", mt7986_pwm0),
+ PINCTRL_PIN_GROUP("pwm1_0", mt7986_pwm1_0),
+ PINCTRL_PIN_GROUP("emmc_45", mt7986_emmc_45),
+ PINCTRL_PIN_GROUP("snfi", mt7986_snfi),
+ PINCTRL_PIN_GROUP("spi1_1", mt7986_spi1_1),
+ PINCTRL_PIN_GROUP("uart1_1", mt7986_uart1_1),
+ PINCTRL_PIN_GROUP("spi1_2", mt7986_spi1_2),
+ PINCTRL_PIN_GROUP("uart1_2", mt7986_uart1_2),
+ PINCTRL_PIN_GROUP("uart2_0", mt7986_uart2_0),
+ PINCTRL_PIN_GROUP("spi0", mt7986_spi0),
+ PINCTRL_PIN_GROUP("spi0_wp_hold", mt7986_spi0_wp_hold),
+ PINCTRL_PIN_GROUP("uart2_1", mt7986_uart2_1),
+ PINCTRL_PIN_GROUP("uart1_3_rx_tx", mt7986_uart1_3_rx_tx),
+ PINCTRL_PIN_GROUP("uart1_3_cts_rts", mt7986_uart1_3_cts_rts),
+ PINCTRL_PIN_GROUP("spi1_3", mt7986_spi1_3),
+ PINCTRL_PIN_GROUP("uart0", mt7986_uart0),
+ PINCTRL_PIN_GROUP("switch_int", mt7986_switch_int),
+ PINCTRL_PIN_GROUP("mdc_mdio", mt7986_mdc_mdio),
+ PINCTRL_PIN_GROUP("pcie_pereset", mt7986_pcie_reset),
+ PINCTRL_PIN_GROUP("uart1", mt7986_uart1),
+ PINCTRL_PIN_GROUP("uart2", mt7986_uart2),
+ PINCTRL_PIN_GROUP("emmc_51", mt7986_emmc_51),
+ PINCTRL_PIN_GROUP("pcm", mt7986_pcm),
+ PINCTRL_PIN_GROUP("i2s", mt7986_i2s),
+ PINCTRL_PIN_GROUP("wf_2g", mt7986_wf_2g),
+ PINCTRL_PIN_GROUP("wf_5g", mt7986_wf_5g),
+ PINCTRL_PIN_GROUP("wf_dbdc", mt7986_wf_dbdc),
+};
+
+/* Joint those groups owning the same capability in user point of view which
+ * allows that people tend to use through the device tree.
+ */
+
+static const char *mt7986_audio_groups[] = { "pcm", "i2s" };
+static const char *mt7986_emmc_groups[] = {
+ "emmc_45", "emmc_51", };
+static const char *mt7986_ethernet_groups[] = {
+ "switch_int", "mdc_mdio", };
+static const char *mt7986_i2c_groups[] = { "i2c", };
+static const char *mt7986_led_groups[] = { "wifi_led", };
+static const char *mt7986_flash_groups[] = { "snfi", };
+static const char *mt7986_pcie_groups[] = {
+ "pcie_clk", "pcie_wake", "pcie_pereset" };
+static const char *mt7986_pwm_groups[] = { "pwm0", "pwm1_0", "pwm1_1", };
+static const char *mt7986_spi_groups[] = {
+ "spi0", "spi0_wp_hold", "spi1_0", "spi1_1", "spi1_2", "spi1_3", };
+static const char *mt7986_uart_groups[] = {
+ "uart1_0", "uart1_1", "uart1_2", "uart1_3_rx_tx", "uart1_3_cts_rts",
+ "uart2_0", "uart2_1", "uart0", "uart1", "uart2",
+};
+static const char *mt7986_wdt_groups[] = { "watchdog", };
+static const char *mt7986_wf_groups[] = { "wf_2g", "wf_5g", "wf_dbdc", };
+
+static const struct function_desc mt7986_functions[] = {
+ {"audio", mt7986_audio_groups, ARRAY_SIZE(mt7986_audio_groups)},
+ {"emmc", mt7986_emmc_groups, ARRAY_SIZE(mt7986_emmc_groups)},
+ {"eth", mt7986_ethernet_groups, ARRAY_SIZE(mt7986_ethernet_groups)},
+ {"i2c", mt7986_i2c_groups, ARRAY_SIZE(mt7986_i2c_groups)},
+ {"led", mt7986_led_groups, ARRAY_SIZE(mt7986_led_groups)},
+ {"flash", mt7986_flash_groups, ARRAY_SIZE(mt7986_flash_groups)},
+ {"pcie", mt7986_pcie_groups, ARRAY_SIZE(mt7986_pcie_groups)},
+ {"pwm", mt7986_pwm_groups, ARRAY_SIZE(mt7986_pwm_groups)},
+ {"spi", mt7986_spi_groups, ARRAY_SIZE(mt7986_spi_groups)},
+ {"uart", mt7986_uart_groups, ARRAY_SIZE(mt7986_uart_groups)},
+ {"watchdog", mt7986_wdt_groups, ARRAY_SIZE(mt7986_wdt_groups)},
