* [PATCH] MIPS: Remove NETLOGIC support
@ 2021-10-20 12:49 Thomas Bogendoerfer
2021-10-24 15:26 ` Thomas Bogendoerfer
0 siblings, 1 reply; 2+ messages in thread
From: Thomas Bogendoerfer @ 2021-10-20 12:49 UTC (permalink / raw)
To: Rob Herring, Peter Zijlstra, Ingo Molnar,
Arnaldo Carvalho de Melo, Mark Rutland, Alexander Shishkin,
Jiri Olsa, Namhyung Kim, Huacai Chen, Aleksandar Markovic,
linux-mips, linux-kernel, devicetree, linux-perf-users, kvm
No (active) developer owns this hardware, so let's remove Linux support.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
---
arch/mips/Kbuild.platforms | 1 -
arch/mips/Kconfig | 91 +--
arch/mips/boot/compressed/uart-16550.c | 12 -
arch/mips/boot/dts/Makefile | 1 -
arch/mips/boot/dts/netlogic/Makefile | 8 -
arch/mips/boot/dts/netlogic/xlp_evp.dts | 131 ----
arch/mips/boot/dts/netlogic/xlp_fvp.dts | 131 ----
arch/mips/boot/dts/netlogic/xlp_gvp.dts | 89 ---
arch/mips/boot/dts/netlogic/xlp_rvp.dts | 89 ---
arch/mips/boot/dts/netlogic/xlp_svp.dts | 131 ----
arch/mips/configs/nlm_xlp_defconfig | 557 -----------------
arch/mips/configs/nlm_xlr_defconfig | 508 ----------------
arch/mips/include/asm/cop2.h | 11 -
arch/mips/include/asm/cpu-type.h | 8 -
arch/mips/include/asm/cpu.h | 2 +-
arch/mips/include/asm/hazards.h | 2 +-
.../asm/mach-netlogic/cpu-feature-overrides.h | 57 --
arch/mips/include/asm/mach-netlogic/irq.h | 17 -
.../include/asm/mach-netlogic/multi-node.h | 74 ---
arch/mips/include/asm/netlogic/common.h | 132 ----
arch/mips/include/asm/netlogic/haldefs.h | 171 ------
arch/mips/include/asm/netlogic/interrupt.h | 45 --
arch/mips/include/asm/netlogic/mips-extns.h | 301 ---------
arch/mips/include/asm/netlogic/psb-bootinfo.h | 95 ---
.../include/asm/netlogic/xlp-hal/bridge.h | 186 ------
.../include/asm/netlogic/xlp-hal/cpucontrol.h | 89 ---
.../mips/include/asm/netlogic/xlp-hal/iomap.h | 214 -------
.../include/asm/netlogic/xlp-hal/pcibus.h | 113 ----
arch/mips/include/asm/netlogic/xlp-hal/pic.h | 366 -----------
arch/mips/include/asm/netlogic/xlp-hal/sys.h | 213 -------
arch/mips/include/asm/netlogic/xlp-hal/uart.h | 192 ------
arch/mips/include/asm/netlogic/xlp-hal/xlp.h | 119 ----
arch/mips/include/asm/netlogic/xlr/bridge.h | 104 ----
arch/mips/include/asm/netlogic/xlr/flash.h | 55 --
arch/mips/include/asm/netlogic/xlr/fmn.h | 365 -----------
arch/mips/include/asm/netlogic/xlr/gpio.h | 74 ---
arch/mips/include/asm/netlogic/xlr/iomap.h | 109 ----
arch/mips/include/asm/netlogic/xlr/msidef.h | 84 ---
arch/mips/include/asm/netlogic/xlr/pic.h | 306 ----------
arch/mips/include/asm/netlogic/xlr/xlr.h | 59 --
arch/mips/include/asm/processor.h | 13 -
arch/mips/include/asm/vermagic.h | 4 -
arch/mips/kernel/cpu-probe.c | 84 ---
arch/mips/kernel/idle.c | 2 -
arch/mips/kernel/perf_event_mipsxx.c | 86 ---
arch/mips/kvm/entry.c | 8 +-
arch/mips/mm/c-r4k.c | 2 -
arch/mips/mm/tlbex.c | 9 +-
arch/mips/netlogic/Kconfig | 86 ---
arch/mips/netlogic/Makefile | 4 -
arch/mips/netlogic/Platform | 16 -
arch/mips/netlogic/common/Makefile | 5 -
arch/mips/netlogic/common/earlycons.c | 63 --
arch/mips/netlogic/common/irq.c | 350 -----------
arch/mips/netlogic/common/reset.S | 299 ---------
arch/mips/netlogic/common/smp.c | 285 ---------
arch/mips/netlogic/common/smpboot.S | 141 -----
arch/mips/netlogic/common/time.c | 110 ----
arch/mips/netlogic/xlp/Makefile | 11 -
arch/mips/netlogic/xlp/ahci-init-xlp2.c | 390 ------------
arch/mips/netlogic/xlp/ahci-init.c | 209 -------
arch/mips/netlogic/xlp/cop2-ex.c | 121 ----
arch/mips/netlogic/xlp/dt.c | 95 ---
arch/mips/netlogic/xlp/nlm_hal.c | 508 ----------------
arch/mips/netlogic/xlp/setup.c | 174 ------
arch/mips/netlogic/xlp/usb-init-xlp2.c | 288 ---------
arch/mips/netlogic/xlp/usb-init.c | 149 -----
arch/mips/netlogic/xlp/wakeup.c | 212 -------
arch/mips/netlogic/xlr/Makefile | 3 -
arch/mips/netlogic/xlr/fmn-config.c | 296 ---------
arch/mips/netlogic/xlr/fmn.c | 199 ------
arch/mips/netlogic/xlr/platform-flash.c | 216 -------
arch/mips/netlogic/xlr/platform.c | 250 --------
arch/mips/netlogic/xlr/setup.c | 206 -------
arch/mips/netlogic/xlr/wakeup.c | 85 ---
arch/mips/pci/Makefile | 3 -
arch/mips/pci/msi-xlp.c | 571 ------------------
arch/mips/pci/pci-xlp.c | 332 ----------
arch/mips/pci/pci-xlr.c | 368 -----------
79 files changed, 6 insertions(+), 11559 deletions(-)
delete mode 100644 arch/mips/boot/dts/netlogic/Makefile
delete mode 100644 arch/mips/boot/dts/netlogic/xlp_evp.dts
delete mode 100644 arch/mips/boot/dts/netlogic/xlp_fvp.dts
delete mode 100644 arch/mips/boot/dts/netlogic/xlp_gvp.dts
delete mode 100644 arch/mips/boot/dts/netlogic/xlp_rvp.dts
delete mode 100644 arch/mips/boot/dts/netlogic/xlp_svp.dts
delete mode 100644 arch/mips/configs/nlm_xlp_defconfig
delete mode 100644 arch/mips/configs/nlm_xlr_defconfig
delete mode 100644 arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h
delete mode 100644 arch/mips/include/asm/mach-netlogic/irq.h
delete mode 100644 arch/mips/include/asm/mach-netlogic/multi-node.h
delete mode 100644 arch/mips/include/asm/netlogic/common.h
delete mode 100644 arch/mips/include/asm/netlogic/haldefs.h
delete mode 100644 arch/mips/include/asm/netlogic/interrupt.h
delete mode 100644 arch/mips/include/asm/netlogic/mips-extns.h
delete mode 100644 arch/mips/include/asm/netlogic/psb-bootinfo.h
delete mode 100644 arch/mips/include/asm/netlogic/xlp-hal/bridge.h
delete mode 100644 arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h
delete mode 100644 arch/mips/include/asm/netlogic/xlp-hal/iomap.h
delete mode 100644 arch/mips/include/asm/netlogic/xlp-hal/pcibus.h
delete mode 100644 arch/mips/include/asm/netlogic/xlp-hal/pic.h
delete mode 100644 arch/mips/include/asm/netlogic/xlp-hal/sys.h
delete mode 100644 arch/mips/include/asm/netlogic/xlp-hal/uart.h
delete mode 100644 arch/mips/include/asm/netlogic/xlp-hal/xlp.h
delete mode 100644 arch/mips/include/asm/netlogic/xlr/bridge.h
delete mode 100644 arch/mips/include/asm/netlogic/xlr/flash.h
delete mode 100644 arch/mips/include/asm/netlogic/xlr/fmn.h
delete mode 100644 arch/mips/include/asm/netlogic/xlr/gpio.h
delete mode 100644 arch/mips/include/asm/netlogic/xlr/iomap.h
delete mode 100644 arch/mips/include/asm/netlogic/xlr/msidef.h
delete mode 100644 arch/mips/include/asm/netlogic/xlr/pic.h
delete mode 100644 arch/mips/include/asm/netlogic/xlr/xlr.h
delete mode 100644 arch/mips/netlogic/Kconfig
delete mode 100644 arch/mips/netlogic/Makefile
delete mode 100644 arch/mips/netlogic/Platform
delete mode 100644 arch/mips/netlogic/common/Makefile
delete mode 100644 arch/mips/netlogic/common/earlycons.c
delete mode 100644 arch/mips/netlogic/common/irq.c
delete mode 100644 arch/mips/netlogic/common/reset.S
delete mode 100644 arch/mips/netlogic/common/smp.c
delete mode 100644 arch/mips/netlogic/common/smpboot.S
delete mode 100644 arch/mips/netlogic/common/time.c
delete mode 100644 arch/mips/netlogic/xlp/Makefile
delete mode 100644 arch/mips/netlogic/xlp/ahci-init-xlp2.c
delete mode 100644 arch/mips/netlogic/xlp/ahci-init.c
delete mode 100644 arch/mips/netlogic/xlp/cop2-ex.c
delete mode 100644 arch/mips/netlogic/xlp/dt.c
delete mode 100644 arch/mips/netlogic/xlp/nlm_hal.c
delete mode 100644 arch/mips/netlogic/xlp/setup.c
delete mode 100644 arch/mips/netlogic/xlp/usb-init-xlp2.c
delete mode 100644 arch/mips/netlogic/xlp/usb-init.c
delete mode 100644 arch/mips/netlogic/xlp/wakeup.c
delete mode 100644 arch/mips/netlogic/xlr/Makefile
delete mode 100644 arch/mips/netlogic/xlr/fmn-config.c
delete mode 100644 arch/mips/netlogic/xlr/fmn.c
delete mode 100644 arch/mips/netlogic/xlr/platform-flash.c
delete mode 100644 arch/mips/netlogic/xlr/platform.c
delete mode 100644 arch/mips/netlogic/xlr/setup.c
delete mode 100644 arch/mips/netlogic/xlr/wakeup.c
delete mode 100644 arch/mips/pci/msi-xlp.c
delete mode 100644 arch/mips/pci/pci-xlp.c
delete mode 100644 arch/mips/pci/pci-xlr.c
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index 584081df89c2..2c57994b5217 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -19,7 +19,6 @@ platform-$(CONFIG_MACH_LOONGSON32) += loongson32/
platform-$(CONFIG_MACH_LOONGSON64) += loongson64/
platform-$(CONFIG_MIPS_MALTA) += mti-malta/
platform-$(CONFIG_MACH_NINTENDO64) += n64/
-platform-$(CONFIG_NLM_COMMON) += netlogic/
platform-$(CONFIG_PIC32MZDA) += pic32/
platform-$(CONFIG_RALINK) += ralink/
platform-$(CONFIG_MIKROTIK_RB532) += rb532/
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 35aab081917f..0610a7bb8a7a 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -994,60 +994,6 @@ config CAVIUM_OCTEON_SOC
Hikari
Say Y here for most Octeon reference boards.
-config NLM_XLR_BOARD
- bool "Netlogic XLR/XLS based systems"
- select BOOT_ELF32
- select NLM_COMMON
- select SYS_HAS_CPU_XLR
- select SYS_SUPPORTS_SMP
- select HAVE_PCI
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select PHYS_ADDR_T_64BIT
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_HIGHMEM
- select NR_CPUS_DEFAULT_32
- select CEVT_R4K
- select CSRC_R4K
- select IRQ_MIPS_CPU
- select ZONE_DMA32 if 64BIT
- select SYNC_R4K
- select SYS_HAS_EARLY_PRINTK
- select SYS_SUPPORTS_ZBOOT
- select SYS_SUPPORTS_ZBOOT_UART16550
- help
- Support for systems based on Netlogic XLR and XLS processors.
- Say Y here if you have a XLR or XLS based board.
-
-config NLM_XLP_BOARD
- bool "Netlogic XLP based systems"
- select BOOT_ELF32
- select NLM_COMMON
- select SYS_HAS_CPU_XLP
- select SYS_SUPPORTS_SMP
- select HAVE_PCI
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select PHYS_ADDR_T_64BIT
- select GPIOLIB
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_HIGHMEM
- select NR_CPUS_DEFAULT_32
- select CEVT_R4K
- select CSRC_R4K
- select IRQ_MIPS_CPU
- select ZONE_DMA32 if 64BIT
- select SYNC_R4K
- select SYS_HAS_EARLY_PRINTK
- select USE_OF
- select SYS_SUPPORTS_ZBOOT
- select SYS_SUPPORTS_ZBOOT_UART16550
- help
- This board is based on Netlogic XLP Processor.
- Say Y here if you have a XLP based board.
-
endchoice
source "arch/mips/alchemy/Kconfig"
@@ -1070,7 +1016,6 @@ source "arch/mips/cavium-octeon/Kconfig"
source "arch/mips/loongson2ef/Kconfig"
source "arch/mips/loongson32/Kconfig"
source "arch/mips/loongson64/Kconfig"
-source "arch/mips/netlogic/Kconfig"
endmenu
@@ -1786,32 +1731,6 @@ config CPU_BMIPS
help
Support for BMIPS32/3300/4350/4380 and BMIPS5000 processors.
-config CPU_XLR
- bool "Netlogic XLR SoC"
- depends on SYS_HAS_CPU_XLR
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
- select CPU_SUPPORTS_HIGHMEM
- select CPU_SUPPORTS_HUGEPAGES
- select WEAK_ORDERING
- select WEAK_REORDERING_BEYOND_LLSC
- help
- Netlogic Microsystems XLR/XLS processors.
-
-config CPU_XLP
- bool "Netlogic XLP SoC"
- depends on SYS_HAS_CPU_XLP
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
- select CPU_SUPPORTS_HIGHMEM
- select WEAK_ORDERING
- select WEAK_REORDERING_BEYOND_LLSC
- select CPU_HAS_PREFETCH
- select CPU_MIPSR2
- select CPU_SUPPORTS_HUGEPAGES
- select MIPS_ASID_BITS_VARIABLE
- help
- Netlogic Microsystems XLP processors.
endchoice
config CPU_MIPS32_3_5_FEATURES
@@ -2058,12 +1977,6 @@ config SYS_HAS_CPU_BMIPS5000
select SYS_HAS_CPU_BMIPS
select ARCH_HAS_SYNC_DMA_FOR_CPU
-config SYS_HAS_CPU_XLR
- bool
-
-config SYS_HAS_CPU_XLP
- bool
-
#
# CPU may reorder R->R, R->W, W->R, W->W
# Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
@@ -2158,7 +2071,7 @@ config CPU_SUPPORTS_HUGEPAGES
config MIPS_PGD_C0_CONTEXT
bool
depends on 64BIT
- default y if (CPU_MIPSR2 || CPU_MIPSR6) && !CPU_XLP
+ default y if (CPU_MIPSR2 || CPU_MIPSR6)
#
# Set to y for ptrace access to watch registers.
@@ -2841,7 +2754,7 @@ config NODES_SHIFT
config HW_PERF_EVENTS
bool "Enable hardware performance counter support for perf events"
- depends on PERF_EVENTS && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON64)
+ depends on PERF_EVENTS && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_LOONGSON64)
default y
help
Enable hardware performance counter support for perf events. If
diff --git a/arch/mips/boot/compressed/uart-16550.c b/arch/mips/boot/compressed/uart-16550.c
index c18d7f72d9d9..96d28f211121 100644
--- a/arch/mips/boot/compressed/uart-16550.c
+++ b/arch/mips/boot/compressed/uart-16550.c
@@ -23,18 +23,6 @@
#define PORT(offset) (CKSEG1ADDR(INGENIC_UART_BASE_ADDR) + (4 * offset))
#endif
-#ifdef CONFIG_CPU_XLR
-#define UART0_BASE 0x1EF14000
-#define PORT(offset) (CKSEG1ADDR(UART0_BASE) + (4 * offset))
-#define IOTYPE unsigned int
-#endif
-
-#ifdef CONFIG_CPU_XLP
-#define UART0_BASE 0x18030100
-#define PORT(offset) (CKSEG1ADDR(UART0_BASE) + (4 * offset))
-#define IOTYPE unsigned int
-#endif
-
#ifndef IOTYPE
#define IOTYPE char
#endif
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index be96d35eb582..928f38a79dff 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -9,7 +9,6 @@ subdir-$(CONFIG_MACH_LOONGSON64) += loongson
subdir-$(CONFIG_SOC_VCOREIII) += mscc
subdir-$(CONFIG_MIPS_MALTA) += mti
subdir-$(CONFIG_LEGACY_BOARD_SEAD3) += mti
-subdir-$(CONFIG_NLM_XLP_BOARD) += netlogic
subdir-$(CONFIG_FIT_IMAGE_FDT_NI169445) += ni
subdir-$(CONFIG_MACH_PIC32) += pic32
subdir-$(CONFIG_ATH79) += qca
diff --git a/arch/mips/boot/dts/netlogic/Makefile b/arch/mips/boot/dts/netlogic/Makefile
deleted file mode 100644
index 45af4224494f..000000000000
--- a/arch/mips/boot/dts/netlogic/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_DT_XLP_EVP) += xlp_evp.dtb
-dtb-$(CONFIG_DT_XLP_SVP) += xlp_svp.dtb
-dtb-$(CONFIG_DT_XLP_FVP) += xlp_fvp.dtb
-dtb-$(CONFIG_DT_XLP_GVP) += xlp_gvp.dtb
-dtb-$(CONFIG_DT_XLP_RVP) += xlp_rvp.dtb
-
-obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/netlogic/xlp_evp.dts b/arch/mips/boot/dts/netlogic/xlp_evp.dts
deleted file mode 100644
index e63e55926e04..000000000000
--- a/arch/mips/boot/dts/netlogic/xlp_evp.dts
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * XLP8XX Device Tree Source for EVP boards
- */
-
-/dts-v1/;
-/ {
- model = "netlogic,XLP-EVP";
- compatible = "netlogic,xlp";
- #address-cells = <2>;
- #size-cells = <2>;
-
- soc {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
- 1 0 0 0x16000000 0x02000000>; // GBU chipselects
-
- serial0: serial@30000 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0 0x30100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <133333333>;
- interrupt-parent = <&pic>;
- interrupts = <17>;
- };
- serial1: serial@31000 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0 0x31100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <133333333>;
- interrupt-parent = <&pic>;
- interrupts = <18>;
- };
- i2c0: ocores@32000 {
- compatible = "opencores,i2c-ocores";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0 0x32100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <32000000>;
- interrupt-parent = <&pic>;
- interrupts = <30>;
- };
- i2c1: ocores@33000 {
- compatible = "opencores,i2c-ocores";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0 0x33100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <32000000>;
- interrupt-parent = <&pic>;
- interrupts = <31>;
-
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
- };
-
- dtt@4c {
- compatible = "national,lm90";
- reg = <0x4c>;
- };
- };
- pic: pic@4000 {
- compatible = "netlogic,xlp-pic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0 0x4000 0x200>;
- interrupt-controller;
- };
-
- nor_flash@1,0 {
- compatible = "cfi-flash";
- #address-cells = <1>;
- #size-cells = <1>;
- bank-width = <2>;
- reg = <1 0 0x1000000>;
-
- partition@0 {
- label = "x-loader";
- reg = <0x0 0x100000>; /* 1M */
- read-only;
- };
-
- partition@100000 {
- label = "u-boot";
- reg = <0x100000 0x100000>; /* 1M */
- };
-
- partition@200000 {
- label = "kernel";
- reg = <0x200000 0x500000>; /* 5M */
- };
-
- partition@700000 {
- label = "rootfs";
- reg = <0x700000 0x800000>; /* 8M */
- };
-
- partition@f00000 {
- label = "env";
- reg = <0xf00000 0x100000>; /* 1M */
- read-only;
- };
- };
-
- gpio: xlp_gpio@34100 {
- compatible = "netlogic,xlp832-gpio";
- reg = <0 0x34100 0x1000>;
- #gpio-cells = <2>;
- gpio-controller;
-
- #interrupt-cells = <2>;
- interrupt-parent = <&pic>;
- interrupts = <39>;
- interrupt-controller;
- };
- };
-
- chosen {
- bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
- };
-};
diff --git a/arch/mips/boot/dts/netlogic/xlp_fvp.dts b/arch/mips/boot/dts/netlogic/xlp_fvp.dts
deleted file mode 100644
index d05abf13fb7d..000000000000
--- a/arch/mips/boot/dts/netlogic/xlp_fvp.dts
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * XLP2XX Device Tree Source for FVP boards
- */
-
-/dts-v1/;
-/ {
- model = "netlogic,XLP-FVP";
- compatible = "netlogic,xlp";
- #address-cells = <2>;
- #size-cells = <2>;
-
- soc {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
- 1 0 0 0x16000000 0x02000000>; // GBU chipselects
-
- serial0: serial@30000 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0 0x30100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <133333333>;
- interrupt-parent = <&pic>;
- interrupts = <17>;
- };
- serial1: serial@31000 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0 0x31100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <133333333>;
- interrupt-parent = <&pic>;
- interrupts = <18>;
- };
- i2c0: ocores@37100 {
- compatible = "opencores,i2c-ocores";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0 0x37100 0x20>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <32000000>;
- interrupt-parent = <&pic>;
- interrupts = <30>;
- };
- i2c1: ocores@37120 {
- compatible = "opencores,i2c-ocores";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0 0x37120 0x20>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <32000000>;
- interrupt-parent = <&pic>;
- interrupts = <31>;
-
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
- };
-
- dtt@4c {
- compatible = "national,lm90";
- reg = <0x4c>;
- };
- };
- pic: pic@4000 {
- compatible = "netlogic,xlp-pic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0 0x4000 0x200>;
- interrupt-controller;
- };
-
- nor_flash@1,0 {
- compatible = "cfi-flash";
- #address-cells = <1>;
- #size-cells = <1>;
- bank-width = <2>;
- reg = <1 0 0x1000000>;
-
- partition@0 {
- label = "x-loader";
- reg = <0x0 0x100000>; /* 1M */
- read-only;
- };
-
- partition@100000 {
- label = "u-boot";
- reg = <0x100000 0x100000>; /* 1M */
- };
-
- partition@200000 {
- label = "kernel";
- reg = <0x200000 0x500000>; /* 5M */
- };
-
- partition@700000 {
- label = "rootfs";
- reg = <0x700000 0x800000>; /* 8M */
- };
-
- partition@f00000 {
- label = "env";
- reg = <0xf00000 0x100000>; /* 1M */
- read-only;
- };
- };
-
- gpio: xlp_gpio@34100 {
- compatible = "netlogic,xlp208-gpio";
- reg = <0 0x34100 0x1000>;
- #gpio-cells = <2>;
- gpio-controller;
-
- #interrupt-cells = <2>;
- interrupt-parent = <&pic>;
- interrupts = <39>;
- interrupt-controller;
- };
- };
-
- chosen {
- bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
- };
-};
diff --git a/arch/mips/boot/dts/netlogic/xlp_gvp.dts b/arch/mips/boot/dts/netlogic/xlp_gvp.dts
deleted file mode 100644
index d47de4851786..000000000000
--- a/arch/mips/boot/dts/netlogic/xlp_gvp.dts
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * XLP9XX Device Tree Source for GVP boards
- */
-
-/dts-v1/;
-/ {
- model = "netlogic,XLP-GVP";
- compatible = "netlogic,xlp";
- #address-cells = <2>;
- #size-cells = <2>;
-
- soc {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
- 1 0 0 0x16000000 0x02000000>; // GBU chipselects
-
- serial0: serial@30000 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0 0x112100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <125000000>;
- interrupt-parent = <&pic>;
- interrupts = <17>;
- };
- pic: pic@110000 {
- compatible = "netlogic,xlp-pic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0 0x110000 0x200>;
- interrupt-controller;
- };
-
- nor_flash@1,0 {
- compatible = "cfi-flash";
- #address-cells = <1>;
- #size-cells = <1>;
- bank-width = <2>;
- reg = <1 0 0x1000000>;
-
- partition@0 {
- label = "x-loader";
- reg = <0x0 0x100000>; /* 1M */
- read-only;
- };
-
- partition@100000 {
- label = "u-boot";
- reg = <0x100000 0x100000>; /* 1M */
- };
-
- partition@200000 {
- label = "kernel";
- reg = <0x200000 0x500000>; /* 5M */
- };
-
- partition@700000 {
- label = "rootfs";
- reg = <0x700000 0x800000>; /* 8M */
- };
-
- partition@f00000 {
- label = "env";
- reg = <0xf00000 0x100000>; /* 1M */
- read-only;
- };
- };
-
- gpio: xlp_gpio@114100 {
- compatible = "netlogic,xlp980-gpio";
- reg = <0 0x114100 0x1000>;
- #gpio-cells = <2>;
- gpio-controller;
-
- #interrupt-cells = <2>;
- interrupt-parent = <&pic>;
- interrupts = <39>;
- interrupt-controller;
- };
- };
-
- chosen {
- bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
- };
-};
diff --git a/arch/mips/boot/dts/netlogic/xlp_rvp.dts b/arch/mips/boot/dts/netlogic/xlp_rvp.dts
deleted file mode 100644
index aa0faee194ec..000000000000
--- a/arch/mips/boot/dts/netlogic/xlp_rvp.dts
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * XLP5XX Device Tree Source for RVP boards
- */
-
-/dts-v1/;
-/ {
- model = "netlogic,XLP-RVP";
- compatible = "netlogic,xlp";
- #address-cells = <2>;
- #size-cells = <2>;
-
- soc {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
- 1 0 0 0x16000000 0x02000000>; // GBU chipselects
-
- serial0: serial@30000 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0 0x112100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <125000000>;
- interrupt-parent = <&pic>;
- interrupts = <17>;
- };
- pic: pic@110000 {
- compatible = "netlogic,xlp-pic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0 0x110000 0x200>;
- interrupt-controller;
- };
-
- nor_flash@1,0 {
- compatible = "cfi-flash";
- #address-cells = <1>;
- #size-cells = <1>;
- bank-width = <2>;
- reg = <1 0 0x1000000>;
-
- partition@0 {
- label = "x-loader";
- reg = <0x0 0x100000>; /* 1M */
- read-only;
- };
-
- partition@100000 {
- label = "u-boot";
- reg = <0x100000 0x100000>; /* 1M */
- };
-
- partition@200000 {
- label = "kernel";
- reg = <0x200000 0x500000>; /* 5M */
- };
-
- partition@700000 {
- label = "rootfs";
- reg = <0x700000 0x800000>; /* 8M */
- };
-
- partition@f00000 {
- label = "env";
- reg = <0xf00000 0x100000>; /* 1M */
- read-only;
- };
- };
-
- gpio: xlp_gpio@114100 {
- compatible = "netlogic,xlp532-gpio";
- reg = <0 0x114100 0x1000>;
- #gpio-cells = <2>;
- gpio-controller;
-
- #interrupt-cells = <2>;
- interrupt-parent = <&pic>;
- interrupts = <39>;
- interrupt-controller;
- };
- };
-
- chosen {
- bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
- };
-};
diff --git a/arch/mips/boot/dts/netlogic/xlp_svp.dts b/arch/mips/boot/dts/netlogic/xlp_svp.dts
deleted file mode 100644
index 3bb0b2e08e4a..000000000000
--- a/arch/mips/boot/dts/netlogic/xlp_svp.dts
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * XLP3XX Device Tree Source for SVP boards
- */
-
-/dts-v1/;
-/ {
- model = "netlogic,XLP-SVP";
- compatible = "netlogic,xlp";
- #address-cells = <2>;
- #size-cells = <2>;
-
- soc {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
- 1 0 0 0x16000000 0x02000000>; // GBU chipselects
-
- serial0: serial@30000 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0 0x30100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <133333333>;
- interrupt-parent = <&pic>;
- interrupts = <17>;
- };
- serial1: serial@31000 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0 0x31100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <133333333>;
- interrupt-parent = <&pic>;
- interrupts = <18>;
- };
- i2c0: ocores@32000 {
- compatible = "opencores,i2c-ocores";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0 0x32100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <32000000>;
- interrupt-parent = <&pic>;
- interrupts = <30>;
- };
- i2c1: ocores@33000 {
- compatible = "opencores,i2c-ocores";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0 0x33100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <32000000>;
- interrupt-parent = <&pic>;
- interrupts = <31>;
-
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
- };
-
- dtt@4c {
- compatible = "national,lm90";
- reg = <0x4c>;
- };
- };
- pic: pic@4000 {
- compatible = "netlogic,xlp-pic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0 0x4000 0x200>;
- interrupt-controller;
- };
-
- nor_flash@1,0 {
- compatible = "cfi-flash";
- #address-cells = <1>;
- #size-cells = <1>;
- bank-width = <2>;
- reg = <1 0 0x1000000>;
-
- partition@0 {
- label = "x-loader";
- reg = <0x0 0x100000>; /* 1M */
- read-only;
- };
-
- partition@100000 {
- label = "u-boot";
- reg = <0x100000 0x100000>; /* 1M */
- };
-
- partition@200000 {
- label = "kernel";
- reg = <0x200000 0x500000>; /* 5M */
- };
-
- partition@700000 {
- label = "rootfs";
- reg = <0x700000 0x800000>; /* 8M */
- };
-
- partition@f00000 {
- label = "env";
- reg = <0xf00000 0x100000>; /* 1M */
- read-only;
- };
- };
-
- gpio: xlp_gpio@34100 {
- compatible = "netlogic,xlp316-gpio";
- reg = <0 0x34100 0x1000>;
- #gpio-cells = <2>;
- gpio-controller;
-
- #interrupt-cells = <2>;
- interrupt-parent = <&pic>;
- interrupts = <39>;
- interrupt-controller;
- };
- };
-
- chosen {
- bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
- };
-};
diff --git a/arch/mips/configs/nlm_xlp_defconfig b/arch/mips/configs/nlm_xlp_defconfig
deleted file mode 100644
index 32c290611723..000000000000
--- a/arch/mips/configs/nlm_xlp_defconfig
+++ /dev/null
@@ -1,557 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_CGROUPS=y
-CONFIG_NAMESPACES=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_PROFILING=y
-CONFIG_NLM_XLP_BOARD=y
-CONFIG_64BIT=y
-CONFIG_PAGE_SIZE_16KB=y
-# CONFIG_HW_PERF_EVENTS is not set
-CONFIG_SMP=y
-# CONFIG_SECCOMP is not set
-CONFIG_PCI=y
-CONFIG_PCI_DEBUG=y
-CONFIG_PCI_STUB=y
-CONFIG_MIPS32_O32=y
-CONFIG_MIPS32_N32=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
-CONFIG_ACORN_PARTITION_ICS=y
-CONFIG_ACORN_PARTITION_RISCIX=y
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-CONFIG_ATARI_PARTITION=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_SGI_PARTITION=y
-CONFIG_ULTRIX_PARTITION=y
-CONFIG_SUN_PARTITION=y
-CONFIG_KARMA_PARTITION=y
-CONFIG_SYSV68_PARTITION=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_BINFMT_MISC=y
-CONFIG_KSM=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_NET_IPIP=m
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_HSTCP=m
-CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_SCALABLE=m
-CONFIG_TCP_CONG_LP=m
-CONFIG_TCP_CONG_VENO=m
-CONFIG_TCP_CONG_YEAH=m
-CONFIG_TCP_CONG_ILLINOIS=m
-CONFIG_TCP_MD5SIG=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TPROXY=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OSF=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SOCKET=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_VS=m
-CONFIG_IP_VS_IPV6=y
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_SECURITY=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP6_NF_SECURITY=m
-CONFIG_DECNET_NF_GRABULATOR=m
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_IP6=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-CONFIG_RDS=m
-CONFIG_RDS_TCP=m
-CONFIG_TIPC=m
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_DECNET=m
-CONFIG_LLC2=m
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_X25=m
-CONFIG_LAPB=m
-CONFIG_PHONET=m
-CONFIG_IEEE802154=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_MULTIQ=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_DRR=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_FLOW=m
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=m
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
-CONFIG_NET_ACT_NAT=m
-CONFIG_NET_ACT_PEDIT=m
-CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_ACT_SKBEDIT=m
-CONFIG_DCB=y
-CONFIG_NET_PKTGEN=m
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_RAID_ATTRS=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_ISCSI_TCP=m
-CONFIG_SCSI_DEBUG=m
-CONFIG_SCSI_DH=y
-CONFIG_SCSI_DH_RDAC=m
-CONFIG_SCSI_DH_HP_SW=m
-CONFIG_SCSI_DH_EMC=m
-CONFIG_SCSI_DH_ALUA=m
-CONFIG_SCSI_OSD_INITIATOR=m
-CONFIG_SCSI_OSD_ULD=m
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_SIL24=y
-# CONFIG_ATA_SFF is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_ADAPTEC is not set
-# CONFIG_NET_VENDOR_ALTEON is not set
-# CONFIG_NET_VENDOR_AMD is not set
-# CONFIG_NET_VENDOR_ATHEROS is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_BROCADE is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_DEC is not set
-# CONFIG_NET_VENDOR_DLINK is not set
-# CONFIG_NET_VENDOR_EMULEX is not set
-# CONFIG_NET_VENDOR_HP is not set
-# CONFIG_NET_VENDOR_I825XX is not set
-CONFIG_E1000E=y
-CONFIG_SKY2=y
-# CONFIG_NET_VENDOR_MELLANOX is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MYRI is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_NVIDIA is not set
-# CONFIG_NET_VENDOR_OKI is not set
-# CONFIG_NET_VENDOR_QLOGIC is not set
-# CONFIG_NET_VENDOR_RDC is not set
-# CONFIG_NET_VENDOR_REALTEK is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SILAN is not set
-# CONFIG_NET_VENDOR_SIS is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SUN is not set
-# CONFIG_NET_VENDOR_TEHUTI is not set
-# CONFIG_NET_VENDOR_TI is not set
-# CONFIG_NET_VENDOR_TOSHIBA is not set
-# CONFIG_NET_VENDOR_VIA is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=m
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_LEGACY_PTY_COUNT=0
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_N_HDLC=m
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=48
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_TIMERIOMEM=m
-CONFIG_RAW_DRIVER=m
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OCORES=y
-CONFIG_SENSORS_LM90=y
-CONFIG_THERMAL=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1374=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=m
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_GFS2_FS=m
-CONFIG_BTRFS_FS=m
-CONFIG_BTRFS_FS_POSIX_ACL=y
-CONFIG_NILFS2_FS=m
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=y
-CONFIG_CUSE=m
-CONFIG_FSCACHE=m
-CONFIG_FSCACHE_STATS=y
-CONFIG_FSCACHE_HISTOGRAM=y
-CONFIG_CACHEFILES=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_ECRYPT_FS=y
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=m
-CONFIG_OMFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_EXOFS_FS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=m
-CONFIG_NFS_FSCACHE=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_UPCALL=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_CIFS_DFS_UPCALL=y
-CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_SECURITY=y
-CONFIG_LSM_MMAP_MIN_ADDR=0
-CONFIG_SECURITY_SELINUX=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
-CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_SECURITY_SMACK=y
-CONFIG_SECURITY_TOMOYO=y
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_LZO=m
-CONFIG_CRC7=m
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_SCHEDSTATS=y
-CONFIG_SCHED_TRACER=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_KGDB=y
diff --git a/arch/mips/configs/nlm_xlr_defconfig b/arch/mips/configs/nlm_xlr_defconfig
deleted file mode 100644
index bf9b9244929e..000000000000
--- a/arch/mips/configs/nlm_xlr_defconfig
+++ /dev/null
@@ -1,508 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_NAMESPACES=y
-CONFIG_SCHED_AUTOGROUP=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_ELF_CORE is not set
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_PROFILING=y
-CONFIG_NLM_XLR_BOARD=y
-CONFIG_HIGHMEM=y
-CONFIG_SMP=y
-CONFIG_KEXEC=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_DEBUG=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
-CONFIG_ACORN_PARTITION_ICS=y
-CONFIG_ACORN_PARTITION_RISCIX=y
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-CONFIG_ATARI_PARTITION=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_SGI_PARTITION=y
-CONFIG_ULTRIX_PARTITION=y
-CONFIG_SUN_PARTITION=y
-CONFIG_KARMA_PARTITION=y
-CONFIG_SYSV68_PARTITION=y
-CONFIG_BINFMT_MISC=m
-CONFIG_KSM=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_NET_IPIP=m
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_HSTCP=m
-CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_SCALABLE=m
-CONFIG_TCP_CONG_LP=m
-CONFIG_TCP_CONG_VENO=m
-CONFIG_TCP_CONG_YEAH=m
-CONFIG_TCP_CONG_ILLINOIS=m
-CONFIG_TCP_MD5SIG=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TPROXY=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OSF=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SOCKET=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_VS=m
-CONFIG_IP_VS_IPV6=y
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_SECURITY=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP6_NF_SECURITY=m
-CONFIG_DECNET_NF_GRABULATOR=m
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_IP6=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-CONFIG_RDS=m
-CONFIG_RDS_TCP=m
-CONFIG_TIPC=m
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_DECNET=m
-CONFIG_LLC2=m
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_X25=m
-CONFIG_LAPB=m
-CONFIG_PHONET=m
-CONFIG_IEEE802154=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_MULTIQ=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_DRR=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_FLOW=m
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=m
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
-CONFIG_NET_ACT_NAT=m
-CONFIG_NET_ACT_PEDIT=m
-CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_ACT_SKBEDIT=m
-CONFIG_DCB=y
-CONFIG_NET_PKTGEN=m
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_ISCSI_TCP=m
-CONFIG_SCSI_DEBUG=m
-CONFIG_SCSI_DH=y
-CONFIG_SCSI_DH_RDAC=m
-CONFIG_SCSI_DH_HP_SW=m
-CONFIG_SCSI_DH_EMC=m
-CONFIG_SCSI_DH_ALUA=m
-CONFIG_SCSI_OSD_INITIATOR=m
-CONFIG_SCSI_OSD_ULD=m
-CONFIG_NETDEVICES=y
-CONFIG_E1000E=y
-CONFIG_SKY2=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=m
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_LEGACY_PTY_COUNT=0
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_N_HDLC=m
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=48
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_TIMERIOMEM=m
-CONFIG_RAW_DRIVER=m
-CONFIG_I2C=y
-CONFIG_I2C_XLR=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1374=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_GFS2_FS=m
-CONFIG_OCFS2_FS=m
-CONFIG_BTRFS_FS=m
-CONFIG_BTRFS_FS_POSIX_ACL=y
-CONFIG_NILFS2_FS=m
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=y
-CONFIG_CUSE=m
-CONFIG_FSCACHE=m
-CONFIG_FSCACHE_STATS=y
-CONFIG_FSCACHE_HISTOGRAM=y
-CONFIG_CACHEFILES=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_ECRYPT_FS=y
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=m
-CONFIG_OMFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_EXOFS_FS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=m
-CONFIG_NFS_FSCACHE=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_UPCALL=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_CIFS_DFS_UPCALL=y
-CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_SECURITY=y
-CONFIG_LSM_MMAP_MIN_ADDR=0
-CONFIG_SECURITY_SELINUX=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
-CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_SECURITY_SMACK=y
-CONFIG_SECURITY_TOMOYO=y
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_LZO=m
-CONFIG_CRC7=m
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_SCHEDSTATS=y
-CONFIG_SCHED_TRACER=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_KGDB=y
diff --git a/arch/mips/include/asm/cop2.h b/arch/mips/include/asm/cop2.h
index 6b7396a6a115..01b05be23a5d 100644
--- a/arch/mips/include/asm/cop2.h
+++ b/arch/mips/include/asm/cop2.h
@@ -22,17 +22,6 @@ extern void octeon_cop2_restore(struct octeon_cop2_state *);
#define cop2_present 1
#define cop2_lazy_restore 1
-#elif defined(CONFIG_CPU_XLP)
-
-extern void nlm_cop2_save(struct nlm_cop2_state *);
-extern void nlm_cop2_restore(struct nlm_cop2_state *);
-
-#define cop2_save(r) nlm_cop2_save(&(r)->thread.cp2)
-#define cop2_restore(r) nlm_cop2_restore(&(r)->thread.cp2)
-
-#define cop2_present 1
-#define cop2_lazy_restore 0
-
#elif defined(CONFIG_CPU_LOONGSON64)
#define cop2_present 1
diff --git a/arch/mips/include/asm/cpu-type.h b/arch/mips/include/asm/cpu-type.h
index 2be5d7b5de68..5efe8c8b854e 100644
--- a/arch/mips/include/asm/cpu-type.h
+++ b/arch/mips/include/asm/cpu-type.h
@@ -195,14 +195,6 @@ static inline int __pure __get_cpu_type(const int cpu_type)
#ifdef CONFIG_SYS_HAS_CPU_BMIPS5000
case CPU_BMIPS5000:
#endif
-
-#ifdef CONFIG_SYS_HAS_CPU_XLP
- case CPU_XLP:
-#endif
-
-#ifdef CONFIG_SYS_HAS_CPU_XLR
- case CPU_XLR:
-#endif
break;
default:
unreachable();
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index d45a52f65b7a..5c2f8d9cb7cf 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -328,7 +328,7 @@ enum cpu_type_enum {
*/
CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2EF,
CPU_LOONGSON64, CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS,
- CPU_CAVIUM_OCTEON2, CPU_CAVIUM_OCTEON3, CPU_XLR, CPU_XLP, CPU_I6500,
+ CPU_CAVIUM_OCTEON2, CPU_CAVIUM_OCTEON3, CPU_I6500,
CPU_QEMU_GENERIC,
diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
index f855478d12fa..cb16be93b048 100644
--- a/arch/mips/include/asm/hazards.h
+++ b/arch/mips/include/asm/hazards.h
@@ -160,7 +160,7 @@ do { \
#elif defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
defined(CONFIG_CPU_LOONGSON2EF) || defined(CONFIG_CPU_LOONGSON64) || \
- defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_R5500) || defined(CONFIG_CPU_XLR)
+ defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_R5500)
/*
* R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
diff --git a/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h b/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h
deleted file mode 100644
index 0c29ff820bb9..000000000000
--- a/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2011 Netlogic Microsystems
- * Copyright (C) 2003 Ralf Baechle
- */
-#ifndef __ASM_MACH_NETLOGIC_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_NETLOGIC_CPU_FEATURE_OVERRIDES_H
-
-#define cpu_has_4kex 1
-#define cpu_has_4k_cache 1
-#define cpu_has_watch 1
-#define cpu_has_mips16 0
-#define cpu_has_mips16e2 0
-#define cpu_has_counter 1
-#define cpu_has_divec 1
-#define cpu_has_vce 0
-#define cpu_has_cache_cdex_p 0
-#define cpu_has_cache_cdex_s 0
-#define cpu_has_prefetch 1
-#define cpu_has_mcheck 1
-#define cpu_has_ejtag 1
-
-#define cpu_has_llsc 1
-#define cpu_has_vtag_icache 0
-#define cpu_has_ic_fills_f_dc 1
-#define cpu_has_dsp 0
-#define cpu_has_dsp2 0
-#define cpu_has_mipsmt 0
-#define cpu_icache_snoops_remote_store 1
-
-#define cpu_has_64bits 1
-
-#define cpu_has_mips32r1 1
-#define cpu_has_mips64r1 1
-
-#define cpu_has_inclusive_pcaches 0
-
-#define cpu_dcache_line_size() 32
-#define cpu_icache_line_size() 32
-
-#if defined(CONFIG_CPU_XLR)
-#define cpu_has_userlocal 0
-#define cpu_has_dc_aliases 0
-#define cpu_has_mips32r2 0
-#define cpu_has_mips64r2 0
-#elif defined(CONFIG_CPU_XLP)
-#define cpu_has_userlocal 1
-#define cpu_has_mips32r2 1
-#define cpu_has_mips64r2 1
-#else
-#error "Unknown Netlogic CPU"
-#endif
-
-#endif /* __ASM_MACH_NETLOGIC_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-netlogic/irq.h b/arch/mips/include/asm/mach-netlogic/irq.h
deleted file mode 100644
index c0dbd530cca6..000000000000
--- a/arch/mips/include/asm/mach-netlogic/irq.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2011 Netlogic Microsystems.
- */
-#ifndef __ASM_NETLOGIC_IRQ_H
-#define __ASM_NETLOGIC_IRQ_H
-
-#include <asm/mach-netlogic/multi-node.h>
-#define NLM_IRQS_PER_NODE 1024
-#define NR_IRQS (NLM_IRQS_PER_NODE * NLM_NR_NODES)
-
-#define MIPS_CPU_IRQ_BASE 0
-
-#endif /* __ASM_NETLOGIC_IRQ_H */
diff --git a/arch/mips/include/asm/mach-netlogic/multi-node.h b/arch/mips/include/asm/mach-netlogic/multi-node.h
deleted file mode 100644
index 8bdf47e29145..000000000000
--- a/arch/mips/include/asm/mach-netlogic/multi-node.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (c) 2003-2012 Broadcom Corporation
- * All Rights Reserved
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the Broadcom
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _NETLOGIC_MULTI_NODE_H_
-#define _NETLOGIC_MULTI_NODE_H_
-
-#ifndef CONFIG_NLM_MULTINODE
-#define NLM_NR_NODES 1
-#else
-#if defined(CONFIG_NLM_MULTINODE_2)
-#define NLM_NR_NODES 2
-#elif defined(CONFIG_NLM_MULTINODE_4)
-#define NLM_NR_NODES 4
-#else
-#define NLM_NR_NODES 1
-#endif
-#endif
-
-#define NLM_THREADS_PER_CORE 4
-
-struct nlm_soc_info {
- unsigned long coremask; /* cores enabled on the soc */
- unsigned long ebase; /* not used now */
- uint64_t irqmask; /* EIMR for the node */
- uint64_t sysbase; /* only for XLP - sys block base */
- uint64_t picbase; /* PIC block base */
- spinlock_t piclock; /* lock for PIC access */
- cpumask_t cpumask; /* logical cpu mask for node */
- unsigned int socbus;
-};
-
-extern struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
-#define nlm_get_node(i) (&nlm_nodes[i])
-#define nlm_node_present(n) ((n) >= 0 && (n) < NLM_NR_NODES && \
- nlm_get_node(n)->coremask != 0)
-#ifdef CONFIG_CPU_XLR
-#define nlm_current_node() (&nlm_nodes[0])
-#else
-#define nlm_current_node() (&nlm_nodes[nlm_nodeid()])
-#endif
-void nlm_node_init(int node);
-
-#endif
diff --git a/arch/mips/include/asm/netlogic/common.h b/arch/mips/include/asm/netlogic/common.h
deleted file mode 100644
index 57616649b4f3..000000000000
--- a/arch/mips/include/asm/netlogic/common.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _NETLOGIC_COMMON_H_
-#define _NETLOGIC_COMMON_H_
-
-/*
- * Common SMP definitions
- */
-#define RESET_VEC_PHYS 0x1fc00000
-#define RESET_VEC_SIZE 8192 /* 8KB reset code and data */
-#define RESET_DATA_PHYS (RESET_VEC_PHYS + (1<<10))
-
-/* Offsets of parameters in the RESET_DATA_PHYS area */
-#define BOOT_THREAD_MODE 0
-#define BOOT_NMI_LOCK 4
-#define BOOT_NMI_HANDLER 8
-
-/* CPU ready flags for each CPU */
-#define BOOT_CPU_READY 2048
-
-#ifndef __ASSEMBLY__
-#include <linux/cpumask.h>
-#include <linux/spinlock.h>
-#include <asm/irq.h>
-#include <asm/mach-netlogic/multi-node.h>
-
-struct irq_desc;
-void nlm_smp_function_ipi_handler(struct irq_desc *desc);
-void nlm_smp_resched_ipi_handler(struct irq_desc *desc);
-void nlm_smp_irq_init(int hwcpuid);
-void nlm_boot_secondary_cpus(void);
-int nlm_wakeup_secondary_cpus(void);
-void nlm_rmiboot_preboot(void);
-void nlm_percpu_init(int hwcpuid);
-
-static inline void *
-nlm_get_boot_data(int offset)
-{
- return (void *)(CKSEG1ADDR(RESET_DATA_PHYS) + offset);
-}
-
-static inline void
-nlm_set_nmi_handler(void *handler)
-{
- void *nmih = nlm_get_boot_data(BOOT_NMI_HANDLER);
-
- *(int64_t *)nmih = (long)handler;
-}
-
-/*
- * Misc.
