[PATCH 00/14] DC patches for Nov 1, 2021

[PATCH 00/14] DC patches for Nov 1, 2021

[Aurabindo Pillai]

This DC patchset brings improvements in multiple areas. In summary, we highlight:

* DC release version 3.2.160
* DMUB fw version 0.0.91 and bug fixes
* DSC related fixes
* Minor power optimization improvements
* Bug fixes and improvements in display pipeline

-------------------------------

Anson Jacob (1):
  drm/amd/display: Fix dcn10_log_hubp_states printf format string

Anthony Koo (1):
  drm/amd/display: [FW Promotion] Release 0.0.91

Aric Cyr (1):
  drm/amd/display: 3.2.160

Aurabindo Pillai (1):
  drm/amd/display: add condition check for dmub notification

Bing Guo (1):
  drm/amd/display: Fix bpc calculation for specific encodings

Felipe Clark (1):
  drm/amd/display: Fix dummy p-state hang on monitors with extreme
    timing

Hersen Wu (1):
  drm/amd/display: dsc engine not disabled after unplug dsc mst hub

Jake Wang (3):
  drm/amd/display: Added HPO HW control shutdown support
  drm/amd/display: Add MPC meory shutdown support
  drm/amd/display: Added new DMUB boot option for power optimization

Jimmy Kizito (1):
  drm/amd/display: Clear encoder assignments when state cleared.

Roman Li (1):
  drm/amd/display: Force disable planes on any pipe split change

Wenjing Liu (1):
  drm/amd/display: fix register write sequence for LINK_SQUARE_PATTERN

Yu-ting Shen (1):
  drm/amd/display: avoid link loss short pulse stuck the system

 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |  31 ++--
 .../display/amdgpu_dm/amdgpu_dm_mst_types.c   | 150 ++++++++++++++----
 drivers/gpu/drm/amd/display/dc/core/dc.c      |   8 +-
 drivers/gpu/drm/amd/display/dc/core/dc_link.c |   2 +
 .../gpu/drm/amd/display/dc/core/dc_link_dp.c  |   8 +
 .../drm/amd/display/dc/core/dc_link_enc_cfg.c |  22 +++
 drivers/gpu/drm/amd/display/dc/dc.h           |   3 +-
 drivers/gpu/drm/amd/display/dc/dc_dp_types.h  |   3 +
 .../gpu/drm/amd/display/dc/dce/dce_hwseq.h    |   4 +-
 .../display/dc/dce110/dce110_hw_sequencer.c   |   6 +
 .../amd/display/dc/dcn10/dcn10_hw_sequencer.c |   2 +-
 .../drm/amd/display/dc/dcn20/dcn20_hwseq.c    |   3 +
 .../gpu/drm/amd/display/dc/dcn30/dcn30_mpc.c  |   7 +-
 .../drm/amd/display/dc/dcn30/dcn30_resource.c |   7 +-
 .../drm/amd/display/dc/dcn31/dcn31_hwseq.c    |  78 +++++----
 .../drm/amd/display/dc/dcn31/dcn31_hwseq.h    |   1 +
 .../gpu/drm/amd/display/dc/dcn31/dcn31_init.c |   1 +
 .../drm/amd/display/dc/dcn31/dcn31_resource.c |   6 +-
 .../dc/dml/dcn30/display_mode_vba_30.c        |  13 +-
 .../dc/dml/dcn31/display_mode_vba_31.c        |  14 +-
 drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h   |   1 +
 .../amd/display/dc/inc/hw_sequencer_private.h |   1 +
 drivers/gpu/drm/amd/display/dmub/dmub_srv.h   |   1 +
 .../gpu/drm/amd/display/dmub/inc/dmub_cmd.h   |   4 +-
 .../gpu/drm/amd/display/dmub/src/dmub_dcn31.c |   1 +
 25 files changed, 271 insertions(+), 106 deletions(-)

-- 
2.30.2

[PATCH 01/14] drm/amd/display: dsc engine not disabled after unplug dsc mst hub

[Aurabindo Pillai]

From: Hersen Wu <hersenwu@amd.com>

[WHY]
If timing and bpp of displays on mst hub are not changed,
pbn, slot_num for displays should not be changed. Linux
user mode may initiate atomic_check with different display
configuration after set mode finished. This will call to
amdgpu_dm to re-compute payload, slot_num of displays and
saved to dm_connect_state. stream->timing.flags.dsc, pbn,
slot_num are updated to values which may be different from
that were used for set mode. when dsc hub with 3 4k@60hz dp
connected, 3 dsc engines are enabled. timing.flags.dsc = 1.
timing.flags.dsc are changed to 0 due to atomic check. when
dsc hub is unplugged, amdgpu driver check timing.flags.dsc
for last mode set and find out flags.dsc = 0, then does not
disable dsc.

[HOW]
check status of  displays on dsc mst hubs. re-compute pbn,
slot_num, timing.flags.dsc only if there is mode, connect
or enable/disable change.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hersen Wu <hersenwu@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |  31 ++--
 .../display/amdgpu_dm/amdgpu_dm_mst_types.c   | 150 ++++++++++++++----
 2 files changed, 138 insertions(+), 43 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 6dd6262f2769..b48f3cb5ddeb 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -7241,8 +7241,8 @@ static int dm_update_mst_vcpi_slots_for_dsc(struct drm_atomic_state *state,
 	struct drm_connector_state *new_con_state;
 	struct amdgpu_dm_connector *aconnector;
 	struct dm_connector_state *dm_conn_state;
-	int i, j, clock;
-	int vcpi, pbn_div, pbn = 0;
+	int i, j;
+	int vcpi, pbn_div, pbn, slot_num = 0;
 
 	for_each_new_connector_in_state(state, connector, new_con_state, i) {
 
@@ -7270,17 +7270,7 @@ static int dm_update_mst_vcpi_slots_for_dsc(struct drm_atomic_state *state,
 		if (!stream)
 			continue;
 
-		if (stream->timing.flags.DSC != 1) {
-			drm_dp_mst_atomic_enable_dsc(state,
-						     aconnector->port,
-						     dm_conn_state->pbn,
-						     0,
-						     false);
-			continue;
-		}
-
 		pbn_div = dm_mst_get_pbn_divider(stream->link);
-		clock = stream->timing.pix_clk_100hz / 10;
 		/* pbn is calculated by compute_mst_dsc_configs_for_state*/
 		for (j = 0; j < dc_state->stream_count; j++) {
 			if (vars[j].aconnector == aconnector) {
@@ -7289,6 +7279,23 @@ static int dm_update_mst_vcpi_slots_for_dsc(struct drm_atomic_state *state,
 			}
 		}
 