+ {"wifi", mt7986_wf_groups, ARRAY_SIZE(mt7986_wf_groups)},
+};
+
+static const struct mtk_eint_hw mt7986a_eint_hw = {
+ .port_mask = 7,
+ .ports = 7,
+ .ap_num = ARRAY_SIZE(mt7986a_pins),
+ .db_cnt = 16,
+};
+
+static const struct mtk_eint_hw mt7986b_eint_hw = {
+ .port_mask = 7,
+ .ports = 7,
+ .ap_num = ARRAY_SIZE(mt7986b_pins),
+ .db_cnt = 16,
+};
+
+static struct mtk_pin_soc mt7986a_data = {
+ .reg_cal = mt7986_reg_cals,
+ .pins = mt7986a_pins,
+ .npins = ARRAY_SIZE(mt7986a_pins),
+ .grps = mt7986_groups,
+ .ngrps = ARRAY_SIZE(mt7986_groups),
+ .funcs = mt7986_functions,
+ .nfuncs = ARRAY_SIZE(mt7986_functions),
+ .eint_hw = &mt7986a_eint_hw,
+ .gpio_m = 0,
+ .ies_present = false,
+ .base_names = mt7986_pinctrl_register_base_names,
+ .nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names),
+ .bias_set_combo = mtk_pinconf_bias_set_combo,
+ .bias_get_combo = mtk_pinconf_bias_get_combo,
+ .drive_set = mtk_pinconf_drive_set_rev1,
+ .drive_get = mtk_pinconf_drive_get_rev1,
+ .adv_pull_get = mtk_pinconf_adv_pull_get,
+ .adv_pull_set = mtk_pinconf_adv_pull_set,
+};
+
+static struct mtk_pin_soc mt7986b_data = {
+ .reg_cal = mt7986_reg_cals,
+ .pins = mt7986b_pins,
+ .npins = ARRAY_SIZE(mt7986b_pins),
+ .grps = mt7986_groups,
+ .ngrps = ARRAY_SIZE(mt7986_groups),
+ .funcs = mt7986_functions,
+ .nfuncs = ARRAY_SIZE(mt7986_functions),
+ .eint_hw = &mt7986b_eint_hw,
+ .gpio_m = 0,
+ .ies_present = false,
+ .base_names = mt7986_pinctrl_register_base_names,
+ .nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names),
+ .bias_set_combo = mtk_pinconf_bias_set_combo,
+ .bias_get_combo = mtk_pinconf_bias_get_combo,
+ .drive_set = mtk_pinconf_drive_set_rev1,
+ .drive_get = mtk_pinconf_drive_get_rev1,
+ .adv_pull_get = mtk_pinconf_adv_pull_get,
+ .adv_pull_set = mtk_pinconf_adv_pull_set,
+};
+
+static const struct of_device_id mt7986a_pinctrl_of_match[] = {
+ {.compatible = "mediatek,mt7986a-pinctrl",},
+ {}
+};
+
+static const struct of_device_id mt7986b_pinctrl_of_match[] = {
+ {.compatible = "mediatek,mt7986b-pinctrl",},
+ {}
+};
+
+static int mt7986a_pinctrl_probe(struct platform_device *pdev)
+{
+ return mtk_moore_pinctrl_probe(pdev, &mt7986a_data);
+}
+
+static int mt7986b_pinctrl_probe(struct platform_device *pdev)
+{
+ return mtk_moore_pinctrl_probe(pdev, &mt7986b_data);
+}
+
+static struct platform_driver mt7986a_pinctrl_driver = {
+ .driver = {
+ .name = "mt7986a-pinctrl",
+ .of_match_table = mt7986a_pinctrl_of_match,
+ },
+ .probe = mt7986a_pinctrl_probe,
+};
+
+static struct platform_driver mt7986b_pinctrl_driver = {
+ .driver = {
+ .name = "mt7986b-pinctrl",
+ .of_match_table = mt7986b_pinctrl_of_match,
+ },
+ .probe = mt7986b_pinctrl_probe,
+};
+
+static int __init mt7986a_pinctrl_init(void)
+{
+ return platform_driver_register(&mt7986a_pinctrl_driver);
+}
+
+static int __init mt7986b_pinctrl_init(void)
+{
+ return platform_driver_register(&mt7986b_pinctrl_driver);
+}
+
+arch_initcall(mt7986a_pinctrl_init);
+arch_initcall(mt7986b_pinctrl_init);
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 3/4] arm64: dts: mediatek: add pinctrl support for mt7986a
2021-10-14 7:58 ` Sam Shih
(?)
