From: Marc Zyngier <maz@kernel.org>
To: kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: James Morse <james.morse@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Alexandru Elisei <alexandru.elisei@arm.com>,
Quentin Perret <qperret@google.com>,
Will Deacon <will@kernel.org>,
broonie@kernel.org, kernel-team@android.com
Subject: [PATCH 1/4] KVM: arm64: Reorder vcpu flag definitions
Date: Thu, 21 Oct 2021 16:11:21 +0100 [thread overview]
Message-ID: <20211021151124.3098113-2-maz@kernel.org> (raw)
In-Reply-To: <20211021151124.3098113-1-maz@kernel.org>
The vcpu arch flags are in an interesting, semi random order.
As I have made the mistake of reusing a flag once, let's rework
this in an order that I find a bit less confusing.
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
arch/arm64/include/asm/kvm_host.h | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index d0221fb69a60..f856ab63f092 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -417,14 +417,12 @@ struct kvm_vcpu_arch {
#define KVM_ARM64_VCPU_SVE_FINALIZED (1 << 6) /* SVE config completed */
#define KVM_ARM64_GUEST_HAS_PTRAUTH (1 << 7) /* PTRAUTH exposed to guest */
#define KVM_ARM64_PENDING_EXCEPTION (1 << 8) /* Exception pending */
+/*
+ * Overlaps with KVM_ARM64_EXCEPT_MASK on purpose so that it can't be
+ * set together with an exception...
+ */
+#define KVM_ARM64_INCREMENT_PC (1 << 9) /* Increment PC */
#define KVM_ARM64_EXCEPT_MASK (7 << 9) /* Target EL/MODE */
-#define KVM_ARM64_DEBUG_STATE_SAVE_SPE (1 << 12) /* Save SPE context if active */
-#define KVM_ARM64_DEBUG_STATE_SAVE_TRBE (1 << 13) /* Save TRBE context if active */
-
-#define KVM_GUESTDBG_VALID_MASK (KVM_GUESTDBG_ENABLE | \
- KVM_GUESTDBG_USE_SW_BP | \
- KVM_GUESTDBG_USE_HW | \
- KVM_GUESTDBG_SINGLESTEP)
/*
* When KVM_ARM64_PENDING_EXCEPTION is set, KVM_ARM64_EXCEPT_MASK can
* take the following values:
@@ -442,11 +440,13 @@ struct kvm_vcpu_arch {
#define KVM_ARM64_EXCEPT_AA64_EL1 (0 << 11)
#define KVM_ARM64_EXCEPT_AA64_EL2 (1 << 11)
-/*
- * Overlaps with KVM_ARM64_EXCEPT_MASK on purpose so that it can't be
- * set together with an exception...
- */
-#define KVM_ARM64_INCREMENT_PC (1 << 9) /* Increment PC */
+#define KVM_ARM64_DEBUG_STATE_SAVE_SPE (1 << 12) /* Save SPE context if active */
+#define KVM_ARM64_DEBUG_STATE_SAVE_TRBE (1 << 13) /* Save TRBE context if active */
+
+#define KVM_GUESTDBG_VALID_MASK (KVM_GUESTDBG_ENABLE | \
+ KVM_GUESTDBG_USE_SW_BP | \
+ KVM_GUESTDBG_USE_HW | \
+ KVM_GUESTDBG_SINGLESTEP)
#define vcpu_has_sve(vcpu) (system_supports_sve() && \
((vcpu)->arch.flags & KVM_ARM64_GUEST_HAS_SVE))
--
2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Marc Zyngier <maz@kernel.org>
To: kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: kernel-team@android.com, Will Deacon <will@kernel.org>,
broonie@kernel.org
Subject: [PATCH 1/4] KVM: arm64: Reorder vcpu flag definitions
Date: Thu, 21 Oct 2021 16:11:21 +0100 [thread overview]
Message-ID: <20211021151124.3098113-2-maz@kernel.org> (raw)
In-Reply-To: <20211021151124.3098113-1-maz@kernel.org>
The vcpu arch flags are in an interesting, semi random order.
As I have made the mistake of reusing a flag once, let's rework
this in an order that I find a bit less confusing.