+		if (j == dc_state->stream_count)
+			continue;
+
+		slot_num = DIV_ROUND_UP(pbn, pbn_div);
+
+		if (stream->timing.flags.DSC != 1) {
+			dm_conn_state->pbn = pbn;
+			dm_conn_state->vcpi_slots = slot_num;
+
+			drm_dp_mst_atomic_enable_dsc(state,
+						     aconnector->port,
+						     dm_conn_state->pbn,
+						     0,
+						     false);
+			continue;
+		}
+
 		vcpi = drm_dp_mst_atomic_enable_dsc(state,
 						    aconnector->port,
 						    pbn, pbn_div,
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index 874a49b605c7..32a5ce09a62a 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -534,13 +534,14 @@ static int kbps_to_peak_pbn(int kbps)
 
 static void set_dsc_configs_from_fairness_vars(struct dsc_mst_fairness_params *params,
 		struct dsc_mst_fairness_vars *vars,
-		int count)
+		int count,
+		int k)
 {
 	int i;
 
 	for (i = 0; i < count; i++) {
 		memset(&params[i].timing->dsc_cfg, 0, sizeof(params[i].timing->dsc_cfg));
-		if (vars[i].dsc_enabled && dc_dsc_compute_config(
+		if (vars[i + k].dsc_enabled && dc_dsc_compute_config(
 					params[i].sink->ctx->dc->res_pool->dscs[0],
 					&params[i].sink->dsc_caps.dsc_dec_caps,
 					params[i].sink->ctx->dc->debug.dsc_min_slice_height_override,
@@ -553,7 +554,7 @@ static void set_dsc_configs_from_fairness_vars(struct dsc_mst_fairness_params *p
 			if (params[i].bpp_overwrite)
 				params[i].timing->dsc_cfg.bits_per_pixel = params[i].bpp_overwrite;
 			else
-				params[i].timing->dsc_cfg.bits_per_pixel = vars[i].bpp_x16;
+				params[i].timing->dsc_cfg.bits_per_pixel = vars[i + k].bpp_x16;
 
 			if (params[i].num_slices_h)
 				params[i].timing->dsc_cfg.num_slices_h = params[i].num_slices_h;
@@ -586,7 +587,8 @@ static void increase_dsc_bpp(struct drm_atomic_state *state,
 			     struct dc_link *dc_link,
 			     struct dsc_mst_fairness_params *params,
 			     struct dsc_mst_fairness_vars *vars,
-			     int count)
+			     int count,
+			     int k)
 {
 	int i;
 	bool bpp_increased[MAX_PIPES];
@@ -601,8 +603,9 @@ static void increase_dsc_bpp(struct drm_atomic_state *state,
 	pbn_per_timeslot = dm_mst_get_pbn_divider(dc_link);
 
 	for (i = 0; i < count; i++) {
-		if (vars[i].dsc_enabled) {
-			initial_slack[i] = kbps_to_peak_pbn(params[i].bw_range.max_kbps) - vars[i].pbn;
+		if (vars[i + k].dsc_enabled) {
+			initial_slack[i] =
+			kbps_to_peak_pbn(params[i].bw_range.max_kbps) - vars[i + k].pbn;
 			bpp_increased[i] = false;
 			remaining_to_increase += 1;
 		} else {
@@ -629,7 +632,7 @@ static void increase_dsc_bpp(struct drm_atomic_state *state,
 		link_timeslots_used = 0;
 
 		for (i = 0; i < count; i++)
-			link_timeslots_used += DIV_ROUND_UP(vars[i].pbn, pbn_per_timeslot);
+			link_timeslots_used += DIV_ROUND_UP(vars[i + k].pbn, pbn_per_timeslot);
 
 		fair_pbn_alloc = (63 - link_timeslots_used) / remaining_to_increase * pbn_per_timeslot;
 
@@ -682,7 +685,8 @@ static void try_disable_dsc(struct drm_atomic_state *state,
 			    struct dc_link *dc_link,
 			    struct dsc_mst_fairness_params *params,
 			    struct dsc_mst_fairness_vars *vars,
-			    int count)
+			    int count,
+			    int k)
 {
 	int i;
 	bool tried[MAX_PIPES];
@@ -692,8 +696,8 @@ static void try_disable_dsc(struct drm_atomic_state *state,
 	int remaining_to_try = 0;
 
 	for (i = 0; i < count; i++) {
-		if (vars[i].dsc_enabled
-				&& vars[i].bpp_x16 == params[i].bw_range.max_target_bpp_x16
+		if (vars[i + k].dsc_enabled
+				&& vars[i + k].bpp_x16 == params[i].bw_range.max_target_bpp_x16
 				&& params[i].clock_force_enable == DSC_CLK_FORCE_DEFAULT) {
 			kbps_increase[i] = params[i].bw_range.stream_kbps - params[i].bw_range.max_kbps;
 			tried[i] = false;
@@ -748,9 +752,10 @@ static void try_disable_dsc(struct drm_atomic_state *state,
 static bool compute_mst_dsc_configs_for_link(struct drm_atomic_state *state,
 					     struct dc_state *dc_state,
 					     struct dc_link *dc_link,
-					     struct dsc_mst_fairness_vars *vars)
+					     struct dsc_mst_fairness_vars *vars,
+					     int *link_vars_start_index)
 {
-	int i;
+	int i, k;
 	struct dc_stream_state *stream;
 	struct dsc_mst_fairness_params params[MAX_PIPES];
 	struct amdgpu_dm_connector *aconnector;
@@ -768,11 +773,17 @@ static bool compute_mst_dsc_configs_for_link(struct drm_atomic_state *state,
 		if (stream->link != dc_link)
 			continue;
 
+		aconnector = (struct amdgpu_dm_connector *)stream->dm_stream_context;
+		if (!aconnector)
+			continue;
+
+		if (!aconnector->port)
+			continue;
+
 		stream->timing.flags.DSC = 0;
 
 		params[count].timing = &stream->timing;
 		params[count].sink = stream->sink;
-		aconnector = (struct amdgpu_dm_connector *)stream->dm_stream_context;
 		params[count].aconnector = aconnector;
 		params[count].port = aconnector->port;
 		params[count].clock_force_enable = aconnector->dsc_settings.dsc_force_enable;
@@ -794,44 +805,55 @@ static bool compute_mst_dsc_configs_for_link(struct drm_atomic_state *state,
 
 		count++;
 	}
+
+	if (count == 0) {
+		ASSERT(0);
+		return true;
+	}
+
+	/* k is start index of vars for current phy link used by mst hub */
+	k = *link_vars_start_index;
+	/* set vars start index for next mst hub phy link */
+	*link_vars_start_index += count;
+
 	/* Try no compression */
 	for (i = 0; i < count; i++) {
-		vars[i].aconnector = params[i].aconnector;
-		vars[i].pbn = kbps_to_peak_pbn(params[i].bw_range.stream_kbps);
-		vars[i].dsc_enabled = false;
-		vars[i].bpp_x16 = 0;
+		vars[i + k].aconnector = params[i].aconnector;
+		vars[i + k].pbn = kbps_to_peak_pbn(params[i].bw_range.stream_kbps);
+		vars[i + k].dsc_enabled = false;
+		vars[i + k].bpp_x16 = 0;
 		if (drm_dp_atomic_find_vcpi_slots(state,
 						 params[i].port->mgr,
 						 params[i].port,
-						 vars[i].pbn,
+						 vars[i + k].pbn,
 						 dm_mst_get_pbn_divider(dc_link)) < 0)
 			return false;
 	}
 	if (!drm_dp_mst_atomic_check(state) && !debugfs_overwrite) {
-		set_dsc_configs_from_fairness_vars(params, vars, count);
+		set_dsc_configs_from_fairness_vars(params, vars, count, k);
 		return true;
 	}
 