@ 2021-10-14 7:58 ` Sam Shih
-1 siblings, 0 replies; 21+ messages in thread
From: Sam Shih @ 2021-10-14 7:58 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Matthias Brugger, Sean Wang,
linux-gpio, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel
Cc: John Crispin, Ryder Lee, Sam Shih
Add mt7986a pinctrl node, and update pinmux setting for mt7986a
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 20 +++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 21 ++++++++++++++++++++
2 files changed, 41 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index 5348fc427463..0a54b1ed4fce 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -26,9 +26,29 @@ &uart0 {
};
&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
status = "okay";
};
&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
status = "okay";
};
+
+&pio {
+ uart1_pins: uart1-pins {
+ mux {
+ function = "uart";
+ groups = "uart1";
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ mux {
+ function = "uart";
+ groups = "uart2";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index a8cf0eb79688..c59a27aa86e2 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -128,6 +128,27 @@ apmixedsys: apmixedsys@1001e000 {
#clock-cells = <1>;
};
+ pio: pinctrl@1001f000 {
+ compatible = "mediatek,mt7986a-pinctrl";
+ reg = <0 0x1001f000 0 0x1000>,
+ <0 0x11c30000 0 0x1000>,
+ <0 0x11c40000 0 0x1000>,
+ <0 0x11e20000 0 0x1000>,
+ <0 0x11e30000 0 0x1000>,
+ <0 0x11f00000 0 0x1000>,
+ <0 0x11f10000 0 0x1000>,
+ <0 0x1000b000 0 0x1000>;
+ reg-names = "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt",
+ "iocfg_lb", "iocfg_tr", "iocfg_tl", "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 100>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+ };
+
sgmiisys0: syscon@10060000 {
compatible = "mediatek,mt7986-sgmiisys_0",
"syscon";
--
2.29.2
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 3/4] arm64: dts: mediatek: add pinctrl support for mt7986a
@ 2021-10-14 7:58 ` Sam Shih
0 siblings, 0 replies; 21+ messages in thread
From: Sam Shih @ 2021-10-14 7:58 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Matthias Brugger, Sean Wang,
linux-gpio, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel
Cc: John Crispin, Ryder Lee, Sam Shih
Add mt7986a pinctrl node, and update pinmux setting for mt7986a
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 20 +++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 21 ++++++++++++++++++++
2 files changed, 41 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index 5348fc427463..0a54b1ed4fce 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -26,9 +26,29 @@ &uart0 {
};
&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
status = "okay";
};
&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
status = "okay";
};
+
+&pio {
+ uart1_pins: uart1-pins {
+ mux {
+ function = "uart";
+ groups = "uart1";
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ mux {
+ function = "uart";
+ groups = "uart2";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index a8cf0eb79688..c59a27aa86e2 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -128,6 +128,27 @@ apmixedsys: apmixedsys@1001e000 {
#clock-cells = <1>;
};
+ pio: pinctrl@1001f000 {
+ compatible = "mediatek,mt7986a-pinctrl";
+ reg = <0 0x1001f000 0 0x1000>,
+ <0 0x11c30000 0 0x1000>,
+ <0 0x11c40000 0 0x1000>,
+ <0 0x11e20000 0 0x1000>,
+ <0 0x11e30000 0 0x1000>,
+ <0 0x11f00000 0 0x1000>,
+ <0 0x11f10000 0 0x1000>,
+ <0 0x1000b000 0 0x1000>;
+ reg-names = "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt",
+ "iocfg_lb", "iocfg_tr", "iocfg_tl", "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 100>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+ };
+
sgmiisys0: syscon@10060000 {
compatible = "mediatek,mt7986-sgmiisys_0",
"syscon";
--
2.29.2
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 3/4] arm64: dts: mediatek: add pinctrl support for mt7986a
@ 2021-10-14 7:58 ` Sam Shih
0 siblings, 0 replies; 21+ messages in thread
From: Sam Shih @ 2021-10-14 7:58 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Matthias Brugger, Sean Wang,
linux-gpio, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel
Cc: John Crispin, Ryder Lee, Sam Shih