- */
-void nlm_init_boot_cpu(void);
-unsigned int nlm_get_cpu_frequency(void);
-extern const struct plat_smp_ops nlm_smp_ops;
-extern char nlm_reset_entry[], nlm_reset_entry_end[];
-
-extern unsigned int nlm_threads_per_core;
-extern cpumask_t nlm_cpumask;
-
-struct irq_data;
-uint64_t nlm_pci_irqmask(int node);
-void nlm_setup_pic_irq(int node, int picirq, int irq, int irt);
-void nlm_set_pic_extra_ack(int node, int irq, void (*xack)(struct irq_data *));
-
-#ifdef CONFIG_PCI_MSI
-void nlm_dispatch_msi(int node, int lirq);
-void nlm_dispatch_msix(int node, int msixirq);
-#endif
-
-/*
- * The NR_IRQs is divided between nodes, each of them has a separate irq space
- */
-static inline int nlm_irq_to_xirq(int node, int irq)
-{
- return node * NR_IRQS / NLM_NR_NODES + irq;
-}
-
-#ifdef CONFIG_CPU_XLR
-#define nlm_cores_per_node() 8
-#else
-static inline int nlm_cores_per_node(void)
-{
- return ((read_c0_prid() & PRID_IMP_MASK)
- == PRID_IMP_NETLOGIC_XLP9XX) ? 32 : 8;
-}
-#endif
-static inline int nlm_threads_per_node(void)
-{
- return nlm_cores_per_node() * NLM_THREADS_PER_CORE;
-}
-
-static inline int nlm_hwtid_to_node(int hwtid)
-{
- return hwtid / nlm_threads_per_node();
-}
-
-extern int nlm_cpu_ready[];
-#endif /* __ASSEMBLY__ */
-#endif /* _NETLOGIC_COMMON_H_ */
diff --git a/arch/mips/include/asm/netlogic/haldefs.h b/arch/mips/include/asm/netlogic/haldefs.h
deleted file mode 100644
index 79c7cccdc22c..000000000000
--- a/arch/mips/include/asm/netlogic/haldefs.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef __NLM_HAL_HALDEFS_H__
-#define __NLM_HAL_HALDEFS_H__
-
-#include <linux/irqflags.h> /* for local_irq_disable */
-
-/*
- * This file contains platform specific memory mapped IO implementation
- * and will provide a way to read 32/64 bit memory mapped registers in
- * all ABIs
- */
-static inline uint32_t
-nlm_read_reg(uint64_t base, uint32_t reg)
-{
- volatile uint32_t *addr = (volatile uint32_t *)(long)base + reg;
-
- return *addr;
-}
-
-static inline void
-nlm_write_reg(uint64_t base, uint32_t reg, uint32_t val)
-{
- volatile uint32_t *addr = (volatile uint32_t *)(long)base + reg;
-
- *addr = val;
-}
-
-/*
- * For o32 compilation, we have to disable interrupts to access 64 bit
- * registers
- *
- * We need to disable interrupts because we save just the lower 32 bits of
- * registers in interrupt handling. So if we get hit by an interrupt while
- * using the upper 32 bits of a register, we lose.
- */
-
-static inline uint64_t
-nlm_read_reg64(uint64_t base, uint32_t reg)
-{
- uint64_t addr = base + (reg >> 1) * sizeof(uint64_t);
- volatile uint64_t *ptr = (volatile uint64_t *)(long)addr;
- uint64_t val;
-
- if (sizeof(unsigned long) == 4) {
- unsigned long flags;
-
- local_irq_save(flags);
- __asm__ __volatile__(
- ".set push" "\n\t"
- ".set mips64" "\n\t"
- "ld %L0, %1" "\n\t"
- "dsra32 %M0, %L0, 0" "\n\t"
- "sll %L0, %L0, 0" "\n\t"
- ".set pop" "\n"
- : "=r" (val)
- : "m" (*ptr));
- local_irq_restore(flags);
- } else
- val = *ptr;
-
- return val;
-}
-
-static inline void
-nlm_write_reg64(uint64_t base, uint32_t reg, uint64_t val)
-{
- uint64_t addr = base + (reg >> 1) * sizeof(uint64_t);
- volatile uint64_t *ptr = (volatile uint64_t *)(long)addr;
-
- if (sizeof(unsigned long) == 4) {
- unsigned long flags;
- uint64_t tmp;
-
- local_irq_save(flags);
- __asm__ __volatile__(
- ".set push" "\n\t"
- ".set mips64" "\n\t"
- "dsll32 %L0, %L0, 0" "\n\t"
- "dsrl32 %L0, %L0, 0" "\n\t"
- "dsll32 %M0, %M0, 0" "\n\t"
- "or %L0, %L0, %M0" "\n\t"
- "sd %L0, %2" "\n\t"
- ".set pop" "\n"
- : "=r" (tmp)
- : "0" (val), "m" (*ptr));
- local_irq_restore(flags);
- } else
- *ptr = val;
-}
-
-/*
- * Routines to store 32/64 bit values to 64 bit addresses,
- * used when going thru XKPHYS to access registers
- */
-static inline uint32_t
-nlm_read_reg_xkphys(uint64_t base, uint32_t reg)
-{
- return nlm_read_reg(base, reg);
-}
-
-static inline void
-nlm_write_reg_xkphys(uint64_t base, uint32_t reg, uint32_t val)
-{
- nlm_write_reg(base, reg, val);
-}
-
-static inline uint64_t
-nlm_read_reg64_xkphys(uint64_t base, uint32_t reg)
-{
- return nlm_read_reg64(base, reg);
-}
-
-static inline void
-nlm_write_reg64_xkphys(uint64_t base, uint32_t reg, uint64_t val)
-{
- nlm_write_reg64(base, reg, val);
-}
-
-/* Location where IO base is mapped */
-extern uint64_t nlm_io_base;
-
-#if defined(CONFIG_CPU_XLP)
-static inline uint64_t
-nlm_pcicfg_base(uint32_t devoffset)
-{
- return nlm_io_base + devoffset;
-}
-
-#elif defined(CONFIG_CPU_XLR)
-
-static inline uint64_t
-nlm_mmio_base(uint32_t devoffset)
-{
- return nlm_io_base + devoffset;
-}
-#endif
-
-#endif
diff --git a/arch/mips/include/asm/netlogic/interrupt.h b/arch/mips/include/asm/netlogic/interrupt.h
deleted file mode 100644
index ed5993d9b7b8..000000000000
--- a/arch/mips/include/asm/netlogic/interrupt.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _ASM_NLM_INTERRUPT_H
-#define _ASM_NLM_INTERRUPT_H
-
-/* Defines for the IRQ numbers */
-
-#define IRQ_IPI_SMP_FUNCTION 3
-#define IRQ_IPI_SMP_RESCHEDULE 4
-#define IRQ_FMN 5
-#define IRQ_TIMER 7
-
-#endif
diff --git a/arch/mips/include/asm/netlogic/mips-extns.h b/arch/mips/include/asm/netlogic/mips-extns.h
deleted file mode 100644
index 788baf399e69..000000000000
--- a/arch/mips/include/asm/netlogic/mips-extns.h
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _ASM_NLM_MIPS_EXTS_H
-#define _ASM_NLM_MIPS_EXTS_H
-
-/*
- * XLR and XLP interrupt request and interrupt mask registers
- */
-/*
- * NOTE: Do not save/restore flags around write_c0_eimr().
- * On non-R2 platforms the flags has part of EIMR that is shadowed in STATUS
- * register. Restoring flags will overwrite the lower 8 bits of EIMR.
- *
- * Call with interrupts disabled.
- */
-#define write_c0_eimr(val) \
-do { \
- if (sizeof(unsigned long) == 4) { \
- __asm__ __volatile__( \
- ".set\tmips64\n\t" \
- "dsll\t%L0, %L0, 32\n\t" \
- "dsrl\t%L0, %L0, 32\n\t" \
- "dsll\t%M0, %M0, 32\n\t" \
- "or\t%L0, %L0, %M0\n\t" \
- "dmtc0\t%L0, $9, 7\n\t" \
- ".set\tmips0" \
- : : "r" (val)); \
- } else \
- __write_64bit_c0_register($9, 7, (val)); \
-} while (0)
-
-/*
- * Handling the 64 bit EIMR and EIRR registers in 32-bit mode with
- * standard functions will be very inefficient. This provides
- * optimized functions for the normal operations on the registers.
- *
- * Call with interrupts disabled.
- */
-static inline void ack_c0_eirr(int irq)
-{
- __asm__ __volatile__(
- ".set push\n\t"
- ".set mips64\n\t"
- ".set noat\n\t"
- "li $1, 1\n\t"
- "dsllv $1, $1, %0\n\t"
- "dmtc0 $1, $9, 6\n\t"
- ".set pop"
- : : "r" (irq));
-}
-
-static inline void set_c0_eimr(int irq)
-{
- __asm__ __volatile__(
- ".set push\n\t"
- ".set mips64\n\t"
- ".set noat\n\t"
- "li $1, 1\n\t"
- "dsllv %0, $1, %0\n\t"
- "dmfc0 $1, $9, 7\n\t"
- "or $1, %0\n\t"
- "dmtc0 $1, $9, 7\n\t"
- ".set pop"
- : "+r" (irq));
-}
-
-static inline void clear_c0_eimr(int irq)
-{
- __asm__ __volatile__(
- ".set push\n\t"
- ".set mips64\n\t"
- ".set noat\n\t"
- "li $1, 1\n\t"
- "dsllv %0, $1, %0\n\t"
- "dmfc0 $1, $9, 7\n\t"
- "or $1, %0\n\t"
- "xor $1, %0\n\t"
- "dmtc0 $1, $9, 7\n\t"
- ".set pop"
- : "+r" (irq));
-}
-
-/*
- * Read c0 eimr and c0 eirr, do AND of the two values, the result is
- * the interrupts which are raised and are not masked.
- */
-static inline uint64_t read_c0_eirr_and_eimr(void)
-{
- uint64_t val;
-
-#ifdef CONFIG_64BIT
- val = __read_64bit_c0_register($9, 6) & __read_64bit_c0_register($9, 7);
-#else
- __asm__ __volatile__(
- ".set push\n\t"
- ".set mips64\n\t"
- ".set noat\n\t"
- "dmfc0 %M0, $9, 6\n\t"
- "dmfc0 %L0, $9, 7\n\t"
- "and %M0, %L0\n\t"
- "dsll %L0, %M0, 32\n\t"
- "dsra %M0, %M0, 32\n\t"
- "dsra %L0, %L0, 32\n\t"
- ".set pop"
- : "=r" (val));
-#endif
- return val;
-}
-
-static inline int hard_smp_processor_id(void)
-{
- return __read_32bit_c0_register($15, 1) & 0x3ff;
-}
-
-static inline int nlm_nodeid(void)
-{
- uint32_t prid = read_c0_prid() & PRID_IMP_MASK;
-
- if ((prid == PRID_IMP_NETLOGIC_XLP9XX) ||
- (prid == PRID_IMP_NETLOGIC_XLP5XX))
- return (__read_32bit_c0_register($15, 1) >> 7) & 0x7;
- else
- return (__read_32bit_c0_register($15, 1) >> 5) & 0x3;
-}
-
-static inline unsigned int nlm_core_id(void)
-{
- uint32_t prid = read_c0_prid() & PRID_IMP_MASK;
-
- if ((prid == PRID_IMP_NETLOGIC_XLP9XX) ||
- (prid == PRID_IMP_NETLOGIC_XLP5XX))
- return (read_c0_ebase() & 0x7c) >> 2;
- else
- return (read_c0_ebase() & 0x1c) >> 2;
-}
-
-static inline unsigned int nlm_thread_id(void)
-{
- return read_c0_ebase() & 0x3;
-}
-
-#define __read_64bit_c2_split(source, sel) \
-({ \
- unsigned long long __val; \
- unsigned long __flags; \
- \
- local_irq_save(__flags); \
- if (sel == 0) \
- __asm__ __volatile__( \
- ".set\tmips64\n\t" \
- "dmfc2\t%M0, " #source "\n\t" \
- "dsll\t%L0, %M0, 32\n\t" \
- "dsra\t%M0, %M0, 32\n\t" \
- "dsra\t%L0, %L0, 32\n\t" \
- ".set\tmips0\n\t" \
- : "=r" (__val)); \
- else \
- __asm__ __volatile__( \
- ".set\tmips64\n\t" \
- "dmfc2\t%M0, " #source ", " #sel "\n\t" \
- "dsll\t%L0, %M0, 32\n\t" \
- "dsra\t%M0, %M0, 32\n\t" \
- "dsra\t%L0, %L0, 32\n\t" \
- ".set\tmips0\n\t" \
- : "=r" (__val)); \
- local_irq_restore(__flags); \
- \
- __val; \
-})
-
-#define __write_64bit_c2_split(source, sel, val) \
-do { \
- unsigned long __flags; \
- \
- local_irq_save(__flags); \
- if (sel == 0) \
- __asm__ __volatile__( \
- ".set\tmips64\n\t" \
- "dsll\t%L0, %L0, 32\n\t" \
- "dsrl\t%L0, %L0, 32\n\t" \
- "dsll\t%M0, %M0, 32\n\t" \
- "or\t%L0, %L0, %M0\n\t" \
- "dmtc2\t%L0, " #source "\n\t" \
- ".set\tmips0\n\t" \
- : : "r" (val)); \
- else \
- __asm__ __volatile__( \
- ".set\tmips64\n\t" \
- "dsll\t%L0, %L0, 32\n\t" \
- "dsrl\t%L0, %L0, 32\n\t" \
- "dsll\t%M0, %M0, 32\n\t" \
- "or\t%L0, %L0, %M0\n\t" \
- "dmtc2\t%L0, " #source ", " #sel "\n\t" \
- ".set\tmips0\n\t" \
- : : "r" (val)); \
- local_irq_restore(__flags); \
-} while (0)
-
-#define __read_32bit_c2_register(source, sel) \
-({ uint32_t __res; \
- if (sel == 0) \
- __asm__ __volatile__( \
- ".set\tmips32\n\t" \
- "mfc2\t%0, " #source "\n\t" \
- ".set\tmips0\n\t" \
- : "=r" (__res)); \
- else \
- __asm__ __volatile__( \
- ".set\tmips32\n\t" \
- "mfc2\t%0, " #source ", " #sel "\n\t" \
- ".set\tmips0\n\t" \
- : "=r" (__res)); \
- __res; \
-})
-
-#define __read_64bit_c2_register(source, sel) \
-({ unsigned long long __res; \
- if (sizeof(unsigned long) == 4) \
- __res = __read_64bit_c2_split(source, sel); \
- else if (sel == 0) \
- __asm__ __volatile__( \
- ".set\tmips64\n\t" \
- "dmfc2\t%0, " #source "\n\t" \
- ".set\tmips0\n\t" \
- : "=r" (__res)); \
- else \
- __asm__ __volatile__( \
- ".set\tmips64\n\t" \
- "dmfc2\t%0, " #source ", " #sel "\n\t" \
- ".set\tmips0\n\t" \
- : "=r" (__res)); \
- __res; \
-})
-
-#define __write_64bit_c2_register(register, sel, value) \
-do { \
- if (sizeof(unsigned long) == 4) \
- __write_64bit_c2_split(register, sel, value); \
- else if (sel == 0) \
- __asm__ __volatile__( \
- ".set\tmips64\n\t" \
- "dmtc2\t%z0, " #register "\n\t" \
- ".set\tmips0\n\t" \
- : : "Jr" (value)); \
- else \
- __asm__ __volatile__( \
- ".set\tmips64\n\t" \
- "dmtc2\t%z0, " #register ", " #sel "\n\t" \
- ".set\tmips0\n\t" \
- : : "Jr" (value)); \
-} while (0)
-
-#define __write_32bit_c2_register(reg, sel, value) \
-({ \
- if (sel == 0) \
- __asm__ __volatile__( \
- ".set\tmips32\n\t" \
- "mtc2\t%z0, " #reg "\n\t" \
- ".set\tmips0\n\t" \
- : : "Jr" (value)); \
- else \
- __asm__ __volatile__( \
- ".set\tmips32\n\t" \
- "mtc2\t%z0, " #reg ", " #sel "\n\t" \
- ".set\tmips0\n\t" \
- : : "Jr" (value)); \
-})
-
-#endif /*_ASM_NLM_MIPS_EXTS_H */
diff --git a/arch/mips/include/asm/netlogic/psb-bootinfo.h b/arch/mips/include/asm/netlogic/psb-bootinfo.h
deleted file mode 100644
index c716e9397113..000000000000
--- a/arch/mips/include/asm/netlogic/psb-bootinfo.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _ASM_NETLOGIC_BOOTINFO_H
-#define _ASM_NETLOGIC_BOOTINFO_H
-
-struct psb_info {
- uint64_t boot_level;
- uint64_t io_base;
- uint64_t output_device;
- uint64_t uart_print;
- uint64_t led_output;
- uint64_t init;
- uint64_t exit;
- uint64_t warm_reset;
- uint64_t wakeup;
- uint64_t online_cpu_map;
- uint64_t master_reentry_sp;
- uint64_t master_reentry_gp;
- uint64_t master_reentry_fn;
- uint64_t slave_reentry_fn;
- uint64_t magic_dword;
- uint64_t uart_putchar;
- uint64_t size;
- uint64_t uart_getchar;
- uint64_t nmi_handler;
- uint64_t psb_version;
- uint64_t mac_addr;
- uint64_t cpu_frequency;
- uint64_t board_version;
- uint64_t malloc;
- uint64_t free;
- uint64_t global_shmem_addr;
- uint64_t global_shmem_size;
- uint64_t psb_os_cpu_map;
- uint64_t userapp_cpu_map;
- uint64_t wakeup_os;
- uint64_t psb_mem_map;
- uint64_t board_major_version;
- uint64_t board_minor_version;
- uint64_t board_manf_revision;
- uint64_t board_serial_number;
- uint64_t psb_physaddr_map;
- uint64_t xlr_loaderip_config;
- uint64_t bldr_envp;
- uint64_t avail_mem_map;
-};
-
-/* This is what netlboot passes and linux boot_mem_map is subtly different */
-#define NLM_BOOT_MEM_MAP_MAX 32
-struct nlm_boot_mem_map {
- int nr_map;
- struct nlm_boot_mem_map_entry {
- uint64_t addr; /* start of memory segment */
- uint64_t size; /* size of memory segment */
- uint32_t type; /* type of memory segment */
- } map[NLM_BOOT_MEM_MAP_MAX];
-};
-#define NLM_BOOT_MEM_RAM 1
-
-/* Pointer to saved boot loader info */
-extern struct psb_info nlm_prom_info;
-
-#endif
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/bridge.h b/arch/mips/include/asm/netlogic/xlp-hal/bridge.h
deleted file mode 100644
index 3067f983495d..000000000000
--- a/arch/mips/include/asm/netlogic/xlp-hal/bridge.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef __NLM_HAL_BRIDGE_H__
-#define __NLM_HAL_BRIDGE_H__
-
-/**
-* @file_name mio.h
-* @author Netlogic Microsystems
-* @brief Basic definitions of XLP memory and io subsystem
-*/
-
-/*
- * BRIDGE specific registers
- *
- * These registers start after the PCIe header, which has 0x40
- * standard entries
- */
-#define BRIDGE_MODE 0x00
-#define BRIDGE_PCI_CFG_BASE 0x01
-#define BRIDGE_PCI_CFG_LIMIT 0x02
-#define BRIDGE_PCIE_CFG_BASE 0x03
-#define BRIDGE_PCIE_CFG_LIMIT 0x04
-#define BRIDGE_BUSNUM_BAR0 0x05
-#define BRIDGE_BUSNUM_BAR1 0x06
-#define BRIDGE_BUSNUM_BAR2 0x07
-#define BRIDGE_BUSNUM_BAR3 0x08
-#define BRIDGE_BUSNUM_BAR4 0x09
-#define BRIDGE_BUSNUM_BAR5 0x0a
-#define BRIDGE_BUSNUM_BAR6 0x0b
-#define BRIDGE_FLASH_BAR0 0x0c
-#define BRIDGE_FLASH_BAR1 0x0d
-#define BRIDGE_FLASH_BAR2 0x0e
-#define BRIDGE_FLASH_BAR3 0x0f
-#define BRIDGE_FLASH_LIMIT0 0x10
-#define BRIDGE_FLASH_LIMIT1 0x11
-#define BRIDGE_FLASH_LIMIT2 0x12
-#define BRIDGE_FLASH_LIMIT3 0x13
-
-#define BRIDGE_DRAM_BAR(i) (0x14 + (i))
-#define BRIDGE_DRAM_LIMIT(i) (0x1c + (i))
-#define BRIDGE_DRAM_NODE_TRANSLN(i) (0x24 + (i))
-#define BRIDGE_DRAM_CHNL_TRANSLN(i) (0x2c + (i))
-
-#define BRIDGE_PCIEMEM_BASE0 0x34
-#define BRIDGE_PCIEMEM_BASE1 0x35
-#define BRIDGE_PCIEMEM_BASE2 0x36
-#define BRIDGE_PCIEMEM_BASE3 0x37
-#define BRIDGE_PCIEMEM_LIMIT0 0x38
-#define BRIDGE_PCIEMEM_LIMIT1 0x39
-#define BRIDGE_PCIEMEM_LIMIT2 0x3a
-#define BRIDGE_PCIEMEM_LIMIT3 0x3b
-#define BRIDGE_PCIEIO_BASE0 0x3c
-#define BRIDGE_PCIEIO_BASE1 0x3d
-#define BRIDGE_PCIEIO_BASE2 0x3e
-#define BRIDGE_PCIEIO_BASE3 0x3f
-#define BRIDGE_PCIEIO_LIMIT0 0x40
-#define BRIDGE_PCIEIO_LIMIT1 0x41
-#define BRIDGE_PCIEIO_LIMIT2 0x42
-#define BRIDGE_PCIEIO_LIMIT3 0x43
-#define BRIDGE_PCIEMEM_BASE4 0x44
-#define BRIDGE_PCIEMEM_BASE5 0x45
-#define BRIDGE_PCIEMEM_BASE6 0x46
-#define BRIDGE_PCIEMEM_LIMIT4 0x47
-#define BRIDGE_PCIEMEM_LIMIT5 0x48
-#define BRIDGE_PCIEMEM_LIMIT6 0x49
-#define BRIDGE_PCIEIO_BASE4 0x4a
-#define BRIDGE_PCIEIO_BASE5 0x4b
-#define BRIDGE_PCIEIO_BASE6 0x4c
-#define BRIDGE_PCIEIO_LIMIT4 0x4d
-#define BRIDGE_PCIEIO_LIMIT5 0x4e
-#define BRIDGE_PCIEIO_LIMIT6 0x4f
-#define BRIDGE_NBU_EVENT_CNT_CTL 0x50
-#define BRIDGE_EVNTCTR1_LOW 0x51
-#define BRIDGE_EVNTCTR1_HI 0x52
-#define BRIDGE_EVNT_CNT_CTL2 0x53
-#define BRIDGE_EVNTCTR2_LOW 0x54
-#define BRIDGE_EVNTCTR2_HI 0x55
-#define BRIDGE_TRACEBUF_MATCH0 0x56
-#define BRIDGE_TRACEBUF_MATCH1 0x57
-#define BRIDGE_TRACEBUF_MATCH_LOW 0x58
-#define BRIDGE_TRACEBUF_MATCH_HI 0x59
-#define BRIDGE_TRACEBUF_CTRL 0x5a
-#define BRIDGE_TRACEBUF_INIT 0x5b
-#define BRIDGE_TRACEBUF_ACCESS 0x5c
-#define BRIDGE_TRACEBUF_READ_DATA0 0x5d
-#define BRIDGE_TRACEBUF_READ_DATA1 0x5d
-#define BRIDGE_TRACEBUF_READ_DATA2 0x5f
-#define BRIDGE_TRACEBUF_READ_DATA3 0x60
-#define BRIDGE_TRACEBUF_STATUS 0x61
-#define BRIDGE_ADDRESS_ERROR0 0x62
-#define BRIDGE_ADDRESS_ERROR1 0x63
-#define BRIDGE_ADDRESS_ERROR2 0x64
-#define BRIDGE_TAG_ECC_ADDR_ERROR0 0x65
-#define BRIDGE_TAG_ECC_ADDR_ERROR1 0x66
-#define BRIDGE_TAG_ECC_ADDR_ERROR2 0x67
-#define BRIDGE_LINE_FLUSH0 0x68
-#define BRIDGE_LINE_FLUSH1 0x69
-#define BRIDGE_NODE_ID 0x6a
-#define BRIDGE_ERROR_INTERRUPT_EN 0x6b
-#define BRIDGE_PCIE0_WEIGHT 0x2c0
-#define BRIDGE_PCIE1_WEIGHT 0x2c1
-#define BRIDGE_PCIE2_WEIGHT 0x2c2
-#define BRIDGE_PCIE3_WEIGHT 0x2c3
-#define BRIDGE_USB_WEIGHT 0x2c4
-#define BRIDGE_NET_WEIGHT 0x2c5
-#define BRIDGE_POE_WEIGHT 0x2c6
-#define BRIDGE_CMS_WEIGHT 0x2c7
-#define BRIDGE_DMAENG_WEIGHT 0x2c8
-#define BRIDGE_SEC_WEIGHT 0x2c9
-#define BRIDGE_COMP_WEIGHT 0x2ca
-#define BRIDGE_GIO_WEIGHT 0x2cb
-#define BRIDGE_FLASH_WEIGHT 0x2cc
-
-/* FIXME verify */
-#define BRIDGE_9XX_FLASH_BAR(i) (0x11 + (i))
-#define BRIDGE_9XX_FLASH_BAR_LIMIT(i) (0x15 + (i))
-
-#define BRIDGE_9XX_DRAM_BAR(i) (0x19 + (i))
-#define BRIDGE_9XX_DRAM_LIMIT(i) (0x29 + (i))
-#define BRIDGE_9XX_DRAM_NODE_TRANSLN(i) (0x39 + (i))
-#define BRIDGE_9XX_DRAM_CHNL_TRANSLN(i) (0x49 + (i))
-
-#define BRIDGE_9XX_ADDRESS_ERROR0 0x9d
-#define BRIDGE_9XX_ADDRESS_ERROR1 0x9e
-#define BRIDGE_9XX_ADDRESS_ERROR2 0x9f
-
-#define BRIDGE_9XX_PCIEMEM_BASE0 0x59
-#define BRIDGE_9XX_PCIEMEM_BASE1 0x5a
-#define BRIDGE_9XX_PCIEMEM_BASE2 0x5b
-#define BRIDGE_9XX_PCIEMEM_BASE3 0x5c
-#define BRIDGE_9XX_PCIEMEM_LIMIT0 0x5d
-#define BRIDGE_9XX_PCIEMEM_LIMIT1 0x5e
-#define BRIDGE_9XX_PCIEMEM_LIMIT2 0x5f
-#define BRIDGE_9XX_PCIEMEM_LIMIT3 0x60
-#define BRIDGE_9XX_PCIEIO_BASE0 0x61
-#define BRIDGE_9XX_PCIEIO_BASE1 0x62
-#define BRIDGE_9XX_PCIEIO_BASE2 0x63
-#define BRIDGE_9XX_PCIEIO_BASE3 0x64
-#define BRIDGE_9XX_PCIEIO_LIMIT0 0x65
-#define BRIDGE_9XX_PCIEIO_LIMIT1 0x66
-#define BRIDGE_9XX_PCIEIO_LIMIT2 0x67
-#define BRIDGE_9XX_PCIEIO_LIMIT3 0x68
-
-#ifndef __ASSEMBLY__
-
-#define nlm_read_bridge_reg(b, r) nlm_read_reg(b, r)
-#define nlm_write_bridge_reg(b, r, v) nlm_write_reg(b, r, v)
-#define nlm_get_bridge_pcibase(node) nlm_pcicfg_base(cpu_is_xlp9xx() ? \
- XLP9XX_IO_BRIDGE_OFFSET(node) : XLP_IO_BRIDGE_OFFSET(node))
-#define nlm_get_bridge_regbase(node) \
- (nlm_get_bridge_pcibase(node) + XLP_IO_PCI_HDRSZ)
-
-#endif /* __ASSEMBLY__ */
-#endif /* __NLM_HAL_BRIDGE_H__ */
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h b/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h
deleted file mode 100644
index a06b59292153..000000000000
--- a/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef __NLM_HAL_CPUCONTROL_H__
-#define __NLM_HAL_CPUCONTROL_H__
-
-#define CPU_BLOCKID_IFU 0
-#define CPU_BLOCKID_ICU 1
-#define CPU_BLOCKID_IEU 2
-#define CPU_BLOCKID_LSU 3
-#define CPU_BLOCKID_MMU 4
-#define CPU_BLOCKID_PRF 5
-#define CPU_BLOCKID_SCH 7
-#define CPU_BLOCKID_SCU 8
-#define CPU_BLOCKID_FPU 9
-#define CPU_BLOCKID_MAP 10
-
-#define IFU_BRUB_RESERVE 0x007
-
-#define ICU_DEFEATURE 0x100
-
-#define LSU_DEFEATURE 0x304
-#define LSU_DEBUG_ADDR 0x305
-#define LSU_DEBUG_DATA0 0x306
-#define LSU_CERRLOG_REGID 0x309
-#define SCHED_DEFEATURE 0x700
-
-/* Offsets of interest from the 'MAP' Block */
-#define MAP_THREADMODE 0x00
-#define MAP_EXT_EBASE_ENABLE 0x04
-#define MAP_CCDI_CONFIG 0x08
-#define MAP_THRD0_CCDI_STATUS 0x0c
-#define MAP_THRD1_CCDI_STATUS 0x10
-#define MAP_THRD2_CCDI_STATUS 0x14
-#define MAP_THRD3_CCDI_STATUS 0x18
-#define MAP_THRD0_DEBUG_MODE 0x1c
-#define MAP_THRD1_DEBUG_MODE 0x20
-#define MAP_THRD2_DEBUG_MODE 0x24
-#define MAP_THRD3_DEBUG_MODE 0x28
-#define MAP_MISC_STATE 0x60
-#define MAP_DEBUG_READ_CTL 0x64
-#define MAP_DEBUG_READ_REG0 0x68
-#define MAP_DEBUG_READ_REG1 0x6c
-
-#define MMU_SETUP 0x400
-#define MMU_LFSRSEED 0x401
-#define MMU_HPW_NUM_PAGE_LVL 0x410
-#define MMU_PGWKR_PGDBASE 0x411
-#define MMU_PGWKR_PGDSHFT 0x412
-#define MMU_PGWKR_PGDMASK 0x413
-#define MMU_PGWKR_PUDSHFT 0x414
-#define MMU_PGWKR_PUDMASK 0x415
-#define MMU_PGWKR_PMDSHFT 0x416
-#define MMU_PGWKR_PMDMASK 0x417
-#define MMU_PGWKR_PTESHFT 0x418
-#define MMU_PGWKR_PTEMASK 0x419
-
-#endif /* __NLM_CPUCONTROL_H__ */
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/iomap.h b/arch/mips/include/asm/netlogic/xlp-hal/iomap.h
deleted file mode 100644
index 805bfd21f33e..000000000000
--- a/arch/mips/include/asm/netlogic/xlp-hal/iomap.h
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef __NLM_HAL_IOMAP_H__
-#define __NLM_HAL_IOMAP_H__
-
-#define XLP_DEFAULT_IO_BASE 0x18000000
-#define XLP_DEFAULT_PCI_ECFG_BASE XLP_DEFAULT_IO_BASE
-#define XLP_DEFAULT_PCI_CFG_BASE 0x1c000000
-
-#define NMI_BASE 0xbfc00000
-#define XLP_IO_CLK 133333333
-
-#define XLP_PCIE_CFG_SIZE 0x1000 /* 4K */
-#define XLP_PCIE_DEV_BLK_SIZE (8 * XLP_PCIE_CFG_SIZE)
-#define XLP_PCIE_BUS_BLK_SIZE (256 * XLP_PCIE_DEV_BLK_SIZE)
-#define XLP_IO_SIZE (64 << 20) /* ECFG space size */
-#define XLP_IO_PCI_HDRSZ 0x100
-#define XLP_IO_DEV(node, dev) ((dev) + (node) * 8)
-#define XLP_IO_PCI_OFFSET(b, d, f) (((b) << 20) | ((d) << 15) | ((f) << 12))
-
-#define XLP_HDR_OFFSET(node, bus, dev, fn) \
- XLP_IO_PCI_OFFSET(bus, XLP_IO_DEV(node, dev), fn)
-
-#define XLP_IO_BRIDGE_OFFSET(node) XLP_HDR_OFFSET(node, 0, 0, 0)
-/* coherent inter chip */
-#define XLP_IO_CIC0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 0, 1)
-#define XLP_IO_CIC1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 0, 2)
-#define XLP_IO_CIC2_OFFSET(node) XLP_HDR_OFFSET(node, 0, 0, 3)
-#define XLP_IO_PIC_OFFSET(node) XLP_HDR_OFFSET(node, 0, 0, 4)
-
-#define XLP_IO_PCIE_OFFSET(node, i) XLP_HDR_OFFSET(node, 0, 1, i)
-#define XLP_IO_PCIE0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 1, 0)
-#define XLP_IO_PCIE1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 1, 1)
-#define XLP_IO_PCIE2_OFFSET(node) XLP_HDR_OFFSET(node, 0, 1, 2)
-#define XLP_IO_PCIE3_OFFSET(node) XLP_HDR_OFFSET(node, 0, 1, 3)
-
-#define XLP_IO_USB_OFFSET(node, i) XLP_HDR_OFFSET(node, 0, 2, i)
-#define XLP_IO_USB_EHCI0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 0)
-#define XLP_IO_USB_OHCI0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 1)
-#define XLP_IO_USB_OHCI1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 2)
-#define XLP_IO_USB_EHCI1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 3)
-#define XLP_IO_USB_OHCI2_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 4)
-#define XLP_IO_USB_OHCI3_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 5)
-
-#define XLP_IO_SATA_OFFSET(node) XLP_HDR_OFFSET(node, 0, 3, 2)
-
-/* XLP2xx has an updated USB block */
-#define XLP2XX_IO_USB_OFFSET(node, i) XLP_HDR_OFFSET(node, 0, 4, i)
-#define XLP2XX_IO_USB_XHCI0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 4, 1)
-#define XLP2XX_IO_USB_XHCI1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 4, 2)
-#define XLP2XX_IO_USB_XHCI2_OFFSET(node) XLP_HDR_OFFSET(node, 0, 4, 3)
-
-#define XLP_IO_NAE_OFFSET(node) XLP_HDR_OFFSET(node, 0, 3, 0)
-#define XLP_IO_POE_OFFSET(node) XLP_HDR_OFFSET(node, 0, 3, 1)
-
-#define XLP_IO_CMS_OFFSET(node) XLP_HDR_OFFSET(node, 0, 4, 0)
-
-#define XLP_IO_DMA_OFFSET(node) XLP_HDR_OFFSET(node, 0, 5, 1)
-#define XLP_IO_SEC_OFFSET(node) XLP_HDR_OFFSET(node, 0, 5, 2)
-#define XLP_IO_CMP_OFFSET(node) XLP_HDR_OFFSET(node, 0, 5, 3)
-
-#define XLP_IO_UART_OFFSET(node, i) XLP_HDR_OFFSET(node, 0, 6, i)
-#define XLP_IO_UART0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 0)
-#define XLP_IO_UART1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 1)
-#define XLP_IO_I2C_OFFSET(node, i) XLP_HDR_OFFSET(node, 0, 6, 2 + i)
-#define XLP_IO_I2C0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 2)
-#define XLP_IO_I2C1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 3)
-#define XLP_IO_GPIO_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 4)
-/* on 2XX, all I2C busses are on the same block */
-#define XLP2XX_IO_I2C_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 7)
-
-/* system management */
-#define XLP_IO_SYS_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 5)
-#define XLP_IO_JTAG_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 6)
-
-/* Flash */
-#define XLP_IO_NOR_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 0)
-#define XLP_IO_NAND_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 1)
-#define XLP_IO_SPI_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 2)
-#define XLP_IO_MMC_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 3)
-
-/* Things have changed drastically in XLP 9XX */
-#define XLP9XX_HDR_OFFSET(n, d, f) \
- XLP_IO_PCI_OFFSET(xlp9xx_get_socbus(n), d, f)
-
-#define XLP9XX_IO_BRIDGE_OFFSET(node) XLP_IO_PCI_OFFSET(0, 0, node)
-#define XLP9XX_IO_PIC_OFFSET(node) XLP9XX_HDR_OFFSET(node, 2, 0)
-#define XLP9XX_IO_UART_OFFSET(node) XLP9XX_HDR_OFFSET(node, 2, 2)
-#define XLP9XX_IO_SYS_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 0)
-#define XLP9XX_IO_FUSE_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 1)
-#define XLP9XX_IO_CLOCK_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 2)
-#define XLP9XX_IO_POWER_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 3)
-#define XLP9XX_IO_JTAG_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 4)
-
-#define XLP9XX_IO_PCIE_OFFSET(node, i) XLP9XX_HDR_OFFSET(node, 1, i)
-#define XLP9XX_IO_PCIE0_OFFSET(node) XLP9XX_HDR_OFFSET(node, 1, 0)
-#define XLP9XX_IO_PCIE2_OFFSET(node) XLP9XX_HDR_OFFSET(node, 1, 2)
-#define XLP9XX_IO_PCIE3_OFFSET(node) XLP9XX_HDR_OFFSET(node, 1, 3)
-
-/* XLP9xx USB block */
-#define XLP9XX_IO_USB_OFFSET(node, i) XLP9XX_HDR_OFFSET(node, 4, i)
-#define XLP9XX_IO_USB_XHCI0_OFFSET(node) XLP9XX_HDR_OFFSET(node, 4, 1)
-#define XLP9XX_IO_USB_XHCI1_OFFSET(node) XLP9XX_HDR_OFFSET(node, 4, 2)
-
-/* XLP9XX on-chip SATA controller */
-#define XLP9XX_IO_SATA_OFFSET(node) XLP9XX_HDR_OFFSET(node, 3, 2)
-
-/* Flash */
-#define XLP9XX_IO_NOR_OFFSET(node) XLP9XX_HDR_OFFSET(node, 7, 0)
-#define XLP9XX_IO_NAND_OFFSET(node) XLP9XX_HDR_OFFSET(node, 7, 1)
-#define XLP9XX_IO_SPI_OFFSET(node) XLP9XX_HDR_OFFSET(node, 7, 2)
-#define XLP9XX_IO_MMC_OFFSET(node) XLP9XX_HDR_OFFSET(node, 7, 3)
-
-/* PCI config header register id's */
-#define XLP_PCI_CFGREG0 0x00
-#define XLP_PCI_CFGREG1 0x01
-#define XLP_PCI_CFGREG2 0x02
-#define XLP_PCI_CFGREG3 0x03
-#define XLP_PCI_CFGREG4 0x04
-#define XLP_PCI_CFGREG5 0x05
-#define XLP_PCI_DEVINFO_REG0 0x30
-#define XLP_PCI_DEVINFO_REG1 0x31
-#define XLP_PCI_DEVINFO_REG2 0x32
-#define XLP_PCI_DEVINFO_REG3 0x33
-#define XLP_PCI_DEVINFO_REG4 0x34
-#define XLP_PCI_DEVINFO_REG5 0x35
-#define XLP_PCI_DEVINFO_REG6 0x36
-#define XLP_PCI_DEVINFO_REG7 0x37
-#define XLP_PCI_DEVSCRATCH_REG0 0x38
-#define XLP_PCI_DEVSCRATCH_REG1 0x39
-#define XLP_PCI_DEVSCRATCH_REG2 0x3a
-#define XLP_PCI_DEVSCRATCH_REG3 0x3b
-#define XLP_PCI_MSGSTN_REG 0x3c
-#define XLP_PCI_IRTINFO_REG 0x3d
-#define XLP_PCI_UCODEINFO_REG 0x3e
-#define XLP_PCI_SBB_WT_REG 0x3f
-
-/* PCI IDs for SoC device */
-#define PCI_VENDOR_NETLOGIC 0x184e
-
-#define PCI_DEVICE_ID_NLM_ROOT 0x1001
-#define PCI_DEVICE_ID_NLM_ICI 0x1002
-#define PCI_DEVICE_ID_NLM_PIC 0x1003
-#define PCI_DEVICE_ID_NLM_PCIE 0x1004
-#define PCI_DEVICE_ID_NLM_EHCI 0x1007
-#define PCI_DEVICE_ID_NLM_OHCI 0x1008
-#define PCI_DEVICE_ID_NLM_NAE 0x1009
-#define PCI_DEVICE_ID_NLM_POE 0x100A
-#define PCI_DEVICE_ID_NLM_FMN 0x100B
-#define PCI_DEVICE_ID_NLM_RAID 0x100D
-#define PCI_DEVICE_ID_NLM_SAE 0x100D
-#define PCI_DEVICE_ID_NLM_RSA 0x100E
-#define PCI_DEVICE_ID_NLM_CMP 0x100F
-#define PCI_DEVICE_ID_NLM_UART 0x1010
-#define PCI_DEVICE_ID_NLM_I2C 0x1011
-#define PCI_DEVICE_ID_NLM_NOR 0x1015
-#define PCI_DEVICE_ID_NLM_NAND 0x1016
-#define PCI_DEVICE_ID_NLM_MMC 0x1018
-#define PCI_DEVICE_ID_NLM_SATA 0x101A
-#define PCI_DEVICE_ID_NLM_XHCI 0x101D
-
-#define PCI_DEVICE_ID_XLP9XX_MMC 0x9018
-#define PCI_DEVICE_ID_XLP9XX_SATA 0x901A
-#define PCI_DEVICE_ID_XLP9XX_XHCI 0x901D
-
-#ifndef __ASSEMBLY__
-
-#define nlm_read_pci_reg(b, r) nlm_read_reg(b, r)
-#define nlm_write_pci_reg(b, r, v) nlm_write_reg(b, r, v)
-
-static inline int xlp9xx_get_socbus(int node)
-{
- uint64_t socbridge;
-
- if (node == 0)
- return 1;
- socbridge = nlm_pcicfg_base(XLP9XX_IO_BRIDGE_OFFSET(node));
- return (nlm_read_pci_reg(socbridge, 0x6) >> 8) & 0xff;
-}
-#endif /* !__ASSEMBLY */
-
-#endif /* __NLM_HAL_IOMAP_H__ */
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h b/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h
deleted file mode 100644
index 91540f41e1e4..000000000000
--- a/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Copyright (c) 2003-2012 Broadcom Corporation
- * All Rights Reserved
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the Broadcom
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef __NLM_HAL_PCIBUS_H__
-#define __NLM_HAL_PCIBUS_H__
-
-/* PCIE Memory and IO regions */
-#define PCIE_MEM_BASE 0xd0000000ULL
-#define PCIE_MEM_LIMIT 0xdfffffffULL
-#define PCIE_IO_BASE 0x14000000ULL
-#define PCIE_IO_LIMIT 0x15ffffffULL
-
-#define PCIE_BRIDGE_CMD 0x1
-#define PCIE_BRIDGE_MSI_CAP 0x14
-#define PCIE_BRIDGE_MSI_ADDRL 0x15
-#define PCIE_BRIDGE_MSI_ADDRH 0x16
-#define PCIE_BRIDGE_MSI_DATA 0x17
-
-/* XLP Global PCIE configuration space registers */
-#define PCIE_BYTE_SWAP_MEM_BASE 0x247
-#define PCIE_BYTE_SWAP_MEM_LIM 0x248
-#define PCIE_BYTE_SWAP_IO_BASE 0x249
-#define PCIE_BYTE_SWAP_IO_LIM 0x24A
-
-#define PCIE_BRIDGE_MSIX_ADDR_BASE 0x24F
-#define PCIE_BRIDGE_MSIX_ADDR_LIMIT 0x250
-#define PCIE_MSI_STATUS 0x25A
-#define PCIE_MSI_EN 0x25B
-#define PCIE_MSIX_STATUS 0x25D
-#define PCIE_INT_STATUS0 0x25F
-#define PCIE_INT_STATUS1 0x260
-#define PCIE_INT_EN0 0x261
-#define PCIE_INT_EN1 0x262
-
-/* XLP9XX has basic changes */
-#define PCIE_9XX_BYTE_SWAP_MEM_BASE 0x25c
-#define PCIE_9XX_BYTE_SWAP_MEM_LIM 0x25d
-#define PCIE_9XX_BYTE_SWAP_IO_BASE 0x25e
-#define PCIE_9XX_BYTE_SWAP_IO_LIM 0x25f
-
-#define PCIE_9XX_BRIDGE_MSIX_ADDR_BASE 0x264
-#define PCIE_9XX_BRIDGE_MSIX_ADDR_LIMIT 0x265
-#define PCIE_9XX_MSI_STATUS 0x283
-#define PCIE_9XX_MSI_EN 0x284
-/* 128 MSIX vectors available in 9xx */
-#define PCIE_9XX_MSIX_STATUS0 0x286
-#define PCIE_9XX_MSIX_STATUSX(n) (n + 0x286)
-#define PCIE_9XX_MSIX_VEC 0x296
-#define PCIE_9XX_MSIX_VECX(n) (n + 0x296)
-#define PCIE_9XX_INT_STATUS0 0x397
-#define PCIE_9XX_INT_STATUS1 0x398
-#define PCIE_9XX_INT_EN0 0x399
-#define PCIE_9XX_INT_EN1 0x39a
-
-/* other */
-#define PCIE_NLINKS 4
-
-/* MSI addresses */
-#define MSI_ADDR_BASE 0xfffee00000ULL
-#define MSI_ADDR_SZ 0x10000
-#define MSI_LINK_ADDR(n, l) (MSI_ADDR_BASE + \
- (PCIE_NLINKS * (n) + (l)) * MSI_ADDR_SZ)
-#define MSIX_ADDR_BASE 0xfffef00000ULL
-#define MSIX_LINK_ADDR(n, l) (MSIX_ADDR_BASE + \
- (PCIE_NLINKS * (n) + (l)) * MSI_ADDR_SZ)
-#ifndef __ASSEMBLY__
-
-#define nlm_read_pcie_reg(b, r) nlm_read_reg(b, r)
-#define nlm_write_pcie_reg(b, r, v) nlm_write_reg(b, r, v)
-#define nlm_get_pcie_base(node, inst) nlm_pcicfg_base(cpu_is_xlp9xx() ? \
- XLP9XX_IO_PCIE_OFFSET(node, inst) : XLP_IO_PCIE_OFFSET(node, inst))
-
-#ifdef CONFIG_PCI_MSI
-void xlp_init_node_msi_irqs(int node, int link);
-#else
-static inline void xlp_init_node_msi_irqs(int node, int link) {}
-#endif
-
-struct pci_dev *xlp_get_pcie_link(const struct pci_dev *dev);
-
-#endif
-#endif /* __NLM_HAL_PCIBUS_H__ */
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/pic.h b/arch/mips/include/asm/netlogic/xlp-hal/pic.h
deleted file mode 100644
index 41cefe94f0c9..000000000000
--- a/arch/mips/include/asm/netlogic/xlp-hal/pic.h
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _NLM_HAL_PIC_H
-#define _NLM_HAL_PIC_H
-
-/* PIC Specific registers */
-#define PIC_CTRL 0x00
-
-/* PIC control register defines */
-#define PIC_CTRL_ITV 32 /* interrupt timeout value */
-#define PIC_CTRL_ICI 19 /* ICI interrupt timeout enable */
-#define PIC_CTRL_ITE 18 /* interrupt timeout enable */
-#define PIC_CTRL_STE 10 /* system timer interrupt enable */
-#define PIC_CTRL_WWR1 8 /* watchdog 1 wraparound count for reset */
-#define PIC_CTRL_WWR0 6 /* watchdog 0 wraparound count for reset */
-#define PIC_CTRL_WWN1 4 /* watchdog 1 wraparound count for NMI */
-#define PIC_CTRL_WWN0 2 /* watchdog 0 wraparound count for NMI */
-#define PIC_CTRL_WTE 0 /* watchdog timer enable */
-
-/* PIC Status register defines */
-#define PIC_ICI_STATUS 33 /* ICI interrupt timeout status */
-#define PIC_ITE_STATUS 32 /* interrupt timeout status */
-#define PIC_STS_STATUS 4 /* System timer interrupt status */
-#define PIC_WNS_STATUS 2 /* NMI status for watchdog timers */
-#define PIC_WIS_STATUS 0 /* Interrupt status for watchdog timers */
-
-/* PIC IPI control register offsets */
-#define PIC_IPICTRL_NMI 32
-#define PIC_IPICTRL_RIV 20 /* received interrupt vector */
-#define PIC_IPICTRL_IDB 16 /* interrupt destination base */
-#define PIC_IPICTRL_DTE 0 /* interrupt destination thread enables */
-
-/* PIC IRT register offsets */
-#define PIC_IRT_ENABLE 31