 	/* Try max compression */
 	for (i = 0; i < count; i++) {
 		if (params[i].compression_possible && params[i].clock_force_enable != DSC_CLK_FORCE_DISABLE) {
-			vars[i].pbn = kbps_to_peak_pbn(params[i].bw_range.min_kbps);
-			vars[i].dsc_enabled = true;
-			vars[i].bpp_x16 = params[i].bw_range.min_target_bpp_x16;
+			vars[i + k].pbn = kbps_to_peak_pbn(params[i].bw_range.min_kbps);
+			vars[i + k].dsc_enabled = true;
+			vars[i + k].bpp_x16 = params[i].bw_range.min_target_bpp_x16;
 			if (drm_dp_atomic_find_vcpi_slots(state,
 							  params[i].port->mgr,
 							  params[i].port,
-							  vars[i].pbn,
+							  vars[i + k].pbn,
 							  dm_mst_get_pbn_divider(dc_link)) < 0)
 				return false;
 		} else {
-			vars[i].pbn = kbps_to_peak_pbn(params[i].bw_range.stream_kbps);
-			vars[i].dsc_enabled = false;
-			vars[i].bpp_x16 = 0;
+			vars[i + k].pbn = kbps_to_peak_pbn(params[i].bw_range.stream_kbps);
+			vars[i + k].dsc_enabled = false;
+			vars[i + k].bpp_x16 = 0;
 			if (drm_dp_atomic_find_vcpi_slots(state,
 							  params[i].port->mgr,
 							  params[i].port,
-							  vars[i].pbn,
+							  vars[i + k].pbn,
 							  dm_mst_get_pbn_divider(dc_link)) < 0)
 				return false;
 		}
@@ -840,15 +862,76 @@ static bool compute_mst_dsc_configs_for_link(struct drm_atomic_state *state,
 		return false;
 
 	/* Optimize degree of compression */
-	increase_dsc_bpp(state, dc_link, params, vars, count);
+	increase_dsc_bpp(state, dc_link, params, vars, count, k);
 
-	try_disable_dsc(state, dc_link, params, vars, count);
+	try_disable_dsc(state, dc_link, params, vars, count, k);
 
-	set_dsc_configs_from_fairness_vars(params, vars, count);
+	set_dsc_configs_from_fairness_vars(params, vars, count, k);
 
 	return true;
 }
 
+static bool is_dsc_need_re_compute(
+	struct drm_atomic_state *state,
+	struct dc_state *dc_state,
+	struct dc_link *dc_link)
+{
+	int i;
+	bool is_dsc_need_re_compute = false;
+
+	/* only check phy used by mst branch */
+	if (dc_link->type != dc_connection_mst_branch)
+		return false;
+
+	/* check if there is mode change in new request */
+	for (i = 0; i < dc_state->stream_count; i++) {
+		struct amdgpu_dm_connector *aconnector;
+		struct dc_stream_state *stream;
+		struct drm_crtc_state *new_crtc_state;
+		struct drm_connector_state *new_conn_state;
+
+		stream = dc_state->streams[i];
+
+		if (!stream)
+			continue;
+
+		/* check if stream using the same link for mst */
+		if (stream->link != dc_link)
+			continue;
+
+		aconnector = (struct amdgpu_dm_connector *) stream->dm_stream_context;
+		if (!aconnector)
+			continue;
+
+		new_conn_state = drm_atomic_get_new_connector_state(state, &aconnector->base);
+
+		if (!new_conn_state)
+			continue;
+
+		if (IS_ERR(new_conn_state))
+			continue;
+
+		if (!new_conn_state->crtc)
+			continue;
+
+		new_crtc_state = drm_atomic_get_new_crtc_state(state, new_conn_state->crtc);
+
+		if (!new_crtc_state)
+			continue;
+
+		if (IS_ERR(new_crtc_state))
+			continue;
+
+		if (new_crtc_state->enable && new_crtc_state->active) {
+			if (new_crtc_state->mode_changed || new_crtc_state->active_changed ||
+				new_crtc_state->connectors_changed)
+				is_dsc_need_re_compute = true;
+		}
+	}
+
+	return is_dsc_need_re_compute;
+}
+
 bool compute_mst_dsc_configs_for_state(struct drm_atomic_state *state,
 				       struct dc_state *dc_state,
 				       struct dsc_mst_fairness_vars *vars)
@@ -857,6 +940,7 @@ bool compute_mst_dsc_configs_for_state(struct drm_atomic_state *state,
 	struct dc_stream_state *stream;
 	bool computed_streams[MAX_PIPES];
 	struct amdgpu_dm_connector *aconnector;
+	int link_vars_start_index = 0;
 
 	for (i = 0; i < dc_state->stream_count; i++)
 		computed_streams[i] = false;
@@ -881,8 +965,12 @@ bool compute_mst_dsc_configs_for_state(struct drm_atomic_state *state,
 		if (dcn20_remove_stream_from_ctx(stream->ctx->dc, dc_state, stream) != DC_OK)
 			return false;
 
+		if (!is_dsc_need_re_compute(state, dc_state, stream->link))
+			continue;
+
 		mutex_lock(&aconnector->mst_mgr.lock);
-		if (!compute_mst_dsc_configs_for_link(state, dc_state, stream->link, vars)) {
+		if (!compute_mst_dsc_configs_for_link(state, dc_state, stream->link,
+			vars, &link_vars_start_index)) {
 			mutex_unlock(&aconnector->mst_mgr.lock);
 			return false;
 		}
-- 
2.30.2

[PATCH 02/14] drm/amd/display: Fix dcn10_log_hubp_states printf format string

[Aurabindo Pillai]

From: Anson Jacob <Anson.Jacob@amd.com>

Fix spacing issue for the format string.

Addresses-Coverity-ID: 1446765: ("Invalid printf format string")

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
---
 drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index a25732d07222..0b788d794fb3 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -231,7 +231,7 @@ static void dcn10_log_hubp_states(struct dc *dc, void *log_ctx)
 
 		if (!s->blank_en)
 			DTN_INFO("[%2d]:  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh"
-				"%  8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh"
+				"  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh"
 				"  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh  %8xh\n",
 				pool->hubps[i]->inst, dlg_regs->refcyc_h_blank_end, dlg_regs->dlg_vblank_end, dlg_regs->min_dst_y_next_start,
 				dlg_regs->refcyc_per_htotal, dlg_regs->refcyc_x_after_scaler, dlg_regs->dst_y_after_scaler,
-- 
2.30.2

[PATCH 03/14] drm/amd/display: Fix dummy p-state hang on monitors with extreme timing

[Aurabindo Pillai]

From: Felipe Clark <felclark@amd.com>

[WHY]
It was found that the system would hang on a dummy pstate when playing
4k60 videos on a 1080p 390Hz monitor.

[HOW]
Properly select the dummy_pstate_latency_ms when firmware assisted
memory clock switching is enabled instead of assuming that the highest
latency would work for every monitor timing.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Felipe Clark <felclark@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
---
 drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c
index e50c695e3c96..79a66e0c4303 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c
@@ -2128,10 +2128,10 @@ static noinline void dcn30_calculate_wm_and_dlg_fp(
 		int pipe_cnt,
 		int vlevel)
 {
+	int maxMpcComb = context->bw_ctx.dml.vba.maxMpcComb;
 	int i, pipe_idx;
-	double dcfclk = context->bw_ctx.dml.vba.DCFCLKState[vlevel][context->bw_ctx.dml.vba.maxMpcComb];
-	bool pstate_en = context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][context->bw_ctx.dml.vba.maxMpcComb] !=
-			dm_dram_clock_change_unsupported;
+	double dcfclk = context->bw_ctx.dml.vba.DCFCLKState[vlevel][maxMpcComb];
+	bool pstate_en = context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][maxMpcComb] != dm_dram_clock_change_unsupported;
 
 	if (context->bw_ctx.dml.soc.min_dcfclk > dcfclk)
 		dcfclk = context->bw_ctx.dml.soc.min_dcfclk;
@@ -2207,6 +2207,7 @@ static noinline void dcn30_calculate_wm_and_dlg_fp(
 		context->bw_ctx.dml.soc.sr_enter_plus_exit_time_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_C].dml_input.sr_enter_plus_exit_time_us;
 		context->bw_ctx.dml.soc.sr_exit_time_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_C].dml_input.sr_exit_time_us;
 	}
+
 	context->bw_ctx.bw.dcn.watermarks.c.urgent_ns = get_wm_urgent(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
 	context->bw_ctx.bw.dcn.watermarks.c.cstate_pstate.cstate_enter_plus_exit_ns = get_wm_stutter_enter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
 	context->bw_ctx.bw.dcn.watermarks.c.cstate_pstate.cstate_exit_ns = get_wm_stutter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
-- 
2.30.2

[PATCH 04/14] drm/amd/display: avoid link loss short pulse stuck the system

[Aurabindo Pillai]

From: Yu-ting Shen <yu-tshen@amd.com>

[Why]
MST monitor sends link loss short pulse continuous but sink is
occupy by HDMI input to lead link training fail.