Add mt7986a pinctrl node, and update pinmux setting for mt7986a
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 20 +++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 21 ++++++++++++++++++++
2 files changed, 41 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index 5348fc427463..0a54b1ed4fce 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -26,9 +26,29 @@ &uart0 {
};
&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
status = "okay";
};
&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
status = "okay";
};
+
+&pio {
+ uart1_pins: uart1-pins {
+ mux {
+ function = "uart";
+ groups = "uart1";
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ mux {
+ function = "uart";
+ groups = "uart2";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index a8cf0eb79688..c59a27aa86e2 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -128,6 +128,27 @@ apmixedsys: apmixedsys@1001e000 {
#clock-cells = <1>;
};
+ pio: pinctrl@1001f000 {
+ compatible = "mediatek,mt7986a-pinctrl";
+ reg = <0 0x1001f000 0 0x1000>,
+ <0 0x11c30000 0 0x1000>,
+ <0 0x11c40000 0 0x1000>,
+ <0 0x11e20000 0 0x1000>,
+ <0 0x11e30000 0 0x1000>,
+ <0 0x11f00000 0 0x1000>,
+ <0 0x11f10000 0 0x1000>,
+ <0 0x1000b000 0 0x1000>;
+ reg-names = "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt",
+ "iocfg_lb", "iocfg_tr", "iocfg_tl", "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 100>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+ };
+
sgmiisys0: syscon@10060000 {
compatible = "mediatek,mt7986-sgmiisys_0",
"syscon";
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 4/4] arm64: dts: mediatek: add pinctrl support for mt7986b
2021-10-14 7:58 ` Sam Shih
(?)
@ 2021-10-14 7:58 ` Sam Shih
-1 siblings, 0 replies; 21+ messages in thread
From: Sam Shih @ 2021-10-14 7:58 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Matthias Brugger, Sean Wang,
linux-gpio, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel
Cc: John Crispin, Ryder Lee, Sam Shih
Add mt7986b pinctrl node
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7986b.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
index 9cc27020901a..a0b5ee232443 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
@@ -128,6 +128,27 @@ apmixedsys: apmixedsys@1001e000 {
#clock-cells = <1>;
};
+ pio: pinctrl@1001f000 {
+ compatible = "mediatek,mt7986b-pinctrl";
+ reg = <0 0x1001f000 0 0x1000>,
+ <0 0x11c30000 0 0x1000>,
+ <0 0x11c40000 0 0x1000>,
+ <0 0x11e20000 0 0x1000>,
+ <0 0x11e30000 0 0x1000>,
+ <0 0x11f00000 0 0x1000>,
+ <0 0x11f10000 0 0x1000>,
+ <0 0x1000b000 0 0x1000>;
+ reg-names = "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt",
+ "iocfg_lb", "iocfg_tr", "iocfg_tl", "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 41>, <&pio 66 66 35>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+ };
+
sgmiisys0: syscon@10060000 {
compatible = "mediatek,mt7986-sgmiisys_0",
"syscon";
--
2.29.2
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 4/4] arm64: dts: mediatek: add pinctrl support for mt7986b
@ 2021-10-14 7:58 ` Sam Shih
0 siblings, 0 replies; 21+ messages in thread
From: Sam Shih @ 2021-10-14 7:58 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Matthias Brugger, Sean Wang,
linux-gpio, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel
Cc: John Crispin, Ryder Lee, Sam Shih
Add mt7986b pinctrl node
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7986b.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
index 9cc27020901a..a0b5ee232443 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
@@ -128,6 +128,27 @@ apmixedsys: apmixedsys@1001e000 {
#clock-cells = <1>;
};
+ pio: pinctrl@1001f000 {
+ compatible = "mediatek,mt7986b-pinctrl";
+ reg = <0 0x1001f000 0 0x1000>,
+ <0 0x11c30000 0 0x1000>,
+ <0 0x11c40000 0 0x1000>,
+ <0 0x11e20000 0 0x1000>,
+ <0 0x11e30000 0 0x1000>,
+ <0 0x11f00000 0 0x1000>,
+ <0 0x11f10000 0 0x1000>,
+ <0 0x1000b000 0 0x1000>;
+ reg-names = "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt",
+ "iocfg_lb", "iocfg_tr", "iocfg_tl", "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 41>, <&pio 66 66 35>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+ };
+
sgmiisys0: syscon@10060000 {
compatible = "mediatek,mt7986-sgmiisys_0",