-#define PIC_IRT_NMI 29
-#define PIC_IRT_SCH 28 /* Scheduling scheme */
-#define PIC_IRT_RVEC 20 /* Interrupt receive vectors */
-#define PIC_IRT_DT 19 /* Destination type */
-#define PIC_IRT_DB 16 /* Destination base */
-#define PIC_IRT_DTE 0 /* Destination thread enables */
-
-#define PIC_BYTESWAP 0x02
-#define PIC_STATUS 0x04
-#define PIC_INTR_TIMEOUT 0x06
-#define PIC_ICI0_INTR_TIMEOUT 0x08
-#define PIC_ICI1_INTR_TIMEOUT 0x0a
-#define PIC_ICI2_INTR_TIMEOUT 0x0c
-#define PIC_IPI_CTL 0x0e
-#define PIC_INT_ACK 0x10
-#define PIC_INT_PENDING0 0x12
-#define PIC_INT_PENDING1 0x14
-#define PIC_INT_PENDING2 0x16
-
-#define PIC_WDOG0_MAXVAL 0x18
-#define PIC_WDOG0_COUNT 0x1a
-#define PIC_WDOG0_ENABLE0 0x1c
-#define PIC_WDOG0_ENABLE1 0x1e
-#define PIC_WDOG0_BEATCMD 0x20
-#define PIC_WDOG0_BEAT0 0x22
-#define PIC_WDOG0_BEAT1 0x24
-
-#define PIC_WDOG1_MAXVAL 0x26
-#define PIC_WDOG1_COUNT 0x28
-#define PIC_WDOG1_ENABLE0 0x2a
-#define PIC_WDOG1_ENABLE1 0x2c
-#define PIC_WDOG1_BEATCMD 0x2e
-#define PIC_WDOG1_BEAT0 0x30
-#define PIC_WDOG1_BEAT1 0x32
-
-#define PIC_WDOG_MAXVAL(i) (PIC_WDOG0_MAXVAL + ((i) ? 7 : 0))
-#define PIC_WDOG_COUNT(i) (PIC_WDOG0_COUNT + ((i) ? 7 : 0))
-#define PIC_WDOG_ENABLE0(i) (PIC_WDOG0_ENABLE0 + ((i) ? 7 : 0))
-#define PIC_WDOG_ENABLE1(i) (PIC_WDOG0_ENABLE1 + ((i) ? 7 : 0))
-#define PIC_WDOG_BEATCMD(i) (PIC_WDOG0_BEATCMD + ((i) ? 7 : 0))
-#define PIC_WDOG_BEAT0(i) (PIC_WDOG0_BEAT0 + ((i) ? 7 : 0))
-#define PIC_WDOG_BEAT1(i) (PIC_WDOG0_BEAT1 + ((i) ? 7 : 0))
-
-#define PIC_TIMER0_MAXVAL 0x34
-#define PIC_TIMER1_MAXVAL 0x36
-#define PIC_TIMER2_MAXVAL 0x38
-#define PIC_TIMER3_MAXVAL 0x3a
-#define PIC_TIMER4_MAXVAL 0x3c
-#define PIC_TIMER5_MAXVAL 0x3e
-#define PIC_TIMER6_MAXVAL 0x40
-#define PIC_TIMER7_MAXVAL 0x42
-#define PIC_TIMER_MAXVAL(i) (PIC_TIMER0_MAXVAL + ((i) * 2))
-
-#define PIC_TIMER0_COUNT 0x44
-#define PIC_TIMER1_COUNT 0x46
-#define PIC_TIMER2_COUNT 0x48
-#define PIC_TIMER3_COUNT 0x4a
-#define PIC_TIMER4_COUNT 0x4c
-#define PIC_TIMER5_COUNT 0x4e
-#define PIC_TIMER6_COUNT 0x50
-#define PIC_TIMER7_COUNT 0x52
-#define PIC_TIMER_COUNT(i) (PIC_TIMER0_COUNT + ((i) * 2))
-
-#define PIC_ITE0_N0_N1 0x54
-#define PIC_ITE1_N0_N1 0x58
-#define PIC_ITE2_N0_N1 0x5c
-#define PIC_ITE3_N0_N1 0x60
-#define PIC_ITE4_N0_N1 0x64
-#define PIC_ITE5_N0_N1 0x68
-#define PIC_ITE6_N0_N1 0x6c
-#define PIC_ITE7_N0_N1 0x70
-#define PIC_ITE_N0_N1(i) (PIC_ITE0_N0_N1 + ((i) * 4))
-
-#define PIC_ITE0_N2_N3 0x56
-#define PIC_ITE1_N2_N3 0x5a
-#define PIC_ITE2_N2_N3 0x5e
-#define PIC_ITE3_N2_N3 0x62
-#define PIC_ITE4_N2_N3 0x66
-#define PIC_ITE5_N2_N3 0x6a
-#define PIC_ITE6_N2_N3 0x6e
-#define PIC_ITE7_N2_N3 0x72
-#define PIC_ITE_N2_N3(i) (PIC_ITE0_N2_N3 + ((i) * 4))
-
-#define PIC_IRT0 0x74
-#define PIC_IRT(i) (PIC_IRT0 + ((i) * 2))
-
-#define PIC_9XX_PENDING_0 0x6
-#define PIC_9XX_PENDING_1 0x8
-#define PIC_9XX_PENDING_2 0xa
-#define PIC_9XX_PENDING_3 0xc
-
-#define PIC_9XX_IRT0 0x1c0
-#define PIC_9XX_IRT(i) (PIC_9XX_IRT0 + ((i) * 2))
-
-/*
- * IRT Map
- */
-#define PIC_NUM_IRTS 160
-#define PIC_9XX_NUM_IRTS 256
-
-#define PIC_IRT_WD_0_INDEX 0
-#define PIC_IRT_WD_1_INDEX 1
-#define PIC_IRT_WD_NMI_0_INDEX 2
-#define PIC_IRT_WD_NMI_1_INDEX 3
-#define PIC_IRT_TIMER_0_INDEX 4
-#define PIC_IRT_TIMER_1_INDEX 5
-#define PIC_IRT_TIMER_2_INDEX 6
-#define PIC_IRT_TIMER_3_INDEX 7
-#define PIC_IRT_TIMER_4_INDEX 8
-#define PIC_IRT_TIMER_5_INDEX 9
-#define PIC_IRT_TIMER_6_INDEX 10
-#define PIC_IRT_TIMER_7_INDEX 11
-#define PIC_IRT_CLOCK_INDEX PIC_IRT_TIMER_7_INDEX
-#define PIC_IRT_TIMER_INDEX(num) ((num) + PIC_IRT_TIMER_0_INDEX)
-
-
-/* 11 and 12 */
-#define PIC_NUM_MSG_Q_IRTS 32
-#define PIC_IRT_MSG_Q0_INDEX 12
-#define PIC_IRT_MSG_Q_INDEX(qid) ((qid) + PIC_IRT_MSG_Q0_INDEX)
-/* 12 to 43 */
-#define PIC_IRT_MSG_0_INDEX 44
-#define PIC_IRT_MSG_1_INDEX 45
-/* 44 and 45 */
-#define PIC_NUM_PCIE_MSIX_IRTS 32
-#define PIC_IRT_PCIE_MSIX_0_INDEX 46
-#define PIC_IRT_PCIE_MSIX_INDEX(num) ((num) + PIC_IRT_PCIE_MSIX_0_INDEX)
-/* 46 to 77 */
-#define PIC_NUM_PCIE_LINK_IRTS 4
-#define PIC_IRT_PCIE_LINK_0_INDEX 78
-#define PIC_IRT_PCIE_LINK_1_INDEX 79
-#define PIC_IRT_PCIE_LINK_2_INDEX 80
-#define PIC_IRT_PCIE_LINK_3_INDEX 81
-#define PIC_IRT_PCIE_LINK_INDEX(num) ((num) + PIC_IRT_PCIE_LINK_0_INDEX)
-
-#define PIC_9XX_IRT_PCIE_LINK_0_INDEX 191
-#define PIC_9XX_IRT_PCIE_LINK_INDEX(num) \
- ((num) + PIC_9XX_IRT_PCIE_LINK_0_INDEX)
-
-#define PIC_CLOCK_TIMER 7
-
-#if !defined(LOCORE) && !defined(__ASSEMBLY__)
-
-/*
- * Misc
- */
-#define PIC_IRT_VALID 1
-#define PIC_LOCAL_SCHEDULING 1
-#define PIC_GLOBAL_SCHEDULING 0
-
-#define nlm_read_pic_reg(b, r) nlm_read_reg64(b, r)
-#define nlm_write_pic_reg(b, r, v) nlm_write_reg64(b, r, v)
-#define nlm_get_pic_pcibase(node) nlm_pcicfg_base(cpu_is_xlp9xx() ? \
- XLP9XX_IO_PIC_OFFSET(node) : XLP_IO_PIC_OFFSET(node))
-#define nlm_get_pic_regbase(node) (nlm_get_pic_pcibase(node) + XLP_IO_PCI_HDRSZ)
-
-/* We use PIC on node 0 as a timer */
-#define pic_timer_freq() nlm_get_pic_frequency(0)
-
-/* IRT and h/w interrupt routines */
-static inline void
-nlm_9xx_pic_write_irt(uint64_t base, int irt_num, int en, int nmi,
- int sch, int vec, int dt, int db, int cpu)
-{
- uint64_t val;
-
- val = (((uint64_t)en & 0x1) << 22) | ((nmi & 0x1) << 23) |
- ((0 /*mc*/) << 20) | ((vec & 0x3f) << 24) |
- ((dt & 0x1) << 21) | (0 /*ptr*/ << 16) |
- (cpu & 0x3ff);
-
- nlm_write_pic_reg(base, PIC_9XX_IRT(irt_num), val);
-}
-
-static inline void
-nlm_pic_write_irt(uint64_t base, int irt_num, int en, int nmi,
- int sch, int vec, int dt, int db, int dte)
-{
- uint64_t val;
-
- val = (((uint64_t)en & 0x1) << 31) | ((nmi & 0x1) << 29) |
- ((sch & 0x1) << 28) | ((vec & 0x3f) << 20) |
- ((dt & 0x1) << 19) | ((db & 0x7) << 16) |
- (dte & 0xffff);
-
- nlm_write_pic_reg(base, PIC_IRT(irt_num), val);
-}
-
-static inline void
-nlm_pic_write_irt_direct(uint64_t base, int irt_num, int en, int nmi,
- int sch, int vec, int cpu)
-{
- if (cpu_is_xlp9xx())
- nlm_9xx_pic_write_irt(base, irt_num, en, nmi, sch, vec,
- 1, 0, cpu);
- else
- nlm_pic_write_irt(base, irt_num, en, nmi, sch, vec, 1,
- (cpu >> 4), /* thread group */
- 1 << (cpu & 0xf)); /* thread mask */
-}
-
-static inline uint64_t
-nlm_pic_read_timer(uint64_t base, int timer)
-{
- return nlm_read_pic_reg(base, PIC_TIMER_COUNT(timer));
-}
-
-static inline uint32_t
-nlm_pic_read_timer32(uint64_t base, int timer)
-{
- return (uint32_t)nlm_read_pic_reg(base, PIC_TIMER_COUNT(timer));
-}
-
-static inline void
-nlm_pic_write_timer(uint64_t base, int timer, uint64_t value)
-{
- nlm_write_pic_reg(base, PIC_TIMER_COUNT(timer), value);
-}
-
-static inline void
-nlm_pic_set_timer(uint64_t base, int timer, uint64_t value, int irq, int cpu)
-{
- uint64_t pic_ctrl = nlm_read_pic_reg(base, PIC_CTRL);
- int en;
-
- en = (irq > 0);
- nlm_write_pic_reg(base, PIC_TIMER_MAXVAL(timer), value);
- nlm_pic_write_irt_direct(base, PIC_IRT_TIMER_INDEX(timer),
- en, 0, 0, irq, cpu);
-
- /* enable the timer */
- pic_ctrl |= (1 << (PIC_CTRL_STE + timer));
- nlm_write_pic_reg(base, PIC_CTRL, pic_ctrl);
-}
-
-static inline void
-nlm_pic_enable_irt(uint64_t base, int irt)
-{
- uint64_t reg;
-
- if (cpu_is_xlp9xx()) {
- reg = nlm_read_pic_reg(base, PIC_9XX_IRT(irt));
- nlm_write_pic_reg(base, PIC_9XX_IRT(irt), reg | (1 << 22));
- } else {
- reg = nlm_read_pic_reg(base, PIC_IRT(irt));
- nlm_write_pic_reg(base, PIC_IRT(irt), reg | (1u << 31));
- }
-}
-
-static inline void
-nlm_pic_disable_irt(uint64_t base, int irt)
-{
- uint64_t reg;
-
- if (cpu_is_xlp9xx()) {
- reg = nlm_read_pic_reg(base, PIC_9XX_IRT(irt));
- reg &= ~((uint64_t)1 << 22);
- nlm_write_pic_reg(base, PIC_9XX_IRT(irt), reg);
- } else {
- reg = nlm_read_pic_reg(base, PIC_IRT(irt));
- reg &= ~((uint64_t)1 << 31);
- nlm_write_pic_reg(base, PIC_IRT(irt), reg);
- }
-}
-
-static inline void
-nlm_pic_send_ipi(uint64_t base, int hwt, int irq, int nmi)
-{
- uint64_t ipi;
-
- if (cpu_is_xlp9xx())
- ipi = (nmi << 23) | (irq << 24) |
- (0/*mcm*/ << 20) | (0/*ptr*/ << 16) | hwt;
- else
- ipi = ((uint64_t)nmi << 31) | (irq << 20) |
- ((hwt >> 4) << 16) | (1 << (hwt & 0xf));
-
- nlm_write_pic_reg(base, PIC_IPI_CTL, ipi);
-}
-
-static inline void
-nlm_pic_ack(uint64_t base, int irt_num)
-{
- nlm_write_pic_reg(base, PIC_INT_ACK, irt_num);
-
- /* Ack the Status register for Watchdog & System timers */
- if (irt_num < 12)
- nlm_write_pic_reg(base, PIC_STATUS, (1 << irt_num));
-}
-
-static inline void
-nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt, int en)
-{
- nlm_pic_write_irt_direct(base, irt, en, 0, 0, irq, hwt);
-}
-
-int nlm_irq_to_irt(int irq);
-
-#endif /* __ASSEMBLY__ */
-#endif /* _NLM_HAL_PIC_H */
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/sys.h b/arch/mips/include/asm/netlogic/xlp-hal/sys.h
deleted file mode 100644
index 6bcf3952e556..000000000000
--- a/arch/mips/include/asm/netlogic/xlp-hal/sys.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef __NLM_HAL_SYS_H__
-#define __NLM_HAL_SYS_H__
-
-/**
-* @file_name sys.h
-* @author Netlogic Microsystems
-* @brief HAL for System configuration registers
-*/
-#define SYS_CHIP_RESET 0x00
-#define SYS_POWER_ON_RESET_CFG 0x01
-#define SYS_EFUSE_DEVICE_CFG_STATUS0 0x02
-#define SYS_EFUSE_DEVICE_CFG_STATUS1 0x03
-#define SYS_EFUSE_DEVICE_CFG_STATUS2 0x04
-#define SYS_EFUSE_DEVICE_CFG3 0x05
-#define SYS_EFUSE_DEVICE_CFG4 0x06
-#define SYS_EFUSE_DEVICE_CFG5 0x07
-#define SYS_EFUSE_DEVICE_CFG6 0x08
-#define SYS_EFUSE_DEVICE_CFG7 0x09
-#define SYS_PLL_CTRL 0x0a
-#define SYS_CPU_RESET 0x0b
-#define SYS_CPU_NONCOHERENT_MODE 0x0d
-#define SYS_CORE_DFS_DIS_CTRL 0x0e
-#define SYS_CORE_DFS_RST_CTRL 0x0f
-#define SYS_CORE_DFS_BYP_CTRL 0x10
-#define SYS_CORE_DFS_PHA_CTRL 0x11
-#define SYS_CORE_DFS_DIV_INC_CTRL 0x12
-#define SYS_CORE_DFS_DIV_DEC_CTRL 0x13
-#define SYS_CORE_DFS_DIV_VALUE 0x14
-#define SYS_RESET 0x15
-#define SYS_DFS_DIS_CTRL 0x16
-#define SYS_DFS_RST_CTRL 0x17
-#define SYS_DFS_BYP_CTRL 0x18
-#define SYS_DFS_DIV_INC_CTRL 0x19
-#define SYS_DFS_DIV_DEC_CTRL 0x1a
-#define SYS_DFS_DIV_VALUE0 0x1b
-#define SYS_DFS_DIV_VALUE1 0x1c
-#define SYS_SENSE_AMP_DLY 0x1d
-#define SYS_SOC_SENSE_AMP_DLY 0x1e
-#define SYS_CTRL0 0x1f
-#define SYS_CTRL1 0x20
-#define SYS_TIMEOUT_BS1 0x21
-#define SYS_BYTE_SWAP 0x22
-#define SYS_VRM_VID 0x23
-#define SYS_PWR_RAM_CMD 0x24
-#define SYS_PWR_RAM_ADDR 0x25
-#define SYS_PWR_RAM_DATA0 0x26
-#define SYS_PWR_RAM_DATA1 0x27
-#define SYS_PWR_RAM_DATA2 0x28
-#define SYS_PWR_UCODE 0x29
-#define SYS_CPU0_PWR_STATUS 0x2a
-#define SYS_CPU1_PWR_STATUS 0x2b
-#define SYS_CPU2_PWR_STATUS 0x2c
-#define SYS_CPU3_PWR_STATUS 0x2d
-#define SYS_CPU4_PWR_STATUS 0x2e
-#define SYS_CPU5_PWR_STATUS 0x2f
-#define SYS_CPU6_PWR_STATUS 0x30
-#define SYS_CPU7_PWR_STATUS 0x31
-#define SYS_STATUS 0x32
-#define SYS_INT_POL 0x33
-#define SYS_INT_TYPE 0x34
-#define SYS_INT_STATUS 0x35
-#define SYS_INT_MASK0 0x36
-#define SYS_INT_MASK1 0x37
-#define SYS_UCO_S_ECC 0x38
-#define SYS_UCO_M_ECC 0x39
-#define SYS_UCO_ADDR 0x3a
-#define SYS_UCO_INSTR 0x3b
-#define SYS_MEM_BIST0 0x3c
-#define SYS_MEM_BIST1 0x3d
-#define SYS_MEM_BIST2 0x3e
-#define SYS_MEM_BIST3 0x3f
-#define SYS_MEM_BIST4 0x40
-#define SYS_MEM_BIST5 0x41
-#define SYS_MEM_BIST6 0x42
-#define SYS_MEM_BIST7 0x43
-#define SYS_MEM_BIST8 0x44
-#define SYS_MEM_BIST9 0x45
-#define SYS_MEM_BIST10 0x46
-#define SYS_MEM_BIST11 0x47
-#define SYS_MEM_BIST12 0x48
-#define SYS_SCRTCH0 0x49
-#define SYS_SCRTCH1 0x4a
-#define SYS_SCRTCH2 0x4b
-#define SYS_SCRTCH3 0x4c
-
-/* PLL registers XLP2XX */
-#define SYS_CPU_PLL_CTRL0(core) (0x1c0 + (core * 4))
-#define SYS_CPU_PLL_CTRL1(core) (0x1c1 + (core * 4))
-#define SYS_CPU_PLL_CTRL2(core) (0x1c2 + (core * 4))
-#define SYS_CPU_PLL_CTRL3(core) (0x1c3 + (core * 4))
-#define SYS_PLL_CTRL0 0x240
-#define SYS_PLL_CTRL1 0x241
-#define SYS_PLL_CTRL2 0x242
-#define SYS_PLL_CTRL3 0x243
-#define SYS_DMC_PLL_CTRL0 0x244
-#define SYS_DMC_PLL_CTRL1 0x245
-#define SYS_DMC_PLL_CTRL2 0x246
-#define SYS_DMC_PLL_CTRL3 0x247
-
-#define SYS_PLL_CTRL0_DEVX(x) (0x248 + (x) * 4)
-#define SYS_PLL_CTRL1_DEVX(x) (0x249 + (x) * 4)
-#define SYS_PLL_CTRL2_DEVX(x) (0x24a + (x) * 4)
-#define SYS_PLL_CTRL3_DEVX(x) (0x24b + (x) * 4)
-
-#define SYS_CPU_PLL_CHG_CTRL 0x288
-#define SYS_PLL_CHG_CTRL 0x289
-#define SYS_CLK_DEV_DIS 0x28a
-#define SYS_CLK_DEV_SEL 0x28b
-#define SYS_CLK_DEV_DIV 0x28c
-#define SYS_CLK_DEV_CHG 0x28d
-#define SYS_CLK_DEV_SEL_REG 0x28e
-#define SYS_CLK_DEV_DIV_REG 0x28f
-#define SYS_CPU_PLL_LOCK 0x29f
-#define SYS_SYS_PLL_LOCK 0x2a0
-#define SYS_PLL_MEM_CMD 0x2a1
-#define SYS_CPU_PLL_MEM_REQ 0x2a2
-#define SYS_SYS_PLL_MEM_REQ 0x2a3
-#define SYS_PLL_MEM_STAT 0x2a4
-
-/* PLL registers XLP9XX */
-#define SYS_9XX_CPU_PLL_CTRL0(core) (0xc0 + (core * 4))
-#define SYS_9XX_CPU_PLL_CTRL1(core) (0xc1 + (core * 4))
-#define SYS_9XX_CPU_PLL_CTRL2(core) (0xc2 + (core * 4))
-#define SYS_9XX_CPU_PLL_CTRL3(core) (0xc3 + (core * 4))
-#define SYS_9XX_DMC_PLL_CTRL0 0x140
-#define SYS_9XX_DMC_PLL_CTRL1 0x141
-#define SYS_9XX_DMC_PLL_CTRL2 0x142
-#define SYS_9XX_DMC_PLL_CTRL3 0x143
-#define SYS_9XX_PLL_CTRL0 0x144
-#define SYS_9XX_PLL_CTRL1 0x145
-#define SYS_9XX_PLL_CTRL2 0x146
-#define SYS_9XX_PLL_CTRL3 0x147
-
-#define SYS_9XX_PLL_CTRL0_DEVX(x) (0x148 + (x) * 4)
-#define SYS_9XX_PLL_CTRL1_DEVX(x) (0x149 + (x) * 4)
-#define SYS_9XX_PLL_CTRL2_DEVX(x) (0x14a + (x) * 4)
-#define SYS_9XX_PLL_CTRL3_DEVX(x) (0x14b + (x) * 4)
-
-#define SYS_9XX_CPU_PLL_CHG_CTRL 0x188
-#define SYS_9XX_PLL_CHG_CTRL 0x189
-#define SYS_9XX_CLK_DEV_DIS 0x18a
-#define SYS_9XX_CLK_DEV_SEL 0x18b
-#define SYS_9XX_CLK_DEV_DIV 0x18d
-#define SYS_9XX_CLK_DEV_CHG 0x18f
-
-#define SYS_9XX_CLK_DEV_SEL_REG 0x1a4
-#define SYS_9XX_CLK_DEV_DIV_REG 0x1a6
-
-/* Registers changed on 9XX */
-#define SYS_9XX_POWER_ON_RESET_CFG 0x00
-#define SYS_9XX_CHIP_RESET 0x01
-#define SYS_9XX_CPU_RESET 0x02
-#define SYS_9XX_CPU_NONCOHERENT_MODE 0x03
-
-/* XLP 9XX fuse block registers */
-#define FUSE_9XX_DEVCFG6 0xc6
-
-#ifndef __ASSEMBLY__
-
-#define nlm_read_sys_reg(b, r) nlm_read_reg(b, r)
-#define nlm_write_sys_reg(b, r, v) nlm_write_reg(b, r, v)
-#define nlm_get_sys_pcibase(node) nlm_pcicfg_base(cpu_is_xlp9xx() ? \
- XLP9XX_IO_SYS_OFFSET(node) : XLP_IO_SYS_OFFSET(node))
-#define nlm_get_sys_regbase(node) (nlm_get_sys_pcibase(node) + XLP_IO_PCI_HDRSZ)
-
-/* XLP9XX fuse block */
-#define nlm_get_fuse_pcibase(node) \
- nlm_pcicfg_base(XLP9XX_IO_FUSE_OFFSET(node))
-#define nlm_get_fuse_regbase(node) \
- (nlm_get_fuse_pcibase(node) + XLP_IO_PCI_HDRSZ)
-
-#define nlm_get_clock_pcibase(node) \
- nlm_pcicfg_base(XLP9XX_IO_CLOCK_OFFSET(node))
-#define nlm_get_clock_regbase(node) \
- (nlm_get_clock_pcibase(node) + XLP_IO_PCI_HDRSZ)
-
-unsigned int nlm_get_pic_frequency(int node);
-#endif
-#endif
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/uart.h b/arch/mips/include/asm/netlogic/xlp-hal/uart.h
deleted file mode 100644
index a6c54424dd95..000000000000
--- a/arch/mips/include/asm/netlogic/xlp-hal/uart.h
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef __XLP_HAL_UART_H__
-#define __XLP_HAL_UART_H__
-
-/* UART Specific registers */
-#define UART_RX_DATA 0x00
-#define UART_TX_DATA 0x00
-
-#define UART_INT_EN 0x01
-#define UART_INT_ID 0x02
-#define UART_FIFO_CTL 0x02
-#define UART_LINE_CTL 0x03
-#define UART_MODEM_CTL 0x04
-#define UART_LINE_STS 0x05
-#define UART_MODEM_STS 0x06
-
-#define UART_DIVISOR0 0x00
-#define UART_DIVISOR1 0x01
-
-#define BASE_BAUD (XLP_IO_CLK/16)
-#define BAUD_DIVISOR(baud) (BASE_BAUD / baud)
-
-/* LCR mask values */
-#define LCR_5BITS 0x00
-#define LCR_6BITS 0x01
-#define LCR_7BITS 0x02
-#define LCR_8BITS 0x03
-#define LCR_STOPB 0x04
-#define LCR_PENAB 0x08
-#define LCR_PODD 0x00
-#define LCR_PEVEN 0x10
-#define LCR_PONE 0x20
-#define LCR_PZERO 0x30
-#define LCR_SBREAK 0x40
-#define LCR_EFR_ENABLE 0xbf
-#define LCR_DLAB 0x80
-
-/* MCR mask values */
-#define MCR_DTR 0x01
-#define MCR_RTS 0x02
-#define MCR_DRS 0x04
-#define MCR_IE 0x08
-#define MCR_LOOPBACK 0x10
-
-/* FCR mask values */
-#define FCR_RCV_RST 0x02
-#define FCR_XMT_RST 0x04
-#define FCR_RX_LOW 0x00
-#define FCR_RX_MEDL 0x40
-#define FCR_RX_MEDH 0x80
-#define FCR_RX_HIGH 0xc0
-
-/* IER mask values */
-#define IER_ERXRDY 0x1
-#define IER_ETXRDY 0x2
-#define IER_ERLS 0x4
-#define IER_EMSC 0x8
-
-#if !defined(LOCORE) && !defined(__ASSEMBLY__)
-
-#define nlm_read_uart_reg(b, r) nlm_read_reg(b, r)
-#define nlm_write_uart_reg(b, r, v) nlm_write_reg(b, r, v)
-#define nlm_get_uart_pcibase(node, inst) \
- nlm_pcicfg_base(cpu_is_xlp9xx() ? XLP9XX_IO_UART_OFFSET(node) : \
- XLP_IO_UART_OFFSET(node, inst))
-#define nlm_get_uart_regbase(node, inst) \
- (nlm_get_uart_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
-
-static inline void
-nlm_uart_set_baudrate(uint64_t base, int baud)
-{
- uint32_t lcr;
-
- lcr = nlm_read_uart_reg(base, UART_LINE_CTL);
-
- /* enable divisor register, and write baud values */
- nlm_write_uart_reg(base, UART_LINE_CTL, lcr | (1 << 7));
- nlm_write_uart_reg(base, UART_DIVISOR0,
- (BAUD_DIVISOR(baud) & 0xff));
- nlm_write_uart_reg(base, UART_DIVISOR1,
- ((BAUD_DIVISOR(baud) >> 8) & 0xff));
-
- /* restore default lcr */
- nlm_write_uart_reg(base, UART_LINE_CTL, lcr);
-}
-
-static inline void
-nlm_uart_outbyte(uint64_t base, char c)
-{
- uint32_t lsr;
-
- for (;;) {
- lsr = nlm_read_uart_reg(base, UART_LINE_STS);
- if (lsr & 0x20)
- break;
- }
-
- nlm_write_uart_reg(base, UART_TX_DATA, (int)c);
-}
-
-static inline char
-nlm_uart_inbyte(uint64_t base)
-{
- int data, lsr;
-
- for (;;) {
- lsr = nlm_read_uart_reg(base, UART_LINE_STS);
- if (lsr & 0x80) { /* parity/frame/break-error - push a zero */
- data = 0;
- break;
- }
- if (lsr & 0x01) { /* Rx data */
- data = nlm_read_uart_reg(base, UART_RX_DATA);
- break;
- }
- }
-
- return (char)data;
-}
-
-static inline int
-nlm_uart_init(uint64_t base, int baud, int databits, int stopbits,
- int parity, int int_en, int loopback)
-{
- uint32_t lcr;
-
- lcr = 0;
- if (databits >= 8)
- lcr |= LCR_8BITS;
- else if (databits == 7)
- lcr |= LCR_7BITS;
- else if (databits == 6)
- lcr |= LCR_6BITS;
- else
- lcr |= LCR_5BITS;
-
- if (stopbits > 1)
- lcr |= LCR_STOPB;
-
- lcr |= parity << 3;
-
- /* setup default lcr */
- nlm_write_uart_reg(base, UART_LINE_CTL, lcr);
-
- /* Reset the FIFOs */
- nlm_write_uart_reg(base, UART_LINE_CTL, FCR_RCV_RST | FCR_XMT_RST);
-
- nlm_uart_set_baudrate(base, baud);
-
- if (loopback)
- nlm_write_uart_reg(base, UART_MODEM_CTL, 0x1f);
-
- if (int_en)
- nlm_write_uart_reg(base, UART_INT_EN, IER_ERXRDY | IER_ETXRDY);
-
- return 0;
-}
-#endif /* !LOCORE && !__ASSEMBLY__ */
-#endif /* __XLP_HAL_UART_H__ */
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/xlp.h b/arch/mips/include/asm/netlogic/xlp-hal/xlp.h
deleted file mode 100644
index feb6ed807ec6..000000000000
--- a/arch/mips/include/asm/netlogic/xlp-hal/xlp.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _NLM_HAL_XLP_H
-#define _NLM_HAL_XLP_H
-
-#define PIC_UART_0_IRQ 17
-#define PIC_UART_1_IRQ 18
-
-#define PIC_PCIE_LINK_LEGACY_IRQ_BASE 19
-#define PIC_PCIE_LINK_LEGACY_IRQ(i) (19 + (i))
-
-#define PIC_EHCI_0_IRQ 23
-#define PIC_EHCI_1_IRQ 24
-#define PIC_OHCI_0_IRQ 25
-#define PIC_OHCI_1_IRQ 26
-#define PIC_OHCI_2_IRQ 27
-#define PIC_OHCI_3_IRQ 28
-#define PIC_2XX_XHCI_0_IRQ 23
-#define PIC_2XX_XHCI_1_IRQ 24
-#define PIC_2XX_XHCI_2_IRQ 25
-#define PIC_9XX_XHCI_0_IRQ 23
-#define PIC_9XX_XHCI_1_IRQ 24
-#define PIC_9XX_XHCI_2_IRQ 25
-
-#define PIC_MMC_IRQ 29
-#define PIC_I2C_0_IRQ 30
-#define PIC_I2C_1_IRQ 31
-#define PIC_I2C_2_IRQ 32
-#define PIC_I2C_3_IRQ 33
-#define PIC_SPI_IRQ 34
-#define PIC_NAND_IRQ 37
-#define PIC_SATA_IRQ 38
-#define PIC_GPIO_IRQ 39
-
-#define PIC_PCIE_LINK_MSI_IRQ_BASE 44 /* 44 - 47 MSI IRQ */
-#define PIC_PCIE_LINK_MSI_IRQ(i) (44 + (i))
-
-/* MSI-X with second link-level dispatch */
-#define PIC_PCIE_MSIX_IRQ_BASE 48 /* 48 - 51 MSI-X IRQ */
-#define PIC_PCIE_MSIX_IRQ(i) (48 + (i))
-
-/* XLP9xx and XLP8xx has 128 and 32 MSIX vectors respectively */
-#define NLM_MSIX_VEC_BASE 96 /* 96 - 223 - MSIX mapped */
-#define NLM_MSI_VEC_BASE 224 /* 224 -351 - MSI mapped */
-
-#define NLM_PIC_INDIRECT_VEC_BASE 512
-#define NLM_GPIO_VEC_BASE 768
-
-#define PIC_IRQ_BASE 8
-#define PIC_IRT_FIRST_IRQ PIC_IRQ_BASE
-#define PIC_IRT_LAST_IRQ 63
-
-#ifndef __ASSEMBLY__
-
-/* SMP support functions */
-void xlp_boot_core0_siblings(void);
-void xlp_wakeup_secondary_cpus(void);
-
-void xlp_mmu_init(void);
-void nlm_hal_init(void);
-int nlm_get_dram_map(int node, uint64_t *dram_map, int nentries);
-
-struct pci_dev;
-int xlp_socdev_to_node(const struct pci_dev *dev);
-
-/* Device tree related */
-void xlp_early_init_devtree(void);
-void *xlp_dt_init(void *fdtp);
-
-static inline int cpu_is_xlpii(void)
-{
- int chip = read_c0_prid() & PRID_IMP_MASK;
-
- return chip == PRID_IMP_NETLOGIC_XLP2XX ||
- chip == PRID_IMP_NETLOGIC_XLP9XX ||
- chip == PRID_IMP_NETLOGIC_XLP5XX;
-}
-
-static inline int cpu_is_xlp9xx(void)
-{
- int chip = read_c0_prid() & PRID_IMP_MASK;
-
- return chip == PRID_IMP_NETLOGIC_XLP9XX ||
- chip == PRID_IMP_NETLOGIC_XLP5XX;
-}
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_NLM_XLP_H */
diff --git a/arch/mips/include/asm/netlogic/xlr/bridge.h b/arch/mips/include/asm/netlogic/xlr/bridge.h
deleted file mode 100644
index 2d02428c4f1b..000000000000
--- a/arch/mips/include/asm/netlogic/xlr/bridge.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Copyright (c) 2003-2012 Broadcom Corporation
- * All Rights Reserved
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the Broadcom
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#ifndef _ASM_NLM_BRIDGE_H_
-#define _ASM_NLM_BRIDGE_H_
-
-#define BRIDGE_DRAM_0_BAR 0
-#define BRIDGE_DRAM_1_BAR 1
-#define BRIDGE_DRAM_2_BAR 2
-#define BRIDGE_DRAM_3_BAR 3
-#define BRIDGE_DRAM_4_BAR 4
-#define BRIDGE_DRAM_5_BAR 5
-#define BRIDGE_DRAM_6_BAR 6
-#define BRIDGE_DRAM_7_BAR 7
-#define BRIDGE_DRAM_CHN_0_MTR_0_BAR 8
-#define BRIDGE_DRAM_CHN_0_MTR_1_BAR 9
-#define BRIDGE_DRAM_CHN_0_MTR_2_BAR 10
-#define BRIDGE_DRAM_CHN_0_MTR_3_BAR 11
-#define BRIDGE_DRAM_CHN_0_MTR_4_BAR 12
-#define BRIDGE_DRAM_CHN_0_MTR_5_BAR 13
-#define BRIDGE_DRAM_CHN_0_MTR_6_BAR 14
-#define BRIDGE_DRAM_CHN_0_MTR_7_BAR 15
-#define BRIDGE_DRAM_CHN_1_MTR_0_BAR 16
-#define BRIDGE_DRAM_CHN_1_MTR_1_BAR 17
-#define BRIDGE_DRAM_CHN_1_MTR_2_BAR 18
-#define BRIDGE_DRAM_CHN_1_MTR_3_BAR 19
-#define BRIDGE_DRAM_CHN_1_MTR_4_BAR 20
-#define BRIDGE_DRAM_CHN_1_MTR_5_BAR 21
-#define BRIDGE_DRAM_CHN_1_MTR_6_BAR 22
-#define BRIDGE_DRAM_CHN_1_MTR_7_BAR 23
-#define BRIDGE_CFG_BAR 24
-#define BRIDGE_PHNX_IO_BAR 25
-#define BRIDGE_FLASH_BAR 26
-#define BRIDGE_SRAM_BAR 27
-#define BRIDGE_HTMEM_BAR 28
-#define BRIDGE_HTINT_BAR 29
-#define BRIDGE_HTPIC_BAR 30
-#define BRIDGE_HTSM_BAR 31
-#define BRIDGE_HTIO_BAR 32
-#define BRIDGE_HTCFG_BAR 33
-#define BRIDGE_PCIXCFG_BAR 34
-#define BRIDGE_PCIXMEM_BAR 35
-#define BRIDGE_PCIXIO_BAR 36
-#define BRIDGE_DEVICE_MASK 37
-#define BRIDGE_AERR_INTR_LOG1 38
-#define BRIDGE_AERR_INTR_LOG2 39
-#define BRIDGE_AERR_INTR_LOG3 40
-#define BRIDGE_AERR_DEV_STAT 41
-#define BRIDGE_AERR1_LOG1 42
-#define BRIDGE_AERR1_LOG2 43
-#define BRIDGE_AERR1_LOG3 44
-#define BRIDGE_AERR1_DEV_STAT 45
-#define BRIDGE_AERR_INTR_EN 46
-#define BRIDGE_AERR_UPG 47
-#define BRIDGE_AERR_CLEAR 48
-#define BRIDGE_AERR1_CLEAR 49
-#define BRIDGE_SBE_COUNTS 50
-#define BRIDGE_DBE_COUNTS 51
-#define BRIDGE_BITERR_INT_EN 52
-
-#define BRIDGE_SYS2IO_CREDITS 53
-#define BRIDGE_EVNT_CNT_CTRL1 54
-#define BRIDGE_EVNT_COUNTER1 55
-#define BRIDGE_EVNT_CNT_CTRL2 56
-#define BRIDGE_EVNT_COUNTER2 57
-#define BRIDGE_RESERVED1 58
-
-#define BRIDGE_DEFEATURE 59
-#define BRIDGE_SCRATCH0 60
-#define BRIDGE_SCRATCH1 61
-#define BRIDGE_SCRATCH2 62
-#define BRIDGE_SCRATCH3 63
-
-#endif
diff --git a/arch/mips/include/asm/netlogic/xlr/flash.h b/arch/mips/include/asm/netlogic/xlr/flash.h
deleted file mode 100644
index f8aca5472b6c..000000000000
--- a/arch/mips/include/asm/netlogic/xlr/flash.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (c) 2003-2012 Broadcom Corporation
- * All Rights Reserved
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the Broadcom
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#ifndef _ASM_NLM_FLASH_H_
-#define _ASM_NLM_FLASH_H_
-
-#define FLASH_CSBASE_ADDR(cs) (cs)
-#define FLASH_CSADDR_MASK(cs) (0x10 + (cs))
-#define FLASH_CSDEV_PARM(cs) (0x20 + (cs))
-#define FLASH_CSTIME_PARMA(cs) (0x30 + (cs))
-#define FLASH_CSTIME_PARMB(cs) (0x40 + (cs))
-
-#define FLASH_INT_MASK 0x50
-#define FLASH_INT_STATUS 0x60
-#define FLASH_ERROR_STATUS 0x70
-#define FLASH_ERROR_ADDR 0x80
-
-#define FLASH_NAND_CLE(cs) (0x90 + (cs))
-#define FLASH_NAND_ALE(cs) (0xa0 + (cs))
-
-#define FLASH_NAND_CSDEV_PARAM 0x000041e6
-#define FLASH_NAND_CSTIME_PARAMA 0x4f400e22
-#define FLASH_NAND_CSTIME_PARAMB 0x000083cf
-
-#endif
diff --git a/arch/mips/include/asm/netlogic/xlr/fmn.h b/arch/mips/include/asm/netlogic/xlr/fmn.h
deleted file mode 100644
index d79c68fa78d9..000000000000
--- a/arch/mips/include/asm/netlogic/xlr/fmn.h
+++ /dev/null
@@ -1,365 +0,0 @@
-/*
- * Copyright (c) 2003-2012 Broadcom Corporation
- * All Rights Reserved
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the Broadcom
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _NLM_FMN_H_
-#define _NLM_FMN_H_
-
-#include <asm/netlogic/mips-extns.h> /* for COP2 access */
-
-/* Station IDs */
-#define FMN_STNID_CPU0 0x00
-#define FMN_STNID_CPU1 0x08
-#define FMN_STNID_CPU2 0x10
-#define FMN_STNID_CPU3 0x18
-#define FMN_STNID_CPU4 0x20
-#define FMN_STNID_CPU5 0x28
-#define FMN_STNID_CPU6 0x30
-#define FMN_STNID_CPU7 0x38
-
-#define FMN_STNID_XGS0_TX 64
-#define FMN_STNID_XMAC0_00_TX 64
-#define FMN_STNID_XMAC0_01_TX 65
-#define FMN_STNID_XMAC0_02_TX 66
-#define FMN_STNID_XMAC0_03_TX 67
-#define FMN_STNID_XMAC0_04_TX 68
-#define FMN_STNID_XMAC0_05_TX 69
-#define FMN_STNID_XMAC0_06_TX 70
-#define FMN_STNID_XMAC0_07_TX 71
-#define FMN_STNID_XMAC0_08_TX 72
-#define FMN_STNID_XMAC0_09_TX 73
-#define FMN_STNID_XMAC0_10_TX 74
-#define FMN_STNID_XMAC0_11_TX 75
-#define FMN_STNID_XMAC0_12_TX 76
-#define FMN_STNID_XMAC0_13_TX 77
-#define FMN_STNID_XMAC0_14_TX 78
-#define FMN_STNID_XMAC0_15_TX 79
-
-#define FMN_STNID_XGS1_TX 80
-#define FMN_STNID_XMAC1_00_TX 80
-#define FMN_STNID_XMAC1_01_TX 81
-#define FMN_STNID_XMAC1_02_TX 82
-#define FMN_STNID_XMAC1_03_TX 83
-#define FMN_STNID_XMAC1_04_TX 84
-#define FMN_STNID_XMAC1_05_TX 85
-#define FMN_STNID_XMAC1_06_TX 86
-#define FMN_STNID_XMAC1_07_TX 87
-#define FMN_STNID_XMAC1_08_TX 88
-#define FMN_STNID_XMAC1_09_TX 89
-#define FMN_STNID_XMAC1_10_TX 90
-#define FMN_STNID_XMAC1_11_TX 91
-#define FMN_STNID_XMAC1_12_TX 92
-#define FMN_STNID_XMAC1_13_TX 93
-#define FMN_STNID_XMAC1_14_TX 94
-#define FMN_STNID_XMAC1_15_TX 95
-
-#define FMN_STNID_GMAC 96
-#define FMN_STNID_GMACJFR_0 96
-#define FMN_STNID_GMACRFR_0 97
-#define FMN_STNID_GMACTX0 98
-#define FMN_STNID_GMACTX1 99
-#define FMN_STNID_GMACTX2 100
-#define FMN_STNID_GMACTX3 101
-#define FMN_STNID_GMACJFR_1 102
-#define FMN_STNID_GMACRFR_1 103
-
-#define FMN_STNID_DMA 104
-#define FMN_STNID_DMA_0 104
-#define FMN_STNID_DMA_1 105
-#define FMN_STNID_DMA_2 106
-#define FMN_STNID_DMA_3 107
-
-#define FMN_STNID_XGS0FR 112
-#define FMN_STNID_XMAC0JFR 112
-#define FMN_STNID_XMAC0RFR 113
-
-#define FMN_STNID_XGS1FR 114
-#define FMN_STNID_XMAC1JFR 114
-#define FMN_STNID_XMAC1RFR 115
-#define FMN_STNID_SEC 120
-#define FMN_STNID_SEC0 120
-#define FMN_STNID_SEC1 121
-#define FMN_STNID_SEC2 122
-#define FMN_STNID_SEC3 123
-#define FMN_STNID_PK0 124
-#define FMN_STNID_SEC_RSA 124
-#define FMN_STNID_SEC_RSVD0 125
-#define FMN_STNID_SEC_RSVD1 126
-#define FMN_STNID_SEC_RSVD2 127
-
-#define FMN_STNID_GMAC1 80
-#define FMN_STNID_GMAC1_FR_0 81
-#define FMN_STNID_GMAC1_TX0 82
-#define FMN_STNID_GMAC1_TX1 83
-#define FMN_STNID_GMAC1_TX2 84
-#define FMN_STNID_GMAC1_TX3 85
-#define FMN_STNID_GMAC1_FR_1 87
-#define FMN_STNID_GMAC0 96
-#define FMN_STNID_GMAC0_FR_0 97
-#define FMN_STNID_GMAC0_TX0 98
-#define FMN_STNID_GMAC0_TX1 99
-#define FMN_STNID_GMAC0_TX2 100
-#define FMN_STNID_GMAC0_TX3 101
-#define FMN_STNID_GMAC0_FR_1 103
-#define FMN_STNID_CMP_0 108
-#define FMN_STNID_CMP_1 109
-#define FMN_STNID_CMP_2 110
-#define FMN_STNID_CMP_3 111
-#define FMN_STNID_PCIE_0 116
-#define FMN_STNID_PCIE_1 117
-#define FMN_STNID_PCIE_2 118
-#define FMN_STNID_PCIE_3 119
-#define FMN_STNID_XLS_PK0 121
-
-#define nlm_read_c2_cc0(s) __read_32bit_c2_register($16, s)
-#define nlm_read_c2_cc1(s) __read_32bit_c2_register($17, s)
-#define nlm_read_c2_cc2(s) __read_32bit_c2_register($18, s)
-#define nlm_read_c2_cc3(s) __read_32bit_c2_register($19, s)
-#define nlm_read_c2_cc4(s) __read_32bit_c2_register($20, s)
-#define nlm_read_c2_cc5(s) __read_32bit_c2_register($21, s)
-#define nlm_read_c2_cc6(s) __read_32bit_c2_register($22, s)
-#define nlm_read_c2_cc7(s) __read_32bit_c2_register($23, s)
-#define nlm_read_c2_cc8(s) __read_32bit_c2_register($24, s)
-#define nlm_read_c2_cc9(s) __read_32bit_c2_register($25, s)
-#define nlm_read_c2_cc10(s) __read_32bit_c2_register($26, s)
-#define nlm_read_c2_cc11(s) __read_32bit_c2_register($27, s)
-#define nlm_read_c2_cc12(s) __read_32bit_c2_register($28, s)
-#define nlm_read_c2_cc13(s) __read_32bit_c2_register($29, s)
-#define nlm_read_c2_cc14(s) __read_32bit_c2_register($30, s)
-#define nlm_read_c2_cc15(s) __read_32bit_c2_register($31, s)
-
-#define nlm_write_c2_cc0(s, v) __write_32bit_c2_register($16, s, v)
-#define nlm_write_c2_cc1(s, v) __write_32bit_c2_register($17, s, v)
-#define nlm_write_c2_cc2(s, v) __write_32bit_c2_register($18, s, v)
-#define nlm_write_c2_cc3(s, v) __write_32bit_c2_register($19, s, v)
-#define nlm_write_c2_cc4(s, v) __write_32bit_c2_register($20, s, v)
-#define nlm_write_c2_cc5(s, v) __write_32bit_c2_register($21, s, v)
-#define nlm_write_c2_cc6(s, v) __write_32bit_c2_register($22, s, v)
-#define nlm_write_c2_cc7(s, v) __write_32bit_c2_register($23, s, v)
-#define nlm_write_c2_cc8(s, v) __write_32bit_c2_register($24, s, v)
-#define nlm_write_c2_cc9(s, v) __write_32bit_c2_register($25, s, v)
-#define nlm_write_c2_cc10(s, v) __write_32bit_c2_register($26, s, v)
-#define nlm_write_c2_cc11(s, v) __write_32bit_c2_register($27, s, v)
-#define nlm_write_c2_cc12(s, v) __write_32bit_c2_register($28, s, v)
-#define nlm_write_c2_cc13(s, v) __write_32bit_c2_register($29, s, v)
-#define nlm_write_c2_cc14(s, v) __write_32bit_c2_register($30, s, v)
-#define nlm_write_c2_cc15(s, v) __write_32bit_c2_register($31, s, v)
-
-#define nlm_read_c2_status0() __read_32bit_c2_register($2, 0)
-#define nlm_write_c2_status0(v) __write_32bit_c2_register($2, 0, v)
-#define nlm_read_c2_status1() __read_32bit_c2_register($2, 1)
-#define nlm_write_c2_status1(v) __write_32bit_c2_register($2, 1, v)
-#define nlm_read_c2_status(sel) __read_32bit_c2_register($2, 0)
-#define nlm_read_c2_config() __read_32bit_c2_register($3, 0)
-#define nlm_write_c2_config(v) __write_32bit_c2_register($3, 0, v)
-#define nlm_read_c2_bucksize(b) __read_32bit_c2_register($4, b)
-#define nlm_write_c2_bucksize(b, v) __write_32bit_c2_register($4, b, v)
-
-#define nlm_read_c2_rx_msg0() __read_64bit_c2_register($1, 0)
-#define nlm_read_c2_rx_msg1() __read_64bit_c2_register($1, 1)
-#define nlm_read_c2_rx_msg2() __read_64bit_c2_register($1, 2)
-#define nlm_read_c2_rx_msg3() __read_64bit_c2_register($1, 3)
-
-#define nlm_write_c2_tx_msg0(v) __write_64bit_c2_register($0, 0, v)
-#define nlm_write_c2_tx_msg1(v) __write_64bit_c2_register($0, 1, v)
-#define nlm_write_c2_tx_msg2(v) __write_64bit_c2_register($0, 2, v)
-#define nlm_write_c2_tx_msg3(v) __write_64bit_c2_register($0, 3, v)
-
-#define FMN_STN_RX_QSIZE 256
-#define FMN_NSTATIONS 128
-#define FMN_CORE_NBUCKETS 8
-
-static inline void nlm_msgsnd(unsigned int stid)
-{
- __asm__ volatile (
- ".set push\n"
- ".set noreorder\n"
- ".set noat\n"
- "move $1, %0\n"
- "c2 0x10001\n" /* msgsnd $1 */
- ".set pop\n"
- : : "r" (stid) : "$1"
- );
-}
-
-static inline void nlm_msgld(unsigned int pri)
-{
- __asm__ volatile (
- ".set push\n"
- ".set noreorder\n"
- ".set noat\n"
- "move $1, %0\n"
- "c2 0x10002\n" /* msgld $1 */
- ".set pop\n"
- : : "r" (pri) : "$1"
- );
-}
-
-static inline void nlm_msgwait(unsigned int mask)
-{
- __asm__ volatile (
- ".set push\n"
- ".set noreorder\n"
- ".set noat\n"
- "move $8, %0\n"
- "c2 0x10003\n" /* msgwait $1 */
- ".set pop\n"
- : : "r" (mask) : "$1"
- );
-}
-
-/*
- * Disable interrupts and enable COP2 access
- */
-static inline uint32_t nlm_cop2_enable_irqsave(void)
-{
- uint32_t sr = read_c0_status();
-
- write_c0_status((sr & ~ST0_IE) | ST0_CU2);
- return sr;
-}
-
-static inline void nlm_cop2_disable_irqrestore(uint32_t sr)
-{
- write_c0_status(sr);
-}
-
-static inline void nlm_fmn_setup_intr(int irq, unsigned int tmask)
-{
- uint32_t config;
-
- config = (1 << 24) /* interrupt water mark - 1 msg */
- | (irq << 16) /* irq */
- | (tmask << 8) /* thread mask */
- | 0x2; /* enable watermark intr, disable empty intr */
- nlm_write_c2_config(config);
-}
-
-struct nlm_fmn_msg {
- uint64_t msg0;
- uint64_t msg1;
- uint64_t msg2;
- uint64_t msg3;
-};
-
-static inline int nlm_fmn_send(unsigned int size, unsigned int code,
- unsigned int stid, struct nlm_fmn_msg *msg)
-{
- unsigned int dest;
- uint32_t status;
- int i;
-
- /*
- * Make sure that all the writes pending at the cpu are flushed.