[How]
disable link once retraining fail.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Yu-ting Shen <yu-tshen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 2796bdd17de1..f14f71dd1aa9 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -4279,6 +4279,8 @@ void core_link_enable_stream(
 			 */
 			if (status != DC_FAIL_DP_LINK_TRAINING ||
 					pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST) {
+				if (false == stream->link->link_status.link_active)
+					disable_link(stream->link, pipe_ctx->stream->signal);
 				BREAK_TO_DEBUGGER();
 				return;
 			}
-- 
2.30.2

[PATCH 05/14] drm/amd/display: Fix bpc calculation for specific encodings

[Aurabindo Pillai]

From: Bing Guo <Bing.Guo@amd.com>

[Why]
1. YCbCr 4:2:2 8bpc/10bpc modes are blocked for HDMI by policy
2. A YCbCr 4:2:0 calculation error blocked some 4:2:0 timing modes

[How]
YCbCr 4:2:2 8bpc/10bpc modes are allowed for HDMI
Fix YCbCr 4:2:0 calculation error

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Bing Guo <Bing.Guo@amd.com>
Reviewed-by: Chris Park <chris.park@amd.com>
---
 .../amd/display/dc/dml/dcn30/display_mode_vba_30.c | 13 +++----------
 .../amd/display/dc/dml/dcn31/display_mode_vba_31.c | 14 +++++---------
 2 files changed, 8 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c b/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c
index e3d9f1decdfc..f47d82da115c 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c
@@ -3576,16 +3576,9 @@ static double TruncToValidBPP(
 		MinDSCBPP = 8;
 		MaxDSCBPP = 3 * DSCInputBitPerComponent - 1.0 / 16;
 	} else {
-		if (Output == dm_hdmi) {
-			NonDSCBPP0 = 24;
-			NonDSCBPP1 = 24;
-			NonDSCBPP2 = 24;
-		}
-		else {
-			NonDSCBPP0 = 16;
-			NonDSCBPP1 = 20;
-			NonDSCBPP2 = 24;
-		}
+		NonDSCBPP0 = 16;
+		NonDSCBPP1 = 20;
+		NonDSCBPP2 = 24;
 
 		if (Format == dm_n422) {
 			MinDSCBPP = 7;
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c b/drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c
index d58925cff420..7e937bdcea00 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c
@@ -3892,15 +3892,11 @@ static double TruncToValidBPP(
 		MinDSCBPP = 8;
 		MaxDSCBPP = 3 * DSCInputBitPerComponent - 1.0 / 16;
 	} else {
-		if (Output == dm_hdmi) {
-			NonDSCBPP0 = 24;
-			NonDSCBPP1 = 24;
-			NonDSCBPP2 = 24;
-		} else {
-			NonDSCBPP0 = 16;
-			NonDSCBPP1 = 20;
-			NonDSCBPP2 = 24;
-		}
+
+		NonDSCBPP0 = 16;
+		NonDSCBPP1 = 20;
+		NonDSCBPP2 = 24;
+
 		if (Format == dm_n422) {
 			MinDSCBPP = 7;
 			MaxDSCBPP = 2 * DSCInputBitPerComponent - 1.0 / 16.0;
-- 
2.30.2

[PATCH 06/14] drm/amd/display: Force disable planes on any pipe split change

[Aurabindo Pillai]

From: Roman Li <Roman.Li@amd.com>

[Why]
In scenario when 1 display connected with pipe split (2 pipes in use)
and 3 new displays simultaneously hotplugged via MST hub (4 pipes in use),
mpcc may get reprogram to other vtg, remaining busy.
In this case waiting for mpcc idle timeouts with error like this:
[drm] REG_WAIT timeout 1us * 100000 tries - mpc2_assert_idle_mpcc
RIP: 0010:mpc2_assert_mpcc_idle_before_connect
Call Trace:
dcn20_update_mpcc
dcn20_program_front_end_for_ctx
dc_commit_state
amdgpu_dm_atomic_commit_tail
...

[How]
Add pipe split change condition to disable dangling plane.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 12e5470fa567..11a00e4d9e81 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -1085,6 +1085,8 @@ static void disable_dangling_plane(struct dc *dc, struct dc_state *context)
 		struct dc_stream_state *old_stream =
 				dc->current_state->res_ctx.pipe_ctx[i].stream;
 		bool should_disable = true;
+		bool pipe_split_change =
+			context->res_ctx.pipe_ctx[i].top_pipe != dc->current_state->res_ctx.pipe_ctx[i].top_pipe;
 
 		for (j = 0; j < context->stream_count; j++) {
 			if (old_stream == context->streams[j]) {
@@ -1092,6 +1094,9 @@ static void disable_dangling_plane(struct dc *dc, struct dc_state *context)
 				break;
 			}
 		}
+		if (!should_disable && pipe_split_change)
+			should_disable = true;
+
 		if (should_disable && old_stream) {
 			dc_rem_all_planes_for_stream(dc, old_stream, dangling_context);
 			disable_all_writeback_pipes_for_stream(dc, old_stream, dangling_context);
-- 
2.30.2

[PATCH 07/14] drm/amd/display: Clear encoder assignments when state cleared.

[Aurabindo Pillai]

From: Jimmy Kizito <Jimmy.Kizito@amd.com>

[Why]
State can be cleared without removing individual streams (by
calling dc_remove_stream_from_ctx()). This can leave the
encoder assignment module in an incoherent state and cause
future assignments to be incorrect.

[How]
Clear encoder assignments when committing 0 streams or
re-initializing hardware.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
---
 .../drm/amd/display/dc/core/dc_link_enc_cfg.c | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_enc_cfg.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_enc_cfg.c
index 72b0f8594b4a..25e48a8cbb78 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_enc_cfg.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_enc_cfg.c
@@ -236,6 +236,23 @@ static struct link_encoder *get_link_enc_used_by_link(
 
 	return link_enc;
 }
+/* Clear all link encoder assignments. */
+static void clear_enc_assignments(struct dc_state *state)
+{
+	int i;
+	enum engine_id eng_id;
+	struct dc_stream_state *stream;
+
+	for (i = 0; i < MAX_PIPES; i++) {
+		state->res_ctx.link_enc_cfg_ctx.link_enc_assignments[i].valid = false;
+		eng_id = state->res_ctx.link_enc_cfg_ctx.link_enc_assignments[i].eng_id;
+		stream = state->res_ctx.link_enc_cfg_ctx.link_enc_assignments[i].stream;
+		if (eng_id != ENGINE_ID_UNKNOWN)
+			state->res_ctx.link_enc_cfg_ctx.link_enc_avail[eng_id - ENGINE_ID_DIGA] = eng_id;
+		if (stream)
+			stream->link_enc = NULL;
+	}
+}
 
 void link_enc_cfg_init(
 		struct dc *dc,
@@ -250,6 +267,8 @@ void link_enc_cfg_init(
 			state->res_ctx.link_enc_cfg_ctx.link_enc_avail[i] = ENGINE_ID_UNKNOWN;
 	}
 
