All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v3 04/18] powerpc/64s: Move and rename do_bad_slb_fault as it is not hash specific
Date: Fri, 22 Oct 2021 08:29:59 +1000	[thread overview]
Message-ID: <20211021223013.2641952-5-npiggin@gmail.com> (raw)
In-Reply-To: <20211021223013.2641952-1-npiggin@gmail.com>

slb.c is hash-specific SLB management, but do_bad_slb_fault deals with
segment interrupts that occur with radix MMU as well.
---
 arch/powerpc/include/asm/interrupt.h |  2 +-
 arch/powerpc/kernel/exceptions-64s.S |  4 ++--
 arch/powerpc/mm/book3s64/slb.c       | 16 ----------------
 arch/powerpc/mm/fault.c              | 17 +++++++++++++++++
 4 files changed, 20 insertions(+), 19 deletions(-)

diff --git a/arch/powerpc/include/asm/interrupt.h b/arch/powerpc/include/asm/interrupt.h
index a1d238255f07..3487aab12229 100644
--- a/arch/powerpc/include/asm/interrupt.h
+++ b/arch/powerpc/include/asm/interrupt.h
@@ -564,7 +564,7 @@ DECLARE_INTERRUPT_HANDLER(kernel_bad_stack);
 
 /* slb.c */
 DECLARE_INTERRUPT_HANDLER_RAW(do_slb_fault);
-DECLARE_INTERRUPT_HANDLER(do_bad_slb_fault);
+DECLARE_INTERRUPT_HANDLER(do_bad_segment_interrupt);
 
 /* hash_utils.c */
 DECLARE_INTERRUPT_HANDLER_RAW(do_hash_fault);
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index eaf1f72131a1..046c99e31d01 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1430,7 +1430,7 @@ MMU_FTR_SECTION_ELSE
 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
 	std	r3,RESULT(r1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	do_bad_slb_fault
+	bl	do_bad_segment_interrupt
 	b	interrupt_return_srr
 
 
@@ -1510,7 +1510,7 @@ MMU_FTR_SECTION_ELSE
 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
 	std	r3,RESULT(r1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	do_bad_slb_fault
+	bl	do_bad_segment_interrupt
 	b	interrupt_return_srr
 
 
diff --git a/arch/powerpc/mm/book3s64/slb.c b/arch/powerpc/mm/book3s64/slb.c
index f0037bcc47a0..31f4cef3adac 100644
--- a/arch/powerpc/mm/book3s64/slb.c
+++ b/arch/powerpc/mm/book3s64/slb.c
@@ -868,19 +868,3 @@ DEFINE_INTERRUPT_HANDLER_RAW(do_slb_fault)
 		return err;
 	}
 }
-
-DEFINE_INTERRUPT_HANDLER(do_bad_slb_fault)
-{
-	int err = regs->result;
-
-	if (err == -EFAULT) {
-		if (user_mode(regs))
-			_exception(SIGSEGV, regs, SEGV_BNDERR, regs->dar);
-		else
-			bad_page_fault(regs, SIGSEGV);
-	} else if (err == -EINVAL) {
-		unrecoverable_exception(regs);
-	} else {
-		BUG();
-	}
-}
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index a8d0ce85d39a..53ddcae0ac9e 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -35,6 +35,7 @@
 #include <linux/kfence.h>
 #include <linux/pkeys.h>
 
+#include <asm/asm-prototypes.h>
 #include <asm/firmware.h>
 #include <asm/interrupt.h>
 #include <asm/page.h>
@@ -620,4 +621,20 @@ DEFINE_INTERRUPT_HANDLER(do_bad_page_fault_segv)
 {
 	bad_page_fault(regs, SIGSEGV);
 }
+
+DEFINE_INTERRUPT_HANDLER(do_bad_segment_interrupt)
+{
+	int err = regs->result;
+
+	if (err == -EFAULT) {
+		if (user_mode(regs))
+			_exception(SIGSEGV, regs, SEGV_BNDERR, regs->dar);
+		else
+			bad_page_fault(regs, SIGSEGV);
+	} else if (err == -EINVAL) {
+		unrecoverable_exception(regs);
+	} else {
+		BUG();
+	}
+}
 #endif
-- 
2.23.0


  parent reply	other threads:[~2021-10-21 22:33 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-21 22:29 [PATCH v3 00/18] powerpc: Make hash MMU code build configurable Nicholas Piggin
2021-10-21 22:29 ` [PATCH v3 01/18] powerpc: Remove unused FW_FEATURE_NATIVE references Nicholas Piggin
2021-10-21 22:29 ` [PATCH v3 02/18] powerpc: Rename PPC_NATIVE to PPC_HASH_MMU_NATIVE Nicholas Piggin
2021-10-21 22:29 ` [PATCH v3 03/18] powerpc/pseries: Stop selecting PPC_HASH_MMU_NATIVE Nicholas Piggin
2021-10-21 22:29 ` Nicholas Piggin [this message]
2021-10-21 22:30 ` [PATCH v3 05/18] powerpc/pseries: move pseries_lpar_register_process_table() out from hash specific code Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 06/18] powerpc/pseries: lparcfg don't include slb_size line in radix mode Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 07/18] powerpc/64s: move THP trace point creation out of hash specific file Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 08/18] powerpc/64s: Make flush_and_reload_slb a no-op when radix is enabled Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 09/18] powerpc/64s: move page size definitions from hash specific file Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 10/18] powerpc/64s: Rename hash_hugetlbpage.c to hugetlbpage.c Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 11/18] powerpc/64: pcpu setup avoid reading mmu_linear_psize on 64e or radix Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 12/18] powerpc: make memremap_compat_align 64s-only Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 13/18] powerpc/64e: remove mmu_linear_psize Nicholas Piggin
2021-10-22  6:49   ` Christophe Leroy
2021-10-22  9:21     ` Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 14/18] powerpc/64s: Clear MMU_FTR_HPTE_TABLE when booting in radix Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 15/18] powerpc/64s: Make hash MMU support configurable Nicholas Piggin
2021-10-22  7:02   ` Christophe Leroy
2021-10-22  9:30     ` Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 16/18] powerpc/64s: Move hash MMU support code under CONFIG_PPC_64S_HASH_MMU Nicholas Piggin
2021-10-22  7:18   ` Christophe Leroy
2021-10-22  9:34     ` Nicholas Piggin
2021-10-22  9:39       ` Christophe Leroy
2021-10-22  9:44       ` Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 17/18] powerpc/configs/microwatt: add POWER9_CPU Nicholas Piggin
2021-10-21 22:30 ` [PATCH v3 18/18] powerpc/microwatt: Don't select the hash MMU code Nicholas Piggin
2021-10-22  7:18   ` Christophe Leroy
2021-10-22  9:34     ` Nicholas Piggin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211021223013.2641952-5-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.