All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: linuxarm@huawei.com, mauro.chehab@huawei.com,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Binghui Wang" <wangbinghui@hisilicon.com>,
	"Rob Herring" <robh@kernel.org>,
	"Xiaowei Song" <songxiaowei@hisilicon.com>,
	linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org
Subject: Re: [PATCH v15 00/13] Add support for Hikey 970 PCIe
Date: Tue, 26 Oct 2021 18:17:28 +0100	[thread overview]
Message-ID: <20211026171728.GA20609@lpieralisi> (raw)
In-Reply-To: <cover.1634812676.git.mchehab+huawei@kernel.org>

On Thu, Oct 21, 2021 at 11:45:07AM +0100, Mauro Carvalho Chehab wrote:
> Hi Lorenzo,
> 
> I split patch 09/10 from v13 into three patches, in order to have one logical
> change per patch, adding a proper descriptio to each of them. The final
> code didn change.
> 
> The pcie-kirin PCIe driver contains internally a PHY interface for
> Kirin 960, but it misses support for Kirin 970. A new PHY driver
> for it was added at drivers/phy/hisilicon/phy-hi3670-pcie.c
> (already merged via PHY tree).
> 
> Add support for Kirin 970 PHY driver at the pcie-kirin.c.
> 
> While here, also add the needed logic to compile it as module and
> to allow to dynamically remove the driver in runtime.
> 
> Tested on HiKey970:
> 
>   # lspci -D -PP
>   0000:00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3670 (rev 01)
>   0000:00:00.0/01:00.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
>   0000:00:00.0/01:00.0/02:01.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
>   0000:00:00.0/01:00.0/02:04.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
>   0000:00:00.0/01:00.0/02:05.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
>   0000:00:00.0/01:00.0/02:07.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
>   0000:00:00.0/01:00.0/02:09.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
>   0000:00:00.0/01:00.0/02:01.0/03:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd Device a809
>   0000:00:00.0/01:00.0/02:07.0/06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07)
> 
> Tested on HiKey960:
> 
>   # lspci -D 
>   0000:00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3660 (rev 01)
> 
> ---
> 
> v15:
>   - The power-off fix patch was split into 3, in order to have one logical change
>     per patch.
>   -  Removed Fixes: tag from the poweroff patch;
>   - Adjusted capitalization of two patch summary lines
>   - No functional changes. The diff of this series is identical to v14.
> 
> v14:
>   - Split a timeout logic from patch 4, placing it on a separate patch;
>   - Added fixes: and cc: tags to the power_off fixup patch;
>   - change a typecast from of_data to long, in order to avoid a warning on
>     some randconfigs;
>   - removed uneeded brackets at the power_off patch;
>   - reordered struct device pointers at kirin_pcie_get_resource();
>   - added a c/c to kishon at the PHY-related patches.
> 
> v13:
>   - Added Xiaowei's ack for the series.
> 
> v12:
>   - Change a comment at patch 1 to not use c99 style.
> 
> v11:
>   - patch 5 changed to use the right PCIe topology
>   - all other patches are identical to v10.
> 
> v10:
>   - patch 1: dropped magic numbers from PHY driver
>   - patch 5: allow pcie child nodes without reset-gpios
>   - all other patches are identical to v9.
> 
> v9:
>   - Did some cleanups at patches 1 and 5
> 
> Mauro Carvalho Chehab (13):
>   PCI: kirin: Reorganize the PHY logic inside the driver
>   PCI: kirin: Add support for a PHY layer
>   PCI: kirin: Use regmap for APB registers
>   PCI: kirin: Add support for bridge slot DT schema
>   PCI: kirin: Give more time for PERST# reset to finish
>   PCI: kirin: Add Kirin 970 compatible
>   PCI: kirin: Add MODULE_* macros
>   PCI: kirin: Allow building it as a module
>   PCI: kirin: Add power_off support for Kirin 960 PHY
>   PCI: kirin: Move the power-off code to a common routine
>   PCI: kirin: Disable clkreq during poweroff sequence
>   PCI: kirin: De-init the dwc driver
>   PCI: kirin: Allow removing the driver
> 
>  drivers/pci/controller/dwc/Kconfig      |   2 +-
>  drivers/pci/controller/dwc/pcie-kirin.c | 643 ++++++++++++++++++------
>  2 files changed, 497 insertions(+), 148 deletions(-)

Applied to pci/dwc for v5.16, please have a look at the resulting
branch and commits. 