+	clear_enc_assignments(state);
+
 	state->res_ctx.link_enc_cfg_ctx.mode = LINK_ENC_CFG_STEADY;
 }
 
@@ -265,6 +284,9 @@ void link_enc_cfg_link_encs_assign(
 
 	ASSERT(state->stream_count == stream_count);
 
+	if (stream_count == 0)
+		clear_enc_assignments(state);
+
 	/* Release DIG link encoder resources before running assignment algorithm. */
 	for (i = 0; i < stream_count; i++)
 		dc->res_pool->funcs->link_enc_unassign(state, streams[i]);
-- 
2.30.2

[PATCH 08/14] drm/amd/display: fix register write sequence for LINK_SQUARE_PATTERN

[Aurabindo Pillai]

From: Wenjing Liu <wenjing.liu@amd.com>

[why&how]
write LINK_SQUARE_PATTERN_num + 1 for square pulse pattern.
Specs requirement to write this register prior to write LINK_QUAL_LANEX_SET.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <george.shen@amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 8 ++++++++
 drivers/gpu/drm/amd/display/dc/dc_dp_types.h     | 3 +++
 2 files changed, 11 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index cc25ba0ec7db..cb7bf9148904 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -5329,6 +5329,14 @@ bool dc_link_dp_set_test_pattern(
 			return false;
 
 		if (link->dpcd_caps.dpcd_rev.raw >= DPCD_REV_12) {
+#if defined(CONFIG_DRM_AMD_DC_DCN)
+			if (test_pattern == DP_TEST_PATTERN_SQUARE_PULSE)
+				core_link_write_dpcd(link,
+						DP_LINK_SQUARE_PATTERN,
+						p_custom_pattern,
+						1);
+
+#endif
 			/* tell receiver that we are sending qualification
 			 * pattern DP 1.2 or later - DP receiver's link quality
 			 * pattern is set using DPCD LINK_QUAL_LANEx_SET
diff --git a/drivers/gpu/drm/amd/display/dc/dc_dp_types.h b/drivers/gpu/drm/amd/display/dc/dc_dp_types.h
index bc87ea0adf94..e68e9a86a4d9 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_dp_types.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_dp_types.h
@@ -898,6 +898,9 @@ struct dpcd_usb4_dp_tunneling_info {
 #ifndef DP_DFP_CAPABILITY_EXTENSION_SUPPORT
 #define DP_DFP_CAPABILITY_EXTENSION_SUPPORT		0x0A3
 #endif
+#ifndef DP_LINK_SQUARE_PATTERN
+#define DP_LINK_SQUARE_PATTERN				0x10F
+#endif
 #ifndef DP_DSC_CONFIGURATION
 #define DP_DSC_CONFIGURATION				0x161
 #endif
-- 
2.30.2

[PATCH 09/14] drm/amd/display: Added HPO HW control shutdown support

[Aurabindo Pillai]

From: Jake Wang <haonan.wang2@amd.com>

[Why]
HPO is only used for DP2.0. HPO HW control should be
disable when not being used to save power.

[How]
Shutdown HPO HW control during init hw.
Shutdown HPO HW control during stream disable.
Enable HPO HW control during stream enable if DP2.0.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
---
 drivers/gpu/drm/amd/display/dc/dc.h                      | 1 +
 drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h           | 4 +++-
 .../gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c  | 6 ++++++
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c       | 3 +++
 drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c       | 9 +++++++++
 drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.h       | 1 +
 drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c        | 1 +
 drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c    | 6 ++++--
 .../gpu/drm/amd/display/dc/inc/hw_sequencer_private.h    | 1 +
 9 files changed, 29 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index a5339796902a..e9bac161fd25 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -675,6 +675,7 @@ struct dc_debug_options {
 #endif
 	union mem_low_power_enable_options enable_mem_low_power;
 	union root_clock_optimization_options root_clock_optimization;
+	bool hpo_optimization;
 	bool force_vblank_alignment;
 
 	/* Enable dmub aux for legacy ddc */
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h b/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h
index 989f5b6907e2..a3fee929cd12 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h
@@ -671,6 +671,7 @@ struct dce_hwseq_registers {
 	uint32_t MC_VM_FB_LOCATION_BASE;
 	uint32_t MC_VM_FB_LOCATION_TOP;
 	uint32_t MC_VM_FB_OFFSET;
+	uint32_t HPO_TOP_HW_CONTROL;
 };
  /* set field name */
 #define HWS_SF(blk_name, reg_name, field_name, post_fix)\
@@ -1152,7 +1153,8 @@ struct dce_hwseq_registers {
 	type DOMAIN_PGFSM_PWR_STATUS;\
 	type HPO_HDMISTREAMCLK_G_GATE_DIS;\
 	type DISABLE_HOSTVM_FORCE_ALLOW_PSTATE;\
-	type I2C_LIGHT_SLEEP_FORCE;
+	type I2C_LIGHT_SLEEP_FORCE;\
+	type HPO_IO_EN;
 
 struct dce_hwseq_shift {
 	HWSEQ_REG_FIELD_LIST(uint8_t)
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index af3e68d3e747..24e47df526f6 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -1244,6 +1244,12 @@ void dce110_disable_stream(struct pipe_ctx *pipe_ctx)
 #endif
 	if (dc_is_dp_signal(pipe_ctx->stream->signal))
 		dp_source_sequence_trace(link, DPCD_SOURCE_SEQ_AFTER_DISCONNECT_DIG_FE_BE);
+
+#if defined(CONFIG_DRM_AMD_DC_DCN)
+	if (dc->hwseq->funcs.setup_hpo_hw_control && is_dp_128b_132b_signal(pipe_ctx))
+		dc->hwseq->funcs.setup_hpo_hw_control(dc->hwseq, false);
+#endif
+
 }
 
 void dce110_unblank_stream(struct pipe_ctx *pipe_ctx,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index cfee456c6c9a..4f88376a118f 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -2397,6 +2397,9 @@ void dcn20_enable_stream(struct pipe_ctx *pipe_ctx)
 	 * BY this, it is logic clean to separate stream and link
 	 */
 	if (is_dp_128b_132b_signal(pipe_ctx)) {
+		if (pipe_ctx->stream->ctx->dc->hwseq->funcs.setup_hpo_hw_control)
+			pipe_ctx->stream->ctx->dc->hwseq->funcs.setup_hpo_hw_control(
+				pipe_ctx->stream->ctx->dc->hwseq, true);
 		setup_dp_hpo_stream(pipe_ctx, true);
 		pipe_ctx->stream_res.hpo_dp_stream_enc->funcs->enable_stream(
 				pipe_ctx->stream_res.hpo_dp_stream_enc);
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c
index d24ad7754d71..1b089893460a 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c
@@ -264,6 +264,9 @@ void dcn31_init_hw(struct dc *dc)
 	if (dc->debug.enable_mem_low_power.bits.i2c)
 		REG_UPDATE(DIO_MEM_PWR_CTRL, I2C_LIGHT_SLEEP_FORCE, 1);
 