"syscon";
--
2.29.2
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 4/4] arm64: dts: mediatek: add pinctrl support for mt7986b
@ 2021-10-14 7:58 ` Sam Shih
0 siblings, 0 replies; 21+ messages in thread
From: Sam Shih @ 2021-10-14 7:58 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Matthias Brugger, Sean Wang,
linux-gpio, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel
Cc: John Crispin, Ryder Lee, Sam Shih
Add mt7986b pinctrl node
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7986b.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
index 9cc27020901a..a0b5ee232443 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
@@ -128,6 +128,27 @@ apmixedsys: apmixedsys@1001e000 {
#clock-cells = <1>;
};
+ pio: pinctrl@1001f000 {
+ compatible = "mediatek,mt7986b-pinctrl";
+ reg = <0 0x1001f000 0 0x1000>,
+ <0 0x11c30000 0 0x1000>,
+ <0 0x11c40000 0 0x1000>,
+ <0 0x11e20000 0 0x1000>,
+ <0 0x11e30000 0 0x1000>,
+ <0 0x11f00000 0 0x1000>,
+ <0 0x11f10000 0 0x1000>,
+ <0 0x1000b000 0 0x1000>;
+ reg-names = "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt",
+ "iocfg_lb", "iocfg_tr", "iocfg_tl", "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 41>, <&pio 66 66 35>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+ };
+
sgmiisys0: syscon@10060000 {
compatible = "mediatek,mt7986-sgmiisys_0",
"syscon";
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH v7 1/4] dt-bindings: pinctrl: update bindings for MT7986 SoC
2021-10-14 7:58 ` Sam Shih
(?)
@ 2021-10-14 14:31 ` Rob Herring
-1 siblings, 0 replies; 21+ messages in thread
From: Rob Herring @ 2021-10-14 14:31 UTC (permalink / raw)
To: Sam Shih
Cc: Matthias Brugger, Rob Herring, Linus Walleij, Ryder Lee,
linux-gpio, devicetree, linux-mediatek, linux-kernel, Sean Wang,
John Crispin, linux-arm-kernel
On Thu, 14 Oct 2021 15:58:33 +0800, Sam Shih wrote:
> This updates bindings for MT7986 pinctrl driver. The
> difference of pinctrl between mt7986a and mt7986b is that pin-41 to
> pin-65 do not exist on mt7986b
>
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
>
> ---
> v7 : updated pinctcl node binding description, and separate pinctrl
> part into a single patch series
>
> Original thread:
> https://lore.kernel.org/all/8348ed3e-c561-ad7e-fe9e-a31ed346d8d0@gmail.com/
>
> v6 : fixed yamllint warnings/errors v2
> v5 : fixed yamllint warnings/errors v1
> v4 : used yaml format instead of txt format document
> v3 : make mt7986 pinctrl bindings as a separate file
> v2 : deleted the redundant description of mt7986a/mt7986b
> ---
> .../pinctrl/mediatek,mt7986-pinctrl.yaml | 364 ++++++++++++++++++
> 1 file changed, 364 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dts:52.36-57.15: ERROR (duplicate_node_names): /example-0/soc/pinctrl@1001f000/uart1-pins: Duplicate node name
ERROR: Input tree has errors, aborting (use -f to force output)
make[1]: *** [scripts/Makefile.lib:385: Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1441: dt_binding_check] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/1540821
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v7 1/4] dt-bindings: pinctrl: update bindings for MT7986 SoC
@ 2021-10-14 14:31 ` Rob Herring
0 siblings, 0 replies; 21+ messages in thread
From: Rob Herring @ 2021-10-14 14:31 UTC (permalink / raw)
To: Sam Shih
Cc: Matthias Brugger, Rob Herring, Linus Walleij, Ryder Lee,
linux-gpio, devicetree, linux-mediatek, linux-kernel, Sean Wang,
John Crispin, linux-arm-kernel
On Thu, 14 Oct 2021 15:58:33 +0800, Sam Shih wrote:
> This updates bindings for MT7986 pinctrl driver. The
> difference of pinctrl between mt7986a and mt7986b is that pin-41 to
> pin-65 do not exist on mt7986b
>
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
>
> ---
> v7 : updated pinctcl node binding description, and separate pinctrl
> part into a single patch series
>
> Original thread:
> https://lore.kernel.org/all/8348ed3e-c561-ad7e-fe9e-a31ed346d8d0@gmail.com/
>
> v6 : fixed yamllint warnings/errors v2
> v5 : fixed yamllint warnings/errors v1
> v4 : used yaml format instead of txt format document
> v3 : make mt7986 pinctrl bindings as a separate file
> v2 : deleted the redundant description of mt7986a/mt7986b
> ---