- * Any writes pending on CPU will not be see by devices. L1/L2
- * caches are coherent with IO, so no cache flush needed.
- */
- __asm __volatile("sync");
-
- /* Load TX message buffers */
- nlm_write_c2_tx_msg0(msg->msg0);
- nlm_write_c2_tx_msg1(msg->msg1);
- nlm_write_c2_tx_msg2(msg->msg2);
- nlm_write_c2_tx_msg3(msg->msg3);
- dest = ((size - 1) << 16) | (code << 8) | stid;
-
- /*
- * Retry a few times on credit fail, this should be a
- * transient condition, unless there is a configuration
- * failure, or the receiver is stuck.
- */
- for (i = 0; i < 8; i++) {
- nlm_msgsnd(dest);
- status = nlm_read_c2_status0();
- if ((status & 0x4) == 0)
- return 0;
- }
-
- /* If there is a credit failure, return error */
- return status & 0x06;
-}
-
-static inline int nlm_fmn_receive(int bucket, int *size, int *code, int *stid,
- struct nlm_fmn_msg *msg)
-{
- uint32_t status, tmp;
-
- nlm_msgld(bucket);
-
- /* wait for load pending to clear */
- do {
- status = nlm_read_c2_status0();
- } while ((status & 0x08) != 0);
-
- /* receive error bits */
- tmp = status & 0x30;
- if (tmp != 0)
- return tmp;
-
- *size = ((status & 0xc0) >> 6) + 1;
- *code = (status & 0xff00) >> 8;
- *stid = (status & 0x7f0000) >> 16;
- msg->msg0 = nlm_read_c2_rx_msg0();
- msg->msg1 = nlm_read_c2_rx_msg1();
- msg->msg2 = nlm_read_c2_rx_msg2();
- msg->msg3 = nlm_read_c2_rx_msg3();
-
- return 0;
-}
-
-struct xlr_fmn_info {
- int num_buckets;
- int start_stn_id;
- int end_stn_id;
- int credit_config[128];
-};
-
-struct xlr_board_fmn_config {
- int bucket_size[128]; /* size of buckets for all stations */
- struct xlr_fmn_info cpu[8];
- struct xlr_fmn_info gmac[2];
- struct xlr_fmn_info dma;
- struct xlr_fmn_info cmp;
- struct xlr_fmn_info sae;
- struct xlr_fmn_info xgmac[2];
-};
-
-extern int nlm_register_fmn_handler(int start, int end,
- void (*fn)(int, int, int, int, struct nlm_fmn_msg *, void *),
- void *arg);
-extern void xlr_percpu_fmn_init(void);
-extern void nlm_setup_fmn_irq(void);
-extern void xlr_board_info_setup(void);
-
-extern struct xlr_board_fmn_config xlr_board_fmn_config;
-#endif
diff --git a/arch/mips/include/asm/netlogic/xlr/gpio.h b/arch/mips/include/asm/netlogic/xlr/gpio.h
deleted file mode 100644
index 8492e835b110..000000000000
--- a/arch/mips/include/asm/netlogic/xlr/gpio.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _ASM_NLM_GPIO_H
-#define _ASM_NLM_GPIO_H
-
-#define GPIO_INT_EN_REG 0
-#define GPIO_INPUT_INVERSION_REG 1
-#define GPIO_IO_DIR_REG 2
-#define GPIO_IO_DATA_WR_REG 3
-#define GPIO_IO_DATA_RD_REG 4
-
-#define GPIO_SWRESET_REG 8
-#define GPIO_DRAM1_CNTRL_REG 9
-#define GPIO_DRAM1_RATIO_REG 10
-#define GPIO_DRAM1_RESET_REG 11
-#define GPIO_DRAM1_STATUS_REG 12
-#define GPIO_DRAM2_CNTRL_REG 13
-#define GPIO_DRAM2_RATIO_REG 14
-#define GPIO_DRAM2_RESET_REG 15
-#define GPIO_DRAM2_STATUS_REG 16
-
-#define GPIO_PWRON_RESET_CFG_REG 21
-#define GPIO_BIST_ALL_GO_STATUS_REG 24
-#define GPIO_BIST_CPU_GO_STATUS_REG 25
-#define GPIO_BIST_DEV_GO_STATUS_REG 26
-
-#define GPIO_FUSE_BANK_REG 35
-#define GPIO_CPU_RESET_REG 40
-#define GPIO_RNG_REG 43
-
-#define PWRON_RESET_PCMCIA_BOOT 17
-
-#define GPIO_LED_BITMAP 0x1700000
-#define GPIO_LED_0_SHIFT 20
-#define GPIO_LED_1_SHIFT 24
-
-#define GPIO_LED_OUTPUT_CODE_RESET 0x01
-#define GPIO_LED_OUTPUT_CODE_HARD_RESET 0x02
-#define GPIO_LED_OUTPUT_CODE_SOFT_RESET 0x03
-#define GPIO_LED_OUTPUT_CODE_MAIN 0x04
-
-#endif
diff --git a/arch/mips/include/asm/netlogic/xlr/iomap.h b/arch/mips/include/asm/netlogic/xlr/iomap.h
deleted file mode 100644
index ff4533d6ee64..000000000000
--- a/arch/mips/include/asm/netlogic/xlr/iomap.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _ASM_NLM_IOMAP_H
-#define _ASM_NLM_IOMAP_H
-
-#define DEFAULT_NETLOGIC_IO_BASE CKSEG1ADDR(0x1ef00000)
-#define NETLOGIC_IO_DDR2_CHN0_OFFSET 0x01000
-#define NETLOGIC_IO_DDR2_CHN1_OFFSET 0x02000
-#define NETLOGIC_IO_DDR2_CHN2_OFFSET 0x03000
-#define NETLOGIC_IO_DDR2_CHN3_OFFSET 0x04000
-#define NETLOGIC_IO_PIC_OFFSET 0x08000
-#define NETLOGIC_IO_UART_0_OFFSET 0x14000
-#define NETLOGIC_IO_UART_1_OFFSET 0x15100
-
-#define NETLOGIC_IO_SIZE 0x1000
-
-#define NETLOGIC_IO_BRIDGE_OFFSET 0x00000
-
-#define NETLOGIC_IO_RLD2_CHN0_OFFSET 0x05000
-#define NETLOGIC_IO_RLD2_CHN1_OFFSET 0x06000
-
-#define NETLOGIC_IO_SRAM_OFFSET 0x07000
-
-#define NETLOGIC_IO_PCIX_OFFSET 0x09000
-#define NETLOGIC_IO_HT_OFFSET 0x0A000
-
-#define NETLOGIC_IO_SECURITY_OFFSET 0x0B000
-
-#define NETLOGIC_IO_GMAC_0_OFFSET 0x0C000
-#define NETLOGIC_IO_GMAC_1_OFFSET 0x0D000
-#define NETLOGIC_IO_GMAC_2_OFFSET 0x0E000
-#define NETLOGIC_IO_GMAC_3_OFFSET 0x0F000
-
-/* XLS devices */
-#define NETLOGIC_IO_GMAC_4_OFFSET 0x20000
-#define NETLOGIC_IO_GMAC_5_OFFSET 0x21000
-#define NETLOGIC_IO_GMAC_6_OFFSET 0x22000
-#define NETLOGIC_IO_GMAC_7_OFFSET 0x23000
-
-#define NETLOGIC_IO_PCIE_0_OFFSET 0x1E000
-#define NETLOGIC_IO_PCIE_1_OFFSET 0x1F000
-#define NETLOGIC_IO_SRIO_0_OFFSET 0x1E000
-#define NETLOGIC_IO_SRIO_1_OFFSET 0x1F000
-
-#define NETLOGIC_IO_USB_0_OFFSET 0x24000
-#define NETLOGIC_IO_USB_1_OFFSET 0x25000
-
-#define NETLOGIC_IO_COMP_OFFSET 0x1D000
-/* end XLS devices */
-
-/* XLR devices */
-#define NETLOGIC_IO_SPI4_0_OFFSET 0x10000
-#define NETLOGIC_IO_XGMAC_0_OFFSET 0x11000
-#define NETLOGIC_IO_SPI4_1_OFFSET 0x12000
-#define NETLOGIC_IO_XGMAC_1_OFFSET 0x13000
-/* end XLR devices */
-
-#define NETLOGIC_IO_I2C_0_OFFSET 0x16000
-#define NETLOGIC_IO_I2C_1_OFFSET 0x17000
-
-#define NETLOGIC_IO_GPIO_OFFSET 0x18000
-#define NETLOGIC_IO_FLASH_OFFSET 0x19000
-#define NETLOGIC_IO_TB_OFFSET 0x1C000
-
-#define NETLOGIC_CPLD_OFFSET KSEG1ADDR(0x1d840000)
-
-/*
- * Base Address (Virtual) of the PCI Config address space
- * For now, choose 256M phys in kseg1 = 0xA0000000 + (1<<28)
- * Config space spans 256 (num of buses) * 256 (num functions) * 256 bytes
- * ie 1<<24 = 16M
- */
-#define DEFAULT_PCI_CONFIG_BASE 0x18000000
-#define DEFAULT_HT_TYPE0_CFG_BASE 0x16000000
-#define DEFAULT_HT_TYPE1_CFG_BASE 0x17000000
-
-#endif
diff --git a/arch/mips/include/asm/netlogic/xlr/msidef.h b/arch/mips/include/asm/netlogic/xlr/msidef.h
deleted file mode 100644
index c95d18edf12f..000000000000
--- a/arch/mips/include/asm/netlogic/xlr/msidef.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef ASM_RMI_MSIDEF_H
-#define ASM_RMI_MSIDEF_H
-
-/*
- * Constants for Intel APIC based MSI messages.
- * Adapted for the RMI XLR using identical defines
- */
-
-/*
- * Shifts for MSI data
- */
-
-#define MSI_DATA_VECTOR_SHIFT 0
-#define MSI_DATA_VECTOR_MASK 0x000000ff
-#define MSI_DATA_VECTOR(v) (((v) << MSI_DATA_VECTOR_SHIFT) & \
- MSI_DATA_VECTOR_MASK)
-
-#define MSI_DATA_DELIVERY_MODE_SHIFT 8
-#define MSI_DATA_DELIVERY_FIXED (0 << MSI_DATA_DELIVERY_MODE_SHIFT)
-#define MSI_DATA_DELIVERY_LOWPRI (1 << MSI_DATA_DELIVERY_MODE_SHIFT)
-
-#define MSI_DATA_LEVEL_SHIFT 14
-#define MSI_DATA_LEVEL_DEASSERT (0 << MSI_DATA_LEVEL_SHIFT)
-#define MSI_DATA_LEVEL_ASSERT (1 << MSI_DATA_LEVEL_SHIFT)
-
-#define MSI_DATA_TRIGGER_SHIFT 15
-#define MSI_DATA_TRIGGER_EDGE (0 << MSI_DATA_TRIGGER_SHIFT)
-#define MSI_DATA_TRIGGER_LEVEL (1 << MSI_DATA_TRIGGER_SHIFT)
-
-/*
- * Shift/mask fields for msi address
- */
-
-#define MSI_ADDR_BASE_HI 0
-#define MSI_ADDR_BASE_LO 0xfee00000
-
-#define MSI_ADDR_DEST_MODE_SHIFT 2
-#define MSI_ADDR_DEST_MODE_PHYSICAL (0 << MSI_ADDR_DEST_MODE_SHIFT)
-#define MSI_ADDR_DEST_MODE_LOGICAL (1 << MSI_ADDR_DEST_MODE_SHIFT)
-
-#define MSI_ADDR_REDIRECTION_SHIFT 3
-#define MSI_ADDR_REDIRECTION_CPU (0 << MSI_ADDR_REDIRECTION_SHIFT)
-#define MSI_ADDR_REDIRECTION_LOWPRI (1 << MSI_ADDR_REDIRECTION_SHIFT)
-
-#define MSI_ADDR_DEST_ID_SHIFT 12
-#define MSI_ADDR_DEST_ID_MASK 0x00ffff0
-#define MSI_ADDR_DEST_ID(dest) (((dest) << MSI_ADDR_DEST_ID_SHIFT) & \
- MSI_ADDR_DEST_ID_MASK)
-
-#endif /* ASM_RMI_MSIDEF_H */
diff --git a/arch/mips/include/asm/netlogic/xlr/pic.h b/arch/mips/include/asm/netlogic/xlr/pic.h
deleted file mode 100644
index 3c80a75233bd..000000000000
--- a/arch/mips/include/asm/netlogic/xlr/pic.h
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _ASM_NLM_XLR_PIC_H
-#define _ASM_NLM_XLR_PIC_H
-
-#define PIC_CLK_HZ 66666666
-#define pic_timer_freq() PIC_CLK_HZ
-
-/* PIC hardware interrupt numbers */
-#define PIC_IRT_WD_INDEX 0
-#define PIC_IRT_TIMER_0_INDEX 1
-#define PIC_IRT_TIMER_INDEX(i) ((i) + PIC_IRT_TIMER_0_INDEX)
-#define PIC_IRT_TIMER_1_INDEX 2
-#define PIC_IRT_TIMER_2_INDEX 3
-#define PIC_IRT_TIMER_3_INDEX 4
-#define PIC_IRT_TIMER_4_INDEX 5
-#define PIC_IRT_TIMER_5_INDEX 6
-#define PIC_IRT_TIMER_6_INDEX 7
-#define PIC_IRT_TIMER_7_INDEX 8
-#define PIC_IRT_CLOCK_INDEX PIC_IRT_TIMER_7_INDEX
-#define PIC_IRT_UART_0_INDEX 9
-#define PIC_IRT_UART_1_INDEX 10
-#define PIC_IRT_I2C_0_INDEX 11
-#define PIC_IRT_I2C_1_INDEX 12
-#define PIC_IRT_PCMCIA_INDEX 13
-#define PIC_IRT_GPIO_INDEX 14
-#define PIC_IRT_HYPER_INDEX 15
-#define PIC_IRT_PCIX_INDEX 16
-/* XLS */
-#define PIC_IRT_CDE_INDEX 15
-#define PIC_IRT_BRIDGE_TB_XLS_INDEX 16
-/* XLS */
-#define PIC_IRT_GMAC0_INDEX 17
-#define PIC_IRT_GMAC1_INDEX 18
-#define PIC_IRT_GMAC2_INDEX 19
-#define PIC_IRT_GMAC3_INDEX 20
-#define PIC_IRT_XGS0_INDEX 21
-#define PIC_IRT_XGS1_INDEX 22
-#define PIC_IRT_HYPER_FATAL_INDEX 23
-#define PIC_IRT_PCIX_FATAL_INDEX 24
-#define PIC_IRT_BRIDGE_AERR_INDEX 25
-#define PIC_IRT_BRIDGE_BERR_INDEX 26
-#define PIC_IRT_BRIDGE_TB_XLR_INDEX 27
-#define PIC_IRT_BRIDGE_AERR_NMI_INDEX 28
-/* XLS */
-#define PIC_IRT_GMAC4_INDEX 21
-#define PIC_IRT_GMAC5_INDEX 22
-#define PIC_IRT_GMAC6_INDEX 23
-#define PIC_IRT_GMAC7_INDEX 24
-#define PIC_IRT_BRIDGE_ERR_INDEX 25
-#define PIC_IRT_PCIE_LINK0_INDEX 26
-#define PIC_IRT_PCIE_LINK1_INDEX 27
-#define PIC_IRT_PCIE_LINK2_INDEX 23
-#define PIC_IRT_PCIE_LINK3_INDEX 24
-#define PIC_IRT_PCIE_XLSB0_LINK2_INDEX 28
-#define PIC_IRT_PCIE_XLSB0_LINK3_INDEX 29
-#define PIC_IRT_SRIO_LINK0_INDEX 26
-#define PIC_IRT_SRIO_LINK1_INDEX 27
-#define PIC_IRT_SRIO_LINK2_INDEX 28
-#define PIC_IRT_SRIO_LINK3_INDEX 29
-#define PIC_IRT_PCIE_INT_INDEX 28
-#define PIC_IRT_PCIE_FATAL_INDEX 29
-#define PIC_IRT_GPIO_B_INDEX 30
-#define PIC_IRT_USB_INDEX 31
-/* XLS */
-#define PIC_NUM_IRTS 32
-
-
-#define PIC_CLOCK_TIMER 7
-
-/* PIC Registers */
-#define PIC_CTRL 0x00
-#define PIC_CTRL_STE 8 /* timer enable start bit */
-#define PIC_IPI 0x04
-#define PIC_INT_ACK 0x06
-
-#define WD_MAX_VAL_0 0x08
-#define WD_MAX_VAL_1 0x09
-#define WD_MASK_0 0x0a
-#define WD_MASK_1 0x0b
-#define WD_HEARBEAT_0 0x0c
-#define WD_HEARBEAT_1 0x0d
-
-#define PIC_IRT_0_BASE 0x40
-#define PIC_IRT_1_BASE 0x80
-#define PIC_TIMER_MAXVAL_0_BASE 0x100
-#define PIC_TIMER_MAXVAL_1_BASE 0x110
-#define PIC_TIMER_COUNT_0_BASE 0x120
-#define PIC_TIMER_COUNT_1_BASE 0x130
-
-#define PIC_IRT_0(picintr) (PIC_IRT_0_BASE + (picintr))
-#define PIC_IRT_1(picintr) (PIC_IRT_1_BASE + (picintr))
-
-#define PIC_TIMER_MAXVAL_0(i) (PIC_TIMER_MAXVAL_0_BASE + (i))
-#define PIC_TIMER_MAXVAL_1(i) (PIC_TIMER_MAXVAL_1_BASE + (i))
-#define PIC_TIMER_COUNT_0(i) (PIC_TIMER_COUNT_0_BASE + (i))
-#define PIC_TIMER_COUNT_1(i) (PIC_TIMER_COUNT_0_BASE + (i))
-
-/*
- * Mapping between hardware interrupt numbers and IRQs on CPU
- * we use a simple scheme to map PIC interrupts 0-31 to IRQs
- * 8-39. This leaves the IRQ 0-7 for cpu interrupts like
- * count/compare and FMN
- */
-#define PIC_IRQ_BASE 8
-#define PIC_INTR_TO_IRQ(i) (PIC_IRQ_BASE + (i))
-#define PIC_IRQ_TO_INTR(i) ((i) - PIC_IRQ_BASE)
-
-#define PIC_IRT_FIRST_IRQ PIC_IRQ_BASE
-#define PIC_WD_IRQ PIC_INTR_TO_IRQ(PIC_IRT_WD_INDEX)
-#define PIC_TIMER_0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_0_INDEX)
-#define PIC_TIMER_1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_1_INDEX)
-#define PIC_TIMER_2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_2_INDEX)
-#define PIC_TIMER_3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_3_INDEX)
-#define PIC_TIMER_4_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_4_INDEX)
-#define PIC_TIMER_5_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_5_INDEX)
-#define PIC_TIMER_6_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_6_INDEX)
-#define PIC_TIMER_7_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_7_INDEX)
-#define PIC_CLOCK_IRQ (PIC_TIMER_7_IRQ)
-#define PIC_UART_0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_UART_0_INDEX)
-#define PIC_UART_1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_UART_1_INDEX)
-#define PIC_I2C_0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_I2C_0_INDEX)
-#define PIC_I2C_1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_I2C_1_INDEX)
-#define PIC_PCMCIA_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCMCIA_INDEX)
-#define PIC_GPIO_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GPIO_INDEX)
-#define PIC_HYPER_IRQ PIC_INTR_TO_IRQ(PIC_IRT_HYPER_INDEX)
-#define PIC_PCIX_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIX_INDEX)
-/* XLS */
-#define PIC_CDE_IRQ PIC_INTR_TO_IRQ(PIC_IRT_CDE_INDEX)
-#define PIC_BRIDGE_TB_XLS_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_TB_XLS_INDEX)
-/* end XLS */
-#define PIC_GMAC_0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC0_INDEX)
-#define PIC_GMAC_1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC1_INDEX)
-#define PIC_GMAC_2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC2_INDEX)
-#define PIC_GMAC_3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC3_INDEX)
-#define PIC_XGS_0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_XGS0_INDEX)
-#define PIC_XGS_1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_XGS1_INDEX)
-#define PIC_HYPER_FATAL_IRQ PIC_INTR_TO_IRQ(PIC_IRT_HYPER_FATAL_INDEX)
-#define PIC_PCIX_FATAL_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIX_FATAL_INDEX)
-#define PIC_BRIDGE_AERR_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_AERR_INDEX)
-#define PIC_BRIDGE_BERR_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_BERR_INDEX)
-#define PIC_BRIDGE_TB_XLR_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_TB_XLR_INDEX)
-#define PIC_BRIDGE_AERR_NMI_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_AERR_NMI_INDEX)
-/* XLS defines */
-#define PIC_GMAC_4_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC4_INDEX)
-#define PIC_GMAC_5_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC5_INDEX)
-#define PIC_GMAC_6_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC6_INDEX)
-#define PIC_GMAC_7_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC7_INDEX)
-#define PIC_BRIDGE_ERR_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_ERR_INDEX)
-#define PIC_PCIE_LINK0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK0_INDEX)
-#define PIC_PCIE_LINK1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK1_INDEX)
-#define PIC_PCIE_LINK2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK2_INDEX)
-#define PIC_PCIE_LINK3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK3_INDEX)
-#define PIC_PCIE_XLSB0_LINK2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_XLSB0_LINK2_INDEX)
-#define PIC_PCIE_XLSB0_LINK3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_XLSB0_LINK3_INDEX)
-#define PIC_SRIO_LINK0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK0_INDEX)
-#define PIC_SRIO_LINK1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK1_INDEX)
-#define PIC_SRIO_LINK2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK2_INDEX)
-#define PIC_SRIO_LINK3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK3_INDEX)
-#define PIC_PCIE_INT_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_INT__INDEX)
-#define PIC_PCIE_FATAL_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_FATAL_INDEX)
-#define PIC_GPIO_B_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GPIO_B_INDEX)
-#define PIC_USB_IRQ PIC_INTR_TO_IRQ(PIC_IRT_USB_INDEX)
-#define PIC_IRT_LAST_IRQ PIC_USB_IRQ
-/* end XLS */
-
-#ifndef __ASSEMBLY__
-
-#define PIC_IRQ_IS_EDGE_TRIGGERED(irq) (((irq) >= PIC_TIMER_0_IRQ) && \
- ((irq) <= PIC_TIMER_7_IRQ))
-#define PIC_IRQ_IS_IRT(irq) (((irq) >= PIC_IRT_FIRST_IRQ) && \
- ((irq) <= PIC_IRT_LAST_IRQ))
-
-static inline int
-nlm_irq_to_irt(int irq)
-{
- if (PIC_IRQ_IS_IRT(irq) == 0)
- return -1;
-
- return PIC_IRQ_TO_INTR(irq);
-}
-
-static inline int
-nlm_irt_to_irq(int irt)
-{
-
- return PIC_INTR_TO_IRQ(irt);
-}
-
-static inline void
-nlm_pic_enable_irt(uint64_t base, int irt)
-{
- uint32_t reg;
-
- reg = nlm_read_reg(base, PIC_IRT_1(irt));
- nlm_write_reg(base, PIC_IRT_1(irt), reg | (1u << 31));
-}
-
-static inline void
-nlm_pic_disable_irt(uint64_t base, int irt)
-{
- uint32_t reg;
-
- reg = nlm_read_reg(base, PIC_IRT_1(irt));
- nlm_write_reg(base, PIC_IRT_1(irt), reg & ~(1u << 31));
-}
-
-static inline void
-nlm_pic_send_ipi(uint64_t base, int hwt, int irq, int nmi)
-{
- unsigned int tid, pid;
-
- tid = hwt & 0x3;
- pid = (hwt >> 2) & 0x07;
- nlm_write_reg(base, PIC_IPI,
- (pid << 20) | (tid << 16) | (nmi << 8) | irq);
-}
-
-static inline void
-nlm_pic_ack(uint64_t base, int irt)
-{
- nlm_write_reg(base, PIC_INT_ACK, 1u << irt);
-}
-
-static inline void
-nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt, int en)
-{
- nlm_write_reg(base, PIC_IRT_0(irt), (1u << hwt));
- /* local scheduling, invalid, level by default */
- nlm_write_reg(base, PIC_IRT_1(irt),
- (en << 30) | (1 << 6) | irq);
-}
-
-static inline uint64_t
-nlm_pic_read_timer(uint64_t base, int timer)
-{
- uint32_t up1, up2, low;
-
- up1 = nlm_read_reg(base, PIC_TIMER_COUNT_1(timer));
- low = nlm_read_reg(base, PIC_TIMER_COUNT_0(timer));
- up2 = nlm_read_reg(base, PIC_TIMER_COUNT_1(timer));
-
- if (up1 != up2) /* wrapped, get the new low */
- low = nlm_read_reg(base, PIC_TIMER_COUNT_0(timer));
- return ((uint64_t)up2 << 32) | low;
-
-}
-
-static inline uint32_t
-nlm_pic_read_timer32(uint64_t base, int timer)
-{
- return nlm_read_reg(base, PIC_TIMER_COUNT_0(timer));
-}
-
-static inline void
-nlm_pic_set_timer(uint64_t base, int timer, uint64_t value, int irq, int cpu)
-{
- uint32_t up, low;
- uint64_t pic_ctrl = nlm_read_reg(base, PIC_CTRL);
- int en;
-
- en = (irq > 0);
- up = value >> 32;
- low = value & 0xFFFFFFFF;
- nlm_write_reg(base, PIC_TIMER_MAXVAL_0(timer), low);
- nlm_write_reg(base, PIC_TIMER_MAXVAL_1(timer), up);
- nlm_pic_init_irt(base, PIC_IRT_TIMER_INDEX(timer), irq, cpu, 0);
-
- /* enable the timer */
- pic_ctrl |= (1 << (PIC_CTRL_STE + timer));
- nlm_write_reg(base, PIC_CTRL, pic_ctrl);
-}
-#endif
-#endif /* _ASM_NLM_XLR_PIC_H */
diff --git a/arch/mips/include/asm/netlogic/xlr/xlr.h b/arch/mips/include/asm/netlogic/xlr/xlr.h
deleted file mode 100644
index ceb991ca8436..000000000000
--- a/arch/mips/include/asm/netlogic/xlr/xlr.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _ASM_NLM_XLR_H
-#define _ASM_NLM_XLR_H
-
-/* SMP helpers */
-void xlr_wakeup_secondary_cpus(void);
-
-/* XLS B silicon "Rook" */
-static inline unsigned int nlm_chip_is_xls_b(void)
-{
- uint32_t prid = read_c0_prid();
-
- return ((prid & 0xf000) == 0x4000);
-}
-
-/* XLR chip types */
-/* The XLS product line has chip versions 0x[48c]? */
-static inline unsigned int nlm_chip_is_xls(void)
-{
- uint32_t prid = read_c0_prid();
-
- return ((prid & 0xf000) == 0x8000 || (prid & 0xf000) == 0x4000 ||
- (prid & 0xf000) == 0xc000);
-}
-
-#endif /* _ASM_NLM_XLR_H */
diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
index 0c3550c82b72..3a19486af369 100644
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -207,16 +207,6 @@ struct octeon_cvmseg_state {
[cpu_dcache_line_size() / sizeof(unsigned long)];
};
-#elif defined(CONFIG_CPU_XLP)
-struct nlm_cop2_state {
- u64 rx[4];
- u64 tx[4];
- u32 tx_msg_status;
- u32 rx_msg_status;
-};
-
-#define COP2_INIT \
- .cp2 = {{0}, {0}, 0, 0},
#else
#define COP2_INIT
#endif
@@ -274,9 +264,6 @@ struct thread_struct {
#ifdef CONFIG_CPU_CAVIUM_OCTEON
struct octeon_cop2_state cp2 __attribute__ ((__aligned__(128)));
struct octeon_cvmseg_state cvmseg __attribute__ ((__aligned__(128)));
-#endif
-#ifdef CONFIG_CPU_XLP
- struct nlm_cop2_state cp2;
#endif
struct mips_abi *abi;
};
diff --git a/arch/mips/include/asm/vermagic.h b/arch/mips/include/asm/vermagic.h
index 371c1873df0d..0904de0b5e09 100644
--- a/arch/mips/include/asm/vermagic.h
+++ b/arch/mips/include/asm/vermagic.h
@@ -54,10 +54,6 @@
#define MODULE_PROC_FAMILY "OCTEON "
#elif defined CONFIG_CPU_P5600
#define MODULE_PROC_FAMILY "P5600 "
-#elif defined CONFIG_CPU_XLR
-#define MODULE_PROC_FAMILY "XLR "
-#elif defined CONFIG_CPU_XLP
-#define MODULE_PROC_FAMILY "XLP "
#else
#error MODULE_PROC_FAMILY undefined for your processor configuration
#endif
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 630fcb4cb30e..ac0e2cfc6d57 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -1886,87 +1886,6 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
}
}
-static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)
-{
- decode_configs(c);
-
- if ((c->processor_id & PRID_IMP_MASK) == PRID_IMP_NETLOGIC_AU13XX) {
- c->cputype = CPU_ALCHEMY;
- __cpu_name[cpu] = "Au1300";
- /* following stuff is not for Alchemy */
- return;
- }
-
- c->options = (MIPS_CPU_TLB |
- MIPS_CPU_4KEX |
- MIPS_CPU_COUNTER |
- MIPS_CPU_DIVEC |
- MIPS_CPU_WATCH |
- MIPS_CPU_EJTAG |
- MIPS_CPU_LLSC);
-
- switch (c->processor_id & PRID_IMP_MASK) {
- case PRID_IMP_NETLOGIC_XLP2XX:
- case PRID_IMP_NETLOGIC_XLP9XX:
- case PRID_IMP_NETLOGIC_XLP5XX:
- c->cputype = CPU_XLP;
- __cpu_name[cpu] = "Broadcom XLPII";
- break;
-
- case PRID_IMP_NETLOGIC_XLP8XX:
- case PRID_IMP_NETLOGIC_XLP3XX:
- c->cputype = CPU_XLP;
- __cpu_name[cpu] = "Netlogic XLP";
- break;
-
- case PRID_IMP_NETLOGIC_XLR732:
- case PRID_IMP_NETLOGIC_XLR716:
- case PRID_IMP_NETLOGIC_XLR532:
- case PRID_IMP_NETLOGIC_XLR308:
- case PRID_IMP_NETLOGIC_XLR532C:
- case PRID_IMP_NETLOGIC_XLR516C:
- case PRID_IMP_NETLOGIC_XLR508C:
- case PRID_IMP_NETLOGIC_XLR308C:
- c->cputype = CPU_XLR;
- __cpu_name[cpu] = "Netlogic XLR";
- break;
-
- case PRID_IMP_NETLOGIC_XLS608:
- case PRID_IMP_NETLOGIC_XLS408:
- case PRID_IMP_NETLOGIC_XLS404:
- case PRID_IMP_NETLOGIC_XLS208:
- case PRID_IMP_NETLOGIC_XLS204:
- case PRID_IMP_NETLOGIC_XLS108:
- case PRID_IMP_NETLOGIC_XLS104:
- case PRID_IMP_NETLOGIC_XLS616B:
- case PRID_IMP_NETLOGIC_XLS608B:
- case PRID_IMP_NETLOGIC_XLS416B:
- case PRID_IMP_NETLOGIC_XLS412B:
- case PRID_IMP_NETLOGIC_XLS408B:
- case PRID_IMP_NETLOGIC_XLS404B:
- c->cputype = CPU_XLR;
- __cpu_name[cpu] = "Netlogic XLS";
- break;
-
- default:
- pr_info("Unknown Netlogic chip id [%02x]!\n",
- c->processor_id);
- c->cputype = CPU_XLR;
- break;
- }
-
- if (c->cputype == CPU_XLP) {
- set_isa(c, MIPS_CPU_ISA_M64R2);
- c->options |= (MIPS_CPU_FPU | MIPS_CPU_ULRI | MIPS_CPU_MCHECK);
- /* This will be updated again after all threads are woken up */
- c->tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
- } else {
- set_isa(c, MIPS_CPU_ISA_M64R1);
- c->tlbsize = ((read_c0_config1() >> 25) & 0x3f) + 1;
- }
- c->kscratch_mask = 0xf;
-}
-
#ifdef CONFIG_64BIT
/* For use by uaccess.h */
u64 __ua_limit;
@@ -2031,9 +1950,6 @@ void cpu_probe(void)
case PRID_COMP_INGENIC_E1:
cpu_probe_ingenic(c, cpu);
break;
- case PRID_COMP_NETLOGIC:
- cpu_probe_netlogic(c, cpu);
- break;
}
BUG_ON(!__cpu_name[cpu]);
diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c
index 1aca3b4db904..c81b3a039470 100644
--- a/arch/mips/kernel/idle.c
+++ b/arch/mips/kernel/idle.c
@@ -175,8 +175,6 @@ void __init check_wait(void)
case CPU_CAVIUM_OCTEON3:
case CPU_XBURST:
case CPU_LOONGSON32:
- case CPU_XLR:
- case CPU_XLP:
cpu_wait = r4k_wait;
break;
case CPU_LOONGSON64:
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index 22e22c2de1c9..1641d274fe37 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -1002,15 +1002,6 @@ static const struct mips_perf_event bmips5000_event_map
[PERF_COUNT_HW_BRANCH_MISSES] = { 0x02, CNTR_ODD, T },
};
-static const struct mips_perf_event xlp_event_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = { 0x01, CNTR_ALL },
- [PERF_COUNT_HW_INSTRUCTIONS] = { 0x18, CNTR_ALL }, /* PAPI_TOT_INS */
- [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x04, CNTR_ALL }, /* PAPI_L1_ICA */
- [PERF_COUNT_HW_CACHE_MISSES] = { 0x07, CNTR_ALL }, /* PAPI_L1_ICM */
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x1b, CNTR_ALL }, /* PAPI_BR_CN */
- [PERF_COUNT_HW_BRANCH_MISSES] = { 0x1c, CNTR_ALL }, /* PAPI_BR_MSP */
-};
-
/* 24K/34K/1004K/interAptiv/loongson1 cores share the same cache event map. */
static const struct mips_perf_event mipsxxcore_cache_map
[PERF_COUNT_HW_CACHE_MAX]
@@ -1477,63 +1468,6 @@ static const struct mips_perf_event octeon_cache_map
},
};
-static const struct mips_perf_event xlp_cache_map
- [PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-[C(L1D)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = { 0x31, CNTR_ALL }, /* PAPI_L1_DCR */
- [C(RESULT_MISS)] = { 0x30, CNTR_ALL }, /* PAPI_L1_LDM */
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = { 0x2f, CNTR_ALL }, /* PAPI_L1_DCW */
- [C(RESULT_MISS)] = { 0x2e, CNTR_ALL }, /* PAPI_L1_STM */
- },
-},
-[C(L1I)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = { 0x04, CNTR_ALL }, /* PAPI_L1_ICA */
- [C(RESULT_MISS)] = { 0x07, CNTR_ALL }, /* PAPI_L1_ICM */
- },
-},
-[C(LL)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = { 0x35, CNTR_ALL }, /* PAPI_L2_DCR */
- [C(RESULT_MISS)] = { 0x37, CNTR_ALL }, /* PAPI_L2_LDM */
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = { 0x34, CNTR_ALL }, /* PAPI_L2_DCA */
- [C(RESULT_MISS)] = { 0x36, CNTR_ALL }, /* PAPI_L2_DCM */
- },
-},
-[C(DTLB)] = {
- /*
- * Only general DTLB misses are counted use the same event for
- * read and write.
- */
- [C(OP_READ)] = {
- [C(RESULT_MISS)] = { 0x2d, CNTR_ALL }, /* PAPI_TLB_DM */
- },
- [C(OP_WRITE)] = {
- [C(RESULT_MISS)] = { 0x2d, CNTR_ALL }, /* PAPI_TLB_DM */
- },
-},
-[C(ITLB)] = {
- [C(OP_READ)] = {
- [C(RESULT_MISS)] = { 0x08, CNTR_ALL }, /* PAPI_TLB_IM */
- },
- [C(OP_WRITE)] = {
- [C(RESULT_MISS)] = { 0x08, CNTR_ALL }, /* PAPI_TLB_IM */
- },
-},
-[C(BPU)] = {
- [C(OP_READ)] = {
- [C(RESULT_MISS)] = { 0x25, CNTR_ALL },
- },
-},
-};
-
static int __hw_perf_event_init(struct perf_event *event)
{
struct perf_event_attr *attr = &event->attr;
@@ -1953,20 +1887,6 @@ static const struct mips_perf_event *octeon_pmu_map_raw_event(u64 config)
return &raw_event;
}
-static const struct mips_perf_event *xlp_pmu_map_raw_event(u64 config)
-{
- unsigned int raw_id = config & 0xff;
-
- /* Only 1-63 are defined */
- if ((raw_id < 0x01) || (raw_id > 0x3f))
- return ERR_PTR(-EOPNOTSUPP);
-
- raw_event.cntr_mask = CNTR_ALL;
- raw_event.event_id = raw_id;
-
- return &raw_event;
-}
-
static int __init
init_hw_perf_events(void)
{
@@ -2091,12 +2011,6 @@ init_hw_perf_events(void)
mipspmu.general_event_map = &bmips5000_event_map;
mipspmu.cache_event_map = &bmips5000_cache_map;
break;
- case CPU_XLP:
- mipspmu.name = "xlp";
- mipspmu.general_event_map = &xlp_event_map;
- mipspmu.cache_event_map = &xlp_cache_map;
- mipspmu.map_raw_event = xlp_pmu_map_raw_event;
- break;
default:
pr_cont("Either hardware does not support performance "
"counters, or not yet implemented.\n");
diff --git a/arch/mips/kvm/entry.c b/arch/mips/kvm/entry.c
index 8131fb2bdf97..aceed14aa1f7 100644
--- a/arch/mips/kvm/entry.c
+++ b/arch/mips/kvm/entry.c
@@ -104,13 +104,7 @@ static void *kvm_mips_build_ret_to_host(void *addr);
*/
static int c0_kscratch(void)
{
- switch (boot_cpu_type()) {
- case CPU_XLP:
- case CPU_XLR:
- return 22;
- default:
- return 31;
- }
+ return 31;
}
/**
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 74b09e801c3a..50261fd8eb21 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1410,7 +1410,6 @@ static void probe_pcache(void)
case CPU_I6500:
case CPU_SB1:
case CPU_SB1A:
- case CPU_XLR:
c->dcache.flags |= MIPS_CACHE_PINDEX;
break;
@@ -1699,7 +1698,6 @@ static void setup_scache(void)
return;
case CPU_CAVIUM_OCTEON3:
- case CPU_XLP:
/* don't need to worry about L2, fully coherent */
return;
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 9adad24c2e65..b131e6a77383 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -325,13 +325,7 @@ static unsigned int kscratch_used_mask;
static inline int __maybe_unused c0_kscratch(void)
{
- switch (current_cpu_type()) {
- case CPU_XLP:
- case CPU_XLR:
- return 22;
- default:
- return 31;
- }
+ return 31;
}
static int allocate_kscratch(void)
@@ -553,7 +547,6 @@ void build_tlb_write_entry(u32 **p, struct uasm_label **l,
case CPU_5KC:
case CPU_TX49XX:
case CPU_PR4450:
- case CPU_XLR:
uasm_i_nop(p);
tlbw(p);
break;
diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig
deleted file mode 100644
index 412351c5acc6..000000000000
--- a/arch/mips/netlogic/Kconfig
+++ /dev/null
@@ -1,86 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if NLM_XLP_BOARD || NLM_XLR_BOARD
-
-if NLM_XLP_BOARD
-config DT_XLP_EVP
- bool "Built-in device tree for XLP EVP boards"
- default y
- select BUILTIN_DTB
- help
- Add an FDT blob for XLP EVP boards into the kernel.
- This DTB will be used if the firmware does not pass in a DTB
- pointer to the kernel. The corresponding DTS file is at
- arch/mips/netlogic/dts/xlp_evp.dts
-
-config DT_XLP_SVP
- bool "Built-in device tree for XLP SVP boards"
- default y
- select BUILTIN_DTB
- help
- Add an FDT blob for XLP VP boards into the kernel.
- This DTB will be used if the firmware does not pass in a DTB
- pointer to the kernel. The corresponding DTS file is at
- arch/mips/netlogic/dts/xlp_svp.dts
-
-config DT_XLP_FVP
- bool "Built-in device tree for XLP FVP boards"
- default y
- select BUILTIN_DTB
- help
- Add an FDT blob for XLP FVP board into the kernel.
- This DTB will be used if the firmware does not pass in a DTB
- pointer to the kernel. The corresponding DTS file is at
- arch/mips/netlogic/dts/xlp_fvp.dts
-
-config DT_XLP_GVP
- bool "Built-in device tree for XLP GVP boards"
- default y
- select BUILTIN_DTB
- help
- Add an FDT blob for XLP GVP board into the kernel.
- This DTB will be used if the firmware does not pass in a DTB
- pointer to the kernel. The corresponding DTS file is at
- arch/mips/netlogic/dts/xlp_gvp.dts
-
-config DT_XLP_RVP
- bool "Built-in device tree for XLP RVP boards"
- default y
- help
- Add an FDT blob for XLP RVP board into the kernel.
- This DTB will be used if the firmware does not pass in a DTB
- pointer to the kernel. The corresponding DTS file is at
- arch/mips/netlogic/dts/xlp_rvp.dts
-
-config NLM_MULTINODE
- bool "Support for multi-chip boards"
- depends on NLM_XLP_BOARD
- default n
- help
- Add support for boards with 2 or 4 XLPs connected over ICI.
-
-if NLM_MULTINODE
-choice
- prompt "Number of XLPs on the board"
- default NLM_MULTINODE_2
- help
- In the multi-node case, specify the number of SoCs on the board.
-
-config NLM_MULTINODE_2
- bool "Dual-XLP board"
- help
- Support boards with upto two XLPs connected over ICI.
-
-config NLM_MULTINODE_4
- bool "Quad-XLP board"
- help
- Support boards with upto four XLPs connected over ICI.