+	if (hws->funcs.setup_hpo_hw_control)
+		hws->funcs.setup_hpo_hw_control(hws, false);
+
 	if (!dc->debug.disable_clock_gate) {
 		/* enable all DCN clock gating */
 		REG_WRITE(DCCG_GATE_DISABLE_CNTL, 0);
@@ -597,3 +600,9 @@ void dcn31_reset_hw_ctx_wrap(
 	/* New dc_state in the process of being applied to hardware. */
 	dc->current_state->res_ctx.link_enc_cfg_ctx.mode = LINK_ENC_CFG_TRANSIENT;
 }
+
+void dcn31_setup_hpo_hw_control(const struct dce_hwseq *hws, bool enable)
+{
+	if (hws->ctx->dc->debug.hpo_optimization)
+		REG_UPDATE(HPO_TOP_HW_CONTROL, HPO_IO_EN, !!enable);
+}
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.h b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.h
index 7ae45dd202d9..edfc01d6ad73 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.h
@@ -54,5 +54,6 @@ void dcn31_reset_hw_ctx_wrap(
 bool dcn31_is_abm_supported(struct dc *dc,
 		struct dc_state *context, struct dc_stream_state *stream);
 void dcn31_init_pipes(struct dc *dc, struct dc_state *context);
+void dcn31_setup_hpo_hw_control(const struct dce_hwseq *hws, bool enable);
 
 #endif /* __DC_HWSS_DCN31_H__ */
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c
index c6a737781ad1..05335a8c3c2d 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c
@@ -137,6 +137,7 @@ static const struct hwseq_private_funcs dcn31_private_funcs = {
 	.dccg_init = dcn20_dccg_init,
 	.set_blend_lut = dcn30_set_blend_lut,
 	.set_shaper_3dlut = dcn20_set_shaper_3dlut,
+	.setup_hpo_hw_control = dcn31_setup_hpo_hw_control,
 };
 
 void dcn31_hw_sequencer_construct(struct dc *dc)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
index 6d8a5ffce1d3..a7aeb236a884 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
@@ -860,7 +860,8 @@ static const struct dccg_mask dccg_mask = {
 	SR(D6VGA_CONTROL), \
 	SR(DC_IP_REQUEST_CNTL), \
 	SR(AZALIA_AUDIO_DTO), \
-	SR(AZALIA_CONTROLLER_CLOCK_GATING)
+	SR(AZALIA_CONTROLLER_CLOCK_GATING), \
+	SR(HPO_TOP_HW_CONTROL)
 
 static const struct dce_hwseq_registers hwseq_reg = {
 		HWSEQ_DCN31_REG_LIST()
@@ -898,7 +899,8 @@ static const struct dce_hwseq_registers hwseq_reg = {
 	HWS_SF(, ODM_MEM_PWR_CTRL3, ODM_MEM_UNASSIGNED_PWR_MODE, mask_sh), \
 	HWS_SF(, ODM_MEM_PWR_CTRL3, ODM_MEM_VBLANK_PWR_MODE, mask_sh), \
 	HWS_SF(, MMHUBBUB_MEM_PWR_CNTL, VGA_MEM_PWR_FORCE, mask_sh), \
-	HWS_SF(, DIO_MEM_PWR_CTRL, I2C_LIGHT_SLEEP_FORCE, mask_sh)
+	HWS_SF(, DIO_MEM_PWR_CTRL, I2C_LIGHT_SLEEP_FORCE, mask_sh), \
+	HWS_SF(, HPO_TOP_HW_CONTROL, HPO_IO_EN, mask_sh)
 
 static const struct dce_hwseq_shift hwseq_shift = {
 		HWSEQ_DCN31_MASK_SH_LIST(__SHIFT)
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer_private.h b/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer_private.h
index f324285394be..c2008258c50a 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer_private.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer_private.h
@@ -143,6 +143,7 @@ struct hwseq_private_funcs {
 			const struct dc_plane_state *plane_state);
 	void (*PLAT_58856_wa)(struct dc_state *context,
 			struct pipe_ctx *pipe_ctx);
+	void (*setup_hpo_hw_control)(const struct dce_hwseq *hws, bool enable);
 };
 
 struct dce_hwseq {
-- 
2.30.2

[PATCH 10/14] drm/amd/display: Add MPC meory shutdown support

[Aurabindo Pillai]

From: Jake Wang <haonan.wang2@amd.com>

[Why & How]
The MPC memory clocks should be powered down when not in use.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
---
 .../gpu/drm/amd/display/dc/dcn30/dcn30_mpc.c  |  7 +-
 .../drm/amd/display/dc/dcn31/dcn31_hwseq.c    | 69 +++++++++++--------
 drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h   |  1 +
 3 files changed, 44 insertions(+), 33 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_mpc.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_mpc.c
index a82319f4d081..95149734378b 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_mpc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_mpc.c
@@ -1381,13 +1381,11 @@ int mpcc3_release_rmu(struct mpc *mpc, int mpcc_id)
 
 }
 
-static void mpc3_mpc_init(struct mpc *mpc)
+static void mpc3_set_mpc_mem_lp_mode(struct mpc *mpc)
 {
 	struct dcn30_mpc *mpc30 = TO_DCN30_MPC(mpc);
 	int mpcc_id;
 
-	mpc1_mpc_init(mpc);
-
 	if (mpc->ctx->dc->debug.enable_mem_low_power.bits.mpc) {
 		if (mpc30->mpc_mask->MPC_RMU0_MEM_LOW_PWR_MODE && mpc30->mpc_mask->MPC_RMU1_MEM_LOW_PWR_MODE) {
 			REG_UPDATE(MPC_RMU_MEM_PWR_CTRL, MPC_RMU0_MEM_LOW_PWR_MODE, 3);
@@ -1405,7 +1403,7 @@ const struct mpc_funcs dcn30_mpc_funcs = {
 	.read_mpcc_state = mpc1_read_mpcc_state,
 	.insert_plane = mpc1_insert_plane,
 	.remove_mpcc = mpc1_remove_mpcc,
-	.mpc_init = mpc3_mpc_init,
+	.mpc_init = mpc1_mpc_init,
 	.mpc_init_single_inst = mpc1_mpc_init_single_inst,
 	.update_blending = mpc2_update_blending,
 	.cursor_lock = mpc1_cursor_lock,
@@ -1432,6 +1430,7 @@ const struct mpc_funcs dcn30_mpc_funcs = {
 	.power_on_mpc_mem_pwr = mpc3_power_on_ogam_lut,
 	.get_mpc_out_mux = mpc1_get_mpc_out_mux,
 	.set_bg_color = mpc1_set_bg_color,
+	.set_mpc_mem_lp_mode = mpc3_set_mpc_mem_lp_mode,
 };
 
 void dcn30_mpc_construct(struct dcn30_mpc *mpc30,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c
index 1b089893460a..5dd1ce9ddb53 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c
@@ -66,6 +66,45 @@
 #define FN(reg_name, field_name) \
 	hws->shifts->field_name, hws->masks->field_name
 
