From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v3 00/18] powerpc: Make hash MMU code build configurable
Date: Fri, 22 Oct 2021 08:29:55 +1000 [thread overview]
Message-ID: <20211021223013.2641952-1-npiggin@gmail.com> (raw)
Now that there's a platform that can make good use of it, here's
a series that can prevent the hash MMU code being built for 64s
platforms that don't need it.
Since v2:
- Split MMU_FTR_HPTE_TABLE clearing for radix boot into its own patch.
- Remove memremap_compat_align from other sub archs entirely.
- Flip patch order of the 2 main patches to put Kconfig change first.
- Fixed Book3S/32 xmon segment dumping bug.
- Removed a few more ifdefs, changed numbers to use SZ_ definitions,
etc.
- Fixed microwatt defconfig so it should actually disable hash MMU now.
Since v1:
- Split out most of the Kconfig change from the conditional compilation
changes.
- Split out several more changes into preparatory patches.
- Reduced some ifdefs.
- Caught a few missing hash bits: pgtable dump, lkdtm,
memremap_compat_align.
Since RFC:
- Split out large code movement from other changes.
- Used mmu ftr test constant folding rather than adding new constant
true/false for radix_enabled().
- Restore tlbie trace point that had to be commented out in the
previous.
- Avoid minor (probably unreachable) behaviour change in machine check
handler when hash was not compiled.
- Fix microwatt updates so !HASH is not enforced.
- Rebase, build fixes.
Thanks,
Nick
Nicholas Piggin (18):
powerpc: Remove unused FW_FEATURE_NATIVE references
powerpc: Rename PPC_NATIVE to PPC_HASH_MMU_NATIVE
powerpc/pseries: Stop selecting PPC_HASH_MMU_NATIVE
powerpc/64s: Move and rename do_bad_slb_fault as it is not hash
specific
powerpc/pseries: move pseries_lpar_register_process_table() out from
hash specific code
powerpc/pseries: lparcfg don't include slb_size line in radix mode
powerpc/64s: move THP trace point creation out of hash specific file
powerpc/64s: Make flush_and_reload_slb a no-op when radix is enabled
powerpc/64s: move page size definitions from hash specific file
powerpc/64s: Rename hash_hugetlbpage.c to hugetlbpage.c
powerpc/64: pcpu setup avoid reading mmu_linear_psize on 64e or radix
powerpc: make memremap_compat_align 64s-only
powerpc/64e: remove mmu_linear_psize
powerpc/64s: Clear MMU_FTR_HPTE_TABLE when booting in radix
powerpc/64s: Make hash MMU support configurable
powerpc/64s: Move hash MMU support code under CONFIG_PPC_64S_HASH_MMU
powerpc/configs/microwatt: add POWER9_CPU
powerpc/microwatt: Don't select the hash MMU code
arch/powerpc/Kconfig | 5 +-
arch/powerpc/configs/microwatt_defconfig | 3 +-
arch/powerpc/include/asm/book3s/64/mmu.h | 19 ++-
.../include/asm/book3s/64/tlbflush-hash.h | 7 ++
arch/powerpc/include/asm/book3s/64/tlbflush.h | 4 -
arch/powerpc/include/asm/book3s/pgtable.h | 4 +
arch/powerpc/include/asm/firmware.h | 8 --
arch/powerpc/include/asm/interrupt.h | 2 +-
arch/powerpc/include/asm/mmu.h | 16 ++-
arch/powerpc/include/asm/mmu_context.h | 2 +
arch/powerpc/include/asm/paca.h | 8 ++
arch/powerpc/kernel/asm-offsets.c | 2 +
arch/powerpc/kernel/dt_cpu_ftrs.c | 14 ++-
arch/powerpc/kernel/entry_64.S | 4 +-
arch/powerpc/kernel/exceptions-64s.S | 20 +++-
arch/powerpc/kernel/mce.c | 2 +-
arch/powerpc/kernel/mce_power.c | 16 ++-
arch/powerpc/kernel/paca.c | 18 ++-
arch/powerpc/kernel/process.c | 13 +-
arch/powerpc/kernel/prom.c | 2 +
arch/powerpc/kernel/setup_64.c | 26 +++-
arch/powerpc/kexec/core_64.c | 4 +-
arch/powerpc/kexec/ranges.c | 4 +
arch/powerpc/kvm/Kconfig | 1 +
arch/powerpc/mm/book3s64/Makefile | 19 +--
arch/powerpc/mm/book3s64/hash_native.c | 104 ----------------
arch/powerpc/mm/book3s64/hash_pgtable.c | 1 -
arch/powerpc/mm/book3s64/hash_utils.c | 111 +++++++++++++++++-
.../{hash_hugetlbpage.c => hugetlbpage.c} | 2 +
arch/powerpc/mm/book3s64/mmu_context.c | 34 +++++-
arch/powerpc/mm/book3s64/pgtable.c | 28 +++++
arch/powerpc/mm/book3s64/radix_pgtable.c | 4 +
arch/powerpc/mm/book3s64/slb.c | 16 ---
arch/powerpc/mm/book3s64/trace.c | 8 ++
arch/powerpc/mm/copro_fault.c | 2 +
arch/powerpc/mm/fault.c | 17 +++