-
-endchoice
-
-endif
-endif
-
-config NLM_COMMON
- bool
-
-endif
diff --git a/arch/mips/netlogic/Makefile b/arch/mips/netlogic/Makefile
deleted file mode 100644
index c53561589db9..000000000000
--- a/arch/mips/netlogic/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_NLM_COMMON) += common/
-obj-$(CONFIG_CPU_XLR) += xlr/
-obj-$(CONFIG_CPU_XLP) += xlp/
diff --git a/arch/mips/netlogic/Platform b/arch/mips/netlogic/Platform
deleted file mode 100644
index 4195a097f5f2..000000000000
--- a/arch/mips/netlogic/Platform
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# NETLOGIC includes
-#
-cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/mach-netlogic
-cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/netlogic
-
-#
-# use mips64 if xlr is not available
-#
-cflags-$(CONFIG_CPU_XLR) += $(call cc-option,-march=xlr,-march=mips64)
-cflags-$(CONFIG_CPU_XLP) += $(call cc-option,-march=xlp,-march=mips64r2)
-
-#
-# NETLOGIC processor support
-#
-load-$(CONFIG_NLM_COMMON) += 0xffffffff80100000
diff --git a/arch/mips/netlogic/common/Makefile b/arch/mips/netlogic/common/Makefile
deleted file mode 100644
index 89f6e3f39fed..000000000000
--- a/arch/mips/netlogic/common/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y += irq.o time.o
-obj-y += reset.o
-obj-$(CONFIG_SMP) += smp.o smpboot.o
-obj-$(CONFIG_EARLY_PRINTK) += earlycons.o
diff --git a/arch/mips/netlogic/common/earlycons.c b/arch/mips/netlogic/common/earlycons.c
deleted file mode 100644
index 8f5bc1597550..000000000000
--- a/arch/mips/netlogic/common/earlycons.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-
-#include <asm/mipsregs.h>
-#include <asm/setup.h>
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/common.h>
-
-#if defined(CONFIG_CPU_XLP)
-#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/xlp-hal/uart.h>
-#elif defined(CONFIG_CPU_XLR)
-#include <asm/netlogic/xlr/iomap.h>
-#endif
-
-void prom_putchar(char c)
-{
- uint64_t uartbase;
-
-#if defined(CONFIG_CPU_XLP)
- uartbase = nlm_get_uart_regbase(0, 0);
-#elif defined(CONFIG_CPU_XLR)
- uartbase = nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET);
-#endif
- while ((nlm_read_reg(uartbase, UART_LSR) & UART_LSR_THRE) == 0)
- ;
- nlm_write_reg(uartbase, UART_TX, c);
-}
diff --git a/arch/mips/netlogic/common/irq.c b/arch/mips/netlogic/common/irq.c
deleted file mode 100644
index c25a2ce5e29f..000000000000
--- a/arch/mips/netlogic/common/irq.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/irq.h>
-
-#include <linux/irqdomain.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#include <asm/errno.h>
-#include <asm/signal.h>
-#include <asm/ptrace.h>
-#include <asm/mipsregs.h>
-#include <asm/thread_info.h>
-
-#include <asm/netlogic/mips-extns.h>
-#include <asm/netlogic/interrupt.h>
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/common.h>
-
-#if defined(CONFIG_CPU_XLP)
-#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/xlp-hal/pic.h>
-#elif defined(CONFIG_CPU_XLR)
-#include <asm/netlogic/xlr/iomap.h>
-#include <asm/netlogic/xlr/pic.h>
-#include <asm/netlogic/xlr/fmn.h>
-#else
-#error "Unknown CPU"
-#endif
-
-#ifdef CONFIG_SMP
-#define SMP_IRQ_MASK ((1ULL << IRQ_IPI_SMP_FUNCTION) | \
- (1ULL << IRQ_IPI_SMP_RESCHEDULE))
-#else
-#define SMP_IRQ_MASK 0
-#endif
-#define PERCPU_IRQ_MASK (SMP_IRQ_MASK | (1ull << IRQ_TIMER) | \
- (1ull << IRQ_FMN))
-
-struct nlm_pic_irq {
- void (*extra_ack)(struct irq_data *);
- struct nlm_soc_info *node;
- int picirq;
- int irt;
- int flags;
-};
-
-static void xlp_pic_enable(struct irq_data *d)
-{
- unsigned long flags;
- struct nlm_pic_irq *pd = irq_data_get_irq_chip_data(d);
-
- BUG_ON(!pd);
- spin_lock_irqsave(&pd->node->piclock, flags);
- nlm_pic_enable_irt(pd->node->picbase, pd->irt);
- spin_unlock_irqrestore(&pd->node->piclock, flags);
-}
-
-static void xlp_pic_disable(struct irq_data *d)
-{
- struct nlm_pic_irq *pd = irq_data_get_irq_chip_data(d);
- unsigned long flags;
-
- BUG_ON(!pd);
- spin_lock_irqsave(&pd->node->piclock, flags);
- nlm_pic_disable_irt(pd->node->picbase, pd->irt);
- spin_unlock_irqrestore(&pd->node->piclock, flags);
-}
-
-static void xlp_pic_mask_ack(struct irq_data *d)
-{
- struct nlm_pic_irq *pd = irq_data_get_irq_chip_data(d);
-
- clear_c0_eimr(pd->picirq);
- ack_c0_eirr(pd->picirq);
-}
-
-static void xlp_pic_unmask(struct irq_data *d)
-{
- struct nlm_pic_irq *pd = irq_data_get_irq_chip_data(d);
-
- BUG_ON(!pd);
-
- if (pd->extra_ack)
- pd->extra_ack(d);
-
- /* re-enable the intr on this cpu */
- set_c0_eimr(pd->picirq);
-
- /* Ack is a single write, no need to lock */
- nlm_pic_ack(pd->node->picbase, pd->irt);
-}
-
-static struct irq_chip xlp_pic = {
- .name = "XLP-PIC",
- .irq_enable = xlp_pic_enable,
- .irq_disable = xlp_pic_disable,
- .irq_mask_ack = xlp_pic_mask_ack,
- .irq_unmask = xlp_pic_unmask,
-};
-
-static void cpuintr_disable(struct irq_data *d)
-{
- clear_c0_eimr(d->irq);
-}
-
-static void cpuintr_enable(struct irq_data *d)
-{
- set_c0_eimr(d->irq);
-}
-
-static void cpuintr_ack(struct irq_data *d)
-{
- ack_c0_eirr(d->irq);
-}
-
-/*
- * Chip definition for CPU originated interrupts(timer, msg) and
- * IPIs
- */
-struct irq_chip nlm_cpu_intr = {
- .name = "XLP-CPU-INTR",
- .irq_enable = cpuintr_enable,
- .irq_disable = cpuintr_disable,
- .irq_mask = cpuintr_disable,
- .irq_ack = cpuintr_ack,
- .irq_eoi = cpuintr_enable,
-};
-
-static void __init nlm_init_percpu_irqs(void)
-{
- int i;
-
- for (i = 0; i < PIC_IRT_FIRST_IRQ; i++)
- irq_set_chip_and_handler(i, &nlm_cpu_intr, handle_percpu_irq);
-#ifdef CONFIG_SMP
- irq_set_chip_and_handler(IRQ_IPI_SMP_FUNCTION, &nlm_cpu_intr,
- nlm_smp_function_ipi_handler);
- irq_set_chip_and_handler(IRQ_IPI_SMP_RESCHEDULE, &nlm_cpu_intr,
- nlm_smp_resched_ipi_handler);
-#endif
-}
-
-
-void nlm_setup_pic_irq(int node, int picirq, int irq, int irt)
-{
- struct nlm_pic_irq *pic_data;
- int xirq;
-
- xirq = nlm_irq_to_xirq(node, irq);
- pic_data = kzalloc(sizeof(*pic_data), GFP_KERNEL);
- BUG_ON(pic_data == NULL);
- pic_data->irt = irt;
- pic_data->picirq = picirq;
- pic_data->node = nlm_get_node(node);
- irq_set_chip_and_handler(xirq, &xlp_pic, handle_level_irq);
- irq_set_chip_data(xirq, pic_data);
-}
-
-void nlm_set_pic_extra_ack(int node, int irq, void (*xack)(struct irq_data *))
-{
- struct nlm_pic_irq *pic_data;
- int xirq;
-
- xirq = nlm_irq_to_xirq(node, irq);
- pic_data = irq_get_chip_data(xirq);
- if (WARN_ON(!pic_data))
- return;
- pic_data->extra_ack = xack;
-}
-
-static void nlm_init_node_irqs(int node)
-{
- struct nlm_soc_info *nodep;
- int i, irt;
-
- pr_info("Init IRQ for node %d\n", node);
- nodep = nlm_get_node(node);
- nodep->irqmask = PERCPU_IRQ_MASK;
- for (i = PIC_IRT_FIRST_IRQ; i <= PIC_IRT_LAST_IRQ; i++) {
- irt = nlm_irq_to_irt(i);
- if (irt == -1) /* unused irq */
- continue;
- nodep->irqmask |= 1ull << i;
- if (irt == -2) /* not a direct PIC irq */
- continue;
-
- nlm_pic_init_irt(nodep->picbase, irt, i,
- node * nlm_threads_per_node(), 0);
- nlm_setup_pic_irq(node, i, i, irt);
- }
-}
-
-void nlm_smp_irq_init(int hwtid)
-{
- int cpu, node;
-
- cpu = hwtid % nlm_threads_per_node();
- node = hwtid / nlm_threads_per_node();
-
- if (cpu == 0 && node != 0)
- nlm_init_node_irqs(node);
- write_c0_eimr(nlm_get_node(node)->irqmask);
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
- uint64_t eirr;
- int i, node;
-
- node = nlm_nodeid();
- eirr = read_c0_eirr_and_eimr();
- if (eirr == 0)
- return;
-
- i = __ffs64(eirr);
- /* per-CPU IRQs don't need translation */
- if (i < PIC_IRQ_BASE) {
- do_IRQ(i);
- return;
- }
-
-#if defined(CONFIG_PCI_MSI) && defined(CONFIG_CPU_XLP)
- /* PCI interrupts need a second level dispatch for MSI bits */
- if (i >= PIC_PCIE_LINK_MSI_IRQ(0) && i <= PIC_PCIE_LINK_MSI_IRQ(3)) {
- nlm_dispatch_msi(node, i);
- return;
- }
- if (i >= PIC_PCIE_MSIX_IRQ(0) && i <= PIC_PCIE_MSIX_IRQ(3)) {
- nlm_dispatch_msix(node, i);
- return;
- }
-
-#endif
- /* top level irq handling */
- do_IRQ(nlm_irq_to_xirq(node, i));
-}
-
-#ifdef CONFIG_CPU_XLP
-static int __init xlp_of_pic_init(struct device_node *node,
- struct device_node *parent)
-{
- const int n_picirqs = PIC_IRT_LAST_IRQ - PIC_IRQ_BASE + 1;
- struct irq_domain *xlp_pic_domain;
- struct resource res;
- int socid, ret, bus;
-
- /* we need a hack to get the PIC's SoC chip id */
- ret = of_address_to_resource(node, 0, &res);
- if (ret < 0) {
- pr_err("PIC %pOFn: reg property not found!\n", node);
- return -EINVAL;
- }
-
- if (cpu_is_xlp9xx()) {
- bus = (res.start >> 20) & 0xf;
- for (socid = 0; socid < NLM_NR_NODES; socid++) {
- if (!nlm_node_present(socid))
- continue;
- if (nlm_get_node(socid)->socbus == bus)
- break;
- }
- if (socid == NLM_NR_NODES) {
- pr_err("PIC %pOFn: Node mapping for bus %d not found!\n",
- node, bus);
- return -EINVAL;
- }
- } else {
- socid = (res.start >> 18) & 0x3;
- if (!nlm_node_present(socid)) {
- pr_err("PIC %pOFn: node %d does not exist!\n",
- node, socid);
- return -EINVAL;
- }
- }
-
- if (!nlm_node_present(socid)) {
- pr_err("PIC %pOFn: node %d does not exist!\n", node, socid);
- return -EINVAL;
- }
-
- xlp_pic_domain = irq_domain_add_legacy(node, n_picirqs,
- nlm_irq_to_xirq(socid, PIC_IRQ_BASE), PIC_IRQ_BASE,
- &irq_domain_simple_ops, NULL);
- if (xlp_pic_domain == NULL) {
- pr_err("PIC %pOFn: Creating legacy domain failed!\n", node);
- return -EINVAL;
- }
- pr_info("Node %d: IRQ domain created for PIC@%pR\n", socid, &res);
- return 0;
-}
-
-static struct of_device_id __initdata xlp_pic_irq_ids[] = {
- { .compatible = "netlogic,xlp-pic", .data = xlp_of_pic_init },
- {},
-};
-#endif
-
-void __init arch_init_irq(void)
-{
- /* Initialize the irq descriptors */
- nlm_init_percpu_irqs();
- nlm_init_node_irqs(0);
- write_c0_eimr(nlm_current_node()->irqmask);
-#if defined(CONFIG_CPU_XLR)
- nlm_setup_fmn_irq();
-#endif
-#ifdef CONFIG_CPU_XLP
- of_irq_init(xlp_pic_irq_ids);
-#endif
-}
diff --git a/arch/mips/netlogic/common/reset.S b/arch/mips/netlogic/common/reset.S
deleted file mode 100644
index c474981a6c0d..000000000000
--- a/arch/mips/netlogic/common/reset.S
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * Copyright 2003-2013 Broadcom Corporation.
- * All Rights Reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the Broadcom
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-
-#include <asm/asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/cpu.h>
-#include <asm/cacheops.h>
-#include <asm/regdef.h>
-#include <asm/mipsregs.h>
-#include <asm/stackframe.h>
-#include <asm/asmmacro.h>
-#include <asm/addrspace.h>
-
-#include <asm/netlogic/common.h>
-
-#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/xlp-hal/sys.h>
-#include <asm/netlogic/xlp-hal/cpucontrol.h>
-
-#define SYS_CPU_COHERENT_BASE CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \
- XLP_IO_SYS_OFFSET(0) + XLP_IO_PCI_HDRSZ + \
- SYS_CPU_NONCOHERENT_MODE * 4
-
-/* Enable XLP features and workarounds in the LSU */
-.macro xlp_config_lsu
- li t0, LSU_DEFEATURE
- mfcr t1, t0
-
- lui t2, 0x4080 /* Enable Unaligned Access, L2HPE */
- or t1, t1, t2
- mtcr t1, t0
-
- li t0, ICU_DEFEATURE
- mfcr t1, t0
- ori t1, 0x1000 /* Enable Icache partitioning */
- mtcr t1, t0
-
- li t0, SCHED_DEFEATURE
- lui t1, 0x0100 /* Disable BRU accepting ALU ops */
- mtcr t1, t0
-.endm
-
-/*
- * Allow access to physical mem >64G by enabling ELPA in PAGEGRAIN
- * register. This is needed before going to C code since the SP can
- * in this region. Called from all HW threads.
- */
-.macro xlp_early_mmu_init
- mfc0 t0, CP0_PAGEMASK, 1
- li t1, (1 << 29) /* ELPA bit */
- or t0, t1
- mtc0 t0, CP0_PAGEMASK, 1
-.endm
-
-/*
- * L1D cache has to be flushed before enabling threads in XLP.
- * On XLP8xx/XLP3xx, we do a low level flush using processor control
- * registers. On XLPII CPUs, usual cache instructions work.
- */
-.macro xlp_flush_l1_dcache
- mfc0 t0, CP0_PRID
- andi t0, t0, PRID_IMP_MASK
- slt t1, t0, 0x1200
- beqz t1, 15f
- nop
-
- /* XLP8xx low level cache flush */
- li t0, LSU_DEBUG_DATA0
- li t1, LSU_DEBUG_ADDR
- li t2, 0 /* index */
- li t3, 0x1000 /* loop count */
-11:
- sll v0, t2, 5
- mtcr zero, t0
- ori v1, v0, 0x3 /* way0 | write_enable | write_active */
- mtcr v1, t1
-12:
- mfcr v1, t1
- andi v1, 0x1 /* wait for write_active == 0 */
- bnez v1, 12b
- nop
- mtcr zero, t0
- ori v1, v0, 0x7 /* way1 | write_enable | write_active */
- mtcr v1, t1
-13:
- mfcr v1, t1
- andi v1, 0x1 /* wait for write_active == 0 */
- bnez v1, 13b
- nop
- addi t2, 1
- bne t3, t2, 11b
- nop
- b 17f
- nop
-
- /* XLPII CPUs, Invalidate all 64k of L1 D-cache */
-15:
- li t0, 0x80000000
- li t1, 0x80010000
-16: cache Index_Writeback_Inv_D, 0(t0)
- addiu t0, t0, 32
- bne t0, t1, 16b
- nop
-17:
-.endm
-
-/*
- * nlm_reset_entry will be copied to the reset entry point for
- * XLR and XLP. The XLP cores start here when they are woken up. This
- * is also the NMI entry point.
- *
- * We use scratch reg 6/7 to save k0/k1 and check for NMI first.
- *
- * The data corresponding to reset/NMI is stored at RESET_DATA_PHYS
- * location, this will have the thread mask (used when core is woken up)
- * and the current NMI handler in case we reached here for an NMI.
- *
- * When a core or thread is newly woken up, it marks itself ready and
- * loops in a 'wait'. When the CPU really needs waking up, we send an NMI
- * IPI to it, with the NMI handler set to prom_boot_secondary_cpus
- */
- .set noreorder
- .set noat
- .set arch=xlr /* for mfcr/mtcr, XLR is sufficient */
-
-FEXPORT(nlm_reset_entry)
- dmtc0 k0, $22, 6
- dmtc0 k1, $22, 7
- mfc0 k0, CP0_STATUS
- li k1, 0x80000
- and k1, k0, k1
- beqz k1, 1f /* go to real reset entry */
- nop
- li k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */
- ld k0, BOOT_NMI_HANDLER(k1)
- jr k0
- nop
-
-1: /* Entry point on core wakeup */
- mfc0 t0, CP0_PRID /* processor ID */
- andi t0, PRID_IMP_MASK
- li t1, 0x1500 /* XLP 9xx */
- beq t0, t1, 2f /* does not need to set coherent */
- nop
-
- li t1, 0x1300 /* XLP 5xx */
- beq t0, t1, 2f /* does not need to set coherent */
- nop
-
- /* set bit in SYS coherent register for the core */
- mfc0 t0, CP0_EBASE
- mfc0 t1, CP0_EBASE
- srl t1, 5
- andi t1, 0x3 /* t1 <- node */
- li t2, 0x40000
- mul t3, t2, t1 /* t3 = node * 0x40000 */
- srl t0, t0, 2
- and t0, t0, 0x7 /* t0 <- core */
- li t1, 0x1
- sll t0, t1, t0
- nor t0, t0, zero /* t0 <- ~(1 << core) */
- li t2, SYS_CPU_COHERENT_BASE
- add t2, t2, t3 /* t2 <- SYS offset for node */
- lw t1, 0(t2)
- and t1, t1, t0
- sw t1, 0(t2)
-
- /* read back to ensure complete */
- lw t1, 0(t2)
- sync
-
-2:
- /* Configure LSU on Non-0 Cores. */
- xlp_config_lsu
- /* FALL THROUGH */
-
-/*
- * Wake up sibling threads from the initial thread in a core.
- */
-EXPORT(nlm_boot_siblings)
- /* core L1D flush before enable threads */
- xlp_flush_l1_dcache
- /* save ra and sp, will be used later (only for boot cpu) */
- dmtc0 ra, $22, 6
- dmtc0 sp, $22, 7
- /* Enable hw threads by writing to MAP_THREADMODE of the core */
- li t0, CKSEG1ADDR(RESET_DATA_PHYS)
- lw t1, BOOT_THREAD_MODE(t0) /* t1 <- thread mode */
- li t0, ((CPU_BLOCKID_MAP << 8) | MAP_THREADMODE)
- mfcr t2, t0
- or t2, t2, t1
- mtcr t2, t0
-
- /*
- * The new hardware thread starts at the next instruction
- * For all the cases other than core 0 thread 0, we will
- * jump to the secondary wait function.
-
- * NOTE: All GPR contents are lost after the mtcr above!
- */
- mfc0 v0, CP0_EBASE
- andi v0, 0x3ff /* v0 <- node/core */
-
- /*
- * Errata: to avoid potential live lock, setup IFU_BRUB_RESERVE
- * when running 4 threads per core
- */
- andi v1, v0, 0x3 /* v1 <- thread id */
- bnez v1, 2f
- nop
-
- /* thread 0 of each core. */
- li t0, CKSEG1ADDR(RESET_DATA_PHYS)
- lw t1, BOOT_THREAD_MODE(t0) /* t1 <- thread mode */
- subu t1, 0x3 /* 4-thread per core mode? */
- bnez t1, 2f
- nop
-
- li t0, IFU_BRUB_RESERVE
- li t1, 0x55
- mtcr t1, t0
- _ehb
-2:
- beqz v0, 4f /* boot cpu (cpuid == 0)? */
- nop
-
- /* setup status reg */
- move t1, zero
-#ifdef CONFIG_64BIT
- ori t1, ST0_KX
-#endif
- mtc0 t1, CP0_STATUS
-
- xlp_early_mmu_init
-
- /* mark CPU ready */
- li t3, CKSEG1ADDR(RESET_DATA_PHYS)
- ADDIU t1, t3, BOOT_CPU_READY
- sll v1, v0, 2
- PTR_ADDU t1, v1
- li t2, 1
- sw t2, 0(t1)
- /* Wait until NMI hits */
-3: wait
- b 3b
- nop
-
- /*
- * For the boot CPU, we have to restore ra and sp and return, rest
- * of the registers will be restored by the caller
- */
-4:
- dmfc0 ra, $22, 6
- dmfc0 sp, $22, 7
- jr ra
- nop
-EXPORT(nlm_reset_entry_end)
-
-LEAF(nlm_init_boot_cpu)
-#ifdef CONFIG_CPU_XLP
- xlp_config_lsu
- xlp_early_mmu_init
-#endif
- jr ra
- nop
-END(nlm_init_boot_cpu)
diff --git a/arch/mips/netlogic/common/smp.c b/arch/mips/netlogic/common/smp.c
deleted file mode 100644
index 39a300bd6cc2..000000000000
--- a/arch/mips/netlogic/common/smp.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/sched/task_stack.h>
-#include <linux/smp.h>
-#include <linux/irq.h>
-
-#include <asm/mmu_context.h>
-
-#include <asm/netlogic/interrupt.h>
-#include <asm/netlogic/mips-extns.h>
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/common.h>
-
-#if defined(CONFIG_CPU_XLP)
-#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/xlp-hal/pic.h>
-#elif defined(CONFIG_CPU_XLR)
-#include <asm/netlogic/xlr/iomap.h>
-#include <asm/netlogic/xlr/pic.h>
-#include <asm/netlogic/xlr/xlr.h>
-#else
-#error "Unknown CPU"
-#endif
-
-void nlm_send_ipi_single(int logical_cpu, unsigned int action)
-{
- unsigned int hwtid;
- uint64_t picbase;
-
- /* node id is part of hwtid, and needed for send_ipi */
- hwtid = cpu_logical_map(logical_cpu);
- picbase = nlm_get_node(nlm_hwtid_to_node(hwtid))->picbase;
-
- if (action & SMP_CALL_FUNCTION)
- nlm_pic_send_ipi(picbase, hwtid, IRQ_IPI_SMP_FUNCTION, 0);
- if (action & SMP_RESCHEDULE_YOURSELF)
- nlm_pic_send_ipi(picbase, hwtid, IRQ_IPI_SMP_RESCHEDULE, 0);
-}
-
-void nlm_send_ipi_mask(const struct cpumask *mask, unsigned int action)
-{
- int cpu;
-
- for_each_cpu(cpu, mask) {
- nlm_send_ipi_single(cpu, action);
- }
-}
-
-/* IRQ_IPI_SMP_FUNCTION Handler */
-void nlm_smp_function_ipi_handler(struct irq_desc *desc)
-{
- unsigned int irq = irq_desc_get_irq(desc);
- clear_c0_eimr(irq);
- ack_c0_eirr(irq);
- generic_smp_call_function_interrupt();
- set_c0_eimr(irq);
-}
-
-/* IRQ_IPI_SMP_RESCHEDULE handler */
-void nlm_smp_resched_ipi_handler(struct irq_desc *desc)
-{
- unsigned int irq = irq_desc_get_irq(desc);
- clear_c0_eimr(irq);
- ack_c0_eirr(irq);
- scheduler_ipi();
- set_c0_eimr(irq);
-}
-
-/*
- * Called before going into mips code, early cpu init
- */
-void nlm_early_init_secondary(int cpu)
-{
- change_c0_config(CONF_CM_CMASK, 0x3);
-#ifdef CONFIG_CPU_XLP
- xlp_mmu_init();
-#endif
- write_c0_ebase(nlm_current_node()->ebase);
-}
-
-/*
- * Code to run on secondary just after probing the CPU
- */
-static void nlm_init_secondary(void)
-{
- int hwtid;
-
- hwtid = hard_smp_processor_id();
- cpu_set_core(¤t_cpu_data, hwtid / NLM_THREADS_PER_CORE);
- current_cpu_data.package = nlm_nodeid();
- nlm_percpu_init(hwtid);
- nlm_smp_irq_init(hwtid);
-}
-
-void nlm_prepare_cpus(unsigned int max_cpus)
-{
- /* declare we are SMT capable */
- smp_num_siblings = nlm_threads_per_core;
-}
-
-void nlm_smp_finish(void)
-{
- local_irq_enable();
-}
-
-/*
- * Boot all other cpus in the system, initialize them, and bring them into
- * the boot function
- */
-unsigned long nlm_next_gp;
-unsigned long nlm_next_sp;
-static cpumask_t phys_cpu_present_mask;
-
-int nlm_boot_secondary(int logical_cpu, struct task_struct *idle)
-{
- uint64_t picbase;
- int hwtid;
-
- hwtid = cpu_logical_map(logical_cpu);
- picbase = nlm_get_node(nlm_hwtid_to_node(hwtid))->picbase;
-
- nlm_next_sp = (unsigned long)__KSTK_TOS(idle);
- nlm_next_gp = (unsigned long)task_thread_info(idle);
-
- /* barrier for sp/gp store above */
- __sync();
- nlm_pic_send_ipi(picbase, hwtid, 1, 1); /* NMI */
-
- return 0;
-}
-
-void __init nlm_smp_setup(void)
-{
- unsigned int boot_cpu;
- int num_cpus, i, ncore, node;
- volatile u32 *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY);
-
- boot_cpu = hard_smp_processor_id();
- cpumask_clear(&phys_cpu_present_mask);
-
- cpumask_set_cpu(boot_cpu, &phys_cpu_present_mask);
- __cpu_number_map[boot_cpu] = 0;
- __cpu_logical_map[0] = boot_cpu;
- set_cpu_possible(0, true);
-
- num_cpus = 1;
- for (i = 0; i < NR_CPUS; i++) {
- /*
- * cpu_ready array is not set for the boot_cpu,
- * it is only set for ASPs (see smpboot.S)
- */
- if (cpu_ready[i]) {
- cpumask_set_cpu(i, &phys_cpu_present_mask);
- __cpu_number_map[i] = num_cpus;
- __cpu_logical_map[num_cpus] = i;
- set_cpu_possible(num_cpus, true);
- node = nlm_hwtid_to_node(i);
- cpumask_set_cpu(num_cpus, &nlm_get_node(node)->cpumask);
- ++num_cpus;
- }
- }
-
- pr_info("Physical CPU mask: %*pb\n",
- cpumask_pr_args(&phys_cpu_present_mask));
- pr_info("Possible CPU mask: %*pb\n",
- cpumask_pr_args(cpu_possible_mask));
-
- /* check with the cores we have woken up */
- for (ncore = 0, i = 0; i < NLM_NR_NODES; i++)
- ncore += hweight32(nlm_get_node(i)->coremask);
-
- pr_info("Detected (%dc%dt) %d Slave CPU(s)\n", ncore,
- nlm_threads_per_core, num_cpus);
-
- /* switch NMI handler to boot CPUs */
- nlm_set_nmi_handler(nlm_boot_secondary_cpus);
-}
-
-static int nlm_parse_cpumask(cpumask_t *wakeup_mask)
-{
- uint32_t core0_thr_mask, core_thr_mask;
- int threadmode, i, j;
-
- core0_thr_mask = 0;
- for (i = 0; i < NLM_THREADS_PER_CORE; i++)
- if (cpumask_test_cpu(i, wakeup_mask))
- core0_thr_mask |= (1 << i);
- switch (core0_thr_mask) {
- case 1:
- nlm_threads_per_core = 1;
- threadmode = 0;
- break;
- case 3:
- nlm_threads_per_core = 2;
- threadmode = 2;
- break;
- case 0xf:
- nlm_threads_per_core = 4;
- threadmode = 3;
- break;
- default:
- goto unsupp;
- }
-
- /* Verify other cores CPU masks */
- for (i = 0; i < NR_CPUS; i += NLM_THREADS_PER_CORE) {
- core_thr_mask = 0;
- for (j = 0; j < NLM_THREADS_PER_CORE; j++)
- if (cpumask_test_cpu(i + j, wakeup_mask))
- core_thr_mask |= (1 << j);
- if (core_thr_mask != 0 && core_thr_mask != core0_thr_mask)
- goto unsupp;
- }
- return threadmode;
-
-unsupp:
- panic("Unsupported CPU mask %*pb", cpumask_pr_args(wakeup_mask));
- return 0;
-}
-
-int nlm_wakeup_secondary_cpus(void)
-{
- u32 *reset_data;
- int threadmode;
-
- /* verify the mask and setup core config variables */
- threadmode = nlm_parse_cpumask(&nlm_cpumask);
-
- /* Setup CPU init parameters */
- reset_data = nlm_get_boot_data(BOOT_THREAD_MODE);
- *reset_data = threadmode;
-
-#ifdef CONFIG_CPU_XLP
- xlp_wakeup_secondary_cpus();
-#else
- xlr_wakeup_secondary_cpus();
-#endif
- return 0;
-}
-
-const struct plat_smp_ops nlm_smp_ops = {
- .send_ipi_single = nlm_send_ipi_single,
- .send_ipi_mask = nlm_send_ipi_mask,
- .init_secondary = nlm_init_secondary,
- .smp_finish = nlm_smp_finish,
- .boot_secondary = nlm_boot_secondary,
- .smp_setup = nlm_smp_setup,
- .prepare_cpus = nlm_prepare_cpus,
-};
diff --git a/arch/mips/netlogic/common/smpboot.S b/arch/mips/netlogic/common/smpboot.S
deleted file mode 100644
index 509c1a7e7c05..000000000000
--- a/arch/mips/netlogic/common/smpboot.S
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-
-#include <asm/asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/regdef.h>
-#include <asm/mipsregs.h>
-#include <asm/stackframe.h>
-#include <asm/asmmacro.h>
-#include <asm/addrspace.h>
-
-#include <asm/netlogic/common.h>
-
-#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/xlp-hal/sys.h>
-#include <asm/netlogic/xlp-hal/cpucontrol.h>
-
- .set noreorder
- .set noat
- .set arch=xlr /* for mfcr/mtcr, XLR is sufficient */
-
-/* Called by the boot cpu to wake up its sibling threads */
-NESTED(xlp_boot_core0_siblings, PT_SIZE, sp)
- /* CPU register contents lost when enabling threads, save them first */
- SAVE_ALL
- sync
- /* find the location to which nlm_boot_siblings was relocated */
- li t0, CKSEG1ADDR(RESET_VEC_PHYS)
- PTR_LA t1, nlm_reset_entry
- PTR_LA t2, nlm_boot_siblings
- dsubu t2, t1
- daddu t2, t0
- /* call it */
- jalr t2
- nop
- RESTORE_ALL
- jr ra
- nop
-END(xlp_boot_core0_siblings)
-
-NESTED(nlm_boot_secondary_cpus, 16, sp)
- /* Initialize CP0 Status */
- move t1, zero
-#ifdef CONFIG_64BIT
- ori t1, ST0_KX
-#endif
- mtc0 t1, CP0_STATUS
- PTR_LA t1, nlm_next_sp
- PTR_L sp, 0(t1)
- PTR_LA t1, nlm_next_gp
- PTR_L gp, 0(t1)
-
- /* a0 has the processor id */
- mfc0 a0, CP0_EBASE
- andi a0, 0x3ff /* a0 <- node/core */
- PTR_LA t0, nlm_early_init_secondary
- jalr t0
- nop
-
- PTR_LA t0, smp_bootstrap
- jr t0
- nop
-END(nlm_boot_secondary_cpus)
-
-/*
- * In case of RMIboot bootloader which is used on XLR boards, the CPUs
- * be already woken up and waiting in bootloader code.
- * This will get them out of the bootloader code and into linux. Needed
- * because the bootloader area will be taken and initialized by linux.
- */
-NESTED(nlm_rmiboot_preboot, 16, sp)
- mfc0 t0, $15, 1 /* read ebase */
- andi t0, 0x1f /* t0 has the processor_id() */
- andi t2, t0, 0x3 /* thread num */
- sll t0, 2 /* offset in cpu array */
-
- li t3, CKSEG1ADDR(RESET_DATA_PHYS)
- ADDIU t1, t3, BOOT_CPU_READY
- ADDU t1, t0
- li t3, 1
- sw t3, 0(t1)
-
- bnez t2, 1f /* skip thread programming */
- nop /* for thread id != 0 */
-
- /*
- * XLR MMU setup only for first thread in core
- */
- li t0, 0x400
- mfcr t1, t0
- li t2, 6 /* XLR thread mode mask */
- nor t3, t2, zero
- and t2, t1, t2 /* t2 - current thread mode */
- li v0, CKSEG1ADDR(RESET_DATA_PHYS)
- lw v1, BOOT_THREAD_MODE(v0) /* v1 - new thread mode */
- sll v1, 1
- beq v1, t2, 1f /* same as request value */
- nop /* nothing to do */
-
- and t2, t1, t3 /* mask out old thread mode */
- or t1, t2, v1 /* put in new value */
- mtcr t1, t0 /* update core control */
-
- /* wait for NMI to hit */
-1: wait
- b 1b
- nop
-END(nlm_rmiboot_preboot)
diff --git a/arch/mips/netlogic/common/time.c b/arch/mips/netlogic/common/time.c
deleted file mode 100644
index cbbf0d48216b..000000000000
--- a/arch/mips/netlogic/common/time.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/init.h>
-
-#include <asm/time.h>
-#include <asm/cpu-features.h>
-
-#include <asm/netlogic/interrupt.h>
-#include <asm/netlogic/common.h>
-#include <asm/netlogic/haldefs.h>
-
-#if defined(CONFIG_CPU_XLP)
-#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/xlp-hal/sys.h>
-#include <asm/netlogic/xlp-hal/pic.h>
-#elif defined(CONFIG_CPU_XLR)
-#include <asm/netlogic/xlr/iomap.h>
-#include <asm/netlogic/xlr/pic.h>
-#include <asm/netlogic/xlr/xlr.h>
-#else
-#error "Unknown CPU"
-#endif
-
-unsigned int get_c0_compare_int(void)
-{
- return IRQ_TIMER;
-}
-
-static u64 nlm_get_pic_timer(struct clocksource *cs)
-{
- uint64_t picbase = nlm_get_node(0)->picbase;
-
- return ~nlm_pic_read_timer(picbase, PIC_CLOCK_TIMER);
-}
-
-static u64 nlm_get_pic_timer32(struct clocksource *cs)
-{
- uint64_t picbase = nlm_get_node(0)->picbase;
-
- return ~nlm_pic_read_timer32(picbase, PIC_CLOCK_TIMER);
-}
-
-static struct clocksource csrc_pic = {
- .name = "PIC",
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static void nlm_init_pic_timer(void)
-{
- uint64_t picbase = nlm_get_node(0)->picbase;
- u32 picfreq;
-
- nlm_pic_set_timer(picbase, PIC_CLOCK_TIMER, ~0ULL, 0, 0);
- if (current_cpu_data.cputype == CPU_XLR) {
- csrc_pic.mask = CLOCKSOURCE_MASK(32);
- csrc_pic.read = nlm_get_pic_timer32;
- } else {
- csrc_pic.mask = CLOCKSOURCE_MASK(64);
- csrc_pic.read = nlm_get_pic_timer;
- }
- csrc_pic.rating = 1000;
- picfreq = pic_timer_freq();
- clocksource_register_hz(&csrc_pic, picfreq);
- pr_info("PIC clock source added, frequency %d\n", picfreq);
-}
-
-void __init plat_time_init(void)
-{
- nlm_init_pic_timer();
- mips_hpt_frequency = nlm_get_cpu_frequency();
- if (current_cpu_type() == CPU_XLR)
- preset_lpj = mips_hpt_frequency / (3 * HZ);
- else
- preset_lpj = mips_hpt_frequency / (2 * HZ);
- pr_info("MIPS counter frequency [%ld]\n",
- (unsigned long)mips_hpt_frequency);
-}
diff --git a/arch/mips/netlogic/xlp/Makefile b/arch/mips/netlogic/xlp/Makefile
deleted file mode 100644
index d62465717393..000000000000
--- a/arch/mips/netlogic/xlp/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y += setup.o nlm_hal.o cop2-ex.o dt.o
-obj-$(CONFIG_SMP) += wakeup.o
-ifdef CONFIG_USB
-obj-y += usb-init.o
-obj-y += usb-init-xlp2.o
-endif
-ifdef CONFIG_SATA_AHCI
-obj-y += ahci-init.o
-obj-y += ahci-init-xlp2.o
-endif
diff --git a/arch/mips/netlogic/xlp/ahci-init-xlp2.c b/arch/mips/netlogic/xlp/ahci-init-xlp2.c
deleted file mode 100644
index c11b9c7dc7c8..000000000000
--- a/arch/mips/netlogic/xlp/ahci-init-xlp2.c
+++ /dev/null
@@ -1,390 +0,0 @@
-/*
- * Copyright (c) 2003-2014 Broadcom Corporation
- * All Rights Reserved
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the Broadcom
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/bitops.h>
-#include <linux/pci_ids.h>
-#include <linux/nodemask.h>
-
-#include <asm/cpu.h>
-#include <asm/mipsregs.h>
-
-#include <asm/netlogic/common.h>
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/mips-extns.h>
-#include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/xlp-hal/iomap.h>
-
-#define SATA_CTL 0x0
-#define SATA_STATUS 0x1 /* Status Reg */
-#define SATA_INT 0x2 /* Interrupt Reg */
-#define SATA_INT_MASK 0x3 /* Interrupt Mask Reg */
-#define SATA_BIU_TIMEOUT 0x4
-#define AXIWRSPERRLOG 0x5
-#define AXIRDSPERRLOG 0x6
-#define BiuTimeoutLow 0x7
-#define BiuTimeoutHi 0x8
-#define BiuSlvErLow 0x9
-#define BiuSlvErHi 0xa
-#define IO_CONFIG_SWAP_DIS 0xb
-#define CR_REG_TIMER 0xc
-#define CORE_ID 0xd
-#define AXI_SLAVE_OPT1 0xe
-#define PHY_MEM_ACCESS 0xf
-#define PHY0_CNTRL 0x10
-#define PHY0_STAT 0x11
-#define PHY0_RX_ALIGN 0x12
-#define PHY0_RX_EQ_LO 0x13
-#define PHY0_RX_EQ_HI 0x14
-#define PHY0_BIST_LOOP 0x15
-#define PHY1_CNTRL 0x16
-#define PHY1_STAT 0x17
-#define PHY1_RX_ALIGN 0x18
-#define PHY1_RX_EQ_LO 0x19
-#define PHY1_RX_EQ_HI 0x1a
-#define PHY1_BIST_LOOP 0x1b
-#define RdExBase 0x1c
-#define RdExLimit 0x1d
-#define CacheAllocBase 0x1e
-#define CacheAllocLimit 0x1f
-#define BiuSlaveCmdGstNum 0x20
-
-/*SATA_CTL Bits */
-#define SATA_RST_N BIT(0) /* Active low reset sata_core phy */
-#define SataCtlReserve0 BIT(1)
-#define M_CSYSREQ BIT(2) /* AXI master low power, not used */
-#define S_CSYSREQ BIT(3) /* AXI slave low power, not used */
-#define P0_CP_DET BIT(8) /* Reserved, bring in from pad */
-#define P0_MP_SW BIT(9) /* Mech Switch */
-#define P0_DISABLE BIT(10) /* disable p0 */
-#define P0_ACT_LED_EN BIT(11) /* Active LED enable */
-#define P0_IRST_HARD_SYNTH BIT(12) /* PHY hard synth reset */
-#define P0_IRST_HARD_TXRX BIT(13) /* PHY lane hard reset */
-#define P0_IRST_POR BIT(14) /* PHY power on reset*/
-#define P0_IPDTXL BIT(15) /* PHY Tx lane dis/power down */
-#define P0_IPDRXL BIT(16) /* PHY Rx lane dis/power down */
-#define P0_IPDIPDMSYNTH BIT(17) /* PHY synthesizer dis/porwer down */
-#define P0_CP_POD_EN BIT(18) /* CP_POD enable */
-#define P0_AT_BYPASS BIT(19) /* P0 address translation by pass */
-#define P1_CP_DET BIT(20) /* Reserved,Cold Detect */
-#define P1_MP_SW BIT(21) /* Mech Switch */
-#define P1_DISABLE BIT(22) /* disable p1 */
-#define P1_ACT_LED_EN BIT(23) /* Active LED enable */
-#define P1_IRST_HARD_SYNTH BIT(24) /* PHY hard synth reset */
-#define P1_IRST_HARD_TXRX BIT(25) /* PHY lane hard reset */
-#define P1_IRST_POR BIT(26) /* PHY power on reset*/
-#define P1_IPDTXL BIT(27) /* PHY Tx lane dis/porwer down */
-#define P1_IPDRXL BIT(28) /* PHY Rx lane dis/porwer down */
-#define P1_IPDIPDMSYNTH BIT(29) /* PHY synthesizer dis/porwer down */
-#define P1_CP_POD_EN BIT(30)
-#define P1_AT_BYPASS BIT(31) /* P1 address translation by pass */
-
-/* Status register */
-#define M_CACTIVE BIT(0) /* m_cactive, not used */
-#define S_CACTIVE BIT(1) /* s_cactive, not used */
-#define P0_PHY_READY BIT(8) /* phy is ready */
-#define P0_CP_POD BIT(9) /* Cold PowerOn */
-#define P0_SLUMBER BIT(10) /* power mode slumber */
-#define P0_PATIAL BIT(11) /* power mode patial */
-#define P0_PHY_SIG_DET BIT(12) /* phy dignal detect */
-#define P0_PHY_CALI BIT(13) /* phy calibration done */
-#define P1_PHY_READY BIT(16) /* phy is ready */
-#define P1_CP_POD BIT(17) /* Cold PowerOn */
-#define P1_SLUMBER BIT(18) /* power mode slumber */
-#define P1_PATIAL BIT(19) /* power mode patial */
-#define P1_PHY_SIG_DET BIT(20) /* phy dignal detect */
-#define P1_PHY_CALI BIT(21) /* phy calibration done */
-
-/* SATA CR_REG_TIMER bits */
-#define CR_TIME_SCALE (0x1000 << 0)
-
-/* SATA PHY specific registers start and end address */
-#define RXCDRCALFOSC0 0x0065
-#define CALDUTY 0x006e
-#define RXDPIF 0x8065
-#define PPMDRIFTMAX_HI 0x80A4
-
-#define nlm_read_sata_reg(b, r) nlm_read_reg(b, r)
-#define nlm_write_sata_reg(b, r, v) nlm_write_reg(b, r, v)
-#define nlm_get_sata_pcibase(node) \
- nlm_pcicfg_base(XLP9XX_IO_SATA_OFFSET(node))
-#define nlm_get_sata_regbase(node) \
- (nlm_get_sata_pcibase(node) + 0x100)
-
-/* SATA PHY config for register block 1 0x0065 .. 0x006e */
-static const u8 sata_phy_config1[] = {
- 0xC9, 0xC9, 0x07, 0x07, 0x18, 0x18, 0x01, 0x01, 0x22, 0x00
-};
-
-/* SATA PHY config for register block 2 0x8065 .. 0x80A4 */
-static const u8 sata_phy_config2[] = {
- 0xAA, 0x00, 0x4C, 0xC9, 0xC9, 0x07, 0x07, 0x18,
- 0x18, 0x05, 0x0C, 0x10, 0x00, 0x10, 0x00, 0xFF,
- 0xCF, 0xF7, 0xE1, 0xF5, 0xFD, 0xFD, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xE3, 0xE7, 0xDB, 0xF5, 0xFD, 0xFD,
- 0xF5, 0xF5, 0xFF, 0xFF, 0xE3, 0xE7, 0xDB, 0xF5,
- 0xFD, 0xFD, 0xF5, 0xF5, 0xFF, 0xFF, 0xFF, 0xF5,
- 0x3F, 0x00, 0x32, 0x00, 0x03, 0x01, 0x05, 0x05,
- 0x04, 0x00, 0x00, 0x08, 0x04, 0x00, 0x00, 0x04,
-};
-
-const int sata_phy_debug = 0; /* set to verify PHY writes */
-
-static void sata_clear_glue_reg(u64 regbase, u32 off, u32 bit)
-{
- u32 reg_val;
-
- reg_val = nlm_read_sata_reg(regbase, off);
- nlm_write_sata_reg(regbase, off, (reg_val & ~bit));
-}
-
-static void sata_set_glue_reg(u64 regbase, u32 off, u32 bit)
-{
- u32 reg_val;
-
- reg_val = nlm_read_sata_reg(regbase, off);
- nlm_write_sata_reg(regbase, off, (reg_val | bit));
-}
-
-static void write_phy_reg(u64 regbase, u32 addr, u32 physel, u8 data)
-{
- nlm_write_sata_reg(regbase, PHY_MEM_ACCESS,
- (1u << 31) | (physel << 24) | (data << 16) | addr);
- udelay(850);
-}
-
-static u8 read_phy_reg(u64 regbase, u32 addr, u32 physel)
-{
- u32 val;
-
- nlm_write_sata_reg(regbase, PHY_MEM_ACCESS,
- (0 << 31) | (physel << 24) | (0 << 16) | addr);
- udelay(850);
- val = nlm_read_sata_reg(regbase, PHY_MEM_ACCESS);
- return (val >> 16) & 0xff;
-}
-
-static void config_sata_phy(u64 regbase)
-{
- u32 port, i, reg;
- u8 val;
-
- for (port = 0; port < 2; port++) {
- for (i = 0, reg = RXCDRCALFOSC0; reg <= CALDUTY; reg++, i++)
- write_phy_reg(regbase, reg, port, sata_phy_config1[i]);
-
- for (i = 0, reg = RXDPIF; reg <= PPMDRIFTMAX_HI; reg++, i++)
- write_phy_reg(regbase, reg, port, sata_phy_config2[i]);
-
- /* Fix for PHY link up failures at lower temperatures */
- write_phy_reg(regbase, 0x800F, port, 0x1f);
-
- val = read_phy_reg(regbase, 0x0029, port);
- write_phy_reg(regbase, 0x0029, port, val | (0x7 << 1));
-
- val = read_phy_reg(regbase, 0x0056, port);
- write_phy_reg(regbase, 0x0056, port, val & ~(1 << 3));
-
- val = read_phy_reg(regbase, 0x0018, port);
- write_phy_reg(regbase, 0x0018, port, val & ~(0x7 << 0));
- }
-}
-
-static void check_phy_register(u64 regbase, u32 addr, u32 physel, u8 xdata)
-{
- u8 data;
-
- data = read_phy_reg(regbase, addr, physel);
- pr_info("PHY read addr = 0x%x physel = %d data = 0x%x %s\n",
- addr, physel, data, data == xdata ? "TRUE" : "FALSE");
-}
-
-static void verify_sata_phy_config(u64 regbase)
-{
- u32 port, i, reg;
-
- for (port = 0; port < 2; port++) {
- for (i = 0, reg = RXCDRCALFOSC0; reg <= CALDUTY; reg++, i++)
- check_phy_register(regbase, reg, port,
- sata_phy_config1[i]);
-
- for (i = 0, reg = RXDPIF; reg <= PPMDRIFTMAX_HI; reg++, i++)
- check_phy_register(regbase, reg, port,
- sata_phy_config2[i]);
- }
-}
-
-static void nlm_sata_firmware_init(int node)
-{
- u32 reg_val;
- u64 regbase;
- int n;
-
- pr_info("Initializing XLP9XX On-chip AHCI...\n");
- regbase = nlm_get_sata_regbase(node);
-
- /* Reset port0 */
- sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_POR);
- sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_TXRX);
- sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_SYNTH);
- sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDTXL);
- sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDRXL);
- sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDIPDMSYNTH);
-
- /* port1 */
- sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_POR);
- sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_TXRX);
- sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_SYNTH);
- sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDTXL);
- sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDRXL);
- sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDIPDMSYNTH);
- udelay(300);
-
- /* Set PHY */
- sata_set_glue_reg(regbase, SATA_CTL, P0_IPDTXL);
- sata_set_glue_reg(regbase, SATA_CTL, P0_IPDRXL);
- sata_set_glue_reg(regbase, SATA_CTL, P0_IPDIPDMSYNTH);
- sata_set_glue_reg(regbase, SATA_CTL, P1_IPDTXL);
- sata_set_glue_reg(regbase, SATA_CTL, P1_IPDRXL);
- sata_set_glue_reg(regbase, SATA_CTL, P1_IPDIPDMSYNTH);
-
- udelay(1000);
- sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_POR);
- udelay(1000);
- sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_POR);
- udelay(1000);
-
- /* setup PHY */
- config_sata_phy(regbase);
- if (sata_phy_debug)
- verify_sata_phy_config(regbase);
-
- udelay(1000);
- sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_TXRX);
- sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_SYNTH);
- sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_TXRX);
- sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_SYNTH);
- udelay(300);
-
- /* Override reset in serial PHY mode */
- sata_set_glue_reg(regbase, CR_REG_TIMER, CR_TIME_SCALE);
- /* Set reset SATA */
- sata_set_glue_reg(regbase, SATA_CTL, SATA_RST_N);
- sata_set_glue_reg(regbase, SATA_CTL, M_CSYSREQ);
- sata_set_glue_reg(regbase, SATA_CTL, S_CSYSREQ);
-
- pr_debug("Waiting for PHYs to come up.\n");
- n = 10000;
- do {
- reg_val = nlm_read_sata_reg(regbase, SATA_STATUS);
- if ((reg_val & P1_PHY_READY) && (reg_val & P0_PHY_READY))
- break;
- udelay(10);
- } while (--n > 0);
-
- if (reg_val & P0_PHY_READY)
- pr_info("PHY0 is up.\n");
- else
- pr_info("PHY0 is down.\n");
- if (reg_val & P1_PHY_READY)
- pr_info("PHY1 is up.\n");
- else
- pr_info("PHY1 is down.\n");
-
- pr_info("XLP AHCI Init Done.\n");
-}
-
-static int __init nlm_ahci_init(void)
-{
- int node;
-
- if (!cpu_is_xlp9xx())
- return 0;
- for (node = 0; node < NLM_NR_NODES; node++)
- if (nlm_node_present(node))
- nlm_sata_firmware_init(node);
- return 0;
-}
-
-static void nlm_sata_intr_ack(struct irq_data *data)
-{
- u64 regbase;
- u32 val;
- int node;
-
- node = data->irq / NLM_IRQS_PER_NODE;
- regbase = nlm_get_sata_regbase(node);
- val = nlm_read_sata_reg(regbase, SATA_INT);
- sata_set_glue_reg(regbase, SATA_INT, val);
-}
-
-static void nlm_sata_fixup_bar(struct pci_dev *dev)
-{
- dev->resource[5] = dev->resource[0];
- memset(&dev->resource[0], 0, sizeof(dev->resource[0]));
-}
-
-static void nlm_sata_fixup_final(struct pci_dev *dev)
-{
- u32 val;
- u64 regbase;
- int node;
-
- /* Find end bridge function to find node */
- node = xlp_socdev_to_node(dev);
- regbase = nlm_get_sata_regbase(node);
-
- /* clear pending interrupts and then enable them */
- val = nlm_read_sata_reg(regbase, SATA_INT);
- sata_set_glue_reg(regbase, SATA_INT, val);
-
- /* Enable only the core interrupt */
- sata_set_glue_reg(regbase, SATA_INT_MASK, 0x1);
-
- dev->irq = nlm_irq_to_xirq(node, PIC_SATA_IRQ);
- nlm_set_pic_extra_ack(node, PIC_SATA_IRQ, nlm_sata_intr_ack);
-}
-
-arch_initcall(nlm_ahci_init);
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_SATA,
- nlm_sata_fixup_bar);
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_SATA,
- nlm_sata_fixup_final);
diff --git a/arch/mips/netlogic/xlp/ahci-init.c b/arch/mips/netlogic/xlp/ahci-init.c
deleted file mode 100644
index 92be1a3258b1..000000000000
--- a/arch/mips/netlogic/xlp/ahci-init.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright (c) 2003-2014 Broadcom Corporation
- * All Rights Reserved
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the Broadcom
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/bitops.h>
-
-#include <asm/cpu.h>
-#include <asm/mipsregs.h>
-
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/common.h>
-#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/mips-extns.h>
-
-#define SATA_CTL 0x0
-#define SATA_STATUS 0x1 /* Status Reg */
-#define SATA_INT 0x2 /* Interrupt Reg */
-#define SATA_INT_MASK 0x3 /* Interrupt Mask Reg */
-#define SATA_CR_REG_TIMER 0x4 /* PHY Conrol Timer Reg */
-#define SATA_CORE_ID 0x5 /* Core ID Reg */
-#define SATA_AXI_SLAVE_OPT1 0x6 /* AXI Slave Options Reg */
-#define SATA_PHY_LOS_LEV 0x7 /* PHY LOS Level Reg */
-#define SATA_PHY_MULTI 0x8 /* PHY Multiplier Reg */
-#define SATA_PHY_CLK_SEL 0x9 /* Clock Select Reg */
-#define SATA_PHY_AMP1_GEN1 0xa /* PHY Transmit Amplitude Reg 1 */
-#define SATA_PHY_AMP1_GEN2 0xb /* PHY Transmit Amplitude Reg 2 */
-#define SATA_PHY_AMP1_GEN3 0xc /* PHY Transmit Amplitude Reg 3 */
-#define SATA_PHY_PRE1 0xd /* PHY Transmit Preemphasis Reg 1 */
-#define SATA_PHY_PRE2 0xe /* PHY Transmit Preemphasis Reg 2 */
-#define SATA_PHY_PRE3 0xf /* PHY Transmit Preemphasis Reg 3 */
-#define SATA_SPDMODE 0x10 /* Speed Mode Reg */
-#define SATA_REFCLK 0x11 /* Reference Clock Control Reg */
-#define SATA_BYTE_SWAP_DIS 0x12 /* byte swap disable */
-
-/*SATA_CTL Bits */
-#define SATA_RST_N BIT(0)
-#define PHY0_RESET_N BIT(16)
-#define PHY1_RESET_N BIT(17)
-#define PHY2_RESET_N BIT(18)
-#define PHY3_RESET_N BIT(19)
-#define M_CSYSREQ BIT(2)
-#define S_CSYSREQ BIT(3)
-
-/*SATA_STATUS Bits */
-#define P0_PHY_READY BIT(4)
-#define P1_PHY_READY BIT(5)
-#define P2_PHY_READY BIT(6)
-#define P3_PHY_READY BIT(7)
-
-#define nlm_read_sata_reg(b, r) nlm_read_reg(b, r)
-#define nlm_write_sata_reg(b, r, v) nlm_write_reg(b, r, v)
-#define nlm_get_sata_pcibase(node) \
- nlm_pcicfg_base(XLP_IO_SATA_OFFSET(node))
-/* SATA device specific configuration registers are starts at 0x900 offset */
-#define nlm_get_sata_regbase(node) \
- (nlm_get_sata_pcibase(node) + 0x900)
-
-static void sata_clear_glue_reg(uint64_t regbase, uint32_t off, uint32_t bit)
-{
- uint32_t reg_val;
-
- reg_val = nlm_read_sata_reg(regbase, off);
- nlm_write_sata_reg(regbase, off, (reg_val & ~bit));
-}
-
-static void sata_set_glue_reg(uint64_t regbase, uint32_t off, uint32_t bit)
-{
- uint32_t reg_val;
-
- reg_val = nlm_read_sata_reg(regbase, off);
- nlm_write_sata_reg(regbase, off, (reg_val | bit));
-}
-
-static void nlm_sata_firmware_init(int node)
-{
- uint32_t reg_val;
- uint64_t regbase;
- int i;
-
- pr_info("XLP AHCI Initialization started.\n");
- regbase = nlm_get_sata_regbase(node);
-
- /* Reset SATA */
- sata_clear_glue_reg(regbase, SATA_CTL, SATA_RST_N);
- /* Reset PHY */
- sata_clear_glue_reg(regbase, SATA_CTL,
- (PHY3_RESET_N | PHY2_RESET_N
- | PHY1_RESET_N | PHY0_RESET_N));
-
- /* Set SATA */
- sata_set_glue_reg(regbase, SATA_CTL, SATA_RST_N);
- /* Set PHY */
- sata_set_glue_reg(regbase, SATA_CTL,
- (PHY3_RESET_N | PHY2_RESET_N
- | PHY1_RESET_N | PHY0_RESET_N));
-
- pr_debug("Waiting for PHYs to come up.\n");
- i = 0;
- do {
- reg_val = nlm_read_sata_reg(regbase, SATA_STATUS);
- i++;
- } while (((reg_val & 0xF0) != 0xF0) && (i < 10000));
-
- for (i = 0; i < 4; i++) {
- if (reg_val & (P0_PHY_READY << i))
- pr_info("PHY%d is up.\n", i);
- else
- pr_info("PHY%d is down.\n", i);
- }
-
- pr_info("XLP AHCI init done.\n");
-}
-
-static int __init nlm_ahci_init(void)
-{
- int node = 0;
- int chip = read_c0_prid() & PRID_IMP_MASK;
-
- if (chip == PRID_IMP_NETLOGIC_XLP3XX)
- nlm_sata_firmware_init(node);
- return 0;
-}
-
-static void nlm_sata_intr_ack(struct irq_data *data)
-{
- uint32_t val = 0;
- uint64_t regbase;
-
- regbase = nlm_get_sata_regbase(nlm_nodeid());
- val = nlm_read_sata_reg(regbase, SATA_INT);
- sata_set_glue_reg(regbase, SATA_INT, val);
-}
-
-static void nlm_sata_fixup_bar(struct pci_dev *dev)
-{
- /*
- * The AHCI resource is in BAR 0, move it to
- * BAR 5, where it is expected
- */
- dev->resource[5] = dev->resource[0];
- memset(&dev->resource[0], 0, sizeof(dev->resource[0]));
-}
-
-static void nlm_sata_fixup_final(struct pci_dev *dev)
-{
- uint32_t val;
- uint64_t regbase;
- int node = 0; /* XLP3XX does not support multi-node */
-
- regbase = nlm_get_sata_regbase(node);
-
- /* clear pending interrupts and then enable them */
- val = nlm_read_sata_reg(regbase, SATA_INT);
- sata_set_glue_reg(regbase, SATA_INT, val);
-
- /* Mask the core interrupt. If all the interrupts
- * are enabled there are spurious interrupt flow
- * happening, to avoid only enable core interrupt
- * mask.