+static void enable_memory_low_power(struct dc *dc)
+{
+	struct dce_hwseq *hws = dc->hwseq;
+	int i;
+
+	if (dc->debug.enable_mem_low_power.bits.dmcu) {
+		// Force ERAM to shutdown if DMCU is not enabled
+		if (dc->debug.disable_dmcu || dc->config.disable_dmcu) {
+			REG_UPDATE(DMU_MEM_PWR_CNTL, DMCU_ERAM_MEM_PWR_FORCE, 3);
+		}
+	}
+
+	// Set default OPTC memory power states
+	if (dc->debug.enable_mem_low_power.bits.optc) {
+		// Shutdown when unassigned and light sleep in VBLANK
+		REG_SET_2(ODM_MEM_PWR_CTRL3, 0, ODM_MEM_UNASSIGNED_PWR_MODE, 3, ODM_MEM_VBLANK_PWR_MODE, 1);
+	}
+
+	if (dc->debug.enable_mem_low_power.bits.vga) {
+		// Power down VGA memory
+		REG_UPDATE(MMHUBBUB_MEM_PWR_CNTL, VGA_MEM_PWR_FORCE, 1);
+	}
+
+	if (dc->debug.enable_mem_low_power.bits.mpc)
+		dc->res_pool->mpc->funcs->set_mpc_mem_lp_mode(dc->res_pool->mpc);
+
+
+	if (dc->debug.enable_mem_low_power.bits.vpg && dc->res_pool->stream_enc[0]->vpg->funcs->vpg_powerdown) {
+		// Power down VPGs
+		for (i = 0; i < dc->res_pool->stream_enc_count; i++)
+			dc->res_pool->stream_enc[i]->vpg->funcs->vpg_powerdown(dc->res_pool->stream_enc[i]->vpg);
+#if defined(CONFIG_DRM_AMD_DC_DCN)
+		for (i = 0; i < dc->res_pool->hpo_dp_stream_enc_count; i++)
+			dc->res_pool->hpo_dp_stream_enc[i]->vpg->funcs->vpg_powerdown(dc->res_pool->hpo_dp_stream_enc[i]->vpg);
+#endif
+	}
+
+}
+
 void dcn31_init_hw(struct dc *dc)
 {
 	struct abm **abms = dc->res_pool->multiple_abms;
@@ -108,35 +147,7 @@ void dcn31_init_hw(struct dc *dc)
 	if (res_pool->dccg->funcs->dccg_init)
 		res_pool->dccg->funcs->dccg_init(res_pool->dccg);
 
-	if (dc->debug.enable_mem_low_power.bits.dmcu) {
-		// Force ERAM to shutdown if DMCU is not enabled
-		if (dc->debug.disable_dmcu || dc->config.disable_dmcu) {
-			REG_UPDATE(DMU_MEM_PWR_CNTL, DMCU_ERAM_MEM_PWR_FORCE, 3);
-		}
-	}
-
-	// Set default OPTC memory power states
-	if (dc->debug.enable_mem_low_power.bits.optc) {
-		// Shutdown when unassigned and light sleep in VBLANK
-		REG_SET_2(ODM_MEM_PWR_CTRL3, 0, ODM_MEM_UNASSIGNED_PWR_MODE, 3, ODM_MEM_VBLANK_PWR_MODE, 1);
-	}
-
-	if (dc->debug.enable_mem_low_power.bits.vga) {
-		// Power down VGA memory
-		REG_UPDATE(MMHUBBUB_MEM_PWR_CNTL, VGA_MEM_PWR_FORCE, 1);
-	}
-
-#if defined(CONFIG_DRM_AMD_DC_DCN)
-	if (dc->debug.enable_mem_low_power.bits.vpg && dc->res_pool->stream_enc[0]->vpg->funcs->vpg_powerdown) {
-		// Power down VPGs
-		for (i = 0; i < dc->res_pool->stream_enc_count; i++)
-			dc->res_pool->stream_enc[i]->vpg->funcs->vpg_powerdown(dc->res_pool->stream_enc[i]->vpg);
-#if defined(CONFIG_DRM_AMD_DC_DP2_0)
-		for (i = 0; i < dc->res_pool->hpo_dp_stream_enc_count; i++)
-			dc->res_pool->hpo_dp_stream_enc[i]->vpg->funcs->vpg_powerdown(dc->res_pool->hpo_dp_stream_enc[i]->vpg);
-#endif
-	}
-#endif
+	enable_memory_low_power(dc);
 
 	if (dc->ctx->dc_bios->fw_info_valid) {
 		res_pool->ref_clocks.xtalin_clock_inKhz =
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h b/drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h
index 04d6ec3f021f..f5fd2a067323 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h
@@ -367,6 +367,7 @@ struct mpc_funcs {
 	void (*set_bg_color)(struct mpc *mpc,
 			struct tg_color *bg_color,
 			int mpcc_id);
+	void (*set_mpc_mem_lp_mode)(struct mpc *mpc);
 };
 
 #endif
-- 
2.30.2

[PATCH 11/14] drm/amd/display: Added new DMUB boot option for power optimization

[Aurabindo Pillai]

From: Jake Wang <haonan.wang2@amd.com>

[Why]
During Z10, root clock gating and memory low power registers needs to
to be restored if optimization is enabled in driver.

[How]
Added new DMUB boot option for root clock gating and memory low power.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
---
 drivers/gpu/drm/amd/display/dmub/dmub_srv.h       | 1 +
 drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dmub/dmub_srv.h b/drivers/gpu/drm/amd/display/dmub/dmub_srv.h
index 717c0e572d2f..cd204eef073b 100644
--- a/drivers/gpu/drm/amd/display/dmub/dmub_srv.h
+++ b/drivers/gpu/drm/amd/display/dmub/dmub_srv.h
@@ -238,6 +238,7 @@ struct dmub_srv_hw_params {
 	bool load_inst_const;
 	bool skip_panel_power_sequence;
 	bool disable_z10;
+	bool power_optimization;
 	bool dpia_supported;
 	bool disable_dpia;
 };
diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c
index 10ebf20eaa41..fa0569174aec 100644
--- a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c
+++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c
@@ -340,6 +340,7 @@ void dmub_dcn31_enable_dmub_boot_options(struct dmub_srv *dmub, const struct dmu
 	boot_options.bits.z10_disable = params->disable_z10;
 	boot_options.bits.dpia_supported = params->dpia_supported;
 	boot_options.bits.enable_dpia = params->disable_dpia ? 0 : 1;
+	boot_options.bits.power_optimization = params->power_optimization;
 
 	boot_options.bits.sel_mux_phy_c_d_phy_f_g = (dmub->asic == DMUB_ASIC_DCN31B) ? 1 : 0;
 
-- 
2.30.2

[PATCH 12/14] drm/amd/display: add condition check for dmub notification

[Aurabindo Pillai]

[Why & How]
In order to have dc_enable_dmub_notifications() more precise, add
one more condition to check if dc->debug.dpia_debug.bits.disable_dpia
is false.

Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 11a00e4d9e81..398de46fb7e4 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -3608,7 +3608,8 @@ bool dc_enable_dmub_notifications(struct dc *dc)
 #if defined(CONFIG_DRM_AMD_DC_DCN)
 	/* YELLOW_CARP B0 USB4 DPIA needs dmub notifications for interrupts */
 	if (dc->ctx->asic_id.chip_family == FAMILY_YELLOW_CARP &&
-	    dc->ctx->asic_id.hw_internal_rev == YELLOW_CARP_B0)
+	    dc->ctx->asic_id.hw_internal_rev == YELLOW_CARP_B0 &&
+	    !dc->debug.dpia_debug.bits.disable_dpia)
 		return true;
 #endif
 	/* dmub aux needs dmub notifications to be enabled */
-- 
2.30.2

[PATCH 13/14] drm/amd/display: [FW Promotion] Release 0.0.91

[Aurabindo Pillai]

From: Anthony Koo <Anthony.Koo@amd.com>

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
---
 drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
index 6a79818337a1..1c4cac4a4894 100644
--- a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
+++ b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
@@ -47,10 +47,10 @@
 
 /* Firmware versioning. */
 #ifdef DMUB_EXPOSE_VERSION
-#define DMUB_FW_VERSION_GIT_HASH 0x9525efb5
+#define DMUB_FW_VERSION_GIT_HASH 0x1d82d23e
 #define DMUB_FW_VERSION_MAJOR 0
 #define DMUB_FW_VERSION_MINOR 0
-#define DMUB_FW_VERSION_REVISION 90
+#define DMUB_FW_VERSION_REVISION 91
 #define DMUB_FW_VERSION_TEST 0
 #define DMUB_FW_VERSION_VBIOS 0
 #define DMUB_FW_VERSION_HOTFIX 0
-- 
2.30.2