> .../pinctrl/mediatek,mt7986-pinctrl.yaml | 364 ++++++++++++++++++
> 1 file changed, 364 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dts:52.36-57.15: ERROR (duplicate_node_names): /example-0/soc/pinctrl@1001f000/uart1-pins: Duplicate node name
ERROR: Input tree has errors, aborting (use -f to force output)
make[1]: *** [scripts/Makefile.lib:385: Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1441: dt_binding_check] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/1540821
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v7 1/4] dt-bindings: pinctrl: update bindings for MT7986 SoC
@ 2021-10-14 14:31 ` Rob Herring
0 siblings, 0 replies; 21+ messages in thread
From: Rob Herring @ 2021-10-14 14:31 UTC (permalink / raw)
To: Sam Shih
Cc: Matthias Brugger, Rob Herring, Linus Walleij, Ryder Lee,
linux-gpio, devicetree, linux-mediatek, linux-kernel, Sean Wang,
John Crispin, linux-arm-kernel
On Thu, 14 Oct 2021 15:58:33 +0800, Sam Shih wrote:
> This updates bindings for MT7986 pinctrl driver. The
> difference of pinctrl between mt7986a and mt7986b is that pin-41 to
> pin-65 do not exist on mt7986b
>
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
>
> ---
> v7 : updated pinctcl node binding description, and separate pinctrl
> part into a single patch series
>
> Original thread:
> https://lore.kernel.org/all/8348ed3e-c561-ad7e-fe9e-a31ed346d8d0@gmail.com/
>
> v6 : fixed yamllint warnings/errors v2
> v5 : fixed yamllint warnings/errors v1
> v4 : used yaml format instead of txt format document
> v3 : make mt7986 pinctrl bindings as a separate file
> v2 : deleted the redundant description of mt7986a/mt7986b
> ---
> .../pinctrl/mediatek,mt7986-pinctrl.yaml | 364 ++++++++++++++++++
> 1 file changed, 364 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dts:52.36-57.15: ERROR (duplicate_node_names): /example-0/soc/pinctrl@1001f000/uart1-pins: Duplicate node name
ERROR: Input tree has errors, aborting (use -f to force output)
make[1]: *** [scripts/Makefile.lib:385: Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1441: dt_binding_check] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/1540821
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v7 1/4] dt-bindings: pinctrl: update bindings for MT7986 SoC
2021-10-14 14:31 ` Rob Herring
(?)
@ 2021-10-15 1:45 ` Sam Shih
-1 siblings, 0 replies; 21+ messages in thread
From: Sam Shih @ 2021-10-15 1:45 UTC (permalink / raw)
To: Rob Herring
Cc: Matthias Brugger, Rob Herring, Linus Walleij, Ryder Lee,
linux-gpio, devicetree, linux-mediatek, linux-kernel, Sean Wang,
John Crispin, linux-arm-kernel
Hi
On Thu, 2021-10-14 at 09:31 -0500, Rob Herring wrote:
> On Thu, 14 Oct 2021 15:58:33 +0800, Sam Shih wrote:
> > This updates bindings for MT7986 pinctrl driver. The
> > difference of pinctrl between mt7986a and mt7986b is that pin-41 to
> > pin-65 do not exist on mt7986b
> >
> > Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> >
> > ---
> > v7 : updated pinctcl node binding description, and separate pinctrl
> > part into a single patch series
> >
> > Original thread:
> >
https://urldefense.com/v3/__https://lore.kernel.org/all/8348ed3e-c561-ad7e-fe9e-a31ed346d8d0@gmail.com/__;!!CTRNKA9wMg0ARbw!yJc1hf6XafeskaOgY8TmMDpGDHuIDhx6AGIpuOiJRl7jCVYcnPmr6I4XKz2iy6O4$
> >
> >
> > v6 : fixed yamllint warnings/errors v2
> > v5 : fixed yamllint warnings/errors v1
> > v4 : used yaml format instead of txt format document
> > v3 : make mt7986 pinctrl bindings as a separate file
> > v2 : deleted the redundant description of mt7986a/mt7986b
> > ---
> > .../pinctrl/mediatek,mt7986-pinctrl.yaml | 364
> > ++++++++++++++++++
> > 1 file changed, 364 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-
> > pinctrl.yaml
> >
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m
> dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-
> pinctrl.example.dts:52.36-57.15: ERROR (duplicate_node_names):
> /example-0/soc/pinctrl@1001f000/uart1-pins: Duplicate node name
> ERROR: Input tree has errors, aborting (use -f to force output)
> make[1]: *** [scripts/Makefile.lib:385:
> Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-
> pinctrl.example.dt.yaml] Error 2
> make[1]: *** Waiting for unfinished jobs....