Thanks,
Lorenzo

  parent reply	other threads:[~2021-10-26 17:17 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-21 10:45 [PATCH v15 00/13] Add support for Hikey 970 PCIe Mauro Carvalho Chehab
2021-10-21 10:45 ` [PATCH v15 01/13] PCI: kirin: Reorganize the PHY logic inside the driver Mauro Carvalho Chehab
2021-11-04 21:48   ` Bjorn Helgaas
2021-10-21 10:45 ` [PATCH v15 02/13] PCI: kirin: Add support for a PHY layer Mauro Carvalho Chehab
2021-10-25  8:14   ` Kishon Vijay Abraham I
2021-10-25  8:52     ` Mauro Carvalho Chehab
2021-10-25  8:56       ` Kishon Vijay Abraham I
2021-10-21 10:45 ` [PATCH v15 03/13] PCI: kirin: Use regmap for APB registers Mauro Carvalho Chehab
2021-10-21 10:45 ` [PATCH v15 04/13] PCI: kirin: Add support for bridge slot DT schema Mauro Carvalho Chehab
2021-11-02 16:06   ` Bjorn Helgaas
2021-11-02 17:44     ` Mauro Carvalho Chehab
2021-11-02 22:08       ` Pali Rohár
2021-11-04 15:36       ` Rob Herring
2021-11-04 17:27         ` Mauro Carvalho Chehab
2021-10-21 10:45 ` [PATCH v15 05/13] PCI: kirin: Give more time for PERST# reset to finish Mauro Carvalho Chehab
2021-10-21 10:45 ` [PATCH v15 06/13] PCI: kirin: Add Kirin 970 compatible Mauro Carvalho Chehab
2021-10-21 10:45 ` [PATCH v15 07/13] PCI: kirin: Add MODULE_* macros Mauro Carvalho Chehab
2021-10-21 10:45 ` [PATCH v15 08/13] PCI: kirin: Allow building it as a module Mauro Carvalho Chehab
2021-10-21 10:45 ` [PATCH v15 09/13] PCI: kirin: Add power_off support for Kirin 960 PHY Mauro Carvalho Chehab
2021-10-21 10:45 ` [PATCH v15 10/13] PCI: kirin: Move the power-off code to a common routine Mauro Carvalho Chehab
2021-10-21 10:45 ` [PATCH v15 11/13] PCI: kirin: Disable clkreq during poweroff sequence Mauro Carvalho Chehab
2021-10-21 10:45 ` [PATCH v15 12/13] PCI: kirin: De-init the dwc driver Mauro Carvalho Chehab
2021-10-21 10:45 ` [PATCH v15 13/13] PCI: kirin: Allow removing the driver Mauro Carvalho Chehab
2021-10-31 20:55   ` Pali Rohár
2021-10-21 12:17 ` [PATCH v15 00/13] Add support for Hikey 970 PCIe Lorenzo Pieralisi
2021-10-26 17:17 ` Lorenzo Pieralisi [this message]
2021-10-27  7:24   ` Mauro Carvalho Chehab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211026171728.GA20609@lpieralisi \
    --to=lorenzo.pieralisi@arm.com \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=mauro.chehab@huawei.com \
    --cc=mchehab+huawei@kernel.org \
    --cc=robh@kernel.org \
    --cc=songxiaowei@hisilicon.com \
    --cc=wangbinghui@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.