[PATCH 14/14] drm/amd/display: 3.2.160

[Aurabindo Pillai]

From: Aric Cyr <aric.cyr@amd.com>

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
---
 drivers/gpu/drm/amd/display/dc/dc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index e9bac161fd25..3aac3f4a2852 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -47,7 +47,7 @@ struct aux_payload;
 struct set_config_cmd_payload;
 struct dmub_notification;
 
-#define DC_VER "3.2.159"
+#define DC_VER "3.2.160"
 
 #define MAX_SURFACES 3
 #define MAX_PLANES 6
-- 
2.30.2

RE: [PATCH 00/14] DC patches for Nov 1, 2021

[Wheeler, Daniel]

[Public]

Hi all,
 
This week this patchset was tested on the following systems:
 
HP Envy 360, with Ryzen 5 4500U, with the following display types: eDP 1080p 60hz, 4k 60hz  (via USB-C to DP/HDMI), 1440p 144hz (via USB-C to DP/HDMI), 1680*1050 60hz (via USB-C to DP and then DP to DVI/VGA)
 
AMD Ryzen 9 5900H, with the following display types: eDP 1080p 60hz, 4k 60hz  (via USB-C to DP/HDMI), 1440p 144hz (via USB-C to DP/HDMI), 1680*1050 60hz (via USB-C to DP and then DP to DVI/VGA)
 
Sapphire Pulse RX5700XT with the following display types:
4k 60hz  (via DP/HDMI), 1440p 144hz (via DP/HDMI), 1680*1050 60hz (via DP to DVI/VGA)
 
Reference AMD RX6800 with the following display types:
4k 60hz  (via DP/HDMI and USB-C to DP/HDMI), 1440p 144hz (via USB-C to DP/HDMI and USB-C to DP/HDMI), 1680*1050 60hz (via DP to DVI/VGA)
 
Included testing using a Startech DP 1.4 MST hub at 2x 4k 60hz, and 3x 1080p 60hz on all systems. Also tested DSC via USB-C to DP DSC Hub with 3x 4k 60hz on Ryzen 9 5900h and Ryzen 5 4500u.
 
Tested on Ubuntu 20.04.3 with Kernel Version 5.13 and ChromeOS
 
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
 
 
Thank you,
 
Dan Wheeler
Technologist  |  AMD
SW Display
------------------------------------------------------------------------------------------------------------------
1 Commerce Valley Dr E, Thornhill, ON L3T 7X6
Facebook |  Twitter |  amd.com  

-----Original Message-----
From: amd-gfx <amd-gfx-bounces@lists.freedesktop.org> On Behalf Of Aurabindo Pillai
Sent: October 29, 2021 11:15 AM
To: amd-gfx@lists.freedesktop.org
Cc: Wentland, Harry <Harry.Wentland@amd.com>; Li, Sun peng (Leo) <Sunpeng.Li@amd.com>; Lakha, Bhawanpreet <Bhawanpreet.Lakha@amd.com>; Siqueira, Rodrigo <Rodrigo.Siqueira@amd.com>; Pillai, Aurabindo <Aurabindo.Pillai@amd.com>; Zhuo, Qingqing <Qingqing.Zhuo@amd.com>; Lipski, Mikita <Mikita.Lipski@amd.com>; Li, Roman <Roman.Li@amd.com>; Jacob, Anson <Anson.Jacob@amd.com>; Lin, Wayne <Wayne.Lin@amd.com>; Wang, Chao-kai (Stylon) <Stylon.Wang@amd.com>; Chiu, Solomon <Solomon.Chiu@amd.com>; Kotarac, Pavle <Pavle.Kotarac@amd.com>; Gutierrez, Agustin <Agustin.Gutierrez@amd.com>
Subject: [PATCH 00/14] DC patches for Nov 1, 2021

This DC patchset brings improvements in multiple areas. In summary, we highlight:

* DC release version 3.2.160
* DMUB fw version 0.0.91 and bug fixes
* DSC related fixes
* Minor power optimization improvements
* Bug fixes and improvements in display pipeline

-------------------------------

Anson Jacob (1):
  drm/amd/display: Fix dcn10_log_hubp_states printf format string

Anthony Koo (1):
  drm/amd/display: [FW Promotion] Release 0.0.91

Aric Cyr (1):
  drm/amd/display: 3.2.160

Aurabindo Pillai (1):
  drm/amd/display: add condition check for dmub notification

Bing Guo (1):
  drm/amd/display: Fix bpc calculation for specific encodings

Felipe Clark (1):
  drm/amd/display: Fix dummy p-state hang on monitors with extreme
    timing

Hersen Wu (1):
  drm/amd/display: dsc engine not disabled after unplug dsc mst hub

Jake Wang (3):
  drm/amd/display: Added HPO HW control shutdown support
  drm/amd/display: Add MPC meory shutdown support
  drm/amd/display: Added new DMUB boot option for power optimization

Jimmy Kizito (1):
  drm/amd/display: Clear encoder assignments when state cleared.

Roman Li (1):
  drm/amd/display: Force disable planes on any pipe split change

Wenjing Liu (1):
  drm/amd/display: fix register write sequence for LINK_SQUARE_PATTERN

Yu-ting Shen (1):
  drm/amd/display: avoid link loss short pulse stuck the system

 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |  31 ++--
 .../display/amdgpu_dm/amdgpu_dm_mst_types.c   | 150 ++++++++++++++----
 drivers/gpu/drm/amd/display/dc/core/dc.c      |   8 +-
 drivers/gpu/drm/amd/display/dc/core/dc_link.c |   2 +
 .../gpu/drm/amd/display/dc/core/dc_link_dp.c  |   8 +
 .../drm/amd/display/dc/core/dc_link_enc_cfg.c |  22 +++
 drivers/gpu/drm/amd/display/dc/dc.h           |   3 +-
 drivers/gpu/drm/amd/display/dc/dc_dp_types.h  |   3 +
 .../gpu/drm/amd/display/dc/dce/dce_hwseq.h    |   4 +-
 .../display/dc/dce110/dce110_hw_sequencer.c   |   6 +
 .../amd/display/dc/dcn10/dcn10_hw_sequencer.c |   2 +-
 .../drm/amd/display/dc/dcn20/dcn20_hwseq.c    |   3 +
 .../gpu/drm/amd/display/dc/dcn30/dcn30_mpc.c  |   7 +-
 .../drm/amd/display/dc/dcn30/dcn30_resource.c |   7 +-
 .../drm/amd/display/dc/dcn31/dcn31_hwseq.c    |  78 +++++----
 .../drm/amd/display/dc/dcn31/dcn31_hwseq.h    |   1 +
 .../gpu/drm/amd/display/dc/dcn31/dcn31_init.c |   1 +
 .../drm/amd/display/dc/dcn31/dcn31_resource.c |   6 +-
 .../dc/dml/dcn30/display_mode_vba_30.c        |  13 +-
 .../dc/dml/dcn31/display_mode_vba_31.c        |  14 +-
 drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h   |   1 +
 .../amd/display/dc/inc/hw_sequencer_private.h |   1 +
 drivers/gpu/drm/amd/display/dmub/dmub_srv.h   |   1 +
 .../gpu/drm/amd/display/dmub/inc/dmub_cmd.h   |   4 +-
 .../gpu/drm/amd/display/dmub/src/dmub_dcn31.c |   1 +
 25 files changed, 271 insertions(+), 106 deletions(-)

-- 
2.30.2