[PATCH 07/13] power: supply: bq25890: Enable charging on boards where we skip reset

[Hans de Goede <hdegoede@redhat.com>]

On boards where the "ti,skip-init" boolean property is set we don't reset
the charger; and on some boards where the fw takes care of initalizition
F_CHG_CFG is set to 0 before handing control over to the OS.

Explicitly set F_CHG_CFG to 1 on boards where we don't reset the charger,
so that charging is always enabled on these boards, like it is always
enabled on boards where we do reset the charger.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/power/supply/bq25890_charger.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
index 280821a6a6c6..aa4d04d20cdc 100644
--- a/drivers/power/supply/bq25890_charger.c
+++ b/drivers/power/supply/bq25890_charger.c
@@ -689,6 +689,17 @@ static int bq25890_hw_init(struct bq25890_device *bq)
 			dev_dbg(bq->dev, "Reset failed %d\n", ret);
 			return ret;
 		}
+	} else {
+		/*
+		 * Ensure charging is enabled, on some boards where the fw
+		 * takes care of initalizition F_CHG_CFG is set to 0 before
+		 * handing control over to the OS.
+		 */
+		ret = bq25890_field_write(bq, F_CHG_CFG, 1);
+		if (ret < 0) {
+			dev_dbg(bq->dev, "Enabling charging failed %d\n", ret);
+			return ret;
+		}
 	}
 
 	/* disable watchdog */
-- 
2.31.1