> make: *** [Makefile:1441: dt_binding_check] Error 2
>
Sorry, I took the wrong patch in my local environment for submmit
This should be "uart2_pins: uart2-pins { ... "
I will send next patch to fix this.
+ uart2_pins: uart1-pins {
+ mux {
+ function = "uart";
+ groups = "uart2";
+ };
+ };
> doc reference errors (make refcheckdocs):
>
> See
> https://urldefense.com/v3/__https://patchwork.ozlabs.org/patch/1540821__;!!CTRNKA9wMg0ARbw!yJc1hf6XafeskaOgY8TmMDpGDHuIDhx6AGIpuOiJRl7jCVYcnPmr6I4XK9R-t-CX$
>
>
> This check can fail if there are any dependencies. The base for a
> patch
> series is generally the most recent rc1.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up
> to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit.
Thanks,
Sam
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v7 1/4] dt-bindings: pinctrl: update bindings for MT7986 SoC
@ 2021-10-15 1:45 ` Sam Shih
0 siblings, 0 replies; 21+ messages in thread
From: Sam Shih @ 2021-10-15 1:45 UTC (permalink / raw)
To: Rob Herring
Cc: Matthias Brugger, Rob Herring, Linus Walleij, Ryder Lee,
linux-gpio, devicetree, linux-mediatek, linux-kernel, Sean Wang,
John Crispin, linux-arm-kernel
Hi
On Thu, 2021-10-14 at 09:31 -0500, Rob Herring wrote:
> On Thu, 14 Oct 2021 15:58:33 +0800, Sam Shih wrote:
> > This updates bindings for MT7986 pinctrl driver. The
> > difference of pinctrl between mt7986a and mt7986b is that pin-41 to
> > pin-65 do not exist on mt7986b
> >
> > Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> >
> > ---
> > v7 : updated pinctcl node binding description, and separate pinctrl
> > part into a single patch series
> >
> > Original thread:
> >
https://urldefense.com/v3/__https://lore.kernel.org/all/8348ed3e-c561-ad7e-fe9e-a31ed346d8d0@gmail.com/__;!!CTRNKA9wMg0ARbw!yJc1hf6XafeskaOgY8TmMDpGDHuIDhx6AGIpuOiJRl7jCVYcnPmr6I4XKz2iy6O4$
> >
> >
> > v6 : fixed yamllint warnings/errors v2
> > v5 : fixed yamllint warnings/errors v1
> > v4 : used yaml format instead of txt format document
> > v3 : make mt7986 pinctrl bindings as a separate file
> > v2 : deleted the redundant description of mt7986a/mt7986b
> > ---
> > .../pinctrl/mediatek,mt7986-pinctrl.yaml | 364
> > ++++++++++++++++++
> > 1 file changed, 364 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-
> > pinctrl.yaml
> >
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m
> dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-
> pinctrl.example.dts:52.36-57.15: ERROR (duplicate_node_names):
> /example-0/soc/pinctrl@1001f000/uart1-pins: Duplicate node name
> ERROR: Input tree has errors, aborting (use -f to force output)
> make[1]: *** [scripts/Makefile.lib:385:
> Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-
> pinctrl.example.dt.yaml] Error 2
> make[1]: *** Waiting for unfinished jobs....
> make: *** [Makefile:1441: dt_binding_check] Error 2
>
Sorry, I took the wrong patch in my local environment for submmit
This should be "uart2_pins: uart2-pins { ... "
I will send next patch to fix this.
+ uart2_pins: uart1-pins {
+ mux {
+ function = "uart";
+ groups = "uart2";
+ };
+ };
> doc reference errors (make refcheckdocs):
>
> See
> https://urldefense.com/v3/__https://patchwork.ozlabs.org/patch/1540821__;!!CTRNKA9wMg0ARbw!yJc1hf6XafeskaOgY8TmMDpGDHuIDhx6AGIpuOiJRl7jCVYcnPmr6I4XK9R-t-CX$
>
>
> This check can fail if there are any dependencies. The base for a
> patch
> series is generally the most recent rc1.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up
> to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit.