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
arch/arm64/include/asm/kvm_host.h | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index d0221fb69a60..f856ab63f092 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -417,14 +417,12 @@ struct kvm_vcpu_arch {
#define KVM_ARM64_VCPU_SVE_FINALIZED (1 << 6) /* SVE config completed */
#define KVM_ARM64_GUEST_HAS_PTRAUTH (1 << 7) /* PTRAUTH exposed to guest */
#define KVM_ARM64_PENDING_EXCEPTION (1 << 8) /* Exception pending */
+/*
+ * Overlaps with KVM_ARM64_EXCEPT_MASK on purpose so that it can't be
+ * set together with an exception...
+ */
+#define KVM_ARM64_INCREMENT_PC (1 << 9) /* Increment PC */
#define KVM_ARM64_EXCEPT_MASK (7 << 9) /* Target EL/MODE */
-#define KVM_ARM64_DEBUG_STATE_SAVE_SPE (1 << 12) /* Save SPE context if active */
-#define KVM_ARM64_DEBUG_STATE_SAVE_TRBE (1 << 13) /* Save TRBE context if active */
-
-#define KVM_GUESTDBG_VALID_MASK (KVM_GUESTDBG_ENABLE | \
- KVM_GUESTDBG_USE_SW_BP | \
- KVM_GUESTDBG_USE_HW | \
- KVM_GUESTDBG_SINGLESTEP)
/*
* When KVM_ARM64_PENDING_EXCEPTION is set, KVM_ARM64_EXCEPT_MASK can
* take the following values:
@@ -442,11 +440,13 @@ struct kvm_vcpu_arch {
#define KVM_ARM64_EXCEPT_AA64_EL1 (0 << 11)
#define KVM_ARM64_EXCEPT_AA64_EL2 (1 << 11)
-/*
- * Overlaps with KVM_ARM64_EXCEPT_MASK on purpose so that it can't be
- * set together with an exception...
- */
-#define KVM_ARM64_INCREMENT_PC (1 << 9) /* Increment PC */
+#define KVM_ARM64_DEBUG_STATE_SAVE_SPE (1 << 12) /* Save SPE context if active */
+#define KVM_ARM64_DEBUG_STATE_SAVE_TRBE (1 << 13) /* Save TRBE context if active */
+
+#define KVM_GUESTDBG_VALID_MASK (KVM_GUESTDBG_ENABLE | \
+ KVM_GUESTDBG_USE_SW_BP | \
+ KVM_GUESTDBG_USE_HW | \
+ KVM_GUESTDBG_SINGLESTEP)
#define vcpu_has_sve(vcpu) (system_supports_sve() && \
((vcpu)->arch.flags & KVM_ARM64_GUEST_HAS_SVE))
--
2.30.2
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
WARNING: multiple messages have this Message-ID (diff)
From: Marc Zyngier <maz@kernel.org>
To: kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: James Morse <james.morse@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Alexandru Elisei <alexandru.elisei@arm.com>,
Quentin Perret <qperret@google.com>,
Will Deacon <will@kernel.org>,
broonie@kernel.org, kernel-team@android.com
Subject: [PATCH 1/4] KVM: arm64: Reorder vcpu flag definitions
Date: Thu, 21 Oct 2021 16:11:21 +0100 [thread overview]
Message-ID: <20211021151124.3098113-2-maz@kernel.org> (raw)
In-Reply-To: <20211021151124.3098113-1-maz@kernel.org>
The vcpu arch flags are in an interesting, semi random order.
As I have made the mistake of reusing a flag once, let's rework
this in an order that I find a bit less confusing.
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
arch/arm64/include/asm/kvm_host.h | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index d0221fb69a60..f856ab63f092 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -417,14 +417,12 @@ struct kvm_vcpu_arch {
#define KVM_ARM64_VCPU_SVE_FINALIZED (1 << 6) /* SVE config completed */
#define KVM_ARM64_GUEST_HAS_PTRAUTH (1 << 7) /* PTRAUTH exposed to guest */
#define KVM_ARM64_PENDING_EXCEPTION (1 << 8) /* Exception pending */
+/*
+ * Overlaps with KVM_ARM64_EXCEPT_MASK on purpose so that it can't be
+ * set together with an exception...