- */
- sata_set_glue_reg(regbase, SATA_INT_MASK, 0x1);
-
- dev->irq = PIC_SATA_IRQ;
- nlm_set_pic_extra_ack(node, PIC_SATA_IRQ, nlm_sata_intr_ack);
-}
-
-arch_initcall(nlm_ahci_init);
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_SATA,
- nlm_sata_fixup_bar);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_SATA,
- nlm_sata_fixup_final);
diff --git a/arch/mips/netlogic/xlp/cop2-ex.c b/arch/mips/netlogic/xlp/cop2-ex.c
deleted file mode 100644
index 21e439b3db70..000000000000
--- a/arch/mips/netlogic/xlp/cop2-ex.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2013 Broadcom Corporation.
- *
- * based on arch/mips/cavium-octeon/cpu.c
- * Copyright (C) 2009 Wind River Systems,
- * written by Ralf Baechle <ralf@linux-mips.org>
- */
-#include <linux/capability.h>
-#include <linux/init.h>
-#include <linux/irqflags.h>
-#include <linux/notifier.h>
-#include <linux/prefetch.h>
-#include <linux/ptrace.h>
-#include <linux/sched.h>
-#include <linux/sched/task_stack.h>
-
-#include <asm/cop2.h>
-#include <asm/current.h>
-#include <asm/mipsregs.h>
-#include <asm/page.h>
-
-#include <asm/netlogic/mips-extns.h>
-
-/*
- * 64 bit ops are done in inline assembly to support 32 bit
- * compilation
- */
-void nlm_cop2_save(struct nlm_cop2_state *r)
-{
- asm volatile(
- ".set push\n"
- ".set noat\n"
- "dmfc2 $1, $0, 0\n"
- "sd $1, 0(%1)\n"
- "dmfc2 $1, $0, 1\n"
- "sd $1, 8(%1)\n"
- "dmfc2 $1, $0, 2\n"
- "sd $1, 16(%1)\n"
- "dmfc2 $1, $0, 3\n"
- "sd $1, 24(%1)\n"
- "dmfc2 $1, $1, 0\n"
- "sd $1, 0(%2)\n"
- "dmfc2 $1, $1, 1\n"
- "sd $1, 8(%2)\n"
- "dmfc2 $1, $1, 2\n"
- "sd $1, 16(%2)\n"
- "dmfc2 $1, $1, 3\n"
- "sd $1, 24(%2)\n"
- ".set pop\n"
- : "=m"(*r)
- : "r"(r->tx), "r"(r->rx));
-
- r->tx_msg_status = __read_32bit_c2_register($2, 0);
- r->rx_msg_status = __read_32bit_c2_register($3, 0) & 0x0fffffff;
-}
-
-void nlm_cop2_restore(struct nlm_cop2_state *r)
-{
- u32 rstat;
-
- asm volatile(
- ".set push\n"
- ".set noat\n"
- "ld $1, 0(%1)\n"
- "dmtc2 $1, $0, 0\n"
- "ld $1, 8(%1)\n"
- "dmtc2 $1, $0, 1\n"
- "ld $1, 16(%1)\n"
- "dmtc2 $1, $0, 2\n"
- "ld $1, 24(%1)\n"
- "dmtc2 $1, $0, 3\n"
- "ld $1, 0(%2)\n"
- "dmtc2 $1, $1, 0\n"
- "ld $1, 8(%2)\n"
- "dmtc2 $1, $1, 1\n"
- "ld $1, 16(%2)\n"
- "dmtc2 $1, $1, 2\n"
- "ld $1, 24(%2)\n"
- "dmtc2 $1, $1, 3\n"
- ".set pop\n"
- : : "m"(*r), "r"(r->tx), "r"(r->rx));
-
- __write_32bit_c2_register($2, 0, r->tx_msg_status);
- rstat = __read_32bit_c2_register($3, 0) & 0xf0000000u;
- __write_32bit_c2_register($3, 0, r->rx_msg_status | rstat);
-}
-
-static int nlm_cu2_call(struct notifier_block *nfb, unsigned long action,
- void *data)
-{
- unsigned long flags;
- unsigned int status;
-
- switch (action) {
- case CU2_EXCEPTION:
- if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
- break;
- local_irq_save(flags);
- KSTK_STATUS(current) |= ST0_CU2;
- status = read_c0_status();
- write_c0_status(status | ST0_CU2);
- nlm_cop2_restore(&(current->thread.cp2));
- write_c0_status(status & ~ST0_CU2);
- local_irq_restore(flags);
- pr_info("COP2 access enabled for pid %d (%s)\n",
- current->pid, current->comm);
- return NOTIFY_BAD; /* Don't call default notifier */
- }
-
- return NOTIFY_OK; /* Let default notifier send signals */
-}
-
-static int __init nlm_cu2_setup(void)
-{
- return cu2_notifier(nlm_cu2_call, 0);
-}
-early_initcall(nlm_cu2_setup);
diff --git a/arch/mips/netlogic/xlp/dt.c b/arch/mips/netlogic/xlp/dt.c
deleted file mode 100644
index c856f2a3ea42..000000000000
--- a/arch/mips/netlogic/xlp/dt.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright 2003-2013 Broadcom Corporation.
- * All Rights Reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the Broadcom
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/kernel.h>
-#include <linux/memblock.h>
-
-#include <linux/of_fdt.h>
-#include <linux/of_platform.h>
-#include <linux/of_device.h>
-
-#include <asm/prom.h>
-
-extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[], __dtb_xlp_fvp_begin[],
- __dtb_xlp_gvp_begin[], __dtb_xlp_rvp_begin[];
-static void *xlp_fdt_blob;
-
-void __init *xlp_dt_init(void *fdtp)
-{
- if (!fdtp) {
- switch (current_cpu_data.processor_id & PRID_IMP_MASK) {
-#ifdef CONFIG_DT_XLP_RVP
- case PRID_IMP_NETLOGIC_XLP5XX:
- fdtp = __dtb_xlp_rvp_begin;
- break;
-#endif
-#ifdef CONFIG_DT_XLP_GVP
- case PRID_IMP_NETLOGIC_XLP9XX:
- fdtp = __dtb_xlp_gvp_begin;
- break;
-#endif
-#ifdef CONFIG_DT_XLP_FVP
- case PRID_IMP_NETLOGIC_XLP2XX:
- fdtp = __dtb_xlp_fvp_begin;
- break;
-#endif
-#ifdef CONFIG_DT_XLP_SVP
- case PRID_IMP_NETLOGIC_XLP3XX:
- fdtp = __dtb_xlp_svp_begin;
- break;
-#endif
-#ifdef CONFIG_DT_XLP_EVP
- case PRID_IMP_NETLOGIC_XLP8XX:
- fdtp = __dtb_xlp_evp_begin;
- break;
-#endif
- default:
- /* Pick a built-in if any, and hope for the best */
- fdtp = __dtb_start;
- break;
- }
- }
- xlp_fdt_blob = fdtp;
- return fdtp;
-}
-
-void __init xlp_early_init_devtree(void)
-{
- __dt_setup_arch(xlp_fdt_blob);
-}
-
-void __init device_tree_init(void)
-{
- unflatten_and_copy_device_tree();
-}
diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c
deleted file mode 100644
index 25ee69489e5e..000000000000
--- a/arch/mips/netlogic/xlp/nlm_hal.c
+++ /dev/null
@@ -1,508 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-
-#include <asm/mipsregs.h>
-#include <asm/time.h>
-
-#include <asm/netlogic/common.h>
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/xlp-hal/bridge.h>
-#include <asm/netlogic/xlp-hal/pic.h>
-#include <asm/netlogic/xlp-hal/sys.h>
-
-/* Main initialization */
-void nlm_node_init(int node)
-{
- struct nlm_soc_info *nodep;
-
- nodep = nlm_get_node(node);
- if (node == 0)
- nodep->coremask = 1; /* node 0, boot cpu */
- nodep->sysbase = nlm_get_sys_regbase(node);
- nodep->picbase = nlm_get_pic_regbase(node);
- nodep->ebase = read_c0_ebase() & MIPS_EBASE_BASE;
- if (cpu_is_xlp9xx())
- nodep->socbus = xlp9xx_get_socbus(node);
- else
- nodep->socbus = 0;
- spin_lock_init(&nodep->piclock);
-}
-
-static int xlp9xx_irq_to_irt(int irq)
-{
- switch (irq) {
- case PIC_GPIO_IRQ:
- return 12;
- case PIC_I2C_0_IRQ:
- return 125;
- case PIC_I2C_1_IRQ:
- return 126;
- case PIC_I2C_2_IRQ:
- return 127;
- case PIC_I2C_3_IRQ:
- return 128;
- case PIC_9XX_XHCI_0_IRQ:
- return 114;
- case PIC_9XX_XHCI_1_IRQ:
- return 115;
- case PIC_9XX_XHCI_2_IRQ:
- return 116;
- case PIC_UART_0_IRQ:
- return 133;
- case PIC_UART_1_IRQ:
- return 134;
- case PIC_SATA_IRQ:
- return 143;
- case PIC_NAND_IRQ:
- return 151;
- case PIC_SPI_IRQ:
- return 152;
- case PIC_MMC_IRQ:
- return 153;
- case PIC_PCIE_LINK_LEGACY_IRQ(0):
- case PIC_PCIE_LINK_LEGACY_IRQ(1):
- case PIC_PCIE_LINK_LEGACY_IRQ(2):
- case PIC_PCIE_LINK_LEGACY_IRQ(3):
- return 191 + irq - PIC_PCIE_LINK_LEGACY_IRQ_BASE;
- }
- return -1;
-}
-
-static int xlp_irq_to_irt(int irq)
-{
- uint64_t pcibase;
- int devoff, irt;
-
- devoff = 0;
- switch (irq) {
- case PIC_UART_0_IRQ:
- devoff = XLP_IO_UART0_OFFSET(0);
- break;
- case PIC_UART_1_IRQ:
- devoff = XLP_IO_UART1_OFFSET(0);
- break;
- case PIC_MMC_IRQ:
- devoff = XLP_IO_MMC_OFFSET(0);
- break;
- case PIC_I2C_0_IRQ: /* I2C will be fixed up */
- case PIC_I2C_1_IRQ:
- case PIC_I2C_2_IRQ:
- case PIC_I2C_3_IRQ:
- if (cpu_is_xlpii())
- devoff = XLP2XX_IO_I2C_OFFSET(0);
- else
- devoff = XLP_IO_I2C0_OFFSET(0);
- break;
- case PIC_SATA_IRQ:
- devoff = XLP_IO_SATA_OFFSET(0);
- break;
- case PIC_GPIO_IRQ:
- devoff = XLP_IO_GPIO_OFFSET(0);
- break;
- case PIC_NAND_IRQ:
- devoff = XLP_IO_NAND_OFFSET(0);
- break;
- case PIC_SPI_IRQ:
- devoff = XLP_IO_SPI_OFFSET(0);
- break;
- default:
- if (cpu_is_xlpii()) {
- switch (irq) {
- /* XLP2XX has three XHCI USB controller */
- case PIC_2XX_XHCI_0_IRQ:
- devoff = XLP2XX_IO_USB_XHCI0_OFFSET(0);
- break;
- case PIC_2XX_XHCI_1_IRQ:
- devoff = XLP2XX_IO_USB_XHCI1_OFFSET(0);
- break;
- case PIC_2XX_XHCI_2_IRQ:
- devoff = XLP2XX_IO_USB_XHCI2_OFFSET(0);
- break;
- }
- } else {
- switch (irq) {
- case PIC_EHCI_0_IRQ:
- devoff = XLP_IO_USB_EHCI0_OFFSET(0);
- break;
- case PIC_EHCI_1_IRQ:
- devoff = XLP_IO_USB_EHCI1_OFFSET(0);
- break;
- case PIC_OHCI_0_IRQ:
- devoff = XLP_IO_USB_OHCI0_OFFSET(0);
- break;
- case PIC_OHCI_1_IRQ:
- devoff = XLP_IO_USB_OHCI1_OFFSET(0);
- break;
- case PIC_OHCI_2_IRQ:
- devoff = XLP_IO_USB_OHCI2_OFFSET(0);
- break;
- case PIC_OHCI_3_IRQ:
- devoff = XLP_IO_USB_OHCI3_OFFSET(0);
- break;
- }
- }
- }
-
- if (devoff != 0) {
- uint32_t val;
-
- pcibase = nlm_pcicfg_base(devoff);
- val = nlm_read_reg(pcibase, XLP_PCI_IRTINFO_REG);
- if (val == 0xffffffff) {
- irt = -1;
- } else {
- irt = val & 0xffff;
- /* HW weirdness, I2C IRT entry has to be fixed up */
- switch (irq) {
- case PIC_I2C_1_IRQ:
- irt = irt + 1; break;
- case PIC_I2C_2_IRQ:
- irt = irt + 2; break;
- case PIC_I2C_3_IRQ:
- irt = irt + 3; break;
- }
- }
- } else if (irq >= PIC_PCIE_LINK_LEGACY_IRQ(0) &&
- irq <= PIC_PCIE_LINK_LEGACY_IRQ(3)) {
- /* HW bug, PCI IRT entries are bad on early silicon, fix */
- irt = PIC_IRT_PCIE_LINK_INDEX(irq -
- PIC_PCIE_LINK_LEGACY_IRQ_BASE);
- } else {
- irt = -1;
- }
- return irt;
-}
-
-int nlm_irq_to_irt(int irq)
-{
- /* return -2 for irqs without 1-1 mapping */
- if (irq >= PIC_PCIE_LINK_MSI_IRQ(0) && irq <= PIC_PCIE_LINK_MSI_IRQ(3))
- return -2;
- if (irq >= PIC_PCIE_MSIX_IRQ(0) && irq <= PIC_PCIE_MSIX_IRQ(3))
- return -2;
-
- if (cpu_is_xlp9xx())
- return xlp9xx_irq_to_irt(irq);
- else
- return xlp_irq_to_irt(irq);
-}
-
-static unsigned int nlm_xlp2_get_core_frequency(int node, int core)
-{
- unsigned int pll_post_div, ctrl_val0, ctrl_val1, denom;
- uint64_t num, sysbase, clockbase;
-
- if (cpu_is_xlp9xx()) {
- clockbase = nlm_get_clock_regbase(node);
- ctrl_val0 = nlm_read_sys_reg(clockbase,
- SYS_9XX_CPU_PLL_CTRL0(core));
- ctrl_val1 = nlm_read_sys_reg(clockbase,
- SYS_9XX_CPU_PLL_CTRL1(core));
- } else {
- sysbase = nlm_get_node(node)->sysbase;
- ctrl_val0 = nlm_read_sys_reg(sysbase,
- SYS_CPU_PLL_CTRL0(core));
- ctrl_val1 = nlm_read_sys_reg(sysbase,
- SYS_CPU_PLL_CTRL1(core));
- }
-
- /* Find PLL post divider value */
- switch ((ctrl_val0 >> 24) & 0x7) {
- case 1:
- pll_post_div = 2;
- break;
- case 3:
- pll_post_div = 4;
- break;
- case 7:
- pll_post_div = 8;
- break;
- case 6:
- pll_post_div = 16;
- break;
- case 0:
- default:
- pll_post_div = 1;
- break;
- }
-
- num = 1000000ULL * (400 * 3 + 100 * (ctrl_val1 & 0x3f));
- denom = 3 * pll_post_div;
- do_div(num, denom);
-
- return (unsigned int)num;
-}
-
-static unsigned int nlm_xlp_get_core_frequency(int node, int core)
-{
- unsigned int pll_divf, pll_divr, dfs_div, ext_div;
- unsigned int rstval, dfsval, denom;
- uint64_t num, sysbase;
-
- sysbase = nlm_get_node(node)->sysbase;
- rstval = nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG);
- dfsval = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIV_VALUE);
- pll_divf = ((rstval >> 10) & 0x7f) + 1;
- pll_divr = ((rstval >> 8) & 0x3) + 1;
- ext_div = ((rstval >> 30) & 0x3) + 1;
- dfs_div = ((dfsval >> (core * 4)) & 0xf) + 1;
-
- num = 800000000ULL * pll_divf;
- denom = 3 * pll_divr * ext_div * dfs_div;
- do_div(num, denom);
-
- return (unsigned int)num;
-}
-
-unsigned int nlm_get_core_frequency(int node, int core)
-{
- if (cpu_is_xlpii())
- return nlm_xlp2_get_core_frequency(node, core);
- else
- return nlm_xlp_get_core_frequency(node, core);
-}
-
-/*
- * Calculate PIC frequency from PLL registers.
- * freq_out = (ref_freq/2 * (6 + ctrl2[7:0]) + ctrl2[20:8]/2^13) /
- * ((2^ctrl0[7:5]) * Table(ctrl0[26:24]))
- */
-static unsigned int nlm_xlp2_get_pic_frequency(int node)
-{
- u32 ctrl_val0, ctrl_val2, vco_post_div, pll_post_div, cpu_xlp9xx;
- u32 mdiv, fdiv, pll_out_freq_den, reg_select, ref_div, pic_div;
- u64 sysbase, pll_out_freq_num, ref_clk_select, clockbase, ref_clk;
-
- sysbase = nlm_get_node(node)->sysbase;
- clockbase = nlm_get_clock_regbase(node);
- cpu_xlp9xx = cpu_is_xlp9xx();
-
- /* Find ref_clk_base */
- if (cpu_xlp9xx)
- ref_clk_select = (nlm_read_sys_reg(sysbase,
- SYS_9XX_POWER_ON_RESET_CFG) >> 18) & 0x3;
- else
- ref_clk_select = (nlm_read_sys_reg(sysbase,
- SYS_POWER_ON_RESET_CFG) >> 18) & 0x3;
- switch (ref_clk_select) {
- case 0:
- ref_clk = 200000000ULL;
- ref_div = 3;
- break;
- case 1:
- ref_clk = 100000000ULL;
- ref_div = 1;
- break;
- case 2:
- ref_clk = 125000000ULL;
- ref_div = 1;
- break;
- case 3:
- ref_clk = 400000000ULL;
- ref_div = 3;
- break;
- }
-
- /* Find the clock source PLL device for PIC */
- if (cpu_xlp9xx) {
- reg_select = nlm_read_sys_reg(clockbase,
- SYS_9XX_CLK_DEV_SEL_REG) & 0x3;
- switch (reg_select) {
- case 0:
- ctrl_val0 = nlm_read_sys_reg(clockbase,
- SYS_9XX_PLL_CTRL0);
- ctrl_val2 = nlm_read_sys_reg(clockbase,
- SYS_9XX_PLL_CTRL2);
- break;
- case 1:
- ctrl_val0 = nlm_read_sys_reg(clockbase,
- SYS_9XX_PLL_CTRL0_DEVX(0));
- ctrl_val2 = nlm_read_sys_reg(clockbase,
- SYS_9XX_PLL_CTRL2_DEVX(0));
- break;
- case 2:
- ctrl_val0 = nlm_read_sys_reg(clockbase,
- SYS_9XX_PLL_CTRL0_DEVX(1));
- ctrl_val2 = nlm_read_sys_reg(clockbase,
- SYS_9XX_PLL_CTRL2_DEVX(1));
- break;
- case 3:
- ctrl_val0 = nlm_read_sys_reg(clockbase,
- SYS_9XX_PLL_CTRL0_DEVX(2));
- ctrl_val2 = nlm_read_sys_reg(clockbase,
- SYS_9XX_PLL_CTRL2_DEVX(2));
- break;
- }
- } else {
- reg_select = (nlm_read_sys_reg(sysbase,
- SYS_CLK_DEV_SEL_REG) >> 22) & 0x3;
- switch (reg_select) {
- case 0:
- ctrl_val0 = nlm_read_sys_reg(sysbase,
- SYS_PLL_CTRL0);
- ctrl_val2 = nlm_read_sys_reg(sysbase,
- SYS_PLL_CTRL2);
- break;
- case 1:
- ctrl_val0 = nlm_read_sys_reg(sysbase,
- SYS_PLL_CTRL0_DEVX(0));
- ctrl_val2 = nlm_read_sys_reg(sysbase,
- SYS_PLL_CTRL2_DEVX(0));
- break;
- case 2:
- ctrl_val0 = nlm_read_sys_reg(sysbase,
- SYS_PLL_CTRL0_DEVX(1));
- ctrl_val2 = nlm_read_sys_reg(sysbase,
- SYS_PLL_CTRL2_DEVX(1));
- break;
- case 3:
- ctrl_val0 = nlm_read_sys_reg(sysbase,
- SYS_PLL_CTRL0_DEVX(2));
- ctrl_val2 = nlm_read_sys_reg(sysbase,
- SYS_PLL_CTRL2_DEVX(2));
- break;
- }
- }
-
- vco_post_div = (ctrl_val0 >> 5) & 0x7;
- pll_post_div = (ctrl_val0 >> 24) & 0x7;
- mdiv = ctrl_val2 & 0xff;
- fdiv = (ctrl_val2 >> 8) & 0x1fff;
-
- /* Find PLL post divider value */
- switch (pll_post_div) {
- case 1:
- pll_post_div = 2;
- break;
- case 3:
- pll_post_div = 4;
- break;
- case 7:
- pll_post_div = 8;
- break;
- case 6:
- pll_post_div = 16;
- break;
- case 0:
- default:
- pll_post_div = 1;
- break;
- }
-
- fdiv = fdiv/(1 << 13);
- pll_out_freq_num = ((ref_clk >> 1) * (6 + mdiv)) + fdiv;
- pll_out_freq_den = (1 << vco_post_div) * pll_post_div * ref_div;
-
- if (pll_out_freq_den > 0)
- do_div(pll_out_freq_num, pll_out_freq_den);
-
- /* PIC post divider, which happens after PLL */
- if (cpu_xlp9xx)
- pic_div = nlm_read_sys_reg(clockbase,
- SYS_9XX_CLK_DEV_DIV_REG) & 0x3;
- else
- pic_div = (nlm_read_sys_reg(sysbase,
- SYS_CLK_DEV_DIV_REG) >> 22) & 0x3;
- do_div(pll_out_freq_num, 1 << pic_div);
-
- return pll_out_freq_num;
-}
-
-unsigned int nlm_get_pic_frequency(int node)
-{
- if (cpu_is_xlpii())
- return nlm_xlp2_get_pic_frequency(node);
- else
- return 133333333;
-}
-
-unsigned int nlm_get_cpu_frequency(void)
-{
- return nlm_get_core_frequency(0, 0);
-}
-
-/*
- * Fills upto 8 pairs of entries containing the DRAM map of a node
- * if node < 0, get dram map for all nodes
- */
-int nlm_get_dram_map(int node, uint64_t *dram_map, int nentries)
-{
- uint64_t bridgebase, base, lim;
- uint32_t val;
- unsigned int barreg, limreg, xlatreg;
- int i, n, rv;
-
- /* Look only at mapping on Node 0, we don't handle crazy configs */
- bridgebase = nlm_get_bridge_regbase(0);
- rv = 0;
- for (i = 0; i < 8; i++) {
- if (rv + 1 >= nentries)
- break;
- if (cpu_is_xlp9xx()) {
- barreg = BRIDGE_9XX_DRAM_BAR(i);
- limreg = BRIDGE_9XX_DRAM_LIMIT(i);
- xlatreg = BRIDGE_9XX_DRAM_NODE_TRANSLN(i);
- } else {
- barreg = BRIDGE_DRAM_BAR(i);
- limreg = BRIDGE_DRAM_LIMIT(i);
- xlatreg = BRIDGE_DRAM_NODE_TRANSLN(i);
- }
- if (node >= 0) {
- /* node specified, get node mapping of BAR */
- val = nlm_read_bridge_reg(bridgebase, xlatreg);
- n = (val >> 1) & 0x3;
- if (n != node)
- continue;
- }
- val = nlm_read_bridge_reg(bridgebase, barreg);
- val = (val >> 12) & 0xfffff;
- base = (uint64_t) val << 20;
- val = nlm_read_bridge_reg(bridgebase, limreg);
- val = (val >> 12) & 0xfffff;
- if (val == 0) /* BAR not used */
- continue;
- lim = ((uint64_t)val + 1) << 20;
- dram_map[rv] = base;
- dram_map[rv + 1] = lim;
- rv += 2;
- }
- return rv;
-}
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
deleted file mode 100644
index 9fbaa1e5b340..000000000000
--- a/arch/mips/netlogic/xlp/setup.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/kernel.h>
-#include <linux/of_fdt.h>
-#include <linux/memblock.h>
-
-#include <asm/idle.h>
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/bootinfo.h>
-
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/common.h>
-
-#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/xlp-hal/sys.h>
-
-uint64_t nlm_io_base;
-struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
-cpumask_t nlm_cpumask = CPU_MASK_CPU0;
-unsigned int nlm_threads_per_core;
-
-static void nlm_linux_exit(void)
-{
- uint64_t sysbase = nlm_get_node(0)->sysbase;
-
- if (cpu_is_xlp9xx())
- nlm_write_sys_reg(sysbase, SYS_9XX_CHIP_RESET, 1);
- else
- nlm_write_sys_reg(sysbase, SYS_CHIP_RESET, 1);
- for ( ; ; )
- cpu_wait();
-}
-
-static void nlm_fixup_mem(void)
-{
- const int pref_backup = 512;
- struct memblock_region *mem;
-
- for_each_mem_region(mem) {
- memblock_remove(mem->base + mem->size - pref_backup,
- pref_backup);
- }
-}
-
-static void __init xlp_init_mem_from_bars(void)
-{
- uint64_t map[16];
- int i, n;
-
- n = nlm_get_dram_map(-1, map, ARRAY_SIZE(map)); /* -1 : all nodes */
- for (i = 0; i < n; i += 2) {
- /* exclude 0x1000_0000-0x2000_0000, u-boot device */
- if (map[i] <= 0x10000000 && map[i+1] > 0x10000000)
- map[i+1] = 0x10000000;
- if (map[i] > 0x10000000 && map[i] < 0x20000000)
- map[i] = 0x20000000;
-
- memblock_add(map[i], map[i+1] - map[i]);
- }
-}
-
-void __init plat_mem_setup(void)
-{
-#ifdef CONFIG_SMP
- nlm_wakeup_secondary_cpus();
-
- /* update TLB size after waking up threads */
- current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
-
- register_smp_ops(&nlm_smp_ops);
-#endif
- _machine_restart = (void (*)(char *))nlm_linux_exit;
- _machine_halt = nlm_linux_exit;
- pm_power_off = nlm_linux_exit;
-
- /* memory and bootargs from DT */
- xlp_early_init_devtree();
-
- if (memblock_end_of_DRAM() == 0) {
- pr_info("Using DRAM BARs for memory map.\n");
- xlp_init_mem_from_bars();
- }
- /* Calculate and setup wired entries for mapped kernel */
- nlm_fixup_mem();
-}
-
-const char *get_system_type(void)
-{
- switch (read_c0_prid() & PRID_IMP_MASK) {
- case PRID_IMP_NETLOGIC_XLP9XX:
- case PRID_IMP_NETLOGIC_XLP5XX:
- case PRID_IMP_NETLOGIC_XLP2XX:
- return "Broadcom XLPII Series";
- default:
- return "Netlogic XLP Series";
- }
-}
-
-void xlp_mmu_init(void)
-{
- u32 conf4;
-
- if (cpu_is_xlpii()) {
- /* XLPII series has extended pagesize in config 4 */
- conf4 = read_c0_config4() & ~0x1f00u;
- write_c0_config4(conf4 | ((PAGE_SHIFT - 10) / 2 << 8));
- } else {
- /* enable extended TLB and Large Fixed TLB */
- write_c0_config6(read_c0_config6() | 0x24);
-
- /* set page mask of extended Fixed TLB in config7 */
- write_c0_config7(PM_DEFAULT_MASK >>
- (13 + (ffz(PM_DEFAULT_MASK >> 13) / 2)));
- }
-}
-
-void nlm_percpu_init(int hwcpuid)
-{
-}
-
-void __init prom_init(void)
-{
- void *reset_vec;
-
- nlm_io_base = CKSEG1ADDR(XLP_DEFAULT_IO_BASE);
- nlm_init_boot_cpu();
- xlp_mmu_init();
- nlm_node_init(0);
- xlp_dt_init((void *)(long)fw_arg0);
-
- /* Update reset entry point with CPU init code */
- reset_vec = (void *)CKSEG1ADDR(RESET_VEC_PHYS);
- memset(reset_vec, 0, RESET_VEC_SIZE);
- memcpy(reset_vec, (void *)nlm_reset_entry,
- (nlm_reset_entry_end - nlm_reset_entry));
-
-#ifdef CONFIG_SMP
- cpumask_setall(&nlm_cpumask);
-#endif
-}
diff --git a/arch/mips/netlogic/xlp/usb-init-xlp2.c b/arch/mips/netlogic/xlp/usb-init-xlp2.c
deleted file mode 100644
index 2524939a5e3a..000000000000
--- a/arch/mips/netlogic/xlp/usb-init-xlp2.c
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- * Copyright (c) 2003-2013 Broadcom Corporation
- * All Rights Reserved
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the Broadcom
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-#include <asm/netlogic/common.h>
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/xlp-hal/xlp.h>
-
-#define XLPII_USB3_CTL_0 0xc0
-#define XLPII_VAUXRST BIT(0)
-#define XLPII_VCCRST BIT(1)
-#define XLPII_NUM2PORT 9
-#define XLPII_NUM3PORT 13
-#define XLPII_RTUNEREQ BIT(20)
-#define XLPII_MS_CSYSREQ BIT(21)
-#define XLPII_XS_CSYSREQ BIT(22)
-#define XLPII_RETENABLEN BIT(23)
-#define XLPII_TX2RX BIT(24)
-#define XLPII_XHCIREV BIT(25)
-#define XLPII_ECCDIS BIT(26)
-
-#define XLPII_USB3_INT_REG 0xc2
-#define XLPII_USB3_INT_MASK 0xc3
-
-#define XLPII_USB_PHY_TEST 0xc6
-#define XLPII_PRESET BIT(0)
-#define XLPII_ATERESET BIT(1)
-#define XLPII_LOOPEN BIT(2)
-#define XLPII_TESTPDHSP BIT(3)
-#define XLPII_TESTPDSSP BIT(4)
-#define XLPII_TESTBURNIN BIT(5)
-
-#define XLPII_USB_PHY_LOS_LV 0xc9
-#define XLPII_LOSLEV 0
-#define XLPII_LOSBIAS 5
-#define XLPII_SQRXTX 8
-#define XLPII_TXBOOST 11
-#define XLPII_RSLKSEL 16
-#define XLPII_FSEL 20
-
-#define XLPII_USB_RFCLK_REG 0xcc
-#define XLPII_VVLD 30
-
-#define nlm_read_usb_reg(b, r) nlm_read_reg(b, r)
-#define nlm_write_usb_reg(b, r, v) nlm_write_reg(b, r, v)
-
-#define nlm_xlpii_get_usb_pcibase(node, inst) \
- nlm_pcicfg_base(cpu_is_xlp9xx() ? \
- XLP9XX_IO_USB_OFFSET(node, inst) : \
- XLP2XX_IO_USB_OFFSET(node, inst))
-#define nlm_xlpii_get_usb_regbase(node, inst) \
- (nlm_xlpii_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
-
-static void xlp2xx_usb_ack(struct irq_data *data)
-{
- u64 port_addr;
-
- switch (data->irq) {
- case PIC_2XX_XHCI_0_IRQ:
- port_addr = nlm_xlpii_get_usb_regbase(0, 1);
- break;
- case PIC_2XX_XHCI_1_IRQ:
- port_addr = nlm_xlpii_get_usb_regbase(0, 2);
- break;
- case PIC_2XX_XHCI_2_IRQ:
- port_addr = nlm_xlpii_get_usb_regbase(0, 3);
- break;
- default:
- pr_err("No matching USB irq!\n");
- return;
- }
- nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
-}
-
-static void xlp9xx_usb_ack(struct irq_data *data)
-{
- u64 port_addr;
- int node, irq;
-
- /* Find the node and irq on the node */
- irq = data->irq % NLM_IRQS_PER_NODE;
- node = data->irq / NLM_IRQS_PER_NODE;
-
- switch (irq) {
- case PIC_9XX_XHCI_0_IRQ:
- port_addr = nlm_xlpii_get_usb_regbase(node, 1);
- break;
- case PIC_9XX_XHCI_1_IRQ:
- port_addr = nlm_xlpii_get_usb_regbase(node, 2);
- break;
- case PIC_9XX_XHCI_2_IRQ:
- port_addr = nlm_xlpii_get_usb_regbase(node, 3);
- break;
- default:
- pr_err("No matching USB irq %d node %d!\n", irq, node);
- return;
- }
- nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
-}
-
-static void nlm_xlpii_usb_hw_reset(int node, int port)
-{
- u64 port_addr, xhci_base, pci_base;
- void __iomem *corebase;
- u32 val;
-
- port_addr = nlm_xlpii_get_usb_regbase(node, port);
-
- /* Set frequency */
- val = nlm_read_usb_reg(port_addr, XLPII_USB_PHY_LOS_LV);
- val &= ~(0x3f << XLPII_FSEL);
- val |= (0x27 << XLPII_FSEL);
- nlm_write_usb_reg(port_addr, XLPII_USB_PHY_LOS_LV, val);
-
- val = nlm_read_usb_reg(port_addr, XLPII_USB_RFCLK_REG);
- val |= (1 << XLPII_VVLD);
- nlm_write_usb_reg(port_addr, XLPII_USB_RFCLK_REG, val);
-
- /* PHY reset */
- val = nlm_read_usb_reg(port_addr, XLPII_USB_PHY_TEST);
- val &= (XLPII_ATERESET | XLPII_LOOPEN | XLPII_TESTPDHSP
- | XLPII_TESTPDSSP | XLPII_TESTBURNIN);
- nlm_write_usb_reg(port_addr, XLPII_USB_PHY_TEST, val);
-
- /* Setup control register */
- val = XLPII_VAUXRST | XLPII_VCCRST | (1 << XLPII_NUM2PORT)
- | (1 << XLPII_NUM3PORT) | XLPII_MS_CSYSREQ | XLPII_XS_CSYSREQ
- | XLPII_RETENABLEN | XLPII_XHCIREV;
- nlm_write_usb_reg(port_addr, XLPII_USB3_CTL_0, val);
-
- /* Enable interrupts */
- nlm_write_usb_reg(port_addr, XLPII_USB3_INT_MASK, 0x00000001);
-
- /* Clear all interrupts */
- nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
-
- udelay(2000);
-
- /* XHCI configuration at PCI mem */
- pci_base = nlm_xlpii_get_usb_pcibase(node, port);
- xhci_base = nlm_read_usb_reg(pci_base, 0x4) & ~0xf;
- corebase = ioremap(xhci_base, 0x10000);
- if (!corebase)
- return;
-
- writel(0x240002, corebase + 0xc2c0);
- /* GCTL 0xc110 */
- val = readl(corebase + 0xc110);
- val &= ~(0x3 << 12);
- val |= (1 << 12);
- writel(val, corebase + 0xc110);
- udelay(100);
-
- /* PHYCFG 0xc200 */
- val = readl(corebase + 0xc200);
- val &= ~(1 << 6);
- writel(val, corebase + 0xc200);
- udelay(100);
-
- /* PIPECTL 0xc2c0 */
- val = readl(corebase + 0xc2c0);
- val &= ~(1 << 17);
- writel(val, corebase + 0xc2c0);
-
- iounmap(corebase);
-}
-
-static int __init nlm_platform_xlpii_usb_init(void)
-{
- int node;
-
- if (!cpu_is_xlpii())
- return 0;
-
- if (!cpu_is_xlp9xx()) {
- /* XLP 2XX single node */
- pr_info("Initializing 2XX USB Interface\n");
- nlm_xlpii_usb_hw_reset(0, 1);
- nlm_xlpii_usb_hw_reset(0, 2);
- nlm_xlpii_usb_hw_reset(0, 3);
- nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_0_IRQ, xlp2xx_usb_ack);
- nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_1_IRQ, xlp2xx_usb_ack);
- nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_2_IRQ, xlp2xx_usb_ack);
- return 0;
- }
-
- /* XLP 9XX, multi-node */
- pr_info("Initializing 9XX/5XX USB Interface\n");
- for (node = 0; node < NLM_NR_NODES; node++) {
- if (!nlm_node_present(node))
- continue;
- nlm_xlpii_usb_hw_reset(node, 1);
- nlm_xlpii_usb_hw_reset(node, 2);
- nlm_xlpii_usb_hw_reset(node, 3);
- nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_0_IRQ, xlp9xx_usb_ack);
- nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_1_IRQ, xlp9xx_usb_ack);
- nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_2_IRQ, xlp9xx_usb_ack);
- }
- return 0;
-}
-
-arch_initcall(nlm_platform_xlpii_usb_init);
-
-static u64 xlp_usb_dmamask = ~(u32)0;
-
-/* Fixup the IRQ for USB devices which is exist on XLP9XX SOC PCIE bus */
-static void nlm_xlp9xx_usb_fixup_final(struct pci_dev *dev)
-{
- int node;
-
- node = xlp_socdev_to_node(dev);
- dev->dev.dma_mask = &xlp_usb_dmamask;
- dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
- switch (dev->devfn) {
- case 0x21:
- dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_0_IRQ);
- break;
- case 0x22:
- dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_1_IRQ);
- break;
- case 0x23:
- dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_2_IRQ);
- break;
- }
-}
-
-/* Fixup the IRQ for USB devices which is exist on XLP2XX SOC PCIE bus */
-static void nlm_xlp2xx_usb_fixup_final(struct pci_dev *dev)
-{
- dev->dev.dma_mask = &xlp_usb_dmamask;
- dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
- switch (dev->devfn) {
- case 0x21:
- dev->irq = PIC_2XX_XHCI_0_IRQ;
- break;
- case 0x22:
- dev->irq = PIC_2XX_XHCI_1_IRQ;
- break;
- case 0x23:
- dev->irq = PIC_2XX_XHCI_2_IRQ;
- break;
- }
-}
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_XHCI,
- nlm_xlp9xx_usb_fixup_final);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_XHCI,
- nlm_xlp2xx_usb_fixup_final);
diff --git a/arch/mips/netlogic/xlp/usb-init.c b/arch/mips/netlogic/xlp/usb-init.c
deleted file mode 100644
index f8117985f0f8..000000000000
--- a/arch/mips/netlogic/xlp/usb-init.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Copyright (c) 2003-2012 Broadcom Corporation
- * All Rights Reserved
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the Broadcom
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/xlp-hal/xlp.h>
-
-/*
- * USB glue logic registers, used only during initialization
- */
-#define USB_CTL_0 0x01
-#define USB_PHY_0 0x0A
-#define USB_PHY_RESET 0x01
-#define USB_PHY_PORT_RESET_0 0x10
-#define USB_PHY_PORT_RESET_1 0x20
-#define USB_CONTROLLER_RESET 0x01
-#define USB_INT_STATUS 0x0E
-#define USB_INT_EN 0x0F
-#define USB_PHY_INTERRUPT_EN 0x01
-#define USB_OHCI_INTERRUPT_EN 0x02
-#define USB_OHCI_INTERRUPT1_EN 0x04
-#define USB_OHCI_INTERRUPT2_EN 0x08
-#define USB_CTRL_INTERRUPT_EN 0x10
-
-#define nlm_read_usb_reg(b, r) nlm_read_reg(b, r)
-#define nlm_write_usb_reg(b, r, v) nlm_write_reg(b, r, v)
-#define nlm_get_usb_pcibase(node, inst) \
- nlm_pcicfg_base(XLP_IO_USB_OFFSET(node, inst))
-#define nlm_get_usb_regbase(node, inst) \
- (nlm_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
-
-static void nlm_usb_intr_en(int node, int port)
-{
- uint32_t val;
- uint64_t port_addr;
-
- port_addr = nlm_get_usb_regbase(node, port);
- val = nlm_read_usb_reg(port_addr, USB_INT_EN);
- val = USB_CTRL_INTERRUPT_EN | USB_OHCI_INTERRUPT_EN |
- USB_OHCI_INTERRUPT1_EN | USB_OHCI_INTERRUPT2_EN;
- nlm_write_usb_reg(port_addr, USB_INT_EN, val);
-}
-
-static void nlm_usb_hw_reset(int node, int port)
-{
- uint64_t port_addr;
- uint32_t val;
-
- /* reset USB phy */
- port_addr = nlm_get_usb_regbase(node, port);
- val = nlm_read_usb_reg(port_addr, USB_PHY_0);
- val &= ~(USB_PHY_RESET | USB_PHY_PORT_RESET_0 | USB_PHY_PORT_RESET_1);
- nlm_write_usb_reg(port_addr, USB_PHY_0, val);
-
- mdelay(100);
- val = nlm_read_usb_reg(port_addr, USB_CTL_0);
- val &= ~(USB_CONTROLLER_RESET);
- val |= 0x4;
- nlm_write_usb_reg(port_addr, USB_CTL_0, val);
-}
-
-static int __init nlm_platform_usb_init(void)
-{
- if (cpu_is_xlpii())
- return 0;
-
- pr_info("Initializing USB Interface\n");
- nlm_usb_hw_reset(0, 0);
- nlm_usb_hw_reset(0, 3);
-
- /* Enable PHY interrupts */
- nlm_usb_intr_en(0, 0);
- nlm_usb_intr_en(0, 3);
-
- return 0;
-}
-
-arch_initcall(nlm_platform_usb_init);
-
-static u64 xlp_usb_dmamask = ~(u32)0;
-
-/* Fixup the IRQ for USB devices which is exist on XLP SOC PCIE bus */
-static void nlm_usb_fixup_final(struct pci_dev *dev)
-{
- dev->dev.dma_mask = &xlp_usb_dmamask;
- dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
- switch (dev->devfn) {
- case 0x10:
- dev->irq = PIC_EHCI_0_IRQ;
- break;
- case 0x11:
- dev->irq = PIC_OHCI_0_IRQ;
- break;
- case 0x12:
- dev->irq = PIC_OHCI_1_IRQ;
- break;
- case 0x13:
- dev->irq = PIC_EHCI_1_IRQ;
- break;
- case 0x14:
- dev->irq = PIC_OHCI_2_IRQ;
- break;
- case 0x15:
- dev->irq = PIC_OHCI_3_IRQ;
- break;
- }
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_EHCI,
- nlm_usb_fixup_final);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_OHCI,
- nlm_usb_fixup_final);
diff --git a/arch/mips/netlogic/xlp/wakeup.c b/arch/mips/netlogic/xlp/wakeup.c
deleted file mode 100644
index d61004dd71b4..000000000000
--- a/arch/mips/netlogic/xlp/wakeup.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/kernel.h>
-#include <linux/threads.h>
-
-#include <asm/asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/string.h>
-
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/common.h>
-#include <asm/netlogic/mips-extns.h>
-
-#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/xlp-hal/pic.h>
-#include <asm/netlogic/xlp-hal/sys.h>
-
-static int xlp_wakeup_core(uint64_t sysbase, int node, int core)
-{
- uint32_t coremask, value;
- int count, resetreg;
-
- coremask = (1 << core);
-
- /* Enable CPU clock in case of 8xx/3xx */
- if (!cpu_is_xlpii()) {
- value = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL);
- value &= ~coremask;
- nlm_write_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL, value);
- }
-
- /* On 9XX, mark coherent first */
- if (cpu_is_xlp9xx()) {
- value = nlm_read_sys_reg(sysbase, SYS_9XX_CPU_NONCOHERENT_MODE);
- value &= ~coremask;
- nlm_write_sys_reg(sysbase, SYS_9XX_CPU_NONCOHERENT_MODE, value);
- }
-
- /* Remove CPU Reset */
- resetreg = cpu_is_xlp9xx() ? SYS_9XX_CPU_RESET : SYS_CPU_RESET;
- value = nlm_read_sys_reg(sysbase, resetreg);
- value &= ~coremask;
- nlm_write_sys_reg(sysbase, resetreg, value);
-
- /* We are done on 9XX */
- if (cpu_is_xlp9xx())
- return 1;
-
- /* Poll for CPU to mark itself coherent on other type of XLP */
- count = 100000;
- do {
- value = nlm_read_sys_reg(sysbase, SYS_CPU_NONCOHERENT_MODE);
- } while ((value & coremask) != 0 && --count > 0);
-
- return count != 0;
-}
-
-static int wait_for_cpus(int cpu, int bootcpu)
-{
- volatile uint32_t *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY);
- int i, count, notready;
-
- count = 0x800000;
- do {
- notready = nlm_threads_per_core;
- for (i = 0; i < nlm_threads_per_core; i++)
- if (cpu_ready[cpu + i] || (cpu + i) == bootcpu)
- --notready;
- } while (notready != 0 && --count > 0);
-
- return count != 0;
-}
-
-static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
-{
- struct nlm_soc_info *nodep;
- uint64_t syspcibase, fusebase;
- uint32_t syscoremask, mask, fusemask;
- int core, n, cpu, ncores;
-
- for (n = 0; n < NLM_NR_NODES; n++) {
- if (n != 0) {
- /* check if node exists and is online */
- if (cpu_is_xlp9xx()) {
- int b = xlp9xx_get_socbus(n);
- pr_info("Node %d SoC PCI bus %d.\n", n, b);
- if (b == 0)
- break;
- } else {
- syspcibase = nlm_get_sys_pcibase(n);
- if (nlm_read_reg(syspcibase, 0) == 0xffffffff)
- break;
- }
- nlm_node_init(n);
- }
-
- /* read cores in reset from SYS */
- nodep = nlm_get_node(n);
-
- if (cpu_is_xlp9xx()) {
- fusebase = nlm_get_fuse_regbase(n);
- fusemask = nlm_read_reg(fusebase, FUSE_9XX_DEVCFG6);
- switch (read_c0_prid() & PRID_IMP_MASK) {
- case PRID_IMP_NETLOGIC_XLP5XX:
- mask = 0xff;
- break;
- case PRID_IMP_NETLOGIC_XLP9XX:
- default:
- mask = 0xfffff;
- break;
- }
- } else {
- fusemask = nlm_read_sys_reg(nodep->sysbase,
- SYS_EFUSE_DEVICE_CFG_STATUS0);
- switch (read_c0_prid() & PRID_IMP_MASK) {
- case PRID_IMP_NETLOGIC_XLP3XX:
- mask = 0xf;
- break;
- case PRID_IMP_NETLOGIC_XLP2XX:
- mask = 0x3;
- break;
- case PRID_IMP_NETLOGIC_XLP8XX:
- default:
- mask = 0xff;
- break;
- }
- }
-
- /*
- * Fused out cores are set in the fusemask, and the remaining
- * cores are renumbered to range 0 .. nactive-1
- */
- syscoremask = (1 << hweight32(~fusemask & mask)) - 1;
-
- pr_info("Node %d - SYS/FUSE coremask %x\n", n, syscoremask);
- ncores = nlm_cores_per_node();
- for (core = 0; core < ncores; core++) {
- /* we will be on node 0 core 0 */
- if (n == 0 && core == 0)
- continue;
-
- /* see if the core exists */
- if ((syscoremask & (1 << core)) == 0)
- continue;
-
- /* see if at least the first hw thread is enabled */
- cpu = (n * ncores + core) * NLM_THREADS_PER_CORE;
- if (!cpumask_test_cpu(cpu, wakeup_mask))
- continue;
-
- /* wake up the core */
- if (!xlp_wakeup_core(nodep->sysbase, n, core))
- continue;
-
- /* core is up */
- nodep->coremask |= 1u << core;
-
- /* spin until the hw threads sets their ready */
- if (!wait_for_cpus(cpu, 0))
- pr_err("Node %d : timeout core %d\n", n, core);
- }
- }
-}
-
-void xlp_wakeup_secondary_cpus(void)
-{
- /*
- * In case of u-boot, the secondaries are in reset
- * first wakeup core 0 threads
- */
- xlp_boot_core0_siblings();
- if (!wait_for_cpus(0, 0))
- pr_err("Node 0 : timeout core 0\n");
-
- /* now get other cores out of reset */
- xlp_enable_secondary_cores(&nlm_cpumask);
-}
diff --git a/arch/mips/netlogic/xlr/Makefile b/arch/mips/netlogic/xlr/Makefile
deleted file mode 100644
index 7c83100e5722..000000000000
--- a/arch/mips/netlogic/xlr/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y += fmn.o fmn-config.o setup.o platform.o platform-flash.o
-obj-$(CONFIG_SMP) += wakeup.o
diff --git a/arch/mips/netlogic/xlr/fmn-config.c b/arch/mips/netlogic/xlr/fmn-config.c
deleted file mode 100644
index 15483537e8cf..000000000000
--- a/arch/mips/netlogic/xlr/fmn-config.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * Copyright (c) 2003-2012 Broadcom Corporation
- * All Rights Reserved
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the Broadcom
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <asm/cpu-info.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/netlogic/xlr/fmn.h>
-#include <asm/netlogic/xlr/xlr.h>
-#include <asm/netlogic/common.h>
-#include <asm/netlogic/haldefs.h>
-
-struct xlr_board_fmn_config xlr_board_fmn_config;
-
-static void __maybe_unused print_credit_config(struct xlr_fmn_info *fmn_info)
-{
- int bkt;
-
- pr_info("Bucket size :\n");
- pr_info("Station\t: Size\n");
- for (bkt = 0; bkt < 16; bkt++)
- pr_info(" %d %d %d %d %d %d %d %d\n",
- xlr_board_fmn_config.bucket_size[(bkt * 8) + 0],
- xlr_board_fmn_config.bucket_size[(bkt * 8) + 1],
- xlr_board_fmn_config.bucket_size[(bkt * 8) + 2],
- xlr_board_fmn_config.bucket_size[(bkt * 8) + 3],
- xlr_board_fmn_config.bucket_size[(bkt * 8) + 4],
- xlr_board_fmn_config.bucket_size[(bkt * 8) + 5],
- xlr_board_fmn_config.bucket_size[(bkt * 8) + 6],
- xlr_board_fmn_config.bucket_size[(bkt * 8) + 7]);
- pr_info("\n");
-
- pr_info("Credits distribution :\n");
- pr_info("Station\t: Size\n");
- for (bkt = 0; bkt < 16; bkt++)
- pr_info(" %d %d %d %d %d %d %d %d\n",
- fmn_info->credit_config[(bkt * 8) + 0],
- fmn_info->credit_config[(bkt * 8) + 1],
- fmn_info->credit_config[(bkt * 8) + 2],
- fmn_info->credit_config[(bkt * 8) + 3],
- fmn_info->credit_config[(bkt * 8) + 4],
- fmn_info->credit_config[(bkt * 8) + 5],
- fmn_info->credit_config[(bkt * 8) + 6],
- fmn_info->credit_config[(bkt * 8) + 7]);
- pr_info("\n");
-}
-
-static void check_credit_distribution(void)
-{
- struct xlr_board_fmn_config *cfg = &xlr_board_fmn_config;
- int bkt, n, total_credits, ncores;
-
- ncores = hweight32(nlm_current_node()->coremask);
- for (bkt = 0; bkt < 128; bkt++) {
- total_credits = 0;
- for (n = 0; n < ncores; n++)
- total_credits += cfg->cpu[n].credit_config[bkt];
- total_credits += cfg->gmac[0].credit_config[bkt];
- total_credits += cfg->gmac[1].credit_config[bkt];
- total_credits += cfg->dma.credit_config[bkt];
- total_credits += cfg->cmp.credit_config[bkt];
- total_credits += cfg->sae.credit_config[bkt];
- total_credits += cfg->xgmac[0].credit_config[bkt];
- total_credits += cfg->xgmac[1].credit_config[bkt];
- if (total_credits > cfg->bucket_size[bkt])
- pr_err("ERROR: Bucket %d: credits (%d) > size (%d)\n",
- bkt, total_credits, cfg->bucket_size[bkt]);
- }
- pr_info("Credit distribution complete.\n");
-}
-
-/**
- * setup_fmn_cc - Configure bucket size and credits for a device.