arch/powerpc/mm/init_64.c | 14 ++-
arch/powerpc/mm/ioremap.c | 20 ----
arch/powerpc/mm/nohash/tlb.c | 9 --
arch/powerpc/mm/pgtable.c | 9 +-
arch/powerpc/mm/ptdump/Makefile | 2 +-
arch/powerpc/platforms/52xx/Kconfig | 2 +-
arch/powerpc/platforms/Kconfig | 4 +-
arch/powerpc/platforms/Kconfig.cputype | 29 ++++-
arch/powerpc/platforms/cell/Kconfig | 3 +-
arch/powerpc/platforms/chrp/Kconfig | 2 +-
arch/powerpc/platforms/embedded6xx/Kconfig | 2 +-
arch/powerpc/platforms/maple/Kconfig | 3 +-
arch/powerpc/platforms/microwatt/Kconfig | 1 -
arch/powerpc/platforms/pasemi/Kconfig | 3 +-
arch/powerpc/platforms/powermac/Kconfig | 3 +-
arch/powerpc/platforms/powernv/Kconfig | 2 +-
arch/powerpc/platforms/powernv/idle.c | 2 +
arch/powerpc/platforms/powernv/setup.c | 2 +
arch/powerpc/platforms/pseries/Kconfig | 1 -
arch/powerpc/platforms/pseries/lpar.c | 67 ++++++-----
arch/powerpc/platforms/pseries/lparcfg.c | 5 +-
arch/powerpc/platforms/pseries/mobility.c | 6 +
arch/powerpc/platforms/pseries/ras.c | 2 +
arch/powerpc/platforms/pseries/reconfig.c | 2 +
arch/powerpc/platforms/pseries/setup.c | 6 +-
arch/powerpc/xmon/xmon.c | 8 +-
drivers/misc/lkdtm/Makefile | 2 +-
drivers/misc/lkdtm/core.c | 2 +-
64 files changed, 474 insertions(+), 289 deletions(-)
rename arch/powerpc/mm/book3s64/{hash_hugetlbpage.c => hugetlbpage.c} (99%)
create mode 100644 arch/powerpc/mm/book3s64/trace.c
--
2.23.0
next reply other threads:[~2021-10-21 22:31 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-21 22:29 Nicholas Piggin [this message]
2021-10-21 22:29 ` [PATCH v3 01/18] powerpc: Remove unused FW_FEATURE_NATIVE references Nicholas Piggin
2021-10-21 22:29 ` [PATCH v3 02/18] powerpc: Rename PPC_NATIVE to PPC_HASH_MMU_NATIVE Nicholas Piggin
2021-10-21 22:29 ` [PATCH v3 03/18] powerpc/pseries: Stop selecting PPC_HASH_MMU_NATIVE Nicholas Piggin
2021-10-21 22:29 ` [PATCH v3 04/18] powerpc/64s: Move and rename do_bad_slb_fault as it is not hash specific Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 05/18] powerpc/pseries: move pseries_lpar_register_process_table() out from hash specific code Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 06/18] powerpc/pseries: lparcfg don't include slb_size line in radix mode Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 07/18] powerpc/64s: move THP trace point creation out of hash specific file Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 08/18] powerpc/64s: Make flush_and_reload_slb a no-op when radix is enabled Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 09/18] powerpc/64s: move page size definitions from hash specific file Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 10/18] powerpc/64s: Rename hash_hugetlbpage.c to hugetlbpage.c Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 11/18] powerpc/64: pcpu setup avoid reading mmu_linear_psize on 64e or radix Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 12/18] powerpc: make memremap_compat_align 64s-only Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 13/18] powerpc/64e: remove mmu_linear_psize Nicholas Piggin
2021-10-22 6:49 ` Christophe Leroy
2021-10-22 9:21 ` Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 14/18] powerpc/64s: Clear MMU_FTR_HPTE_TABLE when booting in radix Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 15/18] powerpc/64s: Make hash MMU support configurable Nicholas Piggin
2021-10-22 7:02 ` Christophe Leroy
2021-10-22 9:30 ` Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 16/18] powerpc/64s: Move hash MMU support code under CONFIG_PPC_64S_HASH_MMU Nicholas Piggin
2021-10-22 7:18 ` Christophe Leroy
2021-10-22 9:34 ` Nicholas Piggin
2021-10-22 9:39 ` Christophe Leroy
2021-10-22 9:44 ` Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 17/18] powerpc/configs/microwatt: add POWER9_CPU Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 18/18] powerpc/microwatt: Don't select the hash MMU code Nicholas Piggin
2021-10-22 7:18 ` Christophe Leroy
2021-10-22 9:34 ` Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211021223013.2641952-1-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.