Thanks,
Sam
>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v7 1/4] dt-bindings: pinctrl: update bindings for MT7986 SoC
@ 2021-10-15 1:45 ` Sam Shih
0 siblings, 0 replies; 21+ messages in thread
From: Sam Shih @ 2021-10-15 1:45 UTC (permalink / raw)
To: Rob Herring
Cc: Matthias Brugger, Rob Herring, Linus Walleij, Ryder Lee,
linux-gpio, devicetree, linux-mediatek, linux-kernel, Sean Wang,
John Crispin, linux-arm-kernel
Hi
On Thu, 2021-10-14 at 09:31 -0500, Rob Herring wrote:
> On Thu, 14 Oct 2021 15:58:33 +0800, Sam Shih wrote:
> > This updates bindings for MT7986 pinctrl driver. The
> > difference of pinctrl between mt7986a and mt7986b is that pin-41 to
> > pin-65 do not exist on mt7986b
> >
> > Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> >
> > ---
> > v7 : updated pinctcl node binding description, and separate pinctrl
> > part into a single patch series
> >
> > Original thread:
> >
https://urldefense.com/v3/__https://lore.kernel.org/all/8348ed3e-c561-ad7e-fe9e-a31ed346d8d0@gmail.com/__;!!CTRNKA9wMg0ARbw!yJc1hf6XafeskaOgY8TmMDpGDHuIDhx6AGIpuOiJRl7jCVYcnPmr6I4XKz2iy6O4$
> >
> >
> > v6 : fixed yamllint warnings/errors v2
> > v5 : fixed yamllint warnings/errors v1
> > v4 : used yaml format instead of txt format document
> > v3 : make mt7986 pinctrl bindings as a separate file
> > v2 : deleted the redundant description of mt7986a/mt7986b
> > ---
> > .../pinctrl/mediatek,mt7986-pinctrl.yaml | 364
> > ++++++++++++++++++
> > 1 file changed, 364 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-
> > pinctrl.yaml
> >
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m
> dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-
> pinctrl.example.dts:52.36-57.15: ERROR (duplicate_node_names):
> /example-0/soc/pinctrl@1001f000/uart1-pins: Duplicate node name
> ERROR: Input tree has errors, aborting (use -f to force output)
> make[1]: *** [scripts/Makefile.lib:385:
> Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-
> pinctrl.example.dt.yaml] Error 2
> make[1]: *** Waiting for unfinished jobs....
> make: *** [Makefile:1441: dt_binding_check] Error 2
>
Sorry, I took the wrong patch in my local environment for submmit
This should be "uart2_pins: uart2-pins { ... "
I will send next patch to fix this.
+ uart2_pins: uart1-pins {
+ mux {
+ function = "uart";
+ groups = "uart2";
+ };
+ };
> doc reference errors (make refcheckdocs):
>
> See
> https://urldefense.com/v3/__https://patchwork.ozlabs.org/patch/1540821__;!!CTRNKA9wMg0ARbw!yJc1hf6XafeskaOgY8TmMDpGDHuIDhx6AGIpuOiJRl7jCVYcnPmr6I4XK9R-t-CX$
>
>
> This check can fail if there are any dependencies. The base for a
> patch
> series is generally the most recent rc1.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up
> to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit.
Thanks,
Sam
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2021-10-15 1:57 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-14 7:58 [PATCH v7 0/4] Mediatek MT7986 pinctrl support Sam Shih
2021-10-14 7:58 ` Sam Shih
2021-10-14 7:58 ` Sam Shih
2021-10-14 7:58 ` [PATCH v7 1/4] dt-bindings: pinctrl: update bindings for MT7986 SoC Sam Shih
2021-10-14 7:58 ` Sam Shih
2021-10-14 7:58 ` Sam Shih
2021-10-14 14:31 ` Rob Herring
2021-10-14 14:31 ` Rob Herring
2021-10-14 14:31 ` Rob Herring
2021-10-15 1:45 ` Sam Shih
2021-10-15 1:45 ` Sam Shih
2021-10-15 1:45 ` Sam Shih
2021-10-14 7:58 ` [PATCH v7 2/4] pinctrl: mediatek: add support " Sam Shih
2021-10-14 7:58 ` Sam Shih
2021-10-14 7:58 ` Sam Shih
2021-10-14 7:58 ` [PATCH v7 3/4] arm64: dts: mediatek: add pinctrl support for mt7986a Sam Shih
2021-10-14 7:58 ` Sam Shih
2021-10-14 7:58 ` Sam Shih
2021-10-14 7:58 ` [PATCH v7 4/4] arm64: dts: mediatek: add pinctrl support for mt7986b Sam Shih
2021-10-14 7:58 ` Sam Shih
2021-10-14 7:58 ` Sam Shih
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.