- * @dev_info: FMN information structure for each devices
- * @start_stn_id: Starting station id of dev_info
- * @end_stn_id: End station id of dev_info
- * @num_buckets: Total number of buckets for den_info
- * @cpu_credits: Allowed credits to cpu for each devices pointing by dev_info
- * @size: Size of the each buckets in the device station
- *
- * 'size' is the size of the buckets for the device. This size is
- * distributed among all the CPUs
- * so that all of them can send messages to the device.
- *
- * The device is also given 'cpu_credits' to send messages to the CPUs
- */
-static void setup_fmn_cc(struct xlr_fmn_info *dev_info, int start_stn_id,
- int end_stn_id, int num_buckets, int cpu_credits, int size)
-{
- int i, j, num_core, n, credits_per_cpu;
- struct xlr_fmn_info *cpu = xlr_board_fmn_config.cpu;
-
- num_core = hweight32(nlm_current_node()->coremask);
- dev_info->num_buckets = num_buckets;
- dev_info->start_stn_id = start_stn_id;
- dev_info->end_stn_id = end_stn_id;
-
- n = num_core;
- if (num_core == 3)
- n = 4;
-
- for (i = start_stn_id; i <= end_stn_id; i++) {
- xlr_board_fmn_config.bucket_size[i] = size;
-
- /* Dividing device credits equally to cpus */
- credits_per_cpu = size / n;
- for (j = 0; j < num_core; j++)
- cpu[j].credit_config[i] = credits_per_cpu;
-
- /* credits left to distribute */
- credits_per_cpu = size - (credits_per_cpu * num_core);
-
- /* distribute the remaining credits (if any), among cores */
- for (j = 0; (j < num_core) && (credits_per_cpu >= 4); j++) {
- cpu[j].credit_config[i] += 4;
- credits_per_cpu -= 4;
- }
- }
-
- /* Distributing cpu per bucket credits to devices */
- for (i = 0; i < num_core; i++) {
- for (j = 0; j < FMN_CORE_NBUCKETS; j++)
- dev_info->credit_config[(i * 8) + j] = cpu_credits;
- }
-}
-
-/*
- * Each core has 256 slots and 8 buckets,
- * Configure the 8 buckets each with 32 slots
- */
-static void setup_cpu_fmninfo(struct xlr_fmn_info *cpu, int num_core)
-{
- int i, j;
-
- for (i = 0; i < num_core; i++) {
- cpu[i].start_stn_id = (8 * i);
- cpu[i].end_stn_id = (8 * i + 8);
-
- for (j = cpu[i].start_stn_id; j < cpu[i].end_stn_id; j++)
- xlr_board_fmn_config.bucket_size[j] = 32;
- }
-}
-
-/**
- * xlr_board_info_setup - Setup FMN details
- *
- * Setup the FMN details for each devices according to the device available
- * in each variant of XLR/XLS processor
- */
-void xlr_board_info_setup(void)
-{
- struct xlr_fmn_info *cpu = xlr_board_fmn_config.cpu;
- struct xlr_fmn_info *gmac = xlr_board_fmn_config.gmac;
- struct xlr_fmn_info *xgmac = xlr_board_fmn_config.xgmac;
- struct xlr_fmn_info *dma = &xlr_board_fmn_config.dma;
- struct xlr_fmn_info *cmp = &xlr_board_fmn_config.cmp;
- struct xlr_fmn_info *sae = &xlr_board_fmn_config.sae;
- int processor_id, num_core;
-
- num_core = hweight32(nlm_current_node()->coremask);
- processor_id = read_c0_prid() & PRID_IMP_MASK;
-
- setup_cpu_fmninfo(cpu, num_core);
- switch (processor_id) {
- case PRID_IMP_NETLOGIC_XLS104:
- case PRID_IMP_NETLOGIC_XLS108:
- setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
- FMN_STNID_GMAC0_TX3, 8, 16, 32);
- setup_fmn_cc(dma, FMN_STNID_DMA_0,
- FMN_STNID_DMA_3, 4, 8, 64);
- setup_fmn_cc(sae, FMN_STNID_SEC0,
- FMN_STNID_SEC1, 2, 8, 128);
- break;
-
- case PRID_IMP_NETLOGIC_XLS204:
- case PRID_IMP_NETLOGIC_XLS208:
- setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
- FMN_STNID_GMAC0_TX3, 8, 16, 32);
- setup_fmn_cc(dma, FMN_STNID_DMA_0,
- FMN_STNID_DMA_3, 4, 8, 64);
- setup_fmn_cc(sae, FMN_STNID_SEC0,
- FMN_STNID_SEC1, 2, 8, 128);
- break;
-
- case PRID_IMP_NETLOGIC_XLS404:
- case PRID_IMP_NETLOGIC_XLS408:
- case PRID_IMP_NETLOGIC_XLS404B:
- case PRID_IMP_NETLOGIC_XLS408B:
- case PRID_IMP_NETLOGIC_XLS416B:
- case PRID_IMP_NETLOGIC_XLS608B:
- case PRID_IMP_NETLOGIC_XLS616B:
- setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
- FMN_STNID_GMAC0_TX3, 8, 8, 32);
- setup_fmn_cc(&gmac[1], FMN_STNID_GMAC1_FR_0,
- FMN_STNID_GMAC1_TX3, 8, 8, 32);
- setup_fmn_cc(dma, FMN_STNID_DMA_0,
- FMN_STNID_DMA_3, 4, 4, 64);
- setup_fmn_cc(cmp, FMN_STNID_CMP_0,
- FMN_STNID_CMP_3, 4, 4, 64);
- setup_fmn_cc(sae, FMN_STNID_SEC0,
- FMN_STNID_SEC1, 2, 8, 128);
- break;
-
- case PRID_IMP_NETLOGIC_XLS412B:
- setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
- FMN_STNID_GMAC0_TX3, 8, 8, 32);
- setup_fmn_cc(&gmac[1], FMN_STNID_GMAC1_FR_0,
- FMN_STNID_GMAC1_TX3, 8, 8, 32);
- setup_fmn_cc(dma, FMN_STNID_DMA_0,
- FMN_STNID_DMA_3, 4, 4, 64);
- setup_fmn_cc(cmp, FMN_STNID_CMP_0,
- FMN_STNID_CMP_3, 4, 4, 64);
- setup_fmn_cc(sae, FMN_STNID_SEC0,
- FMN_STNID_SEC1, 2, 8, 128);
- break;
-
- case PRID_IMP_NETLOGIC_XLR308:
- case PRID_IMP_NETLOGIC_XLR308C:
- setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
- FMN_STNID_GMAC0_TX3, 8, 16, 32);
- setup_fmn_cc(dma, FMN_STNID_DMA_0,
- FMN_STNID_DMA_3, 4, 8, 64);
- setup_fmn_cc(sae, FMN_STNID_SEC0,
- FMN_STNID_SEC1, 2, 4, 128);
- break;
-
- case PRID_IMP_NETLOGIC_XLR532:
- case PRID_IMP_NETLOGIC_XLR532C:
- case PRID_IMP_NETLOGIC_XLR516C:
- case PRID_IMP_NETLOGIC_XLR508C:
- setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
- FMN_STNID_GMAC0_TX3, 8, 16, 32);
- setup_fmn_cc(dma, FMN_STNID_DMA_0,
- FMN_STNID_DMA_3, 4, 8, 64);
- setup_fmn_cc(sae, FMN_STNID_SEC0,
- FMN_STNID_SEC1, 2, 4, 128);
- break;
-
- case PRID_IMP_NETLOGIC_XLR732:
- case PRID_IMP_NETLOGIC_XLR716:
- setup_fmn_cc(&xgmac[0], FMN_STNID_XMAC0_00_TX,
- FMN_STNID_XMAC0_15_TX, 8, 0, 32);
- setup_fmn_cc(&xgmac[1], FMN_STNID_XMAC1_00_TX,
- FMN_STNID_XMAC1_15_TX, 8, 0, 32);
- setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
- FMN_STNID_GMAC0_TX3, 8, 24, 32);
- setup_fmn_cc(dma, FMN_STNID_DMA_0,
- FMN_STNID_DMA_3, 4, 4, 64);
- setup_fmn_cc(sae, FMN_STNID_SEC0,
- FMN_STNID_SEC1, 2, 4, 128);
- break;
- default:
- pr_err("Unknown CPU with processor ID [%d]\n", processor_id);
- pr_err("Error: Cannot initialize FMN credits.\n");
- }
-
- check_credit_distribution();
-
-#if 0 /* debug */
- print_credit_config(&cpu[0]);
- print_credit_config(&gmac[0]);
-#endif
-}
diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c
deleted file mode 100644
index f90303f31967..000000000000
--- a/arch/mips/netlogic/xlr/fmn.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * Copyright (c) 2003-2012 Broadcom Corporation
- * All Rights Reserved
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the Broadcom
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/kernel.h>
-#include <linux/irqreturn.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/mipsregs.h>
-#include <asm/netlogic/interrupt.h>
-#include <asm/netlogic/xlr/fmn.h>
-#include <asm/netlogic/common.h>
-
-#define COP2_CC_INIT_CPU_DEST(dest, conf) \
-do { \
- nlm_write_c2_cc##dest(0, conf[(dest * 8) + 0]); \
- nlm_write_c2_cc##dest(1, conf[(dest * 8) + 1]); \
- nlm_write_c2_cc##dest(2, conf[(dest * 8) + 2]); \
- nlm_write_c2_cc##dest(3, conf[(dest * 8) + 3]); \
- nlm_write_c2_cc##dest(4, conf[(dest * 8) + 4]); \
- nlm_write_c2_cc##dest(5, conf[(dest * 8) + 5]); \
- nlm_write_c2_cc##dest(6, conf[(dest * 8) + 6]); \
- nlm_write_c2_cc##dest(7, conf[(dest * 8) + 7]); \
-} while (0)
-
-struct fmn_message_handler {
- void (*action)(int, int, int, int, struct nlm_fmn_msg *, void *);
- void *arg;
-} msg_handlers[128];
-
-/*
- * FMN interrupt handler. We configure the FMN so that any messages in
- * any of the CPU buckets will trigger an interrupt on the CPU.
- * The message can be from any device on the FMN (like NAE/SAE/DMA).
- * The source station id is used to figure out which of the registered
- * handlers have to be called.
- */
-static irqreturn_t fmn_message_handler(int irq, void *data)
-{
- struct fmn_message_handler *hndlr;
- int bucket, rv;
- int size = 0, code = 0, src_stnid = 0;
- struct nlm_fmn_msg msg;
- uint32_t mflags, bkt_status;
-
- mflags = nlm_cop2_enable_irqsave();
- /* Disable message ring interrupt */
- nlm_fmn_setup_intr(irq, 0);
- while (1) {
- /* 8 bkts per core, [24:31] each bit represents one bucket
- * Bit is Zero if bucket is not empty */
- bkt_status = (nlm_read_c2_status0() >> 24) & 0xff;
- if (bkt_status == 0xff)
- break;
- for (bucket = 0; bucket < 8; bucket++) {
- /* Continue on empty bucket */
- if (bkt_status & (1 << bucket))
- continue;
- rv = nlm_fmn_receive(bucket, &size, &code, &src_stnid,
- &msg);
- if (rv != 0)
- continue;
-
- hndlr = &msg_handlers[src_stnid];
- if (hndlr->action == NULL)
- pr_warn("No msgring handler for stnid %d\n",
- src_stnid);
- else {
- nlm_cop2_disable_irqrestore(mflags);
- hndlr->action(bucket, src_stnid, size, code,
- &msg, hndlr->arg);
- mflags = nlm_cop2_enable_irqsave();
- }
- }
- }
- /* Enable message ring intr, to any thread in core */
- nlm_fmn_setup_intr(irq, (1 << nlm_threads_per_core) - 1);
- nlm_cop2_disable_irqrestore(mflags);
- return IRQ_HANDLED;
-}
-
-void xlr_percpu_fmn_init(void)
-{
- struct xlr_fmn_info *cpu_fmn_info;
- int *bucket_sizes;
- uint32_t flags;
- int id;
-
- BUG_ON(nlm_thread_id() != 0);
- id = nlm_core_id();
-
- bucket_sizes = xlr_board_fmn_config.bucket_size;
- cpu_fmn_info = &xlr_board_fmn_config.cpu[id];
- flags = nlm_cop2_enable_irqsave();
-
- /* Setup bucket sizes for the core. */
- nlm_write_c2_bucksize(0, bucket_sizes[id * 8 + 0]);
- nlm_write_c2_bucksize(1, bucket_sizes[id * 8 + 1]);
- nlm_write_c2_bucksize(2, bucket_sizes[id * 8 + 2]);
- nlm_write_c2_bucksize(3, bucket_sizes[id * 8 + 3]);
- nlm_write_c2_bucksize(4, bucket_sizes[id * 8 + 4]);
- nlm_write_c2_bucksize(5, bucket_sizes[id * 8 + 5]);
- nlm_write_c2_bucksize(6, bucket_sizes[id * 8 + 6]);
- nlm_write_c2_bucksize(7, bucket_sizes[id * 8 + 7]);
-
- /*
- * For sending FMN messages, we need credits on the destination
- * bucket. Program the credits this core has on the 128 possible
- * destination buckets.
- * We cannot use a loop here, because the the first argument has
- * to be a constant integer value.
- */
- COP2_CC_INIT_CPU_DEST(0, cpu_fmn_info->credit_config);
- COP2_CC_INIT_CPU_DEST(1, cpu_fmn_info->credit_config);
- COP2_CC_INIT_CPU_DEST(2, cpu_fmn_info->credit_config);
- COP2_CC_INIT_CPU_DEST(3, cpu_fmn_info->credit_config);
- COP2_CC_INIT_CPU_DEST(4, cpu_fmn_info->credit_config);
- COP2_CC_INIT_CPU_DEST(5, cpu_fmn_info->credit_config);
- COP2_CC_INIT_CPU_DEST(6, cpu_fmn_info->credit_config);
- COP2_CC_INIT_CPU_DEST(7, cpu_fmn_info->credit_config);
- COP2_CC_INIT_CPU_DEST(8, cpu_fmn_info->credit_config);
- COP2_CC_INIT_CPU_DEST(9, cpu_fmn_info->credit_config);
- COP2_CC_INIT_CPU_DEST(10, cpu_fmn_info->credit_config);
- COP2_CC_INIT_CPU_DEST(11, cpu_fmn_info->credit_config);
- COP2_CC_INIT_CPU_DEST(12, cpu_fmn_info->credit_config);
- COP2_CC_INIT_CPU_DEST(13, cpu_fmn_info->credit_config);
- COP2_CC_INIT_CPU_DEST(14, cpu_fmn_info->credit_config);
- COP2_CC_INIT_CPU_DEST(15, cpu_fmn_info->credit_config);
-
- /* enable FMN interrupts on this CPU */
- nlm_fmn_setup_intr(IRQ_FMN, (1 << nlm_threads_per_core) - 1);
- nlm_cop2_disable_irqrestore(flags);
-}
-
-
-/*
- * Register a FMN message handler with respect to the source station id
- * @stnid: source station id
- * @action: Handler function pointer
- */
-int nlm_register_fmn_handler(int start_stnid, int end_stnid,
- void (*action)(int, int, int, int, struct nlm_fmn_msg *, void *),
- void *arg)
-{
- int sstnid;
-
- for (sstnid = start_stnid; sstnid <= end_stnid; sstnid++) {
- msg_handlers[sstnid].arg = arg;
- smp_wmb();
- msg_handlers[sstnid].action = action;
- }
- pr_debug("Registered FMN msg handler for stnid %d-%d\n",
- start_stnid, end_stnid);
- return 0;
-}
-
-void nlm_setup_fmn_irq(void)
-{
- uint32_t flags;
-
- /* request irq only once */
- if (request_irq(IRQ_FMN, fmn_message_handler, IRQF_PERCPU, "fmn", NULL))
- pr_err("Failed to request irq %d (fmn)\n", IRQ_FMN);
-
- flags = nlm_cop2_enable_irqsave();
- nlm_fmn_setup_intr(IRQ_FMN, (1 << nlm_threads_per_core) - 1);
- nlm_cop2_disable_irqrestore(flags);
-}
diff --git a/arch/mips/netlogic/xlr/platform-flash.c b/arch/mips/netlogic/xlr/platform-flash.c
deleted file mode 100644
index cf9162284b07..000000000000
--- a/arch/mips/netlogic/xlr/platform-flash.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * Copyright 2011, Netlogic Microsystems.
- * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/resource.h>
-#include <linux/spi/flash.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/platnand.h>
-
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/xlr/iomap.h>
-#include <asm/netlogic/xlr/flash.h>
-#include <asm/netlogic/xlr/bridge.h>
-#include <asm/netlogic/xlr/gpio.h>
-#include <asm/netlogic/xlr/xlr.h>
-
-/*
- * Default NOR partition layout
- */
-static struct mtd_partition xlr_nor_parts[] = {
- {
- .name = "User FS",
- .offset = 0x800000,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-/*
- * Default NAND partition layout
- */
-static struct mtd_partition xlr_nand_parts[] = {
- {
- .name = "Root Filesystem",
- .offset = 64 * 64 * 2048,
- .size = 432 * 64 * 2048,
- },
- {
- .name = "Home Filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-/* Use PHYSMAP flash for NOR */
-struct physmap_flash_data xlr_nor_data = {
- .width = 2,
- .parts = xlr_nor_parts,
- .nr_parts = ARRAY_SIZE(xlr_nor_parts),
-};
-
-static struct resource xlr_nor_res[] = {
- {
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device xlr_nor_dev = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &xlr_nor_data,
- },
- .num_resources = ARRAY_SIZE(xlr_nor_res),
- .resource = xlr_nor_res,
-};
-
-/*
- * Use "gen_nand" driver for NAND flash
- *
- * There seems to be no way to store a private pointer containing
- * platform specific info in gen_nand drivier. We will use a global
- * struct for now, since we currently have only one NAND chip per board.
- */
-struct xlr_nand_flash_priv {
- int cs;
- uint64_t flash_mmio;
-};
-
-static struct xlr_nand_flash_priv nand_priv;
-
-static void xlr_nand_ctrl(struct nand_chip *chip, int cmd,
- unsigned int ctrl)
-{
- if (ctrl & NAND_CLE)
- nlm_write_reg(nand_priv.flash_mmio,
- FLASH_NAND_CLE(nand_priv.cs), cmd);
- else if (ctrl & NAND_ALE)
- nlm_write_reg(nand_priv.flash_mmio,
- FLASH_NAND_ALE(nand_priv.cs), cmd);
-}
-
-struct platform_nand_data xlr_nand_data = {
- .chip = {
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(xlr_nand_parts),
- .chip_delay = 50,
- .partitions = xlr_nand_parts,
- },
- .ctrl = {
- .cmd_ctrl = xlr_nand_ctrl,
- },
-};
-
-static struct resource xlr_nand_res[] = {
- {
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device xlr_nand_dev = {
- .name = "gen_nand",
- .id = -1,
- .num_resources = ARRAY_SIZE(xlr_nand_res),
- .resource = xlr_nand_res,
- .dev = {
- .platform_data = &xlr_nand_data,
- }
-};
-
-/*
- * XLR/XLS supports upto 8 devices on its FLASH interface. The value in
- * FLASH_BAR (on the MEM/IO bridge) gives the base for mapping all the
- * flash devices.
- * Under this, each flash device has an offset and size given by the
- * CSBASE_ADDR and CSBASE_MASK registers for the device.
- *
- * The CSBASE_ registers are expected to be setup by the bootloader.
- */
-static void setup_flash_resource(uint64_t flash_mmio,
- uint64_t flash_map_base, int cs, struct resource *res)
-{
- u32 base, mask;
-
- base = nlm_read_reg(flash_mmio, FLASH_CSBASE_ADDR(cs));
- mask = nlm_read_reg(flash_mmio, FLASH_CSADDR_MASK(cs));
-
- res->start = flash_map_base + ((unsigned long)base << 16);
- res->end = res->start + (mask + 1) * 64 * 1024;
-}
-
-static int __init xlr_flash_init(void)
-{
- uint64_t gpio_mmio, flash_mmio, flash_map_base;
- u32 gpio_resetcfg, flash_bar;
- int cs, boot_nand, boot_nor;
-
- /* Flash address bits 39:24 is in bridge flash BAR */
- flash_bar = nlm_read_reg(nlm_io_base, BRIDGE_FLASH_BAR);
- flash_map_base = (flash_bar & 0xffff0000) << 8;
-
- gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
- flash_mmio = nlm_mmio_base(NETLOGIC_IO_FLASH_OFFSET);
-
- /* Get the chip reset config */
- gpio_resetcfg = nlm_read_reg(gpio_mmio, GPIO_PWRON_RESET_CFG_REG);
-
- /* Check for boot flash type */
- boot_nor = boot_nand = 0;
- if (nlm_chip_is_xls()) {
- /* On XLS, check boot from NAND bit (GPIO reset reg bit 16) */
- if (gpio_resetcfg & (1 << 16))
- boot_nand = 1;
-
- /* check boot from PCMCIA, (GPIO reset reg bit 15 */
- if ((gpio_resetcfg & (1 << 15)) == 0)
- boot_nor = 1; /* not set, booted from NOR */
- } else { /* XLR */
- /* check boot from PCMCIA (bit 16 in GPIO reset on XLR) */
- if ((gpio_resetcfg & (1 << 16)) == 0)
- boot_nor = 1; /* not set, booted from NOR */
- }
-
- /* boot flash at chip select 0 */
- cs = 0;
-
- if (boot_nand) {
- nand_priv.cs = cs;
- nand_priv.flash_mmio = flash_mmio;
- setup_flash_resource(flash_mmio, flash_map_base, cs,
- xlr_nand_res);
-
- /* Initialize NAND flash at CS 0 */
- nlm_write_reg(flash_mmio, FLASH_CSDEV_PARM(cs),
- FLASH_NAND_CSDEV_PARAM);
- nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMA(cs),
- FLASH_NAND_CSTIME_PARAMA);
- nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMB(cs),
- FLASH_NAND_CSTIME_PARAMB);
-
- pr_info("ChipSelect %d: NAND Flash %pR\n", cs, xlr_nand_res);
- return platform_device_register(&xlr_nand_dev);
- }
-
- if (boot_nor) {
- setup_flash_resource(flash_mmio, flash_map_base, cs,
- xlr_nor_res);
- pr_info("ChipSelect %d: NOR Flash %pR\n", cs, xlr_nor_res);
- return platform_device_register(&xlr_nor_dev);
- }
- return 0;
-}
-
-arch_initcall(xlr_flash_init);
diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c
deleted file mode 100644
index 4785932af248..000000000000
--- a/arch/mips/netlogic/xlr/platform.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * Copyright 2011, Netlogic Microsystems.
- * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/resource.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/i2c.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/xlr/iomap.h>
-#include <asm/netlogic/xlr/pic.h>
-#include <asm/netlogic/xlr/xlr.h>
-
-static unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset)
-{
- uint64_t uartbase;
- unsigned int value;
-
- /* sign extend to 64 bits, if needed */
- uartbase = (uint64_t)(long)p->membase;
- value = nlm_read_reg(uartbase, offset);
-
- /* See XLR/XLS errata */
- if (offset == UART_MSR)
- value ^= 0xF0;
- else if (offset == UART_MCR)
- value ^= 0x3;
-
- return value;
-}
-
-static void nlm_xlr_uart_out(struct uart_port *p, int offset, int value)
-{
- uint64_t uartbase;
-
- /* sign extend to 64 bits, if needed */
- uartbase = (uint64_t)(long)p->membase;
-
- /* See XLR/XLS errata */
- if (offset == UART_MSR)
- value ^= 0xF0;
- else if (offset == UART_MCR)
- value ^= 0x3;
-
- nlm_write_reg(uartbase, offset, value);
-}
-
-#define PORT(_irq) \
- { \
- .irq = _irq, \
- .regshift = 2, \
- .iotype = UPIO_MEM32, \
- .flags = (UPF_SKIP_TEST | \
- UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF),\
- .uartclk = PIC_CLK_HZ, \
- .type = PORT_16550A, \
- .serial_in = nlm_xlr_uart_in, \
- .serial_out = nlm_xlr_uart_out, \
- }
-
-static struct plat_serial8250_port xlr_uart_data[] = {
- PORT(PIC_UART_0_IRQ),
- PORT(PIC_UART_1_IRQ),
- {},
-};
-
-static struct platform_device uart_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = xlr_uart_data,
- },
-};
-
-static int __init nlm_uart_init(void)
-{
- unsigned long uartbase;
-
- uartbase = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET);
- xlr_uart_data[0].membase = (void __iomem *)uartbase;
- xlr_uart_data[0].mapbase = CPHYSADDR(uartbase);
-
- uartbase = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_1_OFFSET);
- xlr_uart_data[1].membase = (void __iomem *)uartbase;
- xlr_uart_data[1].mapbase = CPHYSADDR(uartbase);
-
- return platform_device_register(&uart_device);
-}
-
-arch_initcall(nlm_uart_init);
-
-#ifdef CONFIG_USB
-/* Platform USB devices, only on XLS chips */
-static u64 xls_usb_dmamask = ~(u32)0;
-#define USB_PLATFORM_DEV(n, i, irq) \
- { \
- .name = n, \
- .id = i, \
- .num_resources = 2, \
- .dev = { \
- .dma_mask = &xls_usb_dmamask, \
- .coherent_dma_mask = 0xffffffff, \
- }, \
- .resource = (struct resource[]) { \
- { \
- .flags = IORESOURCE_MEM, \
- }, \
- { \
- .start = irq, \
- .end = irq, \
- .flags = IORESOURCE_IRQ, \
- }, \
- }, \
- }
-
-static struct usb_ehci_pdata xls_usb_ehci_pdata = {
- .caps_offset = 0,
-};
-
-static struct usb_ohci_pdata xls_usb_ohci_pdata;
-
-static struct platform_device xls_usb_ehci_device =
- USB_PLATFORM_DEV("ehci-platform", 0, PIC_USB_IRQ);
-static struct platform_device xls_usb_ohci_device_0 =
- USB_PLATFORM_DEV("ohci-platform", 1, PIC_USB_IRQ);
-static struct platform_device xls_usb_ohci_device_1 =
- USB_PLATFORM_DEV("ohci-platform", 2, PIC_USB_IRQ);
-
-static struct platform_device *xls_platform_devices[] = {
- &xls_usb_ehci_device,
- &xls_usb_ohci_device_0,
- &xls_usb_ohci_device_1,
-};
-
-int xls_platform_usb_init(void)
-{
- uint64_t usb_mmio, gpio_mmio;
- unsigned long memres;
- uint32_t val;
-
- if (!nlm_chip_is_xls())
- return 0;
-
- gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
- usb_mmio = nlm_mmio_base(NETLOGIC_IO_USB_1_OFFSET);
-
- /* Clear Rogue Phy INTs */
- nlm_write_reg(usb_mmio, 49, 0x10000000);
- /* Enable all interrupts */
- nlm_write_reg(usb_mmio, 50, 0x1f000000);
-
- /* Enable ports */
- nlm_write_reg(usb_mmio, 1, 0x07000500);
-
- val = nlm_read_reg(gpio_mmio, 21);
- if (((val >> 22) & 0x01) == 0) {
- pr_info("Detected USB Device mode - Not supported!\n");
- nlm_write_reg(usb_mmio, 0, 0x01000000);
- return 0;
- }
-
- pr_info("Detected USB Host mode - Adding XLS USB devices.\n");
- /* Clear reset, host mode */
- nlm_write_reg(usb_mmio, 0, 0x02000000);
-
- /* Memory resource for various XLS usb ports */
- usb_mmio = nlm_mmio_base(NETLOGIC_IO_USB_0_OFFSET);
- memres = CPHYSADDR((unsigned long)usb_mmio);
- xls_usb_ehci_device.resource[0].start = memres;
- xls_usb_ehci_device.resource[0].end = memres + 0x400 - 1;
- xls_usb_ehci_device.dev.platform_data = &xls_usb_ehci_pdata;
-
- memres += 0x400;
- xls_usb_ohci_device_0.resource[0].start = memres;
- xls_usb_ohci_device_0.resource[0].end = memres + 0x400 - 1;
- xls_usb_ohci_device_0.dev.platform_data = &xls_usb_ohci_pdata;
-
- memres += 0x400;
- xls_usb_ohci_device_1.resource[0].start = memres;
- xls_usb_ohci_device_1.resource[0].end = memres + 0x400 - 1;
- xls_usb_ohci_device_1.dev.platform_data = &xls_usb_ohci_pdata;
-
- return platform_add_devices(xls_platform_devices,
- ARRAY_SIZE(xls_platform_devices));
-}
-
-arch_initcall(xls_platform_usb_init);
-#endif
-
-#ifdef CONFIG_I2C
-static struct i2c_board_info nlm_i2c_board_info1[] __initdata = {
- /* All XLR boards have this RTC and Max6657 Temp Chip */
- [0] = {
- .type = "ds1374",
- .addr = 0x68
- },
- [1] = {
- .type = "lm90",
- .addr = 0x4c
- },
-};
-
-static struct resource i2c_resources[] = {
- [0] = {
- .start = 0, /* filled at init */
- .end = 0,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device nlm_xlr_i2c_1 = {
- .name = "xlr-i2cbus",
- .id = 1,
- .num_resources = 1,
- .resource = i2c_resources,
-};
-
-static int __init nlm_i2c_init(void)
-{
- int err = 0;
- unsigned int offset;
-
- /* I2C bus 0 does not have any useful devices, configure only bus 1 */
- offset = NETLOGIC_IO_I2C_1_OFFSET;
- nlm_xlr_i2c_1.resource[0].start = CPHYSADDR(nlm_mmio_base(offset));
- nlm_xlr_i2c_1.resource[0].end = nlm_xlr_i2c_1.resource[0].start + 0xfff;
-
- platform_device_register(&nlm_xlr_i2c_1);
-
- err = i2c_register_board_info(1, nlm_i2c_board_info1,
- ARRAY_SIZE(nlm_i2c_board_info1));
- if (err < 0)
- pr_err("nlm-i2c: cannot register board I2C devices\n");
- return err;
-}
-
-arch_initcall(nlm_i2c_init);
-#endif
diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c
deleted file mode 100644
index aa83d691df0f..000000000000
--- a/arch/mips/netlogic/xlr/setup.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/kernel.h>
-#include <linux/serial_8250.h>
-#include <linux/memblock.h>
-#include <linux/pm.h>
-
-#include <asm/idle.h>
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/bootinfo.h>
-
-#include <asm/netlogic/interrupt.h>
-#include <asm/netlogic/psb-bootinfo.h>
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/common.h>
-
-#include <asm/netlogic/xlr/xlr.h>
-#include <asm/netlogic/xlr/iomap.h>
-#include <asm/netlogic/xlr/pic.h>
-#include <asm/netlogic/xlr/gpio.h>
-#include <asm/netlogic/xlr/fmn.h>
-
-uint64_t nlm_io_base = DEFAULT_NETLOGIC_IO_BASE;
-struct psb_info nlm_prom_info;
-
-/* default to uniprocessor */
-unsigned int nlm_threads_per_core = 1;
-struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
-cpumask_t nlm_cpumask = CPU_MASK_CPU0;
-
-static void nlm_linux_exit(void)
-{
- uint64_t gpiobase;
-
- gpiobase = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
- /* trigger a chip reset by writing 1 to GPIO_SWRESET_REG */
- nlm_write_reg(gpiobase, GPIO_SWRESET_REG, 1);
- for ( ; ; )
- cpu_wait();
-}
-
-void __init plat_mem_setup(void)
-{
- _machine_restart = (void (*)(char *))nlm_linux_exit;
- _machine_halt = nlm_linux_exit;
- pm_power_off = nlm_linux_exit;
-}
-
-const char *get_system_type(void)
-{
- return "Netlogic XLR/XLS Series";
-}
-
-unsigned int nlm_get_cpu_frequency(void)
-{
- return (unsigned int)nlm_prom_info.cpu_frequency;
-}
-
-void nlm_percpu_init(int hwcpuid)
-{
- if (hwcpuid % 4 == 0)
- xlr_percpu_fmn_init();
-}
-
-static void __init build_arcs_cmdline(int *argv)
-{
- int i, remain, len;
- char *arg;
-
- remain = sizeof(arcs_cmdline) - 1;
- arcs_cmdline[0] = '\0';
- for (i = 0; argv[i] != 0; i++) {
- arg = (char *)(long)argv[i];
- len = strlen(arg);
- if (len + 1 > remain)
- break;
- strcat(arcs_cmdline, arg);
- strcat(arcs_cmdline, " ");
- remain -= len + 1;
- }
-
- /* Add the default options here */
- if ((strstr(arcs_cmdline, "console=")) == NULL) {
- arg = "console=ttyS0,38400 ";
- len = strlen(arg);
- if (len > remain)
- goto fail;
- strcat(arcs_cmdline, arg);
- remain -= len;
- }
-#ifdef CONFIG_BLK_DEV_INITRD
- if ((strstr(arcs_cmdline, "rdinit=")) == NULL) {
- arg = "rdinit=/sbin/init ";
- len = strlen(arg);
- if (len > remain)
- goto fail;
- strcat(arcs_cmdline, arg);
- remain -= len;
- }
-#endif
- return;
-fail:
- panic("Cannot add %s, command line too big!", arg);
-}
-
-static void prom_add_memory(void)
-{
- struct nlm_boot_mem_map *bootm;
- u64 start, size;
- u64 pref_backup = 512; /* avoid pref walking beyond end */
- int i;
-
- bootm = (void *)(long)nlm_prom_info.psb_mem_map;
- for (i = 0; i < bootm->nr_map; i++) {
- if (bootm->map[i].type != NLM_BOOT_MEM_RAM)
- continue;
- start = bootm->map[i].addr;
- size = bootm->map[i].size;
-
- /* Work around for using bootloader mem */
- if (i == 0 && start == 0 && size == 0x0c000000)
- size = 0x0ff00000;
-
- memblock_add(start, size - pref_backup);
- }
-}
-
-static void nlm_init_node(void)
-{
- struct nlm_soc_info *nodep;
-
- nodep = nlm_current_node();
- nodep->picbase = nlm_mmio_base(NETLOGIC_IO_PIC_OFFSET);
- nodep->ebase = read_c0_ebase() & MIPS_EBASE_BASE;
- spin_lock_init(&nodep->piclock);
-}
-
-void __init prom_init(void)
-{
- int *argv, *envp; /* passed as 32 bit ptrs */
- struct psb_info *prom_infop;
- void *reset_vec;
-#ifdef CONFIG_SMP
- int i;
-#endif
-
- /* truncate to 32 bit and sign extend all args */
- argv = (int *)(long)(int)fw_arg1;
- envp = (int *)(long)(int)fw_arg2;
- prom_infop = (struct psb_info *)(long)(int)fw_arg3;
-
- nlm_prom_info = *prom_infop;
- nlm_init_node();
-
- /* Update reset entry point with CPU init code */
- reset_vec = (void *)CKSEG1ADDR(RESET_VEC_PHYS);
- memset(reset_vec, 0, RESET_VEC_SIZE);
- memcpy(reset_vec, (void *)nlm_reset_entry,
- (nlm_reset_entry_end - nlm_reset_entry));
-
- build_arcs_cmdline(argv);
- prom_add_memory();
-
-#ifdef CONFIG_SMP
- for (i = 0; i < 32; i++)
- if (nlm_prom_info.online_cpu_map & (1 << i))
- cpumask_set_cpu(i, &nlm_cpumask);
- nlm_wakeup_secondary_cpus();
- register_smp_ops(&nlm_smp_ops);
-#endif
- xlr_board_info_setup();
- xlr_percpu_fmn_init();
-}
diff --git a/arch/mips/netlogic/xlr/wakeup.c b/arch/mips/netlogic/xlr/wakeup.c
deleted file mode 100644
index d61cba1e9c65..000000000000
--- a/arch/mips/netlogic/xlr/wakeup.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/delay.h>
-#include <linux/threads.h>
-
-#include <asm/asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/string.h>
-
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/common.h>
-#include <asm/netlogic/mips-extns.h>
-
-#include <asm/netlogic/xlr/iomap.h>
-#include <asm/netlogic/xlr/pic.h>
-
-int xlr_wakeup_secondary_cpus(void)
-{
- struct nlm_soc_info *nodep;
- unsigned int i, j, boot_cpu;
- volatile u32 *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY);
-
- /*
- * In case of RMI boot, hit with NMI to get the cores
- * from bootloader to linux code.
- */
- nodep = nlm_get_node(0);
- boot_cpu = hard_smp_processor_id();
- nlm_set_nmi_handler(nlm_rmiboot_preboot);
- for (i = 0; i < NR_CPUS; i++) {
- if (i == boot_cpu || !cpumask_test_cpu(i, &nlm_cpumask))
- continue;
- nlm_pic_send_ipi(nodep->picbase, i, 1, 1); /* send NMI */
- }
-
- /* Fill up the coremask early */
- nodep->coremask = 1;
- for (i = 1; i < nlm_cores_per_node(); i++) {
- for (j = 1000000; j > 0; j--) {
- if (cpu_ready[i * NLM_THREADS_PER_CORE])
- break;
- udelay(10);
- }
- if (j != 0)
- nodep->coremask |= (1u << i);
- else
- pr_err("Failed to wakeup core %d\n", i);
- }
-
- return 0;
-}
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index f3eecc065e5c..6ddefafd00cb 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -56,10 +56,7 @@ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
obj-$(CONFIG_CAVIUM_OCTEON_SOC) += pci-octeon.o pcie-octeon.o
-obj-$(CONFIG_CPU_XLR) += pci-xlr.o
-obj-$(CONFIG_CPU_XLP) += pci-xlp.o
ifdef CONFIG_PCI_MSI
obj-$(CONFIG_CAVIUM_OCTEON_SOC) += msi-octeon.o
-obj-$(CONFIG_CPU_XLP) += msi-xlp.o
endif
diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
deleted file mode 100644
index bb14335f804b..000000000000
--- a/arch/mips/pci/msi-xlp.c
+++ /dev/null
@@ -1,571 +0,0 @@
-/*
- * Copyright (c) 2003-2012 Broadcom Corporation
- * All Rights Reserved
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the Broadcom
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/msi.h>
-#include <linux/mm.h>
-#include <linux/irq.h>
-#include <linux/irqdesc.h>
-#include <linux/console.h>
-
-#include <asm/io.h>
-
-#include <asm/netlogic/interrupt.h>
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/common.h>
-#include <asm/netlogic/mips-extns.h>
-
-#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/xlp-hal/pic.h>
-#include <asm/netlogic/xlp-hal/pcibus.h>
-#include <asm/netlogic/xlp-hal/bridge.h>
-
-#define XLP_MSIVEC_PER_LINK 32
-#define XLP_MSIXVEC_TOTAL (cpu_is_xlp9xx() ? 128 : 32)
-#define XLP_MSIXVEC_PER_LINK (cpu_is_xlp9xx() ? 32 : 8)
-
-/* 128 MSI irqs per node, mapped starting at NLM_MSI_VEC_BASE */
-static inline int nlm_link_msiirq(int link, int msivec)
-{
- return NLM_MSI_VEC_BASE + link * XLP_MSIVEC_PER_LINK + msivec;
-}
-
-/* get the link MSI vector from irq number */
-static inline int nlm_irq_msivec(int irq)
-{
- return (irq - NLM_MSI_VEC_BASE) % XLP_MSIVEC_PER_LINK;
-}
-
-/* get the link from the irq number */
-static inline int nlm_irq_msilink(int irq)
-{
- int total_msivec = XLP_MSIVEC_PER_LINK * PCIE_NLINKS;
-
- return ((irq - NLM_MSI_VEC_BASE) % total_msivec) /
- XLP_MSIVEC_PER_LINK;
-}
-
-/*
- * For XLP 8xx/4xx/3xx/2xx, only 32 MSI-X vectors are possible because
- * there are only 32 PIC interrupts for MSI. We split them statically
- * and use 8 MSI-X vectors per link - this keeps the allocation and
- * lookup simple.
- * On XLP 9xx, there are 32 vectors per link, and the interrupts are
- * not routed thru PIC, so we can use all 128 MSI-X vectors.
- */
-static inline int nlm_link_msixirq(int link, int bit)
-{
- return NLM_MSIX_VEC_BASE + link * XLP_MSIXVEC_PER_LINK + bit;
-}
-
-/* get the link MSI vector from irq number */
-static inline int nlm_irq_msixvec(int irq)
-{
- return (irq - NLM_MSIX_VEC_BASE) % XLP_MSIXVEC_TOTAL;
-}
-
-/* get the link from MSIX vec */
-static inline int nlm_irq_msixlink(int msixvec)
-{
- return msixvec / XLP_MSIXVEC_PER_LINK;
-}
-
-/*
- * Per link MSI and MSI-X information, set as IRQ handler data for
- * MSI and MSI-X interrupts.