+ */
+#define KVM_ARM64_INCREMENT_PC (1 << 9) /* Increment PC */
#define KVM_ARM64_EXCEPT_MASK (7 << 9) /* Target EL/MODE */
-#define KVM_ARM64_DEBUG_STATE_SAVE_SPE (1 << 12) /* Save SPE context if active */
-#define KVM_ARM64_DEBUG_STATE_SAVE_TRBE (1 << 13) /* Save TRBE context if active */
-
-#define KVM_GUESTDBG_VALID_MASK (KVM_GUESTDBG_ENABLE | \
- KVM_GUESTDBG_USE_SW_BP | \
- KVM_GUESTDBG_USE_HW | \
- KVM_GUESTDBG_SINGLESTEP)
/*
* When KVM_ARM64_PENDING_EXCEPTION is set, KVM_ARM64_EXCEPT_MASK can
* take the following values:
@@ -442,11 +440,13 @@ struct kvm_vcpu_arch {
#define KVM_ARM64_EXCEPT_AA64_EL1 (0 << 11)
#define KVM_ARM64_EXCEPT_AA64_EL2 (1 << 11)
-/*
- * Overlaps with KVM_ARM64_EXCEPT_MASK on purpose so that it can't be
- * set together with an exception...
- */
-#define KVM_ARM64_INCREMENT_PC (1 << 9) /* Increment PC */
+#define KVM_ARM64_DEBUG_STATE_SAVE_SPE (1 << 12) /* Save SPE context if active */
+#define KVM_ARM64_DEBUG_STATE_SAVE_TRBE (1 << 13) /* Save TRBE context if active */
+
+#define KVM_GUESTDBG_VALID_MASK (KVM_GUESTDBG_ENABLE | \
+ KVM_GUESTDBG_USE_SW_BP | \
+ KVM_GUESTDBG_USE_HW | \
+ KVM_GUESTDBG_SINGLESTEP)
#define vcpu_has_sve(vcpu) (system_supports_sve() && \
((vcpu)->arch.flags & KVM_ARM64_GUEST_HAS_SVE))
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-10-21 15:11 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-21 15:11 [PATCH 0/4] KVM: arm64: Stop mapping current thread_info at EL2 Marc Zyngier
2021-10-21 15:11 ` Marc Zyngier
2021-10-21 15:11 ` Marc Zyngier
2021-10-21 15:11 ` Marc Zyngier [this message]
2021-10-21 15:11 ` [PATCH 1/4] KVM: arm64: Reorder vcpu flag definitions Marc Zyngier
2021-10-21 15:11 ` Marc Zyngier
2021-10-21 15:11 ` [PATCH 2/4] KVM: arm64: Introduce flag shadowing TIF_FOREIGN_FPSTATE Marc Zyngier
2021-10-21 15:11 ` Marc Zyngier
2021-10-21 15:11 ` Marc Zyngier
2021-10-21 15:24 ` Mark Brown
2021-10-21 15:24 ` Mark Brown
2021-10-21 15:24 ` Mark Brown
2021-10-21 15:11 ` [PATCH 3/4] KVM: arm64: Stop mapping current thread_info at EL2 Marc Zyngier
2021-10-21 15:11 ` Marc Zyngier
2021-10-21 15:11 ` Marc Zyngier
2021-10-21 15:11 ` [PATCH 4/4] arm64/fpsimd: Document the use of TIF_FOREIGN_FPSTATE by KVM Marc Zyngier
2021-10-21 15:11 ` Marc Zyngier
2021-10-21 15:11 ` Marc Zyngier
2021-10-21 15:57 ` Mark Brown
2021-10-21 15:57 ` Mark Brown
2021-10-21 15:57 ` Mark Brown
2021-10-27 11:26 ` Marc Zyngier
2021-10-27 11:26 ` Marc Zyngier
2021-10-27 11:26 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211021151124.3098113-2-maz@kernel.org \
--to=maz@kernel.org \
--cc=alexandru.elisei@arm.com \
--cc=broonie@kernel.org \
--cc=james.morse@arm.com \
--cc=kernel-team@android.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=qperret@google.com \
--cc=suzuki.poulose@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.