- */
-struct xlp_msi_data {
- struct nlm_soc_info *node;
- uint64_t lnkbase;
- uint32_t msi_enabled_mask;
- uint32_t msi_alloc_mask;
- uint32_t msix_alloc_mask;
- spinlock_t msi_lock;
-};
-
-/*
- * MSI Chip definitions
- *
- * On XLP, there is a PIC interrupt associated with each PCIe link on the
- * chip (which appears as a PCI bridge to us). This gives us 32 MSI irqa
- * per link and 128 overall.
- *
- * When a device connected to the link raises a MSI interrupt, we get a
- * link interrupt and we then have to look at PCIE_MSI_STATUS register at
- * the bridge to map it to the IRQ
- */
-static void xlp_msi_enable(struct irq_data *d)
-{
- struct xlp_msi_data *md = irq_data_get_irq_chip_data(d);
- unsigned long flags;
- int vec;
-
- vec = nlm_irq_msivec(d->irq);
- spin_lock_irqsave(&md->msi_lock, flags);
- md->msi_enabled_mask |= 1u << vec;
- if (cpu_is_xlp9xx())
- nlm_write_reg(md->lnkbase, PCIE_9XX_MSI_EN,
- md->msi_enabled_mask);
- else
- nlm_write_reg(md->lnkbase, PCIE_MSI_EN, md->msi_enabled_mask);
- spin_unlock_irqrestore(&md->msi_lock, flags);
-}
-
-static void xlp_msi_disable(struct irq_data *d)
-{
- struct xlp_msi_data *md = irq_data_get_irq_chip_data(d);
- unsigned long flags;
- int vec;
-
- vec = nlm_irq_msivec(d->irq);
- spin_lock_irqsave(&md->msi_lock, flags);
- md->msi_enabled_mask &= ~(1u << vec);
- if (cpu_is_xlp9xx())
- nlm_write_reg(md->lnkbase, PCIE_9XX_MSI_EN,
- md->msi_enabled_mask);
- else
- nlm_write_reg(md->lnkbase, PCIE_MSI_EN, md->msi_enabled_mask);
- spin_unlock_irqrestore(&md->msi_lock, flags);
-}
-
-static void xlp_msi_mask_ack(struct irq_data *d)
-{
- struct xlp_msi_data *md = irq_data_get_irq_chip_data(d);
- int link, vec;
-
- link = nlm_irq_msilink(d->irq);
- vec = nlm_irq_msivec(d->irq);
- xlp_msi_disable(d);
-
- /* Ack MSI on bridge */
- if (cpu_is_xlp9xx())
- nlm_write_reg(md->lnkbase, PCIE_9XX_MSI_STATUS, 1u << vec);
- else
- nlm_write_reg(md->lnkbase, PCIE_MSI_STATUS, 1u << vec);
-
-}
-
-static struct irq_chip xlp_msi_chip = {
- .name = "XLP-MSI",
- .irq_enable = xlp_msi_enable,
- .irq_disable = xlp_msi_disable,
- .irq_mask_ack = xlp_msi_mask_ack,
- .irq_unmask = xlp_msi_enable,
-};
-
-/*
- * XLP8XX/4XX/3XX/2XX:
- * The MSI-X interrupt handling is different from MSI, there are 32 MSI-X
- * interrupts generated by the PIC and each of these correspond to a MSI-X
- * vector (0-31) that can be assigned.
- *
- * We divide the MSI-X vectors to 8 per link and do a per-link allocation
- *
- * XLP9XX:
- * 32 MSI-X vectors are available per link, and the interrupts are not routed
- * thru the PIC. PIC ack not needed.
- *
- * Enable and disable done using standard MSI functions.
- */
-static void xlp_msix_mask_ack(struct irq_data *d)
-{
- struct xlp_msi_data *md;
- int link, msixvec;
- uint32_t status_reg, bit;
-
- msixvec = nlm_irq_msixvec(d->irq);
- link = nlm_irq_msixlink(msixvec);
- pci_msi_mask_irq(d);
- md = irq_data_get_irq_chip_data(d);
-
- /* Ack MSI on bridge */
- if (cpu_is_xlp9xx()) {
- status_reg = PCIE_9XX_MSIX_STATUSX(link);
- bit = msixvec % XLP_MSIXVEC_PER_LINK;
- } else {
- status_reg = PCIE_MSIX_STATUS;
- bit = msixvec;
- }
- nlm_write_reg(md->lnkbase, status_reg, 1u << bit);
-
- if (!cpu_is_xlp9xx())
- nlm_pic_ack(md->node->picbase,
- PIC_IRT_PCIE_MSIX_INDEX(msixvec));
-}
-
-static struct irq_chip xlp_msix_chip = {
- .name = "XLP-MSIX",
- .irq_enable = pci_msi_unmask_irq,
- .irq_disable = pci_msi_mask_irq,
- .irq_mask_ack = xlp_msix_mask_ack,
- .irq_unmask = pci_msi_unmask_irq,
-};
-
-void arch_teardown_msi_irq(unsigned int irq)
-{
-}
-
-/*
- * Setup a PCIe link for MSI. By default, the links are in
- * legacy interrupt mode. We will switch them to MSI mode
- * at the first MSI request.
- */
-static void xlp_config_link_msi(uint64_t lnkbase, int lirq, uint64_t msiaddr)
-{
- u32 val;
-
- if (cpu_is_xlp9xx()) {
- val = nlm_read_reg(lnkbase, PCIE_9XX_INT_EN0);
- if ((val & 0x200) == 0) {
- val |= 0x200; /* MSI Interrupt enable */
- nlm_write_reg(lnkbase, PCIE_9XX_INT_EN0, val);
- }
- } else {
- val = nlm_read_reg(lnkbase, PCIE_INT_EN0);
- if ((val & 0x200) == 0) {
- val |= 0x200;
- nlm_write_reg(lnkbase, PCIE_INT_EN0, val);
- }
- }
-
- val = nlm_read_reg(lnkbase, 0x1); /* CMD */
- if ((val & 0x0400) == 0) {
- val |= 0x0400;
- nlm_write_reg(lnkbase, 0x1, val);
- }
-
- /* Update IRQ in the PCI irq reg */
- val = nlm_read_pci_reg(lnkbase, 0xf);
- val &= ~0x1fu;
- val |= (1 << 8) | lirq;
- nlm_write_pci_reg(lnkbase, 0xf, val);
-
- /* MSI addr */
- nlm_write_reg(lnkbase, PCIE_BRIDGE_MSI_ADDRH, msiaddr >> 32);
- nlm_write_reg(lnkbase, PCIE_BRIDGE_MSI_ADDRL, msiaddr & 0xffffffff);
-
- /* MSI cap for bridge */
- val = nlm_read_reg(lnkbase, PCIE_BRIDGE_MSI_CAP);
- if ((val & (1 << 16)) == 0) {
- val |= 0xb << 16; /* mmc32, msi enable */
- nlm_write_reg(lnkbase, PCIE_BRIDGE_MSI_CAP, val);
- }
-}
-
-/*
- * Allocate a MSI vector on a link
- */
-static int xlp_setup_msi(uint64_t lnkbase, int node, int link,
- struct msi_desc *desc)
-{
- struct xlp_msi_data *md;
- struct msi_msg msg;
- unsigned long flags;
- int msivec, irt, lirq, xirq, ret;
- uint64_t msiaddr;
-
- /* Get MSI data for the link */
- lirq = PIC_PCIE_LINK_MSI_IRQ(link);
- xirq = nlm_irq_to_xirq(node, nlm_link_msiirq(link, 0));
- md = irq_get_chip_data(xirq);
- msiaddr = MSI_LINK_ADDR(node, link);
-
- spin_lock_irqsave(&md->msi_lock, flags);
- if (md->msi_alloc_mask == 0) {
- xlp_config_link_msi(lnkbase, lirq, msiaddr);
- /* switch the link IRQ to MSI range */
- if (cpu_is_xlp9xx())
- irt = PIC_9XX_IRT_PCIE_LINK_INDEX(link);
- else
- irt = PIC_IRT_PCIE_LINK_INDEX(link);
- nlm_setup_pic_irq(node, lirq, lirq, irt);
- nlm_pic_init_irt(nlm_get_node(node)->picbase, irt, lirq,
- node * nlm_threads_per_node(), 1 /*en */);
- }
-
- /* allocate a MSI vec, and tell the bridge about it */
- msivec = fls(md->msi_alloc_mask);
- if (msivec == XLP_MSIVEC_PER_LINK) {
- spin_unlock_irqrestore(&md->msi_lock, flags);
- return -ENOMEM;
- }
- md->msi_alloc_mask |= (1u << msivec);
- spin_unlock_irqrestore(&md->msi_lock, flags);
-
- msg.address_hi = msiaddr >> 32;
- msg.address_lo = msiaddr & 0xffffffff;
- msg.data = 0xc00 | msivec;
-
- xirq = xirq + msivec; /* msi mapped to global irq space */
- ret = irq_set_msi_desc(xirq, desc);
- if (ret < 0)
- return ret;
-
- pci_write_msi_msg(xirq, &msg);
- return 0;
-}
-
-/*
- * Switch a link to MSI-X mode
- */
-static void xlp_config_link_msix(uint64_t lnkbase, int lirq, uint64_t msixaddr)
-{
- u32 val;
-
- val = nlm_read_reg(lnkbase, 0x2C);
- if ((val & 0x80000000U) == 0) {
- val |= 0x80000000U;
- nlm_write_reg(lnkbase, 0x2C, val);
- }
-
- if (cpu_is_xlp9xx()) {
- val = nlm_read_reg(lnkbase, PCIE_9XX_INT_EN0);
- if ((val & 0x200) == 0) {
- val |= 0x200; /* MSI Interrupt enable */
- nlm_write_reg(lnkbase, PCIE_9XX_INT_EN0, val);
- }
- } else {
- val = nlm_read_reg(lnkbase, PCIE_INT_EN0);
- if ((val & 0x200) == 0) {
- val |= 0x200; /* MSI Interrupt enable */
- nlm_write_reg(lnkbase, PCIE_INT_EN0, val);
- }
- }
-
- val = nlm_read_reg(lnkbase, 0x1); /* CMD */
- if ((val & 0x0400) == 0) {
- val |= 0x0400;
- nlm_write_reg(lnkbase, 0x1, val);
- }
-
- /* Update IRQ in the PCI irq reg */
- val = nlm_read_pci_reg(lnkbase, 0xf);
- val &= ~0x1fu;
- val |= (1 << 8) | lirq;
- nlm_write_pci_reg(lnkbase, 0xf, val);
-
- if (cpu_is_xlp9xx()) {
- /* MSI-X addresses */
- nlm_write_reg(lnkbase, PCIE_9XX_BRIDGE_MSIX_ADDR_BASE,
- msixaddr >> 8);
- nlm_write_reg(lnkbase, PCIE_9XX_BRIDGE_MSIX_ADDR_LIMIT,
- (msixaddr + MSI_ADDR_SZ) >> 8);
- } else {
- /* MSI-X addresses */
- nlm_write_reg(lnkbase, PCIE_BRIDGE_MSIX_ADDR_BASE,
- msixaddr >> 8);
- nlm_write_reg(lnkbase, PCIE_BRIDGE_MSIX_ADDR_LIMIT,
- (msixaddr + MSI_ADDR_SZ) >> 8);
- }
-}
-
-/*
- * Allocate a MSI-X vector
- */
-static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
- struct msi_desc *desc)
-{
- struct xlp_msi_data *md;
- struct msi_msg msg;
- unsigned long flags;
- int t, msixvec, lirq, xirq, ret;
- uint64_t msixaddr;
-
- /* Get MSI data for the link */
- lirq = PIC_PCIE_MSIX_IRQ(link);
- xirq = nlm_irq_to_xirq(node, nlm_link_msixirq(link, 0));
- md = irq_get_chip_data(xirq);
- msixaddr = MSIX_LINK_ADDR(node, link);
-
- spin_lock_irqsave(&md->msi_lock, flags);
- /* switch the PCIe link to MSI-X mode at the first alloc */
- if (md->msix_alloc_mask == 0)
- xlp_config_link_msix(lnkbase, lirq, msixaddr);
-
- /* allocate a MSI-X vec, and tell the bridge about it */
- t = fls(md->msix_alloc_mask);
- if (t == XLP_MSIXVEC_PER_LINK) {
- spin_unlock_irqrestore(&md->msi_lock, flags);
- return -ENOMEM;
- }
- md->msix_alloc_mask |= (1u << t);
- spin_unlock_irqrestore(&md->msi_lock, flags);
-
- xirq += t;
- msixvec = nlm_irq_msixvec(xirq);
-
- msg.address_hi = msixaddr >> 32;
- msg.address_lo = msixaddr & 0xffffffff;
- msg.data = 0xc00 | msixvec;
-
- ret = irq_set_msi_desc(xirq, desc);
- if (ret < 0)
- return ret;
-
- pci_write_msi_msg(xirq, &msg);
- return 0;
-}
-
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
-{
- struct pci_dev *lnkdev;
- uint64_t lnkbase;
- int node, link, slot;
-
- lnkdev = xlp_get_pcie_link(dev);
- if (lnkdev == NULL) {
- dev_err(&dev->dev, "Could not find bridge\n");
- return 1;
- }
- slot = PCI_SLOT(lnkdev->devfn);
- link = PCI_FUNC(lnkdev->devfn);
- node = slot / 8;
- lnkbase = nlm_get_pcie_base(node, link);
-
- if (desc->msi_attrib.is_msix)
- return xlp_setup_msix(lnkbase, node, link, desc);
- else
- return xlp_setup_msi(lnkbase, node, link, desc);
-}
-
-void __init xlp_init_node_msi_irqs(int node, int link)
-{
- struct nlm_soc_info *nodep;
- struct xlp_msi_data *md;
- int irq, i, irt, msixvec, val;
-
- pr_info("[%d %d] Init node PCI IRT\n", node, link);
- nodep = nlm_get_node(node);
-
- /* Alloc an MSI block for the link */
- md = kzalloc(sizeof(*md), GFP_KERNEL);
- spin_lock_init(&md->msi_lock);
- md->msi_enabled_mask = 0;
- md->msi_alloc_mask = 0;
- md->msix_alloc_mask = 0;
- md->node = nodep;
- md->lnkbase = nlm_get_pcie_base(node, link);
-
- /* extended space for MSI interrupts */
- irq = nlm_irq_to_xirq(node, nlm_link_msiirq(link, 0));
- for (i = irq; i < irq + XLP_MSIVEC_PER_LINK; i++) {
- irq_set_chip_and_handler(i, &xlp_msi_chip, handle_level_irq);
- irq_set_chip_data(i, md);
- }
-
- for (i = 0; i < XLP_MSIXVEC_PER_LINK ; i++) {
- if (cpu_is_xlp9xx()) {
- val = ((node * nlm_threads_per_node()) << 7 |
- PIC_PCIE_MSIX_IRQ(link) << 1 | 0 << 0);
- nlm_write_pcie_reg(md->lnkbase, PCIE_9XX_MSIX_VECX(i +
- (link * XLP_MSIXVEC_PER_LINK)), val);
- } else {
- /* Initialize MSI-X irts to generate one interrupt
- * per link
- */
- msixvec = link * XLP_MSIXVEC_PER_LINK + i;
- irt = PIC_IRT_PCIE_MSIX_INDEX(msixvec);
- nlm_pic_init_irt(nodep->picbase, irt,
- PIC_PCIE_MSIX_IRQ(link),
- node * nlm_threads_per_node(), 1);
- }
-
- /* Initialize MSI-X extended irq space for the link */
- irq = nlm_irq_to_xirq(node, nlm_link_msixirq(link, i));
- irq_set_chip_and_handler(irq, &xlp_msix_chip, handle_level_irq);
- irq_set_chip_data(irq, md);
- }
-}
-
-void nlm_dispatch_msi(int node, int lirq)
-{
- struct xlp_msi_data *md;
- int link, i, irqbase;
- u32 status;
-
- link = lirq - PIC_PCIE_LINK_MSI_IRQ_BASE;
- irqbase = nlm_irq_to_xirq(node, nlm_link_msiirq(link, 0));
- md = irq_get_chip_data(irqbase);
- if (cpu_is_xlp9xx())
- status = nlm_read_reg(md->lnkbase, PCIE_9XX_MSI_STATUS) &
- md->msi_enabled_mask;
- else
- status = nlm_read_reg(md->lnkbase, PCIE_MSI_STATUS) &
- md->msi_enabled_mask;
- while (status) {
- i = __ffs(status);
- do_IRQ(irqbase + i);
- status &= status - 1;
- }
-
- /* Ack at eirr and PIC */
- ack_c0_eirr(PIC_PCIE_LINK_MSI_IRQ(link));
- if (cpu_is_xlp9xx())
- nlm_pic_ack(md->node->picbase,
- PIC_9XX_IRT_PCIE_LINK_INDEX(link));
- else
- nlm_pic_ack(md->node->picbase, PIC_IRT_PCIE_LINK_INDEX(link));
-}
-
-void nlm_dispatch_msix(int node, int lirq)
-{
- struct xlp_msi_data *md;
- int link, i, irqbase;
- u32 status;
-
- link = lirq - PIC_PCIE_MSIX_IRQ_BASE;
- irqbase = nlm_irq_to_xirq(node, nlm_link_msixirq(link, 0));
- md = irq_get_chip_data(irqbase);
- if (cpu_is_xlp9xx())
- status = nlm_read_reg(md->lnkbase, PCIE_9XX_MSIX_STATUSX(link));
- else
- status = nlm_read_reg(md->lnkbase, PCIE_MSIX_STATUS);
-
- /* narrow it down to the MSI-x vectors for our link */
- if (!cpu_is_xlp9xx())
- status = (status >> (link * XLP_MSIXVEC_PER_LINK)) &
- ((1 << XLP_MSIXVEC_PER_LINK) - 1);
-
- while (status) {
- i = __ffs(status);
- do_IRQ(irqbase + i);
- status &= status - 1;
- }
- /* Ack at eirr and PIC */
- ack_c0_eirr(PIC_PCIE_MSIX_IRQ(link));
-}
diff --git a/arch/mips/pci/pci-xlp.c b/arch/mips/pci/pci-xlp.c
deleted file mode 100644
index 9eff9137f78e..000000000000
--- a/arch/mips/pci/pci-xlp.c
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * Copyright (c) 2003-2012 Broadcom Corporation
- * All Rights Reserved
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the Broadcom
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/msi.h>
-#include <linux/mm.h>
-#include <linux/irq.h>
-#include <linux/irqdesc.h>
-#include <linux/console.h>
-
-#include <asm/io.h>
-
-#include <asm/netlogic/interrupt.h>
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/common.h>
-#include <asm/netlogic/mips-extns.h>
-
-#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/xlp-hal/pic.h>
-#include <asm/netlogic/xlp-hal/pcibus.h>
-#include <asm/netlogic/xlp-hal/bridge.h>
-
-static void *pci_config_base;
-
-#define pci_cfg_addr(bus, devfn, off) (((bus) << 20) | ((devfn) << 12) | (off))
-
-/* PCI ops */
-static inline u32 pci_cfg_read_32bit(struct pci_bus *bus, unsigned int devfn,
- int where)
-{
- u32 data;
- u32 *cfgaddr;
-
- where &= ~3;
- if (cpu_is_xlp9xx()) {
- /* be very careful on SoC buses */
- if (bus->number == 0) {
- /* Scan only existing nodes - uboot bug? */
- if (PCI_SLOT(devfn) != 0 ||
- !nlm_node_present(PCI_FUNC(devfn)))
- return 0xffffffff;
- } else if (bus->parent->number == 0) { /* SoC bus */
- if (PCI_SLOT(devfn) == 0) /* b.0.0 hangs */
- return 0xffffffff;
- if (devfn == 44) /* b.5.4 hangs */
- return 0xffffffff;
- }
- } else if (bus->number == 0 && PCI_SLOT(devfn) == 1 && where == 0x954) {
- return 0xffffffff;
- }
- cfgaddr = (u32 *)(pci_config_base +
- pci_cfg_addr(bus->number, devfn, where));
- data = *cfgaddr;
- return data;
-}
-
-static inline void pci_cfg_write_32bit(struct pci_bus *bus, unsigned int devfn,
- int where, u32 data)
-{
- u32 *cfgaddr;
-
- cfgaddr = (u32 *)(pci_config_base +
- pci_cfg_addr(bus->number, devfn, where & ~3));
- *cfgaddr = data;
-}
-
-static int nlm_pcibios_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- u32 data;
-
- if ((size == 2) && (where & 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
- else if ((size == 4) && (where & 3))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- data = pci_cfg_read_32bit(bus, devfn, where);
-
- if (size == 1)
- *val = (data >> ((where & 3) << 3)) & 0xff;
- else if (size == 2)
- *val = (data >> ((where & 3) << 3)) & 0xffff;
- else
- *val = data;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-
-static int nlm_pcibios_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- u32 data;
-
- if ((size == 2) && (where & 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
- else if ((size == 4) && (where & 3))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- data = pci_cfg_read_32bit(bus, devfn, where);
-
- if (size == 1)
- data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- else if (size == 2)
- data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- else
- data = val;
-
- pci_cfg_write_32bit(bus, devfn, where, data);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops nlm_pci_ops = {
- .read = nlm_pcibios_read,
- .write = nlm_pcibios_write
-};
-
-static struct resource nlm_pci_mem_resource = {
- .name = "XLP PCI MEM",
- .start = 0xd0000000UL, /* 256MB PCI mem @ 0xd000_0000 */
- .end = 0xdfffffffUL,
- .flags = IORESOURCE_MEM,
-};
-
-static struct resource nlm_pci_io_resource = {
- .name = "XLP IO MEM",
- .start = 0x14000000UL, /* 64MB PCI IO @ 0x1000_0000 */
- .end = 0x17ffffffUL,
- .flags = IORESOURCE_IO,
-};
-
-struct pci_controller nlm_pci_controller = {
- .index = 0,
- .pci_ops = &nlm_pci_ops,
- .mem_resource = &nlm_pci_mem_resource,
- .mem_offset = 0x00000000UL,
- .io_resource = &nlm_pci_io_resource,
- .io_offset = 0x00000000UL,
-};
-
-struct pci_dev *xlp_get_pcie_link(const struct pci_dev *dev)
-{
- struct pci_bus *bus, *p;
-
- bus = dev->bus;
-
- if (cpu_is_xlp9xx()) {
- /* find bus with grand parent number == 0 */
- for (p = bus->parent; p && p->parent && p->parent->number != 0;
- p = p->parent)
- bus = p;
- return (p && p->parent) ? bus->self : NULL;
- } else {
- /* Find the bridge on bus 0 */
- for (p = bus->parent; p && p->number != 0; p = p->parent)
- bus = p;
-
- return p ? bus->self : NULL;
- }
-}
-
-int xlp_socdev_to_node(const struct pci_dev *lnkdev)
-{
- if (cpu_is_xlp9xx())
- return PCI_FUNC(lnkdev->bus->self->devfn);
- else
- return PCI_SLOT(lnkdev->devfn) / 8;
-}
-
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- struct pci_dev *lnkdev;
- int lnkfunc, node;
-
- /*
- * For XLP PCIe, there is an IRQ per Link, find out which
- * link the device is on to assign interrupts
- */
- lnkdev = xlp_get_pcie_link(dev);
- if (lnkdev == NULL)
- return 0;
-
- lnkfunc = PCI_FUNC(lnkdev->devfn);
- node = xlp_socdev_to_node(lnkdev);
-
- return nlm_irq_to_xirq(node, PIC_PCIE_LINK_LEGACY_IRQ(lnkfunc));
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
-
-/*
- * If big-endian, enable hardware byteswap on the PCIe bridges.
- * This will make both the SoC and PCIe devices behave consistently with
- * readl/writel.
- */
-#ifdef __BIG_ENDIAN
-static void xlp_config_pci_bswap(int node, int link)
-{
- uint64_t nbubase, lnkbase;
- u32 reg;
-
- nbubase = nlm_get_bridge_regbase(node);
- lnkbase = nlm_get_pcie_base(node, link);
-
- /*
- * Enable byte swap in hardware. Program each link's PCIe SWAP regions
- * from the link's address ranges.
- */
- if (cpu_is_xlp9xx()) {
- reg = nlm_read_bridge_reg(nbubase,
- BRIDGE_9XX_PCIEMEM_BASE0 + link);
- nlm_write_pci_reg(lnkbase, PCIE_9XX_BYTE_SWAP_MEM_BASE, reg);
-
- reg = nlm_read_bridge_reg(nbubase,
- BRIDGE_9XX_PCIEMEM_LIMIT0 + link);
- nlm_write_pci_reg(lnkbase,
- PCIE_9XX_BYTE_SWAP_MEM_LIM, reg | 0xfff);
-
- reg = nlm_read_bridge_reg(nbubase,
- BRIDGE_9XX_PCIEIO_BASE0 + link);
- nlm_write_pci_reg(lnkbase, PCIE_9XX_BYTE_SWAP_IO_BASE, reg);
-
- reg = nlm_read_bridge_reg(nbubase,
- BRIDGE_9XX_PCIEIO_LIMIT0 + link);
- nlm_write_pci_reg(lnkbase,
- PCIE_9XX_BYTE_SWAP_IO_LIM, reg | 0xfff);
- } else {
- reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEMEM_BASE0 + link);
- nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_MEM_BASE, reg);
-
- reg = nlm_read_bridge_reg(nbubase,
- BRIDGE_PCIEMEM_LIMIT0 + link);
- nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_MEM_LIM, reg | 0xfff);
-
- reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEIO_BASE0 + link);
- nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_IO_BASE, reg);
-
- reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEIO_LIMIT0 + link);
- nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_IO_LIM, reg | 0xfff);
- }
-}
-#else
-/* Swap configuration not needed in little-endian mode */
-static inline void xlp_config_pci_bswap(int node, int link) {}
-#endif /* __BIG_ENDIAN */
-
-static int __init pcibios_init(void)
-{
- uint64_t pciebase;
- int link, n;
- u32 reg;
-
- /* Firmware assigns PCI resources */
- pci_set_flags(PCI_PROBE_ONLY);
- pci_config_base = ioremap(XLP_DEFAULT_PCI_ECFG_BASE, 64 << 20);
-
- /* Extend IO port for memory mapped io */
- ioport_resource.start = 0;
- ioport_resource.end = ~0;
-
- for (n = 0; n < NLM_NR_NODES; n++) {
- if (!nlm_node_present(n))
- continue;
-
- for (link = 0; link < PCIE_NLINKS; link++) {
- pciebase = nlm_get_pcie_base(n, link);
- if (nlm_read_pci_reg(pciebase, 0) == 0xffffffff)
- continue;
- xlp_config_pci_bswap(n, link);
- xlp_init_node_msi_irqs(n, link);
-
- /* put in intpin and irq - u-boot does not */
- reg = nlm_read_pci_reg(pciebase, 0xf);
- reg &= ~0x1ffu;
- reg |= (1 << 8) | PIC_PCIE_LINK_LEGACY_IRQ(link);
- nlm_write_pci_reg(pciebase, 0xf, reg);
- pr_info("XLP PCIe: Link %d-%d initialized.\n", n, link);
- }
- }
-
- set_io_port_base(CKSEG1);
- nlm_pci_controller.io_map_base = CKSEG1;
-
- register_pci_controller(&nlm_pci_controller);
- pr_info("XLP PCIe Controller %pR%pR.\n", &nlm_pci_io_resource,
- &nlm_pci_mem_resource);
-
- return 0;
-}
-arch_initcall(pcibios_init);
diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
deleted file mode 100644
index 2a1c81a129ba..000000000000
--- a/arch/mips/pci/pci-xlr.c
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/msi.h>
-#include <linux/mm.h>
-#include <linux/irq.h>
-#include <linux/irqdesc.h>
-#include <linux/console.h>
-#include <linux/pci_regs.h>
-
-#include <asm/io.h>
-
-#include <asm/netlogic/interrupt.h>
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/common.h>
-
-#include <asm/netlogic/xlr/msidef.h>
-#include <asm/netlogic/xlr/iomap.h>
-#include <asm/netlogic/xlr/pic.h>
-#include <asm/netlogic/xlr/xlr.h>
-
-static void *pci_config_base;
-
-#define pci_cfg_addr(bus, devfn, off) (((bus) << 16) | ((devfn) << 8) | (off))
-
-/* PCI ops */
-static inline u32 pci_cfg_read_32bit(struct pci_bus *bus, unsigned int devfn,
- int where)
-{
- u32 data;
- u32 *cfgaddr;
-
- cfgaddr = (u32 *)(pci_config_base +
- pci_cfg_addr(bus->number, devfn, where & ~3));
- data = *cfgaddr;
- return cpu_to_le32(data);
-}
-
-static inline void pci_cfg_write_32bit(struct pci_bus *bus, unsigned int devfn,
- int where, u32 data)
-{
- u32 *cfgaddr;
-
- cfgaddr = (u32 *)(pci_config_base +
- pci_cfg_addr(bus->number, devfn, where & ~3));
- *cfgaddr = cpu_to_le32(data);
-}
-
-static int nlm_pcibios_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- u32 data;
-
- if ((size == 2) && (where & 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
- else if ((size == 4) && (where & 3))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- data = pci_cfg_read_32bit(bus, devfn, where);
-
- if (size == 1)
- *val = (data >> ((where & 3) << 3)) & 0xff;
- else if (size == 2)
- *val = (data >> ((where & 3) << 3)) & 0xffff;
- else
- *val = data;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-
-static int nlm_pcibios_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- u32 data;
-
- if ((size == 2) && (where & 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
- else if ((size == 4) && (where & 3))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- data = pci_cfg_read_32bit(bus, devfn, where);
-
- if (size == 1)
- data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- else if (size == 2)
- data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- else
- data = val;
-
- pci_cfg_write_32bit(bus, devfn, where, data);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops nlm_pci_ops = {
- .read = nlm_pcibios_read,
- .write = nlm_pcibios_write
-};
-
-static struct resource nlm_pci_mem_resource = {
- .name = "XLR PCI MEM",
- .start = 0xd0000000UL, /* 256MB PCI mem @ 0xd000_0000 */
- .end = 0xdfffffffUL,
- .flags = IORESOURCE_MEM,
-};
-
-static struct resource nlm_pci_io_resource = {
- .name = "XLR IO MEM",
- .start = 0x10000000UL, /* 16MB PCI IO @ 0x1000_0000 */
- .end = 0x100fffffUL,
- .flags = IORESOURCE_IO,
-};
-
-struct pci_controller nlm_pci_controller = {
- .index = 0,
- .pci_ops = &nlm_pci_ops,
- .mem_resource = &nlm_pci_mem_resource,
- .mem_offset = 0x00000000UL,
- .io_resource = &nlm_pci_io_resource,
- .io_offset = 0x00000000UL,
-};
-
-/*
- * The top level PCIe links on the XLS PCIe controller appear as
- * bridges. Given a device, this function finds which link it is
- * on.
- */
-static struct pci_dev *xls_get_pcie_link(const struct pci_dev *dev)
-{
- struct pci_bus *bus, *p;
-
- /* Find the bridge on bus 0 */
- bus = dev->bus;
- for (p = bus->parent; p && p->number != 0; p = p->parent)
- bus = p;
-
- return p ? bus->self : NULL;
-}
-
-static int nlm_pci_link_to_irq(int link)
-{
- switch (link) {
- case 0:
- return PIC_PCIE_LINK0_IRQ;
- case 1:
- return PIC_PCIE_LINK1_IRQ;
- case 2:
- if (nlm_chip_is_xls_b())
- return PIC_PCIE_XLSB0_LINK2_IRQ;
- else
- return PIC_PCIE_LINK2_IRQ;
- case 3:
- if (nlm_chip_is_xls_b())
- return PIC_PCIE_XLSB0_LINK3_IRQ;
- else
- return PIC_PCIE_LINK3_IRQ;
- }
- WARN(1, "Unexpected link %d\n", link);
- return 0;
-}
-
-static int get_irq_vector(const struct pci_dev *dev)
-{
- struct pci_dev *lnk;
- int link;
-
- if (!nlm_chip_is_xls())
- return PIC_PCIX_IRQ; /* for XLR just one IRQ */
-
- lnk = xls_get_pcie_link(dev);
- if (lnk == NULL)
- return 0;
-
- link = PCI_SLOT(lnk->devfn);
- return nlm_pci_link_to_irq(link);
-}
-
-#ifdef CONFIG_PCI_MSI
-void arch_teardown_msi_irq(unsigned int irq)
-{
-}
-
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
-{
- struct msi_msg msg;
- struct pci_dev *lnk;
- int irq, ret;
- u16 val;
-
- /* MSI not supported on XLR */
- if (!nlm_chip_is_xls())
- return 1;
-
- /*
- * Enable MSI on the XLS PCIe controller bridge which was disabled
- * at enumeration, the bridge MSI capability is at 0x50
- */
- lnk = xls_get_pcie_link(dev);
- if (lnk == NULL)
- return 1;
-
- pci_read_config_word(lnk, 0x50 + PCI_MSI_FLAGS, &val);
- if ((val & PCI_MSI_FLAGS_ENABLE) == 0) {
- val |= PCI_MSI_FLAGS_ENABLE;
- pci_write_config_word(lnk, 0x50 + PCI_MSI_FLAGS, val);
- }
-
- irq = get_irq_vector(dev);
- if (irq <= 0)
- return 1;
-
- msg.address_hi = MSI_ADDR_BASE_HI;
- msg.address_lo = MSI_ADDR_BASE_LO |
- MSI_ADDR_DEST_MODE_PHYSICAL |
- MSI_ADDR_REDIRECTION_CPU;
-
- msg.data = MSI_DATA_TRIGGER_EDGE |
- MSI_DATA_LEVEL_ASSERT |
- MSI_DATA_DELIVERY_FIXED;
-
- ret = irq_set_msi_desc(irq, desc);
- if (ret < 0)
- return ret;
-
- pci_write_msi_msg(irq, &msg);
- return 0;
-}
-#endif
-
-/* Extra ACK needed for XLR on chip PCI controller */
-static void xlr_pci_ack(struct irq_data *d)
-{
- uint64_t pcibase = nlm_mmio_base(NETLOGIC_IO_PCIX_OFFSET);
-
- nlm_read_reg(pcibase, (0x140 >> 2));
-}
-
-/* Extra ACK needed for XLS on chip PCIe controller */
-static void xls_pcie_ack(struct irq_data *d)
-{
- uint64_t pciebase_le = nlm_mmio_base(NETLOGIC_IO_PCIE_1_OFFSET);
-
- switch (d->irq) {
- case PIC_PCIE_LINK0_IRQ:
- nlm_write_reg(pciebase_le, (0x90 >> 2), 0xffffffff);
- break;
- case PIC_PCIE_LINK1_IRQ:
- nlm_write_reg(pciebase_le, (0x94 >> 2), 0xffffffff);
- break;
- case PIC_PCIE_LINK2_IRQ:
- nlm_write_reg(pciebase_le, (0x190 >> 2), 0xffffffff);
- break;
- case PIC_PCIE_LINK3_IRQ:
- nlm_write_reg(pciebase_le, (0x194 >> 2), 0xffffffff);
- break;
- }
-}
-
-/* For XLS B silicon, the 3,4 PCI interrupts are different */
-static void xls_pcie_ack_b(struct irq_data *d)
-{
- uint64_t pciebase_le = nlm_mmio_base(NETLOGIC_IO_PCIE_1_OFFSET);
-
- switch (d->irq) {
- case PIC_PCIE_LINK0_IRQ:
- nlm_write_reg(pciebase_le, (0x90 >> 2), 0xffffffff);
- break;
- case PIC_PCIE_LINK1_IRQ:
- nlm_write_reg(pciebase_le, (0x94 >> 2), 0xffffffff);
- break;
- case PIC_PCIE_XLSB0_LINK2_IRQ:
- nlm_write_reg(pciebase_le, (0x190 >> 2), 0xffffffff);
- break;
- case PIC_PCIE_XLSB0_LINK3_IRQ:
- nlm_write_reg(pciebase_le, (0x194 >> 2), 0xffffffff);
- break;
- }
-}
-
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- return get_irq_vector(dev);
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
-
-static int __init pcibios_init(void)
-{
- void (*extra_ack)(struct irq_data *);
- int link, irq;
-
- /* PSB assigns PCI resources */
- pci_set_flags(PCI_PROBE_ONLY);
- pci_config_base = ioremap(DEFAULT_PCI_CONFIG_BASE, 16 << 20);
-
- /* Extend IO port for memory mapped io */
- ioport_resource.start = 0;
- ioport_resource.end = ~0;
-
- set_io_port_base(CKSEG1);
- nlm_pci_controller.io_map_base = CKSEG1;
-
- pr_info("Registering XLR/XLS PCIX/PCIE Controller.\n");
- register_pci_controller(&nlm_pci_controller);
-
- /*
- * For PCI interrupts, we need to ack the PCI controller too, overload
- * irq handler data to do this
- */
- if (!nlm_chip_is_xls()) {
- /* XLR PCI controller ACK */
- nlm_set_pic_extra_ack(0, PIC_PCIX_IRQ, xlr_pci_ack);
- } else {
- if (nlm_chip_is_xls_b())
- extra_ack = xls_pcie_ack_b;
- else
- extra_ack = xls_pcie_ack;
- for (link = 0; link < 4; link++) {
- irq = nlm_pci_link_to_irq(link);
- nlm_set_pic_extra_ack(0, irq, extra_ack);
- }
- }
- return 0;
-}
-
-arch_initcall(pcibios_init);
--
2.29.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] MIPS: Remove NETLOGIC support
2021-10-20 12:49 [PATCH] MIPS: Remove NETLOGIC support Thomas Bogendoerfer
@ 2021-10-24 15:26 ` Thomas Bogendoerfer
0 siblings, 0 replies; 2+ messages in thread
From: Thomas Bogendoerfer @ 2021-10-24 15:26 UTC (permalink / raw)
To: Rob Herring, Peter Zijlstra, Ingo Molnar,
Arnaldo Carvalho de Melo, Mark Rutland, Alexander Shishkin,
Jiri Olsa, Namhyung Kim, Huacai Chen, Aleksandar Markovic,
linux-mips, linux-kernel, devicetree, linux-perf-users, kvm
On Wed, Oct 20, 2021 at 02:49:13PM +0200, Thomas Bogendoerfer wrote:
> No (active) developer owns this hardware, so let's remove Linux support.
>
> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> ---
> arch/mips/Kbuild.platforms | 1 -
> arch/mips/Kconfig | 91 +--
> arch/mips/boot/compressed/uart-16550.c | 12 -
> arch/mips/boot/dts/Makefile | 1 -
> arch/mips/boot/dts/netlogic/Makefile | 8 -
> arch/mips/boot/dts/netlogic/xlp_evp.dts | 131 ----
> arch/mips/boot/dts/netlogic/xlp_fvp.dts | 131 ----
> arch/mips/boot/dts/netlogic/xlp_gvp.dts | 89 ---
> arch/mips/boot/dts/netlogic/xlp_rvp.dts | 89 ---
> arch/mips/boot/dts/netlogic/xlp_svp.dts | 131 ----
> arch/mips/configs/nlm_xlp_defconfig | 557 -----------------
> arch/mips/configs/nlm_xlr_defconfig | 508 ----------------
> arch/mips/include/asm/cop2.h | 11 -
> arch/mips/include/asm/cpu-type.h | 8 -
> arch/mips/include/asm/cpu.h | 2 +-
> arch/mips/include/asm/hazards.h | 2 +-
> .../asm/mach-netlogic/cpu-feature-overrides.h | 57 --
> arch/mips/include/asm/mach-netlogic/irq.h | 17 -
> .../include/asm/mach-netlogic/multi-node.h | 74 ---
> arch/mips/include/asm/netlogic/common.h | 132 ----
> arch/mips/include/asm/netlogic/haldefs.h | 171 ------
> arch/mips/include/asm/netlogic/interrupt.h | 45 --
> arch/mips/include/asm/netlogic/mips-extns.h | 301 ---------
> arch/mips/include/asm/netlogic/psb-bootinfo.h | 95 ---
> .../include/asm/netlogic/xlp-hal/bridge.h | 186 ------
> .../include/asm/netlogic/xlp-hal/cpucontrol.h | 89 ---
> .../mips/include/asm/netlogic/xlp-hal/iomap.h | 214 -------
> .../include/asm/netlogic/xlp-hal/pcibus.h | 113 ----
> arch/mips/include/asm/netlogic/xlp-hal/pic.h | 366 -----------
> arch/mips/include/asm/netlogic/xlp-hal/sys.h | 213 -------
> arch/mips/include/asm/netlogic/xlp-hal/uart.h | 192 ------
> arch/mips/include/asm/netlogic/xlp-hal/xlp.h | 119 ----
> arch/mips/include/asm/netlogic/xlr/bridge.h | 104 ----
> arch/mips/include/asm/netlogic/xlr/flash.h | 55 --
> arch/mips/include/asm/netlogic/xlr/fmn.h | 365 -----------
> arch/mips/include/asm/netlogic/xlr/gpio.h | 74 ---
> arch/mips/include/asm/netlogic/xlr/iomap.h | 109 ----
> arch/mips/include/asm/netlogic/xlr/msidef.h | 84 ---
> arch/mips/include/asm/netlogic/xlr/pic.h | 306 ----------
> arch/mips/include/asm/netlogic/xlr/xlr.h | 59 --
> arch/mips/include/asm/processor.h | 13 -
> arch/mips/include/asm/vermagic.h | 4 -
> arch/mips/kernel/cpu-probe.c | 84 ---
> arch/mips/kernel/idle.c | 2 -
> arch/mips/kernel/perf_event_mipsxx.c | 86 ---
> arch/mips/kvm/entry.c | 8 +-
> arch/mips/mm/c-r4k.c | 2 -
> arch/mips/mm/tlbex.c | 9 +-
> arch/mips/netlogic/Kconfig | 86 ---
> arch/mips/netlogic/Makefile | 4 -
> arch/mips/netlogic/Platform | 16 -
> arch/mips/netlogic/common/Makefile | 5 -
> arch/mips/netlogic/common/earlycons.c | 63 --
> arch/mips/netlogic/common/irq.c | 350 -----------
> arch/mips/netlogic/common/reset.S | 299 ---------
> arch/mips/netlogic/common/smp.c | 285 ---------
> arch/mips/netlogic/common/smpboot.S | 141 -----
> arch/mips/netlogic/common/time.c | 110 ----
> arch/mips/netlogic/xlp/Makefile | 11 -
> arch/mips/netlogic/xlp/ahci-init-xlp2.c | 390 ------------
> arch/mips/netlogic/xlp/ahci-init.c | 209 -------
> arch/mips/netlogic/xlp/cop2-ex.c | 121 ----
> arch/mips/netlogic/xlp/dt.c | 95 ---
> arch/mips/netlogic/xlp/nlm_hal.c | 508 ----------------
> arch/mips/netlogic/xlp/setup.c | 174 ------
> arch/mips/netlogic/xlp/usb-init-xlp2.c | 288 ---------
> arch/mips/netlogic/xlp/usb-init.c | 149 -----
> arch/mips/netlogic/xlp/wakeup.c | 212 -------
> arch/mips/netlogic/xlr/Makefile | 3 -
> arch/mips/netlogic/xlr/fmn-config.c | 296 ---------
> arch/mips/netlogic/xlr/fmn.c | 199 ------
> arch/mips/netlogic/xlr/platform-flash.c | 216 -------
> arch/mips/netlogic/xlr/platform.c | 250 --------
> arch/mips/netlogic/xlr/setup.c | 206 -------
> arch/mips/netlogic/xlr/wakeup.c | 85 ---
> arch/mips/pci/Makefile | 3 -
> arch/mips/pci/msi-xlp.c | 571 ------------------
> arch/mips/pci/pci-xlp.c | 332 ----------
> arch/mips/pci/pci-xlr.c | 368 -----------
> 79 files changed, 6 insertions(+), 11559 deletions(-)
> delete mode 100644 arch/mips/boot/dts/netlogic/Makefile
> delete mode 100644 arch/mips/boot/dts/netlogic/xlp_evp.dts
> delete mode 100644 arch/mips/boot/dts/netlogic/xlp_fvp.dts
> delete mode 100644 arch/mips/boot/dts/netlogic/xlp_gvp.dts
> delete mode 100644 arch/mips/boot/dts/netlogic/xlp_rvp.dts
> delete mode 100644 arch/mips/boot/dts/netlogic/xlp_svp.dts
> delete mode 100644 arch/mips/configs/nlm_xlp_defconfig
> delete mode 100644 arch/mips/configs/nlm_xlr_defconfig
> delete mode 100644 arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h
> delete mode 100644 arch/mips/include/asm/mach-netlogic/irq.h
> delete mode 100644 arch/mips/include/asm/mach-netlogic/multi-node.h
> delete mode 100644 arch/mips/include/asm/netlogic/common.h
> delete mode 100644 arch/mips/include/asm/netlogic/haldefs.h
> delete mode 100644 arch/mips/include/asm/netlogic/interrupt.h
> delete mode 100644 arch/mips/include/asm/netlogic/mips-extns.h
> delete mode 100644 arch/mips/include/asm/netlogic/psb-bootinfo.h
> delete mode 100644 arch/mips/include/asm/netlogic/xlp-hal/bridge.h
> delete mode 100644 arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h
> delete mode 100644 arch/mips/include/asm/netlogic/xlp-hal/iomap.h
> delete mode 100644 arch/mips/include/asm/netlogic/xlp-hal/pcibus.h
> delete mode 100644 arch/mips/include/asm/netlogic/xlp-hal/pic.h
> delete mode 100644 arch/mips/include/asm/netlogic/xlp-hal/sys.h
> delete mode 100644 arch/mips/include/asm/netlogic/xlp-hal/uart.h
> delete mode 100644 arch/mips/include/asm/netlogic/xlp-hal/xlp.h
> delete mode 100644 arch/mips/include/asm/netlogic/xlr/bridge.h
> delete mode 100644 arch/mips/include/asm/netlogic/xlr/flash.h
> delete mode 100644 arch/mips/include/asm/netlogic/xlr/fmn.h
> delete mode 100644 arch/mips/include/asm/netlogic/xlr/gpio.h
> delete mode 100644 arch/mips/include/asm/netlogic/xlr/iomap.h
> delete mode 100644 arch/mips/include/asm/netlogic/xlr/msidef.h
> delete mode 100644 arch/mips/include/asm/netlogic/xlr/pic.h
> delete mode 100644 arch/mips/include/asm/netlogic/xlr/xlr.h
> delete mode 100644 arch/mips/netlogic/Kconfig
> delete mode 100644 arch/mips/netlogic/Makefile
> delete mode 100644 arch/mips/netlogic/Platform
> delete mode 100644 arch/mips/netlogic/common/Makefile
> delete mode 100644 arch/mips/netlogic/common/earlycons.c
> delete mode 100644 arch/mips/netlogic/common/irq.c
> delete mode 100644 arch/mips/netlogic/common/reset.S
> delete mode 100644 arch/mips/netlogic/common/smp.c
> delete mode 100644 arch/mips/netlogic/common/smpboot.S
> delete mode 100644 arch/mips/netlogic/common/time.c
> delete mode 100644 arch/mips/netlogic/xlp/Makefile
> delete mode 100644 arch/mips/netlogic/xlp/ahci-init-xlp2.c
> delete mode 100644 arch/mips/netlogic/xlp/ahci-init.c
> delete mode 100644 arch/mips/netlogic/xlp/cop2-ex.c
> delete mode 100644 arch/mips/netlogic/xlp/dt.c
> delete mode 100644 arch/mips/netlogic/xlp/nlm_hal.c
> delete mode 100644 arch/mips/netlogic/xlp/setup.c
> delete mode 100644 arch/mips/netlogic/xlp/usb-init-xlp2.c
> delete mode 100644 arch/mips/netlogic/xlp/usb-init.c
> delete mode 100644 arch/mips/netlogic/xlp/wakeup.c
> delete mode 100644 arch/mips/netlogic/xlr/Makefile
> delete mode 100644 arch/mips/netlogic/xlr/fmn-config.c
> delete mode 100644 arch/mips/netlogic/xlr/fmn.c
> delete mode 100644 arch/mips/netlogic/xlr/platform-flash.c
> delete mode 100644 arch/mips/netlogic/xlr/platform.c
> delete mode 100644 arch/mips/netlogic/xlr/setup.c
> delete mode 100644 arch/mips/netlogic/xlr/wakeup.c
> delete mode 100644 arch/mips/pci/msi-xlp.c
> delete mode 100644 arch/mips/pci/pci-xlp.c
> delete mode 100644 arch/mips/pci/pci-xlr.c
applied to mips-next.
Thomas.
--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-10-24 15:37 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-20 12:49 [PATCH] MIPS: Remove NETLOGIC support Thomas Bogendoerfer
2021-10-24 15:26 ` Thomas Bogendoerfer
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.